Items with Subject: data management

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abbasi, M H (2024) Phasing out fossil fuel heating in UK homes: A multi-dimensional framework for sustainability assessment of alternatives and their lifecycle implications. PhD thesis, Liverpool John Moores University, UK.

Abdel-Wahab, M and Vogl, B (2011) Trends of productivity growth in the construction industry across Europe, US and Japan. Construction Management and Economics, 29(6), pp. 635-644. ISSN 1466433X

Abdelaty, A F A (2017) Data-driven algorithms for enhanced transportation infrastructure asset management. PhD thesis, Iowa State University, USA.

Abdelgawad, M A M (2011) Hybrid decision support system for risk criticality assessment and risk analysis. PhD thesis, University of Alberta, Canada.

Abdelgawad, M A M and Fayek, A R (2010) Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP. Journal of Construction Engineering and Management, 136(9), pp. 1028-1036. ISSN 0733-9364

Abdelkader, E M; Moselhi, O; Marzouk, M and Zayed, T (2021) Integrative evolutionary-based method for modeling and optimizing budget assignment of bridge maintenance priorities. Journal of Construction Engineering and Management, 147(9): 04021100, ISSN 0733-9364

Abdenour, J I (2021) A cost estimation model for improving the budget estimates of industrial plant construction projects. DEng thesis, George Washington University, USA.

Abdollahipour, S (2013) Multi-parameter bidding in highway construction and rehabilitation projects. PhD thesis, Oklahoma State University, USA.

Abduh, M (2000) Utility assessment of electronic networking technologies for design -build projects. PhD thesis, Purdue University, USA.

Abduh, M and Skibniewski, M J (2004) Electronic networking technologies in construction. Journal of Construction Research, 5(1), pp. 17-42. ISSN 1609-9451

Abdullah Sani, H. A. and Jaafar, N. I. (2026) Exploring the impact of IoT on governance and public service transformation: Evidence from malaysia's public sector. Smart and Sustainable Built Environment, 15(5), pp. 1991-2014. ISSN 2046-6099

Abdullahi, I (2000) Development of a funding model for allocating capital grants to the federal universities in Nigeria. PhD thesis, Abertay University, UK.

Abdullatif, M I (1992) A system for quality-related costs for construction projects. PhD thesis, University of Kansas, USA.

Aboseif, E and Hanna, A S (2024) Benchmarking of construction projects performance for comparative assessment and performance improvement: A statistical quantitative approach. Engineering, Construction and Architectural Management, 31(7), pp. 2829-2851. ISSN 0969-9988

Abou-Zeid, A M K (1993) Data flow identification to support project automation/integration and productivity. PhD thesis, University of Wisconsin - Madison, USA.

Abounia Omran, B (2016) Application of data mining and big data analytics in the construction industry. PhD thesis, Ohio State University, USA.

Abreu, M M and Lordsleem, A C (2019) Aluminum formwork system: Loss and productivity. Built Environment Project and Asset Management, 9(5), pp. 616-627. ISSN 2044-124X

Abu Dabous, S; Alzghoul, A and Ibrahim, F (2025) Intelligent condition prediction model for bridge infrastructure based on evaluating machine learning algorithms. Smart and Sustainable Built Environment, 14(2), pp. 557-576. ISSN 2046-6099

Abu Samra, S; Ahmed, M; Hammad, A and Zayed, T (2018) Multiobjective framework for managing municipal integrated infrastructure. Journal of Construction Engineering and Management, 144(1): 04017091, ISSN 0733-9364

Abubakar, M; Abdullahi, M and Bala, K (2018) Analysis of the causality links between the growth of the construction industry and the growth of the Nigerian economy. Journal of Construction in Developing Countries, 23(1), pp. 103-113. ISSN 1823-6499

Abudayyeh, O; Federicks, T; Palmquist, M and Torres, H N (2003) Analysis of occupational injuries and fatalities in electrical contracting industry. Journal of Construction Engineering and Management, 129(2), pp. 152-158. ISSN 0733-9364

Abudayyeh, O Y (1991) An automated data acquisition and data storage model for improving cost and schedule control. PhD thesis, North Carolina State University, USA.

Abudayyeh, O Y and Rasdorf, W J (1991) Design of construction industry information management systems. Journal of Construction Engineering and Management, 117(4), pp. 698-715. ISSN 0733-9364

Abukhder, J and Munns, A K (2003) Attributing management problems on construction projects to project information. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Acharya, P; Sharma, K; Pokharel, G R and Adhikari, R (2022) Reviewing the progress of reconstruction five years after the 2015 gorkha earthquake, Nepal. Building Research & Information, 50(6), pp. 595-609. ISSN 0961-3218

Achour, N and Price, A D F (2010) Resilience strategies of healthcare facilities: Present and future. International Journal of Disaster Resilience in the Built Environment, 1(3), pp. 264-276. ISSN 1759-5916

Adah, C A; Aghimien, D O and Oshodi, O (2025) Work–life balance in the construction industry: A bibliometric and narrative review. Engineering, Construction and Architectural Management, 32(1), pp. 38-58. ISSN 0969-9988

Adamtey, S (2021) Cost and time performance analysis of progressive design-build projects. Journal of Engineering, Design and Technology, 19(3), pp. 686-697. ISSN 1726-0531

Addy, M N; Dadzoe, F; Kwofie, T E; Aigbavboa, C and Simons, B (2024) Innovative green construction adoption in Ghana: Architects' perspectives from theory of planned behaviour. Built Environment Project and Asset Management, 14(5), pp. 782-797. ISSN 2044-124X

Adebisi, J and McArthur, J J (2025) HVAC characterisation of existing Canadian buildings for decarbonisation retrofit identification. Buildings & Cities, 6(1), pp. 729-746. ISSN 2632-6655

Adebowale, O J and Agumba, J N (2023) A meta-analysis of factors affecting construction labour productivity in the middle East. Journal of Construction in Developing Countries, 28(1), pp. 193-220. ISSN 1823-6499

Adebowale, O J and Agumba, J N (2024) Applications of augmented reality for construction productivity improvement: A systematic review. Smart and Sustainable Built Environment, 13(3), pp. 479-495. ISSN 2046-6099

Adebowale, O J and Agumba, J N (2024) A systematic review of challenges undermining the efficacy of construction health and safety regulations in major African countries. Construction Economics and Building, 24(4-5), pp. 1-24. ISSN 2204-9029

Adedokun, O; Egbelakin, T and Omotayo, T (2024) Random forest and path diagram taxonomies of risks influencing higher education construction projects. International Journal of Construction Management, 24(1), pp. 66-74. ISSN 1562-3599

Adekunle, S A; Aigbavboa, C O; Ejohwomu, O; Adekunle, E A and Thwala, W D (2024) Digital transformation in the construction industry: A bibliometric review. Journal of Engineering, Design and Technology, 22(1), pp. 130-158. ISSN 1726-0531

Adeyemi, H O; Adejuyigbe, S B; Ismaila, S O and Adekoya, A F (2015) Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(3), pp. 419-434.

Adi Maimun, N H (2016) Price and rent effects of energy efficiency in residential properties: evidence from the Belfast Metropolitan area. PhD thesis, Ulster University, UK.

Adibfar, A and Costin, A M (2022) Creation of a mock-up bridge digital twin by fusing intelligent transportation systems (ITS) data into bridge information model (brim). Journal of Construction Engineering and Management, 148(9): 04022094, ISSN 0733-9364

Adjei-Kumi, T (1997) The development of an intelligent system for visual simulation of construction projects. PhD thesis, University of Strathclyde, UK.

Adu-Gyamfi, B; Ariyaningsih, A; Zuquan, H; Yamazawa, N; Kato, A and Shaw, R (2024) Reflections on science, technology and innovation on the aspirations of the Sendai framework for disaster risk reduction. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 289-302. ISSN 1759-5916

Afkhamiaghda, M and Elwakil, E (2023) Challenges review of decision making in post-disaster construction. International Journal of Construction Management, 23(14), pp. 2409-2418. ISSN 1562-3599

Afolabi, A; Oyeyipo, O; Ojelabi, R and Patience, T O (2019) Balancing the female identity in the construction industry. Journal of Construction in Developing Countries, 24(2), pp. 83-104. ISSN 1823-6499

Afzal, Muneeb (2024) Improving request for information (RFI) processing in construction projects using natural language processing (NLP) techniques. PhD thesis, University of Technology Sydney, Australia.

Agdas, D and Ellis, R D (2010) The potential of xml technology as an answer to the data interchange problems of the construction industry. Construction Management and Economics, 28(7), pp. 737-746. ISSN 1466433X

Aggarwal, A; Rani, A and Kumar, M (2020) A robust method to authenticate car license plates using segmentation and ROI based approach. Smart and Sustainable Built Environment, 9(4), pp. 737-747. ISSN 2046-6099

Aghajamali, K; Metvaei, S; Suliman, A; Lei, Z and Chen, Q (2025) Development of a prefabricated construction productivity estimation model through BIM and data augmentation processes. Construction Management and Economics, 43(5), pp. 340-359. ISSN 0144-6193

Aghili, S. A.; Khanzadi, M.; Haji Mohammad Rezaei, A. and Rahbar, M. (2026) Data-driven approach to fault detection for hospital HVAC system. Smart and Sustainable Built Environment, 15(2), pp. 765-788. ISSN 2046-6099

Aghimien, D O; Aigbavboa, C O; Oke, A E and Thwala, W D (2020) Mapping out research focus for robotics and automation research in construction-related studies: A bibliometric approach. Journal of Engineering, Design and Technology, 18(5), pp. 1063-1079. ISSN 1726-0531

Aghimien, E I; Aghimien, L M; Petinrin, O O and Aghimien, D O (2021) High-performance computing for computational modelling in built environment-related studies: A scientometric review. Journal of Engineering, Design and Technology, 19(5), pp. 1138-1157. ISSN 1726-0531

Agyemang, E A; Musonda, I and Zulu, S (2024) Assessing the impact of shareholder focus and productivity pursuit on safety performance: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Agyemang, E A; Musonda, I and Zulu, S (2025) Stakeholder theory and shareholder theory application in the construction field: A systematic scoping review. Construction Economics and Building, 25(2), pp. 89-111. ISSN 2204-9029

Ahiaga-Dagbui D D, T O and Smith S D, W S (2013) A neuro-fuzzy hybrid model for predicting final cost of water infrastructure projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ahmad, I U (1988) Bidding strategy: Multicriteria decision-making approach. PhD thesis, University of Cincinnati, USA.

Ahmad, R K (2000) Developing a proactive safety performance measurement tool (SPMT) for construction sites. PhD thesis, Loughborough University, UK.

Ahmad, T and Aibinu, A A (2017) Project delivery attributes influencing green building project outcomes: A review and future research directions. Built Environment Project and Asset Management, 7(5), pp. 471-489. ISSN 2044-124X

Ahmadian Fard Fini, Alireza (2017) Optimizing crew performance through integration of human resource strategies into planning of construction activities. PhD thesis, University of New South Wales, Australia.

Ahmed, M O; El-Adaway, I H; Coatney, K T and Eid, M S (2016) Construction bidding and the winner's curse: Game theory approach. Journal of Construction Engineering and Management, 142(2): 04015076, ISSN 0733-9364

Ahmed, M O and El-adaway, I H (2023) An integrated game-theoretic and reinforcement learning modeling for multi-stage construction and infrastructure bidding. Construction Management and Economics, 41(3), pp. 183-207. ISSN 01446193

Ahmed, Q A (1993) A knowledge-based system approach to work shift selection for multilane highway reconstruction and maintenance projects. PhD thesis, University of Florida, USA.

Ahuja, V; Yang, J; Skitmore, M and Shankar, R (2010) An empirical test of causal relationships of factors affecting ICT adoption for building project management: An Indian SME case study. Construction Innovation, 10(2), pp. 164-180. ISSN 1471-4175

Aigbavboa, C and Thwala, W (2013) The role of beneficiaries' participation in South Africa low-income housing occupants' satisfaction. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Aigbavboa, C O; Aghimien, D O; Thwala, W D and Ngozwana, M N (2022) Unprepared industry meet pandemic: COVID-19 and the South Africa construction industry. Journal of Engineering, Design and Technology, 20(1), pp. 183-200. ISSN 1726-0531

Ainoo, F N Y (2025) Leveraging big data in AEC decision-making: A governance framework. PhD thesis, Capella University, USA.

Ajani, A A and Olapade, D T (2025) Building design considerations for healthy and active aging-in-place. International Journal of Building Pathology and Adaptation, 43(6), pp. 1466-1481. ISSN 2398-4708

Akbari, S; Khanzadi, M and Gholamian, M R (2018) Building a rough sets-based prediction model for classifying large-scale construction projects based on sustainable success index. Engineering, Construction and Architectural Management, 25(4), pp. 534-558. ISSN 0969-9988

Akbil, E and Butterworth, C (2025) Urban rooms and the expanded ecology of urban living labs. Buildings & Cities, 6(1), pp. 544-560. ISSN 2632-6655

Akeel, N F (1989) A database tool for statistically based construction cost estimate. PhD thesis, University of Colorado at Boulder, USA.

Akinlolu, M; Haupt, T C; Edwards, D J and Simpeh, F (2022) A bibliometric review of the status and emerging research trends in construction safety management technologies. International Journal of Construction Management, 22(14), pp. 2699-2711. ISSN 1562-3599

Akinlolu Temisola, M; Oladimeji Benedict, O and Haupt, T C (2021) A scientometric review and meta-analysis of the health and safety of women in construction: Structure and research trends. Journal of Engineering, Design and Technology, 19(2), pp. 446-466. ISSN 1726-0531

Akintoye, A (1995) Just-in-time application and implementation for building material management. Construction Management and Economics, 13(2), pp. 105-113. ISSN 01446193

Akintoye, A S; Ajewole, O and Olomolaiye, P O (1992) Construction cost information management in Nigeria. Construction Management and Economics, 10(2), pp. 107-116. ISSN 01446193

Akrawi, S G (1998) Sensing and real-time expert system for a masonry building robot. PhD thesis, City, University of London, UK.

Al Jassmi, H; Al Ahmad, M and Ahmed, S (2021) Automatic recognition of labor activity: A machine learning approach to capture activity physiological patterns using wearable sensors. Construction Innovation, 21(4), pp. 555-575. ISSN 1471-4175

Al-Ajam, M (2008) Integrating collaborative extranets with project integrated databases to improve the construction tender stage. PhD thesis, University of Salford, UK.

Al-Aomar, R; AlTal, M and Abel, J (2024) A data-driven predictive maintenance model for hospital HVAC system with machine learning. Building Research & Information, 52(1-2), pp. 207-224. ISSN 0961-3218

Al-Aubaidy, N A (2015) Factors affecting underreporting of construction safety incidents on capital projects. PhD thesis, University of Texas at Austin, USA.

Al-Bayati, A J and Al-Zubaidi, H A (2018) Inventory of nanomaterials in construction products for safety and health. Journal of Construction Engineering and Management, 144(9): 06018004, ISSN 0733-9364

Al-Bizri, S (1995) Design management plan generator, knowledge-based system for planning the design processes in the construction industry. PhD thesis, University of Reading, UK.

Al-Bizri, S and Gray, C (2014) A decision support framework for hcai risk assessment and design briefing of healthcare facilities. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Al-Hadidi, S; Sweis, G; Abu-Khader, W; Abu-Rumman, G and Sweis, R (2024) Managing future urbanization growth patterns using genetic algorithm modeling. Engineering, Construction and Architectural Management, 31(7), pp. 2648-2668. ISSN 0969-9988

Al-Hammad, I A (1991) A knowledge-based framework for construction methods selection. PhD thesis, University of British Columbia, Canada.

Al-Harasis, D H; Jabi, W and Sharmin, T (2025) Developing a taxonomy for sensory-informed architectural design qualities in autism. Building Research & Information, 53(4), pp. 532-551. ISSN 0961-3218

Al-Harbi, K M; Johnston, D W and Fayadh, H (1994) Building construction detailed estimating practices in saudi arabia. Journal of Construction Engineering and Management, 120(4), pp. 774-784. ISSN 0733-9364

Al-Hussein, M (1999) An integrated information system for crane selection and utilisation. PhD thesis, Concordia University, Canada.

Al-Hussein, M; Alkass, S and Moselhi, O (2001) An algorithm for mobile crane selection and location on construction sites. Construction Innovation, 1(2), pp. 91-105. ISSN 1471-4175

Al-Hussein, M; Alkass, S and Moselhi, O (2005) Optimization algorithm for selection and on site location of mobile cranes. Journal of Construction Engineering and Management, 131(5), pp. 579-590. ISSN 0733-9364

Al-Hussein, M; Kumar, J; Sharma, V and Mah, D (2006) A knowledge-based automated development permit approval process in the housing industry. Engineering, Construction and Architectural Management, 13(3), pp. 290-306. ISSN 0969-9988

Al-Qalyuby, H A (2005) Inductive learning methodology using OSHA construction accident and citation data. PhD thesis, Wayne State University, USA.

Al-Qazzaz, I; Osorio-Sandoval, C A; Tokbolat, S and Thermou, G (2025) Integration of building information modeling into building circularity assessment: A systematic review. Built Environment Project and Asset Management, 15(3), pp. 574-593. ISSN 2044-124X

Al-Shahrani, M S (2009) Developing a framework of knowledge management system for project management in the construction industry. PhD thesis, University of Manchester, UK.

Alade, K and Windapo, A O (2021) Developing effective 4IR leadership framework for construction organisations. Engineering, Construction and Architectural Management, 28(5), pp. 1377-1396. ISSN 0969-9988

Alaka, H A; Oyedele, L O; Owolabi, H A; Ajayi, S O; Bilal, M and Akinade, O O (2016) Methodological approach of construction business failure prediction studies: A review. Construction Management and Economics, 34(11), pp. 808-842. ISSN 01446193

Alameri, R and Esmaeili, B (2023) Progressive design-build delivery method: Assessment of project performance. International Journal of Construction Education and Research, 19(1), pp. 22-41. ISSN 1557-8771

Alankarage, S; Chileshe, N; Samaraweera, A; Rameezdeen, R and Edwards, D J (2022) Organisational culture in building information modelling maturity research: A bibliometric analysis. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Alansari, A M (2019) Risk assessment for marine construction projects. PhD thesis, Claremont Graduate University, USA.

Aleithawe, I; Sinno, R R and McAnally, W H (2012) Right-of-way acquisition duration prediction model for highway construction projects. Journal of Construction Engineering and Management, 138(4), pp. 540-544. ISSN 0733-9364

Alfar, E (2016) GIS-based pavement maintenance management model for local roads in the UK. PhD thesis, University of Salford, UK.

Alhadidi, Suleiman (2023) Real-time architecture: Quantifying the spatial performance of workplaces. DDes thesis, Harvard University, USA.

Alhallaq, M. and Artan, D. (2026) Assessing contractors' circular economy performance: Barriers and system requirements. International Journal of Building Pathology and Adaptation, pp. 1-20. ISSN 2398-4708

Alhammadi, Y (2017) Developing and evaluation the implementation of construction management research in the Saudi construction industry. PhD thesis, Arizona State University, USA.

Alhassan, T.; Owusu-Ansah, A.; Kidido, J. K. and Adjei-Twum, A. (2026) Climate change adaptation in facilities management: A systematic literature review. International Journal of Building Pathology and Adaptation, 44(4), pp. 867-884. ISSN 2398-4708

Ali, Atif (2010) Investigating project management practices in public sector organisations of a less developed country. PhD thesis, RMIT University, Australia.

Ali, B; Aibinu, A A and Paton-Cole, V (2024) Closing the information gaps: A systematic review of research on delay and disruption claims. Construction Innovation, 24(3), pp. 790-810. ISSN 1471-4175

Ali, Y; Sabir, M and Muhammad, N (2019) A comparative input-output analysis of the construction sector in three developing economies of South Asia. Construction Management and Economics, 37(11), pp. 643-658. ISSN 01446193

Aliasgari, R; Fan, C; Li, X; Golabchi, A and Hamzeh, F (2024) MOCAP and ai-based automated physical demand analysis for workplace safety. Journal of Construction Engineering and Management, 150(7): 04024060, ISSN 0733-9364

Alim, S (1985) Fuzzy expert systems in civil engineering. PhD thesis, Imperial College London, UK.

Aliu, J and Aigbavboa, C (2023) Reviewing the trends of construction education research in the last decade: A bibliometric analysis. International Journal of Construction Management, 23(9), pp. 1571-1580. ISSN 1562-3599

Aliu, J and Aigbavboa, C (2023) Reviewing the roles of extracurricular activities in developing employability skills: A bibliometric review. International Journal of Construction Management, 23(10), pp. 1623-1632. ISSN 1562-3599

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects generation in construction projects. PhD thesis, University of New South Wales, Australia.

Aljassmi, Hamad Abdulla (2013) Analysis of complex mechanisms of defect generation in construction projects. PhD thesis, University of New South Wales, Australia.

Alkaabi, J A (1994) Improved materials management using automatic identification techniques. PhD thesis, Loughborough University, UK.

Alkasisbeh, M R (2018) An integrated decision support framework for life-cycle building asset management. PhD thesis, Western Michigan University, USA.

Alkass, S; Alhussein, M and Moselhi, O (1997) Computerized crane selection for construction projects. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Alkass, S; Arouian, A and Moselhi, O (1993) Computer-aided equipment selection for transporting and placing concrete. Journal of Construction Engineering and Management, 119(3), pp. 445-465. ISSN 0733-9364

Alkass, S and Harris, F (1988) Expert system for earthmoving equipment selection in road construction. Journal of Construction Engineering and Management, 114(3), pp. 426-440. ISSN 0733-9364

Alkass, S and Harris, F (1991) Development of an integrated system for planning earthwork operations in road construction. Construction Management and Economics, 9(3), pp. 263-289. ISSN 01446193

Alkass, S; Mazerolle, M and Harris, F (1996) Construction delay analysis techniques. Construction Management and Economics, 14(5), pp. 375-394. ISSN 01446193

Alkass, S; Tribaldos, E; Mazerolle, M and Harris, F (1995) Computer aided construction delay analysis and claims preparation. Construction Management and Economics, 13(4), pp. 335-352. ISSN 01446193

Alkass, S T (1988) An expert system applied to earthmoving operations and equipment selection. PhD thesis, Loughborough University, UK.

Alkoc, E and Erbatur, F (1997) Productivity improvement in concreting operations through simulation models. Building Research & Information, 25(2), pp. 82-91. ISSN 0961-3218

Alkoc, E and Erbatur, F (1998) Site expert: A prototype knowledge-based expert system. Engineering, Construction and Architectural Management, 5(3), pp. 238-251. ISSN 0969-9988

Alkoud, S. and Qatamin, L. (2025) Global trends and future directions of virtual teams in the workplace: A bibliometric analysis. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 179(2), pp. 108-115. ISSN 1751-4304

Alleman, D and Lee, E B (2020) Mitigating the legal challenges of imposing disincentives on nonperforming transportation projects. Engineering, Construction and Architectural Management, 27(10), pp. 2859-2891. ISSN 0969-9988

Allen, S (1997) Information management for housing maintenance: a systemic view. PhD thesis, University of Salford, UK.

Allouche, E N (2001) A decision-support model for selection of a trenchless construction method. PhD thesis, University of Alberta, Canada.

Allouche, E N; Ariaratnam, S T and MacLeod, C W (2003) Software for planning and cost control in directional drilling projects. Journal of Construction Engineering and Management, 129(4), pp. 446-453. ISSN 0733-9364

Almatared, M M S (2024) An integrated digital twin framework and evacuation simulation system for enhanced safety in smart buildings. PhD thesis, Western Michigan University, USA.

Almeida, Y. and Calejo, R. (2026) Innovation in public works management: Proposal for a performance evaluation model based on cost and deadline indicators. Construction Management and Economics, 44(9), pp. 721-740. ISSN 0144-6193

Almomani, A Q M; Almeida, R M S F; Vicente, R and Barreira, E (2025) Long-term monitoring of thermal comfort in three apartments in Jordan. Building Research & Information, 53(8), pp. 965-982. ISSN 0961-3218

Alnaggar, Ahmed Mohamed Mohamed Moustafa (2022) Digital transformation in asset management organisations: towards a data driven approach for life cycle asset management. PhD thesis, University College London, UK.

Alnahari, Mohammed Saeed (2023) Exploring the potential of blockchain technology for improved management and safety of underground utilities. PhD thesis, Arizona State University, USA.

Alnajjar, A (1995) Hyper automated estimating support system. PhD thesis, Illinois Institute of Technology, USA.

Alnaqbi, A; Al-Khateeb, G G and Zeiada, W (2025) Machine learning applications for predicting longitudinal cracking in continuously reinforced concrete pavement. Construction Economics and Building, 25(1), pp. 143-170. ISSN 2204-9029

Alnaser, N W (2010) Utilisation of solar and wind energy in buildings in the Kingdom of Bahrain: a step towards sustainable building construction. PhD thesis, University of Reading, UK.

Alnsour, J A M (2006) Planning and managing the built environment in the context of compliance with residential standards in Jordan. PhD thesis, University of Huddersfield, UK.

Alnuaimi, A S; Taha, R A; Al Mohsin, M and Al-Harthi, A S (2010) Causes, effects, benefits, and remedies of change orders on public construction projects in Oman. Journal of Construction Engineering and Management, 136(5), pp. 615-622. ISSN 0733-9364

Alothman, A and Vilventhan, A (2025) Development of building information model-enabled facility management for metro rail stations. Journal of Construction Engineering and Management, 151(3): 05024018, ISSN 0733-9364

Alqady, M (2012) Leveraging text content for management of construction project documents. PhD thesis, Purdue University, USA.

Alreshidi, E (2015) Towards facilitating team collaboration during construction project via the development of cloud-based BIM governance solution. PhD thesis, Cardiff University, UK.

Alsamarraie, M M; Yousif, O S and Ghazali, F E M (2025) Procurement integrity: Best practices for PPP projects in Iraq and Malaysia. Construction Economics and Building, 25(3-4), pp. 289-310. ISSN 2204-9029

Alshawi, M A and Hope, A E (1989) Expert systems and contractual disputes: Extension of time under JCT 80. Construction Management and Economics, 7(1), pp. 65-74. ISSN 01446193

Alshboul, O; Shehadeh, A; Al-Kasasbeh, M; Al Mamlook, R E; Halalsheh, N and Alkasasbeh, M (2022) Deep and machine learning approaches for forecasting the residual value of heavy construction equipment: A management decision support model. Engineering, Construction and Architectural Management, 29(10), pp. 4153-4176. ISSN 0969-9988

Alshibani, A (2008) Optimizing and controlling earthmoving operations using spatial technologies. PhD thesis, Concordia University, Canada.

Alsubaey, M H (2017) A hybrid machine learning and text-mining approach for the automated generation of early warnings in construction project management. PhD thesis, Cranfield University, UK.

Alsugair, A M (1992) An intelligent resource allocation system. PhD thesis, Texas A&M University, USA.

Altamimi, M (2024) BIM adoption in local-based architecture and engineering SMEs : Developing an application-based method to pinpoint objective BIM uses and align them with business standards to facilitate the execution of BIM projects in prospective architecture and engineering SMEs. PhD thesis, University of Pécs, Hungary.

Altawil, Shadi N A (2017) Multi-level knowledge extraction and modeling to support job hazard analysis process for oil and gas pipeline projects. PhD thesis, University of Alberta, Canada.

Altomonte, S; Schiavon, S; Kent, M G and Brager, G (2019) Indoor environmental quality and occupant satisfaction in green-certified buildings. Building Research & Information, 47(3), pp. 255-274. ISSN 0961-3218

Alves, T d C L; Neuman, Y; Walsh, K D; Needy, K L and AlMaian, R (2020) Highly effective companies in supplier quality surveillance practices: A quantitative analysis. Construction Management and Economics, 38(3), pp. 239-258. ISSN 01446193

Alves Tenório de Morais, G and Casado Lordsleem Júnior, A (2019) Building maintenance management activities in a public institution. Engineering, Construction and Architectural Management, 26(1), pp. 85-103. ISSN 0969-9988

Alwisy, A; Bouferguene, A and Al-Hussein, M (2020) Framework for target cost modelling in construction projects. International Journal of Construction Management, 20(2), pp. 89-104. ISSN 1562-3599

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Alzraiee, H (2022) Cost estimate system using structured query language in BIM. International Journal of Construction Management, 22(14), pp. 2731-2743. ISSN 1562-3599

Amadi, A I (2026) Construction economics at early stage: Order of cost estimating, life cycle costing and development appraisal of a proposed office complex. International Journal of Building Pathology and Adaptation, 44(1), pp. 70-90. ISSN 2398-4708

Amarasinghe, I A and Hadiwattege, C (2022) Enablers for facilitating life cycle assessment: Key stakeholder perspectives of Sri Lankan construction industry. Built Environment Project and Asset Management, 12(4), pp. 590-612. ISSN 2044-124X

Amin, S H (2024) Predictive relationship in time and cost between planning and construction phases in capital projects. DBA thesis, Grand Canyon University, USA.

Amini Khafri, Amin (2018) A framework for forecasting project estimate at completion using historical and current performance data. PhD thesis, University of Alberta, Canada.

Amirkhanian, S N and Baker, N J (1992) Expert system for equipment selection for earth-moving operations. Journal of Construction Engineering and Management, 118(2), pp. 318-331. ISSN 0733-9364

Ammar, Ashtarout (2023) Digital twins for ancillary transportation asset data management. PhD thesis, University of Kentucky, USA.

Ammar, T; Abdel-Monem, M and El-Dash, K (2025) Regression-based model predicting cost contingencies for road network projects. International Journal of Construction Management, 25(11), pp. 1273-1287. ISSN 1562-3599

Andersen, T O M and Gaarslev, A (1996) Perspectives on artificial intelligence in the construction industry. Engineering, Construction and Architectural Management, 3(1-2), pp. 3-14. ISSN 0969-9988

Anderson, S d (1989) Potential for construction industry improvement. PhD thesis, University of Texas at Austin, USA.

Andrews, F; Sal Moslehian, A; Johnston, N and Tucker, R (2024) Impacts of building defects on the health and wellbeing of apartment residents: A scoping review. Building Research & Information, 52(4), pp. 446-462. ISSN 0961-3218

Annor, John (2025) Building pathways to the future: Leveraging collaborative instruction platforms to address global and regional challenges in construction workforce education. PhD thesis, University of Wyoming, USA.

Anumba, C; Dainty, A R J; Ison, S G and Sergeant, A (2005) The application of GIS to construction labour market planning. Construction Innovation, 5(4), pp. 219-230. ISSN 1471-4175

Aouad, G F (1991) Integrated planning systems for the construction industry. PhD thesis, Loughborough University, UK.

Aouad, G F; Bakis, N; Amaratunga, D; Osbaldiston, S; Sun, M; Kishk, M; Al-Hajj, A and Pollock, R (2001) An integrated life cycle costing database: A conceptual framework. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Aouad, G F; Child, T; Brandon, P S and Sarshar, M (1998) Linking construction information through VR using an object oriented environment. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Aouad, G F; Ford, S R; Kirkham, J A; Child, T; Cooper, G S; Brandon, P S; Brown, F E; Oxman, R E and Young, B (1994) Knowledge elicitation using protocol analysis in a workshop environment. Construction Management and Economics, 12(3), pp. 271-278. ISSN 01446193

Aouad, G F; Kawooya, A A O and Price, A D F (1996) Construction planning models: A review of history, capabilities and limitations. Journal of Construction Procurement, 2(2), pp. 19-37. ISSN 1358-9180

Aouad, G F; Kirkham, J A; Cooper, G S; Ford, S; Sarshar, M; Brandon, P S; Brown, F E; Oxman, R E and Young, B (1993) Information modelling in the construction industry: The information engineering approach. Construction Management and Economics, 11(5), pp. 384-397. ISSN 01446193

Apinayan, K.; Perera, B. A. K. S.; Weerasooriya, D. and Ranadewa, K. A. T. O. (2026) Adaptability of BIM technology for detailed cost estimation in Sri Lankan construction industry. Journal of Engineering, Design and Technology, 24(3), pp. 633-665. ISSN 1726-0531

Apu, N and Das, U (2020) Tectonics and earthquake potential of Bangladesh: A review. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 295-307. ISSN 1759-5916

Arakawa Martins, L; Soebarto, V; Williamson, T and Pisaniello, D (2022) Personal thermal comfort models: A deep learning approach for predicting older people's thermal preference. Smart and Sustainable Built Environment, 11(2), pp. 245-270. ISSN 2046-6099

Arditi, D; Sikangwan, P and Tokdemir, O B (2002) Scheduling system for high rise building construction. Construction Management and Economics, 20(4), pp. 353-364. ISSN 01446193

Arditi, D and Suh, K (1991) Estimating system selection expert. Construction Management and Economics, 9(4), pp. 369-381. ISSN 01446193

Arico, Manuela (2025) Application of scan-to-BIM approaches to HBIM digitisations in architectural heritage environment for documentation, management and conservation purposes. PhD thesis, Università degli Studi di Palermo, Italy.

Ariyachandra, M F (2021) Automating the generation of geometric information models to support digital twinning of existing rail infrastructure. PhD thesis, University of Cambridge, UK.

Armitage, P; Godoy-Shimizu, D; Steemers, K and Chenvidyakarn, T (2015) Using display energy certificates to quantify public sector office energy consumption. Building Research & Information, 43(6), pp. 691-709. ISSN 0961-3218

Arnold, J A (2000) Information interoperation for internet-based component engineering analysis. PhD thesis, Stanford University, USA.

Arowoiya, V A; Oke, A E; Aigbavboa, C O and Aliu, J (2020) An appraisal of the adoption internet of things (IoT) elements for sustainable construction. Journal of Engineering, Design and Technology, 18(5), pp. 1193-1208. ISSN 1726-0531

Arowoiya, V A; Oke, A E; Ojo, L D and Adelusi, A O (2024) Driving factors for the adoption of digital twin technology implementation for construction project performance in Nigeria. Journal of Construction Engineering and Management, 150(1): 05023014, ISSN 0733-9364

Artmann, N; Gyalistras, D; Manz, H and Heiselberg, P (2008) Impact of climate warming on passive night cooling potential. Building Research & Information, 36(2), pp. 111-128. ISSN 0961-3218

Asad, M M; Hassan, R B; Sherwani, F; Aamir, M; Soomro, Q M and Sohu, S (2019) Design and development of a novel knowledge-based decision support system for industrial safety management at drilling process: HAZFO Expert 1.0. Journal of Engineering, Design and Technology, 17(4), pp. 705-718. ISSN 1726-0531

Asad, M M; Hassan, R B; Sherwani, F; Rind, I A and Maiji, Y (2020) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation: A proposed framework. Journal of Engineering, Design and Technology, 18(5), pp. 959-971. ISSN 1726-0531

Asadi, R; Wilkinson, S and Rotimi, J O B (2021) Towards contracting strategy usage for rework in construction projects: A comprehensive review. Construction Management and Economics, 39(12), pp. 953-971. ISSN 01446193

Asare, E; Owusu-Manu, D G; Ayarkwa, J; Edwards, D J and Martek, I (2023) Thematic literature review of working capital management in the construction industry: Trends and research opportunities. Construction Innovation, 23(4), pp. 775-791. ISSN 1471-4175

Asare, S O; Fobiri, G and Bondinuba, F K (2025) Enhancing fairness, transparency and accountability during tendering under Ghana's procurement system: A systematic review. Built Environment Project and Asset Management, 15(1), pp. 33-50. ISSN 2044-124X

Asghari, V; Wang, Y; Biglari, A J; Hsu, S C and Tang, P (2022) Reinforcement learning in construction engineering and management: A review. Journal of Construction Engineering and Management, 148(11): 03122009, ISSN 0733-9364

Assaad, R; El-Adaway, I H and Abotaleb, I S (2020) Predicting project performance in the construction industry. Journal of Construction Engineering and Management, 146(5): 04020030, ISSN 0733-9364

Atasoy, G (2013) Visualizing and interacting with construction project performance information. PhD thesis, Carnegie Mellon University, USA.

Atkin, B L and Gill, E M (1986) Cad and management of construction projects. Journal of Construction Engineering and Management, 112(4), pp. 557-565. ISSN 0733-9364

Atuahene, B T; Kanjanabootra, S and Gajendran, T (2018) Towards an integrated framework of big data capabilities in the construction industry: A systematic literature review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Atuahene, B T; Kanjanabootra, S and Gajendran, T (2023) Transformative role of big data through enabling capability recognition in construction. Construction Management and Economics, 41(3), pp. 208-231. ISSN 01446193

Auchey, F L and Auchey, G J (2004) Picking successful projects by using the prism lltm model. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Avci, A B (2026) Machine learning-based prediction of thermal comfort: Exploring building types, climate, ventilation strategies, and seasonal variations. Building Research & Information, 54(1), pp. 100-117. ISSN 0961-3218

Awad, A and Fayek, A R (2013) Adaptive learning of contractor default prediction model for surety bonding. Journal of Construction Engineering and Management, 139(6), pp. 694-704. ISSN 0733-9364

Awad, A L S (2012) Intelligent contractor default prediction model for surety bonding in the construction industry. PhD thesis, University of Alberta, Canada.

Awolusi, I G and Marks, E D (2017) Safety activity analysis framework to evaluate safety performance in construction. Journal of Construction Engineering and Management, 143(3): 05016022, ISSN 0733-9364

Ayat, M; Ullah, M; Pervez, Z; Lawrence, J; Kang, C W and Ullah, A (2025) Analyzing the differential impact of variables on the success of solicited and unsolicited private participation in infrastructure projects using machine learning techniques. Engineering, Construction and Architectural Management, 32(12), pp. 7909-7937. ISSN 0969-9988

Ayat, M; Kim, B and Kang, C W (2023) A new data mining-based framework to predict the success of private participation in infrastructure projects. International Journal of Construction Management, 23(13), pp. 2151-2159. ISSN 1562-3599

Ayat, M; Ullah, A and Kang, C (2024) The unsolicited proposal and performance of private participation infrastructure projects in developing countries. Journal of Engineering, Design and Technology, 22(3), pp. 901-925. ISSN 1726-0531

Ayeni, Reuben Ebenmosi (2025) Intelligent project duration estimating system: An AI-based predictive approach for construction time estimation. PhD thesis, London South Bank University, UK.

Ayhan, M (2019) Development of dispute prediction and resolution method selection models for construction disputes. PhD thesis, Middle East Technical University, Turkey.

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Ayo-Odifiri, S O (2025) A systematic review of the applicability of nature-based solutions for resilient urban residences in southern Nigeria. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 344-362. ISSN 1759-5908

Azhar, S; Ahmad, I and Sein, M K (2010) Action research as a proactive research method for construction engineering and management. Journal of Construction Engineering and Management, 136(1), pp. 87-98. ISSN 0733-9364

Azimi, R (2011) An integrated real-time control system for structural steel fabrication projects. PhD thesis, University of Alberta, Canada.

Azimzadeh, F (2000) COSTEFF model: A computer-based knowledge source for improving cost effectiveness of engineering and construction projects. DEng thesis, Lamar University - Beaumont, USA.

Aziz, Hayder (2007) A methodology for the distributed and collaborative management of engineering knowledge. PhD thesis, Cranfield University, UK.

Aziz, Z; Anumba, C J and Peña-Mora, F (2010) Using context-aware wireless technologies to support teaching and learning in built environment. International Journal of Construction Education and Research, 6(1), pp. 18-29. ISSN 1557-8771

Azman, M A; Lee, B L; Rahman, R A and Ballesteros-Pérez, P (2026) Ownership and contracting specialization: Unlocking the productivity of construction firms in hybrid market economies. Construction Management and Economics, 44(1), pp. 61-78. ISSN 0144-6193

Azzouz, A and Hill, P (2017) How BIM is assessed using arup's BIM maturity measure? In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ağar, M (2024) A rule based expert system for delay analysis in construction projects. PhD thesis, Middle East Technical University, Turkey.

Babazadeh, N; Teizer, J; Bargstädt, H J and Melzner, J (2025) Predictive simulation of construction site noise emissions from heavy equipment. Smart and Sustainable Built Environment, 14(3), pp. 715-739. ISSN 2046-6099

Back, W E (1994) Quantifying benefits of electronic technology applied to bulk materials management. PhD thesis, Clemson University, USA.

Badawy, M; Hussein, A; Elseufy, S M and Alnaas, K (2021) How to predict the rebar labours' production rate by using ANN model. International Journal of Construction Management, 21(4), pp. 427-438. ISSN 1562-3599

Badran, Y (2020) Analysis of construction and stakeholder risks for Public Private Partnership projects in developing countries: a comparative analysis using Artificial Neural Networks to determine the effect of poor stakeholder management and construction risks on the project's schedule (PPP vs. traditional projects). PhD thesis, University of Salford, UK.

Bae, Y J (2016) Integrated design tool of building system optimization for building life cycle cost. PhD thesis, Purdue University, USA.

Bagheri-Zadeh, S H; Kim, H; Hounsell, S; Wood, C R; Soleymani, H and King, M (2007) Field study of concrete maturity methodology in cold weather. Journal of Construction Engineering and Management, 133(11), pp. 827-835. ISSN 0733-9364

Bahadir, M (2025) Predicting construction project durations in Europe using regression analysis methodology. DEngr thesis, George Washington University, USA.

Bahrami, S (2021) Product information quality: A sustainability challenge in design and construction. PhD thesis, Lund University, Sweden.

Bai, S; Li, M; Song, L and Kong, R (2021) Developing a common library of prefabricated structure components through graphic media mapping to improve design efficiency. Journal of Construction Engineering and Management, 147(1): 1954, ISSN 0733-9364

Bai, Y and Amirkhanian, S N (1994) Knowledge-based expert system for concrete mix design. Journal of Construction Engineering and Management, 120(2), pp. 357-373. ISSN 0733-9364

Baik, A H (2017) Heritage Building Information Modelling (HBIM) as a model of UNESCO's World Heritage Nomination File. PhD thesis, University College London, UK.

Bajar, K; Kamat, A; Shanker, S and Barve, A (2024) Blockchain technology: A catalyst for reverse logistics of the automobile industry. Smart and Sustainable Built Environment, 13(1), pp. 133-178. ISSN 2046-6099

Ballesteros-Pérez, P; González-Cruz, M C; Fuentes-Bargues, J L and Skitmore, M (2015) Analysis of the distribution of the number of bidders in construction contract auctions. Construction Management and Economics, 33(9), pp. 752-770. ISSN 01446193

Ballesteros-Pérez, P and Skitmore, M (2016) Estimating the number of new and repeated bidders in construction auctions. Construction Management and Economics, 34(12), pp. 919-934. ISSN 01446193

Ballesteros-Pérez, P; Skitmore, M; Cerezo-Narváez, A; González-Cruz, M C; Pastor-Fernández, A and Otero-Mateo, M (2021) Standard deviation of bids for construction contract auctions. Journal of Construction Engineering and Management, 147(8): 04021096, ISSN 0733-9364

Balloffet, A F (1992) Applications of decision support systems in water resources planning: The goal-setting stage. PhD thesis, Colorado State University, USA.

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Banerjee, A and Nayaka, R R (2022) A comprehensive overview on BIM-integrated cyber physical system architectures and practices in the architecture, engineering and construction industry. Construction Innovation, 22(4), pp. 727-748. ISSN 1471-4175

Banerjee, S (2022) Developing an organization-wide knowledge repository with intelligent knowledge transference to enhance construction project outcomes. PhD thesis, North Carolina State University, USA.

Bansal, V K and Pal, M (2011) Construction projects scheduling using GIS tools. International Journal of Construction Management, 11(1), pp. 1-18. ISSN 1562-3599

Banwo, O O (2022) Development of a framework for building cost information management in Nigeria. PhD thesis, Coventry University, UK.

Bapat, H; Sarkar, D and Gujar, R (2023) Application of multi-criteria decision making for evaluation of key performance indicators of integrated project delivery and BIM model for an infrastructure transportation project in Western India. International Journal of Construction Management, 23(12), pp. 2077-2086. ISSN 1562-3599

Baradan, S (2004) Comparative injury risk analysis of building trades. PhD thesis, Wayne State University, USA.

Barros, Natalia Nakamura (2024) Integrative model of life cycle assessment with internet of things, BIM and machine learning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Bashir, Muhammad Rizwan (2022) Big data management and analytics framework for IoT-enabled smart buildings. PhD thesis, University of Technology Sydney, Australia.

Bashirzadeh Tabrizi, Toktam (2019) Towards a simplified LCA tool: Minimising the life cycle environmental impact at the early stages of building design. PhD thesis, University of Sydney, Australia.

Basri, H (1994) An expert system for preliminary landfill design in developing countries. PhD thesis, University of Leeds, UK.

Bateman, G L (2021) A holistic model of emergency evacuations in large, complex, public occupancy buildings. PhD thesis, Imperial College London, UK.

Batouli, M and Joshi, D (2025) Pathways to socially sustainable adaptation: Real-time and context-specific vulnerability assessment in South carolina after hurricane dorian. Journal of Construction Engineering and Management, 151(2): 04024197, ISSN 0733-9364

Batra, S (2025) Exploring the application of PLS-SEM in construction management research: A bibliometric and meta-analysis approach. Engineering, Construction and Architectural Management, 32(4), pp. 2697-2727. ISSN 0969-9988

Batselier, J and Vanhoucke, M (2015) Empirical evaluation of earned value management forecasting accuracy for time and cost. Journal of Construction Engineering and Management, 141(11): 05015010, ISSN 0733-9364

Battikha, M (2000) A computer-based system for construction quality management with application to highway pavements. PhD thesis, University of British Columbia, Canada.

Bauch, G T (1999) A statistical project control tool for engineering managers. PhD thesis, University of Houston, USA.

Baxendale, A T (1992) Construction management information systems for production control. PhD thesis, Bristol Polytechnic, UK.

Bayar, M S (2019) BIM-enabled recommendations for digital handover process in the highways sector. PhD thesis, University of Salford, UK.

Bayhan, H G (2025) Transaction costs in construction project team communications: Language model and network science applications. PhD thesis, Michigan State University, USA.

Bazzan, J; Echeveste, M; Formoso, C T and Kowalski, J D S (2024) A data-driven customer complaint management model for residential building companies. Architectural Engineering and Design Management, 20(6), pp. 1381-1402. ISSN 1745-2007

Beaney, W D (2006) An examination of sectoral mobility in the UK labour force. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Becker, P E (2000) Modeling construction worker chemical exposures for compliance with OSHA permissible exposure limits: An investigation of lead exposures to highway bridge maintenance workers. DSc thesis, University of Massachusetts Lowell, USA.

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Belay, A M and Torp, O (2023) Construction cost performance under quality-gated framework: The cases of Norwegian road constructions. International Journal of Construction Management, 23(6), pp. 1030-1043. ISSN 1562-3599

Bello, A O; Olanrewaju, O I; Gbenga, P O; Khan, A A and Isa, R B (2025) Exploring the barriers to digital twin adoption in the Nigerian construction industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(5), pp. 1541-1572. ISSN 1726-0531

Bello, A O; Abdulraheem, A A; Agboola, S A and Afolabi, O P (2025) Factors influencing the adoption of distributed ledger technology in developing countries: An examination of Nigerian construction industry. International Journal of Construction Education and Research, 21(3), pp. 290-320. ISSN 1557-8771

Bello, M A (2012) Minimizing impediments to design for construction safety (DFCS) implementation on capital projects. PhD thesis, Carnegie Mellon University, USA.

Bender, M J (1996) A framework for collaborative planning and investigations of decision support tools for hydro development. PhD thesis, University of Manitoba, Canada.

Berglund-Brown, J; Dobie, I; Hewitt, J; De Wolf, C and Ochsendorf, J (2025) Lifetimes of demolished buildings in US and European cities. Buildings & Cities, 6(1), pp. 1099-1116. ISSN 2632-6655

Berry, S; Sharp, A; Hamilton, J and Killip, G (2014) Inspiring low-energy retrofits: The influence of open home events. Building Research & Information, 42(4), pp. 422-433. ISSN 0961-3218

Betts, M (1990) Methods and data used by large building contractors in preparing tenders. Construction Management and Economics, 8(4), pp. 399-414. ISSN 01446193

Betts, M (1991) Achieving and measuring flexibility in project information retrieval. Construction Management and Economics, 9(3), pp. 231-245. ISSN 01446193

Betts, M P (1987) Coordinated information retrieval for building contractors' tendering. PhD thesis, Polytechnic of the South Bank, UK.

Bhagwat, K and Delhi, V S K (2023) Review of construction safety performance measurement methods and practices: A science mapping approach. International Journal of Construction Management, 23(4), pp. 729-743. ISSN 1562-3599

Bhagwat, K and Venkata Santosh Kumar, D (2022) A systematic review of construction safety research: Quantitative and qualitative content analysis approach. Built Environment Project and Asset Management, 12(2), pp. 243-261. ISSN 2044-124X

Bhasha, A V and Reddy, B D V (2022) A multi-objective opposition-based barnacles mating optimization for image super resolution using hyper-spectral images. Journal of Engineering, Design and Technology, 20(6), pp. 1538-1564. ISSN 1726-0531

Bhatnagar, S; Jacob, G; Devkar, G; Rybkowski, Z K; Arefazar, Y and Obulam, R (2023) A systematic review of lean simulation games in the construction industry. Architectural Engineering and Design Management, 19(6), pp. 701-719. ISSN 1745-2007

Bilge, E C and Yaman, H (2021) Information management roles in real estate development lifecycle: Literature review on BIM and IPD framework. Construction Innovation, 21(4), pp. 723-742. ISSN 1471-4175

Bilge, E Ç and Yaman, H (2022) Research trends analysis using text mining in construction management: 2000–2020. Engineering, Construction and Architectural Management, 29(8), pp. 3210-3233. ISSN 0969-9988

Birgonul, M T; Dikmen, I and Demirel, T (2005) Decision support tool for the quantification of fault rates in construction fall accidents. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Birgonul, Z (2021) A receptive-responsive tool for customizing occupant's thermal comfort and maximizing energy efficiency by blending BIM data with real-time information. Smart and Sustainable Built Environment, 10(3), pp. 504-535. ISSN 2046-6099

Birkes, A Y (1999) Multimedia data definition and requirements for construction applications. PhD thesis, Georgia Institute of Technology, USA.

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Borg, R P; Borg Axisa, G; Ophiyandri, T and Hakam, A (2020) The development of inter-regional and intra-regional cooperation frameworks for multi-hazard early warning systems in South and South-East Asia. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 265-279. ISSN 1759-5916

Borja, Luis Claudio Alves (2019) Development of a quantitative method for predicting environmental aspects generated by construction sites. PhD thesis, Universidade Federal da Bahia, Brazil.

Bortey, L; Edwards, D J; Roberts, C and Rillie, I (2025) Unravelling incipient accidents: A machine learning prediction of incident risks in highway operations. Smart and Sustainable Built Environment, 14(6), pp. 1991-2022. ISSN 2046-6099

Bosher, L; Dainty, A; Carrillo, P; Glass, J and Price, A (2007) Integrating disaster risk management into construction: A UK perspective. Building Research & Information, 35(2), pp. 163-177. ISSN 0961-3218

Botti, A (2020) The development of an early stage design tool to assess the risk of overheating for UK residential buildings. PhD thesis, University of Surrey, UK.

Bouhmoud, H; Loudyi, D and Azhar, S (2024) Building information modeling (BIM) for lifecycle carbon emission: Scientometric and scoping literature reviews. Smart and Sustainable Built Environment, 13(6), pp. 1349-1369. ISSN 2046-6099

Boussabaine, A (1991) An expert system prototype for construction planning and productivity analysis. PhD thesis, University of Manchester, UK.

Boussabaine, A H and Duff, A R (1996) An expert-simulation system for construction productivity forecasting. Building Research & Information, 24(5), pp. 279-286. ISSN 0961-3218

Boussabaine, A H and Elhag, T M S (1999) Knowledge discovery in residential construction project cost data. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Bowen, P A and Edwards, P J (1985) Cost modelling and price forecasting: Practice and theory in perspective. Construction Management and Economics, 3(3), pp. 199-215. ISSN 01446193

Boyacioglu, S E; Greenwood, D; Rogage, K; Gledson, B; Parry, A and Hinds, M (2022) Developing an improved process model for forensic analysis of construction project delays. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Boyle, F and Thomson, C (2016) Establishing an evidence base for adapting social housing for an ageing population. Journal of Financial Management of Property and Construction, 21(2), pp. 137-159. ISSN 1366-4387

Boyle F, T C (2013) Housing an ageing population: Implications for managing the social housing stock. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bozorg Mehri, S.; Ghanbaripour, A. N.; Menadue, V. R. and Patching, A. (2026) From theory to practice of organizational project management maturity models: Systematic literature review. Built Environment Project and Asset Management, 16(2), pp. 263-285. ISSN 2044-124X

Bradley, A; Li, H; Qin, H; Xi, W; Peel, D and Nisbet, N (2022) Requirements and process analysis for ports and waterways openbim ISO standards development. Construction Innovation, 22(4), pp. 705-726. ISSN 1471-4175

Bradley, P E (2019) Methodology for the sequence analysis of building stocks. Building Research & Information, 47(2), pp. 141-155. ISSN 0961-3218

Brager, G and Baker, L (2009) Occupant satisfaction in mixed-mode buildings. Building Research & Information, 37(4), pp. 369-380. ISSN 0961-3218

Brandon, P S (1990) The development of an expert system for the strategic planning of construction projectss. Construction Management and Economics, 8(3), pp. 285-300. ISSN 01446193

Brandon, P S and Ribeiro, F L (1998) A knowledge-based system for assessing applications for house renovation grants. Construction Management and Economics, 16(1), pp. 57-69. ISSN 01446193

Brandín, R and Abrishami, S (2021) Information traceability platforms for asset data lifecycle: Blockchain-based technologies. Smart and Sustainable Built Environment, 10(3), pp. 364-386. ISSN 2046-6099

Bresnen, M and Marshall, N (2000) Building partnerships: Case studies of client-contractor collaboration in the UK construction industry. Construction Management and Economics, 18(7), pp. 819-832. ISSN 01446193

Bresnen, M J (1986) A study of forms of project organisation and matrix management: case studies from the construction industry. PhD thesis, University of Nottingham, UK.

Bright, K (1992) Computer assisted teaching system for the diagnosis of building defects. Construction Management and Economics, 10(3), pp. 203-226. ISSN 01446193

Brilakis, I and Soibelman, L (2006) Multimodal image retrieval from construction databases and model-based systems. Journal of Construction Engineering and Management, 132(7), pp. 777-785. ISSN 0733-9364

Broday, E E and Gameiro da Silva, M C (2023) The role of internet of things (IoT) in the assessment and communication of indoor environmental quality (IEQ) in buildings: A review. Smart and Sustainable Built Environment, 12(3), pp. 584-606. ISSN 2046-6099

Brown, C J (1985) A critical analysis of the application of management information systems in the civil engineering construction industry in South Africa. DBA thesis, University of Pretoria, South Africa.

Browning, F R (1994) Planning system for hazardous waste site characterization. PhD thesis, University of Missouri - Rolla, USA.

Bruce, R D (2008) A study of craft worker length of employment at select Missouri construction companies. PhD thesis, Indiana State University, USA.

Bruce, R D; Woolsey, R C and McCandless, D W (2009) A study of craft worker length of employment at select missouri construction companies. International Journal of Construction Education and Research, 5(1), pp. 3-11. ISSN 1557-8771

Bruhns, H and Wyatt, P (2011) A data framework for measuring the energy consumption of the non-domestic building stock. Building Research & Information, 39(3), pp. 211-226. ISSN 0961-3218

Bruno, Silvana (2019) The implementation of automatic diagnostics and monitoring towards diagnosis-aided historic building information modelling and management. PhD thesis, Politecnico di Bari, Italy.

Bröchner, J (2013) Construction patents and university-industry research interaction: An analysis of Nordic region data. Construction Innovation, 13(4), pp. 410-423. ISSN 1471-4175

Bubbers, G and Christian, J (1992) Hypertext and claim analysis. Journal of Construction Engineering and Management, 118(4), pp. 716-730. ISSN 0733-9364

Bui, Diep Thi (2018) Improving the decision-making process for demolition waste management in urban redevelopment projects in Vietnam. PhD thesis, Queensland University of Technology, Australia.

Burfoot, M; Naismith, N; GhaffarianHoseini, A and Ghaffarianhoseini, A (2023) Intelligent passive room acoustic technology to satisfy acoustic design standards in classrooms. Smart and Sustainable Built Environment, 12(5), pp. 1031-1055. ISSN 2046-6099

Bártolo, H M G and Bártolo, P J S (2003) Design reasoning. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Bélafi, Z D (2018) Analysis and modelling of occupant behaviour to support building design and performance optimisation. PhD thesis, Budapest University of Technology and Economics, Hungary.

Caetano, I.; Pinto, D.; Amândio, M.; Silva, J.; Sanhudo, L.; Azenha, M.; El Sibaii, M.; Granja, J.; Patrício, H.; Ganhão, F. and Poças Martins, J. (2026) Algorithmic workflow for digitising inspection data in railway tunnel maintenance. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Caldas, C H S (2003) Integration of project documents in model-based information systems. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Cammarano, S; Pellegrino, A; Lo Verso, V R M and Aghemo, C (2015) Assessment of daylight in rooms with different architectural features. Building Research & Information, 43(2), pp. 222-237. ISSN 0961-3218

Campbell, J M and Smith, S D (2007) Knowledge transfer of safety critical information by the internet. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Campbell, J M and Smith, S D (2007) Safety, hazard and risk identification and management in infrastructure management: A project overview. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Cao, W (2019) Data interpretation for infrastructure system diagnosis and prognosis based on model falsification. PhD thesis, National University of Singapore, Singapore.

Capano, C D (2007) Construction operations analysis for development of historical cost databases. PhD thesis, Marquette University, USA.

Carbonara, N and Pellegrino, R (2020) The role of public private partnerships in fostering innovation. Construction Management and Economics, 38(2), pp. 140-156. ISSN 01446193

Carbonari, G (2018) Sustainable facilities management with the support of building information modelling. PhD thesis, University of Greenwich, UK.

Carpenter, N (2014) Comparison of the design-bid-build and construction manager at risk project delivery methods utilized for the construction of public schools. PhD thesis, Clemson University, USA.

Carr, P G (2005) Investigation of bid price competition measured through prebid project estimates, actual bid prices, and number of bidders. Journal of Construction Engineering and Management, 131(11), pp. 1165-1172. ISSN 0733-9364

Casady, C B (2019) Assessing public-private partnership (PPP) governance, institutionalization, and market maturity in the United States and abroad. PhD thesis, Stanford University, USA.

Cassandro, J; Mirarchi, C; Gholamzadehmir, M and Pavan, A (2025) Advancements and prospects in building information modeling (BIM) for construction: A review. Engineering, Construction and Architectural Management, 32(9), pp. 6006-6026. ISSN 0969-9988

Cassandro, J; Mirarchi, C and Pavan, A (2025) A comprehensive literature review of 5D building information modelling using latent dirichlet allocation analysis. Construction Innovation, 25(7), pp. 331-357. ISSN 1471-4175

Castro, L; De Vecchi, R and Lamberts, R (2025) Design process for an occupant survey system to assess satisfaction with indoor environmental quality. Building Research & Information, 53(1-2), pp. 242-260. ISSN 0961-3218

Castro-Lacouture, D (2003) B2b e-work intranet solution design for rebar supply interactions. PhD thesis, Purdue University, USA.

Castán Broto, V; Westman, L and Huang, P (2023) How hegemonic discourses of sustainability influence urban climate action. Buildings & Cities, 4(1), pp. 973-989. ISSN 2632-6655

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Celik, T (1989) Improving concrete quality by using an expert system. PhD thesis, Loughborough University, UK.

Cesare, C M D and Ruddock, L (1997) Equity in property taxation: A model for establishing a fair property tax system. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Chambers, M L (2021) Fine particulate air pollution and accident risk: Three essays. PhD thesis, Vanderbilt University, USA.

Chan, A P C; Chan, M W; Oppong, G D; Adabre, M A; Darko, A and Liu, W (2025) Developing a project surveillance system to monitor and control building projects: The case of Hong Kong. International Journal of Construction Management, 25(16), pp. 1952-1967. ISSN 1562-3599

Chan, A P C (1995) Towards an expert system on project procurement. Journal of Construction Procurement, 1(2), pp. 111-123. ISSN 1358-9180

Chan, C M R and Harris, F C (1989) A database/spreadsheet application for equipment selection. Construction Management and Economics, 7(3), pp. 235-247. ISSN 01446193

Chan, E H W; Suen, H C H and Chan, S L (2005) An integrated project extranet design prototype: E-AEC for architects, engineers and contractors in Hong Kong and Mainland China. Journal of Construction Research, 6(2), pp. 253-271. ISSN 1609-9451

Chan, K C G (2012) The use of virtual reality for visualizing construction safety management process. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chan, T K (2019) Building and construction research in Malaysia: A bibliometric analysis. Journal of Construction in Developing Countries, 24(1), pp. 65-84. ISSN 1823-6499

Chan, Zenobia Tin Yan (2024) Alms and influence the dynamics of inducements and concessions in international politics. PhD thesis, Princeton University, USA.

Chandrasiri, A P and Geekiyanage, D (2018) Real-time object detection system for building energy conservation: An IP camera-based system. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Chang, H-H (2002) N-dimensional construction management information system (NDCON): System design and performance modeling through the zero -buffered project management philosophy. PhD thesis, Columbia University, USA.

Chang, H-P (2010) Relationships among supply chain management, strategic alliances, and organizational performance with implications for the construction industry. PhD thesis, Lynn University, USA.

Chang, T; Chi, S and Im, S B (2022) Understanding user experience and satisfaction with urban infrastructure through text mining of civil complaint data. Journal of Construction Engineering and Management, 148(8): 04022061, ISSN 0733-9364

Chang, T C; William, C and Crandall, K C (1990) Network resource allocation with support of a fuzzy expert system. Journal of Construction Engineering and Management, 116(2), pp. 239-260. ISSN 0733-9364

Chang, T-C (1987) Network resource allocation using an expert system with fuzzy logic reasoning. PhD thesis, University of California, Berkeley, USA.

Chao, L C (2010) Estimating project overheads rate in bidding: DSS approach using neural networks. Construction Management and Economics, 28(3), pp. 287-299. ISSN 1466433X

Chaphalkar, N B (2007) Expert system for resolution of delay claims in construction contracts. PhD thesis, Indian Institute of Technology Delhi, India.

Chapman, C (2023) Green and grey drainage infrastructure: costs and benefits of reducing surface water flood risk. PhD thesis, University of Oxford, UK.

Charles, H (2025) Beyond the building: Governance challenges in social housing retrofit. Buildings & Cities, 6(1), pp. 433-449. ISSN 2632-6655

Charles, S H; Chang-Richards, A Y and Yiu, T W (2022) A systematic review of factors affecting post-disaster reconstruction projects resilience. International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 113-132. ISSN 1759-5916

Charoenvisal, K (2013) A BIM interoperable web-based dss for vegetated roofing system selection. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Charuvil Elizabeth, R M; Sattari, F; Lefsrud, L and Gue, B (2025) Reducing serious injuries and fatalities in industrial construction-application of machine learning to analyze emotional intelligence and psychosocial factors. International Journal of Construction Management, 25(12), pp. 1404-1414. ISSN 1562-3599

Chau, A D (2018) Conceptual cost estimation decision support system in university construction projects. PhD thesis, University of Alabama, USA.

Che Wan Putra, C W F (1998) CAPE construction application protocol for data transfer: a building data model. PhD thesis, University of Salford, UK.

Checherita, C D (2009) A macroeconomic analysis of investment under public-private partnerships and its policy implications—the case of developing countries. PhD thesis, George Mason University, USA.

Chehayeb, N N (1996) Simulation-based project control. PhD thesis, University of Alberta, Canada.

Chehayeb, N N and AbouRizk, S M (1998) Simulation-based scheduling with continuous activity relationships. Journal of Construction Engineering and Management, 124(2), pp. 107-115. ISSN 0733-9364

Chellappa, V and Luximon, Y (2026) Computer-aided technologies for posture-based ergonomic risk assessment in construction: A systematic review. International Journal of Construction Management, 26(2), pp. 316-331. ISSN 1562-3599

Chellappa, V and Gunasekaran, A L (2022) Drivers for implementing design for safety in construction: A review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 39-49. ISSN 17514304

Chellappa, V; Srivastava, V and Salve, U R (2021) A systematic review of construction workers' health and safety research in India. Journal of Engineering, Design and Technology, 19(6), pp. 1488-1504. ISSN 1726-0531

Chen, J. H.; Shen, L. and Yu, T. (2026) Predicting manpower allocation for landscape construction projects using xgboost and shap. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Chen, J. H.; Shen, L. and Yu, T. (2026) Predicting manpower allocation for landscape construction projects using xgboost and shap. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Chen, J. H.; Su, M. C.; Lin, W. J.; Yu, T. and Wu, K. Y. (2026) Establishing smart system for building operation and maintenance using somcm algorithm. Engineering, Construction and Architectural Management, 33(5), pp. 3975-3995. ISSN 0969-9988

Chen, C (2007) Soft computing-based life-cycle cost analysis tools for transportation infrastructure management. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Chen, C (2015) A proactive approach for change management and control on construction projects. PhD thesis, University of California, Berkeley, USA.

Chen, C and Orr, R J (2009) Chinese contractors in Africa: Home government support, coordination mechanisms, and market entry strategies. Journal of Construction Engineering and Management, 135(11), pp. 1201-1210. ISSN 0733-9364

Chen, C; Zhang, Y; Xiao, B; Cheng, M; Zhang, J and Li, H (2024) Deep learning-based image steganography for visual data cybersecurity in construction management. Journal of Construction Engineering and Management, 150(10): 04024125, ISSN 0733-9364

Chen, F-C (2021) Deep learning studies for vision-based condition assessment and attribute estimation of civil infrastructure systems. PhD thesis, Purdue University, USA.

Chen, J-H (2003) Litigation prediction model for construction disputes caused by change orders. PhD thesis, University of Wisconsin - Madison, USA.

Chen, K; Loo, S C and Alias, A (2024) A bibliometric review of maturity model studies in the construction industry. Journal of Construction in Developing Countries, 29(2), pp. 129-145. ISSN 1823-6499

Chen, Kaiwen (2020) Analysis and management of UAV-captured images towards automation of building facade inspections. PhD thesis, Virginia Tech, USA.

Chen, L (2019) An integrated construction schedule risk analysis approach for infrastructure projects under uncertainty. PhD thesis, University of Hong Kong, Hong Kong.

Chen, L; Lu, Q and Zhao, X (2022) A semi-automatic image-based object recognition system for constructing as-is IFC BIM objects based on fuzzy-maut. International Journal of Construction Management, 22(1), pp. 51-65. ISSN 1562-3599

Chen, Q; Adey, B T; Haas, C and Hall, D M (2020) Using look-ahead plans to improve material flow processes on construction projects when using BIM and RFID technologies. Construction Innovation, 20(3), pp. 471-508. ISSN 1471-4175

Chen, Q; Adey, B T; Haas, C T and Hall, D M (2022) Exploiting digitalization for the coordination of required changes to improve engineer-to-order materials flow management. Construction Innovation, 22(1), pp. 76-100. ISSN 1471-4175

Chen, Q; Hall, D M; Adey, B T and Haas, C T (2021) Identifying enablers for coordination across construction supply chain processes: A systematic literature review. Engineering, Construction and Architectural Management, 28(4), pp. 1083-1113. ISSN 0969-9988

Chen, Q; Jin, Z; Xia, B; Wu, P and Skitmore, M (2016) Time and cost performance of design-build projects. Journal of Construction Engineering and Management, 142(2): 04015074, ISSN 0733-9364

Chen, S-M (2002) Intelligent scheduling model and multi-dimensional CM information system. PhD thesis, Columbia University, USA.

Chen, W; Hu, C; Zou, R; Yang, Q; Chen, Y; Xing, J and Mou, C (2025) Evolutionary method of digital twin model for building physics mechanism. Architectural Engineering and Design Management, 21(2), pp. 356-378. ISSN 1745-2007

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Chen, W-T (1994) Developing a knowledge-based expert system to determine contract duration for highway construction. PhD thesis, University of Florida, USA.

Chen, Xinyu (2025) Multimodal data fusion-based ergonomic assessment method for construction workers. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Chen, Y (2008) Using mobile computing for construction site information management. PhD thesis, University of Newcastle upon Tyne, UK.

Chen, Y; Cai, X; Li, J; Lin, P; Song, H; Liu, G; Cao, D and Ma, X (2023) The values and barriers of BIM implementation combination evaluation based on stakeholder theory: A study in China. Engineering, Construction and Architectural Management, 30(7), pp. 2814-2836. ISSN 0969-9988

Chen, Y and Ding, C (2024) Multidimensional evolutionary analysis of China's BIM technology policy based on quantitative mapping. Architectural Engineering and Design Management, 20(3), pp. 578-595. ISSN 1745-2007

Chen, Y J (2012) Strategic implications of e-business in the construction industry. PhD thesis, Loughborough University, UK.

Chen, Z; Li, T; Qin, L and Jiang, Y (2025) Vision-guided autonomous block loading in a dual-robot collaborative handling framework. Journal of Construction Engineering and Management, 151(5): 04025035, ISSN 0733-9364

Chenchu, M. K.; Ruikar, K. and Jha, K. N. (2026) A network-based framework for enhancing data integration and usage in highway infrastructure decision-making. Construction Innovation, 26(6), pp. 1911-1934. ISSN 1471-4175

Cheng, M Y; Vu, Q T and Aldo, A (2026) Automated BIM parametric design for optimal external wall tile planning. International Journal of Construction Management, 26(1), pp. 131-151. ISSN 1562-3599

Cheng, M Y; Vu, Q T and Wu, T C (2026) Highway bridge crack inspection verification and training using an automated augmented reality system. Journal of Construction Engineering and Management, 152(3): 04025279, ISSN 0733-9364

Cheng, J (2008) The impact of strategic decisions on construction client satisfaction: An assessment framework. PhD thesis, University of Wolverhampton, UK.

Cheng, J C P; Chen, K and Chen, W (2020) State-of-the-art review on mixed reality applications in the AECO industry. Journal of Construction Engineering and Management, 146(2): 03119009, ISSN 0733-9364

Cheng, J C P and Venkataraman, V (2016) Analyzing relationships between project team compositions and green building certification in green building projects. Built Environment Project and Asset Management, 6(5), pp. 449-461. ISSN 2044-124X

Cheng, L and Cao, D (2024) Evolution model and quantitative assessment of risk network in housing construction accidents. Engineering, Construction and Architectural Management, 31(1), pp. 227-246. ISSN 0969-9988

Cheng, M Y; Chang, Y H and Korir, D (2019) Novel approach to estimating schedule to completion in construction projects using sequence and nonsequence learning. Journal of Construction Engineering and Management, 145(11): 04019072, ISSN 0733-9364

Cheng, M Y and O'Connor, J T (1996) Arcsite: Enhanced GIS for construction site layout. Journal of Construction Engineering and Management, 122(4), pp. 329-336. ISSN 0733-9364

Cheng, M-Y (1992) Automated site layout of temporary construction facilities using geographic information systems (GIS). PhD thesis, University of Texas at Austin, USA.

Cheng, Y (2005) Development of bridge management systems using fuzzy case-based reasoning. PhD thesis, Kansas State University, USA.

Cheng, Z; Ke, Y; Yang, Z; Cai, J and Wang, H (2020) Diversification or convergence: An international comparison of PPP policy and management between the UK, India, and China. Engineering, Construction and Architectural Management, 27(6), pp. 1315-1335. ISSN 0969-9988

Cherneff, J M (1990) Knowledge-based interpretation of architectural drawings. PhD thesis, Massachusetts Institute of Technology, USA.

Cheung, S O; Tam, C M; Tam, V; Cheung, K and Suen, H (2004) A web-based performance assessment system for environmental protection: Wepass. Construction Management and Economics, 22(9), pp. 927-935. ISSN 01446193

Chevallier, N J and Russell, A D (2001) Developing a draft schedule using templates and rules. Journal of Construction Engineering and Management, 127(5), pp. 391-398. ISSN 0733-9364

Chin, S (1997) An integrated life-cycle information framework for construction project management. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Ching-Lung, F (2024) Using convolutional neural networks to identify illegal roofs from unmanned aerial vehicle images. Architectural Engineering and Design Management, 20(2), pp. 390-410. ISSN 1745-2007

Chinyio, E A; Olomolaiye, P O; Kometa, S T and Harris, F C (1998) A needs-based methodology for classifying construction clients and selecting contractors. Construction Management and Economics, 16(1), pp. 91-98. ISSN 01446193

Chiwuzie, A; Dabara, D I; Omotehinshe, O J; Prince, E M and Aiyepada, E G (2021) Changing macroeconomic indicators and the rental values of residential properties in Ede Nigeria. African Journal of Built Environment Research, 5(1), pp. 1-18. ISSN 2414-0236

Cho, M (1994) Productivity analysis in construction using an expert system approach. PhD thesis, University of Manchester, UK.

Cho, Sung Eun (2025) Machine learning approaches for improving construction materials and pavement systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Cho, Y-K (2000) Human-assisted rapid workspace modeling for construction equipment operations. PhD thesis, University of Texas at Austin, USA.

Choe, Sooyoung (2015) 4-dimensional process-aware site-specific construction safety planning. PhD thesis, University of Texas at Austin, USA.

Choi, H H and Mahadevan, S (2008) Construction project risk assessment using existing database and project-specific information. Journal of Construction Engineering and Management, 134(11), pp. 894-903. ISSN 0733-9364

Choi, K C (1992) An object-oriented historical cost information base to support concurrent engineering. PhD thesis, University of California, Berkeley, USA.

Chomicka, B A (2013) Drivers and cost implications of quality failures in commercial offices. PhD thesis, Glasgow Caledonian University, UK.

Chong, H Y; Zin, R M and Chong, S C (2013) Employing data warehousing for contract administration: E-dispute resolution prototype. Journal of Construction Engineering and Management, 139(6), pp. 611-619. ISSN 0733-9364

Chong, W-h B (2016) A process-data supported input-output framework for delineating the embodied emissions of Hong Kong construction industry. PhD thesis, University of Hong Kong, Hong Kong.

Choo, H J; Tommelein, I D; Ballard, G and Zabelle, T R (1999) Workplan: Constraint-based database for work package scheduling. Journal of Construction Engineering and Management, 125(3), pp. 151-160. ISSN 0733-9364

Chou, J-S (2005) Item-level quantity-based preliminary cost estimating system for highway earthwork, landscape, subgrade treatments, base, surface courses, pavement and traffic control. PhD thesis, University of Texas at Austin, USA.

Choudhary, K; Sangwa, N R and Sangwan, K S (2025) Comparative life cycle assessment of flooring options for sustainable buildings. Construction Innovation, 25(4), pp. 1108-1126. ISSN 1471-4175

Chouhan, S; Narang, A and Mukherjee, M (2024) Multihazard risk assessment of educational institutes of dehradun, uttarakhand. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 45-58. ISSN 1759-5916

Christian, J (2002) An overview of systems utilizing information and communication technologies: Five research case studies. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Christian, J and Hachey, D (1995) Effects of delay times on production rates in construction. Journal of Construction Engineering and Management, 121(1), pp. 20-26. ISSN 0733-9364

Christodoulou, S E (1998) Optimum bid markup calculation in competitive bidding environments using fuzzy artificial neural networks. PhD thesis, Columbia University, USA.

Chua, D K H and Goh, Y M (2004) Incident causation model for improving feedback of safety knowledge. Journal of Construction Engineering and Management, 130(4), pp. 542-551. ISSN 0733-9364

Chua, D K H; Tyagi, A; Ling, S and Bok, S H (2003) Process-parameter-interface model for design management. Journal of Construction Engineering and Management, 129(6), pp. 653-663. ISSN 0733-9364

Chung, K H Y (2022) Data fusion, hedonic pricing, and blockchains: Lowering investment barriers for sustainable infrastructure. PhD thesis, University of Michigan, USA.

Chung, S (2024) Potential issue identification for country risks in international construction projects from news articles. PhD thesis, Seoul National University, Republic of Korea.

Cole, R J and Valdebenito, M J (2013) The importation of building environmental certification systems: International usages of BREEAM and LEED. Building Research & Information, 41(6), pp. 662-676. ISSN 0961-3218

Colenberg, S; Jylhä, T and Arkesteijn, M (2021) The relationship between interior office space and employee health and well-being: A literature review. Building Research & Information, 49(3), pp. 352-366. ISSN 0961-3218

Colin, J and Vanhoucke, M (2016) Empirical perspective on activity durations for project-management simulation studies. Journal of Construction Engineering and Management, 142(1): 04015047, ISSN 0733-9364

Colley, J G (2011) An exploration of competitive advantage in the plasterboard industry. PhD thesis, University of Nottingham, UK.

Comiskey, D; McKane, M; Jaffrey, A; Wilson, P and Mordue, S (2017) An analysis of data sharing platforms in multidisciplinary education. Architectural Engineering and Design Management, 13(4), pp. 244-261. ISSN 1745-2007

Conradie, D; van Reenen, T and Bole, S (2018) Degree-day building energy reference map for South Africa. Building Research & Information, 46(2), pp. 191-16. ISSN 0961-3218

Cooke, T and Lingard, H (2011) A retrospective analysis of work-related deaths in the Australian construction industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Cooke, T; Lingard, H; Blismas, N and Stranieri, A (2008) ToolSHeD™: The development and evaluation of a decision support tool for health and safety in construction design. Engineering, Construction and Architectural Management, 15(4), pp. 336-351. ISSN 0969-9988

Cooke-Davies, T J (2000) Towards improved project management practice: uncovering the evidence for effective practices through empirical research. PhD thesis, Leeds Beckett University, UK.

Cooper, T E (1994) A knowledge-based construction claims advisor for the A.I.A. A201 general conditions document. PhD thesis, Auburn University, USA.

Costa, S; Carvalho, M S; Pimentel, C and Duarte, C (2023) A systematic literature review and conceptual framework of construction industrialization. Journal of Construction Engineering and Management, 149(2): 3122013, ISSN 0733-9364

Craig, N; Sommerville, J and Auchterlounie, T (2010) Customer satisfaction and snagging in the UK private house building sector. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Crawford, P and Vogl, B (2006) Measuring productivity in the construction industry. Building Research & Information, 34(3), pp. 208-219. ISSN 0961-3218

Crippa, J; Araujo, A M F; Bem, D; Ugaya, C M L and Scheer, S (2020) A systematic review of BIM usage for life cycle impact assessment. Built Environment Project and Asset Management, 10(4), pp. 603-618. ISSN 2044-124X

Crowley, A J (1998) The development & implementation of a product model for constructional steelwork. PhD thesis, University of Leeds, UK.

Cruz, C O and Marques, R C (2013) Exogenous determinants for renegotiating public infrastructure concessions: Evidence from Portugal. Journal of Construction Engineering and Management, 139(9), pp. 1082-1090. ISSN 0733-9364

Cui, L Z; Liu, J; Luo, H; Wang, J; Zhang, X; Lv, G and Xie, Q (2024) Deformation measurement of tunnel shotcrete liner using the multiepoch lidar point clouds. Journal of Construction Engineering and Management, 150(6): 04024049, ISSN 0733-9364

Cui, X (2002) Delay time modelling and software development. PhD thesis, University of Salford, UK.

Cusumano, L; Farmakis, O; Granath, M; Olsson, N; Jockwer, R and Rempling, R (2025) Current benefits and future possibilities with digital field reporting. International Journal of Construction Management, 25(5), pp. 572-583. ISSN 1562-3599

Dabash, M S (2022) Applications of computer vision to improve construction site safety and monitoring. PhD thesis, University of Delaware, USA.

Daegu, C (2009) Construction information database framework (CIDF) for integrated cost, schedule, and performance control. PhD thesis, University of Wisconsin - Madison, USA.

Dahanayake, B; Ramachandra, T and Thurairajah, N (2016) Assessment on rework costs probability of housing projects in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Dakas, A I I (2014) Management of project stakeholders: facilitating project success in public sector projects in Nigeria. PhD thesis, University of Leeds, UK.

Dakhil, A J (2017) Building information modelling (BIM) maturity-benefits assessment relationship framework for UK construction clients. PhD thesis, University of Salford, UK.

Dalton, M (2008) A risk breakdown structure for public sector construction projects. PhD thesis, University of Manchester, UK.

Damirchilo, F (2021) Use of machine learning and data science on infrastructure transportation and construction projects. PhD thesis, Arizona State University, USA.

Daneshfar, M (2024) Integration of geospatial and environmental data to support building renovation. PhD thesis, Technische Universitaet Berlin, Germany.

Dangana, S (2015) A decision support framework for selecting innovative sustainable technologies for delivering low carbon retail buildings. PhD thesis, University of Plymouth, UK.

Daniel, C and Neufville, E K (2025) An autogluon-enabled robust machine learning model for concrete tensile and compressive strength forecast. International Journal of Construction Management, 25(13), pp. 1636-1647. ISSN 1562-3599

Daniel, E I and Oshodi, O (2023) Lean-offsite-simulation nexus for housing construction: A state-of-the-art review of the existing knowledge. Construction Innovation, 23(5), pp. 994-1017. ISSN 1471-4175

Danso, F O; Badu, E; Ahadzie, D K and Manu, P (2015) Health and safety issues and mitigation measures relating to adaptive-retrofits projects: Literature review and research implications for the Ghanaian construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Dardouri, S; BuHamdan, S; Al Balkhy, W; Dakhli, Z; Danel, T and Lafhaj, Z (2023) RFID platform for construction materials management. International Journal of Construction Management, 23(14), pp. 2509-2519. ISSN 1562-3599

Das, M; Cheng, J C P and Law, K H (2015) An ontology-based web service framework for construction supply chain collaboration and management. Engineering, Construction and Architectural Management, 22(5), pp. 551-572. ISSN 0969-9988

Das, P; Perera, S; Senaratne, S and Osei-Kyei, R (2023) Paving the way for industry 4.0 maturity of construction enterprises: A state of the art review. Engineering, Construction and Architectural Management, 30(10), pp. 4665-4694. ISSN 0969-9988

Das, P; Perera, S; Senaratne, S and Osei-Kyei, R (2025) A smart modern construction enterprise maturity model for business scenarios leading to industry 4.0. Smart and Sustainable Built Environment, 14(1), pp. 23-49. ISSN 2046-6099

Das, P K (2006) A sustainability impact-assessment tool for selected building technologies in rural India: the case of the Andhra Pradesh primary education project. PhD thesis, University of Newcastle upon Tyne, UK.

Dauber, V F (2003) Measuring and minimising waste in construction by applying lean thinking. PhD thesis, University of Dundee, UK.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology, 18(5), pp. 1269-1285. ISSN 1726-0531

Davis, K (2016) Reconciling views of project success: a multiple stakeholder model. PhD thesis, Kingston University, UK.

Dawood, N N (1995) An integrated bidding management expert system for the make-to-order precast industry. Construction Management and Economics, 13(2), pp. 115-125. ISSN 01446193

De Araujo, V (2023) Timber construction as a multiple valuable sustainable alternative: Main characteristics, challenge remarks and affirmative actions. International Journal of Construction Management, 23(8), pp. 1334-1343. ISSN 1562-3599

De Biasio, A and Murray, A (2017) The social network of the UK PPP secondary equity market: Returns and competition in an emerging market. Construction Management and Economics, 35(8-9), pp. 468-481. ISSN 0144-6193

De Cicco, S (2004) Design and development of an information management system for highway construction specifications. PhD thesis, University of Wisconsin - Madison, USA.

De La Garza, J M and Mitropoulos, P (1991) Technology-transfer (t2) model for expert systems. Journal of Construction Engineering and Management, 117(4), pp. 736-755. ISSN 0733-9364

De La Garza, J M and Mitropoulos, P (1992) Flavors and mixins of expert systems technology transfer model for AEC industry. Journal of Construction Engineering and Management, 118(3), pp. 435-453. ISSN 0733-9364

De Marco, A; Narbaev, T; Ottaviani, F M and Vanhoucke, M (2024) Influence of cost contingency management on project estimates at completion. International Journal of Construction Management, 24(9), pp. 935-945. ISSN 1562-3599

Decarolis, F (2009) When the highest bidder loses the auction: Theory and evidence from public procurement. PhD thesis, University of Chicago, USA.

Deep, S (2021) Influence of ‘power’ and ‘dependence’ attributes on main contractor and sub-contractor collaboration in construction projects. PhD thesis, University of Newcastle, Australia.

Deep, S; Gajendran, T and Jefferies, M (2023) Antecedents of "power" and "dependence" in the context of collaborations in construction projects: A systematic literature review. Construction Innovation, 23(5), pp. 1279-1299. ISSN 1471-4175

Delgado, J M D; Oyedele, L; Bilal, M; Ajayi, A; Akanbi, L and Akinade, O (2020) Big data analytics system for costing power transmission projects. Journal of Construction Engineering and Management, 146(1): 05019017, ISSN 0733-9364

Delghust, M; Roelens, W; Tanghe, T; De Weerdt, Y and Janssens, A (2015) Regulatory energy calculations versus real energy use in high-performance houses. Building Research & Information, 43(6), pp. 675-690. ISSN 0961-3218

Delwar, M (1998) A generic LCCA algorithm for pavement management decisions. PhD thesis, Washington State University, USA.

Demirel, H C (2022) Dealing with uncertainty in infrastructure public-private partnership projects. PhD thesis, Delft University of Technology, Netherlands.

Deng, H; Hong, H; Luo, D; Deng, Y and Su, C (2020) Automatic indoor construction process monitoring for tiles based on BIM and computer vision. Journal of Construction Engineering and Management, 146(1): 04019095, ISSN 0733-9364

Deng, Y (2015) Mapping of BIM and GIS for interoperable geospatial data management and analysis for the built environment. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Deng, Y and Poon, S W (2013) Meeting sustainability challenges of mega-event flagships. Engineering, Construction and Architectural Management, 20(1), pp. 46-62. ISSN 0969-9988

Derakhshanfar, Hossein (2021) A delay risk management framework for construction projects: Learning from past experiences. PhD thesis, University of South Australia, Australia.

Dewan, S and Singh, L (2020) Use of blockchain in designing smart city. Smart and Sustainable Built Environment, 9(4), pp. 695-709. ISSN 2046-6099

Dhawan, K (2023) Supply chain management driven logistics efficiency in the New Zealand construction sector. PhD thesis, Auckland University of Technology, New Zealand.

Diaz Schery, C. A.; Caiado, R. G. G.; Ivson, P.; Santos, R. S. and Thadeu Corseuil, E. (2026) An integrative framework for BIM, digital twin and generative AI convergence in construction: A multi-dimensional analysis of synergies and enabling factors. Smart and Sustainable Built Environment, pp. 1-39. ISSN 2046-6099

Dib, H; Adamo-Villani, N and Issa, R R A (2013) A GIS-based visual information model for buildng construction project management. International Journal of Construction Management, 13(1), pp. 1-18. ISSN 1562-3599

Dib, H Y (2006) Visual information access and management for life cycle project management. PhD thesis, University of Florida, USA.

Diekmann, J E and Kim, M P (1992) Superchange: Expert system for analysis of changes claims. Journal of Construction Engineering and Management, 118(2), pp. 399-411. ISSN 0733-9364

Diekmann, J E and Kraiem, Z (1988) Explanation of construction engineering knowledge in expert systems. Journal of Construction Engineering and Management, 114(3), pp. 364-389. ISSN 0733-9364

Dikmen, I; Birgonul, M T and Arikan, A E (2004) A critical review of risk management support tools. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Ding, S; Hu, H; Chai, Z and Wang, W (2024) Secure and formalized blockchain-IPFS information sharing in precast construction from the whole supply chain perspective. Journal of Construction Engineering and Management, 150(1): 04023150, ISSN 0733-9364

Ding, Z; Jiang, S; Ng, F and Zhu, M (2017) A new TRIZ-based patent knowledge management system for construction technology innovation. Journal of Engineering, Design and Technology, 15(4), pp. 456-470.

Dinh, T H; Dinh, T H and Götze, U (2024) Roadworks design: Study on selection of construction materials in the preliminary design phase based on economic performance. International Journal of Construction Management, 24(5), pp. 503-511. ISSN 1562-3599

Dioguardi, G (1983) Macrofirms: Construction firms for the computer age. Journal of Construction Engineering and Management, 109(1), pp. 13-24. ISSN 0733-9364

Dixit, A; Chauhan, R and Shaw, R (2025) Application of smart systems and emerging technologies for disaster risk reduction and management in Nepal. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 328-343. ISSN 1759-5908

Djebbar, K E B; Salem, S and Mokhtari, A (2020) Assessment of energy performance using bottom-up method: Exemplified by multi-storey buildings in Tlemcen (Algeria). International Journal of Building Pathology and Adaptation, 38(1), pp. 192-216. ISSN 23984708

Doan, D T; Mai, T P A; GhaffarianHoseini, A; GhaffarianHoseini, A and Naismith, N (2025) A review of the current state and future trends in modern methods of construction research. Construction Innovation, 25(6), pp. 1821-1839. ISSN 1471-4175

Dobrucali, E; Sadikoglu, E; Demirkesen, S; Zhang, C; Tezel, A and Kiral, I A (2024) A bibliometric analysis of digital technologies use in construction health and safety. Engineering, Construction and Architectural Management, 31(8), pp. 3249-3282. ISSN 0969-9988

Donato, V; Lo Turco, M and Bocconcino, M M (2018) BIM-QA/QC in the architectural design process. Architectural Engineering and Design Management, 14(3), pp. 239-254. ISSN 1745-2007

Donyavi, S; Flanagan, R; Assadi-Langroudi, A and Parisi, L (2024) Understanding the complexity of materials procurement in construction projects to build a conceptual framework influencing supply chain management of msmes. International Journal of Construction Management, 24(2), pp. 177-186. ISSN 1562-3599

Dorignon, L; Oswald, D; Kempton, L; Boehme, T; Iyer-Raniga, U; Moore, T and Dalton, T (2024) Investigating residential building materials in a circular economy: An Australian perspective. Journal of Construction Engineering and Management, 150(9): 04024115, ISSN 0733-9364

Dou, Y; Li, T; Li, L; Zhang, Y and Li, Z (2023) Tracking the research on ten emerging digital technologies in the AECO industry. Journal of Construction Engineering and Management, 149(3): 03123003, ISSN 0733-9364

Dowsett, R M; Green, M S and Harty, C F (2022) Speculation beyond technology: Building scenarios through storytelling. Buildings & Cities, 3(1), pp. 534-553. ISSN 2632-6655

Du, X.; Liu, J.; Chen, Y. and Wang, Z. (2026) Millennial executives: Effects of the age-inverse relationship in ceo-top management team on corporate misconduct in China's construction industry. Engineering, Construction and Architectural Management, 33(3), pp. 2448-2470. ISSN 0969-9988

Du, J; Liu, R and Issa, R R A (2014) BIM cloud score: Benchmarking BIM performance. Journal of Construction Engineering and Management, 140(11): 4014054, ISSN 0733-9364

DuBois, P J (1996) An efficient method to accurately predict general condition costs in the building construction industry. PhD thesis, Colorado School of Mines, USA.

Duanshun, Li (2018) Towards fully integrated and automated construction planning on earthworks projects. PhD thesis, University of Alberta, Canada.

Dudhee, V and Vukovic, V (2023) Building information model visualisation in augmented reality. Smart and Sustainable Built Environment, 12(4), pp. 919-934. ISSN 2046-6099

Dunlop, P G (2005) Investigation, modelling and planning of stochastic concrete placing operations. PhD thesis, University of Edinburgh, UK.

Dursun, O and Stoy, C (2011) Time-cost relationship of building projects: Statistical adequacy of categorization with respect to project location. Construction Management and Economics, 29(1), pp. 97-106. ISSN 1466433X

Dutta, A (2020) An in-depth investigation of the effects of work-related factors on the development of knee musculoskeletal disorders among construction roofers. PhD thesis, West Virginia University, USA.

Duvel, C S (1999) Establishing rule-based models to implement workflow within construction organizations. PhD thesis, University of Florida, USA.

Dykes, C and Baird, G (2014) Performance benchmarks for non-domestic buildings: Towards user perception benchmarks. Building Research & Information, 42(1), pp. 62-71. ISSN 0961-3218

Eadie, R; Millar, P and Grant, R (2013) PFI/PPP, private sector perspectives of UK transport and healthcare. Built Environment Project and Asset Management, 3(1), pp. 89-104. ISSN 2044-124X

Ebekozien, A; Abdul-Aziz, A R and Jaafar, M (2021) Low-cost housing policies and squatters struggles in Nigeria: The Nigerian perspective on possible solutions. International Journal of Construction Management, 21(11), pp. 1088-1098. ISSN 1562-3599

Edirisinghe, R and Gunathilake, L (2025) IoT-based smart vest for heat stress management in construction. International Journal of Construction Management, 25(16), pp. 2137-2149. ISSN 1562-3599

Edward Back, W and Bell, L C (1995) Quantifying process benefits of electronic data management technologies. Journal of Construction Engineering and Management, 121(4), pp. 415-421. ISSN 0733-9364

Edwards, D J and Nicholas, J (2001) Telescopic handler machine park prediction using sales trends. Journal of Financial Management of Property and Construction, 6(2), pp. 109-118. ISSN 1366-4387

Egbelakin, T; Omotayo, T; Ogunmakinde, O E and Ekundayo, D (2025) Eliciting social themes of flood mitigation and community engagement studies through text mining. International Journal of Building Pathology and Adaptation, 43(1), pp. 29-49. ISSN 2398-4708

Egbu, C O; Young, B A and Torrance, V B (1998) Planning and control processes and techniques for refurbishment management. Construction Management and Economics, 16(3), pp. 315-325. ISSN 01446193

Ehwi, R J; Oti-Sarpong, K; Shojaei, R and Burgess, G (2022) Offsite manufacturing research: A systematic review of methodologies used. Construction Management and Economics, 40(1), pp. 1-24. ISSN 01446193

Eisenstein, W; Fuertes, G; Kaam, S; Seigel, K; Arens, E and Mozingo, L (2017) Climate co-benefits of green building standards: Water, waste and transportation. Building Research & Information, 45(8), pp. 828-844. ISSN 0961-3218

Eisma, P and Volker, L (2014) Exploring the field of public construction clients by a graphical network analysis. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Ekanayake, E; Shen, G Q and Kumaraswamy, M (2021) Supply chain resilience: Mapping the knowledge domains through a bibliometric approach. Built Environment Project and Asset Management, 11(4), pp. 705-721. ISSN 2044-124X

Eken, G (2022) Using natural language processing for automated construction contract review during risk assessment at the bidding stage. PhD thesis, Middle East Technical University, Turkey.

Ekung, S; Odesola, I and Oladokun, M (2022) Dimensions of cost misperceptions obstructing the adoption of sustainable buildings. Smart and Sustainable Built Environment, 11(4), pp. 852-869. ISSN 2046-6099

El Ghandour, W (2007) Integrated information-based construction simulation system. PhD thesis, University of Alberta, Canada.

El Ghandour, Wael (2007) Integrated information-based construction simulation system (iicss). PhD thesis, University of Alberta, Canada.

El Samaty, H S (2025) Readiness of urban design projects for integration with big data. Case study: Humanizing neighborhoods initiative–KSA. Smart and Sustainable Built Environment, 14(4), pp. 943-959. ISSN 2046-6099

El Samaty, H S (2025) Readiness of urban design projects for integration with big data. Case study: Humanizing neighborhoods initiative—KSA. Smart and Sustainable Built Environment, 14(4), pp. 943-959. ISSN 2046-6099

El Tayeh, A (2008) Social web-based systems for supporting geographically dispersed project teams in the architecture-engineering-construction industry. PhD thesis, University of Manchester, UK.

El-Adaway, I H; Ali, G; Assaad, R; Elsayegh, A and Abotaleb, I S (2019) Analytic overview of citation metrics in the civil engineering domain with focus on construction engineering and management specialty area and its subdisciplines. Journal of Construction Engineering and Management, 145(10): 04019060, ISSN 0733-9364

El-Gohary, K M; Aziz, R F and Abdel-Khalek, H A (2017) Engineering approach using ANN to improve and predict construction labor productivity under different influences. Journal of Construction Engineering and Management, 143(8): 04017045, ISSN 0733-9364

El-Medany, W M; Al-Omary, A; Al-Hakim, R and Nusaif, M (2014) Low cost real-time tracking system prototype using gm862 cellular quad band module. Journal of Engineering, Design and Technology, 12(3), pp. 389-407.

El-Omari, S (2008) Automated data acquisition for tracking and control of construction projects. PhD thesis, Concordia University, Canada.

El-Omari, S and Moselhi, O (2009) Data acquisition from construction sites for tracking purposes. Engineering, Construction and Architectural Management, 16(5), pp. 490-503. ISSN 0969-9988

El-Rayes, K and Moselhi, O (2001) Impact of rainfall on the productivity of highway construction. Journal of Construction Engineering and Management, 127(2), pp. 125-131. ISSN 0733-9364

El-Rayes, K; Ramanathan, R and Moselhi, O (2002) An object-oriented model for planning and control of housing construction. Construction Management and Economics, 20(3), pp. 201-210. ISSN 01446193

El-Sayegh, S M (1998) Linear construction planning model (LCPM): A new model for planning, and scheduling linear construction projects. PhD thesis, Texas A&M University, USA.

ElAlem, M A; Mahdi, I M; Mohamadien, H A and Hosny, S (2025) Forecasting scope creep in Egyptian construction projects: An evaluation using artificial neural network (ANN) and random forest models. International Journal of Construction Management, 25(16), pp. 2082-2101. ISSN 1562-3599

Elbarkouky, M M G (2010) A fuzzy consensus building framework for early alignment of construction project teams on the extent of their roles and responsibilities. PhD thesis, University of Alberta, Canada.

Elbarkouky, M M G and Fayek, A R (2011) Fuzzy similarity consensus model for early alignment of construction project teams on the extent of their roles and responsibilities. Journal of Construction Engineering and Management, 137(6), pp. 432-440. ISSN 0733-9364

Elbarkouky, M M G and Robinson Fayek, A (2011) Fuzzy preference relations consensus approach to reduce conflicts on shared responsibilities in the owner managing contractor delivery system. Journal of Construction Engineering and Management, 137(8), pp. 609-618. ISSN 0733-9364

Elbashbishy, T S; Ali, G G and El-adaway, I H (2022) Blockchain technology in the construction industry: Mapping current research trends using social network analysis and clustering. Construction Management and Economics, 40(5), pp. 406-427. ISSN 01446193

Eldin, N N and Mayfield, J (2005) Determination of most economical scrapers fleet. Journal of Construction Engineering and Management, 131(10), pp. 1109-1114. ISSN 0733-9364

Elghaish, F; Matarneh, S; Abdellatef, E; Rahimian, F; Hosseini, M R and Farouk Kineber, A (2025) Multi-layers deep learning model with feature selection for automated detection and classification of highway pavement cracks. Smart and Sustainable Built Environment, 14(2), pp. 511-535. ISSN 2046-6099

Elghaish, F A K (2020) An automated IPD cost management system: BIM and blockchain based solution. PhD thesis, University of Portsmouth, UK.

Elhag, T M S (2004) Tender price modelling: artificial neural networks and regression techniques. PhD thesis, University of Liverpool, UK.

Elhag, T M S and Boussabaine, A H (1998) An artificial neural system for cost estimation of construction projects. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Elhag, T M S and Boussabaine, A H (2001) Tender price estimation using artificial neural networks. Journal of Financial Management of Property and Construction, 6(3), pp. 193-208. ISSN 1366-4387

Elkhatib, M M (1995) Developing an integrated highway information system for safety management using GIS. PhD thesis, Wayne State University, USA.

Elkhayat, Y.; Moran, P.; Barrett, S.; Barry, P. and Goggins, J. (2026) Developing a methodology with a tool for calculating and reducing the upfront carbon emissions of buildings: Ireland as a case study. Architectural Engineering and Design Management, 22(1), pp. 168-187. ISSN 1745-2007

Elmousalami, H H (2020) Artificial intelligence and parametric construction cost estimate modeling: State-of-the-art review. Journal of Construction Engineering and Management, 146(1): 03119008, ISSN 0733-9364

Elnaas, E (2014) The decision to use off-site manufacturing systems for house-building projects in the UK. PhD thesis, University of Brighton, UK.

Elrod, M T (2017) A novel approach to determining real-time risk probabilities in critical infrastructure industrial control systems. PhD thesis, Nova Southeastern University, USA.

Elsherbiny, A (2021) Prediction of design error rework cost in EPC industrial projects. DEng thesis, George Washington University, USA.

Eltinay, N and Egbu, C (2017) Disaster risk reduction conceptual framework: Open data for building resilience in critical infrastructure. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Embry, E (2023) Building change: A multi-level analysis of resilience through sustainability, health, and entrepreneurship in the built environment. PhD thesis, University of Colorado at Boulder, USA.

Emsley, M W (2001) A model to optimize single tower crane location within a construction site. PhD thesis, Loughborough University, UK.

Emsoff, J E (1994) An object-oriented environment for the visual integration of project scheduling data. PhD thesis, Texas A&M University, USA.

Engelen, L; Chau, J; Young, S; Mackey, M; Jeyapalan, D and Bauman, A (2019) Is activity-based working impacting health, work performance and perceptions? A systematic review. Building Research & Information, 47(4), pp. 468-479. ISSN 0961-3218

Engelen, L; Rahmann, M and de Jong, E (2022) Design for healthy ageing–the relationship between design, well-being, and quality of life: A review. Building Research & Information, 50(1-2), pp. 19-35. ISSN 0961-3218

Engida Woldemichael, D. and Mohd Hashim, F. (2011) A framework for functionbased conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

Engida Woldemichael, D and Mohd Hashim, F (2011) A framework for function-based conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

Enshassi, M S A; Walbridge, S; West, J S and Haas, C T (2020) Dynamic and proactive risk-based methodology for managing excessive geometric variability issues in modular construction projects using Bayesian theory. Journal of Construction Engineering and Management, 146(2): 04019096, ISSN 0733-9364

Enz, D L (2009) Construction project administration and management for mitigating work zone crashes and fatalities: An integrated risk management model. PhD thesis, Iowa State University, USA.

Epstein, W C (1995) Development of a systematic approach for knowledge acquisition and experience capture of veteran practitioners in the highway construction industry. PhD thesis, University of Florida, USA.

Erbatur, O C (2012) A methodology for estimating construction unit bid prices. DEng thesis, Texas A&M University, USA.

Erfani, A (2023) Data-driven risk modeling for infrastructure projects using artificial intelligence techniques. PhD thesis, University of Maryland, College Park, USA.

Ergen, E (2005) Formalization of life-cycle data management of engineered-to-order components using advanced tracking technologies. PhD thesis, Carnegie Mellon University, USA.

Erkan, I (2020) A system proposal for rapid detecting of anthropometric data and affecting design strategies. Journal of Engineering, Design and Technology, 18(6), pp. 1793-1822. ISSN 1726-0531

Ertekin, A O (2013) Probabilistic life cycle cost optimization of bridges. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Eskander, A K (1998) Total project management delay analysis method (TPM-DAM) with emphasis on project preplanning. PhD thesis, Polytechnic University, USA.

Esmaeili, I; Poças Martins, J and Castro, J M (2026) Computer vision-based CAD to BIM design change management: Case of building's lightings. International Journal of Construction Management, 26(2), pp. 234-255. ISSN 1562-3599

Esmaeili, B (2012) Identifying and quantifying construction safety risks at the attribute level. PhD thesis, University of Colorado at Boulder, USA.

Esmaeili, B and Hallowell, M (2013) Integration of safety risk data with highway construction schedules. Construction Management and Economics, 31(6), pp. 528-541. ISSN 1466433X

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. I: Analysis at the fundamental level. Journal of Construction Engineering and Management, 141(8): 04015021, ISSN 0733-9364

Essaghouri, L.; Xu, F.; Zhu, C.; Aletoum, E. and Li, X. (2026) Two decades of embodied carbon in MENA's construction sector: Regional insights and policy implications. Journal of Construction Engineering and Management, 152(10): 04026171, ISSN 0733-9364

Evans, S.; Steadman, P.; Neto-Bradley, A.; Humphrey, D.; Liddiard, R.; Shamsi, H.; Palmer, J. and Simons, G. (2026) Nine 'myths' about the building stock of Great Britain. Buildings & Cities, 7(1), pp. 704-721. ISSN 2632-6655

Evans, M (2013) An investigation into occupants' satisfaction in UK sustainable social housing. PhD thesis, University of the West of England, Bristol, UK.

Evans, R C (2002) Dynamic cash flow forecasting model for construction contractors. PhD thesis, University of Liverpool, UK.

Eze, E C; Sofolahan, O; Ugulu, R A and Ameyaw Effah, E E (2025) Bolstering circular economy in construction through digitalisation. Construction Innovation, 25(6), pp. 1774-1796. ISSN 1471-4175

Fadiya, O; Georgakis, P; Chinyio, E and Nwagboso, C (2010) Development of an ICT-based logistics framework for the construction industry. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Fahmie, M M (1994) A knowledge-based expert system approach to analyze and evaluate highway construction schedules. PhD thesis, Florida University, USA.

Falaq Assad, N; Edwards, D J; Shelbourn, M; Martek, I; Wellington Didibhuku Didibhuku, T and El-Gohary, H (2021) Comparison of modular and traditional UK housing construction: A bibliometric analysis. Journal of Engineering, Design and Technology, 19(1), pp. 164-186. ISSN 1726-0531

Fan, C L (2020) Defect risk assessment using a hybrid machine learning method. Journal of Construction Engineering and Management, 146(9): 04020102, ISSN 0733-9364

Fan, H (2007) Leveraging operational data for intelligent decision support in construction equipment management. PhD thesis, University of Alberta, Canada.

Fan, X (2024) Artificial intelligence aided resilient and sustainable water infrastructure systems. PhD thesis, Case Western Reserve University, USA.

Fang, Y; Cho, Y K; Zhang, S and Perez, E (2016) Case study of BIM and cloud-enabled real-time RFID indoor localization for construction management applications. Journal of Construction Engineering and Management, 142(7): 5016003, ISSN 0733-9364

Fang, Z (2022) Machine learning integrated portfolio-based strategic building asset management. PhD thesis, University College London, UK.

Faqih, F; Zayed, T and Alfalah, G (2022) Technology-based multi-tiered building diagnosis framework. International Journal of Building Pathology and Adaptation, 40(1), pp. 101-133. ISSN 23984708

Farghaly, K; Collinge, W; Mosleh, M H; Manu, P and Cheung, C M (2022) Digital information technologies for prevention through design (ptd): A literature review and directions for future research. Construction Innovation, 22(4), pp. 1036-1058. ISSN 1471-4175

Farokhnia, K (2013) Nonstructural vulnerability functions for building categories. PhD thesis, University of Colorado at Boulder, USA.

Farooghi, F (2020) The effect of natural disasters on construction labor wage fluctuations: A spatial difference-in-difference analysis. PhD thesis, University of Texas at Arlington, USA.

Farooq, M. and Paracha, A. T. (2026) Cost prediction of road construction projects in Pakistan using machine learning. International Journal of Construction Management, 26(8), pp. 1442-1470. ISSN 1562-3599

Farrington, J J (1987) A methodology to identify and categorize costs of quality deviations in design and construction. PhD thesis, Clemson University, USA.

Farzaneh, A (2019) Development of BIM-BEM framework to support the design process. DEng thesis, Ecole de Technologie Superieure, Canada.

Favie, R (2010) Quality monitoring in infrastructural design-build projects: the analysis of an audit-based monitoring system. PhD thesis, Eindhoven University of Technology, Netherlands.

Fayek, A R and Oduba, A (2005) Predicting industrial construction labor productivity using fuzzy expert systems. Journal of Construction Engineering and Management, 131(8), pp. 938-941. ISSN 0733-9364

Federico, D A; Berta, M; Bottero, M; Mallia, G and Morgese, V (2024) Multicriteria-decision support for master plan scheduling: Urban regeneration of an industrial area in Northern Italy. Construction Management and Economics, 42(5), pp. 476-501. ISSN 01446193

Feng, K (2020) Environmentally friendly construction processes under uncertainty assessment, optimisation and robust decision-making. PhD thesis, Luleå University of Technology, Sweden.

Feng, X; Ahmed, V and Mahdjoubi, L (2003) Spatial visualization of building components. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Fernando, A; Siriwardana, C; Law, D; Gunasekara, C; Zhang, K and Gamage, K (2026) A scoping review and analysis of green construction research: A machine learning aided approach. Smart and Sustainable Built Environment, 15(1), pp. 62-91. ISSN 2046-6099

Fernando, L. S.; Kulatunga, U.; Ranadewa, T. and Keraminiyage, K. P. (2026) Accelerating disaster recovery: An agile approach to enhancing community disaster resilience. International Journal of Disaster Resilience in the Built Environment, 17(2), pp. 181-202. ISSN 1759-5908

Fialho, Beatriz Campos (2021) Design for smart maintenance enabled by BIM and IoT. PhD thesis, Universidade de São Paulo, Brazil.

Figueiredo, W C (1995) A KBES to analyze the environmental impact of proposed highway design alternatives. PhD thesis, University of Central Florida, USA.

Fini, A A F; Akbarnezhad, A; Rashidi, T H and Waller, S T (2018) Dynamic programming approach toward optimization of workforce planning decisions. Journal of Construction Engineering and Management, 144(2): 04017113, ISSN 0733-9364

Fischer, M A (1991) Using construction knowledge during preliminary design of reinforced concrete structures. PhD thesis, Stanford University, USA.

Fisher, D J; O'Neill, M W and Contreras, J C (1995) DS^2: Drilled shaft decision support system. Journal of Construction Engineering and Management, 121(1), pp. 86-94. ISSN 0733-9364

Fisher, D J and Rajan, N (1996) Automated constructibility analysis of work-zone traffic-control planning. Journal of Construction Engineering and Management, 122(1), pp. 36-43. ISSN 0733-9364

Fisher, N (1990) The use of structured data analysis as a construction management research tool: 1. The technique. Construction Management and Economics, 8(4), pp. 341-362. ISSN 01446193

Fitz, D V and Saleeb, N (2019) Examining the quality and management of non-geometric building information modelling data at project hand-over. Architectural Engineering and Design Management, 15(4), pp. 297-310. ISSN 1745-2007

Flinkman, M (1994) The market for sawnwood in Germany: Analysis and forecast to the year 2000. SkoglDr thesis, Sveriges Lantbruksuniversitet, Sweden.

Florez, L; Castro, D and Irizarry, J (2013) Measuring sustainability perceptions of construction materials. Construction Innovation, 13(2), pp. 217-234. ISSN 1471-4175

Fobiri, G; Musonda, I and Muleya, F (2025) Unlocking the full potential of reality capture for construction project cost monitoring: A mixed review. Journal of Engineering, Design and Technology, 23(3), pp. 830-853. ISSN 1726-0531

Fobiri, Godfred (2024) A framework to apply reality capture technology for interim payment valuation of construction projects. PhD thesis, University of Johannesburg, South Africa.

Forbes, Lincoln Harding (1999) An engineering management-based investigation of owner satisfaction, quality and performance variables in health care facilities construction. PhD thesis, University of Miami, USA.

Formoso, C T (1991) A knowledge based framework for planning house building projects. PhD thesis, University of Salford, UK.

Forsythe, P (2014) Proactive construction safety systems and the human factor. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(5), pp. 242-252. ISSN 17514304

Foudah, A; Tarek, M; Essam, S; El Hawary, M; Adel, K and Marzouk, M (2026) Digital twin publications in construction (2017–2023): A bibliometrics-based visualization analysis. Construction Innovation, 26(1), pp. 147-172. ISSN 1471-4175

Fouiteh, I; Santelices, J D C; Susini, A and Patel, M K (2024) Operationalising building-related energy sufficiency measures in SMEs. Buildings & Cities, 5(1), pp. 368-387. ISSN 2632-6655

Francis, A and Thomas, A (2022) A machine learning-based life cycle assessment prediction model for the environmental impacts of buildings. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Franco, M and Rodrigues, M (2022) Indicators to measure the performance of sustainable urban entrepreneurship: An empirical case study applied to Portuguese cities and towns. Smart and Sustainable Built Environment, 11(1), pp. 19-38. ISSN 2046-6099

Frank, M (2017) Uncovering hidden demands of global learners: Mind and body in a PBL context. PhD thesis, Stanford University, USA.

Fredericks, T; Abudayyeh, O; Palmquist, M and Torres, H N (2002) Mechanical contracting safety issues. Journal of Construction Engineering and Management, 128(2), pp. 186-193. ISSN 0733-9364

Fredericks, T K; Abudayyeh, O; Choi, S D; Wiersma, M and Charles, M (2005) Occupational injuries and fatalities in the roofing contracting industry. Journal of Construction Engineering and Management, 131(11), pp. 1233-1240. ISSN 0733-9364

Froese, T M (1992) Integrated computer-aided project management through standard object-oriented models. PhD thesis, Stanford University, USA.

Fu, Y and Zhu, J (2021) Trusted data infrastructure for smart cities: A blockchain perspective. Building Research & Information, 49(1), pp. 21-37. ISSN 0961-3218

Fuerst, F; McAllister, P; Van Wetering, J and Wyatt, P (2011) Measuring the financial performance of green buildings in the UK commercial property market: Addressing the data issues. Journal of Financial Management of Property and Construction, 16(2), pp. 163-185. ISSN 1366-4387

Fuerst, F; Van De Wetering, J and Wyatt, P (2013) Is intrinsic energy efficiency reflected in the pricing of office leases? Building Research & Information, 41(4), pp. 373-383. ISSN 0961-3218

Funches Allen, Dawn (2025) Analyzing factors that contribute to cost overruns on department of defense (dod) contractor programs. DEngr thesis, George Washington University, USA.

Fung, C K A (1996) Development of a TQM model for improving business performance based on surveys conducted in Hong Kong, Japan and the UK. PhD thesis, De Montfort University, UK.

Futcher, K (2001) Managing portfolios of projects. PhD thesis, Loughborough University, UK.

Futcher, K and Thorpe, A (2001) Monte Carlo simulation and Pareto techniques for calculation of multi-project outturn-variance. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Gaafar, H K (1997) Risk allocations in standard forms of engineering and construction contract. PhD thesis, University of Birmingham, UK.

Gabe, J (2016) Successful greenhouse gas mitigation in existing Australian office buildings. Building Research & Information, 44(2), pp. 160-174. ISSN 0961-3218

Gaber, B; Zhan, C; Han, X; Omar, M and Li, G (2024) Employing ANN for daylight and energy prediction of hot climate office buildings: A case study of new cairo, Egypt. Architectural Engineering and Design Management, 20(6), pp. 1752-1776. ISSN 1745-2007

Gabriela Alves Tenório de, M; Claudia, R S d M S N; dos Santos, E B; Kleyton, M N d S; Fernandes, B S and Rachel Perez, P (2024) Integration potential between Revit and LEED: A review. Architectural Engineering and Design Management, 20(3), pp. 510-525. ISSN 1745-2007

Galbraith, G H; McLean, R C and Guo, J S (1998) Moisture permeability data presented as a mathematical relationship. Building Research & Information, 26(3), pp. 157-168. ISSN 0961-3218

Galbraith, P J (1995) The development of a classification system for construction industry clients. PhD thesis, University of Reading, UK.

Galiano-Garrigós, A; García-Figueroa, A; Rizo-Maestre, C and González-Avilés, Á (2019) Evaluation of BIM energy performance and CO2 emissions assessment tools: A case study in warm weather. Building Research & Information, 47(7), pp. 787-812. ISSN 0961-3218

Galvin, R (2023) How prebound effects compromise the market premium for energy efficiency in German house sales. Building Research & Information, 51(5), pp. 501-517. ISSN 0961-3218

Gameson, R (1992) An investigation into the interaction between potential building clients and construction professionals. PhD thesis, University of Reading, UK.

Gamez, E A (2009) Risk assessment for international development projects: Owner's perspective. PhD thesis, Northeastern University, USA.

Ganguly, I (2008) Modeling alternatives and visualization of product adoption and usage in the residential construction industry. PhD thesis, University of Washington, USA.

Gao, M Y; Han, J; Yang, Y; Tiong, R L K; Zhao, C and Han, C (2024) BIM-based and IoT-driven smart tracking for precast construction dynamic scheduling. Journal of Construction Engineering and Management, 150(9): 04024117, ISSN 0733-9364

Gao, X; Pishdad-Bozorgi, P; Shelden, D R and Tang, S (2021) Internet of things enabled data acquisition framework for smart building applications. Journal of Construction Engineering and Management, 147(2): 04020169, ISSN 0733-9364

Gao, Y; Casasayas, O; Wang, J and Xu, X (2023) Factors affecting the blockchain application in construction management in China: An ANP-SWOT hybrid approach. Architectural Engineering and Design Management, 19(6), pp. 665-680. ISSN 1745-2007

Gaur, S and Tawalare, A (2024) Assessing the implications of BIM on sustainability of construction projects through design risk management. Built Environment Project and Asset Management, 14(3), pp. 470-489. ISSN 2044-124X

Gehrig, G B (2002) A decision support system framework to improve design-construction integration and project performance on public sector underground utility projects. PhD thesis, Colorado State University, USA.

Genc, O. (2026) Utilizing advanced language models to identify industrial symbiosis opportunities within the circular economy: Capabilities and challenges. Engineering, Construction and Architectural Management, 33(4), pp. 3076-3099. ISSN 0969-9988

Genc, O (2021) Symbioconstruction: A bibliography-driven dynamic construction industry symbiosis database. Journal of Construction Engineering and Management, 147(8): 04021077, ISSN 0733-9364

Georgiadou, M C; Greenwood, D; Schiano-Phan, R and Russo, F (2024) Assessing retrofit policies for fuel-poor homes in London. Buildings & Cities, 5(1), pp. 133-149. ISSN 2632-6655

Gerassis, S; Martín, J E; García, J T; Saavedra, A and Taboada, J (2017) Bayesian decision tool for the analysis of occupational accidents in the construction of embankments. Journal of Construction Engineering and Management, 143(2): 04016093, ISSN 0733-9364

Gerstenberger, A J (2021) Modeling the likelihood of construction incidents using public data. EdD thesis, Teachers College, Columbia University, USA.

Ghaffari, F; Shabak, M; Norouzi, N and Nayyeri Fallah, S (2023) Hospital salutogenic public spaces: A conceptual framework of effective perceptional environment quality components on patients' satisfaction. International Journal of Building Pathology and Adaptation, 41(5), pp. 965-987. ISSN 23984708

Ghafoori, M (2023) Developing building maintenance and upgrade system (BMUS) to minimize operational cost of existing buildings within available budgets. PhD thesis, University of Colorado at Denver, USA.

Ghafoori, M and Abdallah, M (2022) Simulation-based optimization model to minimize equivalent annual cost of existing buildings. Journal of Construction Engineering and Management, 148(2): 04021202, ISSN 0733-9364

Ghafoori, M and Abdallah, M (2025) Multi-criteria decision support model for material and supplier selection in the construction industry. International Journal of Construction Management, 25(4), pp. 409-418. ISSN 1562-3599

Ghanem, A (2007) Real-time construction project progress tracking: A hybrid model for wireless technologies selection, assessment, and implementation. PhD thesis, Florida State University, USA.

Ghansah, F A and Lu, W (2024) Major opportunities of digital twins for smart buildings: A scientometric and content analysis. Smart and Sustainable Built Environment, 13(1), pp. 63-84. ISSN 2046-6099

Ghansah, F A (2025) Digital twins for smart building at the facility management stage: A systematic review of enablers, applications and challenges. Smart and Sustainable Built Environment, 14(4), pp. 1194-1229. ISSN 2046-6099

Gharaibeh, L; Eriksson, K M; Lantz, B; Matarneh, S and Elghaish, F (2024) Toward digital construction supply chain-based industry 4.0 solutions: Scientometric-thematic analysis. Smart and Sustainable Built Environment, 13(1), pp. 42-62. ISSN 2046-6099

Gharaie, E; Lingard, H and Cooke, T (2015) Causes of fatal accidents involving cranes in the Australian construction industry. Construction Economics and Building, 15(2), pp. 1-12. ISSN 2204-9029

Ghasemi, M; Chakrabortty, R K; Shahabi-Shahmiri, R and Mirnezami, S A (2024) A chance-constrained programming method with credibility measure for solving the multi-skill multi-mode resource-constrained project scheduling problem. International Journal of Construction Management, 24(10), pp. 1090-1106. ISSN 1562-3599

Ghazal, M M and Hammad, A (2022) Application of knowledge discovery in database (KDD) techniques in cost overrun of construction projects. International Journal of Construction Management, 22(9), pp. 1632-1646. ISSN 1562-3599

Ghazal, N M (1992) Design of excavation operations using expert systems. PhD thesis, University of Cincinnati, USA.

Ghodoosi, F; Abu-Samra, S; Zeynalian, M and Zayed, T (2018) Maintenance cost optimization for bridge structures using system reliability analysis and genetic algorithms. Journal of Construction Engineering and Management, 144(2): 04017116, ISSN 0733-9364

Gholizadeh, P and Esmaeili, B (2020) Cost of occupational incidents for electrical contractors: Comparison using robust-factorial analysis of variance. Journal of Construction Engineering and Management, 146(7): 0001861, ISSN 0733-9364

Gibson, G E (1990) Data integration and transfer methodologies in industrial construction. PhD thesis, Auburn University, USA.

Gibson, G E and Bell, L C (1990) Electronic data interchange in construction. Journal of Construction Engineering and Management, 116(4), pp. 727-737. ISSN 0733-9364

Gibson, G E and Bell, L C (1992) Integrated data-base systems. Journal of Construction Engineering and Management, 118(1), pp. 50-59. ISSN 0733-9364

Giesekam, J J (2016) The contribution to UK climate mitigation targets from reducing embodied carbon in the construction sector. PhD thesis, University of Leeds, UK.

Gilham, A (2023) The relationship between customers’ satisfaction and trust in the global supply chain and profitability. DBA thesis, Walden University, USA.

Gilleard, J (1989) Computerized reference sources in the construction industry. Construction Management and Economics, 7(4), pp. 321-330. ISSN 01446193

Gillespie, D and McIlwaine, S (2021) Reducing embodied carbon in the construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Gillott, M; Holland, R; Riffat, S and Fitchett, J A (2006) Post-occupancy evaluation of space use in a dwelling using RFID tracking. Architectural Engineering and Design Management, 2(4), pp. 273-288. ISSN 1745-2007

Giupponi, N and Thomson, C (2020) The implication of advances in community mapping through spatial information technologies for urban regeneration projects. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Glick, S; Folkestad, J and Banning, J (2016) Construction management dissertation abstracts: A bounded qualitative meta-study. International Journal of Construction Education and Research, 12(1), pp. 54-65. ISSN 1557-8771

Godby, C J (2002) A computational study of lexicalized noun phrases in English. PhD thesis, Ohio State University, USA.

Godfrey, R J (2007) Analysis of construction worker injury information from a workers' compensation database. PhD thesis, University of Florida, USA.

Godoy-Shimizu, D; Armitage, P; Steemers, K and Chenvidyakarn, T (2011) Using display energy certificates to quantify schools' energy consumption. Building Research & Information, 39(6), pp. 535-552. ISSN 0961-3218

Godoy-Shimizu, D; Hong, S M; Korolija, I; Schwartz, Y; Mavrogianni, A and Mumovic, D (2022) Pathways to improving the school stock of England towards net zero. Buildings & Cities, 3(1), pp. 939-963. ISSN 2632-6655

Goedert, J D and Meadati, P (2008) Integrating construction process documentation into building information modeling. Journal of Construction Engineering and Management, 134(7), pp. 509-516. ISSN 0733-9364

Goh, B H (2016) Designing a whole-life building cost index in Singapore. Built Environment Project and Asset Management, 6(2), pp. 159-173. ISSN 2044-124X

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Golizadeh, H; Banihashemi, S; Sadeghifam, A N and Preece, C (2017) Automated estimation of completion time for dam projects. International Journal of Construction Management, 17(3), pp. 197-209. ISSN 1562-3599

Goncalves, Gustavo Henrique Vital (2022) Scenarios and support system for consortium management of construction waste applied to water resources management unit 12. PhD thesis, Universidade Federal de São Carlos, Brazil.

González, J; Barzellay Ferreira da Costa, B; Tam, V W Y and Haddad, A N (2025) Integration of 4.0 technologies towards the creation of digital twins. International Journal of Construction Management, 25(13), pp. 1516-1533. ISSN 1562-3599

Gosling, J; Naim, M; Towill, D; Abouarghoub, W and Moone, B (2015) Supplier development initiatives and their impact on the consistency of project performance. Construction Management and Economics, 33(5-6), pp. 390-403. ISSN 01446193

Gosling, J; Naim, M; Towill, D and Moone, B (2014) The impact of supplier development initiatives on key performance indicators. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Govertsen, K and Kane, M (2024) Measuring health inequities due to housing characteristics. Buildings & Cities, 5(1), pp. 451-469. ISSN 2632-6655

Gowri, K and Depanni, S (1998) The health and safety expert system (HASES): An expert system framework for building inspections. Engineering, Construction and Architectural Management, 5(1), pp. 92-101. ISSN 0969-9988

Grabham, S and Manu, E (2022) Diffusion of platform thinking as an innovation in the construction supply chain. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(3), pp. 119-130. ISSN 17514304

Graham, B and Thomas, K (2008) Learning from experience: Aligning continuing professional development with knowledge management. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Graham, L T; Parkinson, T and Schiavon, S (2021) Lessons learned from 20 years of CBE's occupant surveys. Buildings & Cities, 2(1), pp. 166-184. ISSN 2632-6655

Graham, P and Rawal, R (2019) Achieving the 2°C goal: The potential of India's building sector. Building Research & Information, 47(1), pp. 108-122. ISSN 0961-3218

Grahn, Karin (2023) Occupational exposure to particles in relation to chronic obstructive pulmonary disease and cardiovascular disease. PhD thesis, Karolinska Institutet, Sweden.

Graig, N (2007) The prevailing trends of defects and snagging in new homes in the UK. PhD thesis, Glasgow Caledonian University, UK.

Gram-Hanssen, K (2014) New needs for better understanding of household's energy consumption: behaviour, lifestyle or practices? Architectural Engineering and Design Management, 10(1-2), pp. 91-107. ISSN 1745-2007

Gransberg, Nils (2021) A critical analysis of construction manager-at-risk project delivery in public university capital projects. PhD thesis, University of Oklahoma, USA.

Gravitt, D D (2004) The development and validation of a bar code based residential construction quality inspection procedure. PhD thesis, Indiana State University, USA.

Gray, C (1986) Intelligent' construction time and cost analysis. Construction Management and Economics, 4(2), pp. 135-150. ISSN 01446193

Gray, C and Little, J (1985) A systematic approach to the selection of an appropriate crane for a construction site. Construction Management and Economics, 3(2), pp. 121-144. ISSN 01446193

Gregory, R A (1992) Development of a knowledge-based system approach for decision-making in construction projects. PhD thesis, University of Florida, USA.

Grey Rodriguez, F C (2019) Space-mate: A framework to harmonize occupant well-being and building sustainability. PhD thesis, Stanford University, USA.

Gu, Y (2011) The impacts of real-time knowledge based personal lighting control on energy consumption, user satisfaction and task performance in offices. PhD thesis, Carnegie Mellon University, USA.

Guevara, J; Herrera, L and Salazar, J (2022) Interorganizational sponsor networks in road and social infrastructure PPP equity markets. Journal of Construction Engineering and Management, 148(4): 04022009, ISSN 0733-9364

Gultekin, P (2015) An integrated process model and decision support system for energy efficient retrofits. PhD thesis, Pennsylvania State University, USA.

Gunay, H B; Shen, W and Yang, C (2019) Text-mining building maintenance work orders for component fault frequency. Building Research & Information, 47(5), pp. 518-533. ISSN 0961-3218

Guo, H and Lu, W (2023) Measuring competitiveness with data-driven principal component analysis: A case study of chinese international construction companies. Engineering, Construction and Architectural Management, 30(4), pp. 1558-1577. ISSN 0969-9988

Guo, H; Yu, Y; Ding, Q and Skitmore, M (2018) Image-and-skeleton-based parameterized approach to real-time identification of construction workers' unsafe behaviors. Journal of Construction Engineering and Management, 144(6): 04018042, ISSN 0733-9364

Gupta, A (2013) Developing a BIM-based methodology to support renewable energy assessment of buildings. PhD thesis, Cardiff University, UK.

Gupta, R; Gregg, M and Liu, C (2025) Local area energy mapping approach for high-density heat pump deployment. Buildings & Cities, 6(1), pp. 561-579. ISSN 2632-6655

Guven, G and Ergen, E (2013) Factors affecting the selection of data storage approach in radio frequency identification applications. Construction Innovation, 13(1), pp. 117-138. ISSN 1471-4175

Guyer, R C and Laman, J A (2012) Short-line railroad management system for bridge prioritization. Built Environment Project and Asset Management, 2(1), pp. 25-40. ISSN 2044-124X

Gyadu-Asiedu, Nana Akua Asabea; Aigbavboa, Clinton and Stephen, Seyi (2026) Nature-based solutions and materials promoting net-zero construction in South Africa: Trends and insights from a bibliometric review. Journal of Construction Business and Management, 8(2), pp. 28-42. ISSN 2521-0165

Gyampoh-Vidogah, R (2002) Improving project administration in the construction industry using EDMS: an integrated IS/IT solution. PhD thesis, University of Wolverhampton, UK.

Gyampoh-Vidogah, R; Moreton, R and Proverbs, D (2003) Implementing information management in construction: Establishing problems, concepts and practice. Construction Innovation, 3(3), pp. 157-173. ISSN 1471-4175

Hadikusumo, B H W (2001) Virtually real construction site processes: hazard identification and accident precaution planning using design-for-safety-process (DFSP) tool. PhD thesis, University of Hong Kong, Hong Kong.

Haigh, R. (2026) Repositioning construction management education for Construction 5.0: An accreditation-aligned competency framework and review. Construction Management and Economics, 44(9), pp. 674-702. ISSN 0144-6193

Haigh, R and Amaratunga, D (2010) An integrative review of the built environment discipline's role in the development of society's resilience to disasters. International Journal of Disaster Resilience in the Built Environment, 1(1), pp. 11-24. ISSN 1759-5916

Hailu, H and Tshehla, M (2025) A conceptual framework for enhancing subcontracting performance in the construction industry of developing countries. Journal of Construction Business and Management, 7(2), pp. 1-15.

Hallowell, M; Esmaeili, B and Chinowsky, P (2011) Safety risk interactions among highway construction work tasks. Construction Management and Economics, 29(4), pp. 417-429. ISSN 1466433X

Hallowell, M R; Alexander, D and Gambatese, J A (2017) Energy-based safety risk assessment: Does magnitude and intensity of energy predict injury severity? Construction Management and Economics, 35(1-2), pp. 64-77. ISSN 01446193

Hallowell, M R; Hardison, D and Desvignes, M (2016) Information technology and safety: Integrating empirical safety risk data with building information modeling, sensing, and visualization technologies. Construction Innovation, 16(3), pp. 323-347. ISSN 1471-4175

Halpin, J E (1999) The impact of out-of-town stores on local wildlife habitats. PhD thesis, University of Southampton, UK.

Hamiani, A (1987) Consite: A knowledge-based expert system framework for construction site layout. PhD thesis, University of Texas at Austin, USA.

Hamida, A; Alsudairi, A; Alshaibani, K and Alshamrani, O (2022) Parametric study of the impact of building envelope systems on embodied and operational carbon of residential buildings. International Journal of Building Pathology and Adaptation, 40(5), pp. 753-774. ISSN 23984708

Hamida, M B; Jylhä, T; Remøy, H and Gruis, V (2022) Circular building adaptability and its determinants: a literature review. International Journal of Building Pathology and Adaptation, 41(6), pp. 47-69. ISSN 23984708

Hamidi, Behzad (2015) A BIM-based object-oriented data model to support sustainable demolition waste management decision making at end-of-life. PhD thesis, Virginia Tech, USA.

Hamilton, I G; Shipworth, D; Summerfield, A J; Steadman, P; Oreszczyn, T and Lowe, R (2014) Uptake of energy efficiency interventions in English dwellings. Building Research & Information, 42(3), pp. 255-275. ISSN 0961-3218

Hammad, M M (2001) CPDICenter: Web-based virtual construction project document information center in support of claims preparation. PhD thesis, Concordia University, Canada.

Hammond, S and Cattell, K (2017) Sizwe banzi is dead: The aberrant case of construction sector identity. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Hamza, M; Shahid, S; Bin Hainin, M R and Nashwan, M S (2022) Construction labour productivity: Review of factors identified. International Journal of Construction Management, 22(3), pp. 413-425. ISSN 1562-3599

Han, S (2005) Application modeling of the conventional and the GPS-based earthmoving systems. PhD thesis, Purdue University, USA.

Han, S-H (2004) A working prototype of distributed collaborative architectural design system. PhD thesis, University of Michigan, USA.

Han, Sang Hyeok (2014) BIM-based motion planning of mobile crane operation in modular-based heavy construction sites. PhD thesis, University of Alberta, Canada.

Han, Y; Shen, J; Zhu, X; An, B and Bao, X (2024) Interaction mechanisms of interface management risks in complex systems of high-speed rail construction projects: An association rule mining-based modeling framework. Engineering, Construction and Architectural Management, 31(5), pp. 2101-2127. ISSN 0969-9988

Haniff, A P and Kaka, A P (2001) A framework for development of a knowledge database for use within the construction industry. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Hanmer, C; Few, J; Hollick, F; Elam, S and Oreszczyn, T (2026) Tracking energy signatures of British homes from 2020 to 2025. Buildings & Cities, 7(1), pp. 176-195. ISSN 2632-6655

Hanna, A S; Iskandar, K A and Lotfallah, W (2019) Benchmarking project performance: A guideline for assessing vulnerability of mechanical and electrical projects to productivity loss. Construction Management and Economics, 37(2), pp. 101-111. ISSN 01446193

Hanna, A S; Willenbrock, J H and Sanvido, V E (1992) Knowledge acquisition and development for formwork selection system. Journal of Construction Engineering and Management, 118(1), pp. 179-198. ISSN 0733-9364

Haran, M; McCord, M; Hutchison, N; McGreal, S; Adair, A; Berry, J and Kashyap, A (2013) Financial structure of PPPs deals post-GFC: An international perspective. Journal of Financial Management of Property and Construction, 18(2), pp. 184-203. ISSN 1366-4387

Harison, J C (1993) Laboring class, dangerous class, insurgent class: The Paris building trades, 1830-1871. PhD thesis, University of Iowa, USA.

Haron, A T (2013) Organisational readiness to implement building information modelling: a framework for design consultants in Malysia. PhD thesis, University of Salford, UK.

Harthi, B A A (2015) Risk management in fast-track projects: a study of UAE construction projects. PhD thesis, University of Wolverhampton, UK.

Hartmann, A (2023) Learning between projects: An accomplishment of social-material practices in projects. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Hartwig, J and Kockat, J (2016) Macroeconomic effects of energetic building retrofit: Input-output sensitivity analyses. Construction Management and Economics, 34(2), pp. 79-97. ISSN 01446193

Harun, Z B (1993) Computer simulation in decision support systems for management of construction projects. PhD thesis, University of Leeds, UK.

Hasan, R (2025) Megaproject announcements' impact on firm value: Evidence from international project finance deals. PhD thesis, Southern New Hampshire University, USA.

Hasan, S; Al-Hussein, M; Hermann, U H and Safouhi, H (2010) Interactive and dynamic integrated module for mobile cranes supporting system design. Journal of Construction Engineering and Management, 136(2), pp. 179-186. ISSN 0733-9364

Hassan, F U; Le, T and Le, C (2023) Automated approach for digitalizing scope of work requirements to support contract management. Journal of Construction Engineering and Management, 149(4): 04023005, ISSN 0733-9364

Hassan, Fahad Ul (2022) Digitalization of construction project requirements using natural language processing (NLP) techniques. PhD thesis, Clemson University, USA.

Hassanein, A (2003) Planning and scheduling highway construction using GIS and dynamic programming. PhD thesis, Concordia University, Canada.

Hassanein, A and Moselhi, O (2004) Planning and scheduling highway construction. Journal of Construction Engineering and Management, 130(5), pp. 638-646. ISSN 0733-9364

Hassanein, A and Moselhi, O (2005) Accelerating linear projects. Construction Management and Economics, 23(4), pp. 377-385. ISSN 01446193

Hatamleh, M T; Hiyassat, M; Sweis, G J and Sweis, R J (2018) Factors affecting the accuracy of cost estimate: Case of Jordan. Engineering, Construction and Architectural Management, 25(1), pp. 113-131. ISSN 0969-9988

Hayford, J K T; Eccles, T and Fong, D (2023) Development of conceptual motivation framework to enhance construction labour productivity in the UK. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

He, S (2018) A project-level infrastructure management framework for sustainable roadways. PhD thesis, Syracuse University, USA.

He, X; Liu, R and Anumba, C J (2021) Data-driven insights on the knowledge gaps of conceptual cost estimation modeling. Journal of Construction Engineering and Management, 147(2): 04020165, ISSN 0733-9364

Heesom, D; Boden, P; Hatfield, A; De Los Santos Melo, A and Czarska-Chukwurah, F (2021) Implementing a HBIM approach to manage the translocation of heritage buildings. Engineering, Construction and Architectural Management, 28(10), pp. 2948-2966. ISSN 0969-9988

Hegazy, T M (1994) Integrated bid preparation with emphases on risk assessment using neural networks. PhD thesis, Concordia University, Canada.

Heidrich, O; Kamara, J; Maltese, S; Re Cecconi, F and Dejaco, M C (2017) A critical review of the developments in building adaptability. International Journal of Building Pathology and Adaptation, 35(4), pp. 284-303.

Hendrickson, C; Martinelli, D and Rehak, D (1987) Hierarchical rule-based activity duration estimation. Journal of Construction Engineering and Management, 113(2), pp. 288-301. ISSN 0733-9364

Hermann, U H; Hasan, S; Al-Hussein, M and Bouferguene, A (2011) Innovative system for off-the-ground rotation of long objects using mobile cranes. Journal of Construction Engineering and Management, 137(7), pp. 478-485. ISSN 0733-9364

Herrera-Avellanosa, D; Haas, F; Leijonhufvud, G; Brostrom, T; Buda, A; Pracchi, V; Webb, A L; Hüttler, W and Troi, A (2020) Deep renovation of historic buildings: The iea-shc task 59 path towards the lowest possible energy demand and CO2 emissions. International Journal of Building Pathology and Adaptation, 38(4), pp. 539-553. ISSN 23984708

Hezel, Claudia Regina (2014) Impact assessment of the requirements of the contractor in integrated management systems for industrial assembly companies in the oil industry. PhD thesis, Universidade Estadual de Campinas, Brazil.

Hijazi, A A; Perera, S; Calheiros, R N and Alashwal, A (2021) Rationale for the integration of BIM and blockchain for the construction supply chain data delivery: A systematic literature review and validation through focus group. Journal of Construction Engineering and Management, 147(10): 03121005, ISSN 0733-9364

Hijazi, A A; Perera, S; Calheiros, R N and Alashwal, A (2023) A data model for integrating BIM and blockchain to enable a single source of truth for the construction supply chain data delivery. Engineering, Construction and Architectural Management, 30(10), pp. 4645-4664. ISSN 0969-9988

Hijazi, S A (2016) Developing a framework to enhance building handover practices in public sector construction projects in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Hilal, M; Maqsood, T and Abdekhodaee, A (2019) A scientometric analysis of BIM studies in facilities management. International Journal of Building Pathology and Adaptation, 37(2), pp. 122-139. ISSN 23984708

Hindmarch, H; Gale, A W and Harrison, R E (2010) A proposed construction design change management tool to aid in making informed design decisions. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Hinze, J; Pedersen, C and Fredley, J (1998) Identifying root causes of construction injuries. Journal of Construction Engineering and Management, 124(1), pp. 67-71. ISSN 0733-9364

Hlatshwayo, T N s (2024) Enabling legislative coherence in the Eswatini construction industry. PhD thesis, Nelson Mandela University, South Africa.

Hollar, D A (2011) Predicting preliminary engineering costs for highway projects. PhD thesis, North Carolina State University, USA.

Hollick, F; Humphrey, D; Oreszczyn, T; Elwell, C and Huebner, G (2024) Building energy use in COVID-19 lockdowns: Did much change? Buildings & Cities, 5(1), pp. 182-198. ISSN 2632-6655

Holloway, S S (2009) When does the network organizational form fail? Examining the impact of project characteristics on organizational structure and performance. PhD thesis, University of Oregon, USA.

Hooper, M (2015) BIM anatomy II: Standardisation needs & support systems. PhD thesis, Lund University, Sweden.

Hosny, F.; El-Damaty, M.; Mantha, B. R. K. and Abu Dabous, S. (2026) Analysis and modeling of delays during construction handover stage for building projects: A case study of United Arab Emirates. International Journal of Building Pathology and Adaptation, 44(3), pp. 658-684. ISSN 2398-4708

Hosny, O A (1991) An intelligent decision support system for construction planning and scheduling. PhD thesis, University of Missouri - Rolla, USA.

Hosseini, A.; Niknam, M.; Shafaat, A. and Fathi, A. (2026) A unified ontology framework for cross-domain integration of BIM, IoT, and maintenance services in smart facility management. Engineering, Construction and Architectural Management, 33(3), pp. 1784-1812. ISSN 0969-9988

Hosseini, A (2019) Data-driven modeling of in-service performance of flexible pavements, using life-cycle information. PhD thesis, Temple University, USA.

Hosseini, M R; Martek, I; Papadonikolaki, E; Sheikhkhoshkar, M; Banihashemi, S and Arashpour, M (2018) Viability of the BIM manager enduring as a distinct role: Association rule mining of job advertisements. Journal of Construction Engineering and Management, 144(9): 04018085, ISSN 0733-9364

Hou, H (2023) Understanding building and urban environment interactions: an integrated framework for building occupancy modelling. PhD thesis, Imperial College London, UK.

Hou, H; Lai, J H K; Wu, H and Wang, T (2024) Digital twin application in heritage facilities management: Systematic literature review and future development directions. Engineering, Construction and Architectural Management, 31(8), pp. 3193-3221. ISSN 0969-9988

Hou, J-H (2006) Object modeling and proper abstractions: The case of stair design. DDes thesis, Harvard University, USA.

Howard, Robert W (2021) Of incentive, bias, and behaviour: an empirical economic investigation into project delivery constructs influencing the adoption of building information modelling. PhD thesis, University College London, UK.

Howes, R (1983) Project management control utilising innovative forecasting and computerised data bases. PhD thesis, Brunel University, UK.

Hoxha, V (2020) Measuring embodied CO2 emission in construction materials in Kosovo apartments. International Journal of Building Pathology and Adaptation, 38(3), pp. 405-421. ISSN 23984708

Hsie, M (1994) Computer-aided acceptance planning: Generating quality acceptance parameters and stratified sampling plans through neural network learning ability and CAD modeling. PhD thesis, Purdue University, USA.

Hsu, C L; Wang, J T and Huang, Y H (2023) A functional element-naming approach for BIM elements in building envelope systems. Journal of Construction Engineering and Management, 149(6): 04023035, ISSN 0733-9364

Hsu, D (2014) Improving energy benchmarking with self-reported data. Building Research & Information, 42(5), pp. 641-656. ISSN 0961-3218

Hu, M and Milner, D (2021) Factors influencing existing medium-sized commercial building energy retrofits to achieve the net zero energy goal in the United States. Building Research & Information, 49(5), pp. 525-542. ISSN 0961-3218

Hu, M; Nippala, E; Kallioharju, K and Pelsmakers, S (2022) Monte Carlo simulation approach to understand the cost variance for energy retrofit projects: Comparative study of Finland and the United States. Construction Management and Economics, 40(3), pp. 207-222. ISSN 01446193

Hu, Xiaoqiang (2023) New approaches to improving highway design, safety, and visual presentation. PhD thesis, Purdue University, USA.

Huang, Q; Chen, Y; Li, Y; Liu, S; Fan, Z; Chen, X and Chen, J (2026) Maco: An open-image data set with multiannotation strategies for building material counting. Journal of Construction Engineering and Management, 152(4): 04026008, ISSN 0733-9364

Huang, J (2020) Infrastructure, the economy and policy. PhD thesis, University of Oxford, UK.

Huang, J; Abadi, M and Yeow, J (2024) Policy implications for factors of steel reuse in circular construction supply chains: A system thinking perspective. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Huang, Y L (2008) The pricing of conditional performance guarantees with risky collateral. Construction Management and Economics, 26(9), pp. 967-978. ISSN 1466433X

Huebner, G M; Fell, M J and Watson, N E (2021) Improving energy research practices: Guidance for transparency, reproducibility and quality. Buildings & Cities, 2(1), pp. 1-20. ISSN 2632-6655

Hui, E C M (2006) Intra-urban residential mobility and property markets: Theory and evidence. Journal of Financial Management of Property and Construction, 11(2), pp. 117-130. ISSN 1366-4387

Hulls, P M (2022) The epidemiology of health and wellbeing in the workplace: managing and measuring occupational stress and behavioural factors in a male-dominated industry. PhD thesis, University of Bristol, UK.

Husain, S H; Shahruddin, S; Norazman, N; Salim, N A and Mustaffa, M (2025) A systematic literature review on formulating the employability skill set for entry-level building surveyors. International Journal of Construction Management, 25(14), pp. 1660-1674. ISSN 1562-3599

Hussain, M A D (2001) Value engineering expert system in suburban highway design (VEESSHD). PhD thesis, University of Pittsburgh, USA.

Hutchings, Sally J (2023) An investigation of methods used to estimate the future burden of disease due to occupation. PhD thesis, University of Manchester, UK.

Huuhka, S (2016) Vacant residential buildings as potential reserves: A geographical and statistical study. Building Research & Information, 44(8), pp. 816-839. ISSN 0961-3218

Huuhka, S and Lahdensivu, J (2016) Statistical and geographical study on demolished buildings. Building Research & Information, 44(1), pp. 73-96. ISSN 0961-3218

Huynh, N. M.; Bui, P. T.; Le-Hoai, L. and Tang, M. N. (2026) Prioritizing actions to mitigate causes of material waste in construction using quality function deployment. Construction Economics and Building, 26(2), ISSN 2204-9029

Hwang, B G (2006) Development of a performance measurement system for the delivery of pharmaceutical capital facility projects. PhD thesis, University of Texas at Austin, USA.

Hwang, B G; Thomas, S R; Haas, C T and Caldas, C H (2009) Measuring the impact of rework on construction cost performance. Journal of Construction Engineering and Management, 135(3), pp. 187-198. ISSN 0733-9364

Ibbs, C W; Kwak, Y H; Ng, T and Murat Odabasi, A (2003) Project delivery systems and project change: Quantitative analysis. Journal of Construction Engineering and Management, 129(4), pp. 382-387. ISSN 0733-9364

Ibrahim, M N (2022) Risk management in construction of megahousing projects in Egypt. PhD thesis, London South Bank University, UK.

Ibrahim, Y M; Kaka, A P; Aouad, G and Kagioglou, M (2008) As-built documentation of construction sequence by integrating virtual reality with time-lapse movies. Architectural Engineering and Design Management, 4(2), pp. 73-84. ISSN 1745-2007

Ibrahim Mahmoud, M M (2005) An xml initiative of transferring architectural information to the construction site based on the BIM object concept. PhD thesis, Illinois Institute of Technology, USA.

Igwe, U S; Mohamed, S F; Dzahir, M A M; Yusof, Z M and Khiyon, N A (2022) Towards a framework of automated resource model for post contract cost control of construction projects. International Journal of Construction Management, 22(16), pp. 3088-3097. ISSN 1562-3599

Ikudayisi, A E and Adegun, O B (2025) Pathways for green building acceleration in fast-growing countries: A case study on Nigeria. Built Environment Project and Asset Management, 15(3), pp. 450-466. ISSN 2044-124X

Ilgın, H E (2022) Interrelations of slenderness ratio and main design criteria in supertall buildings. International Journal of Building Pathology and Adaptation, 41(6), pp. 139-161. ISSN 23984708

Ilhan, B and Yobas, B (2019) Measuring construction for social, economic and environmental assessment. Engineering, Construction and Architectural Management, 26(5), pp. 746-765. ISSN 0969-9988

Iliescu, S (2000) A case-based reasoning approach to the designing of building envelopes. PhD thesis, Concordia University, Canada.

Illankoon, Illankoon Mudiyanselage Chethana Sanathani (2018) A life-cycle cost model for green commercial office buildings with optimal green star credits. PhD thesis, Western Sydney University, Australia.

Imani, E and Asefi, M (2021) Empirical investigation of factors that enhance development of technology in design process improvement in architecture education: Analyses of students' views. Engineering, Construction and Architectural Management, 28(10), pp. 3164-3189. ISSN 0969-9988

Ingraham, A T (2001) Bidder-auctioneer cheating in sealed-bid auctions. PhD thesis, University of Maryland, College Park, USA.

Inti, S (2016) A decision making approach for selection of sustainable pavements in Texas by integrating life cycle cost analysis (LCCA), life cycle assessment (LCA) of environmental and social impacts. PhD thesis, University of Texas at El Paso, USA.

Ioannou, P G and Carr, R I (1988) Advanced building technology matrix system. Journal of Construction Engineering and Management, 114(4), pp. 517-531. ISSN 0733-9364

Irajifar, L; Sipe, N and Alizadeh, T (2016) The impact of urban form on disaster resiliency: A case study of Brisbane and Ipswich, Australia. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 259-275. ISSN 1759-5916

Isaacs, N and Hills, A (2014) Understanding the newzealand non-domestic building stock. Building Research & Information, 42(1), pp. 95-108. ISSN 0961-3218

Isied, M M (2023) Critical assessment of asphalt mixture design procedures and asphalt mixture classification systems. PhD thesis, North Carolina State University, USA.

Isikdag, U (2006) Towards the implementation of building information models in geospatial context. PhD thesis, University of Salford, UK.

Islam, R; Chowdhury, S; Jannat, N and Paul, P (2022) Carbon footprint evaluation of local dwellings in Bangladesh towards low carbon society. Built Environment Project and Asset Management, 12(3), pp. 433-446. ISSN 2044-124X

Ismail, I A (2014) Financial cash flow determinants of company failure in the construction industry. PhD thesis, University of Michigan, USA.

Ismail, Noor Akmal Adillah Binti (2017) Construction cost estimating incorporating building information modelling in the Malaysian construction industry. PhD thesis, Queensland University of Technology, Australia.

Ismail, Z A (2014) System development toward effective maintenance management practices. Built Environment Project and Asset Management, 4(4), pp. 406-422. ISSN 2044-124X

Ismail, Z A (2019) Developing a maintenance index framework for heritage concrete buildings. International Journal of Building Pathology and Adaptation, 37(5), pp. 510-527. ISSN 23984708

Ismail, Z A (2019) An integrated computerised maintenance management system (I-CMMS) for IBS building maintenance. International Journal of Building Pathology and Adaptation, 37(3), pp. 326-343. ISSN 23984708

Ismail, Z A (2021) Implementation of BIM technology for knowledge transfer in IBS building maintenance projects. International Journal of Building Pathology and Adaptation, 39(1), pp. 115-134. ISSN 23984708

Ismail, Z A and Motawa, I (2019) Integrating CMMS, expert system, and BIM for IBS building maintenance. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Ismail, Z A B (2021) Towards a BIM-based approach for improving maintenance performance in IBS building projects. Engineering, Construction and Architectural Management, 28(5), pp. 1468-1490. ISSN 0969-9988

Ismail, Z-A (2017) Maintenance management system (MMS) to support facilities management at Malaysian polytechnic. Smart and Sustainable Built Environment, 6(1), pp. 19-33. ISSN 2046-6099

Isuri Anuradha, A; Soorige, D and Geekiyanage, D (2021) Comparative study on life cycle assessment of buildings in developed countries and Sri Lanka. Built Environment Project and Asset Management, 11(2), pp. 304-329. ISSN 2044-124X

Ive, G (2006) Re-examining the costs and value ratios of owning and occupying buildings. Building Research & Information, 34(3), pp. 230-245. ISSN 0961-3218

Jaafari, A; Manivong, K K and Chaaya, M (2001) Vircon: Interactive system for teaching construction management. Journal of Construction Engineering and Management, 127(1), pp. 66-75. ISSN 0733-9364

Jackson, M (2007) Model development for the adoption of technology: electronic commerce in the construction industry. PhD thesis, University of Wolverhampton, UK.

Jacobs, G F (2010) Review of lean construction conference proceedings and relationship to the Toyota production system framework. PhD thesis, Colorado State University, USA.

Jacques de Sousa, L; Poças Martins, J and Sanhudo, L (2024) Predicting construction project compliance with machine learning model: case study using Portuguese procurement data. Engineering, Construction and Architectural Management, 31(13), pp. 285-302. ISSN 0969-9988

Jacques de Sousa, L; Poças Martins, J; Sanhudo, L and Santos Baptista, J (2024) Automation of text document classification in the budgeting phase of the construction process: A systematic literature review. Construction Innovation, 24(7), pp. 292-318. ISSN 1471-4175

Jadidoleslami, S. and Saghatforoush, E. (2026) Unveiling interdependencies across phases: MICMAC analysis of BIM and AI integration challenges in construction. Architectural Engineering and Design Management, 22(4), pp. 1188-1210. ISSN 1745-2007

Jafari, A and Akhavian, R (2019) Driving forces for the US residential housing price: A predictive analysis. Built Environment Project and Asset Management, 9(4), pp. 515-529. ISSN 2044-124X

Jafary, P; Shojaei, D; Rajabifard, A and Ngo, T (2024) BIM and real estate valuation: Challenges, potentials and lessons for future directions. Engineering, Construction and Architectural Management, 31(4), pp. 1642-1677. ISSN 0969-9988

Jaillon, L C (2009) The evolution of the use of prefabrication techniques in Hong Kong construction industry. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Jalali, Farhang (2020) Quantifying pavement preservation performance using probabilistic deterioration modeling. PhD thesis, Auburn University, USA.

Jaradat, S; Whyte, J and Luck, R (2013) Professionalism in digitally mediated project work. Building Research & Information, 41(1), pp. 51-59. ISSN 0961-3218

Jarkas, A M and Horner, R M W (2015) Creating a baseline for labour productivity of reinforced concrete building construction in Kuwait. Construction Management and Economics, 33(8), pp. 625-639. ISSN 01446193

Jarrah, R T (2007) Planning for, facilitating, and evaluating design effectiveness. PhD thesis, University of Texas at Austin, USA.

Jaselskis, E J (1988) Achieving construction project success through predictive discrete choice models. PhD thesis, University of Texas at Austin, USA.

Jaselskis, E J and El-Misalami, T (2003) Implementing radio frequency identification in the construction process. Journal of Construction Engineering and Management, 129(6), pp. 680-688. ISSN 0733-9364

Jayaraj, S; Doerfel, M L and Williams, T (2022) Clique to win: Impact of cliques, competition, and resources on team performance. Journal of Construction Engineering and Management, 148(7): 04022047, ISSN 0733-9364

Jen, H (2005) Web-based construction process simulation framework. PhD thesis, Purdue University, USA.

Jeong, H S; Abraham, D M and Lew, J J (2004) Evaluation of an emerging market in subsurface utility engineering. Journal of Construction Engineering and Management, 130(2), pp. 225-234. ISSN 0733-9364

Ji, A; Xue, X; Zhang, L; Luo, X and Man, Q (2025) A transformer-based deep learning method for automatic pixel-level crack detection and feature quantification. Engineering, Construction and Architectural Management, 32(4), pp. 2455-2486. ISSN 0969-9988

Ji, Wenying (2018) Simulation-based analytics for fabrication quality-associated decision support. PhD thesis, University of Alberta, Canada.

Jia, M and Zhao, L (2025) Evolutionary analysis of information-based construction management promotion using a government-enterprise evolutionary game model. Engineering, Construction and Architectural Management, 32(1), pp. 349-373. ISSN 0969-9988

Jian, I Y; Chan, E H W and Yao, T Y P (2021) ICT as a solution for the revitalization of public open space in private developments. Built Environment Project and Asset Management, 11(3), pp. 440-453. ISSN 2044-124X

Jiang, S and Jia, J (2026) Bolstering the initiative of construction project members: A self-determination lens combining project social media use. Engineering, Construction and Architectural Management, 33(1), pp. 452-476. ISSN 0969-9988

Jiang, S; Zhang, J; Shi, J and Wu, Y (2026) Adaptive information retrieval for enhanced building safety management leveraging BIM. Engineering, Construction and Architectural Management, 33(1), pp. 336-360. ISSN 0969-9988

Jiang, H; Lin, P and Qiang, M (2016) Public-opinion sentiment analysis for large hydro projects. Journal of Construction Engineering and Management, 142(2): 05015013, ISSN 0733-9364

Jiang, W; Martek, I; Hosseini, M R and Chen, C (2021) Political risk management of foreign direct investment in infrastructure projects: Bibliometric-qualitative analyses of research in developing countries. Engineering, Construction and Architectural Management, 28(1), pp. 125-153. ISSN 0969-9988

Jiang, Y (2020) Determination of elevations for excavation operations using drone technologies. PhD thesis, Marquette University, USA.

Jiang, Z; Han, Y; Cheng, Y; Wang, Z and Meng, H (2025) An improved yolov8-dyhead-wiseiou model for positioning and counting detection of grouting sleeves in a prefabricated wall. Journal of Construction Engineering and Management, 151(4): 04025016, ISSN 0733-9364

Jiang, Ziang (2025) Advancing scan-vs-BIM in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jiang, Ziang (2025) Advancing scan-vs-bim in progress monitoring of infrastructure construction. PhD thesis, University of New South Wales, Australia.

Jimenez-Roa, Lisandro Arturo (2020) Data-driven damage detection for bridges through vibration structural health monitoring. EngD thesis, University of Twente, Netherlands.

Johansson, M (2016) From BIM to VR – the design and development of BIMXplorer. PhD thesis, Chalmers University of Technology, Sweden.

Jones, K; Brydson, H; Ali, F and Cooper, J (2013) Assessing vulnerability, resilience and adaptive capacity of a UK social landlord. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 287-296. ISSN 1759-5916

Jones, M M (2024) Exploring accessibility, usability, and relevance: A case study of Wyoming's construction workforce training program. PhD thesis, University of Wyoming, USA.

Joseph, S; Ralwala, A; Wachira-Towey, I and Mutisya, E (2023) Sustainable construction transition (SCT) policy regime in Kenya. Journal of Construction Business and Management, 6(1), pp. 1-16. ISSN 2521-0165

Joseph, V R and Mustaffa, N K (2023) Carbon emissions management in construction operations: A systematic review. Engineering, Construction and Architectural Management, 30(3), pp. 1271-1299. ISSN 0969-9988

Jrade, A (2004) Integrated conceptual cost estimating and life cycle costing system for building projects. PhD thesis, Concordia University, Canada.

Jung, Y and Kang, S (2007) Knowledge-based standard progress measurement for integrated cost and schedule performance control. Journal of Construction Engineering and Management, 133(1), pp. 10-21. ISSN 0733-9364

Jung, Y J (2007) Subsurface utility engineering for highway projects: A study of utility impact rating and benefit-cost analysis. PhD thesis, Pennsylvania State University, USA.

Kadry, M; Osman, H and Georgy, M (2017) Causes of construction delays in countries with high geopolitical risks. Journal of Construction Engineering and Management, 143(2): 04016095, ISSN 0733-9364

Kaka, A and Lewis, J (2003) Development of a company-level dynamic cash flow forecasting model. Construction Management and Economics, 21(7), pp. 693-705. ISSN 01446193

Kaka, A P; Lewis, J and Petros, H (2003) The effects of the variability of project planning on cost commitment curves: A case study. Engineering, Construction and Architectural Management, 10(1), pp. 15-26. ISSN 0969-9988

Kallman, J W (1998) Loss control project decision models for the construction industry. PhD thesis, University of Wisconsin - Madison, USA.

Kamath, M V; Prashanth, S; Kumar, M and Tantri, A (2024) Machine-learning-algorithm to predict the high-performance concrete compressive strength using multiple data. Journal of Engineering, Design and Technology, 22(2), pp. 532-560. ISSN 1726-0531

Kaminsky, J A (2018) National culture shapes private investment in transportation infrastructure projects around the globe. Journal of Construction Engineering and Management, 144(2): 04017098, ISSN 0733-9364

Kaminsky, J A (2022) Improving public-private partnerships for renewable electricity infrastructure in lower- and middle-income countries. Journal of Construction Engineering and Management, 148(5): 04022012, ISSN 0733-9364

Kan, F K and Khalid, A G (2022) The decision-making behaviour of public procurement officers: An interplay between procedural rationality and groupthink bias. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Kanellopoulos, G (2022) External fire spread from timber lined compartments. PhD thesis, University of Edinburgh, UK.

Kang, H-Y (2001) Web-based four-dimensional visualization for constuction scheduling. PhD thesis, Texas A&M University, USA.

Kang, L; Liu, S; Zhang, H and Gong, D (2021) Person anomaly detection-based videos surveillance system in urban integrated pipe gallery. Building Research & Information, 49(1), pp. 55-68. ISSN 0961-3218

Kang, M M K (2014) Development of an expert system for sustainable pavement preservation strategies (es2p2s). PhD thesis, University of Wisconsin - Madison, USA.

Kang, Y; O'Brien, W J; Dai, J; Mulva, S P; Thomas, S P; Chapman, R E and Butry, D (2013) Interaction effects of information technologies and best practices on construction project performance. Journal of Construction Engineering and Management, 139(4), pp. 361-371. ISSN 0733-9364

Kang, Y; Siddiqui, S; Suk, S J; Chi, S and Kim, C (2017) Trends of fall accidents in the U.S. Construction industry. Journal of Construction Engineering and Management, 143(8): 04017043, ISSN 0733-9364

Kannan, G and Vorster, M (2000) Development of an experience database for truck loading operations. Journal of Construction Engineering and Management, 126(3), pp. 201-209. ISSN 0733-9364

Kanoglu, A and Arditi, D (2001) A computer-based information system for architectural design offices. Construction Innovation, 1(1), pp. 15-29. ISSN 1471-4175

Kapindula, M G and Kaliba, C (2022) The effects of external debt servicing on infrastructure spending: A case of Zambia. International Journal of Construction Management, 22(1), pp. 41-50. ISSN 1562-3599

Kapogiannis, G; Palaios, P and Sawhney, A (2024) Digital construction led growth asymmetries in Europe: The need for collaborative culture. Construction Economics and Building, 24(1-2), pp. 50-76. ISSN 2204-9029

Kappia, J G (2006) Career dynamics within the construction industry: a trade and craft perspective. PhD thesis, Loughborough University, UK.

Kar, S and Jha, K N (2023) Examining the effect of material management practices on material availability and waste reduction in construction projects. Journal of Construction Engineering and Management, 149(8): 04023065, ISSN 0733-9364

Karacigan, A; Cağlayan, S; Tezel, A and Özorhon, B (2025) Strategic roadmap to achieve successful implementation of blockchain technology in construction contract management. Journal of Construction Engineering and Management, 151(11): 04025185, ISSN 0733-9364

Karadag, I; Güzelci, O Z and Alaçam, S (2023) Edu-ai: A twofold machine learning model to support classroom layout generation. Construction Innovation, 23(4), pp. 898-914. ISSN 1471-4175

Karaiskos, P; Munian, Y; Martinez-Molina, A and Alamaniotis, M (2026) Indoor air quality prediction modeling for a naturally ventilated fitness building using rnn-LSTM artificial neural networks. Smart and Sustainable Built Environment, 15(1), pp. 384-406. ISSN 2046-6099

Karasu, T; Aaltonen, K and Haapasalo, H (2023) The interplay of IPD and BIM: A systematic literature review. Construction Innovation, 23(3), pp. 640-664. ISSN 1471-4175

Karhu, V (2001) A generic construction process modelling method. PhD thesis, KTH Royal Institute of Technology, Sweden.

Karimi, H (2017) Quantitative analysis of the impact of craft labor availability on construction project performance. PhD thesis, University of Kentucky, USA.

Karimi, H; Taylor, T R B; Dadi, G B; Goodrum, P M and Srinivasan, C (2018) Impact of skilled labor availability on construction project cost performance. Journal of Construction Engineering and Management, 144(7): 04018057, ISSN 0733-9364

Karimi, H; Taylor, T R B and Goodrum, P M (2017) Analysis of the impact of craft labour availability on North American construction project productivity and schedule performance. Construction Management and Economics, 35(6), pp. 368-380. ISSN 01446193

Karimi, H; Taylor, T R B; Goodrum, P M and Srinivasan, C (2016) Quantitative analysis of the impact of craft worker availability on construction project safety performance. Construction Innovation, 16(3), pp. 307-322. ISSN 1471-4175

Karimi Kivi, H; Rezaee, R; Peyravi, M and Ahmadi Marzaleh, M (2025) Components and factors affecting adolescent resilience promotion education in disasters: A systematic review. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 157-172. ISSN 1759-5908

Kashiwagi, D T (1991) Development of a performance based design/procurement system for nonstructural facility systems. PhD thesis, Arizona State University, USA.

Kashiwagi, D T; Slater, C and Kashiwagi, M (2002) 'Just in time' information for performance based systems. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Kasim, N B (2008) Improving materials management on construction projects. PhD thesis, Loughborough University, UK.

Kassem, M; Dawood, N and Mitchell, D (2012) A decision support system for the selection of curtain wall systems at the design development stage. Construction Management and Economics, 30(12), pp. 1039-1053. ISSN 1466433X

Kauffold, P V (1977) Critical resource allocation in stochastic project networks. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kawal, D E (1970) A systems model of a construction firm. PhD thesis, Iowa State University, USA.

Keane, P J (1994) A computer-aided systematic approach to time delay analysis for extension of time claims on construction projects. PhD thesis, Loughborough University, UK.

Kedarisetty, S (2025) Pavement management systems in local governments. PhD thesis, University of California, Davis, USA.

Kehily, D (2016) Leveraging building information modelling to address the barriers that prevent the widespread adoption of life cycle costing by quantity surveyors. PhD thesis, University of Salford, UK.

Kere, K J (2023) Probabilistic model development and risk management strategies for pipelines with anomalies. PhD thesis, Marquette University, USA.

Kern, A P; Postay, R; Schneck, E R; Mancio, M; González, M A S and Guerra, G (2021) Cost and environmental impacts reduction through building compactness. Engineering, Construction and Architectural Management, 28(4), pp. 1176-1195. ISSN 0969-9988

Keskin, B (2021) A building information modeling (BIM)-centric digital ecosystem for smart airport life cycle management. PhD thesis, Syracuse University, USA.

Khajuria, A (1994) Quality assurance of concrete using a hybrid knowledge-based expert system. PhD thesis, Rutgers State University of New Jersey, School of Graduate Studies, USA.

Khalafallah, A; Kartam, N and Razeq, R A (2019) Bilevel standards-compliant platform for evaluating building contractor safety. Journal of Construction Engineering and Management, 145(10): 4019054, ISSN 0733-9364

Khalfan, M and Raja, N (2005) Improving construction process through integration and concurrent engineering. Construction Economics and Building, 5(1), pp. 58-66. ISSN 2204-9029

Khan, K I A (2016) Management of information complexity using system dynamics for small and medium-sized enterprises (SMEs) on construction projects. PhD thesis, University of Reading, UK.

Khan, K I A; Flanagan, R and Lu, S L (2015) Managing the complexity of information flow for construction small and medium-sized enterprises (csmes) using system dynamics and collaborative technologies. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Khan, K I A; Flanagan, R and Lu, S-L (2016) Managing information complexity using system dynamics on construction projects. Construction Management and Economics, 34(3), pp. 192-204. ISSN 0144-6193

Khan, M W and Ali, Y (2020) Sustainable construction: Lessons learned from life cycle assessment (LCA) and life cycle cost analysis (LCCA). Construction Innovation, 20(2), pp. 191-207. ISSN 1471-4175

Khan, S; Panuwatwanich, K and Usanavasin, S (2024) Integrating building information modeling with augmented reality: Application and empirical assessment in building facility management. Engineering, Construction and Architectural Management, 31(7), pp. 2809-2828. ISSN 0969-9988

Khankeh, H; Farrokhi, M; Saatchi, M; Pourebrahimi, M; Roudini, J; Rahmatali Khazaee, A; Jenabi Ghods, M; Sepahvand, E; Ranjbar, M and Hosseinabadi-Farahani, M (2025) Influencing factors on building and improving social trust in emergency and disaster relief efforts: A systematic review. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 129-142. ISSN 1759-5908

Khatibi, A.; Sedigh Rezvani, M.; Alavi, P. and Rahmati, S. (2026) A holistic fire risk-to-resilience framework for the historic bazaars (case study: The Zanjan bazaar, Iran). International Journal of Disaster Resilience in the Built Environment, 17(4), pp. 505-526. ISSN 1759-5908

Khatibi, H; Wilkinson, S; Baghersad, M; Heiman, D; Ramli, H; Suhatril, M; Javanmardi, A and Ghaedi, K (2021) The resilient-smart city development: A literature review and novel frameworks exploration. Built Environment Project and Asset Management, 11(4), pp. 493-510. ISSN 2044-124X

Khatibi, H; Wilkinson, S; Heiman, D; Baghersad, M; Ghaedi, K and Javanmardi, A (2022) Indicators bank for smart and resilient cities: Design of excellence. Built Environment Project and Asset Management, 12(1), pp. 5-19. ISSN 2044-124X

Khoa, V. D.; Chinda, T. and Nguyen, N. H. (2026) Knowledge management process to enhance construction competitiveness in the long term: System dynamics modelling approach. International Journal of Construction Management, 26(9), pp. 1960-1977. ISSN 1562-3599

Khodabakhshian, Ania (2023) Machine learning for risk management in construction projects. PhD thesis, Politecnico di Milano, Italy.

Khorrami Shad, H; Tak Wing Yiu, K; Lovreglio, R and Feng, Z (2024) State-of-the-art analysis of the integration of augmented reality with construction technologies to improve construction safety. Smart and Sustainable Built Environment, 13(6), pp. 1434-1449. ISSN 2046-6099

Khosrowshahi, F (2001) Project cash flow forecasting: A mathematical approach. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Khoury, H M (2009) Context-aware information access and retrieval for rapid on-site decision making in construction, inspection and maintenance of constructed facilities. PhD thesis, University of Michigan, USA.

Kifokeris, D and Tezel, A (2025) Blockchain and lean construction: An exploration of bidirectional synergies and interactions. Architectural Engineering and Design Management, 21(1), pp. 171-189. ISSN 1745-2007

Kim, D.; Yang, J.; Lee, D.; Lee, D.; Rahimian, F. and Park, C. (2026) Blockchain-enhanced computer vision approach for remote safety inspection in construction. Engineering, Construction and Architectural Management, 33(3), pp. 1907-1931. ISSN 0969-9988

Kim, S; Makhmalbaf, A and Shahandashti, M (2025) Forecasting the architecture billings index (abi) using machine learning predictive models. Engineering, Construction and Architectural Management, 32(8), pp. 5371-5393. ISSN 0969-9988

Kim, A (2024) A comprehensive approach to industrial decarbonization efforts within the building materials sector. PhD thesis, University of California, Davis, USA.

Kim, B S and Hong, T (2012) Revised case-based reasoning model development based on multiple regression analysis for railroad bridge construction. Journal of Construction Engineering and Management, 138(1), pp. 154-162. ISSN 0733-9364

Kim, C S and Liu, L Y (2007) Cost information model for managing multiple projects. Journal of Construction Engineering and Management, 133(12), pp. 966-974. ISSN 0733-9364

Kim, C-S (2002) An information model for real-time project cost integration. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kim, E (2000) A study on the effective implementation of earned value management methodology. DSc thesis, George Washington University, USA.

Kim, H (2002) Knowledge discovery and machine learning in construction project databases. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kim, I (1994) Data representations in an integrated architectural design environment: Unified data organisation and management. PhD thesis, University of Strathclyde, UK.

Kim, J; Chung, S and Chi, S (2024) Cross-lingual information retrieval from multilingual construction documents using pretrained language models. Journal of Construction Engineering and Management, 150(6): 04024041, ISSN 0733-9364

Kim, J; Hyun, J-Y; Chong, W K and Ariaratnam, S (2017) Understanding the effects of environmental factors on building energy efficiency designs and credits: Case studies using data mining and real-time data. Journal of Engineering, Design and Technology, 15(3), pp. 270-285.

Kim, Jungsoo (2014) Impact of indoor environmental quality (IEQ) factors on occupant evaluation of workspaces. PhD thesis, University of Sydney, Australia.

Kim, K J (1997) Simplified discrete event simulation for heavy construction operations. PhD thesis, University of Texas at Austin, USA.

Kim, K P and Park, K S (2016) Primary BIM dataset for refurbishing flood risk vulnerable housing in the UK. Built Environment Project and Asset Management, 6(4), pp. 365-378. ISSN 2044-124X

Kim, M (2017) Noncontact quality assessment of precast concrete elements using 3D laser scanning and building information modeling. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Kim, M P and Adams, K (1989) An expert system for construction contract claims. Construction Management and Economics, 7(3), pp. 249-262. ISSN 01446193

Kim, S (1990) Development of risk assessment decision support system for hazardous materials movement. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Kim, T and Chi, S (2019) Accident case retrieval and analyses: Using natural language processing in the construction industry. Journal of Construction Engineering and Management, 145(3): 04019004, ISSN 0733-9364

Kim, Y W and Kim, S C (2011) Cost analysis of information technology-assisted quality inspection using activity-based costing. Construction Management and Economics, 29(2), pp. 163-172. ISSN 1466433X

Kindangen, J I (1996) Artificial neural networks and naturally ventilated buildings. Building Research & Information, 24(4), pp. 203-208. ISSN 0961-3218

Kishk, M; Al-Hajj, A and Pollock, R (2003) Effective measurement and visualization of whole-life costs of building elements. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Kishk, M; Al-Hajj, A; Pollock, R and Aouad, G F (2002) A generic database for whole life costing applications in construction. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Kishk, M; Al-Hajj, A; Pollock, R and Aouad, G F (2003) Effective feedback of whole-life data to the design process. Journal of Financial Management of Property and Construction, 8(2), pp. 89-98. ISSN 1366-4387

Kishk, M; Laing, R and Edge, M (2006) An extended whole-life application for the selection of hospital finishes. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kishk, M; Laing, R; Scott, J and Edge, M (2007) A generic finishes database for healthcare facilities. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Kishk, M; Pollock, R; Atta, J and Power, L (2005) A structured model for performance assessment in property management. Journal of Financial Management of Property and Construction, 10(3), pp. 159-170. ISSN 1366-4387

Kittinaraporn, W; Tuprakay, S and Prasittisopin, L (2022) Effective modeling for construction activities of recycled aggregate concrete using artificial neural network. Journal of Construction Engineering and Management, 148(3): 04021206, ISSN 0733-9364

Kiu, M S; Chia, F C and Wong, P F (2022) Exploring the potentials of blockchain application in construction industry: A systematic review. International Journal of Construction Management, 22(15), pp. 2931-2940. ISSN 1562-3599

Kiwan, M S A A (1994) Integration of building design and construction information: A neutral object-oriented model. PhD thesis, University of Dundee, UK.

Kiziltas, S (2008) An automated approach for developing integrated model-based construction project histories to support estimation of activity production rates. PhD thesis, Carnegie Mellon University, USA.

Kiziltas, S and Akinci, B (2009) Contextual information requirements of cost estimators from past construction projects. Journal of Construction Engineering and Management, 135(9), pp. 841-852. ISSN 0733-9364

Klarin, A and Xiao, Q (2024) Automation in architecture, engineering and construction: A scientometric analysis and implications for management. Engineering, Construction and Architectural Management, 31(8), pp. 3308-3334. ISSN 0969-9988

Kleemann, F; Lederer, J; Aschenbrenner, P; Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(1), pp. 51-62. ISSN 0961-3218

Koc, K; Budayan, C; Ekmekcioǧlu, Ö and Tokdemir, O B (2024) Predicting cost impacts of nonconformances in construction projects using interpretable machine learning. Journal of Construction Engineering and Management, 150(1): 04023143, ISSN 0733-9364

Koc, K; Ekmekcioğlu, Ö and Gurgun, A P (2023) Prediction of construction accident outcomes based on an imbalanced dataset through integrated resampling techniques and machine learning methods. Engineering, Construction and Architectural Management, 30(9), pp. 4486-4517. ISSN 0969-9988

Koch, C and Beemsterboer, S (2017) Making an engine: Performativities of building information standards. Building Research & Information, 45(6), pp. 596-609. ISSN 0961-3218

Koch, C and Haugen, T I (2004) An it R&D-programme without new code?! State driven it development in Denmark. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Koch, C and Vogelius, P (2006) Evaluation of web and pda-based quality assurance system on a building site. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Koch, C H G H J K (2018) Information standards: A hinder or an enabler for innovation? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Kodikara, G W (1990) Data flow in building contractor organisations. PhD thesis, Loughborough University, UK.

Kodikara, G W and McCaffer, R (1993) Flow of estimating data in Sri Lankan building contractor organizations. Construction Management and Economics, 11(5), pp. 341-346. ISSN 01446193

Kong, Z; Ma, H; Lv, K and Shi, J J (2023) Liability of foreignness in public-private partnership projects. Journal of Construction Engineering and Management, 149(9): 04023085, ISSN 0733-9364

Konno, Y (2014) An empirical analysis of the exit of SMEs tendering for public works in the Japanese construction industry. Journal of Financial Management of Property and Construction, 19(2), pp. 101-116. ISSN 1366-4387

Koo, T K and Tiong, R (1993) An expert system for assessing the performance of RC beams and slabs. Construction Management and Economics, 11(5), pp. 347-357. ISSN 01446193

Kordi, N E; Belayutham, S; Ibrahim, C K I C and Zulkifli, A R (2019) The attributes of social sustainability in construction: A theoretical exploration. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Kosovac, B (2007) A framework for managing information from heterogeneous, distributed, and autonomous sources in the architecture, engineering, construction, and facilities management domain. PhD thesis, University of British Columbia, Canada.

Koushki, P A; Al-Rashid, K and Kartam, N (2005) Delays and cost increases in the construction of private residential projects in Kuwait. Construction Management and Economics, 23(3), pp. 285-294. ISSN 01446193

Kraiem, Z M (1988) DISCON: An expert system for construction contract disputes. PhD thesis, University of Colorado at Boulder, USA.

Krainer, Christiane Wagner Mainardes (2021) Model of social capital accumulation in civil construction companies. PhD thesis, Universidade Tecnológica Federal do Paraná, Brazil.

Krajňák, M. (2026) Property tax trends in the Czech Republic. Journal of Financial Management of Property and Construction, 31(2), pp. 173-199. ISSN 1366-4387

Krishnamoorthi, S and Raphael, B (2022) A review of methodologies for performance evaluation of automated construction processes. Built Environment Project and Asset Management, 12(5), pp. 719-737. ISSN 2044-124X

Krystallis I, D P P A D F (2013) Supporting future-proof healthcare design by narrowing the design space of solutions using building information modelling. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Kuittinen, M and Häkkinen, T (2020) Reduced carbon footprints of buildings: New Finnish standards and assessments. Buildings & Cities, 1(1), pp. 182-197. ISSN 2632-6655

Kumar, S; Singh, L K; Roy, L B; Kumar, R and Lal, D (2025) Enhancing the sustainability of slope stability in embankment construction by leveraging smart sensors and monitoring systems for data-driven insights. International Journal of Construction Management, 25(16), pp. 2102-2120. ISSN 1562-3599

Kumar, R (2020) Risk management framework for construction projects aligned to actualities. PhD thesis, Indian Institute of Technology Delhi, India.

Kumar, S (2013) Experience-based design review of healthcare facilities using interactive virtual prototypes. PhD thesis, Pennsylvania State University, USA.

Kumar, S (2023) Optimization of sustainability and resilience for transportation projects. PhD thesis, Colorado State University, USA.

Kumar, V (2019) Developing COBie dataset management system (CDMS) to enhance usability of building information model-facilities management information exchange standard. PhD thesis, National University of Singapore, Singapore.

Kumaraswamy, M M (1991) Evaluating the management of construction projects. PhD thesis, Loughborough University, UK.

Kumaraswamy, M M and Dissanayaka, S M (1996) Procurement by objectives. Journal of Construction Procurement, 2(2), pp. 38-51. ISSN 1358-9180

Kumari, P; Reddy, S R N and Yadav, R (2024) Indoor occupancy detection and counting system based on boosting algorithm using different sensor data. Building Research & Information, 52(1-2), pp. 87-106. ISSN 0961-3218

Kuo, Vincent (2019) Latent semantic analysis for knowledge management in construction. DSc(Tech) thesis, Aalto University, Finland.

Kuttantharappel Soman, R (2020) Automated look-ahead schedule generation using linked-data based constraint checking for construction projects. PhD thesis, Imperial College London, UK.

Kylili, A; Georgali, P Z; Christou, P and Fokaides, P (2024) An integrated building information modeling (BIM)-based lifecycle-oriented framework for sustainable building design. Construction Innovation, 24(2), pp. 492-514. ISSN 1471-4175

Kähkönen, K and Rannisto, J (2015) Understanding fundamental and practical ingredients of construction project data management. Construction Innovation, 15(1), pp. 7-23. ISSN 1471-4175

Kärnä, S and Junnonen, J-M (2017) Designers' performance evaluation in construction projects. Engineering, Construction and Architectural Management, 24(1), pp. 154-169. ISSN 0969-9988

Kübelböck, G (2013) Constructing a conceptual framework for market intelligence in the European plant building industry. PhD thesis, University of Gloucestershire, UK.

Labib, Y A M (2017) Lean framework for assessing construction logistics in Jordan. PhD thesis, University of Salford, UK.

Lafuente, E; Strassburger, F; Vaillant, Y and Vilajosana, J (2017) Organizational resilience and performance: An analysis of the relevance of suppliers' trade credit and bank diversification in the Spanish construction industry. Construction Economics and Building, 17(4), pp. 1-19. ISSN 2204-9029

Laishram, B and Sood, R (2024) Challenges in implementation of 7D-BIM for infrastructure asset management: A systematic review. Construction Economics and Building, 24(3), pp. 95-117. ISSN 2204-9029

Laitinen, J (1998) Model based construction process management. PhD thesis, KTH Royal Institute of Technology, Sweden.

Lam, E W M; Chan, A P C; Olawumi, T O; Wong, I and Kazeem, K O (2024) Sustainability concepts in global high-rise residential buildings: A scientometric and systematic review. Smart and Sustainable Built Environment, 13(2), pp. 425-443. ISSN 2046-6099

Lama, Supreet (2023) Improving design briefing with BIM-based concept generation aiming to enhance building project performance. PhD thesis, University of West London, UK.

Lamberti, G; Boghetti, R; Fantozzi, F; Leccese, F and Salvadori, G (2025) Analysing the potential of open hotel review databases for IEQ assessment: A text mining approach. Building Research & Information, 53(1-2), pp. 261-279. ISSN 0961-3218

Lambropoulos, S; Manolopoulos, N and Pantouvakis, J P (1996) Semantic: Smart earthmoving analysis and estimation of cost. Construction Management and Economics, 14(2), pp. 79-92. ISSN 01446193

Lan, Roy Uzoma (2025) Advancing workplace safety through intelligent monitoring: Applications of artificial intelligence and computer vision in high-risk industrial environments. PhD thesis, The University of Texas at San Antonio, USA.

Landes, Drew (2024) Trade, global value chains and power the role of oligopsony, 1995-2020. PhD thesis, The New School, USA.

Larbi, J A; Tang, L C M; Ababio, B K and Antwi-Afari, P (2025) Developing an integrated digital delivery framework for designing and planning construction projects: a review of interoperable digital technologies. International Journal of Construction Management, 25(3), pp. 347-362. ISSN 1562-3599

Larsson, J; Lu, W; Krantz, J and Olofsson, T (2016) Discrete event simulation analysis of product and process platforms: A bridge construction case study. Journal of Construction Engineering and Management, 142(4): 04015097, ISSN 0733-9364

Lau, C H (2019) The global trading activities of consulting engineering firms: managing risk and geographical choice. PhD thesis, University of Oxford, UK.

Le, C; Jeong, H D and Damnjanovic, I (2021) Network theory-driven construction logic knowledge network: Process modeling and application in highway projects. Journal of Construction Engineering and Management, 147(10): 04021261, ISSN 0733-9364

Le, K T (2017) Material inventory control and management system in construction using GIS applications and a "hybrid" tracking system. PhD thesis, Illinois Institute of Technology, USA.

Leblanc, H and Thomson, C (2012) Paradigm interplay to develop a sustainability related knowledge management strategy. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Lee, G (2004) A new formal and analytical process to product modeling (PPM) method and its application to the precast concrete industry. PhD thesis, Georgia Institute of Technology, USA.

Lee, H S; Ryu, H G; Yu, J H and Kim, J J (2005) Method for calculating schedule delay considering lost productivity. Journal of Construction Engineering and Management, 131(11), pp. 1147-1154. ISSN 0733-9364

Lee, H-S (1992) Automated interactive cost estimating system for reinforced concrete building structures. PhD thesis, University of Michigan, USA.

Lee, J; Blumenstein, M; Guan, H and Loo, Y C (2013) Minimising uncertainty in long-term prediction of bridge element. Engineering, Construction and Architectural Management, 20(2), pp. 127-142. ISSN 0969-9988

Lee, J K (2011) Building environment rule and analysis (BERA) language and its application for evaluating building circulation and spatial program. PhD thesis, Georgia Institute of Technology, USA.

Lee, J-R (1997) The object-oriented project system for pavement construction management and visualization. PhD thesis, Ohio State University, USA.

Lee, Jaeho (2007) A methodology for developing bridge condition rating models based on limited inspection records. PhD thesis, Griffith University, Australia.

Lee, S H; Thomas, S R and Tucker, R L (2005) Web-based benchmarking system for the construction industry. Journal of Construction Engineering and Management, 131(7), pp. 790-798. ISSN 0733-9364

Lee, S-H (2001) Discriminant function analysis for categorization of best practices. PhD thesis, University of Texas at Austin, USA.

Lee, S-H (2003) A process model for controlling project productivity of highway construction operations. PhD thesis, University of Florida, USA.

Lee, W (2018) Use of wearable sensors to unveil roles of task demands-personal resources and burnout on performance of construction workers. PhD thesis, University of Washington, USA.

Lee, Y L and Lee, Y (2021) Developing an autonomous psychological behaviour of virtual user to atypical architectural geometry. Building Research & Information, 49(1), pp. 69-83. ISSN 0961-3218

Leishman, C and Warren, F (2006) Private housing design customization through house type substitution. Construction Management and Economics, 24(2), pp. 149-158. ISSN 01446193

Lekan, A; Aigbavboa, C and Emetere, M (2023) Managing quality control systems in intelligence production and manufacturing in contemporary time. International Journal of Construction Management, 23(8), pp. 1436-1446. ISSN 1562-3599

Lello, D; Huang, Y; Emuze, F and Alananga, S (2024) Professional knowledge infusion and service performance within outbound consultant-supplier interfaces in Tanzania's construction industry: Can networking and stakeholder support play cards? International Journal of Construction Management, 24(15), pp. 1643-1654. ISSN 1562-3599

Lemma, M; Tarsi, M and Carbonari, A (2025) Development of a framework to track life safety levels of occupants in the event of a fire in buildings. Architectural Engineering and Design Management, 21(4), pp. 681-704. ISSN 1745-2007

Leon, M; Ahiaga-Dagbui, D; Fleming, C and Laing, R (2017) Exploring visual asset management collaboration: Learning from the oil and gas sector. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Leu, S-S (1992) Object-oriented representation model of construction technology information. PhD thesis, University of Michigan, USA.

Levenson, M; Pearlmutter, D and Aleksandrowicz, O (2025) An observational analysis of shade-related pedestrian activity. Buildings & Cities, 6(1), pp. 398-414. ISSN 2632-6655

Lewis, J A; Odeyinka, H and Eadie, R (2011) Innovative construction procurement selection through an artificial intelligence approach. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Lewis, T (1998) Electronic data interchange in the construction industry. PhD thesis, Loughborough University, UK.

Li, J.; Chen, Z.; Li, Z.; Kong, L. and Zhang, H. (2026) Integrating computer vision and audio signals for concrete vibration activity recognition and assessment. Journal of Construction Engineering and Management, 152(7): 04026099, ISSN 0733-9364

Li, L; Cui, X; Wang, J; Jin, H and Xu, H (2026) Automated tracking of worker and heavy equipment on tunnel construction sites: Deep-learning framework. Journal of Construction Engineering and Management, 152(2): 04025237, ISSN 0733-9364

Li, M.; Liang, N.; Ma, X. and Chen, J. (2026) Image captioning for automated bridge inspection: A feasibility study. Construction Innovation, pp. 1-30. ISSN 1471-4175

Li, M N; Wang, X; Cheng, R X and Chen, Y (2025) Aided design decision-making framework for engineering projects considering cost and social benefits. Engineering, Construction and Architectural Management, 32(8), pp. 5040-5065. ISSN 0969-9988

Li, Y and Zhong, R Y (2026) Spatial-temporal traceability and coordination in modular integrated construction: A future framework with hybrid digital twin and reinforcement learning. International Journal of Construction Management, 26(5), pp. 875-904. ISSN 1562-3599

Li, H (1996) Selecting KBES development techniques for applications in the construction industry. Construction Management and Economics, 14(1), pp. 67-74. ISSN 01446193

Li, H (1997) Determinants of knowledge-based expert system success in construction engineering. Building Research & Information, 25(2), pp. 101-106. ISSN 0961-3218

Li, H; Chan, N K Y and Skitmore, M (2012) The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes. Construction Innovation, 12(4), pp. 429-446. ISSN 1471-4175

Li, H and Love, P E D (1997) Combining rule-based expert systems and artificial neural networks for mark-up estimation. Construction Management and Economics, 17(2), pp. 169-176. ISSN 01446193

Li, H; Su, L; Zuo, J; An, X; Dong, G; Wang, L and Zhang, C (2023) The framework of data-driven and multi-criteria decision-making for detecting unbalanced bidding. Engineering, Construction and Architectural Management, 30(2), pp. 598-622. ISSN 0969-9988

Li, J (2004) Web-based integrated project control. PhD thesis, Concordia University, Canada.

Li, J; Moselhi, O and Alkass, S (2006) Internet-based database management system for project control. Engineering, Construction and Architectural Management, 13(3), pp. 242-253. ISSN 0969-9988

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Li, P; Tang, Y; Zheng, Z; Wang, Z and Zhuang, Y (2024) Semiautomated railway line information modeling based on asset management data. Journal of Construction Engineering and Management, 150(10): 04024130, ISSN 0733-9364

Li, S and Ling, F Y Y (2012) Critical strategies for Chinese architectural, engineering and construction firms to achieve profitability. Engineering, Construction and Architectural Management, 19(5), pp. 495-511. ISSN 0969-9988

Li, S D and Xu, Z D (2022) System configuration design of BIM object-oriented database for civil engineering. Journal of Construction Engineering and Management, 148(12): 04022130, ISSN 0733-9364

Li, W (1995) Benefit and cost analysis: Three-dimensional computer models with integrated databases in the management of construction. PhD thesis, Columbia University, USA.

Li, Y; Cao, L; Zhang, J; Jiang, Y; Han, Y and Wei, J (2021) Energy benchmarking in healthcare facilities: A comparative study. Journal of Construction Engineering and Management, 147(11): 04021159, ISSN 0733-9364

Liang, C-J (2021) Affecting fundamental transformation in future construction work through replication of the master-apprentice learning model in human-robot worker teams. PhD thesis, University of Michigan, USA.

Liang, H; Weng, Y; Tang, S W Y and Yeoh, J K W (2024) Automated filtering of façade defect images using a similarity method for enhanced inspection documentation. Building Research & Information, 52(1-2), pp. 194-206. ISSN 0961-3218

Liang, J (1998) System integration and database management for computer-aided design of tall building structures. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Liang, Y (2006) Integrated IT systems for construction site management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Liang, Y; Sun, H; Chen, M and Liu, J (2021) Research on fraudulent, corrupt and collusive practices in infrastructure projects. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Liang, Y and Xu, Z (2025) Intelligent inspection of appearance quality for precast concrete components based on improved YOLO model and multi-source data. Engineering, Construction and Architectural Management, 32(3), pp. 1691-1714. ISSN 0969-9988

Liao, M C; Hsieh, T Y and Wang, W H (2024) Management of gross negligence manslaughter liability construction for professionals and lessons learned. Engineering, Construction and Architectural Management, 31(12), pp. 4942-4954. ISSN 0969-9988

Liao, P-C (2008) Influence factors of engineering productivity and their impact on project performance. PhD thesis, University of Texas at Austin, USA.

Liberatore, M J; Pollack-Johnson, B and Smith, C A (2001) Project management in construction: Software use and research directions. Journal of Construction Engineering and Management, 127(2), pp. 101-107. ISSN 0733-9364

Lim, J N and Peltner, F (2011) Innovation performance of construction enterprises: An empirical assessment of the German and Singapore construction enterprises. Construction Innovation, 11(3), pp. 282-304. ISSN 1471-4175

Lim, T; Porras-Alvarado, J D and Zhang, Z (2019) Pricing of highway infrastructure for transportation asset management. Built Environment Project and Asset Management, 9(1), pp. 64-79. ISSN 2044-124X

Lin, Y H; Dai, J; Li, J and Tao, X (2026) Efficient classification and disposal management of construction waste using blockchain technology and system dynamics. Journal of Construction Engineering and Management, 152(2): 04025242, ISSN 0733-9364

Lin, K Y and Soibelman, L (2007) Knowledge-assisted retrieval of online product information in architectural/engineering/construction. Journal of Construction Engineering and Management, 133(11), pp. 871-879. ISSN 0733-9364

Lin, K-L (1995) Planning for critical construction operations involving large semi-stationary equipment. PhD thesis, University of Texas at Austin, USA.

Lin, K-Y (2005) Knowledge-assisted retrieval of online product information in A/E/C (architecture/engineering/construction). PhD thesis, University of Illinois at Urbana-Champaign, USA.

Lin, L-k (1994) Improving the productivity of roadway construction job sites with a portable expert system. PhD thesis, University of Utah, USA.

Linares-Garcia, D A and Roofigari-Esfahan, N (2024) Practical deployment of BIM-interoperable voice-based intelligent virtual agent support construction worker productivity. Journal of Construction Engineering and Management, 150(11): 04024153, ISSN 0733-9364

Lines, B C; Sullivan, K T and Wiezel, A (2016) Support for organizational change: Change-readiness outcomes among AEC project teams. Journal of Construction Engineering and Management, 142(2): 04015062, ISSN 0733-9364

Ling, F Y Y and Kwok, D H Y (2007) Enablers for Singapore contractors to internationalize construction services. Construction Management and Economics, 25(3), pp. 267-275. ISSN 1466433X

Lingard, H.; Cooke, T. and Gharaie, E. (2013) A case study analysis of fatal incidents involving excavators in the Australian construction industry. Engineering, Construction and Architectural Management, 20(5), pp. 488-504. ISSN 0969-9988

Liu, Y.; Schmidt, S.; Li, H. and Cao, Y. (2026) A study on the moisture risk assessment path for exterior wall of existing residential building in Shanghai based on hygrothermal simulation analysis. Architectural Engineering and Design Management, 22(2), pp. 340-364. ISSN 1745-2007

Liu, C and Song, Y (2005) Multifactor productivity measures of construction sectors using oecd input-output database. Journal of Construction Research, 6(2), pp. 209-222. ISSN 1609-9451

Liu, C and Zhu, R (2017) Measuring output structures of multinational construction industries using the world input-output database. International Journal of Construction Management, 17(1), pp. 1-12. ISSN 1562-3599

Liu, D; Wang, Y; Chen, J and Zhang, Y (2020) Intelligent compaction practice and development: a bibliometric analysis. Engineering, Construction and Architectural Management, 27(5), pp. 1213-1232. ISSN 0969-9988

Liu, H; Han, S and Zhu, Z (2023) Blockchain technology toward smart construction: Review and future directions. Journal of Construction Engineering and Management, 149(3): 03123002, ISSN 0733-9364

Liu, J; Duan, L; Lin, S; Miao, J and Zhao, J (2024) Semantic web-based crud operation and constraint validation for IFC-based information management. Journal of Construction Engineering and Management, 150(10): 04024135, ISSN 0733-9364

Liu, J; Shahi, A; Haas, C T; Goodrum, P and Caldas, C H (2014) Validation methodologies and their impact in construction productivity research. Journal of Construction Engineering and Management, 140(10): 04014046, ISSN 0733-9364

Liu, P; Yang, Z; Huang, J and Wang, T K (2025) The effect of augmented reality applied to learning process with different learning styles in structural engineering education. Engineering, Construction and Architectural Management, 32(6), pp. 3727-3759. ISSN 0969-9988

Liu, Y (2021) From best practices to next practices: project-based learning in the development of large infrastructure. PhD thesis, Delft University of Technology, Netherlands.

Liu, Y; Yao, F; Ji, Y; Tong, W; Liu, G; Li, H X and Hu, X (2022) Quality control for offsite construction: Review and future directions. Journal of Construction Engineering and Management, 148(8): 03122003, ISSN 0733-9364

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

Lofqvist, P (1994) Knowledge-based systems for preliminary design of structures. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Logcher, R D; Wang, M T and Chen, F H S (1989) Knowledge processing for construction management data base. Journal of Construction Engineering and Management, 115(2), pp. 196-211. ISSN 0733-9364

London, K; Singh, V; Taylor, C; Gu, N and Brankovic, L (2008) Building information modelling project decision support framework. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Louis, J (2016) Simulation analysis, monitoring, and control of operations. PhD thesis, Purdue University, USA.

Lowe, D J (1996) Experiental learning in design cost estimating. PhD thesis, University of Manchester, UK.

Lu, M and Anson, M (2004) Establish concrete placing rates using quality control records from Hong Kong building construction projects. Journal of Construction Engineering and Management, 130(2), pp. 216-224. ISSN 0733-9364

Lu, W (2014) Reliability of Engineering News-Record international construction data. Construction Management and Economics, 32(10), pp. 968-982. ISSN 01446193

Lu, Z (2018) Feasibility assessment framework for financing public-private partnership infrastructure projects through asset-backed security. PhD thesis, Columbia University, USA.

Lucenti Jr., M J (1999) Flexible computer support for collaboration in civil infrastructure management. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Lucko, G; Helinski, P O and Ballesteros-Pérez, P (2026) Universal model for performance and delay tracking of linear construction schedules. Journal of Construction Engineering and Management, 152(5): 04026035, ISSN 0733-9364

Lucko, G (2003) A statistical analysis and model of the residual value of different types of heavy construction equipment. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Lucko, G; Anderson-Cook, C M and Vorster, M C (2006) Statistical considerations for predicting residual value of heavy equipment. Journal of Construction Engineering and Management, 132(7), pp. 723-732. ISSN 0733-9364

Luiten, G T and Tolman, F P (1997) Automating communication in civil engineering. Journal of Construction Engineering and Management, 123(2), pp. 113-120. ISSN 0733-9364

Lukito, P K (2000) A framework for environmental monitoring infrastructure investment planning in developing areas. PhD thesis, University of Wisconsin - Madison, USA.

Luo, H (2021) Automated construction machine pose monitoring using computer vision and deep learning for construction site safety. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Luo, X; Li, X; Song, X and Liu, Q (2023) Convolutional neural network algorithm-based novel automatic text classification framework for construction accident reports. Journal of Construction Engineering and Management, 149(12): 04023128, ISSN 0733-9364

Lytle, A M (2011) A framework for object recognition in construction using building information modeling and high frame rate three-dimensional imaging. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Ma, H; Zeng, S; Lin, H and Zeng, R (2020) Impact of public sector on sustainability of public-private partnership projects. Journal of Construction Engineering and Management, 146(2): 04019104, ISSN 0733-9364

Ma, L (2022) A BIM-based life cycle assessment tool of embodied energy and environmental impacts of reinforced concrete tall buildings. PhD thesis, Illinois Institute of Technology, USA.

Ma, T and Liu, Y (2024) Multiple paths to enhancing the resilience of project-based organizations from the perspective of CSR configuration: Evidence from the Chinese construction industry. Engineering, Construction and Architectural Management, 31(2), pp. 835-865. ISSN 0969-9988

Ma, X; Chan, A P C; Wu, H; Xiong, F and Dong, N (2018) Achieving leanness with BIM-based integrated data management in a built environment project. Construction Innovation, 18(4), pp. 469-487. ISSN 1471-4175

Macchiarulo, V (2022) Integration of satellite radar interferometry and civil engineering procedures to assess building and infrastructure conditions. PhD thesis, University of Bath, UK.

Madanayake, U H and Egbu, C (2019) Critical analysis for big data studies in construction: Significant gaps in knowledge. Built Environment Project and Asset Management, 9(4), pp. 530-547. ISSN 2044-124X

Madenli, O; Atasoy, G and Dikmen, I (2026) Identification and categorization of defects in construction specifications utilizing natural language processing. Journal of Construction Engineering and Management, 152(5): 04026044, ISSN 0733-9364

Madushika, U G D and Lu, W (2026) Policy strategies for green retrofitting adoption: A systematic review and future directions. International Journal of Construction Management, 26(5), pp. 805-824. ISSN 1562-3599

Maghrebi, M; Shamsoddini, A and Waller, S T (2016) Fusion-based learning approach for predicting concrete pouring productivity based on construction and supply parameters. Construction Innovation, 16(2), pp. 185-202. ISSN 1471-4175

Mah, D; Manrique, J D; Yu, H; Al-Hussein, M and Nasseri, R (2011) House construction CODN2/DN footprint quantification: A BIM approach. Construction Innovation, 11(2), pp. 161-178. ISSN 1471-4175

Mahamood, S Z H and Fathi, M S (2022) Seismic building design work process using building information modeling (BIM) technology for Malaysian government projects. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 211-232. ISSN 1759-5916

Mahdavian, A and Shojaei, A (2020) Hybrid genetic algorithm and constraint-based simulation framework for building construction project planning and control. Journal of Construction Engineering and Management, 146(12): 04020140, ISSN 0733-9364

Mahdi, I M; Khalil, A H; Mahdi, H A and Mansour, D M M (2022) Decision support system for optimal bridge' maintenance. International Journal of Construction Management, 22(3), pp. 342-356. ISSN 1562-3599

Mahmoud, H M (1998) Applying a fuzzy logic expert system in the selection of bridge deck joints. PhD thesis, University of Central Florida, USA.

Mahmud, A; Ogunlana, S O; Hong, W T; Yahaya, I W and Akoh, S R (2023) Adopting qualitative data in conceptual system dynamic modelling. Construction Economics and Building, 23(3-4), pp. 71-86. ISSN 2204-9029

Mahpour, A (2022) The application of data science to highway asset management investment strategies. PhD thesis, University of Toronto, Canada.

Majrouhi Sardroud, J (2011) Assessment and development of radio frequency identification applications for effective management of construction activities. PhD thesis, Kingston University, UK.

Mak, S W (1995) Risk analysis in construction: A paradigm shift from a hard to soft approach. Construction Management and Economics, 13(5), pp. 385-392. ISSN 01446193

Makabate, C T; Musonda, I; Okoro, C S and Chileshe, N (2022) Scientometric analysis of BIM adoption by SMEs in the architecture, construction and engineering sector. Engineering, Construction and Architectural Management, 29(1), pp. 179-203. ISSN 0969-9988

Makoye, M; Mlinga, R S and Ndanshau, M O A (2023) Impact of macroeconomic factors on performance of construction industry in Tanzania. International Journal of Construction Management, 23(15), pp. 2625-2636. ISSN 1562-3599

Makulsawatudom, A (2003) Construction productivity measurement and improvement in Thailand by improved work-sampling. PhD thesis, University of Strathclyde, UK.

Malaki, M; Shou, W and Wang, J (2025) Psychological distress among male construction workers in Australia: A systematic analysis. International Journal of Construction Management, 25(15), pp. 1791-1799. ISSN 1562-3599

Mandal, S (2014) Supply chain resilience: A state-of-the-art review and research directions. International Journal of Disaster Resilience in the Built Environment, 5(4), pp. 427-453. ISSN 1759-5916

Mangano, G; Castelblanco, G; De Marco, A and Ottaviani, F M (2025) Exploring the drivers of concession period in transport public–private partnerships. Built Environment Project and Asset Management, 15(2), pp. 193-210. ISSN 2044-124X

Mango, T (2014) The impact of real estate construction and holding companies: A case study of Beirut's Solidere and Amman's Abdali. PhD thesis, University of Exeter, UK.

Manzoor, B; Antwi-Afari, M F; Alotaibi, K S; Edwards, D J and Posillico, J J (2025) Critical success factors for implementing digital twin technology in construction projects: A systematic and bibliometric approach. Journal of Construction Engineering and Management, 151(12): 03125008, ISSN 0733-9364

Mao, X (2008) The framework of TRIZ-enhanced-value engineering analysis and its knowledge management. PhD thesis, University of Alberta, Canada.

Mao, Z (2003) Forecasting total factor productivity growth in the construction industry using neural network modelling. PhD thesis, National University of Singapore, Singapore.

Maor, I (2002) Conceptual design and selection of HVAC&r systems by combining knowledge based expert system with a building energy simulation program. PhD thesis, Drexel University, USA.

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Marinelli, M D L F N L S (2015) Non-parametric bill-of-quantities estimation of concrete road bridge superstructure: An artificial neural networks approach. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Markiz, N and Jrade, A (2022) Integrating an expert system with brims, cost estimation, and linear scheduling at conceptual design stage of bridge projects. International Journal of Construction Management, 22(5), pp. 913-928. ISSN 1562-3599

Marocco, M and Garofolo, I (2021) Operational text-mining methods for enhancing building maintenance management. Building Research & Information, 49(8), pp. 893-911. ISSN 0961-3218

Marsh, A T M and Kulshreshtha, Y (2022) The state of earthen housing worldwide: How development affects attitudes and adoption. Building Research & Information, 50(5), pp. 485-501. ISSN 0961-3218

Marsh, K and Fayek, A R (2010) SuretyAssist: Fuzzy expert system to assist surety underwriters in evaluating construction contractors for bonding. Journal of Construction Engineering and Management, 136(11), pp. 1219-1226. ISSN 0733-9364

Martin, H and Ramjarrie, K (2021) Cloud contractor selection model for design-build open tender. Journal of Construction Engineering and Management, 147(4): 04021020, ISSN 0733-9364

Marwah, H (2011) Investing in ghosts: Building and construction in Nigeria's oil boom and bust c1960-2000. PhD thesis, University of Oxford, UK.

Marx, H (2010) Employers' and agents' perspectives of the condition of the construction industry in South Africa. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Marx, H J (2011) Key performance indicators measuring contractor satisfaction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Marzouk, M (2002) Optimizing earthmoving operations using computer simulation. PhD thesis, Concordia University, Canada.

Marzouk, M; ElSharkawy, M; Elsayed, P and Eissa, A (2020) Resolving deterioration of heritage building elements using an expert system. International Journal of Building Pathology and Adaptation, 38(5), pp. 721-735. ISSN 23984708

Marzouk, M and Enaba, M (2019) Analyzing project data in BIM with descriptive analytics to improve project performance. Built Environment Project and Asset Management, 9(4), pp. 476-488. ISSN 2044-124X

Marzouk, M and Zaher, M (2020) Artificial intelligence exploitation in facility management using deep learning. Construction Innovation, 20(4), pp. 609-624. ISSN 1471-4175

Mason, B (2023) Advancing autonomous green stormwater infrastructure. PhD thesis, University of Michigan, USA.

Matarneh, S; Elghaish, F; Al-Ghraibah, A; Abdellatef, E and Edwards, D J (2025) An automatic image processing based on hough transform algorithm for pavement crack detection and classification. Smart and Sustainable Built Environment, 14(1), pp. 1-22. ISSN 2046-6099

Matarneh, S T (2019) BIM-based information exchange framework to support facilities management systems. PhD thesis, University of Portsmouth, UK.

Matel, E; Vahdatikhaki, F; Hosseinyalamdary, S; Evers, T and Voordijk, H (2022) An artificial neural network approach for cost estimation of engineering services. International Journal of Construction Management, 22(7), pp. 1274-1287. ISSN 1562-3599

Mathur, Sandeep (2024) Managing data science initiatives as exploratory projects : A new approach to program management. PhD thesis, University of Technology Sydney, Australia.

Matsumoto, I T; Thorpe, A; Baldwin, A and McWilliams, R (2002) Linking process mapping and technology: A case study of teamwork 2001. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Matthews, J C (2010) Integrated, multi-attribute decision support system for the evaluation of underground utility construction methods. PhD thesis, Louisiana Tech University, USA.

Mavrogianni, A; Davies, M; Chalabi, Z; Wilkinson, P; Kolokotroni, M and Milner, J (2009) Space heating demand and heatwave vulnerability: London domestic stock. Building Research & Information, 37(5-6), pp. 583-597. ISSN 0961-3218

May, Margaret Gabrielle (2016) An unusual shade of green: Greenfield cases and greenfield agreements in Australia 2006-2012. PhD thesis, Griffith University, Australia.

Mayara Regina, M and Tavares, S F (2021) Materials passport's review: Challenges and opportunities toward a circular economy building sector. Built Environment Project and Asset Management, 11(4), pp. 767-782. ISSN 2044-124X

Mbadugha, L C; Ozumba, A O U and Shakantu, W (2021) Prospects for integrated design process (IDP) in implementing construction waste prevention (CWP) practices. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

McConnell, William J (2026) Termination-for-default risk for construction contractors. PhD thesis, University of Colorado at Denver, USA.

McErlane, A; Heaney, G; Haran, M and McClements, S (2016) The application of stakeholder theory to UK PPP stakeholders. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

McGartland, M R and Hendrickson, C T (1985) Expert systems for construction project monitoring. Journal of Construction Engineering and Management, 111(3), pp. 293-307. ISSN 0733-9364

McIntosh, G and Sloan, B (2001) The potential impact of electronic procurement and global sourcing within the UK construction industry. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

McIntosh, J F (1984) The application of the relational data model to computer-aided building design. ArchD thesis, University of Michigan, USA.

McMahon, E; Spillane, J P and Bradley, J G (2023) When enough is not enough! Evaluating the minimum entry requirements for apprenticeships in Ireland. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

McMillan, L (2023) Artificial intelligence–enabled self-healing infrastructure systems. PhD thesis, University College London, UK.

Mead, S P (1999) Communication effectiveness in intranet based construction projects. PhD thesis, Loughborough University, UK.

Meaker, T A (1994) The role of intervention in strategic change. PhD thesis, City, University of London, UK.

Mehany, M S H M (2014) Delay-caused claims in infrastructure projects under design-bid-build delivery systems. PhD thesis, Colorado State University, USA.

Mehmood, U.; Ujang, U. and Azri, S. (2026) Spatiotemporal 3D GIS-integrated rule-based scheduling for high-rise maintenance optimisation: A Malaysian case study. Built Environment Project and Asset Management, 16(2), pp. 321-337. ISSN 2044-124X

Mei, X; Xu, F; Zhang, Z and Tao, Y (2025) Unsafe behavior identification on construction sites by combining computer vision and knowledge graph-based reasoning. Engineering, Construction and Architectural Management, 32(12), pp. 8360-8389. ISSN 0969-9988

Membah, J and Asa, E (2015) Estimating cost for transportation tunnel projects: A systematic literature review. International Journal of Construction Management, 15(3), pp. 196-218. ISSN 1562-3599

Menassa, C C (2009) Quantitative framework to evaluate alternative dispute resolution investments in architecture engineering and construction projects using option and real option theory. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Mendes, J R; Fernando, L; Heineck, M and Vaca, O L (1998) New applications of line of balance on scheduling of multi-storey buildings. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Meng, Q; Zhu, J; Li, Z and Chong, H Y (2024) Clarifying unsafe behaviors of construction workers through a complex network of unsafe behavior chains. Journal of Construction Engineering and Management, 150(11): 04024164, ISSN 0733-9364

Meng, Q and Zhu, S (2022) Construction activity classification based on vibration monitoring data: A supervised deep-learning approach with time series randaugment. Journal of Construction Engineering and Management, 148(9): 04022090, ISSN 0733-9364

Meng, Y; Antwi-Afari, M F; Mehmood, I; Anwer, S and Umer, W (2024) Building information modelling-based digital twin applications in construction safety management: A review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Meyer, H W G (1991) Conceptual model for integrating business activity and data systems in the AEC industry. PhD thesis, University of Wisconsin - Madison, USA.

Mezher, T; Abdul-Malak, M A; Arnaout, S and Bassil, Z (2004) Public project programming system (3PS): A decision support system for public sector investment. Construction Innovation, 4(2), pp. 99-111. ISSN 1471-4175

Mhlanga, J; Haupt, T C and Loggia, C (2024) Shaping circular economy in the built environment in Africa. A bibliometric analysis. Journal of Engineering, Design and Technology, 22(2), pp. 613-642. ISSN 1726-0531

Mhundwa, R and Simon, M (2021) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (DXBMC) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Migliaccio, G C; Bogus, S M and Cordova-Alvidrez, A A (2014) Continuous quality improvement techniques for data collection in asset management systems. Journal of Construction Engineering and Management, 140(4): B4013008, ISSN 0733-9364

Mika, Kenneth R (2025) A quantitative survey to explore leadership influence in cultural integration during acquisitions at architectural, engineering, and construction firms. DBA thesis, Edgewood University, USA.

Milligan, C E (1992) Integrated construction coordination change response system. PhD thesis, Texas A&M University, USA.

Min, J U (2004) Supply chain visualization through web services integration. PhD thesis, Stanford University, USA.

Minchin, R E; Li, X; Issa, R R and Vargas, G G (2013) Comparison of cost and time performance of design-build and design-bid-build delivery systems in Florida. Journal of Construction Engineering and Management, 139(10): 04013007, ISSN 0733-9364

Minh, Huynh Quang (2016) Developing skilled labour: An analysis of the major factors which enable and hinder employee training in construction companies in Vietnam. DBA thesis, Western Sydney University, Australia.

Mirahadi, S (2020) EvacuSafe: A smart evacuation management system for buildings. PhD thesis, University of Toronto, Canada.

Miraj, P; Wang, T; Koutamanis, A and Chan, P (2025) Organising digital twin in the built environment: A systematic review and research directions on the missing links of use and user perspectives of digital twin in architecture, engineering and construction (AEC) sector. Construction Management and Economics, 43(6), pp. 465-481. ISSN 0144-6193

Mireku, E K; Kissi, E; Abu, I M A; Acheampong, A and Armah, N K P (2025) Strategies for the development of mental toughness of construction professionals: The case of Ghana. Journal of Engineering, Design and Technology, 23(5), pp. 1447-1462. ISSN 1726-0531

Mirzaei, J; Amiri Hanzaei, H; Khaleghi, H and Kashani, H (2024) Cost estimation models for seismic retrofit of masonry school buildings. International Journal of Construction Management, 24(8), pp. 843-853. ISSN 1562-3599

Mitchell Jr., Z W (1998) A statistical analysis of construction equipment repair costs using field data and the cumulative cost model. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Mitchell Jr., Zane Windsor (1998) A statistical analysis of construction equipment repair costs using field data & the cumulative cost model. PhD thesis, Virginia Tech, USA.

Mitra, A and Munir, K (2019) Influence of big data in managing cyber assets. Built Environment Project and Asset Management, 9(4), pp. 503-514. ISSN 2044-124X

Mitropoulos, P and Tatum, C B (1999) Technology adoption decisions in construction organizations. Journal of Construction Engineering and Management, 125(5), pp. 330-338. ISSN 0733-9364

Mitropoulos, P and Tatum, C B (2000) Forces driving adoption of new information technologies. Journal of Construction Engineering and Management, 126(5), pp. 340-348. ISSN 0733-9364

Mmereki, D and Brouwer, D (2022) Application of innovative materials and methods in green buildings and associated occupational exposure and health of construction workers: A systematic literature review. Journal of Construction Engineering and Management, 148(8): 04022068, ISSN 0733-9364

Mnea, A and Zairul, M (2023) Housing design studies in Saudi Arabia: A thematic review. Journal of Construction in Developing Countries, 28(1), pp. 317-339. ISSN 1823-6499

Mo, Y Y (2010) Measuring and enhancing the emotional intelligence of built environment students. PhD thesis, Loughborough University, UK.

Mochtar, K (2000) Market-based pricing in construction. PhD thesis, Illinois Institute of Technology, USA.

Modin, J (1995) KBS-class: A neural network tool for automatic content recognition of building texts. Construction Management and Economics, 13(5), pp. 411-416. ISSN 01446193

Moezzi, M and Goins, J (2011) Text mining for occupant perspectives on the physical workplace. Building Research & Information, 39(2), pp. 169-182. ISSN 0961-3218

Mogge Jr., J W (2004) Breaking through the first cost barriers of sustainable planning, design, and construction. PhD thesis, Georgia Institute of Technology, USA.

Moghaddam, S.; Dashti, M. S.; Alvanchi, A. and Khanzadi, M. (2026) An integrated BIM-based augmented reality framework for improving facility maintenance management. Engineering, Construction and Architectural Management, 33(3), pp. 2007-2047. ISSN 0969-9988

Moghani, E (2013) A simulation-based framework for as-built documentation of construction process and product information. PhD thesis, University of Alberta, Canada.

Moghayedi, A. and Awuzie, B. (2026) Unlocking sustainability futures: A framework for digital product passports and material banks in a circular built environment. Construction Innovation, 26(9), pp. 135-166. ISSN 1471-4175

Mohamed, E; Jafari, P and Hammad, A (2022) Mixed qualitative–quantitative approach for bidding decisions in construction. Engineering, Construction and Architectural Management, 29(6), pp. 2328-2357. ISSN 0969-9988

Mohammed, S (2022) Effect of political corruption on project failure. A multilevel inquiry on the effects of corruption on public sector construction project failure in emerging and advanced market economies. DBA thesis, Northcentral University, USA.

Mohan, S (1990) Expert systems applications in construction management and engineering. Journal of Construction Engineering and Management, 116(1), pp. 87-99. ISSN 0733-9364

Mohsen, Osama (2021) A machine learning approach to predict production time in industrialized building construction. PhD thesis, University of Alberta, Canada.

Mojtahedi, Seyed Mohammad Hossein (2014) Stakeholder attributes and approaches in natural disaster risk management in the built environment: The case of flood risk management in transport infrastructure. PhD thesis, University of Sydney, Australia.

Mokhtar, A H M (1998) An information model for managing design changes in a collaborative multidisciplinary design environment. PhD thesis, Concordia University, Canada.

Molad, C and Edward Back, W (1995) EDI's role as an enabler for electronic commerce and information integration. Engineering, Construction and Architectural Management, 2(2), pp. 93-104. ISSN 0969-9988

Momade, M H; Durdyev, S; Van Tam, N; Shahid, S; Mbachu, J and Momade, Y (2024) Factors influencing adoption of construction technologies in Vietnam's residential construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1002-1018. ISSN 2398-4708

Momade, M H; Shahid, S; Falah, G; Syamsunur, D and Estrella, D (2023) Review of construction labor productivity factors from a geographical standpoint. International Journal of Construction Management, 23(4), pp. 697-707. ISSN 1562-3599

Momtazi, S (2021) Reducing cost overruns in construction projects using lean methodology. DEng thesis, George Washington University, USA.

Moodi, F and Knapton, J (2003) Research into a management system for diagnosis, maintenance, and repair of concrete structures. Journal of Construction Engineering and Management, 129(5), pp. 555-561. ISSN 0733-9364

Moohialdin, A S M; Lamari, F; Miska, M and Trigunarsyah, B (2020) Construction worker productivity in hot and humid weather conditions: A review of measurement methods at task, crew and project levels. Engineering, Construction and Architectural Management, 27(1), pp. 83-108. ISSN 0969-9988

Moore, N (2013) A model based system for contextual on-site construction planning in augmented reality. PhD thesis, University of Wolverhampton, UK.

Moore, N J (2013) A contextual AR model based system on-site construction planning. PhD thesis, University of Wolverhampton, UK.

Morad, A A (1990) Geometric-based reasoning system for project planning utilizing AI and CAD technologies. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Moradpour, N; Pourahmad, A; Hataminejad, H; Ziari, K and Sharifi, A (2023) An overview of the state of urban resilience in Iran. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 154-184. ISSN 1759-5916

Moragane, H P M N L B; Perera, B A K S; Palihakkara, A D and Ekanayake, B (2024) Application of computer vision for construction progress monitoring: A qualitative investigation. Construction Innovation, 24(2), pp. 446-469. ISSN 1471-4175

Morais, Marcelo de (2016) Method for implementing BIM and target costing in social housing. PhD thesis, Universidade Estadual de Campinas, Brazil.

Morbitzer, C A (2003) Towards the integration of simulation into the building design process. PhD thesis, University of Strathclyde, UK.

Morcous, G S L (2000) Case -based reasoning for modeling bridge deterioration. PhD thesis, Concordia University, Canada.

Morrow, T K (1998) Effects of selected practices on project cost performance. PhD thesis, University of Texas at Austin, USA.

Moschandreas, D J; Yoon, S H and Demirev, D (2006) Validation of the indoor environmental quality conceptual model. Building Research & Information, 34(5), pp. 483-495. ISSN 0961-3218

Moselhi, O; Hegazy, T and Fazio, P (1991) Neural networks as tools in construction. Journal of Construction Engineering and Management, 117(4), pp. 606-625. ISSN 0733-9364

Moselhi, O and Nicholas, M J (1990) Hybrid expert system for construction planning and scheduling. Journal of Construction Engineering and Management, 116(2), pp. 221-238. ISSN 0733-9364

Moshood, T D; Rotimi, F E and Rotimi, J O B (2022) An integrated paradigm for managing efficient knowledge transfer: Towards a more comprehensive philosophy of transferring knowledge in the construction industry. Construction Economics and Building, 22(3), pp. 65-98. ISSN 2204-9029

Moshtaghian, F; Golabchi, M and Noorzai, E (2020) A framework to dynamic identification of project risks. Smart and Sustainable Built Environment, 9(4), pp. 375-393. ISSN 2046-6099

Mostafa, S; Chileshe, N and Abdelhamid, T S (2016) Lean and agile integration within offsite construction using discrete event simulation: A systematic literature review. Construction Innovation, 16(4), pp. 483-525. ISSN 1471-4175

Mousavi, Milad (2025) Evolving and proactive risk modelling in underground working environments. PhD thesis, University of New South Wales, Australia.

Moussa, M A E-F M (2013) Unified simulation methodology and project risk assessment framework. PhD thesis, University of Calgary, Canada.

Moustafa, I M M (2001) A decision support system for the selection of the optimum contractor. PhD thesis, University of Southampton, UK.

Moyo, T; Crafford, G and Emuze, F (2022) Sustainability learning for improved safe work environments for construction semi-skilled workers in Zimbabwe. Built Environment Project and Asset Management, 12(6), pp. 940-955. ISSN 2044-124X

Muaz, Fagiar (2019) Forensic schedule information modeling for analysis of time claims in construction projects. PhD thesis, University of Alberta, Canada.

Murguia, D; Demian, P and Soetanto, R (2021) Systemic BIM adoption: A multilevel perspective. Journal of Construction Engineering and Management, 147(4): 04021014, ISSN 0733-9364

Murguia, D; Demian, P and Soetanto, R (2023) The role of the industry's cultural-cognitive elements on actors' intention to adopt BIM: An empirical study in Peru. Engineering, Construction and Architectural Management, 30(3), pp. 1183-1200. ISSN 0969-9988

Murphy, M; Heaney, G and Perera, S (2011) A methodology for evaluating construction innovation constraints through project stakeholder competencies and FMEA. Construction Innovation, 11(4), pp. 416-440. ISSN 1471-4175

Murtaza, M B (1993) A decision support model integrating neural networks and an expert system for construction modularization. PhD thesis, University of Houston, USA.

Mustapha, K; Alhiyafi, J; Shafi, A and Olatunji, S O (2023) Support vector machines for predicting the compressive response of defected 3D printed polymeric sandwich structures. Journal of Engineering, Design and Technology, 21(3), pp. 819-839. ISSN 1726-0531

Myrtveit, I and Stensrud, E (2005) Identifying high performance construction projects. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

N, H. K. and Padala, S. P. S. (2026) A bibliometric review of digital twin-enabled technologies for construction project monitoring and control. Built Environment Project and Asset Management, 16(3), pp. 441-460. ISSN 2044-124X

Naanaa, H.; Bril El Haouzi, H.; Derigent, W. and Lezoche, M. (2026) A semantic search system for efficient information retrieval in the construction domain. Smart and Sustainable Built Environment, 15(5), pp. 1781-1807. ISSN 2046-6099

Nabawy, M and Gouda Mohamed, A (2024) Risks assessment in the construction of infrastructure projects using artificial neural networks. International Journal of Construction Management, 24(4), pp. 361-373. ISSN 1562-3599

Naderpajouh, N and Afshar, A (2008) A case-based reasoning approach to application of value engineering methodology in the construction industry. Construction Management and Economics, 26(4), pp. 363-372. ISSN 1466433X

Najjar, M K; Figueiredo, K; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. International Journal of Construction Management, 22(4), pp. 541-555. ISSN 1562-3599

Namini, Seyed Saeed Banihashemi (2017) Active BIM with artifical intelligence for energy optimisation in buildings. PhD thesis, University of Technology Sydney, Australia.

Nandun Madhusanka Hewa, W; Pan, W and Kumaraswamy, M (2021) Social network analysis applications in sustainable construction and built environment management: A review. Built Environment Project and Asset Management, 11(4), pp. 511-528. ISSN 2044-124X

Naoui, M A; Lejdel, B; Ayad, M; Amamra, A and kazar, O (2021) Using a distributed deep learning algorithm for analyzing big data in smart cities. Smart and Sustainable Built Environment, 10(1), pp. 90-105. ISSN 2046-6099

Nasrazadani, H; Mahsuli, M; Talebiyan, H and Kashani, H (2017) Probabilistic modeling framework for prediction of seismic retrofit cost of buildings. Journal of Construction Engineering and Management, 143(8): 04017055, ISSN 0733-9364

Navabian, N (2020) Development of an automated structural health monitoring system based on wireless sensor network for civil structures. PhD thesis, Auckland University of Technology, New Zealand.

Navon, R (1995) Resource-based model for automatic cash-flow forecasting. Construction Management and Economics, 13(6), pp. 501-510. ISSN 01446193

Navon, R and Berkovich, O (2005) Development and on-site evaluation of an automated materials management and control model. Journal of Construction Engineering and Management, 131(12), pp. 1328-1336. ISSN 0733-9364

Navon, R and Berkovich, O (2006) An automated model for materials management and control. Construction Management and Economics, 24(6), pp. 635-646. ISSN 1466433X

Nayyer, M I; Aravindan, M R and Annamalai, T R (2024) Impact of transparency law on the post-award development phase of toll and annuity PPPs. Built Environment Project and Asset Management, 14(1), pp. 22-37. ISSN 2044-124X

Nazeer, F S; Kamardeen, I and Hasan, A (2024) Research needs for enhancing pre-occupancy evaluation of buildings. Built Environment Project and Asset Management, 14(4), pp. 529-546. ISSN 2044-124X

Neve, H H; Wandahl, S; Lindhard, S; Teizer, J and Lerche, J (2020) Determining the relationship between direct work and construction labor productivity in North America: Four decades of insights. Journal of Construction Engineering and Management, 146(9): 04020110, ISSN 0733-9364

Newman, W H (1934) The building industry and business cycles. PhD thesis, University of Chicago, USA.

Newsham, G R; Veitch, J A and Hu, Y V (2018) Effect of green building certification on organizational productivity metrics. Building Research & Information, 46(7), pp. 755-766. ISSN 0961-3218

Newton, L A (2004) The impact of quality on building life cycle costs. PhD thesis, University of New Brunswick, Canada.

Ngoc-Thoan, N; Bui, D Q T; Tran, C N N and Tran, D H (2024) Improved detection network model based on yolov5 for warning safety in construction sites. International Journal of Construction Management, 24(9), pp. 1007-1017. ISSN 1562-3599

Nguyen, Anne (2024) Learning in contract work: An actor-network theory study of the solar photovoltaic industry. PhD thesis, University of Technology Sydney, Australia.

Nguyen, B N; London, K and Zhang, P (2022) Stakeholder relationships in off-site construction: A systematic literature review. Smart and Sustainable Built Environment, 11(3), pp. 765-791. ISSN 2046-6099

Nguyen, D C; Nguyen, T Q; Jin, R; Jeon, C H and Shim, C S (2022) BIM-based mixed-reality application for bridge inspection and maintenance. Construction Innovation, 22(3), pp. 487-503. ISSN 1471-4175

Nguyen, F B T (2024) Quality control of front-end planning for electric power construction: A collaborative process-based approach using systems engineering. PhD thesis, Colorado State University, USA.

Nguyen, H V (2010) Process-based cost modeling to support target value design. PhD thesis, University of California, Berkeley, USA.

Nguyen, P H D (2020) Development of fuzzy hybrid approaches to project delivery method selection in highway construction. PhD thesis, University of Kansas, USA.

Nguyen, T; Do, Q; Le, T and Le, C (2024) Discovering workers' actions leading to severe construction accidents using accident report data and sequence mining techniques. Journal of Construction Engineering and Management, 150(12): 04024172, ISSN 0733-9364

Nguyen, T A; Le, N M U; Nguyen, S H and Ngo, N V (2024) Determining the Frequency of Component with Building Information Modelling-Level of Development in Facility Management: A Case Study in Vietnam. Journal of Construction in Developing Countries, 29(2), pp. 157-180. ISSN 1823-6499

Nicholls, C (2014) Energy use in non-domestic buildings: The UK government's new evidence base. Building Research & Information, 42(1), pp. 109-117. ISSN 0961-3218

Nielsen, Y and Özbay, F O (2000) Information flow models for large scale public projects. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Nik Bakht, M (2015) Analyzing social network discussions of infrastructure projects: towards a bottom-up decision making environment. PhD thesis, University of Toronto, Canada.

Nikolić, D. and Ewart, I. (2026) Going beyond net zero: Digital twins for achieving socio-ecological sustainability in the built environment. Smart and Sustainable Built Environment, 15(5), pp. 2015-2037. ISSN 2046-6099

Ning, X and Tang, Y (2026) Unraveling the evolution of collaborative innovation networks in megaprojects: Evidence from China. Journal of Construction Engineering and Management, 152(5): 04026047, ISSN 0733-9364

Niu, S and Pan, W (2016) Perspectives and practices of collaborative energy design technologies for closing the building energy performance gap. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Niu, Y; Dai, C; Zhang, R and Yao, H (2025) Peer effects in internationalization of engineering enterprises: Moderating analyses and heterogeneity tests. Engineering, Construction and Architectural Management, 32(7), pp. 4631-4650. ISSN 0969-9988

Nkado, R N (1991) A construction time information system for the building industry. PhD thesis, University of Reading, UK.

Noktehdan, M; Shahbazpour, M; Zare, M R and Wilkinson, S (2019) Innovation management and construction phases in infrastructure projects. Journal of Construction Engineering and Management, 145(2): 04018135, ISSN 0733-9364

Nour, H A (2003) An information approach for enhancing the health and safety file. PhD thesis, University of Manchester, UK.

Nugraheni, F and Scott, D (2006) An approach to define construction practice from construction images. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Nuhu, B K; Aliyu, I; Adegboye, M A; Ryu, J K; Olaniyi, O M and Lim, C G (2021) Distributed network-based structural health monitoring expert system. Building Research & Information, 49(1), pp. 144-159. ISSN 0961-3218

Nuntasunti, S (2004) The effects of visual-based information logistics in construction. PhD thesis, North Carolina State University, USA.

Nwadigo, O B K; Naismith, N; GhaffarianHoseini, A; GhaffarianHoseini, A and Tookey, J (2022) Construction project planning and scheduling as a dynamic system: A content analysis of the current status, technologies and forward action. Smart and Sustainable Built Environment, 11(4), pp. 972-995. ISSN 2046-6099

Nwal, S S; Panuwatwanich, K and Naing, M (2024) Critical factors influencing the performance of public housing construction projects in Myanmar. Journal of Construction in Developing Countries, 29(1), pp. 163-190. ISSN 1823-6499

Nwaogu, J M; Chan, A P C; Hon, C K H and Darko, A (2020) Review of global mental health research in the construction industry: A science mapping approach. Engineering, Construction and Architectural Management, 27(2), pp. 385-410. ISSN 0969-9988

O'Brien, M and Al-Soufi, A (1994) A survey of data communications in the UK construction industry. Construction Management and Economics, 12(5), pp. 457-465. ISSN 01446193

O'Brien, S (2022) Critical infrastructure organisation management: an analysis of the transition to the Industry 4.0 era. PhD thesis, University of Cambridge, UK.

Oberlender, G D and Trost, S M (2001) Predicting accuracy of early cost estimates based on estimate quality. Journal of Construction Engineering and Management, 127(3), pp. 173-182. ISSN 0733-9364

Obi, L; Arif, M; Daniel, E I; Oladinrin, O T and Goulding, J S (2023) Establishing underpinning concepts for integrating circular economy and offsite construction: A bibliometric review. Built Environment Project and Asset Management, 13(1), pp. 123-139. ISSN 2044-124X

Obonyo, E; Anumba, C and Thorpe, T (2005) Apron: An agent-based specification and procurement system for construction products. Engineering, Construction and Architectural Management, 12(4), pp. 329-350. ISSN 0969-9988

Odeh, I S M (2010) Evaluation of glare and lighting performance in nighttime highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Odeyinka, H A and Lowe, J G (2000) An assessment of risk factors involved in modelling cash flow forecasting. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Ogunkah, I (2015) Rethinking low-cost green building material selection process in the design of low-impact green housing developments. PhD thesis, University of Westminster, UK.

Ogunmakinde, O E; Egbelakin, T; Sher, W; Omotayo, T and Ogunnusi, M (2024) Establishing the limitations of sustainable construction in developing countries: A systematic literature review using prisma. Smart and Sustainable Built Environment, 13(3), pp. 609-624. ISSN 2046-6099

Ogunmakinde, O E (2025) Achieving zero waste: Circular economy strategies in Australian higher education. Construction Economics and Building, 25(2), pp. 1-23. ISSN 2204-9029

Ogunseiju, O R; Olayiwola, J; Akanmu, A A and Nnaji, C (2022) Recognition of workers' actions from time-series signal images using deep convolutional neural network. Smart and Sustainable Built Environment, 11(4), pp. 812-831. ISSN 2046-6099

Oguz Erkal, E D (2022) Predicting serious injury and fatality exposure in construction industry. PhD thesis, University of Colorado at Boulder, USA.

Ogwang, A (2016) Threshold-based resurfacing policies in pavement management to minimize costs and greenhouse gas emissions. PhD thesis, UniversityofCalifornia, Berkeley, USA.

Okanlawon, T T; Oyewobi, L O and Jimoh, R A (2023) Evaluation of the drivers to the implementation of blockchain technology in the construction supply chain management in Nigeria. Journal of Financial Management of Property and Construction, 28(3), pp. 459-476. ISSN 1366-4387

Oke, A E; Aliu, J; Ehiosun, L U; Ebekozien, A and Rotimi, A A (2024) From hurdles to heights: Blueprint for tackling distributed ledger technology challenges in the construction sector of a developing economy. Journal of Financial Management of Property and Construction, 29(3), pp. 405-424. ISSN 1366-4387

Oke, A E and Arowoiya, V A (2022) An analysis of the application areas of augmented reality technology in the construction industry. Smart and Sustainable Built Environment, 11(4), pp. 1081-1098. ISSN 2046-6099

Oke, A E; Kineber, A F; Al-Bukhari, I; Famakin, I and Kingsley, C (2023) Exploring the benefits of cloud computing for sustainable construction in Nigeria. Journal of Engineering, Design and Technology, 21(4), pp. 973-990. ISSN 1726-0531

Okoroh, M I (1992) Knowledge based decision support system for the selection and appointment of sub-contractors for building refurbishment contracts. PhD thesis, Loughborough University, UK.

Okoroh, M I and Torrance, V B (1999) A model for subcontractor selection in refurbishment projects. Construction Management and Economics, 17(3), pp. 315-327. ISSN 01446193

Oladimeji, O and Haddad, A N (2025) A systematic review of construction skills acquisition in higher education institutions. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(3), pp. 160-169. ISSN 17514304

Oladinrin, O T; Arif, M; Rana, M Q and Gyoh, L (2023) Interrelations between construction ethics and innovation: A bibliometric analysis using vosviewer. Construction Innovation, 23(3), pp. 505-523. ISSN 1471-4175

Olanipekun, A O and Saka, N (2019) Response of the Nigerian construction sector to economic shocks. Construction Economics and Building, 19(2), pp. 160-180. ISSN 2204-9029

Olatunji, O. A.; Lee, J. J. S.; Chong, H. Y. and Akanmu, A. A. (2021) Building information modelling (BIM) penetration in quantity surveying (qs) practice. Built Environment Project and Asset Management, 11(5), pp. 888-902. ISSN 2044-124X

Olatunji, O A; Orundami, A O and Ogundare, O (2018) Causal relationship between material price fluctuation and project's outturn costs. Built Environment Project and Asset Management, 8(4), pp. 358-371. ISSN 2044-124X

Olatunji, O A and Sher, W (2014) Perspectives on modelling BIM-enabled estimating practices. Construction Economics and Building, 14(4), pp. 32-53. ISSN 2204-9029

Oliveira, L A; Burattino Melhado, S and Vittorino, F (2015) Selection of building technology based on sustainability requirements: Brazilian context. Architectural Engineering and Design Management, 11(5), pp. 390-404. ISSN 1745-2007

Oliveros, A V O and Fayek, A R (2005) Fuzzy logic approach for activity delay analysis and schedule updating. Journal of Construction Engineering and Management, 131(1), pp. 42-51. ISSN 0733-9364

Oloke, D (2003) Development of a web-based off-highway plant information system. PhD thesis, University of Wolverhampton, UK.

Oloke, D; Edwards, D J; Wright, B and Love, P E D (2006) A web-based information management system for predicting the breakdown of off-highway plant. Journal of Engineering, Design and Technology, 4(1), pp. 29-45. ISSN 1726-0531