Items with Subject: innovation and technology management

Aagaard, L K (2021) The meaning of convenience in smart home imaginaries: Tech industry insights. Buildings & Cities, 2(1), pp. 568-582. ISSN 2632-6655

Abadi, M (2005) Issues and challenges in communication within design teams in the construction industry: Investigation the use of virtual teams and information and communication technologies in the UK construction industry. PhD thesis, University of Manchester, UK.

Abadi, M; Huang, J; Yeow, J; Mohandes, S R and Zhang, L (2025) Towards a complex push-to-pull dynamics in circular construction supply chains: A systematic literature review. Engineering, Construction and Architectural Management, 32(2), pp. 912-938. ISSN 0969-9988

Abanda, F H (2011) Knowledge modelling of emerging technologies for sustainable building development. PhD thesis, Oxford Brookes University, UK.

Abanda, F H and Tah, J H M (2008) Towards developing a sustainable building technology ontology. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Abankwa, Derek Asante (2021) What drives technology adaptation in construction firms? An investigation of the antecedents, adaptive behaviours, and outcomes. PhD thesis, University of Hong Kong, Hong Kong.

Abd El Halim, A E H O and Haas, R (2004) Process and case illustration of construction innovation. Journal of Construction Engineering and Management, 130(4), pp. 570-575. ISSN 0733-9364

Abdalla-Salem, S B (2009) Computer-aided planning and building process. PhD thesis, Technische Universitaet Berlin, Germany.

Abdallah, A M (2021) A study on bridge inspections: Identifying barriers to new practices and providing strategies for change. PhD thesis, Colorado State University, USA.

Abdelaal, A; Ma, J; Zhang, H; Shobeiri, V and Xie, Y M (2026) Bio-stabilized modular rammed earth blocks for sustainable and aesthetic construction. Construction Innovation, 26(9), pp. 1-20. ISSN 1471-4175

Abdelhamid, T S and Everett, J G (1999) Time series analysis for construction productivity experiments. Journal of Construction Engineering and Management, 125(2), pp. 87-95. ISSN 0733-9364

Abdelmassih, A; Faddoul, R and Geara, F (2023) Impact of autonomous solutions on earthmoving electrification using machine learning: Case study. Construction Innovation, 23(3), pp. 606-621. ISSN 1471-4175

Abdelmohsen, S M A (2011) An ethnographically informed analysis of design intent communication in BIM-enabled architectural practice. PhD thesis, Georgia Institute of Technology, USA.

Abdirad, H (2017) Metric-based BIM implementation assessment: A review of research and practice. Architectural Engineering and Design Management, 13(1), pp. 52-78. ISSN 1745-2007

Abdollahipour, S; Jeong, D H S; Burman, R R and Gunsaulis, F (2012) Performance assessment of on-grade horizontal directional drilling. Journal of Construction Engineering and Management, 138(3), pp. 458-468. ISSN 0733-9364

Abdullah, A (2003) Intelligent selection of demolition techniques. PhD thesis, Loughborough University, UK.

Abeid, J and Arditi, D (2002) Time-lapse digital photography applied to project management. Journal of Construction Engineering and Management, 128(6), pp. 530-535. ISSN 0733-9364

Abisuga, Olatunji (2020) Integrated collaborative facilities management framework for post-occupancy evaluation of higher education facilities. PhD thesis, University of New South Wales, Australia.

Abkar, M M A; Yunus, R; Harouache, A; Gamil, Y and Al-Shameri, A S A S (2025) The adoption of automation technology for the mitigation of material waste on construction sites in the Malaysian construction industry. International Journal of Construction Management, 25(5), pp. 530-541. ISSN 1562-3599

Abuelma'atti, A (2012) A strategic approach to the implementation of information technologies in small and medium-sized architecture, engineering and construction enterprises. PhD thesis, University of Salford, UK.

Abuelmaatti, A and Ahmed, V (2010) The potential of collaborative environments implementation in small and medium enterprises for the construction industry. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Acar, E; Koçak, I; Sey, Y and Arditi, D (2005) Use of information and communication technologies by small and medium-sized enterprises (SMEs) in building construction. Construction Management and Economics, 23(7), pp. 713-722. ISSN 01446193

Acheampong, A; Adjei, E K; Asiedu, R O; Atibila, D W and Abu, I M A (2025) Evaluating the factors influencing artificial intelligence technology uptake in health and safety management within the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 2060-2081. ISSN 1726-0531

Acheng, P O; Kibwami, N; Mukasa, T J; Odongkara, B B; Birungi, R; Semanda, J and Manga, M (2023) Building information modelling adoption in uganda's construction industry. International Journal of Construction Management, 23(13), pp. 2185-2208. ISSN 1562-3599

Adafin, J; Wilkinson, S; Rotimi, J O B; MacGregor, C; Tookey, J and Potangaroa, R (2022) Creating a case for innovation acceleration in the New Zealand building industry. Construction Innovation, 22(1), pp. 185-204. ISSN 1471-4175

Addy, M. N.; Addo, E. T.; Abdulai, S. F.; Kwofie, T. E.; Aigbavboa, C. O. and Adade-Boateng, A. O. (2026) E-procurement acceptance in the Ghanaian public sector: An application of an extended technology acceptance model (TAM) in the construction industry. Journal of Engineering, Design and Technology, 24(2), pp. 494-515. ISSN 1726-0531

Addy, M; Adinyira, E; Danku, J C and Dadzoe, F (2021) Impediments to the development of the green building market in Sub-Saharan Africa: The case of Ghana. Smart and Sustainable Built Environment, 10(2), pp. 193-207. ISSN 2046-6099

Adebowale, O J and Agumba, J N (2024) Applications of augmented reality for construction productivity improvement: A systematic review. Smart and Sustainable Built Environment, 13(3), pp. 479-495. ISSN 2046-6099

Adefila, A; Abuzeinab, A; Whitehead, T and Oyinlola, M (2020) Bottle house: Utilising appreciative inquiry to develop a user acceptance model. Built Environment Project and Asset Management, 10(4), pp. 567-583. ISSN 2044-124X

Adegoke, A S; Oladokun, T T; Ayodele, T O; Agbato, S E and Jinadu, A A (2022) DEMATEL method of analysing the factors influencing the decision to adopt virtual reality technology by real estate firms in Lagos property market. Smart and Sustainable Built Environment, 11(4), pp. 891-917. ISSN 2046-6099

Adekanye, O G (2019) Evaluation of building policies, programs, and potential for energy efficiency in the United States. PhD thesis, Carnegie Mellon University, USA.

Adeniyi, O; Thurairajah, N and Leo-Olagbaye, F (2024) Rethinking digital construction: A study of BIM uptake capability in BIM infant construction industries. Construction Innovation, 24(2), pp. 584-605. ISSN 1471-4175

Adeosun, F E and Oke, A E (2024) Examining the awareness and usage of cyber physical systems for construction projects in Nigeria. Journal of Engineering, Design and Technology, 22(1), pp. 281-294. ISSN 1726-0531

Adu-Amankwa, N. A. N. and Rahimian, F. (2026) Harnessing blockchain-enabled digital twins for building commissioning: Examining practitioners' perspectives. Engineering, Construction and Architectural Management, 33(3), pp. 1891-1906. ISSN 0969-9988

Afum, E; Sun, Z; Agyabeng-Mensah, Y and Baah, C (2023) Lean production systems, social sustainability performance and green competitiveness: The mediating roles of green technology adoption and green product innovation. Journal of Engineering, Design and Technology, 21(1), pp. 206-227. ISSN 1726-0531

Afzal, Fatima (2019) A framework to improve sustainability performance of construction organisations. PhD thesis, University of New South Wales, Australia.

Agapiou, A; Price, A D F and McCaffer, R (1995) Planning future construction skill requirements: Understanding labour resource issues. Construction Management and Economics, 13(2), pp. 149-161. ISSN 01446193

Agdas, D and Ellis, R D (2010) The potential of xml technology as an answer to the data interchange problems of the construction industry. Construction Management and Economics, 28(7), pp. 737-746. ISSN 1466433X

Aghimien, D; Ikuabe, M; Aliu, J; Aigbavboa, C; Oke, A E and Edwards, D J (2023) Empirical scrutiny of the behavioural intention of construction organisations to use unmanned aerial vehicles. Construction Innovation, 23(5), pp. 1075-1094. ISSN 1471-4175

Aghimien, D O; Ikuabe, M; Aigbavboa, C; Oke, A and Shirinda, W (2021) Unravelling the factors influencing construction organisations' intention to adopt big data analytics in South Africa. Construction Economics and Building, 21(3), pp. 262-281. ISSN 2204-9029

Agustí-Juan, I (2018) Sustainability assessment and development of guidelines for digital fabrication in construction. DSc thesis, ETH Zürich, Switzerland.

Ahmed, M U (2000) ‘Champions of collaboration’ in collaborative technological innovation. PhD thesis, Simon Fraser University, Canada.

Ahmed, V S (2000) The effectiveness of computer assisted learning in construction. PhD thesis, Loughborough University, UK.

Ahn, C R; Lee, S; Sun, C; Jebelli, H; Yang, K and Choi, B (2019) Wearable sensing technology applications in construction safety and health. Journal of Construction Engineering and Management, 145(11): 03119007, ISSN 0733-9364

Aibinu, A A and Papadonikolaki, E (2020) Conceptualizing and operationalizing team task interdependences: BIM implementation assessment using effort distribution analytics. Construction Management and Economics, 38(5), pp. 420-446. ISSN 01446193

Ainoo, F N Y (2025) Leveraging big data in AEC decision-making: A governance framework. PhD thesis, Capella University, USA.

Ajelabi, I K (2013) Product based project portfolio and information sharing. PhD thesis, University of Reading, UK.

Akande, I.; Opoko, A. P. and Adewolu, A. O. (2026) Exploring the relationships between emerging technologies and design process in Nigerian architectural firms. Engineering, Construction and Architectural Management, pp. 1-21. ISSN 0969-9988

Akanmu, A and Anumba, C J (2015) Cyber-physical systems integration of building information models and the physical construction. Engineering, Construction and Architectural Management, 22(5), pp. 516-535. ISSN 0969-9988

Akcamete, A (2011) A formal approach for managing facility change information and capturing change history as part of building information models (BIMs). PhD thesis, Carnegie Mellon University, USA.

Akindele, O; Ajayi, S; Oyegoke, A S; Alaka, H A and Omotayo, T (2025) Application of geographic information system (GIS) in construction: A systematic review. Smart and Sustainable Built Environment, 14(1), pp. 210-236. ISSN 2046-6099

Akmam Syed Zakaria, S; Gajendran, T; Rose, T and Brewer, G (2018) Contextual, structural and behavioural factors influencing the adoption of industrialised building systems: A review. Architectural Engineering and Design Management, 14(1-2), pp. 3-26. ISSN 1745-2007

Akmam Syed Zakaria, S; Gajendran, T; Skitmore, M and Brewer, G (2018) Key factors influencing the decision to adopt industrialised building systems technology in the Malaysian construction industry: An inter-project perspective. Architectural Engineering and Design Management, 14(1-2), pp. 27-45. ISSN 1745-2007

Aksenova, G; Kiviniemi, A; Kocaturk, T and Lejeune, A (2019) From Finnish AEC knowledge ecosystem to business ecosystem: Lessons learned from the national deployment of BIM. Construction Management and Economics, 37(6), pp. 317-335. ISSN 01446193

Aksenova, G and Oti-Sarpong, K (2024) Beyond "platformania" in the construction sector: Conceptualisations and implications of product platformisation in the UK. Construction Management and Economics, 42(3), pp. 229-250. ISSN 01446193

Al Neyadi, A (2019) Sustainable and digital strategies for enhancing United Arab Emirates construction industry competiveness. PhD thesis, University of Wolverhampton, UK.

Al-Biqami, N M (2001) Virtual procurement system for virtual enterprises. PhD thesis, University of Nottingham, UK.

Al-Ghassani, A M (2003) Improving the structural design process: a knowledge management approach. PhD thesis, Loughborough University, UK.

Al-Ghassani, A M; Kamara, J M; Anumba, C J and Carrillo, P M (2004) An innovative approach to identifying knowledge management problems. Engineering, Construction and Architectural Management, 11(5), pp. 349-357. ISSN 0969-9988

Al-Hamadani, S; Egbelakin, T; Sher, W and von Meding, J K (2021) Drivers of applying ecological modernization to construction waste minimization in New South Wales construction industry. Construction Economics and Building, 21(3), pp. 80-104. ISSN 2204-9029

Al-Jallal, A A (1991) Technology adoption and innovation patterns in construction industry in Saudi Arabia: An exploratory study. PhD thesis, University of Texas at Austin, USA.

Al-Kayed, A. A.; Rotimi, F. E.; Purushothaman, M. B.; Pawley, M. and Ghaffarian Hoseini, A. (2026) Modelling the enablers of effective digital technology implementation for competitiveness enhancement among subcontracting organisations in new zealand's residential construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 894-919. ISSN 1726-0531

Al-Nasser, A A (2001) Optimisation of construction implemented as a manufacturing process. PhD thesis, University of Sussex, UK.

Alaboud, N S M (2016) Development of a framework to enhance communication practice for site-based construction workers in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Alam, Sadaf (2024) Development of the framework and the methodologies towards nzebs in Finland. PhD thesis, Aalto University, Finland.

Alamoudi, A K; Abidoye, R B and Lam, T Y M (2024) An evaluation of stakeholders' participation process in developing smart sustainable cities in Saudi Arabia. Smart and Sustainable Built Environment, 13(5), pp. 1074-1095. ISSN 2046-6099

Aldridge, G; Pasquire, C; Gibb, A and Blismas, N G (2001) Methods for measuring the "unmeasurable": Evaluating the benefits of pre-assembly and standardization in construction. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Algassim, Hesham M (2024) Developing an architectural technology adoption model considering organizational factors: Case of Saudi Arabia. PhD thesis, University of New South Wales, Australia.

Alhusban, M; Nasereddin, M; Alghossoon, A and Hatamleh, M T (2025) A hybrid conceptual procurement framework for BIM uptake to enhance buildings' sustainability performance in the Jordanian public sector. International Journal of Building Pathology and Adaptation, 43(1), pp. 93-116. ISSN 2398-4708

Ali, Abdussalam (2018) Managing codesign in dynamic alliance networks. PhD thesis, University of Technology Sydney, Australia.

Ali, F; Chowdary, B V and Gonzales, L (2013) An integrated design approach for rapid product development: A case study through application of reverse engineering, re-engineering and fast prototyping tools. Journal of Engineering, Design and Technology, 11(2), pp. 178-189. ISSN 1726-0531

Aljarman, M (2016) Emerging risk from the application of building information modelling through the life cycle of projects. PhD thesis, University of Liverpool, UK.

Alkalbani, S (2009) Exploring information and communication technology adoption and diffusion in the Omani construction industry. PhD thesis, University of Salford, UK.

Alkalbani, S; Rezgui, Y; Vorakulpipat, C and Wilson, I E (2013) ICT adoption and diffusion in the construction industry of a developing economy: The case of the Sultanate of Oman. Architectural Engineering and Design Management, 9(1), pp. 62-75. ISSN 1745-2007

Alkalbani, Saeed (2009) Exploring ICT adoption and diffusion in the Omani construction industry. PhD thesis, University of Salford, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Almatari, H A Q; Chan, M and Masrom, M A N (2024) Factors inhibiting the adoption of industrial revolution 4.0 in malaysian construction industry. Smart and Sustainable Built Environment, 13(4), pp. 1041-1065. ISSN 2046-6099

Alosaimi, H (2019) Embedding knowledge management strategies in the Kingdom of Saudi Arabia construction industry. PhD thesis, University of Wolverhampton, UK.

Alqahtani, A and Whyte, A (2013) Artificial neural networks incorporating cost significant items towards enhancing estimation for (life-cycle) costing of construction projects. Construction Economics and Building, 13(3), pp. 51-64. ISSN 2204-9029

Alqarni, K H (2018) A case study of information technology acceptance in the Saudi Arabian architecture, engineering and construction industry. PhD thesis, University of Reading, UK.

Alsafouri, S (2017) Information technology and human factors to enhance design and constructability review processes in construction. PhD thesis, Arizona State University, USA.

Alshahrani, A Y (2020) Interpretive investigation into the implementation of sustainable business models within Saudi housing construction industry. PhD thesis, University of Salford, UK.

Altaf, A (2022) Integrating safety, security and human factors engineering in rail infrastructure design and evaluation. PhD thesis, Bournemouth University, UK.

Altuglu, V (2005) Essays on infrastructure development subsidization by product firms. PhD thesis, Columbia University, USA.

Alves, N M F and Bártolo, P J S (2002) Reversing design through computer vision. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Alwashah, Z.; Sweis, G. J.; Abu Hajar, H.; Abu-Khader, W. and Sweis, R. (2026) Awareness and willingness to adopt Construction 4.0 technologies: Evidence from Jordan. Engineering, Construction and Architectural Management, 33(7), pp. 5364-5383. ISSN 0969-9988

Alzahrani, S (2015) Dynamic simulation of the impact of risk events and risk cost in KSA PPP projects. PhD thesis, University of Liverpool, UK.

Ameyaw, E. E.; Agyekum-Mensah, G.; Kumar, B. and Edwards, D. J. (2026) Understanding barriers to the adoption of blockchain-enabled smart contracts in construction projects: Perspectives of construction practitioners. Smart and Sustainable Built Environment, 15(2), pp. 597-621. ISSN 2046-6099

Amini, M; Mahdavinejad, M and Bemanian, M (2019) Future of interactive architecture in developing countries: Challenges and opportunities in case of Tehran. Journal of Construction in Developing Countries, 24(1), pp. 163-184. ISSN 1823-6499

Amiri, Mojtaba and Saghatforoush, Ehsan (2026) From exploration to prioritization: Advancing BIM-IOT integration for construction health and safety improvement. Journal of Construction Business and Management, 8(S1), pp. 125-139. ISSN 2521-0165

Ammar, Ashtarout (2023) Digital twins for ancillary transportation asset data management. PhD thesis, University of Kentucky, USA.

Amponsah, I (2008) Emerging civil infrastructure and environmental sustainability: Life-cycle assessment and multiobjective optimization. PhD thesis, University of South Carolina, USA.

Amuda-Yusuf, G (2018) Critical success factors for building information modelling implementation. Construction Economics and Building, 18(3), pp. 55-73. ISSN 2204-9029

Andrade, J B (2017) Early stage design methodology to ensure life cycle sustainability of residential buildings. PhD thesis, Universidade do Minho, Portugal.

Annor, John (2025) Building pathways to the future: Leveraging collaborative instruction platforms to address global and regional challenges in construction workforce education. PhD thesis, University of Wyoming, USA.

Ansah, S K (2018) An integrated total quality management model for the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Anumba, C E H; Dainty, A; Ison, S and Sergeant, A (2006) Understanding structural and cultural impediments to ICT system integration: A GIS-based case study. Engineering, Construction and Architectural Management, 13(6), pp. 616-633. ISSN 0969-9988

Appuhamilage, B G; Ershadi, M and Jefferies, M (2023) A review of the role of project management offices in establishing offsite construction capabilities. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Arai, K and Morimoto, E (2021) What is required for recovering from disaster: Theoretical and empirical verification. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Arai, K and Morimoto, E (2021) Productivity and innovation in the Japanese construction industry. Construction Innovation, 21(4), pp. 917-933. ISSN 1471-4175

Arantes, Pedro Fiori (2010) Architecture in the financial-digital era: The design, construction, and rent of form. PhD thesis, Universidade de São Paulo, Brazil.

Araujo, C. M. B. d and Alves, J. L. (2026) How to unlock BIM capabilities in the design phase to project success for long-term organization development? Engineering, Construction and Architectural Management, 33(3), pp. 2154-2175. ISSN 0969-9988

Araujo, Luís Otávio Cocito de (2005) Method to propose directions improving labor productivity in the steel reinforcement activities. PhD thesis, Universidade de São Paulo, Brazil.

Arayici, Y and Aouad, G (2004) Industry driven innovative systems development for the construction industry: The DIVERCITY project. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Arditi, D; Kale, S and Tangkar, M (1997) Innovation in construction equipment and its flow into the construction industry. Journal of Construction Engineering and Management, 123(4), pp. 371-378. ISSN 0733-9364

Arora, M; Prakash, A; Mittal, A and Singh, S (2024) Examining the slow acceptance of HR analytics in the Indian engineering and construction industry: A SEM-ann-based approach. Engineering, Construction and Architectural Management, 31(5), pp. 1973-1993. ISSN 0969-9988

Ata, O W; Alsalfiti, M S and Rabaya, K S (2025) Building information modeling adoption in the Palestinian construction industry: Influencing factors, external determinants, and technology acceptance. International Journal of Construction Education and Research, 21(4), pp. 482-532. ISSN 1557-8771

Atasoy, G (2013) Visualizing and interacting with construction project performance information. PhD thesis, Carnegie Mellon University, USA.

Atiq Ur Rehman, M.; Khan, S. A. and Chaabane, A. (2026) An integrated decision support model for early planning in off-site construction projects. Journal of Construction Engineering and Management, 152(9): 04026142, ISSN 0733-9364

Attia, T M (2002) The impact of communication technologies on group problem-solving performance in construction. PhD thesis, North Carolina State University, USA.

Atuahene, B T; Kanjanabootra, S and Gajendra, T (2020) Benefits of big data application experienced in the construction industry: A case of an Australian construction company. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Atuahene, B T; Kanjanabootra, S and Gajendran, T (2018) Towards an integrated framework of big data capabilities in the construction industry: A systematic literature review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Awolusi, I G (2017) Active construction safety leading indicator data collection and evaluation. PhD thesis, University of Alabama, USA.

Awwad, K A; Shibani, A and Ghostin, M (2022) Exploring the critical success factors influencing BIM level 2 implementation in the UK construction industry: The case of SMEs. International Journal of Construction Management, 22(10), pp. 1894-1901. ISSN 1562-3599

Axon, S and Morrissey, J (2020) Just energy transitions? Social inequities, vulnerabilities and unintended consequences. Buildings & Cities, 1(1), pp. 393-411. ISSN 2632-6655

Ayat, M; Qureshi, S M and Kang, C (2025) The moderating role of emerging technologies on the impact of coronavirus disease 2019 and the performance of construction projects: The case of Pakistan. Journal of Engineering, Design and Technology, 23(1), pp. 21-50. ISSN 1726-0531

Ayinla, K; Cheung, F and Tawil, R A (2019) Towards an ontology-based approach to measuring productivity for offsite manufacturing method. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Ayinla, K O and Adamu, Z (2018) Bridging the digital divide gap in BIM technology adoption. Engineering, Construction and Architectural Management, 25(10), pp. 1398-1416. ISSN 0969-9988

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Azhar, S; Khalfan, M and Maqsood, T (2012) Building information modeling (BIM): Now and beyond. Construction Economics and Building, 12(4), pp. 15-28. ISSN 2204-9029

Azim, S W (2011) Understanding and managing project complexity. PhD thesis, University of Manchester, UK.

Back, W E (1994) Quantifying benefits of electronic technology applied to bulk materials management. PhD thesis, Clemson University, USA.

Bademosi, F M (2019) Robotics and automation in construction: Assessment of knowledge, skills and abilities necessary for talent cultivation in industry and education. PhD thesis, University of Florida, USA.

Badi, Sulafa M (2012) Sustainable energy innovation (SEI) within private finance initiative (PFI) projects. PhD thesis, University College London, UK.

Bahrami, S and Zeinali, D (2023) The sustainability challenge of product information quality in the design and construction of facades: Lessons from the grenfell tower fire. Smart and Sustainable Built Environment, 12(3), pp. 488-506. ISSN 2046-6099

Bai, Y and Burkett, W R (2006) Rapid bridge replacement: Processes, techniques, and needs for improvements. Journal of Construction Engineering and Management, 132(11), pp. 1139-1147. ISSN 0733-9364

Bai, Y; Kim, S H and Burkett, W R (2007) Enhancing the capability of rapid bridge replacement after extreme events. Engineering, Construction and Architectural Management, 14(4), pp. 375-386. ISSN 0969-9988

Bajpai, A and Misra, S C (2023) A framework for continuation of digitalization in construction: A PLS-SEM approach. Engineering, Construction and Architectural Management, 30(10), pp. 4715-4734. ISSN 0969-9988

Bakens, W (1997) International trends in building and construction research. Journal of Construction Engineering and Management, 123(2), pp. 102-112. ISSN 0733-9364

Baker, H (2021) A multimethod approach to learning from text-based construction failure data. PhD thesis, University of Edinburgh, UK.

Baldwin, A; Li, H; Huang, T; Kong, C W; Guo, H L; Chan, N and Wong, J (2009) Supporting pre-tender construction planning with virtual prototyping. Engineering, Construction and Architectural Management, 16(2), pp. 150-161. ISSN 0969-9988

Baldwin, A N and McCaffer, R (2000) Identifying research requirements for collaborative design. Journal of Construction Procurement, 6(1), pp. 56-66. ISSN 1358-9180

Ball, Z; Cagan, J and Kotovsky, K (2024) Supporting management of new product development via a novel conceptual model: An interview driven approach. Journal of Engineering, Design and Technology, 22(3), pp. 991-1011. ISSN 1726-0531

Balogun, T B; Awonuga, O O and Abowen-Dake, R (2023) Investigating digital technological competencies amongst black Asian minority ethnic construction students in the UK. Journal of Engineering, Design and Technology, 21(6), pp. 1857-1882. ISSN 1726-0531

Bambrah, G K (1989) A systematic approach to appraisal/evaluation of civil engineering projects, with special emphasis on technology. PhD thesis, Loughborough University, UK.

Barbosa, Adriano Aurelio Ribeiro (2014) Implementing a sound power method for testing noise on masonry saw. PhD thesis, Universidade Estadual de Campinas, Brazil.

Basha, M (2021) Intra-sector firm performance and its determinants in the UK construction industry. PhD thesis, University of Westminster, UK.

Basri, H (1994) An expert system for preliminary landfill design in developing countries. PhD thesis, University of Leeds, UK.

Baumgärtner, C E (2000) Collaboration between engineering consultants and their clients: characteristics of success. PhD thesis, University of Cambridge, UK.

Baxendale, A T (1992) Construction management information systems for production control. PhD thesis, Bristol Polytechnic, UK.

Baxter, R J (2008) Middle range theorizing about information technology impact: A study of 3D CAD impact on construction work practices. PhD thesis, Case Western Reserve University, USA.

Bayhan, H G (2025) Transaction costs in construction project team communications: Language model and network science applications. PhD thesis, Michigan State University, USA.

Beadle, K (2008) Analysis of the design process for low-energy housing. PhD thesis, De Montfort University, UK.

Becerik, B (2006) Implementation and value of online collaboration and project management systems in design and construction. DDes thesis, Harvard University, USA.

Bello, A O; Olanrewaju, O I; Gbenga, P O; Khan, A A and Isa, R B (2025) Exploring the barriers to digital twin adoption in the Nigerian construction industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(5), pp. 1541-1572. ISSN 1726-0531

Bello, A O; Abdulraheem, A A; Afolabi, O P; Aka, A and Gbenga, P O (2024) Assessing the underlying factors affecting trust and transparency in the construction industry: A mixed method approach. Construction Economics and Building, 24(1-2), pp. 3-28. ISSN 2204-9029

Bello, A O; Abdulraheem, A A; Agboola, S A and Afolabi, O P (2025) Factors influencing the adoption of distributed ledger technology in developing countries: An examination of Nigerian construction industry. International Journal of Construction Education and Research, 21(3), pp. 290-320. ISSN 1557-8771

Bello, A O and Ayegba, C (2025) Drivers for the adoption of building information modelling (BIM) for post-construction management in the Nigerian aeco industry. Journal of Financial Management of Property and Construction, 30(1), pp. 137-153. ISSN 1366-4387

Bello, A O and Ayegba, C (2025) Adoption of building information modelling for post-construction in Nigeria: Examination of barriers and strategies development. International Journal of Building Pathology and Adaptation, 43(6), pp. 1501-1521. ISSN 2398-4708

Bencze, O C; Dasmohapatra, S and Tilotta, D C (2012) A concept for a performance-based rating system for home resilience: ReScU. International Journal of Disaster Resilience in the Built Environment, 3(2), pp. 148-165. ISSN 1759-5916

Bendi, D (2017) Developing an offsite readiness framework for Indian construction organisations. PhD thesis, University of Salford, UK.

Benjaoran, V; Dawood, N and Scott, D (2004) Bespoke precast productivity estimation with neural network model. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Berry, S; Sharp, A; Hamilton, J and Killip, G (2014) Inspiring low-energy retrofits: The influence of open home events. Building Research & Information, 42(4), pp. 422-433. ISSN 0961-3218

Bevan, W and Lu, S (2012) A multidisciplinary literature review of low and zero carbon technologies into new housing. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bhangale, K; Joshi, K; Gupta, R and Gardas, B (2025) Assessing project complexity factors for railway megaprojects: A Delphi-BWM approach. Journal of Engineering, Design and Technology, 23(3), pp. 973-997. ISSN 1726-0531

Bhattacharya, S and Momaya, K S (2021) Actionable strategy framework for digital transformation in AECO industry. Engineering, Construction and Architectural Management, 28(5), pp. 1397-1422. ISSN 0969-9988

Bigdellou, S and Chen, Q (2026) Quantification of economic influences on technology adoption and diffusion in the construction industry. International Journal of Construction Management, 26(4), pp. 621-638. ISSN 1562-3599

Bijleveld, F R; Miller, S R and Dorée, A G (2015) Making operational strategies of asphalt teams explicit to reduce process variability. Journal of Construction Engineering and Management, 141(5): 04015002, ISSN 0733-9364

Bijleveld F R, D e A G (2013) Method-based learning: A case in the asphalt construction industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bin Asad, S.; Purushothaman, M. B. and Poshdar, M. (2026) Interactions of factors affecting the implementation of integrated project delivery in the New Zealand construction industry: A system dynamics and network analysis approach. Construction Management and Economics, 44(6), pp. 453-479. ISSN 0144-6193

Birgonul, Z (2021) A receptive-responsive tool for customizing occupant's thermal comfort and maximizing energy efficiency by blending BIM data with real-time information. Smart and Sustainable Built Environment, 10(3), pp. 504-535. ISSN 2046-6099

Blanco, J (2016) Beyond the checklist: An approach to understand practitioner experience during sustainable design process. Architectural Engineering and Design Management, 12(4), pp. 266-278. ISSN 1745-2007

Blindheim, J; Elverum, C W; Welo, T and Steinert, M (2020) Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling. Journal of Engineering, Design and Technology, 18(5), pp. 1139-1151. ISSN 1726-0531

Bogus, S M (2004) Concurrent engineering strategies for reducing design delivery time. PhD thesis, University of Colorado at Boulder, USA.

Bonham, M B (2013) Leading by example: New professionalism and the government client. Building Research & Information, 41(1), pp. 77-94. ISSN 0961-3218

Bosch-Sijtsema, P; Claeson-Jonsson, C; Johansson, M and Roupe, M (2021) The hype factor of digital technologies in AEC. Construction Innovation, 21(4), pp. 899-916. ISSN 1471-4175

Bossink, B A G (2004) Managing drivers of innovation in construction networks. Journal of Construction Engineering and Management, 130(3), pp. 337-345. ISSN 0733-9364

Bou Hatoum, Makram Bou (2023) Value propositions, adoption factors, and implementation considerations: Building a path towards construction innovation. PhD thesis, University of Kentucky, USA.

Boussabaine, A H and Elhag, T (1999) Applying fuzzy techniques to cash flow analysis. Construction Management and Economics, 17(6), pp. 745-755. ISSN 01446193

Boutros, M. B. F.; El Hajj, C.; Martínez Montes, G. and Jawad, D. (2026) Managerial perceptions of emerging technology adoption in construction: Evidence from developing countries. Journal of Engineering, Design and Technology, 24(4), pp. 1057-1075. ISSN 1726-0531

Bower, D J; Hinks, J; Wright, H; Hardcastle, C and Cuckow, H (2001) ICTs, videoconferencing and the construction industry: Opportunity or threat? Construction Innovation, 1(2), pp. 129-144. ISSN 1471-4175

Boyd, N J P (2016) From bicycles to buildings: a SCOT analysis of project level adoption of BIPV. PhD thesis, University of Reading, UK.

Boyd, P; Larsen, G D and Schweber, L (2014) Perspectives on the specification of building integrated photovoltaic (BIPV) technology in construction projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Brach, A M (1991) Contextual knowledge and the diffusion of technology in construction. PhD thesis, Massachusetts Institute of Technology, USA.

Bradford, C W (2017) The impact of the systematic incorporation of tolerances on gypsum board installation. PhD thesis, Indiana State University, USA.

Brandín, R and Abrishami, S (2021) Information traceability platforms for asset data lifecycle: Blockchain-based technologies. Smart and Sustainable Built Environment, 10(3), pp. 364-386. ISSN 2046-6099

Brewer, G and Gajendran, T (2012) Attitudes, behaviours and the transmission of cultural traits: Impacts on ICT/BIM use in a project team. Construction Innovation, 12(2), pp. 198-215. ISSN 1471-4175

Broo, D G and Schooling, J (2023) Digital twins in infrastructure: Definitions, current practices, challenges and strategies. International Journal of Construction Management, 23(7), pp. 1254-1263. ISSN 1562-3599

Brooks Williams, L C (2024) Artificial intelligence/machine learning as a tool for project management enhancement: A qualitative study on the future of technology in increasing the effectiveness of project managers. DIT thesis, Capella University, USA.

Brunet, M and Cohendet, P (2022) Transforming construction: Heterarchical megaproject ecologies and the management of innovation. Construction Management and Economics, 40(11-12), pp. 973-986. ISSN 01446193

Brunet, M; Motamedi, A; Guénette, L M and Forgues, D (2019) Analysis of BIM use for asset management in three public organizations in Québec, Canada. Built Environment Project and Asset Management, 9(1), pp. 153-167. ISSN 2044-124X

Bröchner, J (2010) Construction contractors as service innovators. Building Research & Information, 38(3), pp. 235-246. ISSN 0961-3218

Buhl, H; Andersen, M and Harty, J (2020) Construction industry 4.0: Entangling colliding practices. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Buhl, H; Andersen, M and Klitgaard, A (2019) Boundary objects: Supporting better collaborative practice and research. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Bunemer, Ricardo (2020) Construction 4.0 proposal for digital technological innovations for the civil construction sector: Case study of a smart house. PhD thesis, Universidade Estadual de Campinas, Brazil.

Bunjaridh, Y.; Rahman, R. A.; Yusof, L. M. and Papadonikolaki, E. (2025) Modeling the organizational attributes and strategies for developing accurate digital twins: The case of constructed facilities. International Journal of Building Pathology and Adaptation, 44(4), pp. 910-934. ISSN 2398-4708

Burfoot, M; GhaffarianHoseini, A; Ghaffarianhoseini, A and Naismith, N (2024) Passive variable acoustic technology for classroom reverberation time: A case study. Smart and Sustainable Built Environment, 13(6), pp. 1450-1472. ISSN 2046-6099

Burford, N K and Smith, F W (1999) Developing a new military shelter system: A case study in innovation. Building Research & Information, 27(1), pp. 35-55. ISSN 0961-3218

Bártolo, H M G and Bártolo, P J S (2001) Computer aided concurrent design. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

C.R, A; Murali, S; Haq, M A; Bysani, T N and Narahari, N S (2023) Exoskeleton for lower extremities based on Indian anthropomorphism with gait allowance: Design and development. Journal of Engineering, Design and Technology, 21(5), pp. 1343-1372. ISSN 1726-0531

Caerteling, J S; Halman, J I M; Song, M and Doŕe, A G (2009) Impact of government and corporate strategy on the performance of technology projects in road construction. Journal of Construction Engineering and Management, 135(11), pp. 1211-1221. ISSN 0733-9364

Caerteling, Jasper (2008) Technology development in road construction: How government roles affect project performance. PhD thesis, University of Twente, Netherlands.

Cai, W.; Hua, D.; Li, S.; Xue, S. and Xu, Z. (2026) 3D reconstruction of building interiors based on scan-to-BIM and generative design for as-built building. Engineering, Construction and Architectural Management, 33(3), pp. 1959-1979. ISSN 0969-9988

Cai, J; Li, Z; Dou, Y; Li, T and Yuan, M (2023) Understanding adoption of high off-site construction level technologies in construction based on the TAM and ttf. Engineering, Construction and Architectural Management, 30(10), pp. 4978-5006. ISSN 0969-9988

Caldas, C H; Torrent, D G and Haas, C T (2006) Using global positioning system to improve materials-locating processes on industrial projects. Journal of Construction Engineering and Management, 132(7), pp. 741-749. ISSN 0733-9364

Callcott, A E (1985) Microcomputers for civil engineering consultancy in developing countries. PhD thesis, Aston University, UK.

Calvetti, D (2021) Electronic productivity performance monitoring of construction workers. PhD thesis, Universidade do Porto, Portugal.

Cao, D; Shao, S; Huang, B and Wang, G (2022) Multidimensional behavioral responses to the implementation of BIM in construction projects: An empirical study in China. Engineering, Construction and Architectural Management, 29(2), pp. 819-841. ISSN 0969-9988

Cao, D and Wang, G (2014) Contractor-subcontractor relationships with the implementation of emerging interorganizational technologies: Roles of cross-project learning and pre-contractual opportunism. International Journal of Construction Education and Research, 10(4), pp. 268-284. ISSN 1557-8771

Cargnelutti, Dejan (2025) 4IR technologies within germany’s construction sector to meet fire protection standards and international climate objectives: A multiple-case study. PhD thesis, European Institute of Management, Malta.

Carter, D J (2008) Tubular guidance systems for daylight: UK case studies. Building Research & Information, 36(5), pp. 520-535. ISSN 0961-3218

Chalker, M and Loosemore, M (2016) Trust and productivity in Australian construction projects: A subcontractor perspective. Engineering, Construction and Architectural Management, 23(2), pp. 192-210. ISSN 0969-9988

Chan, I Y S and Liu, A M M (2012) Antecedents of innovation climate in construction firms in Hong Kong. International Journal of Construction Management, 12(4), pp. 37-46. ISSN 1562-3599

Chan, K C G (2012) The use of virtual reality for visualizing construction safety management process. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chan, K Y (2012) Optimizing construction planning and scheduling by virtual prototyping enabled resource analysis. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chan, Man-Yin Ede (2018) Enablers for knowledge management implementation by large construction organisations in Hong Kong. PhD thesis, Griffith University, Australia.

Chan, Y M T (2008) The role of finance in competitiveness of indigenous contractors in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chang, L M; Hancher, D E; Napier, T R and Kapolnek, R G (1988) Methods to identify and assess new building technology. Journal of Construction Engineering and Management, 114(3), pp. 408-425. ISSN 0733-9364

Chang, V; Xu, Y K; Zhang, J and Xu, Q (2021) Research on intelligent manufacturing development approach for China's local valve industry. Smart and Sustainable Built Environment, 10(2), pp. 293-321. ISSN 2046-6099

Chao, C-H (2001) Formulation of an e -business inter-enterprise collaboration for the construction industry. PhD thesis, Northwestern University, USA.

Chao, L C and Skibniewski, M J (1995) Neural network method of estimating construction technology acceptability. Journal of Construction Engineering and Management, 121(1), pp. 130-142. ISSN 0733-9364

Chao, L C and Skibniewski, M J (1998) Fuzzy logic for evaluating alternative construction technology. Journal of Construction Engineering and Management, 124(4), pp. 297-304. ISSN 0733-9364

Chao, L-C (1994) An adaptive approach to evaluation of implementation prospects of new construction technologies. PhD thesis, Purdue University, USA.

Charles, S H; Chang-Richards, A and Yiu, T W (2022) New success factors for construction projects: A systematic review of post-2004 literature. Construction Innovation, 22(4), pp. 891-914. ISSN 1471-4175

Chau, K W; Poon, S W; Wang, Y S and Lu, L L (2005) Technological progress and the productive efficiency of construction firms in Hong Kong, 1981-2001. Journal of Construction Research, 6(2), pp. 195-207. ISSN 1609-9451

Che Wan Putra, C W F (1998) CAPE construction application protocol for data transfer: a building data model. PhD thesis, University of Salford, UK.

Chellappa, V and Luximon, Y (2026) Computer-aided technologies for posture-based ergonomic risk assessment in construction: A systematic review. International Journal of Construction Management, 26(2), pp. 316-331. ISSN 1562-3599

Chen, B; Yu, X; Dong, F; Zheng, C; Ding, G and Wu, W (2021) Compaction quality evaluation of asphalt pavement based on intelligent compaction technology. Journal of Construction Engineering and Management, 147(9): 04021099, ISSN 0733-9364

Chen, C (2019) Heterogeneous integration of BIM with low-cost indoor mobile laser scanning method for building fabric maintenance in China. PhD thesis, University of Nottingham, UK.

Chen, H-Y; Chang, Y-M and Chang, H-C (2016) A numerical definition-based systematic design approach for coupling consumers' image perception with product form. Journal of Engineering, Design and Technology, 14(1), pp. 134-159.

Chen, K; Loo, S C and Alias, A (2024) A bibliometric review of maturity model studies in the construction industry. Journal of Construction in Developing Countries, 29(2), pp. 129-145. ISSN 1823-6499

Chen, S (2013) Scheduling, contracting, and capacity planning in project-based supply chains. PhD thesis, Stanford University, USA.

Chen, X; Chang-Richards, A Y; Pelosi, A; Jia, Y; Shen, X; Siddiqui, M K and Yang, N (2022) Implementation of technologies in the construction industry: A systematic review. Engineering, Construction and Architectural Management, 29(8), pp. 3181-3209. ISSN 0969-9988

Chen, Y (2008) Using mobile computing for construction site information management. PhD thesis, University of Newcastle upon Tyne, UK.

Chen, Y and Ding, C (2024) Multidimensional evolutionary analysis of China's BIM technology policy based on quantitative mapping. Architectural Engineering and Design Management, 20(3), pp. 578-595. ISSN 1745-2007

Chen, Y and Kamara, J M (2008) Using mobile computing for construction site information management. Engineering, Construction and Architectural Management, 15(1), pp. 7-20. ISSN 0969-9988

Cheng, M.; Chong, H. Y.; Xu, Y.; Chi, M. and Liu, G. (2026) Dynamic interplay for blockchain-smart contracts (sc) adoption among government, private owners and general contractors across stages of contract development. Engineering, Construction and Architectural Management, 33(7), pp. 5445-5468. ISSN 0969-9988

Cheng, M Y; Vu, Q T and Wu, T C (2026) Highway bridge crack inspection verification and training using an automated augmented reality system. Journal of Construction Engineering and Management, 152(3): 04025279, ISSN 0733-9364

Chesworth, B; London, K and Gajendran, T (2011) Understanding lean implementation: Perspectives and approaches of an American construction organisation. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Chi, J D (2022) Cross-industry adoption and sustainability practices in facility management. PhD thesis, University of Maryland, USA.

Chileshe, N and Kavishe, N (2021) Readiness assessment of public-private partnerships adoption in developing countries: The case of Tanzania. Built Environment Project and Asset Management, 11(1), pp. 71-87. ISSN 2044-124X

Choong, Yi (2006) A mapping approach to investigating information and communication technology implementation during the building design process. PhD thesis, RMIT University, Australia.

Chowdary, B V and Jaglal, D (2023) 3D CAD model reconstruction and fast prototyping of rotational parts: A reverse engineering approach. Journal of Engineering, Design and Technology, 21(5), pp. 1520-1544. ISSN 1726-0531

Chun, C K; Li, H and Skitmore, M (2012) The use of virtual prototyping for hazard identification in the early design stage. Construction Innovation, 12(1), pp. 29-42. ISSN 1471-4175

Chunekar, A and Sreenivas, A (2019) Towards an understanding of residential electricity consumption in India. Building Research & Information, 47(1), pp. 75-90. ISSN 0961-3218

Chung, J K H; Shen, G Q P; Leung, B Y P; Hao, J J L; Hills, M J; Fox, P W and Zou, P X W (2005) Using e-learning to deliver construction technology for undergraduate students. A case study in Hong Kong. Architectural Engineering and Design Management, 1(4), pp. 295-308. ISSN 1745-2007

Codarin, Sara (2020) Innovative construction systems within building processes: An approach to large-scale robotic additive layer manufacturing for the conservation of cultural heritage. PhD thesis, University of Ferrara, Italy.

Coenen, T B J; Volker, L and Visscher, K (2021) Introducing circular innovation in the construction industry: The case of the circular viaduct. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Cooke, R S (2006) The use of alternative energy technologies in buildings: the influence of engineering consultants. EngD thesis, Brunel University, UK.

Cooke, T (2013) Can knowledge sharing mitigate the effect of construction project complexity? Construction Innovation, 13(1), pp. 5-9. ISSN 1471-4175

Crolla, Kristof (2018) Building simplexity: The 'more or less' of post-digital architecture practice. PhD thesis, RMIT University, Australia.

Dakhli, Z and Lafhaj, Z (2017) Experimental and numerical prototyping of a complex cement column formwork for construction. Architectural Engineering and Design Management, 13(2), pp. 147-165. ISSN 1745-2007

Dallasega, P; Schulze, F and Revolti, A (2023) Augmented reality to overcome visual management implementation barriers in construction: A mep case study. Construction Management and Economics, 41(3), pp. 232-255. ISSN 01446193

Daniel, E I; Nwankwo, N; Adah, C; Oshodi, O; Emuze, F; Chinyio, E and Umeokafor, N (2026) An exploratory study into UK construction industry response to digitalised health and safety management. Journal of Engineering, Design and Technology, 24(1), pp. 45-63. ISSN 1726-0531

Danso, A. K.; Edwards, D. J.; Adjei, E. K.; Adjei-Kumi, T.; Owusu-Manu, D. G.; Fianoo, S. I. and Thwala, W. D. (2026) Analysis of the underlying factors affecting BIM-LCA integration in the Ghanaian construction industry: A factor analysis approach. Construction Innovation, 26(3), pp. 871-891. ISSN 1471-4175

Dardouri, S; BuHamdan, S; Al Balkhy, W; Dakhli, Z; Danel, T and Lafhaj, Z (2023) RFID platform for construction materials management. International Journal of Construction Management, 23(14), pp. 2509-2519. ISSN 1562-3599

Das, P; Perera, S; Senaratne, S and Osei-Kyei, R (2023) Paving the way for industry 4.0 maturity of construction enterprises: A state of the art review. Engineering, Construction and Architectural Management, 30(10), pp. 4665-4694. ISSN 0969-9988

David, L O; Nwulu, N I; Aigbavboa, C O and Adepoju, O O (2025) Resource sustainability in the water, energy and food nexus: Role of technological innovation. Journal of Engineering, Design and Technology, 23(3), pp. 725-743. ISSN 1726-0531

Davidson, R (2021) Innovation within private finance initiative projects: the influence of governance throughout the first stage of post-contract implementation. PhD thesis, University of Brighton, UK.

Davies, G (2012) The impact of organisational culture, learning and knowledge development on performance. DBA thesis, Kingston University, UK.

Davies, R J (2003) Formulating competitive strategy in the UK housebuilding industry: Executive summary. EngD thesis, University of Warwick, UK.

Davis, K A (2004) Information technology change in the architecture, engineering, and construction industry: An investigation of individuals' resistance. PhD thesis, Virginia Tech, USA.

Davis, K A and Songer, A D (2009) Resistance to IT change in the AEC industry: Are the stereotypes true? Journal of Construction Engineering and Management, 135(12), pp. 1324-1333. ISSN 0733-9364

Day, A (1996) The maquette, the model and the computer: Organizational futures for design and construction. Engineering, Construction and Architectural Management, 3(1-2), pp. 15-28. ISSN 0969-9988

Dayan, V; Chileshe, N and Hassanli, R (2022) A scoping review of information-modeling development in bridge management systems. Journal of Construction Engineering and Management, 148(9): 03122006, ISSN 0733-9364

De Dear, R (2011) Revisiting an old hypothesis of human thermal perception: Alliesthesia. Building Research & Information, 39(2), pp. 108-117. ISSN 0961-3218

De La Fuente, A; Casanovas-Rubio, M D M; Pons, O and Armengou, J (2019) Sustainability of column-supported RC slabs: Fiber reinforcement as an alternative. Journal of Construction Engineering and Management, 145(7): 04019042, ISSN 0733-9364

De La Garza, J M and Mitropoulos, P (1991) Technology-transfer (t2) model for expert systems. Journal of Construction Engineering and Management, 117(4), pp. 736-755. ISSN 0733-9364

De Toldi, T and Pestre, T (2023) The relevance of cut-stone to strategies for low-carbon buildings. Buildings & Cities, 4(1), pp. 229-257. ISSN 2632-6655

Dean, W E (1992) Earthquakes and old buildings: Seismic risk permits for California structures. PhD thesis, RAND Graduate School, USA.

Den Otter, A and Emmitt, S (2007) Exploring effectiveness of team communication: Balancing synchronous and asynchronous communication in design teams. Engineering, Construction and Architectural Management, 14(5), pp. 408-419. ISSN 0969-9988

Dey, A; Islam, S T; Paul, B; Bandyopadhyay, S; Sengupta, P; Sanyal, N; Mondal, K P; Jubaer, A and Mitra, R (2022) Waterlogging mitigation and safe water supply: Lessons learnt from low-lying areas of basirhat municipality, India. International Journal of Disaster Resilience in the Built Environment, 13(3), pp. 386-403. ISSN 1759-5916

Diab, A A (2009) Risk management of building services modularisation: Knowledge management perspective. PhD thesis, University of Manchester, UK.

Diaz Schery, C A; Caiado, R G G; Aguilar Vargas, S and Rodriguez Vignon, Y (2025) Paths to BIM-based digital transformation: A bibliometric and systematic review of critical factors. Engineering, Construction and Architectural Management, 32(7), pp. 4357-4383. ISSN 0969-9988

Dixit, A; Chauhan, R and Shaw, R (2025) Application of smart systems and emerging technologies for disaster risk reduction and management in Nepal. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 328-343. ISSN 1759-5908

Dixit, S; Stefańska, A and Singh, P (2023) Manufacturing technology in terms of digital fabrication of contemporary biomimetic structures. International Journal of Construction Management, 23(11), pp. 1828-1836. ISSN 1562-3599

Dixon, T J (1994) An analysis of IT skills training and education in the surveying profession. PhD thesis, University of Reading, UK.

Doan, D. T.; Albsoul, H.; Shobha, A. R.; GhaffarianHoseini, A. and Ghaffarianhoseini, A. (2026) An integrated challenge-strategy framework for construction waste management in New Zealand: Behavioural and organisational challenges and strategies. Engineering, Construction and Architectural Management, pp. 1-22. ISSN 0969-9988

Dobrucali, E; Demirkesen, S; Sadikoglu, E; Zhang, C and Damci, A (2024) Investigating the impact of emerging technologies on construction safety performance. Engineering, Construction and Architectural Management, 31(3), pp. 1322-1347. ISSN 0969-9988

Domdouzis, K (2007) Applications of wireless sensor technologies in construction. PhD thesis, Loughborough University, UK.

Domdouzis, K; Anumba, C and Thorpe, A (2004) Wireless sensor networking in the construction industry: Prospects and problems. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Domingo, L (2023) Influence of method and media interventions in creative remote design team collaboration. PhD thesis, Stanford University, USA.

Dominguez, D (2008) Handling future uncertainty: Strategic planning for the infrastructure sector. DSc thesis, ETH Zürich, Switzerland.

Dong, Y; Hu, Y; Cai, J; Xu, X and Li, S (2025) Improving construction workforce entry by examining construction equipment operators' employment practices. Journal of Construction Engineering and Management, 151(10): 04025138, ISSN 0733-9364

Dorée, A and Miller, S (2008) Is technology a new challenge for the field of construction management? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Dorée, A G and Holmen, E (2004) Achieving the unlikely: Innovating in the loosely coupled construction system. Construction Management and Economics, 22(8), pp. 827-838. ISSN 01446193

Dossick, C; Osburn, L and Neff, G (2025) Innovation through practice: The messy work of making technology useful for architecture, engineering and construction teams. Engineering, Construction and Architectural Management, 32(7), pp. 4887-4899. ISSN 0969-9988

Dossick, C S and Sakagami, M (2008) Implementing web-based project management systems in the United States and Japan. Journal of Construction Engineering and Management, 134(3), pp. 189-196. ISSN 0733-9364

Dou, Y; Yan, X; Dong, B; Zhong, L and Lin, H (2026) Predicting the interorganizational diffusion of prefabricated construction technology: Agent-based modeling and simulation. Journal of Construction Engineering and Management, 152(3): 04025266, ISSN 0733-9364

Dou, Y; Li, T; Li, L; Zhang, Y and Li, Z (2023) Tracking the research on ten emerging digital technologies in the AECO industry. Journal of Construction Engineering and Management, 149(3): 03123003, ISSN 0733-9364

Downey, M (2012) Lowering CO2 emissions in the new build social housing sector: A Spanish case study. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Dowsett, R; Harty, C and Davies, R (2017) Epistemological differences and new technology in construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Dowsett, R M; Green, M S and Harty, C F (2022) Speculation beyond technology: Building scenarios through storytelling. Buildings & Cities, 3(1), pp. 534-553. ISSN 2632-6655

Duarte, Carolina Mendonça de Moraes (2022) Innovation management in construction and development companies. PhD thesis, Universidade Estadual de Campinas, Brazil.

Dunston, P S; Sinfield, J V and Lee, T Y (2007) Technology development decision economics for real-time rolling resistance monitoring of haul roads. Journal of Construction Engineering and Management, 133(5), pp. 393-402. ISSN 0733-9364

Duyshart, B; Walker, D; Mohamed, S and Hampson, K (2003) An example of developing a business model for information and communication technologies (ICT) adoption on construction projects: the national museum of Australia project. Engineering, Construction and Architectural Management, 10(3), pp. 179-192. ISSN 0969-9988

Edirisinghe, R and Gunathilake, L (2025) IoT-based smart vest for heat stress management in construction. International Journal of Construction Management, 25(16), pp. 2137-2149. ISSN 1562-3599

Edirisinghe, R; Lingard, H and Broadhurst, D (2015) Exploring the potential for using video to communicate safety information to construction workers: Case studies of organisational use. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Edwards, D; Parn, E A; Sing, M C P and Thwala, W D (2019) Risk of excavators overturning: Determining horizontal centrifugal force when slewing freely suspended loads. Engineering, Construction and Architectural Management, 26(3), pp. 479-498. ISSN 0969-9988

Eksteen, B and Krause, S (2002) Constructing new automotive production facilities in a mature brownfield site. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

El Tayeh, A (2008) Social web-based systems for supporting geographically dispersed project teams in the architecture-engineering-construction industry. PhD thesis, University of Manchester, UK.

Eliwa, H K; Jelodar, M B; Poshdar, M and Zavvari, A (2024) Organizational infrastructure and information and communication technology infrastructure alignment in construction organizations. Journal of Construction Engineering and Management, 150(7): 04024057, ISSN 0733-9364

Elliman, T and Orange, G (2003) Developing distributed design capabilities in the construction supply chain. Construction Innovation, 3(1), pp. 15-26. ISSN 1471-4175

Elmisalami, T; Walters, R and Jaselskis, E J (2006) Construction IT decision making using multiattribute utility theory for use in a laboratory information management system. Journal of Construction Engineering and Management, 132(12), pp. 1275-1283. ISSN 0733-9364

Elmualim, A and Gilder, J (2014) BIM: Innovation in design management, influence and challenges of implementation. Architectural Engineering and Design Management, 10(3-4), pp. 183-199. ISSN 1745-2007

Emam, H (2021) Optimising project controls for construction using BIM and Big Data Analytics. PhD thesis, University of Bolton, UK.

Ensar, A and Selin, G (2021) Individual and organisational level drivers and barriers to building information modelling. Journal of Construction in Developing Countries, 26(1), pp. 89-109. ISSN 1823-6499

Erbil, Y; Akincitürk, N and Acar, E (2013) Inter-organizational context of the innovation process and the role of architectural designers as system integrators: Case evidence from Turkey. Architectural Engineering and Design Management, 9(2), pp. 77-94. ISSN 1745-2007

Erdogan, B (2008) Organisational change management for the implementation of collaboration environments. PhD thesis, Loughborough University, UK.

Eriqat, M O; Sweis, R J and Sweis, G J (2025) The challenges of adopting emerging technologies in the AEC industry a literature review and bibliometric analysis. Construction Innovation, 25(6), pp. 1680-1706. ISSN 1471-4175

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. I: Analysis at the fundamental level. Journal of Construction Engineering and Management, 141(8): 04015021, ISSN 0733-9364

Etemadi, Ramtin (2019) Adoption of social media for professional knowledge sharing by construction professionals in Australia. PhD thesis, Queensland University of Technology, Australia.

Everett, J G (1991) Construction automation: Basic task selection and development of the cranium. PhD thesis, Massachusetts Institute of Technology, USA.

Everett, J G and Slocum, A H (1994) Automation and robotics opportunities: Construction versus manufacturing. Journal of Construction Engineering and Management, 120(2), pp. 443-452. ISSN 0733-9364

Ezcan, V; Goulding, J S and Arif, M (2020) Redefining ICT embeddedness in the construction industry: Maximizing technology diffusion capabilities to support agility. Building Research & Information, 48(8), pp. 922-944. ISSN 0961-3218

Famakin, I O; Moyanga, D T and Agboola, A A (2024) Effect of innovative practices on the growth of quantity surveying firms in Nigeria. Journal of Engineering, Design and Technology, 22(6), pp. 1723-1741. ISSN 1726-0531

Fan, C; Binchao, D and Yin, Y (2023) Hierarchical structure and transfer mechanism to assess the scheduling-related risk in construction of prefabricated buildings: An integrated ISM–MICMAC approach. Engineering, Construction and Architectural Management, 30(7), pp. 2991-3013. ISSN 0969-9988

Fang, Y and Gao, S (2026) Construction 4.0 technology and lean construction ambidexterity capability in China's construction industry: A sociotechnical systems perspective. Construction Innovation, 26(3), pp. 653-673. ISSN 1471-4175

Fang, Y and Cho, Y K (2017) Effectiveness analysis from a cognitive perspective for a real-time safety assistance system for mobile crane lifting operations. Journal of Construction Engineering and Management, 143(4): 05016025, ISSN 0733-9364

Faraj, I (2003) Geometric verification of design. Engineering, Construction and Architectural Management, 10(1), pp. 56-70. ISSN 0969-9988

Farghaly, K (2020) Building information modelling and asset management: Semantic and syntactic interoperability. PhD thesis, Oxford Brookes University, UK.

Farghaly, K; Abanda, F H; Vidalakis, C and Wood, G (2019) BIM-linked data integration for asset management. Built Environment Project and Asset Management, 9(4), pp. 489-502. ISSN 2044-124X

Farzin, A; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Fathi, M S (2009) Micro- and macro-level context-aware information delivery for construction programme managers. PhD thesis, Loughborough University, UK.

Feldbauer, R R (2019) Mindful project management: a framework to enhance underperformance managing large hospital builds by incorporating principles adapted from High Reliability Organizations. PhD thesis, University of Liverpool, UK.

Feng, X; Ahmed, V and Mahdjoubi, L (2003) Spatial visualization of building components. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Fernando, L. S.; Kulatunga, U.; Ranadewa, T. and Keraminiyage, K. P. (2026) Accelerating disaster recovery: An agile approach to enhancing community disaster resilience. International Journal of Disaster Resilience in the Built Environment, 17(2), pp. 181-202. ISSN 1759-5908

Fialho, Beatriz Campos (2021) Design for smart maintenance enabled by BIM and IoT. PhD thesis, Universidade de São Paulo, Brazil.

Fitch, G J (2019) System dynamics models for the valuation of real options in infrastructure investments. PhD thesis, Columbia University, USA.

Fletcher, S L (2001) Developing disassembly strategies for buildings to reduce the lifetime environmental impacts by applying a systems approach. PhD thesis, University of Sheffield, UK.

Fong, Patrick Sik-wah (2001) Understanding knowledge creation: A study of the processes, interrelationships and contributory factors within multidisciplinary project teams. PhD thesis, University of Warwick, UK.

Forsythe, P J (2012) Profiling customer perceived service quality expectations in made-to-order housing construction in Australia. Engineering, Construction and Architectural Management, 19(6), pp. 587-609. ISSN 0969-9988

Forsythe, Perry (2003) The role of service quality as a determinant of customer satisfaction in residential construction. PhD thesis, University of New South Wales, Australia.

Fosas, D; Moran, F; Natarajan, S; Orr, J and Coley, D (2020) The importance of thermal modelling and prototyping in shelter design. Building Research & Information, 48(4), pp. 379-400. ISSN 0961-3218

Foskett, F. and Alwisy, A. (2026) Socio-industrial analysis of cross-sector robotics adoption obstacles for light-gauge steel construction. Engineering, Construction and Architectural Management, pp. 1-40. ISSN 0969-9988

Foskett, F. and Alwisy, A. (2026) Socio-industrial analysis of cross-sector robotics adoption obstacles for light-gauge steel construction. Engineering, Construction and Architectural Management, pp. 1-40. ISSN 0969-9988

Fouchal, F; Ellis, K; Hassan, T and Firth, S (2013) ICT-enabled energy efficiency: a lens onto practices of other sectors. Smart and Sustainable Built Environment, 2(2), pp. 158-178. ISSN 2046-6099

Fouchal, F; Hassan, T M and Loveday, D L (2014) Design methodology for integrating multipath systems (building services). Journal of Engineering, Design and Technology, 12(4), pp. 491-506.

Foulds, C (2013) Practices and technological change: the unintended consequences of low energy dwelling design. PhD thesis, University of East Anglia, UK.

Froese, T M (1992) Integrated computer-aided project management through standard object-oriented models. PhD thesis, Stanford University, USA.

Frutos, J D and Borenstein, D (2003) Object-oriented model for customer-building company interaction in mass customization environment. Journal of Construction Engineering and Management, 129(3), pp. 302-313. ISSN 0733-9364

Gabai, D S; Haronian, E; Sacks, R; Kennard, N S; Wong, N; Miera, M K and Cloyd, T D (2026) Doubling throughput and halving project durations: Lessons from intel's ocf strategy for project portfolio management. Journal of Construction Engineering and Management, 152(2): 04025256, ISSN 0733-9364

Gajendran, T and Brewer, G (2012) Cultural consciousness and the effective implementation of information and communication technology. Construction Innovation, 12(2), pp. 179-197. ISSN 1471-4175

Gamil, Y and Abdul Rahman, I (2019) Awareness and challenges of building information modelling (BIM) implementation in the Yemen construction industry. Journal of Engineering, Design and Technology, 17(5), pp. 1077-1084. ISSN 1726-0531

Ganah, A A M (2003) Computer visualisation support for buildability. PhD thesis, Loughborough University, UK.

Gangatheepan, S (2023) Workplace-based learning: a study in BIM-enabled construction projects. PhD thesis, Birmingham City University, UK.

Gann, D and Senker, P (1998) Construction skills training for the next millennium. Construction Management and Economics, 16(5), pp. 569-580. ISSN 01446193

Gao, J; Ren, H; Ma, X; Cai, W and Shi, Q (2019) A total energy efficiency evaluation framework based on embodied energy for the construction industry and the spatio-temporal evolution analysis. Engineering, Construction and Architectural Management, 26(8), pp. 1652-1671. ISSN 0969-9988

Gao, Y; Casasayas, O; Wang, J and Xu, X (2023) Factors affecting the blockchain application in construction management in China: An ANP-SWOT hybrid approach. Architectural Engineering and Design Management, 19(6), pp. 665-680. ISSN 1745-2007

Garba, A; Kishk, M and Moore, D R (2016) A comparative study of biomass energy technologies for sustainable electricity in Nigerian rural areas. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

García de Soto, D B; Streule, T; Klippel, M; Bartlomé, O and Adey, B T (2020) Improving the planning and design phases of construction projects by using a case-based digital building system. International Journal of Construction Management, 20(8), pp. 900-911. ISSN 1562-3599

Georgekutty, C K (2014) Optimization of construction cost in construction materials. Unpublished PhD thesis, Cochin University of Science and Technology, India.

Georgiou, A; Haritos, G; Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(1), pp. 115-133.

Ghanbari, A (2006) Model-based integrated total project management systems, with an emphasis on materials management. PhD thesis, University of British Columbia, Canada.

Ghanem, A (2007) Real-time construction project progress tracking: A hybrid model for wireless technologies selection, assessment, and implementation. PhD thesis, Florida State University, USA.

Ghansah, F A; De-Graft, O-M and Ayarkwa, J (2021) Project management processes in the adoption of smart building technologies: A systematic review of constraints. Smart and Sustainable Built Environment, 10(2), pp. 208-226. ISSN 2046-6099

Ghansah, F A; Lu, W and Ababio, B K (2024) Modelling the critical challenges of quality assurance of cross-border construction logistics and supply chain during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 31(5), pp. 2128-2150. ISSN 0969-9988

Ghosh, A; Edwards, D J; Hosseini, M R; Al-Ameri, R; Abawajy, J and Thwala, W D (2021) Real-time structural health monitoring for concrete beams: A cost-effective 'industry 4.0' solution using piezo sensors. International Journal of Building Pathology and Adaptation, 39(2), pp. 283-311. ISSN 23984708

Ghosh, A; Jha, S K and Hasan, A (2022) A scientometric review of technological applications in occupational health and safety management in the construction industry. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Gibb, A G F and Isack, F (2003) Re-engineering through pre-assembly: Client expectations and drivers. Building Research & Information, 31(2), pp. 146-160. ISSN 0961-3218

Gil, N and Kahn, H (2004) Intelligent construction components for integrating product design, delivery process, and life-cycle performance. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Gil, N and Tommelein, I D (2003) Using product and process flexibility to cope with project delivery uncertainty. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Gill, N; Tommelein, I D; Stout, A and Garrett, T (2005) Embodying product and process flexibility to cope with challenging project deliveries. Journal of Construction Engineering and Management, 131(4), pp. 439-448. ISSN 0733-9364

Ginigaddara, Buddhini (2022) Developing a skill profile prediction model for typologies of offsite construction. PhD thesis, Western Sydney University, Australia.

Giritli, H; Sozen, Z; Flanagan, R and Lansley, P (1990) International contracting: A Turkish perspective. Construction Management and Economics, 8(4), pp. 415-430. ISSN 01446193

Gkiourka, P; Tutesigensi, A and Moodley, K (2010) A holistic conceptual model for managing innovation. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Glatte, T (2015) Location strategies: Methods and their methodological limitations. Journal of Engineering, Design and Technology, 13(3), pp. 435-462.

Gleeson, C P (2016) Residential heat pump installations: The role of vocational education and training. Building Research & Information, 44(4), pp. 394-406. ISSN 0961-3218

Glick, S; Leed, A P; Guggemos, A A and Price, J (2011) Increasing resource efficiency through residential greywater use. International Journal of Construction Education and Research, 7(1), pp. 41-57. ISSN 1557-8771

Globa, A; Costin, G; Tokede, O; Wang, R; Khoo, C K and Moloney, J (2022) Hybrid kinetic facade: Fabrication and feasibility evaluation of full-scale prototypes. Architectural Engineering and Design Management, 18(6), pp. 791-811. ISSN 1745-2007

Gluch, P and Svensson, I (2016) The organizational nexus of changing management practices for sustainable renovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Gomez, C P (2006) Reconceptualizing the management of technology in construction: A Malaysian perspective. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Gong, Z and Wang, N (2022) The driving process of technological innovation in construction: A firm-level cdm analysis. Construction Innovation, 22(2), pp. 222-241. ISSN 1471-4175

Gonzalez, Alvaro Eduardo (2016) Organisational design & mirroring in construction. MPhil thesis, University of Sydney, Australia.

Goodrum, P M; Haas, C T; Caldas, C; Zhai, D; Yeiser, J and Homm, D (2011) Model to predict the impact of a technology on construction productivity. Journal of Construction Engineering and Management, 137(9), pp. 678-688. ISSN 0733-9364

Goodrum, P M; Zhai, D and Yasin, M F (2009) Relationship between changes in material technology and construction productivity. Journal of Construction Engineering and Management, 135(4), pp. 278-287. ISSN 0733-9364

Gorse, C; Dickinson, I; Walker, C; Whitehead, P and Shepherd, T (2009) Virtual maths: Contextualised learning with new and emerging technologies. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Goswami, M; Singh, J and Kumar, V (2016) An enterprise based decision support system for engineering aggregate selection: A case study. Journal of Engineering, Design and Technology, 14(4), pp. 851-873.

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Goulding, J; Sexton, M; Zhang, X; Kagioglou, M; Aouad, G F and Barrett, P (2007) Technology adoption: Breaking down barriers using a virtual reality design support tool for hybrid concrete. Construction Management and Economics, 25(12), pp. 1239-1250. ISSN 1466433X

Gowthaman, M; Gamage, I and Karunaratne, T (2025) Framework for managing deficiencies and inefficiencies in quantity surveying-related software implementation. Construction Economics and Building, 25(2), pp. 192-214. ISSN 2204-9029

Grabham, S and Manu, E (2022) Diffusion of platform thinking as an innovation in the construction supply chain. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(3), pp. 119-130. ISSN 17514304

Gradeci, K and Labonnote, N (2020) On the potential of integrating building information modelling (BIM) for the additive manufacturing (AM) of concrete structures. Construction Innovation, 20(3), pp. 321-343. ISSN 1471-4175

Graham, B and Thomas, K (2005) An investigation into the development of knowledge management systems within the leading Irish construction companies. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Graham, J (2018) Governance of systems of social practice for sustainability: Developing a reflexive systems of practice approach for governance of sustainability. PhD thesis, University of East Anglia, UK.

Graser, Konrad (2023) From invention to innovation: Socio-technical processes in the adoption of digital fabrication to architecture, engineering and construction praxis. PhD thesis, ETH Zürich, Switzerland.

Gravina da Rocha, C; Korb, S and Sacks, R (2022) Work structuring and product design for customized repetitive projects. Construction Management and Economics, 40(7-8), pp. 526-547. ISSN 01446193

Greenhalgh, S (2016) The effects of 3D printing in design thinking and design education. Journal of Engineering, Design and Technology, 14(4), pp. 752-769.

Grist, E (2014) The implementation of innovative and sustainable construction materials. EngD thesis, University of Bath, UK.

Gudem, M; Steinert, M; Welo, T and Leifer, L (2013) Redefining customer value in lean product development design projects. Journal of Engineering, Design and Technology, 11(1), pp. 71-89. ISSN 1726-0531

Guerin, T F (2025) Perceptions of volume home builders and the transition to net zero emissions housing in Australia. Building Research & Information, 53(3), pp. 323-344. ISSN 0961-3218

Gunasekara, H G and Sridarran, P (2021) Barriers in blockchain technology adoption for facilities management procurement process in Sri Lanka. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Gunaydin, H M (1999) Impact of information technologies on project management functions. PhD thesis, Illinois Institute of Technology, USA.

Guo, Z; Wang, Q; Cao, X and Wang, Z (2026) Navigating BIM technological innovations for megaprojects: Insights from the toce framework. Journal of Construction Engineering and Management, 152(1): 04025235, ISSN 0733-9364

Guo, Z.; Wang, Q.; Jing, H. and Gao, Q. (2026) How to promote the technological innovation cooperation in mega construction projects at the project level? Engineering, Construction and Architectural Management, 33(5), pp. 3657-3681. ISSN 0969-9988

Guo, H (2009) Rethinking construction project management using the VP-based manufacturing management model. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Guo, Y; Su, Y; Chen, C and Martek, I (2024) Inclusion of "managing flexibility" valuations in the pricing of PPP projects: A multi-objective decision-making method. Engineering, Construction and Architectural Management, 31(11), pp. 4562-4584. ISSN 0969-9988

Gupta, S; Jha, K N and Vyas, G (2022) Proposing building information modeling-based theoretical framework for construction and demolition waste management: Strategies and tools. International Journal of Construction Management, 22(12), pp. 2345-2355. ISSN 1562-3599

Guribie, F L; Kheni, N A and Sule, M (2022) Structural equation modeling of the critical driving forces of offsite construction in Ghana. Built Environment Project and Asset Management, 12(4), pp. 667-683. ISSN 2044-124X

Guven, G and Ergen, E (2021) Tracking major resources for automated progress monitoring of construction activities: Masonry work case. Construction Innovation, 21(4), pp. 648-667. ISSN 1471-4175

Günay, G (2025) Development of standards for modular construction: Learning from the freight container. PhD thesis, Middle East Technical University, Turkey.

Habibi, S (2020) A review of ICT-based applications to monitor environmental parameters. Construction Innovation, 20(1), pp. 112-127. ISSN 1471-4175

Habtu, T. M.; A. Elsaigh, W. and Musonda, I. (2026) Toward a strategic framework for AI-BIM adoption in Ethiopian road infrastructure management. Engineering, Construction and Architectural Management, 33(15), pp. 564-589. ISSN 0969-9988

Hadi, A; Cheung, F; Adjei, S and Dulaimi, A (2023) Evaluation of lean off-site construction literature through the lens of industry 4.0 and 5.0. Journal of Construction Engineering and Management, 149(12): 03123007, ISSN 0733-9364

Hadikusumo, B H W (2001) Virtually real construction site processes: hazard identification and accident precaution planning using design-for-safety-process (DFSP) tool. PhD thesis, University of Hong Kong, Hong Kong.

Haghighi, Z (2022) Architectural photovoltaic application. PhD thesis, Delft University of Technology, Netherlands.

Hajirasouli, A; Banihashemi, S; Drogemuller, R; Fazeli, A and Mohandes, S R (2022) Augmented reality in design and construction: Thematic analysis and conceptual frameworks. Construction Innovation, 22(3), pp. 412-443. ISSN 1471-4175

Hajirasouli, A; Banihashemi, S; Sanders, P and Rahimian, F (2024) BIM-enabled virtual reality (VR)-based pedagogical framework in architectural design studios. Smart and Sustainable Built Environment, 13(6), pp. 1490-1510. ISSN 2046-6099

Hamilton, E M (2018) Positive sustainable built environments: The cognitive and behavioral affordances of environmentally responsible behavior in green residence halls. PhD thesis, University of Michigan, USA.

Hamurcu, A; Timur, Ş and Rızvanoğlu, K (2020) An overview of virtual reality within industrial design education. Journal of Engineering, Design and Technology, 18(6), pp. 1889-1905. ISSN 1726-0531

Han, B and Leite, F (2021) Measuring the impact of immersive virtual reality on construction design review applications: Head-mounted display versus desktop monitor. Journal of Construction Engineering and Management, 147(6): 04021042, ISSN 0733-9364

Han, Bing (2022) Implementing virtual reality-based design review in the construction industry. PhD thesis, University of Texas at Austin, USA.

Han, S (2005) Application modeling of the conventional and the GPS-based earthmoving systems. PhD thesis, Purdue University, USA.

Hannus, M; Luiten, G T; Watson, A S; Deguine, M; Sauce, G and Van Rijn, T P J (1999) ICT tools for improving the competitiveness of the LSE industry. Engineering, Construction and Architectural Management, 6(1), pp. 30-37. ISSN 0969-9988

Harajli, H A (2009) Cost-benefit analysis of microgenerators: An integrated appraisal perspective. PhD thesis, University of Bath, UK.

Hargreaves, T; Wilson, C and Hauxwell-Baldwin, R (2018) Learning to live in a smart home. Building Research & Information, 46(1), pp. 127-139. ISSN 0961-3218

Harinarain, N; Caluza, S and Dondolo, S (2021) Bricklaying robots in the South African construction industry: The contractor's perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Harkola, J (1995) Diffusion of construction technology: In a Japanese firm. PhD thesis, Stanford University, USA.

Haroglu, H (2010) Investigating the structural frame decision making process. EngD thesis, Loughborough University, UK.

Hartmann, A; Reymen, I M M J and Van Oosterom, G (2008) Factors constituting the innovation adoption environment of public clients. Building Research & Information, 36(5), pp. 436-449. ISSN 0961-3218

Hartmann, T (2011) Goal and process alignment during the implementation of decision support systems by project teams. Journal of Construction Engineering and Management, 137(12), pp. 1134-1141. ISSN 0733-9364

Hartmann, T; Gao, J and Fischer, M (2008) Areas of application for 3D and 4D models on construction projects. Journal of Construction Engineering and Management, 134(10), pp. 776-785. ISSN 0733-9364

Hartmann, T and Levitt, R E (2010) Understanding and managing three-dimensional/four-dimensional model implementations at the project team level. Journal of Construction Engineering and Management, 136(7), pp. 757-767. ISSN 0733-9364

Harty, C (2008) Implementing innovation in construction: Contexts, relative boundedness and actor-network theory. Construction Management and Economics, 26(10), pp. 1029-1041. ISSN 1466433X

Harty, C and Whyte, J (2010) Emerging hybrid practices in construction design work: Role of mixed media. Journal of Construction Engineering and Management, 136(4), pp. 468-476. ISSN 0733-9364

Hasan, A; Elmualim, A; Rameezdeen, R; Baroudi, B and Marshall, A (2018) An exploratory study on the impact of mobile ICT on productivity in construction projects. Built Environment Project and Asset Management, 8(3), pp. 320-332. ISSN 2044-124X

Hassan, T M; McCaffer, R O N and Thorpe, T (1999) Emerging clients' needs for large scale engineering projects. Engineering, Construction and Architectural Management, 6(1), pp. 21-29. ISSN 0969-9988

Hassan, Z (1997) CONPLAN: Construction planning and buildability evaluation in an integrated and intelligent construction environment. PhD thesis, University of Salford, UK.

Hatush, Z; Saleh, S and Shiki, A (2005) Effect of critical delay factors on cost: Overrun during the design stage. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Heaton, J (2020) Development of asset information requirements to support asset management. PhD thesis, University of Cambridge, UK.

Hemmati Farahani, M; Namazzadeh, M; Hemmati Farahani, A and Ataei, D (2023) Pathology and potential analysis of renewable energy use in Tehran municipal buildings. International Journal of Construction Management, 23(7), pp. 1174-1186. ISSN 1562-3599

Henderson, J R and Ruikar, K (2010) Technology implementation strategies for construction organisations. Engineering, Construction and Architectural Management, 17(3), pp. 309-327. ISSN 0969-9988

Hendrickse, C and Thurner, T W (2019) Design intervention at major technological installations: Investigating the ergonomics of the South African Large Telescope (SALT). Journal of Engineering, Design and Technology, 17(2), pp. 402-413. ISSN 1726-0531

Henriksen, H M (2023) From science to sales: Changing representations of zero emission housing. Buildings & Cities, 4(1), pp. 594-611. ISSN 2632-6655

Henriksen, T; Lo, S and Knaack, U (2016) The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled gfrc. Architectural Engineering and Design Management, 12(3), pp. 231-249. ISSN 1745-2007

Herbert, M (2000) Performance and the virtual team. PhD thesis, Loughborough University, UK.

Hernandez, W (2017) Development of a sustainable quality assurance program for transporation infrastructure. PhD thesis, University of Rhode Island, USA.

Hertin, J; Berkhout, F; Gann, D M and Barlow, J (2003) Climate change and the UK house building sector: Perceptions, impacts and adaptive capacity. Building Research & Information, 31(3-4), pp. 278-290. ISSN 0961-3218

Hijazi, A A; Das, P; Li, Y; Moehler, R C and Maxwell, D W (2026) A contingency approach to platform implementation: Platform types, attributes, and value chain integration. Building Research & Information, 54(1), pp. 4-23. ISSN 0961-3218

Hilal, M; Maqsood, T and Abdekhodaee, A (2019) A hybrid conceptual model for BIM in FM. Construction Innovation, 19(4), pp. 531-549. ISSN 1471-4175

Ho, C T T (2019) Application of optimization to the production planning of construction prefabrication supply chains. PhD thesis, University of Washington, USA.

Ho, S P and Liu, L Y (2003) How to evaluate and invest in emerging A/E/C technologies under uncertainty. Journal of Construction Engineering and Management, 129(1), pp. 16-24. ISSN 0733-9364

Hong, J; Akotia, J and Egbu, C (2024) Virtual reality in construction activities: Barriers for adoption in China. Construction Economics and Building, 24(1-2), pp. 77-93. ISSN 2204-9029

Hong, Y; Hammad, A; Zhong, X; Wang, B and Akbarnezhad, A (2020) Comparative modeling approach to capture the differences in BIM adoption decision-making process in Australia and China. Journal of Construction Engineering and Management, 146(2): 04019099, ISSN 0733-9364

Hopfe, C J (2009) Uncertainty and sensitivity analysis in building performance simulation for decision support and design optimization. PhD thesis, Eindhoven University of Technology, Netherlands.

Hopkin, T; Lu, S L; Rogers, P and Sexton, M G (2014) Placing defects at the heart of high quality new homes: The learning perspective. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Horgan, I (2014) The influence of an online collaboration tool on relationships in inter-organisational networks. PhD thesis, Victoria University, Australia.

Hossain, M M; Ahmed, S; Anam, S M A; Baxramovna, I A; Meem, T I; Sobuz, M H R and Haq, I (2025) BIM-based smart safety monitoring system using a mobile app: A case study in an ongoing construction site. Construction Innovation, 25(2), pp. 552-576. ISSN 1471-4175

Hosseini, M R; Chileshe, N; Zuo, J and Baroudi, B (2015) Adopting global virtual engineering teams in AEC projects: A qualitative meta-analysis of innovation diffusion studies. Construction Innovation, 15(2), pp. 151-179. ISSN 1471-4175

Hou, L; Tan, Y; Luo, W; Xu, S; Mao, C and Moon, S (2022) Towards a more extensive application of off-site construction: A technological review. International Journal of Construction Management, 22(11), pp. 2154-2165. ISSN 1562-3599

Hsu, Y (2017) Design-oriented strategy typology and innovation framework. Journal of Engineering, Design and Technology, 15(1), pp. 13-30.

Hu, X (2021) Sustainability perceptions of home modification service providers for older australians. Engineering, Construction and Architectural Management, 28(9), pp. 2754-2771. ISSN 0969-9988

Hu, Xiancun (2015) Construction industry performance measurement with carbon reduction. PhD thesis, Deakin University, Australia.

Hua, Y; Kang, F; Zhang, S and Li, J (2023) Impacts of task interdependence and equivocality on ICT adoption in the construction industry: A task-technology fit view. Architectural Engineering and Design Management, 19(1), pp. 92-109. ISSN 1745-2007

Hua, Y; Zhang, Y and Ma, P (2024) The mediating effect of BIM application on the link between organizational support and BIM user satisfaction. Architectural Engineering and Design Management, 20(3), pp. 636-655. ISSN 1745-2007

Huang, C; Fisher, N and Broyd, T (2002) Development of a triangular TPC model to support adoption of construction integrated system. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Huang, J-Y and Siao, S-T (2016) Development of an integrated bionic design system. Journal of Engineering, Design and Technology, 14(2), pp. 310-327.

Huang, T (2009) Virtual prototyping technologies enhanced construction planning. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Huang, T; li, H; Guo, H; Chan, N; Kong, S; Chan, G and Skitmore, M (2009) Construction virtual prototyping: A survey of use. Construction Innovation, 9(4), pp. 420-433. ISSN 1471-4175

Huang, X; Bernd, D and Bernold, L E (1996) Innovative technology development for safe excavation. Journal of Construction Engineering and Management, 122(1), pp. 91-96. ISSN 0733-9364

Huang, Y; Trinh, M T and Le, T (2021) Critical factors affecting intention of use of augmented hearing protection technology in construction. Journal of Construction Engineering and Management, 147(8): 0002116, ISSN 0733-9364

Hubbard, B; Huang, Q; Caskey, P and Wang, Y (2013) Safety awareness educational topics for the construction of power transmission systems with smart grid technologies. Construction Economics and Building, 13(3), pp. 114-127. ISSN 2204-9029

Huijbregts, H J J (2002) Information and communications technology for real estate investment management. DDes thesis, Harvard University, USA.

Hung, Yu-Hsiu (2010) How technology diffuses through construction user culture: An innovation design to improve safety technology adoption. PhD thesis, Virginia Tech, USA.

Hunhevicz, J J (2022) Exploring the potential of blockchain and cryptoeconomics for the construction industry. DSc thesis, ETH Zürich, Switzerland.

Hurst, A G (2009) CPD and work-based learning for construction managers: Is it accessible? In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Hyde, R (2023) An investigation into the relationship between technical design, fabrication process and material development for the production of thin, lightweight, high-performance concrete cladding components for the construction of beautiful, durable and resilient building envelopes. PhD thesis, Queen's University Belfast, UK.

Häkkinen, T and Belloni, K (2011) Barriers and drivers for sustainable building. Building Research & Information, 39(3), pp. 239-255. ISSN 0961-3218

Ibañez-Guzmán, J (1995) Modelling of on-site work cells for the simulation of automated and semi-automated construction. Construction Management and Economics, 13(5), pp. 427-434. ISSN 01446193

Ibrahim, Abdullahi Alabi (2024) Construction workers' situational awareness: Investigating the role of physical fatigue, workplace dynamism, and emerging technologies. PhD thesis, Texas A&M University, USA.

Imani, E and Asefi, M (2021) Empirical investigation of factors that enhance development of technology in design process improvement in architecture education: Analyses of students' views. Engineering, Construction and Architectural Management, 28(10), pp. 3164-3189. ISSN 0969-9988

Ingirige, M J B (2004) A study of knowledge sharing in multinational construction alliances. PhD thesis, University of Salford, UK.

Ioannou, P. G. and Liu, L. Y. (1993) Advanced construction technology system: Acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Ioannou, P G and Carr, R I (1988) Advanced building technology matrix system. Journal of Construction Engineering and Management, 114(4), pp. 517-531. ISSN 0733-9364

Ioannou, P G and Liu, L Y (1993) Advanced construction technology system: acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Irving, P A (2016) Explicating excessive financial resource allocation by building control in achieving regulatory conformity in domestic extensions. PhD thesis, University of Salford, UK.

Ishak, S S M and Newton, S (2016) An innovation resistance factor model. Construction Economics and Building, 16(3), pp. 87-103. ISSN 2204-9029

Isied, M M (2023) Critical assessment of asphalt mixture design procedures and asphalt mixture classification systems. PhD thesis, North Carolina State University, USA.

Isikdag, U (2006) Towards the implementation of building information models in geospatial context. PhD thesis, University of Salford, UK.

Ismail, Noor Akmal Adillah Binti (2017) Construction cost estimating incorporating building information modelling in the Malaysian construction industry. PhD thesis, Queensland University of Technology, Australia.

Ismail, Z A (2019) An integrated computerised maintenance management system (I-CMMS) for IBS building maintenance. International Journal of Building Pathology and Adaptation, 37(3), pp. 326-343. ISSN 23984708

Ismail, Z A B (2018) Improving contractor social networking on IBS infrastructure maintenance projects: A review. Engineering, Construction and Architectural Management, 25(4), pp. 479-496. ISSN 0969-9988

Ismail, Z A B (2021) Towards a BIM-based approach for improving maintenance performance in IBS building projects. Engineering, Construction and Architectural Management, 28(5), pp. 1468-1490. ISSN 0969-9988

Jackson, M (2007) Model development for the adoption of technology: electronic commerce in the construction industry. PhD thesis, University of Wolverhampton, UK.

Jafari, A and Akhavian, R (2019) Driving forces for the US residential housing price: A predictive analysis. Built Environment Project and Asset Management, 9(4), pp. 515-529. ISSN 2044-124X

Jamieson, I A (1997) Development of a concurrent engineering construction process protocol. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Janda, K B and Parag, Y (2013) A middle-out approach for improving energy performance in buildings. Building Research & Information, 41(1), pp. 39-50. ISSN 0961-3218

Jang, Y; Kim, K; Leite, F; Ayer, S and Cho, Y K (2021) Identifying the perception differences of emerging construction-related technologies between industry and academia to enable high levels of collaboration. Journal of Construction Engineering and Management, 147(10): 06021004, ISSN 0733-9364

Jansson, G; Johnsson, H and Engström, D (2014) Platform use in systems building. Construction Management and Economics, 32(1-2), pp. 70-82. ISSN 01446193

Jansson, G; Lundkvist, R and Olofsson, T (2015) The role of experience feedback channels in the continuous development of house-building platforms. Construction Innovation, 15(2), pp. 236-255. ISSN 1471-4175

Jaradat, S; Whyte, J and Luck, R (2013) Professionalism in digitally mediated project work. Building Research & Information, 41(1), pp. 51-59. ISSN 0961-3218

Jaselskis, E J; Gao, Z and Walters, R C (2005) Improving transportation projects using laser scanning. Journal of Construction Engineering and Management, 131(3), pp. 377-384. ISSN 0733-9364

Javed, A (2024) Optimizing infrastructure resilience through utility maturity. PhD thesis, University of Florida, USA.

Jayakrishna, K; Girubha, R J and Vinodh, S (2016) Comparison of sustainability characteristics of conventional and CNC turning processes: A case study. Journal of Engineering, Design and Technology, 14(3), pp. 422-445.

Jayanetti, J. K. D. D. T.; Fernando, M. H.; Ranadewa, K. A. T. O. and Perera, B. A. K. S. (2026) Fusion of machine learning to enhance the adaptability of lean construction maturity models (lcmms). Journal of Engineering, Design and Technology, 24(5), pp. 1298-1321. ISSN 1726-0531

Jayasena, H S; Thurairajah, N; Perera, B A K S and Siriwardena, M (2019) Promotion of diffusion of innovation: A study of BIM adoption in construction industries. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Jayasena, N S; Chan, D W M; Kumaraswamy, M M and Saka, A B (2023) Applicability of public-private partnerships in smart infrastructure development: The case of Hong Kong. International Journal of Construction Management, 23(11), pp. 1932-1944. ISSN 1562-3599

Jayawardana, Jayawardanage Janappriya (2024) Investigating the sustainability of modern construction practices focusing on prefabricated construction. PhD thesis, RMIT University, Australia.

Jelodar, M B; Wilkinson, S; Kalatehjari, R and Zou, Y (2022) Designing for construction procurement: An integrated decision support system for building information modelling. Built Environment Project and Asset Management, 12(1), pp. 111-127. ISSN 2044-124X

Jensen, J S and Koch, C (2007) Accelerating nano-technological innovation in the Danish construction industry. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Jiang, H and Payne, S (2022) Examining regime complexity in China's green housing transition: A housing developers' perspective. Building Research & Information, 50(3), pp. 291-307. ISSN 0961-3218

Jiang, L (2016) A constructability review ontology to support automated rule checking leveraging building information models. PhD thesis, Pennsylvania State University, USA.

Jiang, X; Zhou, H; Li, M; Lu, K; Lyu, S; Omrani, S and Skitmore, M (2024) Sustainable construction projects management in the AEC industry: Analysis and visualization. International Journal of Construction Management, 24(4), pp. 384-399. ISSN 1562-3599

Jiang, Ziang (2025) Advancing scan-vs-BIM in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jiang, Ziang (2025) Advancing scan-vs-bim in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jin, Z and Gambatese, J (2020) Exploring the potential of technological innovations for temporary structures: A survey study. Journal of Construction Engineering and Management, 146(6): 04020049, ISSN 0733-9364

Jirandeh, R R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: a novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Johansson, C (2001) A modularization approach to housing. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Johari, S (2021) Effect of socioemotional cognitive, and technical competencies of workers on construction labor productivity. PhD thesis, Indian Institute of Technology Delhi, India.

John, S. T.; Roy, B. K.; Sarkar, P. and Davis, R. (2020) IoT enabled real-time monitoring system for early-age compressive strength of concrete. Journal of Construction Engineering and Management, 146(2): 05019020, ISSN 0733-9364

Johnson, K A L (2013) Managing design for the delivery of best value. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(3), pp. 111-120. ISSN 17514312

Johnson, K D and Tatum, C B (1993) Technology in marine construction firms. Journal of Construction Engineering and Management, 119(1), pp. 148-162. ISSN 0733-9364

Johnston, B A (2012) Characterizing virtual prototype constructability programming for the pictographic instruction of procedure. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Jones, K; Mosca, L; Whyte, J; Davies, A and Glass, J (2022) Addressing specialization and fragmentation: Product platform development in construction consultancy firms. Construction Management and Economics, 40(11-12), pp. 918-933. ISSN 01446193

Jonsson, H (2018) Production strategy in project based production within a house-building context. PhD thesis, Linköping University, Sweden.

Jonsson, J (1996) Construction site productivity measurements selection, application and evaluation of methods and measures. PhD thesis, Luleå University of Technology, Sweden.

Jung, Y (1997) Information systems planning methodology for the construction industry. PhD thesis, University of Texas at Austin, USA.

Jung, Y; Oh, H and Jeong, M M (2019) An approach to automated detection of structural failure using chronological image analysis in temporary structures. International Journal of Construction Management, 19(2), pp. 178-185. ISSN 1562-3599

Kabiri, S (2014) Role conflict and role ambiguity in construction projects. PhD thesis, University of Reading, UK.

Kaiser, M J (2006) Offshore decommissioning cost estimation in the gulf of Mexico. Journal of Construction Engineering and Management, 132(3), pp. 249-258. ISSN 0733-9364

Kakar, A S and Hasan, A (2024) Exploring the combined effects of socio-political conflicts and patriarchic society on a construction career path: Evidence from Afghan female professionals. International Journal of Construction Education and Research, 20(1), pp. 98-118. ISSN 15578771

Kale, S and Arditi, D (2010) Innovation diffusion modeling in the construction industry. Journal of Construction Engineering and Management, 136(3), pp. 329-340. ISSN 0733-9364

Kamal, E M (2011) Absorptive capacity and implementation of new technology in Malaysian small and medium sized construction companies. PhD thesis, University of Reading, UK.

Kamal, E M and Flanagan, R (2014) Key characteristics of rural construction SMEs. Journal of Construction in Developing Countries, 19(2), pp. 1-13. ISSN 1823-6499

Kamal, E M; Lou, E C W; Yusof, N and Osmadi, A (2022) Absorptive capacity of Malaysian SME construction organisations. Architectural Engineering and Design Management, 18(3), pp. 313-324. ISSN 1745-2007

Kamm, J D (2017) A study of technological change in the construction industry through understanding the importance of innovation, risk and stakeholder alignment in construction lending. PhD thesis, Indiana State University, USA.

Kamunda, A; Renukappa, S; Suresh, S and Jallow, H (2021) BIM in the water industry: Addressing challenges to improve the project delivery process. Engineering, Construction and Architectural Management, 28(2), pp. 510-529. ISSN 0969-9988

Kanai, Júlia (2025) Systematic management model based on lean construction through a mobile app for industrialized buildings in the frame system. PhD thesis, Universidade Estadual de Campinas, Brazil.

Kashiwagi, D T (1991) Development of a performance based design/procurement system for nonstructural facility systems. PhD thesis, Arizona State University, USA.

Katebi, A.; Mohammadhosseini, A. and Keshtkar Ghalati, A. (2026) The covid-19 pandemic and its impact on the acceptance model of precast concrete components in building construction. Engineering, Construction and Architectural Management, pp. 1-27. ISSN 0969-9988

Kavaarpuo, G; Tiwari, P and Martel, A (2026) Transaction costs and innovation outcomes: Lessons from early adopters of housebuilding innovations. Construction Innovation, 26(1), pp. 236-259. ISSN 1471-4175

Kavaarpuo, Godwin (2022) Transaction costs and entrepreneurial discovery in house building innovations: A study of developers' behaviour in Ghana. PhD thesis, University of Melbourne, Australia.

Kavvouras, G (2010) A holistic systemic model for decision support in sustainable construction. PhD thesis, University of Nottingham, UK.

Kawane, T; Adu-Gyamfi, B and Shaw, R (2025) Exploring the elements of strengthening online higher education in disaster risk reduction: A perspective of sustained strategy in post COVID-19. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 173-192. ISSN 1759-5908

Kedir, F; Hall, D M; Brantvall, S; Lessing, J; Hollberg, A and Soman, R K (2024) Circular information flows in industrialized housing construction: The case of a multi-family housing product platform in Sweden. Construction Innovation, 24(5), pp. 1354-1379. ISSN 1471-4175

Kedir, F N (2022) The performance and potential of industrialized construction for resource-efficient housing construction: A multi-scalar approach across product, system, and context. DSc thesis, ETH Zürich, Switzerland.

Kelly, D J (2015) Investigating the relationships of project performance measures with the use of building information modeling (BIM) and integrated project delivery (IPD). PhD thesis, Eastern Michigan University, USA.

Khalid, Mohammad (2025) Enhancing computational thinking skills of the future construction workforce to perform sensor data analytics with end-user programming environment. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Khamkanya, T (2011) A holistic approach to workplace environments, management systems and new technologies in meeting corporate end-user requirements. PhD thesis, University of Ulster, UK.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology, 18(5), pp. 1241-1249. ISSN 1726-0531

Khan, N A; Ullah Khan, S; Ahmed, S; Farooqi, I H; Hussain, A; Vambol, S and Vambol, V (2020) Smart ways of hospital wastewater management, regulatory standards and conventional treatment techniques: A short review. Smart and Sustainable Built Environment, 9(4), pp. 727-736. ISSN 2046-6099

Khan, S; Panuwatwanich, K and Usanavasin, S (2024) Integrating building information modeling with augmented reality: Application and empirical assessment in building facility management. Engineering, Construction and Architectural Management, 31(7), pp. 2809-2828. ISSN 0969-9988

Khoshfetrat, R; Sarvari, H; Chan, D W M and Rakhshanifar, M (2022) Critical risk factors for implementing building information modelling (BIM): A Delphi-based survey. International Journal of Construction Management, 22(12), pp. 2375-2384. ISSN 1562-3599

Kim, Y W and Rhee, B D (2026) An incentive scheme in GMP contracts using a game theory approach. Journal of Construction Engineering and Management, 152(4): 04026016, ISSN 0733-9364

Kissi, E; Aigbavboa, C and Kuoribo, E (2023) Emerging technologies in the construction industry: Challenges and strategies in Ghana. Construction Innovation, 23(2), pp. 383-405. ISSN 1471-4175

Kissi, E; Eluerkeh, K; Aigbavboa, C; Addy, M and Babon-Ayeng, P (2025) Project managers' competencies in the era of digitalization: The case of the construction industry. Built Environment Project and Asset Management, 15(1), pp. 165-189. ISSN 2044-124X

Kiwan, M S A A (1994) Integration of building design and construction information: A neutral object-oriented model. PhD thesis, University of Dundee, UK.

Koch, C; Pedersen, T A and Fredslund, L (2024) Platforms of second-hand building material: A hub in the circular economy or fantasies of entrepreneurs? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Koekemoer, V and Smallwood, J (2007) Information technology (it) in the construction process. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Kokkonen, A and Alin, P (2016) Practitioners deconstructing and reconstructing practices when responding to the implementation of BIM. Construction Management and Economics, 34(7-8), pp. 578-591. ISSN 01446193

Koo, H J and O'Connor, J T (2022) A strategy for building design quality improvement through BIM capability analysis. Journal of Construction Engineering and Management, 148(8): 04022066, ISSN 0733-9364

Koo, H J; O’Connor, J and Sprouse, R (2024) Analyzing the characteristics of design defect leading indicators on building construction projects. International Journal of Construction Management, 24(8), pp. 834-842. ISSN 1562-3599

Koopman, K L (2023) Implementation of technological innovations within the South African construction industry. PhD thesis, Nelson Mandela University, South Africa.

Koraltan, S B and Dikbas, A (2002) An assessment of the applicability of partnering in the Turkish construction sector. Construction Management and Economics, 20(4), pp. 315-321. ISSN 01446193

Korb, S and Sacks, R (2021) Agent-based simulation of general contractor-subcontractor interactions in a multiproject environment. Journal of Construction Engineering and Management, 147(1): 1944, ISSN 0733-9364

Koskela, L J (2000) An exploration towards a production theory and its application to construction. DSc(Tech) thesis, Teknillinen Korkeakoulu (Helsinki), Finland.

Kriklenko, E (2020) Complex bending-active structures from continuous flexible planar sheets or a hybrid structure introducing the use of spacer fabrics. Architectural Engineering and Design Management, 17(3-4), pp. 1-22. ISSN 1745-2007

Kristinsdottir, A (2012) Risks and decision making in development of new power plant projects. PhD thesis, Massachusetts Institute of Technology, USA.

Kulkarni, S; Edwards, D J; Parn, E A; Chapman, C; Aigbavboa, C O and Cornish, R (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16(6), pp. 869-888. ISSN 1726-0531

Kumar, S (2013) Experience-based design review of healthcare facilities using interactive virtual prototypes. PhD thesis, Pennsylvania State University, USA.

Kumar, S (2016) Assessment and selection of psychological attributes: Design team perspectives. Journal of Engineering, Design and Technology, 14(4), pp. 874-896.

Kunkcu, H.; Koc, K. and Gurgun, A. P. (2026) Technology-enhanced communication and contract management in construction projects. International Journal of Construction Education and Research, 22(2), pp. 254-283. ISSN 1557-8771

Kurwi, S (2019) Integrating BIM and GIS for design collaboration in railway projects. PhD thesis, Loughborough University, UK.

Kurwi, S; Demian, P and Hassan, T M (2017) Integrating BIM and GIS in railway projects: A critical review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Kussl, S and Wald, A (2025) The role of construction clients in digital innovation: Insights from scenario analysis. Construction Management and Economics, 43(5), pp. 381-404. ISSN 0144-6193

Kuzmanovska, I (2020) Building design for manufacture and assembly (BDFMA): Reframing the design-production relationship in industrialised construction. PhD thesis, Monash University, Australia.

Kyaw Oo D’Amore, G and Mauro, F (2023) Numerical study on modelling perforated elements using porous baffle interface and porous region. Journal of Engineering, Design and Technology, 21(6), pp. 1827-1840. ISSN 1726-0531

Laborde, M and Sanvido, V (1994) Introducing new process technologies into construction companies. Journal of Construction Engineering and Management, 120(3), pp. 488-508. ISSN 0733-9364

Lai, J; Fu, Y; Chen, Y and Du, B (2023) Interactions among antecedents of project outsourcing strategies: Evidence from Chinese construction firms. Engineering, Construction and Architectural Management, 30(10), pp. 5196-5216. ISSN 0969-9988

Larsson, B; Sundqvist, J and Emmitt, S (2006) Component manufacturers' perceptions of managing innovation. Building Research & Information, 34(6), pp. 552-564. ISSN 0961-3218

Larsson, J; Lu, W; Krantz, J and Olofsson, T (2016) Discrete event simulation analysis of product and process platforms: A bridge construction case study. Journal of Construction Engineering and Management, 142(4): 04015097, ISSN 0733-9364

Lasni, A and Boton, C (2022) Implementing construction planning and control software: A specialized contractor perspective. Journal of Construction Engineering and Management, 148(9): 05022003, ISSN 0733-9364

Law, M.; Ninan, J.; Wamelink, H.; Jennen, P.; Meulstee, L. and van den Boom, I. (2026) Transition to timber construction: Project level socio-technical processes interpreted through a TIS framework perspective. Construction Management and Economics, 44(6), pp. 397-411. ISSN 0144-6193

Lee, Y. J. (2026) Exploring peer leadership and organizational culture in R&D: A social network and machine learning approach in South korea's construction industry. Construction Innovation, 26(6), ISSN 1471-4175

Lee, A and Sexton, M G (2007) ND modelling: Industry uptake considerations. Construction Innovation, 7(3), pp. 288-302. ISSN 1471-4175

Lee, J; Lorenc, S J and Bernold, L E (2003) Comparative performance evaluation of tele-operated pipe laying. Journal of Construction Engineering and Management, 129(1), pp. 32-40. ISSN 0733-9364

Lee, S H (2009) Computational fieldwork support for efficient operation and maintenance of mechanical, electrical and plumbing systems. PhD thesis, Carnegie Mellon University, USA.

Lei, Z; Sadiq Altaf, M; Cheng, Z; Liu, H and Tang, S (2023) Measurement of information loss and transfer impacts of technology systems in offsite construction processes. Journal of Construction Engineering and Management, 149(9): 05023011, ISSN 0733-9364

Leicht, R M (2009) A framework for planning effective collaboration using interactive workspaces. PhD thesis, Pennsylvania State University, USA.

Leiringer, R (2003) Technological innovations in the context of public-private partnership projects. PhD thesis, KTH Royal Institute of Technology, Sweden.

Leiringer, R (2006) Technological innovation in PPPs: Incentives, opportunities and actions. Construction Management and Economics, 24(3), pp. 301-308. ISSN 01446193

Leite Júnior, José Agnaldo Pereira (2016) Analysis of the quality of work life applications in the construction industry. PhD thesis, Universidade Estadual de Campinas, Brazil.

Lekan, A; Aigbavboa, C; Babatunde, O; Olabosipo, F and Christiana, A (2022) Disruptive technological innovations in construction field and fourth industrial revolution intervention in the achievement of the sustainable development goal 9. International Journal of Construction Management, 22(14), pp. 2647-2658. ISSN 1562-3599

Lennartsson, M; André, S and Elgh, F (2023) Plm support for design platforms in industrialized house-building. Construction Innovation, 23(2), pp. 265-286. ISSN 1471-4175

Leung, W Y (2006) A study of the competitiveness of local contractors in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Li, H.; Lyu, R.; Sheng, J.; Menadue, V. and Skitmore, M. (2026) Enhancing eco-efficiency in china's construction industry: Measurement, drivers, and policy implications using an ebm-tobit approach. International Journal of Construction Management, 26(9), pp. 1727-1745. ISSN 1562-3599

Li, H.; Wang, S.; Liu, J. and Guan, X. (2026) How the relationship quality of owner-contractor affects technological innovation performance in megaprojects: The mediating role of resource orchestration. Engineering, Construction and Architectural Management, 33(7), pp. 5155-5179. ISSN 0969-9988

Li, J. and Li, Y. (2026) A mini review of greenhouse gas emissions and mitigation strategies in the building sector. International Journal of Building Pathology and Adaptation, 44(5), pp. 1302-1328. ISSN 2398-4708

Li, H; Chan, N K Y and Skitmore, M (2012) The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes. Construction Innovation, 12(4), pp. 429-446. ISSN 1471-4175

Li, H; Guo, H; Skibniewski, M J and Skitmore, M (2008) Using the IKEA model and virtual prototyping technology to improve construction process management. Construction Management and Economics, 26(9), pp. 991-1000. ISSN 1466433X

Li, H; Guo, H L; Li, Y and Skitmore, M (2012) From IKEA model to the lean construction concept: A solution to implementation. International Journal of Construction Management, 12(4), pp. 47-63. ISSN 1562-3599

Li, H; Guo, H L; Skitmore, M; Huang, T; Chan, K Y N and Chan, G (2011) Rethinking prefabricated construction management using the VP-based IKEA model in Hong Kong. Construction Management and Economics, 29(3), pp. 233-245. ISSN 01446193

Li, J J (2023) A socio-technical framework to guide implementation and value realisation of distributed ledger technologies (DLT) in the construction sector. PhD thesis, Northumbria University, UK.

Li, K; Zou, Z; Shrestha, A; Shan, T and Shuai, F (2025) Fostering technological innovation value in rail megaprojects: Powers from the knowledge-collaboration network. Journal of Construction Engineering and Management, 151(11): 04025176, ISSN 0733-9364

Li, N and Becerik-Gerber, B (2011) Life-cycle approach for implementing RFID technology in construction: Learning from academic and industry use cases. Journal of Construction Engineering and Management, 137(12), pp. 1089-1098. ISSN 0733-9364

Li, Q; Yang, Y; Yao, G; Wei, F; Xue, G and Qin, H (2024) Multiobject real-time automatic detection method for production quality control of prefabricated laminated slabs. Journal of Construction Engineering and Management, 150(3): 05023017, ISSN 0733-9364

Li, Shuyang (2020) Proactive design approaches for energy-efficient buildings. PhD thesis, University of California, USA.

Li, Y and Liu, C (2019) Applications of multirotor drone technologies in construction management. International Journal of Construction Management, 19(5), pp. 401-412. ISSN 1562-3599

Li, Y; Zhu, L; Xue, R and Han, Y (2023) How policy diffusion influences regional BIM innovation: An empirical study in China. Journal of Construction Engineering and Management, 149(8): 05023008, ISSN 0733-9364

Li, Y; Maxwell, D W and Moehler, R (2025) Facilitating platform-based business model innovation in construction start-ups: A dynamic capability perspective. Construction Management and Economics, 43(10), pp. 864-881. ISSN 0144-6193

Li, Z and Tong, X (2017) Applications of the discrete element method and Fibonacci sequence on a banana screen. Journal of Engineering, Design and Technology, 15(1), pp. 2-12.

Liang, X (2012) Development of a framework for real-time 3D positioning and visualization of construction resources. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Liao, L; Ye, Y; Wei, N; Li, H and Fan, C (2024) Exploring blockchain technology acceptance among non-managerial construction practitioners in Shenzhen, China. Engineering, Construction and Architectural Management, 31(5), pp. 2053-2076. ISSN 0969-9988

Lijauco, F; Gajendran, T; Brewer, G and Rasoolimanesh, S M (2020) Impacts of culture on innovation propensity in small to medium enterprises in construction. Journal of Construction Engineering and Management, 146(3): 04019116, ISSN 0733-9364

Lim, T H B (2009) Organizational flexibility management in construction. PhD thesis, National University of Singapore, Singapore.

Lin, C H; Chih, Y Y and Tsay, Y S (2022) Determinants of the adoption of green building simulation technologies in architectural design practices in Taiwan. Journal of Construction Engineering and Management, 148(1): 04021190, ISSN 0733-9364

Lindblad, H (2019) BIM in translation exploring client organisations as drivers for change in construction. PhD thesis, KTH Royal Institute of Technology, Sweden.

Lindblad, H and Karrbom Gustavsson, T (2017) Receptiveness for change: The case of a public client. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Linderoth, H C J (2015) When big visions meet the pragmatic practice: Follow the institutional logic or personal benefits? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Linderoth, H C J (2017) From visions to practice: The role of sensemaking, institutional logic and pragmatic practice. Construction Management and Economics, 35(6), pp. 324-337. ISSN 0144-6193

Lindkvist, C and Elmualim, A (2009) Developing new technology in facilities management through knowledge roles. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Lindkvist, C and Elmualim, A (2010) An examination of actors that impact technology introduction to FM. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ling, F Y Y; Heng, G T H; Chang-Richards, A; Chen, X and Yiu, T W (2023) Impact of digital technology adoption on the comparative advantage of architectural, engineering, and construction firms in Singapore. Journal of Construction Engineering and Management, 149(12): 04023125, ISSN 0733-9364

Liu, D; Lu, W and Niu, Y (2018) Extended technology-acceptance model to make smart construction systems successful. Journal of Construction Engineering and Management, 144(6): 04018035, ISSN 0733-9364

Liu, J and Ma, G (2021) Study on incentive and supervision mechanisms of technological innovation in megaprojects based on the principal-agent theory. Engineering, Construction and Architectural Management, 28(6), pp. 1593-1614. ISSN 0969-9988

Liu, J; Yan, X and Gao, W (2024) A dualistic perspective of opportunity and risk: The impact of head-mounted augmented reality on construction onsite hazard identification of workers. Journal of Construction Engineering and Management, 150(11): 04024160, ISSN 0733-9364

Liu, Lan (2020) Design guidance and development of construction stormwater technologies. PhD thesis, Auburn University, USA.

Liu, T; Mostafa, S; Sherif, M and Tuan Son, N (2021) Emerging themes of public-private partnership application in developing smart city projects: A conceptual framework. Built Environment Project and Asset Management, 11(1), pp. 138-156. ISSN 2044-124X

Liu, X X; Liu, H H; Yang, G L and Pan, J F (2023) Productivity assessment of the real estate industry in China: A dea-malmquist index. Engineering, Construction and Architectural Management, 30(3), pp. 1243-1270. ISSN 0969-9988

Lizana, J; Miranda, N D; Gross, L; Mazzone, A; Cohen, F; Palafox-Alcantar, G; Fahr, P; Jani, A; Renaldi, R; McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings & Cities, 3(1), pp. 1075-1097. ISSN 2632-6655

Lloyd, C A (2020) Modular manufacture and construction of small nuclear power generation systems. PhD thesis, University of Cambridge, UK.

Lo, T Y J (2021) Innovation management in the construction industry: Innovation performance indicators for AECOO organizations. PhD thesis, Stanford University, USA.

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

London, B C K and Gajendran, T (2010) Diffusing cultural awareness and maturity in lean managed organizations. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

London, K and Singh, V (2013) Integrated construction supply chain design and delivery solutions. Architectural Engineering and Design Management, 9(3), pp. 135-157. ISSN 1745-2007

London, K; Singh, V; Taylor, C; Gu, N and Brankovic, L (2008) Building information modelling project decision support framework. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Lopez, J; Bhandari, S; Perry, L; Ayer, S K; Hallowell, M R and Jones, M (2025) Analyzing the impact of virtual reality and haptic feedback on the safety skills of construction workers. Journal of Construction Engineering and Management, 151(8): 04025110, ISSN 0733-9364

Lounsbury, C R (1983) From craft to industry: The building process in North Carolina in the nineteenth century. PhD thesis, George Washington University, USA.

Lovrenčić Butković, L; Mihić, M and Sigmund, Z (2023) Assessment methods for evaluating circular economy projects in construction: A review of available tools. International Journal of Construction Management, 23(5), pp. 877-886. ISSN 1562-3599

Low, W W and Wong, K S (2023) The status quo of facebook usage among young generations in civil engineering education. International Journal of Construction Management, 23(9), pp. 1471-1483. ISSN 1562-3599

Lowe, R (2007) Technical options and strategies for decarbonizing UK housing. Building Research & Information, 35(4), pp. 412-425. ISSN 0961-3218

Lu, S and Sexton, M G (2009) The establishment and growth of a high technology firm: Interim results from an exploratory longitudinal case study. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Lu, Y and Zhang, J (2022) Bibliometric analysis and critical review of the research on big data in the construction industry. Engineering, Construction and Architectural Management, 29(9), pp. 3574-3592. ISSN 0969-9988

Lucas, J and Gajjar, D (2022) Influence of virtual reality on student learning in undergraduate construction education. International Journal of Construction Education and Research, 18(4), pp. 374-387. ISSN 1557-8771

Lucas, J D (2012) An integrated BIM framework to support facility management in healthcare environments. PhD thesis, Virginia Tech, USA.

Lucas-Healey, K; Ransan-Cooper, H; Temby, H and Russell, A W (2022) Who cares? How care practices uphold the decentralised energy order. Buildings & Cities, 3(1), pp. 448-463. ISSN 2632-6655

Luigi, Guzzoni (2022) Construction management of cultural heritage. Conservation of cultural heritage during its construction site stage. Building information modelling supporting on site information collection and management for cost control. PhD thesis, Politecnico di Milano, Italy.

Lundrigan, C (2016) Megaprojects: A design and strategy perspective. PhD thesis, University of Manchester, UK.

Luo, Q.; Sun, C.; Li, G.; Li, Y.; Xue, J. and Zhang, G. (2026) Hierarchical schedule risk structures and mitigation strategies in prefabricated building projects: An integrated SNA-ISM approach. Engineering, Construction and Architectural Management, 33(7), pp. 5737-5759. ISSN 0969-9988

Luo, S; Liu, Z; Yang, X; Lu, Q and Yin, J (2019) Construction technology of warm and hot mix epoxy asphalt paving for long-span steel bridge. Journal of Construction Engineering and Management, 145(12): 04019074, ISSN 0733-9364

Lutz, J D; Chang, L M and Napier, T R (1990) Evaluation of new building technology. Journal of Construction Engineering and Management, 116(2), pp. 281-299. ISSN 0733-9364

M.E. Sepasgozar, S (2020) Digital technology utilisation decisions for facilitating the implementation of industry 4.0 technologies. Construction Innovation, 21(3), pp. 476-489. ISSN 1471-4175

Ma, L; Liu, C and Mills, A (2016) Construction labor productivity convergence: A conditional frontier approach. Engineering, Construction and Architectural Management, 23(3), pp. 283-301. ISSN 0969-9988

Ma, L and Lu, Y (2025) How does top management team regulatory focus influence management innovation and performance in megaprojects: The moderating role of project uncertainties. Engineering, Construction and Architectural Management, 32(3), pp. 1411-1434. ISSN 0969-9988

Madanayake, U H and Egbu, C (2019) Critical analysis for big data studies in construction: Significant gaps in knowledge. Built Environment Project and Asset Management, 9(4), pp. 530-547. ISSN 2044-124X

Madsen, L V (2018) Materialities shape practices and notions of comfort in everyday life. Building Research & Information, 46(1), pp. 71-82. ISSN 0961-3218

Maftei, L (2015) The use of immersive virtual reality technology in the design process: a reflective practice approach. PhD thesis, University of Reading, UK.

Mahamadu, A M; Mahdjoubi, L and Booth, C A (2014) Determinants of building information modelling (BIM) acceptance for supplier integration: A conceptual model. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Mahamedi, E; Wonders, M; Kassem, M; Woo, W L and Greenwood, D (2022) Digital twin and building performance: A review and proposed framework. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Mahapatra, K and Gustavsson, L (2008) Multi-storey timber buildings: Breaking industry path dependency. Building Research & Information, 36(6), pp. 638-648. ISSN 0961-3218

Mahmood, A F and Rafaa, M M (2022) Designing a collection of two IoT-systems for real time health telemonitoring. Journal of Engineering, Design and Technology, 20(1), pp. 86-98. ISSN 1726-0531

Makabate, C T (2021) Investigating the adoption of building information modelling (BIM) within the small medium enterprises (SMEs) in contracting and consulting organisatios in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Mamphweli, N S and Meyer, E L (2011) Development of a cyclone with internal electric field. Journal of Engineering, Design and Technology, 9(3), pp. 313-322. ISSN 1726-0531

Mangezi, W (2019) Red tape in upgrading of informal settlements in Nelson Mandela Bay. PhD thesis, Nelson Mandela University, South Africa.

Manley, K and McFallan, S (2006) Exploring the drivers of firm-level innovation in the construction industry. Construction Management and Economics, 24(9), pp. 911-920. ISSN 1466433X

Mansoor, A; Liu, S; Bouferguene, A and Al-Hussein, M (2024) Crane signalman hand-signal classification framework using sensor-based smart construction glove and machine-learning algorithms. Journal of Construction Engineering and Management, 150(8): 04024094, ISSN 0733-9364

Manzoor, B; Antwi-Afari, M F; Alotaibi, K S; Edwards, D J and Posillico, J J (2025) Critical success factors for implementing digital twin technology in construction projects: A systematic and bibliometric approach. Journal of Construction Engineering and Management, 151(12): 03125008, ISSN 0733-9364

Marefat, A; Toosi, H and Mahmoudi Hasankhanlo, R (2019) A BIM approach for construction safety: Applications, barriers and solutions. Engineering, Construction and Architectural Management, 26(9), pp. 1855-1877. ISSN 0969-9988

Marks, E D and Teizer, J (2013) Method for testing proximity detection and alert technology for safe construction equipment operation. Construction Management and Economics, 31(6), pp. 636-646. ISSN 1466433X

Marsh, D; Bryde, D and Graham, A (2014) Perceptions of the value and viability of implementing lean construction with business information modelling. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Marsh, R (2016) LCA profiles for building components: Strategies for the early design process. Building Research & Information, 44(4), pp. 358-375. ISSN 0961-3218

Martin, H; Garner, M; Manewa, A and Chadee, A (2025) Validating the relative importance of technology diffusion barriers– exploring modular construction design-build practices in the UK. International Journal of Construction Education and Research, 21(1), pp. 3-23. ISSN 1557-8771

Martin, H; Watson, C and Brooks, T (2025) Synergizing BIM and riba in architectural practice-technology workflow efficiencies, challenges, and insights. Architectural Engineering and Design Management, 21(1), pp. 35-59. ISSN 1745-2007

Martin, R (2022) Energy housekeeping: Intersections of gender, domestic labour and technologies. Buildings & Cities, 3(1), pp. 554-569. ISSN 2632-6655

Martinez, P; Livojevic, M; Jajal, P; Aldrich, D R; Al-Hussein, M and Ahmad, R (2020) Simulation-driven design of wood framing support systems for off-site construction machinery. Journal of Construction Engineering and Management, 146(7): 04020075, ISSN 0733-9364

Martins, S S; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Evaluation of 4D BIM tools applicability in construction planning efficiency. International Journal of Construction Management, 22(15), pp. 2987-3000. ISSN 1562-3599

Maslova, S and Burgess, G (2023) Delivering human-centred housing: Understanding the role of post-occupancy evaluation and customer feedback in traditional and innovative social housebuilding in England. Construction Management and Economics, 41(4), pp. 277-292. ISSN 01446193

Maxwell, D and Couper, R (2023) Construction tracking: Implications of logistics data. Construction Innovation, 23(2), pp. 322-339. ISSN 1471-4175

Maxwell, Duncan William (2018) The case for design-value in industrialised house building platforms: Product to ecosystem. PhD thesis, University of Sydney, Australia.

McAleenan, C (2016) Operation analysis and control: a paradigm shift in construction safety management. PhD thesis, University of South Wales, UK.

McCain, M L (1986) Skill and deskilling in the English building trades in the nineteenth-century. PhD thesis, Georgetown University, USA.

McCord, K (2022) Augmented reality for hands-on construction education. PhD thesis, Arizona State University, USA.

McCullouch, B G and Lueprasert, K (1994) 2D bar-code applications in construction. Journal of Construction Engineering and Management, 120(4), pp. 739-752. ISSN 0733-9364

McElroy, D J and Rosenow, J (2019) Policy implications for the performance gap of low-carbon building technologies. Building Research & Information, 47(5), pp. 611-623. ISSN 0961-3218

McElroy, L B (2009) Embedding integrated building performance assessment in design practice. PhD thesis, University of Strathclyde, UK.

McEvoy, M and Southall, R (2010) A programme of testing to evaluate a passive approach to whole-house ventilation. Construction Innovation, 10(4), pp. 395-407. ISSN 1471-4175

McLean, W (2018) Technological innovation in architecture: the role of the aberrant practitioner. PhD thesis, University of Westminster, UK.

McLoud, M (1988) Craftsmen and entrepreneurs: Builders in late nineteenth-century Washington, D.C. PhD thesis, George Washington University, USA.

McNamara, A J; Shirowzhan, S and M.E. Sepasgozar, S (2024) Investigating the determents of intelligent construction contract adoption: A refinement of the technology readiness index to inform an integrated technology acceptance model. Construction Innovation, 24(3), pp. 702-724. ISSN 1471-4175

McNicholas, T M (1994) Potential barriers to the adoption of new technology in the United States construction industry. DBA thesis, Golden Gate University, USA.

Mechlenborg, M and Gram-Hanssen, K (2022) Masculine roles and practices in homes with photovoltaic systems. Buildings & Cities, 3(1), pp. 638-652. ISSN 2632-6655

Memarzia, K (1995) Productivity and the Iranian building industry: a case study of component manufacture. PhD thesis, University of York, UK.

Mesa Jiménez, J J (2021) Artificial intelligence for optimisation and demand side response in built environment. PhD thesis, Brunel University, UK.

Meso, P N (2001) Knowledge management infrastructure systems development and the catalysis of knowledge management processes in web-based virtual organizations. PhD thesis, Kent State University, USA.

Miller, A; Radcliffe, D and Isokangas, E (2009) A perception-influence model for the management of technology implementation in construction. Construction Innovation, 9(2), pp. 168-183. ISSN 1471-4175

Millet, A; Abi Akle, A and Legardeur, J (2024) Assessing users-designers’ gap of perception to help design for a hybrid product domain: application to sport-health product domain. Journal of Engineering, Design and Technology, 22(6), pp. 1999-2019. ISSN 1726-0531

Min, Y and Lee, H W (2024) Adoption inequalities and causal relationship between residential electric vehicle chargers and heat pumps. Journal of Construction Engineering and Management, 150(5): 04024025, ISSN 0733-9364

Mishra, A; Hasan, A and Jha, K N (2024) A holistic evaluation of BIM implementation barriers in the Indian construction industry: Pre- and post-adoption perspectives. International Journal of Construction Education and Research, 20(3), pp. 358-380. ISSN 15578771

Mitropoulos, P (1996) Technology adoption decisions in construction organizations. PhD thesis, Stanford University, USA.

Mitropoulos, P and Tatum, C B (1999) Technology adoption decisions in construction organizations. Journal of Construction Engineering and Management, 125(5), pp. 330-338. ISSN 0733-9364

Mitropoulos, P and Tatum, C B (2000) Forces driving adoption of new information technologies. Journal of Construction Engineering and Management, 126(5), pp. 340-348. ISSN 0733-9364

Mitrovic, D; Male, S; Hunter, I A N and Watson, A (1999) Large scale engineering project process and user requirements. Engineering, Construction and Architectural Management, 6(1), pp. 38-50. ISSN 0969-9988

Mlitwa, N W B and Wanyonyi, D W (2015) Towards interactive open source based m-Learning solution: The m-Chisimba framework. Journal of Engineering, Design and Technology, 13(3), pp. 463-485.

Mohamad, M I (1999) The application of concurrent engineering philosophy to the construction industry. PhD thesis, Loughborough University, UK.

Mohammadi, N; Heidary Dahooie, J and Khajevand, M (2023) A hybrid approach for identifying and prioritizing critical success factors in technology transfer projects (case study: Diesel locomotive manufacturing). Journal of Engineering, Design and Technology, 21(5), pp. 1389-1413. ISSN 1726-0531

Mohareb, E; Gillich, A and Bristow, D (2022) Participation in domestic energy retrofit programmes: Key spatio-temporal drivers. Buildings & Cities, 3(1), pp. 356-375. ISSN 2632-6655

Mohd Ishak, Siti Salwa Binti (2014) Resistance factors to technology innovation in construction organisations. PhD thesis, University of New South Wales, Australia.

Momade, M H; Durdyev, S; Van Tam, N; Shahid, S; Mbachu, J and Momade, Y (2024) Factors influencing adoption of construction technologies in Vietnam's residential construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1002-1018. ISSN 2398-4708

Monahan, J (2013) Housing and carbon reduction: can mainstream 'eco-housing' deliver on its low carbon promises? PhD thesis, University of East Anglia, UK.

Moncaster, A (2012) Constructing sustainability: connecting the social and the technical in a case study of school building projects. PhD thesis, University of East Anglia, UK.

Moore, B C (1993) Modeling risk of lunar construction activities: A technology assessment approach. PhD thesis, Georgia Institute of Technology, USA.

Moore, D R and Abadi, M (2005) Virtual team working and associated technologies within the UK construction industry. Architectural Engineering and Design Management, 1(1), pp. 21-32. ISSN 1745-2007

Motawa, I A (2001) Simulating the implementation of technological innovations in construction. PhD thesis, Loughborough University, UK.

Motawa, I A; Price, A D F and Sher, W (1998) The introduction and management of innovative construction processes and products. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Motawa, I A; Price, A D F and Sher, W (1999) Implementing construction innovations. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Motjolopane, B P and van Zyl, R (2009) A review of rectenna models for electromagnetic energy harvesting. Journal of Engineering, Design and Technology, 7(3), pp. 282-292. ISSN 1726-0531

Moura, Paula Kvitko de (2022) Guidelines for the development of innovative solutions in the construction industry. PhD thesis, Universidade Federal do Rio Grande do Sul, Brazil.

Mrad, F; Asem Abdul-Malak, M; Sadek, S and Khudr, Z (2002) Automated excavation in construction using robotics trajectory and envelop generation. Engineering, Construction and Architectural Management, 9(4), pp. 325-335. ISSN 0969-9988

Msomi, V and Oliver, G J (2016) Smart morphing based on shape memory alloy plate. Journal of Engineering, Design and Technology, 14(3), pp. 475-488.

Murguia, D; Vasquez, C; Demian, P and Soetanto, R (2023) BIM adoption among contractors: A longitudinal study in Peru. Journal of Construction Engineering and Management, 149(1): 04022140, ISSN 0733-9364

Murphy, M E; Perera, S and Heaney, G (2015) Innovation management model: A tool for sustained implementation of product innovation into construction projects. Construction Management and Economics, 33(3), pp. 209-232. ISSN 01446193

Musa, S (2019) A framework of intra-organisational knowledge sharing practices in implementing BIM within the Malaysian construction industry. PhD thesis, University of Salford, UK.

Mutai, A (2009) Factors influencing the use of building information modeling (BIM) within leading construction firms in the United States of America. PhD thesis, Indiana State University, USA.

Nahmens, I and Mullens, M (2009) The impact of product choice on lean homebuilding. Construction Innovation, 9(1), pp. 84-100. ISSN 1471-4175

Nahmens, I and Reichel, C (2013) Adoption of high performance building systems in hot-humid climates: lessons learned. Construction Innovation, 13(2), pp. 186-201. ISSN 1471-4175

Nam, C H and Tatum, C B (1997) Leaders and champions for construction innovation. Construction Management and Economics, 15(3), pp. 259-270. ISSN 01446193

Namian, M; Albert, A and Feng, J (2018) Effect of distraction on hazard recognition and safety risk perception. Journal of Construction Engineering and Management, 144(4): 04018008, ISSN 0733-9364

Nassereddine, H M (2019) Design, development and validation of an augmented reality-enabled production strategy process for the construction industry. PhD thesis, University of Wisconsin - Madison, USA.

Nathan, P (1991) Project planning and control systems: An investigation into their application and implications of usage in the UK construction industry. PhD thesis, Brunel University, UK.

Nayak, B; Bhattacharyya, S S S; Kulkarni, O and Mehdi, S N (2023) Adoption of online pharmacy applications during COVID-19 pandemic; empirical investigation in the Indian context from push-pull and mooring framework. Journal of Engineering, Design and Technology, 21(4), pp. 1173-1196. ISSN 1726-0531

Negahban, S (2008) Utilization of enterprise resource planning tools by small to medium size construction organizations: A decision-making model. PhD thesis, University of Maryland, College Park, USA.

Nelms, C E; Russell, A D and Lence, B J (2007) Assessing the performance of sustainable technologies: A framework and its application. Building Research & Information, 35(3), pp. 237-251. ISSN 0961-3218

Ng, F F (1990) A knowledge analysis model for knowledge engineering in the construction industry. PhD thesis, University of Hong Kong, Hong Kong.

Ng, Ming Shan (2022) Design for digital fabrication (dfdfab): Management for sustainable adoption of emerging technologies and innovations. PhD thesis, ETH Zürich, Switzerland.

Nguyen, H V (2010) Process-based cost modeling to support target value design. PhD thesis, University of California, Berkeley, USA.

Nguyen, T; Gosine, R and Warrian, P (2022) A review of the role of digitalization in health risk management in extractive industries: a study motivated by COVID-19. Journal of Engineering, Design and Technology, 20(2), pp. 475-496. ISSN 1726-0531

Nguyen, T A; Le, N M U; Nguyen, S H and Ngo, N V (2024) Determining the Frequency of Component with Building Information Modelling-Level of Development in Facility Management: A Case Study in Vietnam. Journal of Construction in Developing Countries, 29(2), pp. 157-180. ISSN 1823-6499

Nguyen, T T N; Anh Nguyen, T; Tien Do, S and Nguyen, V T (2023) Assessing stakeholder behavioural intentions of BIM uses in Vietnam's construction projects. International Journal of Construction Management, 23(13), pp. 2279-2287. ISSN 1562-3599

Ninan, J; Mahalingam, A; Clegg, S and Sankaran, S (2020) ICT for external stakeholder management: Sociomateriality from a power perspective. Construction Management and Economics, 38(9), pp. 840-855. ISSN 01446193

Nishida, Y; Hua, Y and Okamoto, N (2016) Alternative building emission-reduction measure: Outcomes from the Tokyo cap-and-trade program. Building Research & Information, 44(5-6), pp. 644-659. ISSN 0961-3218

Nnaji, C; Gambatese, J; Karakhan, A and Eseonu, C (2019) Influential safety technology adoption predictors in construction. Engineering, Construction and Architectural Management, 26(11), pp. 2655-2681. ISSN 0969-9988

Nnaji, C; Gambatese, J; Karakhan, A and Osei-Kyei, R (2020) Development and application of safety technology adoption decision-making tool. Journal of Construction Engineering and Management, 146(4): 04020028, ISSN 0733-9364

North, Steve (2003) Clients' 3D visualisation of construction performance: from s-curves to data surfaces. PhD thesis, University College London, UK.

Noruwa, B; Merschbrock, C; Arewa, A O and Agyekum-Mensah, G (2018) Institutional foundations of construction ICT: A view from the West midlands of England. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Noruwa, B I (2020) Application and effects of emerging technologies on variation minimisation in the UK construction projects. PhD thesis, Coventry University, UK.

Noruwa, B I; Arewa, A O and Merschbrock, C (2022) Effects of emerging technologies in minimising variations in construction projects in the UK. International Journal of Construction Management, 22(11), pp. 2199-2206. ISSN 1562-3599

Nouh, A; Elkasaby, E and Wageh, O (2024) Dynamic approach for investigating delivery system effects on infrastructure project performance. Engineering, Construction and Architectural Management, 31(12), pp. 4791-4808. ISSN 0969-9988

Nourbakhsh, M; Mohamad Zin, R; Irizarry, J; Zolfagharian, S and Gheisari, M (2012) Mobile application prototype for onsite information management in construction industry. Engineering, Construction and Architectural Management, 19(5), pp. 474-494. ISSN 0969-9988

Nuntasunti, S (2004) The effects of visual-based information logistics in construction. PhD thesis, North Carolina State University, USA.

Nwadike, A N and Wilkinson, S (2022) Why amending building codes? An investigation of the benefits of regular building code amendment in New Zealand. International Journal of Building Pathology and Adaptation, 40(1), pp. 76-100. ISSN 23984708

Nyqvist, R; Peltokorpi, A; Lavikka, R and Ainamo, A (2025) Building the digital age: Management of digital transformation in the construction industry. Construction Management and Economics, 43(4), pp. 262-283. ISSN 0144-6193

Nyqvist, Roope (2025) Data-driven transformation in construction management: From artificial intelligence to network modeling. PhD thesis, Aalto University, Finland.

O'Brien, M and Al-Soufi, A (1994) A survey of data communications in the UK construction industry. Construction Management and Economics, 12(5), pp. 457-465. ISSN 01446193

O'Connor, J T and Mock, B (2020) Responsibilities and accountabilities for industrial facility commissioning and startup activities. Construction Innovation, 20(4), pp. 625-645. ISSN 1471-4175

O'Connor, J T and Yang, L R (2004) Project performance versus use of technologies at project and phase levels. Journal of Construction Engineering and Management, 130(3), pp. 322-329. ISSN 0733-9364

O'Grady, W (2013) A knowledge management system to optimise comfort throughout the building life-cycle. PhD thesis, University College Cork, Ireland.

Obiaigwe, Innocent Onyeka (2025) Robotizing safety: Prospects and barriers of robotic technology adoption for construction injury prevention in the UK. PhD thesis, University of Salford, UK.

Ofori, J. N. A.; Tomori, M. and Ogunseiju, O. (2026) A predictive framework for optimizing cognition during human-wearable robot interactions in the construction industry. Journal of Construction Engineering and Management, 152(10): 04026160, ISSN 0733-9364

Ofori, G (2015) Nature of the construction industry, its needs and its development: A review of four decades of research. Journal of Construction in Developing Countries, 20(2), pp. 115-135. ISSN 1823-6499

Ogunrinde, O (2020) Enhancing quality management in highway construction using emerging methods. PhD thesis, University of Alabama, USA.

Ohueri, C C; Masrom, M A N; Habil, H and Ambashe, M S (2025) IoT-based digital twin best practices for reducing operational carbon in building retrofitting: A mixed-method approach. Engineering, Construction and Architectural Management, 32(3), pp. 2044-2065. ISSN 0969-9988

Ojode, L A (2000) A resource -based view of strategic alliances: Organizational capabilities, governance, and performance. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Okakpu, A; Ghaffarianhoseini, A; Tookey, J; Haar, J; Ghaffarianhoseini, A and Rehman, A U (2022) Risk factors that influence adoption of building information modelling (BIM) for refurbishment of complex building projects: Stakeholders perceptions. International Journal of Construction Management, 22(13), pp. 2446-2458. ISSN 1562-3599

Okanlawon, T T; Oyewobi, L O and Jimoh, R A (2023) Evaluation of the drivers to the implementation of blockchain technology in the construction supply chain management in Nigeria. Journal of Financial Management of Property and Construction, 28(3), pp. 459-476. ISSN 1366-4387

Oke, A; Atofarati, J and Bello, S (2022) Awareness of 3D printing for sustainable construction in an emerging economy. Construction Economics and Building, 22(2), pp. 52-68. ISSN 2204-9029

Oke, A E; Aliu, J; Oni, S B and Ilesanmi, O O (2025) The complexities of embracing mechatronics in the Nigerian construction industry. Construction Innovation, 25(4), pp. 1188-1209. ISSN 1471-4175

Oke, A E; Arowoiya, V A; Chan, M and Oyediran, A (2025) Digital twin technology (DTT) in a developing construction industry: Evaluation of the awareness and usage among professionals in Nigeria. International Journal of Construction Management, 25(11), pp. 1313-1323. ISSN 1562-3599

Okoro, C S; Nnaji, C and Adediran, A (2023) Determinants of immersive technology acceptance in the construction industry: Management perspective. Engineering, Construction and Architectural Management, 30(7), pp. 2645-2668. ISSN 0969-9988

Okpala, I; Nnaji, C and Awolusi, I (2022) Wearable sensing devices acceptance behavior in construction safety and health: Assessing existing models and developing a hybrid conceptual model. Construction Innovation, 22(1), pp. 57-75. ISSN 1471-4175

Okpala, I U (2022) Robotics and automation in construction: Developing foundational insight and tools to support safe implementation. PhD thesis, University of Alabama, USA.

Olabanji, O M and Mpofu, K (2020) Adopting hybridized multicriteria decision model as a decision tool in engineering design. Journal of Engineering, Design and Technology, 18(2), pp. 451-479. ISSN 1726-0531

Oladinrin, O T; Arif, M; Rana, M Q and Gyoh, L (2023) Interrelations between construction ethics and innovation: A bibliometric analysis using vosviewer. Construction Innovation, 23(3), pp. 505-523. ISSN 1471-4175

Olaniyan, R (2019) Barriers to technology adoption among construction project managers in Nigeria. PhD thesis, Walden University, USA.

Olsen, J; Lee, Z H and Pong, W (2007) Optimal selection of concrete anchors for connection cost reduction. Construction Management and Economics, 25(4), pp. 423-434. ISSN 1466433X

Olusola, J. and Phung, Q. (2026) A framework for adopting smart contracts in the Nigerian construction industry. International Journal of Construction Management, 26(7), pp. 1284-1298. ISSN 1562-3599

Omar, B (2012) Context-aware services delivery in the construction supply chain. PhD thesis, University of Reading, UK.

Omar, I and Mncwango, S (2005) Sanitary landfill energy harnessing and applications. Journal of Engineering, Design and Technology, 3(2), pp. 127-139. ISSN 1726-0531

Onososen, A; Musonda, I; Molusiwa, R and Dzuwa, C (2023) Addressing collaborative challenges in human-robot teams through the development of an immersive virtual environment. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ormeno Blanco, J. M. and Arranz, B. (2026) Exploring urban lighting design effect on citizens' emotions through the application of kansei methodology. Smart and Sustainable Built Environment, 15(3), pp. 991-1025. ISSN 2046-6099

Ormeno Blanco, J. M. and Arranz, B. (2026) Exploring urban lighting design effect on citizens´ emotions through the application of kansei methodology. Smart and Sustainable Built Environment, 15(3), pp. 991-1025. ISSN 2046-6099

Orstavik, F (2014) Innovation as re-institutionalization: A case study of technological change in housebuilding in Norway. Construction Management and Economics, 32(9), pp. 857-873. ISSN 01446193

Osei-Kyei, R and Chan, A P C (2017) Empirical comparison of critical success factors for public-private partnerships in developing and developed countries: A case of Ghana and Hong Kong. Engineering, Construction and Architectural Management, 24(6), pp. 1222-1245. ISSN 0969-9988

Oti-Sarpong, K (2019) Examining international technology transfer on construction projects in developing countries through a social construction of technology lens. PhD thesis, University of Hong Kong, Hong Kong.

Oti-Sarpong, K and Burgess, G (2020) Offsite manufacturing and construction industry transformation: A multi-level sociotechnical transitions perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ovrawah, Victor (2025) Automated prefabrication in the Australian residential building sector: Current state of development and adoption barriers. PhD thesis, Bond University, Australia.

Owusu-Manu, D G; Debrah, C; Oduro-Ofori, E; Edwards, D J and Antwi-Afari, P (2021) Attributable indicators for measuring the level of greenness of cities in developing countries: lessons from Ghana. Journal of Engineering, Design and Technology, 19(3), pp. 625-646. ISSN 1726-0531

Oyewobi, L O; Olorunyomi, O S; Jimoh, R A and Rotimi, J O B (2020) Impact of social media usage on performance of construction businesses (CBS) in Abuja, Nigeria. Journal of Financial Management of Property and Construction, 26(2), pp. 257-278. ISSN 1366-4387

Ozener, O O (2009) Studio education for integrated practice using building information modeling. PhD thesis, Texas A&M University, USA.

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Ozumba, A O; Ojiako, U; Shakantu, W; Marshall, A and Chipulu, M (2019) Process need areas and technology adoption in construction site management. Journal of Construction in Developing Countries, 24(2), pp. 123-155. ISSN 1823-6499

Pace, C B (1999) A factor-based three dimensional model of the process of new technology development in the construction engineering industry. PhD thesis, University of California, Berkeley, USA.

Palaneeswaran, E and Kumaraswamy, M M (2003) Knowledge mining of information sources for research in construction management. Journal of Construction Engineering and Management, 129(2), pp. 182-191. ISSN 0733-9364

Palsodkar, M A; Pansare, R; Nagare, M R and Narwane, V (2025) Repurposing product development after COVID-19 by integrating industry 4.0 and agile new product development practices in emerging economies. Journal of Engineering, Design and Technology, 23(5), pp. 1592-1618. ISSN 1726-0531

Pan, M and Pan, W (2020) Understanding the determinants of construction robot adoption: Perspective of building contractors. Journal of Construction Engineering and Management, 146(5): 04020040, ISSN 0733-9364

Pan, N-H (1996) Automatic data processing technologies and industry-wide information transfer standards in the construction industry. PhD thesis, State University of New York at Buffalo, USA.

Pan, W; Dainty, A R J and Gibb, A G F (2012) Establishing and weighting decision criteria for building system selection in housing construction. Journal of Construction Engineering and Management, 138(11), pp. 1239-1250. ISSN 0733-9364

Pan, W and Sidwell, R (2011) Demystifying the cost barriers to offsite construction in the UK. Construction Management and Economics, 29(11), pp. 1081-1099. ISSN 1466433X

Paneru, S; Suh, S; Seo, W and Rausch, C (2024) Evaluating the decarbonization potential of industrialized construction: A review of the current state, opportunities, and challenges. Journal of Construction Engineering and Management, 150(9): 03124005, ISSN 0733-9364

Panuwatwanich, Kriengsak (2008) Modelling the innovation diffusion process in Australian architectural and engineering design organisations. PhD thesis, Griffith University, Australia.

Papageorgiou, G and Demetriou, G (2020) Investigating learning and diffusion strategies for sustainable mobility. Smart and Sustainable Built Environment, 9(1), pp. 1-16. ISSN 2046-6099

Parisi, Fabio (2023) Automation and information approaches to support maintenance and production management in the construction industry. PhD thesis, Politecnico di Bari, Italy.

Parkinson, A T; Friedman, K S; Hacking, T; Cooke, A J and Guthrie, P M (2012) Exploring scenarios for the future of energy management in UK property. Building Research & Information, 40(3), pp. 373-388. ISSN 0961-3218

Parrish, K D (2009) Applying a set-based design approach to reinforcing steel design. PhD thesis, University of California, Berkeley, USA.

Patil, M. P.; Salama, A. M.; Arnfield, J. and Alvanides, S. (2026) Youwalk-youreclaim: A co-assessment approach for active university campus environments. Smart and Sustainable Built Environment, 15(5), pp. 1663-1694. ISSN 2046-6099

Paul, V K and Seth, V (2017) Benchmarking and objective selection of technologies for housing in India using quality function deployment. Journal of Construction in Developing Countries, 22(S1), pp. 63-78. ISSN 1823-6499

Peiman, F; Khalilzadeh, M; Shahsavari-Pour, N and Ravanshadnia, M (2025) Estimation of building project completion duration using a natural gradient boosting ensemble model and legal and institutional variables. Engineering, Construction and Architectural Management, 32(4), pp. 2069-2104. ISSN 0969-9988

Peltokorpi, A; Olivieri, H; Granja, A D and Seppänen, O (2018) Categorizing modularization strategies to achieve various objectives of building investments. Construction Management and Economics, 36(1), pp. 32-48. ISSN 01446193

Peltola, T and Mansikkamäki, P (2007) Formable multilayer PCB structure: Design and technology demonstrator. Journal of Engineering, Design and Technology, 5(2), pp. 148-158. ISSN 1726-0531

Peltomaa, J; Mela, H and Hildén, M (2020) Housing managers as middle actors implementing sustainable housing policies in Finland. Building Research & Information, 48(1), pp. 53-66. ISSN 0961-3218

Penland, J L (2002) Implementation of web-based team collaboration tools in the architectural, engineering and construction industry. PhD thesis, University of Kansas, USA.

Pereira Junior, Mario Lucio (2019) The production of buildings in light of new informational paradigms and BIM technology with the contribution of knowledge organization and management. PhD thesis, Universidade Federal de Minas Gerais, Brazil.

Perera, C. S. R.; Francis, V. and Gao, S. (2025) A conceptual framework for industry 4.0 acceptance and adoption in the construction industry: A systematic review. Construction Innovation, 26(5), pp. 1498-1522. ISSN 1471-4175

Perera, C. S. R.; Francis, V. and Gao, S. (2026) Uptake of industry 4.0 technologies in Australian construction firms. Engineering, Construction and Architectural Management, 33(3), pp. 2071-2088. ISSN 0969-9988

Perera, C S R; Francis, V and Shang, G (2023) Acceptance and adoption of construction 4.0 related technology: A review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Perera, Colombapatabendige Savindi Ranthika (2023) A technology acceptance framework for the adoption of construction 4.0. PhD thesis, University of Melbourne, Australia.

Perkinson, C L (2008) The use of computing technology in highway construction contractor companies as a total jobsite management tool (TJMT). PhD thesis, Florida International University, USA.

Perkowski, J C (1988) Technical trends in the e and c business: The next 10 years. Journal of Construction Engineering and Management, 114(4), pp. 565-576. ISSN 0733-9364

Petkov, I (2022) Optimal decarbonization conditions for buildings & districts: A model-based techno-economic perspective. DSc thesis, ETH Zürich, Switzerland.

Pink, S (2022) The gender of smart charging. Buildings & Cities, 3(1), pp. 488-502. ISSN 2632-6655

Pirooz Far Poorang, A E (2008) Mass-constomisation: The application on design, fabrication and implementation (DFI) processes of building envelopes. PhD thesis, University of Sheffield, UK.

Pittri, H; Agyekum, K; Kukah, A S; Asamoah, E; Gasue, R and Botchway, B (2026) Adoption strategies for health and safety technologies in the construction industry. Construction Economics and Building, 26(1), ISSN 2204-9029

Plemmons, J K (1995) Materials management process measures and benchmarking in the industrial construction industry. PhD thesis, Clemson University, USA.

Pocobelli, D P (2021) Heritage building information model (BIM) for scientific data. PhD thesis, University College London, UK.

Pocock, J B; Kuennen, S T; Gambatese, J and Rauschkolb, J (2006) Constructability state of practice report. Journal of Construction Engineering and Management, 132(4), pp. 373-383. ISSN 0733-9364

Popovic, D (2020) The development and use of product platforms in single-family industrialized house building. PhD thesis, Jönköping University, Sweden.

Potseluyko Amobi, L (2021) Improving business and technical operations within timber frame self-build housing sector by applying integrated VR/AR and BIM technologies. PhD thesis, Teesside University, UK.

Pout, C and Hitchin, E R (2009) Future environmental impacts of room air-conditioners in Europe. Building Research & Information, 37(4), pp. 358-368. ISSN 0961-3218

Prabhakaran, A; Mahamadu, A M; Mahdjoubi, L; Booth, C and Aigbavboa, C (2023) Virtual reality utility and usefulness in the furniture, fixture and equipment sector: A validation of interactive and distributed immersion. Smart and Sustainable Built Environment, 12(4), pp. 787-819. ISSN 2046-6099

Primdahl, M B; Forman, M; Frandsen, A F; Pihl, D and Nielsen, A K B (2022) Does the enactment of information and communications technology agreements in a digital construction organisation impact the mental work environment? In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Pulkka, L and Junnila, S (2015) Gravitational slingshot analogy of discontinuous sustainability innovation in the construction industry. Construction Innovation, 15(4), pp. 409-427. ISSN 1471-4175

Purushothaman, M B and Gedara, K M (2025) Smart vision-based analysis and error deduction of human pose to reduce musculoskeletal disorders in construction. Smart and Sustainable Built Environment, 14(5), pp. 1339-1368. ISSN 2046-6099

Pärn, E A and Edwards, D (2017) Vision and advocacy of optoelectronic technology developments in the AECO sector. Built Environment Project and Asset Management, 7(3), pp. 330-348. ISSN 2044-124X

Qi, L; Wong, P S P and Holdsworth, S (2024) Towards understanding the impact of the perceptions about construction innovation on advanced technology adoption. International Journal of Construction Management, 24(14), pp. 1521-1529. ISSN 1562-3599

Qi, Liang (2022) Towards understanding the diffusion and adoption of innovation in the Australian construction industry. PhD thesis, RMIT University, Australia.

Rahman, S; Perera, S; Odeyinka, H and Bi, Y (2008) A conceptual knowledge-based cost model for optimizing the selection of materials and technology for building design. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Raisbeck, P (2017) Tribes, warlords and transformers: An institutional logics model of the architectural profession. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Raisbeck, P (2019) Space oddity: Spatial design strategies and work place design. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Raisbeck, P; Millie, R and Maher, A (2010) Assessing integrated project delivery: A comparative analysis of IPD and alliance contracting procurement routes. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ram, J; Afridi, N K and Khan, K A (2019) Adoption of big data analytics in construction: Development of a conceptual model. Built Environment Project and Asset Management, 9(4), pp. 564-579. ISSN 2044-124X

Ramanayaka, C D E; Olatunji, O A and Weerasuriya, A U (2022) Motivating immersive BIM uptake through user attitude: Analysis of initial solution using design science approach. Built Environment Project and Asset Management, 12(4), pp. 630-648. ISSN 2044-124X

Ramani, P V and Lingan, L K (2022) Developing a lean model to reduce the design process cost of gas insulated switchgear foundation using value stream mapping–a case study. International Journal of Construction Management, 22(4), pp. 669-677. ISSN 1562-3599

Ramezanpour Jirandeh, R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: A novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Ramli, H; Azizi, Z; Thurairajah, N and Roslan, S B (2022) Urban decarbonisation: A multi-level perspective on energy consumption behaviour in sustainable smart cities. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Rashed, A and Mutis, I (2023) Trends of integrated project delivery implementations viewed from an emerging innovation framework. Engineering, Construction and Architectural Management, 30(3), pp. 989-1014. ISSN 0969-9988

Rasheed, U; Ordaz, C; Xu, X; Hu, Y; Li, S; Sutton, T and Cai, J (2025) Understanding the impact of teleoperation technology on the construction industry: Adoption dynamics, workforce perception, and the role of broader workforce participation. Journal of Construction Engineering and Management, 151(7): 04025085, ISSN 0733-9364

Rashid, R A (1998) A model for an effective implementation of the government technology transfer policy in the Malaysian construction industry. PhD thesis, University of Reading, UK.

Rashidi, A; Woon, G L; Dasandara, M; Bazghaleh, M and Pasbakhsh, P (2025) Smart personal protective equipment for intelligent construction safety monitoring. Smart and Sustainable Built Environment, 14(3), pp. 835-858. ISSN 2046-6099

Rashidi, A; Yong, W Y; Maxwell, D and Fang, Y (2023) Construction planning through 4D BIM-based virtual reality for light steel framing building projects. Smart and Sustainable Built Environment, 12(5), pp. 1153-1173. ISSN 2046-6099

Rathnayake, A and Middleton, C (2023) Systematic review of the literature on construction productivity. Journal of Construction Engineering and Management, 149(6): 03123005, ISSN 0733-9364

Razkenari, M A (2019) Framework for measuring industrialized construction maturity. PhD thesis, University of Florida, USA.

Rehan, A; Thorpe, D and Heravi, A (2025) An empirical study on project managers' leadership behavioral practices impacting project success–the Australian construction sector. International Journal of Construction Education and Research, 21(2), pp. 164-188. ISSN 1557-8771

Rekola, M; Kojima, J and Mäkeläinen, T (2010) Towards integrated design and delivery solutions: Pinpointed challenges of process change. Architectural Engineering and Design Management, 6(4), pp. 264-278. ISSN 1745-2007

Rethinam, A; Shivakumar, V D; Harish, L; Abhishek, M B; Ramana, G V; Madhusudana, R; Sah, R and Manjini, S (2015) Grain refinement of c-mn steel through thermo-mechanical processing. Journal of Engineering, Design and Technology, 13(2), pp. 282-297.

Reyes Veras, P (2023) Adoption of the big data concept in the construction industry. PhD thesis, University of Wolverhampton, UK.

Reyes Veras, P; Renukappa, S and Suresh, S (2022) Awareness of big data concept in the Dominican Republic construction industry: An empirical study. Construction Innovation, 22(3), pp. 465-486. ISSN 1471-4175

Reynoso Vanderhorst, H D; Heesom, D; Suresh, S; Renukappa, S and Burnham, K (2023) Barriers and cost model of implementing unmanned aerial system (uas) services in a decentralised system: Case of the Dominican Republic. Construction Innovation, 23(4), pp. 833-857. ISSN 1471-4175

Rezgui, Y and Zarli, A (2006) Paving the way to the vision of digital construction: A strategic roadmap. Journal of Construction Engineering and Management, 132(7), pp. 767-776. ISSN 0733-9364

Riaz, Z; Edwards, D J; Mackenzie, J and Thorpe, T (2006) Emerging information, communication and technology systems applied to construction vehicle safety. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ritter, V (2012) Optimizing the combination of active and passive building components in refurbishment projects to allow for net-zero emission architecture. DSc thesis, ETH Zürich, Switzerland.

Rizzi, Dario (2025) Tools for sustainable design strategies: Optimization of integrated BIM-blockchain technologies and protocols for the application of minimum environmental criteria. PhD thesis, Università degli Studi di Ferrara, Italy.

Robinson, A; Austin, S and Gibb, A (2011) Efficiencies in design and manufacturing for construction using shipping containers. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Robinson, A C (2017) ISBU modular construction and building design prototypes. EngD thesis, Loughborough University, UK.

Robinson, H S; Carrillo, P M; Anumba, C J and Al-Ghassani, A M (2004) Developing a business case for knowledge management: The IMPaKT approach. Construction Management and Economics, 22(7), pp. 733-743. ISSN 01446193

Robinson, M J (2021) The delusion of innovations? An investigation into micro-level factors to an effective macro-level diffusion of Building Information Modelling in the UK. PhD thesis, Edinburgh Napier University, UK.

Robinson, W G; Chan, P W and Lau, T (2016) Sensors and sensibility: Examining the role of technological features in servitizing construction towards greater sustainability. Construction Management and Economics, 34(1), pp. 4-20. ISSN 01446193

Rodrigo, M N N; Perera, S; Senaratne, S and Jin, X (2022) Systematic development of a data model for the blockchain-based embodied carbon (bec) estimator for construction. Engineering, Construction and Architectural Management, 29(9), pp. 3311-3330. ISSN 0969-9988

Rojas Molina, E M (1997) Developing a web-centric process to support inspection. PhD thesis, University of Colorado at Boulder, USA.

Rosenfeld, Y (1994) Innovative construction methods. Construction Management and Economics, 12(6), pp. 521-541. ISSN 01446193

Roshani, D (2005) Integrated collaborative building design using internet technology. PhD thesis, University of Nottingham, UK.

Roskams, M J and Haynes, B P (2021) Testing the relationship between objective indoor environment quality and subjective experiences of comfort. Building Research & Information, 49(4), pp. 387-398. ISSN 0961-3218

Rouhi, S (2011) Framework for owner's project requirements for total structural systems (OPRTSS). PhD thesis, Georgia Institute of Technology, USA.

Roupé, M (2013) Development and implementations of virtual reality for decision-making in urban planning and building design. PhD thesis, Chalmers University of Technology, Sweden.

Roupé, M; Johansson, M; Maftei, L; Lundstedt, R and Viklund-Tallgren, M (2020) Virtual collaborative design environment: Supporting seamless integration of multitouch table and immersive VR. Journal of Construction Engineering and Management, 146(12): 04020132, ISSN 0733-9364

Roy, R; Brown, J and Gaze, C (2003) Re-engineering the construction process in the speculative house-building sector. Construction Management and Economics, 21(2), pp. 137-146. ISSN 01446193

Roy, R and Gaze, C (1999) Introduction of new technology for a customer-focused speculative housebuilding industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Rutten, M E J; Dorée, A G and Halman, J I M (2009) Innovation and interorganizational cooperation: A synthesis of literature. Construction Innovation, 9(3), pp. 285-297. ISSN 1471-4175

Sackey, E (2014) A Sociotechnical Systems Analysis of Building Information Modelling (STSaBIM) Implementation in Construction Organisations. PhD thesis, Loughborough University, UK.

Sadafi, N and Sharifi, M (2019) A study of the concept of Iranian traditional architecture in bazaars and shopping centres. Journal of Construction in Developing Countries, 23(2), pp. 151-165. ISSN 1823-6499

Sadiq, M and Khalfan, M M A (2025) Transitioning to a circular economy in the construction demolition industry: A bibliometric analysis. Built Environment Project and Asset Management, 15(3), pp. 518-534. ISSN 2044-124X

Saghatforoush, E; Hosseini Nourzad, S H; Zareravasan, A and Jadidoleslami, S (2023) Enablers for BIM application in architectural design: A robust exploratory factor analysis approach. International Journal of Construction Management, 23(9), pp. 1549-1559. ISSN 1562-3599

Salama, T and Said, H (2025) Agility assessment framework for modular and offsite construction. Construction Innovation, 25(2), pp. 193-223. ISSN 1471-4175

Salhab, D; Pourrahimian, E and Hamzeh, F (2026) Integrating ontologies and AI for enhanced workspace planning and knowledge management. Journal of Construction Engineering and Management, 152(4): 04026031, ISSN 0733-9364

Salih, F and El-Adaway, I H (2024) Quantifying the impact of technology utilization on schedule and cost performance in construction projects. Journal of Construction Engineering and Management, 150(8): 04024078, ISSN 0733-9364

Samarasingha, D.; Ranadewa, K. A. T. O. and Parameswaran, A. (2026) Extended reality-integrated construction progress monitoring in the construction industry. Journal of Engineering, Design and Technology, 24(5), pp. 1135-1155. ISSN 1726-0531

Sampson Mamphweli, N and Leroy Meyer, E (2013) Performance monitoring system for a biomass gasifier. Journal of Engineering, Design and Technology, 11(1), pp. 7-18. ISSN 1726-0531

Sandberg, N H and Bratteb, H (2012) Analysis of energy and carbon flows in the future Norwegian dwelling stock. Building Research & Information, 40(2), pp. 123-139. ISSN 0961-3218

Sangiorgio, Valentino (2019) Development of a decision support system for the structural degradation analysis of RC buildings supported by user-reported data and modern information technologies. PhD thesis, Politecnico di Bari, Italy.

Sargent, K; Hyland, P and Sawang, S (2012) Factors influencing the adoption of information technology in a construction business. Construction Economics and Building, 12(2), pp. 72-86. ISSN 2204-9029

Sassi, P (2009) Closed loop material cycle construction: defining and assessing closed loop material cycle construction as a component of a comprehensive approach to sustainable material design in the context of sustainable building. PhD thesis, Cardiff University, UK.

Satish, S. and Umar, T. (2026) Bridging innovation and practice: Assessing the readiness for 3D printing in construction. Engineering, Construction and Architectural Management, 33(7), pp. 6014-6038. ISSN 0969-9988

Sayed Suleiman, R (2019) Understanding site offices challenges to communicate and exchange information using technology in UK: main contractor perspective. PhD thesis, University of Salford, UK.

Schiffer, A; Greene, M; Khalid, R; Foulds, C; Vidal, C A; Chatterjee, M; Dhar-Bhattacharjee, S; Edomah, N; Sule, O; Palit, D and Yesutanbul, A N (2022) Brokering gender empowerment in energy access in the Global South. Buildings & Cities, 3(1), pp. 619-637. ISSN 2632-6655

Schweber, L and Leiringer, R (2012) Beyond the technical: A snapshot of energy and buildings research. Building Research & Information, 40(4), pp. 481-492. ISSN 0961-3218

Sepasgozar, S M E (2023) Construction digital technology assimilation and absorption capability using measurement invariance of composite modeling. Journal of Construction Engineering and Management, 149(7): 04023041, ISSN 0733-9364

Sepasgozar, S M E; Davis, S; Loosemore, M and Bernold, L (2018) An investigation of modern building equipment technology adoption in the Australian construction industry. Engineering, Construction and Architectural Management, 25(8), pp. 1075-1091. ISSN 0969-9988

Sepasgozar, S M E; Loosemore, M and Davis, S R (2016) Conceptualising information and equipment technology adoption in construction: A critical review of existing research. Engineering, Construction and Architectural Management, 23(2), pp. 158-176. ISSN 0969-9988

Sepasgozar, Samad (2015) Technology adoption in construction. PhD thesis, University of New South Wales, Australia.

Serag-Eldin, Gamil M (2010) A conflict management model for architectural design collaboration. PhD thesis, University of California, USA.

Sexton, M; Barrett, P and Aouad, G (2006) Motivating small construction companies to adopt new technology. Building Research & Information, 34(1), pp. 11-22. ISSN 0961-3218

Sexton, M; Goulding, J; Zhang, X; Kagioglou, M; Aouad, G; Cooper, R and Barrett, P (2005) The role of the hycon design-support tool in elevating hybrid concrete as a design option for structural frames. Engineering, Construction and Architectural Management, 12(6), pp. 568-586. ISSN 0969-9988

Seyis, S and Ozkan, S (2024) Benefits and challenges of implementing the common data environments in the construction phase of BIM-based projects. Journal of Construction Engineering and Management, 150(8): 04024091, ISSN 0733-9364

Seyman Guray, T and Kismet, B (2023) Applicability of a digitalization model based on augmented reality for building construction education in architecture. Construction Innovation, 23(1), pp. 193-212. ISSN 1471-4175

Sezer, A A (2016) Construction performance measurement: Site managers in refurbishment projects. PhD thesis, Chalmers University of Technology, Sweden.

Shafei, H; Rahman, R A and Lee, Y S (2025) Evaluating Construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan. Journal of Engineering, Design and Technology, 23(4), pp. 1211-1242. ISSN 1726-0531

Shafei, H; Rahman, R A; Lee, Y S and Che Ibrahim, C K I (2025) Implications of construction 4.0 technologies to enhancing well-being: A fuzzy TOPSIS evaluation. Construction Innovation, 25(1), pp. 131-165. ISSN 1471-4175

Shanbari, H and Issa, R R A (2019) Use of video games to enhance construction management education. International Journal of Construction Management, 19(3), pp. 206-221. ISSN 1562-3599

Shanbari, H A (2016) Evaluating the use of video games in construction management education. PhD thesis, University of Florida, USA.

Sheglabo, J; McGill, T and Dixon, M (2017) An investigation of the factors that impact the intention to adopt and use mICT in the Libyan construction industry. Journal of Construction in Developing Countries, 22(1), pp. 55-74. ISSN 1823-6499

Shehadeh, A; Alshboul, O and Tamimi, M (2025) Quantitative analysis of climate-adaptive pavement technologies: Mitigating environmental impact and enhancing economic viability in urban infrastructure. Journal of Construction Engineering and Management, 151(6): 04025064, ISSN 0733-9364

Shen, W; Liu, Y; Tang, W; Wang, S; Duffield, C F; Hui, F K P and Zhang, L (2024) Configuring success: Unveiling key configurations for enhanced design coordination in hydropower projects. Journal of Construction Engineering and Management, 150(12): 04024173, ISSN 0733-9364

Sherratt, F; Dowsett, R and Sherratt, S (2020) Construction 4.0 and its potential impact on people working in the construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(4), pp. 145-152. ISSN 17514304

Shi, C; Chen, Y; Hua, Y and Tang, Y (2023) Understanding subcontracting organizational arrangements for construction projects in China: Integrating capabilities and uncertainty. Engineering, Construction and Architectural Management, 30(6), pp. 2381-2399. ISSN 0969-9988

Shibeika, A (2014) Diffusion of digital innovation in a project-based firm: Case study of a UK engineering firm. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Shibeika, A and Harty, C (2015) Diffusion of digital innovation in construction: A case study of a UK engineering firm. Construction Management and Economics, 33(5-6), pp. 453-466. ISSN 01446193

Shohet, I M; Wei, H H; Skibniewski, M J; Tak, B and Revivi, M (2019) Integrated communication, control, and command of construction safety and quality. Journal of Construction Engineering and Management, 145(9): 04019051, ISSN 0733-9364

Sibanda, V; Mpofu, K and Trimble, J (2021) Methodology for the design of a reconfigurable guillotine shear and bending press machine (rgs&BPM). Journal of Engineering, Design and Technology, 19(6), pp. 1317-1343. ISSN 1726-0531

Sievert Jr., R W (2000) A model for managing co -marketing alliances. PhD thesis, Northwestern University, USA.

Silva, Rodrigo Rogerio Cerqueira da (2025) 'Was it worth it in the end'? A study of civil engineering graduates engineering graduates from three private universities in São Paulo. PhD thesis, Universidade Estadual de Campinas, Brazil.

Silverio Fernández, M A (2019) Implementation of smart devices in the construction industry. PhD thesis, University of Wolverhampton, UK.

Silverio-Fernandez, M A; Renukappa, S and Suresh, S (2019) Evaluating critical success factors for implementing smart devices in the construction industry: An empirical study in the Dominican Republic. Engineering, Construction and Architectural Management, 26(8), pp. 1625-1640. ISSN 0969-9988

Silverio-Fernández, M A; Renukappa, S and Suresh, S (2021) Strategic framework for implementing smart devices in the construction industry. Construction Innovation, 21(2), pp. 218-243. ISSN 1471-4175

Simon, S and O’brien, W (2023) Pilot study to measure the energy and carbon impacts of teleworking. Buildings & Cities, 4(1), pp. 174-192. ISSN 2632-6655

Singh, V (2025) Digitalization, BIM ecosystem, and the future of built environment: How widely are we exploring the different possibilities? Engineering, Construction and Architectural Management, 32(7), pp. 4900-4917. ISSN 0969-9988

Singh, V and Bolpagni, M (2023) Effects of trigger events on innovation behaviour: Insights from the data collected from construction professionals during COVID-19. Construction Management and Economics, 41(7), pp. 587-607. ISSN 01446193

Singh, V and Holmström, J (2015) Needs and technology adoption: Observation from BIM experience. Engineering, Construction and Architectural Management, 22(2), pp. 128-150. ISSN 0969-9988

Skibniewski, M J and Chao, L C (1992) Evaluation of advanced construction technology with AHP method. Journal of Construction Engineering and Management, 118(3), pp. 577-593. ISSN 0733-9364

Slaughter, E S (1993) Builders as sources of construction innovation. Journal of Construction Engineering and Management, 119(3), pp. 532-549. ISSN 0733-9364

Smith, B A V (2016) Assessment of carbon and nutrient export from a peatland windfarm construction site. PhD thesis, University of Glasgow, UK.

Smith, P (2001) Information technology and the QS practice. Construction Economics and Building, 1(1), pp. 1-21. ISSN 2204-9029

Soemardi, B W; Kusuma, B; Pribadi, K S and Yuliar, S (2021) Technological capabilities of medium-sized contractors in Indonesia. Journal of Construction in Developing Countries, 26(2), pp. 1-15. ISSN 1823-6499

Soetanto, R; Dainty, A R J; Price, A D F and Glass, J (2003) Utilizing socio-technical systems design principles to implement new ICT systems. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Sohal, K; Renukappa, S; Suresh, S; Georgakis, P and Stride, N (2025) The uptake of digital twins in delivering infrastructure sector projects. Smart and Sustainable Built Environment, 14(3), pp. 794-809. ISSN 2046-6099

Solanki, A; Sarkar, D and Shah, D (2024) Evaluation of factors affecting the effective implementation of internet of things and cloud computing in the construction industry through waspas and TOPSIS methods. International Journal of Construction Management, 24(2), pp. 226-239. ISSN 1562-3599

Solnosky, R L (2013) Integrated structural process model: An inclusive non-material specific approach to determining the required tasks and information exchanges for structural building information modeling. PhD thesis, Pennsylvania State University, USA.

Souza, Flávia Rodrigues de (2015) The design management process into real estate developers companies. PhD thesis, Universidade de São Paulo, Brazil.

Stafford, A (2011) Long-term monitoring and performance of ground source heat pumps. Building Research & Information, 39(6), pp. 566-573. ISSN 0961-3218

Stefańska, A; Cygan, M; Batte, K and Pietrzak, J (2021) Application of timber and wood-based materials in architectural design using multi-objective optimisation tools. Construction Economics and Building, 21(3), pp. 105-121. ISSN 2204-9029

Steinhardt, D; Manley, K; Bildsten, L and Widen, K (2020) The structure of emergent prefabricated housing industries: A comparative case study of Australia and Sweden. Construction Management and Economics, 38(6), pp. 483-501. ISSN 01446193

Stevenson, F; Baborska-Narozny, M and Chatterton, P (2016) Resilience, redundancy and low-carbon living: Co-producing individual and community learning. Building Research & Information, 44(7), pp. 789-803. ISSN 0961-3218

Stewart, P (2001) The role of e-commerce systems for the construction industry. Construction Economics and Building, 1(2), pp. 24-36. ISSN 2204-9029

Stewart, R A (2003) Lifecycle management of information technology (IT) projects in construction. PhD thesis, Griffith University, Australia.

Stoyell, J L (2004) Eco-design decision-making: towards sustainable engineering design of large made-to-order products. PhD thesis, University of Newcastle upon Tyne, UK.

Strengers, Y; Dahlgren, K and Nicholls, L (2022) Emerging technologies' impacts on 'man caves' and their energy demand. Buildings & Cities, 3(1), pp. 503-517. ISSN 2632-6655

Strengers, Y; Gram-Hanssen, K; Dahlgren, K and Aagaard, L K (2022) Energy, emerging technologies and gender in homes. Buildings & Cities, 3(1), pp. 842-853. ISSN 2632-6655

Sulaiman, M J (1997) Intesite: Intelligent site layout planning within an object-oriented integrated construction environment. PhD thesis, University of Salford, UK.

Sun, M (1993) Technology transfer, architectural design and integrated building design systems. PhD thesis, University of Newcastle upon Tyne, UK.

Sun, Q; He, L; Ding, F; Chen, X; Ding, L and Tu, Y (2021) Modeling and analysis of structure parameters on the lifting force for power catwalk. Journal of Engineering, Design and Technology, 19(1), pp. 187-202. ISSN 1726-0531

Sun, W (2000) Designing an object-oriented geographic information system application for integration of building construction project information. PhD thesis, University of Florida, USA.

Sun, W (2023) A self-localized smart hardhat system for construction 4.0. PhD thesis, Columbia University, USA.

Sunikka-Blank, M; Galvin, R and Behar, C (2018) Harnessing social class, taste and gender for more effective policies. Building Research & Information, 46(1), pp. 114-126. ISSN 0961-3218

Suprun, Emiliya (2018) An integrated systems model of construction innovation in the Russian federation. PhD thesis, Griffith University, Russia.

Swai, L L P and Arewa, A O (2018) Potentiality of emerging technologies to minimise late-payments quandary in construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Swallow, M and Zulu, S L (2025) Investigating the implementation of immersive technologies within on-site construction safety processes. Journal of Engineering, Design and Technology, 23(1), pp. 323-343. ISSN 1726-0531

Szydlik, C C (2014) Identifying and overcoming the barriers to sustainable construction. PhD thesis, Missouri University of Science and Technology, USA.

Talebi, S; Wu, S; Al-Adhami, M; Shelbourn, M and Serugga, J (2022) The development of a digitally enhanced visual inspection framework for masonry bridges in the UK. Construction Innovation, 22(3), pp. 624-646. ISSN 1471-4175

Tambo, T (2010) Smooth operator: Mobile information technology for improved flow at the construction site. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Tang, X.; Zhang, S.; Wang, M. and Sepasgozar, S. M. E. (2026) Understanding the construction digital technology assimilation process in AEC companies: Exploration based on grounded theory and verification of SEM. Journal of Construction Engineering and Management, 152(9): 04026143, ISSN 0733-9364

Tangwe, S L; Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(4), pp. 739-751.

Tanyer, A M (2004) Implementation barriers of computer integrated construction: A usability perspective. PhD thesis, University of Salford, UK.

Tasselli, Nicola (2023) BIM digital integration for existing buildings: Processes and tools to foster technological innovation of added-value building systems applied to the 20th century built asset in emilia-romagna. PhD thesis, Università degli Studi di Ferrara, Italy.

Tatum, C B (2011) Core elements of construction engineering knowledge for project and career success. Journal of Construction Engineering and Management, 137, pp. 745-750. ISSN 0733-9364

Tatum, C B; Vorster, M and Klingler, M (2006) Innovations in earthmoving equipment: New forms and their evolution. Journal of Construction Engineering and Management, 132(9), pp. 987-997. ISSN 0733-9364

Tavallaei, R; Mashayekhi, A; Harrison, N; Talebian, M and Moser, R (2022) BIM adoption: A case of institutional pressures and top management support. Journal of Construction Engineering and Management, 148(9): 04022084, ISSN 0733-9364

Ter Huurne, R; Scholtenhuis, L O and Dorée, A (2022) Change triggers in early innovation stages: How technology pilots enable routine reflection. Journal of Construction Engineering and Management, 148(9): 05022005, ISSN 0733-9364

Terry, N and Palmer, J (2016) Trends in home computing and energy demand. Building Research & Information, 44(2), pp. 175-187. ISSN 0961-3218

Tezel, A and Koskela, L (2023) Off-site construction in highways projects: Management, technical, and technology perspectives from the United Kingdom. Construction Management and Economics, 41(6), pp. 475-499. ISSN 01446193

Thajudeen, S; Elgh, F and Lennartsson, M (2022) A framework supporting mixed production strategies in platform development: A case study in post and beam building system. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Thalagala Achchi Maddumage, Kasun G (2021) Methodology to predict construction contractors' performance using non-price measures. PhD thesis, Western Sydney University, Australia.

Thavi, R; Jhaveri, R; Narwane, V; Gardas, B and Jafari Navimipour, N (2024) Role of cloud computing technology in the education sector. Journal of Engineering, Design and Technology, 22(1), pp. 182-213. ISSN 1726-0531

Thuesen, C and Hvam, L (2011) Efficient on-site construction: Learning points from a German platform for housing. Construction Innovation, 11(3), pp. 338-355. ISSN 1471-4175

Tian, L; Stuart, G and Ozawa-Meida, L (2026) Smart faces: Using communication strategies to optimize technical information flow in middle-out facilities management. Building Research & Information, 54(1), pp. 44-58. ISSN 0961-3218

Tian, Y (2022) Financing infrastructure through blockchain tokenization. PhD thesis, University of Florida, USA.

Tinarwo, B; Rahimian, F and Abi Ghanem, D (2025) Towards a trajectory for sustainable policies and market strategies governing building lifecycle energy performance. Smart and Sustainable Built Environment, 14(1), pp. 140-162. ISSN 2046-6099

Tonetto, L M; Brust-Renck, P G; Ruecker, S; Fogliatto, F S and Pacheco, D A D J (2021) Differences in thinking styles across professionals with different academic backgrounds when developing a product. Architectural Engineering and Design Management, 17(1-2), pp. 3-16. ISSN 1745-2007

Tonna, Ren P (2021) How stakeholders experience and value the sustainable design elements of a residential high-rise building. PhD thesis, Griffith University, Australia.

Toole, T M (1994) Task and environmental uncertainty and adoption of technological innovations by home builders. PhD thesis, Massachusetts Institute of Technology, USA.

Toole, T M (1998) Uncertainty and home builders' adoption of technological innovations. Journal of Construction Engineering and Management, 124(4), pp. 323-332. ISSN 0733-9364

Trahan Jr., G N (2009) A comparison of the effectiveness of two alternative instructional strategies for teaching basic construction surveying concepts. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Trinder, L (2018) Design for manufacture and assembly: Its benefits and risks in the UK water industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(4), pp. 152-163. ISSN 17514304

Trinius, W and Sjöström, C (2005) Service life planning and performance requirements. Building Research & Information, 33(2), pp. 173-181. ISSN 0961-3218

Troje, D and Sloot, R (2023) Technology adoption in public client organisations: Institutional perspectives from Sweden and the Netherlands. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Tsz Wai, C; Wai Yi, P; Ibrahim Olanrewaju, O; Abdelmageed, S; Hussein, M; Tariq, S and Zayed, T (2023) A critical analysis of benefits and challenges of implementing modular integrated construction. International Journal of Construction Management, 23(4), pp. 656-668. ISSN 1562-3599

Tuholski, S J (2008) Transformation, flow, and value constellations in AEC projects. PhD thesis, University of California, Berkeley, USA.

Turk, Ž (2023) Structured analysis of ICT adoption in the European construction industry. International Journal of Construction Management, 23(5), pp. 756-762. ISSN 1562-3599

Turner, J; Daniel, E I and Chinyio, E (2024) The race to net zero: Is the UK falling behind in research to other countries when it comes to sustainability in residential housing? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Tutt D, H C (2013) Journeys through the cave: The use of 3D immersive environments for client engagement practices in hospital design. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Tweed, C (2013) Socio-technical issues in dwelling retrofit. Building Research & Information, 41(5), pp. 551-562. ISSN 0961-3218

Underwood, J and Isikdag, U (2011) Emerging technologies for BIM 2.0. Construction Innovation, 11(3), pp. 252-258. ISSN 1471-4175

Uusitalo, P; Peltokorpi, A; Seppänen, O and Alhava, O (2024) Towards systemic transformation in the construction industry: A complex adaptive systems perspective. Construction Innovation, 24(7), pp. 341-368. ISSN 1471-4175

Valinejadshoubi, M; Sacks, R; Valdivieso, F; Corneau-Gauvin, C and Kaptué, A (2025) Digital twin construction in practice: A case study of closed-loop production control integrating BIM, GIS, and IoT sensors. Journal of Construction Engineering and Management, 151(11): 05025014, ISSN 0733-9364

Vallis, S A; Karvonen, A and Eriksson, E (2023) Pandemics and the built environment: A human-building interaction typology. Buildings & Cities, 4(1), pp. 158-173. ISSN 2632-6655

Van Egmond-De Wilde De Ligny, E L C and Mohammadi, M (2011) Innovations in domotics: Fulfilling potential or hampered by prevailing technological regime? Construction Innovation, 11(4), pp. 470-492. ISSN 1471-4175

Van de Ruitenbeek, H K M (2012) Evolutionary, unconscious design support for the architectural, engineering and construction industry. PhD thesis, Delft University of Technology, Netherlands.

Vaz, D; Al Bizri, S and Gray, C (2008) The management of the design of modern curtain wall cladding systems. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Vaz-Serra, P and Edwards, P (2021) Addressing the knowledge management "nightmare" for construction companies. Construction Innovation, 21(2), pp. 300-320. ISSN 1471-4175

Venkataraman, V (2017) Investigating the impact of project management factors on green building project delivery using link analysis and system dynamics techniques. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Vernikos, V K (2016) Realising offsite construction in the civil engineering and infrastructure sector. PhD thesis, Loughborough University, UK.

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Vinodh, S; Devadasan, S R and Shankar, C (2010) Design agility through computer aided design. Journal of Engineering, Design and Technology, 8(1), pp. 94-106. ISSN 1726-0531

Vinodh, S; Kamala, V and Jayakrishna, K (2015) Application of fuzzy axiomatic design methodology for selection of design alternatives. Journal of Engineering, Design and Technology, 13(1), pp. 2-22.

Vinodh, S and Rathod, G (2014) Application of life cycle assessment and Monte Carlo simulation for enabling sustainable product design. Journal of Engineering, Design and Technology, 12(3), pp. 307-315.

Vinodh, S and Ravikumar, R (2012) Application of probabilistic finite element analysis for crane hook design. Journal of Engineering, Design and Technology, 10(2), pp. 255-275. ISSN 1726-0531

Vinodh, S; Selvaraj, T and Praveen, T (2012) Design and development of agile product development cycle for rotary switches. Journal of Engineering, Design and Technology, 10(3), pp. 380-396. ISSN 1726-0531

Vitry, C; Sage, D and Dainty, A (2016) “Take care of this house”: Affects matter in construction innovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Voordijk, H and Adriaanse, A (2016) Engaged scholarship in construction management research: The adoption of information and communications technology in construction projects. Construction Management and Economics, 34(7-8), pp. 536-551. ISSN 01446193

Vorasubin, P and Chareonngam, C (2007) Strategic assets driving financial capability of Thai construction firms. Journal of Financial Management of Property and Construction, 12(2), pp. 87-94. ISSN 1366-4387

Wafaei Baneh, K; Wafaei Baneh, B; Osman, A; Mostafapour, O and Bradosty, Z R (2023) Regeneration and documentation of historic geometric islamic patterns via HBIM: A case study of Choli minaret, Kurdistan region. International Journal of Building Pathology and Adaptation, 41(2), pp. 347-363. ISSN 23984708

Wafai, M H and Aouad, G (2023) Innovation transfer in construction: Re-interpreting factor-based research from the perspective of the social construction of technology (scot). Construction Innovation, 23(5), pp. 1323-1344. ISSN 1471-4175

Wahab, A (2024) Integrating building information modeling (BIM) and blockchain technology in the pre-construction planning processes. PhD thesis, Mississippi State University, USA.

Wall, J and Ahmed, V (2004) E-learning & pedagogical challenges in construction management: Bridging the gap between academia and industry. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Walzer, A N; Tan, T; Graser, K and Hall, D M (2025) Bug or feature? Institutional misalignments between construction technology and venture capital. Construction Management and Economics, 43(2), pp. 130-152. ISSN 0144-6193

Wang, K; Guo, F; Zhang, C; Hao, J and Wang, Z (2025) Unlocking determinants of smart construction: An integrated model of utaut2, ttf, and perceived risk for IoT acceptance in AEC industry. Engineering, Construction and Architectural Management, 32(8), pp. 5394-5428. ISSN 0969-9988

Wang, L-H (2005) Vertical process integration in design and manufacturing of hardwood products. PhD thesis, University of Missouri - Columbia, USA.

Wang, Mudan (2023) Digital technology adoption for improving efficiency of prefabrication construction in China: An application of laser scanning. PhD thesis, University of New South Wales, Australia.

Wang, W; Gao, S; Mi, L; Xing, J; Shang, K; Qiao, Y; Fu, Y; Ni, G and Xu, N (2021) Exploring the adoption of BIM amidst the COVID-19 crisis in China. Building Research & Information, 49(8), pp. 930-947. ISSN 0961-3218

Wang, X; Hasanzadeh, S; Short, K M; Fiori, C M and Sands, K S (2024) A pedagogical framework for enhancing the entrepreneurial leadership mindsets of construction students: A pilot study. International Journal of Construction Education and Research, 20(4), pp. 464-482. ISSN 1557-8771

Wang, Z; Hu, T; Liu, J; Xia, B; Bao, Z and Zhao, N (2025) The spatial correlation network and driving factors of economic resilience in the construction sector: Evidence from China. Construction Management and Economics, 43(11), pp. 961-982. ISSN 0144-6193

Wanous, M (2000) A neurofuzzy expert system for competitive tendering in civil engineering. PhD thesis, University of Liverpool, UK.

Waqar, A; Othman, I and Mansoor, M S (2026) Effect of human-centric technology adoption on sustainable construction success: A partial least square modeling. International Journal of Building Pathology and Adaptation, 44(1), pp. 36-54. ISSN 2398-4708

Watanabe, R; Watanabe, T and Skitmore, M (2025) Evaluating the implementation of innovative technology in japan's bidding system: A dynamic stackelberg game theoretical analysis. Construction Management and Economics, 43(9), pp. 657-684. ISSN 0144-6193

Watson, N (2016) Developing material selection strategies to improve the embodied impacts of buildings. EngD thesis, University of Bath, UK.

Watt, K A (1990) Nineteenth century brickmaking innovations in britain: Building and technological change. PhD thesis, University of York, UK.

Watts, C J (2002) In-service training for computer-aided design in building surveying. PhD thesis, De Montfort University, UK.

Webb, N (2012) Digital re-analysis of lost or unbuilt architecture. PhD thesis, University of Liverpool, UK.

Welfare, K S (2020) Perceptions of construction and the human factors climate through mixed methods. PhD thesis, University of Colorado at Boulder, USA.

White, T; Ariaratnam, S T and Michael, J (2012) Subterranean infrastructure reconnaissance for manmade and natural hazards and disasters. International Journal of Disaster Resilience in the Built Environment, 3(1), pp. 66-86. ISSN 1759-5916

Whyte, J and Bouchlaghem, D (2002) Implementation of VR systems: A comparison between the early adoption of CAD and current uptake of VR. Construction Innovation, 2(1), pp. 3-13. ISSN 1471-4175

Whyte, J; Bouchlaghem, D and Thorpe, T (2002) IT implementation in the construction organization. Engineering, Construction and Architectural Management, 9(5-6), p. 371. ISSN 0969-9988

Whyte, J and Lobo, S (2010) Coordination and control in project-based work: Digital objects and infrastructures for delivery. Construction Management and Economics, 28(6), pp. 557-567. ISSN 1466433X

Widén, K (2006) Innovation diffusion in the construction sector. PhD thesis, Lund University, Sweden.

Widén, K and Hansson, B (2007) Diffusion characteristics of private sector financed innovation in Sweden. Construction Management and Economics, 25(5), pp. 467-475. ISSN 1466433X

Wiesweg, N; Schäpers, P; Bernhold, T and Hartmann, T (2024) On the challenges of inter-organisational data in real estate: The role of knowledge sharing. Engineering, Construction and Architectural Management, 31(1), pp. 247-263. ISSN 0969-9988

Wilkinson, S; Biloria, N and Ralph, P (2020) The technical issues associated with algae building technology. International Journal of Building Pathology and Adaptation, 38(5), pp. 673-688. ISSN 23984708

Williams, J M (1991) Interfaces: Integrating product design and process engineering in manufacturing and construction. PhD thesis, Stanford University, USA.

Williams, P (1995) A regulation evaluation system: A decision support system for the building code of Australia. Construction Management and Economics, 13(3), pp. 197-208. ISSN 01446193

Winch, G (1998) Zephyrs of creative destruction: Understanding the management of innovation in construction. Building Research & Information, 26(5), pp. 268-279. ISSN 0961-3218

Winkler, C; Perez Vico, E and Widén, K (2024) Challenges to business ecosystem alignment when implementing solar photovoltaic systems in the Swedish built environment. Building Research & Information, 52(5), pp. 497-514. ISSN 0961-3218

Winn, K R (2014) Inter-scalar multivariable decision making framework for the architectural envelope. PhD thesis, Rensselaer Polytechnic Institute, USA.

Woksepp, S (2007) Virtual reality in construction tools, methods and processes. PhD thesis, Luleå University of Technology, Sweden.

Won, S (2002) A model for work function characteristics-based prioritization of technologies for capital projects. PhD thesis, University of Texas at Austin, USA.

Wong, C F; Lau, S H; Tan, O K and Yap, J B H (2025) Critical factors influencing the adoption of building information modelling (BIM) using technological adoption framework and structural equation modelling. Engineering, Construction and Architectural Management, 32(2), pp. 967-986. ISSN 0969-9988

Wong, C H (2007) ICT implementation and evolution: Case studies of intranets and extranets in UK construction enterprises. Construction Innovation, 7(3), pp. 254-273. ISSN 1471-4175

Wu, Z; Zhang, S; Xue, H and Li, V (2025) Identifying the policy configurational conditions for off-site construction development: A case of China. Engineering, Construction and Architectural Management, 32(12), pp. 8524-8547. ISSN 0969-9988

Wu, M; Wang, L; Li, M and Long, H (2015) Alleviating feature fatigue in product development based on the bass model. Journal of Engineering, Design and Technology, 13(3), pp. 350-368.

Wu, S (2004) IT tool for construction process management, process protocol toolkit. PhD thesis, University of Salford, UK.

Wuni, I Y; Shen, G Q; Ogungbile, A J and Ayitey, J Z (2022) Four-pronged decision support framework for implementing industrialized construction projects. Construction Innovation, 22(2), pp. 263-283. ISSN 1471-4175

Wågø, S and Berker, T (2014) Architecture as a strategy for reduced energy consumption? An in-depth analysis of residential practices' influence on the energy performance of passive houses. Smart and Sustainable Built Environment, 3(3), pp. 192-206. ISSN 2046-6099

Xi, J (2013) Evaluating the functional performance of small-scale public demountable buildings. PhD thesis, University of Liverpool, UK.

Xiang, P; Xia, X and Pang, X (2024) An integrated risk assessment method for cross-regional mega construction projects. Engineering, Construction and Architectural Management, 31(6), pp. 2369-2391. ISSN 0969-9988

Xu, J (2021) A human-organization-technology fit model to harness the power of building information modeling in construction project organizations. PhD thesis, University of Hong Kong, Hong Kong.

Xu, S; Zhou, L and Zou, P X W (2024) What influences stakeholders' decision in adopting blockchain-based quality tracking systems in prefabricated construction. Engineering, Construction and Architectural Management, 31(6), pp. 2224-2247. ISSN 0969-9988

Xu, T; Tiong, R L K; Chew, D A S and Smith, N J (2005) Development model for competitive construction industry in the people's republic of China. Journal of Construction Engineering and Management, 131(7), pp. 844-853. ISSN 0733-9364

Xu, Y; Chi, M; Lee, C Y; Chong, H Y and Wu, H (2025) Effects of the blockchain and artificial intelligence on value cocreation in construction projects: A mixed methods study. Journal of Construction Engineering and Management, 151(8): 04025091, ISSN 0733-9364

Xu, Y; Shen, X; Lim, S and Li, X (2021) Three-dimensional object detection with deep neural networks for automatic as-built reconstruction. Journal of Construction Engineering and Management, 147(9): 04021098, ISSN 0733-9364

Xue, X; Tan, X and Fan, H (2026) Mapping the trajectories of digital technology innovation in the construction industry: An integrated spnp and louvain approach. Engineering, Construction and Architectural Management, 33(1), pp. 477-508. ISSN 0969-9988

Xue, H; Zhang, S; Chen, J; Cong, W; Wu, G and Zhao, X (2024) Effects of organizational elements on emerging information and construction management technology implementation in building professionals: Moderating role of top management support. Journal of Construction Engineering and Management, 150(10): 04024123, ISSN 0733-9364

Xue, X; Sun, X; Xue, W; Wang, Y and Liao, L (2023) Investigating building information modeling acceptance in the Chinese AECO industry. Engineering, Construction and Architectural Management, 30(9), pp. 4253-4270. ISSN 0969-9988

Xundi, D; Liyin, S; Saixing, Z; Jorge, O J and Xiaoling, Z (2010) Relationship between energy consumption and economic development in construction industry. Journal of Engineering, Design and Technology, 8(3), pp. 257-273. ISSN 1726-0531

Yamaura, J T (2018) The value of cloud computing technology in public transportation construction. PhD thesis, University of Washington, USA.

Yang, W and Lam, P T I (2026) A framework for foundational and transitional value assessment of non-market benefits of a smart government system. Building Research & Information, 54(2), pp. 237-256. ISSN 0961-3218

Yang, K (2018) Sensing workers' responsive behaviors for identifying safety hazards in construction. PhD thesis, University of Nebraska - Lincoln, USA.

Yang, L; Li, Q and Pan, W (2024) A domain model for geometric modeling in support of the automated BIM modeling. Engineering, Construction and Architectural Management, 31(12), pp. 4897-4919. ISSN 0969-9988

Yang, L R (2007) Exploring the links between technology usage and project outcomes. Construction Management and Economics, 25(10), pp. 1041-1051. ISSN 1466433X

Yang, L-R (2003) Influence of technology on project success measures. PhD thesis, University of Texas at Austin, USA.

Yang, X; Jefferson, W and Bulbul, T (2025) Evaluation of construction worker perceptions of wearable proximity sensors during the COVID-19 pandemic. Journal of Construction Engineering and Management, 151(3): 04024217, ISSN 0733-9364

Yang, Y; Wei, Z; Zhang, Z and Xie, H (2025) Modeling the enablers for blockchain technology adoption in the construction supply chain. Journal of Construction Engineering and Management, 151(9): 04025113, ISSN 0733-9364

Yap, J. B. H.; Tan, Z. Y.; Skitmore, M.; Loo, S. C. and Yong, F. Y. Y. (2026) Unmasking green procurement: What drives adoption in developing-country construction? Construction Management and Economics, 44(5), pp. 337-358. ISSN 0144-6193

Yap, J B H; Lee, K P H and Wang, C (2023) Safety enablers using emerging technologies in construction projects: Empirical study in Malaysia. Journal of Engineering, Design and Technology, 21(5), pp. 1414-1440. ISSN 1726-0531

Yap, J B H; Skitmore, M; Lam, C G Y; Lee, W P and Lew, Y L (2024) Advanced technologies for enhanced construction safety management: Investigating Malaysian perspectives. International Journal of Construction Management, 24(6), pp. 633-642. ISSN 1562-3599

Yenisetty, P T and Bahadure, P (2021) Spatial accessibility measures to educational facilities from public transit: A case of Indian cities. Smart and Sustainable Built Environment, 10(2), pp. 258-273. ISSN 2046-6099

Yeomans, S G (2005) ICT-enabled collaborative working methodologies in construction. EngD thesis, Loughborough University, UK.

Yevu, S K; Yu, A T W and Darko, A (2023) Barriers to electronic procurement adoption in the construction industry: A systematic review and interrelationships. International Journal of Construction Management, 23(6), pp. 964-978. ISSN 1562-3599

Yi, H (2022) 4D-printed parametric façade in architecture: Prototyping a self-shaping skin using programmable two-way shape memory composite (twsmc). Engineering, Construction and Architectural Management, 29(10), pp. 4132-4152. ISSN 0969-9988

Yoon, S; Hastak, M and Lee, J (2018) Suitability of intelligent compaction for asphalt pavement quality control and quality assurance. Journal of Construction Engineering and Management, 144(4): 04018006, ISSN 0733-9364

Yu, J; Guo, J; Zhang, Q; Xing, L and Lv, S (2026) Two-stage algorithm for automatic repair of pavement cracks. Engineering, Construction and Architectural Management, 33(1), pp. 144-170. ISSN 0969-9988

Yuan, M; Li, Z; Li, X; Luo, X; Yin, X and Cai, J (2023) Proposing a multifaceted model for adopting prefabricated construction technology in the construction industry. Engineering, Construction and Architectural Management, 30(2), pp. 755-786. ISSN 0969-9988

Yuan, X (2016) A cyber-physical systems (CPS) approach to temporary structures monitoring. PhD thesis, Pennsylvania State University, USA.

Yucel, B and Azhar, S (2024) Investigating critical success factors and risks of construction technology startups: A systematic literature review. International Journal of Construction Management, 24(15), pp. 1655-1667. ISSN 1562-3599

Yun, L; Wan, J; Wang, G; Bai, J and Zhang, B (2020) Exploring the missing link between top management team characteristics and megaproject performance. Engineering, Construction and Architectural Management, 27(5), pp. 1039-1064. ISSN 0969-9988

Yılmaz, M B and Rızvanoğlu, K (2022) Understanding users' behavioral intention to use voice assistants on smartphones through the integrated model of user satisfaction and technology acceptance: A survey approach. Journal of Engineering, Design and Technology, 20(6), pp. 1738-1764. ISSN 1726-0531

Zaher, M; Greenwood, D and Marzouk, M (2018) Mobile augmented reality applications for construction projects. Construction Innovation, 18(2), pp. 152-166. ISSN 1471-4175

Zakeri, S. M.; Ataei, B.; Peymankar, P. and Shafaat, A. (2026) Exploring BIM outsourcing strategies and challenges through mixed-method analysis. Journal of Construction Engineering and Management, 152(8): 04026124, ISSN 0733-9364

Zami, M S (2010) Understanding the factors that influence the adoption of stabilised earth by construction professionals to address the Zimbabwe urban low cost housing crisis. PhD thesis, University of Salford, UK.

Zandee, D; Zutshi, A; Creed, A and Nijhof, A (2024) Aiming for bullseye: A novel gameplan for circular economy in the construction industry. Engineering, Construction and Architectural Management, 31(2), pp. 593-617. ISSN 0969-9988

Zanni, M A; Soetanto, R and Ruikar, K (2017) Towards a BIM-enabled sustainable building design process: Roles, responsibilities, and requirements. Architectural Engineering and Design Management, 13(2), pp. 101-129. ISSN 1745-2007

Zapata-Lancaster, G and Tweed, C (2016) Tools for low-energy building design: An exploratory study of the design process in action. Architectural Engineering and Design Management, 12(4), pp. 279-295. ISSN 1745-2007

Zarghami, S A and Dumrak, J (2026) Integrating cascading effects into risk assessment of metaverse implementation in the built environment. Building Research & Information, 54(2), pp. 216-236. ISSN 0961-3218

Zeinali Kalkhoran, A; Platt, L S; Iovine, N; Brown, S and Pollitt, B (2025) An agent-based modeling approach for infection prevention predesign: simulating the spread of pathogens between humans and the environment in an Intensive Care Unit. Architectural Engineering and Design Management, 21(4), pp. 746-767. ISSN 1745-2007

Zhan, W and Pan, W (2020) Formulating systemic construction productivity enhancement strategies. Journal of Construction Engineering and Management, 146(8): 05020008, ISSN 0733-9364

Zhang, B; Wang, C; Ren, X Z and Xia, B (2026) Evaluating the research and development (R&D) efficiency of the Chinese construction industry. Engineering, Construction and Architectural Management, 33(1), pp. 552-577. ISSN 0969-9988

Zhang, J and Jiang, S (2026) Review of artificial intelligence applications in construction management over the last five years. Engineering, Construction and Architectural Management, 33(1), pp. 361-379. ISSN 0969-9988

Zhang, Y.; Chang, R. D.; Omrany, H.; Zuo, J.; Li, L.; Bamborough, C. E. and Haeusler, H. M. (2026) Exploring professional attitudes on automated construction progress monitoring: A q methodology approach. Engineering, Construction and Architectural Management, 33(15), pp. 386-413. ISSN 0969-9988

Zhang, Q; Liu, Z and Yang, S (2025) Enhancing construction workers' health and safety: Mechanisms for implementing construction 4.0 technologies in construction organizations. Engineering, Construction and Architectural Management, 32(13), pp. 68-103. ISSN 0969-9988

Zhang, W (2021) Construction productivity improvement through industrialized construction methods. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Zhang, X (2019) Application of queuing theory: A decision support model for construction companies in the implementation of 3D printing. PhD thesis, University of Florida, USA.

Zhang, X; Goulding, J S; Sexton, M G; Aouad, G and Kagioglou, M (2006) HyCon: Virtual prototyping in hybrid concrete construction frame design. Construction Innovation, 6(1), pp. 47-60. ISSN 1471-4175

Zhang, X; Sexton, M G; Goulding, J S; Aouad, G and Kagioglou, M (2005) Performance modelling for the design of a hybrid concrete structural frame. Architectural Engineering and Design Management, 1(2), pp. 83-91. ISSN 1745-2007

Zhang, Xueyan (2024) Integrate blockchain to optimize the prefabrication supply chain management. PhD thesis, Griffith University, Australia.

Zhao, D (2015) Exploring construction safety and control measures through electrical fatalities. PhD thesis, Virginia Tech, USA.

Zhao, H (2017) Distributed building information modeling in multidisciplinary collaboration. DSc thesis, ETH Zürich, Switzerland.

Zhao, J (2020) Towards a proactive real-time data-driven musculoskeletal disorders prevention approach in construction. PhD thesis, Pennsylvania State University, USA.

Zhao, Y; Hao, S; Chen, Z; Zhou, X; Zhang, L and Guo, Z (2025) Critical factors influencing the internet of things technology adoption behavior of construction companies: Evidence from China. Engineering, Construction and Architectural Management, 32(2), pp. 760-784. ISSN 0969-9988

Zhong, B; Zhong, W; Wu, H; Guan, Q; Tang, B and M.e Sepasgozar, S (2025) Strategic impacts of blockchain adoption on contractor decisions in competitive construction markets: A game-theoretic approach. Journal of Construction Engineering and Management, 151(12): 04025203, ISSN 0733-9364

Zhou, N; Chang-Richards, A; Wang, K I K and Dirks, K N (2022) Prototyping an IoT-based system for monitoring building indoor environment. Journal of Engineering, Design and Technology, 20(4), pp. 965-992. ISSN 1726-0531

Zhou, S (2024) Platforming for industrialized building: a comparative case study of digitally-enabled product platforms. Building Research & Information, 52(1-2), pp. 4-18. ISSN 0961-3218

Zhou, S; Ng, S T; Lee, S H; Xu, F J and Yang, Y (2020) A domain knowledge incorporated text mining approach for capturing user needs on BIM applications. Engineering, Construction and Architectural Management, 27(2), pp. 458-482. ISSN 0969-9988

Zhou, W; Heesom, D; Georgakis, P and Tah, J H M (2014) User-centred design for collaborative 4D modelling. Construction Innovation, 14(4), pp. 493-517. ISSN 1471-4175

Zhou, X and Wang, Y (2025) Understanding competency requirements in the context of AEC industry informatization: Policy insights from China. Engineering, Construction and Architectural Management, 32(2), pp. 732-759. ISSN 0969-9988

Zhou, Z; Irizarry, J and Li, Q (2013) Applying advanced technology to improve safety management in the construction industry: A literature review. Construction Management and Economics, 31(6), pp. 606-622. ISSN 1466433X

Zhou, Z; Shen, G; Xue, J; Sun, C; Liu, Y; Cong, W; Yu, T and Wang, Y (2025) The formation of citizens' intentions to purchase prefabricated housing in China: The integrating theory of planned behavior and norm activation model. Engineering, Construction and Architectural Management, 32(3), pp. 1759-1780. ISSN 0969-9988

Zhu, J; Chen, J; Jin, W and Li, Q (2025) Developing incentive mechanisms for long-term and short-term technological innovation in major engineering projects using principal-agent theory. Engineering, Construction and Architectural Management, 32(3), pp. 1947-1969. ISSN 0969-9988

Zoleykani, M J; Abbasianjahromi, H; Banihashemi, S; Tabadkani, S A and Hajirasouli, A (2024) Extended reality (XR) technologies in the construction safety: Systematic review and analysis. Construction Innovation, 24(4), pp. 1137-1164. ISSN 1471-4175

Zomer, T; Neely, A; Sacks, R and Parlikad, A (2020) Exploring the influence of socio-historical constructs on BIM implementation: An activity theory perspective. Construction Management and Economics, 39(1), pp. 1-20. ISSN 01446193

Zou, Y; Wu, Y; Guo, B H W; Papadonikolaki, E; Dimyadi, J and Hung, S N (2022) Investigating the New Zealand off-site manufacturing industry's readiness for automated compliance checking. Journal of Construction Engineering and Management, 148(12): 05022013, ISSN 0733-9364

Zuluaga, C M; Albert, A and Arroyo, P (2018) Protecting bridge maintenance workers from falls: Evaluation and selection of compatible fall protection supplementary devices. Journal of Construction Engineering and Management, 144(8): 04018073, ISSN 0733-9364

Zuluaga Santa, C M (2018) Protecting bridge maintenance workers: Evaluating fall protection supplementary devices using virtual prototyping and wearable technology. PhD thesis, North Carolina State University, USA.

Zuppa, D (2009) Model for developing trust in construction management. PhD thesis, University of Florida, USA.

de Ridder, H and Vrijhoef, R (2008) Developing a strategy for 'living buildings': Beyond cradle to cradle with living building concept. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

de Wilde de Ligny, E L C (2000) Technology mapping for technology management. The development of a technology mapping methodology for the assessment of the technological capabilities and the technology status in an industry and its application for technology mapping in the sector of dwelling construction for lower -income households in urban Tanzania and Costa Rica. PhD thesis, Delft University of Technology, Netherlands.

olde Scholtenhuis, L L; Dorée, A G and Hartmann, T (2011) Challenges for construction it adoption on project level. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

ter Huurne, R and Coenen, T (2024) Exploring the barriers of ground penetrating radar adoption: A technological innovation system analysis. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

ter Huurne, R B A; Olde Scholtenhuis, L L; Dorée, A G and van Oers, B (2024) Using formative interventions to study emerging technologies in construction practices: the case of the Ground Penetrating Radar. Construction Management and Economics, 42(11-12), pp. 943-962. ISSN 01446193

van Egmond-deWilde de Ligny, E and Erkelens, P (2008) Construction technology diffusion in developing countries: Limitations of prevailing innovation systems. Journal of Construction in Developing Countries, 13(2), pp. 43-63. ISSN 1823-6499

Álvares, J S; Costa, D B and Melo, R R S (2018) Exploratory study of using unmanned aerial system imagery for construction site 3D mapping. Construction Innovation, 18(3), pp. 301-320. ISSN 1471-4175