Items with Subject: health safety and environment

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abanda, F H and Tah, J H M (2008) Towards developing a sustainable building technology ontology. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Abankwa, Derek Asante (2021) What drives technology adaptation in construction firms? An investigation of the antecedents, adaptive behaviours, and outcomes. PhD thesis, University of Hong Kong, Hong Kong.

Abbasi, M H (2024) Phasing out fossil fuel heating in UK homes: A multi-dimensional framework for sustainability assessment of alternatives and their lifecycle implications. PhD thesis, Liverpool John Moores University, UK.

Abdel Aziz, A M (2021) The practice of roadway safety management in public-private partnerships. Journal of Construction Engineering and Management, 147(12): 04021173, ISSN 0733-9364

Abdel-Salam, A N (2018) Corporate social responsibility of construction and real estate development companies in developing countries: An assessment model. PhD thesis, Purdue University, USA.

Abdelaal, A; Ma, J; Zhang, H; Shobeiri, V and Xie, Y M (2026) Bio-stabilized modular rammed earth blocks for sustainable and aesthetic construction. Construction Innovation, 26(9), pp. 1-20. ISSN 1471-4175

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO₂ emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelhamid, T S (1999) Measuring and evaluating physiological demands of construction work. PhD thesis, University of Michigan, USA.

Abdelkhalek, S; Zayed, T and Eltoukhy, A E E (2025) Multifaceted optimization for bridge inspection process. Journal of Construction Engineering and Management, 151(5): 04025034, ISSN 0733-9364

Abdelshafy, A and Walther, G (2023) Using dynamic-locational material flow analysis to model the development of urban stock. Building Research & Information, 51(1), pp. 5-20. ISSN 0961-3218

Abdul Rahman, N.; Belayutham, S. and Che Ibrahim, C. K. I. (2026) Socio-technical dynamics of barriers to sustainable railway projects in Malaysia. Built Environment Project and Asset Management, 16(3), pp. 637-654. ISSN 2044-124X

Abdul-Aziz, A R (2012) Control mechanisms exercised in Malaysian housing public-private partnerships. Construction Management and Economics, 30(1), pp. 37-55. ISSN 1466433X

Abdul-Rashid, I; Bassioni, H and Bawazeer, F (2007) Factors affecting safety performance in large construction contractors in Egypt. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

AbdulLateef, O; Sanmargaraja, S; Oni, O; Anavhe, P and Mewomo, C M (2024) An association rule mining model for the application of construction technologies during COVID-19. International Journal of Construction Management, 24(4), pp. 443-453. ISSN 1562-3599

Abdulhadi, M A M E (2012) IT adoption in the construction sector in Libya. PhD thesis, University of Glamorgan, UK.

Abdullah, A-N M (2019) Assessing economic, social, political and environmental issues related to mega-projects : A case study of Merowe Dam in Sudan. PhD thesis, University of Plymouth, UK.

Abedmousa, M (2023) Reframing construction labour productivity in a colonisation context: the West Bank as an example. PhD thesis, University of Westminster, UK.

Abidin, N Z; Yusof, N and Othman, A A E (2013) Enablers and challenges of a sustainable housing industry in Malaysia. Construction Innovation, 13(1), pp. 10-25. ISSN 1471-4175

Abiodun, I (2012) The role of public private partnership in highway infrastructure development and sustainability in Nigeria. PhD thesis, University of Salford, UK.

Aboagye-Nimo, E; Painting, N and Piroozfar, P (2024) Picking up where we left off: A 'temporary' safety culture. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Aboagye-Nimo, E; Raidén, A B; King, A and Tietze, Z (2013) A safety culture shaped by common sense. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Aboagye-Nimo, E; Raidén, A B and Tietze, S (2011) Investigating good health and safety practices in small construction firms in the United Kingdom. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Aboagye-Nimo, E; Raidén, A B; Tietze, S and King, A (2012) The use of experience and situated knowledge in ensuring safety among workers of small construction firms. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Aboshia, A M A; Rahmat, R A; Zain, M F M and Ismail, A (2017) Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. International Journal of Building Pathology and Adaptation, 35(5), pp. 438-455.

AbouMoemen, A A (2022) A BIM maturity-KPI assessment framework for a UK public sector local authority client. PhD thesis, University of Salford, UK.

Abrahams, G (2017) Revealing and exploring the insider/outsider role of the building control officer in England. Architectural Engineering and Design Management, 13(4), pp. 278-290. ISSN 1745-2007

Abrahams, G (2017) Constructing definitions of sustainable development. Smart and Sustainable Built Environment, 6(1), pp. 34-47. ISSN 2046-6099

Abrishami, S; Goulding, J and Rahimian, F (2021) Generative BIM workspace for AEC conceptual design automation: Prototype development. Engineering, Construction and Architectural Management, 28(2), pp. 482-509. ISSN 0969-9988

Abudayyeh, O Y (1991) An automated data acquisition and data storage model for improving cost and schedule control. PhD thesis, North Carolina State University, USA.

Abuwarda, Z; Mostafa, K; Morita, P and Hegazy, T (2024) Optimizing construction work-rest schedules and worker reassignment utilizing wristband physiological data. Journal of Construction Engineering and Management, 150(11): 04024149, ISSN 0733-9364

Abuzeinab, A (2015) Implementing green business models in the UK construction industry: opportunities and challenges. PhD thesis, University of Salford, UK.

Abuzeinab, A; Arif, M; Qadri, M A and Kulonda, D (2018) Green business models in the construction sector: An analysis of outcomes and benefits. Construction Innovation, 18(1), pp. 20-42. ISSN 1471-4175

Acar, E; Wall, J; McNamee, F; Carney, M and Öney-Yazici, E (2008) Innovative safety management training through e-learning. Architectural Engineering and Design Management, 4(3-4), pp. 239-250. ISSN 1745-2007

Acheamfour, V K; Kissi, E and Adjei-Kumi, T (2019) Ascertaining the impact of contractors pre-qualification criteria on project success criteria. Engineering, Construction and Architectural Management, 26(4), pp. 618-632. ISSN 0969-9988

Acheampong, A; Adjei, E K; Adade-Boateng, A O; Kissi, E; Manu, P and Atibila, D W (2025) Exploring the multidimensional challenges in integrating design for safety (dfs) in the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(5), pp. 1483-1500. ISSN 1726-0531

Acheampong, A; Adjei, E K; Asiedu, R O; Atibila, D W and Abu, I M A (2025) Evaluating the factors influencing artificial intelligence technology uptake in health and safety management within the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 2060-2081. ISSN 1726-0531

Acheampong, A; Adjei, E K; Adade-Boateng, A; Acheamfour, V K; Afful, A E and Boateng, E (2025) Impact of construction workers informal safety communication (CWISC) on safety performance on construction sites. Engineering, Construction and Architectural Management, 32(7), pp. 4338-4356. ISSN 0969-9988

Adabre, M A; Chan, A P C and Edwards, D J (2023) Modeling relationship between success factors (policies) and critical success criteria (goals) for sustainable housing in developing countries. International Journal of Construction Management, 23(10), pp. 1642-1652. ISSN 1562-3599

Adade-Boateng, A O; Fugar, F and Adinyira, E (2021) Framework to improve the attitudes of construction workers towards safety helmets. Journal of Construction in Developing Countries, 26(2), pp. 65-86. ISSN 1823-6499

Adamu, I I; Okanlawon, T T; Oyewobi, L O; Shittu, A A and Jimoh, R A (2026) Revolutionising construction safety: Benefits of harnessing artificial intelligence tools for dynamic monitoring of safety compliance on construction projects in Nigeria. International Journal of Building Pathology and Adaptation, 44(1), pp. 241-265. ISSN 2398-4708

Adebowale, O J (2018) A multi-stakeholder approach to productivity improvement in the South African construction industry. PhD thesis, Nelson Mandela University, South Africa.

Adebowale, O J and Agumba, J N (2024) A systematic review of challenges undermining the efficacy of construction health and safety regulations in major African countries. Construction Economics and Building, 24(4-5), pp. 1-24. ISSN 2204-9029

Adebowale, O J and Agumba, J N (2024) Applications of augmented reality for construction productivity improvement: A systematic review. Smart and Sustainable Built Environment, 13(3), pp. 479-495. ISSN 2046-6099

Adebowale, O J; Simpeh, F; Kukoyi, P O and Agumba, J N (2022) Assessment of basic measures instituted to curtail the spread of COVID-19 on construction sites in Lagos, Nigeria. Journal of Construction in Developing Countries, 27(2), pp. 43-61. ISSN 1823-6499

Adedayo, O; Michieletto, M; Bamidele, E and Ntigulirwa, M (2020) Application of hybrid green fences for security in public building designs in Nigeria: Lessons from Kigali, Rwanda and Abuja, Nigeria. Journal of Construction in Developing Countries, 25(1), pp. 147-162. ISSN 1823-6499

Adedigba, A A (2022) Towards integrated sustainable solid waste management in Nigerian cities. PhD thesis, Northumbria University, UK.

Adegoriola, M I; Yung, E H K; Lai, J H K; Chan, E H W and Yevu, S K (2023) Understanding the influencing factors of heritage building maintenance management: Findings from developed and developing regions. Building Research & Information, 51(5), pp. 605-624. ISSN 0961-3218

Adeniyi, O (2017) Capability maturity model for assessing flood resilience capabilities of the built environment. PhD thesis, University of Northumbria, UK.

Adesanya, A; Misra, S; Maskeliunas, R and Damasevicius, R (2021) Prospects of ocean-based renewable energy for West africa's sustainable energy future. Smart and Sustainable Built Environment, 10(1), pp. 37-50. ISSN 2046-6099

Adetunji, I; Price, A; Fleming, P and Kemp, P (2003) The application of systems thinking to the concept of sustainability. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Adetunji, I O (2006) Sustainable construction: a web-based performance assessment tool. EngD thesis, Loughborough University, UK.

Adinyira, E; Agyekum, K; Baiden, B K; Ebohon, O J and Ampratwum, G (2020) Regeneration of Sub-Saharan africa's open market places: A case for guileless stakeholder participation. Construction Economics and Building, 20(2), pp. 165-180. ISSN 2204-9029

Adjei, S; Ankrah, N; Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Adjei, S D (2016) Review of waste management in the UK construction industry. PhD thesis, University of Wolverhampton, UK.

Adjei, S D; Ankrah, N A; Adukpo, S E; Ndekugri, I and Searle, D (2024) Factors influencing the extent of waste management on construction sites. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Adjei, S D; Ankrah, N A; Ndekugri, I and Searle, D (2018) Sustainable construction and demolition waste management: Comparison of corporate and project level drivers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Adnan, N. A.; Ramali, F. N.; Yahya, N.; Amin, N. D. M.; Sabil, A.; Mohd Siraj, S. and Ismail, N. (2025) Preservation strategies for historic timber mosques: Structural integrity assessment on masjid jamek an nur, Batu Pahat, Johor. Journal of Construction in Developing Countries, 30(2), pp. 343-361. ISSN 1823-6499

Adoko, M T (2016) Developing a cost overrun predictive model for complex systems development projects. PhD thesis, George Washington University, USA.

Adzivor, E K; Emuze, F and Das, D K (2023) Indicators for safety culture in SME construction firms: A Delphi study in Ghana. Journal of Financial Management of Property and Construction, 28(3), pp. 293-316. ISSN 1366-4387

Afolabi, A O; Tunji-Olayeni, P F; Oyeyipo, O O and Ojelabi, R A (2017) The socio-economics of women inclusion in green construction. Construction Economics and Building, 17(1), pp. 70-89. ISSN 2204-9029

Aftab, U; Hassan, M U; Ullah, F; Nasir, A R and Thaheem, M J (2026) BIM-based search and selection of construction material suppliers: A dedicated framework and prototype. Construction Innovation, 26(3), pp. 892-915. ISSN 1471-4175

Afuye, O O; Oladimeji, O; Aina, O O; Tam, V W Y and Haddad, A N (2025) Factors influencing safety behaviours of construction tradesmen. International Journal of Construction Management, 25(4), pp. 375-384. ISSN 1562-3599

Afxentiadis, D E (2010) Interpreting a major event organization's efforts to reliably manage information security risks: the case of the Athens 2004 Olympics. PhD thesis, London School of Economics and Political Science, UK.

Afzal, Fatima (2019) A framework to improve sustainability performance of construction organisations. PhD thesis, University of New South Wales, Australia.

Agapiou, A (2020) Factors influencing the selection of a procurement route for UK off-site housebuilding. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(1), pp. 3-15. ISSN 17514304

Agbesi, K; Fugar, F D and Adjei-Kumi, T (2018) Modelling the adoption of sustainable procurement in construction organisations. Built Environment Project and Asset Management, 8(5), pp. 461-476. ISSN 2044-124X

Agbesi, K; Kissi, E and Adjei-Kumi, T (2020) Implementation of sustainable procurement practices in public sector construction organisation in Ghana. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Agdas, D (2008) Corporate-level management system for critical strategic resources for large construction program managers. PhD thesis, University of Florida, USA.

Agha, R H M and Hussein, A N (2024) Adaptation re-use of traditional cafés in Erbil, Iraq. International Journal of Building Pathology and Adaptation, 42(1), pp. 153-174. ISSN 23984708

Aghimien, D O; Aigbavboa, C O; Oke, A E and Thwala, W D (2020) Mapping out research focus for robotics and automation research in construction-related studies: A bibliometric approach. Journal of Engineering, Design and Technology, 18(5), pp. 1063-1079. ISSN 1726-0531

Agri, M. E.; Le, A. and Phung, Q. (2026) AI integration in architectural design and management: Professionals' perspectives. Architectural Engineering and Design Management, 22(1), pp. 67-82. ISSN 1745-2007

Agu, C A (2020) Exploring the standards american executive leaders need to develop successful infrastructure projects in sub-saharan Africa. DM thesis, Colorado Technical University, USA.

Aguado, A; Caño, A D; De La Cruz, M P; Gómez, D and Josa, A (2012) Sustainability assessment of concrete structures within the Spanish structural concrete code. Journal of Construction Engineering and Management, 138(2), pp. 268-276. ISSN 0733-9364

Agumba, J N (2013) A construction health and safety performance improvement model for South African small and medium enterprises. PhD thesis, University of Johannesburg, South Africa.

Agumba, J N and Haupt, T C (2014) The implementation of health and safety practices: Do demographic attributes matter? Journal of Engineering, Design and Technology, 12(4), pp. 530-550.

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2022) Stair step geometry compliance with standard specifications for safety and usability: A study of selected university buildings in Ghana. International Journal of Building Pathology and Adaptation, 40(1), pp. 20-39. ISSN 23984708

Agyekum, K; Hammond, S F; Acheampong, A O and Gasue, R (2025) On the limited damp-proofing of residential buildings: Do social norms matter? International Journal of Building Pathology and Adaptation, 43(7), pp. 1840-1862. ISSN 2398-4708

Agyekum, K; Botchway, S Y; Adinyira, E and Opoku, A (2022) Environmental performance indicators for assessing sustainability of projects in the Ghanaian construction industry. Smart and Sustainable Built Environment, 11(4), pp. 918-950. ISSN 2046-6099

Agyekum, K; Ghansah, F A; Tetteh, P A and Amudjie, J (2021) The role of project managers (pms) in construction health and safety implementation in Ghana. Journal of Engineering, Design and Technology, 19(1), pp. 245-262. ISSN 1726-0531

Agyekum-Mensah, G and Knight, A D (2017) The professionals' perspective on the causes of project delay in the construction industry. Engineering, Construction and Architectural Management, 24(5), pp. 828-841. ISSN 0969-9988

Ahern, E (2022) A framework for improving the process of building certification to enhance energy efficiency: the case of Ireland. DProf thesis, Anglia Ruskin University, UK.

Ahmad, R K and Gibb, A G F (2003) Measuring safety culture with SPMT: Field-data. Journal of Construction Research, 4(1), pp. 29-44. ISSN 1609-9451

Ahmad, R K; Gibb, A G F and McCaffer, R (1998) Methodology to develop an effective safety performance measurement technique (spmt). In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Ahmad, T; Aibinu, A A and Stephan, A (2017) Green building projects: Process innovation leading to project innovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ahmad-Latiffi, A (2012) Performance measurement for construction businesses. PhD thesis, Loughborough University, UK.

Ahmadi, M; Ahmadi, A and Yousefi, S (2025) Human behavior and decision-making in earthquake emergencies: Insights from virtual reality and serious games. International Journal of Construction Management, 25(11), pp. 1254-1272. ISSN 1562-3599

Ahmed, A; Mohammed, H A; Gambatese, J and Hurwitz, D (2021) Effects of flashing blue lights mounted on paving equipment on vehicle speed behavior in work zones. Journal of Construction Engineering and Management, 147(9): 04021101, ISSN 0733-9364

Ahmed, I and Charlesworth, E R (2015) An evaluation framework for assessing resilience of post-disaster housing. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 300-312. ISSN 1759-5916

Ahmed, I and Kabir, M H (2021) Building codes and regulations for disaster resilience in Bangladesh: The case of Dhaka. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 540-554. ISSN 1759-5916

Ahmed, M E K and Girgs, I R N (2023) A comparative study on achieving universally designed schools. Two case studies at aswan city, Egypt. International Journal of Construction Management, 23(12), pp. 2102-2115. ISSN 1562-3599

Ahmed, S M; Yaris, C; Farooqui, R U and Saqib, M (2014) Key attributes and skills for curriculum improvement for undergraduate construction management programs. International Journal of Construction Education and Research, 10(4), pp. 240-254. ISSN 1557-8771

Ahmed, W; Najmi, A; Arif, M and Younus, M (2019) Exploring firm performance by institutional pressures driven green supply chain management practices. Smart and Sustainable Built Environment, 8(5), pp. 415-437. ISSN 2046-6099

Ahmed Ezzat Othman, A and Sirbadhoo, N (2009) An innovative partnership framework for sustainable development of rural areas in South Africa: The role of project management firms. Journal of Engineering, Design and Technology, 7(3), pp. 243-263. ISSN 1726-0531

Ahn, S; Lee, S and Steel, R P (2014) Construction workers' perceptions and attitudes toward social norms as predictors of their absence behavior. Journal of Construction Engineering and Management, 140(5): 04013069, ISSN 0733-9364

Aidane, A (2021) Applying an equity lens to project stakeholder engagement: How organizations are embedding equitable stakeholder engagement in their project management processes. PhD thesis, Canterbury Christ Church University, UK.

Aidoo, I; Fugar, F; Adinyira, E and Ansah, N B (2023) Assessing the level of resilience in construction safety management systems in the Ghanaian construction industry. Journal of Construction in Developing Countries, 28(2), pp. 217-242. ISSN 1823-6499

Aigbavboa, C; Addo, L Y; Ebekozien, A; Thwala, W D and Arthur-Aidoo, B M (2023) Developing a framework for effective institutional management of Ghana's urban water supply. International Journal of Building Pathology and Adaptation, 41(6), pp. 290-302. ISSN 23984708

Aigbavboa, C and Thwala, W (2014) An assessment of critical success factors for the reduction of the cost of poor quality from construction projects in South Africa. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Aiyetan, O A and Dillip, D (2018) System dynamics approach to mitigating skilled labour shortages in the construction industry: A South Africa context. Construction Economics and Building, 18(4), pp. 45-63. ISSN 2204-9029

Ajayi, S O; Lister, N; Dauda, J A; Oyegoke, A and Alaka, H (2024) Influencing sub-contracted operatives' attitudes and behaviours towards improved health and safety culture in construction. Engineering, Construction and Architectural Management, 31(6), pp. 2286-2305. ISSN 0969-9988

Ajayi, S O; Oyebiyi, F and Alaka, H A (2023) Facilitating compliance with BIM ISO 19650 naming convention through automation. Journal of Engineering, Design and Technology, 21(1), pp. 108-129. ISSN 1726-0531

Ajibike, W A; Adeleke, A Q; Mohamad, F; Bamgbade, J A and Moshood, T D (2023) The impacts of social responsibility on the environmental sustainability performance of the Malaysian construction industry. International Journal of Construction Management, 23(5), pp. 780-789. ISSN 1562-3599

Ajslev, J Z N; Wåhlin-Jacobsen, C D; Brandt, M; Møller, J L and Andersen, L L (2020) Losing face from engagement: an overlooked risk in the implementation of participatory organisational health and safety initiatives in the construction industry. Construction Management and Economics, 38(9), pp. 824-839. ISSN 01446193

Aka, A; Iji, J; Isa, R B and Bamgbade, A A (2021) Assessing the relationships between underlying strategies for effective building information modeling (BIM) implementation in Nigeria construction industry. Architectural Engineering and Design Management, 17(5-6), pp. 434-446. ISSN 1745-2007

Akadiri, O P (2011) Development of a multi-criteria approach for the selection of sustainable materials for building projects. PhD thesis, University of Wolverhampton, UK.

Akadiri, P O and Fadiya, O O (2013) Empirical analysis of the determinants of environmentally sustainable practices in the UK construction industry. Construction Innovation, 13(4), pp. 352-373. ISSN 1471-4175

Akande, O K (2015) Factors influencing operational energy performance and refurbishment of UK listed church buildings: towards a strategic management framework. PhD thesis, Anglia Ruskin University, UK.

Akbar, M R (2012) Evaluating sustainability in high-rise developments. PhD thesis, Ulster University, UK.

Akeremale, I D (2022) Supply chain management in prefabricated housing construction in Nigeria. PhD thesis, University of Newcastle, Australia.

Akinade, O O (2017) BIM-based software for construction waste analytics using artificial intelligence hybrid models. PhD thesis, University of the West of England, Bristol, UK.

Akindele, M A (2024) Development and evaluation of portable reduced-complexity air quality models for policy assessment in Africa. PhD thesis, Carnegie Mellon University, USA.

Akinlolu, M; Haupt, T C; Edwards, D J and Simpeh, F (2022) A bibliometric review of the status and emerging research trends in construction safety management technologies. International Journal of Construction Management, 22(14), pp. 2699-2711. ISSN 1562-3599

Akinlolu Temisola, M; Oladimeji Benedict, O and Haupt, T C (2021) A scientometric review and meta-analysis of the health and safety of women in construction: Structure and research trends. Journal of Engineering, Design and Technology, 19(2), pp. 446-466. ISSN 1726-0531

Akinnola, P (2021) Improving project performance on construction projects through stakeholder management-an action research inquiry. PhD thesis, University of Liverpool, UK.

Akintola, A; Root, D and Venkatachalam, S (2017) Key constraints to optimal and widespread implementation of BIM in the South African construction industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Akintola, B F; Jagboro, G O; Ojo, G K and Odediran, S J (2020) Effectiveness of mechanisms for enforcement of ethical standards in the construction industry. Journal of Construction Business and Management, 4(1), pp. 1-12. ISSN 2521-0165

Akmam Syed Zakaria, S; Gajendran, T; Rose, T and Brewer, G (2018) Contextual, structural and behavioural factors influencing the adoption of industrialised building systems: A review. Architectural Engineering and Design Management, 14(1-2), pp. 3-26. ISSN 1745-2007

Akmam Syed Zakaria, S; Gajendran, T; Skitmore, M and Brewer, G (2018) Key factors influencing the decision to adopt industrialised building systems technology in the Malaysian construction industry: An inter-project perspective. Architectural Engineering and Design Management, 14(1-2), pp. 27-45. ISSN 1745-2007

Akotia, J and Awuzie, B (2025) Evaluating social sustainability factor prioritisation in sustainable urban regeneration projects: The case of UK construction industry. Construction Economics and Building, 25(1), pp. 4-24. ISSN 2204-9029

Akotia, J and Sackey, E (2018) Towards the delivery of sustainable regeneration projects' types in the UK: An exploration of the role and level of involvement of key practitioners. International Journal of Construction Management, 18(5), pp. 375-384. ISSN 1562-3599

Aksorn, T and Hadikusumo, B H W (2007) Gap analysis approach for construction safety program improvement. Journal of Construction in Developing Countries, 12(1), pp. 77-97. ISSN 1823-6499

Aksorn, T and Hadikusumo, B H W (2008) Measuring effectiveness of safety programmes in the Thai construction industry. Construction Management and Economics, 26(4), pp. 409-421. ISSN 1466433X

Aktas, C B (2011) Impact of product lifetime on life cycle assessment results. PhD thesis, University of Pittsburgh, USA.

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al Hosni, I S; Amoudi, O and Callaghan, N (2020) An exploratory study on challenges of circular economy in the built environment in Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(3), pp. 104-113. ISSN 17514304

Al Jayyousi, A (2021) A critical examination of the relationship between project manager leadership style and project success in the United Arab Emirates construction industry. PhD thesis, California Southern University, USA.

Al-Ameen, H A (2012) Antitrust: the person-centred approach. PhD thesis, Swansea University, UK.

Al-Bayati, A J and Chellappa, V (2025) Identifying desirable safety actions of upper management to foster higher levels of construction safety culture. Journal of Construction Engineering and Management, 151(7): 04025077, ISSN 0733-9364

Al-Fahad, J Y (2012) Reform of building codes, regulations, administration and enforcement in Kuwait: within the legal, administrative, technical & social framework. PhD thesis, Loughborough University, UK.

Al-Gahtani, K; Alsulaihi, I; Ali, M and Marzouk, M (2017) Production of green concrete using recycled waste aggregate and byproducts. Built Environment Project and Asset Management, 7(4), pp. 413-425. ISSN 2044-124X

Al-Hamadani, S; Egbelakin, T; Sher, W and von Meding, J K (2021) Drivers of applying ecological modernization to construction waste minimization in New South Wales construction industry. Construction Economics and Building, 21(3), pp. 80-104. ISSN 2204-9029

Al-Hashimy, H. N. H.; Yao, J.; Pitchay, A. A. and Hussein, W. N. (2026) Linking computerised accounting information systems to innovation, resilience and performance in construction projects. Engineering, Construction and Architectural Management, pp. 1-21. ISSN 0969-9988

Al-Homoud, M S; Abdou, A A and Khan, M M (2004) Safety design practices in residential buildings in Saudi Arabia. Building Research & Information, 32(6), pp. 538-543. ISSN 0961-3218

Al-Homoud, M S and Khan, M M (2004) Assessing safety measures in residential buildings in Saudi Arabia. Building Research & Information, 32(4), pp. 300-305. ISSN 0961-3218

Al-Kayed, A. A.; Rotimi, F. E.; Purushothaman, M. B.; Pawley, M. and Ghaffarian Hoseini, A. (2026) Modelling the enablers of effective digital technology implementation for competitiveness enhancement among subcontracting organisations in new zealand's residential construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 894-919. ISSN 1726-0531

Al-Khiami, M I; Lindhard, S M and Wandahl, S (2025) Paradox in practice: Work-related musculoskeletal disorder prevalence and reporting among construction workers in Kuwait and Denmark. Journal of Construction Engineering and Management, 151(7): 04025078, ISSN 0733-9364

Al-Maiyah, S; Brett Martinson, D and Elkadi, H (2024) Evaluation of the indoor environment in a historic museum during the COVID-19 lockdown in Northwest England. Building Research & Information, 52(7), pp. 748-764. ISSN 0961-3218

Al-Mhdawi, M K S (2022) Risk management of construction projects under extreme conditions: a case study of Iraq. PhD thesis, University of Southampton, UK.

Al-Mhdawi, M K S; Brito, M; Onggo, B S; Qazi, A and O'Connor, A (2024) COVID-19 emerging risk assessment for the construction industry of developing countries: Evidence from Iraq. International Journal of Construction Management, 24(7), pp. 693-706. ISSN 1562-3599

Al-Nammari, F and Alhanbali, F (2025) Housing adaptations for COVID-19 lockdowns in Amman and policy implications. Building Research & Information, 53(5), pp. 600-619. ISSN 0961-3218

Al-Otaibi, S (2010) A framework for improving the performance of standard design models in the Saudi Ministry of Interior projects. PhD thesis, Loughborough University, UK.

Al-Remal, A M (2013) Risk-based design of structures for fire. PhD thesis, University of Edinburgh, UK.

Al-Saqer, K M (2001) An investigation into the development processes and project management practices of government construction projects in Saudi Arabia. PhD thesis, University of Birmingham, UK.

Al-Shehri, Y (2015) Relationship between personality trait and multi-national construction workers safety performance in Saudi Arabia. PhD thesis, Loughborough University, UK.

Al-Sinan, M A (2004) TQM and the construction industry: Saudi Arabia: a case study. PhD thesis, City, University of London, UK.

Al-Yami, A M and Price, A D F (2005) Exploring conceptual linkages between value engineering and sustainable construction. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Al-Yami, A M H (2008) An integrated approach to value management and sustainable construction during strategic briefing in Saudi construction projects. PhD thesis, Loughborough University, UK.

AlKheder, S; AlKandari, D and AlYatama, S (2022) Sustainable assessment criteria for airport runway material selection: A fuzzy analytical hierarchy approach. Engineering, Construction and Architectural Management, 29(8), pp. 3091-3113. ISSN 0969-9988

AlShemeili, H; Davidson, R and Khalid, K (2024) Impact of empowering leadership on safety behavior and safety climate: Mediating and moderating role of safety monitoring. Journal of Engineering, Design and Technology, 22(4), pp. 1282-1305. ISSN 1726-0531

Alam, Sadaf (2024) Development of the framework and the methodologies towards nzebs in Finland. PhD thesis, Aalto University, Finland.

Alam, Shafiqul (2016) Developing life cycle environmental indicators for road infrastructure. PhD thesis, Queensland University of Technology, Australia.

Alamri, R (2019) Development of a model for health and safety management in Saudi Arabian oil and gas construction projects. PhD thesis, University of Wolverhampton, UK.

Alankarage, S; Chileshe, N; Samaraweera, A; Rameezdeen, R and Edwards, D J (2022) Organisational culture in building information modelling maturity research: A bibliometric analysis. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Alasmari, H; Chrisp, M T and Bowles, G (2012) A framework for enhancing and improving the safety culture on Saudi construction sites. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Alavi, P; Sobouti, H and Shahbazi, M (2024) Adaptive re-use of industrial heritage and its role in achieving local sustainability. International Journal of Building Pathology and Adaptation, 42(6), pp. 1223-1249. ISSN 2398-4708

Albeiro Alberto Aguilar, O and Saúl Tomás Salas, S (2021) Good practices of labor welfare and environmental protection in potato crops in Colombia: A way to contribute to the sustainable development of colombian agriculture. Smart and Sustainable Built Environment, 10(1), pp. 51-66. ISSN 2046-6099

Albert, A; Hallowell, M R and Kleiner, B M (2014) Experimental field testing of a real-time construction hazard identification and transmission technique. Construction Management and Economics, 32(10), pp. 1000-1016. ISSN 01446193

Albouwarthan, M A (2020) Prolonged heat exposure and health outcomes among construction workers in Saudi Arabia. DSc thesis, University of Massachusetts Lowell, USA.

Alencastro, J; Fuertes, A and de Wilde, P (2024) Investigating the influence of quality management on building thermal performance. Engineering, Construction and Architectural Management, 31(8), pp. 3356-3376. ISSN 0969-9988

Alhajeri, M (2011) Health and safety in the construction industry: challenges and solutions in the UAE. PhD thesis, Coventry University, UK.

Alharbi, R (2024) An appraisal of the early impact of COVID-19 on affordable housing finance in Saudi Arabia's Vision 2030. International Journal of Building Pathology and Adaptation, 42(4), pp. 751-767. ISSN 23984708

Alharmoodi, S (2017) The effect of stakeholder integration on open innovation in construction projects. PhD thesis, British University in Dubai, UAE.

Alhawamdeh, M (2020) An interpretivist approach for the development of a behavioural framework to support the adoption of waste minimisation behaviour of contractors: the case study of Jordan. PhD thesis, University of Salford, UK.

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Ali, A H; Kineber, A F; Elyamany, A; Ibrahim, A H and Daoud, A O (2025) Application of Ginni's mean analysis for identifying the stationary driver enhancing modular construction adoption in the building industry. International Journal of Construction Management, 25(3), pp. 322-333. ISSN 1562-3599

Ali, G M; Olearczyk, J; Bouferguene, A and Al-Hussein, M (2021) Implementation of combined loading to calculate ground bearing pressure under crawler crane tracks. Journal of Construction Engineering and Management, 147(7): 04021051, ISSN 0733-9364

Ali, K N (2004) Towards an online knowledge management system for reactive maintenance projects. PhD thesis, University of Salford, UK.

Ali, Tauha H (2006) Influence of national culture on construction safety climate in Pakistan. PhD thesis, Griffith University, Pakistan.

Aliasgari, R; Fan, C; Li, X; Golabchi, A and Hamzeh, F (2024) MOCAP and ai-based automated physical demand analysis for workplace safety. Journal of Construction Engineering and Management, 150(7): 04024060, ISSN 0733-9364

Alidrisi, Hassan (2018) Systems thinking and construction safety: Leadership competencies and behaviours. PhD thesis, Griffith University, Saudi Arabia.

Aliyu, A A (2014) Product stewardship as a novel sustainability pathway for the UK precast concrete industry. PhD thesis, Loughborough University, UK.

Alkasisbeh, M R (2018) An integrated decision support framework for life-cycle building asset management. PhD thesis, Western Michigan University, USA.

Alkhadim, M (2019) Risk management: the effect of perceived safety on users behaviour in crowded large space buildings. PhD thesis, University of Brighton, UK.

Alkhaldi, M (2019) Impact of human errors on accidents in the oil and gas industry in Bahrain. PhD thesis, University of Salford, UK.

Alkhard, A (2016) Analysis of influencing factors on safety culture in the construction industry of Saudi Arabia. PhD thesis, University of Florida, USA.

Alkhard, A (2024) Leveraging digital asset management and meta-data integration for enhanced asset management. Construction Economics and Building, 24(3), pp. 76-94. ISSN 2204-9029

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Alkilani, S and Loosemore, M (2022) Project performance measurement for small-and-medium sized construction contractors in the Jordanian construction industry. Construction Management and Economics, 40(10), pp. 743-769. ISSN 01446193

Alkilani, S Z; Jupp, J and Sawhney, A (2013) Issues of construction health and safety in developing countries: A case of Jordan. Construction Economics and Building, 13(3), pp. 141-156. ISSN 2204-9029

Allan, C; Sommerville, J; Kennedy, P and Robertson, H (2000) A business unit approach to construction process re-engineering. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Allan, P and Bryant, M (2014) The attributes of resilience: A tool in the evaluation and design of earthquake-prone cities. International Journal of Disaster Resilience in the Built Environment, 5(2), pp. 109-129. ISSN 1759-5916

Alleman, D and Lee, E B (2020) Mitigating the legal challenges of imposing disincentives on nonperforming transportation projects. Engineering, Construction and Architectural Management, 27(10), pp. 2859-2891. ISSN 0969-9988

Allen, D; Hartley, R; Whitehead, P; Smith, M; Dickinson, I and Gorse, C (2010) The potential for using interactive scenarios in the teaching and learning of health and safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Alloh, B O (2014) The application of planning law for environmental protection and improvement in Nigeria. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Allport, R J (2008) Improving decision-making for major urban rail projects. PhD thesis, Imperial College London, UK.

Allport, R J (2011) Improving decision-making for major urban rail projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(2), pp. 61-70. ISSN 17514312

Almahmoud, Essam (2014) Social sustainability health check: A model for evaluating and optimising social value creation in construction projects. PhD thesis, University of Melbourne, Australia.

Almalki, T S (2015) A study of the influence of trust on the relationships between team members in engineering projects. PhD thesis, University of Dundee, UK.

Almatared, M M S (2024) An integrated digital twin framework and evacuation simulation system for enhanced safety in smart buildings. PhD thesis, Western Michigan University, USA.

Almazrouei, M; Khalid, K; Abdallah, S and Davidson, R (2020) Assessing the health, safety, and environment culture in the United Arab Emirates oil and gas industry. Journal of Engineering, Design and Technology, 18(2), pp. 495-512.

Almazrouei, M; Khalid, K and Davidson, R (2021) Safety climate of UAE petroleum industry: a cross-validation using confirmatory factor analytic approach. Journal of Engineering, Design and Technology, 19(4), pp. 943-965. ISSN 1726-0531

Almutairi, M (2019) The influence of national culture on health and safety performance in Kuwait oil and gas sector construction projects. PhD thesis, University of Salford, UK.

Almén, L and Larsson, T J (2014) Health and safety coordinators in building projects. Built Environment Project and Asset Management, 4(3), pp. 251-263. ISSN 2044-124X

Alnoaimi, Ali D (2021) Development of sustainability assessment framework for sewerage infrastructure projects in the Kingdom of Bahrain. PhD thesis, Griffith University, Australia.

Alnsour, J A M (2006) Planning and managing the built environment in the context of compliance with residential standards in Jordan. PhD thesis, University of Huddersfield, UK.

Alnsour, M A M (2020) Integrating sustainability assessment into public works development in Jordan. PhD thesis, University of Leeds, UK.

Alotaibi, A (2019) A framework for implementing social responsibility in mega-projects in Saudi Arabia. PhD thesis, Loughborough University, UK.

Alqahtani, F (2017) The relationship between the values of Abu-Dhabi Police and the competencies of their project managers. PhD thesis, University of Wolverhampton, UK.

Alqershy, M T; Shi, Q and Anbar, D R (2025) Analysing the interplay of isomorphic pressures, perceived benefits and top management support on social responsibility performance of Belt and Road megaprojects. Engineering, Construction and Architectural Management, 32(6), pp. 4074-4099. ISSN 0969-9988

Alqubaisi, S (2019) Developing a framework to assess the portfolio governance, risk and compliance of Abu Dhabi Government entities in the UAE. PhD thesis, Aston University, UK.

Alrajehi, S H (2014) Importance of KPI identification and implementation in Kuwaiti construction industry. PhD thesis, Brunel University, UK.

Alrashidi, M (2021) Multiple perspective of public-private partnership project success: the case of Kuwaiti public housing initiative. PhD thesis, University of Salford, UK.

Alrehaili, Omar (2016) Assessing safety culture among personnel in governmental construction sites at Saudi Arabia: A quantitative study approach. PhD thesis, University of Central Florida, USA.

Alroomi, A S (2013) Integrative framework for sustainable development of the cost estimating profession. PhD thesis, Oklahoma State University, USA.

Alruqi, W M (2019) Predicting construction safety performance. PhD thesis, University of Colorado at Boulder, USA.

Alruqi, W M and Hallowell, M R (2019) Critical success factors for construction safety: Review and meta-analysis of safety leading indicators. Journal of Construction Engineering and Management, 145(3): 04019005, ISSN 0733-9364

Alsamarraie, M. M. and Mohd Ghazali, F. E. (2026) A novel framework for sustainable contracting process in organisational public procurement. International Journal of Construction Management, 26(8), pp. 1653-1668. ISSN 1562-3599

Alsamarraie, M M; Yousif, O S and Ghazali, F E M (2025) Procurement integrity: Best practices for PPP projects in Iraq and Malaysia. Construction Economics and Building, 25(3-4), pp. 289-310. ISSN 2204-9029

Alshamsi, O S (2019) Multiple criteria decision making for supplier selection and cross-cultural considerations: Case study of the United Kingdom / United Arab Emirates construction industry. PhD thesis, University of Exeter, UK.

Alsharef, A F A (2022) Leveraging data analytics to improve construction operations and occupational safety. PhD thesis, North Carolina State University, USA.

Alshboul, O. and Shehadeh, A. (2026) Enhancing infrastructure project outcomes through optimized contractual structures and long-term warranties. Engineering, Construction and Architectural Management, 33(3), pp. 2220-2242. ISSN 0969-9988

Alshdiefat, A S; Sharif, A A; Alharahsheh, A I; Albrka, S I; Olsson, N O E; Younes, M and Bang, S (2025) Construction and demolition waste management in Jordan: A multifaceted perspective. Construction Innovation, 25(2), pp. 290-305. ISSN 1471-4175

Alsheikh-Salem, Y M-B (2022) The development of a sustainability risk assessment model for construction projects: A case study on the Jordanian construction industry. PhD thesis, University of Salford, UK.

Alsherfawi Aljazaerly, A; Okyere, S A; Mensah, S L; Abunyewah, M; Frimpong, L K and Kita, M (2026) Towards a socially sustainable built environment: A comparative assessment of urban neighbourhoods in Istanbul. Smart and Sustainable Built Environment, 15(1), pp. 343-363. ISSN 2046-6099

Alshihre, F (2018) Development of a framework for client satisfaction in the Saudi construction industry. PhD thesis, University of Wolverhampton, UK.

Alsulami, Badr T (2012) Incorporating complexity and uncertainty into appraising sustainability of civil infrastructure systems: Hybrid fuzzy modelling approach. PhD thesis, Griffith University, Australia.

Alsulami, H; Serbaya, S H; Rizwan, A; Saleem, M; Maleh, Y and Alamgir, Z (2023) Impact of emotional intelligence on the stress and safety of construction workers' in Saudi Arabia. Engineering, Construction and Architectural Management, 30(4), pp. 1365-1378. ISSN 0969-9988

Altawil, Shadi N A (2017) Multi-level knowledge extraction and modeling to support job hazard analysis process for oil and gas pipeline projects. PhD thesis, University of Alberta, Canada.

Althaqafi, Torky (2015) Using stakeholder theory to explain the development and operation of safety culture and systems to improve safety performance in the construction industry in Saudi Arabia. PhD thesis, University of Adelaide, Australia.

Alzahrani, Sami Salem (2015) Developing a project management maturity model to initiate sustainable project performance and modernisation in the Kingdom of Saudi Arabia. PhD thesis, University of Adelaide, Australia.

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Alzoubi, Y; Locatelli, G and Sainati, T (2024) Turning a blind eye: Ignoring modern slavery in the race to construction project completion. Journal of Construction Engineering and Management, 150(10): 04024136, ISSN 0733-9364

Amakali, T R; Cook, G and Larsen, G D (2012) Striving for inclusive design in the built environment: Learning strategy adopted by policy implementers at local authorities in England. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Amany, A; Taghizade, K and Noorzai, E (2020) Investigating conflicts of expert contractors using the last planner system in building information modeling process. Journal of Engineering, Design and Technology, 18(6), pp. 1381-1402. ISSN 1726-0531

Amarachukwu Nnadozie, N and Wilkinson, S (2021) Building code amendment and building resilience: Perspective of building code users in New Zealand. Built Environment Project and Asset Management, 11(4), pp. 643-659. ISSN 2044-124X

Amarah, Burhan (2016) Development of a triple bottom line stakeholder satisfaction model. PhD thesis, Bond University, Australia.

Amarasinghe, I A and Hadiwattege, C (2022) Enablers for facilitating life cycle assessment: Key stakeholder perspectives of Sri Lankan construction industry. Built Environment Project and Asset Management, 12(4), pp. 590-612. ISSN 2044-124X

Amaratunga, D; Malalgoda, C I and Keraminiyage, K (2018) Contextualising mainstreaming of disaster resilience concepts in the construction process. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 348-367. ISSN 1759-5916

Ameh, H and Lamond, J (2025) Public preference of flood-resilient housing technologies in Nigeria: A case study of Kogi State. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 87-103. ISSN 1759-5908

Amiri, Mojtaba and Saghatforoush, Ehsan (2026) From exploration to prioritization: Advancing BIM-IOT integration for construction health and safety improvement. Journal of Construction Business and Management, 8(S1), pp. 125-139. ISSN 2521-0165

Amorim, Aldo Siervo de (2016) Critical analysis of the economic and environmental feasibility of the civil construction waste recycling process at the municipal level. PhD thesis, Universidade de São Paulo, Brazil.

Amponsah, I (2008) Emerging civil infrastructure and environmental sustainability: Life-cycle assessment and multiobjective optimization. PhD thesis, University of South Carolina, USA.

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

An, T and Watanabe, T (2011) Towards the sustainable improvement in construction labour's employment in China: Cultivating subcontractor's role. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Ancell, D (2005) Reducing costs: A practical application of performance-based specification and transaction cost theories. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Andersen, L P; Karlsen, I L; Kines, P; Joensson, T and Nielsen, K J (2015) Social identity in the construction industry: Implications for safety perception and behaviour. Construction Management and Economics, 33(8), pp. 640-652. ISSN 01446193

Andersen, L P; Nørdam, L; Joensson, T; Kines, P and Nielsen, K J (2018) Social identity, safety climate and self-reported accidents among construction workers. Construction Management and Economics, 36(1), pp. 22-31. ISSN 01446193

Anderson, J (2013) Health and safety -the language of UK law. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(1), pp. 6-11. ISSN 17514304

Andersson, R and Buser, M (2020) On the road to nowhere? The challenges of aligning construction and demolition waste practices with circular economy. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Andreasen, M H; Agergaard, J; Kofie, R Y; Møller-Jensen, L and Oteng-Ababio, M (2022) Urban encroachment in ecologically sensitive areas: Drivers, impediments and consequences. Buildings & Cities, 3(1), pp. 920-938. ISSN 2632-6655

Andrew, A; Murning, I; Pitt, M and Tucker, M (2008) Investment in the Scottish further education estate 19992006. Journal of Financial Management of Property and Construction, 13(3), pp. 209-216. ISSN 1366-4387

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Anjomshoa, E (2025) The application of building information modeling (BIM) system in the smartification of green and sustainable buildings. Engineering, Construction and Architectural Management, 32(8), pp. 5194-5227. ISSN 0969-9988

Ankrah, N A (2007) An investigation into the impact of culture on construction project performance. PhD thesis, University of Wolverhampton, UK.

Ankrah, N A; Proverbs, D and Debrah, Y (2009) Factors influencing the culture of a construction project organisation: An empirical investigation. Engineering, Construction and Architectural Management, 16(1), pp. 26-47. ISSN 0969-9988

Ankrah, N A; Proverbs, D G and Ahadzie, D K (2008) Exploring the behaviours of construction project participants through social cognitive theory. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Anosike, N M; Enenmoh, C R; Nkeleme, E and Mosaku, T O (2016) Comparative analysis of contributions of building and quantity surveying professions towards the development of sustainable construction industry in Nigeria. African Journal of Built Environment Research, 1(1), pp. 1-14. ISSN 2414-0236

Antonini, E; Boeri, A and Giglio, F (2022) Classification criteria and markers for biomimetic building envelope within circular economy principles: A critical review. Architectural Engineering and Design Management, 18(4), pp. 387-409. ISSN 1745-2007

Antwi Afari, E. N.; Acquah, I. S. K.; Issau, K. and Arko-Folson, G. (2026) Modelling the nexus between sustainable project management and project success: Evidence from Ghana. Journal of Engineering, Design and Technology, 24(5), pp. 1279-1297. ISSN 1726-0531

Anvuur, A M; Kumaraswamy, M and Fellows, R (2012) Perceptions of status and TMO workgroup cooperation: Implications for project governance. Construction Management and Economics, 30(9), pp. 719-737. ISSN 1466433X

Anvuur, A M and Kumaraswamy, M M (2016) Effects of teamwork climate on cooperation in crossfunctional temporary multi-organization workgroups. Journal of Construction Engineering and Management, 142(1): 04015054, ISSN 0733-9364

Anwer, S; Li, H; Antwi-Afari, M F; Mirza, A M; Rahman, M A; Mehmood, I; Guo, R and Wong, A Y L (2024) Evaluation of data processing and artifact removal approaches used for physiological signals captured using wearable sensing devices during construction tasks. Journal of Construction Engineering and Management, 150(1): 03123008, ISSN 0733-9364

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W and Wong, A Y L (2021) Evaluation of physiological metrics as real-time measurement of physical fatigue in construction workers: State-of-the-art review. Journal of Construction Engineering and Management, 147(5): 03121001, ISSN 0733-9364

Anzagira, L F; Duah, D; Badu, E; Simpeh, E K and Marful, A B (2024) Stimulation strategies to promote green building uptake in developing countries: The case of Ghana. Journal of Engineering, Design and Technology, 22(3), pp. 1012-1029. ISSN 1726-0531

Appau, M W; Attakora-Amaniampong, E and Quansah, J Y D (2025) Residential student housing mobility and supportive design: A cross-sectional assessment of off-campus all-inclusive university student hostels in Ghana. Journal of Engineering, Design and Technology, 23(6), pp. 1856-1874. ISSN 1726-0531

Apu, N and Das, U (2020) Tectonics and earthquake potential of Bangladesh: A review. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 295-307. ISSN 1759-5916

Aramali, V; Gibson, G E; El Asmar, M and Sanboskani, H (2023) Novel earned value management system maturity framework and its relation to project performance. Journal of Construction Engineering and Management, 149(6): 04023031, ISSN 0733-9364

Arashpour, M; Wakefield, R; Abbasi, B; Arashpour, M and Hosseini, R (2018) Optimal process integration architectures in off-site construction: Theorizing the use of multi-skilled resources. Architectural Engineering and Design Management, 14(1-2), pp. 46-59. ISSN 1745-2007

Ardeshiri, A; Vij, A and Arthur, N (2026) Attracting young women to construction careers: A preference study to inform workforce strategies. Construction Management and Economics, 44(3), pp. 214-239. ISSN 0144-6193

Arewa, A and Farrell, P (2012) A review of compliance with health and safety regulations and economic performance in small and medium construction enterprises. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Arewa, A O (2014) An empirical analysis of commitment to health and safety and its effect on the profitability of UK Construction SMEs. PhD thesis, University of Bolton, UK.

Arif, M; Bendi, D; Toma-Sabbagh, T and Sutrisna, M (2012) Construction waste management in India: An exploratory study. Construction Innovation, 12(2), pp. 133-155. ISSN 1471-4175

Arkani, S (1999) Contractual interfaces: the implications of building production process management and interorganisational relations for productivity in building project coalitions. PhD thesis, University of Greenwich, UK.

Arora, R (1997) Role and influence of emerging social dynamics in decisions on investment opportunities in construction industry. PhD thesis, Indian Institute of Technology Delhi, India.

Arshad, H; Qasim, M; Thaheem, M J and Gabriel, H F (2017) Quantification of material wastage in construction industry of Pakistan: An analytical relationship between building types and waste generation. Journal of Construction in Developing Countries, 22(2), pp. 19-34. ISSN 1823-6499

Artis, S (2007) The effects of perceived organizational support on training and safety in Latino and non-Latino construction workers. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Asaad, A and El-Sayegh, S M (2021) Key criteria for selecting green suppliers for construction projects in the UAE. Journal of Financial Management of Property and Construction, 26(2), pp. 201-218. ISSN 1366-4387

Asad, M M; Hassan, R B; Sherwani, F; Aamir, M; Soomro, Q M and Sohu, S (2019) Design and development of a novel knowledge-based decision support system for industrial safety management at drilling process: HAZFO Expert 1.0. Journal of Engineering, Design and Technology, 17(4), pp. 705-718. ISSN 1726-0531

Asad, M M; Hassan, R B; Sherwani, F; Abbas, Z; Shahbaz, M S and Soomro, Q M (2019) Identification of effective safety risk mitigating factors for well control drilling operation: An explanatory research approach. Journal of Engineering, Design and Technology, 17(1), pp. 218-229. ISSN 1726-0531

Asad, M M; Hassan, R B; Sherwani, F; Rind, I A and Maiji, Y (2020) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation: A proposed framework. Journal of Engineering, Design and Technology, 18(5), pp. 959-971. ISSN 1726-0531

Asah-Kissiedu, M (2019) Development of an integrated safety, health and environmental management capability maturity model for Ghanaian construction companies. PhD thesis, University of the West of England, Bristol, UK.

Asah-Kissiedu, M; Manu, P; Booth, C A; Mahamadu, A M and Agyekum, K (2023) Integrated safety, health and environmental management in the construction industry: Key organisational capability attributes. Journal of Engineering, Design and Technology, 21(6), pp. 1975-2007. ISSN 1726-0531

Asare, E; Owusu-Manu, D G; Ayarkwa, J; Martek, I and Edwards, D J (2026) Empirical perspective of working capital management practices among large building construction firms in Ghana. Construction Innovation, 26(3), pp. 768-785. ISSN 1471-4175

Asare, S O; Fobiri, G and Bondinuba, F K (2025) Enhancing fairness, transparency and accountability during tendering under Ghana's procurement system: A systematic review. Built Environment Project and Asset Management, 15(1), pp. 33-50. ISSN 2044-124X

Ashcroft, D; Egbelakin, T; Jing, J and Rasheed, E O (2019) Cost comparison of seismic damage resisting systems for modules in multi-storey buildings. Journal of Engineering, Design and Technology, 17(2), pp. 330-346. ISSN 1726-0531

Ashdown, M M A; Crawley, J; Biddulph, P; Wingfield, J; Lowe, R and Elwell, C A (2020) Characterising the airtightness of dwellings: Its improvement over time and relationship to construction technique. International Journal of Building Pathology and Adaptation, 38(1), pp. 89-106. ISSN 23984708

Ashraf, H; Ali, A; Sunindijo, R Y; Maqsoom, A; Memon, S A and Hassan, M U (2023) Workers' relational identification with supervisors influences safety behaviour in construction projects. Engineering, Construction and Architectural Management, 30(10), pp. 5030-5051. ISSN 0969-9988

Ashraf, H; Ejaz, M K; Memon, S A; Shen, Y; Maqsoom, A and Sunindijo, R Y (2025) Examining a two-step working model of safety knowledge in translating safety climate into safety behavior. Engineering, Construction and Architectural Management, 32(1), pp. 282-304. ISSN 0969-9988

Asiedu, R. O.; Amoakwa, A. B.; Ameyaw, C.; Owusu-Manu, D. G.; Daniels, P. A. and Gyimah, S. (2026) Environmental, social, and governance considerations in sustainable construction project delivery. Construction Economics and Building, 26(2), ISSN 2204-9029

Asiedu, R O; Manu, P; Mahamadu, A M; Booth, C A; Olomolaiye, P; Agyekum, K and Abadi, M (2023) Critical skills for infrastructure procurement: Insights from developing country contexts. Journal of Engineering, Design and Technology, 21(6), pp. 1948-1974. ISSN 1726-0531

Asigri, E O; Afram, S O and Ameyaw, C (2021) Fire safety design attributes of students' housing facilities in KNUST Ghana. African Journal of Built Environment Research, 5(1), pp. 41-58. ISSN 2414-0236

Askarizad, R; Dadashpour, A; Faghirnavaz, J; He, J and Safari, H (2023) Organizing worn-out neighborhoods with the new-urbanism approach using mixed methods in rudsar, Northern Iran. Smart and Sustainable Built Environment, 12(1), pp. 128-155. ISSN 2046-6099

Assaad, R and El-Adaway, I H (2021) Determining critical combinations of safety fatality causes using spectral clustering and computational data mining algorithms. Journal of Construction Engineering and Management, 147(5): 04021035, ISSN 0733-9364

Atalah, A (2008) Effect of rock trenching vibrations on nearby structures. Journal of Construction Engineering and Management, 134(4), pp. 234-241. ISSN 0733-9364

Ateloye, A; Bowles, G and Oyegoke, A (2016) Private sector participation in Nigeria higher education infrastructure development. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Ateş, M and Erinsel Önder, D (2023) A local smart city approach in the context of smart environment and urban resilience. International Journal of Disaster Resilience in the Built Environment, 14(3), pp. 266-284. ISSN 1759-5916

Athapaththu, K I and Karunasena, G (2018) Framework for sustainable construction practices in Sri Lanka. Built Environment Project and Asset Management, 8(1), pp. 51-63. ISSN 2044-124X

Atkinson, E; Spillane, J; Bradley, J and Brooks, T (2022) Challenges in the adoption of mobile information communication technology (m-ICT) in the construction phase of infrastructure projects in the UK. International Journal of Building Pathology and Adaptation, 40(3), pp. 327-344. ISSN 23984708

Atkinson, G (2008) Sustainability, the capital approach and the built environment. Building Research & Information, 36(3), pp. 241-247. ISSN 0961-3218

Atmo, G and Duffield, C (2014) Improving investment sustainability for PPP power projects in emerging economies: Value for money framework. Built Environment Project and Asset Management, 4(4), pp. 335-351. ISSN 2044-124X

Atta, A; Ali, N; Taman, M and Etman, E (2018) Improvement the structural behavior of recycled RC elements using CdO nanoparticles. Construction Innovation, 18(2), pp. 134-151. ISSN 1471-4175

Attah, Tobenna Vincent (2025) GPA as a predictor of safety practices among U.S. College construction interns. PhD thesis, University of Arizona Global Campus, USA.

Aunwong, P and Hadikusumo, B H W (2025) Digital 2D and 3D modelling for construction safety management in Thai construction projects. International Journal of Construction Management, 25(15), pp. 1778-1790. ISSN 1562-3599

Awale, Raman (2016) An exploratory study of a 'creating shared value' (CSV) concept for achieving firm competitiveness in Hong Kong construction firms. PhD thesis, University of Hong Kong, Hong Kong.

Ayda Montaser, K and Heidari, S (2021) Optimizing window size by integrating energy and lighting analyses considering occupants' visual satisfaction. Built Environment Project and Asset Management, 11(4), pp. 673-686. ISSN 2044-124X

Aye, L; Bamford, N; Charters, B and Robinson, J (1999) Environmentally sustainable development: A life cycle costing approach for a commercial office building in Melbourne, Australia. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Aye, L; Bamford, N; Charters, B and Robinson, J (2000) Environmentally sustainable development: A life-cycle costing approach for a commercial office building in Melbourne, Australia. Construction Management and Economics, 18(8), pp. 927-934. ISSN 01446193

Aye, L; Charters, W W S; Chiazor, M A and Robinson, J R W (2004) Indoor environment quality and sustainable development for commercial buildings in Australia. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Ayinla, K (2021) Development of a semantic knowledge modelling approach for evaluating offsite manufacturing production processes. PhD thesis, Birmingham City University, UK.

Ayodele, T T (2022) Cost-effective retrofit packages for low-middle income residential buildings in Nigeria. PhD thesis, De Montfort University, UK.

Azcarate Aguerre, J F (2023) Facades-as-a-service: A cross-disciplinary model for the (re)development of circular building envelopes. PhD thesis, Delft University of Technology, Netherlands.

Azeem, S; Naeem, M A; Waheed, A and Thaheem, M J (2017) Examining barriers and measures to promote the adoption of green building practices in Pakistan. Smart and Sustainable Built Environment, 6(3), pp. 86-100. ISSN 2046-6099

Azhar, S and Choudhry, R M (2016) Capacity building in construction health and safety research, education, and practice in Pakistan. Built Environment Project and Asset Management, 6(1), pp. 92-105. ISSN 2044-124X

Azimzadeh, F (2000) COSTEFF model: A computer-based knowledge source for improving cost effectiveness of engineering and construction projects. DEng thesis, Lamar University - Beaumont, USA.

Aziz, Z; Alzaabi, E and Syazli Fathi, M (2023) Prioritisation of resilience criteria and performance indicators for road emergencies crisis response: An analytic hierarchy process (AHP) approach. Journal of Financial Management of Property and Construction, 28(2), pp. 178-205. ISSN 1366-4387

Azizibabani, M (2026) Investigating the interactions of the components affecting the social performance of open spaces in affordable housing projects. International Journal of Construction Management, 26(5), pp. 735-750. ISSN 1562-3599

Azmat, Y (2020) Influence of human factors on the safety performance in Saudi Arabian construction industry. PhD thesis, University of Salford, UK.

Baah, B; Acheampong, A; Osei-Asibey, D and Afful, A E (2023) Assessing the role of respectable engagement in improving construction employee's safety perception. Smart and Sustainable Built Environment, 12(5), pp. 937-962. ISSN 2046-6099

Babalola, A; Cheung, C M; Yunusa-Kaltungo, A; Manu, P and Bartolo, P (2024) A conceptual framework and tools characteristics for developing an immersive technology-based occupational health training mechanism. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Babalola, A; Manu, P; Cheung, C; Yunusa-Kaltungo, A; Bartolo, P; Gao, S and Perera, S (2022) Applications of immersive technologies for occupational safety and health management in the construction industry: A systematic review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Babangida, I; Olubodun, F and Kangwa, J (2012) Building refurbishment: Holistic evaluation of barriers and opportunities. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Babar, S; Thaheem, M J and Ayub, B (2017) Estimated cost at completion: Integrating risk into earned value management. Journal of Construction Engineering and Management, 143(3): 04016104, ISSN 0733-9364

Babatunde, S O; Ekundayo, D; Udeaja, C and Abubakar, U O (2022) An investigation into the sustainability practices in PPP infrastructure projects: A case of Nigeria. Smart and Sustainable Built Environment, 11(1), pp. 110-125. ISSN 2046-6099

Baborska-Narożny, M and Stevenson, F (2019) Service controls interfaces in housing: Usability and engagement tool development. Building Research & Information, 47(3), pp. 290-304. ISSN 0961-3218

Babrauskas, V; Lucas, D; Eisenberg, D; Singla, V; Dedeo, M and Blum, A (2012) Flame retardants in building insulation: A case for re-evaluating building codes. Building Research & Information, 40(6), pp. 738-755. ISSN 0961-3218

Bachman, L R (2013) New professionalism: The post-industrial context. Building Research & Information, 41(6), pp. 752-760. ISSN 0961-3218

Bacon, M (2014) Occupancy analytics: A new basis for low-energy-low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(1-2), pp. 146-163. ISSN 1745-2007

Badi, S (2017) Public sustainable-energy requirements and innovation in UK PFI school projects. Construction Management and Economics, 35(4), pp. 218-238. ISSN 01446193

Baharuddin, H E A; Ibrahim, C K I C; Costello, S B and Wilkinson, S (2017) Managing stakeholders through alliances: A case study of a megaproject in New Zealand. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(4), pp. 151-160. ISSN 17514304

Baharudin, M R; Nasruddin, H N; Rahman, A A; Mahadi, M R and Noor, S B M (2018) Numerical model for individual time calculation for evacuation among secondary students. International Journal of Building Pathology and Adaptation, 36(5), pp. 450-470. ISSN 23984708

Bahrami, S and Zeinali, D (2023) The sustainability challenge of product information quality in the design and construction of facades: Lessons from the grenfell tower fire. Smart and Sustainable Built Environment, 12(3), pp. 488-506. ISSN 2046-6099

Bai, L; Shi, H; Kang, S and Zhang, B (2023) Project portfolio risk analysis with the consideration of project interdependencies. Engineering, Construction and Architectural Management, 30(2), pp. 647-670. ISSN 0969-9988

Bai, Y (2007) Intelligent painting process planner for robotic bridge painting. Journal of Construction Engineering and Management, 133(4), pp. 335-342. ISSN 0733-9364

Bai, Y and Burkett, W R (2006) Rapid bridge replacement: Processes, techniques, and needs for improvements. Journal of Construction Engineering and Management, 132(11), pp. 1139-1147. ISSN 0733-9364

Bai, Y; Burkett, W R and Nash, P T (2006) Lessons learned from an emergency bridge replacement project. Journal of Construction Engineering and Management, 132(4), pp. 338-344. ISSN 0733-9364

Bai, Y; Kim, S H and Burkett, W R (2007) Enhancing the capability of rapid bridge replacement after extreme events. Engineering, Construction and Architectural Management, 14(4), pp. 375-386. ISSN 0969-9988

Bailey, M; Booth, C A; Horry, R; Vidalakis, C; Mahamadu, A M and Awuah, K G B (2020) Opinions of small and medium UK construction companies on environmental management systems. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 174(1), pp. 23-34. ISSN 17514304

Bajjou, M S and Chafi, A (2026) Enhancing environmental sustainability through lean construction principles: An industry-based SEM analysis. Engineering, Construction and Architectural Management, 33(1), pp. 171-206. ISSN 0969-9988

Bakar, F A; Cheung, C M; Kaltungo, A Y; Mohandes, S R and Lou, E (2024) Key organisational attributes for developing a maturity model: Adopting immersive technologies in construction safety training. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Baker, A J (2019) 'Suitable and sufficient'? UK regulation of post-construction fire safety. PhD thesis, University of Edinburgh, UK.

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Balgheeth, Y (2016) Enhancing existing health and safety processes in public sector construction projects within Saudi Arabia using building information modelling approaches. PhD thesis, University of Salford, UK.

Ball, R (1999) Developers, regeneration and sustainability issues in the reuse of vacant industrial buildings. Building Research & Information, 27(3), pp. 140-148. ISSN 0961-3218

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Bamgbade, J A; Fung, E S; Moshood, T D; Kamaruddeen, A M and Liew, S (2023) The dynamics of ecological sustainability in housing delivery: Developers' perspectives. Architectural Engineering and Design Management, 19(2), pp. 183-199. ISSN 1745-2007

Bansal, S; Choudhary, L; Kalra, M; Dave, N and Sharma, A K (2025) Mechanical and microstructural characteristics of structural concrete containing rca treated with sodium metasilicate. Journal of Engineering, Design and Technology, 23(3), pp. 854-870. ISSN 1726-0531

Banyte, J (2020) A framework development to facilitate the effective management of a sustainable commercial property market. PhD thesis, Liverpool John Moores University, UK.

Bapat, H; Sarkar, D and Gujar, R (2021) Selection of sustainable materials for energy savings of infrastructure-transportation project in ahmedabad, India using BIM and FCM. Journal of Construction in Developing Countries, 26(2), pp. 135-161. ISSN 1823-6499

Barnes, L R and Croker, N (2013) The relevance of the ISO 26000 social responsibility issues to the Hong Kong construction industry. Construction Economics and Building, 13(3), pp. 37-50. ISSN 2204-9029

Barrett, P S; Sexton, M G and Green, L (1999) Integrated delivery systems for sustainable construction. Building Research & Information, 27(6), pp. 397-404. ISSN 0961-3218

Barry, S; Cronin, W; Spillane, J P and Bradley, J G (2021) Compliance with COVID-19 regulations in micro-enterprises and SMEs in the Irish construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Barthel, P-A (2016) Morocco in the era of eco-urbanism: Building a critical and operational research on an emerging practice in Africa. Smart and Sustainable Built Environment, 5(3), pp. 272-288. ISSN 2046-6099

Bartlett, H V (2006) Understanding the implementation of sustainability principles in UK educational building projects. PhD thesis, University of Cambridge, UK.

Bashir, A M (2013) A framework for utilising lean construction strategies to promote safety on construction sites. PhD thesis, University of Wolverhampton, UK.

Bashir, A M; Suresh, S; Proverbs, D and Gameson, R (2011) A critical, theoretical, review of the impacts of lean construction tools in reducing accidents on construction sites. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Batarseh, Shadi (2024) Digital twin for digital asset management: Asset information model characteristics and digital capabilities for smart functions, sydney metro case study. PhD thesis, University of New South Wales, Australia.

Bateman, G L (2021) A holistic model of emergency evacuations in large, complex, public occupancy buildings. PhD thesis, Imperial College London, UK.

Batista, L T; Franco, J R Q; Fakury, R H; Porto, M F; Alves, L V R and Kohlmann, G S (2024) BIM-IoT-FM integration: strategy for implementation of sustainable water management in buildings. Smart and Sustainable Built Environment, 13(5), pp. 1096-1116. ISSN 2046-6099

Bauer, E and Menches, C L (2011) Why we need renaissance engineers: Golden Gate bridge seismic retrofit Phase II case study. Journal of Construction Engineering and Management, 137(10), pp. 901-905. ISSN 0733-9364

Bazen, E (2014) Effect of the Building Act 2011 on compliance costs in Western Australia. Construction Economics and Building, 14(2), pp. 41-56. ISSN 2204-9029

Beach, T; Yeung, J; Ghoroghi, A and Rezgui, Y (2025) Moving automated compliance checking to the operational phase of the building life-cycle: analysis and feasibility study in the UK. International Journal of Construction Management, 25(7), pp. 840-849. ISSN 1562-3599

Beavers, J E; Moore, J R and Schriver, W R (2009) Steel erection fatalities in the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 227-234. ISSN 0733-9364

Bechem, E E (2023) A human touch to public-private partnerships for sustainable infrastructure development in the central African sub-region. PhD thesis, University of Manchester, UK.

Becker, P E (2000) Modeling construction worker chemical exposures for compliance with OSHA permissible exposure limits: An investigation of lead exposures to highway bridge maintenance workers. DSc thesis, University of Massachusetts Lowell, USA.

Becker, T H (2016) The effect of leader communication style on the safety climate in the construction industry. PhD thesis, Capella University, USA.

Beheiry, S M A; Chong, W K and Haas, C T (2006) Examining the business impact of owner commitment to sustainability. Journal of Construction Engineering and Management, 132(4), pp. 384-392. ISSN 0733-9364

Behm, M (2012) Safe design suggestions for vegetated roofs. Journal of Construction Engineering and Management, 138(8), pp. 999-1003. ISSN 0733-9364

Behm, M and Choon Hock, P (2012) Safe design of skyrise greenery in Singapore. Smart and Sustainable Built Environment, 1(2), pp. 186-205. ISSN 2046-6099

Belayutham, S and Ibrahim, C K I C (2019) Barriers and strategies for better safety practices: The case of construction SMEs in Malaysia. Construction Economics and Building, 19(1), pp. 20-39. ISSN 2204-9029

Bell, M R (2019) Home is where the heart(ache) is: Building a regulatory regime for residential construction which more effectively meets community expectations for occupant health and safety. PhD thesis, King's College London, UK.

Bellamy, L (2019) Optimisation tools to assist efficient and sustainable tall building design. PhD thesis, Imperial College London, UK.

Bello, A. O. (2026) Towards achieving circular economy in the Nigerian construction industry: Policymakers perspectives and conceptual framework development. Smart and Sustainable Built Environment, 15(3), pp. 1391-1411. ISSN 2046-6099

Bello, A O; Abdulraheem, A A; Afolabi, O P; Aka, A and Gbenga, P O (2024) Assessing the underlying factors affecting trust and transparency in the construction industry: A mixed method approach. Construction Economics and Building, 24(1-2), pp. 3-28. ISSN 2204-9029

Bello, A O; Isa, R B; Afolabi, O P; Arogundade, S and Khan, A A (2025) Drivers for the implementation of circular economy in the Nigerian aeco industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(3), pp. 953-972. ISSN 1726-0531

Bello, W (2018) Project performance diagnostics: A model for assessing construction project performance in Nigeria. PhD thesis, University of Salford, UK.

Bello, W A (2017) Project performance diagnostics: a model for assessing construction project performance in Nigeria. PhD thesis, University of Salford, UK.

Belusko, M; Timothy, M and Leary, O (2010) Cost analyses of measures to improve residential energy ratings to 6 stars: Playford North development, South Australia. Construction Economics and Building, 10(1-2), pp. 36-47. ISSN 2204-9029

Bendak, S and Alhammadi, A A (2019) A multi-criteria decision-making approach to minimising fire risk in detached house designs. Journal of Engineering, Design and Technology, 17(6), pp. 1146-1160. ISSN 1726-0531

Bentivegna, V; Curwell, S; Deakin, M; Lombardi, P; Mitchell, G and Nijkamp, P (2002) A vision and methodology for integrated sustainable urban development: Bequest. Building Research & Information, 30(2), pp. 83-94. ISSN 0961-3218

Bertolin, C and Berto, F (2024) Sustainable management of heritage buildings in long-term perspective (symbol): Current knowledge and further research needs. International Journal of Building Pathology and Adaptation, 42(1), pp. 1-17. ISSN 23984708

Besenyöi, Z (2022) Towards a BIM-supported facility management knowledge management system for energy efficient building operations by rule-based code compliance checking. PhD thesis, Technische Universitaet Berlin, Germany.

Besklubova, S; Kravchenko, E; Kasprzhitskii, A; Lazorenko, G and Zhong, R Y (2026) Establishing a market for carbon-neutral technology in concrete waste recycling by sequestering flue co 2: An evolutionary game theory-based case study in Hong Kong. Journal of Construction Engineering and Management, 152(4): 04026017, ISSN 0733-9364

Besser, D (2006) The experience of women in construction management: A hermeneutic phenomenological study. PhD thesis, University of Minnesota, USA.

Best, R and Purdey, B (2012) Assessing occupant comfort in an iconic sustainable education building. Construction Economics and Building, 12(3), pp. 55-65. ISSN 2204-9029

Beurskens, Pieter Robert (2021) The development of an evaluation method to support circular building design. PhD thesis, University of Twente, Netherlands.

Bevan, E A M and Yung, P (2015) Implementation of corporate social responsibility in Australian construction SMEs. Engineering, Construction and Architectural Management, 22(3), pp. 295-311. ISSN 0969-9988

Beynon, K S (2005) Dispute resolution and access to justice, with particular reference to the construction industry in the United Kingdom. PhD thesis, Swansea University, UK.

Bhagat, G and Jha, K N (2023) Stage-wise evaluation of integrity risks in public works procurement in India. International Journal of Construction Management, 23(16), pp. 2818-2829. ISSN 1562-3599

Bhandari, S; Hallowell, M R; Alruqi, W and Salas, R (2021) Modeling the relationship between personal risk tolerance, work-related risk tolerance, and risk-taking behavior of construction workers. Journal of Construction Engineering and Management, 147(4), ISSN 0733-9364

Bhattacharjee, K; Bugalia, N and Mahalingam, A (2025) Differences in pathways to resilient safety culture for construction projects of different sizes. Journal of Construction Engineering and Management, 151(5): 04025026, ISSN 0733-9364

Bhattacharya, K.; Sarkar, D. and Solanki, A. (2026) Evaluation of road safety factors in Indian urban cities using CFPR and fuzzy DEMATEL. International Journal of Construction Management, 26(10), pp. 2058-2084. ISSN 1562-3599

Bhavya Swathi, I; Suvarna Raju, L and Ramulu, P J (2020) Surface development by reinforcing nano-composites during friction stir processing: A review. Journal of Engineering, Design and Technology, 18(3), pp. 653-687. ISSN 1726-0531

Bhutto, K; Griffith, A and Stephenson, P (2004) Integration of quality, health and safety and environment management systems in contractor organisations. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Bhutto, K H (2004) The application of integrated management systems by contracting organisations. PhD thesis, Sheffield Hallam University, UK.

Bhutto, Khalid Hussain (2004) The application of integrated management systems (IMS) by contracting organisations. PhD thesis, Sheffield Hallam University, UK.

Bichard, E (2009) The application of sustainable behaviour change strategies in three built environment companies. Journal of Engineering, Design and Technology, 7(1), pp. 7-20. ISSN 1726-0531

Biggs, H C; Dingsdag, D P; Sheahan, V L and Stenson, N J (2005) The role of collaboration in defining and maintaining a safety culture: Australian perspectives in the construction sector. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Bina, K and Moghadas, N (2021) BIM-abm simulation for emergency evacuation from conference hall, considering gender segregation and architectural design. Architectural Engineering and Design Management, 17(5-6), pp. 361-375. ISSN 1745-2007

Birkeland, J L (2014) Positive development and assessment. Smart and Sustainable Built Environment, 3(1), pp. 4-22. ISSN 2046-6099

Birnie, J W (1993) A behavioural study using decision analysis of building cost prediction by chartered quantity surveyors. PhD thesis, Ulster University, UK.

Biscaya, S V N (2012) Coordination and management of information for construction design projects: a framework for Portugal. PhD thesis, University of Salford, UK.

Bishop, D (1994) The professionals' view of the Health and Safety Commission's draft Construction (Design and Management) Regulations. Construction Management and Economics, 12(4), pp. 365-372. ISSN 01446193

Blamah, N V; Magidimisha-Chipungu, H; Dayomi, M and Popoola, A A (2023) Intrinsic mode choice determinants based on a descriptive analysis of the perceptions of Abuja commuters: Towards refocusing the societal mind-set on environmentally sustainable modes choice. Smart and Sustainable Built Environment, 12(1), pp. 1-26. ISSN 2046-6099

Blismas, N; Pasquire, C and Gibb, A (2006) Benefit evaluation for off-site production in construction. Construction Management and Economics, 24(2), pp. 121-130. ISSN 01446193

Boadu, E. F.; Wang, C. C. and Sunindijo, R. Y. (2021) Challenges for occupational health and safety enforcement in the construction industry in Ghana. Construction Economics and Building, 21(1), pp. 1-21. ISSN 2204-9029

Boadu, E F; Sunindijo, R Y; Wang, C C and Frimpong, S (2023) Factors constraining the promotion of health and safety in public works procurement in developing countries. International Journal of Construction Management, 23(9), pp. 1611-1621. ISSN 1562-3599

Boadu, E F; Sunindijo, R Y; Wang, C C and Frimpong, S Y (2022) Health and safety integration into the procurement stages of public construction projects in developing countries: A case of Ghana. Construction Economics and Building, 22(3), pp. 43-64. ISSN 2204-9029

Boadu, Elijah Frimpong (2022) A framework for promoting health and safety through procurement in the construction industry in developing countries: A case of Ghana. PhD thesis, University of New South Wales, Australia.

Boateng, R. K.; Booth, C. A.; Horry, R. E.; Wiejak-Roy, G. A.; Agyekum, K.; Al-Tarazi, D.; Joseph, R.; Manu, P. and Prabhakaran, A. (2025) Implementing environmental management systems (ISO 14001) in the construction sector of Ghana. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(4), pp. 244-254. ISSN 1751-4304

Boateng, E B (2021) The role of human safety interventions on co-workers’ safety outcomes in construction projects. PhD thesis, University of Newcastle, Australia.

Bon, R and Hutchinson, K (2000) Sustainable construction: Some economic challenges. Building Research & Information, 28(5-6), pp. 310-314. ISSN 0961-3218

Bondinuba, F K; Blay, A V K and Jin, R (2026) Project managers' sociocultural traits driving Sustainable Development Goals in the construction industry. Construction Economics and Building, 26(1), ISSN 2204-9029

Bong, S; Rameezdeen, R; Zuo, J; Li, R Y M and Ye, G (2015) The designer's role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia. International Journal of Construction Management, 15(4), pp. 276-287. ISSN 1562-3599

Bordalo, R; De Brito, J; Gaspar, P L and Silva, A (2011) Service life prediction modelling of adhesive ceramic tiling systems. Building Research & Information, 39(1), pp. 66-78. ISSN 0961-3218

Borer, J (2020) Object oriented design of safety critical programmable equipment systems. Journal of Engineering, Design and Technology, 18(5), pp. 1081-1089. ISSN 1726-0531

Borg Axisa, G and Borg, R P (2024) Climate change adaptation in Malta: Assessment of skills in the built environment. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 668-679. ISSN 1759-5916

Borges, D B; Soares, C A P; Najjar, M; Costa, B B F D; Tam, V W Y and Haddad, A N (2025) Project success and critical success factors of construction projects from the perspective of a multicultural team: A case study in Guyana. International Journal of Construction Management, 25(10), pp. 1115-1129. ISSN 1562-3599

Borthwick, F and McAndrew, P (2012) Cultural interpretation of health and safety and its appropriateness in the United Arab Emirates. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bourdeau, L (1999) Sustainable development and the future of construction: A comparison of visions from various countries. Building Research & Information, 27(6), pp. 354-366. ISSN 0961-3218

Boustras, G; Bratskas, R; Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(1), pp. 19-31. ISSN 1726-0531

Bouwer, K A (2016) Building disappointment: the limits and potential of tort liability for energy efficiency problems in domestic buildings. PhD thesis, University College London, UK.

Bouwer, P (2022) A critical appraisal of South Africa's political approach to competition regulation. LLD thesis, University of Pretoria, South Africa.

Bowen, P; Allen, Y; Edwards, P; Cattell, K and Simbayi, L (2014) Guidelines for effective workplace HIV/AIDS intervention management by construction firms. Construction Management and Economics, 32(4), pp. 362-381. ISSN 01446193

Boyal-Seth, H (2011) Assessing the business case for supplier diversity in the construction housing sector. PhD thesis, Nottingham Trent University, UK.

Boyd, N J P (2016) From bicycles to buildings: a SCOT analysis of project level adoption of BIPV. PhD thesis, University of Reading, UK.

Boyd, P and Schweber, L (2012) Variations in the mainstreaming of sustainability: A case study approach. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Branch, H K (2018) Strategies construction project managers use to create environmental sustainability in construction projects. PhD thesis, Walden University, USA.

Branco Pedro, J; Meijer, F and Visscher, H (2009) The Portuguese building regulation system: A critical review. International Journal of Law in the Built Environment, 1(2), pp. 156-171. ISSN 1756-1450

Branco Pedro, J; Meijer, F and Visscher, H (2010) Building control systems of European Union countries: A comparison of tasks and responsibilities. International Journal of Law in the Built Environment, 2(1), pp. 45-59. ISSN 1756-1450

Brandon, P (2012) Sustainable development: Ignorance is fatal: what don't we know? Smart and Sustainable Built Environment, 1(1), pp. 14-28. ISSN 2046-6099

Brchner, J and Olofsson, T (2012) Construction productivity measures for innovation projects. Journal of Construction Engineering and Management, 138(5), pp. 670-677. ISSN 0733-9364

Brennan, M C E (2014) Sustainable construction in the 21st century: An educational perspective to shifting the paradigm. PhD thesis, Liverpool John Moores University, UK.

Brennan M, C A (2013) Development of a measure to assess attitudes towards sustainable development in the built environment: A pilot. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bridgeman, J and Loosemore, M (2024) Evaluating social procurement: A theoretically informed and methodologically robust social return on investment (sroi) analysis of a construction training initiative developed to reduce the risk of youth homelessness in Wales. Construction Management and Economics, 42(5), pp. 387-411. ISSN 01446193

Broday, E E and Gameiro da Silva, M C (2023) The role of internet of things (IoT) in the assessment and communication of indoor environmental quality (IEQ) in buildings: A review. Smart and Sustainable Built Environment, 12(3), pp. 584-606. ISSN 2046-6099

Broer, S (2012) Solutions to climate change in UK housing developments: a lifestyle approach. EngD thesis, University College London, UK.

Brooks, T (2020) Implementation and effectiveness of the ISO 9001 quality management system in the construction sector in the UK and Ireland. PhD thesis, Queen's University Belfast, UK.

Brooks, T; Gunning, J G; Spillane, J P and Cole, J (2021) Regulatory decoupling and the effectiveness of the ISO 9001 quality management system in the construction sector in the UK–a case study analysis. Construction Management and Economics, 39(12), pp. 988-1005. ISSN 01446193

Brown, M (1997) Compliance with health and safety legislation: Is deterrence the answer? In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Brown, N; Wright, A J; Shukla, A and Stuart, G (2010) Longitudinal analysis of energy metering data from non-domestic buildings. Building Research & Information, 38(1), pp. 80-91. ISSN 0961-3218

Bruce, P J; Hrymak, V; Bruce, C and Byrne, J (2025) The role of interpersonal conflict as a cause of work-related stress in construction managers in Ireland. Construction Innovation, 25(1), pp. 61-77. ISSN 1471-4175

Brunklaus, B; Thormark, C and Baumann, H (2010) Illustrating limitations of energy studies of buildings with LCA and actor analysis. Building Research & Information, 38(3), pp. 265-279. ISSN 0961-3218

Bruno, Silvana (2019) The implementation of automatic diagnostics and monitoring towards diagnosis-aided historic building information modelling and management. PhD thesis, Politecnico di Bari, Italy.

Bruun, E P G (2024) Structural scaffold-free cooperative robotic fabrication. PhD thesis, Princeton University, USA.

Bröchner, J; Ang, G K I and Fredriksson, G (1999) Sustainability and the performance concept: Encouraging innovative environmental technology in construction. Building Research & Information, 27(6), pp. 367-372. ISSN 0961-3218

Bu, Guoping (2013) Development of an integrated deterioration method for long-term bridge performance prediction. PhD thesis, Griffith University, Australia.

Bu, Z; Liu, J and Liu, J (2025) Impact of emotions on the behavioral strategies of PPP project stakeholders: An rdeu evolutionary game analysis. Engineering, Construction and Architectural Management, 32(4), pp. 2242-2271. ISSN 0969-9988

Bu, Z; Liu, J and Lu, Z (2025) Research on dynamic profit distribution mechanism and options in PPP project value creation. Journal of Construction Engineering and Management, 151(12): 04025190, ISSN 0733-9364

Buckley, A M (2022) The impact of corporate social responsibility on construction workers. DProf thesis, London Metropolitan University, UK.

Buhamdan, S; Duncheva, T and Alwisy, A (2021) Developing a BIM and simulation-based hazard assessment and visualization framework for CLT construction design. Journal of Construction Engineering and Management, 147(3): 04021003, ISSN 0733-9364

Buijs, A and Silvester, S (1996) Demonstration projects and sustainable housing. Building Research & Information, 24(4), pp. 195-202. ISSN 0961-3218

Bullen, P and Love, P (2011) A new future for the past: A model for adaptive reuse decision-making. Built Environment Project and Asset Management, 1(1), pp. 32-44. ISSN 2044-124X

Burman, E (2016) Assessing the operational performance of educational buildings against design expectations: a case study approach. PhD thesis, University College London, UK.

Burnside-Lawry, J and Carvalho, L (2016) A stakeholder approach to building community resilience: Awareness to implementation. International Journal of Disaster Resilience in the Built Environment, 7(1), pp. 4-25. ISSN 1759-5916

Bust, P D (2011) Changing occupational health and safety practices in the manual handling of highway kerbs: cultural impediments and obstacles to innovation. PhD thesis, Loughborough University, UK.

Butcher, D C A (2011) Learning organization principles and processes: UK construction organization experiences. PhD thesis, University of South Wales, UK.

Butcher, D C A and Sheehan, M J (2010) Excellent contractor performance in the UK construction industry. Engineering, Construction and Architectural Management, 17(1), pp. 35-45. ISSN 0969-9988

Butler, R D (1989) Minority ownership in the construction industry of the puget sound region of Washington state and its struggle for equality. PhD thesis, United States International University, USA.

Bweupe, A S and Mwiya, B (2024) Quality management in ready-mix concrete production in Zambia. Journal of Construction Business and Management, 7(1), pp. 1-15. ISSN 2521-0165

Cadenazzi, T; Keles, B; Rahman, M K and Nanni, A (2022) Life-cycle cost and life-cycle assessment of a monumental fiber-reinforced polymer reinforced concrete structure. Journal of Construction Engineering and Management, 148(9): 05022007, ISSN 0733-9364

Cades, A-P (2018) Influence of psychological capital and thinking perspectives on construction safety climate and performance. PhD thesis, Walden University, USA.

Cai, H; Rahman, A; Su, X and Zhang, H (2014) A GIS-microscopic simulation approach for optimizing road barrier placement and configuration in university campus emergency evacuation. International Journal of Disaster Resilience in the Built Environment, 5(4), pp. 362-379. ISSN 1759-5916

Calcerano, F; Thravalou, S; Martinelli, L; Alexandrou, K; Artopoulos, G and Gigliarelli, E (2024) Energy and environmental improvement of built heritage: HBIM simulation-based approach applied to nine mediterranean case-studies. Building Research & Information, 52(1-2), pp. 225-247. ISSN 0961-3218

Callaghan, N; Avery, T and Mulville, M (2017) Smart motorway' innovation for achieving greater safety and hard shoulder management. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Callaghan, N and Marcano-Salcedo, M (2020) A study of the housing needs of residents in informal settlements in the Dominican Republic. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Calle Muller, C and ElZomor, M (2025) The role of disruptive technologies in enhancing disaster response and resilience in low-income communities. International Journal of Disaster Resilience in the Built Environment, 16(5), pp. 604-619. ISSN 1759-5908

Calor, I and Alterman, R (2017) When enforcement fails: Comparative analysis of the legal and planning responses to non-compliant development in two advanced-economy countries. International Journal of Law in the Built Environment, 9(3), pp. 207-239. ISSN 1756-1450

Calvetti, D (2021) Electronic productivity performance monitoring of construction workers. PhD thesis, Universidade do Porto, Portugal.

Calvetti, D; Magalhães, P N M; Sujan, S F; Gonçalves, M C and Campos De Sousa, H J (2020) Challenges of upgrading craft workforce into Construction 4.0: Framework and agreements. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(4), pp. 158-165. ISSN 17514304

Cameron, I and Duff, R (2007) Use of performance measurement and goal setting to improve construction managers' focus on health and safety. Construction Management and Economics, 25(8), pp. 869-881. ISSN 1466433X

Cameron, I; Gillan, G and Duff, A R (2007) Issues in the selection of fall prevention and arrest equipment. Engineering, Construction and Architectural Management, 14(4), pp. 363-374. ISSN 0969-9988

Cameron, I and Hare, B (2008) Planning tools for integrating health and safety in construction. Construction Management and Economics, 26(9), pp. 899-909. ISSN 1466433X

Cameron, I; Hare, B and Duff, R (2013) An analysis of safety advisor roles and site safety performance. Engineering, Construction and Architectural Management, 20(5), pp. 505-521. ISSN 0969-9988

Campbell, J M and Smith, S D (2006) CBR research using the 'think', 'plan', 'do' classification method. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Campbell, J M and Smith, S D (2006) Improving industrial value and longevity of safety management research. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Campbell, J M and Smith, S D (2007) Knowledge transfer of safety critical information by the internet. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Campbell, J M and Smith, S D (2007) Safety, hazard and risk identification and management in infrastructure management: A project overview. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Campion, N A (2015) Advancing life cycle assessment: Perspectives from the building and healthcare industries. PhD thesis, University of Pittsburgh, USA.

Cao, Z; Huang, L; Mao, Y; Mustafa, M and Mohd Isa, M H (2025) Bridging conservation and modernity: Evaluation of functional priorities for architectural heritage adaptation in China. Building Research & Information, 53(7), pp. 833-845. ISSN 0961-3218

Carbonari, G (2018) Sustainable facilities management with the support of building information modelling. PhD thesis, University of Greenwich, UK.

Carney, M; Wall, J; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E and Önwy-Yazici, E (2008) Challenges to delivering safety training through virtual classes. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Carollo, Federica Carla (2023) Circularity in the construction and demolition waste management chain. PhD thesis, Politecnico di Milano, Italy.

Carpino, C; Loukou, E; Heiselberg, P and Arcuri, N (2020) Energy performance gap of a nearly zero energy building (nZEB) in Denmark: The influence of occupancy modelling. Building Research & Information, 48(8), pp. 899-921. ISSN 0961-3218

Carr, P G (2000) An investigation of the relationship between personality traits and performance for engineering and architectural professionals providing design services to the building sector of the construction industry. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Carrière, S; Weigend Rodríguez, R; Pey, P; Pomponi, F and Ramakrishna, S (2020) Circular cities: The case of Singapore. Built Environment Project and Asset Management, 10(4), pp. 491-507. ISSN 2044-124X

Carswell, A T and Smith, S (2009) The greening of the multifamily residential sector. Journal of Engineering, Design and Technology, 7(1), pp. 65-80. ISSN 1726-0531

Carter, K (2005) ConSus: a decision support tool for the procurement of sustainable social housing. PhD thesis, Heriot-Watt University, UK.

Carter, K and Fortune, C (2003) Procuring sustainable projects: A grounded approach. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Carter, K and Fortune, C (2007) Sustainable development policy perceptions and practice in the UK social housing sector. Construction Management and Economics, 25(4), pp. 399-408. ISSN 1466433X

Cavalcante, Marcelo Gadelha (2019) Formation of operational risk in civil construction. PhD thesis, Universidade de Fortaleza, Brazil.

Celentano, G (2021) The regenerative development potential of the construction sector in the informal city: The cases of Bangkok, Nairobi and Cape Town. DSc thesis, ETH Zürich, Switzerland.

Cemesova, A (2013) Enhancing BIM-based data transfer to support the design of low energy buildings. PhD thesis, Cardiff University, UK.

Cerić, A and Ivić, I (2025) Communication challenges and blockchain in building energy efficiency retrofits: Croatia case. Engineering, Construction and Architectural Management, 32(1), pp. 1-15. ISSN 0969-9988

Cevallos, O A; Jaramillo, D; Ávila, C and Aldaz, X (2017) Production and quality levels of construction materials in Andean regions: A case study of Chimborazo, Ecuador. Journal of Construction in Developing Countries, 22(1), pp. 115-136. ISSN 1823-6499

Cha, H S; Kim, J and Han, J Y (2009) Identifying and assessing influence factors on improving waste management performance for building construction projects. Journal of Construction Engineering and Management, 135(7), pp. 647-656. ISSN 0733-9364

Cha, H S; Kim, K H and Kim, C K (2012) Case study on selective demolition method for refurbishing deteriorated residential apartments. Journal of Construction Engineering and Management, 138(2), pp. 294-303. ISSN 0733-9364

Challender, J; Farrell, P and Sherratt, F (2014) Partnering practices: An investigation of influences on project success. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Chambers, M L (2021) Fine particulate air pollution and accident risk: Three essays. PhD thesis, Vanderbilt University, USA.

Chammout, B and El-Adaway, I H (2025) Circular economy in construction: Decision-making factors and future research avenues. Journal of Construction Engineering and Management, 151(6): 04025059, ISSN 0733-9364

Chan, A P C; Chiang, Y H; Wong, F K W; Liang, S and Abidoye, F A (2020) Work-life balance for construction manual workers. Journal of Construction Engineering and Management, 146(5): 04020031, ISSN 0733-9364

Chan, A P C; Javed, A A; Lyu, S; Hon, C K H and Wong, F K W (2016) Strategies for improving safety and health of ethnic minority construction workers. Journal of Construction Engineering and Management, 142(9): 05016007, ISSN 0733-9364

Chan, A P C; Lam, P T I; Chan, D W M; Cheung, E and Ke, Y (2010) Critical success factors for PPPs in infrastructure developments: Chinese perspective. Journal of Construction Engineering and Management, 136(5), pp. 484-494. ISSN 0733-9364

Chan, D W M; Hung, H T W; Chan, A P C and Lo, T K K (2014) Overview of the development and implementation of the mandatory building inspection scheme (MBIS) in Hong Kong. Built Environment Project and Asset Management, 4(1), pp. 71-89. ISSN 2044-124X

Chan, E H W (1997) Amicable dispute resolution in the people's republic of China and its implications for foreign-related construction disputes. Construction Management and Economics, 15(6), pp. 539-548. ISSN 01446193

Chan, E H W and Chan, A T S (1999) Imposing ISO 9000 quality assurance system on statutory agents in Hong Kong. Journal of Construction Engineering and Management, 125(4), pp. 285-291. ISSN 0733-9364

Chan, P W (2009) The dominance of practice in constructionarium: Exploring the challenges of linking theory and practice. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Chan, T K and Gao, S (2019) Can we really measure construction productivity? In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Chand, A M and Loosemore, M (2015) A socio-ecological analysis of hospital resilience to extreme weather events. Construction Management and Economics, 33(11-12), pp. 907-920. ISSN 01446193

Chang, C Y; Chou, H Y and Wang, M T (2006) Characterizing the corporate governance of UK listed construction companies. Construction Management and Economics, 24(6), pp. 647-656. ISSN 1466433X

Chang, J; Xie, X and Parlikad, A K (2025) Cloud-based building information modelling (CBIM): Software engineers' insights into improving asset information quality. Built Environment Project and Asset Management, 15(3), pp. 594-611. ISSN 2044-124X

Chang, R D; Zuo, J; Soebarto, V; Zhao, Z Y; Zillante, G and Gan, X L (2017) Discovering the transition pathways toward sustainability for construction enterprises: Importance-performance analysis. Journal of Construction Engineering and Management, 143(6): 04017013, ISSN 0733-9364

Chang, Ruidong (2017) Towards sustainability in the Chinese construction industry: A transition approach. PhD thesis, University of Adelaide, Australia.

Chantawit, D; Hadikusumo, B H W; Charoenngam, C and Rowlinson, S (2005) 4DCAD-Safety: Visualizing project scheduling and safety planning. Construction Innovation, 5(2), pp. 99-114. ISSN 1471-4175

Chao, Q; Rotimi, F E and Rotimi, J O B (2021) International construction joint ventures as a resourcing model. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(1), pp. 28-37. ISSN 17514304

Chappells, H and Shove, E (2005) Debating the future of comfort: Environmental sustainability, energy consumption and the indoor environment. Building Research & Information, 33(1), pp. 32-40. ISSN 0961-3218

Charles, S; Vidyaratne, H and Melagoda, D G (2020) Prospects and restraints of green roofs for high-rise buildings in Sri Lanka. Built Environment Project and Asset Management, 10(2), pp. 246-260. ISSN 2044-124X

Charles, S H; Chang-Richards, A and Yiu, T W (2022) New success factors for construction projects: A systematic review of post-2004 literature. Construction Innovation, 22(4), pp. 891-914. ISSN 1471-4175

Charlson, J (2014) Law for engineering undergraduates on accredited courses 1. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(4), pp. 201-206. ISSN 17514304

Charlson, J (2021) Emerging trends in construction law at the confluence of academia and industry. PhD thesis, University of Wolverhampton, UK.

Che Ibrahim, C K I; Manu, P; Cheung, C; Guo, B H W and Agyekum, K (2025) Building a framework for dynamic organisational capabilities in design for safety (dfs) for Malaysian construction organisations. Journal of Engineering, Design and Technology, 23(6), pp. 1958-1978. ISSN 1726-0531

Che Ibrahim, C K I; Manu, P; Belayutham, S; Cheung, C; Mohamad, M Z and Yunusa-Kaltungo, A (2022) Design for safety organisational capability in Malaysia: A multi-stakeholder perspective. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Cheetham, D W (2000) Improving site safety: Enforcement of the cdm regulations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Chellappa, V and Ginda, G (2023) Application of multiple-criteria decision making methods for construction safety research. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(3), pp. 127-136. ISSN 17514304

Chellappa, V and Gunasekaran, A L (2022) Drivers for implementing design for safety in construction: A review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 39-49. ISSN 17514304

Chellappa, V; Srivastava, V and Salve, U R (2021) A systematic review of construction workers' health and safety research in India. Journal of Engineering, Design and Technology, 19(6), pp. 1488-1504. ISSN 1726-0531

Chelson, D E (2010) The effects of building information modeling on construction site productivity. PhD thesis, University of Maryland, College Park, USA.

Chen, C (2019) Heterogeneous integration of BIM with low-cost indoor mobile laser scanning method for building fabric maintenance in China. PhD thesis, University of Nottingham, UK.

Chen, J J and Chambers, D (1999) Sustainability and the impact of Chinese policy initiatives upon construction. Construction Management and Economics, 17(5), pp. 679-687. ISSN 01446193

Chen, P; Partington, D and Qiang, M (2009) Cross-cultural understanding of construction project managers' conceptions of their work. Journal of Construction Engineering and Management, 135(6), pp. 477-487. ISSN 0733-9364

Chen, Q and Jin, R (2013) Multilevel safety culture and climate survey for assessing new safety program. Journal of Construction Engineering and Management, 139(7), pp. 805-817. ISSN 0733-9364

Chen, Q; Jin, R and Soboyejo, A (2013) Understanding a contractor's regional variations in safety performance. Journal of Construction Engineering and Management, 139(6), pp. 641-653. ISSN 0733-9364

Chen, R (2025) Investigation of mechanical and thermal performances and masonry quality for new raw soil-based insulating hollow bricks. Architectural Engineering and Design Management, 21(3), pp. 533-552. ISSN 1745-2007

Chen, W (2019) Integration of building information modeling and internet of things for facility maintenance management. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Chen, X; Chang-Richards, A Y; Pelosi, A; Jia, Y; Shen, X; Siddiqui, M K and Yang, N (2022) Implementation of technologies in the construction industry: A systematic review. Engineering, Construction and Architectural Management, 29(8), pp. 3181-3209. ISSN 0969-9988

Chen, X; Chang-Richards, A Y; Yiu, T W; Ling, F Y Y; Pelosi, A and Yang, N (2024) A multivariate regression analysis of barriers to digital technologies adoption in the construction industry. Engineering, Construction and Architectural Management, 31(11), pp. 4281-4307. ISSN 0969-9988

Chen, X; Chen, Y; Zhang, X and He, Q (2025) Green transformational leadership and green innovation in megaprojects: Is green knowledge sharing a missing link? Engineering, Construction and Architectural Management, 32(1), pp. 194-213. ISSN 0969-9988

Chen, X B and Kim, T W (2017) Automated mapping of user activities onto flexible space in space-use analysis. Journal of Construction Engineering and Management, 143(8): 04017034, ISSN 0733-9364

Chen, Xinyu (2025) Multimodal data fusion-based ergonomic assessment method for construction workers. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Chen, Y (2017) Factors affecting safety performance of construction workers: Safety climate, interpersonal conflicts at work, and resilience. PhD thesis, University of Toronto, Canada.

Chen, Y; Cai, X; Li, J; Lin, P; Song, H; Liu, G; Cao, D and Ma, X (2023) The values and barriers of BIM implementation combination evaluation based on stakeholder theory: A study in China. Engineering, Construction and Architectural Management, 30(7), pp. 2814-2836. ISSN 0969-9988

Chen, Y; Chen, Y; Smyth, H and Fu, Y (2021) Enforcement against contract violation in Chinese construction projects: Impacts of trust and perceived intentionality. Construction Management and Economics, 39(8), pp. 687-703. ISSN 01446193

Chen, Z; Li, H; Ross, A; Khalfan, M M A and Kong, S C W (2008) Knowledge-driven ANP approach to vendors evaluation for sustainable construction. Journal of Construction Engineering and Management, 134(12), pp. 928-941. ISSN 0733-9364

Cheng, L; Ren, H; Guo, H and Cao, D (2025) Research on the evaluation method for safety cognitive ability of workers in high-risk construction positions. Engineering, Construction and Architectural Management, 32(12), pp. 8196-8218. ISSN 0969-9988

Cheng, B; Huang, J; Guo, Z; Li, J and Chen, H (2023) Towards sustainable construction through better construction and demolition waste management practices: A SWOT analysis of Suzhou, China. International Journal of Construction Management, 23(15), pp. 2614-2624. ISSN 1562-3599

Cheong, C S (2010) Contractors business development for overseas markets. PhD thesis, Loughborough University, UK.

Cherkos, F. D. and Shuka, J. K. (2026) Human resource management practices for successful performance of construction companies: Unveiling hierarchical importance and interplay. International Journal of Construction Management, 26(7), pp. 1113-1133. ISSN 1562-3599

Chesworth, B (2015) Is the concept of zero harm an achievable goal? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Cheung, C; Muchoki, L; Jin, R; Adamu, Z; Chi, N W and Lin, J C (2023) A systematic review of digitalisation adoptions in construction safety education and training. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Cheung, C M and Qingbin, C (2016) Setting the stage for effective safety leadership in construction: The antecedents of safety-specific transformational leadership behaviours. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Cheung, M (2017) The antecedents of safety leadership. PhD thesis, University of Maryland, College Park, USA.

Chi, C S F and Javernick-Will, A N (2011) Institutional effects on project arrangement: High-speed rail projects in China and Taiwan. Construction Management and Economics, 29(6), pp. 595-611. ISSN 1466433X

Chiang, Y H; Li, V J; Zhou, L; Wong, F and Lam, P (2016) Evaluating sustainable building-maintenance projects: Balancing economic, social, and environmental impacts in the case of Hong Kong. Journal of Construction Engineering and Management, 142(2): 06015003, ISSN 0733-9364

Chiba, Y; Prabhakar, S V R K; Islam, M A and Akber, M A (2018) Priority practices for addressing non-economic loss and damages caused by cyclones in Bangladesh: Case study of Koyra. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 333-347. ISSN 1759-5916

Chidiobi, C (2022) Development of frameworks for the management of materials procurement and construction waste for Nigerian contractors. PhD thesis, University of the West of England, Bristol, UK.

Chigara, B. and Smallwood, J. (2026) The impact of procurement on construction health and safety (H&S) in Zimbabwe. Journal of Engineering, Design and Technology, 24(4), pp. 943-962. ISSN 1726-0531

Chigara, B (2018) Integrating sustainability principles in construction health and safety management practices in Zimbabwe. PhD thesis, Nelson Mandela University, South Africa.

Chigara, B and Moyo, T (2022) Factors affecting the delivery of optimum health and safety on construction projects during the covid-19 pandemic in Zimbabwe. Journal of Engineering, Design and Technology, 20(1), pp. 24-46. ISSN 1726-0531

Chigara, B and Moyo, T (2023) The impact of COVID-19 on the construction sector in Zimbabwe. Journal of Construction in Developing Countries, 28(1), pp. 91-111. ISSN 1823-6499

Chileshe, N (2004) The application of TQM within small and medium sized construction related organisations. PhD thesis, Sheffield Hallam University, UK.

Chileshe, N and Dzisi, E (2012) Benefits and barriers of construction health and safety management (HSM): Perceptions of practitioners within design organisations. Journal of Engineering, Design and Technology, 10(2), pp. 276-298. ISSN 1726-0531

Chinda, T and Mohamed, S (2008) Structural equation model of construction safety culture. Engineering, Construction and Architectural Management, 15(2), pp. 114-131. ISSN 0969-9988

Chinda, Thanwadee (2008) A system dynamics approach to construction safety culture. PhD thesis, Griffith University, Australia.

Cho, S K (2011) The relation between lean construction and performance in the Korean construction industry. PhD thesis, University of California, Berkeley, USA.

Choi, C Y and Honda, R (2019) Motive and conflict in the disaster recovery process: Housing reconstruction in Sri Lanka after the 2004 Indian ocean tsunami. International Journal of Disaster Resilience in the Built Environment, 10(5), pp. 408-419. ISSN 1759-5916

Choi, K; Lee, H W; Mao, Z; Lavy, S and Ryoo, B Y (2016) Environmental, economic, and social implications of highway concrete rehabilitation alternatives. Journal of Construction Engineering and Management, 142(2): 04015079, ISSN 0733-9364

Choi, K; Son, K; Woods, P and Park, Y J (2012) LEED public transportation accessibility and its economic implications. Journal of Construction Engineering and Management, 138(9), pp. 1095-1102. ISSN 0733-9364

Choi, S D (2008) Postural balance and adaptations in transitioning sloped surfaces. International Journal of Construction Education and Research, 4(3), pp. 189-199. ISSN 1557-8771

Chou, J. S.; Yeh, P. C.; Liu, C. Y. and Chen, K. J. (2026) Improving detection of pollution fee declarations for environmental policy compliance through metaheuristic-optimized ensemble learning. Engineering, Construction and Architectural Management, 33(7), pp. 5820-5848. ISSN 0969-9988

Choudhary, K; Gill, G; Sangwa, N R and Sarna, B (2025) Utilising copper tailings as a sustainable alternative to conventional structural filling materials: LCA analysis. Built Environment Project and Asset Management, 15(3), pp. 415-431. ISSN 2044-124X

Choudhry, R M; Fang, D and Lingard, H (2009) Measuring safety climate of a construction company. Journal of Construction Engineering and Management, 135(9), pp. 890-899. ISSN 0733-9364

Chouhan, S; Narang, A and Mukherjee, M (2024) Multihazard risk assessment of educational institutes of dehradun, uttarakhand. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 45-58. ISSN 1759-5916

Chowdhury, S; Zhu, J; Rasoulkhani, K; Mostafavi, A; Jaselskis, E; Stoa, R; Li, Q; Banerjee, S; Alsharef, A and Brannen, L (2020) Guidelines for robust adaptation to environmental regulations in infrastructure projects. Journal of Construction Engineering and Management, 146(10): 04020121, ISSN 0733-9364

Christermaller, F; Ibrahim, C K I C; Manu, P; Belayutham, S; Mahamadu, A-M and Yunusa-Kaltungo, A (2022) Implementation of design for safety (dfs) in construction in developing countries: A study of designers in Malaysia. Construction Economics and Building, 22(2), pp. 1-26. ISSN 2204-9029

Christudason, A; Kenna, P; Amann, W and Mundt, A (2010) Designing a new rental housing law for Romania. International Journal of Law in the Built Environment, 2(2), pp. 157-177. ISSN 1756-1450

Chua, D K H and Goh, Y M (2004) Incident causation model for improving feedback of safety knowledge. Journal of Construction Engineering and Management, 130(4), pp. 542-551. ISSN 0733-9364

Chua, D K H and Goh, Y M (2005) Poisson model of construction incident occurrence. Journal of Construction Engineering and Management, 131(6), pp. 715-722. ISSN 0733-9364

Chun, C K; Li, H and Skitmore, M (2012) The use of virtual prototyping for hazard identification in the early design stage. Construction Innovation, 12(1), pp. 29-42. ISSN 1471-4175

Chung, H C P and Adeyeye, K (2018) Structural flood damage and the efficacy of property-level flood protection. International Journal of Building Pathology and Adaptation, 36(5), pp. 471-499. ISSN 23984708

Chung, J Y (1984) Comparison of safety programs and employee attitudes within university of California facilities management departments. PhD thesis, University of California, Santa Barbara, USA.

Chung, W W S; Tariq, S; Mohandes, S R and Zayed, T (2023) IoT-based application for construction site safety monitoring. International Journal of Construction Management, 23(1), pp. 58-74. ISSN 1562-3599

Cioffi, J; Wilkes, L and Hartcher-O'Brien, J (2002) Outdoor workers and sun protection: Knowledge and behaviour. Construction Economics and Building, 2(2), pp. 10-14. ISSN 2204-9029

Ciribizni, A and Galimberti, G (2005) H&S planning and 4D project scheduling. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Clark, P I (2011) CDM regulations: safety targeted assessment through gateway evaluation (stage) approach. PhD thesis, University of the West of England, Bristol, UK.

Clarke, L (2006) Valuing labour. Building Research & Information, 34(3), pp. 246-256. ISSN 0961-3218

Clarke, L; Gleeson, C and Winch, C (2016) What kind of expertise is needed for low energy construction? In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Clarke, L; Gleeson, C and Winch, C (2017) What kind of expertise is needed for low energy construction? Construction Management and Economics, 35(3), pp. 78-89. ISSN 01446193

Clarke, L; Sahin-Dikmen, M and Winch, C (2020) Transforming vocational education and training for nearly zero-energy building. Buildings & Cities, 1(1), pp. 650-661. ISSN 2632-6655

Clarke, L; van der Meer, M; Bingham, C; Michielsens, E and Miller, S (2009) Enabling and disabling: Disability in the British and Dutch construction sectors. Construction Management and Economics, 27(6), pp. 555-566. ISSN 1466433X

Clarke, N; Bradley, J G and Spillane, J P (2020) Mental health and well-being in micro-enterprises in the construction industry: An Irish perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Clegg, P (2012) A practitioner's view of the 'regenerative paradigm'. Building Research & Information, 40(3), pp. 365-368. ISSN 0961-3218

Clegg, S and Kreiner, K (2014) Fixing concrete: Inquiries, responsibility, power and innovation. Construction Management and Economics, 32(3), pp. 262-278. ISSN 01446193

Clements-Croome, D (2005) Designing the indoor environment for people. Architectural Engineering and Design Management, 1(1), pp. 45-55. ISSN 1745-2007

Clevenger, C M and Haymaker, J R (2012) The value of design strategies applied to energy efficiency. Smart and Sustainable Built Environment, 1(3), pp. 222-240. ISSN 2046-6099

Close, R and Loosemore, M (2014) Breaking down the site hoardings: Attitudes and approaches to community consultation during construction. Construction Management and Economics, 32(7-8), pp. 816-828. ISSN 01446193

Coble, R J (1992) An empirical investigation of factors related to the construction industry drug-free workplace for general contractors. PhD thesis, University of Florida, USA.

Cocerhan, I and Bradley, J (2019) Investigation into how technology can overcome language barriers experienced by construction workers from eastern Europe on sites in London. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Coenen, T B J; Volker, L and Visscher, K (2023) Circular infrastructure in terms of institutional logics. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Coffie, G H; Novieto, D T and Yankah, J E (2025) Stakeholder views of prevalent unethical practices in the Ghanaian construction industry. Engineering, Construction and Architectural Management, 32(2), pp. 1010-1031. ISSN 0969-9988

Cohen, R and Bordass, B (2015) Mandating transparency about building energy performance in use. Building Research & Information, 43(4), pp. 534-552. ISSN 0961-3218

Cole, R J (1999) Building environmental assessment methods: Clarifying intentions. Building Research & Information, 27(4-5), pp. 230-246. ISSN 0961-3218

Cole, R J (2001) Lessons learned, future directions and issues for GBC. Building Research & Information, 29(5), pp. 355-373. ISSN 0961-3218

Cole, R J (2005) Building environmental assessment methods: Redefining intentions and roles. Building Research & Information, 33(5), pp. 455-467. ISSN 0961-3218

Cole, R J; Robinson, J; Brown, Z and O'Shea, M (2008) Re-contextualizing the notion of comfort. Building Research & Information, 36(4), pp. 323-336. ISSN 0961-3218

Coleman, C E; Mwanaumo, E M; Muya, M and Rahman, R A (2025) Financial challenges leading to premature contract termination in Ghanaian construction industry: Causes and mitigation strategies. Journal of Construction Business and Management, 7(2), pp. 45-66.

Collinge, W (2020) Stakeholder engagement in construction: Exploring corporate social responsibility, ethical behaviors, and practices. Journal of Construction Engineering and Management, 146(3): 04020003, ISSN 0733-9364

Collinge, W H (2025) Advancing social practice understandings of digital innovation delivery in construction project management. Engineering, Construction and Architectural Management, 32(7), pp. 4611-4630. ISSN 0969-9988

Conejos, S; Chew, M Y L and Yung, E H K (2017) The future adaptivity of nineteenth century heritage buildings. International Journal of Building Pathology and Adaptation, 35(4), pp. 332-347.

Conejos, S; Langston, C; Chan, E H W and Chew, M Y L (2016) Governance of heritage buildings: Australian regulatory barriers to adaptive reuse. Building Research & Information, 44(5-6), pp. 507-519. ISSN 0961-3218

Conejos, S; Ubando, A and Lin Chew, M Y (2022) Design for maintainability tool for nano-façade coating applications on high-rise façades in the tropics. Built Environment Project and Asset Management, 12(1), pp. 70-95. ISSN 2044-124X

Connelly, J (2001) Developing guidelines for adopting an environmental orientation for construction and related organisations within the supply chain in the construction industry. PhD thesis, Heriot-Watt University, UK.

Cooke, T and Lingard, H (2011) A retrospective analysis of work-related deaths in the Australian construction industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Cooke, T; Lingard, H and Blismas, N (2013) Australian construction supervisors' response to occupational health and safety. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(6), pp. 287-296. ISSN 17514312

Cooke, T; Lingard, H; Blismas, N and Stranieri, A (2008) ToolSHeD™: The development and evaluation of a decision support tool for health and safety in construction design. Engineering, Construction and Architectural Management, 15(4), pp. 336-351. ISSN 0969-9988

Cooney, J P; Oloke, D and Gyoh, L (2023) A novel heritage BIM (HBIM) framework development for heritage buildings refurbishment based on an investigative study of microorganisms. Journal of Engineering, Design and Technology, 21(4), pp. 1046-1082. ISSN 1726-0531

Cooper, I (1999) Which focus for building assessment methods: environmental performance or sustainability? Building Research & Information, 27(4-5), pp. 321-331. ISSN 0961-3218

Cooper, I (2002) Transgressing discipline boundaries: Is bequest an example of 'the new production of knowledge'? Building Research & Information, 30(2), pp. 116-129. ISSN 0961-3218

Cooper, I (2012) Winning hearts and minds or evidence-driven: Which trajectory for regenerative design? Building Research & Information, 40(3), pp. 357-360. ISSN 0961-3218

Cooper, J; Lee, A and Jones, K (2020) Sustainable built asset management performance indicators and attributes: A UK social housing case study example. International Journal of Building Pathology and Adaptation, 38(3), pp. 508-522. ISSN 23984708

Corcoran, J (2011) Engaging the workforce to establish a safety-conscious culture. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(2), pp. 71-78. ISSN 17514312

Correia, Marcia Castilho (2019) Assessment of the quality of architectural projects for public health research laboratories: Sustainability and biosafety. PhD thesis, Universidade Federal do Rio de Janeiro, Brazil.

Costa, Rafael de Oliveira (2021) Applicability of international environmental law in the construction of corporate social responsibility. PhD thesis, Universidade de São Paulo, Brazil.

Costa, S; Sameiro Carvalho, M; Pimentel, C and Duarte, C (2025) Conceptualizing the phenomenon of construction industrialization: linking theory and practice through a cross-sector case study. International Journal of Construction Management, 25(8), pp. 923-931. ISSN 1562-3599

Cothern, E J (2021) Exposure to respirable crystalline silica during five OSHA Table 1 tasks and the effectiveness of dust controls, the contribution of background silica dust to personal exposures, and the use of a photometric instrument to assess silica dust exposure in real time. PhD thesis, Colorado State University, USA.

Cozens, P; Waters, J and Neale, R (2002) A virtual reality approach to personal safety and the design of built environment facilities. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Craig, N; Pilcher, N; Forster, A M and Kennedy, C (2023) Ethanol-driven building fungus colonisation: "Whisky black" in urban built environments. International Journal of Building Pathology and Adaptation, 41(1), pp. 238-257. ISSN 23984708

Craig, R W (2000) Controversial aspects of Commonwealth Construction and Engineering Procurement Law. PhD thesis, Loughborough University, UK.

Craighill, A L (2002) Lifecycle assessment and evaluation of construction and demolition waste management. PhD thesis, University of East Anglia, UK.

Crawley, J; Biddulph, P; Wingfield, J; Ashdown, M; Lowe, R and Elwell, C (2020) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(1), pp. 3-19. ISSN 23984708

Cuellar Franca, R M (2013) Sustainability assessment framework for the residential construction sector in the UK. PhD thesis, University of Manchester, UK.

Cui, C; Xie, T; Liu, Y; Liu, M; Cao, H and Li, H (2025) Public perceived efficacy of emergency infrastructure project: Antecedents in a triadic reciprocal determinism. Engineering, Construction and Architectural Management, 32(8), pp. 5291-5310. ISSN 0969-9988

Curran, M; Spillane, J P and Clarke-Hagan, D (2019) The considerate constructors scheme: Improving the image of construction, but how considerate are they to contractors? In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Curwell, S and Cooper, I (1998) The implications of urban sustainability. Building Research & Information, 26(1), pp. 17-28. ISSN 0961-3218

Curwell, S; Deakin, M; Cooper, I; Paskaleva-Shapira, K; Ravetz, J and Babicki, D (2005) Citizens' expectations of information cities: Implications for urban planning and design. Building Research & Information, 33(1), pp. 55-66. ISSN 0961-3218

Curwell, S; Yates, A; Howard, N; Bordass, B and Doggart, J (1999) The green building challenge in the UK. Building Research & Information, 27(4-5), pp. 286-293. ISSN 0961-3218

D'Orazio, M; Bernardini, G and Di Giuseppe, E (2024) Improving sustainable management of university buildings based on occupancy data. Journal of Construction Engineering and Management, 150(1): 04023154, ISSN 0733-9364

Dabok, M M (2022) A training and skills development conceptual framework for construction technicians in Nigeria. PhD thesis, University of Central Lancashire, UK.

Dadashi Haji, M and Behnam, B (2025) An automated BIM and system dynamics tool for assessing safety leading indicators in construction projects. International Journal of Building Pathology and Adaptation, 43(3), pp. 414-439. ISSN 2398-4708

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

Dalgliesh, C D; Bowen, P A and Hill, R C (1997) Environmental sustainability in the delivery of affordable housing in South Africa. Engineering, Construction and Architectural Management, 4(1), pp. 23-39. ISSN 0969-9988

Dalirazar, S and Sabzi, Z (2023) Strategic analysis of barriers and solutions to development of sustainable buildings using pestle technique. International Journal of Construction Management, 23(1), pp. 167-181. ISSN 1562-3599

Damdelen, O and Tansu, A (2022) Influence of recycled plastic on the thermal transmittance and sustainable assessment of concrete mixes. Journal of Construction Engineering and Management, 148(12): 04022135, ISSN 0733-9364

Dang, X; Wang, M; Deng, X; Mao, H and He, P (2025) What affects the corporate social responsibility practices of Chinese international contractors considering dynamic interactions? A hybrid structural equation modeling–fuzzy cognitive map approach. Engineering, Construction and Architectural Management, 32(4), pp. 2646-2671. ISSN 0969-9988

Daniel, E I; Nwankwo, N; Adah, C; Oshodi, O; Emuze, F; Chinyio, E and Umeokafor, N (2026) An exploratory study into UK construction industry response to digitalised health and safety management. Journal of Engineering, Design and Technology, 24(1), pp. 45-63. ISSN 1726-0531

Daniel, L (2015) Safety leadership defined within the Australian construction industry. Construction Economics and Building, 15(4), pp. 1-15. ISSN 2204-9029

Danso, F O; Agyekum, K; Manu, P; Adinyira, E; Ahadzie, D K and Badu, E (2024) Examining the perception of site workers of their risk-taking behaviours on construction sites in Ghana. Engineering, Construction and Architectural Management, 31(8), pp. 2997-3023. ISSN 0969-9988

Danso, F O; Badu, E; Ahadzie, D K and Manu, P (2015) Health and safety issues and mitigation measures relating to adaptive-retrofits projects: Literature review and research implications for the Ghanaian construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Dao, M A (2008) Determinants of firm compliance with environmental laws : A case study of Vietnam. PhD thesis, National University of Singapore, Singapore.

Daoud, A. O.; Lal, R.; Gouda Mohamed, A.; Mohamed, M. and Wefki, H. (2026) An implementation framework for blockchain and smart contracts adoption in the egyptian construction sector. International Journal of Construction Management, 26(9), pp. 1707-1726. ISSN 1562-3599

Das, D K (2022) Exploring the factors and measures to improve safety in road construction in India. Journal of Construction in Developing Countries, 27(1), pp. 139-152. ISSN 1823-6499

Das, P K (2006) A sustainability impact-assessment tool for selected building technologies in rural India: the case of the Andhra Pradesh primary education project. PhD thesis, University of Newcastle upon Tyne, UK.

Davies, John P (2009) Alliance contracts and public sector governance. PhD thesis, Griffith University, Australia.

Davies, P J (2015) Assessing initial embodied energy in UK non-domestic construction projects. EngD thesis, Loughborough University, UK.

Davies, P J; Emmitt, S and Firth, S K (2014) Challenges for capturing and assessing initial embodied energy: A contractor's perspective. Construction Management and Economics, 32(3), pp. 290-308. ISSN 01446193

Day, K (2024) Emulating the past, envisioning the future: A study of CAD file preservation in Australian architectural practices. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

De Cicco, S (2004) Design and development of an information management system for highway construction specifications. PhD thesis, University of Wisconsin - Madison, USA.

De Jarnette, V; McCarthy, L M; Bennert, T and Guercio, M C (2013) Use of mechanistic-empirical pavement design principles to assign asphalt pavement pay factor adjustments. Journal of Construction Engineering and Management, 139(11): 4013024, ISSN 0733-9364

De Luca, A; Chen, L and Gharehbaghi, K (2021) Sustainable utilization of recycled aggregates: Robust construction and demolition waste reduction strategies. International Journal of Building Pathology and Adaptation, 39(4), pp. 666-682. ISSN 23984708

De Saram, D D (2002) Measuring the quality of contractors' co-ordination activities during the construction process. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

De Silva, G D R; Perera, B A K S and Rodrigo, M N N (2019) Adaptive reuse of buildings: The case of Sri Lanka. Journal of Financial Management of Property and Construction, 24(1), pp. 79-96. ISSN 1366-4387

De Silva, N; Samanmali, R and De Silva, H L (2017) Managing occupational stress of professionals in large construction projects. Journal of Engineering, Design and Technology, 15(4), pp. 488-504.

De Silva, N and Wimalaratne, P L I (2012) OSH management framework for workers at construction sites in Sri Lanka. Engineering, Construction and Architectural Management, 19(4), pp. 369-392. ISSN 0969-9988

De Toldi, T and Pestre, T (2023) The relevance of cut-stone to strategies for low-carbon buildings. Buildings & Cities, 4(1), pp. 229-257. ISSN 2632-6655

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

De Zoysa, G N S (2006) Application and re-use of information and knowledge in managing risks of infrastructure projects. PhD thesis, University of British Columbia, Canada.

Deb, A (1998) Sustainable cities in developing countries. Building Research & Information, 26(1), pp. 29-38. ISSN 0961-3218

Debrah, C and Owusu-Manu, D G (2022) An apposite framework for green cities development in developing countries: The case of Ghana. Construction Innovation, 22(4), pp. 789-808. ISSN 1471-4175

Debrah, C; Owusu-Manu, D G; Amonoo-Parker, L; Baiden, B K; Oduro-Ofori, E and Edwards, D J (2023) A factor analysis of the key sustainability content underpinning green cities development in Ghana. International Journal of Construction Management, 23(14), pp. 2469-2478. ISSN 1562-3599

Debrah, C; Owusu-Manu, D G; Darko, A; Oduro-Ofori, E; Acquah, P C and Asamoah, E (2023) Drivers for green cities development in developing countries: Ghanaian perspective. International Journal of Construction Management, 23(6), pp. 1086-1096. ISSN 1562-3599

Debrah, C; Owusu-Manu, D G; Kissi, E; Oduro-Ofori, E and Edwards, D J (2022) Barriers to green cities development in developing countries: Evidence from Ghana. Smart and Sustainable Built Environment, 11(3), pp. 438-453. ISSN 2046-6099

Deep, A; Nayyer, M I and Annamalai, T R (2025) When sauce for the goose is not sauce for the gander—the divergent impact of transparency law in infrastructure procurement: Evidence from EPC and PPP road projects in India. Construction Management and Economics, 43(11), pp. 922-937. ISSN 0144-6193

Deepak, D and Mahesh, G (2023) A framework for enhancing construction safety through knowledge-based safety culture indicators. International Journal of Construction Management, 23(12), pp. 2039-2047. ISSN 1562-3599

Deepak, M D and Mahesh, G (2019) Developing a knowledge-based safety culture instrument for construction industry: Reliability and validity assessment in Indian context. Engineering, Construction and Architectural Management, 26(11), pp. 2597-2613. ISSN 0969-9988

Deepak, M D and Mahesh, G (2024) Developing an assessment framework for evaluating knowledge-based safety culture in construction organizations. International Journal of Construction Education and Research, 20(2), pp. 177-196. ISSN 15578771

Dehbandi, R and Mottaki, Z (2026) A comparative analysis of housing quality rating systems: Insights for contextual adaptation and policy development. Building Research & Information, 54(3), pp. 330-344. ISSN 0961-3218

Deilmann, C; Effenberger, K H and Banse, J (2009) Housing stock shrinkage: Vacancy and demolition trends in Germany. Building Research & Information, 37(5-6), pp. 660-668. ISSN 0961-3218

Delgado-Hernandez, D J; Bampton, K E and Aspinwall, E (2007) Quality function deployment in construction. Construction Management and Economics, 25(6), pp. 597-609. ISSN 1466433X

Dempsey, H; Curran, M and Spillane, J P (2020) Scaffolding safety in the UK and Ireland: A framework to improve health and safety neglect on small and medium-sized construction projects. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Deng, Y and Poon, S W (2013) Meeting sustainability challenges of mega-event flagships. Engineering, Construction and Architectural Management, 20(1), pp. 46-62. ISSN 0969-9988

Dennehy, G; Kennedy, B and Spillane, J (2023) Building control (amendment) regulations 2014: Integration and compliance in large Irish construction organisations. International Journal of Building Pathology and Adaptation, 41(1), pp. 225-237. ISSN 23984708

Denny-Smith, G (2021) How compliance imperatives stifle the impact of social procurement. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Denny-Smith, G and Loosemore, M (2017) Assessing the impact of australia's indigenous procurement policy using strain theory. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Denny-Smith, George (2022) The social value of indigenous procurement policies in the Australian construction industry. PhD thesis, University of New South Wales, Australia.

Deshpande, A S (2009) Best practices for the management of design in fast track industrial projects. PhD thesis, University of Cincinnati, USA.

Dester, W S and Blockley, D I (1995) Safety behaviour and culture in construction. Engineering, Construction and Architectural Management, 2(1), pp. 17-26. ISSN 0969-9988

Dewlaney, K S and Hallowell, M (2012) Prevention through design and construction safety management strategies for high performance sustainable building construction. Construction Management and Economics, 30(2), pp. 165-177. ISSN 1466433X

Di Maddaloni, F (2018) Stakeholder inclusiveness in megaprojects: Managing the locals for sustainable developments. PhD thesis, Kingston University, UK.

Di Ruocco, G; Melella, R and Marino, V (2022) An integrated assessment method for the sustainability of the opaque building envelope in residential buildings with Italian gbc-home certification. Architectural Engineering and Design Management, 18(4), pp. 545-570. ISSN 1745-2007

Diab, A A (2009) Risk management of building services modularisation: Knowledge management perspective. PhD thesis, University of Manchester, UK.

Dias, J L; Silva, A; Chai, C; Gaspar, P L and De Brito, J (2014) Neural networks applied to service life prediction of exterior painted surfaces. Building Research & Information, 42(3), pp. 371-380. ISSN 0961-3218

Dickson, R (2023) What's it going to take? Lessons learned from COVID-19 and worker mental health in the Australian construction industry. Construction Management and Economics, 41(9), pp. 758-780. ISSN 01446193

Ding, L.; Wang, T. and Chan, P. W. (2026) Digital platforms for circular construction: Incumbent supply chain actors' perceptions of emerging intermediaries in the Dutch context. Construction Management and Economics, 44(8), pp. 593-612. ISSN 0144-6193

Ding, G K C (2005) Developing a multicriteria approach for the measurement of sustainable performance. Building Research & Information, 33(1), pp. 3-16. ISSN 0961-3218

Ding, Grace K C (2004) The development of a multi-criteria approach for the measurement of sustainable performance for built projects and facilities. PhD thesis, University of Technology Sydney, Australia.

Ding, Z; Nie, W; Tam, V W Y and Illankoon, C (2025) Consumer purchase intention for extrinsic and intrinsic cues of construction and demolition waste recycled products. Engineering, Construction and Architectural Management, 32(6), pp. 3565-3586. ISSN 0969-9988

Dion, H; Evans, M and Farrell, P (2023) Hospitals management transformative initiatives; towards energy efficiency and environmental sustainability in healthcare facilities. Journal of Engineering, Design and Technology, 21(2), pp. 552-584. ISSN 1726-0531

Dissanayake, N; Xia, B; Skitmore, M; Trigunarsyah, B and Menadue, V (2023) Ranked generic criteria for EPC contractor selection. Engineering, Construction and Architectural Management, 30(10), pp. 4933-4954. ISSN 0969-9988

Dixon, W S (2014) Quantitative tool for measuring safety culture on busy construction sites in Great Britain. DProf thesis, University of Salford, UK.

Dizdaroglu, D; Yigitcanlar, T and Dawes, L (2012) A micro-level indexing model for assessing urban ecosystem sustainability. Smart and Sustainable Built Environment, 1(3), pp. 291-315. ISSN 2046-6099

Dlamini, M (2023) An entrepreneurial skills framework for the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Doan, D. T.; Albsoul, H.; Shobha, A. R.; GhaffarianHoseini, A. and Ghaffarianhoseini, A. (2026) An integrated challenge-strategy framework for construction waste management in New Zealand: Behavioural and organisational challenges and strategies. Engineering, Construction and Architectural Management, pp. 1-22. ISSN 0969-9988

Dobrucali, E; Demirkesen, S; Sadikoglu, E; Zhang, C and Damci, A (2024) Investigating the impact of emerging technologies on construction safety performance. Engineering, Construction and Architectural Management, 31(3), pp. 1322-1347. ISSN 0969-9988

Dobrucali, E; Sadikoglu, E; Demirkesen, S; Zhang, C; Tezel, A and Kiral, I A (2024) A bibliometric analysis of digital technologies use in construction health and safety. Engineering, Construction and Architectural Management, 31(8), pp. 3249-3282. ISSN 0969-9988

Doerstling, K W (2003) Building inspectors: Bureaucrats, professionals or heroes? PhD thesis, University of Southern California, USA.

Dolphin, W S Y; Alshami, A A M; Tariq, S; Boadu, V; Mohandes, S R; Ridwan, T and Zayed, T (2023) Effectiveness of policies and difficulties in improving safety performance of repair, maintenance, minor alteration, and addition works in Hong Kong. International Journal of Construction Management, 23(5), pp. 814-829. ISSN 1562-3599

Domdouzis, K (2007) Applications of wireless sensor technologies in construction. PhD thesis, Loughborough University, UK.

Domingos, L; Sousa, M J; Resende, R; Pizarro Miranda, B; Rego, S and Ferreira, R (2024) Establishment of a smart building assessment framework in the context of smart cities. Built Environment Project and Asset Management, 14(5), pp. 798-813. ISSN 2044-124X

Domínguez-Herrera, M M; González-Morales, O and González-Díaz, E (2023) Social responsibility of construction company as strategy for sustainability in island territories. Construction Economics and Building, 23(1-2), pp. 30-55. ISSN 2204-9029

Donato, Matteo (2016) The influence of resource dependency on collaboration in the construction supply chain. PhD thesis, Victoria University, Australia.

Dong, S.; Xu, S. and Zhang, Y. (2026) Understanding the factors influencing work-life conflict in construction practitioners: A meta-analysis study. International Journal of Building Pathology and Adaptation, 44(3), pp. 567-582. ISSN 2398-4708

Dong, H (2024) Impact of sensing and occupancy parameters to achieve comfort and demand side management in buildings. PhD thesis, Michigan State University, USA.

Dong, M H (1981) Assessment of Occupational Safety and Health Act of 1970: A case analysis of retrospective work injury data. DPA thesis, University of Southern California, USA.

Donkoh, D and Aboagye-Nimo, E (2017) Stakeholders' role in improving Ghana's construction safety. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(2), pp. 68-76. ISSN 17514304

Donn, M (2025) Simulation and the building performance gap. Buildings & Cities, 6(1), pp. 713-728. ISSN 2632-6655

Donohoe S, C J (2013) Enforceability of exemption clauses in construction contracts: A comparative study of approaches in England and Australia. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Dorji, K and Hadikusumo, B H W (2006) Safety management practices in the Bhutanese construction industry. Journal of Construction in Developing Countries, 11(2), pp. 53-75. ISSN 1823-6499

Dosumu, O and Aigbavboa, C O (2018) Adoption of light steel (LS) for building projects in South Africa. Journal of Engineering, Design and Technology, 16(5), pp. 711-733. ISSN 1726-0531

Downey, M (2014) Selection and adoption of low and zero carbon technologies in social housing: a socio-technical network approach. PhD thesis, University of Reading, UK.

Druker, J and Croucher, R (1999) Human resource management in European construction companies. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Du, J; Xue, Y; Sugumaran, V; Hu, M and Dong, P (2023) Improved biogeography-based optimization algorithm for lean production scheduling of prefabricated components. Engineering, Construction and Architectural Management, 30(4), pp. 1601-1635. ISSN 0969-9988

Du Plessis, C (1999) Sustainable development demands dialogue between developed and developing worlds. Building Research & Information, 27(6), pp. 379-389. ISSN 0961-3218

Du Plessis, C (2001) Sustainability and sustainable construction: The African context. Building Research & Information, 29(5), pp. 374-380. ISSN 0961-3218

Du Plessis, C (2005) Action for sustainability: Preparing an African plan for sustainable building and construction. Building Research & Information, 33(5), pp. 405-415. ISSN 0961-3218

Du Plessis, C (2012) Towards a regenerative paradigm for the built environment. Building Research & Information, 40(1), pp. 7-22. ISSN 0961-3218

Du Plessis, C and Cole, R J (2011) Motivating change: Shifting the paradigm. Building Research & Information, 39(5), pp. 436-449. ISSN 0961-3218

Dubey, K K (2001) A framework for analysing quality in the US homebuilding industry. PhD thesis, Swansea University, UK.

Duncan, J (2005) Performance-based building: Lessons from implementation in New Zealand. Building Research & Information, 33(2), pp. 120-127. ISSN 0961-3218

Duong, L N K; Wang, J X; Wood, L C; Reiners, T and Koushan, M (2021) The value of incremental environmental sustainability innovation in the construction industry: An event study. Construction Management and Economics, 39(5), pp. 398-418. ISSN 01446193

Durdyev, S; Koc, K; Karaca, F and Gurgun, A P (2023) Strategies for implementation of green roofs in developing countries. Engineering, Construction and Architectural Management, 30(6), pp. 2481-2502. ISSN 0969-9988

Durdyev, S and Mbachu, J (2011) On-site labour productivity of New Zealand construction industry: Key constraints and improvement measures. Construction Economics and Building, 11(3), pp. 18-33. ISSN 2204-9029

Dutta, A (2020) An in-depth investigation of the effects of work-related factors on the development of knee musculoskeletal disorders among construction roofers. PhD thesis, West Virginia University, USA.

Dyson, K; Matthews, J and Love, P E D (2016) Critical success factors of adapting heritage buildings: An exploratory study. Built Environment Project and Asset Management, 6(1), pp. 44-57. ISSN 2044-124X

Ebekozien, A (2022) Construction companies' compliance to personal protective equipment on junior staff in Nigeria: Issues and solutions. International Journal of Building Pathology and Adaptation, 40(4), pp. 481-498. ISSN 23984708

Ebekozien, A; Abdul-Aziz, A R and Jaafar, M (2022) Low-cost housing demand-supply gap: Government housing planners perspective on possible solutions. International Journal of Construction Management, 22(9), pp. 1736-1745. ISSN 1562-3599

Ebekozien, A; Aigbavboa, C; Ahmed, M A H; Thwala, W D; Samsurijan, M S; Aliu, J; Adekunle, S A; Akinradewo, O and Adoye, J (2025) Investigating personal protective equipment awareness of artisans in the informal sector: Issues and measures to improve achieving SDG 3. International Journal of Building Pathology and Adaptation, 43(8), pp. 59-74. ISSN 2398-4708

Ebekozien, A; Aigbavboa, C and Aigbedion, M (2023) Construction industry post-COVID-19 recovery: Stakeholders perspective on achieving sustainable development goals. International Journal of Construction Management, 23(8), pp. 1376-1386. ISSN 1562-3599

Ebekozien, A; Aigbavboa, C; Samsurijan, M S; Radin Firdaus, R B; Ayo-Odifiri, S O and Amadi, G C (2024) Disasters recovery and rehabilitation in informal settlements: The role of fourth industrial revolution technologies. International Journal of Construction Management, 24(11), pp. 1155-1165. ISSN 1562-3599

Ebekozien, A; Aigbavboa, C; Samsurijan, M S; Radin Firdaus, R B and Rohayati, M I (2024) Investigating safety violations on Nigerian construction sites. International Journal of Construction Management, 24(13), pp. 1454-1464. ISSN 1562-3599

Ebekozien, A; Aigbavboa, C; Thwala, W D; Samsurijan, M S; Hafez Ahmed, M A; Aliu, J and Adekunle, S (2025) Assessment of low-cost housing provision as government social responsibility towards achievement of sustainable development goal 11: stakeholders' perspective. International Journal of Construction Management, 25(7), pp. 802-812. ISSN 1562-3599

Eccles, T and Pointing, J (2013) Smart regulation, shifting architectures and changes in governance. International Journal of Law in the Built Environment, 5(1), pp. 71-88. ISSN 17561469

Ed Koehn, E; Kothari, R K and Pan, C S (1995) Safety in developing countries: Professional and bureaucratic problems. Journal of Construction Engineering and Management, 121(3), pp. 261-265. ISSN 0733-9364

Edirisinghe, R and Jadhav, A (2017) Is the smart safety vest a brutal innovation? Evaluation of microclimate performance using a thermal manikin. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Edirisinghe, R and Lingard, H (2016) Exploring the potential for the use of video to communicate safety information to construction workers: Case studies of organizational use. Construction Management and Economics, 34(6), pp. 366-376. ISSN 0144-6193

Edirisinghe, R; Lingard, H and Broadhurst, D (2015) Exploring the potential for using video to communicate safety information to construction workers: Case studies of organisational use. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Edirisinghe, R; Stranieri, A and Blismas, N (2016) Information visualisation for the wicked problem of safe construction design. Architectural Engineering and Design Management, 12(4), pp. 296-310. ISSN 1745-2007

Edwards, D J (2003) Accident trends involving construction plant: an exploratory analysis. Journal of Construction Research, 4(2), pp. 161-173. ISSN 1609-9451

Edwards, D J and Holt, G D (2005) Exposure to hand-arm vibration: Implications of new statutory requirements. Building Research & Information, 33(3), pp. 257-266. ISSN 0961-3218

Edwards, D J and Holt, G D (2006) Hand-arm vibration exposure from construction tools: Results of a field study. Construction Management and Economics, 24(2), pp. 209-217. ISSN 01446193

Edwards, D J and Holt, G D (2007) Construction hand tools: Vibration emissions from alternative inserts. Building Research & Information, 35(3), pp. 329-342. ISSN 0961-3218

Edwards, D J and Holt, G D (2008) Construction workers' health and safety knowledge: Initial observations on some test-result data. Journal of Engineering, Design and Technology, 6(1), pp. 65-80. ISSN 1726-0531

Edwards, D J and Holt, G D (2008) Health and safety issues relating to construction excavators and their attachments. Engineering, Construction and Architectural Management, 15(4), pp. 321-335. ISSN 0969-9988

Edwards, D J and Holt, G D (2009) New stability field tests for construction excavators. Engineering, Construction and Architectural Management, 16(4), pp. 337-352. ISSN 0969-9988

Edwards, D J and Holt, G D (2009) Construction plant and equipment management research: Thematic review. Journal of Engineering, Design and Technology, 7(2), pp. 186-206. ISSN 1726-0531

Edwards, D J and Holt, G D (2010) Cost-effective risk assessment of hand-arm vibration exposure. Journal of Financial Management of Property and Construction, 15(2), pp. 158-175. ISSN 1366-4387

Edwards, D J and Holt, G D (2011) Mini-excavator safety: Toward innovative stability testing, procurement, and manufacture. Journal of Construction Engineering and Management, 137(12), pp. 1125-1133. ISSN 0733-9364

Edwards, D J and Holt, G D (2014) Antecedents of health and safety issues relating to plant trailer wheels. Journal of Construction Engineering and Management, 140(7): 04014027, ISSN 0733-9364

Edwards, D J; Martek, I; Ejohwomu, O; Aigbavboa, C and Hosseini, M R (2021) Hand-arm vibration management: An operational health and safety strategy framework. International Journal of Building Pathology and Adaptation, 39(5), pp. 811-830. ISSN 23984708

Egbele-Okoro, K U (2020) Examining health and safety through the Lean thinking lens: the case of the Nigerian construction industry. PhD thesis, University of Huddersfield, UK.

Egbu, C O (1999) Skills, knowledge and competencies for managing construction refurbishment works. Construction Management and Economics, 17(1), pp. 29-43. ISSN 01446193

Eghbali-Zarch, M; Tavakkoli-Moghaddam, R; Dehghan-Sanej, K and Kaboli, A (2022) Prioritizing the effective strategies for construction and demolition waste management using fuzzy idocriw and waspas methods. Engineering, Construction and Architectural Management, 29(3), pp. 1109-1138. ISSN 0969-9988

Egwunatum, S I; Anumudu, A C; Eze, E C and Awodele, I A (2022) Total quality management (TQM) implementation in the Nigerian construction industry. Engineering, Construction and Architectural Management, 29(1), pp. 354-382. ISSN 0969-9988

Eid, M E M (2004) Rethinking relationships in the construction industry: integrating sustainable development into project management processes. PhD thesis, University of Edinburgh, UK.

Eisazadeh, N; De Troyer, F and Allacker, K (2025) Environmental performance of patient rooms using an integrated approach considering operational energy, daylight and comfort analysis. Smart and Sustainable Built Environment, 14(4), pp. 1117-1142. ISSN 2046-6099

Eisenberg, D A (2016) Transforming building regulatory systems to address climate change. Building Research & Information, 44(5-6), pp. 468-473. ISSN 0961-3218

Ejidike, C C; Mewomo, M C and Anugwo, I C (2024) Assessment of construction professionals' awareness of the smart building concepts in the Nigerian construction industry. Journal of Engineering, Design and Technology, 22(5), pp. 1491-1504. ISSN 1726-0531

Ejidike, C C; Mewomo, M C; Olawumi, T O; Wang, S and Buniya, M K (2025) Barriers to the adoption of smart building technology in developing countries: An empirical survey. Journal of Construction Engineering and Management, 151(6): 04025067, ISSN 0733-9364

Ekanayake, L L (2006) Interface conflicts and regulatory decision making process on power projects in Sri Lanka. PhD thesis, National University of Singapore, Singapore.

Ekundayo, D O (2020) Quantity surveying education and the benchmarking of future needs. PhD thesis, University of Salford, UK.

El Anwar, O H E D (2009) Multi-objective optimization for temporary housing arrangements after natural disasters. PhD thesis, University of Illinois at Urbana-Champaign, USA.

El Asmar, M; Hanna, A S and Loh, W Y (2016) Evaluating integrated project delivery using the project quarterback rating. Journal of Construction Engineering and Management, 142(1): 04015046, ISSN 0733-9364

El Korany, T. M.; Fouad, A. and Sanad, H. (2026) Identifying contractor selection criteria in Egyptian construction tenders: A SNA and PLS-SEM approach. Construction Innovation, 26(5), pp. 1356-1383. ISSN 1471-4175

El-Assaly, A E E-D (1997) Development of a statistical/mechanistic model to predict the consumption of nonrenewable materials in highway construction programs. PhD thesis, University of Florida, USA.

El-Diraby, T E and Wang, B (2005) Society portal: Integrating urban highway construction projects into the knowledge city. Journal of Construction Engineering and Management, 131(11), pp. 1196-1211. ISSN 0733-9364

El-Gohary, N (2008) Semantic process modelling and integration for collaborative construction and infrastructure development. PhD thesis, University of Toronto, Canada.

El-Rayes, K and Moselhi, O (1998) Resource-driven scheduling of repetitive activities. Construction Management and Economics, 16(4), pp. 433-446. ISSN 01446193

Elazhary, M and El-adaway, I H (2025) Enhancing management of transportation projects: Integration factors for using smart contracts. Journal of Construction Engineering and Management, 151(12): 04025201, ISSN 0733-9364

Elghaish, F; Matarneh, S T and Alhusban, M (2022) The application of "deep learning" in construction site management: Scientometric, thematic and critical analysis. Construction Innovation, 22(3), pp. 580-603. ISSN 1471-4175

Elias, I; Felix, H; David, P and David, O (2011) Improving construction health and safety: Application of cost-benefit analysis (CBA) for accident prevention. International Journal of Construction Management, 11(1), pp. 19-35. ISSN 1562-3599

Elkhatib, M M (1995) Developing an integrated highway information system for safety management using GIS. PhD thesis, Wayne State University, USA.

Elliot, C and Palmer, A (1996) Life cycle energy analysis of the building resource. Journal of Financial Management of Property and Construction, 1(2), pp. 5-16. ISSN 1366-4387

Elsebaei, M; Elnawawy, O; Othman, A A E and Badawy, M (2022) Causes and impacts of site accidents in the Egyptian construction industry. International Journal of Construction Management, 22(14), pp. 2659-2670. ISSN 1562-3599

Embi, M R (1997) An intelligent assistant for designing to fire regulations in Malaysia. PhD thesis, University of Sheffield, UK.

Embry, E (2023) Building change: A multi-level analysis of resilience through sustainability, health, and entrepreneurship in the built environment. PhD thesis, University of Colorado at Boulder, USA.

Emere, C E; Clinton, C; Thwala, W D and Akinradewo, O I (2025) A principal component analysis of sustainable building construction features for project delivery in South Africa. Journal of Engineering, Design and Technology, 23(5), pp. 1463-1482. ISSN 1726-0531

Emere, C E (2024) An integrated sustainable building construction model for project delivery in South Africa. PhD thesis, University of Johannesburg, South Africa.

Emmitt, S; Gorse, C A and Jones, S R (1999) The housing site manager: Changing roles and training needs. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Emsley, M (2005) A benefits analysis of partnering: A case study of a community primary school. Journal of Financial Management of Property and Construction, 10(1), pp. 69-79. ISSN 1366-4387

Emuze, F (2018) Foreseeing countermeasures for construction safety violations in South Africa. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Emuze, F (2019) Conceptual argument about drift into failure masked by work pressures on construction sites in South Africa. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Emuze, F (2021) Fortifying management control of health, safety and productivity loss in South African construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Emuze, F and Mollo, L (2019) Disrespecting people with working conditions in South Africa. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 112-117. ISSN 17514304

Emuze, F and Smallwood, J J (2012) Perspectives on health and safety in construction and design. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 27-34. ISSN 17514312

Emuze F, S J (2013) Construction motor vehicle accidents in South Africa: Causes and impact. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

English, J (2007) The development of women in the South African construction workforce in terms of employment, training and skills acquisition. PhD thesis, Glasgow Caledonian University, UK.

English, J; Haupt, T C and Smallwood, J J (2006) Women, construction and health and safety (H&S): South African and Tanzanian perspectives. Journal of Engineering, Design and Technology, 4(1), pp. 18-28. ISSN 1726-0531

Enshassi, A; Ayash, A and Mohamed, S (2018) Factors driving contractors to implement energy management strategies in construction projects. Journal of Financial Management of Property and Construction, 23(3), pp. 295-311. ISSN 1366-4387

Enshassi, A; El-Rayyes, Y and Alkilani, S (2015) Job stress, job burnout and safety performance in the Palestinian construction industry. Journal of Financial Management of Property and Construction, 20(2), pp. 170-187. ISSN 1366-4387

Enshassi, A; Mohamed, S and Modough, Z (2013) Contractors' selection criteria: Opinions of Palestinian construction professionals. International Journal of Construction Management, 13(1), pp. 19-37. ISSN 1562-3599

Eriksson, P E (2025) How clients choose procurement strategies and organizational control systems in the Swedish housing sector. Journal of Financial Management of Property and Construction, 30(1), pp. 22-41. ISSN 1366-4387

Eriksson, P E; Olander, S; Szentes, H and Widén, K (2014) Managing short-term efficiency and long-term development through industrialized construction. Construction Management and Economics, 32(1-2), pp. 97-108. ISSN 01446193

Erkan, I (2020) A system proposal for rapid detecting of anthropometric data and affecting design strategies. Journal of Engineering, Design and Technology, 18(6), pp. 1793-1822. ISSN 1726-0531

Ernest, K; Samuel, A S; Agyemang, D Y; Daniel, O and Caleb, D (2022) Identification of factors influencing the pricing of sustainable construction materials in developing countries: Views of Ghanaian quantity surveyors. International Journal of Construction Management, 22(11), pp. 2144-2153. ISSN 1562-3599

Ershadi, M; Jefferies, M; Davis, P and Mojtahedi, M (2021) Comparative analysis of PMO functions between the public and private sectors: Survey of high-performing construction organizations. Journal of Construction Engineering and Management, 147(11): 04021151, ISSN 0733-9364

Ershadi, M J; Edrisabadi, R and Shakouri, A (2020) Strategic alignment of project management with health, safety and environmental management. Built Environment Project and Asset Management, 10(1), pp. 78-93. ISSN 2044-124X

Esa, Mohd Reza (2018) Moving towards sustainable construction in Malaysia: A holistic model for construction and demolition (c&d) waste management. PhD thesis, University of Queensland, Australia.

Esezobor, E L (2016) Sustainability and construction: a study of the transition to sustainable construction practices in Nigeria. PhD thesis, Birmingham City University, UK.

Espinoza Vigil, A J and Booker, J D (2023) Building national disaster resilience: Assessment of enso-driven disasters in Peru. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 423-433. ISSN 1759-5916

Essa, R and Fortune, C (2008) Pre-construction evaluation practices of sustainable housing projects in the UK. Engineering, Construction and Architectural Management, 15(6), pp. 514-526. ISSN 0969-9988

Essa, R A (2008) A framework for the pre-construction evaluation of sustainable housing projects in the UK. PhD thesis, Heriot-Watt University, UK.

Evans, M (2022) Strategic frameworks for managing lean construction on megaprojects: towards global integrated delivery and corporate governance. PhD thesis, University of Bolton, UK.

Evans, M and Farrell, P (2023) A strategic framework managing challenges of integrating lean construction and integrated project delivery on construction megaprojects, towards global integrated delivery transformative initiatives in multinational organisations. Journal of Engineering, Design and Technology, 21(2), pp. 376-416. ISSN 1726-0531

Evans, M; Farrell, P; Elbeltagi, E and Dion, H (2023) Barriers to integrating lean construction and integrated project delivery (IPD) on construction megaprojects towards the global integrated delivery (gid) in multinational organisations: Lean IPD&gid transformative initiatives. Journal of Engineering, Design and Technology, 21(3), pp. 778-818. ISSN 1726-0531

Evans, M; Farrell, P; Zewein, W and Mashali, A (2021) Analysis framework for the interactions between building information modelling (BIM) and lean construction on construction mega-projects. Journal of Engineering, Design and Technology, 19(6), pp. 1451-1471. ISSN 1726-0531

Ewart, K and Silcock, G (1987) An analysis of the cost of compliance with the fire services order, Northern Ireland, 1985. Construction Management and Economics, 5(1), pp. 3-12. ISSN 01446193

Eze, E C; Sofolahan, O; Ugulu, R A and Ameyaw Effah, E E (2025) Bolstering circular economy in construction through digitalisation. Construction Innovation, 25(6), pp. 1774-1796. ISSN 1471-4175

Ezzeldine, O Y (1995) Design of tunnels constructed using pressurized shield methods. PhD thesis, University of Alberta, Canada.

Fagbenro, R. K.; Sunindijo, R. Y. and Illankoon, C. (2026) Prefabrication in construction: A pathway to improved mental health and well-being for workers. Engineering, Construction and Architectural Management, 33(15), pp. 249-275. ISSN 0969-9988

Fahmie, M M (1994) A knowledge-based expert system approach to analyze and evaluate highway construction schedules. PhD thesis, Florida University, USA.

Faith-Ell, C (2005) The application of environmental requirements in procurement of road maintenance in Sweden. PhD thesis, KTH Royal Institute of Technology, Sweden.

Falta, M and Gallery, N (2011) Unintended consequences of regulatory reporting requirements for small and medium size construction entities: Australian evidence. Construction Management and Economics, 29(11), pp. 1121-1135. ISSN 1466433X

Famakin, I O; Aigbavboa, C and Molusiwa, R (2023) Exploring challenges to implementing health and safety regulations in a developing economy. International Journal of Construction Management, 23(1), pp. 89-97. ISSN 1562-3599

Fan, C and Li, X (2025) Exploring effective incentive policies for sustainable development of green buildings in China: Based on evolutionary game theory and numerical simulation analysis. Engineering, Construction and Architectural Management, 32(5), pp. 3326-3348. ISSN 0969-9988

Fan, C; Li, X and Li, H (2024) Optimizing the regulation of commercial real estate presale deposits: The role of third-party regulation and the design of government incentives. Journal of Construction Engineering and Management, 150(10): 04024143, ISSN 0733-9364

Fang, D; Chen, Y and Wong, L (2006) Safety climate in construction industry: A case study in Hong Kong. Journal of Construction Engineering and Management, 132(6), pp. 573-584. ISSN 0733-9364

Fang, D; Wang, Y; Lim, H W; Ma, L; Gu, B and Huang, Y (2023) Construction of a Bayesian network based on leadership-culture-behavior model to improve owner safety management behavior. Journal of Construction Engineering and Management, 149(3): 04022177, ISSN 0733-9364

Farghaly, K; Collinge, W; Mosleh, M H; Manu, P and Cheung, C M (2022) Digital information technologies for prevention through design (ptd): A literature review and directions for future research. Construction Innovation, 22(4), pp. 1036-1058. ISSN 1471-4175

Faris, E; Matarneh, S; Talebi, S; Kagioglou, M; Hosseini, M R and Abrishami, S (2021) Toward digitalization in the construction industry with immersive and drones technologies: A critical literature review. Smart and Sustainable Built Environment, 10(3), pp. 345-363. ISSN 2046-6099

Farooqui, R U-H (2011) Achieving zero accidents: a strategic framework for continuous safety improvement in the construction industry. PhD thesis, Florida International University, USA.

Farouk, A M; Rahman, R A and Romali, N S (2023) Economic analysis of rehabilitation approaches for water distribution networks: Comparative study between Egypt and Malaysia. Journal of Engineering, Design and Technology, 21(1), pp. 130-149. ISSN 1726-0531

Farrell, P and Middlemass, R (2005) Barriers to disabled students in built environment degree programmes. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Fatayer, F A; Issa, A Z; Abunemeh, M and Dwikat, M A M (2022) Investigating the causes preventing the fulfillment of construction contract requirements. Engineering, Construction and Architectural Management, 29(7), pp. 2577-2598. ISSN 0969-9988

Fathalizadeh, A; Hosseini, M R; Vaezzadeh, S S; Edwards, D J; Martek, I and Shooshtarian, S (2022) Barriers to sustainable construction project management: The case of Iran. Smart and Sustainable Built Environment, 11(3), pp. 717-739. ISSN 2046-6099

Fathianpour, A; Babaeian Jelodar, M; Wilkinson, S and Evans, B (2023) Resilient evacuation infrastructure; an assessment of resilience toward natural hazards. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 536-552. ISSN 1759-5916

Faust, K M and Kaminsky, J A (2017) Building water and wastewater system resilience to disaster migration: Utility perspectives. Journal of Construction Engineering and Management, 143(8): 04017058, ISSN 0733-9364

Fauth, J; Nørkjær Gade, P; Kaiser, S; Raj, K; Goul Pedersen, J; Olsson, P O; Nisbet, N; Mastrolembo Ventura, S; Hirvensalo, A; Granja, J; Urban, H; Rutešić, S; Verstraeten, R; Raitviir, C R; Kallinen, A R; Schranz, C; Stojanov, T and Tekavec, J (2025) Investigating building permit processes across Europe: Characteristics and patterns. Building Research & Information, 53(4), pp. 417-434. ISSN 0961-3218

Favie, R (2010) Quality monitoring in infrastructural design-build projects: the analysis of an audit-based monitoring system. PhD thesis, Eindhoven University of Technology, Netherlands.

Feldmann, F G (2022) Novel perspectives on sustainable value creation: Challenging the status quo by implementing advanced technologies into supply chain processes. PhD thesis, Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Germany.

Feng, L; Liu, J; Wang, Z and Hong, Y (2025) Navigating compliance complexity: Insights from the moa framework in international construction. Engineering, Construction and Architectural Management, 32(9), pp. 6068-6094. ISSN 0969-9988

Feng, Y (2011) Optimizing safety investments for building projects in Singapore. PhD thesis, National University of Singapore, Singapore.

Feng, Y (2015) Mathematical models for determining the minimum level of voluntary safety investments for building projects. Journal of Construction Engineering and Management, 141(7): 4015015, ISSN 0733-9364

Feng, Y and Trinh, M T (2019) Developing resilient safety culture for construction projects. Journal of Construction Engineering and Management, 145(11), ISSN 0733-9364

Feng, Z; Lovreglio, R; Yiu, T W; Acosta, D M; Sun, B and Li, N (2024) Immersive virtual reality training for excavation safety and hazard identification. Smart and Sustainable Built Environment, 13(4), pp. 883-907. ISSN 2046-6099

Fenn, J E; Hutchings, D M and Burr, K L (2008) The purposes for state residential general contractor licensing in the United States. International Journal of Construction Education and Research, 4(2), pp. 67-81. ISSN 1557-8771

Fernando, N G; Amaratunga, D and Haigh, R (2014) The career advancement of the professional women in the UK construction industry: The career success factors. Journal of Engineering, Design and Technology, 12(1), pp. 53-70. ISSN 1726-0531

Fernández, A I; Jarufe, J; Segarra, P and Cavieres, P (2025) Management of construction planning process in massive underground mining by integrating LPS and cit through action research. Journal of Construction Engineering and Management, 151(5): 04025024, ISSN 0733-9364

Ferreira, F; Briga, P; Ramos Teixeira, S and Almeida, F (2025) A platform sandbox for the assessment of municipal sustainable development goals. Journal of Engineering, Design and Technology, 23(2), pp. 599-617. ISSN 1726-0531

Fieldson, R (2007) Towards a framework for sustainability in UK retail architecture. PhD thesis, University of Newcastle upon Tyne, UK.

Fieldson, R (2017) The afterlife clause; towards a strategy for improved adaptation in retail property. International Journal of Building Pathology and Adaptation, 35(4), pp. 364-379.

Finegan, E; Kelly, G and O’Sullivan, G (2020) Comparative analysis of passivhaus simulated and measured overheating frequency in a typical dwelling in Ireland. Building Research & Information, 48(6), pp. 681-699. ISSN 0961-3218

Finnie, D; Ali, N A and Park, K (2018) Enhancing off-site manufacturing through early contractor involvement (ECI) in New Zealand. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(4), pp. 176-185. ISSN 17514304

Fiona, T S C (2009) A critical study on performance-based fire safety design in Hong Kong with timber perforated ceilings as an example. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Fiorani, Viviane Miranda Araujo (2016) Building sites environmental compensations in urban areas: Focusing the anthropic environment. PhD thesis, Universidade de São Paulo, Brazil.

Firouzi, A and Vahdatmanesh, M (2019) Applicability of financial derivatives for hedging material price risk in highway construction. Journal of Construction Engineering and Management, 145(5): 04019023, ISSN 0733-9364

Fischer, J (2010) Translating zero carbon into building design regulation, theories and practices. PhD thesis, University of Manchester, UK.

Flett, P (2001) The role of quality in the management of projects. PhD thesis, University of Stirling, UK.

Florez, L; Castro, D and Irizarry, J (2013) Measuring sustainability perceptions of construction materials. Construction Innovation, 13(2), pp. 217-234. ISSN 1471-4175

Flory, J P (2025) The value of using prequalification scores for assessing contractor safety climate at chemical manufacturing sites. PhD thesis, Indiana University of Pennsylvania, USA.

Flynn, M A and Sampson, J M (2012) Trench safety-using a qualitative approach to understand barriers and develop strategies to improve trenching practices. International Journal of Construction Education and Research, 8(1), pp. 63-79. ISSN 1557-8771

Fobiri, G; Musonda, I and Muleya, F (2025) Unlocking the full potential of reality capture for construction project cost monitoring: A mixed review. Journal of Engineering, Design and Technology, 23(3), pp. 830-853. ISSN 1726-0531

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 1). International Journal of Law in the Built Environment, 6(1-2), pp. 43-68. ISSN 1756-1450

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 2). International Journal of Law in the Built Environment, 6(1-2), pp. 129-151. ISSN 1756-1450

Fore, S and Mbohwa, C T (2010) Cleaner production for environmental conscious manufacturing in the foundry industry. Journal of Engineering, Design and Technology, 8(3), pp. 314-333. ISSN 1726-0531

Forman, M (2010) Lean construction and health and safety on site: Analysed in a planning and empowerment perspective. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Forman, M (2013) Inertia and change: Lean construction and health and safety work on construction sites. Construction Management and Economics, 31(6), pp. 647-660. ISSN 1466433X

Forster, A M; Carter, K; Banfill, P F G and Kayan, B (2011) Green maintenance for historic masonry buildings: An emerging concept. Building Research & Information, 39(6), pp. 654-664. ISSN 0961-3218

Foster, S R (2020) Management strategies for improving construction industry ethics. PhD thesis, Walden University, USA.

Francart, N (2021) Decision support for the implementation of low-carbon measures in the building sector. PhD thesis, KTH Royal Institute of Technology, Sweden.

Francis, A (2017) Simulating uncertainties in construction projects with chronographical scheduling logic. Journal of Construction Engineering and Management, 143(1): 04016085, ISSN 0733-9364

Francis, A and Thomas, A (2022) A machine learning-based life cycle assessment prediction model for the environmental impacts of buildings. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Francis, Annes Elsa (2025) Transforming stadiums into environmentally sustainable community infrastructure: A holistic perspective. PhD thesis, Griffith University, Australia.

Franklin, M; Walsh, M; Clarke, N; Spillane, J P and Bradley, J G (2022) Mental health in construction: The awareness of the impact of stress on construction professionals' mental health in Ireland and the UK. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Fredriksson, A; Janné, M and Peltokorpi, A (2024) Making logistics a central core in complex construction projects: a power-dependency analysis. Construction Management and Economics, 42(11-12), pp. 963-976. ISSN 01446193

Fredslund, L M; Gottlieb, S C and Leiringer, R (2019) Understanding supply chain integration as recoupling. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Freitas, Andrey Pimentel Aleluia (2018) Risk management methodology in the civil construction industry: Application in micro and small enterprises. PhD thesis, Universidade Federal Fluminense, Brazil.

Freitas, Oracilda Aparecida de (2023) Corporate sustainability in construction and its socio-spatial implications: The example of MRV Engenharia in Uberlândia/MG. PhD thesis, Universidade Federal de Uberlândia, Brazil.

Frempong-Jnr, E Y; Ametepey, S O and Cobbina, J E (2023) Impact of stakeholder management on efficient construction waste management. Smart and Sustainable Built Environment, 12(3), pp. 607-634. ISSN 2046-6099

French, T R (2012) Evolutionary optimisation of network flow plans for emergency movement in the built environment. PhD thesis, University of Edinburgh, UK.

Fuertes, A and Khatabakhshrad, M (2024) Health and safety risk management in a changing climate: Contrasting supervisors and workers perceptions and approaches to heat coping strategies on construction sites. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Fung, I W H and Tam, V W Y (2013) Occupational health and safety of older construction workers (aged 55 or above): Their difficulties, needs, behaviour and suitability. International Journal of Construction Management, 13(3), pp. 15-34. ISSN 1562-3599

Fung, I W H and Tam, V W Y (2013) Development of an empirical model for selecting accident prevention measures for construction managers. International Journal of Construction Management, 13(1), pp. 39-51. ISSN 1562-3599

Fung, I W H; Tam, V W Y; Sing, C P; Tang, K K W and Ogunlana, S O (2016) Psychological climate in occupational safety and health: The safety awareness of construction workers in South China. International Journal of Construction Management, 16(4), pp. 315-325. ISSN 1562-3599

Furber, A; Crapper, M; Gillie, M; Stratford, T; Bisby, L; Blackford, J and White, D (2014) Innovative learning at the University of Edinburgh. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(1), pp. 13-24. ISSN 17514304

Furber, A; Duncan, S; Smith, S D and Crapper, M (2012) The health and safety implications of socio-cultural context for community construction projects in developing countries. Construction Management and Economics, 30(10), pp. 857-867. ISSN 1466433X

Furber, A M (2013) Social and cultural context of rural water and sanitation projects: Case studies from Ghana. PhD thesis, University of Edinburgh, UK.

Furci, J and Sunindijo, R Y (2020) Impacts of the whs act 2011 on safety management in small and medium construction companies. International Journal of Construction Management, 20(3), pp. 196-206. ISSN 1562-3599

Gade, A N; Larsen, T S and Selman, A D (2021) Leaving no one behind: A glimpse into the state of adoption of the Sustainable Development Goals in the Danish construction industry. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Gade, R (2022) Achieving sustainable construction through construction & demolition waste minimisation in residential building projects. PhD thesis, Auckland University of Technology, New Zealand.

Gama, E C M and Sloan, S C W B (2010) Environmental sustainability in the construction industry in developing countries: A study of embodied energy of low-cost housing. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gambatese, J A; Behm, M and Hinze, J W (2005) Viability of designing for construction worker safety. Journal of Construction Engineering and Management, 131(9), pp. 1029-1036. ISSN 0733-9364

Gambo, N and Musonda, I (2021) Effect of the fourth industrial revolution on road transport asset management practice in Nigeria. Journal of Construction in Developing Countries, 26(1), pp. 19-43. ISSN 1823-6499

Gambo, N; Said, I and Ismail, R (2016) Influences of cost factors affecting technical performance of local government projects in Nigeria: A partial least square-structural equation modeling approach. Journal of Construction in Developing Countries, 21(1), pp. 85-111. ISSN 1823-6499

Gambo, N; Said, I and Ismail, R (2016) Comparing the levels of performance of small scale local government contractors in Northern Nigeria with international practice. Engineering, Construction and Architectural Management, 23(5), pp. 588-609. ISSN 0969-9988

Gambo, N; Said, I and Ismail, R (2017) Mediation model for improving cost factors that affect performance of small-scale building construction contract business in Nigeria: A PLS-SEM approach. International Journal of Construction Education and Research, 13(1), pp. 24-46. ISSN 1557-8771

Gamil, Y and Abdul Rahman, I (2019) Awareness and challenges of building information modelling (BIM) implementation in the Yemen construction industry. Journal of Engineering, Design and Technology, 17(5), pp. 1077-1084. ISSN 1726-0531

Gan, X; Jia, J; Le, Y; Liu, T and Xue, Y (2025) Mitigating the aftermath of relationship conflict between the owners and contractors: A contract enforcement approach. Engineering, Construction and Architectural Management, 32(8), pp. 4949-4968. ISSN 0969-9988

Gan, V J L (2022) BIM-based building geometric modeling and automatic generative design for sustainable offsite construction. Journal of Construction Engineering and Management, 148(10): 04022111, ISSN 0733-9364

Gana, V F G; Giridharan, R and Watkins, R (2018) Application of soft landings in the design management process of a non-residential building. Architectural Engineering and Design Management, 14(3), pp. 178-193. ISSN 1745-2007

Gangolells, M; Casals, M; Forcada, N; Fuertes, A and Roca, X (2013) Model for enhancing integrated identification, assessment, and operational control of on-site environmental impacts and health and safety risks in construction firms. Journal of Construction Engineering and Management, 139(2), pp. 138-147. ISSN 0733-9364

Gao, H; Zhang, L and Gu, S (2026) Carbon emission efficiency measurement of construction enterprises based on the three-stage DEA-sbm model. Journal of Construction Engineering and Management, 152(4): 04026028, ISSN 0733-9364

Gao, H; Zhong, B; Luo, H and Chen, W (2022) Computational geometric approach for BIM semantic enrichment to support automated underground garage compliance checking. Journal of Construction Engineering and Management, 148(1): 05021013, ISSN 0733-9364

Gao, Q; Liu, B; Sun, J; Liu, C and Xu, Y (2022) Trade decomposition of CO2 emissions of global construction industries. Engineering, Construction and Architectural Management, 29(1), pp. 502-522. ISSN 0969-9988

Gao, R; Chan, A P C; Utama, W P and Zahoor, H (2017) Workers' perceptions of safety climate in international construction projects: Effects of nationality, religious belief, and employment mode. Journal of Construction Engineering and Management, 143(4): 04016117, ISSN 0733-9364

Garakani, S A; Lak, A and Niyasati, M (2020) Toward sustainable development in post-flood relocation of rural settlements in Iran. International Journal of Disaster Resilience in the Built Environment, 11(3), pp. 359-377. ISSN 1759-5916

Garg, Arun (2022) Quantifying resilient safety culture using complex network theory. PhD thesis, Griffith University, Australia.

Gaur, S and Tawalare, A (2024) Assessing the implications of BIM on sustainability of construction projects through design risk management. Built Environment Project and Asset Management, 14(3), pp. 470-489. ISSN 2044-124X

Gavieta, R C and Onate, C E (1997) Building regulations and disaster mitigation: The Philippines. Building Research & Information, 25(2), pp. 120-123. ISSN 0961-3218

Gavilan, R M and Bernold, L E (1994) Source evaluation of solid waste in building construction. Journal of Construction Engineering and Management, 120(3), pp. 536-552. ISSN 0733-9364

Geminiani, F L; Smallwood, J J and van Wyk, J J (2008) The effectiveness of the occupational health and safety (OH&S) inspectorate in South African construction. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

George, M and Loosemore, M (2019) Site operatives' attitudes towards traditional masculinity ideology in the Australian construction industry. Construction Management and Economics, 37(8), pp. 419-432. ISSN 01446193

Gerges, M (2020) Building information modelling for fire evacuation in high-rise residential buildings. PhD thesis, Loughborough University, UK.

Gerges, M; Mayouf, M; Rumley, P and Moore, D (2017) Human behaviour under fire situations in high-rise residential building. International Journal of Building Pathology and Adaptation, 35(1), pp. 90-106.

Getuli, V; Capone, P and Bruttini, A (2021) Planning, management and administration of hs contents with BIM and VR in construction: An implementation protocol. Engineering, Construction and Architectural Management, 28(2), pp. 603-623. ISSN 0969-9988

Getuli, V; Capone, P; Bruttini, A and Sorbi, T (2022) A smart objects library for BIM-based construction site and emergency management to support mobile VR safety training experiences. Construction Innovation, 22(3), pp. 504-530. ISSN 1471-4175

Getvoldsen, K S; Chandragiri, A K; Khalafallah, A M; Belizaire, M; Weirs, J; Raheem, H M J; Gerges, M and Butt, T E (2024) Sustainability’s three principal dimensions versus Climate Change Act 2008: A retrospective numerical modelling. Construction Economics and Building, 24(3), pp. 5-22. ISSN 2204-9029

Ghadiminia, N (2021) Integration of cybersecurity in BIM-enabled facilities management organisations. PhD thesis, Birmingham City University, UK.

Ghaeli, M R (1998) Pavement and bridge cost allocation analysis of the Intario intercity highway network. PhD thesis, University of Waterloo, USA.

GhaffarianHoseini, A; Tookey, J; GhaffarianHoseini, A; Naismith, N and Rotimi, J O B (2016) Integrating alternative technologies to improve built environment sustainability in Africa: Nexus of energy and water. Smart and Sustainable Built Environment, 5(3), pp. 193-211. ISSN 2046-6099

Ghansah, F A; De-Graft, O-M and Ayarkwa, J (2021) Project management processes in the adoption of smart building technologies: A systematic review of constraints. Smart and Sustainable Built Environment, 10(2), pp. 208-226. ISSN 2046-6099

Ghansah, F A and Lu, W (2025) Managerial framework for quality assurance of cross-border construction logistics and supply chain during pandemic and post-pandemic: Lessons from COVID-19 in the world’s factory. Engineering, Construction and Architectural Management, 32(5), pp. 3007-3056. ISSN 0969-9988

Gharaibeh, L; Eriksson, K and Lantz, B (2025) Quantifying BIM investment value: A systematic review. Journal of Engineering, Design and Technology, 23(5), pp. 1384-1403. ISSN 1726-0531

Gharehbaghi, K; McManus, K and Robson, K (2019) Minimizing the environmental impacts of mega infrastructure projects: Australian public transport perspective. Journal of Engineering, Design and Technology, 17(4), pp. 736-746. ISSN 1726-0531

Ghoddousi, P; Nasirzadeh, F and Hashemi, H (2018) Evaluating highway construction projects' sustainability using a multicriteria group decision-making model based on bootstrap simulation. Journal of Construction Engineering and Management, 144(9): 04018092, ISSN 0733-9364

Gholami, E (2017) Exploiting BIM in energy efficient domestic retrofit: evaluation of benefits and barriers. PhD thesis, University of Liverpool, UK.

Gholami Rostam, Mehdi (2024) Energy efficiency assessment in building designs integrating climate resilience and long-term environmental sustainability. PhD thesis, University of New South Wales, Australia.

Ghorai, S (2017) Accelerated construction of roadways: Life cycle assessment and environmental impacts. PhD thesis, Syracuse University, USA.

Ghorbany, S; Yousefi, S and Noorzai, E (2024) Evaluating and optimizing performance of public-private partnership projects using copula Bayesian network. Engineering, Construction and Architectural Management, 31(1), pp. 290-323. ISSN 0969-9988

Ghosh, B. and Karmakar, S. (2026) Development and application of a digitalised construction safety document management system for advanced constructions using building information modeling. International Journal of Construction Management, 26(8), pp. 1490-1507. ISSN 1562-3599

Ghosh, B and Karmakar, S (2025) Development and application of a digitalized construction quality document management system for advanced construction using building information modeling. Journal of Construction Engineering and Management, 151(6): 04025053, ISSN 0733-9364

Ghosh, S; Nourihamedani, M; Reyes, M and Snyder, L (2024) Association between leading indicators of safety performance in construction projects. International Journal of Construction Education and Research, 20(2), pp. 121-135. ISSN 15578771

Ghostin, M (2020) Exploring an implementation framework for building information modelling to support sustainable development in the Lebanese construction industry: a qualitative approach. PhD thesis, Coventry University, UK.

Ghumra, S (2012) Developing a sustainability assessment framework for ready-mixed concrete. EngD thesis, Loughborough University, UK.

Ghumra, S; Glass, J; Frost, M W; Watkins, M and Mundy, J (2011) Validating a set of empirically weighted sustainability indicators for construction products. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Ghumra, S; Watkins, M; Phillips, P; Glass, J; Frost, M W and Anderson, J (2009) Developing a LCA-based tool for infrastructure projects. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Gibb, A G F and Isack, F (2003) Re-engineering through pre-assembly: Client expectations and drivers. Building Research & Information, 31(2), pp. 146-160. ISSN 0961-3218

Gilbert, A (2015) Sustainable development and greenspace in housebuilding: rules, roles and responsibilities. PhD thesis, University of Manchester, UK.

Gilham, A (2010) A governance framework for sustainable development in the built environment. PhD thesis, De Montfort University, UK.

Gilkey, D P (2002) Occupational low back pain in residential carpenters: Ergonomic elements of posture and strain. PhD thesis, Colorado State University, USA.

Gilkey, D P; Del Puerto, C L; Keefe, T; Bigelow, P; Herron, R; Rosecrance, J and Chen, P (2012) Comparative analysis of safety culture perceptions among homesafe managers and workers in residential construction. Journal of Construction Engineering and Management, 138(9), pp. 1044-1052. ISSN 0733-9364

Gillen, M E (1996) Nonfatal falls in construction workers: Predictors of injury severity. PhD thesis, University of California, San Francisco, USA.

Gilmour, D; Blackwood, D; Falconer, R and Isaacs, J (2010) Understanding decisions for sustainable development. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gilmour, D; Blackwood, D; Falconer, R; Isaacs, J and Simpson, E (2015) The role of sustainability assessment in sustainability management for urban redevelopment. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Gilmour D, B D F R I J T A (2013) A knowledge map of sustainability for urban redevelopment projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gines, J A (2024) Mass timber utilization in architecture: Carbon sequestration, building materials and construction practices. PhD thesis, Mississippi State University, USA.

Ginige, K N (2014) Mainstreaming women in disaster risk reduction in the built environment. PhD thesis, University of Salford, UK.

Giri, O P; Sainju, P R and Htet, A (2025) Evaluating occupational health and safety practices in an airport construction project in Nepal. Built Environment Project and Asset Management, 15(1), pp. 149-164. ISSN 2044-124X

Glass, J and Dainty, A R J (2011) The sustainable construction business: A missing ingredient in creating a sustainable built environment? International Journal of Construction Management, 11(2), pp. 1-18. ISSN 1562-3599

Glass, J and Simmonds, M (2007) "Considerate construction": Case studies of current practice. Engineering, Construction and Architectural Management, 14(2), pp. 131-149. ISSN 0969-9988

Glaumann, M; Malm, T and Larsson, J (1999) Evaluation of green buildings in Sweden. Building Research & Information, 27(4-5), pp. 276-285. ISSN 0961-3218

Glew, D; Smith, M B; Miles-Shenton, D and Gorse, C (2017) Assessing the quality of retrofits in solid wall dwellings. International Journal of Building Pathology and Adaptation, 35(5), pp. 501-518.

Glick, S; Shuler, S and Guggemos, A A (2013) Life cycle analysis for sustainable development: A case study of parking lot pavements. International Journal of Construction Education and Research, 9(3), pp. 226-236. ISSN 1557-8771

Glover, R W (1972) Developing and upgrading minority construction contractors: The Houston and Atlanta experiences. PhD thesis, University of Texas at Austin, USA.

Gluch, P (2005) Building green: perspectives on environmental mangagement in construction. PhD thesis, Chalmers University of Technology, Sweden.

Gluch, P and Bosch-Sijtsema, P (2016) Conceptualizing environmental expertise through the lens of institutional work. Construction Management and Economics, 34(7-8), pp. 522-535. ISSN 01446193

Gluch, P; Gustafsson, M and Thuvander, L (2009) An absorptive capacity model for green innovation and performance in the construction industry. Construction Management and Economics, 27(5), pp. 451-464. ISSN 1466433X

Gluch, P and Hellsvik, S (2023) The influence of multiple logics on the work of sustainability professionals. Construction Management and Economics, 41(11-12), pp. 893-909. ISSN 01446193

Gluch, P and Räisänen, C (2009) Aligning the practices of the permanent with those of the temporary. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Goel, A; Ganesh, L S and Kaur, A (2021) Sustainability assessment of construction practices in India using inductive content analysis of research literature. International Journal of Construction Management, 21(8), pp. 802-817. ISSN 1562-3599

Gogo, S E (2021) The role of leadership in the transformation of health and safety culture in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Goh, B H (2016) Designing a whole-life building cost index in Singapore. Built Environment Project and Asset Management, 6(2), pp. 159-173. ISSN 2044-124X

Goh, C S (2014) Development of a capability maturity model for sustainable construction. PhD thesis, University of Hong Kong, Hong Kong.

Goh, Y M and Chua, D K H (2010) Case-based reasoning approach to construction safety hazard identification: Adaptation and utilization. Journal of Construction Engineering and Management, 136(2), pp. 170-178. ISSN 0733-9364

Goh C S, R S (2013) The roles of sustainability assessment systems in delivering sustainable construction. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Gokarakonda, S; Shrestha, S; Caleb, P R; Rathi, V; Jain, R; Thomas, S; Topp, K and Niazi, Z (2019) Decoupling in India's building construction sector: Trends, technologies and policies. Building Research & Information, 47(1), pp. 91-107. ISSN 0961-3218

Golden, S K (2008) Immigration and construction: An analysis of the impact of immigration on construction project costs. PhD thesis, University of Maryland, College Park, USA.

Goldsmith, W and Flanagan, T (2017) Value methodology: case studies within climate resilience and sustainability policy application. Architectural Engineering and Design Management, 13(1), pp. 3-21. ISSN 1745-2007

Golizadeh, Hamed (2019) Adoption of building information modelling innovations to reduce occupational fatalities in the Australian construction industry. PhD thesis, Queensland University of Technology, Australia.

Gomes, V and Da Silva, M G (2005) Exploring sustainable construction: Implications from Latin America. Building Research & Information, 33(5), pp. 428-440. ISSN 0961-3218

Goncalves, Andriani Tavares Tenorio (2019) Integrated solid waste management index for decision support in municipalities. PhD thesis, Universidade Federal de Itajubá, Brazil.

Goncalves, V L; Costanzo, V; Fabbri, K and Rakha, T (2022) Overheating assessment in Passivhaus dwellings: The influence of prediction tools. Buildings & Cities, 3(1), pp. 153-167. ISSN 2632-6655

Goodfellow-Smith, M (2019) How can finance and insurance institutions help deliver sustainable city infrastructure? PhD thesis, University of Birmingham, UK.

Goodrum, P M and Dai, J (2005) Differences in occupational injuries, illnesses, and fatalities among Hispanic and non-Hispanic construction workers. Journal of Construction Engineering and Management, 131(9), pp. 1021-1028. ISSN 0733-9364

Goubran, S; Masson, T and Walker, T (2020) Diagnosing the local suitability of high-rise timber construction. Building Research & Information, 48(1), pp. 101-123. ISSN 0961-3218

Goulden, S; Erell, E; Garb, Y and Pearlmutter, D (2017) Green building standards as socio-technical actors in municipal environmental policy. Building Research & Information, 45(4), pp. 414-425. ISSN 0961-3218

Gowri, K and Depanni, S (1998) The health and safety expert system (HASES): An expert system framework for building inspections. Engineering, Construction and Architectural Management, 5(1), pp. 92-101. ISSN 0969-9988

Goyal, S and Routroy, S (2023) Analyzing environmental sustainability enablers for an Indian steel manufacturing supply chain. Journal of Engineering, Design and Technology, 21(1), pp. 1-22. ISSN 1726-0531

Goyal, S; Routroy, S and Singhal, A (2019) Analyzing environment sustainability enablers using fuzzy DEMATEL for an Indian steel manufacturing company. Journal of Engineering, Design and Technology, 17(2), pp. 300-329. ISSN 1726-0531

Graafland, J and Nijhof, A (2007) Transparency, market operation and trust in the Dutch construction industry: An exploratory study. Construction Management and Economics, 25(2), pp. 195-205. ISSN 1466433X

Grafström, J and Rydén, S (2026) A transition probability analysis of material flows in the European aggregates industry. Construction Management and Economics, 44(3), pp. 200-213. ISSN 0144-6193

Graham, P M and Walker, D H T (2000) First steps towards acheiving environmental sustainability for developed projects: An holistic life-cycle procurement objective. Journal of Construction Procurement, 6(1), pp. 67-84. ISSN 1358-9180

Grant, A and Hinze, J (2013) Underlying causal factors associated with construction worker fatalities involving stepladders. Construction Economics and Building, 13(1), pp. 13-22. ISSN 2204-9029

Grant, A and Ries, R (2013) Impact of building service life models on life cycle assessment. Building Research & Information, 41(2), pp. 168-186. ISSN 0961-3218

Grant, E J (2020) Mainstreaming environmental education for architects: The need for basic literacies. Buildings & Cities, 1(1), pp. 538-549. ISSN 2632-6655

Greed, C and Reeves, D (2005) Mainstreaming equality into strategic spatial policy making: Are town planners losing sight of gender? Construction Management and Economics, 23(10), pp. 1059-1070. ISSN 01446193

Green, S D (2022) Modern methods of construction: Reflections on the current research agenda. Buildings & Cities, 3(1), pp. 653-662. ISSN 2632-6655

Green, S D; Harty, C; Elmualim, A A; Larsen, G D and Kao, C C (2008) On the discourse of construction competitiveness. Building Research & Information, 36(5), pp. 426-435. ISSN 0961-3218

Greer, Fiona Muriel (2021) Life-cycle environmental and economic management of airport infrastructure and operations. PhD thesis, University of California, USA.

Griffith, A (2000) Integrated management systems: A single management system solution for project control? Engineering, Construction and Architectural Management, 7(3), pp. 232-240. ISSN 0969-9988

Griffith, A (2011) Fulfilling contractors' corporate social responsibilities using standards-based management systems. International Journal of Construction Management, 11(2), pp. 37-47. ISSN 1562-3599

Griffith, A and Bhutto, K (2008) Contractors' experiences of integrated management systems. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(3), pp. 93-98. ISSN 17514312

Griffith, A and Phillips, N (2001) The influence of the construction (design and management) regulations 1994 upon the procurement and management of small building works. Construction Management and Economics, 19(5), pp. 533-540. ISSN 01446193

Grill, M; Nielsen, K; Grytnes, R; Pousette, A and Törner, M (2019) The leadership practices of construction site managers and their influence on occupational safety: An observational study of transformational and passive/avoidant leadership. Construction Management and Economics, 37(5), pp. 278-293. ISSN 01446193

Grob, H L (1998) Self-regulation and safety programs in construction. PhD thesis, University of Notre Dame, USA.

Grytnes, R; Tutt, D E and Andersen, L P S (2020) Developing safety cooperation in construction: Between facilitating independence and tightening the grip. Construction Management and Economics, 38(11), pp. 977-992. ISSN 01446193

Gschösser, F (2011) Environmental assessment of road constructions: Life cycle assessment of Swiss road pavements and an accompanying analysis of construction and maintenance costs. DSc thesis, ETH Zürich, Switzerland.

Gu, Y (2011) The impacts of real-time knowledge based personal lighting control on energy consumption, user satisfaction and task performance in offices. PhD thesis, Carnegie Mellon University, USA.

Guan, Z; Samarasinghe, D A S; Yiu, T W; Reddy, R and Laird, I (2026) Examining the risk factors influencing safety outcomes for Chinese migrant construction workers in New Zealand. Engineering, Construction and Architectural Management, 33(15), pp. 182-202. ISSN 0969-9988

Guan, Z; Millard, S and Yang, Z (2008) CDIO and the Liverpool Constructionarium. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(2), pp. 77-83. ISSN 17514312

Guan, Z; Yiu, T W; Samarasinghe, D A S and Reddy, R (2024) Health and safety risk of migrant construction workers–a systematic literature review. Engineering, Construction and Architectural Management, 31(3), pp. 1081-1099. ISSN 0969-9988

Guanyu, W; Xiaoxia, L and Gab-Soo, H (2025) Research on the protection of and renewal strategies for historic buildings in the ancient city of liaocheng based on multisource data. Architectural Engineering and Design Management, 21(1), pp. 120-135. ISSN 1745-2007

Guirguis, T (2025) Potty politics: The biopolitical and bioeconomic implications of sanitation infrastructure mega-projects in Cairo, Mumbai, and Shanghai. PhD thesis, University of California, Santa Barbara, USA.

Gullette, G; Thebpanya, P and Singto, S (2022) Socioeconomic and livelihood impacts within Bangkok's expanding metropolitan region. Buildings & Cities, 3(1), pp. 808-823. ISSN 2632-6655

Gunarathna, C; Yang, R J; Jayasuriya, S; Yi, X; Arashpour, M; Ning, X and Heng, X (2026) Design and development of blockchain-enabled information management system for building integrated photovoltaic projects. Engineering, Construction and Architectural Management, 33(15), pp. 72-114. ISSN 0969-9988

Gunatilake, S (2013) The uptake and implementation of sustainable construction: transforming policy into practice. PhD thesis, University of Central Lancashire, UK.

Gunatilake, S and Liyanage, C (2010) Harmonizing sustainable construction policy with practice at project level: A research proposition. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gunduz, M; Naji, K and Maki, O (2025) A framework for evaluating campus facility management performance in light of project critical success factors using a multidimensional fuzzy logic approach. Engineering, Construction and Architectural Management, 32(3), pp. 1715-1738. ISSN 0969-9988

Gunning, J G (2000) Models of customer satisfaction and service quality as research instruments in construction management. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Guo, H (2009) Rethinking construction project management using the VP-based manufacturing management model. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Guo, H B (2022) From corporate social responsibility to creating shared value: Competitive strategies for Chinese international construction companies on the "one belt one road". PhD thesis, University of Hong Kong, Hong Kong.

Guo, X (2008) Pricing and financing roads in transportation networks. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Guo, Youheng (2025) Defect information modeling in intelligent civil infrastructure asset management. PhD thesis, University of New South Wales, Australia.

Gupta, A (2013) Developing a BIM-based methodology to support renewable energy assessment of buildings. PhD thesis, Cardiff University, UK.

Gupta, P and Elhag, T (2025) Applicability of lean techniques and processes on improving sustainability in construction projects. Built Environment Project and Asset Management, 15(2), pp. 247-270. ISSN 2044-124X

Gupta, R; Shah, M N and Mandal, S N (2023) Emerging paradigm for land records in India. Smart and Sustainable Built Environment, 12(5), pp. 963-974. ISSN 2046-6099

Gupta, S; Jha, K N and Vyas, G (2022) Proposing building information modeling-based theoretical framework for construction and demolition waste management: Strategies and tools. International Journal of Construction Management, 22(12), pp. 2345-2355. ISSN 1562-3599

Gurgun, A P and Koc, K (2020) Contractor prequalification for green buildings: Evidence from Turkey. Engineering, Construction and Architectural Management, 27(6), pp. 1377-1400. ISSN 0969-9988

Gurmu, A.; Galluzzo, A. and Kite, J. (2021) Modelling customers' perception of the quality of services provided by builders: A case of Victoria, Australia. Construction Economics and Building, 21(1), pp. 100-124. ISSN 2204-9029

Gussias, A (2002) Service life management of concrete harbour structures. DrIng thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Guy, G B and Kibert, C J (1998) Developing indicators of sustainability: US experience. Building Research & Information, 26(1), pp. 39-45. ISSN 0961-3218

Gyasi-Addo, A J and Bennadji, A (2020) Investigating the major causes of morphological transformations in the cbd of Accra and the impact on urban heat island intensity. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Gyi, D E; Gibb, A G F and Haslam, R A (1999) The quality of accident and health data in the construction industry: Interviews with senior managers. Construction Management and Economics, 17(2), pp. 197-204. ISSN 01446193

Güney, E E (2025) Conservation of the village institutes’ heritage as a driver of sustainable development. PhD thesis, Middle East Technical University, Turkey.

Ha, D. K. (2026) An evaluation and comparison of critical factors contributing to falls-from-height hazards in Vietnamese building projects. Journal of Engineering, Design and Technology, 24(3), pp. 831-858. ISSN 1726-0531

Habert, G; Röck, M; Steininger, K; Lupísek, A; Birgisdottir, H; Desing, H; Chandrakumar, C; Pittau, F; Passer, A; Rovers, R; Slavkovic, K; Hollberg, A; Hoxha, E; Jusselme, T; Nault, E; Allacker, K and Lützkendorf, T (2020) Carbon budgets for buildings: Harmonising temporal, spatial and sectoral dimensions. Buildings & Cities, 1(1), pp. 429-452. ISSN 2632-6655

Hacker, M E; Kaminsky, J; Faust, K M and Rauch, S (2020) Regulatory enforcement approaches for mass population displacement. Journal of Construction Engineering and Management, 146(5): 1820, ISSN 0733-9364

Hadi, A; Cheung, F; Adjei, S and Dulaimi, A (2023) Evaluation of lean off-site construction literature through the lens of industry 4.0 and 5.0. Journal of Construction Engineering and Management, 149(12): 03123007, ISSN 0733-9364

Hadikusumo, B H W and Rowlinson, S (2004) Capturing safety knowledge using design-for-safety-process tool. Journal of Construction Engineering and Management, 130(2), pp. 281-289. ISSN 0733-9364

Haidar, A; Underwood, J and Coates, P (2019) Smart processes for smart buildings: 'Sustainable processes', 'recyclable processes' and 'building seeds' in parametric design. Architectural Engineering and Design Management, 15(5), pp. 402-429. ISSN 1745-2007

Haigh, R and Sutton, R (2012) Strategies for the effective engagement of multi-national construction enterprises in post-disaster building and infrastructure projects. International Journal of Disaster Resilience in the Built Environment, 3(3), pp. 270-282. ISSN 1759-5916

Hairstans, R (2007) Optimisation of timber platform frame construction. PhD thesis, Edinburgh Napier University, UK.

Hakkarainen, T E (2002) Studies on fire safety assessment of construction products. DSc(Tech) thesis, Tampereen Teknillinen Korkeakoulu, Finland.

Halabya, A and El-Rayes, K (2020) Optimizing the planning of pedestrian facilities upgrade projects to maximize accessibility for people with disabilities. Journal of Construction Engineering and Management, 146(1): 04019088, ISSN 0733-9364

Halder, A and Batra, S (2024) Navigating the ethical discourse in construction: A state-of-the-art review of relevant literature. Journal of Construction Engineering and Management, 150(3): 03124001, ISSN 0733-9364

Halloul, A H (2023) Relationships between leading and trailing indicators at construction sites in Yanbu Industrial City, Saudi Arabia. PhD thesis, University of South Florida, USA.

Hallowell, M R; Bhandari, S and Alruqi, W (2020) Methods of safety prediction: Analysis and integration of risk assessment, leading indicators, precursor analysis, and safety climate. Construction Management and Economics, 38(4), pp. 308-321. ISSN 01446193

Hallowell, M R; Hardison, D and Desvignes, M (2016) Information technology and safety: Integrating empirical safety risk data with building information modeling, sensing, and visualization technologies. Construction Innovation, 16(3), pp. 323-347. ISSN 1471-4175

Hamida, M B; Hassanain, M A and Al-Hammad, A M (2022) Review and assessment of factors affecting adaptive reuse of commercial projects in Saudi Arabia. International Journal of Building Pathology and Adaptation, 40(1), pp. 1-19. ISSN 23984708

Hamilton, A; Mitchell, G and Yli-Karjanmaa, S (2002) The BEQUEST toolkit: A decision support system for urban sustainability. Building Research & Information, 30(2), pp. 109-115. ISSN 0961-3218

Hammond, S F; Gajendran, T; Savage, D A and Maund, K (2021) Unpacking the problems behind the limited green construction adoption: Towards a theoretical model. Engineering, Construction and Architectural Management, 28(4), pp. 833-844. ISSN 0969-9988

Hamza, N and Greenwood, D (2007) The impact of procurement methods on delivering environmentally sensitive buildings. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Han, S (2013) Automated monitoring and systemic analysis of workers' safety behavior in construction operations. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Han, Y; Feng, Z; Zhang, J; Jin, R and Aboagye-Nimo, E (2019) Employees' safety perceptions of site hazard and accident scenes. Journal of Construction Engineering and Management, 145(1): 04018117, ISSN 0733-9364

Han, Y; Soomro, M A; Li, Y; Garvin, M J and Xue, R (2024) Exploring farmers' willingness to engage in participatory irrigation infrastructure programs: Evidence from a water-stressed region. Journal of Construction Engineering and Management, 150(6): 04024040, ISSN 0733-9364

Han, Y; Yin, Z; Liu, J; Jin, R; Gidado, K; Painting, N; Yang, Y and Yan, L (2019) Defining and testing a safety cognition framework incorporating safety hazard perception. Journal of Construction Engineering and Management, 145(12): 04019081, ISSN 0733-9364

Han, Y; Yin, Z; Zhang, J; Jin, R and Yang, T (2020) Eye-tracking experimental study investigating the influence factors of construction safety hazard recognition. Journal of Construction Engineering and Management, 146(8): 04020091, ISSN 0733-9364

Handojo, T (2001) The framework of a statistical acceptance plan based on the permanent deformation potential of asphalt concrete. PhD thesis, Pennsylvania State University, USA.

Haque, M O; Aman, J and Mohammad, F (2022) Construction sustainability of container-modular-housing in coastal regions towards resilient community. Built Environment Project and Asset Management, 12(3), pp. 467-485. ISSN 2044-124X

Harding, D and Boyd, P (2024) Generative AI and phd supervision: A covert third wheel or a seat at the table? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Hardison, D C (2018) Hazard recognition in design: Evaluating the effects of design information on hazard recognition performance. PhD thesis, University of Colorado at Boulder, USA.

Hare, B and Cameron, I (2011) Site manager safety training. Engineering, Construction and Architectural Management, 18(6), pp. 568-578. ISSN 0969-9988

Hare, B and Cameron, I (2012) Health and safety gateways for construction project planning. Engineering, Construction and Architectural Management, 19(2), pp. 192-204. ISSN 0969-9988

Hare, B; Cameron, I; Real, K J and Maloney, W F (2013) Exploratory case study of pictorial aids for communicating health and safety for migrant construction workers. Journal of Construction Engineering and Management, 139(7), pp. 818-825. ISSN 0733-9364

Hare, B; Cameron, I and Roy Duff, A (2006) Exploring the integration of health and safety with pre-construction planning. Engineering, Construction and Architectural Management, 13(5), pp. 438-450. ISSN 0969-9988

Hare, W J (2006) Integration of health and safety planning in construction project management through the development of a best practice gateway model. PhD thesis, Glasgow Caledonian University, UK.

Harinarain, Nishani and Babalola, Ayotunde (2026) Constraining sustainability: A critical examination of construction policy and practice in Nigeria. Journal of Construction Business and Management, 8(S1), pp. 111-124. ISSN 2521-0165

Harode, A; Thabet, W and Leite, F (2024) Formulation of feature and label space using modified Delphi in support of developing a machine-learning algorithm to automate clash resolution. Journal of Construction Engineering and Management, 150(3): 04023173, ISSN 0733-9364

Harper, G S (1997) Local government contract management: Decreasing cost overages in contracted out services. DPA thesis, University of La Verne, USA.

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Harris, P T and Holt, G D (1999) The management of sustainable social housing refurbishment strategies in the West Midlands region of the UK. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Hartenberger, U; Lorenz, D and Lützkendorf, T (2013) A shared built environment professional identity through education and training. Building Research & Information, 41(1), pp. 60-76. ISSN 0961-3218

Hartley, R (2016) Safety culture and climate in the construction industry: a multi-phase mixed methods investigation. PhD thesis, Loughborough University, UK.

Hartley, R and Cheyne, A (2009) Safety culture in the construction industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Hartley, R and Cheyne, A (2010) At first sight: Impressions of safety culture on construction sites. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Hartmann, A; Reymen, I M M J and Van Oosterom, G (2008) Factors constituting the innovation adoption environment of public clients. Building Research & Information, 36(5), pp. 436-449. ISSN 0961-3218

Harvey, E (2019) Rethinking construction safety. PhD thesis, Loughborough University, UK.

Harvey, E; Waterson, P and Dainty, A (2015) Comparing safety intelligence in air traffic management and construction: A conceptual comparison. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hasanain, F A (2022) A BIM-Mostadam plug-in design and evaluation model. PhD thesis, University of Florida, USA.

Hashemi, R and Shahbandarzadeh, H (2024) A fuzzy goal programming model for time, cost, and quality trade-off problem in metro construction projects considering sustainable development. International Journal of Construction Management, 24(3), pp. 323-330. ISSN 1562-3599

Hashim, R (2018) Green innovation adoption in the construction sector: the role of absorptive capacity and the effect of environmental requirements. PhD thesis, University of Edinburgh, UK.

Hassan, F U; Le, T and Le, C (2023) Automated approach for digitalizing scope of work requirements to support contract management. Journal of Construction Engineering and Management, 149(4): 04023005, ISSN 0733-9364

Hassan, H (2020) Psychosocial risks among migrant workers in the Middle East construction sector. PhD thesis, University of Nottingham, UK.

Hassan, O A B (2016) Effect of foundation designs of passive house on the thermal bridges at the ground. Journal of Engineering, Design and Technology, 14(3), pp. 602-613.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(4), pp. 835-850.

Hassan, O A B and Johansson, C (2018) Glued laminated timber and steel beams: A comparative study of structural design, economic and environmental consequences. Journal of Engineering, Design and Technology, 16(3), pp. 398-417. ISSN 1726-0531

Hassan Ali, A; Farouk Kineber, A; Elshaboury, N; Arashpour, M and Osama Daoud, A (2025) Analysing multifaceted barriers to modular construction in sustainable building projects: a comprehensive evaluation using multi-criteria decision making. International Journal of Construction Management, 25(1), pp. 1-17. ISSN 1562-3599

Hassanain, M A; Aljuhani, M; Sanni-Anibire, M O and Abdallah, A (2019) Interdisciplinary design checklists for mechanical, electrical and plumbing coordination in building projects. Built Environment Project and Asset Management, 9(1), pp. 29-43. ISSN 2044-124X

Hassanein, A A G and Hanna, R S (2008) Safety performance in the Egyptian construction industry. Journal of Construction Engineering and Management, 134(6), pp. 451-455. ISSN 0733-9364

Hassler, U (2009) Long-term building stock survival and intergenerational management: The role of institutional regimes. Building Research & Information, 37(5-6), pp. 552-568. ISSN 0961-3218

Hassler, U and Kohler, N (2014) The ideal of resilient systems and questions of continuity. Building Research & Information, 42(2), pp. 158-167. ISSN 0961-3218

Hatush, Z and Skitmore, M (1997) Criteria for contractor selection. Construction Management and Economics, 15(1), pp. 19-38. ISSN 01446193

Haupt, T C (2001) The performance approach to construction worker safety and health. PhD thesis, University of Florida, USA.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(2), pp. 373-419.

Hayes, J; McDermott, V and Lingard, H (2015) What is risk? Construction activity near hazardous infrastructure. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hayford, J K T; Eccles, T and Fong, D (2023) Development of conceptual motivation framework to enhance construction labour productivity in the UK. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Hayles, C S (2010) An examination of decision making in post disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 1(1), pp. 103-122. ISSN 1759-5916

He, C; McCabe, B; Jia, G and Sun, J (2020) Effects of safety climate and safety behavior on safety outcomes between supervisors and construction workers. Journal of Construction Engineering and Management, 146(1): 04019092, ISSN 0733-9364

He, Q; Wu, Z; Li, S; Li, H and Wang, Y (2023) Two decades of the evolution of China's green building policy: Insights from text mining. Building Research & Information, 51(2), pp. 158-178. ISSN 0961-3218

He, S (2018) A project-level infrastructure management framework for sustainable roadways. PhD thesis, Syracuse University, USA.

Heard, I; Love, P E D; Sing, M C P and Goerke, V (2017) Learning to build relationships for a better Australia: Indigenous reconciliation in action in the construction and resource sectors. Construction Innovation, 17(1), pp. 4-24. ISSN 1471-4175

Hedborg, S (2022) ”It’s in the between”: Inter-project organising in project ecologies. PhD thesis, KTH Royal Institute of Technology, Sweden.

Hedborg, S and Karrbom Gustavsson, T (2020) Developing a neighbourhood: Exploring construction projects from a project ecology perspective. Construction Management and Economics, 38(10), pp. 964-976. ISSN 01446193

Hedborg, S and Rosander, L (2024) Self-organizing in urban development: Developers coordinating between construction projects. Construction Management and Economics, 42(2), pp. 114-128. ISSN 01446193

Hedborg Bengtsson, S (2019) Coordinated construction logistics: An innovation perspective. Construction Management and Economics, 37(5), pp. 294-307. ISSN 01446193

Hefferan, Michael (2006) An examination of the interface between commercial property assets and contemporary knowledge-intensive firms: Demands, responses and priorities. PhD thesis, Queensland University of Technology, Australia.

Heffernan, E; Pan, W and Liang, X (2012) Delivering zero carbon homes in the UK. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Heffernan, E E (2015) Delivering zero carbon homes and sustainable communities: The potential of group self-build housing in England. PhD thesis, University of Plymouth, UK.

Heidari, A; Imani, D M and Khalilzadeh, M (2021) A hub location model in the sustainable supply chain considering customer segmentation. Journal of Engineering, Design and Technology, 19(6), pp. 1387-1420. ISSN 1726-0531

Helen, C L; Cooke, T and Blismas, N (2010) Properties of group safety climate in construction: The development and evaluation of a typology. Construction Management and Economics, 28(10), pp. 1099-1112. ISSN 1466433X

Hellenborn, B; Eliasson, O; Yitmen, I and Sadri, H (2024) Asset information requirements for blockchain-based digital twins: A data-driven predictive analytics perspective. Smart and Sustainable Built Environment, 13(1), pp. 22-41. ISSN 2046-6099

Hendrickson, C and Horvath, A (2000) Resource use and environmental emissions of U.S. Construction sectors. Journal of Construction Engineering and Management, 126(1), pp. 38-44. ISSN 0733-9364

Hendy, A O A (2007) An approach to sustainable construction in post-disaster contexts: with specific reference to the Marmara region of Turkey. PhD thesis, Coventry University, UK.

Heravi, M Y; Jang, Y and Chauhan, H (2025) Comparative analysis of deep-learning approaches for automatic recognition of awkward postures in construction environments through wrist-worn biosensors. Journal of Construction Engineering and Management, 151(8): 04025108, ISSN 0733-9364

Herazo, B and Lizarralde, G (2015) The influence of green building certifications in collaboration and innovation processes. Construction Management and Economics, 33(4), pp. 279-298. ISSN 01446193

Hermans, M; van Zoest, S and Volker, L (2016) Assessing the maturity of public construction client organisations. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Herrera-Pérez, V.; Rubio-Romero, J. C.; Fuertes, A.; Salguero-Caparrós, F. and del Carmen Pardo-Ferreira, M. (2026) Investigating the impact of medication consumption on crane-related occupational health and safety risks in construction projects. Journal of Construction Engineering and Management, 152(8): 04026116, ISSN 0733-9364

Hezel, Claudia Regina (2014) Impact assessment of the requirements of the contractor in integrated management systems for industrial assembly companies in the oil industry. PhD thesis, Universidade Estadual de Campinas, Brazil.

Hide, S (2003) Exploring accident causation in the construction industry. PhD thesis, Loughborough University, UK.

Hiete, M; Stengel, J; Ludwig, J and Schultmann, F (2011) Matching construction and demolition waste supply to recycling demand: A regional management chain model. Building Research & Information, 39(4), pp. 333-351. ISSN 0961-3218

Higham, A and Fortune, C (2010) The early stage benefit planning of housing rengeneration projects: The gap between theory and practice. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Higham, A and Fortune, C (2011) Sustainable asset management (SAM) decision making: An exploration of current practice. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Higham, A and Fortune, C J (2012) Investment appraisal tools and sustainability evaluation in social housing. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Higham, A and Stephenson, P (2014) Identifying project success criteria for UK social housing asset management schemes. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Hill, C and Ainsworth, A (2001) Health and safety: Academic research and practical application. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Hill, R C and Bowen, P A (1997) Sustainable construction: Principles and a framework for attainment. Construction Management and Economics, 15(3), pp. 223-239. ISSN 01446193

Himpe, E; Trappers, L; Debacker, W; Delghust, M; Laverge, J; Janssens, A; Moens, J and Van Holm, M (2013) Life cycle energy analysis of a zero-energy house. Building Research & Information, 41(4), pp. 435-449. ISSN 0961-3218

Hinkel, M P (2022) Three essays on labor market regulation in the American construction industry. PhD thesis, Michigan State University, USA.

Hinsberg, K L (2025) Crisis and governance communication for construction safety. PhD thesis, Arizona State University, USA.

Hinze, J (2005) Use of trench boxes for worker protection. Journal of Construction Engineering and Management, 131(4), pp. 494-500. ISSN 0733-9364

Hinze, J and Antal, T (1991) Construction contract provisions for preservation of artifacts. Journal of Construction Engineering and Management, 117(1), pp. 106-117. ISSN 0733-9364

Hinze, J; Godfrey, R and Sullivan, J (2013) Integration of construction worker safety and health in assessment of sustainable construction. Journal of Construction Engineering and Management, 139(6), pp. 594-600. ISSN 0733-9364

Hinze, J; Hallowell, M and Baud, K (2013) Construction-safety best practices and relationships to safety performance. Journal of Construction Engineering and Management, 139(10): 04013006, ISSN 0733-9364

Hirbod, S (2018) The application of EnerPHit standard to residential tower blocks in the UK. PhD thesis, University of Kent, UK.

Hlatshwayo, T; Emuze, F and Smallwood, J J (2025) Efficacy of the construction industry legislative framework in developing countries: An Eswatini case. Built Environment Project and Asset Management, 15(1), pp. 1-17. ISSN 2044-124X

Ho, C M F (2011) Ethics management for the construction industry: A review of ethical decision-making literature. Engineering, Construction and Architectural Management, 18(5), pp. 516-537. ISSN 0969-9988

Ho, D C W; Chau, K W and Yau, Y (2008) Evaluating unauthorized appendages in private apartment buildings. Building Research & Information, 36(6), pp. 568-579. ISSN 0961-3218

Ho, M F; Drew, D; McGeorge, D and Loosemore, M (2004) Implementing corporate ethics management and its comparison with the safety management system: A case study in Hong Kong. Construction Management and Economics, 22(6), pp. 595-606. ISSN 01446193

Hoffman, S; Mackie, P K and Pritchard, J (2010) Anti-social behaviour law and policy in the United Kingdom: Assessing the impact of enforcement action in the management of social housing. International Journal of Law in the Built Environment, 2(1), pp. 26-44. ISSN 1756-1450

Holt, G D (2016) Opposing influences on construction plant and machinery health and safety innovations. Construction Innovation, 16(3), pp. 390-414. ISSN 1471-4175

Holt, G D and Edwards, D J (2014) Machinery transportation management: Case study of "plant-trailer" H&S incidents. Built Environment Project and Asset Management, 4(3), pp. 264-280. ISSN 2044-124X

Holt, G D; Goulding, J S and Akintoye, A (2016) Enablers, challenges and relationships between research impact and theory generation. Engineering, Construction and Architectural Management, 23(1), pp. 20-39. ISSN 0969-9988

Holt, G D; Proverbs, D G and Whitehouse, L (2001) A survey of public sector procurement in England. Journal of Construction Procurement, 7(1), pp. 3-10. ISSN 1358-9180

Holton, I R (2009) Developing a sector sustainability strategy for the UK precast concrete industry. EngD thesis, Loughborough University, UK.

Holtzhower, D L (2015) Decision model to optimize wastewater treatment in the built environment. PhD thesis, University of Florida, USA.

Home, R (2012) Forced eviction and planning enforcement: The Dale Farm gypsies. International Journal of Law in the Built Environment, 4(3), pp. 178-188. ISSN 1756-1450

Hon, C K H; Chan, A P C and Yam, M C H (2013) Determining safety climate factors in the repair, maintenance, minor alteration, and addition sector of Hong Kong. Journal of Construction Engineering and Management, 139(5), pp. 519-528. ISSN 0733-9364

Hon, C K H; Sun, C; Way, K A; Jimmieson, N L; Xia, B and Biggs, H C (2024) Psychosocial hazards affecting mental health in the construction industry: A qualitative study in Australia. Engineering, Construction and Architectural Management, 31(8), pp. 3165-3192. ISSN 0969-9988

Hon, K H (2012) Relationships between safety climate and safety performance of repair, maintenance, minor alteration and addition (RMAA) works. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Hong, X (2002) A comparative study of contractor performance based on Japanese, UK and US construction practice. PhD thesis, University of Wolverhampton, UK.

Hooper, M (2015) BIM anatomy II: Standardisation needs & support systems. PhD thesis, Lund University, Sweden.

Hopfe, C J (2009) Uncertainty and sensitivity analysis in building performance simulation for decision support and design optimization. PhD thesis, Eindhoven University of Technology, Netherlands.

Hopkin, C and Lay, S (2024) Conceptual arguments on the use of unlatched reverse swing "flappy" door smoke control systems in residential buildings. International Journal of Building Pathology and Adaptation, 42(4), pp. 618-636. ISSN 23984708

Hopkin, C; Spearpoint, M; Hopkin, D and Wang, Y (2020) Fire safety design of open plan apartments in England. Architectural Engineering and Design Management, 16(5), pp. 391-410. ISSN 1745-2007

Hopkin, T; Lu, S-L; Rogers, P and Sexton, M (2017) Key stakeholders' perspectives towards UK new-build housing defects. International Journal of Building Pathology and Adaptation, 35(2), pp. 110-123.

Horne, K A; Gibb, A G F; Pavitt, T C and Haslam, R A (2003) D4h: Influences on designing for health: Results from interviews and questionnaires. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Horvath, A (1997) Estimation of environmental implications of construction materials and designs using life cycle assessment techniques. PhD thesis, Carnegie Mellon University, USA.

Hossain, M M and Ahmed, S (2022) Developing an automated safety checking system using BIM: A case study in the Bangladeshi construction industry. International Journal of Construction Management, 22(7), pp. 1206-1224. ISSN 1562-3599

Hou, S (2015) An ontology-based holistic approach for multi-objective sustainable structural design. PhD thesis, Cardiff University, UK.

Houlihan, T J (1994) The New York City building trades, 1890-1910. PhD thesis, State University of New York at Binghamton, USA.

Howarth, T; Stoneman, G and Hill, C (2000) A review of the construction (design and management) regulations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Hsiao, C-C (2000) Constructing a sustainable impact assessment methodology: an evaluation of Taiwanese EIA of high-rise building. PhD thesis, University of Edinburgh, UK.

Hu, H; Deng, X and Mahmoudi, A (2023) A cognitive model for understanding fraudulent behavior in construction industry. Engineering, Construction and Architectural Management, 30(4), pp. 1423-1443. ISSN 0969-9988

Hu, K (2011) Three essays on modeling complex dynamic problems in health and safety. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Hu, X and Liu, C (2016) Profitability performance assessment in the Australian construction industry: A global relational two-stage DEA method. Construction Management and Economics, 34(3), pp. 147-159. ISSN 01446193

Hu, X and Liu, C (2018) Measuring efficiency, effectiveness and overall performance in the Chinese construction industry. Engineering, Construction and Architectural Management, 25(6), pp. 780-797. ISSN 0969-9988

Hu, X; Xia, B; Skitmore, M and Buys, L (2015) Conceptualizing sustainable retirement villages in Australia. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hu, Xiancun (2015) Construction industry performance measurement with carbon reduction. PhD thesis, Deakin University, Australia.

Hu, Xiaoqiang (2023) New approaches to improving highway design, safety, and visual presentation. PhD thesis, Purdue University, USA.

Hua, Y; He, J; Gong, J and Zhao, J (2020) Hazardous area risk-based evacuation simulation and analysis of building construction sites. Journal of Construction Engineering and Management, 146(5): 04020047, ISSN 0733-9364

Huang, C F and Lien, H C (2012) An empirical analysis of the influences of corporate social responsibility on organizational performance of Taiwan's construction industry: Using corporate image as a mediator. Construction Management and Economics, 30(4), pp. 263-275. ISSN 1466433X

Huang, J; Abadi, M; Manu, P and Cheung, C (2022) The impact of sustainability rating systems on health and safety in building projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(2), pp. 49-64. ISSN 17514304

Huang, J; Han, D; Zhang, H and Cui, W (2024) Framework and case study for the assembly accuracy prediction of prefabricated buildings using BIM and tls. Architectural Engineering and Design Management, 20(6), pp. 1427-1453. ISSN 1745-2007

Huang, K; Jia, G; Liu, D and Ma, Y (2018) The transformation mechanism of work-related stress into unsafe behaviour in construction industry: Based on DEA method. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Huang, N; Du, Q; Zou, P X W and Huang, Y (2023) Analysis of key factors influencing green highway project development focusing on network interaction and project success: Evidence from China. Engineering, Construction and Architectural Management, 30(8), pp. 3203-3223. ISSN 0969-9988

Huang, W H; Tserng, H P; Jaselskis, E J and Lee, S Y (2014) Dynamic threshold cash flow-based structural model for contractor financial prequalification. Journal of Construction Engineering and Management, 140(10): 04014047, ISSN 0733-9364

Hudson, F S; Sutrisna, M and Chawynski, G (2021) A certification framework for managing the risks of non-compliance and non-conformance building products: A Western Australian perspective. International Journal of Building Pathology and Adaptation, 39(2), pp. 312-343. ISSN 23984708

Hughes, C and Crosby, N (2012) The challenge of self-regulation in commercial property leasing: A study of lease codes in the UK. International Journal of Law in the Built Environment, 4(1), pp. 23-44. ISSN 1756-1450

Hui, E C M and Ng, I (2009) Price discovery of property markets in Shenzhen and Hong Kong. Construction Management and Economics, 27(12), pp. 1175-1196. ISSN 1466433X

Hulett, D A (2001) The disintegration and reintegration of building contractors' management systems. PhD thesis, University of Salford, UK.

Humphreys, M A (2005) Quantifying occupant comfort: Are combined indices of the indoor environment practicable? Building Research & Information, 33(4), pp. 317-325. ISSN 0961-3218

Hung, Y H; Smith-Jackson, T and Winchester, W (2011) Use of attitude congruence to identify safety interventions for small residential builders. Construction Management and Economics, 29(2), pp. 113-130. ISSN 1466433X

Huni, Tendai (2025) Social power configurations influencing relationship strength and supplier performance in the construction industry. PhD thesis, Vaal University of Technology, South Africa.

Hunt, Peter (2021) The business case for sustainable development in the Australian built environment. PhD thesis, University of New South Wales, Australia.

Huo, X; Yu, A T W; Zezhou, W and Jayantha, W M (2020) Site planning and design of green residential building projects: Case studies in China. Engineering, Construction and Architectural Management, 27(2), pp. 525-543. ISSN 0969-9988

Huovinen, P (2020) Advancement of the design of AEC-related business management concepts along the common good dimension. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Husna, C; Firdaus, R; Wardani, E and Jannah, S R (2022) Disaster preparedness among disaster management agency officers: A study from rural and urban areas in aceh, Indonesia. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 484-497. ISSN 1759-5916

Hussain, A.; Che Ibrahim, C. K. I.; Belayutham, S.; Manu, P. and Cheung, C. (2026) Exploring regulatory capabilities for design for safety in construction: The case of Malaysia. Built Environment Project and Asset Management, 16(2), pp. 221-241. ISSN 2044-124X

Hussain, A; Ibrahim, C K I C; Belayutham, S; Manu, P and Nazruddin, M A (2023) Oshcim: A study on Malaysian occupational safety and health regulatory capabilities readiness in the design phase. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Hussin, M H; Othman, N H and Wan Ibrahim, M H (2019) Carbonation of concrete containing mussel (Perna viridis) shell ash. Journal of Engineering, Design and Technology, 17(5), pp. 904-928. ISSN 1726-0531

Hutchings, D M (2002) An investigation of management practices used in small-volume home building companies of the United States. PhD thesis, Texas A&M University, USA.

Huuhka, S (2016) Vacant residential buildings as potential reserves: A geographical and statistical study. Building Research & Information, 44(8), pp. 816-839. ISSN 0961-3218

Hwang, S; Blay, K; Osmani, M and Wang, M (2026) Blockchain-integrated relational project governance. Journal of Construction Engineering and Management, 152(3): 04026003, ISSN 0733-9364

Hwang, B G; Krishnankutty, P; Zhu, L; Caldas, C H; Shounak, A and Mulva, S (2020) Improving labour productivity in process construction maintenance and shutdown/turnaround projects. International Journal of Construction Management, 20(7), pp. 822-836. ISSN 1562-3599

Hwang, B G; Zhao, X and Lim, J (2020) Job satisfaction of project managers in green construction projects: Influencing factors and improvement strategies. Engineering, Construction and Architectural Management, 27(1), pp. 205-226. ISSN 0969-9988

Hyari, K and El-Rayes, K (2006) Field experiments to evaluate lighting performance in nighttime highway construction. Construction Management and Economics, 24(6), pp. 591-601. ISSN 1466433X

Ibbotson, K (2020) Prioritising carbon reduction in UK public sector flood and coastal risk management. PhD thesis, University of Bolton, UK.

Ibe, C. N. (2026) Optimising sustainable deconstruction strategies for concrete structures: A multi-criteria decision-making framework approach. International Journal of Building Pathology and Adaptation, 44(3), pp. 773-788. ISSN 2398-4708

Ibrahim, I.; Haj-Salem, N.; Ashour, A. G. and Alotaibi, E. B. (2026) Assessment of consumer behaviour towards recycled plastic products: Insights from the UAE. Construction Economics and Building, 26(2), ISSN 2204-9029

Ibrahim, C K I C; Manu, P; Belayutham, S; Cheung, C; Mohamad, M Z; Yunusa-Kaltungo, A; Ismail, S and Hussain, A (2023) Factors influencing dfs adoption: The case of Malaysian construction organisations. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ibrahim, F S; Esa, M and Kamal, E M (2022) Strategies to minimise the impact of COVID-19 on the construction industry: A case study of construction site clusters in Malaysia. Construction Economics and Building, 22(3), pp. 21-42. ISSN 2204-9029

Ibrahim, K; Simpeh, F and Adebowale, O J (2025) Benefits and challenges of wearable safety devices in the construction sector. Smart and Sustainable Built Environment, 14(1), pp. 50-71. ISSN 2046-6099

Ibrahim, M W; Hanna, A S; Russell, J S; Abotaleb, I S and El-Adaway, I H (2020) Quantitative analysis of the impacts of out-of-sequence work on project performance. Journal of Construction Engineering and Management, 146(8): 04020090, ISSN 0733-9364

Icibaci, L M (2019) Re-use of building products in the Netherlands: The development of a metabolism based assessment approach. PhD thesis, Delft University of Technology, Netherlands.

Idrus A.B, N J B (2002) Construction related factors influencing the choice of concrete floor systems. Construction Management and Economics, 20(1), pp. 13-19. ISSN 01446193

Ihuah, P W (2015) Conceptual framework for the sustainable management of social (public) housing estates in the Niger Delta region of Nigeria. PhD thesis, University of Salford, UK.

Ikediashi, D; Udo, G and Ofoegbu, M (2020) Post-occupancy evaluation of University of Uyo buildings. Journal of Engineering, Design and Technology, 18(6), pp. 1711-1730. ISSN 1726-0531

Ikpe, E; Hammon, F and Oloke, D (2012) Cost-benefit analysis for accident prevention in construction projects. Journal of Construction Engineering and Management, 138(8), pp. 991-998. ISSN 0733-9364

Ikpe, E; Hammond, F and Proverbs, D (2008) Cost-benefit analysis (CBA) of construction health and safety management: A theoretical discussion. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Ikpe, E K P P D O D (2006) The management of construction health and safety: Investigating the cost-benefit. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ikpe, E O (2009) Development of cost benefit analysis model of accident prevention on construction projects. PhD thesis, University of Wolverhampton, UK.

Ilgın, H E (2023) An analysis of space efficiency in asian supertall towers. International Journal of Building Pathology and Adaptation, 41(6), pp. 237-253. ISSN 23984708

Ilhan, B and Yobas, B (2019) Measuring construction for social, economic and environmental assessment. Engineering, Construction and Architectural Management, 26(5), pp. 746-765. ISSN 0969-9988

Ilozor, B B (2008) Architectural and building features disparity and preservation of structural and fabrics integrity. Journal of Engineering, Design and Technology, 6(1), pp. 33-47. ISSN 1726-0531

Im, K (2025) Interdependency in the construction sector and assessing interdependent economic losses due to demand-side fluctuations. Journal of Construction Engineering and Management, 151(12): 04025187, ISSN 0733-9364

Imriyas, K; Low, S P; Teo, A L and Chan, S L (2008) Premium-rating model for workers' compensation insurance in construction. Journal of Construction Engineering and Management, 134(8), pp. 601-617. ISSN 0733-9364

Imriyas, K; Pheng, L S and Teo, E A L (2007) A framework for computing workers' compensation insurance premiums in construction. Construction Management and Economics, 25(6), pp. 563-584. ISSN 1466433X

Infante-Perea, M; Román-Onsalo, M and Navarro-Astor, E (2025) Occupational alternatives in Spanish building engineering: A gender perspective. Journal of Engineering, Design and Technology, 23(6), pp. 2005-2022. ISSN 1726-0531

Inti, S (2016) A decision making approach for selection of sustainable pavements in Texas by integrating life cycle cost analysis (LCCA), life cycle assessment (LCA) of environmental and social impacts. PhD thesis, University of Texas at El Paso, USA.

Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks. PhD thesis, University of Alberta, Canada.

Inyim, P (2015) Time, cost, and environmental impact analysis for sustainable design at multiple building levels. PhD thesis, Florida International University, USA.

Inácio, M F M (1999) The building deconstruction process and the debris trail: towards a dynamic model. PhD thesis, University of Salford, UK.

Ioannidou, D (2016) On sustainability aspects through the prism of stone as a material for construction. DSc thesis, ETH Zürich, Switzerland.

Irizarry, J (2005) Safety issues in steel erection: Impact on task durations and risk perception of ironworkers. PhD thesis, Purdue University, USA.

Irizarry, J; Simonsen, K L and Abraham, D M (2005) Effect of safety and environmental variables on task durations in steel erection. Journal of Construction Engineering and Management, 131(12), pp. 1310-1319. ISSN 0733-9364

Irving, P A (2016) Explicating excessive financial resource allocation by building control in achieving regulatory conformity in domestic extensions. PhD thesis, University of Salford, UK.

Isaacs, J; Falconer, R; Gilmour, D and Blackwood, D (2010) Modelling and visualizing sustainability assessment in urbanenvironments. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Isiadinso, C; Anumba, C J; El-Rimawi, J and Bhamra, T (2006) Design for deconstruction lessons from the manufacturing industry. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Islam, M A; Shetu, M M and Hakim, S S (2022) Possibilities of a gender-responsive infrastructure for livelihood-vulnerable women's resilience in rural-coastal Bangladesh. Built Environment Project and Asset Management, 12(3), pp. 447-466. ISSN 2044-124X

Ismaeel, W S E (2020) An integrated model for energy-efficient building opening design. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ismail, S; Hon, C K H; Crowther, P; Skitmore, M and Lamari, F (2023) The drivers and challenges of adopting the Malaysia industrialised building system for sustainable infrastructure development. Construction Innovation, 23(5), pp. 1054-1074. ISSN 1471-4175

Ismail, S; Ibrahim, C K I C; Manu, P; Belayutham, S and Cheung, C M (2024) Capturing insights: Integrating design for safety educational elements into curricula. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ismail, Z A (2020) Planning the maintenance of green building materials for sustainable development: A building information modelling approach. Journal of Financial Management of Property and Construction, 26(1), pp. 141-157. ISSN 1366-4387

Ismail, Z A B (2023) A BIM-based model checking in the green building maintenance: A review. Construction Innovation, 23(2), pp. 487-503. ISSN 1471-4175

Israel, B (2023) The impact of clients' procurement challenges on the substance goals of roads construction projects in songwe, Tanzania. International Journal of Construction Management, 23(12), pp. 2144-2150. ISSN 1562-3599

Itoya, E (2012) Carbon emissions evaluation for highway management and maintenance. EngD thesis, Loughborough University, UK.

Jaafar, M; Nuruddin, A R and Abu Bakar, S P S (2014) Business success and psychological traits of housing developers. Construction Economics and Building, 14(2), pp. 57-72. ISSN 2204-9029

Jaafar, M; Salim, N A A; Salleh, N M; Sulieman, M Z; Ulang, N M and Ebekozien, A (2023) Developing a framework for fire safety management plan: The case of Malaysia's public hospital buildings. International Journal of Building Pathology and Adaptation, 41(4), pp. 713-733. ISSN 23984708

Jackson, E N and Shanmuga Priya, T (2025) Identifying critical risk management performance indicators for construction projects in Ghana using confirmatory factor analysis. Construction Economics and Building, 25(3-4), pp. 22-42. ISSN 2204-9029

Jackson, F (2006) Biodegradable hydraulic fluids: Reducing oil-related pollution in the construction industry. PhD thesis, Nottingham Trent University, UK.

Jackson, J I (2009) Collaboration in planning sustainable developments. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 162(2), pp. 69-74. ISSN 17514312

Jacobs, A (2007) Will the new offence of corporate manslaughter motivate companies to prioritise safety over profit? PhD thesis, University of Birmingham, UK.

Jacobsen, E L; Solberg, A; Golovina, O and Teizer, J (2022) Active personalized construction safety training using run-time data collection in physical and virtual reality work environments. Construction Innovation, 22(3), pp. 531-553. ISSN 1471-4175

Jacques de Sousa, L; Poças Martins, J and Sanhudo, L (2024) Predicting construction project compliance with machine learning model: case study using Portuguese procurement data. Engineering, Construction and Architectural Management, 31(13), pp. 285-302. ISSN 0969-9988

Jaenglom, Kamonmarn (2014) Exploring construction supply chain management: A systematic perspective for creating sustainable performance. PhD thesis, Università degli Studi di Bergamo, Italy.

Jafari, A; Valentin, V and Bogus, S M (2019) Identification of social sustainability criteria in building energy retrofit projects. Journal of Construction Engineering and Management, 145(2): 04018136, ISSN 0733-9364

Jafarzadeh, R; Wilkinson, S; González, V; Ingham, J M and Amiri, G G (2014) Predicting seismic retrofit construction cost for buildings with framed structures using multilinear regression analysis. Journal of Construction Engineering and Management, 140(3): 4013062, ISSN 0733-9364

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jaiswal, A; Kumar, A; Pal, I; Raisinghani, B and Bhoraniya, T H (2022) Sustainable management of coastal critical infrastructure: Case study of multi-purpose cyclone shelters in South Asia. International Journal of Disaster Resilience in the Built Environment, 13(3), pp. 304-326. ISSN 1759-5916

Jalali, Farhang (2020) Quantifying pavement preservation performance using probabilistic deterioration modeling. PhD thesis, Auburn University, USA.

Jalloul, H; Choi, J; Manheim, D; Yesiller, N and Derrible, S (2024) Incorporating disaster debris into sustainable construction research and practice. Journal of Construction Engineering and Management, 150(1): 02523001, ISSN 0733-9364

James, P and Matipa, W M (2004) Sustainable construction in a developing country: An assessment of how the professional's practice impact the environment. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

James, P D (2012) The specification of construction strategies for low and zero carbon homes: decision-making tools and the evaluation of whole life energy, carbon, cost and performance. PhD thesis, University of Manchester, UK.

Jamir Singh, P S; Oke, A E; Aliu, J; Isaiah Kayode, T; Azura Ramli, R; Haizzan Yahaya, M and Idris, A (2026) A study on substance abuse awareness and usage trends within the construction sector. Construction Innovation, 26(3), pp. 674-692. ISSN 1471-4175

Jamir Singh, P S; Oke, A E; Aliu, J; Isaiah Kayode, T; Ramli, R and Haizzan Yahaya, M (2025) Building safely, living well: Combating substance abuse in the construction industry. International Journal of Construction Management, 25(13), pp. 1626-1635. ISSN 1562-3599

Janda, K B; Bright, S; Patrick, J; Wilkinson, S and Dixon, T J (2016) The evolution of green leases: Towards inter-organizational environmental governance. Building Research & Information, 44(5-6), pp. 660-674. ISSN 0961-3218

Jaramillo, L V (2019) Implementations of resilience engineering for natural system disturbances: A panarchical perspective. PhD thesis, University of New Mexico, USA.

Jaskula, K; Kifokeris, D; Papadonikolaki, E and Rovas, D (2025) Blockchain-based decentralized common data environment: User requirements and conceptual framework. Journal of Construction Engineering and Management, 151(9): 04025112, ISSN 0733-9364

Jaskula, Klaudia (2024) Blockchain-enabled CBIM for lifecycle data provenance. PhD thesis, University College London, UK.

Jatau, T S; Emuze, F and Smallwood, J (2023) Rethinking health and safety training to serve people in the construction industry better. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(3), pp. 97-103. ISSN 17514304

Jayakody, R R J C and Amaratunga, D (2021) Guiding factors for planning public open spaces to enhance coastal cities' disaster resilience to tsunamis. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 471-483. ISSN 1759-5916

Jayakrishna, K; Girubha, R J and Vinodh, S (2016) Comparison of sustainability characteristics of conventional and CNC turning processes: A case study. Journal of Engineering, Design and Technology, 14(3), pp. 422-445.

Jayasena, N S; Chan, D W M and Kumaraswamy, M (2024) Benefits, enablers and barriers in deploying PPP when developing smart infrastructure in non-urban areas. Built Environment Project and Asset Management, 14(1), pp. 92-108. ISSN 2044-124X

Jayasena, N S; Chan, D W M; Kumaraswamy, M M and Saka, A B (2023) Applicability of public-private partnerships in smart infrastructure development: The case of Hong Kong. International Journal of Construction Management, 23(11), pp. 1932-1944. ISSN 1562-3599

Jayasena, N S; Mallawaarachchi, H and De Silva, L (2020) Environmental sustainability of facilities management: Analytical hierarchy process (AHP) based model for evaluation. Built Environment Project and Asset Management, 10(2), pp. 261-276. ISSN 2044-124X

Jayasinghe, R S; Rameezdeen, R and Chileshe, N (2023) Modelling the cause and effect relationship risks in reverse logistics supply chains for demolition waste. Engineering, Construction and Architectural Management, 30(9), pp. 4018-4044. ISSN 0969-9988

Jayawardana, J; Sandanayake, M; Jayasinghe, J A S C; Kulatunga, A K and Zhang, G K (2025) Life cycle economic and social sustainability aspects of prefabricated construction: A systematic review towards the holistic sustainability. Construction Innovation, 25(7), pp. 98-138. ISSN 1471-4175

Jayawardana, Jayawardanage Janappriya (2024) Investigating the sustainability of modern construction practices focusing on prefabricated construction. PhD thesis, RMIT University, Australia.

Jean, A T; Wang, X and Suntu, S (2020) Corporate social responsibility in madagascar: An investigation on Chinese companies. International Journal of Construction Management, 20(1), pp. 29-38. ISSN 1562-3599

Jeelani, I (2019) Improving safety performance in construction using visual data analytics and virtual reality. PhD thesis, North Carolina State University, USA.

Jensen, E and Koch, C (2003) Making large infrastructure projects safe: The case of the Copenhagen Metro. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Jensen, J O and Gram-Hanssen, K (2008) Ecological modernization of sustainable buildings: A Danish perspective. Building Research & Information, 36(2), pp. 146-158. ISSN 0961-3218

Jergeas, G F and Revay, S O (1993) Quantifying construction claims using the differential cost method. Construction Management and Economics, 11(2), pp. 163-166. ISSN 01446193

Jewell, C (2006) Informal employment: A threat or an opportunity for the UK construction sector? In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Jha, K N and Misra, S (2007) Ranking and classification of construction coordination activities in Indian projects. Construction Management and Economics, 25(4), pp. 409-421. ISSN 1466433X

Jia, A Y; Loosemore, M; Gilbert, D and Rowlinson, S (2016) Shielding workers from heat stress: Reconciling the paradoxes of protection and production logics. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.