Items with Subject: material analysis and testing

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Abdelaal, A; Ma, J; Zhang, H; Shobeiri, V and Xie, Y M (2026) Bio-stabilized modular rammed earth blocks for sustainable and aesthetic construction. Construction Innovation, 26(9), pp. 1-20. ISSN 1471-4175

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO₂ emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abejide, O S (1997) Solid soilcrete blocks for low-cost buildings: A Nigerian case study. Building Research & Information, 25(2), pp. 115-119. ISSN 0961-3218

Aboshia, A M A; Rahmat, R A; Zain, M F M and Ismail, A (2017) Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. International Journal of Building Pathology and Adaptation, 35(5), pp. 438-455.

Abounia Omran, B (2016) Application of data mining and big data analytics in the construction industry. PhD thesis, Ohio State University, USA.

Ahmed, H I (2023) Behavior of magnetic self-compacting polypropylene fiber-reinforced concrete. Journal of Construction Engineering and Management, 149(3): 04022179, ISSN 0733-9364

Ahmed, H I (2023) Mechanical behavior, microstructure, and chloride-penetration resistance of glass waste nanopowder magnetic concrete. Journal of Construction Engineering and Management, 149(1): 04022152, ISSN 0733-9364

Al-Gahtani, K; Alsulaihi, I; Ali, M and Marzouk, M (2017) Production of green concrete using recycled waste aggregate and byproducts. Built Environment Project and Asset Management, 7(4), pp. 413-425. ISSN 2044-124X

Anh Tuan, B L; Tesfamariam, M G; Chen, Y Y; Hwang, C L; Lin, K L and Young, M P (2014) Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. Journal of Construction Engineering and Management, 140(5): 04014005, ISSN 0733-9364

Antoni, A; Yonathan, A; Suryo, H E; Felio, C; Ghozali, K E and Hardjito, D (2021) Exploring the potential of low cement concrete through a student concrete competition. International Journal of Construction Education and Research, 17(1), pp. 37-51. ISSN 1557-8771

Asa, E; Shrestha, M; Baffoe-Twum, E and Awuku, B (2020) Development of sustainable construction material from fly ash Class C. Journal of Engineering, Design and Technology, 18(6), pp. 1615-1640. ISSN 1726-0531

Asiedu, R O (2017) Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(3), pp. 305-316.

Atta, A; Ali, N; Taman, M and Etman, E (2018) Improvement the structural behavior of recycled RC elements using CdO nanoparticles. Construction Innovation, 18(2), pp. 134-151. ISSN 1471-4175

Balamurali, B; Anand, N; Thomas, M and Chin, C (2025) High-strength geopolymer based engineered cementitious composites (ECC) for sustainable and resilient construction. Journal of Engineering, Design and Technology, 23(5), pp. 1751-1769. ISSN 1726-0531

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Bansal, S; Choudhary, L; Kalra, M; Dave, N and Sharma, A K (2025) Mechanical and microstructural characteristics of structural concrete containing rca treated with sodium metasilicate. Journal of Engineering, Design and Technology, 23(3), pp. 854-870. ISSN 1726-0531

Barham, W; Al-Maabreh, A and Latayfeh, O (2023) Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature. International Journal of Building Pathology and Adaptation, 41(5), pp. 1086-1098. ISSN 23984708

Barour, S and Zergua, A (2021) Numerical analysis of reinforced concrete beams strengthened in shear using carbon fiber reinforced polymer materials. Journal of Engineering, Design and Technology, 19(2), pp. 339-357. ISSN 1726-0531

Basyouni, Y. A.; Shokry, H.; Murata, R. and Mahmoud, H. (2026) Novel development of affordable composite eco-cool roof tiles from waste materials: An experimental study. Architectural Engineering and Design Management, 22(3), pp. 900-925. ISSN 1745-2007

Bellifa, S and Boumechra, N (2019) Effects of calcium leaching on the physical and mechanical properties of aerial lime-cement mortars. Journal of Engineering, Design and Technology, 17(3), pp. 649-666. ISSN 1726-0531

Bhardwaj, A and Sharma, R K (2020) Effect of industrial wastes and lime on strength characteristics of clayey soil. Journal of Engineering, Design and Technology, 18(6), pp. 1749-1772. ISSN 1726-0531

Burroughs, S (2006) Strength of compacted earth: Linking soil properties to stabilizers. Building Research & Information, 34(1), pp. 55-65. ISSN 0961-3218

Cevallos, O A; Jaramillo, D; Ávila, C and Aldaz, X (2017) Production and quality levels of construction materials in Andean regions: A case study of Chimborazo, Ecuador. Journal of Construction in Developing Countries, 22(1), pp. 115-136. ISSN 1823-6499

Chiadighikaobi, P C and Ubani-Wokoma, B C (2025) Suitability of basalt textile-reinforced granite–periwinkle shell concrete for sustainable construction in Nigeria. Construction Economics and Building, 25(1), pp. 171-202. ISSN 2204-9029

Cho, Sung Eun (2025) Machine learning approaches for improving construction materials and pavement systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Damdelen, O and Tansu, A (2022) Influence of recycled plastic on the thermal transmittance and sustainable assessment of concrete mixes. Journal of Construction Engineering and Management, 148(12): 04022135, ISSN 0733-9364

Daniel, C and Neufville, E K (2025) An autogluon-enabled robust machine learning model for concrete tensile and compressive strength forecast. International Journal of Construction Management, 25(13), pp. 1636-1647. ISSN 1562-3599

De Oliveira, A L and Prudêncio, L R (2015) Evaluation of the superficial texture of concrete pavers using digital image processing. Journal of Construction Engineering and Management, 141(10): 04015034, ISSN 0733-9364

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

Edike, U E; Adenuga, O A; Idusuyi, D U and Oke, A A (2025) Effect of curing media on the performance of clay bricks partially stabilised with pulverised cow bone ash. Journal of Engineering, Design and Technology, 23(2), pp. 442-457. ISSN 1726-0531

Elimov, R (2003) The control of concrete quality during slipforming operations. PhD thesis, Universite de Sherbrooke, Canada.

Eziefula, U G; Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1053-1061. ISSN 1726-0531

Farmer, I W (1996) Performance of chain trenchers in mixed ground. Journal of Construction Engineering and Management, 122(2), pp. 115-124. ISSN 0733-9364

Folagbade, S O and Newlands, D M (2014) Suitability of cement combinations for carbonation resistance of structural concrete. Journal of Engineering, Design and Technology, 12(4), pp. 423-439.

Gashahun, A D (2022) Investigating sand quality effect on concrete strength: A case of debre markos and its vicinities. International Journal of Construction Management, 22(12), pp. 2234-2242. ISSN 1562-3599

Ghanbarpour, S; Mazaheripour, H; Mirmoradi, S H and Barari, A (2010) The effect of type and volume fraction (vf) of steel fiber on the mechanical properties of self-compacting concrete. Journal of Engineering, Design and Technology, 8(3), pp. 247-256. ISSN 1726-0531

Ghannoum, M; Assaad, J; Daaboul, M and El-Mir, A (2025) Deterministic and stochastic finite element modeling of reinforced concrete beams without stirrups containing plastic wastes. International Journal of Building Pathology and Adaptation, 43(4), pp. 614-632. ISSN 2398-4708

Golizadeh, H and Namini, S B (2015) Predicting the significant characteristics of concrete containing palm oil fuel ash. Journal of Construction in Developing Countries, 20(1), pp. 85-98. ISSN 1823-6499

Gooding, D and Thomas, T (1997) Soilcrete blocks. Building Research & Information, 25(4), pp. 202-209. ISSN 0961-3218

Grist, E (2014) The implementation of innovative and sustainable construction materials. EngD thesis, University of Bath, UK.

Gull, I (2011) Testing of strength of recycled waste concrete and its applicability. Journal of Construction Engineering and Management, 137(1), pp. 1-5. ISSN 0733-9364

Gurieva, V; Ilyina, A; Klyuev, S; Saidumov, M; Khezhev, T; Nedoseko, I; Fediuk, R; Shamanov, V and Yazyev, B (2025) Production of ceramic bricks using nickel slags as contribution to decarbonization. International Journal of Building Pathology and Adaptation, 43(4), pp. 652-664. ISSN 2398-4708

Hachem, A A K; Khatib, J M and Ezzedine El Dandachy, M (2025) Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer. International Journal of Building Pathology and Adaptation, 43(4), pp. 732-748. ISSN 2398-4708

Haroon, M; Khan, R B N and Khitab, A (2025) Performance of concrete containing waste demolished concrete powder as a partial substitute for cement. International Journal of Building Pathology and Adaptation, 43(4), pp. 573-590. ISSN 2398-4708

Hosseini, A (2019) Data-driven modeling of in-service performance of flexible pavements, using life-cycle information. PhD thesis, Temple University, USA.

Ibrahim, A G; Garba, M M; Okoli, O G; Zubairu, I K; Dahiru, D and Usman, J (2020) Properties of reactive powder concrete produced with unrefined metakaolin and gear inner wire. African Journal of Built Environment Research, 4(1), pp. 81-95. ISSN 2414-0236

Ibrahim, H; Wardeh, G; Fares, H and Ghorbel, E (2025) Mechanical and fracture properties of mortars reinforced with glass fibre and prepared with different cement types. International Journal of Building Pathology and Adaptation, 43(4), pp. 712-731. ISSN 2398-4708

John, S. T.; Roy, B. K.; Sarkar, P. and Davis, R. (2020) IoT enabled real-time monitoring system for early-age compressive strength of concrete. Journal of Construction Engineering and Management, 146(2): 05019020, ISSN 0733-9364

John, S T; Mohan, A; Philip, M S; Sarkar, P and Davis, R (2022) An IoT device for striking of vertical concrete formwork. Engineering, Construction and Architectural Management, 29(5), pp. 1991-2010. ISSN 0969-9988

John, S T; Sarkar, P and Davis, R (2023) A long-range wide-area network system for monitoring early-age concrete compressive strength. Journal of Construction Engineering and Management, 149(1): 04022148, ISSN 0733-9364

Kamath, M V; Prashanth, S; Kumar, M and Tantri, A (2024) Machine-learning-algorithm to predict the high-performance concrete compressive strength using multiple data. Journal of Engineering, Design and Technology, 22(2), pp. 532-560. ISSN 1726-0531

Karami, S (2008) Using by-product industrial materials to replace all cement in construction products. PhD thesis, Coventry University, UK.

Karri, S K; Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(1), pp. 42-59. ISSN 1726-0531

Karshenas, S (1997) Strength variability of conventional slab formwork systems. Journal of Construction Engineering and Management, 123(3), pp. 324-330. ISSN 0733-9364

Kashyap, V S; Sancheti, G and Yadav, J S (2023) Mechanical and microstructural behavior of concrete containing marble and nano silica. Journal of Engineering, Design and Technology, 21(5), pp. 1588-1603. ISSN 1726-0531

Kerali, A G and Thomas, T H (2002) Effect of mix retention and curing on low-cement walling blocks. Building Research & Information, 30(5), pp. 362-366. ISSN 0961-3218

Khan, A; Do, J and Kim, D (2017) Experimental optimization of high-strength self-compacting concrete based on D-optimal design. Journal of Construction Engineering and Management, 143(4): 04016108, ISSN 0733-9364

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Khatib, J; Jahami, A; El Kordi, A; Sonebi, M; Malek, Z; Elchamaa, R and Dakkour, S (2023) Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology, 21(3), pp. 862-882. ISSN 1726-0531

Kim, W S; Minh Tam, N and Jung, D H (2005) Experimental study on strength of cement stabilized clay. Journal of Engineering, Design and Technology, 3(2), pp. 116-126. ISSN 1726-0531

Lasebikan, B A; Akisanya, A R and Deans, W F (2015) Autoclave design for high pressure-high temperature corrosion studies. Journal of Engineering, Design and Technology, 13(4), pp. 539-555.

Laveglia, A; Trezza, M A and Rahhal, V F (2022) Does the colour of the waste glass affect their efficiency as supplementary cementitious material? International Journal of Construction Management, 22(16), pp. 3098-3108. ISSN 1562-3599

Lovencin, W (2006) Assessment of design and properties for flowable fill usage in highway pavement construction for conditions in Florida. PhD thesis, University of Florida, USA.

Maia, M E; Nogueira Silva, F A; Nascimento, N P d S; Azevedo, A and Delgado, J M P Q (2025) Effect of alkali-silica reaction on the mechanical properties of concrete with and without pozzolan. International Journal of Building Pathology and Adaptation, 43(8), pp. 124-139. ISSN 2398-4708

Mater, Y; Kamel, M; Karam, A and Bakhoum, E (2023) Ann-python prediction model for the compressive strength of green concrete. Construction Innovation, 23(2), pp. 340-359. ISSN 1471-4175

Mensah, S; Ameyaw, C; Abaitey, B A and Yeboah, H O (2022) Optimizing stabilization of laterite as walling unit. Journal of Engineering, Design and Technology, 20(6), pp. 1482-1498. ISSN 1726-0531

Mitikie, B B and Lee, T S (2019) Experimental investigation of enzyme stabilization and its effect on clay brick. Journal of Construction Engineering and Management, 145(4): 04019012, ISSN 0733-9364

Mollo, L (2015) Influence of cement/sand ratio on behavior of cement mortar. Journal of Engineering, Design and Technology, 13(1), pp. 23-36.

Muhammad, A; Usman, N and Gambo, N (2022) Effect of binary blended pozzolanic materials on properties of self-compacting concrete. International Journal of Construction Management, 22(7), pp. 1323-1332. ISSN 1562-3599

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Nath, A D; Hoque, M I; Datta, S D and Shahriar, F (2024) Various recycled steel fiber effect on mechanical properties of recycled aggregate concrete. International Journal of Building Pathology and Adaptation, 42(3), pp. 448-468. ISSN 23984708

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Niveditha, M. and Palanisamy, T. (2026) Upcycling iron-rich industrial waste into a carbon-sequestering composite binder through optimized carbonation curing for structural applications. International Journal of Construction Management, 26(8), pp. 1471-1489. ISSN 1562-3599

Obaidat, Y T; Barham, W and Abu libdeh, R (2024) Development of interaction diagrams of reinforced concrete short columns strengthened by nsm-CFRP strips using finite element method. International Journal of Building Pathology and Adaptation, 42(6), pp. 1304-1327. ISSN 2398-4708

Okeyinka, O M (2016) The applicability of recycled waste paper as lightweight building materials. PhD thesis, University of Wolverhampton, UK.

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(2), pp. 198-212.

Ou, C-S (2007) Sustainable infrastructure materials: A life cycle assessment approach. PhD thesis, University of Colorado at Boulder, USA.

Pandey, S; Paudel, S; Devkota, K; Kshetri, K and Asteris, P G (2025) Machine learning unveils the complex nonlinearity of concrete materials' uniaxial compressive strength. International Journal of Construction Management, 25(6), pp. 635-649. ISSN 1562-3599

Patil, S V; Balakrishna Rao, K and Nayak, G (2023) Prediction of recycled coarse aggregate concrete mechanical properties using multiple linear regression and artificial neural network. Journal of Engineering, Design and Technology, 21(6), pp. 1690-1709. ISSN 1726-0531

Pekmezci, B Y and Polat Pekmezci, I (2022) Development of shear strength index test probe: Its application on historic structures. International Journal of Building Pathology and Adaptation, 40(5), pp. 693-711. ISSN 23984708

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Raheem, A A; Falola, O O and Adeyeye, K J (2012) Production and testing of lateritic interlocking blocks. Journal of Construction in Developing Countries, 17(1), pp. 35-50. ISSN 1823-6499

Ramadan, R; Ghanem, H; Khatib, J M and ElKordi, A M (2025) Effect of plant-based natural fibers on the mechanical properties and volume change of cement paste. International Journal of Building Pathology and Adaptation, 43(4), pp. 693-711. ISSN 2398-4708

Reda, R; Saad, M; Ahmed, M Z and Abd-Elkader, H (2018) Monitoring joint quality: Taguchi approach and structure investigation. Journal of Engineering, Design and Technology, 16(2), pp. 211-232. ISSN 1726-0531

Rethinam, A; Shivakumar, V D; Harish, L; Abhishek, M B; Ramana, G V; Madhusudana, R; Sah, R and Manjini, S (2015) Grain refinement of c-mn steel through thermo-mechanical processing. Journal of Engineering, Design and Technology, 13(2), pp. 282-297.

Sahu, V; Attri, R; Gupta, P and Yadav, R (2020) Development of eco friendly brick using water treatment plant sludge and processed tea waste. Journal of Engineering, Design and Technology, 18(3), pp. 727-738. ISSN 1726-0531

Saleem, M; Elshami, M M and Najjar, M (2017) Development, testing, and implementation strategy of a translucent concrete-based smart lane separator for increased traffic safety. Journal of Construction Engineering and Management, 143(5): 04016129, ISSN 0733-9364

Santamaria Carrera, J L (2017) Quantifying the effect of construction site factors on concrete quality, costs and production rates. PhD thesis, University of New Mexico, USA.

Sarireh, M (2022) Examining the suitability of Tripoli as admixture in cement paste. International Journal of Construction Management, 22(16), pp. 3169-3174. ISSN 1562-3599

Sarkar, D and Dutta, G (2010) Design and application of risk adjusted cumulative sum for strength monitoring of ready mixed concrete. Journal of Construction Engineering and Management, 136(6), pp. 623-631. ISSN 0733-9364

Sharma, R (2021) Effect of wastes and admixtures on compressive strength of concrete. Journal of Engineering, Design and Technology, 19(1), pp. 219-244. ISSN 1726-0531

Sinclair, C. and Alwan, Z. (2026) Adaptability of concrete blocks, reinforced with recycled plastics: Circular construction approach from the UK. International Journal of Building Pathology and Adaptation, 44(4), pp. 1030-1045. ISSN 2398-4708

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Tantri, A; Nayak, G; Shenoy, A and Shetty, K K (2022) Development of self-compacting concrete using bailey aggregate grading technique in comparison with Indian standard code of practice. Journal of Engineering, Design and Technology, 20(6), pp. 1664-1697. ISSN 1726-0531

Tayebi Jebeli, M; Asadollahfardi, G and Abbasi Khalil, A (2022) Novel application of micro-nanobubble water for recycling waste foundry sand: Toward green concrete. Journal of Construction Engineering and Management, 148(9): 04022096, ISSN 0733-9364

Tu, J; Liu, Y; Zhou, M and Li, R (2021) Prediction and analysis of compressive strength of recycled aggregate thermal insulation concrete based on GA-bp optimization network. Journal of Engineering, Design and Technology, 19(2), pp. 412-422. ISSN 1726-0531

Tuvayanond, W; Kamchoom, V and Prasittisopin, L (2026) Efficient machine learning for strength prediction of ready-mix concrete production (prolonged mixing). Construction Innovation, 26(2), pp. 369-394. ISSN 1471-4175

Uddin, M; Mahboub, K C and Goodrum, P M (2011) Effects of nonnormal distributions on highway construction acceptance pay factor calculation. Journal of Construction Engineering and Management, 137(2), pp. 108-118. ISSN 0733-9364

Umar, M; Ofem, M I; Anwar, A S and Salisu, A G (2021) Modelling of mechanical properties of Pa6 based reinforced graphite and graphite nano platelets composites using different aspect ratio. Journal of Engineering, Design and Technology, 19(4), pp. 809-827. ISSN 1726-0531

Valizadeh Kiamahalleh, M.; Gholampour, A.; Tang, Y. and Ngo, T. D. (2026) Delithiated β-spodumene as a partial cement replacement in waste-based concrete with recycled aggregates and sugarcane fiber. International Journal of Construction Management, 26(10), pp. 2245-2257. ISSN 1562-3599

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Vijaya Prasad, B; Paul Daniel, A P; Anand, N and Yadav, S K (2022) Strength and microstructure behaviour of high calcium fly ash based sustainable geo polymer concrete. Journal of Engineering, Design and Technology, 20(2), pp. 436-454. ISSN 1726-0531

Wasserman, B (2012) Wash water in the mix: Effects on the compressive strength of concrete. International Journal of Construction Education and Research, 8(4), pp. 301-316. ISSN 1557-8771

Zaryoun, M and Hosseini, M (2019) Lightweight fiber-reinforced clay as a sustainable material for disaster resilient architecture of future buildings. Architectural Engineering and Design Management, 15(6), pp. 430-444. ISSN 1745-2007

Zhang, Y; Liu, L; Song, Z; Zhao, Y and He, S (2024) Enhancing tunnel boring machine penetration rate predictions through particle swarm optimization and elman neural networks. Journal of Construction Engineering and Management, 150(9): 04024116, ISSN 0733-9364

Zhao, Y (2023) Sustainability, acceptance risk analysis and machine learning in assessing mechanical properties and the impact of highway materials in transportation infrastructure. PhD thesis, University of Maryland, College Park, USA.

de Bem, D H; Lima, D P B and Medeiros-Junior, R A (2018) Effect of chemical admixtures on concrete's electrical resistivity. International Journal of Building Pathology and Adaptation, 36(2), pp. 174-187. ISSN 23984708

de Bem, D H; Trentin, P O and Medeiros-Junior, R A (2022) Effect of hydrated lime on efflorescence formation. International Journal of Building Pathology and Adaptation, 40(5), pp. 775-790. ISSN 23984708

van Tonder, P and Low, M S (2021) The effect of CO loading on the properties of normal concrete vs fly ash concrete. Journal of Engineering, Design and Technology, 19(6), pp. 1472-1487. ISSN 1726-0531