Items with Subject: mechanical systems

Abbott, C; Jeong, K and Allen, S (2006) The economic motivation for innovation in small construction companies. Construction Innovation, 6(3), pp. 187-196. ISSN 1471-4175

Abdallah, M A A (2014) Optimizing the selection of sustainability measures for existing buildings. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Abdul Mujeebu, M and Ashraf, N (2020) Impact of location and deadband on energy performance of nano aerogel glazing for office building in Saudi Arabia. Building Research & Information, 48(6), pp. 645-658. ISSN 0961-3218

AbdulAzeez, A D; Etubi, U and Umar, B (2019) An assessment of multi-skilling in addressing skills shortage in Nigerian construction firms. African Journal of Built Environment Research, 3(1), pp. 1-13. ISSN 2414-0236

Abisuga, A O; Famakin, I O and Oshodi, O S (2016) Educational building conditions and the health of users. Construction Economics and Building, 16(4), pp. 19-34. ISSN 2204-9029

Abraham, D M and Joanne Yeh, M H (1999) Breakwater construction: An effective method for industrial waste utilization. Engineering, Construction and Architectural Management, 6(2), pp. 145-154. ISSN 0969-9988

Abrahams, G (2017) Revealing and exploring the insider/outsider role of the building control officer in England. Architectural Engineering and Design Management, 13(4), pp. 278-290. ISSN 1745-2007

Acheampong, P (2013) Employers' perception of graduates with entry-level technical skills from construction industry programs in Ghana and Nigeria. PhD thesis, Pennsylvania State University, USA.

Adebisi, J and McArthur, J J (2025) HVAC characterisation of existing Canadian buildings for decarbonisation retrofit identification. Buildings & Cities, 6(1), pp. 729-746. ISSN 2632-6655

Adeyemi, H O; Adejuyigbe, S B; Ismaila, S O and Adekoya, A F (2015) Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(3), pp. 419-434.

Ahmad, A M (2014) The use of refurbishment, flexibility, standardisation and BIM to support the design of a change-ready healthcare facility. PhD thesis, Loughborough University, UK.

Ahmadian Fard Fini, A; Maghrebi, M; Forsythe, P J and Waller, T S (2022) Using existing site surveillance cameras to automatically measure the installation speed in prefabricated timber construction. Engineering, Construction and Architectural Management, 29(2), pp. 573-600. ISSN 0969-9988

Aka, A; Bamgbade, A A; Saidu, I and Balogun, O M (2019) A conceptual framework for waste identification and reduction in Nigerian sandcrete blocks production process. Construction Innovation, 19(3), pp. 405-423. ISSN 1471-4175

Al Bunni, A (2020) Refurbishment of UK state school buildings: a strategy and framework for BIM-based digital twinning. PhD thesis, De Montfort University, UK.

Al-Janabi, A and Al-Khatri, H (2025) Thermal and economic impact of geothermal passive cooling for eco-house applications in the maritime desert climate. Building Research & Information, 53(1-2), pp. 220-241. ISSN 0961-3218

Al-Khazraji, M S; Jweeg, M J and Bakhy, S H (2024) Free vibration analysis of a laminated honeycomb sandwich panel: A suggested analytical solution and a numerical validation. Journal of Engineering, Design and Technology, 22(2), pp. 316-343. ISSN 1726-0531

Alashari, M; El-Rayes, K and Alotaibi, M (2023) Optimizing the planning of maintenance activities in education buildings. Journal of Construction Engineering and Management, 149(10): 04023094, ISSN 0733-9364

Alencastro, J; Fuertes, A and de Wilde, P (2020) Quality management in UK social housing projects: Addressing thermal performance. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ali, A S; Azmi, N F and Baaki, T K (2018) Cost performance of building refurbishment works: The case of Malaysia. International Journal of Building Pathology and Adaptation, 36(1), pp. 41-62. ISSN 23984708

Ali, N (2018) A framework for designing energy efficient dwellings satisfying socio-cultural needs in hot climates. PhD thesis, De Montfort University, UK.

Ali Khan, M S; Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(1), pp. 196-210.

Alidadi Shamsabadi, A; Jahangiri, M; Rezaei, T; Yadollahi Farsani, R; Seryani, A and Hakim, S (2022) The design of a seasonal heat storage system with a geothermal heat pump for a residential building in Tehran. Journal of Engineering, Design and Technology, 20(6), pp. 1606-1626. ISSN 1726-0531

Aliu, J; Oke, A E and Oni, S B (2024) Evaluating strategies to promote mechatronics deployment in AECO projects: A Nigerian construction practitioners' perspectives. International Journal of Construction Management, 24(14), pp. 1540-1549. ISSN 1562-3599

Allenby, V R (1986) Cost models for engineering services. PhD thesis, Aston University, UK.

Almufarrej, A M and Erfani, T (2023) Climate, buildings' envelope design and energy patterns: Improving energy performance of new buildings in Kuwait. Engineering, Construction and Architectural Management, 30(1), pp. 172-188. ISSN 0969-9988

Alolote Ibim, A and Dimkpa, K (2022) Assessing the cost accuracy of electrical works towards sustainable procurement of building services. International Journal of Construction Management, 22(10), pp. 1974-1982. ISSN 1562-3599

Alruwaythi, O and Goodrum, P (2019) A difference in perspective: Impact of different formats of engineering information and spatial cognition on craft-worker eye-gaze patterns. Journal of Construction Engineering and Management, 145(11): 04019065, ISSN 0733-9364

Alshboul, O and Shehadeh, A (2026) Adaptive integration of BIM and Navisworks for real-time clash detection using the XGBoost algorithm. Journal of Construction Engineering and Management, 152(1): 04025232, ISSN 0733-9364

Alves Tenório de Morais, G and Casado Lordsleem Júnior, A (2019) Building maintenance management activities in a public institution. Engineering, Construction and Architectural Management, 26(1), pp. 85-103. ISSN 0969-9988

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(3), pp. 290-303. ISSN 2044-124X

Amin, R A (2016) Condition-based maintenance: innovation in building maintenance management. PhD thesis, University College London, UK.

Aminou Moussavou, A A; Ayeleso, A O; Adonis, M and Raji, A (2023) Design and performance evaluation of selective energy optimization of PV/t system. Journal of Engineering, Design and Technology, 21(5), pp. 1461-1480. ISSN 1726-0531

Amirkhani, S (2022) Minimum energy efficiency standard (MEES) requirements and the impact on the UK hotel buildings stock. PhD thesis, University of West London, UK.

Andrawus, J; Watson, J and Kishk, M (2007) Maintenance optimisation of wind turbines: Lessons for the built environment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Arakawa Martins, L; Soebarto, V; Williamson, T and Pisaniello, D (2022) Personal thermal comfort models: A deep learning approach for predicting older people's thermal preference. Smart and Sustainable Built Environment, 11(2), pp. 245-270. ISSN 2046-6099

Asjad, M; Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(1), pp. 33-53.

Atalah, A (2008) Effect of rock trenching vibrations on nearby structures. Journal of Construction Engineering and Management, 134(4), pp. 234-241. ISSN 0733-9364

Aye, L and Fuller, R J (2005) The proposed heating and cooling system in the CH2 building and its impact on occupant productivity. Construction Economics and Building, 5(2), pp. 32-39. ISSN 2204-9029

Aziabah Akanvose, A B (2018) Better public housing management in Ghana: An approach to improve maintenance and housing quality. PhD thesis, Delft University of Technology, Netherlands.

Baborska-Narozny, M; Szulgowska-Zgrzywa, M; Mokrzecka, M; Chmielewska, A; Fidorow-Kaprawy, N; Stefanowicz, E; Piechurski, K and Laska, M (2020) Climate justice: Air quality and transitions from solid fuel heating. Buildings & Cities, 1(1), pp. 120-140. ISSN 2632-6655

Bacon, M (2014) Occupancy analytics: A new basis for low-energy-low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(1-2), pp. 146-163. ISSN 1745-2007

Badi, S and Diamantidou, D (2017) A social network perspective of building information modelling in Greek construction projects. Architectural Engineering and Design Management, 13(6), pp. 406-422. ISSN 1745-2007

Bailey, D (2016) A performance evaluation of mainstream timber framed and traditional masonry housing in the UK. PhD thesis, University of Nottingham, UK.

Bajere, P A (1996) Maintenance conditions and occupant behavior in government-provided housing in Lagos, Nigeria. DIT thesis, University of Northern Iowa, USA.

Bakhtiyari, S; Kalali, A; Taghi Akbari, L and Farahbod, F (2017) The experimental behavior of CFRP-strengthened reinforced concrete slabs with fire protection systems subjected to standard fire exposure. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 238-250. ISSN 1759-5916

Barbosa, Adriano Aurelio Ribeiro (2014) Implementing a sound power method for testing noise on masonry saw. PhD thesis, Universidade Estadual de Campinas, Brazil.

Beainy, F; Commuri, S and Zaman, M (2012) Quality assurance of hot mix asphalt pavements using the intelligent asphalt compaction analyzer. Journal of Construction Engineering and Management, 138(2), pp. 178-187. ISSN 0733-9364

Beauregard, M A (2019) Maintaining performance evidence-based educational facility management through a decision-support tool leveraging prior empirical research. PhD thesis, Arizona State University, USA.

Bennett, W J (2005) Experiences of women in the nontraditional skilled construction trades. PhD thesis, Walden University, USA.

Bhaurkar, V P and Thakur, A G (2019) Investigation of crack in beams using anti-resonance technique and FEA approach. Journal of Engineering, Design and Technology, 17(6), pp. 1266-1284. ISSN 1726-0531

Bienvenido-Huertas, D; Vargas, E S; Esquivias, P M; de la Hoz Torres, M L; Aguilar, A J; Álvarez, J M D and Aires, M D M (2025) Study on the perception of architecture and building engineering students about the usefulness of quiz games. International Journal of Construction Education and Research, 21(2), pp. 189-212. ISSN 1557-8771

Birgonul, Z (2021) A receptive-responsive tool for customizing occupant's thermal comfort and maximizing energy efficiency by blending BIM data with real-time information. Smart and Sustainable Built Environment, 10(3), pp. 504-535. ISSN 2046-6099

Bonham, D R; Goodrum, P M; Littlejohn, R and Albattah, M A (2017) Application of data mining techniques to quantify the relative influence of design and installation characteristics on labor productivity. Journal of Construction Engineering and Management, 143(8): 04017052, ISSN 0733-9364

Bourikas, L; Costanza, E; Gauthier, S; James, P A B; Kittley-Davies, J; Ornaghi, C; Rogers, A; Saadatian, E and Huang, Y (2018) Camera-based window-opening estimation in a naturally ventilated office. Building Research & Information, 46(2), pp. 148-16. ISSN 0961-3218

Boussaa, Y; Dodoo, A; Nguyen, T and Rupar-Gadd, K (2024) Comprehensive renovation of a multi-apartment building in Sweden: Techno-economic analysis with respect to different economic scenarios. Building Research & Information, 52(4), pp. 463-478. ISSN 0961-3218

Brooks, T and Spillane, J (2017) Lies, damned lies and quality management systems: A pilot case study. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Brown, N; Wright, A J; Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(1), pp. 80-91. ISSN 0961-3218

Bruce-Konuah, A; Jones, R V and Fuertes, A (2023) A method for estimating scheduled and manual override heating behaviour and settings from measurements in low energy UK homes. International Journal of Building Pathology and Adaptation, 41(1), pp. 25-44. ISSN 23984708

Buhamdan, S; Duncheva, T and Alwisy, A (2021) Developing a BIM and simulation-based hazard assessment and visualization framework for CLT construction design. Journal of Construction Engineering and Management, 147(3): 04021003, ISSN 0733-9364

Bulsara, M A; Hingu, A D and Vaghasiya, P S (2016) Energy loss due to unbalance in rotor–shaft system. Journal of Engineering, Design and Technology, 14(2), pp. 277-285.

Burgett, J M; Perrenoud, A and Smith, J P (2018) Identification and prioritization of critical subject matter within mechanical systems curriculum in construction management education. International Journal of Construction Education and Research, 14(4), pp. 295-312. ISSN 1557-8771

Butler, R D (1989) Minority ownership in the construction industry of the puget sound region of Washington state and its struggle for equality. PhD thesis, United States International University, USA.

Camacho-Montano, S C; Cook, M and Wagner, A (2020) Avoiding overheating in existing school buildings through optimized passive measures. Building Research & Information, 48(4), pp. 349-363. ISSN 0961-3218

Cao, W (2019) Data interpretation for infrastructure system diagnosis and prognosis based on model falsification. PhD thesis, National University of Singapore, Singapore.

Carreira, P; Castelo, T; Gomes, C C; Ferreira, A; Ribeiro, C and Costa, A A (2018) Virtual reality as integration environments for facilities management: Application and users perception. Engineering, Construction and Architectural Management, 25(1), pp. 90-112. ISSN 0969-9988

Carreira, P; Castelo, T; Gomes, C C; Ferreira, A; Ribeiro, C and Costa, A A (2018) Virtual reality as integration environments for facilities management: Application and users' perceptions. Engineering, Construction and Architectural Management, 25(1), pp. 90-112. ISSN 0969-9988

Carrick, D (2022) How factors of collaboration affect delivery of construction projects with a high degree of reliance on building services: an action research and cross-case study analysis of Edinburgh primary schools. DProf thesis, University of Salford, UK.

Chaudhari, R; Goodrum, P; Brady, N; Jones, M; Hallowell, M; Yeh, T and Bhandari, S (2025) Exploring the impact of augmented reality on work performance in a full-scale MEP assembly task: Study of industry and novice populations. Journal of Construction Engineering and Management, 151(12): 04025189, ISSN 0733-9364

Chen, K W; Teitelbaum, E; Meggers, F; Pantelic, J and Rysanek, A (2021) Exploring membrane-assisted radiant cooling for designing comfortable naturally ventilated spaces in the tropics. Building Research & Information, 49(5), pp. 483-495. ISSN 0961-3218

Chen, Q; Adey, B T; Haas, C T and Hall, D M (2022) Exploiting digitalization for the coordination of required changes to improve engineer-to-order materials flow management. Construction Innovation, 22(1), pp. 76-100. ISSN 1471-4175

Chew, M Y L and Tan, S S (2004) A multivariate approach to maintenance prediction of wet areas. Construction Management and Economics, 22(4), pp. 395-407. ISSN 01446193

Cho, Sung Eun (2025) Machine learning approaches for improving construction materials and pavement systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Choi, J and Song, H (2014) Evaluation of the modular method for industrial plant construction projects. International Journal of Construction Management, 14(3), pp. 171-180. ISSN 1562-3599

Choi, Y; Kim, D C; Kim, S S; Nam, M S and Kim, T H (2013) Implementation of noise-free and vibration-free PHC screw piles on the basis of full-scale tests. Journal of Construction Engineering and Management, 139(8), pp. 960-967. ISSN 0733-9364

Chowdhury, S; Ren, Z; Rouhana, F; Wang, J and Zhu, J (2024) Exploring sustainability in resource management: Implementation of a water-energy-human nexus framework at a university campus. Journal of Construction Engineering and Management, 150(10): 04024140, ISSN 0733-9364

Clark, G G (1993) Rule-based integrated building management systems. PhD thesis, Brunel University, UK.

Comiskey, D; McKane, M; Jaffrey, A; Wilson, P and Mordue, S (2017) An analysis of data sharing platforms in multidisciplinary education. Architectural Engineering and Design Management, 13(4), pp. 244-261. ISSN 1745-2007

Commuri, S; Mai, A T and Zaman, M (2011) Neural network-based intelligent compaction analyzer for estimating compaction quality of hot asphalt mixes. Journal of Construction Engineering and Management, 137(9), pp. 634-644. ISSN 0733-9364

Cooper, G (2008) Escaping the house: Comfort and the California garden. Building Research & Information, 36(4), pp. 373-380. ISSN 0961-3218

Crawley, J; Wade, F and De Wilde, M (2023) Gender and the heat pump transition. Buildings & Cities, 4(1), pp. 948-964. ISSN 2632-6655

Cribbs, J (2016) Workflow management using building information modeling (BIM) for prefabrication in a construction retrofit environment. PhD thesis, Arizona State University, USA.

Curran, M and Spillane, J P (2020) External stakeholder management and engagement on urban construction projects in Ireland. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 174(2), pp. 59-68. ISSN 17514304

Da Silva, W O P; Farias, B A; Monteiro, I B; Pegorini, V; Casanova, D and Bisconsini, D R (2024) Development of global quality index of unpaved roads. Journal of Construction Engineering and Management, 150(1): 04023147, ISSN 0733-9364

Dabok, M M (2022) A training and skills development conceptual framework for construction technicians in Nigeria. PhD thesis, University of Central Lancashire, UK.

Dada, J O and Jagboro, G O (2012) Core skills requirement and competencies expected of quantity surveyors: Perspectives from quantity surveyors, allied professionals and clients in Nigeria. Construction Economics and Building, 12(4), pp. 78-90. ISSN 2204-9029

Dahlan, N D; Ghaffarianhoseini, A and Hassan, N (2022) Sensory and physiological assessment of spatial transient thermal environment changes at a tropical university campus. Smart and Sustainable Built Environment, 11(3), pp. 516-531. ISSN 2046-6099

Dallasega, P; Schulze, F and Revolti, A (2023) Augmented reality to overcome visual management implementation barriers in construction: A mep case study. Construction Management and Economics, 41(3), pp. 232-255. ISSN 01446193

Dartevelle, O; van Moeseke, G; Masy, G; Mlecnik, E and Altomonte, S (2024) On the effectiveness of passive controls for summer thermal comfort in highly insulated dwellings. Building Research & Information, 52(3), pp. 311-331. ISSN 0961-3218

Das, S; Chew, M Y L and Poh, K L (2010) Multi-criteria decision analysis in building maintainability using analytical hierarchy process. Construction Management and Economics, 28(10), pp. 1043-1056. ISSN 1466433X

Dat Tien, D; GhaffarianHoseini, A; Naismith, N; Ghaffarianhoseini, A; Zhang, T and Tookey, J (2021) Examining critical perspectives on building information modelling (BIM) adoption in New Zealand. Smart and Sustainable Built Environment, 10(4), pp. 594-615. ISSN 2046-6099

Dave, N; Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology, 18(5), pp. 1321-1333. ISSN 1726-0531

Delghust, M; Roelens, W; Tanghe, T; De Weerdt, Y and Janssens, A (2015) Regulatory energy calculations versus real energy use in high-performance houses. Building Research & Information, 43(6), pp. 675-690. ISSN 0961-3218

Desta, S (2024) A qualitative analysis of Maryland smart homebuilders’ perception regarding the internet of things (IoT) adoption risks. PhD thesis, Capella University, USA.

Devine-Wright, P; Wrapson, W; Henshaw, V and Guy, S (2014) Low carbon heating and older adults: Comfort, cosiness and glow. Building Research & Information, 42(3), pp. 288-299. ISSN 0961-3218

Disney, O; Roupé, M and Johansson, M (2023) Driving circularity with total BIM: An integrated approach to data-driven design. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Donato, V; Lo Turco, M and Bocconcino, M M (2018) BIM-QA/QC in the architectural design process. Architectural Engineering and Design Management, 14(3), pp. 239-254. ISSN 1745-2007

Dormohamadi, M; Tahbaz, M and Velashjerdi Farahani, A (2025) Performance evaluation of a single-side windcatcher in the transitional seasons (case study: Khousf Town, Southern Khorasan Province, Iran). International Journal of Building Pathology and Adaptation, 43(3), pp. 338-368. ISSN 2398-4708

Dossick, C S and Neff, G (2010) Organizational divisions in BIM-enabled commercial construction. Journal of Construction Engineering and Management, 136(4), pp. 459-467. ISSN 0733-9364

Du, H; Han, Q and De Vries, B (2025) The effects of social influence on low-cost and high-cost household energy-efficient product adoption: A case study in wuhan. Smart and Sustainable Built Environment, 14(6), pp. 1908-1926. ISSN 2046-6099

Dubler, C R (2011) Evaluating waste associated with building information exchange using lean theory. PhD thesis, Pennsylvania State University, USA.

Edwards, D J and Holt, G D (2005) Exposure to hand-arm vibration: Implications of new statutory requirements. Building Research & Information, 33(3), pp. 257-266. ISSN 0961-3218

Edwards, D J and Holt, G D (2006) Hand-arm vibration exposure from construction tools: Results of a field study. Construction Management and Economics, 24(2), pp. 209-217. ISSN 01446193

Edwards, D J and Holt, G D (2006) Hand-arm vibration controls: A perspective based on performance and cost dimensions. Journal of Financial Management of Property and Construction, 11(1), pp. 21-32. ISSN 1366-4387

Edwards, D J and Holt, G D (2007) Construction hand tools: Vibration emissions from alternative inserts. Building Research & Information, 35(3), pp. 329-342. ISSN 0961-3218

Edwards, D J and Holt, G D (2008) Health and safety issues relating to construction excavators and their attachments. Engineering, Construction and Architectural Management, 15(4), pp. 321-335. ISSN 0969-9988

Edwards, D J and Holt, G D (2010) Cost-effective risk assessment of hand-arm vibration exposure. Journal of Financial Management of Property and Construction, 15(2), pp. 158-175. ISSN 1366-4387

Edwards, D J; Martek, I; Ejohwomu, O; Aigbavboa, C and Hosseini, M R (2021) Hand-arm vibration management: An operational health and safety strategy framework. International Journal of Building Pathology and Adaptation, 39(5), pp. 811-830. ISSN 23984708

Edwards, D J; Rillie, I; Chileshe, N; Lai, J; Hosseini, M R and Thwala, W D (2020) A field survey of hand-arm vibration exposure in the UK utilities sector. Engineering, Construction and Architectural Management, 27(9), pp. 2179-2198. ISSN 0969-9988

Elbashbishy, T and El-Adaway, I H (2026) Assessing the criticality of construction trades: Skilled labor shortages and their cost and schedule impacts. Journal of Construction Engineering and Management, 152(1): 04025230, ISSN 0733-9364

Everett, J G (1999) Overexertion injuries in construction. Journal of Construction Engineering and Management, 125(2), pp. 109-114. ISSN 0733-9364

Eyre, N; Fawcett, T; Topouzi, M; Killip, G; Oreszczyn, T; Jenkinson, K and Rosenow, J (2023) Fabric first: Is it still the right approach? Buildings & Cities, 4(1), pp. 965-972. ISSN 2632-6655

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Faris, E; Matarneh, S; Talebi, S; Kagioglou, M; Hosseini, M R and Abrishami, S (2021) Toward digitalization in the construction industry with immersive and drones technologies: A critical literature review. Smart and Sustainable Built Environment, 10(3), pp. 345-363. ISSN 2046-6099

Farnham, C; Emura, K and Mizuno, T (2015) Evaluation of cooling effects: Outdoor water mist fan. Building Research & Information, 43(3), pp. 334-345. ISSN 0961-3218

Fatayer, F A; Hassanain, M A; Abdallah, A and Al-Hammad, A M (2019) Investigation of facilities management practices for providing feedback during the design development and review stages. International Journal of Building Pathology and Adaptation, 37(5), pp. 597-614. ISSN 23984708

Feng, H; Song, Q; Yin, C and Cao, D (2022) Adaptive impedance control method for dynamic contact force tracking of robotic excavators. Journal of Construction Engineering and Management, 148(11): 04022124, ISSN 0733-9364

Fifield, L-J (2017) Monitoring UK hospital building type performance. PhD thesis, Loughborough University, UK.

Firth, S K; Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(1), pp. 25-41. ISSN 0961-3218

Forman, T (2015) Practice, policy and professional roles: unintended consequences and performance gaps in UK domestic solid wall insulation retrofit projects. PhD thesis, Cardiff University, UK.

Foruzanmehr, A and Vellinga, M (2011) Vernacular architecture: Questions of comfort and practicability. Building Research & Information, 39(3), pp. 274-285. ISSN 0961-3218

Frei, M (2021) Data-driven building retrofit using a wireless sensor network. DSc thesis, ETH Zürich, Switzerland.

Fuentes-Del-Burgo, J and Navarro-Astor, E (2016) What is engineering education for? Listening to the voices of some Spanish building engineers. Journal of Engineering, Design and Technology, 14(4), pp. 897-919.

Fuentes-del-Burgo J, N-A E (2013) Do educational mismatches influence job satisfaction? In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Fuyama, H (1993) Computer assisted conceptual structural design of steel buildings. PhD thesis, Stanford University, USA.

Galvin, R (2015) Integrating the rebound effect: Accurate predictors for upgrading domestic heating. Building Research & Information, 43(6), pp. 710-722. ISSN 0961-3218

Gambatese, J A (2003) Controlled concrete demolition using expansive cracking agents. Journal of Construction Engineering and Management, 129(1), pp. 98-104. ISSN 0733-9364

Garg, H C (2012) Theoretical modeling of orifice compensated symmetric hole-entry hybrid journal bearings. Journal of Engineering, Design and Technology, 10(3), pp. 421-435. ISSN 1726-0531

Geekiyanage, D; Ramachandra, T and Rotimi, J O B (2017) A morphology-based model for forecasting cooling energy demand of condominium buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ghansah, F A and Lu, W (2025) Cyber-physical systems and digital twins for "cognitive building" in the construction industry. Construction Innovation, 25(3), pp. 787-818. ISSN 1471-4175

Ghosh, A; Edwards, D J; Hosseini, M R; Al-Ameri, R; Abawajy, J and Thwala, W D (2021) Real-time structural health monitoring for concrete beams: A cost-effective 'industry 4.0' solution using piezo sensors. International Journal of Building Pathology and Adaptation, 39(2), pp. 283-311. ISSN 23984708

Glad, W (2012) Housing renovation and energy systems: The need for social learning. Building Research & Information, 40(3), pp. 274-289. ISSN 0961-3218

Gleeson, C P (2016) Residential heat pump installations: The role of vocational education and training. Building Research & Information, 44(4), pp. 394-406. ISSN 0961-3218

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Gordo-Gregorio, P; Alavi, H; Edwards, D J; Forcada, N and Guéna, F (2026) An occupant-centric approach on digital twins for building management. Building Research & Information, 54(1), pp. 59-78. ISSN 0961-3218

Gram-Hanssen, K (2010) Residential heat comfort practices: Understanding users. Building Research & Information, 38(2), pp. 175-186. ISSN 0961-3218

Gram-Hanssen, K; Heidenstrøm, N; Vittersø, G; Madsen, L V and Jacobsen, M H (2017) Selling and installing heat pumps: Influencing household practices. Building Research & Information, 45(4), pp. 359-370. ISSN 0961-3218

Grassie, D; Schwartz, Y; Symonds, P; Korolija, I; Mavrogianni, A and Mumovic, D (2022) Energy retrofit and passive cooling: Overheating and air quality in primary schools. Buildings & Cities, 3(1), pp. 204-225. ISSN 2632-6655

Gudem, M; Steinert, M; Welo, T and Leifer, L (2013) Redefining customer value in lean product development design projects. Journal of Engineering, Design and Technology, 11(1), pp. 71-89. ISSN 1726-0531

Guerra-Santin, O and Itard, L (2010) Occupants' behaviour: Determinants and effects on residential heating consumption. Building Research & Information, 38(3), pp. 318-338. ISSN 0961-3218

Gunay, H B; Shen, W and Yang, C (2019) Text-mining building maintenance work orders for component fault frequency. Building Research & Information, 47(5), pp. 518-533. ISSN 0961-3218

Gurevich, U; Sacks, R and Shrestha, P (2017) BIM adoption by public facility agencies: Impacts on occupant value. Building Research & Information, 45(6), pp. 610-630. ISSN 0961-3218

Gurmu, A.; Galluzzo, A. and Kite, J. (2021) Modelling customers' perception of the quality of services provided by builders: A case of Victoria, Australia. Construction Economics and Building, 21(1), pp. 100-124. ISSN 2204-9029

Gurmu, A T (2026) Econometric analysis of macroeconomic factors influencing construction labour productivity at industry level: Evidence from Australia. Construction Management and Economics, 44(1), pp. 23-40. ISSN 0144-6193

Gurmu, A; Hosseini, M R; Arashpour, M and Lioeng, W (2025) Development of building defects dashboards and stochastic models for multi-storey buildings in Victoria, Australia. Construction Innovation, 25(2), pp. 594-619. ISSN 1471-4175

Görsch, C; Seppänen, O; Peltokorpi, A and Lavikka, R (2024) Unlocking productivity: Revealing waste and hidden disturbances impacting mep workers. Journal of Construction Engineering and Management, 150(9): 04024108, ISSN 0733-9364

Görsch, Christopher (2024) Learning to see flow: A worker-centric exploration towards task planning and control in construction. DSc thesis, Aalto University, Finland.

Habibi, S (2022) Role of BIM and energy simulation tools in designing zero-net energy homes. Construction Innovation, 22(1), pp. 101-119. ISSN 1471-4175

Hadizadeh-Bazaz, M.; Navarro, I. J. and Yepes, V. (2026) Smart integration of non-destructive damage detection and life-cycle assessment for sustainable maintenance of coastal bridges. Smart and Sustainable Built Environment, pp. 1-27. ISSN 2046-6099

Halliday, S; Beggs, C and Muneer, T (1999) Is solar air conditioning feasible? Building Research & Information, 27(3), pp. 149-164. ISSN 0961-3218

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hanmer, C; Few, J; Hollick, F; Elam, S and Oreszczyn, T (2026) Tracking energy signatures of British homes from 2020 to 2025. Buildings & Cities, 7(1), pp. 176-195. ISSN 2632-6655

Hanna, A S; Camlic, R; Peterson, P A and Lee, M J (2004) Cumulative effect of project changes for electrical and mechanical construction. Journal of Construction Engineering and Management, 130(6), pp. 762-771. ISSN 0733-9364

Hanna, A S; Chang, C K; Lackney, J A and Sullivan, K T (2007) Impact of overmanning on mechanical and sheet metal labor productivity. Journal of Construction Engineering and Management, 133(1), pp. 22-28. ISSN 0733-9364

Hanna, A S; Russell, J S and Vandenberg, P J (1999) The impact of change orders on mechanical construction labour efficiency. Construction Management and Economics, 17(6), pp. 721-730. ISSN 01446193

Hansen, A R; Gram-Hanssen, K and Knudsen, H N (2018) How building design and technologies influence heat-related habits. Building Research & Information, 46(1), pp. 83-98. ISSN 0961-3218

Harran, M and Theunissen, H W (2019) Navigating the engineering literacy divide: design report collaboration practice realities. Journal of Engineering, Design and Technology, 17(1), pp. 77-101. ISSN 1726-0531

Hasan, A and Kamardeen, I (2022) Occupational health and safety barriers for gender diversity in the Australian construction industry. Journal of Construction Engineering and Management, 148(9): 04022100, ISSN 0733-9364

Hassanain, M A; Adewale, B; Al-Hammad, A-M and Sanni-Anibire, M O (2018) Factors affecting building services' coordination during the design development and review stages. Built Environment Project and Asset Management, 8(1), pp. 64-77. ISSN 2044-124X

Hassanain, M A; Aljuhani, M; Sanni-Anibire, M O and Abdallah, A (2019) Interdisciplinary design checklists for mechanical, electrical and plumbing coordination in building projects. Built Environment Project and Asset Management, 9(1), pp. 29-43. ISSN 2044-124X

Hassanain, M A; Bin-Mohanna, A; Al-Hammad, A-M and Sanni-Anibire, M O (2017) Challenges to the implementation of building management systems in Saudi Arabia. Built Environment Project and Asset Management, 7(2), pp. 130-142. ISSN 2044-124X

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2024) An assessment of users' satisfaction with a smart building on university campus through post-occupancy evaluation. Journal of Engineering, Design and Technology, 22(4), pp. 1119-1135. ISSN 1726-0531

He, Q and Ng, S T (2017) Energy-efficient window retrofit for existing high-rise residential buildings with the consideration of mutual shading. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Hedayati, M; Iyer-Raniga, U and Crossin, E (2014) A greenhouse gas assessment of a stadium in Australia. Building Research & Information, 42(5), pp. 602-615. ISSN 0961-3218

Hemalattha, S and Vidjeapriya, R (2021) Developing an integrated framework for optimization of spatial requirements of construction equipment. Built Environment Project and Asset Management, 11(5), pp. 903-917. ISSN 2044-124X

Henin, Eliya E A (2012) Efficient precast/prestressed floor system for building construction. PhD thesis, University of Nebraska - Lincoln, USA.

Heshmati, K; Shahabpoor, E; Walker, I; Ghanbari, S and Darby, A (2025) The effect of wind-induced vibrations in tall buildings on occupants' work performance. Building Research & Information, 53(8), pp. 949-964. ISSN 0961-3218

Hochstatter, Kirk (2025) Collaborative project delivery governance and shared leadership in AEC building virtual teams. PhD thesis, University of Washington, USA.

Hofmann, Giane Alfenas Antunes (2019) Parameters for the prevention of pathologies in steel-structured buildings. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Hollick, F; Humphrey, D; Oreszczyn, T; Elwell, C and Huebner, G (2024) Building energy use in COVID-19 lockdowns: Did much change? Buildings & Cities, 5(1), pp. 182-198. ISSN 2632-6655

Hossain, Y (2017) Energy-efficient homes in Alaska: Historical and contemporary perspectives on adaptation and innovation. PhD thesis, University of Alaska Fairbanks, USA.

Hosseini, M R; Jupp, J; Papadonikolaki, E; Mumford, T; Joske, W and Nikmehr, B (2021) Position paper: Digital engineering and building information modelling in Australia. Smart and Sustainable Built Environment, 10(3), pp. 331-344. ISSN 2046-6099

Hou, X; Zeng, Y and Xue, J (2020) Detecting structural components of building engineering based on deep-learning method. Journal of Construction Engineering and Management, 146(2): 04019097, ISSN 0733-9364

Hu, M (2020) Life-cycle environmental assessment of energy-retrofit strategies on a campus scale. Building Research & Information, 48(6), pp. 659-680. ISSN 0961-3218

Hu, M; Nippala, E; Kallioharju, K and Pelsmakers, S (2022) Monte Carlo simulation approach to understand the cost variance for energy retrofit projects: Comparative study of Finland and the United States. Construction Management and Economics, 40(3), pp. 207-222. ISSN 01446193

Hua, Y and Liu, A M M (2017) An investigation of person-culture fit and person-task fit on ICT adoption in the Hong Kong construction industry. Architectural Engineering and Design Management, 13(6), pp. 423-438. ISSN 1745-2007

Huang, J; Ji, A; Xiao, Z and Zhang, L (2025) Schedule-cost optimization in high-rise buildings considering uncertainty. Engineering, Construction and Architectural Management, 32(9), pp. 5657-5681. ISSN 0969-9988

Huang, W; Xu, J; Zhu, D; Liu, C; Lu, J and Lu, K (2016) Multi-objective optimization of composite two-stage vibration isolation system for sensitive equipment. Journal of Engineering, Design and Technology, 14(2), pp. 343-361.

Huebner, G M; McMichael, M; Shipworth, D; Shipworth, M; Durand-Daubin, M and Summerfield, A J (2015) The shape of warmth: Temperature profiles in living rooms. Building Research & Information, 43(2), pp. 185-196. ISSN 0961-3218

Hughes, J O; Pallin, S; Aldykiewicz, A J and Clark, C J (2021) Installation quality framework: Investment return approach for energy savings on building product installation. Journal of Construction Engineering and Management, 147(11): 04021158, ISSN 0733-9364

Hulathdoowage, N D and Hadiwattage, C (2022) Applicability of drywall technologies for disaster-induced housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 498-515. ISSN 1759-5916

Hulshizer, A J and Desai, A J (1984) Shock vibration effects on freshly placed concrete. Journal of Construction Engineering and Management, 110(2), pp. 266-285. ISSN 0733-9364

Ibrahim, K (2019) A framework for ethical sourcing of construction materials. PhD thesis, Nelson Mandela University, South Africa.

Ige, V O and Akinbogun, S P (2025) Consideration of senior citizens in private residential design in Sub-Saharan Africa: Reflections from akure, Nigeria. International Journal of Building Pathology and Adaptation, 43(2), pp. 197-208. ISSN 2398-4708

Imran, S A; Commuri, S; Barman, M; Zaman, M and Beainy, F (2017) Modeling the dynamics of asphalt-roller interaction during compaction. Journal of Construction Engineering and Management, 143(7): 04017015, ISSN 0733-9364

Infante-Perea, M; Román-Onsalo, M and Navarro-Astor, E (2025) Occupational alternatives in Spanish building engineering: A gender perspective. Journal of Engineering, Design and Technology, 23(6), pp. 2005-2022. ISSN 1726-0531

Inyang, N; Al-Hussein, M; El-Rich, M and Al-Jibouri, S (2012) Ergonomic analysis and the need for its integration for planning and assessing construction tasks. Journal of Construction Engineering and Management, 138(12), pp. 1370-1376. ISSN 0733-9364

Ip, K; Miller, A and Ellis, J (2003) Criteria and measurement of indoor air quality in sustainable buildings. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Isaacs, N; Saville-Smith, K; Camilleri, M and Burrough, L (2010) Energy in New Zealand houses: Comfort, physics and consumption. Building Research & Information, 38(5), pp. 470-480. ISSN 0961-3218

Jacob, J C; Pandit, D and Sen, J (2023) An explorative study on transient cooling pattern and energy efficiency while using micro-zonal occupant-centric control. Architectural Engineering and Design Management, 19(4), pp. 340-359. ISSN 1745-2007

Javed, S; Ørnes, I R; Myrup, M and Dokka, T H (2019) Design optimization of the borehole system for a plus-energy kindergarten in Oslo, Norway. Architectural Engineering and Design Management, 15(3), pp. 181-195. ISSN 1745-2007

Jegede, O E and Taki, A (2022) Optimization of building envelopes using indigenous materials to achieve thermal comfort and affordable housing in Abuja, Nigeria. International Journal of Building Pathology and Adaptation, 40(2), pp. 219-247. ISSN 23984708

Jelodar, M B; Wilkinson, S; Kalatehjari, R and Zou, Y (2022) Designing for construction procurement: An integrated decision support system for building information modelling. Built Environment Project and Asset Management, 12(1), pp. 111-127. ISSN 2044-124X

Jensen, J O and Gram-Hanssen, K (2008) Ecological modernization of sustainable buildings: A Danish perspective. Building Research & Information, 36(2), pp. 146-158. ISSN 0961-3218

Jeong, K S; Lu, S L and Sexton, M G (2010) Good practice transfer within small construction specialist trade contractors. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ji, Y; Lee, A and Swan, W (2019) Retrofit modelling of existing dwellings in the UK: The Salford energy house case study. International Journal of Building Pathology and Adaptation, 37(3), pp. 344-360. ISSN 23984708

Jimenez-Roa, Lisandro Arturo (2020) Data-driven damage detection for bridges through vibration structural health monitoring. EngD thesis, University of Twente, Netherlands.

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Jirandeh, R R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: a novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Josephson, P E and Bjorkman, L (2013) Why do work sampling studies in construction? The case of plumbing work in Scandinavia. Engineering, Construction and Architectural Management, 20(6), pp. 589-603. ISSN 0969-9988

Kangari, R; Farid, F and Elgharib, H M (1992) Financial performance analysis for construction industry. Journal of Construction Engineering and Management, 118(2), pp. 349-361. ISSN 0733-9364

Karshenas, S (1981) Probabilistic evaluation of safety of buildings during construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kashiwagi, D T and Mayo, R E (2001) Best value procurement in construction using artificial intelligence. Journal of Construction Procurement, 7(2), pp. 42-59. ISSN 1358-9180

Katoch, V and Mohan, S (2019) Design and fabrication of a safety frame for workers carrying out head lifting at construction sites. Journal of Engineering, Design and Technology, 17(6), pp. 1250-1265. ISSN 1726-0531

Khalid, A G (1992) Hedonic price estimation of the financial impact of obsolescence on commercial property buildings. PhD thesis, University of Reading, UK.

Khanzode, A R (2011) An integrated virtual design and construction and lean (IVL) method for coordination of mechanical, electrical and plumbing (MEP) systems. PhD thesis, Stanford University, USA.

Kilpeläinen, S; Pelsmakers, S; Castaño-Rosa, R and Miettinen, M S (2025) Exploring diverse drivers behind hybrid heating solutions. Buildings & Cities, 6(1), pp. 580-596. ISSN 2632-6655

Kim, K; Jeong, I and Cho, Y K (2023) Signal processing and alert logic evaluation for IoT-based work zone proximity safety system. Journal of Construction Engineering and Management, 149(2): 05022018, ISSN 0733-9364

Kisilewicz, T (2007) Computer simulation in solar architecture design. Architectural Engineering and Design Management, 3(2), pp. 106-123. ISSN 1745-2007

Koch, C and Beemsterboer, S (2017) Making an engine: Performativities of building information standards. Building Research & Information, 45(6), pp. 596-609. ISSN 0961-3218

Komarek, R L D (2020) Exploration and assessment of leadership development in engineering students. PhD thesis, University of Colorado at Boulder, USA.

Konon, W and Schuring, J R (1985) Vibration criteria for historic buildings. Journal of Construction Engineering and Management, 111(3), pp. 208-215. ISSN 0733-9364

Korman, T M; Fischer, M A and Tatum, C B (2003) Knowledge and reasoning for MEP coordination. Journal of Construction Engineering and Management, 129(6), pp. 627-634. ISSN 0733-9364

Krishnaraj, L; Kumar, V R P; Balasubramanian, M; Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(1), pp. 31-40. ISSN 1562-3599

Kulmedov, B and Durdyev, S (2023) Cost and environmental performance of forced air and hot water heating systems in post-soviet countries. International Journal of Building Pathology and Adaptation, 41(1), pp. 170-181. ISSN 23984708

Kululanga, G K; Edum-Fotwe, F T; McCaffer, R and Price, A D F (1997) Learning techniques employed by construction contractors' organisations. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Kululanga, G K; Edum-Fotwe, F T; McCaffer, R and Price, A D F (1998) Learning mechanisms for addressing improvement in construction companies. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Kumar, S (2016) Assessment and selection of psychological attributes: Design team perspectives. Journal of Engineering, Design and Technology, 14(4), pp. 874-896.

Kumara, W H C D; Waidyasekara, K G A S and Weerasinghe, R P N P (2016) Building management system for sustainable built environment in Sri Lanka. Built Environment Project and Asset Management, 6(3), pp. 302-316. ISSN 2044-124X

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Lam, K C; Runeson, G; Ng, S T; Hu, T S; Cheung, S O and Deng, Z M (2001) Capital budget planning practices of building contractors in Hong Kong. Construction Management and Economics, 19(6), pp. 569-576. ISSN 01446193

Lamb, S and Kwok, K C S (2017) Sopite syndrome in wind-excited buildings: Productivity and wellbeing impacts. Building Research & Information, 45(3), pp. 347-358. ISSN 0961-3218

Landin, A M and Persson, M H (1998) Evaluation of quality systems for specialist contractors. Engineering, Construction and Architectural Management, 5(3), pp. 210-219. ISSN 0969-9988

Lavikka, R; Chauhan, K; Peltokorpi, A and Seppänen, O (2021) Value creation and capture in systemic innovation implementation: Case of mechanical, electrical and plumbing prefabrication in the Finnish construction sector. Construction Innovation, 21(4), pp. 837-856. ISSN 1471-4175

Lavy, S; Kiss, C W and Fernandez-Solis, J L (2015) Linking design and energy performance in U.S. Military hospitals. Architectural Engineering and Design Management, 11(1), pp. 41-64. ISSN 1745-2007

Lee, S; Tae, S; Jee, N and Shin, S (2015) LDA-based model for measuring impact of change orders in apartment projects and its application for prerisk assessment and postevaluation. Journal of Construction Engineering and Management, 141(7): 4015011, ISSN 0733-9364

Lee, S H (2009) Computational fieldwork support for efficient operation and maintenance of mechanical, electrical and plumbing systems. PhD thesis, Carnegie Mellon University, USA.

Lee, S-H (2012) Management of building energy consumption and energy supply network on campus scale. PhD thesis, Georgia Institute of Technology, USA.

Li, H X; Nair, S; Li, Y; Yahaya, A; Timms, W and Owolabi, A B (2026) Evaluating energy performance of educational buildings: A case study in Australia. Engineering, Construction and Architectural Management, 33(15), pp. 137-158. ISSN 0969-9988

Li, J.; Chen, Z.; Li, Z.; Kong, L. and Zhang, H. (2026) Integrating computer vision and audio signals for concrete vibration activity recognition and assessment. Journal of Construction Engineering and Management, 152(7): 04026099, ISSN 0733-9364

Li, F G N; Smith, A Z P; Biddulph, P; Hamilton, I G; Lowe, R; Mavrogianni, A; Oikonomou, E; Raslan, R; Stamp, S; Stone, A; Summerfield, A J; Veitch, D; Gori, V and Oreszczyn, T (2015) Solid-wall U-values: Heat flux measurements compared with standard assumptions. Building Research & Information, 43(2), pp. 238-252. ISSN 0961-3218

Li, Shuyang (2020) Proactive design approaches for energy-efficient buildings. PhD thesis, University of California, USA.

Li, Z; Zhang, Q; Fan, F and Shen, S (2020) Analysis of dynamic properties and vibration comfort of large-scale stands. Building Research & Information, 48(7), pp. 802-816. ISSN 0961-3218

Liu, D; Sun, J; Zhong, D and Song, L (2012) Compaction quality control of earth-rock dam construction using real-time field operation data. Journal of Construction Engineering and Management, 138(9), pp. 1085-1094. ISSN 0733-9364

Liu, H; Zhang, F; Ma, R; Wang, L; Chen, Z; Zhang, Q and Guo, L (2024) Intelligent noncontact structural displacement detection method based on computer vision and deep learning. Journal of Construction Engineering and Management, 150(10): 04024127, ISSN 0733-9364

Liu, M (2013) The application of BIM and IPD in public design and construction. PhD thesis, Polytechnic Institute of New York University, USA.

Lizana, J; Miranda, N D; Gross, L; Mazzone, A; Cohen, F; Palafox-Alcantar, G; Fahr, P; Jani, A; Renaldi, R; McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings & Cities, 3(1), pp. 1075-1097. ISSN 2632-6655

Lomas, K J; Cook, M J and Short, C A (2009) Commissioning hybrid advanced naturally ventilated buildings: A US case study. Building Research & Information, 37(4), pp. 397-412. ISSN 0961-3218

Luo, M; Zhang, H; Wang, Z; Arens, E; Chen, W; Bauman, F S and Raftery, P (2021) Ceiling-fan-integrated air-conditioning: Thermal comfort evaluations. Buildings & Cities, 2(1), pp. 928-951. ISSN 2632-6655

Luo, Y (2008) Decision support for prefabrication strategy selection on building systems. PhD thesis, Pennsylvania State University, USA.

Lv, Y; Feng, J; Wang, G and Li, H (2024) Stability characteristics and experiment of hydraulic drive four-wheel chassis. Journal of Engineering, Design and Technology, 22(2), pp. 598-612. ISSN 1726-0531

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: Lessons from a PoE case study. Building Research & Information, 33(1), pp. 17-31. ISSN 0961-3218

Macpherson, S J; Kelly, J R and Webb, R S (1993) How designs develop: Insights from case studies in building engineering services. Construction Management and Economics, 11(6), pp. 475-485. ISSN 01446193

Madsen, L V (2018) Materialities shape practices and notions of comfort in everyday life. Building Research & Information, 46(1), pp. 71-82. ISSN 0961-3218

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Mahamadu, A-M; Mahdjoubi, L and Booth, C A (2017) Critical BIM qualification criteria for construction pre-qualification and selection. Architectural Engineering and Design Management, 13(5), pp. 326-343. ISSN 1745-2007

Mahamedi, E; Wonders, M; Gerami Seresht, N; Woo, W L and Kassem, M (2024) A reinforcing transfer learning approach to predict buildings energy performance. Construction Innovation, 24(1), pp. 242-255. ISSN 1471-4175

Mane, K M; Kulkarni, D K and Prakash, K B (2021) Prediction of shear strength of concrete produced by using pozzolanic materials and partly replacing nfa by MS using ann. Journal of Engineering, Design and Technology, 19(2), pp. 578-587. ISSN 1726-0531

Martins, R S; Siqueira de Aquino, G; Coelho Pagel, É and Gouveia, G L O D (2025) Realistic designs of windows and doors as solutions to improve natural ventilation in hot-humid climates: A factorial design approach. Architectural Engineering and Design Management, 21(2), pp. 268-288. ISSN 1745-2007

Marzouk, M and Zaher, M (2020) Artificial intelligence exploitation in facility management using deep learning. Construction Innovation, 20(4), pp. 609-624. ISSN 1471-4175

Masih, S and Kar, S (2025) Assessing social sustainability for multimodal activities in construction: An FAHP-TOPSIS approach. Journal of Construction Engineering and Management, 151(12): 04025210, ISSN 0733-9364

Masitenyane, L A (2020) Dimensions and outcomes of buyer-seller relationship intentions for concrete products in the construction environment. DTech thesis, Vaal University of Technology, South Africa.

Mavrogianni, A; Davies, M; Chalabi, Z; Wilkinson, P; Kolokotroni, M and Milner, J (2009) Space heating demand and heatwave vulnerability: London domestic stock. Building Research & Information, 37(5-6), pp. 583-597. ISSN 0961-3218

Mazlan, E M; Osman, M H and Saud, M S (2019) The level of competency knowledge in safety training among construction personnel. Journal of Construction in Developing Countries, 24(2), pp. 157-172. ISSN 1823-6499

McElroy, D J and Rosenow, J (2019) Policy implications for the performance gap of low-carbon building technologies. Building Research & Information, 47(5), pp. 611-623. ISSN 0961-3218

McEvoy, M and Southall, R (2010) A programme of testing to evaluate a passive approach to whole-house ventilation. Construction Innovation, 10(4), pp. 395-407. ISSN 1471-4175

McGill, G; Oyedele, L O and McAllister, K (2015) An investigation of indoor air quality, thermal comfort and sick building syndrome symptoms in UK energy efficient homes. Smart and Sustainable Built Environment, 4(3), pp. 329-348. ISSN 2046-6099

McKay, L J (2010) The effect of offsite construction on occupational health and safety. PhD thesis, Loughborough University, UK.

McMahon, E; Spillane, J P and Bradley, J G (2023) When enough is not enough! Evaluating the minimum entry requirements for apprenticeships in Ireland. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

McMahon, E; Spillane, J P and Bradley, J G (2024) Insights into apprenticeship completion: Perspectives from apprentice experiences. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Meinke, A; Hawighorst, M; Wagner, A; Trojan, J and Schweiker, M (2017) Comfort-related feedforward information: Occupants' choice of cooling strategy and perceived comfort. Building Research & Information, 45(1-2), pp. 222-238. ISSN 0961-3218

Meng, Q and Zhu, S (2022) Construction activity classification based on vibration monitoring data: A supervised deep-learning approach with time series randaugment. Journal of Construction Engineering and Management, 148(9): 04022090, ISSN 0733-9364

Mesa Jiménez, J J (2021) Artificial intelligence for optimisation and demand side response in built environment. PhD thesis, Brunel University, UK.

Miles-Shenton, D; Parker, J; Glew, D and Thomas, F (2025) Quantifying inter-dwelling air exchanges during fan pressurisation tests. Buildings & Cities, 6(1), pp. 239-254. ISSN 2632-6655

Minchin, R E and Thomas, H R (2003) Validation of vibration-based onboard asphalt density measuring system. Journal of Construction Engineering and Management, 129(1), pp. 1-7. ISSN 0733-9364

Mlecnik, E (2013) Improving passive house certification: Recommendations based on end-user experiences. Architectural Engineering and Design Management, 9(4), pp. 250-264. ISSN 1745-2007

Moaveni, B (2007) System and damage identification of civil structures. PhD thesis, University of California, San Diego, USA.

Mohseni, Mehdi (2012) Dynamic vulnerability assessment of highway and railway bridges. PhD thesis, University of Nebraska - Lincoln, USA.

Montalbán-Domingo, L; Torres-Machi, C; Sanz-Benlloch, A; Pellicer, E and Molenaar, K R (2023) Green public procurement in civil infrastructure construction: Current performance and main project characteristics. Journal of Construction Engineering and Management, 149(9): 04023089, ISSN 0733-9364

Moradipour, P; Noorzaei, J; Jaafar, M S and Aziz, F N A A (2013) An improved computational method in structural dynamics. Journal of Engineering, Design and Technology, 11(3), pp. 288-315. ISSN 1726-0531

Morgenstern, P; Lowe, R and Chiu, L F (2015) Heat metering: Socio-technical challenges in district-heated social housing. Building Research & Information, 43(2), pp. 197-209. ISSN 0961-3218

Morley, J (2026) Energy sufficiency, space temperature and public policy. Buildings & Cities, 7(1), pp. 110-125. ISSN 2632-6655

Msomi, V and Oliver, G J (2016) Smart morphing based on shape memory alloy plate. Journal of Engineering, Design and Technology, 14(3), pp. 475-488.

Muga, H E (2009) An integrated framework for assessing the sustainability of components that make up the built environment. PhD thesis, Michigan Technological University, USA.

Mwemezi, B R; Kikwasi, G J and Phoya, S (2024) Perception of masonry workers on health and safety risks in informal construction sites in Dar es Salaam, Tanzania. International Journal of Construction Management, 24(12), pp. 1305-1313. ISSN 1562-3599

Nair, S G; Nguyen, Q D; Zhu, Q; Karimi, M; Gan, Y; Wang, X; Castel, A; Irga, P; da Rocha, C G d; Torpy, F; Wilkinson, S; Moreau, D and Delhomme, F (2025) Suitability of calcined clay and ground granulated blast furnace slag geopolymer binder for hempcrete applications. Built Environment Project and Asset Management, 15(5), pp. 924-936. ISSN 2044-124X

Navabian, N (2020) Development of an automated structural health monitoring system based on wireless sensor network for civil structures. PhD thesis, Auckland University of Technology, New Zealand.

Navon, R and Arkin, H (1993) Economic comparison of an air-conditioner and a desert cooler for residences in arid areas. Construction Management and Economics, 11(1), pp. 62-70. ISSN 01446193

New, K; Tyler, A; Friday, A; Hazas, M and Gormally, A (2023) Space temperature policy towards net-zero: Recommendations from a systematic review of UK HEI heating policies. Building Research & Information, 51(2), pp. 223-239. ISSN 0961-3218

Newton, P W and Tucker, S N (2011) Pathways to decarbonizing the housing sector: A scenario analysis. Building Research & Information, 39(1), pp. 34-50. ISSN 0961-3218

Nguyen, T D H N; Park, S; Jeong, J and Ahn, Y (2026) Post occupancy evaluation of the relocatable modular construction method for temporary educational facilities. Engineering, Construction and Architectural Management, 33(1), pp. 785-809. ISSN 0969-9988

Nicol, F (2017) Temperature and adaptive comfort in heated, cooled and free-running dwellings. Building Research & Information, 45(7), pp. 730-744. ISSN 0961-3218

Nikoopayan Tak, M S; Bhattacharya, A; Metcalf, A R and Mousavi, E (2023) Cleanroom air quality: Combined effects of ventilation rate and filtration schemes in a laboratory cleanroom. Building Research & Information, 51(6), pp. 717-729. ISSN 0961-3218

Nilsson, S (2003) Durability of district heating pipes. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Nuhu, B K; Aliyu, I; Adegboye, M A; Ryu, J K; Olaniyi, O M and Lim, C G (2021) Distributed network-based structural health monitoring expert system. Building Research & Information, 49(1), pp. 144-159. ISSN 0961-3218

Nuorivaara, E and Ahvenharju, S (2025) Acceptability of sufficiency consumption policies by Finnish households. Buildings & Cities, 6(1), pp. 121-138. ISSN 2632-6655

Nyateka, N (2017) An evaluation of the role and effectiveness of simulation-based learning in the occupational health training of construction apprentices. PhD thesis, Loughborough University, UK.

O'Neill, T; McMahon, E; Spillane, J P and Bradley, J G (2023) Conflict as a contributory factor in built environment: Apprenticeship completion in the Republic of Ireland. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

O'Sullivan, D T J (2005) Improving building performance by tracking performance metrics using an IFC data model. PhD thesis, University College Cork, Ireland.

Ogden, R G; Kendrick, C C and Walliman, N S R (2004) Modelling of enhanced passive and conventional cooling systems. Building Research & Information, 32(1), pp. 17-26. ISSN 0961-3218

Oke, A E; Aliu, J; Oni, S B and Ilesanmi, O O (2025) The complexities of embracing mechatronics in the Nigerian construction industry. Construction Innovation, 25(4), pp. 1188-1209. ISSN 1471-4175

Oke, A E and Arowoiya, V A (2021) Evaluation of internet of things (IoT) application areas for sustainable construction. Smart and Sustainable Built Environment, 10(3), pp. 387-402. ISSN 2046-6099

Okoye, P U (2018) Occupational health and safety risk levels of building construction trades in Nigeria. Construction Economics and Building, 18(2), pp. 92-109. ISSN 2204-9029

Olugboyega, O; Edwards, D J; Windapo, A O; Omopariola, E D and Martek, I (2021) Development of a conceptual model for evaluating the success of BIM-based construction projects. Smart and Sustainable Built Environment, 10(4), pp. 681-701. ISSN 2046-6099

Oluwole, A O; Jane Jia Suen, L; Heap-Yih, C and Akanmu, A A (2021) Building information modelling penetration in quantity surveying practice. Built Environment Project and Asset Management, 11(5), pp. 888-902. ISSN 2044-124X

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(2), pp. 198-212.

Ou, J; Chen, Z; Long, W; Chen, D and Zhang, Y (2024) Vibrational performance of wood floors in traditional residential timber structures in southwest China. Architectural Engineering and Design Management, 20(6), pp. 1529-1542. ISSN 1745-2007

Oyeyipo, O; Adeyemi, B; Osuizugbo, I and Ojelabi, R (2022) Service quality of building services consultants in building project delivery; clients' perspectives. International Journal of Construction Management, 22(15), pp. 2886-2894. ISSN 1562-3599

Papadonikolaki, E and Wamelink, H (2017) Inter- and intra-organizational conditions for supply chain integration with BIM. Building Research & Information, 45(6), pp. 649-664. ISSN 0961-3218

Park, J H and Lee, G (2017) Design coordination strategies in a 2D and BIM mixed-project environment: Social dynamics and productivity. Building Research & Information, 45(6), pp. 631-648. ISSN 0961-3218

Patil, S; Goudar, M and Kharadkar, R (2022) Neural network-based estimation of lighting condition in indoor environment with improved brain storm algorithm. Journal of Engineering, Design and Technology, 20(6), pp. 1565-1580. ISSN 1726-0531

Pavlovas, V (2006) Energy savings in existing Swedish apartment buildings: Some aspects on demand controlled ventilation and individual metering. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Pearson, A D (2014) An investigation of climatically responsive ultra-low energy housing in rural Scotland: a case study. PhD thesis, University of Dundee, UK.

Perera, U T G; Haigh, R and Amaratunga, D (2023) Incorporating public health impacts in the impact assessment process during road projects: Weaknesses and challenges. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Phythian, G J (1991) Applications of knowledge-based expert systems in recurrent competitive bidding. PhD thesis, Loughborough University, UK.

Piroozfar, P; Pomponi, F and Farr, E R P (2016) Life cycle assessment of domestic hot water systems: A comparative analysis. International Journal of Construction Management, 16(2), pp. 109-125. ISSN 1562-3599

Poirier, E A; Forgues, D and Staub-French, S (2017) Understanding the impact of BIM on collaboration: A Canadian case study. Building Research & Information, 45(6), pp. 681-695. ISSN 0961-3218

Polson, D R (2020) Assessment of applications of optimisation to building design and energy modelling. PhD thesis, University of London, University College London, UK.

Porritt, S M; Cropper, P C; Shao, L and Goodier, C I (2013) Heat wave adaptations for UK dwellings and development of a retrofit toolkit. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 269-286. ISSN 1759-5916

Ramaji, I J and Memari, A M (2018) Extending the current model view definition standards to support multi-storey modular building projects. Architectural Engineering and Design Management, 14(1-2), pp. 158-176. ISSN 1745-2007

Ramantswana, T.; Awuzie, B.; Mompati, L. and Khafiso, T. (2026) Embedding ESG in facility management practices: A South African corporate real estate perspective. International Journal of Building Pathology and Adaptation, 44(5), pp. 1246-1266. ISSN 2398-4708

Ramezanpour Jirandeh, R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: A novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Ready to deleteÓ Broin, E (2016) Modelling drivers of energy demand in the European union building sector. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Revell, K M A and Stanton, N A (2018) Mental model interface design: Putting users in control of home heating. Building Research & Information, 46(3), pp. 251-271. ISSN 0961-3218

Riley, D R; Diller, B E and Kerr, D (2005) Effects of delivery systems on change order size and frequency in mechanical construction. Journal of Construction Engineering and Management, 131(9), pp. 953-962. ISSN 0733-9364

Riley, D R; Varadan, P; James, J S and Thomas, H R (2005) Benefit-cost metrics for design coordination of mechanical, electrical, and plumbing systems in multistory buildings. Journal of Construction Engineering and Management, 131(8), pp. 877-889. ISSN 0733-9364

Rinkinen, J and Jalas, M (2017) Moving home: Houses, new occupants and the formation of heating practices. Building Research & Information, 45(3), pp. 293-302. ISSN 0961-3218

Ritter, V (2012) Optimizing the combination of active and passive building components in refurbishment projects to allow for net-zero emission architecture. DSc thesis, ETH Zürich, Switzerland.

Rogage, K; Clear, A; Alwan, Z; Lawrence, T and Kelly, G (2020) Assessing building performance in residential buildings using BIM and sensor data. International Journal of Building Pathology and Adaptation, 38(1), pp. 176-191. ISSN 23984708

Rwamamara, R and Simonsson, P (2009) Health and safety in concrete casting processes. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Rwamamara, R A (2007) Planning the healthy construction workplace through risk assessment and design methods. PhD thesis, Luleå University of Technology, Sweden.

Saade, M R M; da Silva, M G; Gomes, V; Franco, H G; Schwamback, D and Lavor, B (2014) Material eco-efficiency indicators for Brazilian buildings. Smart and Sustainable Built Environment, 3(1), pp. 54-71. ISSN 2046-6099

Safikhani, S.; Shafaat, A. and Sartipipour, M. (2026) Automated project rescheduling with preemptive activity splitting for baseline restoration. Journal of Construction Engineering and Management, 152(6): 04026065, ISSN 0733-9364

Sahu, V; Attri, R; Gupta, P and Yadav, R (2020) Development of eco friendly brick using water treatment plant sludge and processed tea waste. Journal of Engineering, Design and Technology, 18(3), pp. 727-738. ISSN 1726-0531

Sajadfar, Narges (2022) Application of machine learning to automate classification and information extraction in industrial construction documents. PhD thesis, University of Alberta, Canada.

Sandberg, N H and Bratteb, H (2012) Analysis of energy and carbon flows in the future Norwegian dwelling stock. Building Research & Information, 40(2), pp. 123-139. ISSN 0961-3218

Sanni-Anibire, M O and Hassanain, M A (2016) Quality assessment of student housing facilities through post-occupancy evaluation. Architectural Engineering and Design Management, 12(5), pp. 367-380. ISSN 1745-2007

Sborz, J; Kalbusch, A and Henning, E (2024) Factors that determine hot and cold-water consumption in social housing apartments. Architectural Engineering and Design Management, 20(6), pp. 1669-1686. ISSN 1745-2007

Schade, J (2013) A design process perspective on the energy performance of buildings. PhD thesis, Luleå University of Technology, Sweden.

Schellen, L; Loomans, M; De Wit, M and Van Marken Lichtenbelt, W (2013) The influence of different cooling techniques and gender on thermal perception. Building Research & Information, 41(3), pp. 330-341. ISSN 0961-3218

Shamsollahi, D; Moselhi, O and Khorasani, K (2024) Automated detection and segmentation of mechanical, electrical, and plumbing components in indoor environments by using the yolact++ architecture. Journal of Construction Engineering and Management, 150(8): 04024100, ISSN 0733-9364

Shih, N J and Wang, P H (2004) Plumbing locator in an as-built building form. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Shipworth, M; Firth, S K; Gentry, M I; Wright, A J; Shipworth, D T and Lomas, K J (2010) Central heating thermostat settings and timing: Building demographics. Building Research & Information, 38(1), pp. 50-69. ISSN 0961-3218

Sica, G (2014) Groundborne vibrations caused by railway construction and operation in buildings: Design, implementation and analysis of measurement for assessment of human exposure. PhD thesis, University of Salford, UK.

Simpeh, F.; Appau, M. W. and Attakora-Amaniampong, E. (2026) Technological compliance and usefulness of heating and cooling systems in on-campus student housing in Ghana. Smart and Sustainable Built Environment, 15(3), pp. 1068-1084. ISSN 2046-6099

Singh, A. K.; Mohandes, S. R.; Awuzie, B. O.; Omotayo, T.; Kumar, V. R. P. and Kidd, C. (2026) A roadmap for overcoming barriers to implementation of blockchain-enabled smart contracts in sustainable construction projects. Smart and Sustainable Built Environment, 15(2), pp. 570-596. ISSN 2046-6099

Singh, H; Elghaish, F and Brooks, T (2023) Automated workflows for design coordination: Supporting MEP systems. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Singh, T; Kalra, M and Misra, A K (2020) Simplified probabilistic seismic assessment of dampers in tall and braced structures in buildings. Journal of Engineering, Design and Technology, 18(5), pp. 1037-1052. ISSN 1726-0531

Small, E P; Bakry, I and Ayyash, L (2021) Evaluating the effect of TQM on mep construction productivity and project delivery in Dubai. International Journal of Construction Management, 21(10), pp. 1061-1075. ISSN 1562-3599

Smallwood, J J and Haupt, T C (2009) Construction ergonomics: Perspectives of female and male production workers. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Smits, W; van Buiten, M and Hartmann, T (2017) Yield-to-BIM: Impacts of BIM maturity on project performance. Building Research & Information, 45(3), pp. 336-346. ISSN 0961-3218

Somani, N; Tyagi, Y K and Gupta, N K (2024) An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of cu-sic composites. Journal of Engineering, Design and Technology, 22(1), pp. 77-88. ISSN 1726-0531

Spence, A; Goulden, M; Leygue, C; Banks, N; Bedwell, B; Jewell, M; Yang, R and Ferguson, E (2018) Digital energy visualizations in the workplace: The e-genie tool. Building Research & Information, 46(3), pp. 272-283. ISSN 0961-3218

Stafford, A (2011) Long-term monitoring and performance of ground source heat pumps. Building Research & Information, 39(6), pp. 566-573. ISSN 0961-3218

Stoyell, J L (2004) Eco-design decision-making: towards sustainable engineering design of large made-to-order products. PhD thesis, University of Newcastle upon Tyne, UK.

Summa, S.; Mircoli, A.; Potena, D.; Ulpiani, G.; Diamantini, C. and Di Perna, C. (2022) Combining artificial intelligence and building engineering technologies towards energy efficiency: The case of ventilated façades. Construction Innovation, 24(7), pp. 44-64. ISSN 1471-4175

Sunikka, M (2006) Energy efficiency and low-carbon technologies in urban renewal. Building Research & Information, 34(6), pp. 521-533. ISSN 0961-3218

Sunikka-Blank, M; Galvin, R and Behar, C (2018) Harnessing social class, taste and gender for more effective policies. Building Research & Information, 46(1), pp. 114-126. ISSN 0961-3218

Suárez, J L; Gosselin, L and Lehoux, N (2023) Optimizing modularity of prefabricated residential plumbing systems for construction in remote communities. Journal of Construction Engineering and Management, 149(1): 05022017, ISSN 0733-9364

Sällström Eriksson, L and Lidelöw, S (2025) Maintaining or replacing a building's windows: A comparative life cycle study. International Journal of Building Pathology and Adaptation, 43(4), pp. 766-786. ISSN 2398-4708

Thomas, L; Woods, A; Powles, R; Kalali, P and Wilkinson, S (2022) Residential geothermal air-conditioning: Inhabitants' comfort, behaviour and energy use. Buildings & Cities, 3(1), pp. 226-249. ISSN 2632-6655

Toller, S; Carlsson, A; Wadeskog, A; Miliutenko, S and Finnveden, G (2013) Indicators for environmental monitoring of the Swedish building and real estate management sector. Building Research & Information, 41(2), pp. 146-155. ISSN 0961-3218

Traylor, C; Zhao, W and Tao, Y X (2019) Utilizing modulating-temperature setpoints to save energy and maintain alliesthesia-based comfort. Building Research & Information, 47(2), pp. 190-201. ISSN 0961-3218

Tripathi, P and Mittal, Y K (2025) Risk assessment and ranking methodology for occupational hazards in construction: A case of Indian high-rise projects. Smart and Sustainable Built Environment, 14(6), pp. 1927-1949. ISSN 2046-6099

Ulrich de Alencastro, J P (2019) The impact of quality management on the thermal performance of social housing in the United Kingdom. PhD thesis, University of Plymouth, UK.

Utkucu, D and Sözer, H (2025) Modeling a mixed-mode cooling system with correlation to operable building facade openings: Mathematical logic integration of computational fluid dynamics and energy models. Journal of Construction Engineering and Management, 151(6): 04025054, ISSN 0733-9364

Valkonen, T; Lindberg, A; Alhava, O; Talebi, S; Koskela, L and Seppänen, O (2026) Tolerance management in prefabrication of mechanical, electrical, and plumbing installations. Construction Management and Economics, 44(4), pp. 279-299. ISSN 0144-6193

Van Moeseke, G; De Grave, D; Anciaux, A; Sobczak, J and Wallenborn, G (2024) New insights into thermal comfort sufficiency in dwellings. Buildings & Cities, 5(1), pp. 331-348. ISSN 2632-6655

Vass, S and Karrbom Gustavsson, T (2017) Challenges when implementing BIM for industry change. Construction Management and Economics, 35(10), pp. 597-610. ISSN 0144-6193

Velasco, E and Segovia, E (2024) Effectiveness of equipping bus stop shelters with cooling and filtering systems in a city with tropical climate. Smart and Sustainable Built Environment, 13(5), pp. 1330-1345. ISSN 2046-6099

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Vitharana, V H P and Chinda, T (2021) Development of a lower back pain prevention index for heavy equipment operators in the construction industry: System dynamics modelling. International Journal of Construction Management, 21(7), pp. 677-693. ISSN 1562-3599

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Wade, F; Murtagh, N and Hitchings, R (2018) Managing professional jurisdiction and domestic energy use. Building Research & Information, 46(1), pp. 42-53. ISSN 0961-3218

Wade, F; Shipworth, M and Hitchings, R (2017) How installers select and explain domestic heating controls. Building Research & Information, 45(4), pp. 371-383. ISSN 0961-3218

Waibel, C (2018) Simulation-based optimization of buildings and multi-energy systems. DSc thesis, ETH Zürich, Switzerland.

Walker, G; Brown, S and Neven, L (2016) Thermal comfort in care homes: Vulnerability, responsibility and 'thermal care'. Building Research & Information, 44(2), pp. 135-146. ISSN 0961-3218

Wambeke, B W; Liu, M and Hsiang, S M (2012) Using last planner and a risk assessment matrix to reduce variation in mechanical related construction tasks. Journal of Construction Engineering and Management, 138(4), pp. 491-498. ISSN 0733-9364

Wang, L.; Yuan, J.; Su, S.; Weng, S. and Hu, F. (2026) Vision-based progress compliance and worker health monitoring in concrete pouring and vibration. Journal of Construction Engineering and Management, 152(10): 04026162, ISSN 0733-9364

Wang, J; Han, J; Chen, J; Ding, G; Feng, G; Liu, T and Guo, B (2022) Experimental and numerical study on the dynamic response of a superthick backfill subgrade under high-speed railway loading: A case study of qianjiang-zhangjiajie-changde railway. Journal of Construction Engineering and Management, 148(12): 05022014, ISSN 0733-9364

Wang, Li (2014) Knowledge formalization and reuse in BIM-based mechanical, electrical and plumbing design coordination in new construction projects using data mining techniques. PhD thesis, University of Texas at Austin, USA.

Wang, S; Zhu, S and Yuen, P L (2021) Assessment of ground-borne vibration impact on nearby underground facilities induced by ground surface excavation. Journal of Construction Engineering and Management, 147(7): 04021071, ISSN 0733-9364

Wang, X; Li, J; Wang, R; Zhang, J and Ma, G (2025) Automated evaluation and optimization of subgrade construction based on intelligent compaction. Journal of Construction Engineering and Management, 151(9): 04025127, ISSN 0733-9364

Wang, Y; Lin, M; Xu, K; Zhang, S and Ma, H (2021) Energy consumption analysis of glass house using electrochromic window in the subtropical region. Journal of Engineering, Design and Technology, 19(1), pp. 203-218. ISSN 1726-0531

Wanigarathna, N (2014) Evidence-based design for healthcare buildings in England and wales. PhD thesis, Loughborough University, UK.

Waziri, N H; Usman, A M and Enaburekhan, J S (2015) Optimum temperature and solar radiation periods for kano using flat plate collector. Journal of Engineering, Design and Technology, 13(4), pp. 570-578.

Wenninger, S (2022) Data-driven support and risk modeling for a successful heat transition in the building sector. PhD thesis, Universitaet Bayreuth, Germany.

Wiethe, C (2022) Applying artificial intelligence and quantitative finance for a successful heat transition in the building sector. PhD thesis, Universitaet Bayreuth, Germany.

Windapo, A; Moghayedi, A; Oliphant, D and Adediran, A (2018) Exploring the components of cost on construction projects. Journal of Construction Business and Management, 2(2), pp. 42-50. ISSN 2521-0165

Windapo, A O and Moghayedi, A (2020) Adoption of smart technologies and circular economy performance of buildings. Built Environment Project and Asset Management, 10(4), pp. 585-601. ISSN 2044-124X

Xu, G (2011) Assessment of risk of disproportionate collapse of steel building structures exposed to multiple hazards. PhD thesis, Georgia Institute of Technology, USA.

Xuereb, K (2015) Future-proofing buildings: a novel approach to measure the performance of building structures. PhD thesis, University College London, UK.

Xuereb, K (2015) Future-proofing buildings: A novel approach to measure the performance of building structures. PhD thesis, University College London, UK.

Yadav, N; Sadeghi, N and Kang, J (2024) Five factors affecting the on-body placement of wearable tactile safety promotion device for construction workers-on-foot. Construction Innovation, 24(2), pp. 537-557. ISSN 1471-4175

Yamaguchi, K; Matsufuji, Y and Koyama, T (2007) A new structural system: Friction-resistant dry-masonry. Building Research & Information, 35(6), pp. 616-628. ISSN 0961-3218

Yan, L and Fu-Yan, L (2017) Investigation on influence of speed on rolling resistance of belt conveyor based on viscoelastic property of rubber. Journal of Engineering, Design and Technology, 15(2), pp. 254-267.

Yang, S; Guan, T; Wang, J; Wang, X and Ren, B (2025) Label scarcity- and class imbalance-aware current-based pipeline for concrete vibration activity recognition. Journal of Construction Engineering and Management, 151(10): 04025135, ISSN 0733-9364

Yu, Y (2022) Use inspired research in using virtual reality for safe operation of exemplar critical infrastructure systems. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zafaranchi, M and Sözer, H (2024) Comparing energy profiles of different building types by determining their sensitivities. Architectural Engineering and Design Management, 20(6), pp. 1489-1510. ISSN 1745-2007

Zaferanchi, M and Sozer, H (2024) Effectiveness of interventions to convert the energy consumption of an educational building to zero energy. International Journal of Building Pathology and Adaptation, 42(4), pp. 485-509. ISSN 23984708

Zhang, D and Ho, C H (2024) Distribution fitting and anova test to analyze pavement sensing patterns for condition assessments. Built Environment Project and Asset Management, 14(4), pp. 663-676. ISSN 2044-124X

Zhang, H; Arens, E and Pasut, W (2011) Air temperature thresholds for indoor comfort and perceived air quality. Building Research & Information, 39(2), pp. 134-144. ISSN 0961-3218

Zhang, N; Wang, J; Al-Hussein, M and Yin, X (2023) BIM-based automated design of drainage systems for panelized residential buildings. International Journal of Construction Management, 23(15), pp. 2683-2698. ISSN 1562-3599

Zhang, R; Xing, J; Ye, K; Lu, W and Shan, Y (2019) Synchronicity of global construction cost indexes. Engineering, Construction and Architectural Management, 26(3), pp. 367-385. ISSN 0969-9988

Zhuravchak, R; Nord, N and Brattebø, H (2022) The effect of building attributes on the energy performance at a scale: An inferential analysis. Building Research & Information, 50(6), pp. 662-680. ISSN 0961-3218

Zika-Viktorsson, A (2002) The industrial project. Studies of the work situation of project members. PhD thesis, KTH Royal Institute of Technology, Sweden.

Zubairu, S N (1998) Maintenance of government office buildings in Nigeria: A post-occupancy evaluation approach. PhD thesis, University of Lagos, Nigeria.

de Magalhães, F M R L (2010) Operational modal analysis for testing and monitoring of bridges and special structures. PhD thesis, Universidade do Porto, Portugal.

van den Brom, P; Meijer, A and Visscher, H (2018) Performance gaps in energy consumption: Household groups and building characteristics. Building Research & Information, 46(1), pp. 54-70. ISSN 0961-3218

van der Linden, K A C; Kurvers, S S R; Raue, A A K and Boerstra, A A C (2007) Indoor climate guidelines in the Netherlands: Developments towards adaptive thermal comfort. Construction Innovation, 7(1), pp. 72-84. ISSN 1471-4175

Çıdık, M S; Boyd, D and Thurairajah, N (2017) Ordering in disguise: Digital integration in built-environment practices. Building Research & Information, 45(6), pp. 665-680. ISSN 0961-3218