Items with Subject: water management

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abotaleb, I S (2018) Construction dispute mitigation: quantitative and qualitative analytic approach with a focus on bidding, out-of-sequence work, and contract analysis. PhD thesis, University of Tennessee, USA.

Adebara, T M (2024) Exploring the temporary appropriation of marginal open spaces in urban residential neighbourhoods. Journal of Construction in Developing Countries, 29(1), pp. 47-65. ISSN 1823-6499

Adelekan, S; Wamuziri, S and Binsardi, B (2013) Evaluation of islamic financing products for housing and infrastructure development. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Adibfar, A (2020) Bridge digital twins: Fusion of intelligent transportation systems (ITS) sensor data and bridge information modeling (BRIM) for interoperability. PhD thesis, University of Florida, USA.

Adibzadeh, S; Adibzadeh, B and Akbari, A (2025) Environmental components affecting location in iran's national housing planning. International Journal of Construction Management, 25(16), pp. 2020-2029. ISSN 1562-3599

Adjei, S; Ankrah, N; Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Ahmad, A G and Rahman, H F A (2010) Treatment of salt attack and rising damp in heritage buildings in Penang, Malaysia. Journal of Construction in Developing Countries, 15(1), pp. 93-113. ISSN 1823-6499

Ahmadi, S Y; Lather, J I; Wittich, C E and Madson, K (2025) Current and future trends for resilient inland waterway transportation systems during flood disruptions. Journal of Construction Engineering and Management, 151(6): 04025046, ISSN 0733-9364

Ajelabi, I K (2013) Product based project portfolio and information sharing. PhD thesis, University of Reading, UK.

Al-Musleh, A M (2011) Development of a framework for total quality management principles in the construction companies with special reference to the construction companies in the state of Qatar. PhD thesis, Queen Mary University of London, UK.

Al-Shaeer, H A Y; Irwan, J M; Alshalif, A; Amran, M; Alanazi, H; Tang, W C; Tang, L; Alhokabi, A and Alluqmani, A E (2026) Enhancing carbonation resistance of foamed concrete via microbial incorporation: A response surface methodology approach with aspergillus iizukae ean605 fungi. International Journal of Building Pathology and Adaptation, 44(1), pp. 266-294. ISSN 2398-4708

Albagoury, S. H. and AbdelMaksoud, K. M. (2026) Integrating socio-economic impact assessment into the reconstruction plan for Derna, Libya. International Journal of Disaster Resilience in the Built Environment, pp. 1-13. ISSN 1759-5908

Albert, I (2020) A lean production approach to materials management in the Nigerian construction industry. PhD thesis, Nelson Mandela University, South Africa.

Albuquerque, F and Bersanetti, F (2024) Servitization and construction industry: Ideas and insights from the commercial building sector. International Journal of Construction Management, 24(2), pp. 109-123. ISSN 1562-3599

Alghadeer, Abdulaziz I (2013) Influence of socio-cultural and technological factors on the adoption of the project management office (pmo) in Saudi Arabia: An innovation diffusion perspective. PhD thesis, Griffith University, Saudi Arabia.

Aliero, B A (1994) Utilisation of environmental impact assessment technique in the assessment of impact of human interference on natural ecology of estuaries: a case study of Mersey Estuary. PhD thesis, University of Salford, UK.

Along, N Z B; Ahmed, I and MacKee, J (2024) Flood knowledge management by multiple stakeholders: An example from Malaysia. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 141-157. ISSN 1759-5916

Amin, R A (2016) Condition-based maintenance: innovation in building maintenance management. PhD thesis, University College London, UK.

Andreasen, M H; Agergaard, J; Kofie, R Y; Møller-Jensen, L and Oteng-Ababio, M (2022) Urban encroachment in ecologically sensitive areas: Drivers, impediments and consequences. Buildings & Cities, 3(1), pp. 920-938. ISSN 2632-6655

Anh Tuan, B L; Tesfamariam, M G; Chen, Y Y; Hwang, C L; Lin, K L and Young, M P (2014) Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. Journal of Construction Engineering and Management, 140(5): 04014005, ISSN 0733-9364

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Ansari, S (2020) Investigating the energy performance of a multiuse venue building. EngD thesis, University of Reading, UK.

Anvuur, A M; Kumaraswamy, M M and Mahesh, G (2011) Building relationally integrated value networks (RIVANS). Engineering, Construction and Architectural Management, 18(1), pp. 102-120. ISSN 0969-9988

Apipattanavis, S (2007) Stochastic nonparametric methods for multi-site weather generation and flood frequency estimation: Applications to construction delay, hydrology and agricultural modeling. PhD thesis, University of Colorado at Boulder, USA.

Apu, N and Das, U (2020) Tectonics and earthquake potential of Bangladesh: A review. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 295-307. ISSN 1759-5916

Arpaci, E Y G; Akbulut, D E and Yildiz, O (2024) Enhancing water resistance of earthen buildings by using admixture materials. Architectural Engineering and Design Management, 20(2), pp. 320-336. ISSN 1745-2007

Ashraf, H and Rowlinson, S (2015) The importance of context in conflict management: Explicating the notion of conflict management climate and agenda setting for future research. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Bai, S; Li, M; Lu, Q; Tian, H and Qin, L (2022) Global time optimization method for dredging construction cycles of trailing suction hopper dredger based on grey system model. Journal of Construction Engineering and Management, 148(2): 04021198, ISSN 0733-9364

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Barkokebas, B; Khalife, S; Al-Hussein, M and Hamzeh, F (2021) A BIM-lean framework for digitalisation of premanufacturing phases in offsite construction. Engineering, Construction and Architectural Management, 28(8), pp. 2155-2175. ISSN 0969-9988

Basyouni, Y. A.; Shokry, H.; Murata, R. and Mahmoud, H. (2026) Novel development of affordable composite eco-cool roof tiles from waste materials: An experimental study. Architectural Engineering and Design Management, 22(3), pp. 900-925. ISSN 1745-2007

Batista, L T; Franco, J R Q; Fakury, R H; Porto, M F; Alves, L V R and Kohlmann, G S (2024) BIM-IoT-FM integration: strategy for implementation of sustainable water management in buildings. Smart and Sustainable Built Environment, 13(5), pp. 1096-1116. ISSN 2046-6099

Bojic, M; Yik, F and Lee, M (2003) Influence of air-conditioning exhaust on exterior recessed space. Building Research & Information, 31(1), pp. 24-33. ISSN 0961-3218

Borba, Maria Lucia Guilherme (2014) Technical-scientific and sociopolitical aspects of urban water management: Stormwater drainage in the city of São Paulo. PhD thesis, Universidade de São Paulo, Brazil.

Boser, R A and El-Gafy, M (2011) Accelerating waste minimization in residential construction: A source separation case study. International Journal of Construction Education and Research, 7(1), pp. 58-70. ISSN 1557-8771

Bowen, R M (1978) Valuation of capitalized interest on construction expenditures in the electric utility industry. PhD thesis, Stanford University, USA.

Boyd, D and Taft, A (2016) Identifying the complex information requirements of sustainable drainage systems. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Bradley, A; Li, H; Qin, H; Xi, W; Peel, D and Nisbet, N (2022) Requirements and process analysis for ports and waterways openbim ISO standards development. Construction Innovation, 22(4), pp. 705-726. ISSN 1471-4175

Brizendine, A L (1997) Risk based analysis of levees. PhD thesis, West Virginia University, USA.

Bugg, R; Collins, W and Gilbert, C (2018) Applying radio frequency identification tags to improve personnel safety in dredging construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Buzzelli, M D (2001) The Canadian urban housebuilding industry: Firm size structure and production methods in Ontario, 1945–2000. PhD thesis, McMaster University, Canada.

Bygballe, L E; Håkansson, H and Jahre, M (2013) A critical discussion of models for conceptualizing the economic logic of construction. Construction Management and Economics, 31(2), pp. 104-118. ISSN 1466433X

Campbell, A J (2012) The politics of canal construction: the Ashby Canal, 1781-1804. PhD thesis, University of Leicester, UK.

Carbonara, N and Pellegrino, R (2020) The role of public private partnerships in fostering innovation. Construction Management and Economics, 38(2), pp. 140-156. ISSN 01446193

Carrillo, P M; Robinson, H S; Anumba, C J and Bouchlaghem, N M (2006) A knowledge transfer framework: The PFI context. Construction Management and Economics, 24(10), pp. 1045-1056. ISSN 1466433X

Carroll, Steven Paige (2005) Risk-based approach to on-site wastewater treatment system siting design and management. PhD thesis, Queensland University of Technology, Australia.

Chabbi, R; Ferhoune, N and Bouabdallah, F (2023) Diagnostic of degraded reinforced concrete bridges explaining the environmental condition effect and reinforcement method. International Journal of Building Pathology and Adaptation, 41(4), pp. 825-848. ISSN 23984708

Chadalawada, J (2017) Data driven modelling and knowledge discovery in water resources engineering. PhD thesis, National University of Singapore, Singapore.

Chan, K H (2010) Critica factors in adopting cooling media for central air-conditioning systems in Hong Kong. Architectural Engineering and Design Management, 6(1), pp. 31-47. ISSN 1745-2007

Cheah, C; Kang, J and Chew, D (2007) Strategic analysis of large local construction firms in China. Construction Management and Economics, 25(1), pp. 25-38. ISSN 1466433X

Chen, X; Chang-Richards, A Y; Ling, F Y Y; Yiu, T W; Pelosi, A and Yang, N (2025) Digital technology-enabled AEC project management: practical use cases, deployment patterns and emerging trends. Engineering, Construction and Architectural Management, 32(6), pp. 4125-4154. ISSN 0969-9988

Chiadighikaobi, P C and Ubani-Wokoma, B C (2025) Suitability of basalt textile-reinforced granite–periwinkle shell concrete for sustainable construction in Nigeria. Construction Economics and Building, 25(1), pp. 171-202. ISSN 2204-9029

Chmielewski, H T (2023) Overcoming modeling barriers in long-term interdependent infrastructure systems planning. PhD thesis, North Carolina State University, USA.

Cho, M; Bugg, R; Sattineni, A and Redden, L (2021) Wood waste minimization practices in residential construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Chou, J. S.; Yeh, P. C.; Liu, C. Y. and Chen, K. J. (2026) Improving detection of pollution fee declarations for environmental policy compliance through metaheuristic-optimized ensemble learning. Engineering, Construction and Architectural Management, 33(7), pp. 5820-5848. ISSN 0969-9988

Chowdhury, R (2009) Life cycle based analysis of various materials used in road construction. PhD thesis, University of Toledo, USA.

Chung, K H Y (2022) Data fusion, hedonic pricing, and blockchains: Lowering investment barriers for sustainable infrastructure. PhD thesis, University of Michigan, USA.

Cochran, K M (2006) Construction and demolition debris recycling: Methods, markets, and policy. PhD thesis, University of Florida, USA.

Coelho Maran, A C (2010) Multicriteria decision support system to delineate water resources planning and management regions. PhD thesis, Colorado State University, USA.

Cordoba, Rodrigo Eduardo (2014) Study of the influence of leachates from civil construction waste landfills on water resource quality. PhD thesis, Universidade de São Paulo, Brazil.

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Danso, H; Martinson, B; Ali, M and Mant, C (2015) Performance characteristics of enhanced soil blocks: A quantitative review. Building Research & Information, 43(2), pp. 253-262. ISSN 0961-3218

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

Deilmann, C; Effenberger, K H and Banse, J (2009) Housing stock shrinkage: Vacancy and demolition trends in Germany. Building Research & Information, 37(5-6), pp. 660-668. ISSN 0961-3218

Delwar, M (1998) A generic LCCA algorithm for pavement management decisions. PhD thesis, Washington State University, USA.

Dick, B M (2019) Diagnostic testing in the natural and built environment. PhD thesis, North Carolina State University, USA.

Ding, G and Forsythe, P J (2013) Sustainable construction: Life cycle energy analysis of construction on sloping sites for residential buildings. Construction Management and Economics, 31(3), pp. 254-265. ISSN 1466433X

Doe, Robert (2017) Integration of computational design tools in the design and production of prefabricated homes. PhD thesis, University of Sydney, Australia.

Dong, F (2010) Essays in advanced risk management and quantitative strategies in infrastructure finance. PhD thesis, Columbia University, USA.

Dossick, C; Osburn, L and Neff, G (2025) Innovation through practice: The messy work of making technology useful for architecture, engineering and construction teams. Engineering, Construction and Architectural Management, 32(7), pp. 4887-4899. ISSN 0969-9988

Dsouza, M; Phadtare, A; Vyas, S S; Shinde, Y and Jadhav, A (2024) Toward resilient development in rural area: some strategic recommendations based on contextual findings in Bhokardan Taluka, Jalna. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 699-727. ISSN 1759-5916

Eghbali-Zarch, M; Tavakkoli-Moghaddam, R; Dehghan-Sanej, K and Kaboli, A (2022) Prioritizing the effective strategies for construction and demolition waste management using fuzzy idocriw and waspas methods. Engineering, Construction and Architectural Management, 29(3), pp. 1109-1138. ISSN 0969-9988

El-Kelesh, A M and Hassan, D A (2023) Impact of ground conditions and excavation depth on selection of excavation support system. International Journal of Construction Management, 23(15), pp. 2539-2550. ISSN 1562-3599

Elmousalami, H H; Ali, A H; Kineber, A F and Elyamany, A (2024) A novel conceptual cost estimation decision-making model for field canal improvement projects. International Journal of Construction Management, 24(6), pp. 651-663. ISSN 1562-3599

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Faria, Bruna Fernanda de (2012) The influence of the solid waste disposal areas in campinas city, São Paulo state (Brazil) on water quality. PhD thesis, Universidade Estadual de Campinas, Brazil.

Farouk, A M; Rahman, R A and Romali, N S (2023) Economic analysis of rehabilitation approaches for water distribution networks: Comparative study between Egypt and Malaysia. Journal of Engineering, Design and Technology, 21(1), pp. 130-149. ISSN 1726-0531

Farrell, M L (1996) Real property valuation in a context of Knight-Keynes uncertainty. Journal of Financial Management of Property and Construction, 1(1), pp. 5-20. ISSN 1366-4387

Farzin, A; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Faubel, C.; Mowen, D.; Miri, M.; Demarquet Alban, U.; Martinez-Molina, A. and Alamaniotis, M. (2026) Multimodal transformer models for real-time estimation of indoor environmental quality in educational settings. Smart and Sustainable Built Environment, pp. 1-37. ISSN 2046-6099

Fini, A A F and Forsythe, P (2020) Barriers to reusing and recycling office fit-out: An exploratory analysis of demolition processes and product features. Construction Economics and Building, 20(4), pp. 42-62. ISSN 2204-9029

Fisher, A D and Robitaille, A M (2011) Replacement of the movable span of the Thames River Bridge: How 19th century technology impacted 21st century construction. Journal of Construction Engineering and Management, 137, pp. 895-900. ISSN 0733-9364

Fisher, D J; O'Neill, M W and Contreras, J C (1995) DS^2: Drilled shaft decision support system. Journal of Construction Engineering and Management, 121(1), pp. 86-94. ISSN 0733-9364

Flint, M M (2014) A modular framework for performance-based durability engineering. PhD thesis, Stanford University, USA.

Frimpong, Y and Oluwoye, J (2003) Significant factors causing delay and cost overruns in construction of groundwater projects in Ghana. Journal of Construction Research, 4(2), pp. 175-187. ISSN 1609-9451

Gade, R (2022) Achieving sustainable construction through construction & demolition waste minimisation in residential building projects. PhD thesis, Auckland University of Technology, New Zealand.

Gangrade, R (2021) Quantifying spatial geotechnical uncertainty to advance the practice of risk assessment and decision-making for tunnel projects. PhD thesis, Colorado School of Mines, USA.

Gavilan, R M and Bernold, L E (1994) Source evaluation of solid waste in building construction. Journal of Construction Engineering and Management, 120(3), pp. 536-552. ISSN 0733-9364

Gbadegesin, A O; Sun, Y and Nwulu, N I (2021) Stacked value streams of hybrid energy storage systems in prosumer microgrids. Journal of Engineering, Design and Technology, 19(5), pp. 1063-1079. ISSN 1726-0531

Genc, O (2021) Symbioconstruction: A bibliography-driven dynamic construction industry symbiosis database. Journal of Construction Engineering and Management, 147(8): 04021077, ISSN 0733-9364

Ghosh, A (2017) Briefing: Recent developments in construction and engineering insurance law. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(1), pp. 3-5. ISSN 1751-4304

Glick, S; Leed, A P; Guggemos, A A and Price, J (2011) Increasing resource efficiency through residential greywater use. International Journal of Construction Education and Research, 7(1), pp. 41-57. ISSN 1557-8771

Godby, C J (2002) A computational study of lexicalized noun phrases in English. PhD thesis, Ohio State University, USA.

Gonzalez-Quevedo, A A; Abourizk, S M; Iseley, D T and Halpin, D W (1993) Comparison of two simulation methodologies in construction. Journal of Construction Engineering and Management, 119(3), pp. 573-589. ISSN 0733-9364

Gorod, A; Hallo, L; Statsenko, L; Nguyen, T and Chileshe, N (2021) Integrating hierarchical and network centric management approaches in construction megaprojects using a holonic methodology. Engineering, Construction and Architectural Management, 28(3), pp. 627-661. ISSN 0969-9988

Grimm, Alec G (2023) Modeling and monitoring construction site sediment control measures to improve design, performance, and longevity. PhD thesis, Ohio State University, USA.

Gruneberg, S L; Hughes, W P and Ancell, D J (2007) Risk under performance-based contracting in the UK construction sector. Construction Management and Economics, 25(7), pp. 691-699. ISSN 1466433X

Guo, Q L (2001) Development of risk analysis models for decision-making in project management. PhD thesis, Edinburgh Napier University, UK.

Gurieva, V; Ilyina, A; Klyuev, S; Saidumov, M; Khezhev, T; Nedoseko, I; Fediuk, R; Shamanov, V and Yazyev, B (2025) Production of ceramic bricks using nickel slags as contribution to decarbonization. International Journal of Building Pathology and Adaptation, 43(4), pp. 652-664. ISSN 2398-4708

Guven, H and Tanik, A (2020) Water-energy nexus: Sustainable water management and energy recovery from wastewater in eco-cities. Smart and Sustainable Built Environment, 9(1), pp. 54-70. ISSN 2046-6099

H M, C S (2018) Impact of construction practices on sustainable environment: a study at Bangalore. PhD thesis, Shri Jagdishprasad Jhabarmal Tibarewala University, India.

Haddad, A N; Silva, A B; Hammad, A W A; Najjar, M K; Vazquez, E G and Tam, V W Y (2023) An integrated approach of building information modelling and life cycle assessment (BIM-LCA) for gas and solar water heating systems. International Journal of Construction Management, 23(14), pp. 2452-2468. ISSN 1562-3599

Harty, J (2012) The impact of digitalisation on the management role of architectural technology. PhD thesis, Robert Gordon University, UK.

Hasan, S and Sacks, R (2023) Integrating BIM and multiple construction monitoring technologies for acquisition of project status information. Journal of Construction Engineering and Management, 149(7): 04023051, ISSN 0733-9364

He, Hailong (2017) Exploring the combined impact of project portfolio construction and steering on project portfolio performance. PhD thesis, University of Gloucestershire, UK.

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

Hejducki, Z and Mrozowicz, J (2001) Stream methods of construction work organization: An introduction to the problem. Engineering, Construction and Architectural Management, 8(2), pp. 80-89. ISSN 0969-9988

Hinze, J and Brown, J (1994) Properties of soundless chemical demolition agents. Journal of Construction Engineering and Management, 120(4), pp. 816-827. ISSN 0733-9364

Hinze, J and Nelson, A (1996) Enhancing performance of soundless chemical demolition agents. Journal of Construction Engineering and Management, 122(2), pp. 193-195. ISSN 0733-9364

Hofstetter, M (2024) Community, markets, and conviviality : A political ecology of rural water supply. PhD thesis, Wageningen University and Research, Netherlands.

Hogan, J M (1983) The "great debate" over Panama: An analysis of controversy over the Carter-Torrijos Treaties of 1977. PhD thesis, University of Wisconsin - Madison, USA.

Huynh, N M; Le-Hoai, L; Chuong Nguyen, V H and Tran, C (2025) An assessment framework for underground construction methods in the pre-construction stage: a technical perspective. International Journal of Construction Management, 25(3), pp. 265-277. ISSN 1562-3599

Hyde, R A (1999) Educating engineers for environmentally sensitive practice. PhD thesis, University of Toronto, Canada.

Hällström, A A F (2023) Collaborative project delivery models in infrastructure construction. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Inti, S (2016) A decision making approach for selection of sustainable pavements in Texas by integrating life cycle cost analysis (LCCA), life cycle assessment (LCA) of environmental and social impacts. PhD thesis, University of Texas at El Paso, USA.

Inácio, M F M (1999) The building deconstruction process and the debris trail: towards a dynamic model. PhD thesis, University of Salford, UK.

Ioannou, P G and Martinez, J C (1996) Comparison of construction alternatives using matched simulation experiments. Journal of Construction Engineering and Management, 122(3), pp. 231-241. ISSN 0733-9364

Iyer, K C and Sagheer, M (2011) A real options based traffic risk mitigation model for build-operate-transfer highway projects in India. Construction Management and Economics, 29(8), pp. 771-779. ISSN 1466433X

Jacobsson, M and Roth, P (2014) Towards a shift in mindset: Partnering projects as engagement platforms. Construction Management and Economics, 32(5), pp. 419-432. ISSN 01446193

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Javed, S; Ørnes, I R; Myrup, M and Dokka, T H (2019) Design optimization of the borehole system for a plus-energy kindergarten in Oslo, Norway. Architectural Engineering and Design Management, 15(3), pp. 181-195. ISSN 1745-2007

Jenkins, K (2023) The COVID-19 implications on the United States failing infrastructure and its affect on future generations. PhD thesis, Capitol Technology University, USA.

Jensen, D A (2010) A longitudinal study of a Type I differing conditions claim: Investigating the contractor's failure to meet the reasonable prudent standard. Construction Management and Economics, 28(1), pp. 63-74. ISSN 1466433X

Ji, Guohua (2007) Building under the planned economy: A history of China's architecture and construction 1949-1965. DBA thesis, ETH Zürich, Switzerland.

Jin, H; Liu, S; Liu, C and Udawatta, N (2019) Optimizing the concession period of PPP projects for fair allocation of financial risk. Engineering, Construction and Architectural Management, 26(10), pp. 2347-2363. ISSN 0969-9988

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Jordan, M R C (2005) The design, use and implementation of maintenance management systems and pavement management systems for whole life costing. Unpublished PhD thesis, Curtin University of Technology, Australia.

Joy Vasantha Rani, S P and Aruna Prabha, K (2010) Stochastic logic computation based rbfnn with adaptive hidden layer structure. Journal of Engineering, Design and Technology, 8(2), pp. 206-220. ISSN 1726-0531

Kader, A S A (1997) Cost modelling for inland waterway transport systems. PhD thesis, Liverpool John Moores University, UK.

Kahaduwa, A and Rajapakse, L (2022) Review of climate change impacts on reservoir hydrology and long-term basin-wide water resources management. Building Research & Information, 50(5), pp. 515-526. ISSN 0961-3218

Kalainesan, S (2007) Best management practices for highway construction site sedimentation basins. PhD thesis, University of Pittsburgh, USA.

Kalu, I E and Ogbonna, N J (2021) Investigation of environmental effect of stone quarrying activities on soil and water in Akpoha and Ishiagu communities of Ebonyi State, Nigeria. International Journal of Construction Management, 21(12), pp. 1185-1199. ISSN 1562-3599

Kaminsky, J A (2022) Improving public-private partnerships for renewable electricity infrastructure in lower- and middle-income countries. Journal of Construction Engineering and Management, 148(5): 04022012, ISSN 0733-9364

Kang, J; Cheah, C Y J and Chew, D A S (2005) Strategic analysis of large chinese construction enterprises. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Kapambwe, F C (2003) An evaluation of the implications of equity foreign direct investment risks in BOT infrastructure projects for overseas contractors in sub-Saharan Africa. PhD thesis, University of Reading, UK.

Karki, T K (2020) Flood resilience in Malaysian cities: A case study of two towns in Johor state. International Journal of Disaster Resilience in the Built Environment, 11(3), pp. 329-342. ISSN 1759-5916

Karunaratne, Banneka Mudiyanselage (1994) A new method of analysis for cyclic construction operations using systems engineering approach. PhD thesis, University of New South Wales, Australia.

Karunasena, G; Gajanayake, A; Wijeratne, W M P U; Milne, N; Udawatta, N; Perera, S; Crimston, A and Aliviano, P (2024) Liquid waste management in the construction sector: A systematic literature review. International Journal of Construction Management, 24(1), pp. 86-96. ISSN 1562-3599

Kazemi, Hamidreza (2014) Evaluating the effectiveness and hydrological performance of green infrastructure stormwater control measures. PhD thesis, University of Louisville, USA.

Kelly, C L (2019) Development of a site selection tool based in life cycle assessment (LCA), for tidal power schemes. PhD thesis, Liverpool John Moores University, UK.

Kerns, W R (1971) Criteria for determining economic priorities in awarding sewage facility construction grants. PhD thesis, Pennsylvania State University, USA.

Kerr, N J (2018) The rationale for retrofit: A multi-level, interdisciplinary perspective on the energy efficient retrofit of existing residential buildings. PhD thesis, University of Leeds, UK.

Khan, N A; Ullah Khan, S; Ahmed, S; Farooqi, I H; Hussain, A; Vambol, S and Vambol, V (2020) Smart ways of hospital wastewater management, regulatory standards and conventional treatment techniques: A short review. Smart and Sustainable Built Environment, 9(4), pp. 727-736. ISSN 2046-6099

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Kim, J H (2003) An approach to facilitate knowledge streams of occasional individual building industry clients at the pre-project stage. PhD thesis, University of Reading, UK.

Kishk, M and Oladunjoye, B (2009) Risk assessment and allocation in Nigerian oil and gas projects. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Klarin, A and Xiao, Q (2024) Automation in architecture, engineering and construction: A scientometric analysis and implications for management. Engineering, Construction and Architectural Management, 31(8), pp. 3308-3334. ISSN 0969-9988

Koc, K and Okudan, O (2021) Assessment of life cycle risks of deconstruction in urban regeneration projects. Journal of Construction Engineering and Management, 147(10): 04021137, ISSN 0733-9364

Koch, C (2004) Operations management on the construction site: Developing a human resource and knowledge oriented alternative to lean construction. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Koch, C and Larsen, C S (2006) Quality in construction: A supply chain perspective. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Koem, C and Tantanee, S (2021) Flash flood hazard mapping based on AHP with GIS and satellite information in Kampong Speu province, Cambodia. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 457-470. ISSN 1759-5916

Kong, Z; Ma, H; Lv, K and Shi, J J (2023) Liability of foreignness in public-private partnership projects. Journal of Construction Engineering and Management, 149(9): 04023085, ISSN 0733-9364

Kumaraswamy, M M; Ling, F Y Y; Anvuur, A M and Rahman, M M (2007) Targeting relationally integrated teams for sustainable PPPs. Engineering, Construction and Architectural Management, 14(6), pp. 581-596. ISSN 0969-9988

Kähkönen, K and Rannisto, J (2015) Understanding fundamental and practical ingredients of construction project data management. Construction Innovation, 15(1), pp. 7-23. ISSN 1471-4175

Languell, J L (2001) Development of a prototype assessment tool to evaluate the potential to successfully implement deconstruction as a regional waste reduction strategy. PhD thesis, University of Florida, USA.

Lee, W (2018) Use of wearable sensors to unveil roles of task demands-personal resources and burnout on performance of construction workers. PhD thesis, University of Washington, USA.

Li, K Y K and Chan, A T (2004) Management of radon in tunnel drilling. Journal of Construction Engineering and Management, 130(5), pp. 699-707. ISSN 0733-9364

Li, Y (2013) Developing a sustainable construction waste estimation and management system. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Lim, T K; Park, S M; Lee, H C and Lee, D E (2016) Artificial neural network-based slip-trip classifier using smart sensor for construction workplace. Journal of Construction Engineering and Management, 142(2): 04015065, ISSN 0733-9364

Lingard, H; Gilbert, G and Graham, P (2001) Improving solid waste reduction and recycling performance using goal setting and feedback. Construction Management and Economics, 19(8), pp. 809-817. ISSN 01446193

Lingard, H and Wakefield, R (2013) A voluntary approach to designing for safer construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(5), pp. 249-259. ISSN 17514312

Liu, K and Golparvar-Fard, M (2015) Crowdsourcing construction activity analysis from jobsite video streams. Journal of Construction Engineering and Management, 141(11): 04015035, ISSN 0733-9364

Liu, M; Han, S and Lee, S (2016) Tracking-based 3D human skeleton extraction from stereo video camera toward an on-site safety and ergonomic analysis. Construction Innovation, 16(3), pp. 348-367. ISSN 1471-4175

Liu, S; Jin, H; Liu, C; Xie, B and Mills, A (2022) Development and testing of a rent determination framework for PPP rental villages. International Journal of Construction Management, 22(2), pp. 192-204. ISSN 1562-3599

Locicero, Ryan Charles Robert (2015) Mainstreaming green infrastructure: The nexus of infrastructure and education using the green space based learning (gsbl) approach for bioretention plant selection. PhD thesis, University of South Florida, USA.

Loo, S C; Wang, C; Yap, J B H; Abdul-Rahman, H and Wood, L C (2020) Globalisation entry decision-supporting tool for international construction risks. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(4), pp. 151-166. ISSN 17514304

Lucke, T and Beecham, S (2011) Field investigation of clogging in a permeable pavement system. Building Research & Information, 39(6), pp. 603-615. ISSN 0961-3218

Lueke, J S and Ariaratnam, S T (2005) Surface heave mechanisms in horizontal directional drilling. Journal of Construction Engineering and Management, 131(5), pp. 540-547. ISSN 0733-9364

Luise Valencia Gluyas, J (2004) Public-private participation in water infrastructure in Mexico. PhD thesis, University of Leeds, UK.

Löwstedt, M and Räisänen, C (2018) Ceos narrating leadership: Constant gardeners, team players, actionable pragmatists and business directors. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Ma, J (2016) A data driven study on LEED credits and green building related implications in city planning. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Ma, Z; Gu, J; Zhao, Q; Yang, M; Qian, C; He, M and Hei, X (2025) Intelligent optimization of blasting parameters in railroad tunnels based on blasting quality control. Journal of Construction Engineering and Management, 151(8): 04025094, ISSN 0733-9364

Magill, L J; Jafarifar, N; Watson, A and Omotayo, T (2022) 4D BIM integrated construction supply chain logistics to optimise on-site production. International Journal of Construction Management, 22(12), pp. 2325-2334. ISSN 1562-3599

Mahmoudi, E; Stepien, M and König, M (2021) Optimisation of geotechnical surveys using a BIM-based geostatistical analysis. Smart and Sustainable Built Environment, 10(3), pp. 420-437. ISSN 2046-6099

Mamphweli, N S and Meyer, E L (2011) Development of a cyclone with internal electric field. Journal of Engineering, Design and Technology, 9(3), pp. 313-322. ISSN 1726-0531

Manzoni, B; Morris, P and Smyth, H (2010) Managing architectural competitions: Empirical evidence from practices in the UK and Italy. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Maytorena Sanchez, Eunice S (2003) Building conversion process: a cognitive exploration. PhD thesis, University College London, UK.

Merdinger, C J (1949) A history of civil engineering. PhD thesis, University of Oxford, UK.

Mesa Jiménez, J J (2021) Artificial intelligence for optimisation and demand side response in built environment. PhD thesis, Brunel University, UK.

Miller, L; Mannering, F and Abraham, D M (2009) Effectiveness of speed control measures on nighttime construction and maintenance projects. Journal of Construction Engineering and Management, 135(7), pp. 614-619. ISSN 0733-9364

Miocevic, D; Maricic, M; Arslanagic-Kalajdzic, M and Dedic, G (2025) Emotional intelligence and relational energy in cooperative arrangements in construction projects: Complements or substitutes? Construction Management and Economics, 43(8), pp. 583-598. ISSN 0144-6193

Mishra, S K; Upadhyay, B and Das, B B (2026) Exploring the role of metakaolin in binary and ternary blended 3D printable mortars: Deep insights into printability. International Journal of Construction Management, 26(2), pp. 185-203. ISSN 1562-3599

Mitikie, B B and Lee, T S (2019) Experimental investigation of enzyme stabilization and its effect on clay brick. Journal of Construction Engineering and Management, 145(4): 04019012, ISSN 0733-9364

Modin, J (1995) KBS-class: A neural network tool for automatic content recognition of building texts. Construction Management and Economics, 13(5), pp. 411-416. ISSN 01446193

Moon, S; Xu, S; Hou, L; Wu, C; Wang, X and Tam, V W Y (2018) RFID-aided tracking system to improve work efficiency of scaffold supplier: Stock management in Australasian supply chain. Journal of Construction Engineering and Management, 144(2): 04017115, ISSN 0733-9364

Moore, D R; Paterson, G and Martinez, R S (2004) Sustainable communities: A proposal linking the management of forestation and agricultural waste with the development of recyclable housing. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Morgan, J (2009) Housing and security in England and Wales: Casualisation revisited. International Journal of Law in the Built Environment, 1(1), pp. 42-58. ISSN 1756-1450

Morledge, R and Owen, K (1998) Critical success factors in PFI projects. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Morris, Austin J (2022) Project management maturity and project success in NSW local government. PhD thesis, University of Technology Sydney, Australia.

Muhammad, A; Usman, N and Gambo, N (2022) Effect of binary blended pozzolanic materials on properties of self-compacting concrete. International Journal of Construction Management, 22(7), pp. 1323-1332. ISSN 1562-3599

Muir Jr., R W (2015) Application of lean construction principles to highway projects: Analysis of barriers to timely delivery of service. PhD thesis, Drexel University, USA.

Nandeppanavar, M M; Kemparaju M C and Raveendra N (2023) Effect of non-linear thermal radiation on the stagnation point flow of double diffusive free convection due to movingvertical plate. Journal of Engineering, Design and Technology, 21(1), pp. 150-166. ISSN 1726-0531

Newaz, M T; Davis, P; Sher, W and Simon, L (2022) Factors affecting construction waste management streams in Australia. International Journal of Construction Management, 22(13), pp. 2625-2633. ISSN 1562-3599

Ngozwana, M N (2018) Career aspirations of construction TVET learners in South Africa. PhD thesis, University of Pretoria, South Africa.

Nicolini, D (2002) In search of 'project chemistry'. Construction Management and Economics, 20(2), pp. 167-177. ISSN 01446193

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Nilsson, S (2003) Durability of district heating pipes. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Nipun, M W H; Ashik-Ur-Rahman, M; Rikta, S Y; Parven, A and Pal, I (2024) Rooftop rainwater harvesting for sustainable water usage in residential buildings for climate resilient city building: Case study of Rajshahi, Bangladesh. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 80-100. ISSN 1759-5916

Niss, J F (1965) Custom production, theory and practice: With special emphasis on the goals and pricing procedures of the contract construction industry. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Nizam Shaikh, R (2019) BIM-based investigation of total energy consumption in delivering buildings as a product. PhD thesis, University of Liverpool, UK.

Norton, M and Lane, A (2012) 'New water architecture': An integrated water management model. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(3), pp. 159-171. ISSN 17514312

Nwadigo, O (2019) Real-time and dynamic planning and scheduling under disruption using multi-hybrid simulation and optimisation. PhD thesis, Auckland University of Technology, New Zealand.

Obonyo, E A (2004) Apron: Agent-based specification and procurement of construction products. EngD thesis, Loughborough University, UK.

Ofori-Boadu, A N; Abrokwah, R Y; Gbewonyo, S and Fini, E (2018) Effect of swine-waste bio-char on the water absorption characteristics of cement pastes. International Journal of Building Pathology and Adaptation, 36(3), pp. 283-299. ISSN 23984708

Ofori-Boadu, A N; Bryant, D; Bock-Hyeng, C; Assefa, Z; Aryeetey, F; Munkaila, S and Fini, E (2022) Physiochemical characterization of agricultural waste biochars for partial cement replacement. International Journal of Building Pathology and Adaptation, 40(4), pp. 569-586. ISSN 23984708

Ofosu, K (2010) An integrated approach to transportation infrastructure management. PhD thesis, Florida State University, USA.

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology, 18(5), pp. 1287-1303. ISSN 1726-0531

Okeyinka, O M (2016) The applicability of recycled waste paper as lightweight building materials. PhD thesis, University of Wolverhampton, UK.

Oloufa, A A; Eltahan, A A and Papacostas, C S (1994) Integrated GIS for construction site investigation. Journal of Construction Engineering and Management, 120(1), pp. 211-222. ISSN 0733-9364

Omar, I and Makhlomo, S (2003) Energy alternatives for water pumping in rural areas: Using a case study approach. Journal of Engineering, Design and Technology, 1(1), pp. 1-14. ISSN 1726-0531

Osman, K K; Claveria, J B; Faust, K M and Hernandez, S (2019) Temporal dynamics of willingness to pay for alternatives that increase the reliability of water and wastewater service. Journal of Construction Engineering and Management, 145(7): 04019041, ISSN 0733-9364

Ottaviani, F M; De Marco, A; Narbaev, T and Ballesteros-Pérez, P (2026) Work rate-based indicators for improving project performance regression models. International Journal of Construction Management, 26(1), pp. 99-112. ISSN 1562-3599

O’connor, J T and Caraway, P H (1993) Need for specification format that accommodates engineered projects. Journal of Construction Engineering and Management, 119(4), pp. 757-768. ISSN 0733-9364

Palencia, M; Mora, M and Lerma, T A (2021) Environment-friendly stimulus-sensitive polyurethanes based on cationic aminoglycosides for the controlled release of phytohormones. Smart and Sustainable Built Environment, 10(1), pp. 1-17. ISSN 2046-6099

Pantzartzis, E; Price, A and Edum Fotwe, F (2019) Roadmap layers and processes: Resilient and sustainable care facilities. Engineering, Construction and Architectural Management, 26(9), pp. 1986-2007. ISSN 0969-9988

Peace, S L (1999) Partnering in the UK building industry. PhD thesis, University of Reading, UK.

Perera, H P; Perera, B A K S and Palihakkara, A D (2023) Financial and economic risk management in coastal land reclamation projects. Construction Innovation, 23(4), pp. 878-897. ISSN 1471-4175

Pons, O; Casanovas-Rubio, M M; Armengou, J and De La Fuente, A (2021) Sustainability-driven decision-making model: Case study of fiber-reinforced concrete foundation piles. Journal of Construction Engineering and Management, 147(10): 04021116, ISSN 0733-9364

Praveen, D and Kunnampalli, J (2024) Evaluating the impacts of anticipated sea level rise, climate change and land use land cover scenarios on the rice crop in Alappuzha, Kerala and strategies to build climate responsive agriculture. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 755-775. ISSN 1759-5916

Pritchard, C R (1999) Access to construction work and resources in Zimbabwe: An institutional analysis of the development of the construction industry. PhD thesis, London South Bank University, UK.

Puddicombe, M S and Johnson, B (2011) Research and theory building in construction management. International Journal of Construction Education and Research, 7(2), pp. 126-142. ISSN 1557-8771

Pushpakumara, B H J; Gunasekara, M T and Gannile, Y M T D (2023) Variation of mechanical and chemical properties of old and new clay bricks. Journal of Construction Engineering and Management, 149(4): 04023006, ISSN 0733-9364

Qiu, Y and Chen, H (2023) A systematic review of the knowledge domain of institutional theory in construction project management. Engineering, Construction and Architectural Management, 30(6), pp. 2523-2544. ISSN 0969-9988

Quinn, J T (1991) Analysis of optimal and nearly optimal plans for multipurpose river projects. PhD thesis, Harvard University, USA.

Rafaat, R; Osman, H; Georgy, M and Elsaid, M (2020) Preferred risk allocation in egypt's water sector PPPs. International Journal of Construction Management, 20(6), pp. 585-597. ISSN 1562-3599

Raheem, A A; Falola, O O and Adeyeye, K J (2012) Production and testing of lateritic interlocking blocks. Journal of Construction in Developing Countries, 17(1), pp. 35-50. ISSN 1823-6499

Ramos, M A P (2023) Determining factors and strategies to promote construction and demolition waste management on a local scale. PhD thesis, Universidade NOVA de Lisboa, Portugal.

Ranasinghe, K A M K (1990) Analytical method for quantification of economic risks during feasibility analysis for large engineering projects. PhD thesis, University of British Columbia, Canada.

Rashid, M J; Chowdhooree, I; Aziz, T and Hossain, M (2024) Determining the climate adaptive capacity of urban actors: A case study of Mongla port-town in Bangladesh. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 617-635. ISSN 1759-5916

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Rauf, A; Shafiq, M T; Khalfan, M M A and Ulhaq, I (2024) Sustainable water management in construction: Life-cycle embodied water assessment of residential buildings. Built Environment Project and Asset Management, 14(5), pp. 682-696. ISSN 2044-124X

Renev, Ivan (2019) Automation of the conceptual design process in construction industry using ideas generation techniques. PhD thesis, Lappeenranta-Lahti University of Technology, Finland.

Rezaei, M; Mostafaeipour, A; Jafari, N; Naghdi-Khozani, N and Moftakharzadeh, A (2020) Wind and solar energy utilization for seawater desalination and hydrogen production in the coastal areas of southern Iran. Journal of Engineering, Design and Technology, 18(6), pp. 1951-1969. ISSN 1726-0531

Riaz, Z; Parn, E A; Edwards, D J; Arslan, M; Shen, C and Pena-Mora, F (2017) BIM and sensor-based data management system for construction safety monitoring. Journal of Engineering, Design and Technology, 15(6), pp. 738-753.

Robinson, J and Cole, R J (2015) Theoretical underpinnings of regenerative sustainability. Building Research & Information, 43(2), pp. 133-143. ISSN 0961-3218

Rohman, Mohammad Arif (2017) Stakeholders' perspective on achieving project social benefit from Indonesian toll roads. PhD thesis, University of Melbourne, Australia.

Rosado, Lais Peixoto (2019) Life cycle assessment of construction and demolition waste management in a Brazilian watershed. PhD thesis, Universidade Estadual de Campinas, Brazil.

Rosenbaum, S; Toledo, M and González, V (2014) Improving environmental and production performance in construction projects using value-stream mapping: Case study. Journal of Construction Engineering and Management, 140(2): 04013045, ISSN 0733-9364

Rosenfeld, Y (1994) Innovative construction methods. Construction Management and Economics, 12(6), pp. 521-541. ISSN 01446193

Rosso, S (2007) Environmental life-cycle of domestic kitchen refurbishment. PhD thesis, University of Brighton, UK.

Rowbotham, A (2018) Designing for fluid transitions to sustainable infrastructure: the case of the Bedford & Milton Keynes Waterway. PhD thesis, Open University, UK.

Russell, A D and Ranasinghe, M (1992) Analytical approach for economic risk quantification of large engineering projects. Construction Management and Economics, 10(4), pp. 277-301. ISSN 01446193

Salonen, A (2006) Relational risk and relationship management in facilities management partnerships. PhD thesis, Helsinki University of Technology, Finland.

Schexnayder, C J and David, S A (2002) Past and future of construction equipment: part iv. Journal of Construction Engineering and Management, 128(4), pp. 279-286. ISSN 0733-9364

Schmidt, J Q (2024) Overcoming barriers to adoption of smart stormwater technologies. PhD thesis, University of Michigan, USA.

Sergeeva, N and Radosavljevic, M (2012) Idea contribution in construction: In search for evidence of the interface between idea generation and its implementation. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Shahedi, F. and Abrishami, S. (2026) Adaptive construction scheduling with AI in 4D/5D BIM: Integrating weather data and activity-based costing. Smart and Sustainable Built Environment, pp. 1-15. ISSN 2046-6099

Shealy, T and Klotz, L (2015) Well-endowed rating systems: How modified defaults can lead to more sustainable performance. Journal of Construction Engineering and Management, 141(10): 04015031, ISSN 0733-9364

Sheng, Boyuan (2022) Enhancing green infrastructure management for flood-drought resilience in brisbane, Australia: An integrated approach. PhD thesis, Queensland University of Technology, Australia.

Shih, C S R; Arroyo, G A and Doro-on, A M (2004) Innovative sustainable design approaches for onsite sewage treatment. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Shojaei Kol Kachi, A (2017) Extending the portfolio and strategic planning horizon by the stochastic forecasting of unknown future projects: A FDOT case study. PhD thesis, University of Florida, USA.

Short, C A (2008) What is 'architectural design research'? Building Research & Information, 36(2), pp. 195-199. ISSN 0961-3218

Sirimewan, D C; Mendis, A; Damitha, R; Samaraweera, A and Naiduwa Handi Chathuri, M (2021) Analysis of issues in sustainable water management of irrigation systems: Case of a developing country. Built Environment Project and Asset Management, 11(4), pp. 529-543. ISSN 2044-124X

Siriwardhana, S and Moehler, R (2024) Mastering the skills of construction 4.0: A review of the literature using science mapping. Smart and Sustainable Built Environment, 13(4), pp. 989-1014. ISSN 2046-6099

Smallwood, J and Emuze, F (2012) The integration of diplomates and graduates into the construction industry: A pilot South African study. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Smith, B A V (2016) Assessment of carbon and nutrient export from a peatland windfarm construction site. PhD thesis, University of Glasgow, UK.

Snyder, J R; Dilaver, O; Stephenson, L C; Mackie, J E and Smith, S D (2018) Agent-based modelling and construction: Reconstructing antiquity's largest infrastructure project. Construction Management and Economics, 36(6), pp. 313-327. ISSN 0144-6193

Snyder, J R; Stephenson, L C; Mackie, J E and Smith, S D (2016) Agent-based modelling and the byzantine: Understanding the construction of antiquity's largest infrastructure project. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Ssengooba, F P (2010) Performance-based contracting: a case study of non-profit hospitals in Uganda. PhD thesis, University of London, UK.

Steed, A J (1996) Defining interaction within immersive virtual environments. PhD thesis, Queen Mary University of London, UK.

Stella, C; Ceppi, G and D’Appolonia, E (1990) Temporary tunnel support using jet-grouted cylinders. Journal of Construction Engineering and Management, 116(1), pp. 35-53. ISSN 0733-9364

Sugrue, D P (2021) Alternative financing for harbor infrastructure using big data analytics in the great lakes waterway. PhD thesis, University of Michigan, USA.

Sunikka-Blank, M; Galvin, R and Behar, C (2018) Harnessing social class, taste and gender for more effective policies. Building Research & Information, 46(1), pp. 114-126. ISSN 0961-3218

Tam, V W Y; Kim, K and Brohier, A (2021) Life-cycle analysis by using the alternative sustainable water innovations in residential dwellings. International Journal of Construction Management, 21(11), pp. 1143-1155. ISSN 1562-3599

Tang, G; Zhao, Z; Cao, L; Qi, Y; Yu, X and Liu, W (2023) A simulation optimization approach to optimize dredger fleet schedule plan for dredging works in existing ports. Journal of Construction Engineering and Management, 149(2): 4022165, ISSN 0733-9364

Tayebi Jebeli, M; Asadollahfardi, G and Abbasi Khalil, A (2022) Novel application of micro-nanobubble water for recycling waste foundry sand: Toward green concrete. Journal of Construction Engineering and Management, 148(9): 04022096, ISSN 0733-9364

Teixeira, Carla Fernanda Barbosa (2013) Analysis thermal performance of fiber cement tiles treated with white coatings and submitted to water spraying. PhD thesis, Universidade Estadual de Campinas, Brazil.

Teixeira Brasil, Jose Artur (2025) A digital twin framework for monitoring, modeling, and forecasting the performance of permeable pavement systems. PhD thesis, The University of Texas at San Antonio, USA.

Theodorakopoulos, T F (2017) Integrated cost management system for delivering construction projects. PhD thesis, Loughborough University, UK.

Thomas, T (1998) Domestic water supply using rainwater harvesting. Building Research & Information, 26(2), pp. 94-101. ISSN 0961-3218

Thomson, C P H (2016) From point cloud to building information model: capturing and processing survey data towards automation for high quality 3D models to aid a BIM process. PhD thesis, University College London, UK.

Thorpe, D and Zhuge, Y (2010) Advantages and disadvantages in using permeable concrete pavement as a pavement construction material. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Tolstoy, D and Axelsson, B (2018) The development of international purchasing capabilities: A comparative study of the four largest Swedish construction firms. International Journal of Construction Management, 18(2), pp. 163-176. ISSN 1562-3599

Ullah, F and Thaheem, M J (2018) Concession period of public private partnership projects: Industry-academia gap analysis. International Journal of Construction Management, 18(5), pp. 418-429. ISSN 1562-3599

Umar, M; Ofem, M I; Anwar, A S and Salisu, A G (2021) Modelling of mechanical properties of Pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), pp. 809-827. ISSN 1726-0531

Vahdatmanesh, M; Firouzi, A and Rotimi, J O B (2022) Real options analysis of revenue risk sharing in post-disaster housing reconstruction. Journal of Financial Management of Property and Construction, 27(3), pp. 281-305. ISSN 1366-4387

Van Bohemen, H D (2004) Ecological engineering and civil engineering works. PhD thesis, Delft University of Technology, Netherlands.

Vecino, G A (2016) The feasibility of using web-based technology for the management of dredging projects. PhD thesis, University of Maryland, College Park, USA.

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Wahalathantri, B; Lokuge, W; Karunasena, W and Setunge, S (2018) Quantitative assessment of flood discharges and floodway failures through cross-cultivation of advancement in knowledge and traditional practices. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 435-456. ISSN 1759-5916

Wang, X (2024) Context-aware worker intent interpretation for human-robot collaboration in construction. PhD thesis, University of Wisconsin - Madison, USA.

Watson, S (2004) Improving the implementation of environmental strategies in the design of buildings: Towards a life-cycle based, front loaded, framework for building environmental assessment during design. PhD thesis, University of Queensland, Australia.

Whaley, A (2016) Why claims fail: An autoethnographic investigation of claims management under gcc construction contracts. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Williams, N M (2021) An investigation of client loyalty in the construction professional services sector. PhD thesis, University of Wolverhampton, UK.

Wing, C K (1997) The ranking of construction management journals. Construction Management and Economics, 15(4), pp. 387-398. ISSN 01446193

Wise III, J B (1999) Multiple commitment in a multi-employer work environment. DBA thesis, Nova Southeastern University, USA.

Wu, Huanyu (2020) Impacts of cross-regional mobility of construction and demolition waste in Australia. PhD thesis, University of Adelaide, Australia.

Wu, Z (2024) Optimized structural health monitoring for inland waterways infrastructure using model-based diagnostics and prognostics. PhD thesis, University of California, San Diego, USA.

Wurthmann, K A (2023) Designing photovoltaic arrays for groundwater pumping for remote agriculture using synthetically generated daily rainfall and irrigation needs. Journal of Engineering, Design and Technology, 21(6), pp. 1803-1826. ISSN 1726-0531

Yang, X; Wang, S; Jiang, Y; Wang, L; Li, P and Wang, S (2025) Theoretical and experimental analysis of stress variations in precast concrete segment linings during double-shield TBM excavation of subway tunnels. Journal of Construction Engineering and Management, 151(6): 04025040, ISSN 0733-9364

Yang, Z (2004) Assessing cumulative damage in concrete and quantifying its influence on life cycle performance modeling. PhD thesis, Purdue University, USA.

Yesilbag, M (2016) The mortar of hegemony: The political economy of the construction boom in AKP's Turkey. PhD thesis, State University of New York at Binghamton, USA.

York, J G (2009) The entrepreneurial creation of public goods: Evidence from the green building and renewable energy industries. PhD thesis, University of Virginia, USA.

You, X (2010) Risk analysis in tunneling with imprecise probabilities. PhD thesis, University of Texas at Austin, USA.

Zarei, F and Nik-Bakht, M (2024) Extending CityGML with public input: social ADE. Built Environment Project and Asset Management, 14(4), pp. 547-561. ISSN 2044-124X

Zerjav, V; Hartmann, T and Javemick-Will, A (2012) Internal governance of design and engineering: The case of the multinational firm. Journal of Construction Engineering and Management, 138(1), pp. 135-143. ISSN 0733-9364

Zhang, X (2019) Application of queuing theory: A decision support model for construction companies in the implementation of 3D printing. PhD thesis, University of Florida, USA.

Zhang, X; Wang, M; Zhou, B and Wang, X (2018) Influence of factors on collapse risk of loess tunnel: A multi-index assessment model. Journal of Engineering, Design and Technology, 16(5), pp. 734-749. ISSN 1726-0531

Zhao, J (2014) Performance modeling and optimization solutions for networking systems. PhD thesis, University of Hong Kong, Hong Kong.

Zomer, T (2021) Institutional pressures and decoupling in projects: the case of BIM Level 2 and coercive isomorphism in the UK's construction sector. PhD thesis, University of Cambridge, UK.

olde Scholtenhuis, L L; Dorée, A G and Hartmann, T (2011) Challenges for construction it adoption on project level. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

von Malmborg, F; Rohdin, P and Wihlborg, E (2024) Climate declarations for buildings as a new policy instrument in Sweden: a multiple streams perspective. Building Research & Information, 52(4), pp. 479-496. ISSN 0961-3218