Items with Subject: environmental issues

Ababio, B K and Lu, W (2023) Barriers and enablers of circular economy in construction: A multi-system perspective towards the development of a practical framework. Construction Management and Economics, 41(1), pp. 3-21. ISSN 01446193

Abbasi, M H (2024) Phasing out fossil fuel heating in UK homes: A multi-dimensional framework for sustainability assessment of alternatives and their lifecycle implications. PhD thesis, Liverpool John Moores University, UK.

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO₂ emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdullah, A-N M (2019) Assessing economic, social, political and environmental issues related to mega-projects : A case study of Merowe Dam in Sudan. PhD thesis, University of Plymouth, UK.

Abdullah, M R and Egbu, C (2010) Selection criteria framework for choosing industrialized building systems for housing projects. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Abraham, D M and Dickinson, R J (1998) Disposal costs for environmentally regulated facilities: LCC approach. Journal of Construction Engineering and Management, 124(2), pp. 146-154. ISSN 0733-9364

Addy, M; Adinyira, E; Danku, J C and Dadzoe, F (2021) Impediments to the development of the green building market in Sub-Saharan Africa: The case of Ghana. Smart and Sustainable Built Environment, 10(2), pp. 193-207. ISSN 2046-6099

Adjei, S D (2016) Review of waste management in the UK construction industry. PhD thesis, University of Wolverhampton, UK.

Afkhamiaghda, M and Elwakil, E (2023) Challenges review of decision making in post-disaster construction. International Journal of Construction Management, 23(14), pp. 2409-2418. ISSN 1562-3599

Aghimien, D; Aigbavboa, C; Oke, A and Aghimien, L (2022) Latent institutional environment factors influencing construction digitalization in South Africa. International Journal of Construction Education and Research, 18(2), pp. 142-158. ISSN 1557-8771

Ahmed, V; Saboor, S; Almarzooqi, F A; Alshamsi, H A; Alketbi, M A and Al Marei, F A (2021) A comparative study of energy performance in educational buildings in the UAE. Construction Economics and Building, 21(3), pp. 33-57. ISSN 2204-9029

Ahmed, W; Najmi, A; Arif, M and Younus, M (2019) Exploring firm performance by institutional pressures driven green supply chain management practices. Smart and Sustainable Built Environment, 8(5), pp. 415-437. ISSN 2046-6099

Akadiri, O P (2011) Development of a multi-criteria approach for the selection of sustainable materials for building projects. PhD thesis, University of Wolverhampton, UK.

Akbar, M R (2012) Evaluating sustainability in high-rise developments. PhD thesis, Ulster University, UK.

Aksoy Tırmıkçı, C and Yavuz, C (2019) Environmental life cycle analysis of a fixed PV energy system and a two-axis sun tracking PV energy system in a low-energy house in Turkey. Smart and Sustainable Built Environment, 8(5), pp. 391-399. ISSN 2046-6099

Akujuru, V A and Ruddock, L (2015) Dichotomising compulsory land acquisition and land contamination valuations. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 268-288. ISSN 1759-5916

Al-Atesh, E A; Rahmawati, Y; Zawawi, N A W A and Utomo, C (2023) A decision-making model for supporting selection of green building materials. International Journal of Construction Management, 23(5), pp. 922-933. ISSN 1562-3599

Alaqad, M; Gidado, K and Piroozfar, P (2015) Integrating value, risk and environmental management at the strategic definition stage. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Allan, C; Sommerville, J; Kennedy, P and Robertson, H (2000) A business unit approach to construction process re-engineering. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Alzeraa, A (2018) Impact of project communications effectiveness on construction disputes. PhD thesis, Wayne State University, USA.

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

Arif, F and Tahir, S (2025) Housing sector risk assessment using structural equation modeling for small-to-medium sized construction companies and builders in urban areas. International Journal of Construction Management, 25(9), pp. 1058-1071. ISSN 1562-3599

Asa, E; Shrestha, M; Baffoe-Twum, E and Awuku, B (2020) Development of sustainable construction material from fly ash Class C. Journal of Engineering, Design and Technology, 18(6), pp. 1615-1640. ISSN 1726-0531

Asadi, S; Sharghi, A; Mottaki, Z and Salehsedghpour, B (2025) Housing reconstruction after traumatic events: A POE study of Bam housing after the 2003 earthquake, Iran. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 57-71. ISSN 1759-5908

Atin, A (2016) Project risk propagation modeling of engineering, procurement and construction. PhD thesis, Wayne State University, USA.

Attallah, S O (2014) A life cycle analysis approach for the enhancement of sustainability decision-making in the construction industry using agent-based modeling. PhD thesis, Purdue University, USA.

Avetisyan, H G; Miller-Hooks, E and Melanta, S (2012) Decision models to support greenhouse gas emissions reduction from transportation construction projects. Journal of Construction Engineering and Management, 138(5), pp. 631-641. ISSN 0733-9364

Awale, Raman (2016) An exploratory study of a 'creating shared value' (CSV) concept for achieving firm competitiveness in Hong Kong construction firms. PhD thesis, University of Hong Kong, Hong Kong.

Ayo-Odifiri, S O (2025) A systematic review of the applicability of nature-based solutions for resilient urban residences in southern Nigeria. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 344-362. ISSN 1759-5908

Azhar, S and Brown, J (2009) Bim for sustainability analyses. International Journal of Construction Education and Research, 5(4), pp. 276-292. ISSN 1557-8771

Bahrami, S (2021) Product information quality: A sustainability challenge in design and construction. PhD thesis, Lund University, Sweden.

Bahrami, S and Zeinali, D (2023) The sustainability challenge of product information quality in the design and construction of facades: Lessons from the grenfell tower fire. Smart and Sustainable Built Environment, 12(3), pp. 488-506. ISSN 2046-6099

Bajjou, M S and Chafi, A (2026) Enhancing environmental sustainability through lean construction principles: An industry-based SEM analysis. Engineering, Construction and Architectural Management, 33(1), pp. 171-206. ISSN 0969-9988

Balasubramanian, S (2017) Green supply chain management: an investigation on the construction sector. PhD thesis, Middlesex University, UK.

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Bohne, R A (2005) Eco-efficiency and performance strategies in construction and demolition waste recycling systems. PhD thesis, Norges Teknisk-Naturvitenskapelige Universitet, Norway.

Brocklesby, M (1999) The environmental impact of frame materials: an assessment of the embodied impacts for building frames in the UK construction industry. PhD thesis, University of Sheffield, UK.

Brown, L A (2016) The contaminated land regime and austerity. International Journal of Law in the Built Environment, 8(3), pp. 210-225. ISSN 1756-1450

Bröchner, J; Rosander, S and Waara, F (2004) Cross-border post-acquisition knowledge transfer among construction consultants. Construction Management and Economics, 22(4), pp. 421-427. ISSN 01446193

Busic-Sontic, A (2019) Energy efficiency investments in residential buildings: does personality matter? PhD thesis, University of Cambridge, UK.

Cha, H S; Kim, J and Han, J Y (2009) Identifying and assessing influence factors on improving waste management performance for building construction projects. Journal of Construction Engineering and Management, 135(7), pp. 647-656. ISSN 0733-9364

Cha, H S; Kim, K H and Kim, C K (2012) Case study on selective demolition method for refurbishing deteriorated residential apartments. Journal of Construction Engineering and Management, 138(2), pp. 294-303. ISSN 0733-9364

Chamikara, P B S; Perera, B A K S and Rodrigo, M N N (2020) Competencies of the quantity surveyor in performing for sustainable construction. International Journal of Construction Management, 20(3), pp. 237-251. ISSN 1562-3599

Charlson, J (2021) Emerging trends in construction law at the confluence of academia and industry. PhD thesis, University of Wolverhampton, UK.

Chen, X; Chang-Richards, A Y; Yiu, T W; Ling, F Y Y; Pelosi, A and Yang, N (2024) A multivariate regression analysis of barriers to digital technologies adoption in the construction industry. Engineering, Construction and Architectural Management, 31(11), pp. 4281-4307. ISSN 0969-9988

Chen, Z; Abdullah, A B; Anumba, C J and Li, H (2014) Anp experiment for demolition plan evaluation. Journal of Construction Engineering and Management, 140(2): 06013005, ISSN 0733-9364

Chen, Z; Li, H and Wong, C T C (2005) Environalplanning: Analytic network process model for environmentally conscious construction planning. Journal of Construction Engineering and Management, 131(1), pp. 92-101. ISSN 0733-9364

Cole, R J (2000) Building environmental assessment methods: Assessing construction practices. Construction Management and Economics, 18(8), pp. 949-957. ISSN 01446193

Cole, R J (2004) Changing context for environmental knowledge. Building Research & Information, 32(2), pp. 91-109. ISSN 0961-3218

Cole, R J (2005) Building environmental assessment methods: Redefining intentions and roles. Building Research & Information, 33(5), pp. 455-467. ISSN 0961-3218

Cruz Ortiz, M R P (2019) Expanding modular design: All-rise mass timber residences in Hawaii. DArch thesis, University of Hawai'i at Manoa, USA.

Dair, C M (2000) An evaluation of the UK regulatory system for the redevelopment of contaminated land. PhD thesis, University of Sussex, UK.

Dalla Valle, Anna (2019) Environment-driven change management in AEC firms: Life cycle perspective in practice. PhD thesis, Politecnico di Milano, Italy.

Dammann, S and Elle, M (2006) Environmental indicators: Establishing a common language for green building. Building Research & Information, 34(4), pp. 387-404. ISSN 0961-3218

Dash, A (2021) Determinants of evs adoption: A study on green behavior of consumers. Smart and Sustainable Built Environment, 10(1), pp. 125-137. ISSN 2046-6099

De Neyra, P L A and Celoza, A (2026) Identifying influential factors in end-of-life decision-making for buildings using the Delphi method. Journal of Construction Engineering and Management, 152(4): 04026015, ISSN 0733-9364

Deng, Y and Poon, S W (2013) Meeting sustainability challenges of mega-event flagships. Engineering, Construction and Architectural Management, 20(1), pp. 46-62. ISSN 0969-9988

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Ding, G and Forsythe, P J (2013) Sustainable construction: Life cycle energy analysis of construction on sloping sites for residential buildings. Construction Management and Economics, 31(3), pp. 254-265. ISSN 1466433X

Ding, Grace K C (2004) The development of a multi-criteria approach for the measurement of sustainable performance for built projects and facilities. PhD thesis, University of Technology Sydney, Australia.

Domingo, N; Osmani, M and Price, A D F (2008) Reducing construction waste in healthcare facilities: A project lifecycle approach. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Domingo, N; Osmani, M and Price, A D F (2009) Construction waste minimisation in the UK healthcare industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Duffield, Colin F (2001) An evaluation framework for privately funded infrastructure projects in Australia. PhD thesis, University of Melbourne, Australia.

Díaz-Jimenez, D; Ruiz, J L; González-Lama, J and Verdejo-Espinosa, Á (2025) Assessing the sustainable alignment of a sensor-based connected health system with SDGs: An evaluation model and case study. Smart and Sustainable Built Environment, 14(7), pp. 2235-2259. ISSN 2046-6099

Edwards, D J; Harris, P T and Holt, G D (1996) The greenhouse effect: impact upon and the role to be played by construction. Building Research & Information, 24(2), pp. 97-103. ISSN 0961-3218

Eksteen, B and Bate, G (2002) The effects of construction on the environment: A case study. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Enshassi, A (1997) Construction projects and the environment in Palestine. Building Research & Information, 25(2), pp. 111-114. ISSN 0961-3218

Eom, C S J and Paek, J H (2009) Risk index model for minimizing environmental disputes in construction. Journal of Construction Engineering and Management, 135(1), pp. 34-41. ISSN 0733-9364

Fawcett, T and Killip, G (2014) Anatomy of low carbon retrofits: Evidence from owner-occupied superhomes. Building Research & Information, 42(4), pp. 434-445. ISSN 0961-3218

Fergusson, H and Langford, D A (2006) Strategies for managing environmental issues in construction organizations. Engineering, Construction and Architectural Management, 13(2), pp. 171-185. ISSN 0969-9988

Fergusson, Hugh (2005) The strategic management of environmental issues in construction. PhD thesis, University of Strathclyde, UK.

Fernández-Pacheco Sáez, J L; Rasskin-Gutman, I; Martín-Bermúdez, N and Pérez-del-Campo, A (2026) Living knowledge labs: Creating community and inclusive nature-based solutions. Buildings & Cities, 7(1), pp. 58-74. ISSN 2632-6655

Finch, E (1992) Environmental assessment of construction projects. Construction Management and Economics, 10(1), pp. 5-18. ISSN 01446193

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 1). International Journal of Law in the Built Environment, 6(1-2), pp. 43-68. ISSN 1756-1450

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 2). International Journal of Law in the Built Environment, 6(1-2), pp. 129-151. ISSN 1756-1450

Fore, S and Mbohwa, C (2015) Greening manufacturing practices in a continuous process industry: Case study of a cement manufacturing company. Journal of Engineering, Design and Technology, 13(1), pp. 94-122.

Gade, A N; Jensen, C; Sandelin, S; Lilja, K and Joosten, F (2022) Sustainable Development Goals in construction engineering education: Comparison of current curricula in Denmark, Finland, and Belgium. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Gade, R (2022) Achieving sustainable construction through construction & demolition waste minimisation in residential building projects. PhD thesis, Auckland University of Technology, New Zealand.

Ganapathy, G P and Haupt, T C (2024) Engineering properties of SBS and crumb-rubber modified bitumen: a design of experiment approach. Journal of Engineering, Design and Technology, 22(6), pp. 1742-1754. ISSN 1726-0531

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Gharehbaghi, K; McManus, K; Georgy, M; Farnes, K; Pagliara, F and Myers, M (2024) Verifying the sustainability factors of mega transportation infrastructure: Sydney metro's commissioning through the "significance matrix" methodology. Journal of Engineering, Design and Technology, 22(1), pp. 22-41. ISSN 1726-0531

Ghosh, A (2015) Analyzing the impact of building information modeling (BIM) on labor productivity in retrofit construction: Case study at a semiconductor manufacturing facility. PhD thesis, Arizona State University, USA.

Ghumra, S (2012) Developing a sustainability assessment framework for ready-mixed concrete. EngD thesis, Loughborough University, UK.

Glick, S; Shuler, S and Guggemos, A A (2013) Life cycle analysis for sustainable development: A case study of parking lot pavements. International Journal of Construction Education and Research, 9(3), pp. 226-236. ISSN 1557-8771

Gluch, P (2005) Building green: perspectives on environmental mangagement in construction. PhD thesis, Chalmers University of Technology, Sweden.

Gluch, P and Räisänen, C (2012) What tensions obstruct an alignment between project and environmental management practices? Engineering, Construction and Architectural Management, 19(2), pp. 127-140. ISSN 0969-9988

Goh, C S (2014) Development of a capability maturity model for sustainable construction. PhD thesis, University of Hong Kong, Hong Kong.

Griffith, A (1995) The current status of environmental management systems in construction. Engineering, Construction and Architectural Management, 2(1), pp. 3-16. ISSN 0969-9988

Griffith, A (2000) Integrated management systems: A single management system solution for project control? Engineering, Construction and Architectural Management, 7(3), pp. 232-240. ISSN 0969-9988

Gultekin, P (2015) An integrated process model and decision support system for energy efficient retrofits. PhD thesis, Pennsylvania State University, USA.

Guo, H B (2022) From corporate social responsibility to creating shared value: Competitive strategies for Chinese international construction companies on the "one belt one road". PhD thesis, University of Hong Kong, Hong Kong.

Habisreutinger, P and Gunderson, D E (2006) Real estate reuse opportunities within the regenesis project area: A case study. International Journal of Construction Education and Research, 2(1), pp. 53-63. ISSN 1557-8771

Hamilton, E M (2018) Positive sustainable built environments: The cognitive and behavioral affordances of environmentally responsible behavior in green residence halls. PhD thesis, University of Michigan, USA.

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

He, S (2018) A project-level infrastructure management framework for sustainable roadways. PhD thesis, Syracuse University, USA.

Hijazi, S A (2016) Developing a framework to enhance building handover practices in public sector construction projects in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Honda, Wilson Saburo (2016) Sustainability certificate of corporate offices buildings in Brazil. PhD thesis, Universidade de São Paulo, Brazil.

Horvath, A (1997) Estimation of environmental implications of construction materials and designs using life cycle assessment techniques. PhD thesis, Carnegie Mellon University, USA.

Huang, H (2003) The effects of building regulations control on the design of private residential buildings. PhD thesis, University of Hong Kong, Hong Kong.

Ibrahim, I.; Haj-Salem, N.; Ashour, A. G. and Alotaibi, E. B. (2026) Assessment of consumer behaviour towards recycled plastic products: Insights from the UAE. Construction Economics and Building, 26(2), ISSN 2204-9029

Ibrahim, K; Simpeh, F and Adebowale, O J (2025) Benefits and challenges of wearable safety devices in the construction sector. Smart and Sustainable Built Environment, 14(1), pp. 50-71. ISSN 2046-6099

Ibrahim, M H I (2011) Corporate environmental disclosure: a case from the Libyan construction industry. PhD thesis, Liverpool John Moores University, UK.

Isiadinso, C; Anumba, C J; El-Rimawi, J and Bhamra, T (2006) Design for deconstruction lessons from the manufacturing industry. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Islam, M H; Safayet, M A and Al Mamun, A (2024) Building performance analysis for optimizing the energy consumption of an educational building. International Journal of Building Pathology and Adaptation, 42(4), pp. 576-595. ISSN 23984708

Ismail, Z A (2020) Planning the maintenance of green building materials for sustainable development: A building information modelling approach. Journal of Financial Management of Property and Construction, 26(1), pp. 141-157. ISSN 1366-4387

Jayakrishna, K; Girubha, R J and Vinodh, S (2016) Comparison of sustainability characteristics of conventional and CNC turning processes: A case study. Journal of Engineering, Design and Technology, 14(3), pp. 422-445.

Jayalath, C. D. and Kulatunga, U. (2026) Bridging human behaviour and public transport policies: Applying the extended theory of planned behaviour for sustainable urban mobility. Smart and Sustainable Built Environment, pp. 1-21. ISSN 2046-6099

Jegard, L; Castaño-Rosa, R; Kilpeläinen, S and Pelsmakers, S (2024) Finnish glazed balconies: Residents’ experience, wellbeing and use. Buildings & Cities, 5(1), pp. 540-561. ISSN 2632-6655

Judson, E P and Maller, C (2014) Housing renovations and energy efficiency: Insights from homeowners practices. Building Research & Information, 42(4), pp. 501-511. ISSN 0961-3218

Junnila, S (2004) The environmental impact of an office building throughout its life cycle. PhD thesis, Helsinki University of Technology, Finland.

Kaiser, M J; Pulsipher, A G and Martin, J (2005) Cost of site clearance and verification operations in the gulf of Mexico. Journal of Construction Engineering and Management, 131(1), pp. 117-126. ISSN 0733-9364

Kavuri, A S; Soetanto, R; Goodier, C; Murguia, D and Szczygiel, M (2020) Scenarios for the digitalisation of the construction industry. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Kein, A T T; Ofori, G and Briffett, C (1999) ISO 14000: Its relevance to the construction industry of Singapore and its potential as the next industry milestone. Construction Management and Economics, 17(4), pp. 449-461. ISSN 01446193

Keskin, F S (2021) Integration of lifecycle assessment into structural intervention scenarios for assessing environmental impacts of vulnerable buildings. PhD thesis, University of Birmingham, UK.

Kestle, L; Potangaroa, R and Storey, B (2011) Integration of lean design and design management and its influence on the development of a multidisciplinary design management model for remote site projects. Architectural Engineering and Design Management, 7(2), pp. 139-153. ISSN 1745-2007

Klocko, Barbara A (2009) Superintendents as sensemakers in the design of sustainable schools. PhD thesis, Oakland University, USA.

Koehn, E and Datta, N K (2003) Quality, environmental, and health and safety management systems for construction engineering. Journal of Construction Engineering and Management, 129(5), pp. 562-569. ISSN 0733-9364

Kumar, V; Hundal, B S and Kaur, K (2019) Factors affecting consumer buying behaviour of solar water pumping system. Smart and Sustainable Built Environment, 8(4), pp. 351-364. ISSN 2046-6099

Kumar, V; Kaushik, A K and Singh, G (2022) Modeling the Indian households' intention to adopt the solar net metering system. Built Environment Project and Asset Management, 12(6), pp. 956-972. ISSN 2044-124X

Kumari, T; Kulathunga, U; Hewavitharana, T and Madusanka, N (2022) Embodied carbon reduction strategies for high-rise buildings in Sri Lanka. International Journal of Construction Management, 22(13), pp. 2605-2613. ISSN 1562-3599

Kwawu, W and Elmualim, A (2011) Sustainability in facilities management: A review of drivers and policy issues. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Kwon, N; Song, K; Lee, H S; Kim, J and Park, M (2018) Construction noise risk assessment model focusing on construction equipment. Journal of Construction Engineering and Management, 144(6): 04018034, ISSN 0733-9364

Laitos, J G and Abel, T M (2013) Sites suitable for mixed use development in Britain and America. International Journal of Law in the Built Environment, 5(2), pp. 137-155. ISSN 17561469

Lau, J L and Hashim, A H (2020) Mediation analysis of the relationship between environmental concern and intention to adopt green concepts. Smart and Sustainable Built Environment, 9(4), pp. 539-556. ISSN 2046-6099

Lau, J L; Hashim, A H; Samah, A A and Salim, A S S (2016) Understanding the environmental worldviews of Malaysian project managers. Smart and Sustainable Built Environment, 5(4), pp. 307-324. ISSN 2046-6099

Lau, K K L; Ng, E; Ren, C; Ho, J C K; Wan, L; Shi, Y; Zheng, Y; Gong, F; Cheng, V; Yuan, C; Tan, Z and Wong, K S (2018) Defining the environmental performance of neighbourhoods in high-density cities. Building Research & Information, 46(5), pp. 540-551. ISSN 0961-3218

Lees, E (2016) The polluter pays principle and the remediation of the land. International Journal of Law in the Built Environment, 8(1), pp. 2-20. ISSN 1756-1450

Levitt, R E (2007) CEM research for the next 50 years: Maximizing economic, environmental, and societal value of the built environment. Journal of Construction Engineering and Management, 133(9), pp. 619-628. ISSN 0733-9364

Li, J; Zuo, J; Jiang, W; Zhong, X; Li, J and Pan, Y (2020) Policy instrument choice for construction and demolition waste management: The case study of Shenzhen, China. Engineering, Construction and Architectural Management, 27(6), pp. 1283-1297. ISSN 0969-9988

Lim, Y S; Xia, B; Skitmore, M; Gray, J and Bridge, A (2015) Education for sustainability in construction management curricula. International Journal of Construction Management, 15(4), pp. 321-331. ISSN 1562-3599

Lima, Rosimeire Midori Suzuki Rosa (2012) Evaluation system of integrated construction and demolition waste management at the municipal level. PhD thesis, Universidade de São Paulo, Brazil.

Lingard, H; Graham, P and Smithers, G (2000) Employee perceptions of the solid waste management system operating in a large Australian contracting organization: Implications for company policy implementation. Construction Management and Economics, 18(4), pp. 383-393. ISSN 01446193

Liu, M; Luo, X and Lu, W Z (2025) Impact of mandatory reporting around the world on environmental disclosure strategies in the architecture, engineering, and construction industry: A linguistic perspective. Journal of Construction Engineering and Management, 151(10): 04025144, ISSN 0733-9364

Lopes, J (2002) Characteristics of the main institutional actors in the Portuguese construction industry. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Lorenz, K and Marosszeky, M (2004) Intercultural management for international construction projects: A comparison of Austria and Germany with Australia. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Lv, X and El-Gohary, N M (2016) Discovering context-specific integration practices for integrating NEPA into statewide and metropolitan project planning processes. Journal of Construction Engineering and Management, 142(11): 04016056, ISSN 0733-9364

Mah, D E (2011) Framework for rating the sustainability of the residential construction practice. PhD thesis, University of Alberta, Canada.

Marques, Vania de Lourdes (2015) A model for stakeholder management in construction companies. PhD thesis, Universidade Federal Fluminense, Brazil.

Marsh, R (2016) LCA profiles for building components: Strategies for the early design process. Building Research & Information, 44(4), pp. 358-375. ISSN 0961-3218

Marsh, R (2017) Building lifespan: Effect on the environmental impact of building components in a Danish perspective. Architectural Engineering and Design Management, 13(2), pp. 80-100. ISSN 1745-2007

Mezher, T (2011) Building future sustainable cities: The need for a new mindset. Construction Innovation, 11(2), pp. 136-141. ISSN 1471-4175

Mireku, E. K.; Kissi, E.; Ikuabe, M.; Arkoh-Clayman, E. and Musah, L. (2026) Encumbrances of integrating sustainability concepts and practices in rural community buildings: Empirical evidence from Ghana. International Journal of Building Pathology and Adaptation, 44(5), pp. 1232-1245. ISSN 2398-4708

Mohandes, S R; Kaddoura, K; Singh, A K; Elsayed, M Y; Banihashemi, S; Antwi-Afari, M F; Olawumi, T O and Zayed, T (2025) Application of a hybrid fuzzy-based algorithm to investigate the environmental impact of sewer overflow. Smart and Sustainable Built Environment, 14(6), pp. 1950-1990. ISSN 2046-6099

Moir S, C K (2013) An appreciation of BREEAM relative to the cosmonomic idea of reality. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Moore, T; Ridley, I; Strengers, Y; Maller, C and Horne, R (2017) Dwelling performance and adaptive summer comfort in low-income Australian households. Building Research & Information, 45(4), pp. 443-456. ISSN 0961-3218

Moore, W B (1989) Modeling the impact of large construction projects on surrounding communities. PhD thesis, University of Maryland, College Park, USA.

Morbitzer, C A (2003) Towards the integration of simulation into the building design process. PhD thesis, University of Strathclyde, UK.

Mulholland, C (2020) Social value management in megaprojects: A study of UK nuclear decommissioning and remediation. PhD thesis, University of Manchester, UK.

Mándoki, R (2022) The social sustainability of standardisation in the Hungarian residential building sector. PhD thesis, University of Cambridge, UK.

Neamat, S D; Haido, J H and Wardeh, G (2025) Investigating pozzolanic glass waste's role in reinforcing ultra-high-performance concrete beams for enhanced sustainability. International Journal of Building Pathology and Adaptation, 43(4), pp. 633-651. ISSN 2398-4708

Nikolić, D. and Ewart, I. (2026) Going beyond net zero: Digital twins for achieving socio-ecological sustainability in the built environment. Smart and Sustainable Built Environment, 15(5), pp. 2015-2037. ISSN 2046-6099

Ntshwene, K; Essah, E A and Dixon, T J (2014) Investigating the level of awareness of building assessment tools in the construction industry of Botswana. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Odubiyi, A O and Davidson, I E (2005) England and Wales electricity industry: experiences in deregulation. Journal of Engineering, Design and Technology, 3(1), pp. 24-29. ISSN 1726-0531

Ofori, G and Kien, H L (2004) Translating Singapore architects' environmental awareness into decision making. Building Research & Information, 32(1), pp. 27-37. ISSN 0961-3218

Okeyinka, O M (2016) The applicability of recycled waste paper as lightweight building materials. PhD thesis, University of Wolverhampton, UK.

Olawale, O; Oyedele, L; Owolabi, H; Gbadamosi, A Q and Kusimo, H (2022) Project reputation in construction: A process-based perspective of construction practitioners in the UK. International Journal of Construction Management, 22(12), pp. 2267-2278. ISSN 1562-3599

Opoku, A; Cruickshank, H and Ahmed, V (2015) Organizational leadership role in the delivery of sustainable construction projects in UK. Built Environment Project and Asset Management, 5(2), pp. 154-169. ISSN 2044-124X

Palsodkar, M; Yadav, G and Nagare, M R (2024) Integrating industry 4.0 and agile new product development practices to evaluate the penetration of sustainable development goals in manufacturing industries. Journal of Engineering, Design and Technology, 22(4), pp. 1351-1392. ISSN 1726-0531

Panwar, A and Jha, K N (2017) Trade-off between life cycle cost and greenhouse gas emission in construction projects. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Pasquire, C (1999) The implications of environmental issues on UK construction management. Engineering, Construction and Architectural Management, 6(3), pp. 276-286. ISSN 0969-9988

Pearce, A R; Smith, S A; Saxton, M and De Soto, A (2018) Sustainability boot camp: Bridging disciplines to create a sustainable future. International Journal of Construction Education and Research, 14(1), pp. 59-73. ISSN 1557-8771

Pheng, L S and Tan, J H K (2005) Integrating ISO 9001 quality management system and ISO 14001 environmental management system for contractors. Journal of Construction Engineering and Management, 131(11), pp. 1241-1244. ISSN 0733-9364

Plaut, J M; Dunbar, B; Wackerman, A and Hodgin, S (2012) Regenerative design: The lenses framework for buildings and communities. Building Research & Information, 40(1), pp. 112-122. ISSN 0961-3218

Pooley, A C (2016) Typologies of transformation: learning, environmental responsibility and the UK construction industry. PhD thesis, Cardiff University, UK.

Poon, C S; Yu, A T W and Jaillon, L (2004) Reducing building waste at construction sites in Hong Kong. Construction Management and Economics, 22(5), pp. 461-470. ISSN 01446193

Poon, C S; Yu, A T W; Wong, S W and Cheung, E (2004) Management of construction waste in public housing projects in Hong Kong. Construction Management and Economics, 22(7), pp. 675-689. ISSN 01446193

Praticò, F G (2017) Metrics for management of asphalt plant sustainability. Journal of Construction Engineering and Management, 143(4): 04016116, ISSN 0733-9364

Rachmawati, F; Mudjahidin, M and Dewi Widowati, E (2024) Work rate modeling of building construction projects using system dynamic to optimize project cost and time performance. International Journal of Construction Management, 24(2), pp. 213-225. ISSN 1562-3599

Rahmani Asl, M (2015) A building information model (BIM) based framework for performance optimization. PhD thesis, Texas A&M University, USA.

Ramani, P V and Akomah, B B (2025) The negative factors that influence the performance of Ghanaian construction projects. Construction Economics and Building, 25(2), pp. 112-142. ISSN 2204-9029

Razak, N A (2024) Development of safety leading and lagging indicators framework for contractor selection in construction projects. PhD thesis, University of Manchester, UK.

Recsei, Richard Anthony (1998) A generalised decision support system for contaminated site management. PhD thesis, University of New South Wales, Australia.

Reiter, Dana L (2018) Increasing the effectiveness of stakeholder engagement in the use of environmental decision support systems. PhD thesis, Queensland University of Technology, Australia.

Renukappa, S; Egbu, C; Suresh, S and Mushatat, S (2015) Drivers for managing sustainability-related knowledge. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(2), pp. 66-75. ISSN 17514304

Rickaby, M (2020) Defining the relationship between personal values and sustainability performance in a TMO setting. EngD thesis, Loughborough University, UK.

Rohman, M A (2022) Assessment of the government's role performance in public-private partnership (PPP) toll road projects in Indonesia. Journal of Financial Management of Property and Construction, 27(2), pp. 239-258. ISSN 1366-4387

Roussac, A C and Bright, S (2012) Improving environmental performance through innovative commercial leasing: An Australian case study. International Journal of Law in the Built Environment, 4(1), pp. 6-22. ISSN 1756-1450

Roy, N C and Roy, N G (2022) Sustainable hydroelectric power project planning under socio-economic and environmental concerns using index based approach. Built Environment Project and Asset Management, 12(3), pp. 401-432. ISSN 2044-124X

S. Hayles, C; Dean, M; A. Lappin, S and E. McCullough, J (2013) Climate change adaptation : A decision support framework to encourage environmentally responsible behaviour. Smart and Sustainable Built Environment, 2(2), pp. 192-214. ISSN 2046-6099

Safapour, E; Kermanshachi, S and Rouhanizadeh, B (2022) Key components of successful post–hurricane reconstruction of transportation infrastructures. Built Environment Project and Asset Management, 12(5), pp. 775-791. ISSN 2044-124X

Salamati, A A (2001) Urban housing design in Iran in response to socio-cultural and environmental conditions. PhD thesis, University of Strathclyde, UK.

Salehudin, Muhamad Syafiq Bin (2012) Developing sustainable resorts in developing countries: A proposed new generation rating framework for Malaysia. PhD thesis, University of New South Wales, Australia.

Saleki, S and Bahramani, S K (2019) Designing a low-carbon building via lcb method 3.0, case study: An educational building in Tehran. Journal of Construction in Developing Countries, 23(2), pp. 129-150. ISSN 1823-6499

Sanad, H M; Ammar, M A and Ibrahim, M E (2008) Optimal construction site layout considering safety and environmental aspects. Journal of Construction Engineering and Management, 134(7), pp. 536-544. ISSN 0733-9364

Selvam, G.; Kamalanandhini, M.; Velpandian, M.; Hariharan, R.; Mohanakrishna, S. and Thirumurugan, V. (2026) Integrated statutory waste management framework for the sustainable built environment. Engineering, Construction and Architectural Management, 33(5), pp. 4078-4097. ISSN 0969-9988

Senaratne, S; Kc, A and Rai, S (2024) Stakeholder management challenges and strategies for sustainability issues in megaprojects: Case studies from Australia. Built Environment Project and Asset Management, 14(3), pp. 414-431. ISSN 2044-124X

Seo, S; Aramaki, T; Hwang, Y and Hanaki, K (2004) Fuzzy decision-making tool for environmental sustainable buildings. Journal of Construction Engineering and Management, 130(3), pp. 415-423. ISSN 0733-9364

Shaw, N; Bouchlaghem, D and Demian, P (2010) Key influences of innovation magnitude and mode. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 163(4), pp. 161-169. ISSN 17514312

Shiers, D; Lavers, A and Keeping, M (2007) Indicators of the impact of environmental factors on UK construction law: Developments in the new millennium. Construction Management and Economics, 25(7), pp. 821-829. ISSN 1466433X

Showalter, W E and Halpin, D W (2008) Dynamic programming approach to optimization of site remediation. Journal of Construction Engineering and Management, 134(10), pp. 820-827. ISSN 0733-9364

Shrivastava, S and Chini, A (2012) Using building information modeling to assess the initial embodied energy of a building. International Journal of Construction Management, 12(1), pp. 51-63. ISSN 1562-3599

Sica, G (2014) Groundborne vibrations caused by railway construction and operation in buildings: Design, implementation and analysis of measurement for assessment of human exposure. PhD thesis, University of Salford, UK.

Siddiqi, K M (1997) Framework for analyzing construction alternatives with respect to environmental laws. PhD thesis, Georgia Institute of Technology, USA.

Siddiqui, R A; Adamu, Z; Ebohon, O J and Aslam, W (2025) Factors affecting intention to adopt green building practices: A journey towards meeting sustainable goals. Construction Innovation, 25(6), pp. 1797-1820. ISSN 1471-4175

Siew, R Y J; Balatbat, M C A and Carmichael, D G (2013) A review of building/infrastructure sustainability reporting tools (SRTs). Smart and Sustainable Built Environment, 2(2), pp. 106-139. ISSN 2046-6099

Simmonds, D M (2015) Information technology and sustainability: An empirical study of the value of the building automation system. PhD thesis, University of South Florida, USA.

Simpeh, E K (2018) The adoption of green building in South Africa. PhD thesis, Nelson Mandela University, South Africa.

Small-Warner, K (2022) Adopting sustainable business models in small island developing states (SIDS): buildings and construction sector. PhD thesis, De Montfort University, UK.

Smith, C; Drinkwater, A; Modlich, M; Horst, D V D and Doherty, R (2024) IAQ and environmental health literacy: Lived experiences of vulnerable people. Buildings & Cities, 5(1), pp. 231-246. ISSN 2632-6655

Soomro, B A and Shah, N (2022) Environmental concerns among the entrepreneurs: A disaster resilience and environment building during the second wave of the COVID-19. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 516-530. ISSN 1759-5916

Stenberg, A-C I (2006) The social construction of green building: Diachronic and synchronic perspectives. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Surahyo, M and El-Diraby, T E (2009) Schema for interoperable representation of environmental and social costs in highway construction. Journal of Construction Engineering and Management, 135(4), pp. 254-266. ISSN 0733-9364

Tariq, M (2012) Green supply chain assessment model for construction projects in the UAE. PhD thesis, University of Salford, UK.

Tatari, O and Kucukvar, M (2012) Sustainability assessment of U.S. Construction sectors: Ecosystems perspective. Journal of Construction Engineering and Management, 138(8), pp. 918-922. ISSN 0733-9364

Taylor, J and Howden-Chapman, P (2021) The significance of urban systems on sustainability and public health. Buildings & Cities, 2(1), pp. 874-887. ISSN 2632-6655

Telem, D; Laufer, A and Shapira, A (2006) Only dynamics can absorb dynamics. Journal of Construction Engineering and Management, 132(11), pp. 1167-1177. ISSN 0733-9364

Theaker, I G and Cole, R J (2001) The role of local governments in fostering 'green' buildings: A case study. Building Research & Information, 29(5), pp. 394-408. ISSN 0961-3218

Thorpe, D and Zhuge, Y (2010) Advantages and disadvantages in using permeable concrete pavement as a pavement construction material. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Tinker, A and Burt, R (2004) "Greening" the construction curriculum. International Journal of Construction Education and Research, 1(1), pp. 26-33. ISSN 1557-8771

Tonna, Ren P (2021) How stakeholders experience and value the sustainable design elements of a residential high-rise building. PhD thesis, Griffith University, Australia.

Tozer, L; Macrae, H and Smit, E (2023) Achieving deep-energy retrofits for households in energy poverty. Buildings & Cities, 4(1), pp. 258-273. ISSN 2632-6655

Tumpa, R J and Naeni, L (2025) Improving decision-making and stakeholder engagement at project governance using digital technology for sustainable infrastructure projects. Smart and Sustainable Built Environment, 14(4), pp. 1292-1329. ISSN 2046-6099

Unuigbe, M and Zulu, S L (2024) Preparedness for a low-carbon future: Knowledge level of built environment students. International Journal of Disaster Resilience in the Built Environment, 15(3), pp. 357-369. ISSN 1759-5916

Venkataraman, V (2017) Investigating the impact of project management factors on green building project delivery using link analysis and system dynamics techniques. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Veselka, J (2023) BIM data structure in the building optimization: Methodology for model development. PhD thesis, Czech Technical University, Czech Republic.

Vinodh, S and Jayakrishna, K (2014) Development of integrated ecqfd, LCA and sustainable analysis model: A case study in an automotive component manufacturing organization. Journal of Engineering, Design and Technology, 12(1), pp. 102-127. ISSN 1726-0531

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Vo, H. M. and Yang, J. B. (2026) Incorporating stakeholder perception into risk assessment model: An empirical study of highway construction projects. Engineering, Construction and Architectural Management, 33(7), pp. 5244-5274. ISSN 0969-9988

Wagner, E R (2003) Using quality function deployment to achieve a market orientation: An application with wood products companies. PhD thesis, Oregon State University, USA.

Warren-Myers, G; Judge, M and Paladino, A (2018) Sustainability ratings in residential development: A worthwhile endeavour? International Journal of Building Pathology and Adaptation, 36(4), pp. 353-372. ISSN 23984708

Watson, S (2004) Improving the implementation of environmental strategies in the design of buildings: Towards a life-cycle based, front loaded, framework for building environmental assessment during design. PhD thesis, University of Queensland, Australia.

Weerasinghe, A S; Ramachandra, T and Rotimi, J O B (2022) Towards sustainable commercial buildings: An analysis of operation and maintenance (O&M) costs in Sri Lanka. Smart and Sustainable Built Environment, 11(3), pp. 454-468. ISSN 2046-6099

Wiegand, E and Ramage, M (2022) The impact of policy instruments on the first generation of tall wood buildings. Building Research & Information, 50(3), pp. 255-275. ISSN 0961-3218

Wong, Kwok Tung Thomas (2006) Strategies for environmental sustainability in Hong Kong's construction industry. PhD thesis, University of South Australia, Australia.

Wu, P (2011) Application of the lean philosophy to reduce carbon emissions in the precast concrete industry of Singapore. PhD thesis, National University of Singapore, Singapore.

Yap, J B H; Teh, Y H; Loo, S C and Sulaiman, Z B (2024) Benefits of green procurement: Perspectives from the Malaysian construction industry. International Journal of Construction Management, 24(14), pp. 1530-1539. ISSN 1562-3599

Yates, J K (2014) Design and construction for sustainable industrial construction. Journal of Construction Engineering and Management, 140(4): B4014005, ISSN 0733-9364

York, J G (2009) The entrepreneurial creation of public goods: Evidence from the green building and renewable energy industries. PhD thesis, University of Virginia, USA.

Zarghami, S A and Ahmad, T (2026) Empirical evaluation of the LEED green building rating system: Exploring limitations through configurational analysis. Building Research & Information, 54(2), pp. 257-272. ISSN 0961-3218

Zeng, Q and Pishdad-Bozorgi, P (2025) The evolution of sustainable building rating tools: A systematic literature review. Smart and Sustainable Built Environment, 14(4), pp. 1230-1263. ISSN 2046-6099

Zhai, X; Reed, R and Mills, A (2014) Embracing off-site innovation in construction in China to enhance a sustainable built environment in urban housing. International Journal of Construction Management, 14(3), pp. 123-133. ISSN 1562-3599

Zhou, Z; Shen, G; Xue, J; Sun, C; Liu, Y; Cong, W; Yu, T and Wang, Y (2025) The formation of citizens' intentions to purchase prefabricated housing in China: The integrating theory of planned behavior and norm activation model. Engineering, Construction and Architectural Management, 32(3), pp. 1759-1780. ISSN 0969-9988