Items with Subject: sustainability and energy

Abanomi, W M (2005) Environmental design of prototype school buildings in hot, arid regions with special reference to Riyadh, Saudi Arabia. PhD thesis, Cardiff University, UK.

Abd-Elnaby, A-E H A and Reffat, R M (2024) Enhancing BIM-BEM integration: Solutions for efficient data exchange and energy performance assessment. Architectural Engineering and Design Management, 20(3), pp. 596-623. ISSN 1745-2007

Abdallah, M A A (2014) Optimizing the selection of sustainability measures for existing buildings. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Abdallah, M A A; El-Rayes, K and Liu, L (2016) Minimizing upgrade cost to achieve LEED certification for existing buildings. Journal of Construction Engineering and Management, 142(2): 04015073, ISSN 0733-9364

Abdel-Hamid, M.; Abdelhaleem, H. M. and Abd El-Razek Fathy, A. E. (2025) Assessing the implementation of BIM for enhancing green building certification evaluations. Architectural Engineering and Design Management, 21(5), pp. 1040-1056. ISSN 1745-2007

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Abediniangerabi, B; Shahandashti, M and Makhmalbaf, A (2021) Coupled transient heat and moisture transfer investigation of facade panel connections. Journal of Engineering, Design and Technology, 19(3), pp. 758-777. ISSN 1726-0531

Abu Aisheh, Y (2011) Climate change and the built environment: an evaluation of sustainable refurbishment options for higher education buildings in the UK. PhD thesis, University of Birmingham, UK.

Abubakri, S; Mangat, P S; Grigoriadis, K and Starinieri, V (2025) Pore properties and moisture loss of repair mortars under low-impact microwave curing. International Journal of Building Pathology and Adaptation, 43(4), pp. 749-765. ISSN 2398-4708

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Acre, F and Wyckmans, A (2015) The impact of dwelling renovation on spatial quality: The case of the Arlequin neighbourhood in Grenoble, France. Smart and Sustainable Built Environment, 4(3), pp. 268-309. ISSN 2046-6099

Adan, H and Fuerst, F (2015) Modelling energy retrofit investments in the UK housing market: A microeconomic approach. Smart and Sustainable Built Environment, 4(3), pp. 251-267. ISSN 2046-6099

Ade-Ojo, O C (2022) Awareness of the LEED requirements for green housing development among built-environment professionals in Nigeria. Built Environment Project and Asset Management, 12(4), pp. 521-536. ISSN 2044-124X

Adekanye, O G (2019) Evaluation of building policies, programs, and potential for energy efficiency in the United States. PhD thesis, Carnegie Mellon University, USA.

Adel, R; Megahed, N; Hassan, A M and Shahda, M (2025) Evolution of the courtyard to the skycourt: A bibliometric analysis of research trends. International Journal of Building Pathology and Adaptation, 43(2), pp. 257-280. ISSN 2398-4708

Adi Maimun, N H (2016) Price and rent effects of energy efficiency in residential properties: evidence from the Belfast Metropolitan area. PhD thesis, Ulster University, UK.

Adzande, P; Gyuse, T T and Atser, J (2018) Correlates of crime in urban Makurdi, Nigeria. African Journal of Built Environment Research, 2(1), pp. 21-40. ISSN 2414-0236

Agha, R H M (2016) The role of intelligent systems in traditional courtyard houses in Baghdad, Iraq. PhD thesis, University of Newcastle upon Tyne, UK.

Aghimien, E I and Li, D H W (2022) Application of luminous efficacies for daylight illuminance data generation in subtropical Hong Kong. Smart and Sustainable Built Environment, 11(2), pp. 271-293. ISSN 2046-6099

Ahadzie, D K; Opoku, R; Opoku Ware, S N and Mensah, H (2021) Analysis of occupant behaviour in the use of air-conditioners in public buildings in developing countries: Evidence from Ghana. International Journal of Building Pathology and Adaptation, 39(2), pp. 259-282. ISSN 23984708

Ahern, E (2022) A framework for improving the process of building certification to enhance energy efficiency: the case of Ireland. DProf thesis, Anglia Ruskin University, UK.

Ahmad, T; Thaheem, M J and Anwar, A (2016) Developing a green-building design approach by selective use of systems and techniques. Architectural Engineering and Design Management, 12(1), pp. 29-50. ISSN 1745-2007

Ahmed, V; Saboor, S; Almarzooqi, F A; Alshamsi, H A; Alketbi, M A and Al Marei, F A (2021) A comparative study of energy performance in educational buildings in the UAE. Construction Economics and Building, 21(3), pp. 33-57. ISSN 2204-9029

Ahn, C R and Lee, S (2013) Importance of operational efficiency to achieve energy efficiency and exhaust emission reduction of construction operations. Journal of Construction Engineering and Management, 139(4), pp. 404-413. ISSN 0733-9364

Akande, O K (2015) Factors influencing operational energy performance and refurbishment of UK listed church buildings: towards a strategic management framework. PhD thesis, Anglia Ruskin University, UK.

Akbar, M R (2012) Evaluating sustainability in high-rise developments. PhD thesis, Ulster University, UK.

Akhimien, N (2022) A framework for incorporating circular economy in the design of energy efficient residential buildings in Nigeria. PhD thesis, Cardiff University, UK.

Aktas, C B (2011) Impact of product lifetime on life cycle assessment results. PhD thesis, University of Pittsburgh, USA.

Al Bunni, A (2020) Refurbishment of UK state school buildings: a strategy and framework for BIM-based digital twinning. PhD thesis, De Montfort University, UK.

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al Sanad, S A (2014) The promotion of sustainable construction practices in Kuwait. PhD thesis, University of Manchester, UK.

Al Shawa, B (2021) Achieving the climate change targets for the global buildings sector: a techno-socioeconomic pathway. PhD thesis, University of Bath, UK.

Al-Ghamdi, S G (2015) Advancing green building rating systems using life-cycle assessment. PhD thesis, University of Pittsburgh, USA.

Al-Hashim, A; Benkari, N and Al-Saadi, S (2024) Evaluating the sustainable features of vernacular architecture in hot-arid regions: field surveys and analysis in two vernacular houses in Al Batinah region (Oman). Architectural Engineering and Design Management, 20(5), pp. 1118-1140. ISSN 1745-2007

Al-Saeed, Y W M (2018) Towards developing a sustainability assessment framework for residential buildings in Iraq. PhD thesis, Coventry University, UK.

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

Alattyih, W H (2015) Value creation and risk assessment for green building design in Saudi Arabia. PhD thesis, University of Liverpool, UK.

Alaux, N; Kulmer, V; Vogel, J and Passer, A (2025) Preserving buildings: Emission reductions from circular economy strategies in Austria. Buildings & Cities, 6(1), pp. 881-898. ISSN 2632-6655

Alencastro, J; Fuertes, A and de Wilde, P (2020) Quality management in UK social housing projects: Addressing thermal performance. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Alencastro, J; Fuertes, A and de Wilde, P (2024) Investigating the influence of quality management on building thermal performance. Engineering, Construction and Architectural Management, 31(8), pp. 3356-3376. ISSN 0969-9988

Alhamami, A (2021) Standardized qualification framework for achieving energy efficiency training for BIM. PhD thesis, Cardiff University, UK.

Alharbi, E A and Alsehaimi, A (2025) Machine learning model to predict the cooling load of mosque buildings during the design stage. International Journal of Construction Management, 25(8), pp. 965-979. ISSN 1562-3599

Alhusban, A A and Almshaqbeh, S N (2024) Delivering an inclusive built environment for physically disabled people in public universities (Jordan as a case study). Journal of Engineering, Design and Technology, 22(6), pp. 1980-1998. ISSN 1726-0531

Ali, A B M (2019) A composite index for enhancing sustainability within public housing projects in Libya. PhD thesis, University of Salford, UK.

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Ali, N (2018) A framework for designing energy efficient dwellings satisfying socio-cultural needs in hot climates. PhD thesis, De Montfort University, UK.

Alkenaidari, A A (2019) Moving toward energy efficient buildings: A growing economic challenge for Saudi Arabia. PhD thesis, University of Cincinnati, USA.

Almufarrej, A M and Erfani, T (2023) Climate, buildings' envelope design and energy patterns: Improving energy performance of new buildings in Kuwait. Engineering, Construction and Architectural Management, 30(1), pp. 172-188. ISSN 0969-9988

Almås, A J; Lisø, K R; Hygen, H O; Øyen, C F and Thue, J V (2011) An approach to impact assessments of buildings in a changing climate. Building Research & Information, 39(3), pp. 227-238. ISSN 0961-3218

Alothaimeen, I (2018) Multi-objective optimization for LEED: New construction using genetic algorithms. PhD thesis, Illinois Institute of Technology, USA.

Alsharif, M A (2017) Improving sustainability on university campuses in Saudi Arabia: An assessment of organisational and decision-related opportunities and barriers. PhD thesis, University of Reading, UK.

Alsyouf, L; Al Harbat, R; Ma'bdeh, S N and Mushtaha, E S N (2026) Economic feasibility of low-impact retrofit strategies for enhancing energy efficiency in residential townhouses: A case study of sharjah. Construction Economics and Building, 26(1), ISSN 2204-9029

Altomonte, S; Schiavon, S; Kent, M G and Brager, G (2019) Indoor environmental quality and occupant satisfaction in green-certified buildings. Building Research & Information, 47(3), pp. 255-274. ISSN 0961-3218

Alves, J. L.; Almeida Filho, A. T. D.; Bradaschia, F. and Palha, R. P. (2026) Solarisbim.AI: Smart sustainable building planning with BIM-based solar-production estimation using machine-learning radiation forecasts. Journal of Construction Engineering and Management, 152(6): 04026076, ISSN 0733-9364

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(3), pp. 290-303. ISSN 2044-124X

Alwan, Z; Greenwood, D and Gledson, B (2015) Rapid LEED evaluation performed with BIM-based sustainability analysis on a virtual construction project. Construction Innovation, 15(2), pp. 134-150. ISSN 1471-4175

Alzaed, A (2012) User centered passive building design. PhD thesis, University of Liverpool, UK.

Alzaed, A and Boussabaine, A H (2012) A conceptual model for user-centred passive building design. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Amirkhani, S (2022) Minimum energy efficiency standard (MEES) requirements and the impact on the UK hotel buildings stock. PhD thesis, University of West London, UK.

Amorocho, J A P and Hartmann, T (2020) Decision-making process to select energy-efficient renovation alternatives for residential buildings: Two case studies. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Anderson, B (2023) A residential emissions-based carbon levy: City and neighbourhood consequences. Buildings & Cities, 4(1), pp. 545-564. ISSN 2632-6655

Anjomshoa, E (2025) The application of building information modeling (BIM) system in the smartification of green and sustainable buildings. Engineering, Construction and Architectural Management, 32(8), pp. 5194-5227. ISSN 0969-9988

Ansari, S (2020) Investigating the energy performance of a multiuse venue building. EngD thesis, University of Reading, UK.

Anugwo, I C; Appau, M W; Simpeh, F and Attakora-Amaniampong, E (2025) Critical drivers of changes in energy-saving behaviours in student housing in Northern Ghana. Journal of Engineering, Design and Technology, 23(6), pp. 2023-2041. ISSN 1726-0531

Anund Vogel, J (2020) Incentivising Innovation in the Swedish Construction Industry. PhD thesis, KTH Royal Institute of Technology, Sweden.

Arida, M A (2024) Enhancing thermal comfort in commercial buildings: Contributions of machine learning algorithms for optimizing predictive thermal comfort indices. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Arif, M; Egbu, C; Haleem, A; Kulonda, D and Khalfan, M (2009) State of green construction in India: Drivers and challenges. Journal of Engineering, Design and Technology, 7(2), pp. 223-234. ISSN 1726-0531

Arif, M; Syal, M and Hightower, R (2013) Investigating the green leadership in energy and environmental design (LEED) servicescape scale in Brazil. Construction Innovation, 13(3), pp. 242-265. ISSN 1471-4175

Armitage, P; Godoy-Shimizu, D; Steemers, K and Chenvidyakarn, T (2015) Using display energy certificates to quantify public sector office energy consumption. Building Research & Information, 43(6), pp. 691-709. ISSN 0961-3218

Asghari, V; Wang, Y; Biglari, A J; Hsu, S C and Tang, P (2022) Reinforcement learning in construction engineering and management: A review. Journal of Construction Engineering and Management, 148(11): 03122009, ISSN 0733-9364

Ashuri, B; Wang, J; Shahandashti, M and Baek, M (2019) A data envelopment analysis (DEA) model for building energy benchmarking. Journal of Engineering, Design and Technology, 17(4), pp. 747-768. ISSN 1726-0531

Asli, R A; Wedawatta, G; Hedges, P and Park, K (2016) Building environmental assessment scheme for residential building in Brunei. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Atkins, R and Emmanuel, R (2014) Could refurbishment of "traditional" buildings reducecarbon emissions? Built Environment Project and Asset Management, 4(3), pp. 221-237. ISSN 2044-124X

Atkinson, J G B (2008) Market influences on low carbon energy designs in buildings. EngD thesis, University of Surrey, UK.

Atmaca, N (2017) Life-cycle assessment of post-disaster temporary housing. Building Research & Information, 45(5), pp. 524-538. ISSN 0961-3218

Atmo, G and Duffield, C (2014) Improving investment sustainability for PPP power projects in emerging economies: Value for money framework. Built Environment Project and Asset Management, 4(4), pp. 335-351. ISSN 2044-124X

Augenbroe, G; Castro, D and Ramkrishnan, K (2009) Decision model for energy performance improvements in existing buildings. Journal of Engineering, Design and Technology, 7(1), pp. 21-36. ISSN 1726-0531

Avci, A B (2026) Machine learning-based prediction of thermal comfort: Exploring building types, climate, ventilation strategies, and seasonal variations. Building Research & Information, 54(1), pp. 100-117. ISSN 0961-3218

Avetisyan, H G (2013) Sustainable infrastructure modeling and policy analyses: Construction, energy and transportation industries. PhD thesis, University of Maryland, College Park, USA.

Awawdeh, S A (2010) The potential of building regulations to improve the energy efficiency of high-rise residential buildings in the Gulf Countries. PhD thesis, Queen's University Belfast, UK.

Axon, C J; Bright, S J; Dixon, T J; Janda, K B and Kolokotroni, M (2012) Building communities: Reducing energy use in tenanted commercial property. Building Research & Information, 40(4), pp. 461-472. ISSN 0961-3218

Aydın, D and Mıhlayanlar, E (2024) Determination of the significance of project delivery attributes (PDAs) on sustainable projects in Turkey. Journal of Engineering, Design and Technology, 22(5), pp. 1682-1703. ISSN 1726-0531

Aye, L; Bamford, N; Charters, B and Robinson, J (2000) Environmentally sustainable development: A life-cycle costing approach for a commercial office building in Melbourne, Australia. Construction Management and Economics, 18(8), pp. 927-934. ISSN 01446193

Ayodele, T R (2025) Cost of selected smart building elements and its level of implementation in Abuja. Journal of Financial Management of Property and Construction, 30(2), pp. 335-355. ISSN 1366-4387

Azari Najafabadi, R (2013) An evaluation framework for the integrated design process of sustainable high-performance buildings. PhD thesis, University of Washington, USA.

Baborska-Narozny, M; Bandurski, K and Grudzinska, M (2025) Understanding shading through home-use experience, measurement and modelling. Buildings & Cities, 6(1), pp. 466-489. ISSN 2632-6655

Bacon, M (2014) Occupancy analytics: A new basis for low-energy-low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(1-2), pp. 146-163. ISSN 1745-2007

Badi, S (2017) Public sustainable-energy requirements and innovation in UK PFI school projects. Construction Management and Economics, 35(4), pp. 218-238. ISSN 01446193

Bahrami, S and Zeinali, D (2023) The sustainability challenge of product information quality in the design and construction of facades: Lessons from the grenfell tower fire. Smart and Sustainable Built Environment, 12(3), pp. 488-506. ISSN 2046-6099

Bailey, D (2016) A performance evaluation of mainstream timber framed and traditional masonry housing in the UK. PhD thesis, University of Nottingham, UK.

Bailey, O C (2008) Least-cost energy system design for commercial buildings: The relationship between end-use energy efficiency, distributed generation, and utility energy supply. PhD thesis, Cornell University, USA.

Bamford, N; Charters, W; Lacey, R; Mills, A; Radovic, D; Robinson, J; Williams, P and Yencken, D (1998) Environment and sustainability in commercial office buildings. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Bamgbade, J A; Nawi, M N M; Kamaruddeen, A M; Adeleke, A Q and Salimon, M G (2022) Building sustainability in the construction industry through firm capabilities, technology and business innovativeness: Empirical evidence from Malaysia. International Journal of Construction Management, 22(3), pp. 473-488. ISSN 1562-3599

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(1), pp. 29-45. ISSN 0969-9988

Bao, Qi (2003) Effective energy management during a building's life cycle. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Bapat, H; Sarkar, D and Gujar, R (2021) Selection of sustainable materials for energy savings of infrastructure-transportation project in ahmedabad, India using BIM and FCM. Journal of Construction in Developing Countries, 26(2), pp. 135-161. ISSN 1823-6499

Barbosa, J A; Araújo, C; Mateus, R and Bragança, L (2016) Smart interior design of buildings and its relationship to land use. Architectural Engineering and Design Management, 12(2), pp. 97-106. ISSN 1745-2007

Barrett, M (2009) Forum policy challenges for building stocks. Building Research & Information, 37(2), pp. 201-205. ISSN 0961-3218

Barrows, M; Clevenger, C M; Abdallah, M and Wu, W (2020) Value of certifications when seeking construction employment. International Journal of Construction Education and Research, 16(1), pp. 61-79. ISSN 1557-8771

Bartlett, E and Howard, N (2000) Informing the decision makers on the cost and value of green building. Building Research & Information, 28(5-6), pp. 315-324. ISSN 0961-3218

Basyouni, Y. A.; Shokry, H.; Murata, R. and Mahmoud, H. (2026) Novel development of affordable composite eco-cool roof tiles from waste materials: An experimental study. Architectural Engineering and Design Management, 22(3), pp. 900-925. ISSN 1745-2007

Belusko, M; Timothy, M and Leary, O (2010) Cost analyses of measures to improve residential energy ratings to 6 stars: Playford North development, South Australia. Construction Economics and Building, 10(1-2), pp. 36-47. ISSN 2204-9029

Ben-Alon, L (2020) Natural buildings: Integrating earthen building materials and methods into mainstream construction. PhD thesis, Carnegie Mellon University, USA.

Berawi, M A; Kim, A A; Naomi, F; Basten, V; Miraj, P; Medal, L A and Sari, M (2023) Designing a smart integrated workspace to improve building energy efficiency: An Indonesian case study. International Journal of Construction Management, 23(3), pp. 410-422. ISSN 1562-3599

Bersson, T F (2012) A framework for application of system engineering process models to sustainable design of high performance buildings. PhD thesis, George Washington University, USA.

Beurskens, Pieter Robert (2021) The development of an evaluation method to support circular building design. PhD thesis, University of Twente, Netherlands.

Bevan, W (2016) An investigation of the required skills for the delivery of low and zero carbon buildings within a region. PhD thesis, University of Reading, UK.

Bevan, W; Lu, S L and Sexton, M (2020) Skills required to deliver energy efficient school retrofit buildings. Engineering, Construction and Architectural Management, 27(10), pp. 3051-3073. ISSN 0969-9988

Bhuiyan, S I; Jones, K and Wanigarathna, N (2015) An approach to sustainable refurbishment of existing building. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Bichard, E and Thurairajah, N (2013) Behaviour change strategies for energy efficiency in owner-occupied housing. Construction Innovation, 13(2), pp. 165-185. ISSN 1471-4175

Bidarianzadeh, G R and Fortune, C J (2002) Lean thinking and the delivery of sustainable construction projects. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Bilec, M M (2007) A hybrid life cycle assessment model for construction processes. PhD thesis, University of Pittsburgh, USA.

Bilec, Melissa M (2007) A hybrid life cycle assessment model for construction processess. PhD thesis, University of Pittsburgh, USA.

Birchmore, R C; Berry, T A; Wallis, S L; Tsai, S and Hernandez, G (2023) Thermal performance and indoor air quality in new, medium density houses: auckland, New Zealand. International Journal of Building Pathology and Adaptation, 41(1), pp. 279-300. ISSN 23984708

Birgonul, Z (2021) A receptive-responsive tool for customizing occupant's thermal comfort and maximizing energy efficiency by blending BIM data with real-time information. Smart and Sustainable Built Environment, 10(3), pp. 504-535. ISSN 2046-6099

Birkeland, J L (2014) Positive development and assessment. Smart and Sustainable Built Environment, 3(1), pp. 4-22. ISSN 2046-6099

Birkeland, J L (2015) Prospects for nature in proposals for urban growth. Smart and Sustainable Built Environment, 4(3), pp. 310-314. ISSN 2046-6099

Birkeland, J L (2016) Net positive biophilic urbanism. Smart and Sustainable Built Environment, 5(1), pp. 9-14. ISSN 2046-6099

Blay, K; Agyekum, K and Opoku, A (2019) Actions, attitudes and beliefs of occupants in managing dampness in buildings. International Journal of Building Pathology and Adaptation, 37(1), pp. 42-53. ISSN 23984708

Bollo, C S and Cole, R J (2019) Decoupling climate-policy objectives and mechanisms to reduce fragmentation. Building Research & Information, 47(2), pp. 219-233. ISSN 0961-3218

Bonyad, R; Hamzenejad, M and Khanmohammadi, M (2020) Ranking the regenerative architecture indicators for assessment of research-educational building projects in Tehran, Iran. Smart and Sustainable Built Environment, 9(1), pp. 27-37. ISSN 2046-6099

Bordass, B (2020) Metrics for energy performance in operation: The fallacy of single indicators. Buildings & Cities, 1(1), pp. 260-276. ISSN 2632-6655

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 3: Energy performance of the Probe buildings. Building Research & Information, 29(2), pp. 114-128. ISSN 0961-3218

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 2: Technical performance of the Probe buildings. Building Research & Information, 29(2), pp. 103-113. ISSN 0961-3218

Borrallo-Jiménez, M; Esquivias, P M; Fernández-Agüera, J and LopezDeAsiain, M (2025) Hybrid ventilation in a nearly zero-energy building as a function of users' habits for better indoor air quality and thermal comfort in a warm climate. Building Research & Information, 53(1-2), pp. 77-94. ISSN 0961-3218

Bougrain, F (2012) Energy performance and public private partnership. Built Environment Project and Asset Management, 2(1), pp. 41-55. ISSN 2044-124X

Bourdic, L; Salat, S and Nowacki, C (2012) Assessing cities: A new system of cross-scale spatial indicators. Building Research & Information, 40(5), pp. 592-605. ISSN 0961-3218

Bouwer, K A (2016) Building disappointment: the limits and potential of tort liability for energy efficiency problems in domestic buildings. PhD thesis, University College London, UK.

Bowers, C T (2019) The next generation of residential construction: Adoption of green building programs, environmentally certified wood products and the transparency of environmental friendliness. PhD thesis, University of Washington, USA.

Boyd, N J P (2016) From bicycles to buildings: a SCOT analysis of project level adoption of BIPV. PhD thesis, University of Reading, UK.

Boyd, P and Schweber, L (2018) Unintended consequences: Institutional artefacts, closure mechanisms and the performance gap. Building Research & Information, 46(1), pp. 10-22. ISSN 0961-3218

Božiček, D; Almezeraani, Y and Košir, M (2024) Making sense of LCA results when evaluating multiple building designs: Comparison of interpretation concepts. Building Research & Information, 52(1-2), pp. 129-147. ISSN 0961-3218

Bradley, P (2019) The development of a conceptual framework to help achieve low carbon commercial office buildings in London by 2050. PhD thesis, Ulster University, UK.

Brady, L (2019) An investigation into the management of energy performance for building services systems: design to operation. PhD thesis, Liverpool John Moores University, UK.

Brady, L and Hanmer-Dwight, R (2016) The management and control of energy at the design stage of buildings. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Brager, G; Zhang, H and Arens, E (2015) Evolving opportunities for providing thermal comfort. Building Research & Information, 43(3), pp. 274-287. ISSN 0961-3218

Brauner, M (2020) Developing an optimized sustainability assessment tool for building information modelling (BIM) systems: incorporation of hygrothermal modelling into BIM. PhD thesis, Auckland University of Technology, New Zealand.

Bright, S (2010) Carbon reduction and commercial leases in the UK. International Journal of Law in the Built Environment, 2(3), pp. 218-231. ISSN 1756-1450

Brocklehurst, F; Morgan, E; Greer, K; Wade, J and Killip, G (2021) Domestic retrofit supply chain initiatives and business innovations: An international review. Buildings & Cities, 2(1), pp. 533-549. ISSN 2632-6655

Brown, N; Malmqvist, T and Wintzell, H (2016) Owner organizations' value-creation strategies through environmental certification of buildings. Building Research & Information, 44(8), pp. 863-874. ISSN 0961-3218

Bruce, R D; Gebken, R J and Strong, S D (2009) The impact of the leadership in energy and environmental design accredited professional (LEED-ap) credential on prime/general contractor employees. International Journal of Construction Education and Research, 5(3), pp. 182-196. ISSN 1557-8771

Bruhns, H and Wyatt, P (2011) A data framework for measuring the energy consumption of the non-domestic building stock. Building Research & Information, 39(3), pp. 211-226. ISSN 0961-3218

Bu, S; Shen, G; Anumba, C J; Wong, A K D and Liang, X (2015) Literature review of green retrofit design for commercial buildings with BIM implication. Smart and Sustainable Built Environment, 4(2), pp. 188-214. ISSN 2046-6099

Buckman, A H (2016) An exploration of the applications of increased information availability in smart buildings. PhD thesis, University of Sheffield, UK.

Bui, T T P; MacGregor, C; Wilkinson, S and Domingo, N (2023) Towards zero carbon buildings: Issues and challenges in the New Zealand construction sector. International Journal of Construction Management, 23(15), pp. 2709-2716. ISSN 1562-3599

Bui, T T P; Wilkinson, S; Domingo, N and MacGregor, C (2021) Towards zero carbon building refurbishment: A new conceptual framework for decision support tools. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Bull, R and Janda, K B (2018) Beyond feedback: Introducing the 'engagement gap' in organizational energy management. Building Research & Information, 46(3), pp. 300-315. ISSN 0961-3218

Bulut, M; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2021) Perceived benefits of retrofitted residential secondary glazing: An exploratory Australian study. International Journal of Building Pathology and Adaptation, 39(5), pp. 720-733. ISSN 23984708

Bulut, M B; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2022) Thermal performance of retrofitted secondary glazed windows in residential buildings: two cases from Australia. Smart and Sustainable Built Environment, 11(4), pp. 1182-1192. ISSN 2046-6099

Bunemer, Ricardo (2020) Construction 4.0 proposal for digital technological innovations for the civil construction sector: Case study of a smart house. PhD thesis, Universidade Estadual de Campinas, Brazil.

Burgett, J M and Chini, A R (2013) Effective energy efficiency measures for existing residential homes in the Florida market. International Journal of Construction Education and Research, 9(1), pp. 61-80. ISSN 1557-8771

Burke, R D; Parrish, K and El Asmar, M (2018) Environmental product declarations: Use in the architectural and engineering design process to support sustainable construction. Journal of Construction Engineering and Management, 144(5): 04018026, ISSN 0733-9364

Burman, E (2016) Assessing the operational performance of educational buildings against design expectations: a case study approach. PhD thesis, University College London, UK.

Burton, C A; Ryan, C; Rismanchi, B and Candy, S (2020) Urban shared energy systems and behaviour change: simulating a common pooled resource problem. Smart and Sustainable Built Environment, 9(1), pp. 17-26. ISSN 2046-6099

Buser, M; Carlsson, V and Koch, C (2019) Interactive shaping of expertise: The play between house-owner and SME contractors negotiating renovation. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Busic-Sontic, A (2019) Energy efficiency investments in residential buildings: does personality matter? PhD thesis, University of Cambridge, UK.

Byrd, H; Matthewman, S and Rasheed, E (2022) Air-conditioning in New Zealand: Power and policy. Buildings & Cities, 3(1), pp. 1-9. ISSN 2632-6655

Byrd, R H (1981) The mathematical modelling of the environmental performance of buildings as an aid in the design process. PhD thesis, Aston University, UK.

Caetano, L F; de Souza, H A and Gomes, A P (2022) Effect of the exposed steel structure on the thermal performance of buildings. Architectural Engineering and Design Management, 18(1), pp. 38-55. ISSN 1745-2007

Cai, S and Gou, Z (2023) Synchronization of water-energy consumption in residential and non-residential buildings during COVID-19. Building Research & Information, 51(6), pp. 682-700. ISSN 0961-3218

Calcerano, F; Thravalou, S; Martinelli, L; Alexandrou, K; Artopoulos, G and Gigliarelli, E (2024) Energy and environmental improvement of built heritage: HBIM simulation-based approach applied to nine mediterranean case-studies. Building Research & Information, 52(1-2), pp. 225-247. ISSN 0961-3218

Callaghan, N (2013) Alignment of house buyer and house builder opinions in the delivery of energy efficient homes in Scotland. PhD thesis, Glasgow Caledonian University, UK.

Callaghan, N (2014) House buyers and builders: The "ideal" home in Scotland. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Calvert, J; Price, V; Winch, C; Clarke, L; Sahin-Dikmen, M; Bilodeau, P L and Dionne, E (2026) Climate literacy and labour agency in vocational education and training. Buildings & Cities, 7(1), pp. 378-395. ISSN 2632-6655

Camacho-Montano, S C; Wagner, A; Erhorn-Kluttig, H; Mumovic, D and Summerfield, A (2019) Clearing the air on EU guidance projects for school buildings. Building Research & Information, 47(5), pp. 624-634. ISSN 0961-3218

Campion, N A (2015) Advancing life cycle assessment: Perspectives from the building and healthcare industries. PhD thesis, University of Pittsburgh, USA.

Campos, C R (2023) Simplified Matlab calculation tool for LCA optimization of domestic buildings. PhD thesis, University of Strathclyde, UK.

Camrass, K (2022) Urban regenerative thinking and practice: A systematic literature review. Building Research & Information, 50(3), pp. 339-350. ISSN 0961-3218

Cargnelutti, Dejan (2025) 4IR technologies within germany’s construction sector to meet fire protection standards and international climate objectives: A multiple-case study. PhD thesis, European Institute of Management, Malta.

Carlos, J S (2017) The impact of refurbished windows on Portuguese old school buildings. Architectural Engineering and Design Management, 13(3), pp. 185-201. ISSN 1745-2007

Carpino, C; Loukou, E; Heiselberg, P and Arcuri, N (2020) Energy performance gap of a nearly zero energy building (nZEB) in Denmark: The influence of occupancy modelling. Building Research & Information, 48(8), pp. 899-921. ISSN 0961-3218

Carvalho, J P A (2023) Integration of BIM in building sustainability assessment methods. PhD thesis, Universidade do Minho, Portugal.

Cass, N (2018) Energy-related standards and UK speculative office development. Building Research & Information, 46(6), pp. 615-635. ISSN 0961-3218

Castaño-Rosa, R and Nerweyi, D (2025) Bringing post-occupancy evaluation up front to enhance energy efficiency in residential buildings. Building Research & Information, 53(8), pp. 1075-1091. ISSN 0961-3218

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Cemesova, A (2013) Enhancing BIM-based data transfer to support the design of low energy buildings. PhD thesis, Cardiff University, UK.

Cerić, A and Ivić, I (2025) Communication challenges and blockchain in building energy efficiency retrofits: Croatia case. Engineering, Construction and Architectural Management, 32(1), pp. 1-15. ISSN 0969-9988

Chambers, D (2022) Attuning smart home scripts to household and energy care. Buildings & Cities, 3(1), pp. 663-676. ISSN 2632-6655

Charles, H (2025) Beyond the building: Governance challenges in social housing retrofit. Buildings & Cities, 6(1), pp. 433-449. ISSN 2632-6655

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Chen, X (2019) Developing a third party investment partnership framework to encourage low carbon building projects in China. PhD thesis, Northumbria University, UK.

Chen, Yuxuan (2024) Investigation of faults in air-conditioning systems in commercial buildings: Occurrence, diagnostic validation, and energy impacts. PhD thesis, University of Nebraska - Lincoln, USA.

Chen, Zhanliang (2024) Narrative carpentry: A study on conservation organisations for traditional Chinese timber structures. DDes thesis, Harvard University, USA.

Cheung, C K (2005) CH2 energy harvesting systems: Economic use and efficiency. Construction Economics and Building, 5(2), pp. 20-31. ISSN 2204-9029

Chin, J. Y.; Ng, C. T.; Sa'ari, R.; Ng, H. S. and Thong, J. W. (2026) Energy retrofitting by using building information modelling-based energy model. International Journal of Building Pathology and Adaptation, 44(4), pp. 1062-1097. ISSN 2398-4708

Choi, K; Son, K; Woods, P and Park, Y J (2012) LEED public transportation accessibility and its economic implications. Journal of Construction Engineering and Management, 138(9), pp. 1095-1102. ISSN 0733-9364

Christen, M W (2018) The consideration of energy efficiency in the strategic planning of refurbishment in building portfolios. DSc thesis, ETH Zürich, Switzerland.

Christensen, T H; Gram-Hanssen, K; De Best-Waldhober, M and Adjei, A (2014) Energy retrofits of Danish homes: Is the energy performance certificate useful? Building Research & Information, 42(4), pp. 489-500. ISSN 0961-3218

Christina, S; Dainty, A; Daniels, K and Waterson, P (2014) How organisational behaviour and attitudes can impact building energy use in the UK retail environment: A theoretical framework. Architectural Engineering and Design Management, 10(1-2), pp. 164-179. ISSN 1745-2007

Chunekar, A and Sreenivas, A (2019) Towards an understanding of residential electricity consumption in India. Building Research & Information, 47(1), pp. 75-90. ISSN 0961-3218

Cirrincione, Laura (2021) Simulation and experimental methods for improving energy efficiency, environmental performance and resilience of single and clustered groups of buildings. PhD thesis, Università degli Studi di Palermo, Italy.

Clarke, L; Gleeson, C and Winch, C (2016) What kind of expertise is needed for low energy construction? In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Clarke, L; Sahin-Dikmen, M and Winch, C (2020) Transforming vocational education and training for nearly zero-energy building. Buildings & Cities, 1(1), pp. 650-661. ISSN 2632-6655

Clegg, P (2012) A practitioner's view of the 'regenerative paradigm'. Building Research & Information, 40(3), pp. 365-368. ISSN 0961-3218

Clevenger, C M and Haymaker, J R (2012) The value of design strategies applied to energy efficiency. Smart and Sustainable Built Environment, 1(3), pp. 222-240. ISSN 2046-6099

Cohen, R and Bordass, B (2015) Mandating transparency about building energy performance in use. Building Research & Information, 43(4), pp. 534-552. ISSN 0961-3218

Cole, R J (2012) Transitioning from green to regenerative design. Building Research & Information, 40(1), pp. 39-53. ISSN 0961-3218

Cole, R J; Brown, Z and McKay, S (2010) Building human agency: A timely manifesto. Building Research & Information, 38(3), pp. 339-350. ISSN 0961-3218

Cole, R J; Busby, P; Guenther, R; Briney, L; Blaviesciunaite, A and Alencar, T (2012) A regenerative design framework: Setting new aspirations and initiating new discussions. Building Research & Information, 40(1), pp. 95-111. ISSN 0961-3218

Cole, R J; Oliver, A and Robinson, J (2013) Regenerative design, socio-ecological systems and co-evolution. Building Research & Information, 41(2), pp. 237-247. ISSN 0961-3218

Coleman, M J; Irvine, K N; Lemon, M and Shao, L (2013) Promoting behaviour change through personalized energy feedback in offices. Building Research & Information, 41(6), pp. 637-651. ISSN 0961-3218

Conejos, S; Langston, C; Chan, E H W and Chew, M Y L (2016) Governance of heritage buildings: Australian regulatory barriers to adaptive reuse. Building Research & Information, 44(5-6), pp. 507-519. ISSN 0961-3218

Conradie, D; van Reenen, T and Bole, S (2018) Degree-day building energy reference map for South Africa. Building Research & Information, 46(2), pp. 191-16. ISSN 0961-3218

Cooper, I (2012) Winning hearts and minds or evidence-driven: Which trajectory for regenerative design? Building Research & Information, 40(3), pp. 357-360. ISSN 0961-3218

Cozens, P; Waters, J and Neale, R (2002) A virtual reality approach to personal safety and the design of built environment facilities. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Crawford, R H (2005) Validation of the use of input-output data for embodied energy analysis of the Australian construction industry. Journal of Construction Research, 6(1), pp. 71-90. ISSN 1609-9451

Crawley, J; McKenna, E; Gori, V and Oreszczyn, T (2020) Creating domestic building thermal performance ratings using smart meter data. Buildings & Cities, 1(1), pp. 1-13. ISSN 2632-6655

Crosbie, T and Baker, K (2010) Energy-efficiency interventions in housing: Learning from the inhabitants. Building Research & Information, 38(1), pp. 70-79. ISSN 0961-3218

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Cruz Rios, F; Grau, D and Bilec, M (2021) Barriers and enablers to circular building design in the US: An empirical study. Journal of Construction Engineering and Management, 147(10): 04021117, ISSN 0733-9364

Cuce, A P M (2016) Innovative heating, cooling and ventilation technologies for low-carbon buildings. PhD thesis, University of Nottingham, UK.

Cândido, C; Lamberts, R; De Dear, R; Bittencourt, L and De Vecchi, R (2011) Towards a Brazilian standard for naturally ventilated buildings: Guidelines for thermal and air movement acceptability. Building Research & Information, 39(2), pp. 145-153. ISSN 0961-3218

D'Orazio, M; Bernardini, G and Di Giuseppe, E (2024) Improving sustainable management of university buildings based on occupancy data. Journal of Construction Engineering and Management, 150(1): 04023154, ISSN 0733-9364

Da Silva, N A F (2015) Building certification schemes and the quality of indoor environment. PhD thesis, National University of Singapore, Singapore.

Dadzie, J; Runeson, G and Ding, G (2020) Assessing determinants of sustainable upgrade of existing buildings: The case of sustainable technologies for energy efficiency. Journal of Engineering, Design and Technology, 18(1), pp. 270-292. ISSN 1726-0531

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

Dahlan, N D; Ghaffarianhoseini, A and Hassan, N (2022) Sensory and physiological assessment of spatial transient thermal environment changes at a tropical university campus. Smart and Sustainable Built Environment, 11(3), pp. 516-531. ISSN 2046-6099

Darby, S (2010) Smart metering: What potential for householder engagement? Building Research & Information, 38(5), pp. 442-457. ISSN 0961-3218

Davies, P J; Emmitt, S and Firth, S K (2013) On-site energy management challenges and opportunities: A contractor's perspective. Building Research & Information, 41(4), pp. 450-468. ISSN 0961-3218

De Toldi, T; Craig, S and Sushama, L (2022) Internal thermal mass for passive cooling and ventilation: Adaptive comfort limits, ideal quantities, embodied carbon. Buildings & Cities, 3(1), pp. 42-67. ISSN 2632-6655

De Wilde, P J C J (2004) Computational support for the selection of energy saving building components. PhD thesis, Delft University of Technology, Netherlands.

Debrah, C; Chan, A P C; Darko, A; Akowuah, E; Amudjie, J; Asare, K A B and Ghansah, F A (2025) A bibliometrix-based scientometric-systematic analysis and visualization of the global outlook on post-occupancy evaluation of green building. Building Research & Information, 53(8), pp. 1058-1074. ISSN 0961-3218

Delgado, L; Shealy, T; Garvin, M and Pearce, A (2018) Framing energy efficiency with payback period: Empirical study to increase energy consideration during facility procurement processes. Journal of Construction Engineering and Management, 144(5): 04018027, ISSN 0733-9364

Dell'Anna, F; Bottero, M; Becchio, C; Corgnati, S P and Mondini, G (2020) Designing a decision support system to evaluate the environmental and extra-economic performances of a nearly zero-energy building. Smart and Sustainable Built Environment, 9(4), pp. 413-442. ISSN 2046-6099

Dessouky, N; Wheeler, S and Salama, A M (2024) Including local actors' perspective in neighborhood sustainability assessment: Evidence from Dubai's sustainable city. Smart and Sustainable Built Environment, 13(5), pp. 1117-1133. ISSN 2046-6099

Dewlaney, K S and Hallowell, M (2012) Prevention through design and construction safety management strategies for high performance sustainable building construction. Construction Management and Economics, 30(2), pp. 165-177. ISSN 1466433X

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Diaz Schery, C. A.; Caiado, R. G. G.; Ivson, P.; Santos, R. S. and Thadeu Corseuil, E. (2026) An integrative framework for BIM, digital twin and generative AI convergence in construction: A multi-dimensional analysis of synergies and enabling factors. Smart and Sustainable Built Environment, pp. 1-39. ISSN 2046-6099

Dimitrov, D S (2024) The new work of building operations in the digital age: The impact of IoT and digital twins on facility management and operational practices. PhD thesis, University of Washington, USA.

Ding, G (2013) Demolish or refurbish: environmental benefits of housing conservation. Construction Economics and Building, 13(2), pp. 18-34. ISSN 2204-9029

Ding, G K C (2007) The evaluation of environmentally sustainable residential development using a building sustainability index. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Ding, G K C (2007) Life cycle energy assessment of Australian secondary schools. Building Research & Information, 35(5), pp. 487-500. ISSN 0961-3218

Dion, H; Evans, M and Farrell, P (2023) Hospitals management transformative initiatives; towards energy efficiency and environmental sustainability in healthcare facilities. Journal of Engineering, Design and Technology, 21(2), pp. 552-584. ISSN 1726-0531

Djebbar, K E B and Mokhtari, A (2025) Evaluation of the level of awareness of the inhabitants on the importance of the energy retrofitting of buildings: Case study of Tlemcen (Algeria). International Journal of Building Pathology and Adaptation, 43(2), pp. 209-256. ISSN 2398-4708

Doczy, R (2018) Risk-benefit analysis and optimization of LEED-certified school buildings design and construction: Statisitical and machine learning approaches. PhD thesis, Florida State University, USA.

Domínguez-Amarillo, S; Fernández-Agüera, J; Peacock, A and Acosta, I (2020) Energy related practices in mediterranean low-income housing. Building Research & Information, 48(1), pp. 34-52. ISSN 0961-3218

Dong, H (2024) Impact of sensing and occupancy parameters to achieve comfort and demand side management in buildings. PhD thesis, Michigan State University, USA.

Donn, M; Selkowitz, S and Bordass, B (2012) The building performance sketch. Building Research & Information, 40(2), pp. 186-208. ISSN 0961-3218

Dossick, C; Osburn, L and Neff, G (2025) Innovation through practice: The messy work of making technology useful for architecture, engineering and construction teams. Engineering, Construction and Architectural Management, 32(7), pp. 4887-4899. ISSN 0969-9988

Driza, P J N and Park, N K (2014) Occupant satisfaction in LEED-certified higher education buildings. Smart and Sustainable Built Environment, 3(3), pp. 223-236. ISSN 2046-6099

Drummond, P and Ekins, P (2016) Reducing CO2 emissions from residential energy use. Building Research & Information, 44(5-6), pp. 585-603. ISSN 0961-3218

Du, H; Han, Q and De Vries, B (2025) The effects of social influence on low-cost and high-cost household energy-efficient product adoption: A case study in wuhan. Smart and Sustainable Built Environment, 14(6), pp. 1908-1926. ISSN 2046-6099

Du Plessis, C (2012) Towards a regenerative paradigm for the built environment. Building Research & Information, 40(1), pp. 7-22. ISSN 0961-3218

Duckles, B M (2009) The green building industry in California: From ideals to buildings. PhD thesis, University of Arizona, USA.

Duwebi, N; Gorse, C; Sturges, J and Bates, M (2017) Reporting corporate sustainability and the challenges of political rhetoric. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ebbert, T (2010) Re-face: Refurbishment strategies for the technical improvement of office façades. PhD thesis, Delft University of Technology, Netherlands.

Eberhardt, L C M; Birgisdóttir, H and Birkved, M (2019) Life cycle assessment of a Danish office building designed for disassembly. Building Research & Information, 47(6), pp. 666-680. ISSN 0961-3218

Ebrahimigharehbaghi, S; Qian, Q K; de Vries, G and Visscher, H J (2022) Identification of the behavioural factors in the decision-making processes of the energy efficiency renovations: Dutch homeowners. Building Research & Information, 50(4), pp. 369-393. ISSN 0961-3218

Edirisinghe, R; London, K A; Kalutara, P and Aranda-Mena, G (2017) Building information modelling for facility management: Are we there yet? Engineering, Construction and Architectural Management, 24(6), pp. 1119-1154. ISSN 0969-9988

Egwim, C N; Alaka, H; Egunjobi, O O; Gomes, A and Mporas, I (2024) Comparison of machine learning algorithms for evaluating building energy efficiency using big data analytics. Journal of Engineering, Design and Technology, 22(4), pp. 1325-1350. ISSN 1726-0531

Eisenberg, D A (2016) Transforming building regulatory systems to address climate change. Building Research & Information, 44(5-6), pp. 468-473. ISSN 0961-3218

Eisenstein, W; Fuertes, G; Kaam, S; Seigel, K; Arens, E and Mozingo, L (2017) Climate co-benefits of green building standards: Water, waste and transportation. Building Research & Information, 45(8), pp. 828-844. ISSN 0961-3218

Ejidike, C C; Mewomo, M C; Olawumi, T O; Wang, S and Buniya, M K (2025) Barriers to the adoption of smart building technology in developing countries: An empirical survey. Journal of Construction Engineering and Management, 151(6): 04025067, ISSN 0733-9364

Eker, S; Zimmermann, N; Carnohan, S and Davies, M (2018) Participatory system dynamics modelling for housing, energy and wellbeing interactions. Building Research & Information, 46(7), pp. 738-754. ISSN 0961-3218

Ekundayo, D; Babatunde, S O; Ekundayo, A; Perera, S and Udeaja, C (2019) Life cycle carbon emissions and comparative evaluation of selected open source UK embodied carbon counting tools. Construction Economics and Building, 19(2), pp. 220-242. ISSN 2204-9029

Ekung, S; Odesola, I A and Adewuyi, T (2022) Green cost premium for attaining energy-efficiency rating in Nigeria's hot-humid residential buildings. International Journal of Building Pathology and Adaptation, 40(2), pp. 248-268. ISSN 23984708

El Hawary, M and Marzouk, M (2023) Predicting buildings life cycle sustainability behaviour using system dynamics. Architectural Engineering and Design Management, 19(4), pp. 323-339. ISSN 1745-2007

El-Mahdy, D and Ali, M (2024) Assessing the solar radiation performance of self-shaded 3D-printed clay-based façades. Architectural Engineering and Design Management, 20(2), pp. 249-268. ISSN 1745-2007

El-Sayegh, S M; Basamji, M; Haj Ahmad, A and Zarif, N (2021) Key contractor selection criteria for green construction projects in the UAE. International Journal of Construction Management, 21(12), pp. 1240-1250. ISSN 1562-3599

El-khawas, I N (1997) The optimal design of buildings: A life-cycle approach to energy efficiency. PhD thesis, Ohio State University, USA.

Elmualim, A; Czwakiel, A; Valle, R; Ludlow, G and Shah, S (2009) The practice of sustainable facilities management: Design sentiments and the knowledge chasm. Architectural Engineering and Design Management, 5(1-2), pp. 91-102. ISSN 1745-2007

Elshaboury, N; Mohammed Abdelkader, E; Al-Sakkaf, A and Bagchi, A (2025) A deep convolutional neural network for predicting electricity consumption at grey nuns building in Canada. Construction Innovation, 25(2), pp. 270-289. ISSN 1471-4175

Elsheikh, A; Motawa, I and Diab, E (2023) Multi-objective genetic algorithm optimization model for energy efficiency of residential building envelope under different climatic conditions in Egypt. International Journal of Construction Management, 23(7), pp. 1244-1253. ISSN 1562-3599

Enshassi, A; Ayash, A and Mohamed, S (2018) Factors driving contractors to implement energy management strategies in construction projects. Journal of Financial Management of Property and Construction, 23(3), pp. 295-311. ISSN 1366-4387

Enshassi, A; Ayash, A and Mohamed, S (2018) Key barriers to the implementation of energy-management strategies in building construction projects. International Journal of Building Pathology and Adaptation, 36(1), pp. 15-40. ISSN 23984708

Enshassi, A; Ayash, A and Mohamed, S (2019) Energy management application in construction projects in the Gaza Strip, Palestine. Journal of Construction in Developing Countries, 24(1), pp. 1-21. ISSN 1823-6499

Eriksson, P; Milić, V and Brostrom, T (2020) Balancing preservation and energy efficiency in building stocks. International Journal of Building Pathology and Adaptation, 38(2), pp. 356-373. ISSN 23984708

Eslamirad, N; Malekpour Kolbadinejad, S; Mahdavinejad, M and Mehranrad, M (2020) Thermal comfort prediction by applying supervised machine learning in green sidewalks of Tehran. Smart and Sustainable Built Environment, 9(4), pp. 361-374. ISSN 2046-6099

Fahrich, R; Schumann, L; Kremser, L; Schmitt, L and Kriegel, M (2025) Building energy efficiency assessment considering IEQ and sustainability certification data for German office buildings. Building Research & Information, 53(7), pp. 912-928. ISSN 0961-3218

Faris, H M A (2020) Improving project collaboration to minimise the energy performance gap in residential construction: case study of Kurdistan. PhD thesis, University of Portsmouth, UK.

Farzaneh, A (2019) Development of BIM-BEM framework to support the design process. DEng thesis, Ecole de Technologie Superieure, Canada.

Fasna, M F F and Gunatilake, S (2020) Overcoming barriers for building energy efficiency retrofits: Insights from hotel retrofits in Sri Lanka. Built Environment Project and Asset Management, 10(2), pp. 277-295. ISSN 2044-124X

Fay, R; Treloar, G and Iyer-Raniga, U (2000) Life-cycle energy analysis of buildings: A case study. Building Research & Information, 28(1), pp. 31-41. ISSN 0961-3218

Fedoruk, L E; Cole, R J; Robinson, J B and Cayuela, A (2015) Learning from failure: Understanding the anticipated-achieved building energy performance gap. Building Research & Information, 43(6), pp. 750-763. ISSN 0961-3218

Fee, S T (2005) Sustainable construction practices: Contractors' perceptions of awareness and participation. PhD thesis, Indiana State University, USA.

Feng, H; Kassem, M; Greenwood, D and Doukari, O (2023) Whole building life cycle assessment at the design stage: A bim-based framework using environmental product declaration. International Journal of Building Pathology and Adaptation, 41(1), pp. 109-142. ISSN 23984708

Fennell, P; Ruyssevelt, P and Smith, A Z P (2016) Financial viability of school retrofit projects for clients and ESCOs. Building Research & Information, 44(8), pp. 889-11. ISSN 0961-3218

Fernandes, Luciana Oliveira (2015) Procedure for retrofit of the heat power performance of educational buildings by applying passive strategies conditioning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Fernández-Sols, J L; Pathak, R; Lavy, S; Beltrán, L O; Son, K and Kim, K (2011) Framework for selecting performance assessment tools for achieving LEED 3.0 credits. Architectural Engineering and Design Management, 7(4), pp. 236-250. ISSN 1745-2007

Ferreira, A C F; Carmo, C S T; Cruz, A S and Faisca, R G (2025) A case study to explore the synergy between HBIM and BEM for maintenance of historical buildings. International Journal of Building Pathology and Adaptation, 43(3), pp. 302-320. ISSN 2398-4708

Ferreira, M; Almeida, M; Rodrigues, A and Silva, S M (2016) Comparing cost-optimal and net-zero energy targets in building retrofit. Building Research & Information, 44(2), pp. 188-201. ISSN 0961-3218

Figliola, A; Canducci, A; Calcagni, L and Battisti, A (2024) Passive strategies for climate change mitigation in architectural heritage: the case study of Santa Maria in Trastevere Basilica, Rome. Building Research & Information, 52(7), pp. 725-747. ISSN 0961-3218

Firth, S K; Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(1), pp. 25-41. ISSN 0961-3218

Fischer, J (2010) Translating zero carbon into building design regulation, theories and practices. PhD thesis, University of Manchester, UK.

Fletcher, S L (2001) Developing disassembly strategies for buildings to reduce the lifetime environmental impacts by applying a systems approach. PhD thesis, University of Sheffield, UK.

Fonte, G C A (2011) Energy management reduces Great Pyramid build effort by more than 98%. Journal of Construction Engineering and Management, 137(12), pp. 1195-1204. ISSN 0733-9364

Fortunato Iii, B R; Hallowell, M R; Behm, M and Dewlaney, K (2012) Identification of safety risks for high-performance sustainable construction projects. Journal of Construction Engineering and Management, 138(4), pp. 499-508. ISSN 0733-9364

Foster, J A and Poston, A (2024) Occupant experience of domestic kitchen environments in low-energy social and affordable housing in Scotland. Building Research & Information, 52(7), pp. 799-816. ISSN 0961-3218

Foster, M E (1997) Energy conservation in the United Kingdom housing sector: An exploration of technical and social issues. PhD thesis, Open University, UK.

Foster, S (2021) Improved thermal comfort for Hawai'i's elementary schools: Designing an educational building for thermal comfort using passive design techniques in the hot and humid climate. DArch thesis, University of Hawai'i at Manoa, USA.

Fouchal, F; Ellis, K; Hassan, T and Firth, S (2013) ICT-enabled energy efficiency: a lens onto practices of other sectors. Smart and Sustainable Built Environment, 2(2), pp. 158-178. ISSN 2046-6099

Fouiteh, I; Santelices, J D C; Susini, A and Patel, M K (2024) Operationalising building-related energy sufficiency measures in SMEs. Buildings & Cities, 5(1), pp. 368-387. ISSN 2632-6655

Foulds, C (2013) Practices and technological change: the unintended consequences of low energy dwelling design. PhD thesis, University of East Anglia, UK.

Francart, N; Höjer, M; Mjörnell, K; Orahim, A S; von Platten, J and Malmqvist, T (2020) Sharing indoor space: Stakeholders' perspectives and energy metrics. Buildings & Cities, 1(1), pp. 70-85. ISSN 2632-6655

Friedman, A and Cammalleri, V (1996) Advanced wood-frame construction details in Canada. Building Research & Information, 24(5), pp. 270-278. ISSN 0961-3218

Friedman, A and Cammalleri, V (1996) The impact of R-2000 building technology on Canadian housing. Building Research & Information, 24(1), pp. 5-13. ISSN 0961-3218

Frischknecht, R; Alig, M; Nathani, C; Hellmüller, P and Stolz, P (2020) Carbon footprints and reduction requirements: The Swiss real estate sector. Buildings & Cities, 1(1), pp. 325-336. ISSN 2632-6655

Fuerst, F; Van De Wetering, J and Wyatt, P (2013) Is intrinsic energy efficiency reflected in the pricing of office leases? Building Research & Information, 41(4), pp. 373-383. ISSN 0961-3218

Futcher, J; Mills, G and Emmanuel, R (2018) Interdependent energy relationships between buildings at the street scale. Building Research & Information, 46(8), pp. 829-844. ISSN 0961-3218

Gabe, J (2016) Successful greenhouse gas mitigation in existing Australian office buildings. Building Research & Information, 44(2), pp. 160-174. ISSN 0961-3218

Gajaba, P A P Y and Dissanayake, D M P P (2025) Barriers to implement energy efficiency strategies to heating, ventilation, air conditioning of airside system in commercial buildings in Sri Lanka. International Journal of Construction Management, 25(12), pp. 1395-1403. ISSN 1562-3599

Galal Ahmed, K; Hamza, N; Kordi, A O and M. Shareef, O S (2025) Retrofit with residents: Proposed locally responsive participatory method for technical thermal retrofitting of public housing in the United Arab Emirates. Smart and Sustainable Built Environment, 14(4), pp. 1038-1072. ISSN 2046-6099

Gallego Sánchez-Torija, J; García López, C and Fernández Nieto, M A (2024) Energy, water and economic savings by changing habits of users in twelve schools in Spain. Building Research & Information, 52(5), pp. 596-609. ISSN 0961-3218

Galvin, R (2015) Integrating the rebound effect: Accurate predictors for upgrading domestic heating. Building Research & Information, 43(6), pp. 710-722. ISSN 0961-3218

Galvin, R (2023) How prebound effects compromise the market premium for energy efficiency in German house sales. Building Research & Information, 51(5), pp. 501-517. ISSN 0961-3218

Gana, V F G (2018) Soft Landings based Design Management as a tool to enhance Sustainability: a case study of non-residential buildings in the UK. PhD thesis, University of Kent, UK.

Gana, V F G; Giridharan, R and Watkins, R (2018) Application of soft landings in the design management process of a non-residential building. Architectural Engineering and Design Management, 14(3), pp. 178-193. ISSN 1745-2007

Gann, D M; Wang, Y and Hawkins, R (1998) Do regulations encourage innovation? The case of energy efficiency in housing. Building Research & Information, 26(5), pp. 280-296. ISSN 0961-3218

Gao, J; Ren, H; Ma, X; Cai, W and Shi, Q (2019) A total energy efficiency evaluation framework based on embodied energy for the construction industry and the spatio-temporal evolution analysis. Engineering, Construction and Architectural Management, 26(8), pp. 1652-1671. ISSN 0969-9988

Garcia, R (2018) California energy policy alternatives for commercial buildings to create energy resiliency, reduce carbon emissions, and lessen dependency on electrical utilities for the future California economy. EdD thesis, Brandman University, USA.

Garcia-Holguera, M; Clark, O G; Sprecher, A and Gaskin, S (2016) Ecosystem biomimetics for resource use optimization in buildings. Building Research & Information, 44(3), pp. 263-278. ISSN 0961-3218

Garmston, H; Pan, W and de Wilde, P (2012) Decision-making in façade selection for multi-storey buildings. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Garmston, H M (2017) Decision-making in the selection of retrofit facades for non-domestic buildings. PhD thesis, University of Plymouth, UK.

Georgiadou, M C; Greenwood, D; Schiano-Phan, R and Russo, F (2024) Assessing retrofit policies for fuel-poor homes in London. Buildings & Cities, 5(1), pp. 133-149. ISSN 2632-6655

Gerding, D; Wamelink, H and Leclercq, E (2020) Implementation of circularity in the building process: A case study research into organizing the actor network and decision-making process. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Gerding, D P; Wamelink, H and Leclercq, E M (2021) Implementing circularity in the construction process: A case study examining the reorganization of multi-actor environment and the decision-making process. Construction Management and Economics, 39(7), pp. 617-635. ISSN 01446193

Gerrish, T; Ruikar, K; Cook, M; Johnson, M and Phillip, M (2017) Using BIM capabilities to improve existing building energy modelling practices. Engineering, Construction and Architectural Management, 24(2), pp. 190-208. ISSN 0969-9988

Getvoldsen, K S; Chandragiri, A K; Khalafallah, A M; Belizaire, M; Weirs, J; Raheem, H M J; Gerges, M and Butt, T E (2024) Sustainability’s three principal dimensions versus Climate Change Act 2008: A retrospective numerical modelling. Construction Economics and Building, 24(3), pp. 5-22. ISSN 2204-9029

Ghafoori, M and Abdallah, M (2022) Simulation-based optimization model to minimize equivalent annual cost of existing buildings. Journal of Construction Engineering and Management, 148(2): 04021202, ISSN 0733-9364

Ghanbari, M; Rusch, R and Skitmore, M (2024) BIM-based environmental assessment of residential renovation projects during the operational phase. Architectural Engineering and Design Management, 20(3), pp. 624-635. ISSN 1745-2007

Ghansah, F A; Owusu-Manu, D G; Ayarkwa, J; Darko, A and Edwards, D J (2022) Underlying indicators for measuring smartness of buildings in the construction industry. Smart and Sustainable Built Environment, 11(1), pp. 126-142. ISSN 2046-6099

Ghansah, F A (2025) Digital twins for smart building at the facility management stage: A systematic review of enablers, applications and challenges. Smart and Sustainable Built Environment, 14(4), pp. 1194-1229. ISSN 2046-6099

Gholami Rostam, Mehdi (2024) Energy efficiency assessment in building designs integrating climate resilience and long-term environmental sustainability. PhD thesis, University of New South Wales, Australia.

Giahchy, S; Hosseini, S A; Akhbari, M; Safa, E and Akbarpour, A (2023) A novel mathematical multi-criteria decision-making model for optimizing life cycle energy and cost in construction projects planning. Architectural Engineering and Design Management, 19(2), pp. 200-213. ISSN 1745-2007

Gijsbers, R and Lichtenberg, J (2014) Demand driven selection of adaptable building technologies for flexibility-in-use. Smart and Sustainable Built Environment, 3(3), pp. 237-260. ISSN 2046-6099

Gilbert, M; Barati, K and Shen, X (2025) Parametric analysis and optimisation of design elements impacting thermal loads in residential settings. Built Environment Project and Asset Management, 15(5), pp. 974-987. ISSN 2044-124X

Giles, C; Irizarry, J and Gheisari, M (2010) Does gender make a difference? An analysis of motivational factors in sustainability practice. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gillich, A; Sunikka-Blank, M and Ford, A (2017) Lessons for the UK green deal from the US BBNP. Building Research & Information, 45(4), pp. 384-395. ISSN 0961-3218

Gillich, A; Sunikka-Blank, M and Ford, A (2018) Designing an 'optimal' domestic retrofit programme. Building Research & Information, 46(7), pp. 767-778. ISSN 0961-3218

Gillis III, W L (2013) Development of an integrative commissioning methodology for new-building construction. PhD thesis, Missouri University of Science and Technology, USA.

Gispert, D E; Yitmen, I; Sadri, H and Taheri, A (2025) Development of an ontology-based asset information model for predictive maintenance in building facilities. Smart and Sustainable Built Environment, 14(3), pp. 740-757. ISSN 2046-6099

Gleeson, C P (2016) Residential heat pump installations: The role of vocational education and training. Building Research & Information, 44(4), pp. 394-406. ISSN 0961-3218

Godoy-Shimizu, D; Armitage, P; Steemers, K and Chenvidyakarn, T (2011) Using display energy certificates to quantify schools' energy consumption. Building Research & Information, 39(6), pp. 535-552. ISSN 0961-3218

Godoy-Shimizu, D; Hong, S M; Korolija, I; Schwartz, Y; Mavrogianni, A and Mumovic, D (2022) Pathways to improving the school stock of England towards net zero. Buildings & Cities, 3(1), pp. 939-963. ISSN 2632-6655

Goh C S, R S (2013) The roles of sustainability assessment systems in delivering sustainable construction. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Gokarakonda, S; Shrestha, S; Caleb, P R; Rathi, V; Jain, R; Thomas, S; Topp, K and Niazi, Z (2019) Decoupling in India's building construction sector: Trends, technologies and policies. Building Research & Information, 47(1), pp. 91-107. ISSN 0961-3218

Goncalves Sartori, Thais (2023) Improving whole building life cycle assessment software tools for decision-making. PhD thesis, Queensland University of Technology, Australia.

Gong, Z; Ejohwomu, O; Aminian, E and Abadi, M (2024) Risk analysis of building energy performance gap: Considering project complexity. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

González, J; Da Costa, B B F; Tam, V W Y and Haddad, A (2024) Effects of latitude and building orientation in indoor-illuminance levels towards energy efficiency. International Journal of Construction Management, 24(7), pp. 784-798. ISSN 1562-3599

González-Prieto, D; Fernández-Nava, Y; Marañón, E and Prieto, M M (2021) Environmental life cycle assessment based on the retrofitting of a twentieth-century heritage building in Spain, with electricity decarbonization scenarios. Building Research & Information, 49(8), pp. 859-877. ISSN 0961-3218

Gordo-Gregorio, P; Alavi, H; Edwards, D J; Forcada, N and Guéna, F (2026) An occupant-centric approach on digital twins for building management. Building Research & Information, 54(1), pp. 59-78. ISSN 0961-3218

Gorse, C; Sutton, R; Johnston, D and Miles-Shenton, D (2011) Heat loss through the building fabric: Low carbon construction practice. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Gottsche, J; Kelly, M and Taggart, M (2016) Assessing the impact of energy management initiatives on the energy usage during the construction phase of an educational building project in Ireland. Construction Management and Economics, 34(1), pp. 46-60. ISSN 01446193

Goulden, S; Erell, E; Garb, Y and Pearlmutter, D (2017) Green building standards as socio-technical actors in municipal environmental policy. Building Research & Information, 45(4), pp. 414-425. ISSN 0961-3218

Govertsen, K and Kane, M (2024) Measuring health inequities due to housing characteristics. Buildings & Cities, 5(1), pp. 451-469. ISSN 2632-6655

Graebert, R F (2015) The implementation of building energy management in commercial real estate and impacts on building energy performance. PhD thesis, Stanford University, USA.

Graham, P (2000) Building education for the next industrial revolution: Teaching and learning environmental literacy for the building professions. Construction Management and Economics, 18(8), pp. 917-925. ISSN 01446193

Gram-Hanssen, K; Georg, S; Christiansen, E and Heiselberg, P (2018) What next for energy-related building regulations? The occupancy phase. Building Research & Information, 46(7), pp. 790-803. ISSN 0961-3218

Gram-Hanssen, K; Heidenstrøm, N; Vittersø, G; Madsen, L V and Jacobsen, M H (2017) Selling and installing heat pumps: Influencing household practices. Building Research & Information, 45(4), pp. 359-370. ISSN 0961-3218

Grassie, D; Schwartz, Y; Symonds, P; Korolija, I; Mavrogianni, A and Mumovic, D (2022) Energy retrofit and passive cooling: Overheating and air quality in primary schools. Buildings & Cities, 3(1), pp. 204-225. ISSN 2632-6655

Greer, Fiona Muriel (2021) Life-cycle environmental and economic management of airport infrastructure and operations. PhD thesis, University of California, USA.

Grey Rodriguez, F C (2019) Space-mate: A framework to harmonize occupant well-being and building sustainability. PhD thesis, Stanford University, USA.

Grobler, L J and Singh, V (1999) Research information: The green buildings for Africa programme. Building Research & Information, 27(3), pp. 183-193. ISSN 0961-3218

Guanyu, W; Xiaoxia, L and Gab-Soo, H (2025) Research on the protection of and renewal strategies for historic buildings in the ancient city of liaocheng based on multisource data. Architectural Engineering and Design Management, 21(1), pp. 120-135. ISSN 1745-2007

Guerra-Santin, O and Silvester, S (2017) Development of Dutch occupancy and heating profiles for building simulation. Building Research & Information, 45(4), pp. 396-413. ISSN 0961-3218

Gulbinas, R (2014) Motivating and quantifying energy efficient behavior among commercial building occupants. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Gultekin-Bicer, P; Anumba, C J and Leicht, R M (2018) Advanced energy retrofit projects: Cross-case analysis of integrated system design. International Journal of Construction Management, 18(6), pp. 453-466. ISSN 1562-3599

Gunay, H B; O'Brien, W; Beausoleil-Morrison, I and Huchuk, B (2014) On adaptive occupant-learning window blind and lighting controls. Building Research & Information, 42(6), pp. 739-756. ISSN 0961-3218

Gupta, R; Gregg, M; Manu, S; Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(1), pp. 56-74. ISSN 0961-3218

Gutierres, Henrique Elias Pessoa (2019) Methodological proposal for the evaluation of geomorphological impacts based on the environmental impact studies of the Serro Azul and Igarapeba dams in the state of Pernambuco. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Gyadu-Asiedu, Nana Akua Asabea; Aigbavboa, Clinton and Stephen, Seyi (2026) Nature-based solutions and materials promoting net-zero construction in South Africa: Trends and insights from a bibliometric review. Journal of Construction Business and Management, 8(2), pp. 28-42. ISSN 2521-0165

Gündoğan, H (2021) An exploratory study on features of intelligent office buildings and development of an assessment tool. PhD thesis, Middle East Technical University, Turkey.

Habibi, S (2020) A review of ICT-based applications to monitor environmental parameters. Construction Innovation, 20(1), pp. 112-127. ISSN 1471-4175

Habibi, S (2022) Role of BIM and energy simulation tools in designing zero-net energy homes. Construction Innovation, 22(1), pp. 101-119. ISSN 1471-4175

Hadi, A; Cheung, F; Adjei, S and Dulaimi, A (2023) Evaluation of lean off-site construction literature through the lens of industry 4.0 and 5.0. Journal of Construction Engineering and Management, 149(12): 03123007, ISSN 0733-9364

Hafez, H; El-Mahdy, D and Marsh, A T M (2023) Barriers and enablers for scaled-up adoption of compressed earth blocks in Egypt. Building Research & Information, 51(7), pp. 783-797. ISSN 0961-3218

Hagan, S K (2000) Gaining ground: The new contract between architecture and nature. PhD thesis, University of London, Birkbeck College, UK.

Hajizadeh, S. and Seyis, S. (2026) Multi-climate zone approach to sustainable retrofitting for optimizing energy efficiency and CO2 reduction in Australian detached houses. International Journal of Building Pathology and Adaptation, 44(4), pp. 885-909. ISSN 2398-4708

Halliday, S; Beggs, C and Muneer, T (1999) Is solar air conditioning feasible? Building Research & Information, 27(3), pp. 149-164. ISSN 0961-3218

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hamayat, F.; Ahmad, R. F.; Ghaban, W.; Saeed, F.; Ahmad, J.; Anwar, S. M. and Zubair, S. (2026) Data-driven stnet and stprophet models for secure edge-based indoor air temperature prediction in smart buildings. Building Research & Information, 54(4), pp. 492-509. ISSN 0961-3218

Hamida, A; Alsudairi, A; Alshaibani, K and Alshamrani, O (2021) Environmental impacts cost assessment model of residential building using an artificial neural network. Engineering, Construction and Architectural Management, 28(10), pp. 3190-3215. ISSN 0969-9988

Hamilton, I G; Shipworth, D; Summerfield, A J; Steadman, P; Oreszczyn, T and Lowe, R (2014) Uptake of energy efficiency interventions in English dwellings. Building Research & Information, 42(3), pp. 255-275. ISSN 0961-3218

Hamilton-MacLaren, F; Loveday, D and Mourshed, M (2009) The calculation of embodied energy in new build UK housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Han, Y and Wade, F (2022) Mapping supply chain actors for innovative building retrofit. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Hansen, A R; Gram-Hanssen, K and Knudsen, H N (2018) How building design and technologies influence heat-related habits. Building Research & Information, 46(1), pp. 83-98. ISSN 0961-3218

Hargreaves, T; Wilson, C and Hauxwell-Baldwin, R (2018) Learning to live in a smart home. Building Research & Information, 46(1), pp. 127-139. ISSN 0961-3218

Hariyadi, A; Fukuda, H and Ma, Q (2017) The effectiveness of the parametric design 'sudare' blind as external shading for energy efficiency and visibility quality in Jakarta. Architectural Engineering and Design Management, 13(5), pp. 384-403. ISSN 1745-2007

Hartwig, J and Kockat, J (2016) Macroeconomic effects of energetic building retrofit: Input-output sensitivity analyses. Construction Management and Economics, 34(2), pp. 79-97. ISSN 01446193

Hassan, O A B (2016) Effect of foundation designs of passive house on the thermal bridges at the ground. Journal of Engineering, Design and Technology, 14(3), pp. 602-613.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(4), pp. 835-850.

Hay, R; Samuel, F; Watson, K J and Bradbury, S (2018) Post-occupancy evaluation in architecture: Experiences and perspectives from UK practice. Building Research & Information, 46(6), pp. 698-710. ISSN 0961-3218

He, Q and Ng, S T (2017) Energy-efficient window retrofit for existing high-rise residential buildings with the consideration of mutual shading. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Heffernan, E; Pan, W and Liang, X (2012) Delivering zero carbon homes in the UK. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Heffernan, E E (2015) Delivering zero carbon homes and sustainable communities: The potential of group self-build housing in England. PhD thesis, University of Plymouth, UK.

Henson, L L (1980) Use of the Delphi technique: University community involvement in the creation of a library building program at Florida Institute of Technology. PhD thesis, Florida State University, USA.

Hepner, C M and Boser, R A (2006) Architects' perceptions of LEED indoor environmental quality checklist items on employee productivity. International Journal of Construction Education and Research, 2(3), pp. 193-208. ISSN 1557-8771

Hernandez, P and Kenny, P (2010) Integrating occupant preference and life cycle energy evaluation: A simplified method. Building Research & Information, 38(6), pp. 625-637. ISSN 0961-3218

Heron, E; Bowen, P and Lincoln, D (2005) Vandalism: A product of environmental design? Journal of Financial Management of Property and Construction, 10(3), pp. 181-191. ISSN 1366-4387

Herring, H (2009) National building stocks: Addressing energy consumption or decarbonization? Building Research & Information, 37(2), pp. 192-195. ISSN 0961-3218

Hessami, A R; Faghihi, V; Kim, A and Ford, D N (2020) Evaluating planning strategies for prioritizing projects in sustainability improvement programs. Construction Management and Economics, 38(8), pp. 726-738. ISSN 01446193

Hipwood, T (2022) Adapting owner-occupied dwellings in the UK: Lessons for the future. Buildings & Cities, 3(1), pp. 297-315. ISSN 2632-6655

Hobart, C (2019) Building sustainability assessment schemes: The role of criteria in translating aims into effect. PhD thesis, Anglia Ruskin University, UK.

Hobart, C; Thomson, D; Dainty, A; Fernie, S and Drewniak, D (2015) Closing the energy performance gap in zero carbon homes – pro-active identification, prioritisation and mitigation of causes using fmea. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hofman, P; Wade, F; Webb, J and Groenleer, M (2021) Retrofitting at scale: Comparing transition experiments in Scotland and the Netherlands. Buildings & Cities, 2(1), pp. 637-654. ISSN 2632-6655

Hojem, T S M; Sørensen, K H and Lagesen, V A (2014) Designing a green building: Expanding ambitions through social learning. Building Research & Information, 42(5), pp. 591-601. ISSN 0961-3218

Hollick, F; Humphrey, D; Oreszczyn, T; Elwell, C and Huebner, G (2024) Building energy use in COVID-19 lockdowns: Did much change? Buildings & Cities, 5(1), pp. 182-198. ISSN 2632-6655

Holmes, S H; Phillips, T and Wilson, A (2016) Overheating and passive habitability: Indoor health and heat indices. Building Research & Information, 44(1), pp. 1-19. ISSN 0961-3218

Holmes, S H and Reinhart, C F (2013) Assessing future climate change and energy price scenarios: Institutional building investment. Building Research & Information, 41(2), pp. 209-222. ISSN 0961-3218

Hong, S M; Paterson, G; Mumovic, D and Steadman, P (2014) Improved benchmarking comparability for energy consumption in schools. Building Research & Information, 42(1), pp. 47-61. ISSN 0961-3218

Hopkin, D J (2011) The fire performance of engineered timber products and systems. EngD thesis, Loughborough University, UK.

Horne, R; Maller, C and Dalton, T (2014) Low carbon, water-efficient house retrofits: An emergent niche? Building Research & Information, 42(4), pp. 539-548. ISSN 0961-3218

Horsley, A; France, C and Quatermass, B (2003) Delivering energy efficient buildings: A design procedure to demonstrate environmental and economic benefits. Construction Management and Economics, 21(4), pp. 345-356. ISSN 01446193

Hossain, Y (2017) Energy-efficient homes in Alaska: Historical and contemporary perspectives on adaptation and innovation. PhD thesis, University of Alaska Fairbanks, USA.

Hou, H (2023) Understanding building and urban environment interactions: an integrated framework for building occupancy modelling. PhD thesis, Imperial College London, UK.

Hoxie, C; Berkebile, R and Todd, J A (2012) Stimulating regenerative development through community dialogue. Building Research & Information, 40(1), pp. 65-80. ISSN 0961-3218

Hsu, D (2014) Improving energy benchmarking with self-reported data. Building Research & Information, 42(5), pp. 641-656. ISSN 0961-3218

Hu, M (2023) An evaluation of the retrofit net zero building performances: Life cycle energy, emissions and cost. Building Research & Information, 51(2), pp. 179-191. ISSN 0961-3218

Huang, J; Abadi, M; Manu, P and Cheung, C (2022) The impact of sustainability rating systems on health and safety in building projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(2), pp. 49-64. ISSN 17514304

Huberty, L L (2013) Using leadership in energy and environmental design (LEED) certification to solicit sponsorships: A strategic framework for public sport facility marketers. PhD thesis, University of Minnesota, USA.

Hughes, J O; Pallin, S; Aldykiewicz, A J and Clark, C J (2021) Installation quality framework: Investment return approach for energy savings on building product installation. Journal of Construction Engineering and Management, 147(11): 04021158, ISSN 0733-9364

Hulathdoowage, N D; Karunasena, G; Udawatta, N and Liu, C (2024) Essential parameters in stepwise retrofitting for long-term emission reduction in residential buildings. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Humphreys, M A (2005) Quantifying occupant comfort: Are combined indices of the indoor environment practicable? Building Research & Information, 33(4), pp. 317-325. ISSN 0961-3218

Hussein, E S (2010) Green architecture as an approach for increasing energy efficiency in Egyptian buildings. PhD thesis, Cardiff University, UK.

Huuhka, S (2016) Vacant residential buildings as potential reserves: A geographical and statistical study. Building Research & Information, 44(8), pp. 816-839. ISSN 0961-3218

Huuhka, S; Moisio, M; Salmio, E; Köliö, A and Lahdensivu, J (2023) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings & Cities, 4(1), pp. 212-228. ISSN 2632-6655

Hwang, Y H; Feng, Y and Tan, P Y (2016) Managing deforestation in a tropical compact city (Part B): Urban ecological approaches to landscape design. Smart and Sustainable Built Environment, 5(1), pp. 73-92. ISSN 2046-6099

Högberg, L (2014) Building sustainability: Studies on incentives in construction and management of real estate. PhD thesis, KTH Royal Institute of Technology, Sweden.

Hübner, D.; Moghayedi, A. and Michell, K. (2026) Affordable net-zero carbon housing in the Global South: Pathways towards a resilient built environment. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Hübner, F; Volk, R; Kühlen, A and Schultmann, F (2017) Review of project planning methods for deconstruction projects of buildings. Built Environment Project and Asset Management, 7(2), pp. 212-226. ISSN 2044-124X

Ibbotson, K and Farrell, P (2019) The challenges of prioritising low carbon in public sector flood and coastal erosion risk management (FCERM) construction. International Journal of Building Pathology and Adaptation, 37(5), pp. 615-628. ISSN 23984708

Ikudayisi, A E and Adegun, O B (2025) Pathways for green building acceleration in fast-growing countries: A case study on Nigeria. Built Environment Project and Asset Management, 15(3), pp. 450-466. ISSN 2044-124X

Ingle, A; Moezzi, M; Lutzenhiser, L and Diamond, R (2014) Better home energy audit modelling: Incorporating inhabitant behaviours. Building Research & Information, 42(4), pp. 409-421. ISSN 0961-3218

Isaacs, N and Hills, A (2014) Understanding the newzealand non-domestic building stock. Building Research & Information, 42(1), pp. 95-108. ISSN 0961-3218

Isaacs, N; Saville-Smith, K; Camilleri, M and Burrough, L (2010) Energy in New Zealand houses: Comfort, physics and consumption. Building Research & Information, 38(5), pp. 470-480. ISSN 0961-3218

Ishaak, F F (2025) Improving commercial property price statistics. PhD thesis, Delft University of Technology, Netherlands.

Isiadinso, C; Anumba, C J; El-Rimawi, J and Bhamra, T (2006) Design for deconstruction lessons from the manufacturing industry. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ismaeel, W S E (2019) Systems thinking and modeling for buildings' sustainable site selection. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Ismaeel, W S E (2020) An integrated model for energy-efficient building opening design. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ismaeel, W S E (2022) Sustainable site selection using system dynamics; case study LEED-certified project. Architectural Engineering and Design Management, 18(4), pp. 368-386. ISSN 1745-2007

Ismaeel, W S E; Alamoudy, F O and Sameh, R (2023) How renovation activities may jeopardise indoor air quality: Accounting for short and long-term symptoms of sick building syndrome in educational buildings. Architectural Engineering and Design Management, 19(4), pp. 360-377. ISSN 1745-2007

Ismail, Z A (2020) Planning the maintenance of green building materials for sustainable development: A building information modelling approach. Journal of Financial Management of Property and Construction, 26(1), pp. 141-157. ISSN 1366-4387

Issa, M H; Attalla, M; Rankin, J H and Christian, A J (2011) Energy consumption in conventional, energyretrofitted and green LEED Toronto schools. Construction Management and Economics, 29(4), pp. 383-395. ISSN 1466433X

Jack, R; Loveday, D; Allinson, D and Lomas, K (2018) First evidence for the reliability of building co-heating tests. Building Research & Information, 46(4), pp. 383-401. ISSN 0961-3218

Jacob, J C; Pandit, D and Sen, J (2023) An explorative study on transient cooling pattern and energy efficiency while using micro-zonal occupant-centric control. Architectural Engineering and Design Management, 19(4), pp. 340-359. ISSN 1745-2007

Jacob, J C; Pandit, D and Sen, J (2025) Developing a validated simulation model of micro-zonal air-conditioning to evaluate thermal comfort parameters. Architectural Engineering and Design Management, 21(2), pp. 289-314. ISSN 1745-2007

Jafari, A; Valentin, V and Berrens, R P (2017) Estimating the economic value of energy improvements in U.S. Residential housing. Journal of Construction Engineering and Management, 143(8): 04017048, ISSN 0733-9364

Jain, N R; Rawal, R; Vardhan, V and Dey, S (2021) Performance metrics for room air-conditioners: Energy, comfort and environmental impacts. Buildings & Cities, 2(1), pp. 666-687. ISSN 2632-6655

Jain, Nishesh (2021) Reducing the performance gap using calibrated simulation models. PhD thesis, University College London, UK.

Janda, K B; Bright, S; Patrick, J; Wilkinson, S and Dixon, T J (2016) The evolution of green leases: Towards inter-organizational environmental governance. Building Research & Information, 44(5-6), pp. 660-674. ISSN 0961-3218

Javed, S; Ørnes, I R; Myrup, M and Dokka, T H (2019) Design optimization of the borehole system for a plus-energy kindergarten in Oslo, Norway. Architectural Engineering and Design Management, 15(3), pp. 181-195. ISSN 1745-2007

Jayarathne, T D; De Silva, N and Samarakoon, W K U R M K P K (2024) Adopting smart retrofits: A decision-making model and benchmarking criteria. Built Environment Project and Asset Management, 14(3), pp. 366-383. ISSN 2044-124X

Jayasena, N S; Mallawaarachchi, H and De Silva, L (2020) Environmental sustainability of facilities management: Analytical hierarchy process (AHP) based model for evaluation. Built Environment Project and Asset Management, 10(2), pp. 261-276. ISSN 2044-124X

Jeeninga, H and Kets, A (2004) Evolution of energy policy in the Netherlands: Past, present and future. Building Research & Information, 32(1), pp. 38-41. ISSN 0961-3218

Jeon, J; Lee, J and Ham, Y (2019) Quantifying the impact of building envelope condition on energy use. Building Research & Information, 47(4), pp. 404-420. ISSN 0961-3218

Jeong, W S (2014) Integrating building information modeling with object-oriented physical modeling for building thermal simulation. PhD thesis, Texas A&M University, USA.

Jervis, E K (2015) Lowering CO2 emissions: a framework for overcoming institutional pressures and diffusing low carbon strategy throughout the construction supply chain. PhD thesis, University of Liverpool, UK.

Ji, Y; Lee, A and Swan, W (2019) Retrofit modelling of existing dwellings in the UK: The Salford energy house case study. International Journal of Building Pathology and Adaptation, 37(3), pp. 344-360. ISSN 23984708

Jiang, A; Zhu, Y; Elsafty, A and Tumeo, M (2018) Effects of global climate change on building energy consumption and its implications in Florida. International Journal of Construction Education and Research, 14(1), pp. 22-45. ISSN 1557-8771

Jiang, X; Zhou, H; Li, M; Lu, K; Lyu, S; Omrani, S and Skitmore, M (2024) Sustainable construction projects management in the AEC industry: Analysis and visualization. International Journal of Construction Management, 24(4), pp. 384-399. ISSN 1562-3599

Jiménez-Moreno, P (2020) Mass customisation for zero energy housing: the potential of Japanese manufacturing practices in the context of sustainable housebuilding in the United Kingdom. PhD thesis, University of Edinburgh, UK.

Jin, R; Yang, T; Piroozfar, P; Kang, B G; Wanatowski, D; Hancock, C M and Tang, L (2018) Project-based pedagogy in interdisciplinary building design adopting BIM. Engineering, Construction and Architectural Management, 25(10), pp. 1376-1397. ISSN 0969-9988

Johnsson, H; Janols, H and Stehn, L (2006) 3D computer visualization in timber construction: some important parameters. Architectural Engineering and Design Management, 2(3), pp. 161-175. ISSN 1745-2007

Johnston, D; Farmer, D; Brooke-Peat, M and Miles-Shenton, D (2016) Bridging the domestic building fabric performance gap. Building Research & Information, 44(2), pp. 147-159. ISSN 0961-3218

Johnston, D; Wingfield, J and Miles-Shenton, D (2010) Measuring the fabric performance of UK dwellings. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Joubert, G D and Raji, A K (2025) Development and validation of a real-time testbed for renewable energy integration studies: South African grid code case study. Journal of Engineering, Design and Technology, 23(1), pp. 1-20. ISSN 1726-0531

Ju, J.; Liu, X.; Xu, F.; Cao, B.; Chen, W.; Wang, X. and Tian, G. (2026) Operational phase recognition and power matching under shoveling conditions in an autonomous loading mobile concrete mixer. Journal of Construction Engineering and Management, 152(9): 04026131, ISSN 0733-9364

Judson, E P and Maller, C (2014) Housing renovations and energy efficiency: Insights from homeowners practices. Building Research & Information, 42(4), pp. 501-511. ISSN 0961-3218

Julayhe, N and Rahman, M M (2021) Dwellers' perception on challenges and motivators of greening existing buildings in Brunei darussalam. Built Environment Project and Asset Management, 11(5), pp. 870-887. ISSN 2044-124X

Jung, C; Ismail, M A; Arar, M and AlQassimi, N (2026) Mitigating indoor air pollution in uae's high-rise apartment buildings: A study on eco-friendly materials and adsorbents. Smart and Sustainable Built Environment, 15(1), pp. 40-61. ISSN 2046-6099

Järvelä, H; Lehto, A; Pirilä, T and Kuittinen, M (2025) Metrics for building component disassembly potential: A practical framework. Buildings & Cities, 6(1), pp. 634-653. ISSN 2632-6655

Kaatz, E; Root, D and Bowen, P (2005) Broadening project participation through a modified building sustainability assessment. Building Research & Information, 33(5), pp. 441-454. ISSN 0961-3218

Kaatz, E; Root, D S; Bowen, P A and Hill, R C (2006) Advancing key outcomes of sustainability building assessment. Building Research & Information, 34(4), pp. 308-320. ISSN 0961-3218

Kaatz, E; Root, D S; Hilland, R C and Bowen, P A (2006) Fostering sustainability and enhancing quality in construction with building sustainability assessment. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kamel Hedayat Abad, M E (2017) Integration and interoperability of building envelope information and energy modeling. PhD thesis, Pennsylvania State University, USA.

Kanellopoulos, G (2022) External fire spread from timber lined compartments. PhD thesis, University of Edinburgh, UK.

Kanninen, V; Ryöppy, S; Lähtinen, K and Toppinen, A (2024) Actor perceptions and network characteristics around climate-wise housing and construction in Finland. Building Research & Information, 52(8), pp. 941-956. ISSN 0961-3218

Karakhan, A A and Gambatese, J A (2017) Identification, quantification, and classification of potential safety risk for sustainable construction in the United States. Journal of Construction Engineering and Management, 143(7): 04017018, ISSN 0733-9364

Karakhan, A A and Gambatese, J A (2017) Integrating worker health and safety into sustainable design and construction: Designer and constructor perspectives. Journal of Construction Engineering and Management, 143(9): 04017069, ISSN 0733-9364

Karunaratne, T L W and De Silva, N (2019) Demand-side energy retrofit potential in existing office buildings. Built Environment Project and Asset Management, 9(3), pp. 426-439. ISSN 2044-124X

Karvonen, A (2013) Towards systemic domestic retrofit: A social practices approach. Building Research & Information, 41(5), pp. 563-574. ISSN 0961-3218

Keles, C and Yazicioglu, F (2023) Analyzing the environmental sustainability of primary schools' facades within the scope of life cycle assessment in Turkey and recommendations for improvement. Smart and Sustainable Built Environment, 12(2), pp. 298-324. ISSN 2046-6099

Kerr, N J (2018) The rationale for retrofit: A multi-level, interdisciplinary perspective on the energy efficient retrofit of existing residential buildings. PhD thesis, University of Leeds, UK.

Khaemba, P (2013) Adoption of green building practices and rating system in Kenya: Potentials and barriers. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Khafiso, T; Adekunle, S A and Clinton, C (2025) Drivers to the adoption of energy management systems in residential buildings. International Journal of Building Pathology and Adaptation, 43(8), pp. 89-107. ISSN 2398-4708

Khanapure, V U and Shastri, S S (2024) A sustainable-lean implementation methodology: A catalyst for sustainability enhancement of high-rise residential projects. Engineering, Construction and Architectural Management, 31(7), pp. 2585-2603. ISSN 0969-9988

Khoshbakht Iradmoosa, Maryam (2019) Building performance studies for higher education campus buildings: Energy use, occupant satisfaction and thermal comfort. PhD thesis, Griffith University, Australia.

Kibert, C J and Fard, M M (2012) Differentiating among low-energy, low-carbon and net-zero-energy building strategies for policy formulation. Building Research & Information, 40(5), pp. 625-637. ISSN 0961-3218

Kim, J; Hyun, J-Y; Chong, W K and Ariaratnam, S (2017) Understanding the effects of environmental factors on building energy efficiency designs and credits: Case studies using data mining and real-time data. Journal of Engineering, Design and Technology, 15(3), pp. 270-285.

Kim, K (2015) Conceptual building information modelling framework for whole-house refurbishment based on LCC and LCA. PhD thesis, Aston University, UK.

Kim, K P and Park, K S (2016) Exploratory research on bim integration in housing refurbishment in the UK. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Kim, S (1998) Sustainable building practices: minimising the life-cycle environmental impact of high-rise apartments in Korea. PhD thesis, University of Edinburgh, UK.

Kim, Su Min (2019) Tenants' leasing motivators and decisions about the greenness of office buildings and their rental. PhD thesis, University of New South Wales, Australia.

Kindangen, J I (1997) Window and roof configurations for comfort ventilation. Building Research & Information, 25(4), pp. 218-225. ISSN 0961-3218

Kissi, E; Babon-Ayeng, P; Aigbavboa, C; Duah, D; Danquah-Smith, E and Tannor, R A (2023) Examining green road construction components: The case of Ghana. Built Environment Project and Asset Management, 13(5), pp. 682-699. ISSN 2044-124X

Ko, W H (2021) View and environmental quality in buildings. PhD thesis, University of California, Berkeley, USA.

Koch, A; Girard, S and McKoen, K (2012) Towards a neighbourhood scale for low- or zero-carbon building projects. Building Research & Information, 40(4), pp. 527-537. ISSN 0961-3218

Komolafe, M O; Oyewole, M O and Kolawole, J T (2016) Extent of incorporation of green features in office properties in Lagos, Nigeria. Smart and Sustainable Built Environment, 5(3), pp. 232-260. ISSN 2046-6099

Konstantinou, T; de Jonge, T; Oorschot, L; El Messlaki, S; van Oel, C and Asselbergs, T (2020) The relation of energy efficiency upgrades and cost of living, investigated in two cases of multi-residential buildings in the Netherlands. Smart and Sustainable Built Environment, 9(4), pp. 615-633. ISSN 2046-6099

Koo, K J and Park, S C (2012) GA-based fuel-efficient transfer path selection model for delivering construction materials. Journal of Construction Engineering and Management, 138(6), pp. 725-732. ISSN 0733-9364

Koranteng, C; Simons, B; Abrokwa Gyimah, K and Nkrumah, J (2023) Ghana's green building assessment journey: An appraisal of the thermal performance of an office building in Accra. Journal of Engineering, Design and Technology, 21(1), pp. 188-205. ISSN 1726-0531

Korishetti, A. C. and Malemath, V. S. (2026) Optimal block search mechanism using deep recurrent neural network for enabling the code-efficiency in hevc. Journal of Engineering, Design and Technology, 24(4), pp. 35-62. ISSN 1726-0531

Kramer, R; Schellen, L and Schellen, H (2018) Adaptive temperature limits for air-conditioned museums in temperate climates. Building Research & Information, 46(6), pp. 686-697. ISSN 0961-3218

Kuittinen, M and Häkkinen, T (2020) Reduced carbon footprints of buildings: New Finnish standards and assessments. Buildings & Cities, 1(1), pp. 182-197. ISSN 2632-6655

Kuittinen, M and Takano, A (2017) The energy efficiency and carbon footprint of temporary homes: A case study from Japan. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 326-343. ISSN 1759-5916

Kulshreshtha, Y (2022) Building affordable, durable and desirable earthen houses: Construction with materials derived from locally available natural and biological resources. PhD thesis, Delft University of Technology, Netherlands.

Kumara, W H C D; Waidyasekara, K G A S and Weerasinghe, R P N P (2016) Building management system for sustainable built environment in Sri Lanka. Built Environment Project and Asset Management, 6(3), pp. 302-316. ISSN 2044-124X

Kuusk, K and Kalamees, T (2016) Retrofit cost-effectiveness: Estonian apartment buildings. Building Research & Information, 44(8), pp. 920-934. ISSN 0961-3218

Kwawu, W and Elmualim, A (2011) Sustainability in facilities management: A review of drivers and policy issues. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Kwofie, T E; Aigbavboa, C O and Thwala, W D (2020) Measures to improve the adoption of life cycle assessment in the South African construction industry. Journal of Engineering, Design and Technology, 18(2), pp. 480-494. ISSN 1726-0531

Kwofie, T E; Aigbavboa, C O and Thwala, W D (2021) Clusters of key barriers to life cycle assessment adoption in the South African construction industry: Perspectives of stakeholders. Journal of Engineering, Design and Technology, 19(4), pp. 888-903. ISSN 1726-0531

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Lachance, E; Lehoux, N and Blanchet, P (2023) A simulation model to analyze different automation scenarios in a mixed-assembly manufacturing line: Timber-frame prefabrication industry. Journal of Construction Engineering and Management, 149(10): 04023091, ISSN 0733-9364

Laloui, H; Abdul Majid, N H and Sanusi, A N Z (2022) The impacts of introducing voids combinations on indoor ventilation performance in high-rise residential buildings. Engineering, Construction and Architectural Management, 29(7), pp. 2736-2759. ISSN 0969-9988

Lam, J C and Hui, S C M (1996) A review of building energy standards and implications for Hong Kong. Building Research & Information, 24(3), pp. 131-140. ISSN 0961-3218

Lapinski, A R; Horman, M J and Riley, D R (2006) Lean processes for sustainable project delivery. Journal of Construction Engineering and Management, 132(10), pp. 1083-1091. ISSN 0733-9364

Lassandro, P and Cosola, T (2018) Climate change mitigation: Resilience indicators for roof solutions. International Journal of Disaster Resilience in the Built Environment, 9(1), pp. 4-17. ISSN 1759-5916

Lau, K K L; Ng, E; Ren, C; Ho, J C K; Wan, L; Shi, Y; Zheng, Y; Gong, F; Cheng, V; Yuan, C; Tan, Z and Wong, K S (2018) Defining the environmental performance of neighbourhoods in high-density cities. Building Research & Information, 46(5), pp. 540-551. ISSN 0961-3218

Laura Pisello, A; Xu, X; Taylor, J E and Cotana, F (2012) Network of buildings' impact on indoor thermal performance. Smart and Sustainable Built Environment, 1(1), pp. 73-86. ISSN 2046-6099

Lawrence, R; Elsayed, M and Keime, C (2019) Evaluation of environmental design strategies for university buildings. Building Research & Information, 47(8), pp. 883-900. ISSN 0961-3218

Lazaro, S. A. M.; Li, X. and Baba, V. F. (2026) Evaluating expanded polystyrene insulation for enhancing energy efficiency in residential buildings: A scalable model from Mozambique. Journal of Engineering, Design and Technology, 24(4), pp. 992-1011. ISSN 1726-0531

Leaman, A and Bordass, B (1999) Productivity in buildings: The 'killer' variables. Building Research & Information, 27(1), pp. 4-19. ISSN 0961-3218

Lee, C; Hong, T; Lee, G and Jeong, J (2012) Life-cycle cost analysis on glass type of high-rise buildings for increasing energy efficiency and reducing CO2 emissions in Korea. Journal of Construction Engineering and Management, 138(7), pp. 897-904. ISSN 0733-9364

Lee, H W (2012) Application of target value design to energy efficiency investments. PhD thesis, University of California, Berkeley, USA.

Lee, H W; Choi, K and Gambatese, J A (2014) Real options valuation of phased investments in commercial energy retrofits under building performance risks. Journal of Construction Engineering and Management, 140(6): 5014004, ISSN 0733-9364

Lee, S-H (2012) Management of building energy consumption and energy supply network on campus scale. PhD thesis, Georgia Institute of Technology, USA.

Legnér, M; Leijonhufvud, G and Tunefalk, M (2020) Energy policy and conservation planning in Sweden: A longitudinal evaluation. International Journal of Building Pathology and Adaptation, 38(4), pp. 555-572. ISSN 23984708

Lei, Haoran (2024) Life cycle assessment in circular economy for built environment. PhD thesis, RMIT University, Australia.

Lewis, A (2013) A framework for improving building operations decisions for energy efficiency. PhD thesis, University of Reading, UK.

Lewis, A and Elmualim, A (2011) Development of a decision support system for proactive energy and maintenance management decisions. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Li, H X; Nair, S; Li, Y; Yahaya, A; Timms, W and Owolabi, A B (2026) Evaluating energy performance of educational buildings: A case study in Australia. Engineering, Construction and Architectural Management, 33(15), pp. 137-158. ISSN 0969-9988

Li, J. and Li, Y. (2026) A mini review of greenhouse gas emissions and mitigation strategies in the building sector. International Journal of Building Pathology and Adaptation, 44(5), pp. 1302-1328. ISSN 2398-4708

Li, B and Yao, R (2012) Building energy efficiency for sustainable development in China: Challenges and opportunities. Building Research & Information, 40(4), pp. 417-431. ISSN 0961-3218

Li, Chenyang (2022) A model for developing retrofitting strategies for office buildings. PhD thesis, University of Technology Sydney, Australia.

Li, F G N; Smith, A Z P; Biddulph, P; Hamilton, I G; Lowe, R; Mavrogianni, A; Oikonomou, E; Raslan, R; Stamp, S; Stone, A; Summerfield, A J; Veitch, D; Gori, V and Oreszczyn, T (2015) Solid-wall U-values: Heat flux measurements compared with standard assumptions. Building Research & Information, 43(2), pp. 238-252. ISSN 0961-3218

Li, H; Xia, Q; Wang, L and Ma, Y (2020) Sustainability assessment of urban water environment treatment public-private partnership projects using fuzzy logic. Journal of Engineering, Design and Technology, 18(5), pp. 1251-1267. ISSN 1726-0531

Li, H X; Ma, Z; Liu, H; Wang, J; Al-Hussein, M and Mills, A (2020) Exploring and verifying BIM-based energy simulation for building operations. Engineering, Construction and Architectural Management, 27(8), pp. 1679-1702. ISSN 0969-9988

Li, Q (2009) Energy efficiency design of residential buildings in North China cities. PhD thesis, Cardiff University, UK.

Li, Q; Syal, M; Turner, N and Arif, M (2013) Constructors and innovation credits in green building projects. Construction Innovation, 13(3), pp. 320-338. ISSN 1471-4175

Li, Shuyang (2020) Proactive design approaches for energy-efficient buildings. PhD thesis, University of California, USA.

Li, Y; Cao, L; Zhang, J; Jiang, Y; Han, Y and Wei, J (2021) Energy benchmarking in healthcare facilities: A comparative study. Journal of Construction Engineering and Management, 147(11): 04021159, ISSN 0733-9364

Liddiard, R (2014) Room-scale profiles of space use and electricity consumption in non-domestic buildings. Building Research & Information, 42(1), pp. 72-94. ISSN 0961-3218

Liddiard, R; Godoy-Shimizu, D; Ruyssevelt, P; Steadman, P; Evans, S; Humphrey, D and Azhari, R (2021) Energy use intensities in London houses. Buildings & Cities, 2(1), pp. 336-353. ISSN 2632-6655

Lidelow, S and Engstrom, S (2015) Furthering sustainable building or not? Discussing contractors' reflections on a sustainable building pilot project. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Lienhard, J and Eversmann, P (2021) New hybrids–from textile logics towards tailored material behaviour. Architectural Engineering and Design Management, 17(3-4), pp. 169-174. ISSN 1745-2007

Lima, Luanda Regina Reis (2022) A systematic approach for developing sustainability guidelines for stakeholders in public project management. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Lin, C L; Chiang, W H; Weng, Y S and Wu, H P (2023) Assessing the anthropogenic carbon emission of wooden construction: An LCA study. Building Research & Information, 51(2), pp. 138-157. ISSN 0961-3218

Lin, G (2011) Decision model for determination of adaptation potential and renewal action for public housing in Singapore. PhD thesis, National University of Singapore, Singapore.

Lin, K-Y (2013) Investigating reducing building energy use at urban scale in Taipei. PhD thesis, Cardiff University, UK.

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Lisco, M and Aulin, R (2024) Taxonomy supporting design strategies for reuse of building parts in timber-based construction. Construction Innovation, 24(1), pp. 221-241. ISSN 1471-4175

Littlefair, P J (1998) Predicting lighting energy use under daylight linked lighting controls. Building Research & Information, 26(4), pp. 208-222. ISSN 0961-3218

Liu, X; Zhu, T; Xue, Y; Huang, Z and Le, Y (2025) Analyzing the drivers of the low-carbon construction supply chain based on an integrated DEMATEL-ANP approach. Engineering, Construction and Architectural Management, 32(8), pp. 5132-5159. ISSN 0969-9988

Liu, A M M; Lau, W S W and Fellows, R (2012) The contributions of environmental management systems towards project outcome: Case studies in Hong Kong. Architectural Engineering and Design Management, 8(3), pp. 160-169. ISSN 1745-2007

Liu, Jiani (2014) Developing a life cycle assessment model for measuring sustainable performance of buildings in China. PhD thesis, University of Technology Sydney, Australia.

Liu, L (2017) A systematic approach for major renovation of residential buildings. PhD thesis, Linköping University, Sweden.

Liu, Margaret Ze-Yu (2016) Energy efficiency retrofits of tertiary education buildings: An investigation of case studies in New South Wales. PhD thesis, University of Sydney, Australia.

Liu, P (2025) Enhancing construction safety: Assessing training effectiveness using wearable sensing technology and optimizing work zone configuration through a behavioral approach. PhD thesis, University of Wyoming, USA.

Liu, Z (2014) Building information modelling (BIM) aided waste minimisation framework. PhD thesis, Loughborough University, UK.

Lizana, J; Miranda, N D; Gross, L; Mazzone, A; Cohen, F; Palafox-Alcantar, G; Fahr, P; Jani, A; Renaldi, R; McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings & Cities, 3(1), pp. 1075-1097. ISSN 2632-6655

Llale J, C-M O (2023) Potential benefits of close proximity of taxi ranks to retail developments. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Lockwood, T A (2008) A new market risk model for cogeneration project financing—combined heat and power development without a power purchase agreement. PhD thesis, Walden University, USA.

Longo, Leticia França Mattaraia (2020) Design for disassembly and BIM: Design tools to improve the reuse of materials. PhD thesis, Universidade de São Paulo, Brazil.

Lopes, M A R; Antunes, C H; Reis, A and Martins, N (2017) Estimating energy savings from behaviours using building performance simulations. Building Research & Information, 45(3), pp. 303-319. ISSN 0961-3218

Lord, S-F; Noye, S; Ure, J; Tennant, M G and Fisk, D J (2016) Comparative review of building commissioning regulation: A quality perspective. Building Research & Information, 44(5-6), pp. 630-643. ISSN 0961-3218

Lou, Y (2022) Interconnections among energy consumption, carbon emissions, and economic impacts for sustainable buildings. PhD thesis, University of Colorado at Boulder, USA.

Love, P E D; Niedzweicki, M; Bullen, P A and Edwards, D J (2012) Achieving the green building council of Australia's world leadership rating in an office building in perth. Journal of Construction Engineering and Management, 138(5), pp. 652-660. ISSN 0733-9364

Lowe, R (2000) Defining and meeting the carbon constraints of the 21st century. Building Research & Information, 28(3), pp. 159-175. ISSN 0961-3218

Lowe, R (2006) Defining absolute environmental limits for the built environment. Building Research & Information, 34(4), pp. 405-415. ISSN 0961-3218

Lowe, R (2009) Policy and strategy challenges for climate change and building stocks. Building Research & Information, 37(2), pp. 206-212. ISSN 0961-3218

Lu, W; Tam, V W Y; Chen, H and Du, L (2020) A holistic review of research on carbon emissions of green building construction industry. Engineering, Construction and Architectural Management, 27(5), pp. 1065-1092. ISSN 0969-9988

Lu, Y; Scott, A; Kim, J; Curi, C B; McCarty, J; Pardy, A; Rysanek, A; Girling, C and Kellett, R (2021) Integration of an energy-economy model with an urban energy model. Buildings & Cities, 2(1), pp. 114-133. ISSN 2632-6655

Lucas, A N and Löschke, S K (2025) Towards circular renovation: A comparative review of circular economy integration in sustainable building rating systems. Building Research & Information, 53(3), pp. 375-396. ISSN 0961-3218

Ludvig, K; Stenberg, A C and Gluch, P (2013) The value of communicative skills for developing an energy strategy. Building Research & Information, 41(6), pp. 611-621. ISSN 0961-3218

Lundgren, M S (2016) Energy and architectural consequences of Swedish building code. Smart and Sustainable Built Environment, 5(2), pp. 125-142. ISSN 2046-6099

Luo, M; Zhang, H; Wang, Z; Arens, E; Chen, W; Bauman, F S and Raftery, P (2021) Ceiling-fan-integrated air-conditioning: Thermal comfort evaluations. Buildings & Cities, 2(1), pp. 928-951. ISSN 2632-6655

Lützkendorf, T; Fan, W and Lorenz, D (2011) Engaging financial stakeholders: Opportunities for a sustainable built environment. Building Research & Information, 39(5), pp. 483-503. ISSN 0961-3218

Ma, J (2016) A data driven study on LEED credits and green building related implications in city planning. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Ma, K; Shen, W; Chen, W and Dangana, Z (2023) Facilitating net-zero target in the building sector through online transaction platforms: Feedback from industrial practitioners. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ma, Y (2011) A semiotic framework for buildings performance assessment. PhD thesis, University of Reading, UK.

Ma, Yunlong (2020) Holistic assessment of the impacts of building energy code improvements on Australian commercial buildings. PhD thesis, Queensland University of Technology, Australia.

Maby, C and Gwilliam, J (2022) Integrating energy efficiency into private home repair, maintenance and improvement practice in England and Wales. Building Research & Information, 50(4), pp. 424-437. ISSN 0961-3218

Machado, M V; La Roche, P M; Mustieles, F and De Oteiza, I (2000) The fourth house: The design of a bioclimatic house in Venezuela. Building Research & Information, 28(3), pp. 196-211. ISSN 0961-3218

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: Lessons from a PoE case study. Building Research & Information, 33(1), pp. 17-31. ISSN 0961-3218

Madsen, L V (2018) Materialities shape practices and notions of comfort in everyday life. Building Research & Information, 46(1), pp. 71-82. ISSN 0961-3218

Magent, C S (2005) A process and competency-based approach to high performance building design. PhD thesis, Pennsylvania State University, USA.

Mah, D E (2011) Framework for rating the sustainability of the residential construction practice. PhD thesis, University of Alberta, Canada.

Mahamedi, E; Wonders, M; Kassem, M; Woo, W L and Greenwood, D (2022) Digital twin and building performance: A review and proposed framework. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Mahdy, M M M (2014) Applying architecture simulation tools to assess building sustainable design: adapting the Egyptian residential energy code for climate change. PhD thesis, University of Kent, UK.

Mahmoud, S; Hussein, M; Zayed, T and Fahmy, M (2022) Multiobjective optimization model for the life cycle cost-sustainability trade-off problem of building upgrading using a generic sustainability assessment tool. Journal of Construction Engineering and Management, 148(7): 04022050, ISSN 0733-9364

Majdalani, Z; Ajam, M and Mezher, T (2006) Sustainability in the construction industry: A Lebanese case study. Construction Innovation, 6(1), pp. 33-46. ISSN 1471-4175

Mallaburn, P; Azhari, R; Fawcett, T and Topouzi, M (2021) Australian non-domestic buildings policy as an international exemplar. Buildings & Cities, 2(1), pp. 318-335. ISSN 2632-6655

Mang, P and Reed, B (2015) The nature of positive. Building Research & Information, 43(1), pp. 7-10. ISSN 0961-3218

Manrique Delgado, B; Cao, S; Hasan, A and Sirén, K (2018) Energy and exergy analysis of prosumers in hybrid energy grids. Building Research & Information, 46(6), pp. 668-685. ISSN 0961-3218

Mapfumo, E T; Emuze, F; Smallwood, J and Ebekozien, A (2024) Appraising challenges facing Zimbabwe’s building retrofitting for energy efficiency using structural equation model approach. International Journal of Building Pathology and Adaptation, 42(7), pp. 76-92. ISSN 23984708

Marchwiński, J and Kurtz-Orecka, K (2023) Effect of photovoltaic installation power and façade glazing ratio on the energy performance of a nursery building. Engineering, Construction and Architectural Management, 30(4), pp. 1463-1480. ISSN 0969-9988

Marcos, Micheline Helen Cot (2015) Method of obtaining environmental impact data, during the design development process through use of BIM tool. PhD thesis, Universidade de São Paulo, Brazil.

Marsh, A T M and Kulshreshtha, Y (2022) The state of earthen housing worldwide: How development affects attitudes and adoption. Building Research & Information, 50(5), pp. 485-501. ISSN 0961-3218

Martabid, J E and Mourgues, C (2015) Criteria used for selecting envelope wall systems in Chilean residential projects. Journal of Construction Engineering and Management, 141(12): 05015011, ISSN 0733-9364

Martins, S S; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Evaluation of 4D BIM tools applicability in construction planning efficiency. International Journal of Construction Management, 22(15), pp. 2987-3000. ISSN 1562-3599

Martínez, A; Alonso, C; Martín-Consuegra, F; Pérez, G; Frutos, B and Gutiérrez, Á (2021) Experimental analysis of a prototype for a thermochromic trombe wall. Building Research & Information, 49(7), pp. 777-794. ISSN 0961-3218

Mathur, A (2019) Public costs and private benefits: The governance of energy efficiency in India. Building Research & Information, 47(1), pp. 123-126. ISSN 0961-3218

Mattaraia, L; Fabricio, M M and Codinhoto, R (2023) Structure for the classification of disassembly applied to BIM models. Architectural Engineering and Design Management, 19(1), pp. 56-73. ISSN 1745-2007

McCord, M; Davis, P; McCord, J; Haran, M and Davison, K (2020) An exploratory investigation into the relationship between energy performance certificates and sales price: A polytomous universal model approach. Journal of Financial Management of Property and Construction, 25(2), pp. 247-271. ISSN 1366-4387

McDonnell, A and Sinnott, D (2010) Barriers and enablers to energy efficient retrofitting of dwellings in Ireland. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

McElroy, D J and Rosenow, J (2019) Policy implications for the performance gap of low-carbon building technologies. Building Research & Information, 47(5), pp. 611-623. ISSN 0961-3218

McGill, G; Oyedele, L O and McAllister, K (2015) An investigation of indoor air quality, thermal comfort and sick building syndrome symptoms in UK energy efficient homes. Smart and Sustainable Built Environment, 4(3), pp. 329-348. ISSN 2046-6099

McGilligan, C; Wilde, P and Goodhew, S (2008) An assessment of the potential returns of energy certificates for the UK household sector. Journal of Financial Management of Property and Construction, 13(3), pp. 187-199. ISSN 1366-4387

Mechlenborg, M and Gram-Hanssen, K (2022) Masculine roles and practices in homes with photovoltaic systems. Buildings & Cities, 3(1), pp. 638-652. ISSN 2632-6655

Meglin, R (2022) Economic and environmental assessment of a regional construction and building materials industry in Switzerland: An applied combination of material-flow analysis, life-cycle assessment and input-output analysis. DSc thesis, ETH Zürich, Switzerland.

Mehrvarz, Nassim (2025) Optimising sustainability in building design from a life cycle perspective. PhD thesis, University of New South Wales, Australia.

Meistad, T (2014) How energy efficient office buildings challenge and contribute to usability. Smart and Sustainable Built Environment, 3(2), pp. 110-131. ISSN 2046-6099

Meistad, Torill Randi (2015) Sustainable building: From role model projects to industrial transformation. PhD thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Mellado, F; Wong, P F; Amano, K; Johnson, C and Lou, E C W (2020) Digitisation of existing buildings to support building assessment schemes: Viability of automated sustainability-led design scan-to-BIM process. Architectural Engineering and Design Management, 16(2), pp. 84-99. ISSN 1745-2007

Meng, Q; Zhang, Y; Li, Z; Shi, W; Wang, J; Sun, Y; Xu, L and Wang, X (2020) A review of integrated applications of BIM and related technologies in whole building life cycle. Engineering, Construction and Architectural Management, 27(8), pp. 1647-1677. ISSN 0969-9988

Meng, Y (2023) Multi-objective optimal design and assessment framework of freeform timber structure oriented by robotic automation construction. PhD thesis, University of Sheffield, UK.

Mhundwa, R and Simon, M (2021) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (DXBMC) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Mikulić, D; Lovrinčević, Ž and Keček, D (2021) Valorization of economic effects from the programme of energy renovation of public buildings in Croatia. Building Research & Information, 49(5), pp. 561-573. ISSN 0961-3218

Miles-Shenton, D; Parker, J; Glew, D and Thomas, F (2025) Quantifying inter-dwelling air exchanges during fan pressurisation tests. Buildings & Cities, 6(1), pp. 239-254. ISSN 2632-6655

Mills, E (2003) Climate change, insurance and the buildings sector: Technological synergisms between adaptation and mitigation. Building Research & Information, 31(3-4), pp. 257-277. ISSN 0961-3218

Mirzabeigi, S (2024) Integrated building envelope assessment towards automation of energy retrofits: Drone-based data acquisition, automated thermal anomaly detection, and workflow development. PhD thesis, State University of New York College of Environmental Science and Forestry, USA.

Mlecnik, E (2013) Innovation development for highly energy-efficient housing: Opportunities and challenges related to the adoption of passive houses. PhD thesis, Delft University of Technology, Netherlands.

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Mohammadpour, A (2014) Retrofitting healthcare facilities to enhance patient safety and energy efficiency. PhD thesis, Pennsylvania State University, USA.

Mohanta, A and Das, S (2023) Decision support system for the early stage of green building envelope design considering energy and maintainability. Architectural Engineering and Design Management, 19(2), pp. 163-182. ISSN 1745-2007

Mohareb, E; Gillich, A and Bristow, D (2022) Participation in domestic energy retrofit programmes: Key spatio-temporal drivers. Buildings & Cities, 3(1), pp. 356-375. ISSN 2632-6655

Mokhtar, A N S; Wilkinson, S and Fassman, E (2015) Strategies for improving energy saving behaviour in commercial buildings in Malaysia. Engineering, Construction and Architectural Management, 22(1), pp. 73-90. ISSN 0969-9988

Mokhtar Azizi, N S; Wilkinson, S and Fassman, E (2014) Management practice to achieve energy-efficient performance of green buildings in New Zealand. Architectural Engineering and Design Management, 10(1-2), pp. 25-39. ISSN 1745-2007

Moncaster, A (2012) Constructing sustainability: connecting the social and the technical in a case study of school building projects. PhD thesis, University of East Anglia, UK.

Moore, A W (2019) Middle matters: intermediaries and the practice of home energy retrofit. PhD thesis, University of Manchester, UK.

Moradi, S; Hirvonen, J and Sormunen, P (2026) Collaborative and life cycle-based project delivery for environmentally sustainable building construction: Views of Finnish project professionals and building operation and maintenance experts. Smart and Sustainable Built Environment, 15(1), pp. 407-430. ISSN 2046-6099

Moradi, S; Hirvonen, J and Sormunen, P (2024) A qualitative and life cycle-based study of the energy performance gap in building construction: Perspectives of Finnish project professionals and property maintenance experts. Building Research & Information, 52(5), pp. 564-576. ISSN 0961-3218

Morgenstern, P; Lowe, R and Chiu, L F (2015) Heat metering: Socio-technical challenges in district-heated social housing. Building Research & Information, 43(2), pp. 197-209. ISSN 0961-3218

Mostafaeipour, A; Goudarzi, H; Sedaghat, A; Jahangiri, M; Hadian, H; Rezaei, M; Golmohammadi, A M and Karimi, P (2019) Energy efficiency for cooling buildings in hot and dry regions using sol-air temperature and ground temperature effects. Journal of Engineering, Design and Technology, 17(3), pp. 613-628. ISSN 1726-0531

Mostavi, E (2018) Development of multiple criteria decision making instrument in designing of high performance commercial buildings. PhD thesis, Pennsylvania State University, USA.

Motjolopane, B P and van Zyl, R (2009) A review of rectenna models for electromagnetic energy harvesting. Journal of Engineering, Design and Technology, 7(3), pp. 282-292. ISSN 1726-0531

Mourshed, M (2006) Interoperability-based optimisation of architectural design. PhD thesis, Loughborough University, UK.

Mugabi, J and Marin, P (2008) PPP in urban water: Lessons from Yerevan, Armenia. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(4), pp. 171-178. ISSN 17514312

Mulville, M; Jones, K and Huebner, G (2014) The potential for energy reduction in UK commercial offices through effective management and behaviour change. Architectural Engineering and Design Management, 10(1-2), pp. 79-90. ISSN 1745-2007

Mulville, M and Stravoravdis, S (2016) The impact of regulations on overheating risk in dwellings. Building Research & Information, 44(5-6), pp. 520-534. ISSN 0961-3218

Munaro, M R; Freitas, M D C D; Tavares, S F and Bragança, L (2021) Circular business models: Current state and framework to achieve sustainable buildings. Journal of Construction Engineering and Management, 147(12): 04021164, ISSN 0733-9364

Mund, A T (2002) An evaluation framework for exterior envelope wall systems for the homebuilding industry. PhD thesis, Arizona State University, USA.

Murtagh, N; Achkar, L and Roberts, A (2016) “The people that no-one notices”: The power of building control inspectors in sustainable construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Mushtaha, E; Shamsuzzaman, M; Abdouli, S A; Hamdan, S and Soares, T G (2020) Application of the analytic hierarchy process to developing sustainability criteria and assessing heritage and modern buildings in the UAE. Architectural Engineering and Design Management, 16(5), pp. 329-355. ISSN 1745-2007

Mustaffa, N K; Abdul Kudus, S; Abdul Aziz, M F H and Anak Joseph, V R (2022) Strategies and way forward of low carbon construction in Malaysia. Building Research & Information, 50(6), pp. 628-645. ISSN 0961-3218

Myers, H; Wade, F and Webb, J (2019) Mapping emerging subcontracting networks for the energy efficiency retrofit of hard-to-treat buildings. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Namini, Seyed Saeed Banihashemi (2017) Active BIM with artifical intelligence for energy optimisation in buildings. PhD thesis, University of Technology Sydney, Australia.

Navon, R; Arkin, H and Burg, I (1997) Economic evaluation of HVAC systems with ice storage designed using an optimization technique. Construction Management and Economics, 15(5), pp. 429-439. ISSN 01446193

Nazari, S; Keshavarz Mirza Mohammadi, P; Ghaffarianhoseini, A; Ghaffarianhoseini, A; Doan, D T and Almhafdy, A (2025) Comparison of shading design between the northern and southern hemispheres: Using the NSGA-II algorithm to reduce building energy consumption and improve occupants' comfort. Smart and Sustainable Built Environment, 14(4), pp. 889-920. ISSN 2046-6099

Nazeer, S F and De Silva, N (2016) Tbpe scoring framework for tropical buildings. Built Environment Project and Asset Management, 6(2), pp. 174-186. ISSN 2044-124X

Newsham, G R; Birt, B J; Arsenault, C; Thompson, A J L; Veitch, J A; Mancini, S; Galasiu, A D; Gover, B N; MacDonald, I A and Burns, G J (2013) Do green buildings have better indoor environments? New evidence. Building Research & Information, 41(4), pp. 415-434. ISSN 0961-3218

Newton, P W and Tucker, S N (2011) Pathways to decarbonizing the housing sector: A scenario analysis. Building Research & Information, 39(1), pp. 34-50. ISSN 0961-3218

Neya, I; Yamegueu, D; Messan, A; Coulibaly, Y; Ouedraogo, A L S N and Ayite, Y M X D (2025) Effect of cement and geopolymer stabilization on the thermal comfort: Case study of an earthen building in Burkina Faso. International Journal of Building Pathology and Adaptation, 43(3), pp. 283-301. ISSN 2398-4708

Ngoy, Kabemba Steve; Daweti, Esona; Molise, Relebohile; Chinasamy, Darmarajan and Windapo, Abimbola (2026) Evaluation of sustainable building technologies adoption in housing construction across socio-economic contexts in Cape Town, South Africa. Journal of Construction Business and Management, 8(S1), pp. 140-154. ISSN 2521-0165

Nguyen, D M; Ding, G and Runeson, G (2020) Energy and economic analysis of environmental upgrading of existing office buildings. Construction Economics and Building, 20(4), pp. 82-102. ISSN 2204-9029

Nguyen, H D; Nguyen, L D; Chih, Y Y and Le-Hoai, L (2017) Influence of participants' characteristics on sustainable building practices in emerging economies: Empirical case study. Journal of Construction Engineering and Management, 143(8): 05017014, ISSN 0733-9364

Nguyen, P A; Bokel, R and Dobbelsteen, A (2019) Improving energy efficiency in Vietnamese tube houses: A survey of sustainable challenges and potentials. Smart and Sustainable Built Environment, 8(5), pp. 366-390. ISSN 2046-6099

Nicholls, C (2014) Energy use in non-domestic buildings: The UK government's new evidence base. Building Research & Information, 42(1), pp. 109-117. ISSN 0961-3218

Nidhin, B K S N; Domingo, N; Bui, T T P and Wilkinson, S (2025) Construction stakeholders' knowledge on zero carbon initiatives in New Zealand. International Journal of Building Pathology and Adaptation, 43(3), pp. 512-527. ISSN 2398-4708

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Nikou, T and Klotz, L (2014) Application of multi-attribute utility theory for sustainable energy decisions in commercial buildings: A case study. Smart and Sustainable Built Environment, 3(3), pp. 207-222. ISSN 2046-6099

Niu, S and Pan, W (2016) Perspectives and practices of collaborative energy design technologies for closing the building energy performance gap. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Nordby, A S; Berge, B; Hakonsen, F and Hestnes, A G (2009) Criteria for salvageability: The reuse of bricks. Building Research & Information, 37(1), pp. 55-67. ISSN 0961-3218

Nouri, H; Safehian, M and Mir Mohammad Hosseini, S M (2023) Life cycle assessment of earthen materials for low-cost housing a comparison between rammed earth and fired clay bricks. International Journal of Building Pathology and Adaptation, 41(2), pp. 364-377. ISSN 23984708

Novak, V M; Fernandez-Anez, N and Shiraishi, K (2017) Rethinking resilience planning: From problems to potential. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 412-424. ISSN 1759-5916

Ntshwene, K; Essah, E A and Dixon, T J (2014) Investigating the level of awareness of building assessment tools in the construction industry of Botswana. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Nwagwu, C C; Akin, S and Hertwich, E G (2024) Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis. Buildings & Cities, 5(1), pp. 521-539. ISSN 2632-6655

Nwaogu, O (2017) A systems approach to the development of an energy benchmarking process model for commercial buildings. DEng thesis, Morgan State University, USA.

O'Sullivan, D T J (2005) Improving building performance by tracking performance metrics using an IFC data model. PhD thesis, University College Cork, Ireland.

Oates, D and Sullivan, K T (2012) Postoccupancy energy consumption survey of Arizona's LEED new construction population. Journal of Construction Engineering and Management, 138(6), pp. 742-750. ISSN 0733-9364

Ochoa Paniagua, J J (2011) Production planning approach for implementing sustainable building projects. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Odubiyi, A O and Davidson, I E (2005) England and Wales electricity industry: experiences in deregulation. Journal of Engineering, Design and Technology, 3(1), pp. 24-29. ISSN 1726-0531

Ofori-Boadu, A N; Owusu-Manu, D G; Edwards, D J and Asiseh, F (2021) A conceptual model of subcontractor development practices for LEED projects. Engineering, Construction and Architectural Management, 28(4), pp. 1196-1213. ISSN 0969-9988

Ofori-Boadu, A N; Shofoluwe, M A; Owusu-Manu, D-G; Holt, G D and Edwards, D (2015) Analysis of US commercial buildings' energy efficiency programs. Built Environment Project and Asset Management, 5(4), pp. 349-362. ISSN 2044-124X

Ohueri, C C; Enegbuma, W I and Kenley, R (2018) Energy efficiency practices for Malaysian green office building occupants. Built Environment Project and Asset Management, 8(2), pp. 134-146. ISSN 2044-124X

Oke, A E; Aliu, J; Mwanaumo, E M; Odia, O A; Kahanji, C and Tengan, C (2024) From awareness to action: a study of the effectiveness of environmental economic practices for sustainable construction in Nigeria. Smart and Sustainable Built Environment, 13(5), pp. 1194-1212. ISSN 2046-6099

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Olaniyi, O O (2017) Development of a facilities management framework for sustainable building practices in Nigeria. PhD thesis, University of Central Lancashire, UK.

Oliveira, S and Flynn, P (2015) Towards an understanding of building energy management education – users' expectations of a UK distance learning course. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Oliveira, S; Marco, E; Gething, B and Organ, S (2017) Evolutionary, not revolutionary: logics of early design energy modelling adoption in UK architecture practice. Architectural Engineering and Design Management, 13(3), pp. 168-184. ISSN 1745-2007

Omar, M R; Ayob, A; Zakaria, M H; Rahim, N S A; Mokhtar, H; Rani, H A and Rahman, F A (2023) Perspective of construction building professionals on low-carbon materials in Malaysia. Journal of Construction in Developing Countries, 28(2), pp. 139-162. ISSN 1823-6499

Omar Attallah, S; Senouci, A; Kandil, A and al-Derham, H (2013) Utilization of life-cycle analysis to evaluate sustainability rating systems for construction projects with a case study on qatar sustainability assessment system (qsas). Smart and Sustainable Built Environment, 2(3), pp. 272-287. ISSN 2046-6099

Omotayo, T S; Awuzie, B and Lovelin, O (2023) Synergising continuous improvement with circular economy for advancing innovation in the construction sector: A text mining approach. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Onaran, B E (1996) The construction of professional identity in architecture and landscape architecture: Convictions about skills, knowledge, and professional roles in design. PhD thesis, University of Wisconsin - Madison, USA.

Ono, Eikichi (2025) Occupant-centric design for functional and thermal zoning at activity-based workspaces. PhD thesis, National University of Singapore, Singapore.

Onubi, H O; Yusof, N and Hassan, A S (2020) Adopting green construction practices: Health and safety implications. Journal of Engineering, Design and Technology, 18(3), pp. 635-652. ISSN 1726-0531

Onubi, H O; Yusof, N and Hassan, A S (2020) Effects of green construction on project's economic performance. Journal of Financial Management of Property and Construction, 25(3), pp. 331-346. ISSN 1366-4387

Onubi, H O; Yusof, N A and Hassan, A S (2019) Green site practices and environmental performance: How project complexity moderates the relationship. Construction Economics and Building, 19(1), pp. 75-95. ISSN 2204-9029

Onyenokporo, N C and Ochedi, E T (2019) Low-cost retrofit packages for residential buildings in hot-humid Lagos, Nigeria. International Journal of Building Pathology and Adaptation, 37(3), pp. 250-272. ISSN 23984708

Organ, S (2020) The opportunities and challenges of improving the condition and sustainability of a historic building at an international tourist attraction in the UK. International Journal of Building Pathology and Adaptation, 38(2), pp. 329-355. ISSN 23984708

Organ, S (2021) Minimum energy efficiency: Is the energy performance certificate a suitable foundation? International Journal of Building Pathology and Adaptation, 39(4), pp. 581-601. ISSN 2398-4708

Ortlepp, R; Gruhler, K and Schiller, G (2016) Material stocks in Germany's non-domestic buildings: A new quantification method. Building Research & Information, 44(8), pp. 840-862. ISSN 0961-3218

Osuizugbo, I C; Orekan, A A; Omer, M and Simon, R F (2025) An exploratory factor analysis on technological-related barriers to the construction of zero-energy buildings in Nigeria. International Journal of Building Pathology and Adaptation, 43(7), pp. 1897-1918. ISSN 2398-4708

Ou, J; Chen, Z; Long, W; Chen, D and Zhang, Y (2024) Vibrational performance of wood floors in traditional residential timber structures in southwest China. Architectural Engineering and Design Management, 20(6), pp. 1529-1542. ISSN 1745-2007

Outcault, S; Alston-Stepnitz, E; Sanguinetti, A; DePew, A N and Magaña, C (2022) Building lower-carbon affordable housing: Case studies from California. Building Research & Information, 50(6), pp. 646-661. ISSN 0961-3218

Owusu-Manu, D G; Babon-Ayeng, P; Kissi, E; Edwards, D J; Okyere-Antwi, D and Elgohary, H (2023) Green construction and environmental performance: An assessment framework. Smart and Sustainable Built Environment, 12(3), pp. 565-583. ISSN 2046-6099

Ozcan, D G (2017) An analytic network process model to examine LEED-certified buildings' operational performance. Built Environment Project and Asset Management, 7(4), pp. 366-376. ISSN 2044-124X

Ozkan, A; Kesik, T; Yilmaz, A Z and O’Brien, W (2019) Development and visualization of time-based building energy performance metrics. Building Research & Information, 47(5), pp. 493-517. ISSN 0961-3218

Palaniappan, S; Bashford, H; Li, K; Fafitis, A and Stecker, L (2009) Carbon emissions based on transportation for post-tensioned slab foundation construction: A production home building study in the greater phoenix arizona area. International Journal of Construction Education and Research, 5(4), pp. 236-260. ISSN 1557-8771

Pallubinsky, H; Kingma, B R M; Schellen, L; Dautzenberg, B; van Baak, M A and van Marken Lichtenbelt, W D (2017) The effect of warmth acclimation on behaviour, thermophysiology and perception. Building Research & Information, 45(7), pp. 800-807. ISSN 0961-3218

Pan, W and Pan, M (2023) Rethinking lean synergistically in practice for construction industry improvements. Engineering, Construction and Architectural Management, 30(7), pp. 2669-2690. ISSN 0969-9988

Panadés, K.; Olbina, S. and Kohlman Rabbani, E. R. (2026) Social sustainability in building retrofit projects: A systematic literature review. International Journal of Building Pathology and Adaptation, 44(4), pp. 1098-1120. ISSN 2398-4708

Papamichael, K (1999) Application of information technologies in building design decisions. Building Research & Information, 27(1), pp. 20-34. ISSN 0961-3218

Parasonis, J; Keizikas, A and Kalibatiene, D (2012) The relationship between the shape of a building and its energy performance. Architectural Engineering and Design Management, 8(4), pp. 246-256. ISSN 1745-2007

Parkhurst, G and Parnaby, R (2008) Growth in mobile air-conditioning: A socio-technical research agenda. Building Research & Information, 36(4), pp. 351-362. ISSN 0961-3218

Parkin, A; Herrera, M and Coley, D A (2020) Net-zero buildings: When carbon and energy metrics diverge. Buildings & Cities, 1(1), pp. 86-99. ISSN 2632-6655

Parkinson, A T; Friedman, K S; Hacking, T; Cooke, A J and Guthrie, P M (2012) Exploring scenarios for the future of energy management in UK property. Building Research & Information, 40(3), pp. 373-388. ISSN 0961-3218

Parkinson, A T; Reid, R; McKerrow, H and Wright, D (2018) Evaluating positivist theories of occupant satisfaction: A statistical analysis. Building Research & Information, 46(4), pp. 430-443. ISSN 0961-3218

Passe, U; Dorneich, M; Krejci, C; Koupaei, D M; Marmur, B; Shenk, L; Stonewall, J; Thompson, J and Zhou, Y (2020) An urban modelling framework for climate resilience in low-resource neighbourhoods. Buildings & Cities, 1(1), pp. 453-474. ISSN 2632-6655

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Pavlovas, V (2006) Energy savings in existing Swedish apartment buildings: Some aspects on demand controlled ventilation and individual metering. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Pearl, D S and Oliver, A (2015) The role of early-phase mining in reframing net-positive development. Building Research & Information, 43(1), pp. 34-48. ISSN 0961-3218

Pearlmutter, D; Freidin, C and Huberman, N (2007) Alternative materials for desert buildings: A comparative life cycle energy analysis. Building Research & Information, 35(2), pp. 144-155. ISSN 0961-3218

Pearson, A D (2014) An investigation of climatically responsive ultra-low energy housing in rural Scotland: a case study. PhD thesis, University of Dundee, UK.

Peel, J; Ahmed, V and Saboor, S (2020) An investigation of barriers and enablers to energy efficiency retrofitting of social housing in London. Construction Economics and Building, 20(2), pp. 127-149. ISSN 2204-9029

Pelenur, M (2014) Retrofitting the domestic built environment: Investigating household perspectives towards energy efficiency technologies and behaviour. PhD thesis, University of Cambridge, UK.

Pellegrini-Masini, G; Bowles, G; Peacock, A D; Ahadzi, M and Banfill, P F G (2010) Whole life costing of domestic energy demand reduction technologies: Householder perspectives. Construction Management and Economics, 28(3), pp. 217-229. ISSN 1466433X

Peterman, A (2013) The roles within: Building energy conservation in the United States through alliance networks and other voluntary strategies. PhD thesis, Stanford University, USA.

Petkov, I (2022) Optimal decarbonization conditions for buildings & districts: A model-based techno-economic perspective. DSc thesis, ETH Zürich, Switzerland.

Piao, Y (2020) Case studies to determine the effect of applying blockchain technology and building information modeling on the workflow of water infrastructure projects. PhD thesis, Stanford University, USA.

Pim-Wusu, M.; Gyamfi, T. A.; Thwala, W. D. and Aigbavboa, C. O. (2026) Influence of education and training on sustainable construction adaptive capacity in the construction industry. Construction Economics and Building, 26(2), ISSN 2204-9029

Pivo, G (2008) Responsible property investment criteria developed using the Delphi method. Building Research & Information, 36(1), pp. 20-36. ISSN 0961-3218

Pivo, G (2014) Unequal access to energy efficiency in us multifamily rental housing: Opportunities to improve. Building Research & Information, 42(5), pp. 551-573. ISSN 0961-3218

Plaut, J M; Dunbar, B; Wackerman, A and Hodgin, S (2012) Regenerative design: The lenses framework for buildings and communities. Building Research & Information, 40(1), pp. 112-122. ISSN 0961-3218

Polat, G and Bayhan, H G (2022) Selection of HVAC-ahu system supplier with environmental considerations using fuzzy edas method. International Journal of Construction Management, 22(10), pp. 1863-1871. ISSN 1562-3599

Polson, D R (2020) Assessment of applications of optimisation to building design and energy modelling. PhD thesis, University of London, University College London, UK.

Poma, E; Palma, D; Molina, M and Graf, F (2024) The kindergarten of Crosara by Sergio Los: Reassessing a pioneering thermally efficient building. Building Research & Information, 52(3), pp. 358-372. ISSN 0961-3218

Pongiglione, M; Calderini, C and Guy, G B (2017) A new demountable seismic-resistant joint to improve industrial building reparability. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 251-262. ISSN 1759-5916

Poorisat, T.; Aigwi, I. E.; Doan, D. T. and GhaffarianHoseini, A. (2026) Integrating energy efficiency, water efficiency and indoor environmental quality towards advancing sustainable building designs and practices in New Zealand: Stakeholders' perspectives. Construction Innovation, 26(9), pp. 79-114. ISSN 1471-4175

Porto Valente, C; Morris, A and Wilkinson, S J (2022) Energy poverty, housing and health: The lived experience of older low-income australians. Building Research & Information, 50(1-2), pp. 6-18. ISSN 0961-3218

Potbhare, V; Syal, M; Arif, M; Khalfan, M M A and Egbu, C (2009) Emergence of green building guidelines in developed countries and their impact on India. Journal of Engineering, Design and Technology, 7(1), pp. 99-121. ISSN 1726-0531

Potseluyko Amobi, L (2021) Improving business and technical operations within timber frame self-build housing sector by applying integrated VR/AR and BIM technologies. PhD thesis, Teesside University, UK.

Prieto, A J; Torres-González, M and Carpio, M (2024) Virtual web-based instruments in the evaluation of functional degradation of heritage timber buildings. Building Research & Information, 52(1-2), pp. 181-193. ISSN 0961-3218

Purushothaman, A and Thirumaran, K (2021) Evaluating the climate-responsive design strategies of vernacular buildings in konearirajapuram village, nagappattinam, India. International Journal of Building Pathology and Adaptation, 39(2), pp. 175-196. ISSN 23984708

Pusceddu, C; Blumberg, G; Salvalai, G and Imperadori, M (2017) The use of building technology to support disaster resilience: The case study of air shelter house. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 139-157. ISSN 1759-5916

Pérez-Bou, S; Kishnani, N and Dutta, A (2024) Human factors for a successful integrated design process in zero energy buildings: Leadership, trust, and goal orientation: A case study in Singapore. Architectural Engineering and Design Management, 20(4), pp. 928-945. ISSN 1745-2007

Qadourah, J A (2024) Evaluating solar-active shading solutions: a study of energy performance in Mediterranean residential architecture. Architectural Engineering and Design Management, 20(5), pp. 1222-1237. ISSN 1745-2007

Qi, J K; Yang, J Y; Oliver Hoon Leh, L; Edwards, R and Jamalunlaili, A (2021) Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD. Smart and Sustainable Built Environment, 10(1), pp. 18-36. ISSN 2046-6099

Qian, Q K (2010) Government's roles and measures needed in China for promoting building energy efficiency (bee). International Journal of Construction Management, 10(4), pp. 119-138. ISSN 1562-3599

Radebe, T B; Huan, Z and Baloyi, J (2021) Simulation of eutectic plates in medium refrigerated transport. Journal of Engineering, Design and Technology, 19(1), pp. 62-80. ISSN 1726-0531

Raduenz, Henrique (2022) On machine learning-based control for energy management in construction machines. PhD thesis, Universidade Federal de Santa Catarina, Brazil.

Rajala, P; Ylä-Kujala, A; Sinkkonen, T and Kärri, T (2025) Operational effectiveness in building renovation business: Best practices for profitable execution. Construction Economics and Building, 25(1), pp. 97-121. ISSN 2204-9029

Rajendran, S (2007) Sustainable construction safety and health rating system. PhD thesis, Oregon State University, USA.

Rajendran, S; Gambatese, J A and Behm, M G (2009) Impact of green building design and construction on worker safety and health. Journal of Construction Engineering and Management, 135(10), pp. 1058-1066. ISSN 0733-9364

Raji, B (2018) Sustainable high-rises: Design strategies for energy-efficient and comfortable tall office buildings in various climates. PhD thesis, Delft University of Technology, Netherlands.

Ramalingam Rethnam, O. and Thomas, A. (2026) A physics-informed deep learning-based urban building thermal comfort modeling and prediction framework for identifying thermally vulnerable building stock. Smart and Sustainable Built Environment, 15(2), pp. 622-648. ISSN 2046-6099

Ramalingam Rethnam, O and Thomas, A (2024) Urban building energy modelling-based framework to analyze the effectiveness of the community-wide implementation of national energy conservation codes. Smart and Sustainable Built Environment, 13(5), pp. 1213-1239. ISSN 2046-6099

Rana, J; Hasan, R; Sobuz, H R and Tam, V W Y (2022) Impact assessment of window to wall ratio on energy consumption of an office building of subtropical monsoon climatic country Bangladesh. International Journal of Construction Management, 22(13), pp. 2528-2553. ISSN 1562-3599

Rana, M J; Hasan, M R and Sobuz, M H R (2022) An investigation on the impact of shading devices on energy consumption of commercial buildings in the contexts of subtropical climate. Smart and Sustainable Built Environment, 11(3), pp. 661-691. ISSN 2046-6099

Rana, M J; Hasan, M R; Sobuz, M H R and Sutan, N M (2021) Evaluation of passive design strategies to achieve nZEB in the corporate facilities: The context of bangladeshi subtropical monsoon climate. International Journal of Building Pathology and Adaptation, 39(4), pp. 619-654. ISSN 23984708

Rashdan, W. and Ashour, A. F. (2026) A conceptual framework linking biophilic interior design to sustainability criteria. Building Research & Information, 54(6), pp. 775-800. ISSN 0961-3218

Ready to deleteÓ Broin, E (2016) Modelling drivers of energy demand in the European union building sector. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Rees, S W; Zhou, Z and Thomas, H R (2006) Multidimensional simulation of earth-contact heat transfer. Building Research & Information, 34(6), pp. 565-572. ISSN 0961-3218

Renger, B C; Birkeland, J L and Midmore, D J (2015) Net-positive building carbon sequestration. Building Research & Information, 43(1), pp. 11-24. ISSN 0961-3218

Reposa Jr, J H (2009) Comparison of usgbc LEED for homes and the nahb national green building program. International Journal of Construction Education and Research, 5(2), pp. 108-120. ISSN 1557-8771

Ribas, D A and Cachim, P (2019) Economic sustainability of buildings: Assessment of economic performance and sustainability index. Engineering, Construction and Architectural Management, 26(1), pp. 2-28. ISSN 0969-9988

Rich, K (2011) Design and construction process of two LEED certified university buildings: A collective case study. PhD thesis, University of Missouri - Columbia, USA.

Rijal, H B; Humphreys, M A and Nicol, J F (2009) Understanding occupant behaviour: The use of controls in mixed-mode office buildings. Building Research & Information, 37(4), pp. 381-396. ISSN 0961-3218

Rispoli, M and Organ, S (2019) The drivers and challenges of improving the energy efficiency performance of listed pre-1919 housing. International Journal of Building Pathology and Adaptation, 37(3), pp. 288-305. ISSN 23984708

Roberts, B M; Allinson, D and Lomas, K J (2023) Evaluating methods for estimating whole house air infiltration rates in summer: Implications for overheating and indoor air quality. International Journal of Building Pathology and Adaptation, 41(1), pp. 45-72. ISSN 23984708

Roberts, C; Bobrova, Y and Marjanovic-Halburd, L (2019) Impacts of energy legislation on organizational motivation: A case study. Building Research & Information, 47(2), pp. 234-244. ISSN 0961-3218

Robertson, C M (2014) The role of crowd-sourced energy performance feedback in low-energy building design and management in the context of industry pressures. PhD thesis, University College London, UK.

Robinson, J and Cole, R J (2015) Theoretical underpinnings of regenerative sustainability. Building Research & Information, 43(2), pp. 133-143. ISSN 0961-3218

Roca-Puigròs, M; Billy, R G; Gerber, A; Wäger, P and Müller, D B (2020) Pathways toward a carbon-neutral Swiss residential building stock. Buildings & Cities, 1(1), pp. 579-593. ISSN 2632-6655

Rockett, P and Hathway, E A (2017) Model-predictive control for non-domestic buildings: A critical review and prospects. Building Research & Information, 45(5), pp. 556-571. ISSN 0961-3218

Rodger, D; Callaghan, N and Thomson, C (2018) Are retrofitted social houses sufficiently reflecting the holistic health and wellbeing requirements of older people? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Rodrigo, N; Perera, S; Senaratne, S and Jin, X (2024) Development of a blockchain-based embodied carbon estimator. Built Environment Project and Asset Management, 14(6), pp. 914-936. ISSN 2044-124X

Rodriguez, B X; Simonen, K; Huang, M and De Wolf, C (2019) A taxonomy for whole building life cycle assessment (WBLCA). Smart and Sustainable Built Environment, 8(3), pp. 190-205. ISSN 2046-6099

Rogers, P (2024) Influence of carbon tax on office buildings in South Africa. PhD thesis, University of Pretoria, South Africa.

Rohdin, P; Dalewski, M and Moshfegh, B (2016) Combining a survey approach and energy and indoor environment auditing in historic buildings. Journal of Engineering, Design and Technology, 14(1), pp. 182-195.

Rosenow, J; Fawcett, T; Eyre, N and Oikonomou, V (2016) Energy efficiency and the policy mix. Building Research & Information, 44(5-6), pp. 562-574. ISSN 0961-3218

Roulet, C A; Flourentzou, F; Foradini, F; Bluyssen, P; Cox, C and Aizlewood, C (2006) Multicriteria analysis of health, comfort and energy efficiency in buildings. Building Research & Information, 34(5), pp. 475-482. ISSN 0961-3218

Roulet, C A; Johner, N; Foradini, F; Bluyssen, P; Cox, C; De Oliveira Fernandes, E; Müller, B and Aizlewood, C (2006) Perceived health and comfort in relation to energy use and building characteristics. Building Research & Information, 34(5), pp. 467-474. ISSN 0961-3218

Roussac, A C and Bright, S (2012) Improving environmental performance through innovative commercial leasing: An Australian case study. International Journal of Law in the Built Environment, 4(1), pp. 6-22. ISSN 1756-1450

Roussac, Andrew Craig (2017) A framework for presenting energy efficiency feedback to operators of buildings. PhD thesis, University of Sydney, Australia.

Rousseau, D and Chen, Y (2001) Sustainability options for China's residential building sector. Building Research & Information, 29(4), pp. 293-301. ISSN 0961-3218

Roza, C (2006) Environmental assessment: The Eden project. PhD thesis, University College London, UK.

Ruokamo, E; Tikkanen, T; Lukkarinen, J and Karhinen, S (2026) Energy retrofits in shared ownership: Exploring motivations in Finnish housing companies. Building Research & Information, 54(3), pp. 289-305. ISSN 0961-3218

Rylander, D (2021) Productivity improvements in construction transport operation through lean thinking and systems of systems. PhD thesis, Malardalen University, Sweden.

Ríos-Fernández, J C (2022) Thermal performance assessment of cool roofs on supermarkets through case analysis in 13 cities. Engineering, Construction and Architectural Management, 29(2), pp. 739-754. ISSN 0969-9988

Sacks, A; Nisbet, A; Ross, J and Harinarain, N (2012) Life cycle cost analysis: A case study of Lincoln on the Lake. Journal of Engineering, Design and Technology, 10(2), pp. 228-254. ISSN 1726-0531

Safari, M (2019) A regenerative approach to development and construction of building energy retrofit projects. PhD thesis, Pennsylvania State University, USA.

Saffar, N (2020) The development of an offsite construction adoption strategic guideline for the Iraqi construction industry. PhD thesis, University of Salford, UK.

Salat, S (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information, 37(5-6), pp. 598-609. ISSN 0961-3218

Salcedo Rahola, T B (2015) Integrated project delivery methods for energy renovation of social housing. PhD thesis, Delft University of Technology, Netherlands.

Salmi, A; Jussila, J and Hämäläinen, M (2022) The role of municipalities in transformation towards more sustainable construction: The case of wood construction in Finland. Construction Management and Economics, 40(11-12), pp. 934-954. ISSN 01446193

Salmio, E and Huuhka, S (2026) Environmental impacts of reclaimed bricks: Comparing different deconstruction methods. Buildings & Cities, 7(1), pp. 323-340. ISSN 2632-6655

Samo, S R (1999) Energy conservation in UK housing and the effect of building regulations. PhD thesis, University of Manchester, UK.

Sanchez, B and Haas, C (2018) Capital project planning for a circular economy. Construction Management and Economics, 36(6), pp. 303-312. ISSN 01446193

Sanchez-Guevara, C; Fernandez, A S and Aja, A H (2015) Income, energy expenditure and housing in Madrid: Retrofitting policy implications. Building Research & Information, 43(6), pp. 737-749. ISSN 0961-3218

Sandberg, N H; Bergsdal, H and Brattebø, H (2011) Historical energy analysis of the Norwegian dwelling stock. Building Research & Information, 39(1), pp. 1-15. ISSN 0961-3218

Sanderford, A R; McCoy, A P and Keefe, M J (2018) Adoption of energy star certifications: Theory and evidence compared. Building Research & Information, 46(2), pp. 207-13. ISSN 0961-3218

Saraiva, T S (2020) Adaptation of the methodology SBTool for sustainability assessment of high school buildings in Portugal - SAHSBPT. PhD thesis, Universidade do Minho, Portugal.

Sarran, L; Lex, S W and Wærsted, E H (2022) Comfort and technical installations in Danish low-energy homes: Reconnecting design intention and domestic perceptions. Building Research & Information, 50(3), pp. 308-324. ISSN 0961-3218

Sathkumara, T M; Waidyasekara, A S and Victar, H C (2025) The feasibility of transparent solar panels for high-rise building façade in Sri Lanka. Construction Innovation, 25(4), pp. 1127-1152. ISSN 1471-4175

Sattary, S and Thorpe, D (2012) Optimizing embodied energy of building construction through bioclimatic principles. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Sayah, Z; Kazar, O; Lejdel, B; Laouid, A and Ghenabzia, A (2021) An intelligent system for energy management in smart cities based on big data and ontology. Smart and Sustainable Built Environment, 10(2), pp. 169-192. ISSN 2046-6099

Schade, J (2013) A design process perspective on the energy performance of buildings. PhD thesis, Luleå University of Technology, Sweden.

Schamne, Annelise Nairne (2022) Building information modeling in construction waste management: Proposal of a conceptual model in the IFC standard. PhD thesis, Universidade Tecnológica Federal do Paraná, Brazil.

Schoenefeldt, H (2019) The House of Commons: A precedent for post-occupancy evaluation. Building Research & Information, 47(6), pp. 635-665. ISSN 0961-3218

Schweber, L. and Green, M. (2026) Negotiating net-zero carbon: An ant analysis of two buildings. Buildings & Cities, 7(1), pp. 791-807. ISSN 2632-6655

Scott, J R; Edge, M; Laing, R and Martin, P (2004) Optimising the relationship between passive solar design of new housing and the economics of construction and land value. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Scrase, J I (2001) Curbing the growth in UK commercial energy consumption. Building Research & Information, 29(1), pp. 51-61. ISSN 0961-3218

Seddiki, M; Bennadji, A and Tehami, M (2020) Barriers to the adoption of energy efficiency measures in Mostaganem, Algeria. Journal of Construction in Developing Countries, 25(2), pp. 39-61. ISSN 1823-6499

Sehrawy, A; Amoudi, O; Tong, M and Callaghan, N (2022) Mobilising theory and practice for the enhancement of building information modelling based building sustainability assessment: An exploratory study and a conceptual framework. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Semasinghe, K.; Perera, S.; Nanayakkara, S.; Jin, X. and Samaratunga, M. (2026) Artificial intelligence-based strategies for indoor environmental quality optimisation. Smart and Sustainable Built Environment, pp. 1-31. ISSN 2046-6099

Senevirathne, M; Priyankara, H A C; Amaratunga, D; Haigh, R; Weerasinghe, N; Nawaratne, C and Kaklauskas, A (2021) A capacity needs assessment to integrate mooc-based climate change education with the higher education institutions in Europe and developing countries in Asia: Findings of the focused group survey in pchei under the beck project. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 515-527. ISSN 1759-5916

Sertyesilisik, B (2017) A preliminary study on the regenerative construction project management concept for enhancing sustainability performance of the construction industry. International Journal of Construction Management, 17(4), pp. 293-309. ISSN 1562-3599

Seun Oke, O.; Aliu, J. O.; Chukwuma, N. K. and Oke, A. E. (2026) Uncovering the drivers of green wall system adoption in construction: Insights from a developing country. International Journal of Construction Management, 26(10), pp. 2101-2115. ISSN 1562-3599

Shafique, F (2020) Transformational leadership for sustainability in architecture engineering and construction project teams. PhD thesis, Michigan State University, USA.

Shafique, F and Mollaoglu, S (2022) Shared transformational leadership for green architecture engineering and construction project teams: A study of LEED projects. Journal of Construction Engineering and Management, 148(12): 04022137, ISSN 0733-9364

Shan, B; Chen, B; Wen, J and Xiao, Y (2023) Thermal performance of cross-laminated timber (CLT) and cross-laminated bamboo and timber (clbt) panels. Architectural Engineering and Design Management, 19(5), pp. 511-530. ISSN 1745-2007

Shao, B; Meng, J and Che, W (2025) Long-term energy usage prediction in public buildings using aggregated modal decomposition and gru. Journal of Construction Engineering and Management, 151(8): 04025092, ISSN 0733-9364

Shapiro, S (2016) The realpolitik of building codes: Overcoming practical limitations to climate resilience. Building Research & Information, 44(5-6), pp. 490-506. ISSN 0961-3218

Shari, Zalina (2011) Development of a sustainability assessment framework for Malaysian office buildings using a mixed-methods approach. PhD thesis, University of Adelaide, Australia.

Shashwat, S; Zingre, K and Thurairajah, N (2022) Enhancing building energy efficiency estimation by integrating microclimate conditions. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Shaw, C (2023) Understanding the need for a comparative framework when selecting an appropriate building technology for sustainable human settlements in South Africa. PhD thesis, University of Pretoria, South Africa.

Shepley, M M; Peditto, K; Sachs, N A; Pham, Y; Barankevich, R; Crouppen, G and Dresser, K (2022) Staff and resident perceptions of mental and behavioural health environments. Building Research & Information, 50(1-2), pp. 89-104. ISSN 0961-3218

Sheth, A; Price, A D F; Glass, J and Achour, N (2008) Reviewing the sustainability of existing healthcare facilities. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Shi, Q and Wang, Z (2025) Spatial-temporal evaluation of total-factor energy efficiency in Chinese construction industry based on three-stage super-efficiency sbm-DEA model. Engineering, Construction and Architectural Management, 32(9), pp. 5716-5742. ISSN 0969-9988

Shi, J (2017) A quantitative method for assessing home envelope's energy performance using measured data. International Journal of Construction Management, 17(2), pp. 89-99. ISSN 1562-3599

Shiers, D; Lavers, A and Keeping, M (2007) Indicators of the impact of environmental factors on UK construction law: Developments in the new millennium. Construction Management and Economics, 25(7), pp. 821-829. ISSN 1466433X

Shipworth, D (2002) A stochastic framework for embodied greenhouse gas emissions modelling of construction materials. Building Research & Information, 30(1), pp. 16-24. ISSN 0961-3218

Shirani, F; O’sullivan, K; Henwood, K; Hale, R and Pidgeon, N (2022) Living in an active home: Household dynamics and unintended consequences. Buildings & Cities, 3(1), pp. 589-604. ISSN 2632-6655

Short, C A and Al-Maiyah, S (2009) Design strategy for low-energy ventilation and cooling of hospitals. Building Research & Information, 37(3), pp. 264-292. ISSN 0961-3218

Short, C A; Cook, M and Lomas, K J (2009) Delivery and performance of a low-energy ventilation and cooling strategy. Building Research & Information, 37(1), pp. 1-30. ISSN 0961-3218

Short, C A and Lomas, K J (2007) Exploiting a hybrid environmental design strategy in a US continental climate. Building Research & Information, 35(2), pp. 119-143. ISSN 0961-3218

Shove, E (2018) What is wrong with energy efficiency? Building Research & Information, 46(7), pp. 779-789. ISSN 0961-3218

Si, J (2017) Green retrofit of existing non-domestic buildings as a multi criteria decision making process. PhD thesis, University College London, UK.

Simons, B.; Akubah, J. T.; Amos-Abanyie, S.; Adade-Boateng, A. O. and Simpeh, E. K. (2026) A daylight performance analysis of a design block fenestrated classroom in Ghana: A point-in-time versus simulated analysis. International Journal of Building Pathology and Adaptation, 44(4), pp. 1013-1029. ISSN 2398-4708

Simpeh, F.; Appau, M. W. and Attakora-Amaniampong, E. (2026) Technological compliance and usefulness of heating and cooling systems in on-campus student housing in Ghana. Smart and Sustainable Built Environment, 15(3), pp. 1068-1084. ISSN 2046-6099

Simpson, K; Janda, K B and Owen, A (2020) Preparing 'middle actors' to deliver zero-carbon building transitions. Buildings & Cities, 1(1), pp. 610-624. ISSN 2632-6655

Simpson, K; Murtagh, N and Owen, A (2021) Domestic retrofit: Understanding capabilities of micro-enterprise building practitioners. Buildings & Cities, 2(1), pp. 449-466. ISSN 2632-6655

Simpson, S; Banfill, P; Haines, V; Mallaband, B and Mitchell, V (2016) Energy-led domestic retrofit: Impact of the intervention sequence. Building Research & Information, 44(1), pp. 97-115. ISSN 0961-3218

Singh, A; Thanu, H P and Deepak, M D (2025) Energy-saving strategies to convert existing campus to smart campus: a conservative method analysis. International Journal of Construction Management, 25(6), pp. 718-727. ISSN 1562-3599

Singh Rajput, T and Thomas, A (2023) Optimizing passive design strategies for energy efficient buildings using hybrid artificial neural network (ann) and multi-objective evolutionary algorithm through a case study approach. International Journal of Construction Management, 23(13), pp. 2320-2332. ISSN 1562-3599

Siva, J; Gajendran, T; Toinpre, O and Vaughan, J (2025) Driving the zero-carbon construction strategy: Key barriers and enablers. Built Environment Project and Asset Management, 15(3), pp. 380-398. ISSN 2044-124X

Skea, J (2012) Research and evidence needs for decarbonisation in the built environment: A UK case study. Building Research & Information, 40(4), pp. 432-445. ISSN 0961-3218

Smale, R; Spaargaren, G and van Vliet, B (2019) Householders co-managing energy systems: Space for collaboration? Building Research & Information, 47(5), pp. 585-597. ISSN 0961-3218

Smiley J, D A F S (2013) Analysing the discourses surrounding change and reform in the construction sector: The need for a marriage between critical theory and a socio-historical cultural perspective. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Sole, T and Wagner, C (2018) Understanding domestic fuel use practices in an urban township. Building Research & Information, 46(2), pp. 220-11. ISSN 0961-3218

Sommerville, J; Craig, N and Charles, A (2011) No-fines homes: The make or break question? In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Son, K; Choi, K; Woods, P and Park, Y J (2012) Urban sustainability predictive model using GIS: Appraised land value versus LEED sustainable site credits. Journal of Construction Engineering and Management, 138(9), pp. 1107-1112. ISSN 0733-9364

Soudbaksh, K; Etminan, M; Hakimazari, M and Salavatian, S (2022) Impacts of window factors and building orientation on energy consumption in residential buildings of humid temperate climatic zone in Iran. Journal of Construction in Developing Countries, 27(2), pp. 235-262. ISSN 1823-6499

Spence, A; Goulden, M; Leygue, C; Banks, N; Bedwell, B; Jewell, M; Yang, R and Ferguson, E (2018) Digital energy visualizations in the workplace: The e-genie tool. Building Research & Information, 46(3), pp. 272-283. ISSN 0961-3218

Sprau Coulter, T L (2014) Improving energy audit process and report outcomes through planning initiatives. PhD thesis, Pennsylvania State University, USA.

Srivastava, M (2020) Cooperative learning in design studios: A pedagogy for net-positive performance. Buildings & Cities, 1(1), pp. 594-609. ISSN 2632-6655

Ssenyimba, S; Kigozi, J; Tumutegyereize, P; Muyonga, J H and Mutumba, R (2022) Design and evaluation of a refractance window lab-scale dryer. Journal of Engineering, Design and Technology, 20(6), pp. 1499-1518. ISSN 1726-0531

Steadman, P; Evans, S; Liddiard, R; Godoy-Shimizu, D; Ruyssevelt, P and Humphrey, D (2020) Building stock energy modelling in the UK: The 3DStock method and the London building stock model. Buildings & Cities, 1(1), pp. 100-119. ISSN 2632-6655

Steemers, K; Baker, N; Crowther, D; Dubiel, J and Nikolopoulou, M (1998) Radiation absorption and urban texture. Building Research & Information, 26(2), pp. 103-112. ISSN 0961-3218

Stephen, S.; Bello, J.; Aigbavboa, C.; Oke, A. E.; Adekunle, S. and Tambwe, O. (2026) Bibliometric review of gyroscopic mechanisms for adaptive indoor environmental quality control in buildings. Built Environment Project and Asset Management, pp. 1-17. ISSN 2044-124X

Sterner, E (2002) Green procurement of buildings: Estimation of environmental impact and life-cycle cost. PhD thesis, Luleå University of Technology, Sweden.

Stevenson, F and Baborska-Narozny, M (2018) Housing performance evaluation: Challenges for international knowledge exchange. Building Research & Information, 46(5), pp. 501-512. ISSN 0961-3218

Stojanovic, V; Falconer, R; Blackwood, D; Paterson, G; Fleming, M and Bell, S (2014) Interactive visualisation of heat loss and gain for early-stage energy appraisal of the built environment. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Stojanovic, V; Falconer, R; Isaacs, J; Gilmour, D and Blackwood, D (2013) Interactive visualisation to support sustainability assessment in land use scenario planning. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Struck, C (2012) Uncertainty propagation and sensitivity analysis techniques in building performance simulation to support conceptual building and system design. PhD thesis, Eindhoven University of Technology, Netherlands.

Stundon, D; Spillane, J; Lim, J P B; Tansey, P and Tracey, M (2015) Building information modelling energy performance assessment on domestic dwellings: A comparative study. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Sullivan, K T and Oates, H D (2012) Analysis of Arizona's LEED for new construction population's credits. Journal of Construction Engineering and Management, 138(12), pp. 1386-1393. ISSN 0733-9364

Summa, S.; Mircoli, A.; Potena, D.; Ulpiani, G.; Diamantini, C. and Di Perna, C. (2022) Combining artificial intelligence and building engineering technologies towards energy efficiency: The case of ventilated façades. Construction Innovation, 24(7), pp. 44-64. ISSN 1471-4175

Summerfield, A J; Lowe, R J and Oreszczyn, T (2010) Two models for benchmarking UK domestic delivered energy. Building Research & Information, 38(1), pp. 12-24. ISSN 0961-3218

Sunikka, M (2006) Energy efficiency and low-carbon technologies in urban renewal. Building Research & Information, 34(6), pp. 521-533. ISSN 0961-3218

Sunikka-Blank, M; Galvin, R and Behar, C (2018) Harnessing social class, taste and gender for more effective policies. Building Research & Information, 46(1), pp. 114-126. ISSN 0961-3218

Suresh, N S; Kumar, M and Arul Daniel, S (2020) Multi-agent strategy for low voltage DC supply for a smart home. Smart and Sustainable Built Environment, 9(2), pp. 73-90. ISSN 2046-6099

Svec, P; Berkebile, R and Todd, J A (2012) REGEN: Toward a tool for regenerative thinking. Building Research & Information, 40(1), pp. 81-94. ISSN 0961-3218

Svensson, I and Gluch, P (2022) Materiality in action: The role of objects in institutional work. Construction Management and Economics, 40(1), pp. 41-55. ISSN 01446193

Svensson, I and Loöwstedt, M (2019) Navigating the logics of changing public facilities management. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Swan, W; Fitton, R; Smith, L; Abbott, C and Smith, L (2017) Adoption of sustainable retrofit in UK social housing 2010-2015. International Journal of Building Pathology and Adaptation, 35(5), pp. 456-469.

Sweetnam, T; Spataru, C; Barrett, M and Carter, E (2019) Domestic demand-side response on district heating networks. Building Research & Information, 47(4), pp. 330-343. ISSN 0961-3218

Syal, M; Duah, D; Samuel, S; Mazor, M; Mo, Y and Cyr, T (2014) Information framework for intelligent decision support system for home energy retrofits. Journal of Construction Engineering and Management, 140(1): 04013030, ISSN 0733-9364

Symonds, P; Simpson, C H; Petrou, G; Ferguson, L; Mavrogianni, A and Davies, M (2024) Linking housing, socio-demographic, environmental and mental health data at scale. Buildings & Cities, 5(1), pp. 470-488. ISSN 2632-6655

Szalay, Z (2008) Modelling building stock geometry for energy, emission and mass calculations. Building Research & Information, 36(6), pp. 557-567. ISSN 0961-3218

Szydlik, C C (2014) Identifying and overcoming the barriers to sustainable construction. PhD thesis, Missouri University of Science and Technology, USA.

Sällström Eriksson, L and Lidelöw, S (2025) Maintaining or replacing a building's windows: A comparative life cycle study. International Journal of Building Pathology and Adaptation, 43(4), pp. 766-786. ISSN 2398-4708

Tabatabaei Sameni, S (2019) Overheating investigation in UK social housing flats built to the Passivhaus standard. PhD thesis, Coventry University, UK.

Taher, A H and Elbeltagi, E E (2023) Integrating building information modeling with value engineering to facilitate the selection of building design alternatives considering sustainability. International Journal of Construction Management, 23(11), pp. 1886-1901. ISSN 1562-3599

Tainter, J A (2012) Regenerative design in science and society. Building Research & Information, 40(3), pp. 369-372. ISSN 0961-3218

Talvitie, I; Amiri, A and Junnila, S (2024) Spatiotemporal evaluation of embodied carbon in urban residential developmentSpatiotemporal evaluation of embodied carbon in urban residential development. Buildings & Cities, 5(1), pp. 704-722. ISSN 2632-6655

Tam, V W Y; Liu, L and Le, K N (2023) Modelling and quantitation of embodied, operational and mobile energies of buildings: A holistic review from 2012 to 2021. Engineering, Construction and Architectural Management, 30(9), pp. 4045-4079. ISSN 0969-9988

Tangwe, S L; Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(4), pp. 739-751.

Tanko, B L; Essah, E A; Elijah, O; Zakka, W P and Klufallah, M (2023) Bibliometric analysis, scientometrics and metasynthesis of internet of things (IoT) in smart buildings. Built Environment Project and Asset Management, 13(5), pp. 646-665. ISSN 2044-124X

Tanko, B L; Zakka, W P and Heng, W N (2024) BIM in the Malaysian construction industry: A scientometric review and case study. Engineering, Construction and Architectural Management, 31(3), pp. 1165-1186. ISSN 0969-9988

Taranu, V; Verbeeck, G and Nuyts, E (2020) Upgrading the energy label for dwellings in Flanders: An example of a behaviourally informed policy tool. Building Research & Information, 48(1), pp. 18-33. ISSN 0961-3218

Tavares, V M M (2022) Life cycle assessment of prefabricated buildings towards a building stock approach. PhD thesis, Universidade de Coimbra, Portugal.

Taylor, J; Simpson, C H; Vanhatalo, J; Sohail, H; Brousse, O and Heaviside, C (2025) Analysing cold-climate urban heat islands using personal weather station data. Buildings & Cities, 6(1), pp. 182-200. ISSN 2632-6655

Taylor, S; Fan, D and Rylatt, M (2014) Enabling urban-scale energymodelling: A new spatial approach. Building Research & Information, 42(1), pp. 4-16. ISSN 0961-3218

Teixeira, Carla Fernanda Barbosa (2013) Analysis thermal performance of fiber cement tiles treated with white coatings and submitted to water spraying. PhD thesis, Universidade Estadual de Campinas, Brazil.

Tejero-González, A; DeFreitas-Barros-Galvão, V M; Zarzuelo-Sánchez, A M and SanJosé-Alonso, J F (2021) Energy use optimization in ventilation of operating rooms during inactivity periods. Building Research & Information, 49(3), pp. 308-324. ISSN 0961-3218

Tennakoon, G A; Waidyasekara, A and Ekanayake, B J (2020) Revisiting the role of professionals in designing buildings with low embodied and operational energy. Built Environment Project and Asset Management, 10(1), pp. 110-123. ISSN 2044-124X

Teo, E A L and Lin, G (2012) Factors affecting adaptation potential for public housing in Singapore: Decision makers' perspective. International Journal of Construction Management, 12(3), pp. 63-84. ISSN 1562-3599

Terry, N and Palmer, J (2016) Trends in home computing and energy demand. Building Research & Information, 44(2), pp. 175-187. ISSN 0961-3218

Thiruvenghadam, T S and Prakash, A (2025) Emerging paradigms and practices in construction equipment management. Journal of Construction Engineering and Management, 151(5): 03125003, ISSN 0733-9364

Thodelius, C (2018) Rethinking injury events: Explorations in spatial aspects and situational prevention strategies. PhD thesis, Chalmers University of Technology, Sweden.

Thomas, L; Woods, A; Powles, R; Kalali, P and Wilkinson, S (2022) Residential geothermal air-conditioning: Inhabitants' comfort, behaviour and energy use. Buildings & Cities, 3(1), pp. 226-249. ISSN 2632-6655

Thompson, M J (2023) Environmental sustainability of small wastewater treatment systems and pathways for improvement. PhD thesis, University of Nebraska - Lincoln, USA.

Thomsen, J; Berker, T; Lappegard Hauge, Å; Denizou, K; Wågø, S and Jerkø, S (2013) The interaction between building and users in passive and zero-energy housing and offices:The role of interfaces, knowledge and user commitment. Smart and Sustainable Built Environment, 2(1), pp. 43-59. ISSN 2046-6099

Thomson, C S and El-Haram, M A (2019) Is the evolution of building sustainability assessment methods promoting the desired sharing of knowledge amongst project stakeholders? Construction Management and Economics, 37(8), pp. 433-460. ISSN 01446193

Tian, L; Stuart, G and Ozawa-Meida, L (2026) Smart faces: Using communication strategies to optimize technical information flow in middle-out facilities management. Building Research & Information, 54(1), pp. 44-58. ISSN 0961-3218

Tiellemans, N; Kemperman, A; Maussen, S and Arentze, T (2022) The influence of group decision-making on residents' preferences for sustainable energy measures of dwellings. Building Research & Information, 50(4), pp. 410-423. ISSN 0961-3218

Tiew, S Y (2025) Improving professional development through building contract administration (bca) framework of housing projects for graduate architects. Engineering, Construction and Architectural Management, 32(8), pp. 5272-5290. ISSN 0969-9988

Tiew, S Y (2025) A construction contract administration (cca) framework for graduate architects' professional development. Engineering, Construction and Architectural Management, 32(12), pp. 8056-8072. ISSN 0969-9988

Tighnavard Balasbaneh, A and Ramadan, B S (2026) Integrating three pillars of sustainability for evaluating the modular construction building. Construction Innovation, 26(2), pp. 328-352. ISSN 1471-4175

Tilde, A (2023) An investigation of energy saving behaviour for residential buildings in Nigeria. PhD thesis, University of Salford, UK.

Tillson, A A; Oreszczyn, T and Palmer, J (2013) Assessing impacts of summertime overheating: Some adaptation strategies. Building Research & Information, 41(6), pp. 652-661. ISSN 0961-3218

Tinarwo, B; Rahimian, F and Abi Ghanem, D (2025) Towards a trajectory for sustainable policies and market strategies governing building lifecycle energy performance. Smart and Sustainable Built Environment, 14(1), pp. 140-162. ISSN 2046-6099

Tokede, O; Udawatta, N and Luther, M (2018) Retrofitting heritage office buildings in the UK: A case study. Built Environment Project and Asset Management, 8(1), pp. 39-50. ISSN 2044-124X

Tokede O, S B B A (2013) Preserving continuity in whole-life cost models for net-zero carbon buildings. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Tomrukcu, G; Kizildag, H; Avgan, G; Dal, O; Ganic Saglam, N; Ozdemir, E and Ashrafian, T (2026) A systematic approach to manual calibration and validation of building energy simulation. Smart and Sustainable Built Environment, 15(1), pp. 203-230. ISSN 2046-6099

Tonini de Araújo, M; de Souza, H A and Gomes, A P (2022) Computer simulation of moisture transfer in walls: Impacts on the thermal performance of buildings. Architectural Engineering and Design Management, 18(4), pp. 453-472. ISSN 1745-2007

Torcellini, P; Pless, S and Leach, M (2014) A pathway for net-zero energy buildings: Creating a case for zero cost increase. Building Research & Information, 43(1), pp. 25-33. ISSN 0961-3218

Tran, C N N; Pham, P T; Tran, T T M; Tam, V W Y and Illankoon, I M C S (2025) A practical approach to promoting sustainable development in the construction industry through the use of the LOTUS-Vietnamese green-building assessment tool. International Journal of Construction Management, 25(11), pp. 1288-1299. ISSN 1562-3599

Tran, C N N; Tam, V W Y; Le, K N and Illankoon, I M C S (2023) Environmental impacts assessment for Australian buildings: Thermal resistance and environmental impacts relationship. International Journal of Construction Management, 23(2), pp. 243-252. ISSN 1562-3599

Tseng, C-H (2006) Safety performance analyzer for constructed environments (SPACE). PhD thesis, Ohio State University, USA.

Tunefalk, M; Legner, M and Leijonhufvud, G (2020) Long-term effects of additional insulation of building façades in Sweden: Towards a holistic approach. International Journal of Building Pathology and Adaptation, 38(2), pp. 374-385. ISSN 23984708

Tunji-Olayeni, P; Kajimo-Shakantu, K and Osunrayi, E (2020) Practitioners' experiences with the drivers and practices for implementing sustainable construction in Nigeria: A qualitative assessment. Smart and Sustainable Built Environment, 9(4), pp. 443-465. ISSN 2046-6099

Tunji-Olayeni, P F; Kajimo–Shakantu, K; Ayodele, T O and Philips, B I (2023) Students' perception of sustainable construction: Accelerating progress towards construction education for sustainable development. International Journal of Construction Management, 23(2), pp. 276-285. ISSN 1562-3599

Turcu, C (2017) Unequal spatial distribution of retrofits in bucharest's apartment buildings. Building Research & Information, 45(8), pp. 892-909. ISSN 0961-3218

Turner, J; Daniel, E I and Chinyio, E (2024) The race to net zero: Is the UK falling behind in research to other countries when it comes to sustainability in residential housing? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Uddin, M N; Anwer, S; Wei, H H; Chi, H L; Ni, M and Tamanna, N (2021) Energy efficient behavioural trends in residential sectors for low-income cultural background: A case-study of slums in chittagong, Bangladesh. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Ulrich de Alencastro, J P (2019) The impact of quality management on the thermal performance of social housing in the United Kingdom. PhD thesis, University of Plymouth, UK.

Ur Rehman, H S; Raza, M A; Masood, R; Khan, M A; Alamgir, S; Javed, M A; Roy, K and Lim, J B P (2023) A multi-facet BIM based approach for green building design of new multi-family residential building using LEED system. International Journal of Construction Management, 23(12), pp. 2024-2038. ISSN 1562-3599

Usman, A M and Abdullah, K (2024) Development of comprehensive energy usage impact and carbon footprint parameters for green building life cycle assessment. Journal of Engineering, Design and Technology, 22(4), pp. 1057-1081. ISSN 1726-0531

Utkucu, D and Sözer, H (2025) Modeling a mixed-mode cooling system with correlation to operable building facade openings: Mathematical logic integration of computational fluid dynamics and energy models. Journal of Construction Engineering and Management, 151(6): 04025054, ISSN 0733-9364

Vakili-Ardebili, A and Boussabaine, A H (2007) Creating value through sustainable building design. Architectural Engineering and Design Management, 3(2), pp. 83-92. ISSN 1745-2007

Vakili-Ardebili, A and Boussabaine, A H (2010) Ecological building design determinants. Architectural Engineering and Design Management, 6(2), pp. 111-131. ISSN 1745-2007

Vale, B and Vale, R (2010) Domestic energy use, lifestyles and poe: Past lessons for current problems. Building Research & Information, 38(5), pp. 578-588. ISSN 0961-3218

Van Dam, S S; Bakker, C A and Van Hal, J D M (2010) Home energy monitors: Impact over the medium-term. Building Research & Information, 38(5), pp. 458-469. ISSN 0961-3218

Van Hove, M Y C; Deurinck, M; Lameire, W; Laverge, J; Janssens, A and Delghust, M (2023) Large-scale statistical analysis and modelling of real and regulatory total energy use in existing single-family houses in flanders. Building Research & Information, 51(2), pp. 203-222. ISSN 0961-3218

Van Timmeren, A and Sidler, D (2007) The sustainable implant: Decentralised sanitation and energy reuse (Desaer) in the built environment. Construction Innovation, 7(1), pp. 22-37. ISSN 1471-4175

Van der Heijden, J (2016) The new governance for low-carbon buildings: Mapping, exploring, interrogating. Building Research & Information, 44(5-6), pp. 575-584. ISSN 0961-3218

Victar, H C and Waidyasekara, K G A S (2026) Circular economy strategies for minimising construction waste in Sri Lanka: Focus on the preconstruction stage. Construction Innovation, 26(3), pp. 814-842. ISSN 1471-4175

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Victoria, M F (2017) Developing decision support models for early stage embodied carbon management in buildings. PhD thesis, Northumbria University, UK.

Visscher, H; Meijer, F; Majcen, D and Itard, L (2016) Improved governance for energy efficiency in housing. Building Research & Information, 44(5-6), pp. 552-561. ISSN 0961-3218

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Vorobjev, O.; Uotila, U.; Joensuu, T. and Saari, A. (2026) Design for disassembly: A review of public policy proposals. Buildings & Cities, 7(1), pp. 775-790. ISSN 2632-6655

Wade, F; Murtagh, N and Hitchings, R (2018) Managing professional jurisdiction and domestic energy use. Building Research & Information, 46(1), pp. 42-53. ISSN 0961-3218

Wade, F; Shipworth, M and Hitchings, R (2017) How installers select and explain domestic heating controls. Building Research & Information, 45(4), pp. 371-383. ISSN 0961-3218

Wagle, S; Gopalakrishnan, B; Li, H; Liu, Z; Chaudhari, S and Sundaramoorthy, S (2024) Simulating energy performance of buildings: a study using eQUEST and Energy Star® portfolio manager. Architectural Engineering and Design Management, 20(5), pp. 997-1018. ISSN 1745-2007

Waibel, C (2018) Simulation-based optimization of buildings and multi-energy systems. DSc thesis, ETH Zürich, Switzerland.

Walker, G; Brown, S and Neven, L (2016) Thermal comfort in care homes: Vulnerability, responsibility and 'thermal care'. Building Research & Information, 44(2), pp. 135-146. ISSN 0961-3218

Wallhagen, M and Glaumann, M (2011) Design consequences of differences in building assessment tools: A case study. Building Research & Information, 39(1), pp. 16-33. ISSN 0961-3218

Wan, Shiyu (2022) Energy performance contracts in imperfect markets: A study on energy efficiency retrofits of commercial buildings in China. PhD thesis, University of Technology Sydney, Australia.

Wang, J.; Dai, J.; Wang, X.; Gao, W.; Yao, X.; Dewancker, B. J. and Wang, Y. (2026) The role of health-oriented environmental design and personal attributes in promoting workplace healthy behaviours. Building Research & Information, 54(4), pp. 429-446. ISSN 0961-3218

Wang, S.; Hu, X.; Wei, A.; Yang, W. and Cui, Q. (2026) The non-linear impact of industrial agglomeration on green total factor productivity in construction: Moderating role of construction consulting services. Engineering, Construction and Architectural Management, 33(15), pp. 458-480. ISSN 0969-9988

Wang, Y; Li, Y and Zhuang, J (2025) Research on the green development path of prefabricated building industry based on intelligent technology. Engineering, Construction and Architectural Management, 32(12), pp. 8390-8422. ISSN 0969-9988

Wang, C; Shen, W; Cui, B and Zeng, Y (2025) Numerical study on the thermal environment of the vertical greening system based on infrared thermal imaging. Architectural Engineering and Design Management, 21(2), pp. 315-337. ISSN 1745-2007

Wang, J P W (2015) A system framework of the cost and energy relationship of zero carbon buildings from the life cycle perspective. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Wang, Y (2022) Monitoring, modelling and analysis of occupants' operation of windows, use of air purifiers and smart air quality control in low-energy residential buildings. PhD thesis, University College London, UK.

Wao, J O (2014) Value engineering methodology to improve building sustainability outcomes. PhD thesis, University of Florida, USA.

Warren-Myers, G and McRae, E (2017) Volume home building: The provision of sustainability information for new homebuyers. Construction Economics and Building, 17(2), pp. 24-40. ISSN 2204-9029

Watchman, M; Demers, C M H and Potvin, A (2022) Biophilia in school buildings: Towards a simplified assessment method based on spatial geometry. Architectural Engineering and Design Management, 18(4), pp. 434-452. ISSN 1745-2007

Watson, S (2004) Improving the implementation of environmental strategies in the design of buildings: Towards a life-cycle based, front loaded, framework for building environmental assessment during design. PhD thesis, University of Queensland, Australia.

Wedding, G C (2008) Understanding sustainability in real estate: A focus on measuring and communicating success in green building. PhD thesis, University of North Carolina at Chapel Hill, USA.

Weerasinghe, A S; Rasheed, E O and Rotimi, J O B (2021) A dilemma between building indoor environment preferences and occupant energy behaviours. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Wei, B (2021) Value creation, value sensing, value delivery, and value capturing mechanism of green building: A value network. PhD thesis, Temple University, USA.

Wei, Y (2019) Data-driven approaches for analysis of building energy consumption and indoor occupancy behavior. PhD thesis, University of Nottingham, UK.

Weinsziehr, T; Grossmann, K; Gröger, M and Bruckner, T (2017) Building retrofit in shrinking and ageing cities: A case-based investigation. Building Research & Information, 45(3), pp. 278-292. ISSN 0961-3218

Wenninger, S (2022) Data-driven support and risk modeling for a successful heat transition in the building sector. PhD thesis, Universitaet Bayreuth, Germany.

Westerholm, N.; Tuure, A.; Pajunen, S. and Kuittinen, M. (2026) Comparing technical disassembly potential methods for concrete and timber buildings. Buildings & Cities, 7(1), pp. 633-652. ISSN 2632-6655

White, A (2020) Operational performance and delivery structure of hospital facilities: empirical relationship analyses in Ontario, Canada. DBA thesis, University of Manchester, UK.

Williams, K (2012) Regenerative design as a force for change: Thoughtful, optimistic and evolving ideas. Building Research & Information, 40(3), pp. 361-364. ISSN 0961-3218

Williamson, T; Soebarto, V and Radford, A (2010) Comfort and energy use in five Australian award-winning houses: Regulated, measured and perceived. Building Research & Information, 38(5), pp. 509-529. ISSN 0961-3218

Wingrove, K; Heffernan, E and Daly, D (2024) Increased home energy use: unintended outcomes of energy efficiency focused policy. Building Research & Information, 52(5), pp. 577-595. ISSN 0961-3218

Winn, K R (2014) Inter-scalar multivariable decision making framework for the architectural envelope. PhD thesis, Rensselaer Polytechnic Institute, USA.

Wong, P S P; Holdsworth, S; Crameri, L and Lindsay, A (2019) Does carbon accounting have an impact on decision-making in building design? International Journal of Construction Management, 19(2), pp. 149-161. ISSN 1562-3599

Woo, J (2021) A new blockchain framework for existing building energy performance measurement, reporting, and verification (MRV): A pathway for the building sector to participate in the carbon credit market. PhD thesis, University of Florida, USA.

Wågø, S and Berker, T (2014) Architecture as a strategy for reduced energy consumption? An in-depth analysis of residential practices' influence on the energy performance of passive houses. Smart and Sustainable Built Environment, 3(3), pp. 192-206. ISSN 2046-6099

Xia, B; Skitmore, M; Wu, P and Chen, Q (2014) How public owners communicate the sustainability requirements of green design-build projects. Journal of Construction Engineering and Management, 140(8): 04014036, ISSN 0733-9364

Xiao, Peichun (2018) Development of colletive intelligence for building energy efficiency. PhD thesis, University of New South Wales, Australia.

Xiong, Yunjie (2020) A BIM-based interoperability platform in support of building operation and energy management. PhD thesis, Virginia Tech, USA.

Xu, Z; Guo, X; Zhao, Y and Liu, X (2023) Performance of CFRP-bolted timber joints with slotted-in corrugated steel plates. Journal of Construction Engineering and Management, 149(12): 04023134, ISSN 0733-9364

Xue, X; Tan, X and Fan, H (2026) Mapping the trajectories of digital technology innovation in the construction industry: An integrated spnp and louvain approach. Engineering, Construction and Architectural Management, 33(1), pp. 477-508. ISSN 0969-9988

Yadollahi, M; Ebrahimi Saryazdi, S M; Shafaat, A and Hafezi, M (2023) Life cycle cost analysis of near zero energy buildings benefited from earth-sheltering. International Journal of Construction Management, 23(15), pp. 2670-2682. ISSN 1562-3599

Yanardag Erdener, H M and Edis, E (2024) The effect of living wall systems' variables on the energy consumption of buildings. Built Environment Project and Asset Management, 14(3), pp. 333-348. ISSN 2044-124X

Yang, Y.; Luo, H. and Adibhesami, M. A. (2026) Climate and performance-driven architectural floorplan optimization using deep graph networks. Engineering, Construction and Architectural Management, 33(3), pp. 2400-2421. ISSN 0969-9988

Yazdani Mehr, S and Wilkinson, S (2018) Technical issues and energy efficient adaptive reuse of heritage listed city halls in Queensland Australia. International Journal of Building Pathology and Adaptation, 36(5), pp. 529-542. ISSN 23984708

Yeganeh, A; McCoy, A P; Reichard, G; Schenk, T and Hankey, S (2021) Green building and policy innovation in the US low-income housing tax credit programme. Building Research & Information, 49(5), pp. 543-560. ISSN 0961-3218

Yeung, H C; Ridwan, T; Tariq, S and Zayed, T (2022) Beam plus implementation in Hong Kong: Assessment of challenges and policies. International Journal of Construction Management, 22(14), pp. 2830-2844. ISSN 1562-3599

Yildirim, K; Lutfi Hidayetoglu, M and Sen, A (2012) Effects on sustainability of various skylight systems in buildings with an atrium. Smart and Sustainable Built Environment, 1(2), pp. 139-152. ISSN 2046-6099

Yimprayoon, C (2012) Energy efficiency design strategies for buildings with grid-connected photovoltaic systems. PhD thesis, University of Michigan, USA.

Yohanis, Y G and Norton, B (1998) Estimating at the earliest stages of design the financial cost and operational energy requirement of buildings. Journal of Financial Management of Property and Construction, 3(2), pp. 41-58. ISSN 1366-4387

York, J G (2009) The entrepreneurial creation of public goods: Evidence from the green building and renewable energy industries. PhD thesis, University of Virginia, USA.

Yun, G Y; Steemers, K and Baker, N (2008) Natural ventilation in practice: Linking facade design, thermal performance, occupant perception and control. Building Research & Information, 36(6), pp. 608-624. ISSN 0961-3218

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zaferanchi, M and Sozer, H (2024) Effectiveness of interventions to convert the energy consumption of an educational building to zero energy. International Journal of Building Pathology and Adaptation, 42(4), pp. 485-509. ISSN 23984708

Zainul Abidin, N and Powmya, A (2025) Identifying barriers in constructing green buildings in Oman: A study on project contractors' experience. Built Environment Project and Asset Management, 15(1), pp. 67-84. ISSN 2044-124X

Zanni, M A; Soetanto, R and Ruikar, K (2017) Towards a BIM-enabled sustainable building design process: Roles, responsibilities, and requirements. Architectural Engineering and Design Management, 13(2), pp. 101-129. ISSN 1745-2007

Zapata-Lancaster, G and Tweed, C (2016) Tools for low-energy building design: An exploratory study of the design process in action. Architectural Engineering and Design Management, 12(4), pp. 279-295. ISSN 1745-2007

Zapata-Poveda, G (2012) Detailed design ethnography: Architects embedding low carbon performance. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Zara, R B; Moro, G N; Martins, R d S V and Giglio, T G F (2025) Application of a decision tree approach to predict energy consumption in lightweight buildings under subtropical climate. Smart and Sustainable Built Environment, 14(7), pp. 2069-2089. ISSN 2046-6099

Zarghami, S A and Ahmad, T (2026) Empirical evaluation of the LEED green building rating system: Exploring limitations through configurational analysis. Building Research & Information, 54(2), pp. 257-272. ISSN 0961-3218

Zari, M P (2012) Ecosystem services analysis for the design of regenerative built environments. Building Research & Information, 40(1), pp. 54-64. ISSN 0961-3218

Zaryoun, M and Hosseini, M (2019) Lightweight fiber-reinforced clay as a sustainable material for disaster resilient architecture of future buildings. Architectural Engineering and Design Management, 15(6), pp. 430-444. ISSN 1745-2007

Zaryoun, M; Hosseini, M and Soleymani, K (2022) Sustainable architecture and earthquake resilience of vernacular zegalli houses in Northern Iran. Engineering, Construction and Architectural Management, 29(2), pp. 1061-1085. ISSN 0969-9988

Zedan, S and Miller, W (2018) Quantifying stakeholders' influence on energy efficiency of housing: Development and application of a four-step methodology. Construction Management and Economics, 36(7), pp. 375-393. ISSN 01446193

Zeng, Q and Pishdad-Bozorgi, P (2025) The evolution of sustainable building rating tools: A systematic literature review. Smart and Sustainable Built Environment, 14(4), pp. 1230-1263. ISSN 2046-6099

Zeng, R; Chini, A; Srinivasan, R S and Jiang, P (2017) Energy efficiency of smart windows made of photonic crystal. International Journal of Construction Management, 17(2), pp. 100-112. ISSN 1562-3599

Zhang, J; Zhou, N; Hinge, A; Feng, W and Zhang, S (2016) Governance strategies to achieve zero-energy buildings in China. Building Research & Information, 44(5-6), pp. 604-618. ISSN 0961-3218

Zhang, K (2020) Energy-saving parameterized design of buildings based on genetic algorithm. International Journal of Building Pathology and Adaptation, 38(5), pp. 785-795. ISSN 23984708

Zhang, S (2022) The development of a low carbon prefabricated house. PhD thesis, University of Nottingham, UK.

Zhang, T (2019) Investigating the effectiveness of BIM-bms integration on managing existing building facilities: A New Zealand educational building case. PhD thesis, Auckland University of Technology, New Zealand.

Zhang, X (2018) Sustainable retrofitting of existing residential buildings at community scale in China. PhD thesis, Cardiff University, UK.

Zhang, Xuan (2025) Coordination and optimization of prefabricated building supply chain for sustainability development. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Zhang, Y; Zhang, M; Gao, F and Li, J (2025) Inverse problem method application in building physics numerical optimization: New insight into ideal envelope properties determination. Architectural Engineering and Design Management, 21(2), pp. 252-267. ISSN 1745-2007

Zhao, B; Yu, Y; Xu, Y and Guo, H (2024) Bamboo as a sustainable construction material for residential buildings in the cold and severe cold regions of China. Architectural Engineering and Design Management, 20(6), pp. 1511-1528. ISSN 1745-2007

Zhao, J; Lam, K P; Biswas, T and Wang, H (2015) An online platform to automate LEED energy performance evaluation and submission process. Construction Innovation, 15(3), pp. 313-332. ISSN 1471-4175

Zhao, X and Pan, W (2017) Co-productive interrelations between business model and zero-carbon building: A conceptual model. Built Environment Project and Asset Management, 7(4), pp. 353-365. ISSN 2044-124X

Zhao, X and Pan, W (2022) The characteristics and evolution of business model for green buildings: A bibliometric approach. Engineering, Construction and Architectural Management, 29(10), pp. 4241-4266. ISSN 0969-9988

Zhu, J; Shi, Q; Zhang, C; Yuan, J; Li, Q and Wang, X (2024) Investigating cooperative strategies in low-carbon public-private partnership projects through evolutionary game. Engineering, Construction and Architectural Management, 31(2), pp. 789-811. ISSN 0969-9988

Zhuravchak, R; Nord, N and Brattebø, H (2022) The effect of building attributes on the energy performance at a scale: An inferential analysis. Building Research & Information, 50(6), pp. 662-680. ISSN 0961-3218

Zimmerman, A and Kibert, C J (2007) Forum: Informing LEED's next generation with the natural step. Building Research & Information, 35(6), pp. 681-689. ISSN 0961-3218

Zu, L and Liao, W (2025) Reinforcement learning-based multiobjective and multiconstraint production scheduling for precast concrete. Journal of Construction Engineering and Management, 151(8): 04025089, ISSN 0733-9364

Zuhaib, S; Manton, R; Hajdukiewicz, M; Keane, M M and Goggins, J (2017) Attitudes and approaches of Irish retrofit industry professionals towards achieving nearly zero-energy buildings. International Journal of Building Pathology and Adaptation, 35(1), pp. 16-40.

Zulu, E; Zulu, S L; Chabala, M; Kavishe, N; Chifunda, C and Musonda, I (2024) Infrastructure design stage considerations for environmental sustainability in Zambia. Journal of Engineering, Design and Technology, 22(3), pp. 836-853. ISSN 1726-0531

de Casas Castro Marins, K R (2014) A method for energy efficiency assessment during urban energy planning. Smart and Sustainable Built Environment, 3(2), pp. 132-152. ISSN 2046-6099

de Souza, L. P.; Melo, A. P.; Triana, M. A. and Lamberts, R. (2026) Thermal resilience and life cycle assessment of social housing: A discussion about limitations in Brazil. Architectural Engineering and Design Management, 22(2), pp. 382-401. ISSN 1745-2007

van Stijn, A (2023) Developing circular building components: Between ideal and feasible. PhD thesis, Delft University of Technology, Netherlands.

van der Bent, H S; van den Brom, P I; Visscher, H J; Meijer, A and Mouter, N (2023) The energy performance of dwellings with heat pumps of Dutch non-profit housing associations. Building Research & Information, 51(2), pp. 192-202. ISSN 0961-3218

van der Linden, K A C; Kurvers, S S R; Raue, A A K and Boerstra, A A C (2007) Indoor climate guidelines in the Netherlands: Developments towards adaptive thermal comfort. Construction Innovation, 7(1), pp. 72-84. ISSN 1471-4175

Öberg, V; Jockwer, R; Goto, Y and Al-Emrani, M (2025) Design for structural adaptation: Economic feasibility of an implementation for Swedish timber buildings. Building Research & Information, 53(6), pp. 759-776. ISSN 0961-3218

Ürge-Vorsatz, D; Harvey, L D D; Mirasgedis, S and Levine, M D (2007) Mitigating CO2 emissions from energy use in the world's buildings. Building Research & Information, 35(4), pp. 379-398. ISSN 0961-3218

Ürge-Vorsatz, D; Koeppel, S and Mirasgedis, S (2007) Appraisal of policy instruments for reducing buildings' CO2 emissions. Building Research & Information, 35(4), pp. 458-477. ISSN 0961-3218