Items with Subject: traditional and composite building materials

Adekunle, T O (2015) Thermal performance of low-carbon prefabricated timber housing in the UK. PhD thesis, University of Kent, UK.

Afeez, A and Kumar, A (2013) Application of CAD and reverse engineering methodology for development of complex assemblies. Journal of Engineering, Design and Technology, 11(3), pp. 375-390. ISSN 1726-0531

Alabi, A G F; Ajiboye, T K and Olusegun, H D (2010) Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine. Journal of Engineering, Design and Technology, 8(1), pp. 80-93. ISSN 1726-0531

Alade, K; Oyebade, A and Nzewi, N (2018) Assessment of the use of locally available materials for building construction in Ado-Ekiti, Nigeria. Journal of Construction Business and Management, 2(2), pp. 36-41. ISSN 2521-0165

Almås, A J; Lisø, K R; Hygen, H O; Øyen, C F and Thue, J V (2011) An approach to impact assessments of buildings in a changing climate. Building Research & Information, 39(3), pp. 227-238. ISSN 0961-3218

Alves, T d C L (2005) Buffering practices in HVAC ductwork supply chains. PhD thesis, University of California, Berkeley, USA.

Alwisy, A; Bu Hamdan, S; Barkokebas, B; Bouferguene, A and Al-Hussein, M (2019) A BIM-based automation of design and drafting for manufacturing of wood panels for modular residential buildings. International Journal of Construction Management, 19(3), pp. 187-205. ISSN 1562-3599

Amankwaa, E F; Roberts, B M; Mensah, P and Gough, K V (2025) Impact of roofing materials on school temperatures in tropical Africa. Buildings & Cities, 6(1), pp. 139-157. ISSN 2632-6655

Austigard, M S and Mattsson, J (2020) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(4), pp. 529-538. ISSN 23984708

Ayeleso, A O and van Zyl, R R (2016) Photocurrents obtained from a triple planar probe sensor for in situ extreme ultraviolet (euv) radiation measurements on low earth orbiting cubesats. Journal of Engineering, Design and Technology, 14(3), pp. 641-651.

Baborska-Narozny, M; Szulgowska-Zgrzywa, M; Mokrzecka, M; Chmielewska, A; Fidorow-Kaprawy, N; Stefanowicz, E; Piechurski, K and Laska, M (2020) Climate justice: Air quality and transitions from solid fuel heating. Buildings & Cities, 1(1), pp. 120-140. ISSN 2632-6655

Backus, T A (1961) A study of construction and maintenance costs in relationship to true economy of school operation. EdD thesis, Florida State University, USA.

Bakhtiyari, S; Taghi Akbari, L and Jamali Ashtiani, M (2017) An investigation on fire hazard and smoke toxicity of epoxy FRP composites. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 230-237. ISSN 1759-5916

Balamurali, B; Anand, N; Thomas, M and Chin, C (2025) High-strength geopolymer based engineered cementitious composites (ECC) for sustainable and resilient construction. Journal of Engineering, Design and Technology, 23(5), pp. 1751-1769. ISSN 1726-0531

Balasbaneh, A T; Bin Marsono, A K and Kasra Kermanshahi, E (2018) Balancing of life cycle carbon and cost appraisal on alternative wall and roof design verification for residential building. Construction Innovation, 18(3), pp. 274-300. ISSN 1471-4175

Barbosa, Adriano Aurelio Ribeiro (2014) Implementing a sound power method for testing noise on masonry saw. PhD thesis, Universidade Estadual de Campinas, Brazil.

Beadle, K; Gibb, A; Austin, S; Fuster, A and Madden, P (2008) Adaptable futures: Sustainable aspects of adaptable buildings. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Becerra, J; Ortiz, P; Zaderenko, A P and Karapanagiotis, I (2020) Assessment of nanoparticles/nanocomposites to inhibit micro-algal fouling on limestone façades. Building Research & Information, 48(2), pp. 180-190. ISSN 0961-3218

Bell, T (2018) A detailed investigation into the engineering properties and challenges affecting the potential introduction of a UK grown dowel-laminated timber floor panel into the domestic construction market. PhD thesis, University of Strathclyde, UK.

Ben-Alon, L (2020) Natural buildings: Integrating earthen building materials and methods into mainstream construction. PhD thesis, Carnegie Mellon University, USA.

Bengtson, A M (2003) Framing technological development in a concrete context: The use of wood in the Swedish construction industry. PhD thesis, Uppsala Universitet, Sweden.

Bergsdal, H; Brattebø, H; Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for norway's dwelling stock. Building Research & Information, 35(5), pp. 557-570. ISSN 0961-3218

Bhavya Swathi, I; Suvarna Raju, L and Ramulu, P J (2020) Surface development by reinforcing nano-composites during friction stir processing: A review. Journal of Engineering, Design and Technology, 18(3), pp. 653-687. ISSN 1726-0531

Blindheim, J; Elverum, C W; Welo, T and Steinert, M (2020) Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling. Journal of Engineering, Design and Technology, 18(5), pp. 1139-1151. ISSN 1726-0531

Bowers, C T (2019) The next generation of residential construction: Adoption of green building programs, environmentally certified wood products and the transparency of environmental friendliness. PhD thesis, University of Washington, USA.

Brady, M (1991) Growing a housebuilder: Investigating a context for learning and modeling principles of transpersonal psychology. PhD thesis, Institute of Transpersonal Psychology, USA.

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Brown, M M (1995) The architecture of steel: Site planning and building type in the nineteenth-century American Bessemer steel industry. PhD thesis, University of Pittsburgh, USA.

Burnard, M D and Kutnar, A (2020) Human stress responses in office-like environments with wood furniture. Building Research & Information, 48(3), pp. 316-330. ISSN 0961-3218

Calvert, G S (2021) A multiple defect approach to bridge life cycle modelling. PhD thesis, University of Nottingham, UK.

Castillo, G; Alarcón, L F and González, V A (2015) Implementing lean production in copper mining development projects: Case study. Journal of Construction Engineering and Management, 141(1): 05014013, ISSN 0733-9364

Castriotto, Caio Magalhães (2023) Reciprocal link a new connection system for reciprocal frame structures developed by algorithmic modeling and digital fabrication. PhD thesis, Universidade Estadual de Campinas, Brazil.

Chandrasekara, C M K N K; Weerasinghe, K D N; Pathirana, S and Piyadasa, R U K (2018) Stresses over surface water sources in a human dominated environment: A case study in Hamilton canal, Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 9(2), pp. 184-197. ISSN 1759-5916

Chang, C K; Hanna, A S; Lackney, J A and Sullivan, K T (2007) Quantifying the impact of schedule compression on labor productivity for mechanical and sheet metal contractor. Journal of Construction Engineering and Management, 133(4), pp. 287-296. ISSN 0733-9364

Chang, C K and Sullivan, K T (2006) Workload ratio as an indicator of schedule acceleration and its relationship with labour efficiency. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Cho, M; Bugg, R; Sattineni, A and Redden, L (2021) Wood waste minimization practices in residential construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Choudhary, K; Gill, G; Sangwa, N R and Sarna, B (2025) Utilising copper tailings as a sustainable alternative to conventional structural filling materials: LCA analysis. Built Environment Project and Asset Management, 15(3), pp. 415-431. ISSN 2044-124X

Choudhary, K; Sangwa, N R and Sangwan, K S (2025) Comparative life cycle assessment of flooring options for sustainable buildings. Construction Innovation, 25(4), pp. 1108-1126. ISSN 1471-4175

Chowdhury, R (2009) Life cycle based analysis of various materials used in road construction. PhD thesis, University of Toledo, USA.

Cigén, S and Sardén, Y (2004) The effects of communication on timber supplier's relations with a construction company. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Cochran, K M (2006) Construction and demolition debris recycling: Methods, markets, and policy. PhD thesis, University of Florida, USA.

Cordoba, Rodrigo Eduardo (2014) Study of the influence of leachates from civil construction waste landfills on water resource quality. PhD thesis, Universidade de São Paulo, Brazil.

Crippa, J; Boeing, L C; Caparelli, A P A; da Costa, M R M M; Scheer, S; Araujo, A M F and Bem, D (2018) A BIM–LCA integration technique to embodied carbon estimation applied on wall systems in Brazil. Built Environment Project and Asset Management, 8(5), pp. 491-503. ISSN 2044-124X

De Araujo, V (2023) Timber construction as a multiple valuable sustainable alternative: Main characteristics, challenge remarks and affirmative actions. International Journal of Construction Management, 23(8), pp. 1334-1343. ISSN 1562-3599

De La Fuente, A; Casanovas-Rubio, M D M; Pons, O and Armengou, J (2019) Sustainability of column-supported RC slabs: Fiber reinforcement as an alternative. Journal of Construction Engineering and Management, 145(7): 04019042, ISSN 0733-9364

Devine-Wright, P; Wrapson, W; Henshaw, V and Guy, S (2014) Low carbon heating and older adults: Comfort, cosiness and glow. Building Research & Information, 42(3), pp. 288-299. ISSN 0961-3218

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Dick, B M (2019) Diagnostic testing in the natural and built environment. PhD thesis, North Carolina State University, USA.

Domdouzis, K (2007) Applications of wireless sensor technologies in construction. PhD thesis, Loughborough University, UK.

Donadon, Bruno Fazendeiro (2024) Analysis of the mechanical behavior of glued laminated timber beams reinforced with synthetic and natural fibers. PhD thesis, Universidade Estadual de Campinas, Brazil.

Dreicer, G K (1993) The long span. Intercultural exchange in building technology: Development and industrialization of the framed beam in Western Europe and the United States, 1820-1870. PhD thesis, Cornell University, USA.

Drèze, J (1983) On the choice of shadow prices for project evaluation. PhD thesis, Indian Statistical Institute - Kolkata, India.

Duksh, Y S; Kaushik, B K; Sarkar, S and Singh, R (2010) Performance comparison of carbon nanotube, nickel silicide nanowire and copper vlsi interconnects: Perspectives and challenges ahead. Journal of Engineering, Design and Technology, 8(3), pp. 334-353. ISSN 1726-0531

Duksh, Y S; Kaushik, B K; Sarkar, S and Singh, R (2013) Analysis of propagation delay and power with variation in driver size and number of shells in multi walled carbon nanotube interconnects. Journal of Engineering, Design and Technology, 11(1), pp. 19-33. ISSN 1726-0531

Eberhardt, L C M; Birgisdóttir, H and Birkved, M (2019) Life cycle assessment of a Danish office building designed for disassembly. Building Research & Information, 47(6), pp. 666-680. ISSN 0961-3218

Eldin, N N and Egger, S (1990) Productivity improvement tool: Camcorders. Journal of Construction Engineering and Management, 116(1), pp. 100-111. ISSN 0733-9364

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Estep, G D (2015) Perceptions of wood product supply and demand for affordable building and green construction markets. PhD thesis, West Virginia University, USA.

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Faria, Bruna Fernanda de (2012) The influence of the solid waste disposal areas in campinas city, São Paulo state (Brazil) on water quality. PhD thesis, Universidade Estadual de Campinas, Brazil.

Feng, H; Kassem, M; Greenwood, D and Doukari, O (2023) Whole building life cycle assessment at the design stage: A bim-based framework using environmental product declaration. International Journal of Building Pathology and Adaptation, 41(1), pp. 109-142. ISSN 23984708

Fernandes, D S and Joseph, G (2020) Organisational strategies for competitive advantage in the construction industry: Chinese dominance in southern Africa. Journal of Construction in Developing Countries, 25(2), pp. 1-38. ISSN 1823-6499

Fernando, S; Hansen, E; Kozak, R and Sinha, A (2018) Organizational cultural compatibility of engineered wood products manufacturers and building specifiers in the Pacific Northwest. Architectural Engineering and Design Management, 14(5), pp. 398-410. ISSN 1745-2007

Fisher, A (2014) Late modern industry: The politics, rhetoric, and design of industrialized housing in France, 1954-1981. PhD thesis, Northwestern University, USA.

Folorunso, C O (2021) Analysis of effectiveness of wooden floor finishes in some residential buildings in Lagos, Nigeria. International Journal of Building Pathology and Adaptation, 39(5), pp. 756-765. ISSN 23984708

Forbes, D; Smith, S D and Horner, M (2007) A case-based reasoning approach for selecting risk management techniques. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Frandson, A (2019) Takt time planning as a work structuring method to improve construction work flow. PhD thesis, University of California, Berkeley, USA.

Fredericks, T; Abudayyeh, O; Palmquist, M and Torres, H N (2002) Mechanical contracting safety issues. Journal of Construction Engineering and Management, 128(2), pp. 186-193. ISSN 0733-9364

Freitas, J A; Sanquetta, C R; Iwakiri, S and de Mello Maron da Costa, M D R (2021) The use of wood construction materials as a way of carbon storage in residential buildings in Brazil. International Journal of Construction Management, 21(3), pp. 292-298. ISSN 1562-3599

Friedman, A and Cammalleri, V (1996) Advanced wood-frame construction details in Canada. Building Research & Information, 24(5), pp. 270-278. ISSN 0961-3218

Friedrich, D (2022) Consumer and expert behaviour towards biobased wood-polymer building products: A comparative multi-factorial study according to theory of planned behaviour. Architectural Engineering and Design Management, 18(1), pp. 73-92. ISSN 1745-2007

Fuller, R J and Luther, M B (2002) Thermal simulation of an Australian university building. Building Research & Information, 30(4), pp. 255-263. ISSN 0961-3218

Gai, X (2012) Fibre reinforced polymer (FRP) stay-in-place (SIP) participating formwork for new construction. PhD thesis, University of Bath, UK.

Ganguly, I (2008) Modeling alternatives and visualization of product adoption and usage in the residential construction industry. PhD thesis, University of Washington, USA.

Ganguly, I; Bowers, T; Eastin, I and Cantrell, R (2013) Role of green building programs in enhancing the usage of environmentally certified wood in the U.S. Residential construction industry. International Journal of Construction Education and Research, 9(3), pp. 183-202. ISSN 1557-8771

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Gharaibeh, L; Eriksson, K M; Lantz, B; Matarneh, S and Elghaish, F (2024) Toward digital construction supply chain-based industry 4.0 solutions: Scientometric-thematic analysis. Smart and Sustainable Built Environment, 13(1), pp. 42-62. ISSN 2046-6099

Ghazi Wakili, K; Bundi, R and Binder, B (2004) Effective thermal conductivity of vacuum insulation panels. Building Research & Information, 32(4), pp. 293-299. ISSN 0961-3218

Giesekam, J; Barrett, J R and Taylor, P (2016) Construction sector views on low carbon building materials. Building Research & Information, 44(4), pp. 423-444. ISSN 0961-3218

Glick, S; Porter, D and Smith, C (2012) Student visualization: Using 3-d models in undergraduate construction management education. International Journal of Construction Education and Research, 8(1), pp. 26-46. ISSN 1557-8771

Goldwyn, B (2022) Drawing from local, multi-hazard safety perceptions and engineering assessments for safer housing. PhD thesis, University of Colorado at Boulder, USA.

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Goubran, S; Masson, T and Walker, T (2020) Diagnosing the local suitability of high-rise timber construction. Building Research & Information, 48(1), pp. 101-123. ISSN 0961-3218

Gough, K (1992) From bamboo to bricks: Self-help housing and the building materials industry in urban Colombia. PhD thesis, University of London, University College London, UK.

Gunderson, D E and Gloeckner, G W (2011) Superintendent competencies and attributes required for success: A national study comparing construction professionals' opinions. International Journal of Construction Education and Research, 7(4), pp. 294-311. ISSN 1557-8771

Gupta, N K; Thakre, G D and Kumar, M (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology, 18(5), pp. 1357-1370. ISSN 1726-0531

Habibi, S (2019) Design concepts for the integration of bamboo in contemporary vernacular architecture. Architectural Engineering and Design Management, 15(6), pp. 475-489. ISSN 1745-2007

Hailemariam, E K; Hailemariam, L M; Amede, E A and Nuramo, D A (2023) Identification of barriers, benefits and opportunities of using bamboo materials for structural purposes. Engineering, Construction and Architectural Management, 30(7), pp. 2716-2738. ISSN 0969-9988

Halpin, J E (1999) The impact of out-of-town stores on local wildlife habitats. PhD thesis, University of Southampton, UK.

Hanna, A S; Chang, C K; Lackney, J A and Sullivan, K T (2007) Impact of overmanning on mechanical and sheet metal labor productivity. Journal of Construction Engineering and Management, 133(1), pp. 22-28. ISSN 0733-9364

Hanna, A S and Senouci, A B (1995) Design optimization of concrete-slab forms. Journal of Construction Engineering and Management, 121(2), pp. 215-221. ISSN 0733-9364

Hanna, A S and Skiffington, M A (2010) Effect of preconstruction planning effort on sheet metal project performance. Journal of Construction Engineering and Management, 136(2), pp. 235-241. ISSN 0733-9364

Hariyadi, A; Fukuda, H and Ma, Q (2017) The effectiveness of the parametric design 'sudare' blind as external shading for energy efficiency and visibility quality in Jakarta. Architectural Engineering and Design Management, 13(5), pp. 384-403. ISSN 1745-2007

Hasan, M R; Sagar, M S I and Ray, B C (2023) Barriers to improving construction and demolition waste management in Bangladesh. International Journal of Construction Management, 23(14), pp. 2333-2347. ISSN 1562-3599

Hassan, O A B and Johansson, C (2018) Glued laminated timber and steel beams: A comparative study of structural design, economic and environmental consequences. Journal of Engineering, Design and Technology, 16(3), pp. 398-417. ISSN 1726-0531

Hatayama, H and Tahara, K (2016) Using decomposition analysis to forecast metal usage in the building stock. Building Research & Information, 44(1), pp. 63-72. ISSN 0961-3218

Hayette, F; Abadou, Y and Ghrieb, A (2021) Bio-waste influence on air lime mortar performance corrosion: optimization using the surface response method. Journal of Engineering, Design and Technology, 19(5), pp. 1124-1137. ISSN 1726-0531

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

Hemphill, L M (2009) Building bridges: A study of coordination in projects. PhD thesis, University of Michigan, USA.

Hemström, K; Gustavsson, L and Mahapatra, K (2017) The sociotechnical regime and Swedish contractor perceptions of structural frames. Construction Management and Economics, 35(4), pp. 184-195. ISSN 01446193

Henriques, D F; Clara, M P and Flores-Colen, I (2023) Inspection and structural assessment of traditional timber floors: A practical systematization. International Journal of Building Pathology and Adaptation, 41(3), pp. 675-691. ISSN 23984708

Himpe, E; Trappers, L; Debacker, W; Delghust, M; Laverge, J; Janssens, A; Moens, J and Van Holm, M (2013) Life cycle energy analysis of a zero-energy house. Building Research & Information, 41(4), pp. 435-449. ISSN 0961-3218

Hindman, D P; Bamberg, C R and Nussbaum, M A (2014) Bracing of wood composite I-joists to resist lateral buckling from walking loads. Journal of Construction Engineering and Management, 140(9): 04014037, ISSN 0733-9364

Hindman, D P; Timko, P D and Nussbaum, M A (2013) Mechanical response of unbraced wood composite I-joist to walking loads. Journal of Construction Engineering and Management, 139(11): 4013023, ISSN 0733-9364

Holtström, J; Kenlind, S S and Nord, T (2024) Project-based business models in the construction industry: key success factors for sustainable timber extension projects. Construction Management and Economics, 42(7), pp. 656-669. ISSN 01446193

Hopkin, D J (2011) The fire performance of engineered timber products and systems. EngD thesis, Loughborough University, UK.

Horvath, A (1997) Estimation of environmental implications of construction materials and designs using life cycle assessment techniques. PhD thesis, Carnegie Mellon University, USA.

Huang, X; Bernd, D and Bernold, L E (1996) Innovative technology development for safe excavation. Journal of Construction Engineering and Management, 122(1), pp. 91-96. ISSN 0733-9364

Ilgın, H E; Karjalainen, M and Pelsmakers, S (2024) Finnish architects' attitudes towards multi-storey timber-residential buildings. International Journal of Building Pathology and Adaptation, 42(3), pp. 352-368. ISSN 23984708

Ioannidou, D (2016) On sustainability aspects through the prism of stone as a material for construction. DSc thesis, ETH Zürich, Switzerland.

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Joseph Oladiran, O and Rogers Simeon, D (2023) Consciousness and prospects of autoclaved aerated concrete (aac) blocks for wall construction: Comparative study Nigeria and South Africa. Journal of Construction Business and Management, 6(2), pp. 1-10. ISSN 2521-0165

Jung, C; Ismail, M A; Arar, M and AlQassimi, N (2026) Mitigating indoor air pollution in uae's high-rise apartment buildings: A study on eco-friendly materials and adsorbents. Smart and Sustainable Built Environment, 15(1), pp. 40-61. ISSN 2046-6099

Junnila, S (2004) The environmental impact of an office building throughout its life cycle. PhD thesis, Helsinki University of Technology, Finland.

Kalu, I E and Ogbonna, N J (2021) Investigation of environmental effect of stone quarrying activities on soil and water in Akpoha and Ishiagu communities of Ebonyi State, Nigeria. International Journal of Construction Management, 21(12), pp. 1185-1199. ISSN 1562-3599

Kanai, Júlia (2025) Systematic management model based on lean construction through a mobile app for industrialized buildings in the frame system. PhD thesis, Universidade Estadual de Campinas, Brazil.

Karshenas, S (1997) Strength variability of conventional slab formwork systems. Journal of Construction Engineering and Management, 123(3), pp. 324-330. ISSN 0733-9364

Kere, K J (2023) Probabilistic model development and risk management strategies for pipelines with anomalies. PhD thesis, Marquette University, USA.

Khan, L R (2014) Reliability estimation and risk-cost optimisation of underground pipelines. PhD thesis, University of Greenwich, UK.

Kim, S. and Liang, Y. (2026) Dissecting highway construction cost inflation: A two-decade analysis of inflation types using the national highway construction cost index. Journal of Construction Engineering and Management, 152(7): 04026087, ISSN 0733-9364

Kim, H and Ham, Y (2021) Increasing reliability of participatory sensing for utility pole condition assessment using fuzzy inference. Journal of Construction Engineering and Management, 147(1): 0001968, ISSN 0733-9364

Kisi, K P; Mani, N; Rojas, E M and Foster, E T (2018) Estimation of optimal productivity in labor-intensive construction operations: Advanced study. Journal of Construction Engineering and Management, 144(10): 04018097, ISSN 0733-9364

Kleemann, F; Lederer, J; Aschenbrenner, P; Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(1), pp. 51-62. ISSN 0961-3218

Krook, J (2006) Concentrate or dilute contaminants? Strategies for Swedish wood waste. PhD thesis, Linköping University, Sweden.

Laguarda Mallo, M F (2017) Critical factors in the willingness to adopt innovative woodbased building materials in the construction industry: The case of CLT. PhD thesis, University of Minnesota, USA.

Lee, D (2023) Development of a real-time automated mobile robotic welding system in construction. PhD thesis, North Carolina State University, USA.

Lee, G and Kim, S (2012) Case study of mass customization of double-curved metal façade panels using a new hybrid sheet metal processing technique. Journal of Construction Engineering and Management, 138(11), pp. 1322-1330. ISSN 0733-9364

Lee, J M; Anumba, C J; Gibb, A G and Agbasi, E (2002) The current status of the cladding sector and its opportunities for computer-integrated manufacture (CIM). In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Lei, Z; Sadiq Altaf, M; Cheng, Z; Liu, H and Tang, S (2023) Measurement of information loss and transfer impacts of technology systems in offsite construction processes. Journal of Construction Engineering and Management, 149(9): 05023011, ISSN 0733-9364

Li, C (2023) Efficient and accurate assessment of fire spread over external claddings in high-rise buildings. PhD thesis, University of Manchester, UK.

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Liang, X; Rasheed, U; Cai, J; Wibranek, B and Awolusi, I (2024) Impacts of collaborative robots on construction work performance and worker perception: Experimental analysis of human-robot collaborative wood assembly. Journal of Construction Engineering and Management, 150(8): 04024087, ISSN 0733-9364

Lingard, H (1995) Safety in Hong Kong's construction industry: changing worker behaviour. PhD thesis, University of Hong Kong, Hong Kong.

Lingard, H and Rowlinson, S (1998) Behaviour-based safety management in Hong Kong's construction industry: The results of a field study. Construction Management and Economics, 16(4), pp. 481-488. ISSN 01446193

Lisø, K R; Hygen, H O; Kvande, T and Thue, J V (2006) Decay potential in wood structures using climate data. Building Research & Information, 34(6), pp. 546-551. ISSN 0961-3218

Liu, H; Zhang, F; Ma, R; Wang, L; Chen, Z; Zhang, Q and Guo, L (2024) Intelligent noncontact structural displacement detection method based on computer vision and deep learning. Journal of Construction Engineering and Management, 150(10): 04024127, ISSN 0733-9364

Liu, Lan (2020) Design guidance and development of construction stormwater technologies. PhD thesis, Auburn University, USA.

Lizarralde, G; Valladares, A; Okoman, A H; Bourgault, M; Binet, J; Hasan, L; Pearl, D; Herazo, B and Boudreau, J P (2025) Trajectories of innovation in wood construction: an actor-network analysis of building decarbonization practices in Canada. Construction Management and Economics, 43(8), pp. 617-636. ISSN 0144-6193

Luo, Y (2008) Decision support for prefabrication strategy selection on building systems. PhD thesis, Pennsylvania State University, USA.

Maghiar, M (2011) Crew coordination modeling in wood-framing construction. PhD thesis, Arizona State University, USA.

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Mahapatra, K and Gustavsson, L (2008) Multi-storey timber buildings: Breaking industry path dependency. Building Research & Information, 36(6), pp. 638-648. ISSN 0961-3218

Mahapatra, K; Gustavsson, L and Hemstrm, K (2012) Multi-storey wood-frame buildings in Germany, Sweden and the UK. Construction Innovation, 12(1), pp. 62-85. ISSN 1471-4175

Manamgoda, M G N; Perera, B A K S and Perera, C S R (2018) Impact of interest rates of bank loans on road construction: The case of Sri Lanka. Journal of Engineering, Design and Technology, 16(4), pp. 518-532. ISSN 1726-0531

Manara, N; Rosset, L; Zambelli, F; Zanola, A and Califano, A (2024) Natural climate reconstruction in the Norwegian stave churches through time series processing with variational autoencoders. International Journal of Building Pathology and Adaptation, 42(1), pp. 18-34. ISSN 23984708

Mani, N (2015) A framework for estimating labor productivity frontiers. PhD thesis, University of Nebraska - Lincoln, USA.

Manrique, J D; Al-Hussein, M; Bouferguene, A; Safouhi, H and Nasseri, R (2011) Combinatorial algorithm for optimizing wood waste in framing designs. Journal of Construction Engineering and Management, 137(3), pp. 188-197. ISSN 0733-9364

Marteinsson, B (2003) Durability and the factor method of ISO 15686-1. Building Research & Information, 31(6), pp. 416-426. ISSN 0961-3218

Martinez, P; Livojevic, M; Jajal, P; Aldrich, D R; Al-Hussein, M and Ahmad, R (2020) Simulation-driven design of wood framing support systems for off-site construction machinery. Journal of Construction Engineering and Management, 146(7): 04020075, ISSN 0733-9364

Masu, S; Gichunge, H and K'Akumu, O A (2012) Component ratios of new building costs in Nairobi: A contractors' perspective. Journal of Financial Management of Property and Construction, 17(3), pp. 222-234. ISSN 1366-4387

McMichael, P S; Iglesias, M C; Johnston, J; Holley, P and Peresin, M S (2025) Case study of bio-based coagulation and flocculation systems to treat contaminants in concrete washout water. International Journal of Construction Education and Research, 21(3), pp. 371-381. ISSN 1557-8771

Meng, S (2023) Development of a regional wind risk assessment framework for wood-frame single-family residential building stock. PhD thesis, University of California, Los Angeles, USA.

Miglioranza, P; Scanu, A; Simionato, G; Sinigaglia, N and Califano, A (2024) Machine learning and engineering feature approaches to detect events perturbing the indoor microclimate in ringebu and heddal stave churches (Norway). International Journal of Building Pathology and Adaptation, 42(1), pp. 35-47. ISSN 23984708

Mimendi Cruz, Jose Leonel (2021) Digital workflow for the design, construction and management of natural bamboo pole structures. PhD thesis, University College London, UK.

Mogollon, J D M (2009) Automation of design and drafting for wood frame structures and construction waste minimization. PhD thesis, University of Alberta, Canada.

Mpakati-Gama, E C; Brown, A and Sloan, B (2016) Embodied energy and carbon analysis of urban residential buildings in Malawi. International Journal of Construction Management, 16(1), pp. 1-12. ISSN 1562-3599

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Mullens, M A and Arif, M (2006) Structural insulated panels: Impact on the residential construction process. Journal of Construction Engineering and Management, 132(7), pp. 786-794. ISSN 0733-9364

Na, R (2013) Property rights analysis of building material pricing. PhD thesis, University of Hong Kong, Hong Kong.

Nabi, M A; El-Adaway, I H and Assaad, R H (2024) Modeling inflation transmission among different construction materials. Journal of Construction Engineering and Management, 150(5): 04024024, ISSN 0733-9364

Naghipour, M; Gholampour, A A and Nematzadeh, M (2013) Analytical and experimental study on damping ratio of GRP-reinforced glulam beams. Journal of Engineering, Design and Technology, 11(1), pp. 44-58. ISSN 1726-0531

Nguyen, T T (2017) Modeling of CLT creep behavior and real-time hybrid simulation of a CLT-LiFS building. PhD thesis, University of Alabama, USA.

Nordby, A S (2011) Carbon reductions and building regulations: The case of Norwegian mountain cabins. Building Research & Information, 39(6), pp. 553-565. ISSN 0961-3218

Noshadravan, A; Miller, T R and Gregory, J G (2017) A lifecycle cost analysis of residential buildings including natural hazard risk. Journal of Construction Engineering and Management, 143(7): 04017017, ISSN 0733-9364

Nursyamsi, N; Tarigan, J; Aswin, M; Abu Bakar, B H and Hardjasaputra, H (2024) Structural behaviour of the strengthened reinforced concrete beams using ultra high-performance fibre reinforced concrete layer. Construction Innovation, 24(3), pp. 725-746. ISSN 1471-4175

Nzabonimpa, J D and Hong, W K (2018) Novel precast erection method of interlocking mechanical joints using couplers. Journal of Construction Engineering and Management, 144(6): 04018036, ISSN 0733-9364

Obonyo, E (2012) Developing enhanced, lignocellulosic fibre reinforcement for low-cost, cementitious, construction materials. Architectural Engineering and Design Management, 8(1), pp. 30-41. ISSN 1745-2007

Ochiai, C (2022) Windbreak stonewalls in a mountainous village of Japan: A case study of tsuchigoya in hongu-cho, tanabe city. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 197-210. ISSN 1759-5916

Ofori-Boadu, A N; Bryant, D; Bock-Hyeng, C; Assefa, Z; Aryeetey, F; Munkaila, S and Fini, E (2022) Physiochemical characterization of agricultural waste biochars for partial cement replacement. International Journal of Building Pathology and Adaptation, 40(4), pp. 569-586. ISSN 23984708

Ogundare, I.; Kassa, R.; Maali, O.; Lines, B.; Smithwick, J. and Sullivan, K. (2026) Skillsets differences among field leaders in the US sheet metal and air conditioning trades. Built Environment Project and Asset Management, 16(3), pp. 561-577. ISSN 2044-124X

Ojolo, S J; Damisa, O and Iyekolo, O (2011) Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining. Journal of Engineering, Design and Technology, 9(2), pp. 130-142. ISSN 1726-0531

Olbina, S and Glick, S (2023) Using integrated hands-on and virtual reality (VR) or augmented reality (AR) approaches in construction management education. International Journal of Construction Education and Research, 19(3), pp. 341-360. ISSN 1557-8771

Orooji, F (2015) Risk-based wind loss and mitigation for residential wood framed construction. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Ou, J; Chen, Z; Long, W; Chen, D and Zhang, Y (2024) Vibrational performance of wood floors in traditional residential timber structures in southwest China. Architectural Engineering and Design Management, 20(6), pp. 1529-1542. ISSN 1745-2007

Patel, K R (2024) Comparative assessment of interior wall construction: A life cycle thinking based evaluation. PhD thesis, University of Windsor, Canada.

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Peltola, T and Mansikkamäki, P (2007) Formable multilayer PCB structure: Design and technology demonstrator. Journal of Engineering, Design and Technology, 5(2), pp. 148-158. ISSN 1726-0531

Peng, J L (2002) Stability analyses and design recommendations for practical shoring systems during construction. Journal of Construction Engineering and Management, 128(6), pp. 536-544. ISSN 0733-9364

Peng, J L (2004) Structural modeling and design considerations for double-layer shoring systems. Journal of Construction Engineering and Management, 130(3), pp. 368-377. ISSN 0733-9364

Pesantes-Tavares, E R (2011) Construction worker health: A web-based approach to selecting alternatives to hazardous procedures. PhD thesis, University of Florida, USA.

Peveler, E (2018) The supply of building materials to construction projects in Roman Oxfordshire: Logistics, economics, and social significance. PhD thesis, University of Oxford, UK.

Pieters, W D and Tzoneva, R (2021) Investigation of an iec 61850 standard-based process bus implementation of a protection and control scheme for parallelly connected transformers. Journal of Engineering, Design and Technology, 19(4), pp. 850-875. ISSN 1726-0531

Platt, R T (1998) Development of a ready-to-assemble construction system. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Poon, S-W (2002) Analysing and predicting falsework failure in Hong Kong. PhD thesis, Loughborough University, UK.

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Pridmore, A B (2009) Development of composite renewal systems for rapid rehabilitation and construction of bridge decks. PhD thesis, University of California, San Diego, USA.

Prigge, D V (2013) Experimentation of managerial techniques for the optimization of a voluntary construction workforce. PhD thesis, Arizona State University, USA.

Pushpakumara, B H J; Gunasekara, M T and Gannile, Y M T D (2023) Variation of mechanical and chemical properties of old and new clay bricks. Journal of Construction Engineering and Management, 149(4): 04023006, ISSN 0733-9364

Qin, Y and Bulbul, T (2023) An EEG-based mental workload evaluation for ar head-mounted display use in construction assembly tasks. Journal of Construction Engineering and Management, 149(9): 04023088, ISSN 0733-9364

Rajagopalan, N (2011) Residential life cycle assessment modeling for green buildings and building products. PhD thesis, University of Pittsburgh, USA.

Rasmussen, F. N.; Birkved, M. and Birgisdóttir, H. (2020) Low-carbon design strategies for new residential buildings: Lessons from architectural practice. Architectural Engineering and Design Management, 16(5), pp. 374-390. ISSN 1745-2007

Rasmussen, F N; Birkved, M and Birgisdóttir, H (2020) Low- carbon design strategies for new residential buildings: lessons from architectural practice. Architectural Engineering and Design Management, 16(5), pp. 374-390. ISSN 1745-2007

Ratcliffe, J. W.; Alnaqshabandy, H.; Fox, M. and Goodhew, S. (2026) Optimising thermal performance in historic solid wall buildings: The role of orientation, natural insulation and building simulation. International Journal of Building Pathology and Adaptation, pp. 1-18. ISSN 2398-4708

Ratcliffe, J. W.; Alnaqshabandy, H.; Fox, M. and Goodhew, S. (2026) Optimising thermal performance in historic solid wall buildings: The role of orientation, natural insulation and building simulation. International Journal of Building Pathology and Adaptation, pp. 1-18. ISSN 2398-4708

Rideout, G W (2011) U.S. Metal building industry: A qualitative study on managing change to create a competitive advantage. PhD thesis, University of Phoenix, USA.

Riggio, M and Dilmaghani, M (2020) Structural health monitoring of timber buildings: A literature survey. Building Research & Information, 48(8), pp. 817-837. ISSN 0961-3218

Rosso, S (2007) Environmental life-cycle of domestic kitchen refurbishment. PhD thesis, University of Brighton, UK.

Ruhl, V R (1997) Computer-aided design and manufacturing of complex-shaped concrete formwork. DDes thesis, Harvard University, USA.

Ruokamo, E; Franzini, F; Lähtinen, K and Toppinen, A (2024) To renovate or build with wood? Results from Finnish citizen survey data. Construction Management and Economics, 42(10), pp. 886-901. ISSN 01446193

Said, H M and Kandimalla, P (2018) Performance measurement of building sheet-metal ductwork prefabrication under batch production settings. Journal of Construction Engineering and Management, 144(2): 4017107, ISSN 0733-9364

Salmi, A; Jussila, J and Hämäläinen, M (2022) The role of municipalities in transformation towards more sustainable construction: The case of wood construction in Finland. Construction Management and Economics, 40(11-12), pp. 934-954. ISSN 01446193

Sanseverino, Anna (2023) Application of BIM methodology for structural inspection and maintenance eco-systems: Semi-automated monitoring procedures to implement different kinds of data into enriched cooperative systems. PhD thesis, Università degli Studi di Salerno, Italy.

Sanusi, K O and Oliver, G J (2009) Effects of grain size on mechanical properties of nanostructured copper alloy by severe plastic deformation (SPD) process. Journal of Engineering, Design and Technology, 7(3), pp. 335-341. ISSN 1726-0531

Sarah Slaughter, E (1999) Assessment of construction processes and innovations through simulation. Construction Management and Economics, 17(3), pp. 341-350. ISSN 01446193

Sathiya, P; Abdul Jaleel, M Y and Shanmugarajan, B (2012) Analysis of metallurgical and mechanical properties of laser welded super austenitic stainless steel. Journal of Engineering, Design and Technology, 10(1), pp. 110-127. ISSN 1726-0531

Sayed, Ahmed Yehia Abdel Aziz El (2025) Design of novel formwork system and development of numerical model for comparison between formwork systems. PhD thesis, The American University in Cairo, Egypt.

Selman, A D; Heiselberg, H L and Gade, A N (2021) Attitudes towards using wood in the Danish building sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Shah R, W S R A (2013) Challenges and solutions for management of FRP usage in the UK rail sector. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Shahid, M. U.; Thaheem, M. J. and Arshad, H. (2023) Quantification and benchmarking of construction waste and its impact on cost: A case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Shahid, M U; Thaheem, M J and Arshad, H (2023) Quantification and benchmarking of construction waste and its impact on cost: a case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Shan, B; Chen, B; Wen, J and Xiao, Y (2023) Thermal performance of cross-laminated timber (CLT) and cross-laminated bamboo and timber (clbt) panels. Architectural Engineering and Design Management, 19(5), pp. 511-530. ISSN 1745-2007

Shiha, A and El-Adaway, I H (2026) From ports to projects: Estimating the impact of supply chain volatility and trade policy changes on construction material prices. Journal of Construction Engineering and Management, 152(6): 04026064, ISSN 0733-9364

Shook, S R (1997) Innovation and the United States residential construction industry: An integrated model of determinants of firm innovativeness for engineered wood products. PhD thesis, University of Washington, USA.

Sia, M K; Yew, V W C and Siew, C L (2018) Influence of feng shui factors on house buying intention of Malaysian Chinese. Architectural Engineering and Design Management, 14(6), pp. 427-439. ISSN 1745-2007

Sibanda, V; Mpofu, K and Trimble, J (2021) Methodology for the design of a reconfigurable guillotine shear and bending press machine (rgs&BPM). Journal of Engineering, Design and Technology, 19(6), pp. 1317-1343. ISSN 1726-0531

Sibanda, V; Mpofu, K; Trimble, J and Kanganga, M (2020) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology, 18(5), pp. 991-1014. ISSN 1726-0531

Silva, Alcides Belfort da (2023) Proposal for sustainable civil construction in the city of Ribeirão Preto/SP from the perspective of environmental preservation. PhD thesis, Universidade de Ribeirão Preto, Brazil.

Sodagar, B; Rai, D; Jones, B; Wihan, J and Fieldson, R (2011) The carbon-reduction potential of straw-bale housing. Building Research & Information, 39(1), pp. 51-65. ISSN 0961-3218

Somani, N; Singh, N and Gupta, N K (2021) Joining and characterization of ss-430 using microwave hybrid heating technique. Journal of Engineering, Design and Technology, 19(6), pp. 1344-1357. ISSN 1726-0531

Stapelberg, Rudolph Frederick (2004) Methodology for determining the integrity of process engineering design. PhD thesis, Griffith University, Australia.

Stefańska, A; Cygan, M; Batte, K and Pietrzak, J (2021) Application of timber and wood-based materials in architectural design using multi-objective optimisation tools. Construction Economics and Building, 21(3), pp. 105-121. ISSN 2204-9029

Stehn, L (2002) Environmental labelling of timber-framed dwellings and their building components. Building Research & Information, 30(4), pp. 248-254. ISSN 0961-3218

Stellacci, S; Domingos, L and Resende, R (2024) Integrated computational approaches for energy retrofit of historical buildings in extreme climate environments. International Journal of Building Pathology and Adaptation, 42(1), pp. 114-132. ISSN 23984708

Subchan, B R; Tayeh, B A; Widayanto, E and Wiswamitra, K A (2024) Bamboo's evolution as a sustainable material: A comprehensive exploration and practical integration as a structural element in concrete, bridge frameworks, and architectural perspectives. Architectural Engineering and Design Management, 20(6), pp. 1566-1588. ISSN 1745-2007

Sullivan, J J (2016) Developing a decision-making framework for market entry in the sheet metal construction industry. PhD thesis, Arizona State University, USA.

Sullivan, K T (2004) Quantification of the cumulative impact of change orders on sheet metal labor productivity. PhD thesis, University of Wisconsin - Madison, USA.

Svatoš-Ražnjević, H; Boeva, Y; Kropp, C and Menges, A (2025) Trajectories from standard to incremental and pioneering innovation in timber construction: Multi-storey timber buildings in Germany, Austria, and Switzerland. Building Research & Information, 53(6), pp. 734-758. ISSN 0961-3218

Sánchez Vivas, L; Costello, K; Mobley, S; Mihelcic, J R and Mullins, G (2022) Determination of safety factors for structural bamboo design applications. Architectural Engineering and Design Management, 18(1), pp. 26-37. ISSN 1745-2007

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Tokarczyk, J A (2011) An examination of strategic challenges and opportunities in the wood-based building product industry. PhD thesis, Oregon State University, USA.

Toppinen, A; Sauru, M; Pätäri, S; Lähtinen, K and Tuppura, A (2019) Internal and external factors of competitiveness shaping the future of wooden multistory construction in Finland and Sweden. Construction Management and Economics, 37(4), pp. 201-216. ISSN 01446193

Treloar, G J (1998) A comprehensive embodied energy analysis framework. PhD thesis, Deakin University, Australia.

Tsao, C C Y (2005) Use of work structuring to increase performance of project-based production systems. PhD thesis, University of California, Berkeley, USA.

Umar, M; Ofem, M I; Anwar, A S and Salisu, A G (2021) Modelling of mechanical properties of Pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), pp. 809-827. ISSN 1726-0531

Venugopal, P and Murugan, N (2012) Corrosion analysis of GTA welded metal matrix composites. Journal of Engineering, Design and Technology, 10(1), pp. 93-109. ISSN 1726-0531

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Wagner, E R (2003) Using quality function deployment to achieve a market orientation: An application with wood products companies. PhD thesis, Oregon State University, USA.

Walker, L (2022) Scenario-based robustness assessment for low-emission building retrofit. DSc thesis, ETH Zürich, Switzerland.

Wang, D; Dai, F; Ning, X; Dong, R G and Wu, J Z (2017) Assessing work-related risk factors on low back disorders among roofing workers. Journal of Construction Engineering and Management, 143(7): 04017026, ISSN 0733-9364

Wang, M; Altaf, M S; Al-Hussein, M and Ma, Y (2020) Framework for an IoT-based shop floor material management system for panelized homebuilding. International Journal of Construction Management, 20(2), pp. 130-145. ISSN 1562-3599

Wiegand, E and Ramage, M (2022) The impact of policy instruments on the first generation of tall wood buildings. Building Research & Information, 50(3), pp. 255-275. ISSN 0961-3218

Wu, K (2019) Robotic assembly: A generative architectural design strategy through component arrangements in highly-constrained design spaces. PhD thesis, Princeton University, USA.

Wu, W; Sandoval, A; Gunji, V; Ayer, S K; London, J; Perry, L; Patil, K and Smith, K (2020) Comparing traditional and mixed reality-facilitated apprenticeship learning in a wood-frame construction lab. Journal of Construction Engineering and Management, 146(12): 04020139, ISSN 0733-9364

Yin, Y-J (2010) Risk analysis of light-frame wood construction due to multiple hazards. PhD thesis, Michigan Technological University, USA.

Zara, R B; Moro, G N; Martins, R d S V and Giglio, T G F (2025) Application of a decision tree approach to predict energy consumption in lightweight buildings under subtropical climate. Smart and Sustainable Built Environment, 14(7), pp. 2069-2089. ISSN 2046-6099

Zea Escamilla, E (2015) Development of simplified life cycle assessment methodology for construction materials and buildings outside of the European context through the use of geographic information systems. DSc thesis, ETH Zürich, Switzerland.

Zeb, J (2017) An eco asset ontology towards effective eco asset management. Built Environment Project and Asset Management, 7(4), pp. 388-399. ISSN 2044-124X

Zeinali Kalkhoran, A; Platt, L S; Iovine, N; Brown, S and Pollitt, B (2025) An agent-based modeling approach for infection prevention predesign: simulating the spread of pathogens between humans and the environment in an Intensive Care Unit. Architectural Engineering and Design Management, 21(4), pp. 746-767. ISSN 1745-2007

Zhao, B; Yu, Y; Xu, Y and Guo, H (2024) Bamboo as a sustainable construction material for residential buildings in the cold and severe cold regions of China. Architectural Engineering and Design Management, 20(6), pp. 1511-1528. ISSN 1745-2007

Zhu, B (1999) Effect of cooling by water flowing in nonmetal pipes embedded in mass concrete. Journal of Construction Engineering and Management, 125(1), pp. 61-68. ISSN 0733-9364