Items with Subject: quality assurance

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abdallah, A M (2021) A study on bridge inspections: Identifying barriers to new practices and providing strategies for change. PhD thesis, Colorado State University, USA.

Abdel-Hamid, M.; Abdelhaleem, H. M. and Abd El-Razek Fathy, A. E. (2025) Assessing the implementation of BIM for enhancing green building certification evaluations. Architectural Engineering and Design Management, 21(5), pp. 1040-1056. ISSN 1745-2007

Abdel-Razek, R H (1998) Factors affecting construction quality in Egypt: Identification and relative importance. Engineering, Construction and Architectural Management, 5(3), pp. 220-227. ISSN 0969-9988

AbdelRazig, Y A (1999) Construction quality assessment: A hybrid decision support model using image processing and neural learning for intelligent defects recognition. PhD thesis, Purdue University, USA.

AbdelRazig, Y A and Chang, L M (2000) Intelligent model for constructed facilities surface assessment. Journal of Construction Engineering and Management, 126(6), pp. 422-432. ISSN 0733-9364

Abdelkhalek, S; Zayed, T and Eltoukhy, A E E (2025) Multifaceted optimization for bridge inspection process. Journal of Construction Engineering and Management, 151(5): 04025034, ISSN 0733-9364

Abdelkhalek, Sherif Ibrahim Farag Mohamed (2022) Managing the inspection process of concrete bridge decks. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Abdirad, H and Nazari, A (2015) Barriers to effective implementation of quality management systems in public design projects in Iran. Architectural Engineering and Design Management, 11(6), pp. 457-474. ISSN 1745-2007

Abdul-Rahman, H (1995) The cost of non-conformance during a highway project: A case study. Construction Management and Economics, 13(1), pp. 23-32. ISSN 01446193

Abdul-Rahman, H (1996) Some observations on the management of quality among construction professionals in the UK. Construction Management and Economics, 14(6), pp. 485-495. ISSN 01446193

Abdul-Rashid, I; Bassioni, H and Bawazeer, F (2007) Factors affecting safety performance in large construction contractors in Egypt. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Abdulla, H S (2016) An investigation on the causes and remedial measures on the delays in the construction industry in the Kingdom of Bahrain. PhD thesis, Glasgow Caledonian University, UK.

Abdullahi, U; Bustani, S A; Hassan, A and Rotimi, F E (2019) Assessing quality management practice in Nigerian construction industry. Journal of Construction Business and Management, 3(2), pp. 17-25. ISSN 2521-0165

Abo Kanon, H (2017) The motivations, possibilities and constrains of flexible housing practices in the UK and Turkey. PhD thesis, Heriot-Watt University, UK.

Abouhamad, M and Zayed, T (2019) Risk-based asset management framework for subway systems. Journal of Construction Engineering and Management, 145(11): 04019071, ISSN 0733-9364

Abu Dabous, S (2008) A decision support methodology for rehabilitation management of concrete bridges. PhD thesis, Concordia University, Canada.

Aburas, M (2020) Critical success factors for implementing ISO 9001 in UK construction projects. PhD thesis, University of Salford, UK.

Ackerman Jr., P J (2014) Condition assessment, indices, and risk-based decision-making for public school infrastructure management. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Adamy, A and Abu Bakar, A H (2021) Developing a building-performance evaluation framework for post-disaster reconstruction: The case of hospital buildings in Aceh, Indonesia. International Journal of Construction Management, 21(1), pp. 56-77. ISSN 1562-3599

Addis, B and Al-Ghamdi, M (1998) The role of technical marketing in effective utilization of quality management in consulting engineering firms. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Adeyeye, K (2024) From product to service–strategies for upscaling smart home performance monitoring. Building Research & Information, 52(1-2), pp. 107-128. ISSN 0961-3218

Adinyira, E; Agyekum, K; Danku, J C; Addison, P and Kukah, A S (2020) Influence of subcontractor risk management on quality performance of building construction projects in Ghana. Journal of Construction in Developing Countries, 25(2), pp. 175-197. ISSN 1823-6499

Adjei, E A (2015) Multi-objective optimisation of building design variables and its impact on office building performance: a case for Ghana. PhD thesis, University of Nottingham, UK.

Adjei-Kumi, T (1997) The development of an intelligent system for visual simulation of construction projects. PhD thesis, University of Strathclyde, UK.

Aftab, U; Hassan, M U; Ullah, F; Nasir, A R and Thaheem, M J (2026) BIM-based search and selection of construction material suppliers: A dedicated framework and prototype. Construction Innovation, 26(3), pp. 892-915. ISSN 1471-4175

Agbulos, A; Mohamed, Y; Al-Hussein, M; Abourizk, S and Roesch, J (2006) Application of lean concepts and simulation analysis to improve efficiency of drainage operations maintenance crews. Journal of Construction Engineering and Management, 132(3), pp. 291-299. ISSN 0733-9364

Agha, R H M (2016) The role of intelligent systems in traditional courtyard houses in Baghdad, Iraq. PhD thesis, University of Newcastle upon Tyne, UK.

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2022) Stair step geometry compliance with standard specifications for safety and usability: A study of selected university buildings in Ghana. International Journal of Building Pathology and Adaptation, 40(1), pp. 20-39. ISSN 23984708

Ahankoob, A.; Abbasnejad, B.; Nazareth, I.; Macasaet, P. and Wong, P. S. (2026) Optimising virtual site assessment process for mounted PV array design: An immersive BIM-based approach for existing buildings. Smart and Sustainable Built Environment, pp. 1-26. ISSN 2046-6099

Ahaotu, S M (2018) Effective implementation of total quality management within the Nigerian construction industry. PhD thesis, University of Salford, UK.

Ahern, E (2022) A framework for improving the process of building certification to enhance energy efficiency: the case of Ireland. DProf thesis, Anglia Ruskin University, UK.

Ahluwalia, S S (2009) A framework for efficient condition assessment of the building infrastructure. PhD thesis, University of Waterloo, Canada.

Ahmad, R K (2000) Developing a proactive safety performance measurement tool (SPMT) for construction sites. PhD thesis, Loughborough University, UK.

Ahmad-Latiffi, A (2012) Performance measurement for construction businesses. PhD thesis, Loughborough University, UK.

Ahmed, M O; Khalef, R; Ali, G G and El-Adaway, I H (2021) Evaluating deterioration of tunnels using computational machine learning algorithms. Journal of Construction Engineering and Management, 147(10): 04021125, ISSN 0733-9364

Ahmed, S M (1993) An integrated total quality management (TQM) model for the construction process. PhD thesis, Georgia Institute of Technology, USA.

Ahmed, S M; Sang, L P and Torbica, Ž M (2003) Use of quality function deployment in civil engineering capital project planning. Journal of Construction Engineering and Management, 129(4), pp. 358-368. ISSN 0733-9364

Ahn, Sang Jun (2019) Transportation framework in panelized construction for residential building. PhD thesis, University of Alberta, Canada.

Aibinu, A and Papadonikolaki, E (2016) BIM implementation and project coordination in design-build procurement. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Ainoo, F N Y (2025) Leveraging big data in AEC decision-making: A governance framework. PhD thesis, Capella University, USA.

Akhimien, N (2022) A framework for incorporating circular economy in the design of energy efficient residential buildings in Nigeria. PhD thesis, Cardiff University, UK.

Akindele, M A (2024) Development and evaluation of portable reduced-complexity air quality models for policy assessment in Africa. PhD thesis, Carnegie Mellon University, USA.

Akintoye, A and Fitzgerald, E (1995) Design and build: A survey of architects' views. Engineering, Construction and Architectural Management, 2(1), pp. 27-44. ISSN 0969-9988

Aksorn, T and Hadikusumo, B H W (2008) Measuring effectiveness of safety programmes in the Thai construction industry. Construction Management and Economics, 26(4), pp. 409-421. ISSN 1466433X

Al Bunni, A (2020) Refurbishment of UK state school buildings: a strategy and framework for BIM-based digital twinning. PhD thesis, De Montfort University, UK.

Al Ghazal, H (2018) Post occupancy evaluation involving end users in Saudi Arabian office buildings through the use of a shortened quality function deployment method. PhD thesis, University of Manchester, UK.

Al Omari, Mohammad K (2025) Application of the AI-enabled unmanned aerial systems in resolving highway construction claims. PhD thesis, University of Illinois at Chicago, USA.

Al-Bizri, S and Gray, C (2014) A decision support framework for hcai risk assessment and design briefing of healthcare facilities. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Al-Fadhala, M M (2002) Uncertainty-based condition assessment of existing concrete structures. PhD thesis, University of Maryland, College Park, USA.

Al-Haddad, S (2020) State transportation agencies: A quantitative study on the use of construction engineering and inspection consultants and their impact on project performance. PhD thesis, University of Colorado at Boulder, USA.

Al-Kaabi, N S (2006) A fuzzy-based construction safety advisor (CSA) for construction safety in the United Arab Emirates. PhD thesis, Ohio State University, USA.

Al-Musleh, A M (2011) Development of a framework for total quality management principles in the construction companies with special reference to the construction companies in the state of Qatar. PhD thesis, Queen Mary University of London, UK.

Al-Mutairi, Y (2015) Development of implementation strategies for offsite construction techniques in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Al-Nakeeb, A A R (2000) An assessment of the effectiveness of quality assurance systems in the construction industry. PhD thesis, University of South Wales, UK.

Al-Saeed, Y; Parn, E; Edwards, D J and Scaysbrook, S (2019) A conceptual framework for utilising BIM digital objects (BDO) in manufacturing design and production: A case study. Journal of Engineering, Design and Technology, 17(5), pp. 960-984. ISSN 1726-0531

Al-Sehali, J (2001) A framework for total quality management in the construction industry in Bahrain. PhD thesis, Loughborough University, UK.

Al-Sinan, M A (2004) TQM and the construction industry: Saudi Arabia: a case study. PhD thesis, City, University of London, UK.

Al-Suleiman, T I and Alatoom, Y I (2024) Development of pavement roughness regression models based on smartphone measurements. Journal of Engineering, Design and Technology, 22(4), pp. 1136-1157. ISSN 1726-0531

Al-Wareh, M (1979) Investigation of the design procedures for buildings of quality in modern architecture, with notes on the relevant contemporary situation in Syria. PhD thesis, University of Sheffield, UK.

Al-Yami, A M H (2008) An integrated approach to value management and sustainable construction during strategic briefing in Saudi construction projects. PhD thesis, Loughborough University, UK.

AlMaian, R Y (2014) A strategic approach to effectively manage supplier quality within the construction industry. PhD thesis, University of Arkansas, USA.

AlMaian, R Y; Needy, K L; Walsh, K D and Alves, T D C L (2016) A qualitative data analysis for supplier quality-management practices for engineer-procure-construct projects. Journal of Construction Engineering and Management, 142(2): 04015061, ISSN 0733-9364

AlMunifi, A A and Almutairi, S (2021) Lessons learned framework for efficient delivery of construction projects in Saudi Arabia. Construction Economics and Building, 21(4), pp. 115-141. ISSN 2204-9029

Alazemi, W (2013) Total quality management within the construction industry of Kuwait: the role of Total Quality Management and its usage. PhD thesis, Loughborough University, UK.

Alazzam, M. and Celoza, A. (2026) Current state of supplier qualification in capital projects: Factors, practices, and industry perspectives. Journal of Construction Engineering and Management, 152(8): 04026111, ISSN 0733-9364

Albano, L D (1992) An axiomatic approach to performance-based design. PhD thesis, Massachusetts Institute of Technology, USA.

Albar, A M (2022) The design and development of an intelligent adaptive extrusion system for additive manufacturing robotics in construction using advanced cementitious materials. PhD thesis, Brunel University, UK.

Albayoudh, K A F (2003) Assessment of total quality management in the Saudi construction industry organisations. PhD thesis, Loughborough University, UK.

Albeaino, G; Eiris, R; Gheisari, M and Issa, R R (2022) Dronesim: A VR-based flight training simulator for drone-mediated building inspections. Construction Innovation, 22(4), pp. 831-848. ISSN 1471-4175

Alencastro, J; Fuertes, A and de Wilde, P (2016) Improving the quality management systems for energy-efficient social housing projects. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Alencastro, J; Fuertes, A and de Wilde, P (2020) Quality management in UK social housing projects: Addressing thermal performance. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Alencastro, J; Fuertes, A and de Wilde, P (2024) Investigating the influence of quality management on building thermal performance. Engineering, Construction and Architectural Management, 31(8), pp. 3356-3376. ISSN 0969-9988

Algithami, S M (2017) The use of a system dynamics approach for modelling maturity of total quality management in Saudi construction firms. PhD thesis, University of Reading, UK.

Alhassan, T.; Ameyaw, S.; Kpamma, Z. E. and Ako-Adjei, J. T. (2026) Sustaining educational infrastructure: An assessment of facilities maintenance management practices in selected public higher education institutions in northern Ghana. International Journal of Building Pathology and Adaptation, 44(4), pp. 1046-1061. ISSN 2398-4708

Alhemoud, A M (1996) The development and testing of a comprehensive tool for assessing the effectiveness of occupational safety and health programs. PhD thesis, University of Cincinnati, USA.

Alhozaimy, A M and Al-Negheimish, A I (1999) Introducing and managing quality scheme for rmc industry in Saudi Arabia. Journal of Construction Engineering and Management, 125(4), pp. 249-255. ISSN 0733-9364

Alhusban, M (2018) Conceptual procurement framework for building information modelling uptake to enhance buildings' sustainability performance in the Jordanian public sector. PhD thesis, University of Portsmouth, UK.

Alhusban, M; Nasereddin, M; Alghossoon, A and Hatamleh, M T (2025) A hybrid conceptual procurement framework for BIM uptake to enhance buildings' sustainability performance in the Jordanian public sector. International Journal of Building Pathology and Adaptation, 43(1), pp. 93-116. ISSN 2398-4708

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Aljassmi, H and Han, S (2013) Analysis of causes of construction defects using fault trees and risk importance measures. Journal of Construction Engineering and Management, 139(7), pp. 870-880. ISSN 0733-9364

Aljassmi, H; Han, S and Davis, S (2014) Project pathogens network: New approach to analyzing construction-defects- generation mechanisms. Journal of Construction Engineering and Management, 140(1): 04013028, ISSN 0733-9364

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects. PhD thesis, University of New South Wales, Australia.

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects generation in construction projects. PhD thesis, University of New South Wales, Australia.

Alkaissy, Maryam (2022) Worksite accidents quantification in construction: Safety relations with project performance metrics. PhD thesis, Monash University, Australia.

Allam, A S; Bassioni, H; Ayoub, M and Kamel, W (2024) A framework for obtaining a BIM-compatible design solution based on quantitative decisions on building performance. International Journal of Construction Management, 24(11), pp. 1176-1190. ISSN 1562-3599

Almeida, N; Sousa, V; Alves Dias, L and Branco, F (2010) A framework for combining risk-management and performance-based building approaches. Building Research & Information, 38(2), pp. 157-174. ISSN 0961-3218

Almomani, A Q M; Almeida, R M S F; Vicente, R and Barreira, E (2025) Long-term monitoring of thermal comfort in three apartments in Jordan. Building Research & Information, 53(8), pp. 965-982. ISSN 0961-3218

Almusharraf, A and Whyte, A (2016) Task-based defect management: Anatomical classification. Built Environment Project and Asset Management, 6(3), pp. 345-358. ISSN 2044-124X

Alrajehi, S H (2014) Importance of KPI identification and implementation in Kuwaiti construction industry. PhD thesis, Brunel University, UK.

Alruqi, W M and Hallowell, M R (2019) Critical success factors for construction safety: Review and meta-analysis of safety leading indicators. Journal of Construction Engineering and Management, 145(3): 04019005, ISSN 0733-9364

Alshamsi, O S (2019) Multiple criteria decision making for supplier selection and cross-cultural considerations: Case study of the United Kingdom / United Arab Emirates construction industry. PhD thesis, University of Exeter, UK.

Alshboul, O.; Al-Shboul, K.; Shehadeh, A. and Tatari, O. (2026) Advancing equipment management for construction: Introducing a new model for cost, time and quality optimization. Construction Innovation, 26(4), pp. 1191-1217. ISSN 1471-4175

Alshboul, O; Shehadeh, A and Saleh, E (2025) Advancing construction quality management: An integrated evidential reasoning and belief functions framework. Journal of Construction Engineering and Management, 151(8): 04025093, ISSN 0733-9364

Alshehri, A R (2016) Quality management system for building maintenance. PhD thesis, Heriot-Watt University, UK.

Alves, T d C L; Neuman, Y; Walsh, K D; Needy, K L and AlMaian, R (2020) Highly effective companies in supplier quality surveillance practices: A quantitative analysis. Construction Management and Economics, 38(3), pp. 239-258. ISSN 01446193

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(3), pp. 290-303. ISSN 2044-124X

Alyileili, M and Opoku, A (2025) Artificial intelligence ethics in municipal and construction sectors: A literature review. Construction Economics and Building, 25(3-4), pp. 210-230. ISSN 2204-9029

Alzanati, A (2021) Complex building construction projects: reducing rework through facilitation of craftspeople's motivation in United Arab Emirates. PhD thesis, Bournemouth University, UK.

Alzubaidi, H J (1993) Maintenance modelling of a major hospital complex. PhD thesis, University of Salford, UK.

Alzubi, K. M.; Alaloul, W. S.; Al Salaheen, M.; Musarat, M. A.; Baarimah, A. O. and Mushtaha, A. W. (2025) Indoor construction productivity assessment using computer vision and mask region-based convolutional neural networks. Construction Innovation, 26(5), pp. 1523-1555. ISSN 1471-4175

Amadi, A and Higham, A P (2020) A cost trajectory to environmentally adaptive building construction in wet humid settings. International Journal of Building Pathology and Adaptation, 38(1), pp. 68-88. ISSN 23984708

Amankwaa, E F; Roberts, B M; Mensah, P and Gough, K V (2025) Impact of roofing materials on school temperatures in tropical Africa. Buildings & Cities, 6(1), pp. 139-157. ISSN 2632-6655

Amaratunga, D and Senaratne, S (2009) Principles of integrating research into teaching in higher education: Built environment perspective. International Journal of Construction Education and Research, 5(3), pp. 220-232. ISSN 1557-8771

Amoah, C (2023) Quality management framework for government social housing construction in South Africa. International Journal of Building Pathology and Adaptation, 41(6), pp. 217-236. ISSN 23984708

Amoah, C and Bikitsha, L (2022) Emerging contractor's management and planning skills to overcome business risk factors. International Journal of Building Pathology and Adaptation, 40(4), pp. 670-689. ISSN 23984708

Amponsah, Richard (2011) Improving project management practice in Ghana with focus on agriculture, banking and construction sectors of the Ghanaian economy. PhD thesis, RMIT University, Australia.

Anagnostou, G (2008) Quality in the apartment building industry a case study in Greece. PhD thesis, University College London, UK.

Anderson, P M (2006) Construction collaboration: a QFD approach. PhD thesis, Loughborough University, UK.

Andrade, J B (2017) Early stage design methodology to ensure life cycle sustainability of residential buildings. PhD thesis, Universidade do Minho, Portugal.

Andreu, I C and Oreszczyn, T (2004) Architects need environmental feedback. Building Research & Information, 32(4), pp. 313-328. ISSN 0961-3218

Andrews, F; Sal Moslehian, A; Johnston, N and Tucker, R (2024) Impacts of building defects on the health and wellbeing of apartment residents: A scoping review. Building Research & Information, 52(4), pp. 446-462. ISSN 0961-3218

André, J P C G (2014) Determination of the main parameters affecting the performance of bridge falsework systems. PhD thesis, Oxford Brookes University, UK.

Ansah, S K (2018) An integrated total quality management model for the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Aoieong, R T; Tang, S L and Ahmed, S M (2002) A process approach in measuring quality costs of construction projects: Model development. Construction Management and Economics, 20(2), pp. 179-192. ISSN 01446193

Aoieong, Raymond Taiman (2004) Capturing quality costs of construction processes using the construction process cost model (CPCM). PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Arai, K and Morimoto, E (2020) Renovation of the Japanese construction industry: Evaluation of i-Construction from the perspective of construction management. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Arayamparambil, S. R.; Jha, K. N. and Singh, A. (2026) Development of a quality assessment scoring framework for residential buildings. International Journal of Building Pathology and Adaptation, 44(4), pp. 833-848. ISSN 2398-4708

Arditi, D and Gunaydin, H M (1998) Factors that affect process quality in the life cycle of building projects. Journal of Construction Engineering and Management, 124(3), pp. 194-203. ISSN 0733-9364

Arditi, D and Lee, D E (2003) Assessing the corporate service quality performance of design-build contractors using quality function deployment. Construction Management and Economics, 21(2), pp. 175-185. ISSN 01446193

Arditi, D and Lee, D E (2004) Service quality performance of design/build contractors using quality function deployment. Construction Management and Economics, 22(2), pp. 123-127. ISSN 01446193

Arditi, D and Mochtar, K (2000) Trends in productivity improvement in the US construction industry. Construction Management and Economics, 18(1), pp. 15-27. ISSN 01446193

Arora, R (1997) Role and influence of emerging social dynamics in decisions on investment opportunities in construction industry. PhD thesis, Indian Institute of Technology Delhi, India.

Asnaashari, E (2011) A holistic conceptual model for managing construction logistics in building projects: the case of Iran. PhD thesis, Nottingham Trent University, UK.

Assaad, R; El-Adaway, I H; Hastak, M and Needy, K L (2020) Commercial and legal considerations of offsite construction projects and their hybrid transactions. Journal of Construction Engineering and Management, 146(12): 05020019, ISSN 0733-9364

Assad, M; Hosny, O; Elhakeem, A and El Haggar, S (2015) Green building design in Egypt from cost and energy perspectives. Architectural Engineering and Design Management, 11(1), pp. 21-40. ISSN 1745-2007

Ataman, C and Dino, İ G (2022) Performative design processes in architectural practices in Turkey: Architects' perception. Architectural Engineering and Design Management, 18(5), pp. 690-704. ISSN 1745-2007

Atherinis, D; Bakowski, B; Velcek, M and Moon, S (2018) Developing and laboratory testing a smart system for automated falsework inspection in construction. Journal of Construction Engineering and Management, 144(3): 04017119, ISSN 0733-9364

Atkinson, A (1998) Human error in the management of building projects. Construction Management and Economics, 16(3), pp. 339-349. ISSN 01446193

Atkinson, E; Spillane, J; Bradley, J and Brooks, T (2022) Challenges in the adoption of mobile information communication technology (m-ICT) in the construction phase of infrastructure projects in the UK. International Journal of Building Pathology and Adaptation, 40(3), pp. 327-344. ISSN 23984708

Atuahene, B T; Kanjanabootra, S and Gajendra, T (2020) Benefits of big data application experienced in the construction industry: A case of an Australian construction company. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Auchterlounie, A C (2004) A new quality theory for UK private housebuilding based on definable quality principles, impression management and the control of cognitive dissonance. PhD thesis, Heriot-Watt University, UK.

Augenbroe, G and Park, C S (2005) Quantification methods of technical building performance. Building Research & Information, 33(2), pp. 159-172. ISSN 0961-3218

Aurellado, E A (2010) ISO 9001.2000 as change strategy for a growing construction company. PhD thesis, Southeast Asia Interdisciplinary Development Institute, Philippines.

Awe, O O; Atofarati, E O; Adeyinka, M O; Musa, A P and Onasanya, E O (2024) Assessing the factors affecting building construction collapse casualty using machine learning techniques: A case of Lagos, Nigeria. International Journal of Construction Management, 24(3), pp. 261-269. ISSN 1562-3599

Azhar, S and Brown, J (2009) Bim for sustainability analyses. International Journal of Construction Education and Research, 5(4), pp. 276-292. ISSN 1557-8771

Azimzadeh, F (2000) COSTEFF model: A computer-based knowledge source for improving cost effectiveness of engineering and construction projects. DEng thesis, Lamar University - Beaumont, USA.

Azzazy, S; Ghaffarianhoseini, A; GhaffarianHoseini, A; Naismith, N; Doan, D T and Hollander, J B (2025) The significance of indoor thermal comfort on occupants' perception: In university buildings in auckland, New Zealand. Building Research & Information, 53(1-2), pp. 19-39. ISSN 0961-3218

Baba, A (2013) Developing a decision support framework for low carbon housing design and delivery in the UK. PhD thesis, University of the West of England, Bristol, UK.

Baba, A; Mahjoubi, L; Olomoilaiye, P and Booth, C (2013) Decision support framework for low impact housing design in the UK. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Babangida, I (2014) Hierarchical structuring and evaluation of risks, uncertainties and technical challenges faced by building refurbishment contractors. PhD thesis, University of Bolton, UK.

Babatunde, O K (2013) Cross cultural management of quality performance of Chinese construction firms in Nigeria. PhD thesis, National University of Singapore, Singapore.

Baborska-Narozny, M; Bandurski, K and Grudzinska, M (2025) Understanding shading through home-use experience, measurement and modelling. Buildings & Cities, 6(1), pp. 466-489. ISSN 2632-6655

Baborska-Narożny, M and Stevenson, F (2019) Service controls interfaces in housing: Usability and engagement tool development. Building Research & Information, 47(3), pp. 290-304. ISSN 0961-3218

Babu, A.; Krishnan, K.; Dutta, P. and Khan, T. (2026) Multistakeholder SEM-based evaluation of safety factors in road construction projects. Journal of Construction Engineering and Management, 152(7): 04026084, ISSN 0733-9364

Baden-Hellard, R (1996) The partnering philosophy: A procurement strategy for satisfaction through a teamwork solution to project quality. Journal of Construction Procurement, 2(1), pp. 41-55. ISSN 1358-9180

Bae, J; Choi, B; Krupka, E and Lee, S (2025) Harnessing project identity and safety norms to promote construction workers' safety behavior: Field intervention study. Journal of Construction Engineering and Management, 151(3): 04024208, ISSN 0733-9364

Bai, L (2013) RFID sensor-driven structural condition monitoring in integrated building information modeling environment. PhD thesis, University of Maryland, College Park, USA.

Baker, H; Smith, S; Masterton, G and Hewlett, B (2020) Data-led learning: Using natural language processing (NLP) and machine learning to learn from construction site safety failures. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Balogun, T B (2014) Towards a life cycle framework for bridge management systems in the UK: Insights from a critical review of international approaches and models. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Banawi, A A (2013) Improving construction processes by integrating lean, green, and six-sigma. PhD thesis, University of Pittsburgh, USA.

Banihashemi, S; Assadimoghadam, A; Hajirasouli, A; LeNguyen, K and Mohandes, S R (2025) Parametric design in construction: A new paradigm for quality management and defect reduction. International Journal of Construction Management, 25(13), pp. 1534-1551. ISSN 1562-3599

Barbachyn, S M; Devine, R D; Thrall, A P and Kurama, Y C (2017) Economic evaluation of high-strength materials in stocky reinforced concrete shear walls. Journal of Construction Engineering and Management, 143(10): 04017074, ISSN 0733-9364

Barbosa, Ava Santana (2010) Use of performance indicators in Brazilian construction firms: Diagnoses and orientations for utilization. PhD thesis, Universidade de São Paulo, Brazil.

Barbosa, J A; Araújo, C; Mateus, R and Bragança, L (2016) Smart interior design of buildings and its relationship to land use. Architectural Engineering and Design Management, 12(2), pp. 97-106. ISSN 1745-2007

Barker, R (2006) Waste assessment and application of improvement techniques in UK private housebuilding supply chains. PhD thesis, Cardiff University, UK.

Barlow, P L (2015) Assessment of subcontractor quality on California hospital construction projects through third-party inspections. PhD thesis, University of Florida, USA.

Bassioni, H A (2004) A framework for measuring business performance in construction contracting organisations. PhD thesis, Loughborough University, UK.

Batista Silveira Dos Santos, L F (2020) Efficient modeling strategies for performance-based building design supported by daylight and building energy simulations. PhD thesis, University of California, Berkeley, USA.

Battikha, M (2000) A computer-based system for construction quality management with application to highway pavements. PhD thesis, University of British Columbia, Canada.

Battikha, M G (2002) Qualicon: Computer-based system for construction quality management. Journal of Construction Engineering and Management, 128(2), pp. 164-173. ISSN 0733-9364

Battikha, M G (2008) Reasoning mechanism for construction nonconformance root-cause analysis. Journal of Construction Engineering and Management, 134(4), pp. 280-288. ISSN 0733-9364

Bavafa, M (2015) Enhancing information quality through building information modelling implementation within UK structural engineering organisations. PhD thesis, University of Salford, UK.

Bazen, E (2014) Effect of the Building Act 2011 on compliance costs in Western Australia. Construction Economics and Building, 14(2), pp. 41-56. ISSN 2204-9029

Beach, T; Yeung, J; Ghoroghi, A and Rezgui, Y (2025) Moving automated compliance checking to the operational phase of the building life-cycle: analysis and feasibility study in the UK. International Journal of Construction Management, 25(7), pp. 840-849. ISSN 1562-3599

Beainy, F; Commuri, S and Zaman, M (2012) Quality assurance of hot mix asphalt pavements using the intelligent asphalt compaction analyzer. Journal of Construction Engineering and Management, 138(2), pp. 178-187. ISSN 0733-9364

Becker, P E (2000) Modeling construction worker chemical exposures for compliance with OSHA permissible exposure limits: An investigation of lead exposures to highway bridge maintenance workers. DSc thesis, University of Massachusetts Lowell, USA.

Beh, H J; Rashidi, A; Talei, A and Lee, Y S (2022) Developing engineering students' capabilities through game-based virtual reality technology for building utility inspection. Engineering, Construction and Architectural Management, 29(7), pp. 2854-2877. ISSN 0969-9988

Behnisch, M and Ultsch, A (2009) Urban data-mining: Spatiotemporal exploration of multidimensional data. Building Research & Information, 37(5-6), pp. 520-532. ISSN 0961-3218

Beim, A and Jensen, K V (2007) Forming core elements for strategic design management: How to define and direct architectural value in an industrialized context. Architectural Engineering and Design Management, 3(1), pp. 29-38. ISSN 1745-2007

Belay, A M and Torp, O (2023) Construction cost performance under quality-gated framework: The cases of Norwegian road constructions. International Journal of Construction Management, 23(6), pp. 1030-1043. ISSN 1562-3599

Bell, M R (2019) Home is where the heart(ache) is: Building a regulatory regime for residential construction which more effectively meets community expectations for occupant health and safety. PhD thesis, King's College London, UK.

Benhaim, M (1997) Interfirm relationships within the construction industry: Towards the emergence of networks? A comparative study between France and the UK. PhD thesis, Brunel University, UK.

Bennett, J and Ferry, D (1990) Specialist contractors: A review of issues raised by their new role in building. Construction Management and Economics, 8(3), pp. 259-283. ISSN 01446193

Berawi, M A; Kim, A A; Naomi, F; Basten, V; Miraj, P; Medal, L A and Sari, M (2023) Designing a smart integrated workspace to improve building energy efficiency: An Indonesian case study. International Journal of Construction Management, 23(3), pp. 410-422. ISSN 1562-3599

Bhattacharjee, K; Bugalia, N and Mahalingam, A (2025) Differences in pathways to resilient safety culture for construction projects of different sizes. Journal of Construction Engineering and Management, 151(5): 04025026, ISSN 0733-9364

Bhorkar, S; Glew, D and Fletcher, M (2026) Improving survey-based data collection for more effective domestic retrofit evaluations: Perspectives from occupants and surveyors. Building Research & Information, 54(3), pp. 273-288. ISSN 0961-3218

Bhutto, K; Griffith, A and Stephenson, P (2004) Integration of quality, health and safety and environment management systems in contractor organisations. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Bignami, D F (2017) Testing solutions of a multi-disaster building's certification functional to the built environment sustainability and resilience. International Journal of Disaster Resilience in the Built Environment, 8(1), pp. 77-97. ISSN 1759-5916

Bigolin, M; Bussular, C Z and Silva Filho, L C P (2021) Evolutionary resilience in the housing sector: Requirements proposal. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 1-12. ISSN 1759-5916

Bina, K and Moghadas, N (2021) BIM-abm simulation for emergency evacuation from conference hall, considering gender segregation and architectural design. Architectural Engineering and Design Management, 17(5-6), pp. 361-375. ISSN 1745-2007

Birchall, S J (2011) An appraisal of the performance of a 'green' office building. PhD thesis, University of Leeds, UK.

Birchmore, R; Davies, K; Etherington, P; Tait, R and Pivac, A (2017) Overheating in Auckland homes: Testing and interventions in full-scale and simulated houses. Building Research & Information, 45(1-2), pp. 157-175. ISSN 0961-3218

Birgonul, M T; Dikmen, I and Demirel, T (2005) Decision support tool for the quantification of fault rates in construction fall accidents. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Bishop, J (2009) Managing technical knowledge to enhance organisational best practice. PhD thesis, Loughborough University, UK.

Boissonneault, A and Peters, T (2023) Concepts of performance in post-occupancy evaluation post-probe: A literature review. Building Research & Information, 51(4), pp. 369-391. ISSN 0961-3218

Boissonneault, A and Peters, T (2024) An exploration of post-occupancy evaluation in Canada: Origins, milestones and next steps. Building Research & Information, 52(3), pp. 332-357. ISSN 0961-3218

Boissonneault, A and Peters, T (2025) The POE paradigm in architecture: Practices and perspectives of Canadian practitioners. Building Research & Information, 53(5), pp. 565-581. ISSN 0961-3218

Bond, S and Dermisi, S (2017) Using GIS to measure the impact of the Canterbury earthquakes on house prices in Christchurch, NZ. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 123-138. ISSN 1759-5916

Bonham, M B (2013) Leading by example: New professionalism and the government client. Building Research & Information, 41(1), pp. 77-94. ISSN 0961-3218

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 3: Energy performance of the Probe buildings. Building Research & Information, 29(2), pp. 114-128. ISSN 0961-3218

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 2: Technical performance of the Probe buildings. Building Research & Information, 29(2), pp. 103-113. ISSN 0961-3218

Bordass, B and Leaman, A (2005) Making feedback and post-occupancy evaluation routine 1: A portfolio of feedback techniques. Building Research & Information, 33(4), pp. 347-352. ISSN 0961-3218

Bordass, B and Leaman, A (2005) Making feedback and post-occupancy evaluation routine 3: Case studies of the use of techniques in the feedback portfolio. Building Research & Information, 33(4), pp. 361-375. ISSN 0961-3218

Bordass, B; Leaman, A and Ruyssevelt, P (2001) Assessing building performance in use 5: Conclusions and implications. Building Research & Information, 29(2), pp. 144-157. ISSN 0961-3218

Bordass, W and Leaman, A (1997) Design for manageability. Building Research & Information, 25(3), pp. 148-157. ISSN 0961-3218

Bortolini, R and Forcada, N (2020) A probabilistic performance evaluation for buildings and constructed assets. Building Research & Information, 48(8), pp. 838-855. ISSN 0961-3218

Boukamp, F (2006) Modeling of and reasoning about construction specifications to support automated defect detection. PhD thesis, Carnegie Mellon University, USA.

Bowen, P A; Cattel, K S; Hall, K A; Edwards, P J and Pearl, R G (2002) Perceptions of time, cost and quality management on building projects. Construction Economics and Building, 2(2), pp. 48-56. ISSN 2204-9029

Boyd, D and Fellowes, J (2018) The problem of evaluating 'value for money' of school building programmes. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Bradford, C W (2017) The impact of the systematic incorporation of tolerances on gypsum board installation. PhD thesis, Indiana State University, USA.

Brager, G and Baker, L (2009) Occupant satisfaction in mixed-mode buildings. Building Research & Information, 37(4), pp. 369-380. ISSN 0961-3218

Brahme, R and Mahdavi, A (2003) Complex early design inquiries via generative design agents. Construction Innovation, 3(2), pp. 81-95. ISSN 1471-4175

Brambilla, A; Candido, C; Sangiorgio, M F; Gocer, O and Gocer, K (2021) Can commercial buildings cope with Australian bushfires? An IAQ analysis. Buildings & Cities, 2(1), pp. 583-598. ISSN 2632-6655

Branco Pedro, J; Meijer, F and Visscher, H (2010) Building control systems of European Union countries: A comparison of tasks and responsibilities. International Journal of Law in the Built Environment, 2(1), pp. 45-59. ISSN 1756-1450

Brandão, R; Hosseini, M R; Macêdo, A N; Melo, A C and Martek, I (2022) Public administration strategies that stimulate reverse logistics within the construction industry: A conceptual typology. Engineering, Construction and Architectural Management, 29(8), pp. 2924-2949. ISSN 0969-9988

Branki, C N E (1995) Agents, applications, and interactions in collaborative building design. PhD thesis, University of Strathclyde, UK.

Bray Jr., H G (1994) Domestic construction contractors and ISO 9000 registration. DE thesis, Louisiana Tech University, USA.

Brocklehurst, F; Morgan, E; Greer, K; Wade, J and Killip, G (2021) Domestic retrofit supply chain initiatives and business innovations: An international review. Buildings & Cities, 2(1), pp. 533-549. ISSN 2632-6655

Brooks, T (2020) Implementation and effectiveness of the ISO 9001 quality management system in the construction sector in the UK and Ireland. PhD thesis, Queen's University Belfast, UK.

Brooks, T and Gunning, J (2022) Walking a fine line: Examining the position of the construction quality auditor through the lens of financial audit literature. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Brooks, T; Gunning, J G; Spillane, J P and Cole, J (2021) Regulatory decoupling and the effectiveness of the ISO 9001 quality management system in the construction sector in the UK–a case study analysis. Construction Management and Economics, 39(12), pp. 988-1005. ISSN 01446193

Brown, C and Gorgolewski, M (2015) Understanding the role of inhabitants in innovative mechanical ventilation strategies. Building Research & Information, 43(2), pp. 210-221. ISSN 0961-3218

Brown, N; Wright, A J; Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(1), pp. 80-91. ISSN 0961-3218

Bröchner, J (1990) Impacts of information technology on the structure of construction. Construction Management and Economics, 8(2), pp. 205-218. ISSN 01446193

Bröchner, J; Josephson, P E and Kadefors, A (2002) Swedish construction culture, quality management and collaborative practice. Building Research & Information, 30(6), pp. 392-400. ISSN 0961-3218

Bu, Guoping (2013) Development of an integrated deterioration method for long-term bridge performance prediction. PhD thesis, Griffith University, Australia.

Bubshait, A A; Farooq, G; Jannadi, M O and Assaf, S A (1999) Quality practices in design organizations. Construction Management and Economics, 17(6), pp. 799-809. ISSN 01446193

Buckman, A H; Mayfield, M and Beck, S B M (2014) What is a smart building? Smart and Sustainable Built Environment, 3(2), pp. 92-109. ISSN 2046-6099

Burati, J L; Farrington, J J and Ledbetter, W B (1992) Causes of quality deviations in design and construction. Journal of Construction Engineering and Management, 118(1), pp. 34-49. ISSN 0733-9364

Burati, J L; Matthews, M F and Kalidindi, S N (1991) Quality management in construction industry. Journal of Construction Engineering and Management, 117(2), pp. 341-359. ISSN 0733-9364

Burati, J L; Matthews, M F and Kalidindi, S N (1992) Quality management organizations and techniques. Journal of Construction Engineering and Management, 118(1), pp. 112-128. ISSN 0733-9364

Burman, E (2016) Assessing the operational performance of educational buildings against design expectations: a case study approach. PhD thesis, University College London, UK.

Burrell, P A (2017) Structural errors and failures in construction: is knowledge hidden? PhD thesis, Anglia Ruskin University, UK.

Burrows, B G (1989) Organisation and quality of falsework construction: A socio-economic study of the organisational structure of the construction industry with respect to the falsework production process and the quality of workmanship attained. PhD thesis, University of Warwick, UK.

Burtonshaw-Gunn, S A (2001) Strategic supply chain management: Critical success factors for partnering relationships within the UK construction industry. PhD thesis, Manchester Metropolitan University, UK.

Bweupe, A S and Mwiya, B (2024) Quality management in ready-mix concrete production in Zambia. Journal of Construction Business and Management, 7(1), pp. 1-15. ISSN 2521-0165

Bártolo, H M G (2000) Improving the value of design: A quality/cost approach. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Caetano, I.; Pinto, D.; Amândio, M.; Silva, J.; Sanhudo, L.; Azenha, M.; El Sibaii, M.; Granja, J.; Patrício, H.; Ganhão, F. and Poças Martins, J. (2026) Algorithmic workflow for digitising inspection data in railway tunnel maintenance. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Cai, H; Kuczek, T; Dunston, P S and Li, S (2017) Correlating intelligent compaction data to in situ soil compaction quality measurements. Journal of Construction Engineering and Management, 143(8): 04017038, ISSN 0733-9364

Cameron, I (1999) A goal setting approach to the practice of safety management in the construction industry: Three case studies. PhD thesis, University of Manchester, UK.

Camfield, F E (1998) Guidelines for quarrystone armor units. Journal of Construction Engineering and Management, 124(6), pp. 465-479. ISSN 0733-9364

Camilleri, M; Jaques, R and Isaacs, N (2001) Impacts of climate change on building performance in New Zealand. Building Research & Information, 29(6), pp. 440-450. ISSN 0961-3218

Candel, M; Gustavsson, T K and Eriksson, P E (2019) Beyond national building regulations: Exploring public-private negotiations over sustainability requirements. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Caprario, Rick (2025) Interpersonal communication, relationships, and collaboration among construction specialty contractor project management professionals: A single case study. EdD thesis, Baylor University, USA.

Cardin, M-A (2011) Quantitative performance-based evaluation of a procedure for flexible design concept generation. PhD thesis, Massachusetts Institute of Technology, USA.

Cariaga, I; El-Diraby, T and Osman, H (2007) Integrating value analysis and quality function deployment for evaluating design alternatives. Journal of Construction Engineering and Management, 133(10), pp. 761-770. ISSN 0733-9364

Carpenter, N and Bausman, D C (2016) Project delivery method performance for public school construction: Design-bid-build versus CM at risk. Journal of Construction Engineering and Management, 142(10): 05016009, ISSN 0733-9364

Carpino, C; Loukou, E; Heiselberg, P and Arcuri, N (2020) Energy performance gap of a nearly zero energy building (nZEB) in Denmark: The influence of occupancy modelling. Building Research & Information, 48(8), pp. 899-921. ISSN 0961-3218

Carretero-Ayuso, M J; García-Sanz-Calcedo, J and Reyes-Rodríguez, A M (2016) Qualitative and quantitative analyses on project deficiencies in flat-roof design in extremadura, Spain. Journal of Construction Engineering and Management, 142(11): 04016061, ISSN 0733-9364

Castaño-Rosa, R and Nerweyi, D (2025) Bringing post-occupancy evaluation up front to enhance energy efficiency in residential buildings. Building Research & Information, 53(8), pp. 1075-1091. ISSN 0961-3218

Cavalcante, C A V; Alencar, M H and Lopes, R S (2017) Multicriteria model to support maintenance planning in residential complexes under warranty. Journal of Construction Engineering and Management, 143(4): 04016110, ISSN 0733-9364

Cavalcante, Gustavo Henrique Ferreira (2022) Seismic risk analysis of typical bridges located in the northeastern Brazil. PhD thesis, Universidade Estadual de Campinas, Brazil.

Celis-D'Amico, F; Echeverria-Valiente, E; Garcia-Alvarado, R; Escorcia-Oyola, O and da Casa-Martín, F (2025) CASA+: Highly energy-efficient housing system for the central-south of Chile. Construction Innovation, 25(2), pp. 306-327. ISSN 1471-4175

Celoza, A and Alazzam, M (2026) Managing risk, innovation, and collaboration through supplier qualification. Journal of Construction Engineering and Management, 152(1): 04025223, ISSN 0733-9364

Cevallos, O A; Jaramillo, D; Ávila, C and Aldaz, X (2017) Production and quality levels of construction materials in Andean regions: A case study of Chimborazo, Ecuador. Journal of Construction in Developing Countries, 22(1), pp. 115-136. ISSN 1823-6499

Cha, G; Park, S and Oh, T (2019) A terrestrial lidar-based detection of shape deformation for maintenance of bridge structures. Journal of Construction Engineering and Management, 145(12): 04019075, ISSN 0733-9364

Chai, Y T and Wang, T K (2023) Evaluation and decision-making framework for concrete surface quality based on computer vision and ontology. Engineering, Construction and Architectural Management, 30(10), pp. 4881-4913. ISSN 0969-9988

Chan, Y K; Huang, C H; Chao Yi, N; Tseng, H H; Lin, C H; Chang, R F and Chan, M H (2026) A study of detection systems for safety guardrails at construction sites: Innovative applications of image processing and perspective correction. Journal of Construction Engineering and Management, 152(4): 04026018, ISSN 0733-9364

Chan, D W M; Hung, H T W; Chan, A P C and Lo, T K K (2014) Overview of the development and implementation of the mandatory building inspection scheme (MBIS) in Hong Kong. Built Environment Project and Asset Management, 4(1), pp. 71-89. ISSN 2044-124X

Chan, E H W and Chan, A T S (1999) Imposing ISO 9000 quality assurance system on statutory agents in Hong Kong. Journal of Construction Engineering and Management, 125(4), pp. 285-291. ISSN 0733-9364

Chang, A S; Du, S J and Shen, F Y (2012) Engineer self-evaluation checklist for effective site visits. Journal of Construction Engineering and Management, 138(10), pp. 1220-1229. ISSN 0733-9364

Chang, J; Jaskula, K; Papadonikolaki, E; Rovas, D and Parlikad, A K (2024) Can blockchain prevent the deterioration of building handover information quality for higher education institutions? Built Environment Project and Asset Management, 14(4), pp. 509-528. ISSN 2044-124X

Chang, L M; Georgy, M E and AbdelRazig, Y A (2000) Warranting quality of steel bridge coating. Journal of Construction Engineering and Management, 126(5), pp. 374-380. ISSN 0733-9364

Chang, Ruidong (2017) Towards sustainability in the Chinese construction industry: A transition approach. PhD thesis, University of Adelaide, Australia.

Chang, V; Xu, Y K; Zhang, J and Xu, Q (2021) Research on intelligent manufacturing development approach for China's local valve industry. Smart and Sustainable Built Environment, 10(2), pp. 293-321. ISSN 2046-6099

Changwang, S; Shaowei, H; Haifen, Z; Fuqu, P; Changxi, S and Hao, Q (2024) Automatic detection of water supply pipe defects based on underwater image enhancement and improved yolox. Journal of Construction Engineering and Management, 150(10): 04024134, ISSN 0733-9364

Charousaei, M; Faizi, M and Khakzand, M (2025) The impact of the visual layout of university open space on students' behavior and satisfaction level: The case of Iran University of Science and Technology. Smart and Sustainable Built Environment, 14(4), pp. 992-1016. ISSN 2046-6099

Chen, H; Feng, Z; Liu, Y; Chen, B; Deng, T; Qin, Y and Xu, W (2023) Multiobjective optimization of a 3D laser scanning scheme for engineering structures based on rf-NSGA-II. Journal of Construction Engineering and Management, 149(2): 4022169, ISSN 0733-9364

Chen, H; Zhu, Y and Luo, X (2022) Tablegraph: An image segmentation-based table knowledge interpretation model for civil and construction inspection documentation. Journal of Construction Engineering and Management, 148(10): 04022103, ISSN 0733-9364

Chen, H; Lei, Y; Wu, X and Liu, Y (2025) Evaluation of fuzzy uncertainty risk identification for waste-to-energy public-private partnership projects on the basis of the cloud model and fuzzy cognitive map. Journal of Construction Engineering and Management, 151(12): 04025191, ISSN 0733-9364

Chen, Kaiwen (2020) Analysis and management of UAV-captured images towards automation of building facade inspections. PhD thesis, Virginia Tech, USA.

Chen, Q; Long, D; Wang, S; Chen, Q and Yuan, B (2025) Real-time detection of personal protective equipment violations for construction workers using semisupervised learning and video clips. Journal of Construction Engineering and Management, 151(3): 04024213, ISSN 0733-9364

Chen, Q; Tian, Z; Lei, T and Huang, S (2023) An association rule mining model for evaluating the potential correlation of construction cross operation risk. Engineering, Construction and Architectural Management, 30(10), pp. 5109-5132. ISSN 0969-9988

Chen, S; Chen, D; Li, L; Miramini, S and Zhang, L (2024) Optimized bridge maintenance strategies: A system reliability-based approach to enhancing road network performance. Journal of Construction Engineering and Management, 150(3): 04023167, ISSN 0733-9364

Chen, S-M (2002) Intelligent scheduling model and multi-dimensional CM information system. PhD thesis, Columbia University, USA.

Chen, T Y-J (2019) Advancing quantitative risk analysis for critical water infrastructure. PhD thesis, University of Michigan, USA.

Chen, X; Ding, Y; Cory, C A; Hu, Y; Wu, K J and Feng, X (2021) A decision support model for subcontractor selection using a hybrid approach of QFD and AHP-improved grey correlation analysis. Engineering, Construction and Architectural Management, 28(6), pp. 1780-1806. ISSN 0969-9988

Chen, Y; Dib, H and Cox, R F (2014) A measurement model of building information modelling maturity. Construction Innovation, 14(2), pp. 186-209. ISSN 1471-4175

Cheng, M Y; Vu, Q T and Wu, T C (2026) Highway bridge crack inspection verification and training using an automated augmented reality system. Journal of Construction Engineering and Management, 152(3): 04025279, ISSN 0733-9364

Cheng, M Y; Wang, H T; Wu, Y W; Khitam, A F K and Li, Y M (2026) Multi-objective strategic travel network planning for post-earthquake bridge inspections. International Journal of Construction Management, 26(4), pp. 561-582. ISSN 1562-3599

Cheng, E W L; li, H; Fang, D P and Xie, F (2004) Construction safety management: An exploratory study from China. Construction Innovation, 4(4), pp. 229-241. ISSN 1471-4175

Cheung, S O and Tsang, K F (1997) Professional liabilities in construction: Exposures and responses. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Chew, M Y L (2021) Façade inspection for falling objects from tall buildings in Singapore. International Journal of Building Pathology and Adaptation, 41(6), pp. 162-183. ISSN 23984708

Chew, M Y L; Conejos, S and Law, J S L (2017) Green maintainability design criteria for nanostructured titanium dioxide (TiO2) façade coatings. International Journal of Building Pathology and Adaptation, 35(2), pp. 139-158.

Chew, M Y L and De Silva, N (2003) Maintainability problems of wet areas in high-rise residential buildings. Building Research & Information, 31(1), pp. 60-69. ISSN 0961-3218

Chew, M Y L and Tan, S S (2004) A multivariate approach to maintenance prediction of wet areas. Construction Management and Economics, 22(4), pp. 395-407. ISSN 01446193

Chiang, Y H; Tang, B S and Leung, W Y (2001) Market structure of the construction industry in Hong Kong. Construction Management and Economics, 19(7), pp. 675-687. ISSN 01446193

Chileshe, N (2006) Investigating practitioner's understanding of TQM in small and medium construction companies. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Chileshe, N (2007) Quality management concepts, principles, tools and philosophies: A valid methodology for deployment within UK construction-related SMEs. Journal of Engineering, Design and Technology, 5(1), pp. 49-67. ISSN 1726-0531

Chileshe, N and Sim, Y L (2007) Desirable management practices and cultural values for construction quality assessment systems (CONQUAS): Methodology for deployment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Chileshe, N and Watson, P (2004) The measurement of quality management levels within UK construction SMEs: Development and validation of TQ-SMART. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Chileshe, N; Watson, P; Maslow, D and Belokorovin, E (2005) The deployment of total quality management (TQM): The Russian experience. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Chinazzo, G. and Wang, N. (2026) How buildings shape occupant movement: A systematic review and framework. Buildings & Cities, 7(1), pp. 504-522. ISSN 2632-6655

Ching-Lung, F (2024) Using convolutional neural networks to identify illegal roofs from unmanned aerial vehicle images. Architectural Engineering and Design Management, 20(2), pp. 390-410. ISSN 1745-2007

Chmielewski, H T (2023) Overcoming modeling barriers in long-term interdependent infrastructure systems planning. PhD thesis, North Carolina State University, USA.

Cho, C; Kim, K; Park, J and Cho, Y K (2018) Data-driven monitoring system for preventing the collapse of scaffolding structures. Journal of Construction Engineering and Management, 144(8): 04018077, ISSN 0733-9364

Cho, Y; Kabassi, K; Pyeon, J H; Choi, K; Wang, C and Norton, T (2013) Effectiveness study of methods for removing temporary pavement markings in roadway construction zones. Journal of Construction Engineering and Management, 139(3), pp. 257-266. ISSN 0733-9364

Cho, Y; Wang, C and Zhuang, Z (2013) Framework for empirical process to improve nonnuclear gauge performance in hot-mix asphalt pavement construction. Journal of Construction Engineering and Management, 139(6), pp. 601-610. ISSN 0733-9364

Choe, S and Leite, F (2017) Assessing safety risk among different construction trades: Quantitative approach. Journal of Construction Engineering and Management, 143(5): 04016133, ISSN 0733-9364

Chohan, A H; Che-Ani, A I; Bhai Khan, S; Awad, J; Jawaid, A and Mohd Tawil, N (2015) A model of housing quality determinants for affordable housing. Journal of Construction in Developing Countries, 20(1), pp. 117-136. ISSN 1823-6499

Chokwitthaya, C (2020) A framework for augmenting building performance models using machine learning and immersive virtual environment. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Chou, J. S.; Yeh, P. C.; Liu, C. Y. and Chen, K. J. (2026) Improving detection of pollution fee declarations for environmental policy compliance through metaheuristic-optimized ensemble learning. Engineering, Construction and Architectural Management, 33(7), pp. 5820-5848. ISSN 0969-9988

Choudhary, R; Papalambros, P Y and Malkawi, A (2005) A hierarchical design optimization approach for meeting building performance targets. Architectural Engineering and Design Management, 1(1), pp. 57-76. ISSN 1745-2007

Choudhry, R M; Hinze, J W; Arshad, M and Gabriel, H F (2012) Subcontracting practices in the construction industry of Pakistan. Journal of Construction Engineering and Management, 138(12), pp. 1353-1359. ISSN 0733-9364

Chua Ying Kit, J (1996) The human-machine interface (HMI) and re-bar detection aspects of a non-destructive testing (NDT) robot. PhD thesis, City, University of London, UK.

Cirelli Jr., L R (2017) Impact of design fees and duration of design process on construction quality: Implications for quality management. PhD thesis, Baker College (Michigan), USA.

Coffelt Jr., D P (2008) Roof management improvement: Improving infrastructure management decision making through a consideration of total life cycle cost and deterioration. PhD thesis, Carnegie Mellon University, USA.

Coffie, G H; Novieto, D T and Yankah, J E (2025) Stakeholder views of prevalent unethical practices in the Ghanaian construction industry. Engineering, Construction and Architectural Management, 32(2), pp. 1010-1031. ISSN 0969-9988

Cohen, R; Standeven, M; Bordass, B and Leaman, A (2001) Assessing building performance in use 1: The Probe process. Building Research & Information, 29(2), pp. 85-102. ISSN 0961-3218

Cole, R J (2001) Lessons learned, future directions and issues for GBC. Building Research & Information, 29(5), pp. 355-373. ISSN 0961-3218

Cole, R J and Larsson, N K (1999) GBC '98 and GBTool: Background. Building Research & Information, 27(4-5), pp. 221-229. ISSN 0961-3218

Cole, R J; Robinson, J; Brown, Z and O'Shea, M (2008) Re-contextualizing the notion of comfort. Building Research & Information, 36(4), pp. 323-336. ISSN 0961-3218

Coleman, S and Robinson, J B (2018) Introducing the qualitative performance gap: Stories about a sustainable building. Building Research & Information, 46(5), pp. 485-500. ISSN 0961-3218

Collett, M; Hardy, A; Meulemans, J and Glew, D (2022) Evaluating the performance of a high thermal mass dwelling: Comparing predictions and in-situ measurements. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Comiskey, D and Wilson, K (2020) A performance barrier? Cavity barrier installation in wall envelope makeups. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Congress, S S C (2018) Novel infrastructure monitoring using multifaceted unmanned aerial vehicle systems: close range photogrammetry (UAV-CRP) data analysis. PhD thesis, University of Texas at Arlington, USA.

Conradie, D; van Reenen, T and Bole, S (2018) Degree-day building energy reference map for South Africa. Building Research & Information, 46(2), pp. 191-16. ISSN 0961-3218

Cook, E L (1997) Integration of total quality management with a project management approach for capital projects. PhD thesis, Texas A&M University, USA.

Cooper, I (1999) Which focus for building assessment methods: environmental performance or sustainability? Building Research & Information, 27(4-5), pp. 321-331. ISSN 0961-3218

Corbett, D I (1997) Quantifying quality in industrial construction. PhD thesis, Pennsylvania State University, USA.

Corona Suarez, G A (2007) Simulation-aided framework for assessing the effect of project quality management on construction performance. PhD thesis, University of Alberta, Canada.

Correia, Marcia Castilho (2019) Assessment of the quality of architectural projects for public health research laboratories: Sustainability and biosafety. PhD thesis, Universidade Federal do Rio de Janeiro, Brazil.

Cox, R F (1994) Case studies of employee participation programs in construction and their effects on absenteeism. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Craig, D (2002) A model for customer-focused culture change in the speculative house-building industry: Executive summary. EngD thesis, University of Warwick, UK.

Crawley, D and Aho, I (1999) Building environmental assessment methods: Applications and development trends. Building Research & Information, 27(4-5), pp. 300-308. ISSN 0961-3218

Crawley, J; McKenna, E; Gori, V and Oreszczyn, T (2020) Creating domestic building thermal performance ratings using smart meter data. Buildings & Cities, 1(1), pp. 1-13. ISSN 2632-6655

Croffi, J; Kroll, D; Soebarto, V; Barrie, H and McDougall, K (2023) Wellbeing fostered by design: A framework for evaluating indoor environment performance. Buildings & Cities, 4(1), pp. 507-523. ISSN 2632-6655

Curran, M; Spillane, J P and Clarke-Hagan, D (2019) The considerate constructors scheme: Improving the image of construction, but how considerate are they to contractors? In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Cusumano, L; Farmakis, O; Granath, M; Olsson, N; Jockwer, R and Rempling, R (2025) Current benefits and future possibilities with digital field reporting. International Journal of Construction Management, 25(5), pp. 572-583. ISSN 1562-3599

Cusumano, L; Olsson, N; Granath, M; Jockwer, R and Rempling, R (2025) Clustering techniques and keyword extraction with large language models for knowledge discovery in building defects data. Construction Innovation, 25(7), pp. 76-97. ISSN 1471-4175

Cutrim, Sérgio Sampaio (2017) Port planning and governance in Brazil. PhD thesis, Universidade de São Paulo, Brazil.

Dabash, M S (2022) Applications of computer vision to improve construction site safety and monitoring. PhD thesis, University of Delaware, USA.

Dadashnejad, A A and Valmohammadi, C (2018) Investigating the effect of value stream mapping on operational losses: A case study. Journal of Engineering, Design and Technology, 16(3), pp. 478-500. ISSN 1726-0531

Daneshfar, M (2024) Integration of geospatial and environmental data to support building renovation. PhD thesis, Technische Universitaet Berlin, Germany.

Daouk, M E (2024) The future of Approved Inspectors: liable or not liable? Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(1), pp. 25-31. ISSN 17514304

Dara, S (2025) A study on implementing QFD (quality function deployment) in the construction of a commercial business center. Construction Innovation, 25(2), pp. 419-441. ISSN 1471-4175

Das, S (2009) Comprehensive maintainability scoring system (COMASS) for commercial buidings in tropical climate of Singapore. PhD thesis, National University of Singapore, Singapore.

Davies, R (2013) Healthcare built environment impacts, construction projects and organisational change. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Davis, K; Ledbetter, W B and Burati, J L (1989) Measuring design and construction quality costs. Journal of Construction Engineering and Management, 115(3), pp. 385-400. ISSN 0733-9364

Davtalab, O (2018) A data driven software platform for process automation, planning and inspection of contour crafting large-scale robotic 3D printing system. PhD thesis, University of Southern California, USA.

Dawood, N N and Dalakleidis, G D A (2002) Industrial review and development of a cost management system for the Greek construction industry. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Dawson, S and Osborne, A (2020) Re-shaping built environment higher education: The impact of degree apprenticeships in England. International Journal of Construction Education and Research, 16(2), pp. 102-116. ISSN 1557-8771

Dayan, V; Chileshe, N and Hassanli, R (2022) A scoping review of information-modeling development in bridge management systems. Journal of Construction Engineering and Management, 148(9): 03122006, ISSN 0733-9364

De Jarnette, V; McCarthy, L M; Bennert, T and Guercio, M C (2013) Use of mechanistic-empirical pavement design principles to assign asphalt pavement pay factor adjustments. Journal of Construction Engineering and Management, 139(11): 4013024, ISSN 0733-9364

De Silva, S H; Ranadewa, K A T O and Rathnasinghe, A P (2025) Barriers and strategies for implementing lean six sigma in small- and medium sized enterprises (SMEs) in construction industry: A fuzzy TOPSIS analysis. Construction Innovation, 25(2), pp. 510-551. ISSN 1471-4175

Del Solar, P; Del Río, M; Villoria, P and Nadal, A (2016) Analysis of recurrent defects in the execution of ceramic-coatings cladding in building construction. Journal of Construction Engineering and Management, 142(4): 04015093, ISSN 0733-9364

Delatte, N J (2017) Challenges of civil engineering megaprojects in North America. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(4), pp. 161-166. ISSN 17514304

Delgado-Hernandez, D J; Bampton, K E and Aspinwall, E (2007) Quality function deployment in construction. Construction Management and Economics, 25(6), pp. 597-609. ISSN 1466433X

Delgado-Hernandez, D J; Cruz-Cruz, C C and Vences-García, P Y (2017) Improvement management tools in the construction industry: Case study of Mexico. Journal of Construction Engineering and Management, 143(4): 05016024, ISSN 0733-9364

Delgado-Hernández, D J (2005) A framework for building quality into construction projects. PhD thesis, University of Birmingham, UK.

Delgado-Hernández, D J and Palacios-Navarro, U J (2024) A Bayesian network for selecting improvement management tools to increase customer satisfaction in the construction industry: Case study of Mexico. Engineering, Construction and Architectural Management, 31(7), pp. 2900-2915. ISSN 0969-9988

Dempsey, H; Curran, M and Spillane, J P (2020) Scaffolding safety in the UK and Ireland: A framework to improve health and safety neglect on small and medium-sized construction projects. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Den Hartog, J P (2004) Designing indoor climate. PhD thesis, Delft University of Technology, Netherlands.

Dias, J L; Silva, A; Chai, C; Gaspar, P L and De Brito, J (2014) Neural networks applied to service life prediction of exterior painted surfaces. Building Research & Information, 42(3), pp. 371-380. ISSN 0961-3218

Diaz-Murillo, M (1993) A strategy for the implementation of quality function deployment in the design-construction industry. PhD thesis, Texas A&M University, USA.

Dib, H; Adamo-Villani, N and Issa, R R A (2013) A GIS-based visual information model for buildng construction project management. International Journal of Construction Management, 13(1), pp. 1-18. ISSN 1562-3599

Dib, H Y (2006) Visual information access and management for life cycle project management. PhD thesis, University of Florida, USA.

Didla, N R (2018) Evaluation of the impact of quality risk management on quality performance in the UAE construction projects. PhD thesis, Heriot-Watt University, UK.

Ding, G K C (2007) Life cycle energy assessment of Australian secondary schools. Building Research & Information, 35(5), pp. 487-500. ISSN 0961-3218

Dixit, A; Chauhan, R and Shaw, R (2025) Application of smart systems and emerging technologies for disaster risk reduction and management in Nepal. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 328-343. ISSN 1759-5908

Doan, D T; GhaffarianHoseini, A; Naismith, N; Ghaffarianhoseini, A; Zhang, T and Tookey, J (2023) An empirical examination of green star certification uptake and its relationship with BIM adoption in New Zealand. Smart and Sustainable Built Environment, 12(1), pp. 84-104. ISSN 2046-6099

Doan, D T; Ghaffarianhoseini, A; Naismith, N; Ghaffarianhoseini, A and Tookey, J (2024) Developing a framework for building information modelling (BIM) adoption in New Zealand. Built Environment Project and Asset Management, 14(3), pp. 490-506. ISSN 2044-124X

Dobrucali, E; Demirkesen, S; Sadikoglu, E; Zhang, C and Damci, A (2024) Investigating the impact of emerging technologies on construction safety performance. Engineering, Construction and Architectural Management, 31(3), pp. 1322-1347. ISSN 0969-9988

Dogbegah, R; Owusu-Manu, D and Omoteso, K (2011) A principal component analysis of project management competencies for the Ghanaian construction industry. Construction Economics and Building, 11(1), pp. 26-40. ISSN 2204-9029

Doloi, H (2009) Analysis of pre-qualification criteria in contractor selection and their impacts on project success. Construction Management and Economics, 27(12), pp. 1245-1263. ISSN 1466433X

Donato, V; Lo Turco, M and Bocconcino, M M (2018) BIM-QA/QC in the architectural design process. Architectural Engineering and Design Management, 14(3), pp. 239-254. ISSN 1745-2007

Dong, M H (1981) Assessment of Occupational Safety and Health Act of 1970: A case analysis of retrospective work injury data. DPA thesis, University of Southern California, USA.

Donn, M; Selkowitz, S and Bordass, B (2012) The building performance sketch. Building Research & Information, 40(2), pp. 186-208. ISSN 0961-3218

Donn, M (2025) Simulation and the building performance gap. Buildings & Cities, 6(1), pp. 713-728. ISSN 2632-6655

Dosumu, O; Idoro, G and Onukwube, H (2017) Causes of errors in construction contract documents in Southwestern, Nigeria. Journal of Construction Business and Management, 1(2), pp. 11-23. ISSN 2521-0165

Dozzi, P; Hartman, F; Tidsbury, N and Ashrafi, R (1996) More-stable owner-contractor relationships. Journal of Construction Engineering and Management, 122(1), pp. 30-35. ISSN 0733-9364

Dreschler, M (2009) Fair competition: How to apply the 'economically most advantageous tender' award mechanism in the Dutch construction industry. PhD thesis, Delft University of Technology, Netherlands.

Du, H (2012) Modelling of building performance under the UK climate change projections and the prediction of future heating and cooling design loads in building spaces. PhD thesis, University of Northumbria at Newcastle, UK.

Du, J; Shi, Y; Zou, Z and Zhao, D (2018) COVR: Cloud-based multiuser virtual reality headset system for project communication of remote users. Journal of Construction Engineering and Management, 144(2): 04017109, ISSN 0733-9364

Du, J; Xue, Y; Sugumaran, V; Hu, M and Dong, P (2023) Improved biogeography-based optimization algorithm for lean production scheduling of prefabricated components. Engineering, Construction and Architectural Management, 30(4), pp. 1601-1635. ISSN 0969-9988

Duerr, D (1990) Lift of Shippingport reactor pressure vessel. Journal of Construction Engineering and Management, 116(1), pp. 188-197. ISSN 0733-9364

Dunston, P S and Bernold, L E (2000) Adaptive control for safe and quality rebar fabrication. Journal of Construction Engineering and Management, 126(2), pp. 122-129. ISSN 0733-9364

Dunston, P S; Savage, B M and Mannering, F L (2000) Weekend closure for construction of asphalt overlay on urban highway. Journal of Construction Engineering and Management, 126(4), pp. 313-315. ISSN 0733-9364

Dunston, P S and Wang, X (2005) Mixed reality-based visualization interfaces for architecture, engineering, and construction industry. Journal of Construction Engineering and Management, 131(12), pp. 1301-1309. ISSN 0733-9364

Dyer, B; Goodrum, P M and Viele, K (2012) Effects of omitted variable bias on construction real output and its implications on productivity trends in the United States. Journal of Construction Engineering and Management, 138(4), pp. 558-566. ISSN 0733-9364

Dyer, B D (2010) Construction industry productivity: Examining the effects of omitted variable bias in the census construction price index models. PhD thesis, University of Kentucky, USA.

Dykes, C and Baird, G (2014) Performance benchmarks for non-domestic buildings: Towards user perception benchmarks. Building Research & Information, 42(1), pp. 62-71. ISSN 0961-3218

Ed Koehn, E; Kothari, R K and Pan, C S (1995) Safety in developing countries: Professional and bureaucratic problems. Journal of Construction Engineering and Management, 121(3), pp. 261-265. ISSN 0733-9364

Edwards, P J and Bowen, P A (1998) Risk and risk management in construction: A review and future directions for research. Engineering, Construction and Architectural Management, 5(4), pp. 339-349. ISSN 0969-9988

Ege, D N; Aalto, P and Steinert, M (2024) People, space use and objects: an UWB-based quantifying approach for post-occupancy evaluation of new architectural spaces. Engineering, Construction and Architectural Management, 31(13), pp. 271-284. ISSN 0969-9988

Egwunatum, S I; Anumudu, A C; Eze, E C and Awodele, I A (2022) Total quality management (TQM) implementation in the Nigerian construction industry. Engineering, Construction and Architectural Management, 29(1), pp. 354-382. ISSN 0969-9988

Eid, M E M (2004) Rethinking relationships in the construction industry: integrating sustainable development into project management processes. PhD thesis, University of Edinburgh, UK.

Eiris, R; Albeaino, G; Gheisari, M; Benda, W and Faris, R (2021) Indrone: A 2D-based drone flight behavior visualization platform for indoor building inspection. Smart and Sustainable Built Environment, 10(3), pp. 438-456. ISSN 2046-6099

Ekenel, M (2004) Durability performance of advanced construction materials. PhD thesis, University of Missouri - Rolla, USA.

Eksteen, B (1999) Construction management education for the 21st century: A South African perspective. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

El Ghazali, Y (2013) Implications of RFID in a supply chain: Process, knowledge management and performance. PhD thesis, Ecole Polytechnique, Montreal, Canada.

El Sawalhi, N I and Yazgi, A N (2021) House of quality: A method to identify landscape design requirements. Construction Innovation, 21(3), pp. 441-455. ISSN 1471-4175

El-Abbasy, M S; Senouci, A; Zayed, T; Mirahadi, F and Parvizsedghy, L (2014) Condition prediction models for oil and gas pipelines using regression analysis. Journal of Construction Engineering and Management, 140(6): 4014013, ISSN 0733-9364

El-Rayes, K and Kandil, A (2005) Time-cost-quality trade-off analysis for highway construction. Journal of Construction Engineering and Management, 131(4), pp. 477-486. ISSN 0733-9364

El-Sayegh, S M; AbdRaboh, T; Elian, D; ElJarad, N and Ahmad, Y (2022) Developing a bi-parameter bidding model integrating price and sustainable construction practices. International Journal of Construction Management, 22(11), pp. 2191-2198. ISSN 1562-3599

Elazhary, M and El-adaway, I H (2025) Enhancing management of transportation projects: Integration factors for using smart contracts. Journal of Construction Engineering and Management, 151(12): 04025201, ISSN 0733-9364

Elazouni, A M (2006) Classifying construction contractors using unsupervised-learning neural networks. Journal of Construction Engineering and Management, 132(12), pp. 1242-1253. ISSN 0733-9364

Eldin, N and Hikle, V (2003) Pilot study of quality function deployment in construction projects. Journal of Construction Engineering and Management, 129(3), pp. 314-329. ISSN 0733-9364

Eleftheriadis, E (2018) Decision-based and BIM-embedded optimisation framework for material, cost and carbon efficiency of RC building structures. PhD thesis, University College London, UK.

Elghaish, F; Matarneh, S T; Talebi, S; Abu-Samra, S; Salimi, G and Rausch, C (2022) Deep learning for detecting distresses in buildings and pavements: A critical gap analysis. Construction Innovation, 22(3), pp. 554-579. ISSN 1471-4175

Elhakeem, A A M (2006) An asset management framework for educational buildings with life-cycle cost analysis. PhD thesis, University of Waterloo, Canada.

Elhegazy, H; Ebid, A; Mahdi, I; Haggag, S and Abdul-Rashied, I (2021) Implementing QFD in decision making for selecting the optimal structural system for buildings. Construction Innovation, 21(2), pp. 345-360. ISSN 1471-4175

Elliott, M E and Heymsfield, E (2003) Inspection of luling bridge cable stays: Case study. Journal of Construction Engineering and Management, 129(2), pp. 226-230. ISSN 0733-9364

Ellis L, P A L T (2013) Assessing learning and teaching strategies of a post-graduate capstone course: Students' perspective. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Elmasry, M; Zayed, T and Hawari, A (2019) Multi-objective optimization model for inspection scheduling of sewer pipelines. Journal of Construction Engineering and Management, 145(2): 04018129, ISSN 0733-9364

Elsebaei, M; Elnawawy, O; Othman, A A E and Badawy, M (2022) Causes and impacts of site accidents in the Egyptian construction industry. International Journal of Construction Management, 22(14), pp. 2659-2670. ISSN 1562-3599

Elshaboury, N; Zayed, T and Mohammed Abdelkader, E (2025) A hybrid spherical fuzzy AHP-marcos model for evaluating the condition of saltwater pipes in Hong Kong. Engineering, Construction and Architectural Management, 32(5), pp. 3285-3325. ISSN 0969-9988

Eltigani, Hadi Mohammed Ahmed (1995) An investigation into the impact of quality management systems upon construction productivity at the site level. PhD thesis, University of Strathclyde, UK.

Elyamany, A H M (2010) Developing a rational approach for contractor selection based on history of construction quality and long-term performance. PhD thesis, North Dakota State University, USA.

Emmitt, S; Gorse, C A and Jones, S R (1999) The housing site manager: Changing roles and training needs. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Emuze, F (2018) Foreseeing countermeasures for construction safety violations in South Africa. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Enshassi, A (1997) Construction safety issues in Gaza Strip. Building Research & Information, 25(6), pp. 370-373. ISSN 0961-3218

Enshassi, A; Arain, F and Tayeh, B (2012) Major causes of problems between contractors and subcontractors in the Gaza Strip. Journal of Financial Management of Property and Construction, 17(1), pp. 92-112. ISSN 1366-4387

Enshassi, M S A; Walbridge, S; West, J S and Haas, C T (2020) Dynamic and proactive risk-based methodology for managing excessive geometric variability issues in modular construction projects using Bayesian theory. Journal of Construction Engineering and Management, 146(2): 04019096, ISSN 0733-9364

Erpen, Mauro Luiz (2020) Analysis of the perception of relative importance of critical success factors in the civil construction industry using artificial neural networks. PhD thesis, Universidade de Brasília, Brazil.

Ertemir, D Y and Edis, E (2023) Sustaining modern heritage buildings: Visual defect categorisation guides for the general condition survey of rendered-painted facades. International Journal of Building Pathology and Adaptation, 41(3), pp. 606-624. ISSN 23984708

Escamilla, E (2011) Investigation of project management planning practices for renovation of historical buildings in urban contexts located in Texas. PhD thesis, Texas A&M University, USA.

Esguicero, Fabio Jose (2020) Framework applied to process modeling in municipal management of construction waste. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Esmaeili, B and Hallowell, M R (2012) Diffusion of safety innovations in the construction industry. Journal of Construction Engineering and Management, 138(8), pp. 955-963. ISSN 0733-9364

Essiet, U M (2016) Developing a framework to facilitate the assessment of asset management information quality in facilities management operations. PhD thesis, University of Huddersfield, UK.

Ewart, K and Silcock, G (1987) An analysis of the cost of compliance with the fire services order, Northern Ireland, 1985. Construction Management and Economics, 5(1), pp. 3-12. ISSN 01446193

Eweda, A; Al-Sakkaf, A; Zayed, T and Alkass, S (2023) Condition assessment model of building indoor environment: A case study on educational buildings. International Journal of Building Pathology and Adaptation, 41(4), pp. 767-788. ISSN 23984708

Fahid, S (2007) An investigation of the effectiveness of total quality management in the UK construction industry: An empirical study. PhD thesis, Heriot-Watt University, UK.

Fahrich, R; Schumann, L; Kremser, L; Schmitt, L and Kriegel, M (2025) Building energy efficiency assessment considering IEQ and sustainability certification data for German office buildings. Building Research & Information, 53(7), pp. 912-928. ISSN 0961-3218

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Falorca, J F and Lanzinha, J C G (2021) Facade inspections with drones–theoretical analysis and exploratory tests. International Journal of Building Pathology and Adaptation, 39(2), pp. 235-258. ISSN 23984708

Famiyeh, S; Amoatey, C T; Adaku, E and Agbenohevi, C S (2017) Major causes of construction time and cost overruns: A case of selected educational sector projects in Ghana. Journal of Engineering, Design and Technology, 15(2), pp. 181-198.

Fan, C L (2026) Crack identification and severity analysis via computer vision: Comparative study of rgb and grayscale imagery. Journal of Construction Engineering and Management, 152(3): 04026004, ISSN 0733-9364

Fan, C L (2020) Defect risk assessment using a hybrid machine learning method. Journal of Construction Engineering and Management, 146(9): 04020102, ISSN 0733-9364

Fan, L C N (2001) Strategic quality management for construction organisations. DBA thesis, Brunel University, UK.

Fang, D P; Huang, X Y and Hinze, J (2004) Benchmarking studies on construction safety management in China. Journal of Construction Engineering and Management, 130(3), pp. 424-432. ISSN 0733-9364

Fang, X; Li, H; Ma, J; Xing, X; Ren, Q; Umer, W and Wang, L (2024) Online assessment of spontaneous mental fatigue in construction workers considering data quality: Improved online sequential extreme learning machine. Journal of Construction Engineering and Management, 150(11): 04024148, ISSN 0733-9364

Faqih, F; Zayed, T and Alfalah, G (2022) Technology-based multi-tiered building diagnosis framework. International Journal of Building Pathology and Adaptation, 40(1), pp. 101-133. ISSN 23984708

Farahani, A (2019) A systematic approach to strategic maintenance and renovation planning in multifamily buildings. PhD thesis, Chalmers University of Technology, Sweden.

Farahani, A; Wallbaum, H and Dalenbäck, J O (2020) Cost-optimal maintenance and renovation planning in multifamily buildings with annual budget constraints. Journal of Construction Engineering and Management, 146(3): 04020009, ISSN 0733-9364

Farrington, J J (1987) A methodology to identify and categorize costs of quality deviations in design and construction. PhD thesis, Clemson University, USA.

Faulkner, A J (1996) Achieving exemplary quality in the UK construction professions. PhD thesis, University of Salford, UK.

Favie, R (2010) Quality monitoring in infrastructural design-build projects: the analysis of an audit-based monitoring system. PhD thesis, Eindhoven University of Technology, Netherlands.

Fazlipour, M and Samadzad, M (2026) Engineering and economic feasibility of a new prefabrication ecosystem for steel construction in diverse low-rise residential buildings. Journal of Construction Engineering and Management, 152(2): 04025238, ISSN 0733-9364

Fedoruk, L E; Cole, R J; Robinson, J B and Cayuela, A (2015) Learning from failure: Understanding the anticipated-achieved building energy performance gap. Building Research & Information, 43(6), pp. 750-763. ISSN 0961-3218

Feng, H; Kassem, M; Greenwood, D and Doukari, O (2023) Whole building life cycle assessment at the design stage: A bim-based framework using environmental product declaration. International Journal of Building Pathology and Adaptation, 41(1), pp. 109-142. ISSN 23984708

Fernández-Sols, J L; Pathak, R; Lavy, S; Beltrán, L O; Son, K and Kim, K (2011) Framework for selecting performance assessment tools for achieving LEED 3.0 credits. Architectural Engineering and Design Management, 7(4), pp. 236-250. ISSN 1745-2007

Ferreira, C; Canhoto Neves, L; Silva, A and de Brito, J (2019) Stochastic Petri-net models to predict the degradation of ceramic claddings. Building Research & Information, 47(6), pp. 697-715. ISSN 0961-3218

Fialho, Beatriz Campos (2021) Design for smart maintenance enabled by BIM and IoT. PhD thesis, Universidade de São Paulo, Brazil.

Figliola, A; Canducci, A; Calcagni, L and Battisti, A (2024) Passive strategies for climate change mitigation in architectural heritage: the case study of Santa Maria in Trastevere Basilica, Rome. Building Research & Information, 52(7), pp. 725-747. ISSN 0961-3218

Fitz, D V and Saleeb, N (2019) Examining the quality and management of non-geometric building information modelling data at project hand-over. Architectural Engineering and Design Management, 15(4), pp. 297-310. ISSN 1745-2007

Fletcher, K (2018) A systemic model for a building performance and condition evaluation for primary schools. PhD thesis, University of Salford, UK.

Flett, P (2001) The role of quality in the management of projects. PhD thesis, University of Stirling, UK.

Flores, M and Mourgues, C (2024) Impact of using a formalized methodology for conflict detection based on 4D-BIM. Journal of Construction Engineering and Management, 150(7): 04024059, ISSN 0733-9364

Fobiri, Godfred (2024) A framework to apply reality capture technology for interim payment valuation of construction projects. PhD thesis, University of Johannesburg, South Africa.

Forbes, Lincoln Harding (1999) An engineering management-based investigation of owner satisfaction, quality and performance variables in health care facilities construction. PhD thesis, University of Miami, USA.

Forcada, N; Macarulla, M; Gangolells, M and Casals, M (2016) Handover defects: Comparison of construction and post-handover housing defects. Building Research & Information, 44(3), pp. 279-288. ISSN 0961-3218

Ford, B; Wilson, R; Gillott, M; Ibraheem, O; Salmeron, J and Sanchez, F J (2012) Passive downdraught evaporative cooling: Performance in a prototype house. Building Research & Information, 40(3), pp. 290-304. ISSN 0961-3218

Forman, T (2015) Practice, policy and professional roles: unintended consequences and performance gaps in UK domestic solid wall insulation retrofit projects. PhD thesis, Cardiff University, UK.

Formoso, C T and Jobim, M S S (2006) Challenges in improving customer focus in small-sized house-building companies in Brazil. Journal of Construction in Developing Countries, 11(2), pp. 77-101. ISSN 1823-6499

Forsythe, P (2006) Consumer-perceived appearance tolerances in construction quality management. Engineering, Construction and Architectural Management, 13(3), pp. 307-318. ISSN 0969-9988

Forsythe, P (2015) Monitoring customer perceived service quality and satisfaction during the construction process. Construction Economics and Building, 15(1), pp. 19-42. ISSN 2204-9029

Forsythe, P J (2007) A conceptual framework for studying customer satisfaction in residential construction. Construction Management and Economics, 25(2), pp. 171-182. ISSN 1466433X

Forsythe, P J (2016) Construction service quality and satisfaction for a targeted housing customer. Engineering, Construction and Architectural Management, 23(3), pp. 323-348. ISSN 0969-9988

Fortune, C and Hinks, J (1999) Quality issues in building project price forecasting: factors affecting model selection. Journal of Construction Procurement, 5(2), pp. 129-140. ISSN 1358-9180

Foruzanmehr, A and Vellinga, M (2011) Vernacular architecture: Questions of comfort and practicability. Building Research & Information, 39(3), pp. 274-285. ISSN 0961-3218

Foster, J A and Poston, A (2024) Occupant experience of domestic kitchen environments in low-energy social and affordable housing in Scotland. Building Research & Information, 52(7), pp. 799-816. ISSN 0961-3218

Francart, N; Höjer, M; Mjörnell, K; Orahim, A S; von Platten, J and Malmqvist, T (2020) Sharing indoor space: Stakeholders' perspectives and energy metrics. Buildings & Cities, 1(1), pp. 70-85. ISSN 2632-6655

Francis, T J; Geens, A J and Littlewood, J (2011) Assessing the effectiveness of maintenance practice, in caring for historic buildings. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

França, A J G L and Ornstein, S W (2022) The role of the built environment in updating design requirements in the post-pandemic scenario: A case study of selected diagnostic facilities in Brazil. Architectural Engineering and Design Management, 18(5), pp. 671-689. ISSN 1745-2007

França, Ana Judite Galbiatti Limongi (2016) Continuous improvement applied to standardized typology of buildings: Knowledge management in the context of the asset portfolio. PhD thesis, Universidade de São Paulo, Brazil.

Fraser, R and Evans, R W (1981) A study of scottish house-building performance. Construction Papers, 1(2), pp. 17-27. ISSN 0144-8587

Frei, M (2021) Data-driven building retrofit using a wireless sensor network. DSc thesis, ETH Zürich, Switzerland.

Friedman, A and Cammalleri, V (1996) Advanced wood-frame construction details in Canada. Building Research & Information, 24(5), pp. 270-278. ISSN 0961-3218

Fung, C K A (1996) Development of a TQM model for improving business performance based on surveys conducted in Hong Kong, Japan and the UK. PhD thesis, De Montfort University, UK.

Futcher, J; Mills, G and Emmanuel, R (2018) Interdependent energy relationships between buildings at the street scale. Building Research & Information, 46(8), pp. 829-844. ISSN 0961-3218

Galiano-Garrigós, A; García-Figueroa, A; Rizo-Maestre, C and González-Avilés, Á (2019) Evaluation of BIM energy performance and CO2 emissions assessment tools: A case study in warm weather. Building Research & Information, 47(7), pp. 787-812. ISSN 0961-3218

Gangolells, M and Casals, M (2012) Resilience to increasing temperatures: Residential building stock adaptation through codes and standards. Building Research & Information, 40(6), pp. 645-664. ISSN 0961-3218

Ganguly, K K; Padhy, R K and Rai, S S (2017) Managing the humanitarian supply chain: A fuzzy logic approach. International Journal of Disaster Resilience in the Built Environment, 8(5), pp. 521-536. ISSN 1759-5916

Gao, H and Zou, L (2025) How to improve customer trust in residential quality: An analysis of quality information disclosure strategies considering blockchain. Journal of Construction Engineering and Management, 151(9): 04025117, ISSN 0733-9364

Gao, S (2013) The toyota way model: An implementation framework for large Chinese construction firms. PhD thesis, National University of Singapore, Singapore.

Garrett, C C (1991) Roadway infrastructure management and investment behavior studies for developing countries: A multicriteria approach to road improvement decision-making. PhD thesis, Ohio State University, USA.

Gaspari, J; Fabbri, K and Marchi, L (2025) Investigating the influence of perforated façade skins on indoor illuminance level: A case study. Architectural Engineering and Design Management, 21(2), pp. 211-230. ISSN 1745-2007

Gasue, R; Aklashie, S; Dompey, A M A; Agyekum, K and Opoku, D (2026) Implementing materials passports in the construction industry: Empirical evidence from Ghana. International Journal of Building Pathology and Adaptation, 44(1), pp. 15-35. ISSN 2398-4708

Gehrig, G B (2002) A decision support system framework to improve design-construction integration and project performance on public sector underground utility projects. PhD thesis, Colorado State University, USA.

George, M and Sekpe, V (2010) Inspection of insulated concrete form walls using ground penetrating radar. International Journal of Construction Education and Research, 6(4), pp. 303-317. ISSN 1557-8771

Georgiadou, M C (2019) An overview of benefits and challenges of building information modelling (BIM) adoption in UK residential projects. Construction Innovation, 19(3), pp. 298-320. ISSN 1471-4175

Georgiou, J (2013) Workmanship and defects in housing in the state of Victoria, Australia. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gerber, B and Ekenel, M (2013) Building code requirements for inspection of adhesive anchors in concrete. Journal of Construction Engineering and Management, 139(10): 06013001, ISSN 0733-9364

Gerrish, T (2017) Exploring the effectiveness of BIM for energy performance management of non-domestic buildings. EngD thesis, Loughborough University, UK.

Gerstenberger, A J (2021) Modeling the likelihood of construction incidents using public data. EdD thesis, Teachers College, Columbia University, USA.

Geus, Lucio Marcos de (2016) A support model for defining the location of voluntary delivery points for small construction and demolition waste generators. PhD thesis, Pontifícia Universidade Católica do Paraná, Brazil.

Ghansah, F A and Lu, W (2025) Evaluating the critical resultant impacts of the COVID-19 pandemic on quality assurance of cross-border construction logistics and supply chain. Engineering, Construction and Architectural Management, 32(10), pp. 6665-6689. ISSN 0969-9988

Ghansah, F A; De-Graft, O-M and Ayarkwa, J (2021) Project management processes in the adoption of smart building technologies: A systematic review of constraints. Smart and Sustainable Built Environment, 10(2), pp. 208-226. ISSN 2046-6099

Ghansah, F A and Lu, W (2024) Major opportunities of digital twins for smart buildings: A scientometric and content analysis. Smart and Sustainable Built Environment, 13(1), pp. 63-84. ISSN 2046-6099

Ghansah, F A and Lu, W (2025) Managerial framework for quality assurance of cross-border construction logistics and supply chain during pandemic and post-pandemic: Lessons from COVID-19 in the world’s factory. Engineering, Construction and Architectural Management, 32(5), pp. 3007-3056. ISSN 0969-9988

Ghansah, F A; Lu, W and Ababio, B K (2024) Modelling the critical challenges of quality assurance of cross-border construction logistics and supply chain during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 31(5), pp. 2128-2150. ISSN 0969-9988

Ghansah, F A; Owusu-Manu, D G; Ayarkwa, J; Darko, A and Edwards, D J (2022) Underlying indicators for measuring smartness of buildings in the construction industry. Smart and Sustainable Built Environment, 11(1), pp. 126-142. ISSN 2046-6099

Ghansah, F A; Owusu-Manu, D G; Ayarkwa, J; Edwards, D J and Hosseini, M R (2022) Assessing the level of awareness of smart building technologies (sbts) in the developing countries. Journal of Engineering, Design and Technology, 20(3), pp. 696-711. ISSN 1726-0531

Gholami, E (2017) Exploiting BIM in energy efficient domestic retrofit: evaluation of benefits and barriers. PhD thesis, University of Liverpool, UK.

Ghosh, B. and Karmakar, S. (2026) Development and application of a digitalized document management system to update highway operation and management systems using building information modeling. Journal of Construction Engineering and Management, 152(7): 04026090, ISSN 0733-9364

Ghosh, B. and Karmakar, S. (2026) Development and application of a digitalised construction safety document management system for advanced constructions using building information modeling. International Journal of Construction Management, 26(8), pp. 1490-1507. ISSN 1562-3599

Ghosh, B and Karmakar, S (2025) Development and application of a digitalized construction quality document management system for advanced construction using building information modeling. Journal of Construction Engineering and Management, 151(6): 04025053, ISSN 0733-9364

Gibney, A (1998) Studies in eighteenth-century building history. PhD thesis, Trinity College Dublin, Ireland.

Gibson, D L (2022) Best practices for executing high-risk construction projects. DBA thesis, University of Maryland University College, USA.

Gil, N; Tommelein, I D; Kirkendall, R L and Ballard, G (2001) Leveraging specialty-contractor knowledge in design-build organizations. Engineering, Construction and Architectural Management, 8(5-6), pp. 355-367. ISSN 0969-9988

Gill, Z M; Tierney, M J; Pegg, I M and Allan, N (2010) Low-energy dwellings: The contribution of behaviours to actual performance. Building Research & Information, 38(5), pp. 491-508. ISSN 0961-3218

Gillis III, W L (2013) Development of an integrative commissioning methodology for new-building construction. PhD thesis, Missouri University of Science and Technology, USA.

Gilly, B A; Touran, A and Asai, T (1987) Quality control circles in construction. Journal of Construction Engineering and Management, 113(3), pp. 427-439. ISSN 0733-9364

Gjerde, M (2017) A change of scene: How the canterbury earthquake sequence led to a departure from concrete technologies. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Glagola, C R (1993) A model of current quality performance measurements for industrial construction. PhD thesis, Clemson University, USA.

Glew, D; Johnston, D; Miles-Shenton, D and Thomas, F (2020) Retrofitting suspended timber ground-floors; comparing aggregated and disaggregated evaluation methods. Building Research & Information, 48(5), pp. 572-586. ISSN 0961-3218

Glew, D; Smith, M B; Miles-Shenton, D and Gorse, C (2017) Assessing the quality of retrofits in solid wall dwellings. International Journal of Building Pathology and Adaptation, 35(5), pp. 501-518.

Gluch, P and Räisänen, C (2012) What tensions obstruct an alignment between project and environmental management practices? Engineering, Construction and Architectural Management, 19(2), pp. 127-140. ISSN 0969-9988

Godoy-Shimizu, D; Steadman, P; Hamilton, I; Donn, M; Evans, S; Moreno, G and Shayesteh, H (2018) Energy use and height in office buildings. Building Research & Information, 46(8), pp. 845-863. ISSN 0961-3218

Goh, Y M and Goh, W M (2015) Evaluating the effectiveness of fall prevention plan: Do we need another safety document? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Goins, J and Moezzi, M (2013) Linking occupant complaints to building performance. Building Research & Information, 41(3), pp. 361-372. ISSN 0961-3218

Gomez Villanueva, Sulyn Cossett (2023) Behavior-based quality system (bbqs). PhD thesis, University of California, USA.

González-Jorge, H; Martínez Sánchez, J; Díaz-Vilariño, L; Puente, I and Arias, P (2016) Automatic registration of mobile lidar data using high-reflectivity traffic signs. Journal of Construction Engineering and Management, 142(8): 4016022, ISSN 0733-9364

Gordon, C (2006) A formalism and a framework for planning of sensor-based construction inspections. PhD thesis, Carnegie Mellon University, USA.

Gorse, C; Glew, D; Miles-Shenton, D and Farmer, D (2015) Addressing the thermal performance gap: Possible performance control tools for the construction manager. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Gorse, C; Stafford, A; Shenton, D M; Johnston, D; Sutton, R and Farmer, D (2012) Thermal performance of buildings and the management process. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Goswami, M; Singh, J and Kumar, V (2016) An enterprise based decision support system for engineering aggregate selection: A case study. Journal of Engineering, Design and Technology, 14(4), pp. 851-873.

Goulias, D (1992) Quality assurance and specifications. PhD thesis, University of Texas at Austin, USA.

Gowri, K and Depanni, S (1998) The health and safety expert system (HASES): An expert system framework for building inspections. Engineering, Construction and Architectural Management, 5(1), pp. 92-101. ISSN 0969-9988

Gowthaman, M; Gamage, I and Karunaratne, T (2025) Framework for managing deficiencies and inefficiencies in quantity surveying-related software implementation. Construction Economics and Building, 25(2), pp. 192-214. ISSN 2204-9029

Gowthami, N R; Sridhar, C N V and Venkata Ramana, N (2022) An empirical implementation model of total quality management in construction: Southern India. International Journal of Construction Management, 22(15), pp. 3023-3033. ISSN 1562-3599

Graebert, R F (2015) The implementation of building energy management in commercial real estate and impacts on building energy performance. PhD thesis, Stanford University, USA.

Grassie, D; Schwartz, Y; Symonds, P; Korolija, I; Mavrogianni, A and Mumovic, D (2022) Energy retrofit and passive cooling: Overheating and air quality in primary schools. Buildings & Cities, 3(1), pp. 204-225. ISSN 2632-6655

Gravitt, D D (2004) The development and validation of a bar code based residential construction quality inspection procedure. PhD thesis, Indiana State University, USA.

Greeff, T N (2018) Justification for the recognition of a new nominate contract based on project defect management. LLD thesis, University of Pretoria, South Africa.

Gremyr, I; Bäckstrand, J; Fredriksson, A; Gatenholm, G and Halldórsson, Á (2023) Blueprinting construction logistics services for quality improvement. Construction Management and Economics, 41(1), pp. 60-78. ISSN 01446193

Grenzfurtner, W and Gronalt, M (2021) Continuous improvement of the industrialised housebuilding order fulfilment process. Construction Innovation, 21(1), pp. 22-39. ISSN 1471-4175

Grey Rodriguez, F C (2019) Space-mate: A framework to harmonize occupant well-being and building sustainability. PhD thesis, Stanford University, USA.

Griffith, A (2000) Integrated management systems: A single management system solution for project control? Engineering, Construction and Architectural Management, 7(3), pp. 232-240. ISSN 0969-9988

Griffith, A and Sidwell, A C (1997) Development of constructability concepts, principles and practices. Engineering, Construction and Architectural Management, 4(4), pp. 295-310. ISSN 0969-9988

Grimm, C T (1994) Void mortar joints: Bane of brick masonry. Journal of Construction Engineering and Management, 120(1), pp. 152-161. ISSN 0733-9364

Grimsrud, D; Bridges, B and Schulte, R (2006) Continuous measurements of air quality parameters in schools. Building Research & Information, 34(5), pp. 447-458. ISSN 0961-3218

Grob, H L (1998) Self-regulation and safety programs in construction. PhD thesis, University of Notre Dame, USA.

Grobler, L J and Singh, V (1999) Research information: The green buildings for Africa programme. Building Research & Information, 27(3), pp. 183-193. ISSN 0961-3218

Gu, Y (2011) The impacts of real-time knowledge based personal lighting control on energy consumption, user satisfaction and task performance in offices. PhD thesis, Carnegie Mellon University, USA.

Guerra-Santin, O and Silvester, S (2017) Development of Dutch occupancy and heating profiles for building simulation. Building Research & Information, 45(4), pp. 396-413. ISSN 0961-3218

Guha, P; Kar, S and Jha, K N (2025) Exploring leadership styles and their effect on the safety and quality performances in construction projects. Journal of Construction Engineering and Management, 151(9): 04025120, ISSN 0733-9364

Gunay, H B; Shen, W and Yang, C (2019) Text-mining building maintenance work orders for component fault frequency. Building Research & Information, 47(5), pp. 518-533. ISSN 0961-3218

Gunaydin, H M (1999) Impact of information technologies on project management functions. PhD thesis, Illinois Institute of Technology, USA.

Gunduz, M and Al-Naimi, N H (2022) Construction projects delay mitigation using integrated balanced scorecard and quality function deployment. Engineering, Construction and Architectural Management, 29(5), pp. 2073-2105. ISSN 0969-9988

Gunning, J G (1999) A review of the application of risk assessment procedures in construction management and research. Journal of Financial Management of Property and Construction, 4(1), pp. 59-74. ISSN 1366-4387

Gunning, J G (2003) The enhancement of quality in construction project management. PhD thesis, Ulster University, UK.

Gunning, J G (2004) An analysis of the impact of the revised: Bs en ISO 9001:2000 upon the ready mixed concrete industry of the United Kingdom. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Guo, H B (2022) From corporate social responsibility to creating shared value: Competitive strategies for Chinese international construction companies on the "one belt one road". PhD thesis, University of Hong Kong, Hong Kong.

Guo, K (2006) Risk of pavement warranties to contractors. PhD thesis, University of Florida, USA.

Guo, Z; Xu, X; Gao, X; Xu, Y; Liu, J; Zhang, M and Li, F (2025) Enhanced risk-based quality control for hydraulic engineering construction projects considering the risk-influencing mechanism. Journal of Construction Engineering and Management, 151(2): 04024204, ISSN 0733-9364

Gupta, R and Chandiwala, S (2010) Understanding occupants: Feedback techniques for large-scale low-carbon domestic refurbishments. Building Research & Information, 38(5), pp. 530-548. ISSN 0961-3218

Gupta, R; Gregg, M and Cherian, R (2020) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(1), pp. 228-255. ISSN 23984708

Gupta, R; Gregg, M; Manu, S; Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(1), pp. 56-74. ISSN 0961-3218

Gurmu, A.; Galluzzo, A. and Kite, J. (2021) Modelling customers' perception of the quality of services provided by builders: A case of Victoria, Australia. Construction Economics and Building, 21(1), pp. 100-124. ISSN 2204-9029

Gurmu, A T; Krezel, A and Mahmood, M N (2023) Analysis of the causes of defects in ground floor systems of residential buildings. International Journal of Construction Management, 23(2), pp. 268-275. ISSN 1562-3599

Gussias, A (2002) Service life management of concrete harbour structures. DrIng thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Guzman de la Cruz, A L (1998) Cost-performance criteria for seismic retrofitting. PhD thesis, University of Puerto Rico, Mayaguez, Puerto Roco.

Gyadu-Asiedu, W; Danso, H and Asubonteng, J A (2013) Assessment of the performance of local and foreign road construction firms in Ghana. International Journal of Construction Management, 13(4), pp. 53-73. ISSN 1562-3599

Ha, D. K. (2026) An evaluation and comparison of critical factors contributing to falls-from-height hazards in Vietnamese building projects. Journal of Engineering, Design and Technology, 24(3), pp. 831-858. ISSN 1726-0531

Hacker, M E; Kaminsky, J; Faust, K M and Rauch, S (2020) Regulatory enforcement approaches for mass population displacement. Journal of Construction Engineering and Management, 146(5): 1820, ISSN 0733-9364

Hadidi, L A (2016) Using quality function deployment to conduct assessment for engineering designs' contractors. Architectural Engineering and Design Management, 12(3), pp. 205-230. ISSN 1745-2007

Hadikusumo, B H W (2001) Virtually real construction site processes: hazard identification and accident precaution planning using design-for-safety-process (DFSP) tool. PhD thesis, University of Hong Kong, Hong Kong.

Hajirasouli, A; Banihashemi, S; Drogemuller, R; Fazeli, A and Mohandes, S R (2022) Augmented reality in design and construction: Thematic analysis and conceptual frameworks. Construction Innovation, 22(3), pp. 412-443. ISSN 1471-4175

Hall, M and Tomkins, C (2001) A cost of quality analysis of building project: Towards a complete methodology for design and build. Construction Management and Economics, 19(7), pp. 727-740. ISSN 01446193

Halloul, A H (2023) Relationships between leading and trailing indicators at construction sites in Yanbu Industrial City, Saudi Arabia. PhD thesis, University of South Florida, USA.

Hallowell, M and Toole, T M (2009) Contemporary design-bid-build model. Journal of Construction Engineering and Management, 135(6), pp. 540-549. ISSN 0733-9364

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hamed, O (2022) Developing a BIM-based tool to automate green buildings assessment: the case of Jordan Green Building Guide. PhD thesis, University of Sheffield, UK.

Hamilton, I G; Summerfield, A J; Steadman, J P; Stone, A and Davies, M (2010) Exploring energy integration between new and existing developments. Building Research & Information, 38(6), pp. 593-609. ISSN 0961-3218

Hamledari, H; Sajedi, S; McCabe, B and Fischer, M (2021) Automation of inspection mission planning using 4D bims and in support of unmanned aerial vehicle-based data collection. Journal of Construction Engineering and Management, 147(3): 4020179, ISSN 0733-9364

Hamza, N and Greenwood, D (2007) The impact of procurement methods on delivering environmentally sensitive buildings. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Han, S (2024) Understanding of AI-aided reality capture data for the development of BIM modeling for building façade inspections. PhD thesis, Marquette University, USA.

Han, W; Xu, L; Mouri, M M; Loh, W Y; Dai, F and Zhu, Z (2025) Drone flights and worker visual attention: A quantitative study of distraction and hazard awareness. Journal of Construction Engineering and Management, 151(11): 04025173, ISSN 0733-9364

Haponava, T and Al-Jibouri, S (2010) Influence of process performance during the construction stage on achieving end-project goals. Construction Management and Economics, 28(8), pp. 853-869. ISSN 1466433X

Harputlugil, G U; Harputlugil, T and De Wilde, P (2009) Thermal design of Turkish schools: Prospects for an improved pre-design process. Architectural Engineering and Design Management, 5(3), pp. 153-164. ISSN 1745-2007

Harun, A N (2015) The application of mobile web and devices for environmental surveillance on construction sites in Malaysia. PhD thesis, University of Salford, UK.

Hasan, A; Ahn, S; Rameezdeen, R and Baroudi, B (2021) Investigation into post-adoption usage of mobile icts in Australian construction projects. Engineering, Construction and Architectural Management, 28(1), pp. 351-371. ISSN 0969-9988

Hassanain, M A; Aljuhani, M; Sanni-Anibire, M O and Abdallah, A (2019) Interdisciplinary design checklists for mechanical, electrical and plumbing coordination in building projects. Built Environment Project and Asset Management, 9(1), pp. 29-43. ISSN 2044-124X

Hassanain, M A; Mathar, H and Aker, A (2016) Post-occupancy evaluation of a university student cafeteria. Architectural Engineering and Design Management, 12(1), pp. 67-77. ISSN 1745-2007

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2024) An assessment of users' satisfaction with a smart building on university campus through post-occupancy evaluation. Journal of Engineering, Design and Technology, 22(4), pp. 1119-1135. ISSN 1726-0531

Hay, R; Samuel, F; Watson, K J and Bradbury, S (2018) Post-occupancy evaluation in architecture: Experiences and perspectives from UK practice. Building Research & Information, 46(6), pp. 698-710. ISSN 0961-3218

He, C; Liu, M; Hsiang, S M; Pierce, N; Megahed, S and Godfrey, A (2025) An ontological knowledge-driven smart contract framework for implicit bridge preservation decision making. Journal of Construction Engineering and Management, 151(4): 04025008, ISSN 0733-9364

He, Q and Ng, S T (2017) Energy-efficient window retrofit for existing high-rise residential buildings with the consideration of mutual shading. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Hellwig, R T (2015) Perceived control in indoor environments: A conceptual approach. Building Research & Information, 43(3), pp. 302-315. ISSN 0961-3218

Henriques, D F; Clara, M P and Flores-Colen, I (2023) Inspection and structural assessment of traditional timber floors: A practical systematization. International Journal of Building Pathology and Adaptation, 41(3), pp. 675-691. ISSN 23984708

Herabat, P (1997) A functional specification for a decision support system to select bridge analysis tools. PhD thesis, Carnegie Mellon University, USA.

Heravi, G and Jafari, A (2014) Cost of quality evaluation in mass-housing projects in developing countries. Journal of Construction Engineering and Management, 140(5): 04014004, ISSN 0733-9364

Heravi Torbati, Amir Hossein (2014) Improving construction management: An investigation into the influences of effective stakeholder involvement on project quality outcomes. PhD thesis, Queensland University of Technology, Australia.

Herazo, Benjamin (2017) The influence of sustainability in project management practices in the building sector. PhD thesis, Université de Montréal, Canada.

Hernandez, W (2017) Development of a sustainable quality assurance program for transporation infrastructure. PhD thesis, University of Rhode Island, USA.

Hernandezgaytan, V H (2022) The reemergence of a geotechnical, special inspection, and construction material testing firm. DEng thesis, Texas A&M University, USA.

Hesselink, L; Vahdatikhaki, F; Harmsen, Y and Voordijk, H (2024) Usability analysis of virtual-reality-enabled digital twin for the inspection of sewage pumping stations. International Journal of Construction Management, 24(13), pp. 1419-1430. ISSN 1562-3599

Hewitt, E L; Andrews, C J; Senick, J A; Wener, R E; Krogmann, U and Sorensen Allacci, M (2016) Distinguishing between green building occupants' reasoned and unplanned behaviours. Building Research & Information, 44(2), pp. 119-134. ISSN 0961-3218

Hidayat, B (2013) The role of knowledge communication in the effective management of post-disaster reconstruction projects in Indonesia. PhD thesis, University of Salford, UK.

Hiete, M; Kühlen, A and Schultmann, F (2011) Analysing the interdependencies between the criteria of sustainable building rating systems. Construction Management and Economics, 29(4), pp. 323-328. ISSN 1466433X

Hijazi, A A; Das, P; Li, Y; Moehler, R C and Maxwell, D W (2026) A contingency approach to platform implementation: Platform types, attributes, and value chain integration. Building Research & Information, 54(1), pp. 4-23. ISSN 0961-3218

Hinze, J and Godfrey, R (2003) An evaluation of safety performance measures for construction projects. Journal of Construction Research, 4(1), pp. 5-15. ISSN 1609-9451

Hitchcock, R J (1996) Improving life-cycle information management through documentation of project objectives and design rationale. PhD thesis, University of California, Berkeley, USA.

Hitt, S J; Hairstans, R; Oloke, D; Bertasso, S; Tamagnone, G and Shirley, B (2024) Developing modern construction professionals with a focus on timber – a UK case study. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(1), pp. 32-40. ISSN 17514304

Hollis, M and Bright, K (1999) Surveying the survey. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Holmes, S H and Reinhart, C F (2013) Assessing future climate change and energy price scenarios: Institutional building investment. Building Research & Information, 41(2), pp. 209-222. ISSN 0961-3218

Holt, G D (1997) Classifying construction contractors: A case study using cluster analysis. Building Research & Information, 25(6), pp. 374-382. ISSN 0961-3218

Holt, G D and Edwards, D J (2014) Machinery transportation management: Case study of "plant-trailer" H&S incidents. Built Environment Project and Asset Management, 4(3), pp. 264-280. ISSN 2044-124X

Holt, G D; Olomolaiye, P O and Harris, F C (1994) Evaluating performance potential in the selection of construction contractors. Engineering, Construction and Architectural Management, 1(1), pp. 29-50. ISSN 0969-9988

Hong, X (2002) A comparative study of contractor performance based on Japanese, UK and US construction practice. PhD thesis, University of Wolverhampton, UK.

Hong, Z; Hong, Y; Cai, H; Abraham, D M; Zhang, J and Dunston, P S (2025) BIM-based framework for in-plant quality control of precast concrete manufacturing. Journal of Construction Engineering and Management, 151(12): 05025017, ISSN 0733-9364

Hopfe, C J (2009) Uncertainty and sensitivity analysis in building performance simulation for decision support and design optimization. PhD thesis, Eindhoven University of Technology, Netherlands.

Hoque, M I and Hasan, M (2025) Factors affecting the construction quality in Bangladesh. International Journal of Building Pathology and Adaptation, 43(3), pp. 321-337. ISSN 2398-4708

Hovde, G O (1995) Fatigue and overload reliability of offshore structural systems, considering the effect of inspection and repair. DrIng thesis, Universitetet i Trondheim Norges Tekniske Hogskole, Norway.

Hsie, M (1994) Computer-aided acceptance planning: Generating quality acceptance parameters and stratified sampling plans through neural network learning ability and CAD modeling. PhD thesis, Purdue University, USA.

Hsieh, H Y and Forster, J (2006) Residential construction quality and production levels in Taiwan. Engineering, Construction and Architectural Management, 13(5), pp. 502-520. ISSN 0969-9988

Hsieh, T-Y (1993) Functional requirements for large-scale manipulators in industrial construction. PhD thesis, University of Texas at Austin, USA.

Hu, M (2023) An evaluation of the retrofit net zero building performances: Life cycle energy, emissions and cost. Building Research & Information, 51(2), pp. 179-191. ISSN 0961-3218

Huang, J; Han, D; Zhang, H and Cui, W (2024) Framework and case study for the assembly accuracy prediction of prefabricated buildings using BIM and tls. Architectural Engineering and Design Management, 20(6), pp. 1427-1453. ISSN 1745-2007

Huang, R Y (2006) A performance-based bridge LCCA model using visual inspection inventory data. Construction Management and Economics, 24(10), pp. 1069-1081. ISSN 1466433X

Huang, X and Bernold, L E (1997) CAD-integrated excavation and pipe laying. Journal of Construction Engineering and Management, 123(3), pp. 318-323. ISSN 0733-9364

Huang, Y C (2006) Graphical-based multistage scheduling method for RC buildings. Construction Management and Economics, 24(1), pp. 5-18. ISSN 01446193

Hubbard, B and Hubbard, S (2023) Utilization of uas data by transportation agencies: Building on the experience of construction contractors. International Journal of Construction Management, 23(4), pp. 679-685. ISSN 1562-3599

Hughes, A J (2022) On risk-based decision-making for structural health monitoring. PhD thesis, University of Sheffield, UK.

Hughes, B; Edwards, D J; Martek, I; Chileshe, N and Thwala, W D (2022) Assessing the "clerk of works" role in delivering quality affordable housing: A UK case study. Smart and Sustainable Built Environment, 11(4), pp. 996-1016. ISSN 2046-6099

Hughes, J O; Pallin, S; Aldykiewicz, A J and Clark, C J (2021) Installation quality framework: Investment return approach for energy savings on building product installation. Journal of Construction Engineering and Management, 147(11): 04021158, ISSN 0733-9364

Hugill, D J (2001) An examination of project management team meetings in railway construction. PhD thesis, University of Manchester, UK.

Hung, C-C (1999) A study of factors affecting the implementation of ISO 9000 in Taiwan's construction industry. DIT thesis, University of Northern Iowa, USA.

Hussain, R.; Albeaino, G.; Nnaji, C.; Abraham, Y.; Rambo-Hernandez, K. and Akanmu, A. (2026) Impact of interaction techniques on performance in virtual reality-based drone training for construction. Construction Innovation, 26(9), pp. 115-134. ISSN 1471-4175

Huynh, N. M.; Bui, P. T.; Le-Hoai, L. and Tang, M. N. (2026) Prioritizing actions to mitigate causes of material waste in construction using quality function deployment. Construction Economics and Building, 26(2), ISSN 2204-9029

Huynh, H T (2021) Game theory applications in construction project management. PhD thesis, Catholic University of America, USA.

Ibrahim, K; Okanlawon, T T; Oyewobi, L O; Badamasi, A; Dodo, M and Jimoh, R A (2026) Construction 4.0: Enhancing sustainable construction practices by evaluating digital twin barriers in the Nigerian AEC industry. Engineering, Construction and Architectural Management, 33(1), pp. 258-283. ISSN 0969-9988

Idan, C K (2003) Quality function deployment (QFD) in the UK construction industry. PhD thesis, Nottingham Trent University, UK.

Idoro, G (2012) Comparing levels of use of project plans and performance of traditional contract and design-build construction projects in Nigeria. Journal of Engineering, Design and Technology, 10(1), pp. 7-33. ISSN 1726-0531

Idoro, G I (2011) Effect of mechanisation on occupational health and safety performance in the Nigerian construction industry. Journal of Construction in Developing Countries, 16(2), pp. 27-45. ISSN 1823-6499

Ikediashi, D I; Ogunlana, S O and Odesola, I A (2015) Service quality and user satisfaction of outsourced facilities management services in Nigeria's public hospitals. Built Environment Project and Asset Management, 5(4), pp. 363-379. ISSN 2044-124X

Ikuabe, M; Clinton, C; Ebekozien, A and Mambane, S (2025) Contextualising the challenges of the built environment programme accreditation in HEIs in South Africa. International Journal of Building Pathology and Adaptation, 43(8), pp. 108-123. ISSN 2398-4708

Ikuabe, M; Aigbavboa, C and Kissi, E (2023) Potential applications and benefits of humanoids in the construction industry: A south African perspective. International Journal of Building Pathology and Adaptation, 41(6), pp. 254-268. ISSN 23984708

Ireland, V (1985) The role of managerial actions in the cost, time and quality performance of high-rise commercial building projects. Construction Management and Economics, 3(1), pp. 59-87. ISSN 01446193

Isaacs, N; Saville-Smith, K; Camilleri, M and Burrough, L (2010) Energy in New Zealand houses: Comfort, physics and consumption. Building Research & Information, 38(5), pp. 470-480. ISSN 0961-3218

Islam, M H; Safayet, M A and Al Mamun, A (2024) Building performance analysis for optimizing the energy consumption of an educational building. International Journal of Building Pathology and Adaptation, 42(4), pp. 576-595. ISSN 23984708

Ismaeel, W S E (2022) Sustainable site selection using system dynamics; case study LEED-certified project. Architectural Engineering and Design Management, 18(4), pp. 368-386. ISSN 1745-2007

Ismaeel, W S E; Alamoudy, F O and Sameh, R (2023) How renovation activities may jeopardise indoor air quality: Accounting for short and long-term symptoms of sick building syndrome in educational buildings. Architectural Engineering and Design Management, 19(4), pp. 360-377. ISSN 1745-2007

Ismail, N M M I (2015) Factors in building design that improve building maintainability in Malaysia. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Ismail, Z A (2023) Improving failure risk by better planning and safety for precast beam-to-column connection elements using physical internet-enabled building information modeling technology: A Malaysian case study. International Journal of Building Pathology and Adaptation, 41(3), pp. 517-532. ISSN 23984708

Israel, B (2023) The impact of clients' procurement challenges on the substance goals of roads construction projects in songwe, Tanzania. International Journal of Construction Management, 23(12), pp. 2144-2150. ISSN 1562-3599

Jaenglom, Kamonmarn (2014) Exploring construction supply chain management: A systematic perspective for creating sustainable performance. PhD thesis, Università degli Studi di Bergamo, Italy.

Jafari, A (2013) A contractor pre-qualification model based on the quality function deployment method. Construction Management and Economics, 31(7), pp. 746-760. ISSN 1466433X

Jain, Nishesh (2021) Reducing the performance gap using calibrated simulation models. PhD thesis, University College London, UK.

Jamalizadeh, A.; Kargar, V.; Haghighi, A.; Jahangiri, M.; Alimohammadlou, M. and Kamalinia, M. (2026) Identification and prioritization of preventive measures for crane overturning to enhance safety in asymmetric tandem lifting: Fuzzy logic approach. Journal of Construction Engineering and Management, 152(8): 04026126, ISSN 0733-9364

Janda, K B and Parag, Y (2013) A middle-out approach for improving energy performance in buildings. Building Research & Information, 41(1), pp. 39-50. ISSN 0961-3218

Janda, K B and Topouzi, M (2015) Telling tales: Using stories to remake energy policy. Building Research & Information, 43(4), pp. 516-533. ISSN 0961-3218

Jarkas, A M (2015) Factors influencing labour productivity in Bahrain's construction industry. International Journal of Construction Management, 15(1), pp. 94-108. ISSN 1562-3599

Jarkas, A M and Bitar, C G (2014) Factors affecting construction labor productivity in Kuwait. Journal of Construction Engineering and Management, 138(7), pp. 811-820. ISSN 0733-9364

Jaselskis, E J; Anderson, S D and Russell, J S (1996) Strategies for achieving excellence in construction safety performance. Journal of Construction Engineering and Management, 122(1), pp. 61-70. ISSN 0733-9364

Jens, K and Gregg, J S (2022) Building performances in open and enclosed spaces: A method for balancing operational costs and space utilization with a focus on user needs and satisfaction. Architectural Engineering and Design Management, 18(2), pp. 149-164. ISSN 1745-2007

Jensen, E and Koch, C (2003) Making large infrastructure projects safe: The case of the Copenhagen Metro. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Jensen, P A (2012) Knowledge transfer from facilities management to building projects: A typology of transfer mechanisms. Architectural Engineering and Design Management, 8(3), pp. 170-179. ISSN 1745-2007

Jeon, J; Lee, J and Ham, Y (2019) Quantifying the impact of building envelope condition on energy use. Building Research & Information, 47(4), pp. 404-420. ISSN 0961-3218

Jeon, J; Zhang, Y; Yang, L; Xu, X; Cai, H and Tran, D (2023) Risk breakdown matrix for risk-based inspection of transportation infrastructure projects. Journal of Construction Engineering and Management, 149(4): 04023007, ISSN 0733-9364

Jeong, W S (2014) Integrating building information modeling with object-oriented physical modeling for building thermal simulation. PhD thesis, Texas A&M University, USA.

Ji, W and Abourizk, S M (2018) Data-driven simulation model for quality-induced rework cost estimation and control using absorbing Markov chains. Journal of Construction Engineering and Management, 144(8): 04018078, ISSN 0733-9364

Ji, W; Abourizk, S M; Zaïane, O R and Li, Y (2018) Complexity analysis approach for prefabricated construction products using uncertain data clustering. Journal of Construction Engineering and Management, 144(8): 04018063, ISSN 0733-9364

Ji, Wenying (2018) Simulation-based analytics for fabrication quality-associated decision support. PhD thesis, University of Alberta, Canada.

Jia, M and Zhao, L (2025) Evolutionary analysis of information-based construction management promotion using a government-enterprise evolutionary game model. Engineering, Construction and Architectural Management, 32(1), pp. 349-373. ISSN 0969-9988

Jiang, A (2005) A decision support model for cost and activity-based performance measurement in steel construction. PhD thesis, University of Florida, USA.

Jiang, S; Wang, S; Sun, H; Liu, W; Xiao, B; Cha, H S and Zhang, J (2025) Enhancing quality management: Lightweight detection and risk warning of concrete cracks and rebar exposure using improved YOLOv8. Journal of Construction Engineering and Management, 151(8): 04025087, ISSN 0733-9364

Jiang, W; Ding, L and Zhou, C (2021) Cyber physical system for safety management in smart construction site. Engineering, Construction and Architectural Management, 28(3), pp. 788-808. ISSN 0969-9988

Jiang, X; Sun, H; Lu, K; Lyu, S and Skitmore, M (2023) Using evolutionary game theory to study construction safety supervisory mechanism in China. Engineering, Construction and Architectural Management, 30(2), pp. 514-537. ISSN 0969-9988

Jiang, Z; Han, Y; Cheng, Y; Wang, Z and Meng, H (2025) An improved yolov8-dyhead-wiseiou model for positioning and counting detection of grouting sleeves in a prefabricated wall. Journal of Construction Engineering and Management, 151(4): 04025016, ISSN 0733-9364

Jiang, Ziang (2025) Advancing scan-vs-BIM in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jiang, Ziang (2025) Advancing scan-vs-bim in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jimenez-Roa, Lisandro Arturo (2020) Data-driven damage detection for bridges through vibration structural health monitoring. EngD thesis, University of Twente, Netherlands.

Joao, Z R (2021) Road construction assessment model (RC-AM) to prevent contract overbilling in Angola. PhD thesis, George Washington University, USA.

Jobe, K (2017) A flexible housing approach for self-help housing in Botswana. PhD thesis, University of Bath, UK.

John Samuel, I (2023) A human-centered infrastructure asset management framework using BIM and augmented reality. PhD thesis, George Mason University, USA.

Johnson, B T (2007) Exploring the use of virtual construction to capture knowledge and reduce waste for residential projects. PhD thesis, Colorado State University, USA.

Johnsson, H and Meiling, J H (2009) Defects in offsite construction: Timber module prefabrication. Construction Management and Economics, 27(7), pp. 667-681. ISSN 1466433X

Johnston, D; Farmer, D; Brooke-Peat, M and Miles-Shenton, D (2016) Bridging the domestic building fabric performance gap. Building Research & Information, 44(2), pp. 147-159. ISSN 0961-3218

Jones, K; Desai, A; Brosnan, N; Cooper, J and Ali, F (2017) Built asset management climate change adaptation model. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 263-274. ISSN 1759-5916

Jonsson, A Z and Muyingo, H (2019) Building inspection in multi-dwelling housing and the perception of building quality. Construction Economics and Building, 19(2), pp. 144-159. ISSN 2204-9029

Joyner, M D (2021) Resilience-based performance evaluation and design of buildings for multiple hazards. PhD thesis, Northeastern University, USA.

Kaatz, E; Root, D and Bowen, P (2005) Broadening project participation through a modified building sustainability assessment. Building Research & Information, 33(5), pp. 441-454. ISSN 0961-3218

Kaatz, E; Root, D S; Hilland, R C and Bowen, P A (2006) Fostering sustainability and enhancing quality in construction with building sustainability assessment. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kado, D and Bala, K (2015) Pareto analysis on the quality sections/factors prevalence of Nigerian design firms. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Kagan, H A; Leary, D J and Pratter, G E K (1986) Design engineers' responsibilities during construction. Journal of Construction Engineering and Management, 112(3), pp. 394-402. ISSN 0733-9364

Kakitahi, J M; Alinaitwe, H M; Landin, A and Mone, S J (2016) Impact of construction-related rework on selected Ugandan public projects. Journal of Engineering, Design and Technology, 14(2), pp. 238-251.

Kalantari, S; Shepley, M M; Rybkowski, Z K and Bryant, J (2017) Designing for operational efficiency: Facility managers' perspectives on how their knowledge can be better incorporated during design. Architectural Engineering and Design Management, 13(6), pp. 457-478. ISSN 1745-2007

Kalantari Hematabadi, S S (2014) Toward an effective design process: Enhancing building performance through better integration of facility management perspectives in the design process. PhD thesis, Texas A&M University, USA.

Kale, S and Arditi, D (2006) Diffusion of ISO 9000 certification in the precast concrete industry. Construction Management and Economics, 24(5), pp. 485-495. ISSN 1466433X

Kalz, D E; Pfafferott, J; Herkel, S and Wagner, A (2009) Building signatures correlating thermal comfort and low-energy cooling: In-use performance. Building Research & Information, 37(4), pp. 413-432. ISSN 0961-3218

Kam, C W (2000) Quality assurance of construction works in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Kamar, K A M (2011) Critical success factors to industrialised building system (IBS) contractor. PhD thesis, University of Salford, UK.

Kamara, J M; Anumba, C J and Hobbs, B (1999) From briefing to client requirements processing. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Kamari, M and Ham, Y (2025) Advancing 3D object detection and segmentation in construction jobsites using an open vocabulary approach. Journal of Construction Engineering and Management, 151(10): 04025141, ISSN 0733-9364

Kampschroer, K and Heerwagen, J H (2005) The strategic workplace: Development and evaluation. Building Research & Information, 33(4), pp. 326-337. ISSN 0961-3218

Kang, K; Xiao, J and Moon, S (2025) Evaluating safety risks in pedestrian facilities for different ride modes: Application of a deep learning-based 3D scanning system. Journal of Construction Engineering and Management, 151(11): 04025183, ISSN 0733-9364

Kannimuthu, M; Raphael, B; Palaneeswaran, E and Kuppuswamy, A (2019) Optimizing time, cost and quality in multi-mode resource-constrained project scheduling. Built Environment Project and Asset Management, 9(1), pp. 44-63. ISSN 2044-124X

Kant Jain, K and Bhattacharjee, B (2012) Application of fuzzy concepts to the visual assessment of deteriorating reinforced concrete structures. Journal of Construction Engineering and Management, 138(3), pp. 399-408. ISSN 0733-9364

Kantola, M and Saari, A (2014) Commissioning for nearly zero-energy building projects. Construction Innovation, 14(3), pp. 370-382. ISSN 1471-4175

Kapogiannis, G (2013) A conceptual framework for project managers to improve projects performance. PhD thesis, University of Salford, UK.

Kapogiannis, G; Fernando, T and Alkhard, A M (2021) Impact of proactive behaviour antecedents on construction project managers' performance. Construction Innovation, 21(4), pp. 708-722. ISSN 1471-4175

Karimi, S (2021) A systematic methodology for evaluating and balancing acceptance risks with pay factors for highway construction materials. PhD thesis, University of Maryland, College Park, USA.

Karunyasopon, P; Park, D Y; Le, D M and Chang, S (2024) Performance analysis of transparent BIPV/T double skin façades integrated with the decision-making algorithm for mixed-mode building ventilation. Architectural Engineering and Design Management, 20(5), pp. 1141-1163. ISSN 1745-2007

Kashiwagi, D; Chong, N; Costilla, M; McMenimen, F and Egbu, C (2004) Impact of six sigma on construction performance. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Kashiwagi, D; Parmar, D and Savicky, J (2003) Case study of the impact of specifications, construction management and inspection on construction performance. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Kazar, G; Doǧan, N B; Ayhan, B U and Tokdemir, O B (2022) Quality failures-based critical cost impact factors: Logistic regression analysis. Journal of Construction Engineering and Management, 148(12): 04022138, ISSN 0733-9364

Keenan, M and Rostami, A (2021) The impact of quality management systems on construction performance in the North West of England. International Journal of Construction Management, 21(9), pp. 871-883. ISSN 1562-3599

Kelly, D and Ilozor, B (2022) Performance outcome assessment of the integrated project delivery (IPD) method for commercial construction projects in USA. International Journal of Construction Management, 22(14), pp. 2808-2816. ISSN 1562-3599

Kere, K J (2023) Probabilistic model development and risk management strategies for pipelines with anomalies. PhD thesis, Marquette University, USA.

Keskin, F S (2021) Integration of lifecycle assessment into structural intervention scenarios for assessing environmental impacts of vulnerable buildings. PhD thesis, University of Birmingham, UK.

Kesuma, P A; Rohman, M A and Arif Prastyanto, C (2022) Analysing the root cause of the damage risk in heavy vehicles to reduce traffic congestion. International Journal of Construction Management, 22(10), pp. 1872-1883. ISSN 1562-3599

Ketter, Jeremy Kevin (2008) The utilization of consultant construction management and construction inspection services by state departments of transportation. PhD thesis, University of Pittsburgh, USA.

Key, M A (2016) Regulating sustainable development: An enabling model for consistent collaboration between planning and building control services in England. DProf thesis, University of Salford, UK.

Khajuria, A (1994) Quality assurance of concrete using a hybrid knowledge-based expert system. PhD thesis, Rutgers State University of New Jersey, School of Graduate Studies, USA.

Khalfan, M M A; Anumba, C J and Carrillo, P M (2001) Concurrent engineering readiness assessment of sub-contractors within the UK construction industry. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Khalfan, M M A; Anumba, C J and Carrillo, P M (2005) Concurrent engineering readiness assessment tool for construction. Architectural Engineering and Design Management, 1(3), pp. 163-179. ISSN 1745-2007

Khalil, N (2016) Incorporating risk mitigation into building performance rating tools (BPRTS) for Malaysia’s higher education building. PhD thesis, University of Malaya, Malaysia.

Khanh, H. D.; Tiep, N. V. and Nguyen, K. V. (2026) EFA models for evaluating stakeholder perceptions of falls-from-height risks in building projects: A case study from Vietnam. Journal of Engineering, Design and Technology, 24(6), pp. 1483-1509. ISSN 1726-0531

Khatatbeh, A A (2023) Quantifying the impact of ISO 9001 standard on the project and engineering management and success factors; a case of construction industry. Engineering, Construction and Architectural Management, 30(6), pp. 2564-2581. ISSN 0969-9988

Khesal, T; Saghaei, A; Khalilzadeh, M; Rahiminezhad Galankashi, M and Soltani, R (2019) Integrated cost, quality, risk and schedule control through earned value management (EVM). Journal of Engineering, Design and Technology, 17(1), pp. 183-203. ISSN 1726-0531

Khorrami Shad, H; Tak Wing Yiu, K; Lovreglio, R and Feng, Z (2024) State-of-the-art analysis of the integration of augmented reality with construction technologies to improve construction safety. Smart and Sustainable Built Environment, 13(6), pp. 1434-1449. ISSN 2046-6099

Khoshbakht Iradmoosa, Maryam (2019) Building performance studies for higher education campus buildings: Energy use, occupant satisfaction and thermal comfort. PhD thesis, Griffith University, Australia.

Khoury, H M (2009) Context-aware information access and retrieval for rapid on-site decision making in construction, inspection and maintenance of constructed facilities. PhD thesis, University of Michigan, USA.

Kiani, H (1998) A model for measuring effectiveness of building construction organisations: Owner's perspective. PhD thesis, University of Waterloo, USA.

Killip, G (2020) A reform agenda for UK construction education and practice. Buildings & Cities, 1(1), pp. 525-537. ISSN 2632-6655

Kim, D.; Yang, J.; Lee, D.; Lee, D.; Rahimian, F. and Park, C. (2026) Blockchain-enhanced computer vision approach for remote safety inspection in construction. Engineering, Construction and Architectural Management, 33(3), pp. 1907-1931. ISSN 0969-9988

Kim, H and Ham, Y (2021) Increasing reliability of participatory sensing for utility pole condition assessment using fuzzy inference. Journal of Construction Engineering and Management, 147(1): 0001968, ISSN 0733-9364

Kim, Jungsoo (2014) Impact of indoor environmental quality (IEQ) factors on occupant evaluation of workspaces. PhD thesis, University of Sydney, Australia.

Kim, M (2017) Noncontact quality assessment of precast concrete elements using 3D laser scanning and building information modeling. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Kim, Y W and Kim, S C (2011) Cost analysis of information technology-assisted quality inspection using activity-based costing. Construction Management and Economics, 29(2), pp. 163-172. ISSN 1466433X

King, L M; Booth, C A and Lamond, J E (2014) Benefits and limitations of social practice theory to evaluate practices in sustainable office buildings: Preliminary findings. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Kirby, M; Rotimi, F E and Naismith, N (2025) Factors for improving productivity in the New Zealand residential construction sector. Journal of Engineering, Design and Technology, 23(5), pp. 1712-1728. ISSN 1726-0531

Kit Miyamoto, H; Gilani, A S J and Wada, A (2011) Damage mitigation for school buildings in seismically vulnerable regions. International Journal of Disaster Resilience in the Built Environment, 2(1), pp. 8-29. ISSN 1759-5916

Kleindienst, S and Andersen, M (2012) Comprehensive annual daylight design through a goal-based approach. Building Research & Information, 40(2), pp. 154-173. ISSN 0961-3218

Knos, C T (2001) Investigating the effects of insurance industry standards on public building inspection departments in Florida, Georgia, and South Carolina. DPA thesis, University of Georgia, USA.

Ko, W H (2021) View and environmental quality in buildings. PhD thesis, University of California, Berkeley, USA.

Koch, C and Buser, M (2020) Good enough quality: Multiple quality cultures in a Swedish region. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Koch, C and Larsen, C S (2006) Quality in construction: A supply chain perspective. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Koch, C and Schultz, C S (2019) The production of defects in construction: an agency dissonance. Construction Management and Economics, 37(9), pp. 499-512. ISSN 01446193

Koch, C and Vogelius, P (2006) Evaluation of web and pda-based quality assurance system on a building site. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Koehn, E (1975) Probabilistic system for project management. PhD thesis, Wayne State University, USA.

Kong, R; Bai, S; Tang, C; Liang, Y; Wang, Q and Li, M (2026) A multidimensional factor evaluation method for tunnel contour quality assessment using lidar scanning data. Journal of Construction Engineering and Management, 152(3): 04025274, ISSN 0733-9364

Koo, H J and O’Connor, J T (2022) Building information modeling as a tool for prevention ofdesign defects. Construction Innovation, 22(4), pp. 870-890. ISSN 1471-4175

Korkmaz, S (2007) Piloting evaluation metrics for high performance green building project delivery. PhD thesis, Pennsylvania State University, USA.

Koskisto, O (1997) Reliability-based optimization of plant precast concrete building systems. PhD thesis, Johns Hopkins University, USA.

Kouch, K A; Panuwatwanich, K; Sancharoen, P and Sahachaisaree, S (2021) Development of augmented reality application for onsite inspection of expressway structures using microsoft hololens. Journal of Construction in Developing Countries, 26(2), pp. 87-116. ISSN 1823-6499

Kraft, E R (2013) Alternative quality assurance organizations for highway design and construction projects. PhD thesis, University of Colorado at Boulder, USA.

Krishnaraj, L; Kumar, V R P; Balasubramanian, M; Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(1), pp. 31-40. ISSN 1562-3599

Krystallis, I; Demian, P and Price, A D F (2015) Using BIM to integrate and achieve holistic future-proofing objectives in healthcare projects. Construction Management and Economics, 33(11-12), pp. 890-906. ISSN 01446193

Kuennen, S T (2002) Construction management practice in the execution of military construction projects. DEng thesis, Texas A&M University, USA.

Kukoyi, P O; Simpeh, F; Adebowale, O J and Agumba, J N (2022) Managing the risk and challenges of COVID-19 on construction sites in Lagos, Nigeria. Journal of Engineering, Design and Technology, 20(1), pp. 99-144. ISSN 1726-0531

Kumar, S; Dhingra, A and Singh, B (2018) Lean-kaizen implementation: A roadmap for identifying continuous improvement opportunities in Indian small and medium sized enterprise. Journal of Engineering, Design and Technology, 16(1), pp. 143-160.

Kumaraswamy, M M (1996) The pursuit of quality in Hong Kong construction. Engineering, Construction and Architectural Management, 3(4), pp. 289-306. ISSN 0969-9988

Kumaraswamy, M M; Ng, S T; Ugwu, O O; Palaneeswaran, E and Rahman, M M (2004) Empowering collaborative decisions in complex construction project scenarios. Engineering, Construction and Architectural Management, 11(2), pp. 133-142. ISSN 0969-9988

Kwafo, D G (2021) Strategies for improving performance of project managers in Ghana to reduce delays. PhD thesis, Walden University, USA.

Känsälä, K; Rantala, S; Kauppila, O and Leviäkangas, P (2018) Acceleration sensor technology for rail track asset condition monitoring. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(1), pp. 32-40. ISSN 17514304

Kärnä, S (2009) Concepts and attributes of customer satisfaction in construction. PhD thesis, Aalto University, Finland.

Kübler, O (2006) Applied decision-making in civil engineering. DSc thesis, ETH Zürich, Switzerland.

Kürüm Varolgüneş, F and Şeker, İ H (2026) Sustainable urban resettlement in earthquake zones: Evaluating housing and design strategies post-2023 kahramanmaras earthquake. International Journal of Disaster Resilience in the Built Environment, 17(1), pp. 55-79. ISSN 1759-5908

Labik, O; Nahmens, I; Ikuma, L and Harvey, C (2023) On-site versus in-factory installation of solar-plus-storage in modular construction. Journal of Construction Engineering and Management, 149(5): 05023003, ISSN 0733-9364

Lai, A W Y and Lai, W M (2013) Users' satisfaction survey on building maintenance in public housing. Engineering, Construction and Architectural Management, 20(4), pp. 420-440. ISSN 0969-9988

Lai, A W Y and Pang, P S M (2010) Measuring performance for building maintenance providers. Journal of Construction Engineering and Management, 136(8), pp. 864-876. ISSN 0733-9364

Lai, J H-k (2005) Economic, management and contractual considerations in outsourcing operation and maintenance work for commercial buildings. PhD thesis, Cardiff University, UK.

Lam, E W M; Chan, A P C; Olawumi, T O; Wong, I and Kazeem, K O (2024) Sustainability concepts in global high-rise residential buildings: A scientometric and systematic review. Smart and Sustainable Built Environment, 13(2), pp. 425-443. ISSN 2046-6099

Lam, G T W; Cheung, S O and Ng, S T (1999) The effectiveness of design and build conditions of contract. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Lam, K C; Lam, M C K and Wang, D (2008) MBNQA-oriented self-assessment quality management system for contractors: Fuzzy AHP approach. Construction Management and Economics, 26(5), pp. 447-461. ISSN 1466433X

Lam, P T I (2004) An investigation into the use of specifications in procuring construction works. Journal of Construction Procurement, 10(2),

Lam, P T I; Kumaraswamy, M M and Ng, S T (2004) The use of construction specifications in Singapore. Construction Management and Economics, 22(10), pp. 1067-1079. ISSN 01446193

Lam, W M (2005) A conceptual model of success for design and build projects in the public sector of Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Lambers, R; Cheung, F and Skitmore, M (2024) Risk management strategies for common residential construction defects: The case of Queensland, Australia. International Journal of Construction Management, 24(10), pp. 1126-1135. ISSN 1562-3599

Landin, A (2000) ISO 9001 within the Swedish construction sector. Construction Management and Economics, 18(5), pp. 509-518. ISSN 01446193

Landin, A (2000) Impact of quality management in the Swedish construction process. PhD thesis, Lund University, Sweden.

Landin, A and Nilsson, C H (2001) Do quality systems really make a difference? Building Research & Information, 29(1), pp. 12-20. ISSN 0961-3218

Landin, A M and Persson, M H (1998) Evaluation of quality systems for specialist contractors. Engineering, Construction and Architectural Management, 5(3), pp. 210-219. ISSN 0969-9988

Lang A, G J G C I G S W R (2013) Green choices: The influence of socio-technical parameters on householder decision making in green retrofit projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Langevine, R (2006) A decision support system for the maintenance management of buildings. PhD thesis, University of Alberta, Canada.

Langston, Y L and Langston, C (2007) Building energy and cost performance: An analysis of thirty Melbourne case studies. Construction Economics and Building, 7(1), pp. 1-18. ISSN 2204-9029

Lansley, P (2007) Making sense of research quality assessment. Engineering, Construction and Architectural Management, 14(1), pp. 7-25. ISSN 0969-9988

Laroza, F A R (2025) Investigating construction delays in cold storage projects in the Philippines. International Journal of Construction Management, 25(6), pp. 661-671. ISSN 1562-3599

Larsson, N K (1999) Development of a building performance rating and labelling system in Canada. Building Research & Information, 27(4-5), pp. 332-341. ISSN 0961-3218

Lavy, S and Shohet, I M (2004) Integrated maintenance management of hospital buildings: A case study. Construction Management and Economics, 22(1), pp. 25-34. ISSN 01446193

Lawrence, D J (1983) Real-time concrete quality assurance. Construction Papers, 2(2), pp. 71-77. ISSN 0144-8587

Layzell, J and Ledbetter, S (1998) FMEA applied to cladding systems: reducing the risk of failure. Building Research & Information, 26(6), pp. 351-357. ISSN 0961-3218

Le, N. D.; Tran, D. and Williams, N. J. (2026) Exploring competencies for bridge construction inspectors. Journal of Construction Engineering and Management, 152(9): 04026137, ISSN 0733-9364

Le, A T H; Domingo, N; Rasheed, E and Park, K S (2018) Building maintenance cost planning and estimating: A literature review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Leaman, A and Bordass, B (2001) Assessing building performance in use 4: The probe occupant surveys and their implications. Building Research & Information, 29(2), pp. 129-143. ISSN 0961-3218

Leaman, A and Bordass, B (2007) Are users more tolerant of 'green' buildings? Building Research & Information, 35(6), pp. 662-673. ISSN 0961-3218

Leaman, A; Stevenson, F and Bordass, B (2010) Building evaluation: Practice and principles. Building Research & Information, 38(5), pp. 564-577. ISSN 0961-3218

Leblanc, H; Thomson, C and Cameron, I (2015) Developing a sustainability KM strategy for HA planned works. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(2), pp. 49-65. ISSN 17514304

Ledbetter, W B (1994) Quality performance on successful project. Journal of Construction Engineering and Management, 120(1), pp. 34-46. ISSN 0733-9364

Lee, P. H. and Han, Q. (2026) User-centric sustainable design in mass-customized housing using kano model and quality function deployment. Architectural Engineering and Design Management, 22(2), pp. 308-324. ISSN 1745-2007

Lee, D (2023) Development of a real-time automated mobile robotic welding system in construction. PhD thesis, North Carolina State University, USA.

Lee, D and Han, K (2025) Autonomous navigation and positioning of a real-time and automated mobile robotic welding system. Journal of Construction Engineering and Management, 151(5): 04025033, ISSN 0733-9364

Lee, D E and Arditi, D (2006) Total quality performance of design/build firms using quality function deployment. Journal of Construction Engineering and Management, 132(1), pp. 49-57. ISSN 0733-9364

Lee, H W (2012) Application of target value design to energy efficiency investments. PhD thesis, University of California, Berkeley, USA.

Lee, H W; Choi, K and Gambatese, J A (2014) Real options valuation of phased investments in commercial energy retrofits under building performance risks. Journal of Construction Engineering and Management, 140(6): 5014004, ISSN 0733-9364

Lee, J (2005) Value analysis of Wi-Fi agent functions in construction. PhD thesis, North Carolina State University, USA.

Lee, J; Blumenstein, M; Guan, H and Loo, Y C (2013) Minimising uncertainty in long-term prediction of bridge element. Engineering, Construction and Architectural Management, 20(2), pp. 127-142. ISSN 0969-9988

Lee, Jaeho (2007) A methodology for developing bridge condition rating models based on limited inspection records. PhD thesis, Griffith University, Australia.

Lee, S (2007) Entry decision for unsolicited build-operate-transfer (BOT) highway projects: Real options approach. PhD thesis, University of Colorado at Boulder, USA.

Lee, W V and Steemers, K (2017) Exposure duration in overheating assessments: A retrofit modelling study. Building Research & Information, 45(1-2), pp. 60-82. ISSN 0961-3218

Lei, Z; Sadiq Altaf, M; Cheng, Z; Liu, H and Tang, S (2023) Measurement of information loss and transfer impacts of technology systems in offsite construction processes. Journal of Construction Engineering and Management, 149(9): 05023011, ISSN 0733-9364

Leslie-Carter, R; Zou, P X W and Tan, E X (2009) Managing international projects: A case study of the water cube aquatic centre for Beijing 2008 olympic games. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Leu, S-S (1992) Object-oriented representation model of construction technology information. PhD thesis, University of Michigan, USA.

Lewis, P; Rasdorf, W; Frey, H C; Pang, S H and Kim, K (2009) Requirements and incentives for reducing construction vehicle emissions and comparison of nonroad diesel engine emissions data sources. Journal of Construction Engineering and Management, 135(5), pp. 341-351. ISSN 0733-9364

Li, F; Xu, X; Zhou, J; Chen, J and Zhou, S (2026) Automatic generation of inspection knowledge for highway construction via the integration of computer vision and ontology reasoning. Engineering, Construction and Architectural Management, 33(1), pp. 73-97. ISSN 0969-9988

Li, J.; Chen, Z.; Li, Z.; Kong, L. and Zhang, H. (2026) Integrating computer vision and audio signals for concrete vibration activity recognition and assessment. Journal of Construction Engineering and Management, 152(7): 04026099, ISSN 0733-9364

Li, L; Sandanayake, M; Yang, A; Izadyar, N; Chen, S; O'Brien, D and Vrcelj, Z (2026) A virtual platform for managing building inspections during the construction of detached dwellings. International Journal of Construction Management, 26(2), pp. 295-315. ISSN 1562-3599

Li, M.; Liang, N.; Ma, X. and Chen, J. (2026) Image captioning for automated bridge inspection: A feasibility study. Construction Innovation, pp. 1-30. ISSN 1471-4175

Li, H; Arditi, D and Wang, Z (2012) Transaction-related issues and construction project performance. Construction Management and Economics, 30(2), pp. 151-164. ISSN 1466433X

Li, H; Guo, H L; Skitmore, M; Huang, T; Chan, K Y N and Chan, G (2011) Rethinking prefabricated construction management using the VP-based IKEA model in Hong Kong. Construction Management and Economics, 29(3), pp. 233-245. ISSN 01446193

Li, H; Love, P E D and Drew, D S (2000) Effects of overtime work and additional resources on project cost and quality. Engineering, Construction and Architectural Management, 7(3), pp. 211-220. ISSN 0969-9988

Li, Q; Yang, Y; Yao, G; Wei, F; Xue, G and Qin, H (2024) Multiobject real-time automatic detection method for production quality control of prefabricated laminated slabs. Journal of Construction Engineering and Management, 150(3): 05023017, ISSN 0733-9364

Li, W; Zhang, Y; Lu, D and Augenbroe, G (2020) Quantification methods of natural ventilated building performance in preliminary design. Building Research & Information, 48(4), pp. 401-414. ISSN 0961-3218

Li, Y (2023) Integrated multi-stage decision-support for enhanced infrastructure restoration under uncertainty. PhD thesis, George Mason University, USA.

Liang, H; Weng, Y; Tang, S W Y and Yeoh, J K W (2024) Automated filtering of façade defect images using a similarity method for enhanced inspection documentation. Building Research & Information, 52(1-2), pp. 194-206. ISSN 0961-3218

Liang, Y and Xu, Z (2025) Intelligent inspection of appearance quality for precast concrete components based on improved YOLO model and multi-source data. Engineering, Construction and Architectural Management, 32(3), pp. 1691-1714. ISSN 0969-9988

Liao, C W (2015) Optimal inspection strategies for labor inspection in the construction industry. Journal of Construction Engineering and Management, 141(2): 04014073, ISSN 0733-9364

Liao, P C; Shi, H; Su, Y and Luo, X (2018) Development of data-driven influence model to relate the workplace environment to human error. Journal of Construction Engineering and Management, 144(3): 04018003, ISSN 0733-9364

Licher, Monica Katherine (2016) Estimating post-construction costs of a changing urban stormwater program. PhD thesis, Virginia Tech, USA.

Likita, A J; Jelodar, M B; Vishnupriya, V and Rotimi, J O B (2024) Lean and BIM integration benefits construction management practices in New Zealand. Construction Innovation, 24(1), pp. 106-133. ISSN 1471-4175

Lin, L-k (1994) Improving the productivity of roadway construction job sites with a portable expert system. PhD thesis, University of Utah, USA.

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Lisø, K R; Aandahl, G; Eriksen, S and Alfsen, K H (2003) Preparing for climate change impacts in norway's built environment. Building Research & Information, 31(3-4), pp. 200-209. ISSN 0961-3218

Lisø, K R; Hygen, H O; Kvande, T and Thue, J V (2006) Decay potential in wood structures using climate data. Building Research & Information, 34(6), pp. 546-551. ISSN 0961-3218

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Lisø, K R; Myhre, L; Kvande, T; Thue, J V and Nordvik, V (2007) A Norwegian perspective on buildings and climate change. Building Research & Information, 35(4), pp. 437-449. ISSN 0961-3218

Liu, J; Jiang, S; Sun, H; Liu, W and Xiao, B (2026) Quality inspection information extraction: Intelligent parsing of construction quality inspection specifications based on natural language processing. Journal of Construction Engineering and Management, 152(4): 04026027, ISSN 0733-9364

Liu, Y.; Schmidt, S.; Li, H. and Cao, Y. (2026) A study on the moisture risk assessment path for exterior wall of existing residential building in Shanghai based on hygrothermal simulation analysis. Architectural Engineering and Design Management, 22(2), pp. 340-364. ISSN 1745-2007

Liu, D; Sun, J; Zhong, D and Song, L (2012) Compaction quality control of earth-rock dam construction using real-time field operation data. Journal of Construction Engineering and Management, 138(9), pp. 1085-1094. ISSN 0733-9364

Liu, F; Chang-Richards, A; Wang, K I K and Dirks, K N (2023) Critical indoor environmental factors affecting productivity: Perspectives from university staff and postgraduate students. Building Research & Information, 51(6), pp. 730-745. ISSN 0961-3218

Liu, J; Li, W; Li, F and Zhao, X (2025) Chinese named entity recognition for bridge damage and defects based on text mining and natural language pretraining models. Journal of Construction Engineering and Management, 151(6): 04025060, ISSN 0733-9364

Liu, Jiani (2014) Developing a life cycle assessment model for measuring sustainable performance of buildings in China. PhD thesis, University of Technology Sydney, Australia.

Liu, K and El-Gohary, N (2022) Bridge deterioration knowledge ontology for supporting bridge document analytics. Journal of Construction Engineering and Management, 148(6): 04022030, ISSN 0733-9364

Liu, Lan (2020) Design guidance and development of construction stormwater technologies. PhD thesis, Auburn University, USA.

Liu, P (2024) Trustworthy civil infrastructure inspection through human-machine intelligence integration. PhD thesis, Carnegie Mellon University, USA.

Liu, Y; Yao, F; Ji, Y; Tong, W; Liu, G; Li, H X and Hu, X (2022) Quality control for offsite construction: Review and future directions. Journal of Construction Engineering and Management, 148(8): 03122003, ISSN 0733-9364

Liu, Yu Ming (2005) A holistic approach to developing generic vs. regionally specific frameworks for sustainable building tools. PhD thesis, University of New South Wales, Australia.

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

Loduca, D P (2011) Exploratory study of barriers to use of Feigenbaum's quality cost strategy within design engineering firms. PhD thesis, Missouri University of Science and Technology, USA.

Lokuge, W; Gamage, N and Setunge, S (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset Management, 6(3), pp. 332-344. ISSN 2044-124X

Lomas, K J; Cook, M J and Short, C A (2009) Commissioning hybrid advanced naturally ventilated buildings: A US case study. Building Research & Information, 37(4), pp. 397-412. ISSN 0961-3218

Love, P E D (2001) Determinants of rework in Australian construction projects. PhD thesis, Monash University, Australia.

Love, P E D; Edwards, D J and Smith, J (2016) Rework causation: Emergent theoretical insights and implications for research. Journal of Construction Engineering and Management, 142(6): 04016010, ISSN 0733-9364

Love, P E D; Leonard, D; Matthews, J; Ford, G and Fang, W (2024) Setting a course to validate and operationalize quality II in construction. Journal of Construction Engineering and Management, 150(12): 06024002, ISSN 0733-9364

Love, P E D and Li, H (2000) Overcoming the problems associated with quality certification. Construction Management and Economics, 18(2), pp. 139-149. ISSN 01446193

Love, P E D; Manual, P and Li, H (1999) Determining the causal structure of rework influences in construction. Construction Management and Economics, 17(4), pp. 505-517. ISSN 01446193

Love, P E D; Smith, J; Treloar, G J and Li, H (2000) Some empirical observations of service quality in construction. Engineering, Construction and Architectural Management, 7(2), pp. 191-201. ISSN 0969-9988

Love, P E D; Teo, P and Morrison, J (2018) Revisiting quality failure costs in construction. Journal of Construction Engineering and Management, 144(2): 05017020, ISSN 0733-9364

Low, S P (2012) Strategic development of the built environment through international construction, quality and productivity management. DSc thesis, University of Birmingham, UK.

Low, S P and Gao, S (2011) The application of the just-in-time philosophy in the Chinese construction industry. Journal of Construction in Developing Countries, 16(1), pp. 91-111. ISSN 1823-6499

Low, S P and Tan, W (1996) Public policies for managing construction quality: The grand strategy of Singapore. Construction Management and Economics, 14(4), pp. 295-309. ISSN 01446193

Lowe, R (2006) Defining absolute environmental limits for the built environment. Building Research & Information, 34(4), pp. 405-415. ISSN 0961-3218

Lowe, R; Chiu, L F and Oreszczyn, T (2018) Socio-technical case study method in building performance evaluation. Building Research & Information, 46(5), pp. 469-484. ISSN 0961-3218

Lu, H and Juan, Y K (2023) Applying the DQI-based kano model and QFD to develop design strategies for visitor centers in national parks. Architectural Engineering and Design Management, 19(3), pp. 215-232. ISSN 1745-2007

Lu, Na (2007) Investigation of designers' and general contractors' perceptions of offsite construction techniques in the United States construction industry. PhD thesis, Clemson University, USA.

Lumpkin, D (2022) Reimagining building efficacy: An exploratory study. PhD thesis, Purdue University, USA.

Lundkvist, R; Meiling, J and Vennström, A (2010) Digitalization of inspection data: A means for enhancing learning and continuous improvements? In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Lundkvist, R; Meiling, J H and Sandberg, M (2014) A proactive plan-do-check-act approach to defect management based on a Swedish construction project. Construction Management and Economics, 32(11), pp. 1051-1065. ISSN 01446193

Lyu, K Y (1989) Internationalisation of Korean industry: A study of the performance of the plant and construction industry. PhD thesis, University of Manchester, UK.

Lützkendorf, T and Lorenz, D (2005) Sustainable property investment: Valuing sustainable buildings through property performance assessment. Building Research & Information, 33(3), pp. 212-234. ISSN 0961-3218

Lützkendorf, T and Lorenz, D (2006) Using an integrated performance approach in building assessment tools. Building Research & Information, 34(4), pp. 334-356. ISSN 0961-3218

Lützkendorf, T and Speer, T M (2005) Alleviating asymmetric information in property markets: Building performance and product quality as signals for consumers. Building Research & Information, 33(2), pp. 182-195. ISSN 0961-3218

Ma, B; Cai, Y; Zhang, H; Fan, Y; Wang, F; Wang, P; Lyu, Z and Zhao, Z (2025) Evaluating construction risks of ultralarge diameter bored pile in deep water using combination weighting with two-dimensional cloud optimization. Journal of Construction Engineering and Management, 151(8): 05025007, ISSN 0733-9364

Ma, G; Wu, M; Jia, J and Yang, W (2021) Two-level quality decision support system for building structural damage prediction and maintenance solution recommendation in the operation and maintenance phase. Journal of Construction Engineering and Management, 147(6): 04021044, ISSN 0733-9364

Ma, S; Li, Z and Shen, Y (2025) Decision-making framework for selecting sustainable prefabricated residential building technology schemes under minimum assembly rate constraints. Journal of Construction Engineering and Management, 151(8): 04025100, ISSN 0733-9364

Ma, Y (2011) A semiotic framework for buildings performance assessment. PhD thesis, University of Reading, UK.

Mahalingam, A (2006) Understanding and mitigating institutional costs on global projects. PhD thesis, Stanford University, USA.

Mahamadu, A-M; Manu, P; Booth, C; Olomolaiye, P; Coker, A; Ibrahim, A and Lamond, J (2018) Infrastructure procurement skills gap amongst procurement personnel in Nigeria's public sector. Journal of Engineering, Design and Technology, 16(1), pp. 2-24.

Mahamedi, E; Wonders, M; Kassem, M; Woo, W L and Greenwood, D (2022) Digital twin and building performance: A review and proposed framework. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Mahamivanan, H; Ghassemi, N; Tayarani Darbandy, M; Shoeibi, A; Hussain, S; Nasirzadeh, F; Alizadehsani, R; Nahavandi, D; Khosravi, A and Nahavandi, S (2025) Material recognition for construction quality monitoring using deep learning methods. Construction Innovation, 25(3), pp. 732-760. ISSN 1471-4175

Makulsawatudom, A and Emsley, M (2001) Factors affecting the productivity of the construction industry in Thailand: The project managers' perception. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Mallon, J C and Mulligan, D E (1993) Quality function deployment: a system for meeting customers' needs. Journal of Construction Engineering and Management, 119(3), pp. 516-531. ISSN 0733-9364

Mansuri, L E and Patel, D A (2022) Artificial intelligence-based automatic visual inspection system for built heritage. Smart and Sustainable Built Environment, 11(3), pp. 622-646. ISSN 2046-6099

Manthe, M F and Smallwood, J J (2008) An overview of the appropriateness of tertiary built environment education in South Africa. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Marasini, R and Quinnell, P (2010) Investigation of quality management practices in building construction sites in the UK. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Marocco, M and Garofolo, I (2021) Operational text-mining methods for enhancing building maintenance management. Building Research & Information, 49(8), pp. 893-911. ISSN 0961-3218

Marteinsson, B (2003) Durability and the factor method of ISO 15686-1. Building Research & Information, 31(6), pp. 416-426. ISSN 0961-3218

Marzouk, M and Enaba, M (2019) Analyzing project data in BIM with descriptive analytics to improve project performance. Built Environment Project and Asset Management, 9(4), pp. 476-488. ISSN 2044-124X

Marzouk, M and Hassouna, M (2019) Quality analysis using three-dimensional modelling and image processing techniques. Construction Innovation, 19(4), pp. 614-628. ISSN 1471-4175

Masera, M (1999) An innovative planning technique in quality management. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Maslova, S and Burgess, G (2023) Delivering human-centred housing: Understanding the role of post-occupancy evaluation and customer feedback in traditional and innovative social housebuilding in England. Construction Management and Economics, 41(4), pp. 277-292. ISSN 01446193

Mason, J (1999) The impact of total quality management on construction worker safety. PhD thesis, University of South Florida, USA.

Masood, R; Roy, K; Gonzalez, V A and Lim, J B P (2024) Ameliorating supply chains of prefabricated housebuilding: An integrated performance framework. Journal of Construction Engineering and Management, 150(6): 04024044, ISSN 0733-9364

Matarneh, S; Elghaish, F; Al-Ghraibah, A; Abdellatef, E and Edwards, D J (2025) An automatic image processing based on hough transform algorithm for pavement crack detection and classification. Smart and Sustainable Built Environment, 14(1), pp. 1-22. ISSN 2046-6099

Matos, R; Rodrigues, H; Costa, A; Requejo, C and Rodrigues, F (2023) Facility manager perspectives on building condition assessment for Portuguese higher education institutions. Building Research & Information, 51(8), pp. 949-964. ISSN 0961-3218

Maver, T W (2020) The architectural and engineering design of buildings aided by computer: A personal memoir with selected publications. DSc thesis, University of Glasgow, UK.

Mayouf, M.; Kay, K. and Ashayeri, I. (2026) Building performance in refurbishment projects: A hybrid framework for holistic performance delivery. International Journal of Building Pathology and Adaptation, 44(4), pp. 1121-1137. ISSN 2398-4708

Mayouf, M A A (2016) Improving the delivery of building performance using building information modelling (BIM). PhD thesis, Birmingham City University, UK.

Mazari, M (2014) Studying the parameters involved with modulus-based construction quality control for compaction of unbound pavement layers. PhD thesis, University of Texas at El Paso, USA.

McCabe, B; AbouRizk, S and Gavin, J (2002) Time of sampling strategies for asphalt pavement quality assurance. Journal of Construction Engineering and Management, 128(1), pp. 85-89. ISSN 0733-9364

McCabe, S (1997) Using suitable tools for researching what quality managers in construction organizations actually do. Journal of Construction Procurement, 3(2), pp. 72-87. ISSN 1358-9180

McCabe, S and Boyd, D (2004) Quality management 25 years on: What can we learn about initiatives in construction? In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

McCabe, S; Crook, D; Rooke, J and Seymour, D (1997) Construction's experiences of attempting to become world class: The role of academics in assisting practitioners. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

McCabe, S and Robertson, H (2000) Striving to be the best: A case study of construction benchmarking world class organizations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

McCabe, S; Rooke, J; Seymour, D and Brown, P (1998) Quality managers, authority and leadership. Construction Management and Economics, 16(4), pp. 447-457. ISSN 01446193

McElroy, D J and Rosenow, J (2019) Policy implications for the performance gap of low-carbon building technologies. Building Research & Information, 47(5), pp. 611-623. ISSN 0961-3218

McElroy, L B (2009) Embedding integrated building performance assessment in design practice. PhD thesis, University of Strathclyde, UK.

McGill, G; Sharpe, T; Robertson, L; Gupta, R and Mawditt, I (2017) Meta-analysis of indoor temperatures in new-build housing. Building Research & Information, 45(1-2), pp. 19-39. ISSN 0961-3218

McLellan, R (1994) The use of project management procedures by construction contractors. PhD thesis, University of Strathclyde, UK.

McNamara, E T; Howarth, T A P; Hill, C J and Stoneman, G R W (1998) Quality issues in marketing construction related products and services in China. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

McWilliam, R C (2002) The evolution of British standards. PhD thesis, University of Reading, UK.

Meacham, B J (2010) Accommodating innovation in building regulation: Lessons and challenges. Building Research & Information, 38(6), pp. 686-698. ISSN 0961-3218

Meacham, B J (2022) Fire performance and regulatory considerations with modern methods of construction. Buildings & Cities, 3(1), pp. 464-487. ISSN 2632-6655

Mecca, S (1999) A model of construction planning procedure according to contingency theory. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Mecca, S and Masera, M (1999) Technical risk analysis in construction by means of fmea methodology. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Meeampol, S and Ogunlan, S O (2006) Factors affecting cost and time performance on highway construction projects: Evidence from Thailand. Journal of Financial Management of Property and Construction, 11(1), pp. 3-20. ISSN 1366-4387

Mega, T (2008) Implications of quality management in the Greek construction industry. PhD thesis, University College London, UK.

Mehrvarz, Nassim (2025) Optimising sustainability in building design from a life cycle perspective. PhD thesis, University of New South Wales, Australia.

Mei, X; Zhou, X; Xu, F and Zhang, Z (2023) Human intrusion detection in static hazardous areas at construction sites: Deep learning-based method. Journal of Construction Engineering and Management, 149(1): 04022142, ISSN 0733-9364

Meijer, F and Visscher, H (2017) Quality control of constructions: European trends and developments. International Journal of Law in the Built Environment, 9(2), pp. 143-161. ISSN 1756-1450

Meiling, J (2010) Continuous improvement and experience feedback in off-site construction timber-framed module prefabrication. PhD thesis, Luleå University of Technology, Sweden.

Meiling, J and Johnsson, H (2008) Feedback in industrialised housing: Why does it not happen? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Meiling, J H; Sandberg, M and Johnsson, H (2014) A study of a plan-do-check-act method used in less industrialized activities: Two cases from industrialized housebuilding. Construction Management and Economics, 32(1-2), pp. 109-125. ISSN 01446193

Mekid, S and Bashmal, S (2019) Engineering manipulation at nanoscale: Further functional specifications. Journal of Engineering, Design and Technology, 17(3), pp. 572-590. ISSN 1726-0531

Melete, Refiloe (2024) An analysis of the effectiveness of the infrastructure delivery management system in the South African government. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Merdinger, C J (1949) A history of civil engineering. PhD thesis, University of Oxford, UK.

Migliaccio, G C; Bogus, S M and Cordova-Alvidrez, A A (2014) Continuous quality improvement techniques for data collection in asset management systems. Journal of Construction Engineering and Management, 140(4): B4013008, ISSN 0733-9364

Milberg, C T (2006) Application of tolerance management to civil systems. PhD thesis, University of California, Berkeley, USA.

Mills, Anthony John (2002) Client and contractor attitudes to prequalification and selection processes for construction work. PhD thesis, University of Melbourne, Australia.

Mills, G R W; Phiri, M; Erskine, J and Price, A D F (2015) Rethinking healthcare building design quality: An evidence-based strategy. Building Research & Information, 43(4), pp. 499-515. ISSN 0961-3218

Minchin, R E; Cui, S; Walters, R C; Issa, R and Pan, J (2013) Sino-American opinions and perceptions of counterfeiting in the construction supply chain. Journal of Construction Engineering and Management, 139(1), pp. 1-8. ISSN 0733-9364

Minchin, R E; Hammons, M I and Ahn, J (2008) A construction quality index for highway construction. Construction Management and Economics, 26(12), pp. 1313-1324. ISSN 1466433X

Minchin Jr, R E; Henriquez, N R; King, A M and Lewis, D W (2010) Owners respond: Preferences for task performance, delivery systems, and quality management. Journal of Construction Engineering and Management, 136(3), pp. 283-293. ISSN 0733-9364

Mincks, W R (2016) Career success for construction project managers: A qualitative study of construction project managers coping with stress to complete successful projects. PhD thesis, University of Idaho, USA.

Mirzabeigi, S (2024) Integrated building envelope assessment towards automation of energy retrofits: Drone-based data acquisition, automated thermal anomaly detection, and workflow development. PhD thesis, State University of New York College of Environmental Science and Forestry, USA.

Mlecnik, E (2013) Improving passive house certification: Recommendations based on end-user experiences. Architectural Engineering and Design Management, 9(4), pp. 250-264. ISSN 1745-2007

Mlecnik, E (2013) Innovation development for highly energy-efficient housing: Opportunities and challenges related to the adoption of passive houses. PhD thesis, Delft University of Technology, Netherlands.

Moatazed-Keivani, R; Ghanbari-Parsa, A R and Kagaya, S (1999) ISO 9000 standards: Perceptions and experiences in the UK construction industry. Construction Management and Economics, 17(1), pp. 107-119. ISSN 01446193

Mock, B and O'Connor, J (2022) Taxonomic categories for commissioning and startup hot spot strategies. Construction Innovation, 22(1), pp. 120-140. ISSN 1471-4175

Moezzi, M and Goins, J (2011) Text mining for occupant perspectives on the physical workplace. Building Research & Information, 39(2), pp. 169-182. ISSN 0961-3218

Mogollon, J D M (2009) Automation of design and drafting for wood frame structures and construction waste minimization. PhD thesis, University of Alberta, Canada.

Mohagheghi-Fard, M N (2019) An online collaboration framework for small and medium sized enterprises in the United Kingdom construction sector. PhD thesis, University of Salford, UK.

Mohamad, M and Tran, D Q (2021) Risk-based prioritization approach to construction inspections for transportation projects. Journal of Construction Engineering and Management, 147(1): 04020150, ISSN 0733-9364

Mohamad Kamar, K A (2011) Critical success factors to industrialised building system contractor. PhD thesis, University of Salford, UK.

Mohamed, M (2022) A risk-based model for construction inspection in highways. PhD thesis, University of Kansas, USA.

Mohamed, M and Tran, D Q (2021) Risk-based inspection model for hot mix asphalt pavement construction projects. Journal of Construction Engineering and Management, 147(6): 78622053, ISSN 0733-9364

Mohamed, M and Tran, D Q (2023) Content analysis of e-inspection implementation for highway infrastructure construction projects. Engineering, Construction and Architectural Management, 30(7), pp. 2621-2644. ISSN 0969-9988

Mohamed, T and Karima, A (2018) Architectural quality through the integration of users' viewpoints in architectural design: Case study Pouillon's Diar es Saada. Journal of Construction in Developing Countries, 23(1), pp. 149-175. ISSN 1823-6499

Mohammadi, Masoud (2023) Development of bridge information model (brim) for digital twinning and management using tls technology. PhD thesis, Western Sydney University, Australia.

Mohammadi, P; Asgari, S; Rashidi, A and Alder, R (2025) Culvert inspection framework using hybrid xgboost and risk-based prioritization: Utah case study. Journal of Construction Engineering and Management, 151(6): 04025052, ISSN 0733-9364

Mohammadrezaytayebi, S; Sebt, M H and Afshar, M R (2023) Introducing a system dynamic–based model of quality estimation for construction industry subcontractors' works. International Journal of Construction Management, 23(4), pp. 586-595. ISSN 1562-3599

Mohammed Abdelkader, E (2022) On the hybridization of pre-trained deep learning and differential evolution algorithms for semantic crack detection and recognition in ensemble of infrastructures. Smart and Sustainable Built Environment, 11(3), pp. 740-764. ISSN 2046-6099

Mohseni, H; Setunge, S; Zhang, G and Wakefield, R (2017) Markov process for deterioration modeling and asset management of community buildings. Journal of Construction Engineering and Management, 143(6): 04017003, ISSN 0733-9364

Moir, S and Carter, K (2012) Diagrammatic representations of sustainability: A review and synthesis. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Mokhtar Azizi, N S; Wilkinson, S and Fassman, E (2014) Management practice to achieve energy-efficient performance of green buildings in New Zealand. Architectural Engineering and Design Management, 10(1-2), pp. 25-39. ISSN 1745-2007

Moon, S; Zekavat, P R and Bernold, L E (2017) Dynamic quality control of process resource to improve concrete supply chain. Journal of Construction Engineering and Management, 143(5): 04016130, ISSN 0733-9364

Moon, Sungkon (2014) Dynamic control of supply chain quality to improve process performance in construction. PhD thesis, University of New South Wales, Australia.

Moore, T; Ridley, I; Strengers, Y; Maller, C and Horne, R (2017) Dwelling performance and adaptive summer comfort in low-income Australian households. Building Research & Information, 45(4), pp. 443-456. ISSN 0961-3218

Mora, R (2005) Representation and reasoning for integrated conceptual design of building structures. PhD thesis, Concordia University, Canada.

Morcous, G S L (2000) Case -based reasoning for modeling bridge deterioration. PhD thesis, Concordia University, Canada.

Moreno-Alba, D; Marmolejo-Duarte, C; Vicuña Del Río, M and Aguirre-Núñez, C (2026) Urban verticalisation: Typologies of high-rise development in santiago. Buildings & Cities, 7(1), pp. 254-272. ISSN 2632-6655

Morgado, J; Flores-Colen, I; De Brito, J and Silva, A (2017) Maintenance planning of pitched roofs in current buildings. Journal of Construction Engineering and Management, 143(7): 05017010, ISSN 0733-9364

Morgan, G. T.; Touchie, M. F.; Robinson, J.; Jakubiec, A. and Tran, J. (2026) Critical reflections on the process of interdisciplinary building science research. Buildings & Cities, 7(1), pp. 653-666. ISSN 2632-6655

Morgan, C; Foster, J A; Poston, A and Sharpe, T R (2017) Overheating in Scotland: Contributing factors in occupied homes. Building Research & Information, 45(1-2), pp. 143-156. ISSN 0961-3218

Morland, K V (2020) Multi-level learning of a quality management routine: a UK housebuilder case study. PhD thesis, University of Sheffield, UK.

Morland, K V and Breslin, D (2024) Resolving learning paradoxes within a UK new-build housebuilder. Construction Management and Economics, 42(4), pp. 307-327. ISSN 01446193

Morrissey, D; Goodier, C and Demian, P (2024) Offsite construction in ireland’s hospitals: Unveiling the complexities of OSC adoption. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Morsi, D M A; Ismaeel, W S E; El Hamed, A E A and Othman, A A E (2020) Applying LCA-BIM integration for a sustainable management process. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Mostafa, K and Hegazy, T (2025) Smart rehabilitation-planning framework for sustainable infrastructure: Roofing application. Journal of Construction Engineering and Management, 151(2): 04024203, ISSN 0733-9364

Mostafa Adel, E; Elnawawy, O; Ayman Ahmed Ezzat, O and Badawy, M (2021) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Mostafavi, A; Abraham, D; Noureldin, S; Pankow, G; Novak, J; Walker, R; Hall, K and George, B (2013) Risk-based protocol for inspection of transportation construction projects undertaken by state departments of transportation. Journal of Construction Engineering and Management, 139(8), pp. 977-986. ISSN 0733-9364

Mostofi, F; Tokdemir, O B and Toǧan, V (2023) Comprehensive root cause analysis of construction defects using semisupervised graph representation learning. Journal of Construction Engineering and Management, 149(9): 04023079, ISSN 0733-9364

Motawa, I A; Price, A D F and Sher, W (1998) The introduction and management of innovative construction processes and products. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Moussa, M (2022) Truck tolling for bridges in USA: A new approach for determining a fair toll policy. PhD thesis, New York University Tandon School of Engineering, USA.

Moyo, T and Chigara, B (2023) Barriers to lean construction implementation in Zimbabwe. Journal of Engineering, Design and Technology, 21(3), pp. 733-757. ISSN 1726-0531

Mukwanason, D E; Tutesigensi, A; Kayondo, M and Mutikanga, H E (2023) Impact of project quality culture on defects in infrastructure projects. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Mulenga, C Z (2020) Construction project performance in Zambia: A case study of public high schools. PhD thesis, University of Bolton, UK.

Murtagh, N; Owen, A M and Simpson, K (2023) Engaging UK repair–maintain–improve practitioners in improved building performance. International Journal of Building Pathology and Adaptation, 41(1), pp. 11-24. ISSN 23984708

Mushtaha, E; Alsyouf, I; Hamad, R; Elmualim, A; Maksoud, A and Yahia, M W (2022) Developing design guidelines for university campus in hot climate using quality function deployment (QFD): The case of the University of sharjah, UAE. Architectural Engineering and Design Management, 18(5), pp. 593-613. ISSN 1745-2007

Myers, H; Wade, F and Webb, J (2019) Mapping emerging subcontracting networks for the energy efficiency retrofit of hard-to-treat buildings. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Nackasha, Lway Adel Bitris (1990) A system approach to the development of quality management in construction. PhD thesis, Queen's University Belfast, UK.

Nadim, W (2009) Industrialising the construction industry: a collaborative training and education model. PhD thesis, University of Salford, UK.

Nahod, M M and Radujkovi, M (2011) Procedures for change management in the realization phase of construction projects. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Naja, M and Baytiyeh, H (2015) Stopping the tragedy before it occurs protecting lebanese public schools from upcoming earthquake disasters. International Journal of Disaster Resilience in the Built Environment, 6(2), pp. 182-192. ISSN 1759-5916

Naji, K K; Gunduz, M and Naser, A F (2022) The effect of change-order management factors on construction project success: A structural equation modeling approach. Journal of Construction Engineering and Management, 148(9): 04022085, ISSN 0733-9364

Nakhi, A E (1995) Adaptive construction modelling within whole building dynamic simulation. PhD thesis, University of Strathclyde, UK.

Naoum, S G and Mustapha, F H (1995) Relationship between the building team, procurement methods and project performance. Journal of Construction Procurement, 1(1), pp. 50-63. ISSN 1358-9180

Navab-Kashani, R; Gay, L F and Bayat, A (2015) Productivity improvement of sewer CCTV inspection through time study and route optimization. Journal of Construction Engineering and Management, 141(6): 04015009, ISSN 0733-9364

Naveed, F and Khan, K I A (2022) Investigating the influence of information complexity on construction quality: A systems thinking approach. Engineering, Construction and Architectural Management, 29(3), pp. 1427-1448. ISSN 0969-9988

Nazeer, S F and De Silva, N (2016) Tbpe scoring framework for tropical buildings. Built Environment Project and Asset Management, 6(2), pp. 174-186. ISSN 2044-124X

Nelson, T N T (2024) Using socio-technical water systems in construction engineering to address water insecurity after hurricanes maria and fiona. PhD thesis, Iowa State University, USA.

Nemati, M A and Rastaghi, Z (2024) Quality assessment of on-campus student housing facilities through a holistic post-occupancy evaluation (A case study of Iran). Architectural Engineering and Design Management, 20(4), pp. 719-740. ISSN 1745-2007

Ness, K (2010) 'I know Brendan; he’s a good lad': The evaluation of skill in the recruitment and selection of construction workers. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Neuman, Y; Alves, T D C L; Walsh, K D and Needy, K L (2015) Quantitative analysis of supplier quality surveillance practices in EPC projects. Journal of Construction Engineering and Management, 141(11): 04015039, ISSN 0733-9364

Newsham, G R; Birt, B J; Arsenault, C; Thompson, A J L; Veitch, J A; Mancini, S; Galasiu, A D; Gover, B N; MacDonald, I A and Burns, G J (2013) Do green buildings have better indoor environments? New evidence. Building Research & Information, 41(4), pp. 415-434. ISSN 0961-3218

Newton, L A (2004) The impact of quality on building life cycle costs. PhD thesis, University of New Brunswick, Canada.

Ng, H S M N (2006) Dynamic decision support for contingency management and allocation for construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Ng, S T and Li, W (2004) A multiagent system for negotiating construction bidding decisions. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Ng, S T and Wong, Y M W (2006) Adopting non-privately funded public-private partnerships in maintenance projects: A case study in Hong Kong. Engineering, Construction and Architectural Management, 13(2), pp. 186-200. ISSN 0969-9988

Nghitanwa, E M (2016) Development of practical guidelines to promote occupational health and safety for workers in the construction industry in Windhoek, Namibia. DLittPhil thesis, University of South Africa, South Africa.

Ngoc-Thoan, N; Bui, D Q T; Tran, C N N and Tran, D H (2024) Improved detection network model based on yolov5 for warning safety in construction sites. International Journal of Construction Management, 24(9), pp. 1007-1017. ISSN 1562-3599

Nguyen, T D H N; Park, S; Jeong, J and Ahn, Y (2026) Post occupancy evaluation of the relocatable modular construction method for temporary educational facilities. Engineering, Construction and Architectural Management, 33(1), pp. 785-809. ISSN 0969-9988

Nguyen, D C; Nguyen, T Q; Jin, R; Jeon, C H and Shim, C S (2022) BIM-based mixed-reality application for bridge inspection and maintenance. Construction Innovation, 22(3), pp. 487-503. ISSN 1471-4175

Nguyen, P H D and Tran, D (2024) Exploring the use of quality control plans for alternative contracting methods in highway projects. Journal of Construction Engineering and Management, 150(5): 04024030, ISSN 0733-9364

Nguyen, Q A (2023) Application of Ji Koutei Kanketsu (JKK) for design risk management in highway construction projects. PhD thesis, University of Huddersfield, UK.

Nguyen, T H; Berstein, S; McIntyre, C and Smith, G R (2008) Customer service management practices in the homebuilding industry. International Journal of Construction Education and Research, 4(1), pp. 3-17. ISSN 1557-8771

Nielsen, K J (2017) A comparison of inspection practices within the construction industry between the Danish and Swedish work environment authorities. Construction Management and Economics, 35(3), pp. 154-169. ISSN 01446193

Nielsen, Y and Erdogan, B (2004) Information visualisation in construction industry; a quality perspective. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Noganta, A (2019) Key challenges faced by main contractors in coordinating the works of their subcontractors: A case study of kusile power station project. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Noghabaei, M (2021) Visual and behavioral data analysis in immersive virtual environments for enhancing construction safety, planning, and control. PhD thesis, North Carolina State University, USA.

Nordwall, U and Olofsson, T (2013) Architectural caring. Architectural qualities from a residential property perspective. Architectural Engineering and Design Management, 9(1), pp. 1-20. ISSN 1745-2007

Nouh, A; Elkasaby, E and Hussein, K (2023) Establishment of prediction system for cost of defect liability phase in construction project. Construction Innovation, 23(2), pp. 467-486. ISSN 1471-4175

Nwadike, A N and Wilkinson, S (2022) An evidence-based framework validation for building code improvement in New Zealand. Engineering, Construction and Architectural Management, 29(8), pp. 3072-3090. ISSN 0969-9988

Nwadike, A N and Wilkinson, S (2022) Why amending building codes? An investigation of the benefits of regular building code amendment in New Zealand. International Journal of Building Pathology and Adaptation, 40(1), pp. 76-100. ISSN 23984708

Nyakala, K S (2017) Developing a road construction quality assurance process measurement tool: The case of Mopani district municipality. DPhil thesis, University of Johannesburg, South Africa.

Nyakala, S; Pretorius, J and Vermeulen, A (2020) Construction quality process implementation as a source of competitive advantage in small and medium-sized construction projects. Journal of Construction Business and Management, 4(2), pp. 46-54. ISSN 2521-0165

Nyalungu, Jey; Mbona, Sizwe; Ogunsola, Sijuwade and Sibuyi, Venus (2026) The effectiveness of supply chain management in enhancing project management outcomes. Journal of Construction Business and Management, 8(2), pp. 54-64. ISSN 2521-0165

O'Sullivan, D T J (2005) Improving building performance by tracking performance metrics using an IFC data model. PhD thesis, University College Cork, Ireland.

Obunwo, C; Chinyio, E and Suresh, S (2015) Relative contributions of project quality to customer satisfaction in Nigerian road construction projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Odiba, E (2018) A model for effective quality management practices in construction organisations: The case of Nigeria. PhD thesis, Loughborough University, UK.

Odiba, E; Demian, P and Ruikar, K (2021) Development of a conceptual framework for effective quality management practices in construction organisations. Journal of Construction Business and Management, 5(1), pp. 1-16. ISSN 2521-0165

Oechler, E; Molenaar, K R; Hallowell, M and Scott, S (2018) State-of-practice for risk-based quality assurance in state departments of transportation. Engineering, Construction and Architectural Management, 25(7), pp. 958-970. ISSN 0969-9988

Ofori, G and Gang, G U (2001) ISO 9000 certification of Singapore construction enterprises: Its costs and benefits and its role in the development of the industry. Engineering, Construction and Architectural Management, 8(2), pp. 145-157. ISSN 0969-9988

Ogbeifun, E; Mbohwa, C and Pretorius, J H C (2018) Developing an effective renovation plan: The influence of data collection tools. International Journal of Building Pathology and Adaptation, 36(1), pp. 63-76. ISSN 23984708

Ogunbiyi, O; Goulding, J S and Oladapo, A (2014) An empirical study of the impact of lean construction techniques on sustainable construction in the UK. Construction Innovation, 14(1), pp. 88-107. ISSN 1471-4175

Ogunrinde, O (2020) Enhancing quality management in highway construction using emerging methods. PhD thesis, University of Alabama, USA.

Ojghaz, A S and Heravi, G (2026) An integrated BIM-GIS framework for building quality assessment based on price estimation: Evaluating design and location factors. Journal of Construction Engineering and Management, 152(4): 04026020, ISSN 0733-9364

Oke, A. E.; Aliu, J. O.; Timothy Jesudaju, O.; Thomas Fagbe, A.; Aghimien, D. and Aigbavboa, C. O. (2025) Building a sustainable future: The role of digitalization in Nigerian heavy engineering projects. Engineering, Construction and Architectural Management, 33(5), pp. 3957-3974. ISSN 0969-9988

Okehielem, N (2011) A benchmark for impact assessment of affordable housing. PhD thesis, University of Wolverhampton, UK.

Olanrewaju, A; Tan, Y Y and Soh, S N (2022) Defect characterisations in the Malaysian affordable housing. International Journal of Building Pathology and Adaptation, 40(4), pp. 539-568. ISSN 23984708

Olanrewaju, A A L (2012) Quantitative analysis of defects in university buildings: User perspective. Built Environment Project and Asset Management, 2(2), pp. 167-181. ISSN 2044-124X

Oliveira, Iberê Pinheiro de (2023) Criteria for building certification and assessment: An integrated approach to degradation and performance. PhD thesis, Universidade de Brasília, Brazil.

Oliveira, L; Retik, A and Watson, I (1997) Intelligent training using past experiences in virtual reality: An application for scaffold inspection. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Oliveira, L A and Melhado, S B (2011) Conceptual model for the integrated design of building façades. Architectural Engineering and Design Management, 7(3), pp. 190-204. ISSN 1745-2007

Oliveira, Nylvandir Liberato Fernandes de (2018) Risk analysis in civil construction projects in Brazil: A measurement method. PhD thesis, Universidade Federal Fluminense, Brazil.

Oliveira, S; Marco, E and Gething, B (2018) Towards an energy 'literate' architecture graduate? UK educators' and students' evaluation. Architectural Engineering and Design Management, 14(4), pp. 317-329. ISSN 1745-2007

Oliveira, S; Marco, E; Gething, B and Organ, S (2017) Evolutionary, not revolutionary: logics of early design energy modelling adoption in UK architecture practice. Architectural Engineering and Design Management, 13(3), pp. 168-184. ISSN 1745-2007

Omollo, W O (2019) Barriers to the effective regulation of the building construction industry: An empirical analysis. Journal of Construction Business and Management, 3(2), pp. 49-58. ISSN 2521-0165

Ong, H Y; Wang, C and Zainon, N (2018) Developing a quality-embedded EVM tool to facilitate the iron triangle in architectural, construction, and engineering practices. Journal of Construction Engineering and Management, 144(9): 04018079, ISSN 0733-9364

Oral, E L and Mstkolu, G (2000) Current state of Turkish prefabrication companies with respect to the applicability of just in time. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Ornstein, S W and Ono, R (2010) Post-occupancy evaluation and design quality in Brazil: Concepts, approaches and an example of application. Architectural Engineering and Design Management, 6(1), pp. 48-67. ISSN 1745-2007

Orvik, C. P. and Albrechtsen, E. (2026) The mismatch between conceptualization and measurements of safety performance: Insights from a qualitative study of the Norwegian construction industry. Construction Management and Economics, 44(5), pp. 319-336. ISSN 0144-6193

Osman, I I (2002) Performance measures for contracting companies: a study of the Arab Contractors Company. PhD thesis, Loughborough University, UK.

Osterberg, R (2003) Contracting out public services: An evaluation of the public consequences of opening up routine road maintenance to competition. PhD thesis, Kungliga Tekniska Hogskolan, Sweden.

Oswald, T H (1995) A model for using quality function deployment in engineering project development. PhD thesis, Clemson University, USA.

Othman, A A E (2004) Value and risk management for dynamic brief development in construction. PhD thesis, Loughborough University, UK.

Othman, A A E (2007) Generating sustainable values and achieving client satisfaction in construction projects through maintenance management: The case of housing projects in abu dhabi, united arab emirates. Architectural Engineering and Design Management, 3(3), pp. 145-159. ISSN 1745-2007

Othman, A A E and Alamoudy, F O (2021) Optimising building performance through integrating risk management and building information modelling during the design process. Journal of Engineering, Design and Technology, 19(6), pp. 1233-1267. ISSN 1726-0531

Othman, A A E and Elsaay, H (2018) A learning-based framework adopting post occupancy evaluation for improving the performance of architectural design firms. Journal of Engineering, Design and Technology, 16(3), pp. 418-438. ISSN 1726-0531

Owoyemi, J A (2018) Performance evaluation of higway transportation design-build project delivery: A case study. PhD thesis, University of Maryland, College Park, USA.

Oyedele, L O; Wai Tham, K; Jaiyeoba, B E and Fadeyi, M O (2003) Model for predicting architect's performance in building delivery process. Journal of Engineering, Design and Technology, 1(2), pp. 168-186. ISSN 1726-0531

Ozkan, A; Kesik, T; Yilmaz, A Z and O’Brien, W (2019) Development and visualization of time-based building energy performance metrics. Building Research & Information, 47(5), pp. 493-517. ISSN 0961-3218

Pahwa, J S (2009) MDSSF: a federated architecture for product procurement. PhD thesis, Cardiff University, UK.

Paik, S.; Chung, D.; Kim, Y.; Kim, J. and Kim, H. (2026) Autonomous UAV navigation for close-range image acquisition of scaffold joints. Journal of Construction Engineering and Management, 152(7): 04026081, ISSN 0733-9364

Paik, S.; Kim, J.; Lian, Y.; Kim, J. and Kim, H. (2026) Safety analysis of scaffold joints through image generation from point cloud data. Journal of Construction Engineering and Management, 152(8): 04026121, ISSN 0733-9364

Paiva, A G C (1996) A framework for the evaluation of quality of dwellings. PhD thesis, University of Bristol, UK.

Palmer, K (2012) Local authority liability in New Zealand for defective homes. International Journal of Law in the Built Environment, 4(3), pp. 203-216. ISSN 17561469

Pan, H; Huang, H; Luo, Z; Wu, C and Yang, S (2025) Research on safety risk factors of metro shield tunnel construction in China based on social network analysis. Engineering, Construction and Architectural Management, 32(12), pp. 8114-8144. ISSN 0969-9988

Pan, N F (2006) Evaluation of building performance using fuzzy FTA. Construction Management and Economics, 24(12), pp. 1241-1252. ISSN 1466433X

Pan, W; Chen, L and Zhan, W (2021) Positioning construction workers' vocational training of guangdong in the global political-economic spectrum of skill formation. Engineering, Construction and Architectural Management, 28(9), pp. 2489-2515. ISSN 0969-9988

Panayamkandi, R (2007) Development of a design process map for improving the efficiency of small and medium sized building consulting practices. PhD thesis, Heriot-Watt University, UK.

Panella, Fabio (2023) Automating inspection of tunnels with photogrammetry and deep learning. PhD thesis, University College London, UK.

Papachristos, G; Jain, N; Burman, E; Zimmermann, N; Wu, X; Liu, P; Mumovic, D; Lin, B; Davies, M and Edkins, A (2020) Low carbon building performance in the construction industry: A multi-method approach of system dynamics and building performance modelling. Construction Management and Economics, 38(9), pp. 856-876. ISSN 01446193

Papamichael, K (1999) Application of information technologies in building design decisions. Building Research & Information, 27(1), pp. 20-34. ISSN 0961-3218

Papamichael, K (2000) Green building performance prediction/assessment. Building Research & Information, 28(5-6), pp. 394-402. ISSN 0961-3218

Parkin, A; Herrera, M and Coley, D A (2020) Net-zero buildings: When carbon and energy metrics diverge. Buildings & Cities, 1(1), pp. 86-99. ISSN 2632-6655

Parkinson, A T; Reid, R; McKerrow, H and Wright, D (2018) Evaluating positivist theories of occupant satisfaction: A statistical analysis. Building Research & Information, 46(4), pp. 430-443. ISSN 0961-3218

Parmar, D; Kashiwagi, D and Savicky, J (2003) Case study of the dallas independent school district’s construction value. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Pasquire, C; Pennanen, A; Ballard, G and Haahtela, Y (2011) Target costing and designing to targets in construction. Journal of Financial Management of Property and Construction, 16(1), pp. 52-63. ISSN 1366-4387

Passe, U (2020) A design workflow for integrating performance into architectural education. Buildings & Cities, 1(1), pp. 565-578. ISSN 2632-6655

Patel, A J (1996) Development of fatigue based pay adjustment factors in performance-related specifications for full-depth asphalt concrete pavements. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Patel, H and Green, S D (2020) Beyond the performance gap: Reclaiming building appraisal through archival research. Building Research & Information, 48(5), pp. 469-484. ISSN 0961-3218

Patka, M A; Bugalia, N and Mahalingam, A (2025) Effectiveness of virtual reality in construction quality training: Comparative study. Journal of Construction Engineering and Management, 151(10): 04025145, ISSN 0733-9364

Patterson, D A; Farnsworth, C B; Hutchings, D M; Eggett, D L and Weidman, J E (2023) Comparing cost, schedule, and quality of CM/GC and DBB project delivery for repetitive commercial construction. International Journal of Construction Education and Research, 19(2), pp. 166-186. ISSN 1557-8771

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Paul, C A; Aghimien, D O; Ibrahim, A D and Ibrahim, Y M (2021) Measures for curbing unethical practices among construction industry professionals: Quantity surveyors' perspective. Construction Economics and Building, 21(2), pp. 1-17. ISSN 2204-9029

Paul, V K and Seth, V (2017) Benchmarking and objective selection of technologies for housing in India using quality function deployment. Journal of Construction in Developing Countries, 22(S1), pp. 63-78. ISSN 1823-6499

Peacock, W S (1990) Site investigation procedures and risk analysis. PhD thesis, University of Manchester, UK.

Pelsmakers, S; Vereecken, E; Airaksinen, M and Elwell, C C A (2019) Void conditions and potential for mould growth in insulated and uninsulated suspended timber ground floors. International Journal of Building Pathology and Adaptation, 37(4), pp. 395-425. ISSN 23984708

Penland, J L (2002) Implementation of web-based team collaboration tools in the architectural, engineering and construction industry. PhD thesis, University of Kansas, USA.

Pereira, Ana Paula Carvalho (2017) Building information modeling in the project phase: A proposal for a BIM execution plan for SUMAI / UFBA. PhD thesis, Universidade Federal da Bahia, Brazil.

Perera, Weebadda Arachchilage Salinda (2018) An investigation into developing productive construction environments to improve quality performance in Australian building construction. PhD thesis, University of New South Wales, Australia.

Persson, M H (2006) Lessons learned in knowledge management: The case of construction. PhD thesis, Lund University, Sweden.

Petcherdchoo, A (2004) Maintaining condition and safety of deteriorating bridges by probabilistic models and optimization. PhD thesis, University of Colorado at Boulder, USA.

Petrova, E (2019) AI for BIM-based sustainable building design: Integrating knowledge discovery and semantic data modelling for evidence-based design decision support. PhD thesis, Aalborg University, Denmark.

Pheng, L S (1993) The rationalization of quality in the construction industry: Some empirical findings. Construction Management and Economics, 11(4), pp. 247-259. ISSN 01446193

Pheng, L S and Hou, C W (2008) Middle management's influence on the effectiveness of ISO 9000 quality management systems in architectural firms. Architectural Engineering and Design Management, 4(3-4), pp. 189-205. ISSN 1745-2007

Pheng, L S and Pong, C Y (2003) Integrating ISO 9001 and ohsas 18001 for construction. Journal of Construction Engineering and Management, 129(3), pp. 338-347. ISSN 0733-9364

Pheng, L S and Tan, J H K (2005) Integrating ISO 9001 quality management system and ISO 14001 environmental management system for contractors. Journal of Construction Engineering and Management, 131(11), pp. 1241-1244. ISSN 0733-9364

Pheng, L S and Tan, S K L (1997) The measurement of just in time wastage for a public housing project in Singapore. Building Research & Information, 25(2), pp. 67-81. ISSN 0961-3218

Pieterse, B; Agyekum, K; Manu, P; Mohandes, S R; Cheung, C and Yunusa-Kaltungo, A (2024) Examining critical project management skills for successful delivery of major maintenance projects: Insights from the United Kingdom energy sector. Engineering, Construction and Architectural Management, 31(4), pp. 1556-1584. ISSN 0969-9988

Pilgrim, M; Bouchlaghem, D; Loveday, D and Holmes, M (2002) Towards best practice in building analysis data representation. Construction Innovation, 2(2), pp. 117-130. ISSN 1471-4175

Pilgrim, M J (2003) The application of visualisation techniques to the process of building performance analysis. PhD thesis, Loughborough University, UK.

Pinto Nunez, M D C (2017) Comprehensive partnering management model for highway construction projects delivered using traditional and alternative methods. PhD thesis, Iowa State University, USA.

Piroozfar, P; Altan, H and Popovic-Larsen, O (2012) Design for sustainability: A comparative study of a customized modern method of construction versus conventional methods of construction. Architectural Engineering and Design Management, 8(1), pp. 55-75. ISSN 1745-2007

Poirier, E; Staub-French, S; Pilon, A; Fallahi, A; Teshnizi, Z; Tannert, T and Froese, T (2022) Design process innovation on brock commons tallwood house. Construction Innovation, 22(1), pp. 23-40. ISSN 1471-4175

Pouryarmohammadi, M; Ahmadi, H and Salaripour, A (2022) Developing physical resilience strategies in passive defense according to identification of endangered areas of urban environments (case study: Ahvaz city). International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 14-30. ISSN 1759-5916

Praticò, F G (2013) New road surfaces: Logical bases for simple quality-related pay adjustments. Journal of Construction Engineering and Management, 139(11): 4013020, ISSN 0733-9364

Praticò, F G; Casciano, A and Tramontana, D (2011) Pavement life-cycle cost and asphalt binder quality: Theoretical and experimental investigation. Journal of Construction Engineering and Management, 137(2), pp. 99-107. ISSN 0733-9364

Prego, F J; Solla, M; Núñez-Nieto, X and Arias, P (2016) Assessing the applicability of ground-penetrating radar to quality control in tunneling construction. Journal of Construction Engineering and Management, 142(5): 06015006, ISSN 0733-9364

Prieto, A J and Silva, A (2020) Service life prediction and environmental exposure conditions of timber claddings in South Chile. Building Research & Information, 48(2), pp. 191-206. ISSN 0961-3218

Prieto, A J; Torres-González, M and Carpio, M (2024) Virtual web-based instruments in the evaluation of functional degradation of heritage timber buildings. Building Research & Information, 52(1-2), pp. 181-193. ISSN 0961-3218

Proverbs, D G (1998) A best practice for high-rise insitu concrete construction based on French, German and UK contractor performance measures. PhD thesis, University of Wolverhampton, UK.

Qureshi, A H; Alaloul, W S; Wing, W K; Saad, S; Alzubi, K M and Musarat, M A (2024) Factors affecting the implementation of automated progress monitoring of rebar using vision-based technologies. Construction Innovation, 24(3), pp. 770-789. ISSN 1471-4175

Rad, H N and Khosrowshahi, F (1998) Quality measurement in construction projects. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Rad, Mahyar Habibi (2022) Impact of lean construction on contractor performance and organisational resilience in post-disaster infrastructure projects. PhD thesis, University of New South Wales, Australia.

Rahman, H A (1993) The management and cost of quality for civil engineering projects. PhD thesis, University of Manchester, UK.

Rahmani Asl, M (2015) A building information model (BIM) based framework for performance optimization. PhD thesis, Texas A&M University, USA.

Rahmouni, S and Smail, R (2020) A design approach towards sustainable buildings in Algeria. Smart and Sustainable Built Environment, 9(3), pp. 229-245. ISSN 2046-6099

Raidén, A B and Räisänen, C (2018) Conceptualising behavioural ambidexterity and the effects on individual well-being. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Rajiv, P; Logesh, R; Vinodh, S and Rajanayagam, D (2014) Financial feasibility and value engineering principles integrated quality function deployment for a manufacturing organization: A case study. Journal of Engineering, Design and Technology, 12(1), pp. 71-88. ISSN 1726-0531

Raman, P G (1977) Information and architectural design: A study of certain theoretical aspects. PhD thesis, University of Edinburgh, UK.

Raouf, A M and Al-Ghamdi, S G (2023) Framework to evaluate quality performance of green building delivery: Construction and operational stage. International Journal of Construction Management, 23(2), pp. 253-267. ISSN 1562-3599

Rasheed, E. O. and Wang, K. (2026) Do overall findings correlate with granular findings? An analysis of factors influencing office workers' thermal comfort and indoor air quality. International Journal of Building Pathology and Adaptation, 44(5), pp. 1211-1231. ISSN 2398-4708

Raslan, R and Davies, M (2012) Legislating building energy performance: Putting EU policy into practice. Building Research & Information, 40(3), pp. 305-316. ISSN 0961-3218

Rathnayake, I; Sridarran, P; Abeynayake, M and Jayakodi, S (2023) Enhancing building performance of post-fire refurbished apparel manufacturing buildings in sri lanka. Built Environment Project and Asset Management, 13(3), pp. 375-393. ISSN 2044-124X

Rautela, P; Chandra Joshi, G and Bhaisora, B (2011) Seismic vulnerability of the health infrastructure in the Himalayan township of Mussoorie, Uttarakhand, India. International Journal of Disaster Resilience in the Built Environment, 2(3), pp. 200-209. ISSN 1759-5916

Rees, J V (1986) Reforming the workplace: A study of self-regulation in occupational safety. PhD thesis, University of California, Berkeley, USA.

Rekola, M; Mäkeläinen, T and Häkkinen, T (2012) The role of design management in the sustainable building process. Architectural Engineering and Design Management, 8(2), pp. 78-89. ISSN 1745-2007

Ren, S; Qiang, G; Tang, S; Zhang, C; Hyung-Joon, S and Wu, K (2024) An automatic design-feedback process for structural prefabricated components quantity take-off calculation using BIM. Architectural Engineering and Design Management, 20(2), pp. 287-302. ISSN 1745-2007

Reposa Jr, J H (2009) Comparison of usgbc LEED for homes and the nahb national green building program. International Journal of Construction Education and Research, 5(2), pp. 108-120. ISSN 1557-8771

Revadigar, S P (1996) Automated analysis of building seismic records. PhD thesis, University of Houston, USA.

Reynolds, M F (1990) Facilities planning and construction internship. DEng thesis, Texas A&M University, USA.

Rho, J-J (1994) A systems engineering model for implementing automation technology into a construction process. PhD thesis, University of Houston, USA.

Ribeiro, F L (2000) The applicability of the quality assurance requirements of the ISO 9000 conformance standards in construction. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Rihani, R A (2006) An investigation of critical success factors for robotic masonry. PhD thesis, North Carolina State University, USA.

Rilett, L R (1998) Effect of variability on end product specifications. Journal of Construction Engineering and Management, 124(2), pp. 139-145. ISSN 0733-9364

Rilett, L R (1998) Identifying component variability of end product specification tests. Journal of Construction Engineering and Management, 124(2), pp. 133-138. ISSN 0733-9364

Rivera, A O (2017) Shifting from management to leadership: A procurement model adaptation to project management. PhD thesis, Arizona State University, USA.

Robinson, E (2021) Multi-stakeholder decision-making in low-energy building design optimization. PhD thesis, Loughborough University, UK.

Rogage, K; Clear, A; Alwan, Z; Lawrence, T and Kelly, G (2020) Assessing building performance in residential buildings using BIM and sensor data. International Journal of Building Pathology and Adaptation, 38(1), pp. 176-191. ISSN 23984708

Rohde, L; Jensen, R L; Larsen, O K; Jønsson, K T and Larsen, T S (2021) Holistic indoor environmental quality assessment as a driver in early building design. Building Research & Information, 49(4), pp. 460-481. ISSN 0961-3218

Rojas Molina, E M (1997) Developing a web-centric process to support inspection. PhD thesis, University of Colorado at Boulder, USA.

Rooke, J A and Kagioglou, M (2007) Criteria for evaluating research: The unique adequacy requirement of methods. Construction Management and Economics, 25(9), pp. 979-987. ISSN 1466433X

Rosenbaum, S; Toledo, M and González, V (2014) Improving environmental and production performance in construction projects using value-stream mapping: Case study. Journal of Construction Engineering and Management, 140(2): 04013045, ISSN 0733-9364

Rosenfeld, Y (2009) Cost of quality versus cost of non-quality in construction: The crucial balance. Construction Management and Economics, 27(2), pp. 107-117. ISSN 1466433X

Rotimi, F E (2013) An evaluative framework for defects in new residential buildings: The New Zealand case. PhD thesis, Auckland University of Technology, New Zealand.

Rounds, J L and Chi, N Y (1985) Total quality management for construction. Journal of Construction Engineering and Management, 111(2), pp. 117-128. ISSN 0733-9364

Rowe, G M; Meegoda, J N; Jumikis, A; Sharrock, M J; Bandara, N and Hettiarachchi, C H (2004) NJTxtr: a computer program based on laser to monitor asphalt segregation. Journal of Construction Engineering and Management, 130(6), pp. 924-934. ISSN 0733-9364

Roy, R; Brown, J and Gaze, C (2003) Re-engineering the construction process in the speculative house-building sector. Construction Management and Economics, 21(2), pp. 137-146. ISSN 01446193

Roy, R and Cochrane, S P (1999) Development of a customer focused strategy in speculative house building. Construction Management and Economics, 17(6), pp. 777-787. ISSN 01446193

Roy, R and Gaze, C (1999) Introduction of new technology for a customer-focused speculative housebuilding industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Royal, S; Lehoux, N and Blanchet, P (2022) New home warranty schemes: Developing a theoretical comparative framework using qualitative content analysis. International Journal of Building Pathology and Adaptation, 40(4), pp. 499-522. ISSN 23984708

Ruiz, R D B; Lordsleem Jr, A C; Rocha, J H A and Irizarry, J (2022) Unmanned aerial vehicles (uav) as a tool for visual inspection of building facades in AEC+FM industry. Construction Innovation, 22(4), pp. 1155-1170. ISSN 1471-4175

Ruokolainen, A and Plat, H T (1998) A system for allocating of private home owners' annual budget to housing. Journal of Financial Management of Property and Construction, 3(3), pp. 37-48. ISSN 1366-4387

Rwelamila, P D and Hall, K A (1995) Total systems intervention: An integrated approach to time, cost and quality management. Construction Management and Economics, 13(3), pp. 235-241. ISSN 01446193

Ryall, P (2012) Implementation and the effectiveness of quality management systems within the construction industry and organisational change management in this process. PhD thesis, University of South Wales, UK.

Ryor, M M (2013) Utilization of risk management practices by construction project managers in the United States. PhD thesis, Capella University, USA.

Räisänen, C and Stenberg, A C (2011) This paper is not in the conference template : The discourse of conference gatekeeping. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Saari, A and Aalto, L (2006) Indoor environment quality contracts in building projects. Building Research & Information, 34(1), pp. 66-74. ISSN 0961-3218

Sabellano, R E (2023) Development of a decision-making tool for bridge preservation and maintenance. DEng thesis, Morgan State University, USA.

Sabri, B K M; Ujang, N; Arif, A M M and Aripin, S (2017) Measures in curbing poor compliance to building control regulation among renovated terrace houses. International Journal of Law in the Built Environment, 9(3), pp. 256-271. ISSN 1756-1450

Sadeh, H; Mirarchi, C; Shahbodaghlou, F and Pavan, A (2023) Predicting the trends and cost impact of COVID-19 OSHA citations on US construction contractors using machine learning and simulation. Engineering, Construction and Architectural Management, 30(8), pp. 3461-3479. ISSN 0969-9988

Safapour, E; Kermanshachi, S and Rouhanizadeh, B (2022) Key components of successful post–hurricane reconstruction of transportation infrastructures. Built Environment Project and Asset Management, 12(5), pp. 775-791. ISSN 2044-124X

Sagoo, A S (2014) A decision support system for evaluating local authority housing maintenance strategies in the United Kingdom. PhD thesis, University of Derby, UK.

Saha, S; Greville, C J and Mullins, T A (2001) Optimisation of construction process inspection rates using a learning approach. Construction Economics and Building, 1(2), pp. 1-13. ISSN 2204-9029

Saha, Swapan Kumar (2002) Predicting realistic performance rate and optimum inspection rate in construction. PhD thesis, University of Western Sydney, Australia.

Sajjad, M; Jayasinghe, C and Perera, P (2024) Damage assessment automation for single storey detached masonry houses: a probabilistic approach. Building Research & Information, 52(5), pp. 551-563. ISSN 0961-3218

Sakhakarmi, S; Park, J and Cho, C (2019) Enhanced machine learning classification accuracy for scaffolding safety using increased features. Journal of Construction Engineering and Management, 145(2): 04018133, ISSN 0733-9364

Sakib, M N; Chaspari, T and Behzadan, A H (2022) A feedforward neural network for drone accident prediction from physiological signals. Smart and Sustainable Built Environment, 11(4), pp. 1017-1041. ISSN 2046-6099

Salah Eldeen Ismaeel Elsayed Ahmed, Walaa (2014) Developing a systemic framework for applying LEED system: Managing energy and materials credits. PhD thesis, Politecnico di Milano, Italy.

Saleh, E (2020) A risk-based approach in selecting design natural hazard loads for temporary structures. PhD thesis, Illinois Institute of Technology, USA.

Salman, A and Ahmad, W (2025) Implementation of augmented reality and mixed reality applications for smart facilities management: A systematic review. Smart and Sustainable Built Environment, 14(1), pp. 254-275. ISSN 2046-6099

Samarakkody, A and Perera, B A K S (2023) Application of soft landings concept in Sri Lanka to narrow the building performance gap, enablers and barriers. Smart and Sustainable Built Environment, 12(1), pp. 156-180. ISSN 2046-6099

Samarakkody, A L; Perera, B A K S and Palliyaguru, R (2022) Appropriateness of soft landings concept for avoiding malpractices in Sri Lankan building projects. International Journal of Construction Management, 22(14), pp. 2817-2829. ISSN 1562-3599

Samasoni, J and Rotimi, J O B (2016) Perceptions of regulatory building inspectors and designers on the proposed risk-based inspection regime in New Zealand. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Samasoni, J C (2017) Evaluating the feasibility of implementing a risk-based inspection scheme by building consent authorities in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Sami Ur Rehman, M; Shafiq, M T and Afzal, M (2022) Impact of COVID-19 on project performance in the UAE construction industry. Journal of Engineering, Design and Technology, 20(1), pp. 245-266. ISSN 1726-0531

Samsami, R (2022) A framework for active construction inspection and visualization using uas. PhD thesis, Michigan Technological University, USA.

Samuels, A F and Bruder, M J (1996) Construction representative: Scheduling and cost management. Journal of Construction Engineering and Management, 122(3), pp. 281-290. ISSN 0733-9364

Sandagomika, H; Bazli, M and Arashpour, M (2026) Quantifying embodied carbon reductions through mixed reality integration in prefabrication: A Monte Carlo-enhanced life cycle approach. Journal of Construction Engineering and Management, 152(5): 04026051, ISSN 0733-9364

Sandanayake, M; Yang, W; Chhibba, N and Vrcelj, Z (2022) Residential building defects investigation and mitigation: a comparative review in Victoria, Australia, for understanding the way forward. Engineering, Construction and Architectural Management, 29(9), pp. 3689-3711. ISSN 0969-9988

Sangiorgio, V; Uva, G and Fatiguso, F (2018) Optimized AHP to overcome limits in weight calculation: Building performance application. Journal of Construction Engineering and Management, 144(2): 04017101, ISSN 0733-9364

Sangiorgio, Valentino (2019) Development of a decision support system for the structural degradation analysis of RC buildings supported by user-reported data and modern information technologies. PhD thesis, Politecnico di Bari, Italy.

Sanni-Anibire, M O and Hassanain, M A (2016) Quality assessment of student housing facilities through post-occupancy evaluation. Architectural Engineering and Design Management, 12(5), pp. 367-380. ISSN 1745-2007

Sanseverino, Anna (2023) Application of BIM methodology for structural inspection and maintenance eco-systems: Semi-automated monitoring procedures to implement different kinds of data into enriched cooperative systems. PhD thesis, Università degli Studi di Salerno, Italy.

Sarigul, F. H. and Gunaydin, H. M. (2026) Integrated BIM, GIS and interoperable digital technologies in lifecycle management of building construction projects: Systematic literature review. Smart and Sustainable Built Environment, 15(5), pp. 1808-1845. ISSN 2046-6099

Sarran, L; Lex, S W and Wærsted, E H (2022) Comfort and technical installations in Danish low-energy homes: Reconnecting design intention and domestic perceptions. Building Research & Information, 50(3), pp. 308-324. ISSN 0961-3218

Sathkumara, T M; Waidyasekara, A S and Victar, H C (2025) The feasibility of transparent solar panels for high-rise building façade in Sri Lanka. Construction Innovation, 25(4), pp. 1127-1152. ISSN 1471-4175

Sati, A and Al-Tabtabai, H (2024) A paradigm shift toward the application of blockchain in enhancing quality information management. Construction Innovation, 24(1), pp. 407-424. ISSN 1471-4175

Sawan, R; Low, J F and Schiffauerova, A (2018) Quality cost of material procurement in construction projects. Engineering, Construction and Architectural Management, 25(8), pp. 974-988. ISSN 0969-9988

Sawhney, A; Walsh, K D; Bashford, H H and Palaniappan, S (2009) Impact of inspected buffers on production parameters of construction processes. Journal of Construction Engineering and Management, 135(4), pp. 319-329. ISSN 0733-9364

Sayed, N; Badawy, A; Attia, T and Ahmed, A (2025) Cost-benefit analysis of recycled materials in road asphalt layer: A case study in Egypt. Built Environment Project and Asset Management, 15(4), pp. 791-807. ISSN 2044-124X

Schmidt, J Q (2024) Overcoming barriers to adoption of smart stormwater technologies. PhD thesis, University of Michigan, USA.

Schmitt, R L (1998) Development of statistically based methods to determine QC/QA testing levels for hot-mix asphalt construction. PhD thesis, University of Wisconsin - Madison, USA.

Schneider, R H (1981) Local construction regulatory process innovation: A comparative analysis of Florida building inspection departments. PhD thesis, University of Florida, USA.

Schoenefeldt, H (2019) The House of Commons: A precedent for post-occupancy evaluation. Building Research & Information, 47(6), pp. 635-665. ISSN 0961-3218

Schraven, D; Hartmann, A and Dewulf, G (2011) Effectiveness of infrastructure asset management: Challenges for public agencies. Built Environment Project and Asset Management, 1(1), pp. 61-74. ISSN 2044-124X

Schultz, C (2012) The role of problem solving in construction management practices. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Schönbeck, P; Löfsjögård, M and Ansell, A (2022) Framework for change control in healthcare construction projects compared to current practice. International Journal of Construction Management, 22(12), pp. 2405-2412. ISSN 1562-3599

Scott, B O B (1995) Competitive advantage through alliancing. Engineering, Construction and Architectural Management, 2(2), pp. 83-92. ISSN 0969-9988

Scott, J; Deveci, G; Edge, M and Martin, P (2004) Towards zero-heating: Affordable models for environmentally friendly housing in Scotland. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Selih, J (2006) Selection of refurbishment actions for residential buildings by multi criteria decision method. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Selĺs, M E S; Rubio, J A C and Mullor, J R (2008) Development of a quantification proposal for hidden quality costs: Applied to the construction sector. Journal of Construction Engineering and Management, 134(10), pp. 749-757. ISSN 0733-9364

Sen, M K; Dutta, S and Kabir, G (2021) Evaluation of interaction between housing infrastructure resilience factors against flood hazard based on rough DEMATEL approach. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 555-575. ISSN 1759-5916

Senaratne, S (2005) A knowledge-based approach to managing project change in the construction phase within collaborative team settings. PhD thesis, University of Salford, UK.

Senaratne, S and Jayarathna, T (2012) Quality planning process of construction contractors: Case studies in Sri Lanka. Journal of Construction in Developing Countries, 17(1), pp. 103-115. ISSN 1823-6499

Senaratne, S and Pasqual, Y S (2011) Learning, teaching and research for construction undergraduate programmes: An exploratory case study in Sri Lanka. International Journal of Construction Management, 11(3), pp. 35-48. ISSN 1562-3599

Senaratne, S and Sexton, M G (2004) Managing construction project change in the knowledge age: A case study. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Senaratne, S and Sexton, M G (2009) Role of knowledge in managing construction project change. Engineering, Construction and Architectural Management, 16(2), pp. 186-200. ISSN 0969-9988

Seraphim, D l (2006) Implementing TQM principles in a construction company in the UAE. PhD thesis, University of South Wales, UK.

Serpell Bley, A F (1990) Improved conceptual estimating performance using a knowledge-based approach. PhD thesis, University of Texas at Austin, USA.

Serugga, J; Kagioglou, M and Tzortzopoulos, P (2020) Value generation in front-end design of social housing with QFD and multiattribute utility theory. Journal of Construction Engineering and Management, 146(4): 04020019, ISSN 0733-9364

Serugga, J; Kagioglou, M and Tzortzopoulos, P (2021) Benefits realization: Novel conceptual model for front end-design decision-making using dempster-shafer theory and quality function deployment. Journal of Construction Engineering and Management, 147(7): 04021062, ISSN 0733-9364

Sexton, M and Barrett, P (2005) Performance-based building and innovation: Balancing client and industry needs. Building Research & Information, 33(2), pp. 142-148. ISSN 0961-3218

Seymour, D and Low, S P (1990) The quality debate. Construction Management and Economics, 8(1), pp. 13-29. ISSN 01446193

Shaker, R A; Elbeltagi, E; Motawa, I; Elmasoudi, I and Elnabwy, M T (2024) Social network analysis for identifying the significant drivers of off-site construction adoption in Egypt. Built Environment Project and Asset Management, 14(4), pp. 607-625. ISSN 2044-124X

Shakoorian, A (2006) Performance assessment of building commissioning process as a quality assurance system. PhD thesis, Georgia Institute of Technology, USA.

Shamsollahi, D; Moselhi, O and Khorasani, K (2024) Automated detection and segmentation of mechanical, electrical, and plumbing components in indoor environments by using the yolact++ architecture. Journal of Construction Engineering and Management, 150(8): 04024100, ISSN 0733-9364

Shanmugapriya, S (2016) Structural equation modelling to investigate the factors influencing quality safety and productivity in construction projects. PhD thesis, Anna University, Chennai, India.

Shari, Zalina (2011) Development of a sustainability assessment framework for Malaysian office buildings using a mixed-methods approach. PhD thesis, University of Adelaide, Australia.

Sharma, N and Laishram, B (2025) Understanding the relevance and impact of the cost of quality in the construction industry: A systematic literature review using prisma. Construction Innovation, 25(6), pp. 1707-1726. ISSN 1471-4175

Sharma, N and Laishram, B (2025) Unveiling the path to the cost of quality implementation in the construction industry: Multivariate analysis. Journal of Construction Engineering and Management, 151(2): 04024202, ISSN 0733-9364

Sharma, N and Laishram, B (2025) Decoding the emergent patterns of cost of quality through the lens of sociotechnical systems: A bibliometric analysis. Journal of Construction Engineering and Management, 151(4): 03125002, ISSN 0733-9364

Sharma, N; Sood, R and Laishram, B (2025) A hybrid PLS-SEM-ANN approach to COQ optimization. Construction Management and Economics, 43(11), pp. 938-960. ISSN 0144-6193

Sharma, V; Al-Hussein, M and Abourizk, S M (2006) Residential construction lot grading approval process optimization: Case study of city of Edmonton. Journal of Construction Engineering and Management, 132(12), pp. 1225-1233. ISSN 0733-9364

Sharp, M and Jones, K (2012) Perceived inefficiency in social housing maintenance. Construction Innovation, 12(4), pp. 414-428. ISSN 1471-4175

Shayboun, M; Kifokeris, D and Koch, C (2019) Construction planning with machine learning. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Shehab-Eldeen, T (2002) An automated system for detection, classification and rehabilitation of defects in sewer pipes. PhD thesis, Concordia University, Canada.

Sherif, K F (2010) Total quality management and construction project management in Libya. PhD thesis, University of Plymouth, UK.

Shi, Z (2024) A BIM-based and data-driven approach for comprehensive façade inspection guidance in cities. PhD thesis, New York University Tandon School of Engineering, USA.

Shi, Z; Park, K and Ergan, S (2025) A taxonomy of urban façade defects and their distribution on façade components: A data-driven analysis of historical inspection reports. Journal of Construction Engineering and Management, 151(10): 04025152, ISSN 0733-9364

Shin, D H (2007) Strategic development of AR systems for industrial construction. PhD thesis, Purdue University, USA.

Shohet, I M (2003) Building evaluation methodology for setting maintenance priorities in hospital buildings. Construction Management and Economics, 21(7), pp. 681-692. ISSN 01446193

Shohet, I M and Frydman, S (2003) Communication patterns in construction at construction manager level. Journal of Construction Engineering and Management, 129(5), pp. 570-577. ISSN 0733-9364

Shohet, I M; Lavy-Leibovich, S and Bar-On, D (2003) Integrated maintenance monitoring of hospital buildings. Construction Management and Economics, 21(2), pp. 219-228. ISSN 01446193

Shohet, I M; Wei, H H; Skibniewski, M J; Tak, B and Revivi, M (2019) Integrated communication, control, and command of construction safety and quality. Journal of Construction Engineering and Management, 145(9): 04019051, ISSN 0733-9364

Shooshtarian, S; Maqsood, T; Wong, P S P; Caldera, S; Ryley, T; Zaman, A and Cáceres Ruiz, A M (2024) Circular economy in action: The application of products with recycled content in construction projects: a multiple case study approach. Smart and Sustainable Built Environment, 13(2), pp. 370-394. ISSN 2046-6099

Short, C A; Cook, M and Lomas, K J (2009) Delivery and performance of a low-energy ventilation and cooling strategy. Building Research & Information, 37(1), pp. 1-30. ISSN 0961-3218

Shourav, Mohammad Sabbir Ahmed (2024) Impact of job quality on construction worker's health and wellbeing: Comparison between Australia and Bangladesh. PhD thesis, RMIT University, Australia.

Shrestha, K and Shrestha, P P (2022) Framework to implement performance-based contracting for chip-seal road maintenance. Journal of Construction Engineering and Management, 148(1): 04021183, ISSN 0733-9364

Shrimant, P B (2013) Implementation of total quality management: An exploratory study of Indian construction industry. PhD thesis, Swami Ramanand Teerth Marathwada University, India.

Shwarka, M and Anigbogu, N A (2012) Impact of the public procurement reform on public building project delivery in Nigeria. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Siemons, J C M M (1992) Occupational safety and health policy implementation: A comparison between Japan and the Netherlands. PhD thesis, University of Twente, Netherlands.

Sikorsky, C S (1990) Product and process integration for the US design-construction industry. PhD thesis, Texas A&M University, USA.

Silva, A S; de Melo, R R S; de Melo, R S S and Costa, D B (2026) Method for quality inspection during the execution of facades based on uas images and machine learning algorithms. International Journal of Construction Management, 26(2), pp. 277-294. ISSN 1562-3599

Silva, A; Dias, J L; Gaspar, P L and De Brito, J (2011) Service life prediction models for exterior stone cladding. Building Research & Information, 39(6), pp. 637-653. ISSN 0961-3218

Silva, Edson Neves da (2021) Proposal for a management system integrating the principles of lean construction with the aspects of quality, safety, environment and occupational health management, focusing on small civil construction companies. PhD thesis, Universidade Federal Fluminense, Brazil.

Simmons, K M; Czajkowski, J and Kovacs, P (2021) Building code effectiveness grading schedule participation analysis. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 67-83. ISSN 1759-5916

Sinesilassie, E G (2017) Determinants of success of public construction projects in Ethiopia. PhD thesis, Indian Institute of Technology Delhi, India.

Singh, D and Tiong, R L K (2005) A fuzzy decision framework for contractor selection. Journal of Construction Engineering and Management, 131(1), pp. 62-70. ISSN 0733-9364

Singh, P; Oh, J E; Labi, S and Sinha, K C (2007) Cost-effectiveness evaluation of warranty pavement projects. Journal of Construction Engineering and Management, 133(3), pp. 217-224. ISSN 0733-9364

Singhaputtangkul, N (2012) Knowledge-based decision support system quality function deployment (kbdss-qfd) tool for assessment of building envelope materials and designs in the early design stage. PhD thesis, National University of Singapore, Singapore.

Singhaputtangkul, N (2017) A decision support tool to mitigate decision-making problems faced by a building design team. Smart and Sustainable Built Environment, 6(1), pp. 2-18. ISSN 2046-6099

Smallwood, J (2006) Scaffolding health and safety: A multi-stakeholder issue. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Smallwood, J J (2010) Excavation health and safety (H&S): A South African perspective. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Smith, A and Wilkins, B (1996) Team relationships and related critical factors in the successful procurement of health care facilities. Journal of Construction Procurement, 2(1), pp. 30-40. ISSN 1358-9180

So, C (2017) Intuitive design: Framing a software test system as a status reporting tool for business. Journal of Engineering, Design and Technology, 15(2), pp. 149-165.

Soetanto, R; Dainty, A R J; Glass, J and Price, A D F (2006) Empirical evaluation of structural frame performance criteria: Realizing the potential of hybrid concrete construction. Journal of Construction Engineering and Management, 132(3), pp. 278-290. ISSN 0733-9364

Soliman, M (2015) Life-cycle management of civil and marine structures under fatigue and corrosion effects. PhD thesis, Lehigh University, USA.

Solla, M; González-Jorge, H; Varela, M and Lorenzo, H (2013) Ground-penetrating radar for inspection of in-road structures and data interpretation by numerical modeling. Journal of Construction Engineering and Management, 139(6), pp. 749-753. ISSN 0733-9364

Soltani, Z (2018) Investigating the persuasiveness of forensic information models for jurors in construction disputes. PhD thesis, Texas A&M University, USA.

Soni, M S M and Smallwood, J (2024) Understanding corruption in the South African construction industry. Journal of Construction Business and Management, 7(1), pp. 45-56. ISSN 2521-0165

Sospeter, N. G.; Awuzie, B. O. and Ngowi, A. (2026) Restoring labour dignity: Analysing decent work improvement strategies in tanzania's circular construction supply chains. Built Environment Project and Asset Management, 16(3), pp. 578-596. ISSN 2044-124X

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Souza, M P D and Fabricio, M M (2024) BIM and virtual reality for pre-design evaluation of building performance. Architectural Engineering and Design Management, 20(5), pp. 1260-1279. ISSN 1745-2007

Souza, Roberto de (1997) Methodology for development and implementation of quality management systems in small and medium size building companies. PhD thesis, Universidade de São Paulo, Brazil.

Sparer, E H (2015) Improving health and safety in construction: The intersection of programs and policies, work organization, and safety climate. DSc thesis, Harvard University, USA.

Sporrong, J and Kadefors, A (2014) Municipal consultancy procurement: New roles and practices. Building Research & Information, 42(5), pp. 616-628. ISSN 0961-3218

Ssenyimba, S; Kigozi, J; Tumutegyereize, P; Muyonga, J H and Mutumba, R (2022) Design and evaluation of a refractance window lab-scale dryer. Journal of Engineering, Design and Technology, 20(6), pp. 1499-1518. ISSN 1726-0531

Staab, G E (1989) Construction of port and facilities on horn of Africa: lessons learned. Journal of Construction Engineering and Management, 115(1), pp. 53-69. ISSN 0733-9364

Staffa Junior, L B; Bastos Costa, D; Torres Nogueira, J L and Silva, A S (2025) Web platform for building roof maintenance inspection using uas and artificial intelligence. International Journal of Building Pathology and Adaptation, 43(1), pp. 4-28. ISSN 2398-4708

Stanic, N (2016) Assessment methods for structural and hydraulic properties of concrete sewer pipes. PhD thesis, Delft University of Technology, Netherlands.

Stansfield, F R (1995) Work in the IT industry on usability provides an agenda for improvement of construction procurement methods. Journal of Construction Procurement, 1(2), pp. 124-149. ISSN 1358-9180

Staples, C and Spillane, J (2019) Exploring the potential improvement of quality control in the construction industry with the use of digital technology. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Staub-French, S; Pilon, A; Poirier, E; Fallahi, A; Kasbar, M; Calderon, F; Teshnizi, Z and Froese, T (2022) Construction process innovation on brock commons tallwood house. Construction Innovation, 22(1), pp. 1-22. ISSN 1471-4175

Stenlund, K L; Ryd, N and Vennström, A (2009) Client's decisions in strategic briefs and their impact on user values. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Stevens, M S (2012) Impact of key management practices on overhead to direct cost ratio for specialty construction contractors. PhD thesis, University of Florida, USA.

Stevenson, F (2019) Embedding building performance evaluation in UK architectural practice and beyond. Building Research & Information, 47(3), pp. 305-317. ISSN 0961-3218

Stevenson, F and Baborska-Narozny, M (2018) Housing performance evaluation: Challenges for international knowledge exchange. Building Research & Information, 46(5), pp. 501-512. ISSN 0961-3218

Stevenson, F and Rijal, H B (2010) Developing occupancy feedback from a prototype to improve housing production. Building Research & Information, 38(5), pp. 549-563. ISSN 0961-3218

Stewart, L (2022) Business strategies for reducing professional labor shortages within the u.S. Construction industry. DBA thesis, Walden University, USA.

Stewart, M G (1993) Modeling human performance in reinforced concrete beam construction. Journal of Construction Engineering and Management, 119(1), pp. 6-22. ISSN 0733-9364

Stewart, R A and Spencer, C A (2006) Six-sigma as a strategy for process improvement on construction projects: A case study. Construction Management and Economics, 24(4), pp. 339-348. ISSN 01446193

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Straub, A (2002) Strategic technical management of housing stock: Lessons from Dutch housing associations. Building Research & Information, 30(5), pp. 372-381. ISSN 0961-3218

Struck, C (2012) Uncertainty propagation and sensitivity analysis techniques in building performance simulation to support conceptual building and system design. PhD thesis, Eindhoven University of Technology, Netherlands.

Stundon, D; Spillane, J; Lim, J P B; Tansey, P and Tracey, M (2015) Building information modelling energy performance assessment on domestic dwellings: A comparative study. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Sturk, R (1998) Engineering geological information: Its value and impact on tunnelling. DrTech thesis, Kungliga Tekniska Hogskolan, Sweden.

Su, Y.; Gao, X. and Zheng, Z. (2026) Unsupervised deep learning and Bayesian network-based identification of key risk factors in construction quality defects. Journal of Construction Engineering and Management, 152(7): 04026083, ISSN 0733-9364

Suksuwan, N and Hadikusumo, B H (2010) Condition rating system for Thailand's concrete bridges. Journal of Construction in Developing Countries, 15(1), pp. 1-27. ISSN 1823-6499

Sullivan, K T; Kashiwagi, D; Savicky, J; Kashiwagi, M; Egbu, C and Chang, C K (2006) Increasing performance by minimizing the passing of information. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Sultan, Mohamed (2025) PPP contracts for healthcare facilities in Canada: Qualitative study to identify lessons learned. PhD thesis, Arizona State University, USA.

Sun, X (2016) Energy-efficient retrofits for existing buildings: a multi-dimensional, comparative study of buildings in Hong Kong, Shanghai and Singapore, with focus on operation and maintenance. PhD thesis, University of Hong Kong, Hong Kong.

Sunikka-Blank, M and Galvin, R (2012) Introducing the prebound effect: The gap between performance and actual energy consumption. Building Research & Information, 40(3), pp. 260-273. ISSN 0961-3218

Sunindijo, R Y and Zou, P X W (2011) Influence of technical skill on safety task implementation and safety climate development in construction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Sutrisna, M; Ramnauth, V and Zaman, A (2022) Towards adopting off-site construction in housing sectors as a potential source of competitive advantage for builders. Architectural Engineering and Design Management, 18(3), pp. 165-183. ISSN 1745-2007

Symonds, P; Taylor, J; Mavrogianni, A; Davies, M; Shrubsole, C; Hamilton, I and Chalabi, Z (2017) Overheating in English dwellings: Comparing modelled and monitored large-scale datasets. Building Research & Information, 45(1-2), pp. 195-208. ISSN 0961-3218

Ta'i, Behnam (1994) Critical evaluation of stormwater management practices on urban construction sites in the Sydney region. PhD thesis, University of New South Wales, Australia.

Tabish, S Z S (2011) Critical success factors and fair performance in public construction projects. PhD thesis, Indian Institute of Technology Delhi, India.

Tabish, S Z S and Jha, K N (2011) Analyses and evaluation of irregularities in public procurement in India. Construction Management and Economics, 29(3), pp. 261-274. ISSN 1466433X

Tade, O; O’Neill, S; Smith, K G; Williams, T; Ali, A; Bayyati, A and See, H (2019) Modified sewer asset management to accommodate London's future sustainable development. International Journal of Building Pathology and Adaptation, 37(1), pp. 22-41. ISSN 23984708

Talebi, S; Wu, S; Al-Adhami, M; Shelbourn, M and Serugga, J (2022) The development of a digitally enhanced visual inspection framework for masonry bridges in the UK. Construction Innovation, 22(3), pp. 624-646. ISSN 1471-4175

Tam, C M; Deng, Z M; Zeng, S X and Ho, C S (2000) Quest for continuous quality improvement for public housing construction in Hong Kong. Construction Management and Economics, 18(4), pp. 437-446. ISSN 01446193

Tam, V W Y and Le, K N (2008) On using the Gaussian and hyperbolic distributions to improve quality in construction. Journal of Engineering, Design and Technology, 6(2), pp. 112-123. ISSN 1726-0531

Tam, V W Y; Le, K N and Le, H N (2008) Using Gaussian and hyperbolic distributions for quality improvement in construction: Case study approach. Journal of Construction Engineering and Management, 134(7), pp. 555-561. ISSN 0733-9364

Tan, W (2015) Knowledge management in the construction industry: The strategy of Singapore. International Journal of Construction Management, 15(1), pp. 10-16. ISSN 1562-3599

Taneja, S; Akinci, B; Garrett, J H; Soibelman, L; Ergen, E; Pradhan, A; Tang, P; Berges, M; Atasoy, G; Liu, X; Shahandashti, S M and Anil, E B (2011) Sensing and field data capture for construction and facility operations. Journal of Construction Engineering and Management, 137, pp. 870-881. ISSN 0733-9364

Tao, X (2023) Distributed common data environment for secure BIM-based collaborative design using blockchain technology. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Tarekegn Gurmu, A and Mahmood, M N (2024) Critical factors affecting quality in building construction projects: Systematic review and meta-analysis. Journal of Construction Engineering and Management, 150(3): 04024004, ISSN 0733-9364

Tatum, C B (1983) Innovations in nuclear concrete construction. Journal of Construction Engineering and Management, 109(2), pp. 131-145. ISSN 0733-9364

Tawfiq, O H (2007) Doing contracting differently. PhD thesis, University of Bristol, UK.

Taylor, T (2014) Assessing the thermal performance of buildings at the construction stage using thermography: development and evaluation of a testing approach in the context of new housing in Wales. PhD thesis, Cardiff Metropolitan University, UK.

Tea, S; Panuwatwanich, K; Ruthankoon, R and Kaewmoracharoen, M (2022) Multiuser immersive virtual reality application for real-time remote collaboration to enhance design review process in the social distancing era. Journal of Engineering, Design and Technology, 20(1), pp. 281-298. ISSN 1726-0531

Terouhid, S A (2013) A dynamic decision support system for organizational sustainability excellence of construction firms. PhD thesis, University of Florida, USA.

Tesfamariam, S (2008) Seismic risk assessment of reinforced concrete buildings using fuzzy based techniques. PhD thesis, University of Ottawa, Canada.

Thaesler-Garibaldi, M P (2005) A methodology to develop an integrated engineering system to estimate quantities for bridge repairs at the pre-design stage. PhD thesis, Georgia Institute of Technology, USA.

Thakur, N; Awasthi, Y K; Hooda, M and Siddiqui, A S (2019) Adaptive whale optimization for intelligent multi-constraints power quality improvement under deregulated environment. Journal of Engineering, Design and Technology, 17(3), pp. 490-514. ISSN 1726-0531

Thallapureddy, S (2024) Optimizing incident investigation information collection in the construction industry. PhD thesis, University of Colorado at Boulder, USA.

Thanu H P; Rajasekaran C and Deepak M D (2023) Assessing the life cycle performance of green building projects: A building performance score (BPS) model approach. Architectural Engineering and Design Management, 19(4), pp. 378-393. ISSN 1745-2007

Thanu H P; Rajasekaran C and Deppak M D (2022) Developing a building performance score model for assessing the sustainability of buildings. Smart and Sustainable Built Environment, 11(1), pp. 143-161. ISSN 2046-6099

Thawanapong, C and Tachakitkachorn, T (2026) The sequence of activities for digital twin implementation for building operations by industrial practitioners: A multiple case study analysis in Thailand. International Journal of Construction Management, 26(5), pp. 825-839. ISSN 1562-3599

Thomas, L E (2017) Combating overheating: Mixed-mode conditioning for workplace comfort. Building Research & Information, 45(1-2), pp. 176-194. ISSN 0961-3218

Thompson, N E (2005) Business excellence: lessons for the construction industry. PhD thesis, Loughborough University, UK.

Thomsen, J; Berker, T; Lappegard Hauge, Å; Denizou, K; Wågø, S and Jerkø, S (2013) The interaction between building and users in passive and zero-energy housing and offices:The role of interfaces, knowledge and user commitment. Smart and Sustainable Built Environment, 2(1), pp. 43-59. ISSN 2046-6099

Thomson, D S; Austin, S A; Devine-Wright, H and Mills, G R (2003) Managing value and quality in design. Building Research & Information, 31(5), pp. 334-345. ISSN 0961-3218

Thoradeniya, D; Jayasinghe, C; Ariyaratne, I E and Basnayake, G B M A (2026) Construction quality framework for school buildings: Damage detection and rectification prioritization. International Journal of Construction Management, 26(4), pp. 660-678. ISSN 1562-3599

Thuse, D G (1988) Road transport investment model using dynamic programming. PhD thesis, Indian Institute of Technology, Bombay, India.

Tian, F.; Zeng, N.; Li, Z.; Ge, Q.; Wang, Q. and Li, Q. (2026) Defect trigger identification in a construction digital twin using quality linked data and iterative deviation computation. Journal of Construction Engineering and Management, 152(8): 04026105, ISSN 0733-9364

Tibon, N R and Suiza, R M (2018) Quantification of seismic exposure and vulnerability of historic buildings in Metro Manila. International Journal of Disaster Resilience in the Built Environment, 9(3), pp. 249-257. ISSN 1759-5916

Tien, I (2014) Bayesian network methods for modeling and reliability assessment of infrastructure systems. PhD thesis, University of California, Berkeley, USA.

Tierney, G and Tennant, S (2015) House building in Scotland: The sustainability performance gap. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Tierney, G and Tennant, S (2016) Post occupancy evaluation (POE): A BREEAM excellent case study. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Tiew, S Y (2025) Improving professional development through building contract administration (bca) framework of housing projects for graduate architects. Engineering, Construction and Architectural Management, 32(8), pp. 5272-5290. ISSN 0969-9988

Tiew, S Y (2025) Performance barriers and competence development of graduate architects in construction contract administration (cca): The mediating role of cca skills. Engineering, Construction and Architectural Management, 32(8), pp. 5609-5637. ISSN 0969-9988

Tiew, S Y (2025) A construction contract administration (cca) framework for graduate architects' professional development. Engineering, Construction and Architectural Management, 32(12), pp. 8056-8072. ISSN 0969-9988

Toakley, A R and Marosszeky, M (2003) Towards total project quality - A review of research needs. Engineering, Construction and Architectural Management, 10(3), pp. 219-228. ISSN 0969-9988

Todd, J A; Crawley, D; Geissler, S and Lindsey, G (2001) Comparative assessment of environmental performance tools and the role of the green building challenge. Building Research & Information, 29(5), pp. 324-335. ISSN 0961-3218

Torbica, Z M (1997) Total quality management and customer satisfaction in homebuilding. PhD thesis, University of Florida, USA.

Torbica, Z M and Stroh, R C (1999) Impact of total quality management on home-buyer satisfaction. Journal of Construction Engineering and Management, 125(3), pp. 198-203. ISSN 0733-9364