Items with Subject: health risk and incident analysis

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abanomi, W M (2005) Environmental design of prototype school buildings in hot, arid regions with special reference to Riyadh, Saudi Arabia. PhD thesis, Cardiff University, UK.

Abbas, G M and Gursel Dino, I (2022) The impact of natural ventilation on airborne biocontaminants: A study on COVID-19 dispersion in an open office. Engineering, Construction and Architectural Management, 29(4), pp. 1609-1641. ISSN 0969-9988

Abbasnejad, B; Soltani, S and Wong, P (2024) A systematic review of online learning and teaching strategies during the COVID-19 pandemic: Implications for the construction management sector. Smart and Sustainable Built Environment, 13(4), pp. 934-959. ISSN 2046-6099

Abduh, M; Sukardi, S N; Wirahadikusumah, R D; Oktaviani, C Z and Bahagia, S N (2023) Maturity of procurement units for public construction projects in Indonesia. International Journal of Construction Management, 23(13), pp. 2171-2184. ISSN 1562-3599

Abdul Nasir, N A B; Hassan, A S; Khozaei, F and Abdul Nasir, M H B (2021) Investigation of spatial configuration management on social distancing of recreational clubhouse for COVID-19 in Penang, Malaysia. International Journal of Building Pathology and Adaptation, 39(5), pp. 782-810. ISSN 23984708

AbdulLateef, O; Sanmargaraja, S; Oni, O; Anavhe, P and Mewomo, C M (2024) An association rule mining model for the application of construction technologies during COVID-19. International Journal of Construction Management, 24(4), pp. 443-453. ISSN 1562-3599

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Abotaleb, I S and El-Adaway, I H (2018) First attempt toward a holistic understanding of the interdependent rippled impacts associated with out-of-sequence work in construction projects: System dynamics modeling approach. Journal of Construction Engineering and Management, 144(9): 04018084, ISSN 0733-9364

Abubakar, M E; Hasan, A and Jha, K N (2022) Delays and financial implications of COVID-19 for contractors in irrigation projects. Journal of Construction Engineering and Management, 148(9): 05022006, ISSN 0733-9364

Abudayyeh, O; Federicks, T; Palmquist, M and Torres, H N (2003) Analysis of occupational injuries and fatalities in electrical contracting industry. Journal of Construction Engineering and Management, 129(2), pp. 152-158. ISSN 0733-9364

Acar, E; Wall, J; McNamee, F; Carney, M and Öney-Yazici, E (2008) Innovative safety management training through e-learning. Architectural Engineering and Design Management, 4(3-4), pp. 239-250. ISSN 1745-2007

Acheampong, A; Adjei, E K; Asiedu, R O; Atibila, D W and Abu, I M A (2025) Evaluating the factors influencing artificial intelligence technology uptake in health and safety management within the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 2060-2081. ISSN 1726-0531

Adade-Boateng, A O; Fugar, F and Adinyira, E (2021) Framework to improve the attitudes of construction workers towards safety helmets. Journal of Construction in Developing Countries, 26(2), pp. 65-86. ISSN 1823-6499

Ade, R and Rehm, M (2021) Summertime comparative evaluation of indoor temperature and comfort in auckland New Zealand: A survey of green certified, code and older homes. Building Research & Information, 49(3), pp. 336-351. ISSN 0961-3218

Adebowale, O J and Agumba, J N (2024) A systematic review of challenges undermining the efficacy of construction health and safety regulations in major African countries. Construction Economics and Building, 24(4-5), pp. 1-24. ISSN 2204-9029

Adebowale, O J; Simpeh, F; Kukoyi, P O and Agumba, J N (2022) Assessment of basic measures instituted to curtail the spread of COVID-19 on construction sites in Lagos, Nigeria. Journal of Construction in Developing Countries, 27(2), pp. 43-61. ISSN 1823-6499

Adedokun, O and Egbelakin, T (2025) Understanding householders' perceptions of threats following the 2019/2020 black summer bushfires in Australia. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 209-223. ISSN 1759-5908

Adegoke, A S; Oladokun, T T; Ayodele, T O; Agbato, S E and Jinadu, A A (2022) DEMATEL method of analysing the factors influencing the decision to adopt virtual reality technology by real estate firms in Lagos property market. Smart and Sustainable Built Environment, 11(4), pp. 891-917. ISSN 2046-6099

Adekunle, T O (2015) Thermal performance of low-carbon prefabricated timber housing in the UK. PhD thesis, University of Kent, UK.

Adekunle, T O (2020) Occupants' comfort and stress indices in a structural timber school building in the Northeast US in different seasons. Building Research & Information, 48(3), pp. 331-348. ISSN 0961-3218

Adepu, N; Kermanshachi, S; Pamidimukkala, A and Nwakpuda, E (2025) An analytical approach to understanding construction cost overruns during COVID-19. Smart and Sustainable Built Environment, 14(6), pp. 1780-1794. ISSN 2046-6099

Adepu, N; Kermanshachi, S; Pamidimukkala, A and Nwakpuda, E (2026) Predicting construction schedule overruns during COVID-19 using ordinal logistic regression. International Journal of Building Pathology and Adaptation, 44(1), pp. 110-125. ISSN 2398-4708

Adepu, N (2023) Analysis of the impact of COVID-19 on construction cost and schedule overruns. PhD thesis, University of Texas at Arlington, USA.

Adjei, E A (2015) Multi-objective optimisation of building design variables and its impact on office building performance: a case for Ghana. PhD thesis, University of Nottingham, UK.

Adu Gyamfi, B and Shaw, R (2022) The impact of COVID-19 pandemic on public engagement approaches to disaster preparedness for foreign residents: Case of Tokyo metropolitan area, Japan. International Journal of Disaster Resilience in the Built Environment, 13(3), pp. 269-285. ISSN 1759-5916

Adu-Gyamfi, B; Ariyaningsih, A; Zuquan, H; Yamazawa, N; Kato, A and Shaw, R (2024) Reflections on science, technology and innovation on the aspirations of the Sendai framework for disaster risk reduction. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 289-302. ISSN 1759-5916

Afolabi, A; Yusuf, A and Akanmu, A (2025) Effect of a passive shoulder-support exoskeleton on muscle activity, range of motion, discomfort, and exertion during painting tasks. Journal of Construction Engineering and Management, 151(5): 04025027, ISSN 0733-9364

Afuye, O O; Oladimeji, O; Aina, O O; Tam, V W Y and Haddad, A N (2025) Factors influencing safety behaviours of construction tradesmen. International Journal of Construction Management, 25(4), pp. 375-384. ISSN 1562-3599

Aguilar, A J; de la Hoz-Torres, M L; Oltra-Nieto, L; Ruiz, D P and Martínez-Aires, M D (2022) Impact of COVID-19 protocols on IEQ and students' perception within educational buildings in southern Spain. Building Research & Information, 50(7), pp. 755-770. ISSN 0961-3218

Agyefi-Mensah, S; Kpamma, Z E and Hagan, D E (2022) Stair step geometry compliance with standard specifications for safety and usability: A study of selected university buildings in Ghana. International Journal of Building Pathology and Adaptation, 40(1), pp. 20-39. ISSN 23984708

Agyekum, K; Goodier, C and Oppon, J A (2022) Key drivers for green building project financing in Ghana. Engineering, Construction and Architectural Management, 29(8), pp. 3023-3050. ISSN 0969-9988

Agyekum, K; Kukah, A S and Amudjie, J (2022) The impact of COVID-19 on the construction industry in Ghana: The case of some selected firms. Journal of Engineering, Design and Technology, 20(1), pp. 222-244. ISSN 1726-0531

Ahmad, R K; Gibb, A G F and McCaffer, R (1998) Methodology to develop an effective safety performance measurement technique (spmt). In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Ahmed, S; Haq, I and Anam, S M A (2024) Impacts of COVID-19 on the construction sector in the least developed countries. International Journal of Building Pathology and Adaptation, 42(6), pp. 1085-1105. ISSN 2398-4708

Ahn, C R; Lee, S; Sun, C; Jebelli, H; Yang, K and Choi, B (2019) Wearable sensing technology applications in construction safety and health. Journal of Construction Engineering and Management, 145(11): 03119007, ISSN 0733-9364

Aidane, A (2021) Applying an equity lens to project stakeholder engagement: How organizations are embedding equitable stakeholder engagement in their project management processes. PhD thesis, Canterbury Christ Church University, UK.

Aigbavboa, C O; Aghimien, D O; Thwala, W D and Ngozwana, M N (2022) Unprepared industry meet pandemic: COVID-19 and the South Africa construction industry. Journal of Engineering, Design and Technology, 20(1), pp. 183-200. ISSN 1726-0531

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al Hosani, S (2022) A framework for the implementation of 'Lean' construction principles in Engineering, Procurement and Construction (EPC) in the oil and gas industry. PhD thesis, Aberystwyth University, UK.

Al-Ameen, H A (2012) Antitrust: the person-centred approach. PhD thesis, Swansea University, UK.

Al-Bayati, A J (2017) Managing workforce diversity in construction to improve communication and reduce fatalities (Hispanic workforce focus). PhD thesis, Western Michigan University, USA.

Al-Bayati, A J (2019) Satisfying the need for diversity training for Hispanic construction workers and their supervisors at US construction workplaces: A case study. Journal of Construction Engineering and Management, 145(6): 05019007, ISSN 0733-9364

Al-Bayati, A J; Abudayyeh, O; Fredericks, T and Butt, S E (2017) Reducing fatality rates of the Hispanic workforce in the U.S. Construction industry: Challenges and strategies. Journal of Construction Engineering and Management, 143(3): 04016105, ISSN 0733-9364

Al-Khiami, M. I. and Lindhard, Sø M. (2026) On-site evaluation of back-support exoskeleton effectiveness in construction: A multiple case study of physical performance, ergonomic comfort, and user acceptance among masonry workers. Journal of Construction Engineering and Management, 152(10): 04026167, ISSN 0733-9364

Al-Khiami, M I; Lindhard, S M and Wandahl, S (2025) Paradox in practice: Work-related musculoskeletal disorder prevalence and reporting among construction workers in Kuwait and Denmark. Journal of Construction Engineering and Management, 151(7): 04025078, ISSN 0733-9364

Al-Maiyah, S; Brett Martinson, D and Elkadi, H (2024) Evaluation of the indoor environment in a historic museum during the COVID-19 lockdown in Northwest England. Building Research & Information, 52(7), pp. 748-764. ISSN 0961-3218

Al-Mhdawi, M K S (2022) Risk management of construction projects under extreme conditions: a case study of Iraq. PhD thesis, University of Southampton, UK.

Al-Mhdawi, M K S; Brito, M; Onggo, B S; Qazi, A and O'Connor, A (2024) COVID-19 emerging risk assessment for the construction industry of developing countries: Evidence from Iraq. International Journal of Construction Management, 24(7), pp. 693-706. ISSN 1562-3599

Al-Mhdawi, M K S; Brito, M; Onggo, B S; Qazi, A; O'Connor, A and Namian, M (2023) Construction risk management in Iraq during the COVID-19 pandemic: Challenges to implementation and efficacy of practices. Journal of Construction Engineering and Management, 149(9): 04023086, ISSN 0733-9364

Al-Nammari, F and Alhanbali, F (2025) Housing adaptations for COVID-19 lockdowns in Amman and policy implications. Building Research & Information, 53(5), pp. 600-619. ISSN 0961-3218

Al-Tarazi, D.; Alkhamaiseh, M.; Sara, R.; Rice, L. and Booth, C. A. (2026) Insights of residents' satisfaction and well-being associated with the architectural design of domestic buildings. Journal of Engineering, Design and Technology, 24(1), pp. 151-170. ISSN 1726-0531

AlTalhoni, A; Alwashah, Z; Liu, H; Abudayyeh, O; Kwigizile, V and Kirkpatrick, K (2026) Data-driven identification of key pricing factors in highway construction cost estimation during economic volatility. International Journal of Construction Management, 26(1), pp. 152-167. ISSN 1562-3599

Aladağ, H and Işık, Z (2019) Design and construction risks in BOT type mega transportation projects. Engineering, Construction and Architectural Management, 26(10), pp. 2223-2242. ISSN 0969-9988

Alajmani, H; Ahmed, S and El-Sayegh, S M (2024) Factors causing delays in the UAE construction industry amid the covid-19 pandemic. Journal of Financial Management of Property and Construction, 29(1), pp. 135-151. ISSN 1366-4387

Alasmari, H; Chrisp, M T and Bowles, G (2012) A framework for enhancing and improving the safety culture on Saudi construction sites. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Albeaino, G; Brophy, P; Jeelani, I; Gheisari, M and Issa, R R A (2023) Impact of drone presence on construction individuals working at heights. Journal of Construction Engineering and Management, 149(11): 04023119, ISSN 0733-9364

Albeiro Alberto Aguilar, O and Saúl Tomás Salas, S (2021) Good practices of labor welfare and environmental protection in potato crops in Colombia: A way to contribute to the sustainable development of colombian agriculture. Smart and Sustainable Built Environment, 10(1), pp. 51-66. ISSN 2046-6099

Alexander, D; Hallowell, M and Gambatese, J (2017) Precursors of construction fatalities. I: Iterative experiment to test the predictive validity of human judgment. Journal of Construction Engineering and Management, 143(7): 04017023, ISSN 0733-9364

Alexander, D; Hallowell, M and Gambatese, J (2017) Precursors of construction fatalities. II: Predictive modeling and empirical validation. Journal of Construction Engineering and Management, 143(7): 04017024, ISSN 0733-9364

Alharbi, R (2024) An appraisal of the early impact of COVID-19 on affordable housing finance in Saudi Arabia's Vision 2030. International Journal of Building Pathology and Adaptation, 42(4), pp. 751-767. ISSN 23984708

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Ali, N (2018) A framework for designing energy efficient dwellings satisfying socio-cultural needs in hot climates. PhD thesis, De Montfort University, UK.

Aliasgari, R; Fan, C; Li, X; Golabchi, A and Hamzeh, F (2024) MOCAP and ai-based automated physical demand analysis for workplace safety. Journal of Construction Engineering and Management, 150(7): 04024060, ISSN 0733-9364

Aliu, J; Oke, A E; Oluwasogo Oyediran, A; Kanya, R A and Ukaha Onyeukwu, S (2026) From isolation to interaction: Evaluating social media awareness and adoption in a developing construction industry. Smart and Sustainable Built Environment, 15(1), pp. 273-293. ISSN 2046-6099

Aljassmi, H; Han, S and Davis, S (2014) Project pathogens network: New approach to analyzing construction-defects- generation mechanisms. Journal of Construction Engineering and Management, 140(1): 04013028, ISSN 0733-9364

Aljassmi, H; Han, S and Davis, S (2016) Analysis of the complex mechanisms of defect generation in construction projects. Journal of Construction Engineering and Management, 142(2): 04015063, ISSN 0733-9364

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects generation in construction projects. PhD thesis, University of New South Wales, Australia.

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects. PhD thesis, University of New South Wales, Australia.

Alkhaldi, M (2019) Impact of human errors on accidents in the oil and gas industry in Bahrain. PhD thesis, University of Salford, UK.

Alkoud, S. and Qatamin, L. (2025) Global trends and future directions of virtual teams in the workplace: A bibliometric analysis. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 179(2), pp. 108-115. ISSN 1751-4304

Allen, D; Hartley, R; Whitehead, P; Smith, M; Dickinson, I and Gorse, C (2010) The potential for using interactive scenarios in the teaching and learning of health and safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Almomani, A Q M; Almeida, R M S F; Vicente, R and Barreira, E (2025) Long-term monitoring of thermal comfort in three apartments in Jordan. Building Research & Information, 53(8), pp. 965-982. ISSN 0961-3218

Alsamadani, R; Hallowell, M R; Javernick-Will, A and Cabello, J (2013) Relationships among language proficiency, communication patterns, and safety performance in small work crews in the United States. Journal of Construction Engineering and Management, 139(9), pp. 1125-1134. ISSN 0733-9364

Alsharef, A F A (2022) Leveraging data analytics to improve construction operations and occupational safety. PhD thesis, North Carolina State University, USA.

Altalhoni, A; Liu, H; Abudayyeh, O; Kwigizile, V; Huang, W C and Kirkpatrick, K (2025) Robust forecasting models for highway construction cost indices during pandemic-era inflation. Journal of Construction Engineering and Management, 151(8): 04025101, ISSN 0733-9364

Althaqafi, Torky (2015) Using stakeholder theory to explain the development and operation of safety culture and systems to improve safety performance in the construction industry in Saudi Arabia. PhD thesis, University of Adelaide, Australia.

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Amadi, A and Higham, A (2016) Geotechnical characterization of cost overrun drivers in highway projects: Predicated on heterogeneous ground conditions in the Niger delta region of Nigeria. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Amadi, A I (2016) Explaining cost overruns in highway projects: a geo-spatial regression modelling and cognitive mapping of latent pathogens and contextual drivers. PhD thesis, University of Salford, UK.

Amadi, A I and Higham, A (2017) Latent geotechnical pathogens inducing cost overruns in highway projects. Journal of Financial Management of Property and Construction, 22(3), pp. 269-285. ISSN 1366-4387

Amin, F; Poespito Hadi, W; Zauhar, S and Santoso Haryono, B (2022) Determinants of post COVID-19 food security policy success. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 440-450. ISSN 1759-5916

Amoah, C and Le Roux, L (2025) Students' challenges with online remote teaching and learning in South Africa. International Journal of Construction Education and Research, 21(4), pp. 533-553. ISSN 1557-8771

Amoah, C; Bamfo-Agyei, E and Simpeh, F (2022) The COVID-19 pandemic: The woes of small construction firms in Ghana. Smart and Sustainable Built Environment, 11(4), pp. 1099-1115. ISSN 2046-6099

Amoo, O; Lukman, Y and Musa, N (2022) Dispute resolution methods adopted by contractors during COVID-19 in eastern cape South Africa: A case study. Journal of Construction Business and Management, 5(2), pp. 54-67. ISSN 2521-0165

Anderson, B and James, P (2021) Covid-19 lockdown: Impacts on gb electricity demand and CO2 emissions. Buildings & Cities, 2(1), pp. 134-149. ISSN 2632-6655

Antwi-Afari, M F; Li, H; Edwards, D J; Pärn, E A; Owusu-Manu, D G; Seo, J and Wong, A Y L (2018) Identification of potential biomechanical risk factors for low back disorders during repetitive rebar lifting. Construction Innovation, 18(2), pp. 206-226. ISSN 1471-4175

Antwi-Afari, M F; Li, H; Edwards, D J; Pärn, E A; Seo, J and Wong, A (2017) Effects of different weights and lifting postures on balance control following repetitive lifting tasks in construction workers. International Journal of Building Pathology and Adaptation, 35(3), pp. 247-263.

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W; Mehmood, I and Wong, A Y L (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29(9), pp. 3415-3438. ISSN 0969-9988

Apu, N and Das, U (2020) Tectonics and earthquake potential of Bangladesh: A review. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 295-307. ISSN 1759-5916

Arai, K and Morimoto, E (2021) What is required for recovering from disaster: Theoretical and empirical verification. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Arboleda, C A and Abraham, D M (2004) Fatalities in trenching operations-analysis using models of accident causation. Journal of Construction Engineering and Management, 130(2), pp. 273-280. ISSN 0733-9364

Arewa, A and Farrell, P (2012) A review of compliance with health and safety regulations and economic performance in small and medium construction enterprises. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Arewa, A O (2014) An empirical analysis of commitment to health and safety and its effect on the profitability of UK Construction SMEs. PhD thesis, University of Bolton, UK.

Arijeloye, B T; Aje, I O and Oke, A E (2024) Evaluating the key risk factors in PPP-procured mass housing projects in Nigeria: A Delphi study of industry experts. Journal of Engineering, Design and Technology, 22(1), pp. 60-76. ISSN 1726-0531

Armin, H.; Ahmadi Marzaleh, M.; Shojaei, P.; Jahangiri, M.; Hosseinekhah, H. and Peyravi, M. (2026) Urban resilience assessment: A best-worst method for component prioritization. International Journal of Disaster Resilience in the Built Environment, 17(4), pp. 469-491. ISSN 1759-5908

Aroke, O; Hasanzadeh, S; Esmaeili, B; Dodd, M D and Brock, R (2022) Using worker characteristics, personality, and attentional distribution to predict hazard identification performance: A moderated mediation analysis. Journal of Construction Engineering and Management, 148(6): 04022033, ISSN 0733-9364

Aroke, O M (2022) Measuring attention, working memory and visual perception to reduce the risk of injuries in the construction industry. PhD thesis, George Mason University, USA.

Arslan, M; Cruz, C; Roxin, A M and Ginhac, D (2018) Spatio-temporal analysis of trajectories for safer construction sites. Smart and Sustainable Built Environment, 7(1), pp. 80-100. ISSN 2046-6099

Artis, S (2007) The effects of perceived organizational support on training and safety in Latino and non-Latino construction workers. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Artpairin, A and Pinmanee, S (2023) Critical success factors in the management of petrochemical construction projects for contractors and subcontractors during the COVID-19 pandemic. International Journal of Construction Management, 23(11), pp. 1956-1968. ISSN 1562-3599

Aslam, A; Rana, I A and Bhatti, S S (2022) Local climate zones and its potential for building urban resilience: A case study of lahore, Pakistan. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 248-265. ISSN 1759-5916

Assaad, R and El-Adaway, I H (2021) Determining critical combinations of safety fatality causes using spectral clustering and computational data mining algorithms. Journal of Construction Engineering and Management, 147(5): 04021035, ISSN 0733-9364

Attah, A (2019) The relationship between information quality and construction safety. PhD thesis, Walden University, USA.

Aunwong, P and Hadikusumo, B H W (2025) Digital 2D and 3D modelling for construction safety management in Thai construction projects. International Journal of Construction Management, 25(15), pp. 1778-1790. ISSN 1562-3599

Awolusi, I G (2017) Active construction safety leading indicator data collection and evaluation. PhD thesis, University of Alabama, USA.

Ayat, M; Qureshi, S M and Kang, C (2025) The moderating role of emerging technologies on the impact of coronavirus disease 2019 and the performance of construction projects: The case of Pakistan. Journal of Engineering, Design and Technology, 23(1), pp. 21-50. ISSN 1726-0531

Aydinli, S (2024) Impact of unexpected conditions on construction cost forecasting performance: evidence from Europe. Construction Management and Economics, 42(9), pp. 787-801. ISSN 01446193

Ayhan, B U and Tokdemir, O B (2020) Accident analysis for construction safety using latent class clustering and artificial neural networks. Journal of Construction Engineering and Management, 146(3): 04019114, ISSN 0733-9364

Babalola, A; Manu, P; Cheung, C; Yunusa-Kaltungo, A; Bartolo, P; Gao, S and Perera, S (2022) Applications of immersive technologies for occupational safety and health management in the construction industry: A systematic review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Badra, N; Hegazy, H; Zhang, J; Yahia, M; Fathy, M and AboulHaggag, S (2025) Application of fuzzy multi-objective model for crashing the construction of steel structure projects post-pandemic (Covid-19). International Journal of Construction Management, 25(3), pp. 363-374. ISSN 1562-3599

Bai, Y; Burkett, W R and Nash, P T (2006) Lessons learned from an emergency bridge replacement project. Journal of Construction Engineering and Management, 132(4), pp. 338-344. ISSN 0733-9364

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Balasubramanian, V and Prasad, G S (2007) Manual bar bending-an occupational hazard for construction workers in developing nations. Journal of Construction Engineering and Management, 133(10), pp. 791-797. ISSN 0733-9364

Baldursdottir, N and Ottosson, E (2012) Managing change through participation: Developing shared construction guidelines in 26 public organisations. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bannholzer, Dominic (2020) Leerstellenmanagement in der planung und steuerung des change-managements von bautechnologieunternehmen: Eine generelle explikation, wie die autopoietische fähigkeit von unternehmen durch lücken im veränderungsprozess positiv potenziert werden kann. PhD thesis, Middlesex University, UK.

Bao, S; Bu, H and Rui, N (2025) Computer vision-based recognition of spatial relevance between engineering vehicles and workers for monitoring struck-by accidents. Journal of Construction Engineering and Management, 151(11): 04025163, ISSN 0733-9364

Baradan, S and Usmen, M A (2006) Comparative injury and fatality risk analysis of building trades. Journal of Construction Engineering and Management, 132(5), pp. 533-539. ISSN 0733-9364

Barontini, A (2021) Bio-inspired algorithms for structural health monitoring of civil engineering systems. PhD thesis, Universidade do Minho, Portugal.

Barry, S; Cronin, W; Spillane, J P and Bradley, J G (2021) Compliance with COVID-19 regulations in micro-enterprises and SMEs in the Irish construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Bascoul, A M (2017) Managing project structural complexity by integrating facility management in planning, designing, and execution of high-end facility upgrades. PhD thesis, University of California, Berkeley, USA.

Bastian-Pinto, C. L.; Brandão, L. E.; Stanganello, A.; Pellegrino, R. and Marques, N. L. (2026) Assessing the role of term extension clauses in mitigating disruptive events in infrastructure concessions. Construction Management and Economics, 44(6), pp. 412-429. ISSN 0144-6193

Bayhan, H G (2025) Transaction costs in construction project team communications: Language model and network science applications. PhD thesis, Michigan State University, USA.

Bayona, A; Hallowell, M R and Bhandari, S (2024) The things that hurt people are not the same as the things that kill people: Key differences in the proximal causes of low- and high-severity construction injuries. Journal of Construction Engineering and Management, 150(8): 04024089, ISSN 0733-9364

Bayona, A; Hallowell, M R; Bhandari, S; Moyen, N and Lien, A (2025) Impact of energy-based safety training on quality of prejob safety meetings and control of hazardous energy in construction: Multiple baseline experiment. Journal of Construction Engineering and Management, 151(7): 04025086, ISSN 0733-9364

Beavers, J E; Moore, J R; Rinehart, R and Schriver, W R (2006) Crane-related fatalities in the construction industry. Journal of Construction Engineering and Management, 132(9), pp. 901-910. ISSN 0733-9364

Beavers, J E; Moore, J R and Schriver, W R (2009) Steel erection fatalities in the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 227-234. ISSN 0733-9364

Beh, H J; Rashidi, A; Talei, A and Lee, Y S (2022) Developing engineering students' capabilities through game-based virtual reality technology for building utility inspection. Engineering, Construction and Architectural Management, 29(7), pp. 2854-2877. ISSN 0969-9988

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Behm, M and Schneller, A (2013) Application of the Loughborough construction accident causation model: A framework for organizational learning. Construction Management and Economics, 31(6), pp. 580-595. ISSN 1466433X

Bentil, K K (1990) A model approach for predicting commercial construction site accidents. PhD thesis, University of Florida, USA.

Bernal, D M; Laitinen, J; Shevchenko, H; Ivanova, O; Pelsmakers, S and Nisonen, E (2026) Spatial (in)justice shaping the home as a space of work. Buildings & Cities, 7(1), pp. 161-175. ISSN 2632-6655

Bertero, R D (2014) Great 2010 American earthquakes: Lessons for seismic design and construction. Journal of Construction Engineering and Management, 140(4): B4013003, ISSN 0733-9364

Bhandari, S; Hallowell, M R; Alruqi, W and Salas, R (2021) Modeling the relationship between personal risk tolerance, work-related risk tolerance, and risk-taking behavior of construction workers. Journal of Construction Engineering and Management, 147(4), ISSN 0733-9364

Bisola, T (2024) Business modelling for cloud-based building information modelling (cbim). DE thesis, Technische Universitaet Berlin, Germany.

Biswas, A (2019) Exploring Indian post-disaster temporary housing strategy through a comparative review. International Journal of Disaster Resilience in the Built Environment, 10(1), pp. 14-35. ISSN 1759-5916

Blackmon, R B and Gramopadhye, A K (1995) Improving construction safety by providing positive feedback on backup alarms. Journal of Construction Engineering and Management, 121(2), pp. 166-171. ISSN 0733-9364

Blanc, F and Scanlon, K (2022) Sharing a home under lockdown in London. Buildings & Cities, 3(1), pp. 118-133. ISSN 2632-6655

Boamah, F A; Zhang, J; Shehzad, M U; Sherani, S and Wen, D (2024) Exploring the impact of social capitals and knowledge creation on construction firms performance in the COVID-19 era. Journal of Engineering, Design and Technology, 22(2), pp. 404-421. ISSN 1726-0531

Boateng, E B (2021) The role of human safety interventions on co-workers’ safety outcomes in construction projects. PhD thesis, University of Newcastle, Australia.

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Bordass, B; Pender, R; Steele, K and Graham, A (2025) Learning to sail a building: A people-first approach to retrofit. Buildings & Cities, 6(1), pp. 378-397. ISSN 2632-6655

Borg, N; Scott-Young, C M; Naderpajouh, N and Borg, J (2023) Surviving adversity: Personal and career resilience in the AEC industry during the COVID-19 pandemic. Construction Management and Economics, 41(5), pp. 361-378. ISSN 01446193

Borgeson, S and Brager, G (2011) Comfort standards and variations in exceedance for mixed-mode buildings. Building Research & Information, 39(2), pp. 118-133. ISSN 0961-3218

Borthwick, F and McAndrew, P (2012) Cultural interpretation of health and safety and its appropriateness in the United Arab Emirates. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bowen, P; Govender, R and Edwards, P (2018) Determinants of aids knowledge among construction workers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Bowen, P; Govender, R; Edwards, P and Cattell, K (2016) Demographic and lifestyle determinants of the HIV serostatus of construction workers. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Bowen, P A; Govender, R; Edwards, P J and Cattell, K (2014) An integrated model of HIV/AIDS testing behaviour in the construction industry. Construction Management and Economics, 32(11), pp. 1106-1129. ISSN 01446193

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Briggs, B (2021) An improved earned value management method integrating quality and safety. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Brockman, J L (2014) Interpersonal conflict in construction: Cost, cause, and consequence. Journal of Construction Engineering and Management, 140(2): 04013050, ISSN 0733-9364

Budayan, C; Koc, K; Erk, E Y and Tokdemir, O B (2025) Uncovering value creation factors for healthcare public-private partnership (PPP) projects. Engineering, Construction and Architectural Management, 32(8), pp. 5456-5483. ISSN 0969-9988

Bugg, R; Collins, W and Gilbert, C (2018) Applying radio frequency identification tags to improve personnel safety in dredging construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Burrell, P A (2017) Structural errors and failures in construction: is knowledge hidden? PhD thesis, Anglia Ruskin University, UK.

Bust, P D (2011) Changing occupational health and safety practices in the manual handling of highway kerbs: cultural impediments and obstacles to innovation. PhD thesis, Loughborough University, UK.

Cades, A-P (2018) Influence of psychological capital and thinking perspectives on construction safety climate and performance. PhD thesis, Walden University, USA.

Cai, J (2020) Data-driven approach to holistic situational awareness in construction site safety management. PhD thesis, Purdue University, USA.

Cai, S and Gou, Z (2023) Synchronization of water-energy consumption in residential and non-residential buildings during COVID-19. Building Research & Information, 51(6), pp. 682-700. ISSN 0961-3218

Cakan, H (2012) Analysis and modeling of roofer and steel worker fall accidents. PhD thesis, Wayne State University, USA.

Cakan, H; Kazan, E and Usmen, M (2014) Investigation of factors contributing to fatal and non-fatal roofer fall accidents. International Journal of Construction Education and Research, 10(4), pp. 300-317. ISSN 1557-8771

Calvetti, D (2021) Electronic productivity performance monitoring of construction workers. PhD thesis, Universidade do Porto, Portugal.

Camacho-Montano, S C; Cook, M and Wagner, A (2020) Avoiding overheating in existing school buildings through optimized passive measures. Building Research & Information, 48(4), pp. 349-363. ISSN 0961-3218

Campbell, J M (2008) Safety hazard and risk identification and management in infrastructure management. PhD thesis, University of Edinburgh, UK.

Carney, M; Wall, J; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E and Önwy-Yazici, E (2008) Challenges to delivering safety training through virtual classes. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Carter, A (2022) Perceptions of construction trade careers amid a growing labor shortage: An exploratory study. PhD thesis, Wilmington University (Delaware), USA.

Casady, C B and Baxter, D (2020) Pandemics, public-private partnerships (PPPs), and force majeure: COVID-19 expectations and implications. Construction Management and Economics, 38(12), pp. 1077-1085. ISSN 01446193

Casanovas-Rubio, M D M; Armengou, J and Ramos, G (2014) Occupational risk index for assessment of risk in construction work by activity. Journal of Construction Engineering and Management, 140(1): 04013035, ISSN 0733-9364

Castelblanco, G; Guevara, J and De Marco, A (2024) Crisis management in public–private partnerships: Lessons from the global crises in the xxi century. Built Environment Project and Asset Management, 14(1), pp. 56-73. ISSN 2044-124X

Castelblanco, G; Narbaev, T; Osei-Kyei, R; Serikbay, D; Mukashev, Y and Guevara, J (2025) Pandemic risks in PPPs: comparative analysis within developing countries. International Journal of Construction Management, 25(4), pp. 456-468. ISSN 1562-3599

Castro, L; De Vecchi, R and Lamberts, R (2025) Design process for an occupant survey system to assess satisfaction with indoor environmental quality. Building Research & Information, 53(1-2), pp. 242-260. ISSN 0961-3218

Chambers, M L (2021) Fine particulate air pollution and accident risk: Three essays. PhD thesis, Vanderbilt University, USA.

Chammout, B; El-Adaway, I H; Abdul Nabi, M and Assaad, R H (2024) Price escalation in construction projects: Examining national and international contracts. Journal of Construction Engineering and Management, 150(9): 04024109, ISSN 0733-9364

Chan, A P C; Wong, F K W; Chan, D W M; Yam, M C H; Kwok, A W K; Lam, E W M and Cheung, E (2008) Work at height fatalities in the repair, maintenance, alteration, and addition works. Journal of Construction Engineering and Management, 134(7), pp. 527-535. ISSN 0733-9364

Chan, A P C; Yang, Y and Darko, A (2018) Construction accidents in a large-scale public infrastructure project: Severity and prevention. Journal of Construction Engineering and Management, 144(10): 05018010, ISSN 0733-9364

Chan, M (2011) Fatigue: The most critical accident risk in oil and gas construction. Construction Management and Economics, 29(4), pp. 341-353. ISSN 1466433X

Chan, P L (2004) Critical success factors for delivering healthcare projects in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chang, Y P (2020) Construction worker safety and accident prevention in Taiwan. PhD thesis, University of Bristol, UK.

Chapman, R and Howden-Chapman, P (2021) Does reframing urban policy around wellbeing support carbon mitigation? Buildings & Cities, 2(1), pp. 688-699. ISSN 2632-6655

Charlson, J (2021) Emerging trends in construction law at the confluence of academia and industry. PhD thesis, University of Wolverhampton, UK.

Charuvil Elizabeth, R M; Sattari, F; Lefsrud, L and Gue, B (2025) Reducing serious injuries and fatalities in industrial construction-application of machine learning to analyze emotional intelligence and psychosocial factors. International Journal of Construction Management, 25(12), pp. 1404-1414. ISSN 1562-3599

Cheah, C Y J (2007) Construction safety and health factors at the industry level: The case of Singapore. Journal of Construction in Developing Countries, 12(2), pp. 81-99. ISSN 1823-6499

Chellappa, V and Salve, U R (2025) Exploring causes of falls and preventive measures in vertical formwork operations in Indian construction. Built Environment Project and Asset Management, 15(6), pp. 1089-1105. ISSN 2044-124X

Chellappa, V and Gunasekaran, A L (2022) Drivers for implementing design for safety in construction: A review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 39-49. ISSN 17514304

Chen, D; Zhou, J; Duan, P and Zhang, J (2023) Integrating knowledge management and BIM for safety risk identification of deep foundation pit construction. Engineering, Construction and Architectural Management, 30(8), pp. 3242-3258. ISSN 0969-9988

Chen, S; Zeng, N; Li, F; Yue, H; Wang, Q and Li, Q (2025) Proactive safety risk control system for deep foundation pit construction: Situational tailoring of integrated cybernetics and dual-system theory. Journal of Construction Engineering and Management, 151(4): 04025018, ISSN 0733-9364

Chen, T Y-J (2019) Advancing quantitative risk analysis for critical water infrastructure. PhD thesis, University of Michigan, USA.

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Chen, Z; Chen, K and Cheng, J C P (2023) ISM-based analysis of VR-AEC adoption barriers and their inner mechanisms. Engineering, Construction and Architectural Management, 30(9), pp. 4271-4293. ISSN 0969-9988

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y.; Vu, Q. T. and Yang, L. K. (2026) Multidimensional fall risk assessment for the real-time monitoring of construction site worker safety. International Journal of Construction Management, 26(7), pp. 1191-1221. ISSN 1562-3599

Cheung, C; Muchoki, L; Jin, R; Adamu, Z; Chi, N W and Lin, J C (2023) A systematic review of digitalisation adoptions in construction safety education and training. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Chiang, Y H; Wong, F K W and Liang, S (2018) Fatal construction accidents in Hong Kong. Journal of Construction Engineering and Management, 144(3): 04017121, ISSN 0733-9364

Chigara, B (2018) Integrating sustainability principles in construction health and safety management practices in Zimbabwe. PhD thesis, Nelson Mandela University, South Africa.

Chigara, B and Moyo, T (2022) Factors affecting the delivery of optimum health and safety on construction projects during the covid-19 pandemic in Zimbabwe. Journal of Engineering, Design and Technology, 20(1), pp. 24-46. ISSN 1726-0531

Chigara, B and Moyo, T (2023) The impact of COVID-19 on the construction sector in Zimbabwe. Journal of Construction in Developing Countries, 28(1), pp. 91-111. ISSN 1823-6499

Choi, S D (2008) Postural balance and adaptations in transitioning sloped surfaces. International Journal of Construction Education and Research, 4(3), pp. 189-199. ISSN 1557-8771

Chua, D K H and Goh, Y M (2004) Incident causation model for improving feedback of safety knowledge. Journal of Construction Engineering and Management, 130(4), pp. 542-551. ISSN 0733-9364

Chua, D K H and Goh, Y M (2005) Poisson model of construction incident occurrence. Journal of Construction Engineering and Management, 131(6), pp. 715-722. ISSN 0733-9364

Clawson, Bobie Sue Anna (2024) The influence of walking surface types on gait parameters, kinematics and worker perceptions in relation to slips, trips, and fall incidents in the construction industry. PhD thesis, Indiana University of Pennsylvania, USA.

Cloete, Brent; Agumba, Justus; Adebowale, Oluseyi Julius and Meyer, Chris (2026) From readiness to implementation: A framework for BIM adoption in facilities management organisations. Journal of Construction Business and Management, 8(2), pp. 43-53. ISSN 2521-0165

Cocerhan, I and Bradley, J (2019) Investigation into how technology can overcome language barriers experienced by construction workers from eastern Europe on sites in London. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Cutcu, I; Atay, G and Gerlikhan, S G (2024) How the consequences of the COVID-19 pandemic affected housing sector? Empirical evidence from Turkey. Engineering, Construction and Architectural Management, 31(8), pp. 3050-3068. ISSN 0969-9988

Da Silva, W O P; Farias, B A; Monteiro, I B; Pegorini, V; Casanova, D and Bisconsini, D R (2024) Development of global quality index of unpaved roads. Journal of Construction Engineering and Management, 150(1): 04023147, ISSN 0733-9364

Dabash, M S (2022) Applications of computer vision to improve construction site safety and monitoring. PhD thesis, University of Delaware, USA.

Daniel, E I; Oshodi, O S and Marte Gomez, J (2025) Developing future skills for the engineering sector: evidence from the UK. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(2), pp. 65-75. ISSN 17514304

Darragh, A J R (2001) Patterns of injury among residential construction workers before and after a safety intervention program, 1994-1998. PhD thesis, Colorado State University, USA.

Datta, S D; Akter, J; Rhyme, A N; Mamun, M A; Rana, M J and Abdullah, M S (2025) Assessing and mitigating building fire risk based on the scenario clusters in Bangladesh. International Journal of Construction Management, 25(12), pp. 1381-1394. ISSN 1562-3599

Dauda, J A; Ajayi, S; Omotayo, T; Oladiran, O O and Ilori, O M (2024) Implementation of lean for small- and medium-sized construction organisational improvement. Smart and Sustainable Built Environment, 13(3), pp. 496-511. ISSN 2046-6099

Day, K and Martel, A (2021) Designing for neurodiversity: Reimagining the home for a COVID normal life. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

De Silva, N; Rathnayake, U and Kulasekera, K M U B (2018) Under-reporting of construction accidents in Sri Lanka. Journal of Engineering, Design and Technology, 16(6), pp. 850-868. ISSN 1726-0531

Deep, S; Joshi, R and Patil, S (2023) Identifying the contractor's core competencies in post-COVID-19 scenario: Developing a survey instrument. Engineering, Construction and Architectural Management, 30(9), pp. 3781-3797. ISSN 0969-9988

Deep, S; Sonkar, N; Yadav, P; Vishnoi, S; Bhoola, V and Kumar, A (2024) Factors influencing the mental health of white-collar construction workers in developing economies: Analytical study during the COVID-19 pandemic in India. Journal of Construction Engineering and Management, 150(7): 04024058, ISSN 0733-9364

Denny-Smith, G (2021) How compliance imperatives stifle the impact of social procurement. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Denny-Smith, George (2022) The social value of indigenous procurement policies in the Australian construction industry. PhD thesis, University of New South Wales, Australia.

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Dey, A; Islam, S T; Paul, B; Bandyopadhyay, S; Sengupta, P; Sanyal, N; Mondal, K P; Jubaer, A and Mitra, R (2022) Waterlogging mitigation and safe water supply: Lessons learnt from low-lying areas of basirhat municipality, India. International Journal of Disaster Resilience in the Built Environment, 13(3), pp. 386-403. ISSN 1759-5916

Dickson, R (2023) What's it going to take? Lessons learned from COVID-19 and worker mental health in the Australian construction industry. Construction Management and Economics, 41(9), pp. 758-780. ISSN 01446193

Din, Z U (2017) Teaching prevention through design (PTD) principles using a non-traditional pedagogical strategy. PhD thesis, Arizona State University, USA.

Dolphin, W S Y; Alshami, A A M; Tariq, S; Boadu, V; Mohandes, S R; Ridwan, T and Zayed, T (2023) Effectiveness of policies and difficulties in improving safety performance of repair, maintenance, minor alteration, and addition works in Hong Kong. International Journal of Construction Management, 23(5), pp. 814-829. ISSN 1562-3599

Donato, Matteo (2016) The influence of resource dependency on collaboration in the construction supply chain. PhD thesis, Victoria University, Australia.

Dong, S.; Xu, S. and Zhang, Y. (2026) Understanding the factors influencing work-life conflict in construction practitioners: A meta-analysis study. International Journal of Building Pathology and Adaptation, 44(3), pp. 567-582. ISSN 2398-4708

Dong, H (2024) Impact of sensing and occupancy parameters to achieve comfort and demand side management in buildings. PhD thesis, Michigan State University, USA.

Du Toit, G J (1997) The potential of labour-intensive construction methods in the provision of urban infrastructure. PhD thesis, University of Pretoria, South Africa.

Duan, P; Zhou, J and Tao, S (2023) Risk events recognition using smartphone and machine learning in construction workers' material handling tasks. Engineering, Construction and Architectural Management, 30(8), pp. 3562-3582. ISSN 0969-9988

Duggan, G P; Bauleo, P; Authier, M; Aloise-Young, P A; Care, J and Zimmerle, D (2023) Electricity consumption in commercial buildings during COVID-19. Buildings & Cities, 4(1), pp. 851-866. ISSN 2632-6655

Dumbuya, B and Nirupama, N (2017) Disasters and long-term economic sustainability: A perspective on Sierra Leone. International Journal of Disaster Resilience in the Built Environment, 8(1), pp. 58-76. ISSN 1759-5916

Duong, A. T. B.; Ta, T. D.; Truong, D. Q.; Hoang, T. G.; Pham, H.; Hoang, T. H. and Truong Quang, H. (2026) Direct and indirect effect of risk on construction supply chain in disruption era: A service-oriented view. Engineering, Construction and Architectural Management, 33(4), pp. 2995-3024. ISSN 0969-9988

Ebekozien, A; Aigbavboa, C and Aigbedion, M (2023) Construction industry post-COVID-19 recovery: Stakeholders perspective on achieving sustainable development goals. International Journal of Construction Management, 23(8), pp. 1376-1386. ISSN 1562-3599

Ebekozien, A; Aigbavboa, C; Samsurijan, M S; Radin Firdaus, R B and Rohayati, M I (2024) Investigating safety violations on Nigerian construction sites. International Journal of Construction Management, 24(13), pp. 1454-1464. ISSN 1562-3599

Ebiloma, D O (2024) A digital twin maintenance management model for public hospital buildings in Nigeria. PhD thesis, University of Johannesburg, South Africa.

Ed Koehn, E; Kothari, R K and Pan, C S (1995) Safety in developing countries: Professional and bureaucratic problems. Journal of Construction Engineering and Management, 121(3), pp. 261-265. ISSN 0733-9364

Ege, D N; Aalto, P and Steinert, M (2024) People, space use and objects: an UWB-based quantifying approach for post-occupancy evaluation of new architectural spaces. Engineering, Construction and Architectural Management, 31(13), pp. 271-284. ISSN 0969-9988

Egwim, C N; Alaka, H; Pan, Y; Balogun, H; Ajayi, S; Hye, A and Egunjobi, O O (2025) Ensemble of ensembles for fine particulate matter pollution prediction using big data analytics and IoT emission sensors. Journal of Engineering, Design and Technology, 23(2), pp. 640-665. ISSN 1726-0531

Ehsanifar, M and Hemesy, M (2021) A new hybrid multi-criteria decision-making model to prioritize risks in the construction process under fuzzy environment (case study: The Valiasr Street Underpass Project). International Journal of Construction Management, 21(5), pp. 508-523. ISSN 1562-3599

Ekanayake, E M A C; Shen, G; Kumaraswamy, M and Owusu, E K (2022) A fuzzy synthetic evaluation of vulnerabilities affecting supply chain resilience of industrialized construction in Hong Kong. Engineering, Construction and Architectural Management, 29(6), pp. 2358-2381. ISSN 0969-9988

El Meouche, R; Abunemeh, M; Hijaze, I; Mebarki, A and Shahrour, I (2018) Developing optimal paths for evacuating risky construction sites. Journal of Construction Engineering and Management, 144(2): 04017099, ISSN 0733-9364

Elavaar Kuzhali S and Pushpa M K, P (2024) Adaptive deep learning for deep COVID-19 diagnosis. Journal of Engineering, Design and Technology, 22(3), pp. 763-794. ISSN 1726-0531

Elbashbishy, T and El-Adaway, I H (2023) System dynamic modeling to study the impact of construction industry characteristics and associated macroeconomic indicators on workforce size and labor retention rate. Journal of Construction Engineering and Management, 149(10): 04023100, ISSN 0733-9364

Elbashbishy, T S; Ali, G G and El-adaway, I H (2022) Blockchain technology in the construction industry: Mapping current research trends using social network analysis and clustering. Construction Management and Economics, 40(5), pp. 406-427. ISSN 01446193

Elbeltagi, E; Hegazy, T and Eldosouky, A (2004) Dynamic layout of construction temporary facilities considering safety. Journal of Construction Engineering and Management, 130(4), pp. 534-541. ISSN 0733-9364

Elghamrawy, T M (2011) Optimizing work zone practices for highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Elhami Khorasani, N and Garlock, M E M (2017) Overview of fire following earthquake: Historical events and community responses. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 158-174. ISSN 1759-5916

Elsebaei, M; Elnawawy, O; Othman, A A E and Badawy, M (2022) Causes and impacts of site accidents in the Egyptian construction industry. International Journal of Construction Management, 22(14), pp. 2659-2670. ISSN 1562-3599

Elsheikh, A; Motawa, I and Diab, E (2023) Multi-objective genetic algorithm optimization model for energy efficiency of residential building envelope under different climatic conditions in Egypt. International Journal of Construction Management, 23(7), pp. 1244-1253. ISSN 1562-3599

Eltinay, N and Egbu, C (2017) Disaster risk reduction conceptual framework: Open data for building resilience in critical infrastructure. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Embry, E (2023) Building change: A multi-level analysis of resilience through sustainability, health, and entrepreneurship in the built environment. PhD thesis, University of Colorado at Boulder, USA.

Emuze, F (2017) The human contribution to unsafe construction acts and conditions in the central region of South Africa. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Emuze, F and Ravu, P (2014) Optimism bias, pathogens and cost overrun: The case of an RTS project in South Africa. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Emuze, F and Smallwood, J J (2012) Perspectives on health and safety in construction and design. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 27-34. ISSN 17514312

Emuze F, S J (2013) Construction motor vehicle accidents in South Africa: Causes and impact. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Enz, D L (2009) Construction project administration and management for mitigating work zone crashes and fatalities: An integrated risk management model. PhD thesis, Iowa State University, USA.

Erk, E Y; Budayan, C; Koc, K and Tokdemir, O B (2023) Value creation in PPP projects undertaken in the Turkish healthcare industry. Journal of Construction Engineering and Management, 149(11): 04023108, ISSN 0733-9364

Esmaeili, B (2012) Identifying and quantifying construction safety risks at the attribute level. PhD thesis, University of Colorado at Boulder, USA.

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. I: Analysis at the fundamental level. Journal of Construction Engineering and Management, 141(8): 04015021, ISSN 0733-9364

Evans, M (2022) Strategic frameworks for managing lean construction on megaprojects: towards global integrated delivery and corporate governance. PhD thesis, University of Bolton, UK.

Evans, M and Farrell, P (2023) A strategic framework managing challenges of integrating lean construction and integrated project delivery on construction megaprojects, towards global integrated delivery transformative initiatives in multinational organisations. Journal of Engineering, Design and Technology, 21(2), pp. 376-416. ISSN 1726-0531

Evans, M; Farrell, P; Elbeltagi, E and Dion, H (2023) Barriers to integrating lean construction and integrated project delivery (IPD) on construction megaprojects towards the global integrated delivery (gid) in multinational organisations: Lean IPD&gid transformative initiatives. Journal of Engineering, Design and Technology, 21(3), pp. 778-818. ISSN 1726-0531

Faheem Haider, M.; Aslam, M.; Khan, R. W. A. and Malik, M. S. A. (2026) Exploring the factors to improve complaint management system in building management through a case study. International Journal of Construction Management, 26(9), pp. 1777-1798. ISSN 1562-3599

Fahmy, K A; Yahya, A and Zorkany, M (2022) A decision support healthcare system based on IoT and neural network technique. Journal of Engineering, Design and Technology, 20(3), pp. 727-748. ISSN 1726-0531

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Famakin, I O; Aigbavboa, C and Molusiwa, R (2023) Exploring challenges to implementing health and safety regulations in a developing economy. International Journal of Construction Management, 23(1), pp. 89-97. ISSN 1562-3599

Fan, C; Li, X and Li, H (2024) Optimizing the regulation of commercial real estate presale deposits: The role of third-party regulation and the design of government incentives. Journal of Construction Engineering and Management, 150(10): 04024143, ISSN 0733-9364

Farnham, C; Emura, K and Mizuno, T (2015) Evaluation of cooling effects: Outdoor water mist fan. Building Research & Information, 43(3), pp. 334-345. ISSN 0961-3218

Fateh, M A M; Supian, A N and Goh, C S (2024) Managing emotional intelligence of construction players during COVID-19 in Malaysia. Journal of Construction in Developing Countries, 29(1), pp. 191-210. ISSN 1823-6499

Feng, Chen (2015) Camera marker networks for pose estimation and scene understanding in construction automation and robotics. PhD thesis, University of Michigan, USA.

Feng, H; Song, Q; Yin, C and Cao, D (2022) Adaptive impedance control method for dynamic contact force tracking of robotic excavators. Journal of Construction Engineering and Management, 148(11): 04022124, ISSN 0733-9364

Fenn, P; Lowe, D and Speck, C (1997) Conflict and dispute in construction. Construction Management and Economics, 15(6), pp. 513-518. ISSN 01446193

Ferenchak, N N (2025) Us road safety during COVID-19: Motorist, pedestrian and bicyclist fatality trends. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 193-208. ISSN 1759-5908

Fereshtehnejad, S (2018) Multi-hazard lifecycle methods for aging structures and infrastructure systems. PhD thesis, Ohio State University, USA.

Feriadi, H; Wong, N H; Chandra, S and Cheong, K W (2003) Adaptive behaviour and thermal comfort in Singapore's naturally ventilated housing. Building Research & Information, 31(1), pp. 13-23. ISSN 0961-3218

Flynn, M A and Sampson, J M (2012) Trench safety-using a qualitative approach to understand barriers and develop strategies to improve trenching practices. International Journal of Construction Education and Research, 8(1), pp. 63-79. ISSN 1557-8771

Forcada, N; Gangolells, M; Casals, M and Macarulla, M (2017) Factors affecting rework costs in construction. Journal of Construction Engineering and Management, 143(8): 04017032, ISSN 0733-9364

Foster-Smith, L; Walsh, S; Crapper, M and Sherratt, F (2014) Safety and volunteer construction workers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

França, A J G L and Ornstein, S W (2022) The role of the built environment in updating design requirements in the post-pandemic scenario: A case study of selected diagnostic facilities in Brazil. Architectural Engineering and Design Management, 18(5), pp. 671-689. ISSN 1745-2007

Fredericks, T; Abudayyeh, O; Palmquist, M and Torres, H N (2002) Mechanical contracting safety issues. Journal of Construction Engineering and Management, 128(2), pp. 186-193. ISSN 0733-9364

Fredericks, T K; Abudayyeh, O; Choi, S D; Wiersma, M and Charles, M (2005) Occupational injuries and fatalities in the roofing contracting industry. Journal of Construction Engineering and Management, 131(11), pp. 1233-1240. ISSN 0733-9364

Fu, H; Zhu, H; Xue, P; Hu, X; Guo, X and Liu, B (2023) Eye-tracking study of public acceptance of 5g base stations in the context of the COVID-19 pandemic. Engineering, Construction and Architectural Management, 30(8), pp. 3416-3437. ISSN 0969-9988

Fujino, T (1994) The development of a method for investigating construction site accidents using fuzzy fault tree analysis. PhD thesis, Ohio State University, USA.

Fullen, M D (2009) The development, diffusion and evaluation of a fall hazard safety training program for residential construction workers utilizing instructor led and new media delivery. EdD thesis, West Virginia University, USA.

Gambatese, J A; Behm, M and Hinze, J W (2005) Viability of designing for construction worker safety. Journal of Construction Engineering and Management, 131(9), pp. 1029-1036. ISSN 0733-9364

Gambatese, J A; Michael Toole, T and Abowitz, D A (2017) Owner perceptions of barriers to prevention through design diffusion. Journal of Construction Engineering and Management, 143(7): 04017016, ISSN 0733-9364

Gamil, Y; Al-Sarafi, A H and Najeh, T (2023) Post COVID-19 pandemic possible business continuity strategies for construction industry revival a preliminary study in the Malaysian construction industry. International Journal of Disaster Resilience in the Built Environment, 14(5), pp. 640-654. ISSN 1759-5916

Gao, L; Luo, X; Yang, W; Zhang, N and Deng, X (2023) Relationship between social support and repatriation intention of expatriates in international construction projects. Engineering, Construction and Architectural Management, 30(8), pp. 3292-3309. ISSN 0969-9988

Garcia, C; Huebschman, R; Abraham, D M and Bullock, D M (2006) Using GPS to measure the impact of construction activities on rural interstates. Journal of Construction Engineering and Management, 132(5), pp. 508-515. ISSN 0733-9364

Garrett, J W and Teizer, J (2009) Human factors analysis classification system relating to human error awareness taxonomy in construction safety. Journal of Construction Engineering and Management, 135(8), pp. 754-763. ISSN 0733-9364

Garretón, J Y; Rodriguez, R and Pattini, A (2016) Effects of perceived indoor temperature on daylight glare perception. Building Research & Information, 44(8), pp. 907-919. ISSN 0961-3218

Gauthier, S and Shipworth, D (2015) Behavioural responses to cold thermal discomfort. Building Research & Information, 43(3), pp. 355-370. ISSN 0961-3218

Geminiani, F L; Smallwood, J J and van Wyk, J J (2008) The effectiveness of the occupational health and safety (OH&S) inspectorate in South African construction. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gerassis, S; Martín, J E; García, J T; Saavedra, A and Taboada, J (2017) Bayesian decision tool for the analysis of occupational accidents in the construction of embankments. Journal of Construction Engineering and Management, 143(2): 04016093, ISSN 0733-9364

Gerstenberger, A J (2021) Modeling the likelihood of construction incidents using public data. EdD thesis, Teachers College, Columbia University, USA.

Ghanbariazarneir, S.; Maskell, D.; Darby, A.; Heshmati, K. and Walker, I. (2026) The relationship between temperature, relative humidity, and productivity in workplace settings. Building Research & Information, 54(5), pp. 611-631. ISSN 0961-3218

Ghansah, F A and Lu, W (2025) Evaluating the critical resultant impacts of the COVID-19 pandemic on quality assurance of cross-border construction logistics and supply chain. Engineering, Construction and Architectural Management, 32(10), pp. 6665-6689. ISSN 0969-9988

Ghansah, F A and Lu, W (2023) Responses to the COVID-19 pandemic in the construction industry: A literature review of academic research. Construction Management and Economics, 41(9), pp. 781-803. ISSN 01446193

Ghansah, F A and Lu, W (2025) Managerial framework for quality assurance of cross-border construction logistics and supply chain during pandemic and post-pandemic: Lessons from COVID-19 in the world’s factory. Engineering, Construction and Architectural Management, 32(5), pp. 3007-3056. ISSN 0969-9988

Ghansah, F A; Lu, W and Ababio, B K (2024) Modelling the critical challenges of quality assurance of cross-border construction logistics and supply chain during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 31(5), pp. 2128-2150. ISSN 0969-9988

Gharaie, E; Lingard, H and Cooke, T (2015) Causes of fatal accidents involving cranes in the Australian construction industry. Construction Economics and Building, 15(2), pp. 1-12. ISSN 2204-9029

Ghosh, S (2014) Does formal daily huddle meetings improve safety awareness? International Journal of Construction Education and Research, 10(4), pp. 285-299. ISSN 1557-8771

Ghosh, S; Nourihamedani, M; Reyes, M and Snyder, L (2024) Association between leading indicators of safety performance in construction projects. International Journal of Construction Education and Research, 20(2), pp. 121-135. ISSN 15578771

Ghosh, S; Nourihemadani, M and Reyes, M (2025) Effect of previous accidents and near-miss incidents on risk perceptions of construction workers. International Journal of Construction Education and Research, 21(2), pp. 213-229. ISSN 1557-8771

Gibb, A; Lingard, H; Behm, M and Cooke, T (2014) Construction accident causality: Learning from different countries and differing consequences. Construction Management and Economics, 32(5), pp. 446-459. ISSN 01446193

Gibson, G E; Sanboskani, H; El Asmar, M and Aramali, V (2022) Employing technology to enable remote research charrettes as a method for engaging industry and uncovering best practices: A novel approach for a post-COVID-19 world. Journal of Construction Engineering and Management, 148(11): 04022122, ISSN 0733-9364

Gillen, M E (1996) Nonfatal falls in construction workers: Predictors of injury severity. PhD thesis, University of California, San Francisco, USA.

Goel, A (2023) Using secondary data in research on social sustainability in construction project management: A transition from "interview society" to "project-as-practice". Engineering, Construction and Architectural Management, 30(9), pp. 3858-3875. ISSN 0969-9988

Goh, Y M (2005) A case-based reasoning approach to construction safety risk assessment. PhD thesis, National University of Singapore, Singapore.

Goh, Y M and Binte Sa'Adon, N F (2015) Cognitive factors influencing safety behavior at height: A multimethod exploratory study. Journal of Construction Engineering and Management, 141(6): 04015003, ISSN 0733-9364

Goh, Y M and Goh, W M (2015) Evaluating the effectiveness of fall prevention plan: Do we need another safety document? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Goh, Y M and Wang, Q (2015) Investigating the adequacy of horizontal lifeline system design through case studies from Singapore. Journal of Construction Engineering and Management, 141(7): 4015017, ISSN 0733-9364

Golizadeh, Hamed (2019) Adoption of building information modelling innovations to reduce occupational fatalities in the Australian construction industry. PhD thesis, Queensland University of Technology, Australia.

Gonsalves, N; Akanmu, A; Gao, X; Agee, P and Shojaei, A (2023) Industry perception of the suitability of wearable robot for construction work. Journal of Construction Engineering and Management, 149(5): 04023017, ISSN 0733-9364

Gonsalves, N J; Yusuf, A; Ogunseiju, O and Akanmu, A (2024) Evaluation of concrete workers' interaction with a passive back-support exoskeleton. Engineering, Construction and Architectural Management, 31(11), pp. 4585-4601. ISSN 0969-9988

González, J F and Gongal, A (2021) Unidirectional pedestrian circulation: Physical distancing in informal settlements. Buildings & Cities, 2(1), pp. 655-665. ISSN 2632-6655

Goodrum, P M and Dai, J (2005) Differences in occupational injuries, illnesses, and fatalities among Hispanic and non-Hispanic construction workers. Journal of Construction Engineering and Management, 131(9), pp. 1021-1028. ISSN 0733-9364

Gormley, M and Kelly, D A (2019) Pressure transient suppression in drainage systems of tall buildings. Building Research & Information, 47(4), pp. 421-436. ISSN 0961-3218

Grant, A and Hinze, J (2013) Underlying causal factors associated with construction worker fatalities involving stepladders. Construction Economics and Building, 13(1), pp. 13-22. ISSN 2204-9029

Grill, M; Nielsen, K; Grytnes, R; Pousette, A and Törner, M (2019) The leadership practices of construction site managers and their influence on occupational safety: An observational study of transformational and passive/avoidant leadership. Construction Management and Economics, 37(5), pp. 278-293. ISSN 01446193

Grosskopf, K R (2010) Post-disaster recovery and reconstruction safety training. International Journal of Disaster Resilience in the Built Environment, 1(3), pp. 322-333. ISSN 1759-5916

Gujar, S and Deshmukh, A (2023) Methodology for visual comfort analysis in intermediate open spaces of residential areas, case study: Nagpur, India. Architectural Engineering and Design Management, 19(6), pp. 602-619. ISSN 1745-2007

Gumusburun Ayalp, G and Çivici, T (2023) Factors affecting the performance of construction industry during the COVID-19 pandemic: A case study in Turkey. Engineering, Construction and Architectural Management, 30(8), pp. 3160-3202. ISSN 0969-9988

Guo, Q; Amin, S; Wang, H and Yan, H (2024) Coupling simulation of human-environmental safety risk factors in metro construction: A case study of Rongjiazhai Station at xi’an Metro Line 5 in China. International Journal of Construction Education and Research, 20(1), pp. 26-42. ISSN 15578771

Guo, X; Wu, H; Chen, Y; Chang, Y and Ao, Y (2023) Gauging the impact of personal lifestyle, indoor environmental quality and work-related factors on occupant productivity when working from home. Engineering, Construction and Architectural Management, 30(8), pp. 3713-3730. ISSN 0969-9988

Gupta, N; Gunawan, I and Kamineni, R (2024) Analysing resilience and leagility in post-pandemic sustainable supply chain management: A systematic literature review. Built Environment Project and Asset Management, 14(3), pp. 432-448. ISSN 2044-124X

Gupta, Naresh (2024) Impact of COVID-19 pandemic on the sustained development of infrastructure projects: Putting economies on the brink. PhD thesis, University of Adelaide, Australia.

Gyadu-Asiedu, W; Anewuoh, F and Appiadu-Boakye, K (2023) The real estate market in Ghana: The nexus between price and income levels. Built Environment Project and Asset Management, 13(1), pp. 56-72. ISSN 2044-124X

Gyampoh-Vidogah, R; Moreton, R and Proverbs, D (2003) Implementing information management in construction: Establishing problems, concepts and practice. Construction Innovation, 3(3), pp. 157-173. ISSN 1471-4175

Gómez-Sirvent, J L; Fernández-Sotos, D; Fernández-Sotos, A; Sánchez-Reolid, R; López de la Rosa, F and Fernández-Caballero, A (2024) Exploring the impact of windows on musicians' experience: A neuroarchitecture perspective. Building Research & Information, 52(7), pp. 765-780. ISSN 0961-3218

Ha, D. K. (2026) An evaluation and comparison of critical factors contributing to falls-from-height hazards in Vietnamese building projects. Journal of Engineering, Design and Technology, 24(3), pp. 831-858. ISSN 1726-0531

Hadizade, S. (2026) Components of children's hospital architecture from the perspective of staff: A mixed-method case study from Iran. Architectural Engineering and Design Management, 22(2), pp. 295-307. ISSN 1745-2007

Hallowell, M R; Hardison, D and Desvignes, M (2016) Information technology and safety: Integrating empirical safety risk data with building information modeling, sensing, and visualization technologies. Construction Innovation, 16(3), pp. 323-347. ISSN 1471-4175

Han, Y; Yin, Z; Zhang, J; Jin, R and Yang, T (2020) Eye-tracking experimental study investigating the influence factors of construction safety hazard recognition. Journal of Construction Engineering and Management, 146(8): 04020091, ISSN 0733-9364

Handa, V K and Rivers, D (1983) Downgrading construction incidents. Journal of Construction Engineering and Management, 109(2), pp. 190-205. ISSN 0733-9364

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Hasan, A and Kamardeen, I (2022) Occupational health and safety barriers for gender diversity in the Australian construction industry. Journal of Construction Engineering and Management, 148(9): 04022100, ISSN 0733-9364

Hasanzadeh, S; Dao, B; Esmaeili, B and Dodd, M D (2019) Role of personality in construction safety: Investigating the relationships between personality, attentional failure, and hazard identification under fall-hazard conditions. Journal of Construction Engineering and Management, 145(9): 04019052, ISSN 0733-9364

Hasanzadeh, S; De La Garza, J M and Geller, E S (2020) Latent effect of safety interventions. Journal of Construction Engineering and Management, 146(5): 04020033, ISSN 0733-9364

Hasanzadeh, S; Esmaeili, B and Dodd, M D (2018) Examining the relationship between construction workers' visual attention and situation awareness under fall and tripping hazard conditions: Using mobile eye tracking. Journal of Construction Engineering and Management, 144(7): 04018060, ISSN 0733-9364

Hashem M. Mehany, M S; Killingsworth, J and Shah, S (2021) An evaluation of training delivery methods’ effects on construction safety training and knowledge retention - a foundational study. International Journal of Construction Education and Research, 17(1), pp. 18-36. ISSN 1557-8771

Hassan, M E; Kandil, A; Senouci, A and Al-Derham, H (2016) Organizational behavior attributes and sustainable construction adoption: An econometric analysis using data from Qatar. Journal of Construction Engineering and Management, 142(12): 05016016, ISSN 0733-9364

Hassanain, M A (2007) Post-occupancy indoor environmental quality evaluation of student housing facilities. Architectural Engineering and Design Management, 3(4), pp. 249-256. ISSN 1745-2007

He, Y; Wang, X; Guo, W; Zou, X and Ye, Y (2025) Patient´s perception of spatial complexity in emergency spaces of a hospital in China: a method for stakeholders to improve design and management. Architectural Engineering and Design Management, 21(4), pp. 721-745. ISSN 1745-2007

Heidaranlu, E; Tavan, A and Aminizadeh, M (2022) Investigating the level of functional preparedness of selected Tehran hospitals in the face of biological events: A focus on COVID-19. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 150-162. ISSN 1759-5916

Hepworth, A (2021) Decision-making in immature projects organisational environment: A mental model approach that influences conscientious critical thinking. PhD thesis, University of Liverpool, UK.

Hide, S (2003) Exploring accident causation in the construction industry. PhD thesis, Loughborough University, UK.

Hindman, D P; Bamberg, C R and Nussbaum, M A (2014) Bracing of wood composite I-joists to resist lateral buckling from walking loads. Journal of Construction Engineering and Management, 140(9): 04014037, ISSN 0733-9364

Hindman, D P; Timko, P D and Nussbaum, M A (2013) Mechanical response of unbraced wood composite I-joist to walking loads. Journal of Construction Engineering and Management, 139(11): 4013023, ISSN 0733-9364

Hinsberg, K L (2025) Crisis and governance communication for construction safety. PhD thesis, Arizona State University, USA.

Hinze, J and Bren, D (1996) Analysis of fatalities and injuries due to powerline contacts. Journal of Construction Engineering and Management, 122(2), pp. 177-182. ISSN 0733-9364

Hinze, J; Devenport, J N and Giang, G (2006) Analysis of construction worker injuries that do not result in lost time. Journal of Construction Engineering and Management, 132(3), pp. 321-326. ISSN 0733-9364

Hinze, J; Huang, X and Terry, L (2005) The nature of struck-by accidents. Journal of Construction Engineering and Management, 131(2), pp. 262-268. ISSN 0733-9364

Hinze, J; Pedersen, C and Fredley, J (1998) Identifying root causes of construction injuries. Journal of Construction Engineering and Management, 124(1), pp. 67-71. ISSN 0733-9364

Hinze, J and Russell, D B (1995) Analysis of fatalities recorded by OSHA. Journal of Construction Engineering and Management, 121(2), pp. 209-214. ISSN 0733-9364

Hipwood, T (2022) Adapting owner-occupied dwellings in the UK: Lessons for the future. Buildings & Cities, 3(1), pp. 297-315. ISSN 2632-6655

Hiyasat, R; Sosa, M and Ahmad, L (2023) Use of work-space at home under COVID-19 conditions in the UAE. Engineering, Construction and Architectural Management, 30(8), pp. 3142-3159. ISSN 0969-9988

Ho, S-P (2001) Real options and game theoretic valuation, financing and tendering for investments on build-operate-transfer projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hollick, F; Humphrey, D; Oreszczyn, T; Elwell, C and Huebner, G (2024) Building energy use in COVID-19 lockdowns: Did much change? Buildings & Cities, 5(1), pp. 182-198. ISSN 2632-6655

Holt, G D and Edwards, D J (2005) Domestic builder selection in the uk housing repair and maintenance sector: a critique. Journal of Construction Research, 6(1), pp. 123-137. ISSN 1609-9451

Hossain, M M and Ahmed, S (2022) Developing an automated safety checking system using BIM: A case study in the Bangladeshi construction industry. International Journal of Construction Management, 22(7), pp. 1206-1224. ISSN 1562-3599

Hossain, M M; Ahmed, S; Anam, S M A; Baxramovna, I A; Meem, T I; Sobuz, M H R and Haq, I (2025) BIM-based smart safety monitoring system using a mobile app: A case study in an ongoing construction site. Construction Innovation, 25(2), pp. 552-576. ISSN 1471-4175

Hsiao, W T; Yu, W D and Shih, C C (2026) Proactive construction hazard prevention model using machine learning. Journal of Construction Engineering and Management, 152(2): 04025261, ISSN 0733-9364

Hu, K (2011) Three essays on modeling complex dynamic problems in health and safety. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Hu, K; Rahmandad, H; Smith-Jackson, T and Winchester, W (2011) Factors influencing the risk of falls in the construction industry: A review of the evidence. Construction Management and Economics, 29(4), pp. 397-416. ISSN 1466433X

Hu, Xiaoqiang (2023) New approaches to improving highway design, safety, and visual presentation. PhD thesis, Purdue University, USA.

Hua, G B and Pin, T H O (2000) Forecasting construction industry demand, price and productivity in Singapore: The Box-Jenkins approach. Construction Management and Economics, 18(5), pp. 607-618. ISSN 01446193

Huang, H; Hu, H; Xu, F and Zhang, Z (2024) Kinesiology-inspired assessment of intrusion risk based on human motion features. Journal of Construction Engineering and Management, 150(7): 04024072, ISSN 0733-9364

Huang, X and Hinze, J (2003) Analysis of construction worker fall accidents. Journal of Construction Engineering and Management, 129(3), pp. 262-271. ISSN 0733-9364

Hubner, Marilyn (2016) Constructing safety training: Foundations of attitudes and perceptions of the construction site supervisor. PhD thesis, Victoria University, Australia.

Huebner, G M; Watson, N E; Direk, K; McKenna, E; Webborn, E; Hollick, F; Elam, S and Oreszczyn, T (2021) Survey study on energy use in UK homes during COVID-19. Buildings & Cities, 2(1), pp. 952-969. ISSN 2632-6655

Hung, Y H; Smith-Jackson, T and Winchester, W (2011) Use of attitude congruence to identify safety interventions for small residential builders. Construction Management and Economics, 29(2), pp. 113-130. ISSN 1466433X

Hussain, A; Ibrahim, C K I C; Belayutham, S; Manu, P and Nazruddin, M A (2023) Oshcim: A study on Malaysian occupational safety and health regulatory capabilities readiness in the design phase. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ibrahim, A D (2007) The development of a procurement strategy for primary health care facilities in Nigeria. PhD thesis, Loughborough University, UK.

Ibrahim, F S; Esa, M and Kamal, E M (2022) Strategies to minimise the impact of COVID-19 on the construction industry: A case study of construction site clusters in Malaysia. Construction Economics and Building, 22(3), pp. 21-42. ISSN 2204-9029

Ibrahim, M N (2022) Risk management in construction of megahousing projects in Egypt. PhD thesis, London South Bank University, UK.

Ikpe, E K P P D O D (2006) The management of construction health and safety: Investigating the cost-benefit. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Imriyas, K; Low, S P; Teo, A L and Chan, S L (2008) Premium-rating model for workers' compensation insurance in construction. Journal of Construction Engineering and Management, 134(8), pp. 601-617. ISSN 0733-9364

Imriyas, K; Pheng, L S and Teo, E A L (2007) A fuzzy knowledge-based system for premium rating of workers' compensation insurance for building projects. Construction Management and Economics, 25(11), pp. 1177-1195. ISSN 01446193

Indrastuti (2014) Unit cost modelling of public building project in Kepulauan Riau, Indonesia. PhD thesis, University of Malaya, Malaysia.

Irizarry, J (2005) Safety issues in steel erection: Impact on task durations and risk perception of ironworkers. PhD thesis, Purdue University, USA.

Irizarry, J and Abraham, D M (2006) Assessment of risk perception of ironworkers. Journal of Construction Research, 7(1), pp. 111-132. ISSN 1609-9451

Irizarry, J; Simonsen, K L and Abraham, D M (2005) Effect of safety and environmental variables on task durations in steel erection. Journal of Construction Engineering and Management, 131(12), pp. 1310-1319. ISSN 0733-9364

Irumba, R (2015) Modelling of construction safety performance and housing markets in Kampala, Uganda. PhD thesis, KTH Royal Institute of Technology, Sweden.

Ismaeel, W S E; Mohamed, F and Elakkad, N (2021) Scenarios of occupational capacity for high educational buildings in the time of COVID. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Izumi, T; Sukhwani, V; Surjan, A and Shaw, R (2021) Managing and responding to pandemics in higher educational institutions: Initial learning from COVID-19. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 51-66. ISSN 1759-5916

Jacob, J C; Pandit, D and Sen, J (2025) Developing a validated simulation model of micro-zonal air-conditioning to evaluate thermal comfort parameters. Architectural Engineering and Design Management, 21(2), pp. 289-314. ISSN 1745-2007

Jalloul, Hiba (2024) Leveraging emergence for enhanced planning and decision-making in the built environment: Applications in resilience and sustainability planning. PhD thesis, Florida State University, USA.

Jallow, H; Renukappa, S and Subashini, S (2021) The impact of COVID-19 outbreak on United Kingdom infrastructure sector. Smart and Sustainable Built Environment, 10(4), pp. 581-593. ISSN 2046-6099

Jayasena, N S; Chan, D W M and Kumaraswamy, M (2024) Benefits, enablers and barriers in deploying PPP when developing smart infrastructure in non-urban areas. Built Environment Project and Asset Management, 14(1), pp. 92-108. ISSN 2044-124X

Jayasena, N S; Chan, D W M; Kumaraswamy, M M and Saka, A B (2023) Applicability of public-private partnerships in smart infrastructure development: The case of Hong Kong. International Journal of Construction Management, 23(11), pp. 1932-1944. ISSN 1562-3599

Jazayeri, E (2019) Hazard recognition and risk perception among union electricians. PhD thesis, University of Kentucky, USA.

Jenkins, K (2023) The COVID-19 implications on the United States failing infrastructure and its affect on future generations. PhD thesis, Capitol Technology University, USA.

Jens, K and Gregg, J S (2021) The impact on human behaviour in shared building spaces as a result of COVID-19 restrictions. Building Research & Information, 49(8), pp. 827-841. ISSN 0961-3218

Jensen, E and Koch, C (2003) Making large infrastructure projects safe: The case of the Copenhagen Metro. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Jesumoroti, C; Olanrewaju, A and Khor, S C (2024) Defects in Malaysian hospital buildings. International Journal of Building Pathology and Adaptation, 42(5), pp. 835-856. ISSN 2398-4708

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Risk allocation model for price escalations in construction projects: Integrating bargaining game theory and probabilistic Bayesian modeling. Journal of Construction Engineering and Management, 151(9): 04025134, ISSN 0733-9364

Jiang, L; Zhong, H; Chen, J; Cheng, J; Chen, S; Gong, Z; Lun, Z; Zhang, J and Su, Z (2023) Study on the construction workforce management based on lean construction in the context of COVID-19. Engineering, Construction and Architectural Management, 30(8), pp. 3310-3329. ISSN 0969-9988

Jijingi, A T (2019) A BIM-enabled procurement framework in new buildings for the Nigerian architecture, engineering and construction industry. PhD thesis, University of Portsmouth, UK.

Jimoh, I (2021) What explains the efficiency of major public project delivery in Nigeria? PhD thesis, University of Cambridge, UK.

Jin, F; Xiang, W; Ji, Z and Zhang, B (2023) Quantifying the evolutionary mechanism of COVID-19 impact on international construction multi-projects: A risk driver perspective. Engineering, Construction and Architectural Management, 30(8), pp. 3602-3619. ISSN 0969-9988

Jin, R; Guo, B; Adamu, Z; Kangwa, J and Navpreet, C (2021) A critical analysis of collaborative and disruptive digital-driven built environment education. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Jin, X; Ekanayake, E M A C and Shen, G Q P (2022) Critical policy drivers for modular integrated construction projects in Hong Kong. Building Research & Information, 50(4), pp. 467-484. ISSN 0961-3218

Jin, X; Shen, G; Luo, L and Zhou, X (2025) Influence of policies on stakeholders to drive the success of modular integrated construction in Hong Kong. Engineering, Construction and Architectural Management, 32(5), pp. 2814-2843. ISSN 0969-9988

Johnson, H M; Singh, A and Young, R H F (1998) Fall protection analysis for workers on residential roofs. Journal of Construction Engineering and Management, 124(5), pp. 418-428. ISSN 0733-9364

Jones, W; Gibb, A G F and Chow, V (2022) Adapting to COVID-19 on construction sites: What are the lessons for long-term improvements in safety and worker effectiveness? Journal of Engineering, Design and Technology, 20(1), pp. 66-85. ISSN 1726-0531

Ju, L; Ji, Y P; Wu, C; Ning, X and He, Y (2024) Relationship between abusive supervision and workers' well-being in construction projects: Effects of guanxi closeness and trust in managers. Engineering, Construction and Architectural Management, 31(8), pp. 3429-3451. ISSN 0969-9988

Kabundu, E K (2020) A housing affordability and tenure of choice quantum deliverable model in South Africa. PhD thesis, Nelson Mandela Metropolitan University, South Africa.

Kagan, Paula Brumer Franceschini (2024) Occupant behaviour modelling for building performance simulation of naturally ventilated school classrooms. PhD thesis, Universidade Estadual de Campinas, Brazil.

Kalampakorn, S (2000) Stages of construction workers' use of hearing protection. PhD thesis, University of Michigan, USA.

Kallman, J W (1998) Loss control project decision models for the construction industry. PhD thesis, University of Wisconsin - Madison, USA.

Kamardeen, I (2007) A fuzzy knowledge-based system for premium-rating of workers' compensation insurance for construction projects. PhD thesis, National University of Singapore, Singapore.

Kamardeen, I (2009) Strategic safety management information system for building projects in Singapore. Engineering, Construction and Architectural Management, 16(1), pp. 8-25. ISSN 0969-9988

Kamardeen, I and Hasan, A (2022) Occupational health and safety implications of an aging workforce in the Australian construction industry. Journal of Construction Engineering and Management, 148(10): 04022112, ISSN 0733-9364

Kang, L (2025) Examining the relationship between construction fatalities and the construction economy in China: A three-decade analysis. Engineering, Construction and Architectural Management, 32(8), pp. 5558-5577. ISSN 0969-9988

Kanwar, V S; Dutta, H; Dutt, I; Kumar, A; Prakasam, C and Kanwar, M (2022) Impact and awareness of COVID-19 on rural communities: An empirical study of India. Built Environment Project and Asset Management, 12(3), pp. 486-502. ISSN 2044-124X

Karim, M T; Ahmed, S; Hoque, M N; Iorio, J and Abudayyeh, O (2025) Evaluating the management's role in addressing gender and racial disparities to promote DEI in the US construction industry: Exploratory study. Journal of Construction Engineering and Management, 151(9): 05025010, ISSN 0733-9364

Karimi, H; Taylor, T R B; Goodrum, P M and Srinivasan, C (2016) Quantitative analysis of the impact of craft worker availability on construction project safety performance. Construction Innovation, 16(3), pp. 307-322. ISSN 1471-4175

Kasana, D V (2021) Evaluating organizational readiness to implement change within the workplace. PhD thesis, University of North Carolina at Charlotte, USA.

Katebi, A.; Mohammadhosseini, A. and Keshtkar Ghalati, A. (2026) The covid-19 pandemic and its impact on the acceptance model of precast concrete components in building construction. Engineering, Construction and Architectural Management, pp. 1-27. ISSN 0969-9988

Katoch, V and Mohan, S (2019) Design and fabrication of a safety frame for workers carrying out head lifting at construction sites. Journal of Engineering, Design and Technology, 17(6), pp. 1250-1265. ISSN 1726-0531

Kawane, T; Adu-Gyamfi, B and Shaw, R (2025) Exploring the elements of strengthening online higher education in disaster risk reduction: A perspective of sustained strategy in post COVID-19. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 173-192. ISSN 1759-5908

Kazar, G and Comu, S (2022) Exploring the relations between the physiological factors and the likelihood of accidents on construction sites. Engineering, Construction and Architectural Management, 29(1), pp. 456-475. ISSN 0969-9988

Kearns, A. (2022) Housing space and occupancy standards: Developing evidence for policy from a health and wellbeing perspective in the UK context. Building Research & Information, 50(7), pp. 722-737. ISSN 0961-3218

Ketabi, A B and Heravi, G (2022) Developing a framework for evaluating construction project safety levels and optimal cost allocation to safety influential factors. Engineering, Construction and Architectural Management, 29(2), pp. 643-668. ISSN 0969-9988

Khalef, R; Ali, G G; El-adaway, I H and Gad, G M (2022) Managing construction projects impacted by the COVID-19 pandemic: A contractual perspective. Construction Management and Economics, 40(4), pp. 313-330. ISSN 01446193

Khalid, U (2022) Investigation into the development of a human reliability analysis framework for the safety management of construction projects. PhD thesis, Nottingham Trent University, UK.

Khalil, N (2016) Incorporating risk mitigation into building performance rating tools (BPRTS) for Malaysia’s higher education building. PhD thesis, University of Malaya, Malaysia.

Khan, M; Khalid, R; Anjum, S; Tran, S V T and Park, C (2022) Fall prevention from scaffolding using computer vision and IoT-based monitoring. Journal of Construction Engineering and Management, 148(7): 04022051, ISSN 0733-9364

Khanh, H. D.; Tiep, N. V. and Nguyen, K. V. (2026) EFA models for evaluating stakeholder perceptions of falls-from-height risks in building projects: A case study from Vietnam. Journal of Engineering, Design and Technology, 24(6), pp. 1483-1509. ISSN 1726-0531

Khawam, A A (2017) Project manager's role in safety performance of Saudi construction firms: A correlational study. PhD thesis, University of Phoenix, USA.

Kheel, M (2024) The impact of risk and uncertainty on healthcare project delivery and its effect on intra-group conflict in the context of Saudi Arabia. PhD thesis, University of Manchester, UK.

Kheni, N A; Dainty, A R J and Gibb, A G F (2007) Influence of political and socio-cultural environments on health and safety management within SMEs: A Ghana case study. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Kheni, N A; Gibb, A G F and Dainty, A R J (2006) The management of construction site health and safety by small and medium-sized construction businesses in developing countries: A Ghana case study. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kikwasi, G and Mbuya, E (2019) Vulnerability analysis of building structures to floods: The case of flooding informal settlements in Dar es Salaam, Tanzania. International Journal of Building Pathology and Adaptation, 37(5), pp. 629-656. ISSN 23984708

Kim, D and Xiong, S (2025) Enhancing worker safety: Real-time automated detection of personal protective equipment to prevent falls from heights at construction sites using improved yolov8 and edge devices. Journal of Construction Engineering and Management, 151(1): 04024187, ISSN 0733-9364

Kim, K; Cho, Y and Kim, K (2018) BIM-driven automated decision support system for safety planning of temporary structures. Journal of Construction Engineering and Management, 144(8): 04018072, ISSN 0733-9364

Kim, K; Tiedmann, H R and Faust, K M (2025) Construction industry changes induced by the COVID-19 pandemic. Engineering, Construction and Architectural Management, 32(7), pp. 4413-4438. ISSN 0969-9988

Kim, N; Anderson, B A and Ahn, C R (2021) Reducing risk habituation to struck-by hazards in a road construction environment using virtual reality behavioral intervention. Journal of Construction Engineering and Management, 147(11): 04021157, ISSN 0733-9364

Kim, S (2023) Disaster management and recovery: Estimating the disaster impacts on construction costs and evaluating the policy effects on disaster recovery. PhD thesis, University of Texas at Arlington, USA.

Kim, S; Makhmalbaf, A and Shahandashti, M (2024) Diagnosing and quantifying post-COVID-19 fluctuations in the architecture billings indices. Engineering, Construction and Architectural Management, 31(2), pp. 681-695. ISSN 0969-9988

King, S S; Rahman, R A; Fauzi, M A and Haron, A T (2022) Critical analysis of pandemic impact on AEC organizations: The COVID-19 case. Journal of Engineering, Design and Technology, 20(1), pp. 358-383. ISSN 1726-0531

Kiral, I A and Demirkesen, S (2023) Assessing the impact of peripheral vision on construction site safety. Engineering, Construction and Architectural Management, 30(9), pp. 4435-4463. ISSN 0969-9988

Koc, K; Ekmekcioğlu, Ö and Gurgun, A P (2023) Prediction of construction accident outcomes based on an imbalanced dataset through integrated resampling techniques and machine learning methods. Engineering, Construction and Architectural Management, 30(9), pp. 4486-4517. ISSN 0969-9988

Koc, K; Ekmekcioǧlu, Ö and Gurgun, A P (2023) Developing a national data-driven construction safety management framework with interpretable fatal accident prediction. Journal of Construction Engineering and Management, 149(4): 04023010, ISSN 0733-9364

Koneswaran, B; Siriwardana, C and Jayasekara, R U (2022) Development of flood vulnerability curves for Sri Lankan hospitals. International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 99-112. ISSN 1759-5916

Koranteng, C; Simons, B; Abrokwa Gyimah, K and Nkrumah, J (2023) Ghana's green building assessment journey: An appraisal of the thermal performance of an office building in Accra. Journal of Engineering, Design and Technology, 21(1), pp. 188-205. ISSN 1726-0531

Koranteng, C; Simons, B and Manu, F W (2021) A thermal performance study of four communities in Ghana's savannah region. Engineering, Construction and Architectural Management, 28(10), pp. 3261-3281. ISSN 0969-9988

Kose, I. and Gumusburun Ayalp, G. (2026) Transformative impacts of technological developments on architectural education: A holistic scientometric analysis. Engineering, Construction and Architectural Management, 33(5), pp. 3542-3575. ISSN 0969-9988

Krcmar, C A (2022) Indian women construction workers' social construction of human security. PhD thesis, University of Massachusetts Boston, USA.

Kukoyi, P O; Simpeh, F; Adebowale, O J and Agumba, J N (2022) Managing the risk and challenges of COVID-19 on construction sites in Lagos, Nigeria. Journal of Engineering, Design and Technology, 20(1), pp. 99-144. ISSN 1726-0531

Kukoyi, P O and Smallwood, J J (2017) A qualitative study of health and safety construction practices in Lagos. Journal of Construction Business and Management, 1(1), pp. 1-7. ISSN 2521-0165

Kum, Y T; Yap, J B H; Lew, Y L and Lee, W P (2024) Transforming construction health and safety management during COVID-19 pandemic using innovative technologies: PLS-SEM approach. Engineering, Construction and Architectural Management, 31(7), pp. 2770-2808. ISSN 0969-9988

Kum, Y T; Yap, J B H; Lew, Y L and Lee, W P (2024) COVID-19 health and safety challenges on construction sites: Unfolding novel dimensions for construction industries in developing countries. International Journal of Construction Management, 24(2), pp. 187-198. ISSN 1562-3599

Kumar, S; Singh, L K; Roy, L B; Kumar, R and Lal, D (2025) Enhancing the sustainability of slope stability in embankment construction by leveraging smart sensors and monitoring systems for data-driven insights. International Journal of Construction Management, 25(16), pp. 2102-2120. ISSN 1562-3599

Kwok, C; Young, R J and Kirkham, R J (2010) Risk and asset management in privatization/private finance of public utiliities: A risk investigation of water infrastructure projects in China. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Langar, S; Mosier, R and Adhikari, S (2023) Perceptions and pedagogical responses of construction educators during COVID-19. International Journal of Construction Education and Research, 19(4), pp. 405-425. ISSN 1557-8771

Langdon, M (2021) Towards a shift of values in rail infrastructure project evaluation. PhD thesis, University of Nottingham, UK.

Langston, C and Crowley, C (2021) Evaluation of transportation infrastructure: A case study of Gold Coast Light Rail stage 1&2. Construction Economics and Building, 21(4), pp. 1-20. ISSN 2204-9029

Law, Matthew E (2023) Occupational risk perceptions among foreign-born construction workers in central Florida. DPh thesis, Walden University, USA.

Leaman, A and Bordass, B (2001) Assessing building performance in use 4: The probe occupant surveys and their implications. Building Research & Information, 29(2), pp. 129-143. ISSN 0961-3218

Lee, C Y; Chong, H Y; Tanko, B L and Klufallah, M (2022) Effect between trust in communication technology and interorganizational trust in BIM-enabled projects. Journal of Construction Engineering and Management, 148(8): 04022059, ISSN 0733-9364

Lee, D; Khan, N and Park, C (2023) Rigorous analysis of safety rules for vision intelligence-based monitoring at construction jobsites. International Journal of Construction Management, 23(10), pp. 1768-1778. ISSN 1562-3599

Lee, K T; Im, J B; Park, S J and Kim, J H (2025) Identifying improvements priorities in daycare centre space performance from teachers' perspectives: Application of importance–performance analysis and structural equation modelling. Engineering, Construction and Architectural Management, 32(1), pp. 639-672. ISSN 0969-9988

Lee, M; Jeong, J and Lee, J (2025) Development of a quantitative assessment method for occupational accident risk of construction workers using resource and cost information in the preconstruction stage. Journal of Construction Engineering and Management, 151(12): 04025208, ISSN 0733-9364

Lee, S and Halpin, D W (2003) Predictive tool for estimating accident risk. Journal of Construction Engineering and Management, 129(4), pp. 431-436. ISSN 0733-9364

Lee, Y Y R; Samad, H and Miang Goh, Y (2020) Perceived importance of authentic learning factors in designing construction safety simulation game-based assignment: Random forest approach. Journal of Construction Engineering and Management, 146(3): 04020002, ISSN 0733-9364

Lerche, J; Enevoldsen, P and Seppänen, O (2022) Application of takt and kanban to modular wind turbine construction. Journal of Construction Engineering and Management, 148(2), ISSN 0733-9364

Lestari, R I; Guo, B H W and Goh, Y M (2019) Causes, solutions, and adoption barriers of falls from roofs in the Singapore construction industry. Journal of Construction Engineering and Management, 145(5): 4019027, ISSN 0733-9364

Lester, E (2021) COVID-19 crisis management left tacit knowledge behind. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Levinson, D M (1998) On whom the toll falls: A model of network financing. PhD thesis, University of California, Berkeley, USA.

Lewis, T M (2007) Impact of globalization on the construction sector in developing countries. Construction Management and Economics, 25(1), pp. 7-23. ISSN 1466433X

Li, J.; Ouyang, Y.; Dai, Q. and Luo, X. (2026) Impact of age on cognitive states influencing falling from heights in high-altitude construction: Evidence from a virtual reality and electroencephalogram study. Journal of Construction Engineering and Management, 152(7): 04026101, ISSN 0733-9364

Li, S; Cai, H and Kamat, V R (2016) Integrating natural language processing and spatial reasoning for utility compliance checking. Journal of Construction Engineering and Management, 142(12): 04016074, ISSN 0733-9364

Liang, J; Vishnupriya, V; Le, A and Shen, X (2025) Future directions for advancing Green Star nz to achieve zero-carbon goals: Insights from industry professionals. International Journal of Building Pathology and Adaptation, 43(8), pp. 41-58. ISSN 2398-4708

Liang, R; Li, R and Chong, H Y (2023) Sustainable supplier selection for prefabricated megaprojects during COVID-19: A novel large group decision-making model. Building Research & Information, 51(5), pp. 533-554. ISSN 0961-3218

Liang, R; Xue, Z and Chong, H Y (2023) Risk evaluation of logistics park projects' lifecycle during the COVID-19 pandemic: Failure mode and effects analysis. Journal of Construction Engineering and Management, 149(1): 04022153, ISSN 0733-9364

Liao, C W (2015) Optimal inspection strategies for labor inspection in the construction industry. Journal of Construction Engineering and Management, 141(2): 04014073, ISSN 0733-9364

Lindelöf, D and Morel, N (2008) Bayesian estimation of visual discomfort. Building Research & Information, 36(1), pp. 83-96. ISSN 0961-3218

Ling, F Y Y and Teh, K K L (2025) Effective leadership styles to boost employees' work outcomes during COVID-19 pandemic: Perspective of facilities management professionals. Engineering, Construction and Architectural Management, 32(6), pp. 3857-3882. ISSN 0969-9988

Lingard, H; Cooke, T and Gharaie, E (2013) The how and why of plant-related fatalities in the Australian construction industry. Engineering, Construction and Architectural Management, 20(4), pp. 365-380. ISSN 0969-9988

Lingard, H and Holmes, N (2001) Understanding of occupational health and safety risk control in small business construction firms: Barriers to implementing technological controls. Construction Management and Economics, 19(2), pp. 217-226. ISSN 01446193

Linh, T N Q; Hanh, T T T and Shaw, R (2021) COVID-19 initial preparedness and response in Vietnam during the first six months of the pandemic and the lessons for Sendai framework implementation. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 143-155. ISSN 1759-5916

Liu, D and Li, C (2025) Construction hazard-recognition training for generation Z students: A comparison study based on eye-movement data. Engineering, Construction and Architectural Management, 32(6), pp. 4029-4050. ISSN 0969-9988

Liu, J; Chan, T K; Ndukwe, C V and Liang, Y (2021) Building resilient supply chains for construction small and medium sized enterprises. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Liu, K; Hwang, B G; Jia, J; Man, Q and Zhang, S (2025) Shaping online and offline informal learning networks in off-site construction projects: A proximity perspective. Engineering, Construction and Architectural Management, 32(2), pp. 939-966. ISSN 0969-9988

Lomas, K J and Kane, T (2013) Summertime temperatures and thermal comfort in UK homes. Building Research & Information, 41(3), pp. 259-280. ISSN 0961-3218

Lonsdale, J H (2004) Situational awareness and risk perception of operatives using portable ladders in the construction industry. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Lonsdale, J H (2011) Falls from height: risk perception of ladder users within the UK construction industry. PhD thesis, Heriot-Watt University, UK.

Lopes, Carmen Silvia Gonçalves (2016) Active learning in training engineer: The influence of the use of learning strategies for skills based on a systemic view. PhD thesis, Universidade de São Paulo, Brazil.

Lopez Del Puerto, C; Clevenger, C M; Boremann, K and Gilkey, D P (2014) Exploratory study to identify perceptions of safety and risk among residential Latino construction workers as distinct from commercial and heavy civil construction workers. Journal of Construction Engineering and Management, 140(2): 04013048, ISSN 0733-9364

Love, P; Davis, P; Ellis, J and Cheung, S O (2010) Dispute causation: Identification of pathogenic influences in construction. Engineering, Construction and Architectural Management, 17(4), pp. 404-423. ISSN 0969-9988

Love, P E D; Davis, P; Kerry London, K and Jasper, T (2008) Causal modelling of construction disputes. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Lu, H; Wang, H; Yu, D and Ye, J (2023) Sharp schedule compression in urgent emergency construction projects via activity crashing, substitution and overlapping: A case study of huoshengshan and leishenshan hospital projects in wuhan. Engineering, Construction and Architectural Management, 30(8), pp. 3696-3712. ISSN 0969-9988

Luo, J and Santoso, D S (2024) Critical factors affecting Chinese construction expatriates' living and working conditions in Thailand: A Delphi study. International Journal of Construction Management, 24(10), pp. 1066-1076. ISSN 1562-3599

Luo, X; Li, X; Song, X and Liu, Q (2023) Convolutional neural network algorithm-based novel automatic text classification framework for construction accident reports. Journal of Construction Engineering and Management, 149(12): 04023128, ISSN 0733-9364

Lyu, S; Hon, C K H; Chan, A P C; Jiang, X and Skitmore, M (2023) Critical factors affecting the safety communication of ethnic minority construction workers. Journal of Construction Engineering and Management, 149(2): 04022173, ISSN 0733-9364

Maali, O M (2022) Management practices to improve adoption and employee well-being during organizational changes in the AEC industry. PhD thesis, University of Kansas, USA.

Machline, E; Pearlmutter, D; Cohen, C and Schwartz, M (2023) COVID-19: A catalyst for revitalizing mixed-use urban centers? The case of Paris. Building Research & Information, 51(1), pp. 39-55. ISSN 0961-3218

Madhumitha, B and Onkar, P (2023) The economic domino effect on housing and construction sector: a case of India. Journal of Financial Management of Property and Construction, 28(2), pp. 206-219. ISSN 1366-4387

Mahasuar, K (2023) COVID-19 and its impact on Indian construction industry: An event study approach. Construction Management and Economics, 41(5), pp. 428-444. ISSN 01446193

Mahmood, A F and Rafaa, M M (2022) Designing a collection of two IoT-systems for real time health telemonitoring. Journal of Engineering, Design and Technology, 20(1), pp. 86-98. ISSN 1726-0531

Manase, D (2008) An exploratory study of GIS based analysis of health and safety related information. PhD thesis, University of Wolverhampton, UK.

Marco, E; Tahsiri, M; Sinnett, D and Oliveira, S (2022) Architects' 'enforced togetherness': New design affordances of the home. Buildings & Cities, 3(1), pp. 168-185. ISSN 2632-6655

Marin Ramirez, L S (2014) Safety climate, safety hazards and organizational practices in the construction industry in Colombia. ScD thesis, University of Massachusetts Lowell, USA.

Markkanen, P and Herneoja, A (2024) Constructing a theory-informed workplace design framework: co-design case study for knowledge work environment satisfaction improvement. Building Research & Information, 52(8), pp. 870-886. ISSN 0961-3218

Marks, E D; Cheng, T and Teizer, J (2013) Laser scanning for safe equipment design that increases operator visibility by measuring blind spots. Journal of Construction Engineering and Management, 139(8), pp. 1006-1014. ISSN 0733-9364

Marks, E D and Teizer, J (2013) Method for testing proximity detection and alert technology for safe construction equipment operation. Construction Management and Economics, 31(6), pp. 636-646. ISSN 1466433X

Marton, J and Richter, A (2004) In search of safety on construction sites -implications of culture, organizational structures and structural change on safety. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Mason, B (2023) Advancing autonomous green stormwater infrastructure. PhD thesis, University of Michigan, USA.

Mason, J (1999) The impact of total quality management on construction worker safety. PhD thesis, University of South Florida, USA.

McCabe, B Y (1997) An automated modeling approach for construction performance improvement using simulation and belief networks. PhD thesis, University of Alberta, Canada.

McKay, L J (2010) The effect of offsite construction on occupational health and safety. PhD thesis, Loughborough University, UK.

McKnight, P (2018) Strategies small construction business managers use to reduce safety incidents in their organization. DBA thesis, Walden University, USA.

McMeel, D (2009) The artistry of construction: an investigation into construction as a creative process and the influence of mobile phones within domestic scale construction projects. PhD thesis, University of Edinburgh, UK.

McPeek, K T (2009) Collaborative design pedagogy: A naturalistic inquiry of architectural education. PhD thesis, Texas A&M University, USA.

Mehdi Riazi, Salman Riazi (2014) The use of supply chain management to reduce delays as result of pre-construction deficiencies in Malaysian public sector construction projects. PhD thesis, Queensland University of Technology, Australia.

Mehrvarz, Nassim (2025) Optimising sustainability in building design from a life cycle perspective. PhD thesis, University of New South Wales, Australia.

Mei, X; Ma, W; Xu, F and Zhang, Z (2024) Vision-based detection of unsafe worker guardrail climbing based on posture and instance segmentation data fusion. Journal of Construction Engineering and Management, 150(11): 04024156, ISSN 0733-9364

Meinke, A; Hawighorst, M; Wagner, A; Trojan, J and Schweiker, M (2017) Comfort-related feedforward information: Occupants' choice of cooling strategy and perceived comfort. Building Research & Information, 45(1-2), pp. 222-238. ISSN 0961-3218

Meintjes, I; Bowen, P and Root, D (2007) HIV/AIDS in the South African construction industry: Understanding the HIV/AIDS discourse for a sector-specific response. Construction Management and Economics, 25(3), pp. 255-266. ISSN 1466433X

Mello, Simone Gueresi de (2023) Urban transformation in pieces: Financing, regulation, and implementation tricks of social interest housing in the consortium urban operations of the city of São Paulo. PhD thesis, Universidade de São Paulo, Brazil.

Melzner, J; Zhang, S; Teizer, J and Bargstädt, H J (2013) A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), pp. 661-674. ISSN 1466433X

Miller, L; Mannering, F and Abraham, D M (2009) Effectiveness of speed control measures on nighttime construction and maintenance projects. Journal of Construction Engineering and Management, 135(7), pp. 614-619. ISSN 0733-9364

Misnan, M S and Mohammed, A H (2007) Development of safety culture in the construction industry: A conceptual framework. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Mitropoulos, P; Abdelhamid, T S and Howell, G A (2005) Systems model of construction accident causation. Journal of Construction Engineering and Management, 131(7), pp. 816-825. ISSN 0733-9364

Mitropoulos, P and Memarian, B (2012) Team processes and safety of workers: Cognitive, affective, and behavioral processes of construction crews. Journal of Construction Engineering and Management, 138(10), pp. 1181-1191. ISSN 0733-9364

Mohajeri, M; Ardeshir, A; Banki, M T and Malekitabar, H (2022) Discovering causality patterns of unsafe behavior leading to fall hazards on construction sites. International Journal of Construction Management, 22(15), pp. 3034-3044. ISSN 1562-3599

Mohajeri, N; Walch, A; Gudmundsson, A; Heaviside, C; Askari, S; Wilkinson, P and Davies, M (2021) COVID-19 mobility restrictions: Impacts on urban air quality and health. Buildings & Cities, 2(1), pp. 759-778. ISSN 2632-6655

Mohamed, M A; Hamzah, M J A; Pauzi, N N; Shahrudin, N S N and Sheffie, S I M (2023) The effect of COVID-19 on construction site personnel: Psychological and physiological perspectives. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Mohandes, S R (2020) Towards improvements to the occupational health and safety in construction industry. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Mohanty, S; Dabral, A; Chatterjee, R and Shaw, R (2022) Shelter management during pandemics: Lessons from cascading risks of cyclones and COVID-19. International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 72-88. ISSN 1759-5916

Mohd Latif, H; Essah, E A and Donyavi, S (2024) Creating a link between healthy homes and architectural elements: a qualitative study of modern residential buildings. International Journal of Building Pathology and Adaptation, 42(4), pp. 637-652. ISSN 23984708

Mohd Zainudin, N (2019) Identification and analysis of worker safety hazards in Midwest agribusiness construction work sites. Unpublished PhD thesis, Iowa State University, USA.

Molaei, P; Hashempour, P and Tang, L M (2022) Semi-open spaces of apartments considering COVID-19 pandemic: General expectations of balcony design in the post-pandemic world. Architectural Engineering and Design Management, 18(5), pp. 705-722. ISSN 1745-2007

Molenaar, K R (2005) Programmatic cost risk analysis for highway megaprojects. Journal of Construction Engineering and Management, 131(3), pp. 343-353. ISSN 0733-9364

Momennia Rankohi, S (2022) Investigating the concept of integration in construction projects: Cases of integrated project delivery and design for manufacturing and assembly. PhD thesis, Ecole Polytechnique, Montreal, Canada.

Morimoto, E and Arai, K (2024) Public procurement and business performance in COVID-19 situation: Decline in firms' entry. International Journal of Construction Management, 24(14), pp. 1589-1598. ISSN 1562-3599

Mostafa Adel, E; Elnawawy, O; Ayman Ahmed Ezzat, O and Badawy, M (2021) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Moura, A C M; Morais, C F and Gonçalves Mello, T A (2024) Geodesign and sustainable development goals in the environmental parameterization of the iron quadrangle region, Brazil: An academic experience. International Journal of Building Pathology and Adaptation, 42(2), pp. 294-317. ISSN 23984708

Muhammed, A; Folorunso, C O and Fadairo, G (2024) Assessment of sandcrete hollow blocks' thermal performance as a walling material for tropical buildings in Lokoja, Nigeria. International Journal of Building Pathology and Adaptation, 42(4), pp. 653-671. ISSN 23984708

Mujalli, R O; Marie, I and Al-Kasasbeh, M (2024) Consequences of COVID-19 on jordan's construction sector using data mining techniques. International Journal of Construction Management, 24(12), pp. 1339-1348. ISSN 1562-3599

Mun, H.; Jeong, J.; Jeong, J. and Kumi, L. (2026) Unsupervised learning approach for benchmark models to identify construction projects with high accident risk levels. Engineering, Construction and Architectural Management, 33(5), pp. 3777-3798. ISSN 0969-9988

Mwanaki Alinaitwe, H (2008) Improvement of labour performance and productivity in Uganda's building industry. PhD thesis, Lund University, Sweden.

Mwanaumo, E M (2013) An integrated approach to multi-stakeholder interventions in construction health and safety. DPhil thesis, University of Johannesburg, South Africa.

Myrvang, R and Liu, C Y A (2025) Beyond traditional methods: Enhancing cost escalation forecasting in commercial construction amid economic turbulence. Journal of Construction Engineering and Management, 151(2): 04024201, ISSN 0733-9364

Nabi, M A; El-Adaway, I H and Assaad, R H (2024) Modeling inflation transmission among different construction materials. Journal of Construction Engineering and Management, 150(5): 04024024, ISSN 0733-9364

Nadim, W and Goulding, J S (2010) Offsite production in the UK: The way forward? A UK construction industry perspective. Construction Innovation, 10(2), pp. 181-202. ISSN 1471-4175

Namian, M; Nabil, F R; Al-Mhdawi, M K S; Kermanshachi, S S and Nnaji, C (2024) Postpandemic era: Investigating the impact of COVID-19 on construction workers' situational awareness. Journal of Construction Engineering and Management, 150(9): 04024103, ISSN 0733-9364

Nauman, S; Zheng, C and Ahmad, R (2021) Employee career outlook and turnover: Unleashing the roles of career adaptability and career satisfaction in international construction projects. Journal of Construction Engineering and Management, 147(11): 04021150, ISSN 0733-9364

Navon, R and Kolton, O (2006) Model for automated monitoring of fall hazards in building construction. Journal of Construction Engineering and Management, 132(7), pp. 733-740. ISSN 0733-9364

Nayak, B; Bhattacharyya, S S S; Kulkarni, O and Mehdi, S N (2023) Adoption of online pharmacy applications during COVID-19 pandemic; empirical investigation in the Indian context from push-pull and mooring framework. Journal of Engineering, Design and Technology, 21(4), pp. 1173-1196. ISSN 1726-0531

Ndukwe, C V; Chan, T K; Gao, G and Liu, J (2021) Development of economic nationalism in Australia and implication for the construction supply chain. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Nee, T S; Xing, A C and Yong, L Y (2024) Assessing the post-disaster effects of COVID-19 pandemic towards Malaysian construction industry. Journal of Construction in Developing Countries, 29(2), pp. 59-75. ISSN 1823-6499

Nghitanwa, E M (2016) Development of practical guidelines to promote occupational health and safety for workers in the construction industry in Windhoek, Namibia. DLittPhil thesis, University of South Africa, South Africa.

Ngobi, T G; Manga, M; Kibwami, N and Tutesigensi, A (2021) Construction occupational safety and health incident reporting, recording, monitoring and management in Uganda. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Nguyen, T D H N; Park, S; Jeong, J and Ahn, Y (2026) Post occupancy evaluation of the relocatable modular construction method for temporary educational facilities. Engineering, Construction and Architectural Management, 33(1), pp. 785-809. ISSN 0969-9988

Nguyen, L D; Tran, D Q and Chandrawinata, M P (2016) Predicting safety risk of working at heights using Bayesian networks. Journal of Construction Engineering and Management, 142(9): 04016041, ISSN 0733-9364

Nguyen, T; Gosine, R and Warrian, P (2022) A review of the role of digitalization in health risk management in extractive industries: a study motivated by COVID-19. Journal of Engineering, Design and Technology, 20(2), pp. 475-496. ISSN 1726-0531

Nguyen, T; Nguyen, L H; Chileshe, N and Hallo, L (2023) Investigating critical risk factors of selecting joint venture contractors for infrastructure projects implementation in Vietnam. International Journal of Construction Management, 23(14), pp. 2438-2451. ISSN 1562-3599

Nguyen, Tuan Anh (2019) Options and flexibility in PPP toll road projects. PhD thesis, University of New South Wales, Australia.

Nicol, J F; Hacker, J; Spires, B and Davies, H (2009) Suggestion for new approach to overheating diagnostics. Building Research & Information, 37(4), pp. 348-357. ISSN 0961-3218

Ning, X; Shan, M; Li, Z and Nie, Z (2025) Prediction of construction material prices based on the sliding window catboost model. Journal of Construction Engineering and Management, 151(12): 04025196, ISSN 0733-9364

Niroshana, N; Siriwardana, C and Jayasekara, R (2023) The impact of COVID-19 on the construction industry and lessons learned: A case of Sri Lanka. International Journal of Construction Management, 23(15), pp. 2521-2538. ISSN 1562-3599

Nishigaki, S; Vavrin, J; Kano, N; Haga, T; Kunz, J C and Law, K (1994) Humanware, human error, and hiyari-hat: A template of unsafe symptoms. Journal of Construction Engineering and Management, 120(2), pp. 421-442. ISSN 0733-9364

Niza, I L; da Luz, I M; de Souza, M P and Broday, E E (2025) Hierarchical and two-step clustering to assess symptoms of sick building syndrome in office spaces in an educational building. Architectural Engineering and Design Management, 21(4), pp. 603-620. ISSN 1745-2007

Nnaji, C; Gambatese, J; Karakhan, A and Osei-Kyei, R (2020) Development and application of safety technology adoption decision-making tool. Journal of Construction Engineering and Management, 146(4): 04020028, ISSN 0733-9364

Noopur (2025) Identifying the stressors hindering performance in the Indian construction industry: An empirical investigation. Engineering, Construction and Architectural Management, 32(2), pp. 1053-1073. ISSN 0969-9988

Nwadike, A and Aigwi, I E (2024) Impacts of the COVID-19 pandemic on building consents and construction sector activities in New Zealand. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Nwal, S S; Panuwatwanich, K and Naing, M (2024) Critical factors influencing the performance of public housing construction projects in Myanmar. Journal of Construction in Developing Countries, 29(1), pp. 163-190. ISSN 1823-6499

Obiaigwe, Innocent Onyeka (2025) Robotizing safety: Prospects and barriers of robotic technology adoption for construction injury prevention in the UK. PhD thesis, University of Salford, UK.

Obiozo, R N and Smallwood, J J (2015) Biophilic construction site model: Enhancing the motivational and humanistic value of the green construction site. Journal of Construction Engineering and Management, 141(3), ISSN 0733-9364

Ogunseiju, O; Olayiwola, J; Akanmu, A and Olatunji, O A (2022) Evaluation of postural-assist exoskeleton for manual material handling. Engineering, Construction and Architectural Management, 29(3), pp. 1358-1375. ISSN 0969-9988

Oguz Erkal, E D; Hallowell, M R and Bhandari, S (2021) Practical assessment of potential predictors of serious injuries and fatalities in construction. Journal of Construction Engineering and Management, 147(10): 04021129, ISSN 0733-9364

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Okpala, I; Nnaji, C and Gambatese, J (2023) Assessment tool for human-robot interaction safety risks during construction operations. Journal of Construction Engineering and Management, 149(1): 04022145, ISSN 0733-9364

Okpala, I U (2022) Robotics and automation in construction: Developing foundational insight and tools to support safe implementation. PhD thesis, University of Alabama, USA.

Okunola, A; Akanmu, A A and Yusuf, A O (2025) Comparison of active and passive back-support exoskeletons for construction work: Range of motion, discomfort, usability, exertion and cognitive load assessments. Smart and Sustainable Built Environment, 14(3), pp. 582-598. ISSN 2046-6099

Okunola, O H (2020) Residents vulnerability analysis and explanation of development-induced disasters in a Sub-Saharan African city. International Journal of Disaster Resilience in the Built Environment, 11(1), pp. 71-84. ISSN 1759-5916

Oladimeji, O (2022) Influence of COVID-19 pandemic on local construction firms' viability. Journal of Engineering, Design and Technology, 20(1), pp. 201-221. ISSN 1726-0531

Oladiran, O; Hallam, P and Westlake, H (2025) Are the COVID-19 footprints fading? Analysing dynamics in work, corporate real estate strategies and building use. Building Research & Information, 53(7), pp. 929-947. ISSN 0961-3218

Olanrewaju, O I; Chileshe, N; Adekunle, E O and Salihu, C (2024) Modelling the environmental, economic and social impacts of coronavirus pandemic on the construction industry. International Journal of Construction Management, 24(14), pp. 1485-1498. ISSN 1562-3599

Olatunde, N A; Awodele, I A and Adebayo, B O (2022) Impact of COVID-19 pandemic on indigenous contractors in a developing economy. Journal of Engineering, Design and Technology, 20(1), pp. 267-280. ISSN 1726-0531

Olukolajo, M A; Oyetunji, A K and Oluleye, I B (2022) Covid-19 protocols: Assessing construction site workers compliance. Journal of Engineering, Design and Technology, 20(1), pp. 115-131. ISSN 1726-0531

Omatule Onubi, H; Yusof, N and Sanusi Hassan, A (2021) Perceived COVID-19 safety risk and safety behavior on construction sites: Role of safety climate and firm size. Journal of Construction Engineering and Management, 147(11): 04021153, ISSN 0733-9364

Oni, O Z; Olanrewaju, A and Khor, S C (2024) Sustainable model for improving construction industry health and safety practices. Journal of Construction Engineering and Management, 150(10): 04024137, ISSN 0733-9364

Ono, Eikichi (2025) Occupant-centric design for functional and thermal zoning at activity-based workspaces. PhD thesis, National University of Singapore, Singapore.

Onubi, H O; Hassan, A S; Yusof, N and Bahdad, A A S (2023) Moderating effect of project size on the relationship between COVID-19 safety protocols and economic performance of construction projects. Engineering, Construction and Architectural Management, 30(6), pp. 2206-2230. ISSN 0969-9988

Onubi, H O; Yusof, N; Hassan, A S and Bahdad, A A S (2023) Forecasting the schedule performance resulting from the adoption of social distancing in construction projects. Engineering, Construction and Architectural Management, 30(8), pp. 3731-3748. ISSN 0969-9988

Onyia, U; Egbu, C; Suresh, S and Renukappa, S (2023) The critical success factors to remote development of construction management skills and competencies in Nigeria. Journal of Engineering, Design and Technology, 21(2), pp. 343-357. ISSN 1726-0531

Oo, B L and Lim, B T H (2021) Changes in job situations for women workforce in construction during the COVID-19 pandemic. Construction Economics and Building, 21(2), pp. 34-57. ISSN 2204-9029

Oo, B L and Lim, B T H (2025) Working from home during the COVID-19 pandemic and gender differences: A case of construction workforce in Australia. Engineering, Construction and Architectural Management, 32(7), pp. 4439-4457. ISSN 0969-9988

Oo, B L; Lim, T H B and Zhang, Y (2021) Women workforce in construction during the COVID-19 pandemic: Challenges and strategies. Construction Economics and Building, 21(4), pp. 38-59. ISSN 2204-9029

Opdyke, A.; Latiph, A. A.; Shrief, M. C. and Yape, E. (2026) Displacement, infrastructure deficits and public health risks in post-conflict marawi during the COVID-19 pandemic. International Journal of Disaster Resilience in the Built Environment, 17(2), pp. 297-313. ISSN 1759-5908

Ophiyandri, T (2013) Project risk management for community-based post-disaster housing reconstruction. PhD thesis, University of Salford, UK.

Opiyo, Neema George (2022) Analysis of user (dis)engagement in the provision of affordable housing: Cases in the UK housing sector. PhD thesis, University of Manchester, UK.

Oppon, J A; Akomah, B B; Hagan, D E; Tieru, C K and Koufie, K (2025) Organizational culture and its impact on employees' safety. Construction Economics and Building, 25(3-4), pp. 121-142. ISSN 2204-9029

Ortiz, S S (2025) Strengthening construction supply chains: An exploration of decision-making frameworks for resilience in the face of black swan event. PhD thesis, Purdue University, Indiana, USA.

Osman, I A (2022) Impacts of global pandemics on construction projects and dispute resolution provisions. PhD thesis, University of Illinois at Chicago, USA.

Osunsanmi, T O; Aigbavboa, C O; Oke, A and Onyia, M E (2022) Making a case for smart buildings in preventing corona-virus: Focus on maintenance management challenges. International Journal of Construction Management, 22(16), pp. 3109-3118. ISSN 1562-3599

Osunsanmi, T O; Aigbavboa, C O; Thwala, W D D and Molusiwa, R (2022) Modelling construction 4.0 as a vaccine for ensuring construction supply chain resilience amid COVID-19 pandemic. Journal of Engineering, Design and Technology, 20(1), pp. 132-158. ISSN 1726-0531

Oswald, D; Smith, S and Sherratt, F (2015) Doing the 'funky chicken' to communicate on multinational projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Othman, A A E (2012) A study of the causes and effects of contractors' non-compliance with the health and safety regulations in the South African construction industry. Architectural Engineering and Design Management, 8(3), pp. 180-191. ISSN 1745-2007

Ouedraogo, A L S N; Messan, A; Yamegueu, D and Coulibaly, Y (2022) A model for thermal comfort assessment of naturally ventilated housing in the hot and dry tropical climate. International Journal of Building Pathology and Adaptation, 40(2), pp. 183-201. ISSN 23984708

Oyegoke, A S; Fisher, B W; Ajayi, S; Omotayo, T S and Ewuga, D (2024) The disruptive factors and longevity effects of covid-19 and brexit on the SMEs construction supply chain in the UK. Journal of Financial Management of Property and Construction, 29(1), pp. 115-134. ISSN 1366-4387

Padmasiri, Dinithi (2024) A qualitative investigation of information technology (it) managers' emotion regulation: Insights into the impact of organisational culture and work-family spillover. PhD thesis, University of New South Wales, Australia.

Pakjouei, S; Aryankhesal, A; Kamali, M; Seyedin, H and Heidari, M (2021) Positive effects of earthquake from the perspective of people with physical disability in Iran. International Journal of Disaster Resilience in the Built Environment, 12(2), pp. 157-169. ISSN 1759-5916

Palsodkar, M A; Pansare, R; Nagare, M R and Narwane, V (2025) Repurposing product development after COVID-19 by integrating industry 4.0 and agile new product development practices in emerging economies. Journal of Engineering, Design and Technology, 23(5), pp. 1592-1618. ISSN 1726-0531

Pamidimukkala, A.; Kermanshachi, S. and Adepu, N. (2026) Identifying critical factors that affected construction project performance during COVID-19. International Journal of Building Pathology and Adaptation, 44(3), pp. 553-566. ISSN 2398-4708

Park, J; Marks, E; Cho, Y K and Suryanto, W (2016) Performance test of wireless technologies for personnel and equipment proximity sensing in work zones. Journal of Construction Engineering and Management, 142(1): 04015049, ISSN 0733-9364

Parker, M A (2022) Developing a performance index to measure soft skills on construction projects: a Delphi study. PhD thesis, Aston University, UK.

Parkinson, T and de Dear, R (2016) Thermal pleasure in built environments: Spatial alliesthesia from contact heating. Building Research & Information, 44(3), pp. 248-262. ISSN 0961-3218

Parkinson, T and de Dear, R (2017) Thermal pleasure in built environments: Spatial alliesthesia from air movement. Building Research & Information, 45(3), pp. 320-335. ISSN 0961-3218

Patel, D A (2015) Estimating the number of fatal accidents and investigating the determinants of safety performance in indian construction. PhD thesis, Indian Institute of Technology Delhi, India.

Patil, M. P.; Salama, A. M.; Arnfield, J. and Alvanides, S. (2026) Youwalk-youreclaim: A co-assessment approach for active university campus environments. Smart and Sustainable Built Environment, 15(5), pp. 1663-1694. ISSN 2046-6099

Patriarca, A S (2013) Safety at the margins: A rhetorical analysis of occupational risk communication in construction. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Paul, B; Cattell, K; Edwards, P J and Marks, J (2010) Perceptions of HIV/AIDS policies and treatment programmes by Western Cape construction firms. Construction Management and Economics, 28(9), pp. 997-1006. ISSN 1466433X

Paunikar, A (1983) Performance constraints of housing prefabricators in India: 3 case studies. ArchD thesis, University of Michigan, USA.

Peiris, S and De Silva, N (2022) Re-engineered factory acceptance testing under the new normal. Built Environment Project and Asset Management, 12(5), pp. 754-774. ISSN 2044-124X

Pelsmakers, S and Warwick, E (2022) Housing adaptability: New research, emerging practices and challenges. Buildings & Cities, 3(1), pp. 605-618. ISSN 2632-6655

Pereira, E.; Penner, J. and Ghorab, K. (2026) Integrating energy-based safety with gamified experiential learning for hazard-recognition training. Journal of Construction Engineering and Management, 152(8): 04026129, ISSN 0733-9364

Perez Jimenez, P A (2019) An investigation into health and safety management by SMEs and the risk of corporate manslaughter prosecution. PhD thesis, University of Wolverhampton, UK.

Perttula, P; Merjama, J; Kiurula, M and Laitinen, H (2003) Accidents in materials handling at construction sites. Construction Management and Economics, 21(7), pp. 729-736. ISSN 01446193

Petcherdchoo, A (2004) Maintaining condition and safety of deteriorating bridges by probabilistic models and optimization. PhD thesis, University of Colorado at Boulder, USA.

Peters, T and Masoudinejad, S (2022) Balconies as adaptable spaces in apartment housing. Buildings & Cities, 3(1), pp. 265-278. ISSN 2632-6655

Pham, Thanh Tung (2021) The transfer of training among Australian construction workers participating in occupational health and safety training. PhD thesis, RMIT University, Australia.

Piao, Y; Xu, W; Wang, T K and Chen, J H (2021) Dynamic fall risk assessment framework for construction workers based on dynamic Bayesian network and computer vision. Journal of Construction Engineering and Management, 147(12): 04021171, ISSN 0733-9364

Pidgeon, A and Dawood, N (2023) Verification and validation of a framework for collaborative BIM implementation, measurement and management (cimm). Smart and Sustainable Built Environment, 12(4), pp. 847-871. ISSN 2046-6099

Pim-Wusu, M; Simpeh, E K and Simberi, J N N (2025) Ascertaining adequacy of fire suppression systems: The perspective of Accra central of Ghana. Journal of Engineering, Design and Technology, 23(3), pp. 917-934. ISSN 1726-0531

Pinheiro, A T K and Hokugo, A (2019) Effectiveness of early warning and community cooperation for evacuation preparedness from mega-risk type coastal hazard in childcare centers. International Journal of Disaster Resilience in the Built Environment, 10(4), pp. 260-275. ISSN 1759-5916

Pirzadeh, P and Lingard, H (2021) Working from home during the COVID-19 pandemic: Health and well-being of project-based construction workers. Journal of Construction Engineering and Management, 147(6): 04021048, ISSN 0733-9364

Platt, L S; Chen, X; Sabo-Attwood, T; Iovine, N; Brown, S and Pollitt, B (2024) Improving infection prevention briefing through predictive predesign: A computational approach to architectural programming by evaluating socioecological risk factors. Architectural Engineering and Design Management, 20(4), pp. 776-788. ISSN 1745-2007

Porto Valente, C; Morris, A and Wilkinson, S J (2022) Energy poverty, housing and health: The lived experience of older low-income australians. Building Research & Information, 50(1-2), pp. 6-18. ISSN 0961-3218

Pribadi, K S; Martek, I and Chan, T K (2023) Inequality and vulnerability of informal employment during the pandemic. Construction Economics and Building, 23(3-4), pp. 25-44. ISSN 2204-9029

Pritchard, C (2005) Skin cancer prevention in the house building industry. PhD thesis, Nottingham Trent University, UK.

Priyadarshini, Shalini (2025) Setu: Safety in excavation and trenching for you a training and decision-making support tool for worker safety in excavation and trenching operations in construction. PhD thesis, Carnegie Mellon University, USA.

Purushothaman, M B and Kumar, S (2022) Environment, resources, and surroundings based dynamic project schedule model for the road construction industry in New Zealand. Smart and Sustainable Built Environment, 11(2), pp. 294-312. ISSN 2046-6099

Qi, L; Zhai, H and Shuang, Q (2026) Attention-driven multiobject tracking for proactive fall safety management in construction. Journal of Construction Engineering and Management, 152(5): 04026052, ISSN 0733-9364

Qi, J (2011) Integration of construction worker fall safety in design through the use of building information modeling. PhD thesis, University of Florida, USA.

Rafieyan, A; Sarvari, H; Beer, M and Chan, D W M (2024) Determining the effective factors leading to incidence of human error accidents in industrial parks construction projects: Results of a fuzzy Delphi survey. International Journal of Construction Management, 24(7), pp. 748-760. ISSN 1562-3599

Rahi, K; Abu Baker, F; Preece, C and Abu Jadayil, W (2025) Scale to measure project resilience for the construction sector to cope with hazards. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 242-259. ISSN 1759-5908

Raidén, A B; Dainty, A R J and Neale, R H (2004) Exemplary human resource development (hrd) within a large construction contractor. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Raisbeck, P (2021) Taking the pulse: Developing a model of resilience capital for architectural firms. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Rajala, P; Ylä-Kujala, A; Sinkkonen, T and Kärri, T (2022) Profitability in construction: How does building renovation business fare compared to new building business. Construction Management and Economics, 40(3), pp. 223-237. ISSN 01446193

Raji, B (2018) Sustainable high-rises: Design strategies for energy-efficient and comfortable tall office buildings in various climates. PhD thesis, Delft University of Technology, Netherlands.

Ramalingam Rethnam, O. and Thomas, A. (2026) A physics-informed deep learning-based urban building thermal comfort modeling and prediction framework for identifying thermally vulnerable building stock. Smart and Sustainable Built Environment, 15(2), pp. 622-648. ISSN 2046-6099

Rana Abdollahi, R; Bagherzadeh, F; Schnabel, M A and Bakshi, N (2024) A design methodology to consider occupants' spatial adjustment and manage view content in adaptive façade design for improving visual comfort. Architectural Engineering and Design Management, 20(1), pp. 168-190. ISSN 1745-2007

Rankohi, S; Bourgault, M and Iordanova, I (2023) The new-normal challenges and IPD solutions: A Canadian case study. Built Environment Project and Asset Management, 13(1), pp. 20-35. ISSN 2044-124X

Rantsatsi, N P (2021) Improving construction health and safety agent collaboration and health and safety performance in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Rashidi, A; Woon, G L; Dasandara, M; Bazghaleh, M and Pasbakhsh, P (2025) Smart personal protective equipment for intelligent construction safety monitoring. Smart and Sustainable Built Environment, 14(3), pp. 835-858. ISSN 2046-6099

Rathi, R N; Tulasi Devi, S L and Rajamalla, A P (2025) Evaluating the impact of lockdowns and interest rate cuts on construction stock price returns: A did approach. International Journal of Construction Management, 25(16), pp. 2051-2062. ISSN 1562-3599

Razak, N A (2024) Development of safety leading and lagging indicators framework for contractor selection in construction projects. PhD thesis, University of Manchester, UK.

Razmak, J and Farhan, W (2026) A proposed digital transformation model for implementation by digital leaders. Smart and Sustainable Built Environment, 15(1), pp. 92-119. ISSN 2046-6099

Reiman, A; Møller Pedersen, L; Väyrynen, S; Airaksinen, O; Sormunen, E and Räsänen, T (2020) Multi-organisational approach to safety training: The case of a Finnish safety training park. Construction Management and Economics, 38(7), pp. 659-672. ISSN 01446193

Renukappa, S; Suresh, S; Shetty, N; Gandhi, L; Abdalla, W; Yabbati, N and Hiremath, R (2025) The role of smart cities in managing the COVID-19 outbreak in India. Smart and Sustainable Built Environment, 14(5), pp. 1459-1482. ISSN 2046-6099

Reyes Veras, P; Renukappa, S and Suresh, S (2022) Awareness of big data concept in the Dominican Republic construction industry: An empirical study. Construction Innovation, 22(3), pp. 465-486. ISSN 1471-4175

Ribón, J G T M (2020) Advanced monitoring of construction safety using UAS and positioning technologies. PhD thesis, Pontificia Universidad Catolica de Chile, Chile.

Riza, R (2014) Integration of wind catchers in modern residential buildings in the uae as a means of providing thermal comfort. PhD thesis, British University in Dubai, UAE.

Rizzi, Dario (2025) Tools for sustainable design strategies: Optimization of integrated BIM-blockchain technologies and protocols for the application of minimum environmental criteria. PhD thesis, Università degli Studi di Ferrara, Italy.

Robertson, C M (2018) Migrant worker perceptions of life, work, health and safety in Kuwait: A construction industry perspective. PhD thesis, Auckland University of Technology, New Zealand.

Robinson, Benjamin Tyrell (2021) Identifying and pricing risk in residential development. PhD thesis, RMIT University, Australia.

Rodger, D; Callaghan, N and Thomson, C (2018) Are retrofitted social houses sufficiently reflecting the holistic health and wellbeing requirements of older people? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Rodrigues, F; Antunes, F and Matos, R (2021) Safety plugins for risks prevention through design resourcing BIM. Construction Innovation, 21(2), pp. 244-258. ISSN 1471-4175

Rodrigues, L; Tubelo, R; Vega Pasos, A; Gonçalves, J C S; Wood, C and Gillott, M (2021) Quantifying airtightness in Brazilian residential buildings with focus on its contribution to thermal comfort. Building Research & Information, 49(6), pp. 639-660. ISSN 0961-3218

Ronny, R and Ptak, J S (2012) Localised solutions developed to suit South African challenges. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 5-11. ISSN 17514312

Roskams, M J and Haynes, B P (2021) Testing the relationship between objective indoor environment quality and subjective experiences of comfort. Building Research & Information, 49(4), pp. 387-398. ISSN 0961-3218

Rubio-Romero, J C; Rubio, M C and García-Hernández, C (2013) Analysis of construction equipment safety in temporary work at height. Journal of Construction Engineering and Management, 139(1), pp. 9-14. ISSN 0733-9364

Rungjang, K (2013) Public investment for developing port facilities within competitive market. PhD thesis, University of Wisconsin - Madison, USA.

Sadeghi, H; Cheung, C M; Yunusa-Kaltungo, A and Manu, P (2024) Occupational safety and health in modular integrated construction: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Sadeghi, J; Oghabi, M; Sarvari, H; Sabeti, M S; Kashefi, H; Chan, D W M and Lotfata, A (2023) A hybrid risk assessment approach for assessing the earthquake risks in worn-out urban fabrics: A case study in Iran. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 193-211. ISSN 1759-5916

Sadeh, H; Mirarchi, C; Shahbodaghlou, F and Pavan, A (2023) Predicting the trends and cost impact of COVID-19 OSHA citations on US construction contractors using machine learning and simulation. Engineering, Construction and Architectural Management, 30(8), pp. 3461-3479. ISSN 0969-9988

Sailer, K; Thomas, M and Pachilova, R (2023) The challenges of hybrid work: An architectural sociology perspective. Buildings & Cities, 4(1), pp. 650-668. ISSN 2632-6655

Sailer, K; Utley, M; Pachilova, R; Fouad, A T Z; Li, X; Jayaram, H and Foster, P J (2025) Lanes, clusters, sightlines: Modelling patient flow in medical clinics. Buildings & Cities, 6(1), pp. 201-218. ISSN 2632-6655

Salami, B A; Ajayi, S O and Oyegoke, A S (2022) Coping with the covid-19 pandemic: An exploration of the strategies adopted by construction firms. Journal of Engineering, Design and Technology, 20(1), pp. 159-182. ISSN 1726-0531

Salami, B A; Ajayi, S O and Oyegoke, A S (2023) Tackling the impacts of covid-19 on construction projects: An exploration of contractual dispute avoidance measures adopted by construction firms. International Journal of Construction Management, 23(7), pp. 1196-1204. ISSN 1562-3599

Salas, R I (2020) Empirical evaluation of construction safety: Insights from economic trends, national cultures and workplace injury rates. PhD thesis, University of Colorado at Boulder, USA.

Salih, F; Eissa, R and El-Adaway, I H (2024) Data-driven analysis of progressive design build in water and wastewater infrastructure projects. Journal of Construction Engineering and Management, 150(1): 04023149, ISSN 0733-9364

Salih, F and El-Adaway, I H (2024) Quantifying the impact of technology utilization on schedule and cost performance in construction projects. Journal of Construction Engineering and Management, 150(8): 04024078, ISSN 0733-9364

Salminen, S (1995) Serious occupational accidents in the construction industry. Construction Management and Economics, 13(4), pp. 299-306. ISSN 01446193

Sami Ur Rehman, M; Shafiq, M T and Afzal, M (2022) Impact of COVID-19 on project performance in the UAE construction industry. Journal of Engineering, Design and Technology, 20(1), pp. 245-266. ISSN 1726-0531

Samsurijan, M S; Radin Firdaus, R B; Rohayati, M I; Ebekozien, A and Aigbavboa, C (2025) Moderating effect of government policy on the relationship between low-cost housing demand-supply gap and COVID-19 impact. Smart and Sustainable Built Environment, 14(1), pp. 72-92. ISSN 2046-6099

Sano, H; Chiba, Y; Maeda, S; Ikeda, C; Handa, N; Miura, S and Usuda, Y (2023) Survey on the dissemination of web-based information on "evacuation and sheltering" in the context of COVID-19 by the Japanese government. International Journal of Disaster Resilience in the Built Environment, 14(1), pp. 68-84. ISSN 1759-5916

Sanseverino, Anna (2023) Application of BIM methodology for structural inspection and maintenance eco-systems: Semi-automated monitoring procedures to implement different kinds of data into enriched cooperative systems. PhD thesis, Università degli Studi di Salerno, Italy.

Santero, N J (2009) Pavements and the environment: A life-cycle assessment approach. PhD thesis, University of California, Berkeley, USA.

Sarel, L; Aggarwal, C and Porwal, V (2010) Fatalities of hispanic workers: Safety initiatives taken by U.S. Construction companies to address linguistic and cultural issues. International Journal of Construction Education and Research, 6(4), pp. 271-284. ISSN 1557-8771

Sari, L H; Kayan, B A and Zahriah, Z (2024) An assessment of indoor environmental quality in COVID-19 affected houses: A case study in Banda Aceh, Indonesia. International Journal of Building Pathology and Adaptation, 42(5), pp. 932-956. ISSN 2398-4708

Schiller, G; Blum, A; Hecht, R; Oertel, H; Ferber, U and Meinel, G (2021) Urban infill development potential in Germany: Comparing survey and GIS data. Buildings & Cities, 2(1), pp. 36-54. ISSN 2632-6655

Seneviratne, K; Perera, S; Ginigaddara, B; Jin, X; Tang, L and Osei Kyei, R (2024) Good practices in COVID-19 risk reduction adopted by Australian construction enterprises. Built Environment Project and Asset Management, 14(3), pp. 449-469. ISSN 2044-124X

Sepasgozar, S M E; Davis, S; Loosemore, M and Bernold, L (2018) An investigation of modern building equipment technology adoption in the Australian construction industry. Engineering, Construction and Architectural Management, 25(8), pp. 1075-1091. ISSN 0969-9988

Seresht, N G and RazaviAlavi, S (2021) A framework to model the spread of infectious diseases on construction sites using hybrid agent-based modelling and Monte Carlo simulation. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Serne, J N (2024) Attributing cause for occupational accidents in construction: A descriptive single case study. PhD thesis, Grand Canyon University, USA.

Shahda, M M and Megahed, N A (2023) Post-pandemic architecture: A critical review of the expected feasibility of skyscraper-integrated vertical farming (sivf). Architectural Engineering and Design Management, 19(3), pp. 283-304. ISSN 1745-2007

Shang, G; Low, S P and Lim, X Y V (2023) Prospects, drivers of and barriers to artificial intelligence adoption in project management. Built Environment Project and Asset Management, 13(5), pp. 629-645. ISSN 2044-124X

Sharqi, R I A (2017) Developing a system for health and safety enhancement and automation in construction sites. PhD thesis, Heriot-Watt University, UK.

Shayboun, M; Kifokeris, D and Koch, C (2020) Machine learning for analysis of occupational accidents registration data. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Shayboun, M; Koch, C and Kifokeris, D (2021) A comparison of accident causation models (ACMS) and machine learning (ML) for applied analysis within accident reports. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Shen, X (2017) Location-based leading indicators in BIM for construction safety. PhD thesis, University of Alabama, USA.

Shen, X and Marks, E (2016) Near-miss information visualization tool in BIM for construction safety. Journal of Construction Engineering and Management, 142(4): 04015100, ISSN 0733-9364

Shen, X; Marks, E; Pradhananga, N and Cheng, T (2016) Hazardous proximity zone design for heavy construction excavation equipment. Journal of Construction Engineering and Management, 142(6): 05016001, ISSN 0733-9364

Sherif, A and Iskandar, M (2025) Design of hospitals for the post-pandemic era: an international survey of design professionals on infection control design strategies. Architectural Engineering and Design Management, 21(4), pp. 705-720. ISSN 1745-2007

Sherratt, F; Crapper, M; Foster-Smith, L and Walsh, S (2015) Safety and volunteer construction workers. Construction Management and Economics, 33(5-6), pp. 361-374. ISSN 01446193

Sherratt, F and Dainty, A (2023) The power of a pandemic: How COVID-19 should transform UK construction worker health, safety and wellbeing. Construction Management and Economics, 41(5), pp. 379-386. ISSN 01446193

Shi, Z (2024) A BIM-based and data-driven approach for comprehensive façade inspection guidance in cities. PhD thesis, New York University Tandon School of Engineering, USA.

Shih, N J and Huang, Y S (2001) A study of reflection glare in taipei. Building Research & Information, 29(1), pp. 30-39. ISSN 0961-3218

Shih, R C S; Gayley, A and Doro-on, A M (2005) Risk analysis of terrorism on U.S. Cargo transportation infrastructure. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Shiha, A and Dorra, E M (2023) Resilience index framework for the construction industry in developing countries. Journal of Construction Engineering and Management, 149(4): 04023008, ISSN 0733-9364

Shimoda, Y (2003) Adaptation measures for climate change and the urban heat island in japan's built environment. Building Research & Information, 31(3-4), pp. 222-230. ISSN 0961-3218

Short, C A; Noakes, C J; Gilkeson, C A and Fair, A (2014) Functional recovery of a resilient hospital type. Building Research & Information, 42(6), pp. 657-684. ISSN 0961-3218

Short, C A; Woods, A W; Drumright, L; Zia, R and Mingotti, N (2022) An alternative approach to delivering safe, sustainable surgical theatre environments. Buildings & Cities, 3(1), pp. 316-333. ISSN 2632-6655

Shuang, Q; Liu, X; Wang, Z and Xu, X (2024) Automatically categorizing construction accident narratives using the deep-learning model with a class-imbalance treatment technique. Journal of Construction Engineering and Management, 150(9): 04024107, ISSN 0733-9364

Siemons, J C M M (1992) Occupational safety and health policy implementation: A comparison between Japan and the Netherlands. PhD thesis, University of Twente, Netherlands.

Sierra, F (2022) COVID-19: Main challenges during construction stage. Engineering, Construction and Architectural Management, 29(4), pp. 1817-1834. ISSN 0969-9988

Silva, Renata Moreira de Sa e (2023) Contributions of psychodynamics of work to health and safety management in civil construction works. PhD thesis, Universidade de Brasília, Brazil.

Silvestri, A; Paraciani, N and Villani, T (2021) Performance evaluation of textile materials for lightweight envelopes in minor sports facilities and their impact on indoor comfort. Architectural Engineering and Design Management, 17(3-4), pp. 347-359. ISSN 1745-2007

Simmons, K M and Sutter, D (2007) Tornado shelters and the housing market. Construction Management and Economics, 25(11), pp. 1119-1126. ISSN 01446193

Simon, M and Meyer, E L (2012) Low cost I-V system employing variable power supply unit as an electronic load. Journal of Engineering, Design and Technology, 10(3), pp. 330-344. ISSN 1726-0531

Simpeh, F and Amoah, C (2022) COVID-19 guidelines incorporated in the health and safety management policies of construction firms. Journal of Engineering, Design and Technology, 20(1), pp. 6-23. ISSN 1726-0531

Simpeh, F and Amoah, C (2023) Assessment of measures instituted to curb the spread of COVID-19 on construction site. International Journal of Construction Management, 23(3), pp. 383-391. ISSN 1562-3599

Simpeh, F; Bamfo-Agyei, E and Amoah, C (2022) Barriers to the implementation of COVID-19 safety regulations: Insight from Ghanaian construction sites. Journal of Engineering, Design and Technology, 20(1), pp. 47-65. ISSN 1726-0531

Simukonda, W (2019) Occupational health and safety practices among contractors in Malawi: A generic overview. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 118-124. ISSN 17514304

Sing, C P; Love, P E D; Fung, I W H and Edwards, D J (2014) Personality and occupational accidents: Bar benders in Guangdong Province, Shenzhen, China. Journal of Construction Engineering and Management, 140(7): 05014005, ISSN 0733-9364

Singh, V and Bolpagni, M (2023) Effects of trigger events on innovation behaviour: Insights from the data collected from construction professionals during COVID-19. Construction Management and Economics, 41(7), pp. 587-607. ISSN 01446193

Singh Rajput, T and Thomas, A (2023) Optimizing passive design strategies for energy efficient buildings using hybrid artificial neural network (ann) and multi-objective evolutionary algorithm through a case study approach. International Journal of Construction Management, 23(13), pp. 2320-2332. ISSN 1562-3599

Sinoeurn, D and Panuwatwanich, K (2023) Development and evaluation of cloud-based virtual reality for design evaluation: Multicriteria comparative analysis. Smart and Sustainable Built Environment, 12(5), pp. 1198-1225. ISSN 2046-6099

Sivapragasam, C; Ajith, S and Arumugaprabu, V (2023) A conceptual framework for minimizing construction site accidents using task-personnel nexus matrix. International Journal of Construction Management, 23(9), pp. 1603-1610. ISSN 1562-3599

Sloan Wood, O; Lupenza, E; Agnello, D M; Knudsen, J B; Msellem, M; Schiøler, K L and Saleh, F (2025) Co-creating interventions to prevent mosquito-borne disease transmission in hospitals. Buildings & Cities, 6(1), pp. 819-840. ISSN 2632-6655

Smallwood, J (1998) Client influence on contractor health and safety in South Africa. Building Research & Information, 26(3), pp. 181-189. ISSN 0961-3218

Smallwood, J (2006) Scaffolding health and safety: A multi-stakeholder issue. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Smallwood, J (2007) The influence of architectural designers on construction ergonomics. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Smallwood, J and Deacon, C (2001) The role of health and safety culture in construction. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Smallwood, J and Venter, D (2001) The role of the media in South African construction health and safety. Construction Economics and Building, 1(2), pp. 37-46. ISSN 2204-9029

Smallwood, J J and Emuze, F (2016) Factors that promote zero fatalities, injuries, and disease in construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Smyth, H; Duryan, M and Kusuma, I (2019) Service design for marketing in construction: Tactical implementation in the "business development management". Built Environment Project and Asset Management, 9(1), pp. 87-99. ISSN 2044-124X

Soliman, E; Al-Tabtabai, H; Almusalam, A and Hussein, M (2023) Impact of COVID-19 on labor's motivational factors and construction productivity. International Journal of Construction Management, 23(15), pp. 2699-2708. ISSN 1562-3599

Solomon, T (2021) Change blindness in the construction industry. PhD thesis, George Mason University, USA.

Song, S (2017) Construction equipment travel path visualization and productivity evaluation. PhD thesis, University of Alabama, USA.

Song, Y (2022) Resilience bonds and the financing of resilient infrastructure. PhD thesis, University College London, UK.

Soomro, B A and Shah, N (2022) Environmental concerns among the entrepreneurs: A disaster resilience and environment building during the second wave of the COVID-19. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 516-530. ISSN 1759-5916

Sorooshnia, E; Rashidi, M; Rahnamayiezekavat, P; Rezaei, F and Samali, B (2023) Optimum external shading system for counterbalancing glare probability and daylight illuminance in sydney's residential buildings. Engineering, Construction and Architectural Management, 30(1), pp. 296-320. ISSN 0969-9988

Soto Ortiz, S.; Kang, K.; Hubbard, B. and Besiktepe, D. (2026) Supply chain disruption risks in U.S. Construction industry: Post-pandemic perspectives. Construction Management and Economics, 44(9), pp. 703-720. ISSN 0144-6193

Speiser, K and Teizer, J (2024) Automatic creation of personalised virtual construction safety training in digital twins. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(4), pp. 173-183. ISSN 17514304

Stewart, L (2022) Business strategies for reducing professional labor shortages within the u.S. Construction industry. DBA thesis, Walden University, USA.

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Stride, M; Renukappa, S; Suresh, S and Egbu, C (2023) The effects of COVID-19 pandemic on the UK construction industry and the process of future-proofing business. Construction Innovation, 23(1), pp. 105-128. ISSN 1471-4175

Sudarsan, J S; Rajprasad, J; V. Gedam, V; A. Abhyankar, A; S. Sriram, N and Dharaskar, S (2026) Resilient and sustainable construction industry: Leveraging crisis and lean management. International Journal of Construction Management, 26(2), pp. 219-233. ISSN 1562-3599

Sudprasert, S (2021) Utilization of an evaporative air cooler to achieve thermal comfort in Thailand. Building Research & Information, 49(3), pp. 325-335. ISSN 0961-3218

Sun, J; Murphy, M R; Hazlett, D G; Shuai, C and Gao, L (2025) Simulation-based framework for predicting construction workforce demand: A comparative analysis with multivariate LSTM-based seq2seq model. Journal of Construction Engineering and Management, 151(6): 04025049, ISSN 0733-9364

Suresh, S; Renukappa, S; Alghanmi, I; Mushatat, S and Olayinka, R (2017) Examining the satisfaction level of construction workers regarding safety management in the kingdom of Saudi Arabia. Journal of Construction in Developing Countries, 22(1), pp. 97-113. ISSN 1823-6499

Suresh, S; Renukappa, S; Stride, M; Nicola Toor, R and Khan, A (2025) Women in the UK construction industry: Are we still clinging to the "old boys club"? Engineering, Construction and Architectural Management, 32(1), pp. 214-236. ISSN 0969-9988

Sutterby, P; Wang, X; Li, H X and Ji, Y (2023) The impact of COVID-19 on construction supply chain management: An Australian case study. Engineering, Construction and Architectural Management, 30(8), pp. 3098-3122. ISSN 0969-9988

Sutton, R M (2019) The development of a sustainable construction design process. PhD thesis, University of Liverpool, UK.

Symonds, P; Simpson, C H; Petrou, G; Ferguson, L; Mavrogianni, A and Davies, M (2024) Linking housing, socio-demographic, environmental and mental health data at scale. Buildings & Cities, 5(1), pp. 470-488. ISSN 2632-6655

Taheriattar, Reza (2018) Sustainability and adaptable/flexible infrastructure. PhD thesis, University of New South Wales, Australia.

Taiebat, M (2011) Tuning up BIM for safety analysis proposing modeling logics for application of BIM in DfS. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Talabi, B O (2016) Achieving safer behaviours of frontline construction workers: The role of supervisors. PhD thesis, Loughborough University, UK.

Tam, V W Y; Fung, I W H; Jorge Evangelista, A C J and Wong, S W L (2025) Assistant robotic machine for Hong Kong construction industry. International Journal of Construction Management, 25(14), pp. 1749-1754. ISSN 1562-3599

Tam, C M; Fung, I W H and Chan, A P C (2001) Study of attitude changes in people after the implementation of a new safety management system: The supervision plan. Construction Management and Economics, 19(4), pp. 393-403. ISSN 01446193

Tambwe, O T; Aigbavboa, C O and Akinradewo, O (2025) Benefits of construction data risks management in the construction industry. Journal of Engineering, Design and Technology, 23(2), pp. 458-476. ISSN 1726-0531

Tan, S Y and Zainon, N (2023) Impact of COVID-19 pandemic on the quantity surveying practices in Malaysia. Engineering, Construction and Architectural Management, 30(8), pp. 3480-3508. ISSN 0969-9988

Tandon, U; Mittal, A; Bhandari, H and Bansal, K (2022) E-learning adoption by undergraduate architecture students: Facilitators and inhibitors. Engineering, Construction and Architectural Management, 29(10), pp. 4287-4312. ISSN 0969-9988

Tang, Y; Liu, C; Feng, K; Yang, X; Li, X and Leng, X (2025) Identifying struck-by hazards in unknown lifting loads: A hybrid computer vision approach. Journal of Construction Engineering and Management, 151(10): 04025146, ISSN 0733-9364

Tansey, P and Spillane, J (2016) From crisis to opportunity: Turnaround strategies of large Irish construction contractors during the period 2007-2015. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Tarpio, J; de la Rosa, R C and Pelsmakers, S (2025) Promoting resilience in Finland: Built environment professionals' perspectives. Building Research & Information, 53(3), pp. 305-322. ISSN 0961-3218

Tea, S; Panuwatwanich, K; Ruthankoon, R and Kaewmoracharoen, M (2022) Multiuser immersive virtual reality application for real-time remote collaboration to enhance design review process in the social distancing era. Journal of Engineering, Design and Technology, 20(1), pp. 281-298. ISSN 1726-0531

Techera, U; Hallowell, M; Littlejohn, R and Rajendran, S (2018) Measuring and predicting fatigue in construction: Empirical field study. Journal of Construction Engineering and Management, 144(8): 04018062, ISSN 0733-9364

Tehrani, B M; Wang, J and Truax, D (2022) Assessment of mental fatigue using electroencephalography (EEG) and virtual reality (VR) for construction fall hazard prevention. Engineering, Construction and Architectural Management, 29(9), pp. 3593-3616. ISSN 0969-9988

Teizer, J (2006) Real-time spatial modeling to detect and track resources on construction sites. PhD thesis, University of Texas at Austin, USA.

Teizer, J (2016) Right-time vs real-time pro-active construction safety and health system architecture. Construction Innovation, 16(3), pp. 253-280. ISSN 1471-4175

Tekin, H (2022) The impact of COVID-19 on construction labor productivity: The case of Turkey. Engineering, Construction and Architectural Management, 29(9), pp. 3775-3806. ISSN 0969-9988

Teller, J (2021) Urban density and covid-19: Towards an adaptive approach. Buildings & Cities, 2(1), pp. 150-165. ISSN 2632-6655

Tenah, K A (1979) Construction management information control systems (CMICS). PhD thesis, Texas A&M University, USA.

Teng, Y; Li, Z; Cai, J and Ju, M (2023) Sustainability evaluation of the prefabricated medical emergency buildings' renovation scheme after the COVID-19. Engineering, Construction and Architectural Management, 30(8), pp. 3390-3415. ISSN 0969-9988

Tente, P; Misheng'u Mwanaumo, E and Didibhukut Thwala, W (2023) Sources and control measures of crystalline silica dust in a road and building project in Zambia. Journal of Construction Business and Management, 6(1), pp. 43-52. ISSN 2521-0165

Teo, A L E; Ofori, G; Tjandra, I K and Kim, H (2016) Design for safety: Theoretical framework of the safety aspect of BIM system to determine the safety index. Construction Economics and Building, 16(4), pp. 1-18. ISSN 2204-9029

Teo, E A L and Feng, Y (2011) Costs of construction accidents to Singapore contractors. International Journal of Construction Management, 11(3), pp. 79-92. ISSN 1562-3599

Thakore, A Y; Iyer, M; Mishra, G and Doshi, S (2024) Resilient WASH development for urban poor: The case of Ahmedabad slums. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 19-44. ISSN 1759-5916

Tharun, T; Thounaojam, N; Devkar, G and Laishram, B (2025) Proactive contract theory-based resilience framework development for public-private partnerships. Construction Economics and Building, 25(2), pp. 253-275. ISSN 2204-9029

Thi Binh, A D; Asif, M S; Fan, Y; Thi Cam, H L and Quang, H T (2026) The domino effect of risks on supply chain performance in disruptive times. International Journal of Construction Management, 26(4), pp. 583-603. ISSN 1562-3599

Thomas, L; Woods, A; Powles, R; Kalali, P and Wilkinson, S (2022) Residential geothermal air-conditioning: Inhabitants' comfort, behaviour and energy use. Buildings & Cities, 3(1), pp. 226-249. ISSN 2632-6655

Thompson, D.; Chileshe, N.; Coggins, J. and Stevels, A. (2025) COVID-19 challenges on construction-related SMEs and response strategies: A scoping review. International Journal of Construction Management, 25(14), pp. 1649-1659. ISSN 1562-3599

Thompson, D; Chileshe, N; Coggins, J and Stevels, A (2023) Strategic management practices and opportunities for adapting SMEs to construction industry conditions: Towards a qualitative grounded conceptual framework. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Thompson, O (2020) Towards a comprehensive understanding of human behaviour in dwelling fires. PhD thesis, University of Greenwich, UK.

Tian, Z; Yu, Y; Xu, F and Zhang, Z (2023) Dynamic hazardous proximity zone design for excavator based on 3D mechanical arm pose estimation via computer vision. Journal of Construction Engineering and Management, 149(7): 04023048, ISSN 0733-9364

Tokazhanov, G; Tokbolat, S; Tleuken, A and Karaca, F (2024) The pandemic readiness assessment of building design and engineering service-related legislation in Kazakhstan and the EU. Engineering, Construction and Architectural Management, 31(4), pp. 1585-1607. ISSN 0969-9988

Tommelein, I D (2020) Design science research in construction management: Multi-disciplinary collaboration on the SightPlan system. Construction Management and Economics, 38(4), pp. 340-354. ISSN 01446193

Tonetto, M S; Formoso, C T; Saurin, T A; Bonesi De Luca, F; Lora, F P and Lantelme, E (2024) Resilient performance on construction projects in the post-pandemic era: An organizational perspective. Engineering, Construction and Architectural Management, 31(12), pp. 5007-5028. ISSN 0969-9988

Tong, R; Wang, L; Cao, L; Zhang, B and Yang, X (2023) Psychosocial factors for safety performance of construction workers: Taking stock and looking forward. Engineering, Construction and Architectural Management, 30(2), pp. 944-962. ISSN 0969-9988

Tong, T K L and Tam, C M (2003) Fuzzy optimisation of labour allocation by genetic algorithms. Engineering, Construction and Architectural Management, 10(2), pp. 146-155. ISSN 0969-9988

Toole, T M (2002) Construction site safety roles. Journal of Construction Engineering and Management, 128(3), pp. 203-210. ISSN 0733-9364

Tregloan, K; Thompson, J; Holland, S and Song, H (2024) Unreal … a typology for learning from virtual site visits. International Journal of Construction Education and Research, 20(3), pp. 301-321. ISSN 15578771

Tripathi, P and Mittal, Y K (2025) Risk assessment and ranking methodology for occupational hazards in construction: A case of Indian high-rise projects. Smart and Sustainable Built Environment, 14(6), pp. 1927-1949. ISSN 2046-6099

Trompf, Peggy (2012) Another brick in the wall: Responses of the state to workplace fatalities in the New South Wales construction industry. PhD thesis, University of Sydney, Australia.

Tsz Wai, C; Wai Yi, P; Ibrahim Olanrewaju, O; Abdelmageed, S; Hussein, M; Tariq, S and Zayed, T (2023) A critical analysis of benefits and challenges of implementing modular integrated construction. International Journal of Construction Management, 23(4), pp. 656-668. ISSN 1562-3599

Tymvios, N and Gambatese, J A (2016) Direction for generating interest for design for construction worker safety: a Delphi study. Journal of Construction Engineering and Management, 142(8): 4016024, ISSN 0733-9364

Tymvios, N and Gambatese, J A (2016) Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners. Journal of Construction Engineering and Management, 142(2): 04015078, ISSN 0733-9364

Tymvios, N; Smithwick, J and Behm, M (2025) Re-evaluating falls through skylights in the USA: has anything changed? Journal of Engineering, Design and Technology, 23(4), pp. 1137-1155. ISSN 1726-0531

Uddin, S M J (2023) Leveraging social media platforms and generative AI technologies for construction industry applications. PhD thesis, North Carolina State University, USA.

Uddin, S M J; Albert, A; Tamanna, M and Alsharef, A (2023) Youtube as a source of information: Early coverage of the COVID-19 pandemic in the context of the construction industry. Construction Management and Economics, 41(5), pp. 402-427. ISSN 01446193

Ulubeyli, S; Arslan, V and Kivrak, S (2014) Cartoons on occupational health and safety: Semiotic analysis of workers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2017) Low-cost ergonomic intervention for mitigating physical and subjective discomfort during manual rebar tying. Journal of Construction Engineering and Management, 143(10): 04017075, ISSN 0733-9364

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2018) Proactive safety measures: Quantifying the upright standing stability after sustained rebar tying postures. Journal of Construction Engineering and Management, 144(4): 04018010, ISSN 0733-9364

Usman, W. I.; Mazher, K. M.; Umer, W.; Wuni, I. Y.; Alshibani, A.; Ghaithan, A.; Nasir, A. R. and Mohammed, A. (2026) BIM-based construction accidents knowledge database management system: Centralized accessible information repository for enhanced learning from the past. Journal of Construction Engineering and Management, 152(9): 04026149, ISSN 0733-9364

V Nithyapriyadharshini (2017) A study on the workplace issues faced by women labours in the construction industry in Chennai city. PhD thesis, Mother Teresa Womens University, India.

Valitabar, M; GhaffarianHoseini, A; GhaffarianHoseini, A and Attia, S (2022) Advanced control strategy to maximize view and control discomforting glare: A complex adaptive façade. Architectural Engineering and Design Management, 18(6), pp. 829-849. ISSN 1745-2007

Vallis, S A; Karvonen, A and Eriksson, E (2023) Pandemics and the built environment: A human-building interaction typology. Buildings & Cities, 4(1), pp. 158-173. ISSN 2632-6655

Vargas, C A (1998) Investigating construction falls using fault tree analysis and developing a prototype tool to reduce falls using expert system and computer-assisted instruction methods. PhD thesis, Ohio State University, USA.

Velikova, M; Baker, H and Smith, S D (2018) The meaning of failure: Establishing a taxonomy of failure in the construction industry to improve organisational learning. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Vellei, M; Ramallo-González, A P; Coley, D; Lee, J; Gabe-Thomas, E; Lovett, T and Natarajan, S (2017) Overheating in vulnerable and non-vulnerable households. Building Research & Information, 45(1-2), pp. 102-118. ISSN 0961-3218

Venkatesh, P and Ergan, S (2023) Classification of challenges in achieving BIM-based safety-requirement checking in vertical construction projects. Journal of Construction Engineering and Management, 149(12): 04023131, ISSN 0733-9364

Verhaart, J; Veselý, M and Zeiler, W (2015) Personal heating: Effectiveness and energy use. Building Research & Information, 43(3), pp. 346-354. ISSN 0961-3218

Vohmann, B (2023) Undergraduate built environment courses and the post-COVID legacy for learning. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Wade III, L R (2004) Effect of exposure to an inclined surface and height on gait kinematics and postural stability. PhD thesis, Auburn University, USA.

Wall, J; Carney, M; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E; Önwy-Yazici, E and Jordan, A (2007) The delivery of health and safety training applying multiple intelligences using virtual classes. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Wamuziri, S (2011) Evaluation of workplace drug testing in UK civil engineering construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(3), pp. 147-157. ISSN 17514312

Wang, Z; Yan, X; Liu, Q; Ma, X and Li, H (2026) Vision-based collision prevention on construction sites: Integrating trajectory prediction and uncertainty modeling. Journal of Construction Engineering and Management, 152(1): 04025214, ISSN 0733-9364

Wang, H-H (2010) A context-based representation and reasoning formalism to support construction safety planning. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Wang, J; Li, H; Han, S; Wang, G and Ren, W (2025) Contactless vital-sign monitoring of construction machinery operators using millimeter-wave technology. Journal of Construction Engineering and Management, 151(1): 04024182, ISSN 0733-9364

Wang, L; Rong, X and Mu, L (2023) The spatial pattern and dynamic evolution of basic public service level in Beijing-tianjin-hebei region from the perspective of covid-19. Engineering, Construction and Architectural Management, 30(8), pp. 3438-3460. ISSN 0969-9988

Wang, P; Fenn, P and Wang, K (2024) A novel approach for construction disputes causal inferences based on empirical data: A case-controlled method combined with Bradford Hill criteria. Engineering, Construction and Architectural Management, 31(11), pp. 4625-4644. ISSN 0969-9988

Wang, P; Wang, K; Huang, Y; Zhu, J; Fenn, P and Zhang, Y (2023) Payment issues in China's construction industry: Nature, causes, and a predictive model. Journal of Construction Engineering and Management, 149(1): 04022144, ISSN 0733-9364

Wang, W; Gao, S; Mi, L; Xing, J; Shang, K; Qiao, Y; Fu, Y; Ni, G and Xu, N (2021) Exploring the adoption of BIM amidst the COVID-19 crisis in China. Building Research & Information, 49(8), pp. 930-947. ISSN 0961-3218

Wang, Y; Deng, X and Mao, H (2023) The optimization of personnel localization management on international construction projects: Cases study from China enterprises. Engineering, Construction and Architectural Management, 30(8), pp. 3259-3291. ISSN 0969-9988

Watson, M; Deshpande, N and Lasch, C (2025) Disaster vulnerability of the construction industry: Comparing impacts of hurricanes and the COVID-19 pandemic on Florida construction companies. Construction Management and Economics, 43(5), pp. 323-339. ISSN 0144-6193

Waziri, N H; Usman, A M and Enaburekhan, J S (2015) Optimum temperature and solar radiation periods for kano using flat plate collector. Journal of Engineering, Design and Technology, 13(4), pp. 570-578.

Weber, I and Isatto, E L (2025) Performance metrics for the corrective building maintenance of hospital facilities. Building Research & Information, 53(5), pp. 582-599. ISSN 0961-3218

Weerasinghe, A S; Rasheed, E O and Rotimi, J O B (2022) Evaluating how social psychological aspects affect the choices of occupant behaviours: A modified motivation, opportunity and ability framework approach. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Wei, F; Hwang, B G; Zainal, N S B and Zhu, H (2024) Trust, team effectiveness, and strategies: A comparative study between virtual and face-to-face teams. Journal of Construction Engineering and Management, 150(7): 04024065, ISSN 0733-9364

Wei, L; Liu, G; Liu, W; Li, W and Yuan, Y (2023) Airborne infection risk in classrooms based on environment and occupant behavior measurement under COVID-19 epidemic. Building Research & Information, 51(6), pp. 701-716. ISSN 0961-3218

Weigend Rodríguez, R; Pomponi, F; Webster, K and D'Amico, B (2020) The future of the circular economy and the circular economy of the future. Built Environment Project and Asset Management, 10(4), pp. 529-546. ISSN 2044-124X

Wetzel, E M (2016) The use of a BIM-based framework to support safe facility management processes. PhD thesis, Virginia Tech, USA.

Wijeratne, W M P U; Perera, B A K S and De Silva, L (2014) Identification and assessment risks in maintenance operations. Built Environment Project and Asset Management, 4(4), pp. 384-405. ISSN 2044-124X

Willems, S; Saelens, D and Heylighen, A (2024) How to investigate differences in indoor environmental comfort and adaptation? Mixed methods research with patients. Building Research & Information, 52(8), pp. 851-869. ISSN 0961-3218

Williams, P (1999) The successful management of air conditioned environments for the construction industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Winch, G and Carr, B (2001) Benchmarking on-site productivity in France and the UK: A CALIBRE approach. Construction Management and Economics, 19(6), pp. 577-590. ISSN 01446193

Windapo, A (2013) Relationship between degree of risk, cost and level of compliance to occupational health and safety regulations in construction. Construction Economics and Building, 13(2), pp. 67-82. ISSN 2204-9029

Withrow, J; Dadi, G; Nassereddine, H and Sturgill, R (2024) Asphalt material e-ticketing workflow: Qualitative and quantitative analysis. Journal of Construction Engineering and Management, 150(3): 04023164, ISSN 0733-9364

Withrow, Josh (2024) Impact of augmented documentation workflows on transportation agency asphalt paving operations: A qualitative and quantitative study. PhD thesis, University of Kentucky, USA.

Wong, F K W; Chan, A P C; Yam, M C H; Wong, E Y S; Tse, K T C; Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(2), pp. 130-142. ISSN 1726-0531

Wong, L; Wang, Y; Law, T and Lo, C T (2016) Association of root causes in fatal fall-from-height construction accidents in Hong Kong. Journal of Construction Engineering and Management, 142(7): 4016018, ISSN 0733-9364

Wu, Z.; Park, A.; Awada, M. and Assaad, R. H. (2026) School building conditions and chronic absenteeism within socioeconomic contexts: A component-level statistical analysis in New York state. Engineering, Construction and Architectural Management, 33(15), pp. 432-457. ISSN 0969-9988

Wu, L; Mohamed, E; Jafari, P and Abourizk, S (2023) Machine learning-based Bayesian framework for interval estimate of unsafe-event prediction in construction. Journal of Construction Engineering and Management, 149(11): 04023118, ISSN 0733-9364

Wu, Shaoze (2024) Enhancing construction workforce safety through formulating an augmented reality digital twin system. PhD thesis, RMIT University, Australia.

Xiang, Y; Bu, J; Zhu, K; Ma, K; Opoku, A; Florez-Perez, L; Zhang, H and Wu, Y (2023) Reconsidering adaptive industrialized construction in Chinese rural areas: Responding to the challenge of COVID-19. Building Research & Information, 51(3), pp. 316-332. ISSN 0961-3218

Xie, L.; Yu, Z. and Zhao, X. (2025) Assessing construction safety risks in large urban complex projects: An interval ordinal priority approach. Engineering, Construction and Architectural Management, 33(5), pp. 3996-4018. ISSN 0969-9988

Xu, D; Agyekum, K; Manu, P; Cheung, C; Che Ibrahim, C K I; Mahamadu, A M and Perez, P A (2026) Design for safety (dfs) implementation in the construction industry: A study of design professionals in Northern China. Journal of Engineering, Design and Technology, 24(1), pp. 1-23. ISSN 1726-0531

Xu, Q; Hwang, B G; Choo, R Q; Zheng, X; Kong, L; Wang, Q C and Liu, X (2023) Comparison of construction project risks before and during COVID-19 in Singapore: Criticality and management strategies. Construction Management and Economics, 41(10), pp. 875-891. ISSN 01446193

Xue, H; Li Teh, K K and Ling, F Y Y (2025) Effects of crisis management leadership, perceived self-efficacy, and job performance on facility management professionals' job satisfaction in a crisis. Journal of Construction Engineering and Management, 151(7): 04025084, ISSN 0733-9364

Yan, X and Kim, Y C (2018) A conceptual framework of ITSMCA for a building collapse accident. Engineering, Construction and Architectural Management, 25(6), pp. 721-737. ISSN 0969-9988

Yan, X and Li, T (2023) Construction and application of urban digital infrastructure: practice of "urban brain" in facing COVID-19 in hangzhou, China. Engineering, Construction and Architectural Management, 30(8), pp. 3123-3141. ISSN 0969-9988

Yang, C (2023) Reliability-based methodology for design and evaluation of concrete bridge decks. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Yang, J B and Chen, Y F (2025) S-curve adjustment approaches for a force majeure event: COVID-19 as an example. Engineering, Construction and Architectural Management, 32(3), pp. 1621-1642. ISSN 0969-9988

Yang, L; Lou, J; Zhou, J; Zhao, X and Jiang, Z (2023) Complex network-based research on organization collaboration and cooperation governance responding to COVID-19. Engineering, Construction and Architectural Management, 30(8), pp. 3749-3779. ISSN 0969-9988

Yang, X; Jefferson, W and Bulbul, T (2025) Evaluation of construction worker perceptions of wearable proximity sensors during the COVID-19 pandemic. Journal of Construction Engineering and Management, 151(3): 04024217, ISSN 0733-9364

Yang, Y; Li, Y; Kral, K; Hupert, N and Dogan, T (2021) Urban design attributes and resilience: COVID-19 evidence from New York city. Buildings & Cities, 2(1), pp. 618-636. ISSN 2632-6655

Ying, W; Dai, X and Shen, W (2025) Rapid project delivery through bricolage and planning: A case study of the huoshenshan hospital project. Journal of Construction Engineering and Management, 151(8): 05025003, ISSN 0733-9364

Young-Corbett, D E (2014) Prevention through design: Health hazards in asphalt roofing. Journal of Construction Engineering and Management, 140(9): 06014007, ISSN 0733-9364

Yu, B (2007) Essays on structural analysis of procurement auctions. PhD thesis, Ohio State University, USA.

Yu, X; Mehmood, K; Paulsen, N; Ma, Z and Kwan, H K (2021) Why safety knowledge cannot be transferred directly to expected safety outcomes in construction workers: The moderating effect of physiological perceived control and mediating effect of safety behavior. Journal of Construction Engineering and Management, 147(1): 1965, ISSN 0733-9364

Yu, Y (2021) Road network maintenance and repair considering day-to-day traffic dynamics and transient congestion. PhD thesis, Imperial College London, UK.

Yuan, M; Li, Z; Li, X; Luo, X; Yin, X and Cai, J (2023) Proposing a multifaceted model for adopting prefabricated construction technology in the construction industry. Engineering, Construction and Architectural Management, 30(2), pp. 755-786. ISSN 0969-9988

Yung, P. and Blacker, S. (2026) Macroeconomic determinants of individual construction trader bankruptcy in the UK. Construction Management and Economics, 44(9), pp. 653-673. ISSN 0144-6193

Zadeh Kazemi, M (2022) Essays on sustainability reporting quality, sustainability-oriented innovation, disruptive technologies and resilience in the construction sector: The case of the UAE. PhD thesis, Brunel University, UK.

Zainal Abidin, N A (2018) Resilience of Malaysian public sector construction industry to supply chain disruptions. PhD thesis, University of Huddersfield, UK.

Zamani, S H; Rahman, R A; Fauzi, M A and Mohamed Yusof, L (2024) Government pandemic response strategies for AEC enterprises: Lessons from COVID-19. Journal of Engineering, Design and Technology, 22(3), pp. 690-717. ISSN 1726-0531

Zeinali Kalkhoran, A; Platt, L S; Iovine, N; Brown, S and Pollitt, B (2025) An agent-based modeling approach for infection prevention predesign: simulating the spread of pathogens between humans and the environment in an Intensive Care Unit. Architectural Engineering and Design Management, 21(4), pp. 746-767. ISSN 1745-2007

Zhairy, A. E.; Daoud, A. O. and Mohamed, A. G. (2026) Transforming facility management with BIM, IoT, and digital twin: A data-driven approach to air quality monitoring. Architectural Engineering and Design Management, 22(2), pp. 426-445. ISSN 1745-2007

Zhang, S.; Duan, J. and Sunindijo, R. Y. (2026) Mental health outcomes and psychosocial hazards experienced by construction professionals with different demographic characteristics during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 33(4), pp. 3424-3451. ISSN 0969-9988

Zhang, J; Eastham, D L and Bernold, L E (2005) Waste-based management in residential construction. Journal of Construction Engineering and Management, 131(4), pp. 423-430. ISSN 0733-9364

Zhang, M; Cao, T and Zhao, X (2019) Using smartphones to detect and identify construction workers' near-miss falls based on ann. Journal of Construction Engineering and Management, 145(1): 04018120, ISSN 0733-9364

Zhang, M and Fang, D (2013) A cognitive analysis of why Chinese scaffolders do not use safety harnesses in construction. Construction Management and Economics, 31(3), pp. 207-222. ISSN 1466433X

Zhang, M; Xue, X; Luo, T; Li, M and Tang, X (2024) The supportability evaluation of cross-regional major infrastructure projects based on the combination weighting of the game theory-cloud model. Engineering, Construction and Architectural Management, 31(9), pp. 3679-3705. ISSN 0969-9988

Zhang, P; Sing, M C P; Guo, S; Chan, I Y S and Fung, I W H (2025) Causal factors of near misses and accidents in urban railway construction: A complex network approach. Journal of Construction Engineering and Management, 151(7): 04025081, ISSN 0733-9364

Zhang, R; Chen, L and Sun, X (2024) The impact of COVID-19 on the financial performance of the UK construction firms. Construction Management and Economics, 42(10), pp. 867-885. ISSN 01446193

Zhang, R P; Cheung, C M and Lei, H (2019) Applications of visualisation technology in construction safety training: A preliminary review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Zhang, R P and McDermott, V (2017) Corporate governance, incentive schemes, and safety performance in the construction industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Zhang, X; Li, Y and Wu, D (2020) Developing an underground utility occupation index for efficient urban utilities planning. Journal of Construction Engineering and Management, 146(5): 04020036, ISSN 0733-9364

Zhang, X; Liu, T; Rahman, A and Zhou, L (2023) Blockchain applications for construction contract management: A systematic literature review. Journal of Construction Engineering and Management, 149(1): 03122011, ISSN 0733-9364

Zhang, Y; Zhang, M; Gao, F and Li, J (2025) Inverse problem method application in building physics numerical optimization: New insight into ideal envelope properties determination. Architectural Engineering and Design Management, 21(2), pp. 252-267. ISSN 1745-2007

Zhao, D (2015) Exploring construction safety and control measures through electrical fatalities. PhD thesis, Virginia Tech, USA.

Zhao, J; Thurairajah, N; Greenwood, D; Liu, H and Yuan, J (2023) Unpacking the context of value for money assessment in global markets: A procurement option framework for public-private partnerships. Engineering, Construction and Architectural Management, 30(8), pp. 3583-3601. ISSN 0969-9988

Zhou, H.; Xu, M. and Yang, Q. (2026) Quantitative safety risk coupling assessment method based on complex network theory: A case study in super-high-rise building construction. Journal of Construction Engineering and Management, 152(7): 04026095, ISSN 0733-9364

Zhou, C; Li, R; Xiong, X; Li, J and Gao, Y (2023) Optimization of triage time and sample delivery path in health infrastructure to combat COVID-19. Engineering, Construction and Architectural Management, 30(8), pp. 3620-3644. ISSN 0969-9988

Zhou, Y; Wang, Y; Li, C; Ding, L and Wang, C (2024) Automatic generative design and optimization of hospital building layouts in consideration of public health emergency. Engineering, Construction and Architectural Management, 31(4), pp. 1391-1407. ISSN 0969-9988

Zhou, Z; Li, Q and Wu, W (2012) Developing a versatile subway construction incident database for safety management. Journal of Construction Engineering and Management, 138(10), pp. 1169-1180. ISSN 0733-9364

Zhu, H; Hwang, B G; Ngo, J and Tan, J P S (2022) Applications of smart technologies in construction project management. Journal of Construction Engineering and Management, 148(4): 04022010, ISSN 0733-9364

Zhu, K; Xiang, Y; Bu, J and Zhang, H (2021) The design and construction of public service building in developing rural regions during the post COVID-19 period: Cased on a Chinese village centre. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Zhu, L; Zhu, Q and Zhao, X (2024) Identifying determinants of student learning effects in intensive online environments: An empirical investigation in civil engineering education. International Journal of Construction Management, 24(11), pp. 1249-1258. ISSN 1562-3599

Zhuang, J; Wang, Y; Yan, Z and Liu, J (2026) Evolutionary game analysis on the cooperative mechanism of government subsidies and market-based risk mitigation institutions in managing ecosustainable projects' default risks. Journal of Construction Engineering and Management, 152(3): 04025270, ISSN 0733-9364

Zou, P X W and Zhang, G (2009) Comparative study on the perception of construction safety risks in China and Australia. Journal of Construction Engineering and Management, 135(7), pp. 620-627. ISSN 0733-9364

Zuluaga, C M; Albert, A and Arroyo, P (2018) Protecting bridge maintenance workers from falls: Evaluation and selection of compatible fall protection supplementary devices. Journal of Construction Engineering and Management, 144(8): 04018073, ISSN 0733-9364

Zuluaga, C M; Albert, A and Winkel, M A (2020) Improving safety, efficiency, and productivity: Evaluation of fall protection systems for bridge work using wearable technology and utility analysis. Journal of Construction Engineering and Management, 146(2): 04019107, ISSN 0733-9364

Zuluaga Santa, C M (2018) Protecting bridge maintenance workers: Evaluating fall protection supplementary devices using virtual prototyping and wearable technology. PhD thesis, North Carolina State University, USA.

Zuofa, T; Ochieng, E G and Ode-Ichakpa, I (2023) An evaluation of determinants influencing the adoption of circular economy principles in Nigerian construction SMEs. Building Research & Information, 51(1), pp. 69-84. ISSN 0961-3218

af Hällström, A and Bosch-Sijtsema, P (2021) Creating collaboration: The use of collaborative space in large-scale infrastructure development. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

de Silva, C (2012) Health and safety: Teaching law, educating for prevention. International Journal of Law in the Built Environment, 4(3), pp. 233-246. ISSN 17561469

van Marken Lichtenbelt, W; Hanssen, M; Pallubinsky, H; Kingma, B and Schellen, L (2017) Healthy excursions outside the thermal comfort zone. Building Research & Information, 45(7), pp. 819-827. ISSN 0961-3218