Items with Subject: construction integration

Abadi, M; Moore, D R and Sammuneh, M A (2021) A framework of indicators to measure project circularity in construction circular economy. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(2), pp. 54-66. ISSN 17514304

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abakporo, R (2017) Challenges of foreign investments in Nigeria's emerging housing construction industry. DM thesis, Colorado Technical University, USA.

Abd El-Razek, M E and Basha, I M (2001) Constructability improvement of bridges using stepping formwork. Journal of Construction Engineering and Management, 127(3), pp. 206-213. ISSN 0733-9364

Abediniangerabi, B; Shahandashti, S M; Ahmadi, N and Ashuri, B (2017) Empirical investigation of temporal association between architecture billings index and construction spending using time-series methods. Journal of Construction Engineering and Management, 143(10): 04017080, ISSN 0733-9364

Abolghasemi, M.; Al-Mhdawi, M. K. S.; Rahimian, F. and Qazi, A. (2026) Exploring the nexus of stakeholder management, project performance and stakeholder satisfaction in Malaysian residential building projects: A PLS-SEM approach. Engineering, Construction and Architectural Management, 33(3), pp. 2089-2117. ISSN 0969-9988

Abudayyeh, O; Dibert-DeYoung, A and Jaselskis, E (2004) Analysis of trends in construction research: 1985-2002. Journal of Construction Engineering and Management, 130(3), pp. 433-439. ISSN 0733-9364

Abujnah, M S (2010) Towards a risk management framework for Libyan house-building projects. PhD thesis, University of Salford, UK.

Adebowale, O J (2018) A multi-stakeholder approach to productivity improvement in the South African construction industry. PhD thesis, Nelson Mandela University, South Africa.

Afzal, Muneeb (2024) Improving request for information (RFI) processing in construction projects using natural language processing (NLP) techniques. PhD thesis, University of Technology Sydney, Australia.

Agapiou, A (2020) Factors influencing the selection of a procurement route for UK off-site housebuilding. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(1), pp. 3-15. ISSN 17514304

Agbola, S B (1983) The housebuilding industry in Osogbo, Nigeria: A study in the transformation of the industry in the process of development. PhD thesis, University of Pennsylvania, USA.

Ahadzie, D K; Proverbs, D G; Olomolaiye, P O and Ankrah, N A (2009) Competencies required by project managers for housing construction in Ghana: Implications for CPD agenda. Engineering, Construction and Architectural Management, 16(4), pp. 353-375. ISSN 0969-9988

Ahmad, A M (2014) The use of refurbishment, flexibility, standardisation and BIM to support the design of a change-ready healthcare facility. PhD thesis, Loughborough University, UK.

Ahmad, T; Aibinu, A A and Stephan, A (2017) Green building projects: Process innovation leading to project innovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ahmed, S and Arocho, I (2022) Implementing a choosing-by-advantages decision-making method to evaluate the critical success factors of mass-timber building materials in the US. Journal of Construction Engineering and Management, 148(10): 05022010, ISSN 0733-9364

Akeremale, I D (2022) Supply chain management in prefabricated housing construction in Nigeria. PhD thesis, University of Newcastle, Australia.

Al Khatib, B A (2021) Determining the delay factors for reconstructed mega-project’s phases and the associated challenges. PhD thesis, University of Malaya, Malaysia.

Al Surf, Mohammed Saied (2014) Challenges facing the application of sustainability to housing in Saudi Arabia. PhD thesis, Queensland University of Technology, Australia.

Al-Ameen, H A (2012) Antitrust: the person-centred approach. PhD thesis, Swansea University, UK.

Al-Hussein, M; Kumar, J; Sharma, V and Mah, D (2006) A knowledge-based automated development permit approval process in the housing industry. Engineering, Construction and Architectural Management, 13(3), pp. 290-306. ISSN 0969-9988

Al-Kayed, A. A.; Rotimi, F. E.; Purushothaman, M. B.; Pawley, M. and Ghaffarian Hoseini, A. (2026) Modelling the enablers of effective digital technology implementation for competitiveness enhancement among subcontracting organisations in new zealand's residential construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 894-919. ISSN 1726-0531

Al-Saleh, F S (1980) A case study and evaluation of a technological delivery system: Construction management in Saudi Arabia. PhD thesis, University of Washington, USA.

Alananga, S; Lucian, C and Kusiluka, M M (2015) Significant cost-push factors in owner-built incremental housing construction in Tanzania. Construction Management and Economics, 33(8), pp. 671-688. ISSN 01446193

Albassami, A A (2014) A framework for international commercialization of innovative products in residential construction: A case of structural insulated panels (SIPs) in the United States and Saudi Arabia. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Alharbi, F (2020) Critical delay factors in housing construction projects in Saudi Arabia: Assessment and solutions. PhD thesis, Nottingham Trent University, UK.

Ali, A H; Kineber, A F; Elyamany, A; Ibrahim, A H and Daoud, A O (2025) Application of Ginni's mean analysis for identifying the stationary driver enhancing modular construction adoption in the building industry. International Journal of Construction Management, 25(3), pp. 322-333. ISSN 1562-3599

Ali, A K (2019) A case study in developing an interdisciplinary learning experiment between architecture, building construction, and construction engineering and management education. Engineering, Construction and Architectural Management, 26(9), pp. 2040-2059. ISSN 0969-9988

Ali, A S; Azmi, N F and Baaki, T K (2018) Cost performance of building refurbishment works: The case of Malaysia. International Journal of Building Pathology and Adaptation, 36(1), pp. 41-62. ISSN 23984708

Alinaitwe, H; Nyamutale, W and Tindiwensi, D (2014) Design phase constructability improvement strategies for highway projects in Uganda. Journal of Construction in Developing Countries, 19(1), pp. 127-140. ISSN 1823-6499

Alketbi, S R (2020) Effective implementation of value engineering in the housing construction programmes of the UAE. PhD thesis, University of Wolverhampton, UK.

Almughrabi, F M; Samarasinghe, D A S and Rotimi, F E (2021) Analysis of skill shortages in prefabricated residential construction: A case for New Zealand. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Alsafouri, S (2017) Information technology and human factors to enhance design and constructability review processes in construction. PhD thesis, Arizona State University, USA.

Alshahrani, A Y (2020) Interpretive investigation into the implementation of sustainable business models within Saudi housing construction industry. PhD thesis, University of Salford, UK.

Alshawi, M and Underwood, J (1996) Improving the constructability of design solutions through an integrated system. Engineering, Construction and Architectural Management, 3(1-2), pp. 47-67. ISSN 0969-9988

Alzayd, R (2015) A constructability methodology to integrate planning and design for workers’ safety in construction management. PhD thesis, Technische Universitaet Carolo-Wilhelmina zu Braunschweig, Germany.

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Amoah, C (2023) Quality management framework for government social housing construction in South Africa. International Journal of Building Pathology and Adaptation, 41(6), pp. 217-236. ISSN 23984708

Andersen, Janthea (2010) An empirical study of design management practices in collaborative design and construction projects: The roles, activities and conceptions of design management across project stages and within the building, civil and process sectors of a construction company. PhD thesis, University of Queensland, Australia.

Anderson, S D; Fisher, D J and Rahman, S P (2000) Integrating constructability into project development: A process approach. Journal of Construction Engineering and Management, 126(2), pp. 81-88. ISSN 0733-9364

Arashpour, M; Wakefield, R; Blismas, N and Abbasi, B (2016) Quantitative analysis of rate-driven and due date-driven construction: Production efficiency, supervision, and controllability in residential projects. Journal of Construction Engineering and Management, 142(1): 05015012, ISSN 0733-9364

Arashpour, M; Wakefield, R; Blismas, N and Lee, E W M (2013) A new approach for modelling variability in residential construction projects. Construction Economics and Building, 13(2), pp. 83-92. ISSN 2204-9029

Arashpour, M; Wakefield, R; Blismas, N and Lee, E W M (2014) Analysis of disruptions caused by construction field rework on productivity in residential projects. Journal of Construction Engineering and Management, 140(2): 04013053, ISSN 0733-9364

Arditi, D; Elhassan, A and Toklu, Y C (2002) Constructability analysis in the design firm. Journal of Construction Engineering and Management, 128(2), pp. 117-126. ISSN 0733-9364

Arias-Jiménez, N.; Trebilcock-Kelly, M.; Figueroa-SanMartín, R. and González-Cáceres, A. (2026) Experimental evaluation of the impact of roofing materials and natural ventilation on attic overheating in a temperate Chilean climate. Building Research & Information, 54(5), pp. 573-587. ISSN 0961-3218

Arif, F and Tahir, S (2025) Housing sector risk assessment using structural equation modeling for small-to-medium sized construction companies and builders in urban areas. International Journal of Construction Management, 25(9), pp. 1058-1071. ISSN 1562-3599

Assaad, R H; Jezzini, Y and Assaf, G (2026) Proposing and exploring integrated trade delivery as a new project delivery method: Assessing the drivers and barriers to its implementation in construction projects. Journal of Construction Engineering and Management, 152(1): 04025215, ISSN 0733-9364

Atkinson, A R and Westall, R (2010) The relationship between integrated design and construction and safety on construction projects. Construction Management and Economics, 28(9), pp. 1007-1017. ISSN 1466433X

Atmaca, N (2017) Life-cycle assessment of post-disaster temporary housing. Building Research & Information, 45(5), pp. 524-538. ISSN 0961-3218

Auchterlounie, A C (2004) A new quality theory for UK private housebuilding based on definable quality principles, impression management and the control of cognitive dissonance. PhD thesis, Heriot-Watt University, UK.

Aunwong, P and Hadikusumo, B H W (2025) Digital 2D and 3D modelling for construction safety management in Thai construction projects. International Journal of Construction Management, 25(15), pp. 1778-1790. ISSN 1562-3599

Awodele, I A; Mewomo, M C and Eze, E C (2023) Inhibitors to the adoption of building information modelling in modular construction: A case study of the Nigerian construction industry. Journal of Construction in Developing Countries, 28(2), pp. 19-36. ISSN 1823-6499

Ayinla, K; Cheung, F and Towe, B (2025) Time-driven activity-based costing (TDABC) model for performance optimization of offsite manufacturing methods housebuilding. Construction Management and Economics, 43(8), pp. 637-656. ISSN 0144-6193

Badran, Y (2020) Analysis of construction and stakeholder risks for Public Private Partnership projects in developing countries: a comparative analysis using Artificial Neural Networks to determine the effect of poor stakeholder management and construction risks on the project's schedule (PPP vs. traditional projects). PhD thesis, University of Salford, UK.

Bailey, K A (1995) The metamorphosis of Battersea, 1800-1914: a building history. PhD thesis, Open University, UK.

Baker, A J (2019) 'Suitable and sufficient'? UK regulation of post-construction fire safety. PhD thesis, University of Edinburgh, UK.

Bakti, E S; Majid, M Z B A; Zin, R M and Trigunarsyah, B (2011) Constructability improvement in seawater intake structure. Engineering, Construction and Architectural Management, 18(6), pp. 595-608. ISSN 0969-9988

Balderston, F E (1953) Scale, vertical integration and costs in residential construction firms. PhD thesis, Princeton University, USA.

Ball, M and Wood, A (1995) How many jobs does construction expenditure generate? Construction Management and Economics, 13(4), pp. 307-318. ISSN 01446193

Ball, R (1999) Developers, regeneration and sustainability issues in the reuse of vacant industrial buildings. Building Research & Information, 27(3), pp. 140-148. ISSN 0961-3218

Banks, C; Kotecha, R; Curtis, J; Dee, C; Pitt, N and Papworth, R (2018) Enhancing high-rise residential construction through design for manufacture and assembly: A UK case study. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(4), pp. 164-174. ISSN 17514304

Barker, R (2006) Waste assessment and application of improvement techniques in UK private housebuilding supply chains. PhD thesis, Cardiff University, UK.

Barlow, C (2012) The Code for Sustainable Homes: what are the innovation implications for the social housing development sector? PhD thesis, University of Salford, UK.

Barlow, J; Childerhouse, P; Gann, D; Hong-Minh, S; Naim, M and Ozaki, R (2003) Choice and delivery in housebuilding: Lessons from Japan for UK housebuilders. Building Research & Information, 31(2), pp. 134-145. ISSN 0961-3218

Barnes, Andrew Floyd (2021) Instructional video object-based learning in a flipped construction management classroom. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Baron, T (1983) The challenge for the UK housing industry in the 1980s and the planning system. Construction Management and Economics, 1(1), pp. 17-29. ISSN 01446193

Barros, B A F S and Sotelino, E D (2023) Constructability and sustainability studies in conceptual projects: A BIM-based approach. Journal of Construction Engineering and Management, 149(4): 04023012, ISSN 0733-9364

Bashford, H H; Walsh, K D and Sawhney, A (2005) Production system loading-cycle time relationship in residential construction. Journal of Construction Engineering and Management, 131(1), pp. 15-22. ISSN 0733-9364

Bates, M; Sturges, J; McGowan, K and Sommerville, J (1999) Material supply in house construction: The potential to enhance performance by improving communication. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Bavi, R (2005) The development of a model design-build specification document for educational facilities construction projects. EdD thesis, Wilmington College (Delaware), USA.

Bee-Hua, G (2000) Evaluating the performance of combining neural networks and genetic algorithms to forecast construction demand: The case of the Singapore residential sector. Construction Management and Economics, 18(2), pp. 209-217. ISSN 01446193

Bell, M R (2019) Home is where the heart(ache) is: Building a regulatory regime for residential construction which more effectively meets community expectations for occupant health and safety. PhD thesis, King's College London, UK.

Bell, T (2018) A detailed investigation into the engineering properties and challenges affecting the potential introduction of a UK grown dowel-laminated timber floor panel into the domestic construction market. PhD thesis, University of Strathclyde, UK.

Berrill, P and Hertwich, E G (2021) Material flows and GHG emissions from housing stock evolution in US counties, 2020–60. Buildings & Cities, 2(1), pp. 599-617. ISSN 2632-6655

Berton, J L (1965) An evaluation of the marketing program of Arkansas lumber manufacturers in selling to the residential construction industry. PhD thesis, University of Arkansas, USA.

Bildsten, L (2014) Buyer-supplier relationships in industrialized building. Construction Management and Economics, 32(1-2), pp. 146-159. ISSN 01446193

Bingham, E; Edward Gibson, G and El Asmar, M (2019) Identifying team selection and alignment factors by delivery method for transportation projects. Journal of Construction Engineering and Management, 145(10): 04019061, ISSN 0733-9364

Binhammer, H H F (1961) A study of the residential construction sector in the Canadian economy. PhD thesis, McGill University, Canada.

Blismas, N; Wakefield, R and Hauser, B (2010) Concrete prefabricated housing via advances in systems technologies: Development of a technology roadmap. Engineering, Construction and Architectural Management, 17(1), pp. 99-110. ISSN 0969-9988

Boardman, B (2007) Examining the carbon agenda via the 40% house scenario. Building Research & Information, 35(4), pp. 363-378. ISSN 0961-3218

Boothman, C and Craig, N (2016) Five star status in the UK house building sector: A realistic indication of customer satisfaction or pure fantasy. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Borg, L and Song, H S (2015) Quality change and implications for productivity development: Housing construction in Sweden 1990-2010. Journal of Construction Engineering and Management, 141(1): 05014014, ISSN 0733-9364

Boser, R A and El-Gafy, M (2011) Accelerating waste minimization in residential construction: A source separation case study. International Journal of Construction Education and Research, 7(1), pp. 58-70. ISSN 1557-8771

Bossink, B A G and Brouwers, H J H (1996) Construction waste: Quantification and source evaluation. Journal of Construction Engineering and Management, 122(1), pp. 55-60. ISSN 0733-9364

Bouchlaghem, K A D and Pasquire, C (2009) An information-led process framework for hybrid projects. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Boussabaine, A H and Elhag, T M S (1999) Knowledge discovery in residential construction project cost data. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Bowers, C T (2019) The next generation of residential construction: Adoption of green building programs, environmentally certified wood products and the transparency of environmental friendliness. PhD thesis, University of Washington, USA.

Boyd, D (2011) An evaluation of a system change in the purchasing of construction materials by local authorities. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Boyd, P; Larsen, G D and Schweber, L (2014) Perspectives on the specification of building integrated photovoltaic (BIPV) technology in construction projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Boyle F, T C (2013) Housing an ageing population: Implications for managing the social housing stock. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Brady, M (1991) Growing a housebuilder: Investigating a context for learning and modeling principles of transpersonal psychology. PhD thesis, Institute of Transpersonal Psychology, USA.

Broer, S (2012) Solutions to climate change in UK housing developments: a lifestyle approach. EngD thesis, University College London, UK.

Brown, V (2004) Making home: A study of recent self-build projects in the UK. PhD thesis, De Montfort University, UK.

Buzzelli, M D (2001) The Canadian urban housebuilding industry: Firm size structure and production methods in Ontario, 1945–2000. PhD thesis, McMaster University, Canada.

Böhme, T; Escribano, A; Heffernan, E E and Beazley, S (2018) Causes and mitigation for declining productivity in the Australian mid-rise residential construction sector. Built Environment Project and Asset Management, 8(3), pp. 253-266. ISSN 2044-124X

Cariaga, I and El-Diraby, T E (2013) Assessing the market potential for housing construction products in Mexico. Journal of Construction Engineering and Management, 139(6), pp. 717-725. ISSN 0733-9364

Castronovo, F (2016) Assessing problem-solving skills in construction education with the virtual construction simulator. PhD thesis, Pennsylvania State University, USA.

Celentano, G (2021) The regenerative development potential of the construction sector in the informal city: The cases of Bangkok, Nairobi and Cape Town. DSc thesis, ETH Zürich, Switzerland.

Chacko, S. J.; Singh, D. P.; Ahuja, V. and Rai, R. S. (2026) Exploring the impact of critical risk interrelationships on design management outcomes in high-rise residential construction projects. Journal of Engineering, Design and Technology, pp. 1-23. ISSN 1726-0531

Chacko, S. J.; Singh, D. P.; Ahuja, V. and Rai, R. S. (2026) Exploring the impact of critical risk interrelationships on design management outcomes in high-rise residential construction projects. Journal of Engineering, Design and Technology, pp. 1-23. ISSN 1726-0531

Chadee, A A; Martin, H; Chadee, X T; Bahadoorsingh, S and Olutoge, F (2023) Root cause of cost overrun risks in public sector social housing programs in sids: Fuzzy synthetic evaluation. Journal of Construction Engineering and Management, 149(11): 04023106, ISSN 0733-9364

Chan, D W M (1998) Modelling construction durations for public housing projects. PhD thesis, University of Hong Kong, Hong Kong.

Chan, T S-F (1996) Residential construction, liquidity constraints, and monetary policy transmission. PhD thesis, Washington University in St. Louis, USA.

Cheetham, D W and Lewis, J (2001) Productivity, buildability and constructability: Is work study the missing link? In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Chelson, D E (2010) The effects of building information modeling on construction site productivity. PhD thesis, University of Maryland, College Park, USA.

Cheng, L and Cao, D (2024) Evolution model and quantitative assessment of risk network in housing construction accidents. Engineering, Construction and Architectural Management, 31(1), pp. 227-246. ISSN 0969-9988

Chiang, Y H and Lok, L K L (2006) Sustainable advantages and corporate strategies: The case of prefabrication in Hong Kong. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Cho, M; Bugg, R; Sattineni, A and Redden, L (2021) Wood waste minimization practices in residential construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Cho, Y (2000) The Korean housebuilding industry: aspects of growth, efficiency and diversification, 1980-1995. PhD thesis, London School of Economics and Political Science, UK.

Cho, Y (2003) The organizational boundaries of housebuilding firms in Korea. Construction Management and Economics, 21(7), pp. 671-680. ISSN 01446193

Chong, H Y; Wang, T; Lee, C Y; Goh, C S and Li, S (2026) Integrating BIM, ar, GPS, and 5g for real-time construction management: Application to water infrastructure projects. Journal of Construction Engineering and Management, 152(5): 05026001, ISSN 0733-9364

Choy, N Y C (2016) The construction of urban design values in volume housing production. PhD thesis, King's College London, UK.

Christofferson, J P (1996) Computer-integrated specification information flow through the residential construction process. PhD thesis, Colorado State University, USA.

Chua, D K H; Kog, Y C; Loh, P K and Jaselskis, E J (1997) Model for construction budget performance: neural network approach. Journal of Construction Engineering and Management, 123(3), pp. 214-222. ISSN 0733-9364

Chung, T H; Abraham, D M and Gokhale, S B (2004) Decision support system for microtunneling applications. Journal of Construction Engineering and Management, 130(6), pp. 835-843. ISSN 0733-9364

Clarke, L and Herrmann, G (2004) Cost vs. Production: Disparities in social housing construction in Britain and Germany. Construction Management and Economics, 22(5), pp. 521-532. ISSN 01446193

Clarke, L and Wall, C (2000) Craft versus industry: The division of labour in European housing construction. Construction Management and Economics, 18(6), pp. 689-698. ISSN 01446193

Cockerill, J E (1993) The construction industry in belfast 1800-1914. PhD thesis, Queen's University Belfast, UK.

Cole, R J and Mitchell, L (1999) Customizing and using GBTool: Two case-study projects. Building Research & Information, 27(4-5), pp. 257-275. ISSN 0961-3218

Comerford, P.; Kinnane, O.; O'Hegarty, R. and Crowe, P. (2026) Embodied carbon impacts of residential development siteworks: New assessment framework. Buildings & Cities, 7(1), pp. 467-487. ISSN 2632-6655

Costantino, N and Pietroforte, R (2004) Production arrangements by us building and non-building contractors: An update. Construction Management and Economics, 22(3), pp. 231-235. ISSN 01446193

Costantino, N; Pietroforte, R and Hamill, P (2001) Subcontracting in commercial and residential construction: An empirical investigation. Construction Management and Economics, 19(4), pp. 439-447. ISSN 01446193

Costin, G; Nakai Kidd, A; Simon, T and Edwards, D J (2019) Collaborative procurement and private-sector housebuilding and refurbishment works: A pilot study investigation of the UK. International Journal of Building Pathology and Adaptation, 37(5), pp. 699-717. ISSN 23984708

Crawley, J; Biddulph, P; Wingfield, J; Ashdown, M; Lowe, R and Elwell, C (2020) Inferring the as-built air permeability of new UK dwellings. International Journal of Building Pathology and Adaptation, 38(1), pp. 3-19. ISSN 23984708

Cuellar Franca, R M (2013) Sustainability assessment framework for the residential construction sector in the UK. PhD thesis, University of Manchester, UK.

Daget, Y T and Zhang, H (2020) Decision-making model for the evaluation of industrialized housing systems in Ethiopia. Engineering, Construction and Architectural Management, 27(1), pp. 296-320. ISSN 0969-9988

Daniel, E I and Oshodi, O (2023) Lean-offsite-simulation nexus for housing construction: A state-of-the-art review of the existing knowledge. Construction Innovation, 23(5), pp. 994-1017. ISSN 1471-4175

Daoud, A O; KhairEldin, M; Ibrahim, A H and Toma, H M (2026) Adaptive neuro-fuzzy inference system for Egyptian residential construction waste prediction. International Journal of Construction Management, 26(6), pp. 1059-1077. ISSN 1562-3599

Darlow, M J (1968) Investigations into line of balance scheduling house building. PhD thesis, Loughborough University, UK.

Darragh, A J R (2001) Patterns of injury among residential construction workers before and after a safety intervention program, 1994-1998. PhD thesis, Colorado State University, USA.

Darwish, M; Elsayed, A Y and Nassar, K (2018) Design and constructability of a novel funicular arched steel truss falsework. Journal of Construction Engineering and Management, 144(3): 04018002, ISSN 0733-9364

Davies, R J (2003) Formulating competitive strategy in the UK housebuilding industry: Executive summary. EngD thesis, University of Warwick, UK.

De Ridder, H A J (1994) Design and construct of complex civil engineering systems: A new approach to organization and contracts. PhD thesis, Delft University of Technology, Netherlands.

Del Solar, P; Del Río, M; Villoria, P and Nadal, A (2016) Analysis of recurrent defects in the execution of ceramic-coatings cladding in building construction. Journal of Construction Engineering and Management, 142(4): 04015093, ISSN 0733-9364

Delgado-Hernandez, D J; Bampton, K E and Aspinwall, E (2007) Quality function deployment in construction. Construction Management and Economics, 25(6), pp. 597-609. ISSN 1466433X

Denowitz, R M (1982) Industries and environments: A comparative study of housebuilding in two suburban areas. PhD thesis, University of Chicago, USA.

Densley Tingley, D (2013) Design for deconstruction: an appraisal. PhD thesis, University of Sheffield, UK.

Deshpande, A S (2009) Best practices for the management of design in fast track industrial projects. PhD thesis, University of Cincinnati, USA.

Deshpande, A S; Salem, O M and Miller, R A (2012) Analysis of the higher-order partial correlation between CII best practices and performance of the design phase in fast-track industrial projects. Journal of Construction Engineering and Management, 138(6), pp. 716-724. ISSN 0733-9364

Dhanasekar, M (2000) Identification of optimal size resources for a repetitive housing construction. Engineering, Construction and Architectural Management, 7(4), pp. 347-361. ISSN 0969-9988

Diab, M F; Varma, A and Panthi, K (2017) Modeling the construction risk ratings to estimate the contingency in highway projects. Journal of Construction Engineering and Management, 143(8): 04017041, ISSN 0733-9364

Ding, G and Forsythe, P (2016) A comparative study of floor construction on sloping sites: An analysis of cumulative energy demand and greenhouse gas emissions. Construction Economics and Building, 16(1), pp. 33-49. ISSN 2204-9029

Ding, G and Forsythe, P J (2013) Sustainable construction: Life cycle energy analysis of construction on sloping sites for residential buildings. Construction Management and Economics, 31(3), pp. 254-265. ISSN 1466433X

Dissanayake, N; Xia, B; Skitmore, M; Trigunarsyah, B and Menadue, V (2026) Developing a generic fuzzy multi-attribute analysis model for EPC contractor selection. Built Environment Project and Asset Management, 16(1), pp. 1-19. ISSN 2044-124X

Dixon, W S (2014) Quantitative tool for measuring safety culture on busy construction sites in Great Britain. DProf thesis, University of Salford, UK.

Dorignon, L; Oswald, D; Kempton, L; Boehme, T; Iyer-Raniga, U; Moore, T and Dalton, T (2024) Investigating residential building materials in a circular economy: An Australian perspective. Journal of Construction Engineering and Management, 150(9): 04024115, ISSN 0733-9364

Dossick, C S and Neff, G (2010) Organizational divisions in BIM-enabled commercial construction. Journal of Construction Engineering and Management, 136(4), pp. 459-467. ISSN 0733-9364

Downey, M (2012) Lowering CO2 emissions in the new build social housing sector: A Spanish case study. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Dowsett, R; Green, M; Sexton, M and Harty, C (2019) Projecting at the project level: MMC supply chain integration roadmap for small housebuilders. Construction Innovation, 19(2), pp. 193-211. ISSN 1471-4175

Doyle, A and Hughes, W P (2000) The influence of project complexity on estimating accuracy. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

DuBois, P J (1996) An efficient method to accurately predict general condition costs in the building construction industry. PhD thesis, Colorado School of Mines, USA.

Dulung, A Z A (2007) Computer aided decision support system for the selection of subcontractors in building refurbishment works. PhD thesis, National University of Singapore, Singapore.

Dunne, J (2007) Design knowledge extraction: A community-based approach to public open space design in Mexico city. Architectural Engineering and Design Management, 3(3), pp. 160-168. ISSN 1745-2007

Dunston, P S; Gambatese, J A and McManus, J F (2005) Assessing state transportation agency constructability implementation. Journal of Construction Engineering and Management, 131(5), pp. 569-578. ISSN 0733-9364

Durdyev, S and Mbachu, J (2018) Key constraints to labour productivity in residential building projects: Evidence from Cambodia. International Journal of Construction Management, 18(5), pp. 385-393. ISSN 1562-3599

Egger, H S (1986) Business techniques and skills utilized by small residential contractors with one to four employees in six high growth areas of Texas. EdD thesis, Texas A&M University, USA.

El Sayed, A Y; Darwish, M and Nassar, K (2021) Design and constructability of novel extendable arched steel truss falsework. Journal of Construction Engineering and Management, 147(3): 04020187, ISSN 0733-9364

El-Adaway, I H; Ali, G G; Abotaleb, I S and Barber, H M (2020) Studying the relationship between stock prices of publicly traded US construction companies and gross domestic product: Preliminary step toward construction-economy nexus. Journal of Construction Engineering and Management, 146(1): 04019087, ISSN 0733-9364

El-Anwar, O and Aziz, T A (2014) Integrated urban-construction planning framework for slum upgrading projects. Journal of Construction Engineering and Management, 140(4): B4014003, ISSN 0733-9364

El-Rayes, K; Ramanathan, R and Moselhi, O (2002) An object-oriented model for planning and control of housing construction. Construction Management and Economics, 20(3), pp. 201-210. ISSN 01446193

Elazouni, A M (1997) Constructability improvement of steel silos during field operations. Journal of Construction Engineering and Management, 123(1), pp. 21-25. ISSN 0733-9364

Eldin, N N (1988) Constructability improvement of project designs. Journal of Construction Engineering and Management, 114(4), pp. 631-640. ISSN 0733-9364

Eldin, N N (1999) Impact of employee, management, and process issues on constructability implementation. Construction Management and Economics, 17(6), pp. 711-720. ISSN 01446193

Eldin, N N and Senouci, A B (1992) Use of scrap tires in road construction. Journal of Construction Engineering and Management, 118(3), pp. 561-576. ISSN 0733-9364

Eleftheriadis, E (2018) Decision-based and BIM-embedded optimisation framework for material, cost and carbon efficiency of RC building structures. PhD thesis, University College London, UK.

Elghamrawy, T M (2011) Optimizing work zone practices for highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Elsayed, M A A; Lastovets, N; Pistore, L and Pelsmakers, S (2024) Summer-time performance of Finnish housing: Poe of five apartments. International Journal of Building Pathology and Adaptation, 43(8), pp. 1-25. ISSN 2398-4708

Elvin, G A (1998) A process model for integrated design and construction. PhD thesis, University of California, Berkeley, USA.

Emmitt, S (2006) Selection and specification of building products: Implications for design managers. Architectural Engineering and Design Management, 2(3), pp. 176-186. ISSN 1745-2007

Emmitt, S and West, B (2003) Incorporating research into an undergraduate module: Learning to detail from first (ecologically sound) principles. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Evans, M (2013) An investigation into occupants' satisfaction in UK sustainable social housing. PhD thesis, University of the West of England, Bristol, UK.

Everett, J G and Kelly, D L (1998) Drywall joint finishing: Productivity and ergonomics. Journal of Construction Engineering and Management, 124(5), pp. 347-353. ISSN 0733-9364

Fadiya, O; Georgakis, P; Chinyio, E and Nwagboso, C (2015) Decision-making framework for selecting ICT-based construction logistics systems. Journal of Engineering, Design and Technology, 13(2), pp. 260-281.

Fadoul, A (2020) A BIM-based model for constructability assessment of buildings design. PhD thesis, University of Nottingham, UK.

Falaq Assad, N; Edwards, D J; Shelbourn, M; Martek, I; Wellington Didibhuku Didibhuku, T and El-Gohary, H (2021) Comparison of modular and traditional UK housing construction: A bibliometric analysis. Journal of Engineering, Design and Technology, 19(1), pp. 164-186. ISSN 1726-0531

Fallon, L J (1984) The role of housing in the economic development of puerto rico, 1950 to 1970. PhD thesis, University of Miami, USA.

Faris, H M A (2020) Improving project collaboration to minimise the energy performance gap in residential construction: case study of Kurdistan. PhD thesis, University of Portsmouth, UK.

Farnsworth, C B; Beveridge, S; Miller, K R and Christofferson, J P (2015) Application, advantages, and methods associated with using BIM in commercial construction. International Journal of Construction Education and Research, 11(3), pp. 218-236. ISSN 1557-8771

Farooghi, F (2020) The effect of natural disasters on construction labor wage fluctuations: A spatial difference-in-difference analysis. PhD thesis, University of Texas at Arlington, USA.

Farrell, A and Sunindijo, R Y (2022) Overcoming challenges of early contractor involvement in local government projects. International Journal of Construction Management, 22(10), pp. 1902-1909. ISSN 1562-3599

Farrow, C B and Reyes, M D (2022) Land-grant university strategic plans: Are university-level service-learning goals aligned with construction programs’ goals? International Journal of Construction Education and Research, 18(4), pp. 333-351. ISSN 1557-8771

Fawzy, O N (1991) The development of the architectural working drawing from the descriptive to the prescriptive: A study in architectural communication. PhD thesis, University of Pennsylvania, USA.

Feiruzi, A (2024) The turnover dynamics of residential buildings. PhD thesis, Lancaster University, UK.

Fereidouni, H G (2011) Factors contributing to the fluctuation in residential construction in Iran. Construction Economics and Building, 11(4), pp. 77-86. ISSN 2204-9029

Few, J F M (2021) Ventilation in occupied homes: measurement, performance and sociotechnical perspectives. PhD thesis, University College London, UK.

Filho, A J (1995) Technological change and informal housebuilding in Brazil. PhD thesis, University College London, UK.

Fini, A A F and Forsythe, P (2020) Barriers to reusing and recycling office fit-out: An exploratory analysis of demolition processes and product features. Construction Economics and Building, 20(4), pp. 42-62. ISSN 2204-9029

Finnimore, B (1986) The industrialisation of building: building systems and social housing in postwar Britain 1942 to 1975. PhD thesis, University College London, UK.

Firman, Tommy (1988) Labor flows and the construction industry: The case of housing development in Bandung, Indonesia. PhD thesis, University of Hawaii at Manoa, USA.

Fischer, J (2010) Translating zero carbon into building design regulation, theories and practices. PhD thesis, University of Manchester, UK.

Fischer, M A and Tatum, C B (1997) Characteristics of design-relevant constructability knowledge. Journal of Construction Engineering and Management, 123(3), pp. 253-260. ISSN 0733-9364

Fisher, D J (1989) Piping erection constructability issues in a semiautomated environment. PhD thesis, University of Texas at Austin, USA.

Fisher, D J; Anderson, S D and Rahman, S P (2000) Integrating constructability tools into constructability review process. Journal of Construction Engineering and Management, 126(2), pp. 89-96. ISSN 0733-9364

Fisher, D J and O’Connor, J T (1991) Constructability for piping automation: Field operations. Journal of Construction Engineering and Management, 117(3), pp. 468-485. ISSN 0733-9364

Fitzpatrick, D J (1977) A technological and economic assessment of housebuilding materials. PhD thesis, University of Surrey, UK.

Forbes, D; El-Haram, M; Horner, M; Hatton, D and Evans, A (2009) Estimating the labour demand for housing construction. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Forcada, N; Macarulla, M and Love, P E D (2013) Assessment of residential defects at post-handover. Journal of Construction Engineering and Management, 139(4), pp. 372-378. ISSN 0733-9364

Forsythe, P (2008) Modelling customer perceived service quality in housing construction. Engineering, Construction and Architectural Management, 15(5), pp. 485-496. ISSN 0969-9988

Forsythe, P (2015) Monitoring customer perceived service quality and satisfaction during the construction process. Construction Economics and Building, 15(1), pp. 19-42. ISSN 2204-9029

Forsythe, P and Ding, G (2014) Greenhouse gas emissions from excavation on residential construction sites. Construction Economics and Building, 14(4), pp. 1-10. ISSN 2204-9029

Forsythe, P J (2007) A conceptual framework for studying customer satisfaction in residential construction. Construction Management and Economics, 25(2), pp. 171-182. ISSN 1466433X

Forsythe, P J (2012) Profiling customer perceived service quality expectations in made-to-order housing construction in Australia. Engineering, Construction and Architectural Management, 19(6), pp. 587-609. ISSN 0969-9988

Forsythe, P J (2016) Construction service quality and satisfaction for a targeted housing customer. Engineering, Construction and Architectural Management, 23(3), pp. 323-348. ISSN 0969-9988

Forsythe, Perry (2003) The role of service quality as a determinant of customer satisfaction in residential construction. PhD thesis, University of New South Wales, Australia.

Francis, A; Padmanabhan, V and Thomas, A (2025) A life cycle assessment-based case study analysis of the sustainability of "vernacular" versus contemporary construction techniques. Engineering, Construction and Architectural Management, 32(9), pp. 6187-6212. ISSN 0969-9988

Fullen, M D (2009) The development, diffusion and evaluation of a fall hazard safety training program for residential construction workers utilizing instructor led and new media delivery. EdD thesis, West Virginia University, USA.

Galbraith, P J (1995) The development of a classification system for construction industry clients. PhD thesis, University of Reading, UK.

Ganah, A A M (2003) The use of computer visualisation in communicating constructability information in UK. Journal of Engineering, Design and Technology, 1(2), pp. 151-167. ISSN 1726-0531

Ganguly, I (2008) Modeling alternatives and visualization of product adoption and usage in the residential construction industry. PhD thesis, University of Washington, USA.

Ganguly, I; Bowers, T; Eastin, I and Cantrell, R (2013) Role of green building programs in enhancing the usage of environmentally certified wood in the U.S. Residential construction industry. International Journal of Construction Education and Research, 9(3), pp. 183-202. ISSN 1557-8771

Gann, D M (1993) Innovation in the built environment: The rise of digital buildings. DPhil thesis, University of Sussex, UK.

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Gardner, Stephen T (2024) Technical and interpersonal skills and characteristics of successful construction project managers. PhD thesis, Griffith University, Australia.

Garsden, B R (1995) Postconstruction evaluation. Journal of Construction Engineering and Management, 121(1), pp. 37-42. ISSN 0733-9364

Gavilan, R M and Bernold, L E (1994) Source evaluation of solid waste in building construction. Journal of Construction Engineering and Management, 120(3), pp. 536-552. ISSN 0733-9364

Gerth, R; Boqvist, A; Bjelkemyr, M and Lindberg, B (2013) Design for construction: Utilizing production experiences in development. Construction Management and Economics, 31(2), pp. 135-150. ISSN 1466433X

Getuli, V; Capone, P; Bruttini, A and Sorbi, T (2022) A smart objects library for BIM-based construction site and emergency management to support mobile VR safety training experiences. Construction Innovation, 22(3), pp. 504-530. ISSN 1471-4175

Ghafoor, S; Kocatürk, T; Hosseini, M R and Weiss, M (2025) Barriers to the deployment of pss for a circular economy in housing: An institutional theory perspective. Smart and Sustainable Built Environment, 14(7), pp. 2090-2111. ISSN 2046-6099

Gibson Jr, G E; McGinnis, C I; Flanigan, W S and Wood, J E (1996) Constructability in public sector. Journal of Construction Engineering and Management, 122(3), pp. 274-280. ISSN 0733-9364

Gilbert, A (2015) Sustainable development and greenspace in housebuilding: rules, roles and responsibilities. PhD thesis, University of Manchester, UK.

Gilkey, D P (2002) Occupational low back pain in residential carpenters: Ergonomic elements of posture and strain. PhD thesis, Colorado State University, USA.

Gilkey, D P; Del Puerto, C L; Keefe, T; Bigelow, P; Herron, R; Rosecrance, J and Chen, P (2012) Comparative analysis of safety culture perceptions among homesafe managers and workers in residential construction. Journal of Construction Engineering and Management, 138(9), pp. 1044-1052. ISSN 0733-9364

Gillen, M E (1996) Nonfatal falls in construction workers: Predictors of injury severity. PhD thesis, University of California, San Francisco, USA.

Gillespie, D and McIlwaine, S (2021) Reducing embodied carbon in the construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Glass, A (2011) Analysis of building-integrated renewable energy systems in modern UK homes. EngD thesis, University of Manchester, UK.

Gledson, B J and Greenwood, D (2014) The implementation and use of 4D BIM and virtual construction. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Goh, B H (1998) Forecasting residential construction demand in Singapore: A comparative study of the accuracy of time series, regression and artificial neural network techniques. Engineering, Construction and Architectural Management, 5(3), pp. 261-275. ISSN 0969-9988

Goldwyn, B (2022) Drawing from local, multi-hazard safety perceptions and engineering assessments for safer housing. PhD thesis, University of Colorado at Boulder, USA.

Goodchild, B and Beatty, C (2000) Assessing the procurement practices of housing associations: A case study of new build in Scotland. Journal of Construction Procurement, 6(1), pp. 20-32. ISSN 1358-9180

Gransberg, D D; Karaca, I and Senadheera, S (2004) Calculating roller requirements for chip seal projects. Journal of Construction Engineering and Management, 130(3), pp. 378-384. ISSN 0733-9364

Gravitt, D D (2004) The development and validation of a bar code based residential construction quality inspection procedure. PhD thesis, Indiana State University, USA.

Grenzfurtner, W and Gronalt, M (2021) Continuous improvement of the industrialised housebuilding order fulfilment process. Construction Innovation, 21(1), pp. 22-39. ISSN 1471-4175

Grenzfurtner, W; Rudberg, M; Mayrhofer, R; Loike, K and Gronalt, M (2022) Performance measurement and management practices of on-site activities in industrialized housebuilding. Construction Management and Economics, 40(4), pp. 239-253. ISSN 01446193

Griffin, M G (2008) The lived experience of first line managers during planned organizational change: A phenomenological study of one firm in the residential construction industry. EdD thesis, George Washington University, USA.

Griffith, A (1984) A critical investigation of factors influencing buildability and productivity. PhD thesis, Heriot-Watt University, UK.

Griffith, A and Sidwell, A C (1997) Development of constructability concepts, principles and practices. Engineering, Construction and Architectural Management, 4(4), pp. 295-310. ISSN 0969-9988

Grimsey, D and Graham, R (1997) PFI in the NHS (Private finance initiative in the UK national health service). Engineering, Construction and Architectural Management, 4(3), pp. 215-231. ISSN 0969-9988

Grobler, K (2000) Improving the effectiveness and image of the building and civil construction process. EngD thesis, University of Johannesburg, South Africa.

Grosskopf, K R and Kibert, C J (2006) Economic incentive framework for sustainable energy use in us residential construction. Construction Management and Economics, 24(8), pp. 839-846. ISSN 1466433X

Gruneberg, S (2008) Modelling the UK built infrastructure market using gross fixed capital formation. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Guan, K; Feng, K and Zeng, S X (2001) Urban housing reform and development in China. Building Research & Information, 29(4), pp. 286-292. ISSN 0961-3218

Guenther, P (2020) A case study of perceptions of asset tracking and inventory management technology in a small construction company. PhD thesis, Wilmington University (Delaware), USA.

Guevara, M; Guevara, J; Vargas, H and Ozuna, A (2011) Promoting good design management practices in colombian construction projects. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Gugel, J G and Russell, J S (1994) Model for constructability approach selection. Journal of Construction Engineering and Management, 120(3), pp. 509-521. ISSN 0733-9364

Gurgun, A P and Koc, K (2020) Contractor prequalification for green buildings: Evidence from Turkey. Engineering, Construction and Architectural Management, 27(6), pp. 1377-1400. ISSN 0969-9988

Görsch, Christopher (2024) Learning to see flow: A worker-centric exploration towards task planning and control in construction. DSc thesis, Aalto University, Finland.

Günhan, S and Arditi, D (2007) Budgeting owner's construction contingency. Journal of Construction Engineering and Management, 133(7), pp. 492-497. ISSN 0733-9364

Hadavi, A (1991) Improvement in construction productivity through goal setting in a unionized environment. PhD thesis, Northwestern University, USA.

Hajirasouli, A; Banihashemi, S; Drogemuller, R; Fazeli, A and Mohandes, S R (2022) Augmented reality in design and construction: Thematic analysis and conceptual frameworks. Construction Innovation, 22(3), pp. 412-443. ISSN 1471-4175

Haller, M and Stehn, L (2011) Evaluation of efficiency in housing construction design. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Hallowell, M and Toole, T M (2009) Contemporary design-bid-build model. Journal of Construction Engineering and Management, 135(6), pp. 540-549. ISSN 0733-9364

Hallsted, B K (2010) Examining motivational factors in selecting spray polyurethane foam insulation for residential construction. PhD thesis, Northcentral University, USA.

Hamilton-MacLaren, F (2013) Alternative, more sustainable, wall construction techniques than brick and block, for new housing in England and Wales. PhD thesis, Loughborough University, UK.

Hamilton-MacLaren, F; Loveday, D and Mourshed, M (2009) The calculation of embodied energy in new build UK housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Han, B and Leite, F (2021) Measuring the impact of immersive virtual reality on construction design review applications: Head-mounted display versus desktop monitor. Journal of Construction Engineering and Management, 147(6): 04021042, ISSN 0733-9364

Hanioglu, M N and Arditi, D (2013) Teaming/timing sequences in hotel development projects. Construction Management and Economics, 31(4), pp. 369-385. ISSN 1466433X

Hanlon, E J and Sanvido, V E (1995) Constructability information classification scheme. Journal of Construction Engineering and Management, 121(4), pp. 337-345. ISSN 0733-9364

Hartman, F T (1993) Construction dispute reduction through an improved contracting process in the Canadian context. PhD thesis, Loughborough University, UK.

Hartmann, T and Fischer, M (2007) Supporting the constructability review with 3D/4D models. Building Research & Information, 35(1), pp. 70-80. ISSN 0961-3218

Hassim, S; Kadir, M R A; Lew, Y L and Sim, Y C (2003) Estimation of minimum working capital for construction projects in Malaysia. Journal of Construction Engineering and Management, 129(4), pp. 369-374. ISSN 0733-9364

Heffernan, E; Pan, W and Liang, X (2012) Delivering zero carbon homes in the UK. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Heffernan, E E (2015) Delivering zero carbon homes and sustainable communities: The potential of group self-build housing in England. PhD thesis, University of Plymouth, UK.

Heineck, L F (1983) On the analyses of activity durations on three house building sites. PhD thesis, University of Leeds, UK.

Heravi Torbati, Amir Hossein (2014) Improving construction management: An investigation into the influences of effective stakeholder involvement on project quality outcomes. PhD thesis, Queensland University of Technology, Australia.

Herring, H (2009) National building stocks: Addressing energy consumption or decarbonization? Building Research & Information, 37(2), pp. 192-195. ISSN 0961-3218

Hiley, A and Yagci, O (2001) The implementation of constructability: A prerequisite in raising the quality of project outcome. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Hinkel, M P (2022) Three essays on labor market regulation in the American construction industry. PhD thesis, Michigan State University, USA.

Hodgson, W (2021) Using participatory housing construction methods to develop small sites in public ownership. PhD thesis, University of London, University College London, UK.

Holley, P W (2016) Learning styles and preferences of field managers in U.S. non-residential construction. PhD thesis, Auburn University, USA.

Holmes, Matthew Ian (2013) The application of structural contingency theory to supply chain management: Developing a strategic model for prefabricated timber systems. PhD thesis, University of Technology Sydney, Australia.

Hooko, D K (1999) The private urban residential development process in Tamale, Ghana: an application of structure and agency institutionalism. PhD thesis, University of Aberdeen, UK.

Hooper, A and Nicol, C (2000) Design practice and volume production in speculative housebuilding. Construction Management and Economics, 18(3), pp. 295-310. ISSN 01446193

Hopkin, T; Lu, S-L; Rogers, P and Sexton, M (2016) Detecting defects in the UK new-build housing sector: A learning perspective. Construction Management and Economics, 34(1), pp. 35-45. ISSN 0144-6193

Hsieh, H H Y (2005) The 1990s Taiwan residential construction boom: A supply side interpretation. Construction Management and Economics, 23(3), pp. 265-284. ISSN 01446193

Hsieh, H Y and Forster, J (2006) Residential construction quality and production levels in Taiwan. Engineering, Construction and Architectural Management, 13(5), pp. 502-520. ISSN 0969-9988

Hu, M; Bergsdal, H; Van Der Voet, E; Huppes, G and Muller, D B (2010) Dynamics of urban and rural housing stocks in China. Building Research & Information, 38(3), pp. 301-317. ISSN 0961-3218

Hua, G B (1996) Residential construction demand forecasting using economic indicators: A comparative study of artificial neural networks and multiple regression. Construction Management and Economics, 14(1), pp. 25-34. ISSN 01446193

Huang, T (2009) Virtual prototyping technologies enhanced construction planning. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Hung, Y H; Smith-Jackson, T and Winchester, W (2011) Use of attitude congruence to identify safety interventions for small residential builders. Construction Management and Economics, 29(2), pp. 113-130. ISSN 1466433X

Hutchings, D M and Christofferson, J P (2004) Management practices of residential construction companies producing 25 or fewer units annually. International Journal of Construction Education and Research, 1(1), pp. 34-44. ISSN 1557-8771

Hutchings, M and Christofferson, J (2005) Factors leading to construction company success: Perceptions of small-volume residential contractors. International Journal of Construction Education and Research, 1(2), pp. 102-111. ISSN 1557-8771

Huuhka, S (2023) Understanding demolition. Buildings & Cities, 4(1), pp. 927-937. ISSN 2632-6655

Huuhka, S; Moisio, M; Salmio, E; Köliö, A and Lahdensivu, J (2023) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings & Cities, 4(1), pp. 212-228. ISSN 2632-6655

Ibem, E O; Aduwo, E B and Uwakonye, O (2012) Adequacy of incremental construction strategy for housing low-income urban residents in Ogun State, Nigeria. Built Environment Project and Asset Management, 2(2), pp. 182-194. ISSN 2044-124X

Ibrahim, A.; Badawy, M. and Hamdy, K. (2026) Modeling interdependent constraints on modular construction: A constraint theory and fuzzy-PLS-SEM approach for developing countries. Journal of Engineering, Design and Technology, 24(3), pp. 734-754. ISSN 1726-0531

Ibrahim, M W; Hanna, A S; Russell, J S; Abotaleb, I S and El-Adaway, I H (2020) Quantitative analysis of the impacts of out-of-sequence work on project performance. Journal of Construction Engineering and Management, 146(8): 04020090, ISSN 0733-9364

Idrus A.B, N J B (2002) Construction related factors influencing the choice of concrete floor systems. Construction Management and Economics, 20(1), pp. 13-19. ISSN 01446193

Ilgın, H E; Karjalainen, M and Pelsmakers, S (2024) Finnish architects' attitudes towards multi-storey timber-residential buildings. International Journal of Building Pathology and Adaptation, 42(3), pp. 352-368. ISSN 23984708

Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks. PhD thesis, University of Alberta, Canada.

Irizarry, J; Meadati, P; Barham, W S and Akhnoukh, A (2012) Exploring applications of building information modeling for enhancing visualization and information access in engineering and construction education environments. International Journal of Construction Education and Research, 8(2), pp. 119-145. ISSN 1557-8771

Ishtiaque, T A; Wondimu, P A and Klakegg, O J (2025) Likelihood of early contractor involvement (ECI) benefits in infrastructure versus building projects: The client's perception. International Journal of Construction Management, 25(10), pp. 1227-1238. ISSN 1562-3599

Ishtiaque, T A; Wondimu, P A; Memic, N; Andersen, B S; Lædre, O and Klakegg, O J (2025) Ranking the benefits of early contractor involvement: a client's perspective. International Journal of Construction Management, 25(6), pp. 728-739. ISSN 1562-3599

Ismail, S; Hon, C K H; Crowther, P; Skitmore, M and Lamari, F (2023) The drivers and challenges of adopting the Malaysia industrialised building system for sustainable infrastructure development. Construction Innovation, 23(5), pp. 1054-1074. ISSN 1471-4175

Jadidoleslami, S; Saghatforoush, E; Heravi, A and Preece, C (2022) A practical framework to facilitate constructability implementation using the integrated project delivery approach: A case study. International Journal of Construction Management, 22(7), pp. 1225-1239. ISSN 1562-3599

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jahren, C T; Ellsworth, B J and Bergeson, K (1999) Constructability test for cold in-place asphalt recycling. Journal of Construction Engineering and Management, 125(5), pp. 325-329. ISSN 0733-9364

Jarkas, A M (2010) The effects of buildability factors on rebar fixing labour productivity of isolated foundations. International Journal of Construction Management, 10(2), pp. 33-51. ISSN 1562-3599

Jarkas, A M (2013) Primary factors influencing bid mark-up size decisions of general contractors in Kuwait. Journal of Financial Management of Property and Construction, 18(1), pp. 53-75. ISSN 1366-4387

Jarkas, A M and Bitar, C G (2014) Factors affecting construction labor productivity in Kuwait. Journal of Construction Engineering and Management, 138(7), pp. 811-820. ISSN 0733-9364

Jarkas, A M and Haupt, T C (2015) Major construction risk factors considered by general contractors in Qatar. Journal of Engineering, Design and Technology, 13(1), pp. 165-194.

Jaselskis, E J and Ashley, D B (1991) Optimal allocation of project management resources for achieving success. Journal of Construction Engineering and Management, 117(2), pp. 321-340. ISSN 0733-9364

Jeong, J G; Hastak, M and Syal, M (2009) Framework of manufacturer-retailer relationship in the manufactured housing construction. Construction Innovation, 9(1), pp. 22-41. ISSN 1471-4175

Jergeas, G and Der Put, J V (2001) Benefits of constructability on construction projects. Journal of Construction Engineering and Management, 127(4), pp. 281-290. ISSN 0733-9364

Jergeas, G F (1989) Detailed design and constructability. PhD thesis, Loughborough University, UK.

Jiang, H; Jin, X H and Liu, C (2013) The effects of the late 2000s global financial crisis on Australia's construction demand. Construction Economics and Building, 13(3), pp. 65-79. ISSN 2204-9029

Jiang, L (2016) A constructability review ontology to support automated rule checking leveraging building information models. PhD thesis, Pennsylvania State University, USA.

Jijingi, A T (2019) A BIM-enabled procurement framework in new buildings for the Nigerian architecture, engineering and construction industry. PhD thesis, University of Portsmouth, UK.

Jiménez-Moreno, P (2020) Mass customisation for zero energy housing: the potential of Japanese manufacturing practices in the context of sustainable housebuilding in the United Kingdom. PhD thesis, University of Edinburgh, UK.

Jin, R; Yang, T; Piroozfar, P; Kang, B G; Wanatowski, D; Hancock, C M and Tang, L (2018) Project-based pedagogy in interdisciplinary building design adopting BIM. Engineering, Construction and Architectural Management, 25(10), pp. 1376-1397. ISSN 0969-9988

Jobe, K (2017) A flexible housing approach for self-help housing in Botswana. PhD thesis, University of Bath, UK.

Johnsson, H and Sardén, Y (2008) Industrialised timber housing: From trial to production. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Johnston, B A (2012) Characterizing virtual prototype constructability programming for the pictographic instruction of procedure. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Johnston, M; Guaralda, M and Sawang, S (2014) Sustainable innovation for Queensland's housing design: A case study. Construction Economics and Building, 14(4), pp. 11-31. ISSN 2204-9029

Jones, A M (1990) Design and construction for traditional house building. PhD thesis, Aston University, UK.

Jonsson, H and Rudberg, M (2015) Production system classification matrix: Matching product standardization and production-system design. Journal of Construction Engineering and Management, 141(6): 05015004, ISSN 0733-9364

Jrade, A (2004) Integrated conceptual cost estimating and life cycle costing system for building projects. PhD thesis, Concordia University, Canada.

Juan, Y K; Lin, I C and Tsai, J X (2019) A hybrid approach to optimize initial design strategies for pre-sale housing projects. Engineering, Construction and Architectural Management, 26(3), pp. 515-534. ISSN 0969-9988

Jung, S-K (1993) A study of single-family residential construction activity: Simultaneous transfer function (STF) analysis. PhD thesis, Georgia State University, USA.

Junga, W J (1981) The building cycle, shorter cycles of residential construction and federal housing programs: An empirical and theoretical analysis. PhD thesis, University of Connecticut, USA.

Kalamaras, G S (1996) A case method approach for interactive risk analysis of tunnel "design-for-constructability" concept. PhD thesis, Pennsylvania State University, USA.

Kamardeen, I (2010) 8d BIM modelling tool for accident prevention through design. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Kapliński, O and Thiel, T (1995) Evaluation of multi-family housing systems in Poland. Construction Management and Economics, 13(4), pp. 291-298. ISSN 01446193

Karadimitriou, N (2007) Re-use of previously developed land: housebuilder adaptation to a changing context. PhD thesis, University College London, UK.

Karmakar, S (2025) Third-party quality control concept, methodology, and implementation in the building and housing construction industry in India. International Journal of Construction Management, 25(9), pp. 1021-1031. ISSN 1562-3599

Kartam, N A (1996) Making effective use of construction lessons learned in project life cycle. Journal of Construction Engineering and Management, 122(1), pp. 14-21. ISSN 0733-9364

Karunaratne, Roshan (2022) Optimisation of prefabricated modular-integrated residential construction using hybrid customisation methods. PhD thesis, University of Melbourne, Australia.

Kasabreh, N S S and Tarawneh, S A (2021) Investigating the impact of contractor's performance on the success of Jordanian residential construction projects. International Journal of Construction Management, 21(5), pp. 468-475. ISSN 1562-3599

Kavaarpuo, G; Tiwari, P and Martel, A (2026) Transaction costs and innovation outcomes: Lessons from early adopters of housebuilding innovations. Construction Innovation, 26(1), pp. 236-259. ISSN 1471-4175

Kedir, F; Hall, D M; Brantvall, S; Lessing, J; Hollberg, A and Soman, R K (2024) Circular information flows in industrialized housing construction: The case of a multi-family housing product platform in Sweden. Construction Innovation, 24(5), pp. 1354-1379. ISSN 1471-4175

Kedir, F N (2022) The performance and potential of industrialized construction for resource-efficient housing construction: A multi-scalar approach across product, system, and context. DSc thesis, ETH Zürich, Switzerland.

Kemmer, S (2018) Development of a method for construction management in refurbishment projects. PhD thesis, University of Huddersfield, UK.

Keskin, F S (2021) Integration of lifecycle assessment into structural intervention scenarios for assessing environmental impacts of vulnerable buildings. PhD thesis, University of Birmingham, UK.

Khalili, A (2013) An IFC-based framework for optimizing level of prefabrication in industrialized building systems. PhD thesis, National University of Singapore, Singapore.

Khanapure, V and Shastri, S (2024) A sustainability assessment framework for high-rise residential projects: A case of India. International Journal of Construction Management, 24(5), pp. 495-502. ISSN 1562-3599

Kiang, Q L (1992) Comparative variability in tender bids for refurbishment and new build work. Construction Management and Economics, 10(3), pp. 263-269. ISSN 01446193

Kifokeris, D and Xenidis, Y (2017) Constructability: Outline of past, present, and future research. Journal of Construction Engineering and Management, 143(8): 04017035, ISSN 0733-9364

Kim, T-y (2001) Trends of selected construction industry practices. PhD thesis, University of Texas at Austin, USA.

Kirby, M; Rotimi, F E and Naismith, N (2025) Factors for improving productivity in the New Zealand residential construction sector. Journal of Engineering, Design and Technology, 23(5), pp. 1712-1728. ISSN 1726-0531

Kiwan, M S A A (1994) Integration of building design and construction information: A neutral object-oriented model. PhD thesis, University of Dundee, UK.

Klitgaard, K A (1987) The organization of work in residential construction. PhD thesis, University of New Hampshire, USA.

Ko, C H and Chung, N F (2014) Lean design process. Journal of Construction Engineering and Management, 140(6): 4014011, ISSN 0733-9364

Koch, C and Buser, M (2015) Sitting between two chairs: Introducing social sustainability in three large Swedish contractor companies. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Kodikara Edirisinghe, R. and Gunathilake, L. (2026) An IoT-based heat stress management system for the construction industry. Engineering, Construction and Architectural Management, 33(3), pp. 2200-2219. ISSN 0969-9988

Koo, Hyun Jeong (2021) Building design quality: Design complexity and BIM applications. Doctor thesis, University of Texas at Austin, USA.

Kraemer, K W (1982) An econometric analysis of residential construction in the U.S., 1964-1980. PhD thesis, State University of New York at Binghamton, USA.

Kucukvar, M (2013) Life cycle sustainability assessment framework for the U.S. Built environment. PhD thesis, University of Central Florida, USA.

Kuo, Vincent (2019) Latent semantic analysis for knowledge management in construction. DSc(Tech) thesis, Aalto University, Finland.

Kurvinen, A; Huovari, J; Lahtinen, M; Sen, T and Saari, A (2024) A dynamic model for estimating the long-term need for repairs and renovations in residential buildings. Building Research & Information, 52(5), pp. 533-550. ISSN 0961-3218

Lam, K-C (2003) Co-ordination of building services and procurement methods for highly serviced buildings. PhD thesis, Loughborough University, UK.

Lam, T Y M; Brock, T and Gale, K S (2025) Is "design and build" suitable for social housing projects in the UK housing crisis? Built Environment Project and Asset Management, 15(4), pp. 863-878. ISSN 2044-124X

Lambers, R; Cheung, F and Skitmore, M (2024) Risk management strategies for common residential construction defects: The case of Queensland, Australia. International Journal of Construction Management, 24(10), pp. 1126-1135. ISSN 1562-3599

Lambers, R; Lamari, F; Skitmore, M and Rajendra, D (2024) Key residential construction defects: A framework for their identification and correlated causes. Construction Innovation, 24(6), pp. 1425-1459. ISSN 1471-4175

Lambers, Rebeca (2019) Development of a model to risk manage construction defects in the residential sector. PhD thesis, Queensland University of Technology, Australia.

Lang, R; Goodier, C and Glass, J (2016) Are housebuilders' production strategies a barrier to offsite construction uptake in the UK? In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Laufer, A; Shapira, A and Goren, I (1998) Implementing an integrative approach to project schedule compression. Engineering, Construction and Architectural Management, 5(1), pp. 82-92. ISSN 0969-9988

Law, M.; Ninan, J.; Wamelink, H.; Jennen, P.; Meulstee, L. and van den Boom, I. (2026) Transition to timber construction: Project level socio-technical processes interpreted through a TIS framework perspective. Construction Management and Economics, 44(6), pp. 397-411. ISSN 0144-6193

Leblanc, H (2012) Knowledge mapping and process modelling to develop a sustainability-related knowledge management strategy for Scottish housing association planned works. PhD thesis, Glasgow Caledonian University, UK.

Leblanc, H; Nitithamyong, P and Thomson, C (2010) Developing a knowledge management framework to promote sustainable social housing refurbishment practices. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Lee, C C (2007) Developing an appropriate methodology for matching project team's knowledge with client's project requirements in refurbishment projects. PhD thesis, Glasgow Caledonian University, UK.

Lee, C C T and Egbu, C (2005) Capturing client needs in refurbishment projects. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Lee, E B (2000) Constructability and productivity analysis for long life pavement rehabilitation strategies (LLPRS). PhD thesis, University of California, Berkeley, USA.

Lee, E B; Harvey, J T and Thomas, D (2005) Integrated design/construction/operations analysis for fast-track urban freeway reconstruction. Journal of Construction Engineering and Management, 131(12), pp. 1283-1291. ISSN 0733-9364

Lee, E B and Ibbs, C W (2005) Computer simulation model: Construction analysis for pavement rehabilitation strategies. Journal of Construction Engineering and Management, 131(4), pp. 449-458. ISSN 0733-9364

Lee, S H; Thomas, S R and Tucker, R L (2005) The relative impacts of selected practices on project cost and schedule. Construction Management and Economics, 23(5), pp. 545-553. ISSN 01446193

Lees, T and Sexton, M (2012) The domestication and use of low and zero carbon technologies in new homes. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Leghissa, G (2019) Collaboration between construction firms and the supply chain for the implementation of innovation strategies. PhD thesis, Loughborough University, UK.

Leghissa, G; Sage, D and Dainty, A (2016) Collaboration between housebuilding firms and suppliers for the implementation of innovation strategies: A strategy-as-practice approach. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Leopold, E and Bishop, D (1983) Design philosophy and practice in speculative housebuilding: Part 2. Construction Management and Economics, 1(3), pp. 233-268. ISSN 01446193

Levander, E and Sardén, Y (2009) Maintenance and operating costs in off-site timber framed housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Li, Mei (2012) A waste management system for small and medium enterprises engaged in office building retrofit projects. PhD thesis, Queensland University of Technology, Australia.

Lim, B; Nepal, M P; Skitmore, M and Xiong, B (2016) Drivers of the accuracy of developers' early stage cost estimates in residential construction. Journal of Financial Management of Property and Construction, 21(1), pp. 4-20. ISSN 1366-4387

Lin, R F Y (2016) The comparative econometric analysis of property and construction markets in commercial and residential sectors for GB and its regions. PhD thesis, University of London, University College London, UK.

Lin, Tong (2025) Offsite construction in the Australian low-rise residential buildings: Application levels and procurement options. PhD thesis, RMIT University, Australia.

Lindgren, J and Emmitt, S (2017) Diffusion of a systemic innovation: A longitudinal case study of a Swedish multi-storey timber housebuilding system. Construction Innovation, 17(1), pp. 25-44. ISSN 1471-4175

Lindgren, J and Koch, C (2021) Does industrialised housing drive sustainable transition? Swedish experiences. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Lindkvist, C (2015) Contextualizing learning approaches which shape BIM for maintenance. Built Environment Project and Asset Management, 5(3), pp. 318-330. ISSN 2044-124X

Liu, D; Lu, W and Niu, Y (2018) Extended technology-acceptance model to make smart construction systems successful. Journal of Construction Engineering and Management, 144(6): 04018035, ISSN 0733-9364

Liu, J and London, K (2011) Analysing the relationship between new housing supply and residential construction costs with the regional heterogeneities. Construction Economics and Building, 11(3), pp. 58-67. ISSN 2204-9029

Liu, M (2013) The application of BIM and IPD in public design and construction. PhD thesis, Polytechnic Institute of New York University, USA.

London, K and Pablo, Z (2017) An actor-network theory approach to developing an expanded conceptualization of collaboration in industrialized building housing construction. Construction Management and Economics, 35(8-9), pp. 553-577. ISSN 0144-6193

Lopez Del Puerto, C; Clevenger, C M; Boremann, K and Gilkey, D P (2014) Exploratory study to identify perceptions of safety and risk among residential Latino construction workers as distinct from commercial and heavy civil construction workers. Journal of Construction Engineering and Management, 140(2): 04013048, ISSN 0733-9364

Loria Arcila, J H (2002) Major issues impacting affordable housing developments in Mexico. PhD thesis, Georgia Institute of Technology, USA.

Lowe, R (2000) Defining and meeting the carbon constraints of the 21st century. Building Research & Information, 28(3), pp. 159-175. ISSN 0961-3218

Lu, W; Olofsson, T and Stehn, L (2011) A lean-agile model of homebuilders' production systems. Construction Management and Economics, 29(1), pp. 25-35. ISSN 1466433X

Lueprasert, K (1996) Constructability knowledge acquisition: A machine learning approach. PhD thesis, Purdue University, USA.

Luiten, G T and Fischer, M A (1998) Opportunities for computer-aided design for construction. Engineering, Construction and Architectural Management, 5(2), pp. 127-136. ISSN 0969-9988

Luo, J; Zadeh, P and Staub-French, S (2024) Ontology-based design features for representing constructability in architectural design: Toward BIM in off-site construction. Journal of Construction Engineering and Management, 150(10): 05024010, ISSN 0733-9364

Luo, J; Zhang, H and Sher, W (2021) A mixed method for measuring incompatibilities between manufacturing approaches and off-site construction. Engineering, Construction and Architectural Management, 28(9), pp. 2516-2548. ISSN 0969-9988

Lynch, H (2014) Passivhaus in the UK: the challenges of an emerging market: a case study of innovation using mixed methods research. PhD thesis, University College London, UK.

Ma, L; Reed, R and Jin, X (2018) Identify the equilibrium of residential construction output: A vector error correction model approach. Engineering, Construction and Architectural Management, 25(1), pp. 21-38. ISSN 0969-9988

Ma, S; Li, Z and Shen, Y (2025) Decision-making framework for selecting sustainable prefabricated residential building technology schemes under minimum assembly rate constraints. Journal of Construction Engineering and Management, 151(8): 04025100, ISSN 0733-9364

Ma, Y (2011) A semiotic framework for buildings performance assessment. PhD thesis, University of Reading, UK.

Mah, D; Manrique, J D; Yu, H; Al-Hussein, M and Nasseri, R (2011) House construction CODN2/DN footprint quantification: A BIM approach. Construction Innovation, 11(2), pp. 161-178. ISSN 1471-4175

Mah, D E (2011) Framework for rating the sustainability of the residential construction practice. PhD thesis, University of Alberta, Canada.

Malesev, S. and Cherry, M. (2021) Digital and social media marketing-growing market share for construction SMEs. Construction Economics and Building, 21(1), pp. 65-82. ISSN 2204-9029

Mamari, M A; Khan, H M; Al Saadi, S and Al Hashim, A (2025) Impact of windcatcher on the thermal comfort and indoor air quality in a modern house. Building Research & Information, 53(1-2), pp. 204-219. ISSN 0961-3218

Manrique, J D; Al-Hussein, M; Bouferguene, A; Safouhi, H and Nasseri, R (2011) Combinatorial algorithm for optimizing wood waste in framing designs. Journal of Construction Engineering and Management, 137(3), pp. 188-197. ISSN 0733-9364

Maraqa, M J; Sacks, R and Spatari, S (2021) Quantitative assessment of the impacts of BIM and lean on process and operations flow in construction projects. Engineering, Construction and Architectural Management, 28(8), pp. 2176-2198. ISSN 0969-9988

Martinez, E; Reid, C K and Tommelein, I D (2019) Lean construction for affordable housing: a case study in Latin America. Construction Innovation, 19(4), pp. 570-593. ISSN 1471-4175

Martins, S S; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Evaluation of 4D BIM tools applicability in construction planning efficiency. International Journal of Construction Management, 22(15), pp. 2987-3000. ISSN 1562-3599

Marzouk, M (2008) A superiority and inferiority ranking model for contractor selection. Construction Innovation, 8(4), pp. 250-268. ISSN 1471-4175

Maslova, S and Burgess, G (2023) Delivering human-centred housing: Understanding the role of post-occupancy evaluation and customer feedback in traditional and innovative social housebuilding in England. Construction Management and Economics, 41(4), pp. 277-292. ISSN 01446193

Masood, R; Roy, K; Gonzalez, V A and Lim, J B P (2024) Ameliorating supply chains of prefabricated housebuilding: An integrated performance framework. Journal of Construction Engineering and Management, 150(6): 04024044, ISSN 0733-9364

Masood, R; Roy, K; Gonzalez, V A; Lim, J B P and Nasir, A R (2025) Modeling relational performance of the supply chains for prefabricated housebuilding in New Zealand. Smart and Sustainable Built Environment, 14(1), pp. 276-302. ISSN 2046-6099

Masood, R; Roy, K; González, V A; Lim, J B P and Nasir, A R (2024) A supply chain perspective of prefabricated housebuilding diffusion in New Zealand. Engineering, Construction and Architectural Management, 31(7), pp. 2697-2720. ISSN 0969-9988

Mattaraia, L; Fabricio, M M and Codinhoto, R (2023) Structure for the classification of disassembly applied to BIM models. Architectural Engineering and Design Management, 19(1), pp. 56-73. ISSN 1745-2007

McCord, J; McCord, M; Davis, P T; Haran, M and Rodgers, W J (2015) Understanding delays in housing construction: Evidence from Northern Ireland. Journal of Financial Management of Property and Construction, 20(3), pp. 286-319. ISSN 1366-4387

McCoy, A; Thabet, W and Badinelli, R (2011) Defining a commercialisation model for residential construction innovation: Industry case studies. Construction Innovation, 11(1), pp. 114-132. ISSN 1471-4175

McCoy, A P (2008) Commercialization for innovative products in the residential construction industry. PhD thesis, Virginia Polytechnic Institute and State University, USA.

McCoy, A P; Thabet, W and Badinelli, R (2008) Towards establishing a domain specific commercialization model for innovation in residential construction. Construction Innovation, 8(2), pp. 137-155. ISSN 1471-4175

McDougall, J A and Swaffield, J A (2007) Transport of deformable solids within building drainage networks. Building Research & Information, 35(2), pp. 220-232. ISSN 0961-3218

McRobert, Alexandra Aimee (2021) Holistic housebuilding: Towards a framework for improving housing affordability. PhD thesis, Monash University, Australia.

Meiling, J H; Sandberg, M and Johnsson, H (2014) A study of a plan-do-check-act method used in less industrialized activities: Two cases from industrialized housebuilding. Construction Management and Economics, 32(1-2), pp. 109-125. ISSN 01446193

Milion, R N; Alves, T d C L and Paliari, J C (2017) Impacts of residential construction defects on customer satisfaction. International Journal of Building Pathology and Adaptation, 35(3), pp. 218-232.

Mills, A; Harris, D and Skitmore, M (2003) The accuracy of housing forecasting in Australia. Engineering, Construction and Architectural Management, 10(4), pp. 245-253. ISSN 0969-9988

Mills, A; Love, P E D and Williams, P (2009) Defect costs in residential construction. Journal of Construction Engineering and Management, 135(1), pp. 12-16. ISSN 0733-9364

Mitropoulos, P and Tajima, V (2022) Constructability opportunities in the engineering design of marine pier structures: A case study. International Journal of Construction Management, 22(3), pp. 366-378. ISSN 1562-3599

Mohamedein, S. M. and Nassar, A. H. (2026) Calculating cost contingency for residential construction projects in Egypt using a machine learning algorithm. International Journal of Construction Management, 26(9), pp. 1761-1776. ISSN 1562-3599

Mohammed, A W (2016) Agent-based modeling of abc methods for decisionmaking in highway bridge projects including uncertainty and several stakeholders. PhD thesis, Western Michigan University, USA.

Mohammed, R E (2007) An exploratory system dynamics model to investigate the relationships between errors that occur in construction documents in Saudi Arabia and their possible causes. PhD thesis, Heriot-Watt University, UK.

Momade, M H; Durdyev, S; Van Tam, N; Shahid, S; Mbachu, J and Momade, Y (2024) Factors influencing adoption of construction technologies in Vietnam's residential construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1002-1018. ISSN 2398-4708

Momennia Rankohi, S (2022) Investigating the concept of integration in construction projects: Cases of integrated project delivery and design for manufacturing and assembly. PhD thesis, Ecole Polytechnique, Montreal, Canada.

Moore, D R; Paterson, G and Martinez, R S (2004) Sustainable communities: A proposal linking the management of forestation and agricultural waste with the development of recyclable housing. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Morland, K V (2020) Multi-level learning of a quality management routine: a UK housebuilder case study. PhD thesis, University of Sheffield, UK.

Morland, K V and Breslin, D (2024) Resolving learning paradoxes within a UK new-build housebuilder. Construction Management and Economics, 42(4), pp. 307-327. ISSN 01446193

Morrow, T K (1998) Effects of selected practices on project cost performance. PhD thesis, University of Texas at Austin, USA.

Morton, R R (1982) The speculative housebuilding industry in the nineteen seventies. PhD thesis, University of Liverpool, UK.

Mostafa, S and Chileshe, N (2018) Application of discrete-event simulation to investigate effects of client order behaviour on off-site manufacturing performance in Australia. Architectural Engineering and Design Management, 14(1-2), pp. 139-157. ISSN 1745-2007

Mostafa, S; Tam, V W; Dumrak, J and Mohamed, S (2020) Leagile strategies for optimizing the delivery of prefabricated house building projects. International Journal of Construction Management, 20(8), pp. 867-881. ISSN 1562-3599

Mselle, J and Sanga, S A (2018) Constraints facing incremental housing construction in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 23(1), pp. 1-20. ISSN 1823-6499

Muir Jr., R W (2015) Application of lean construction principles to highway projects: Analysis of barriers to timely delivery of service. PhD thesis, Drexel University, USA.

Mukhopadhyay, J (2020) Observations of energy consumption and IEQ in a 'tiny house'. Building Research & Information, 48(6), pp. 613-631. ISSN 0961-3218

Mulholland, C; Chan, P W; Canning, K and Ejohwomu, O A (2020) Social value for whom, by whom and when? Managing stakeholder dynamics in a UK megaproject. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(2), pp. 75-86. ISSN 17514304

Mullens, M A and Arif, M (2006) Structural insulated panels: Impact on the residential construction process. Journal of Construction Engineering and Management, 132(7), pp. 786-794. ISSN 0733-9364

Muriro, A (2015) Design and build procurement method in practice: key challenges and practice based enablers. PhD thesis, University of Salford, UK.

Murray, Alex (2018) Returns on public capital investment: Procurement, whole life cost and value in English schools and hospitals, from 1997-2012. PhD thesis, University College London, UK.

Murtaza, I; Rashid, M U and Asad, M (2024) Construction safety challenges and opportunities at design stage for building industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(1), pp. 3-15. ISSN 17514304

Nassri, S; Talebi, S; Elghaish, F; Koohestani, K; McIlwaine, S; Hosseini, M R; Poshdar, M and Kagioglou, M (2023) Labor waste in housing construction projects: An empirical study. Smart and Sustainable Built Environment, 12(2), pp. 325-340. ISSN 2046-6099

Navon, R; Shapira, A and Shechori, Y (2000) Automated rebar constructability diagnosis. Journal of Construction Engineering and Management, 126(5), pp. 389-397. ISSN 0733-9364

Nepal, M P (2011) Automated extraction and querying of construction-specific design features from a building information model. PhD thesis, University of British Columbia, Canada.

Ness, D A (2023) Technological efficiency limitations to climate mitigation: Why sufficiency is necessary. Buildings & Cities, 4(1), pp. 139-157. ISSN 2632-6655

Newton, K L and Chileshe, N (2012) Awareness, usage and benefits of building information modelling (BIM) adoption-the case of South Australian construction organizations. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Ngamthampunpol, D (2008) An assessment of safety management in the Thai construction industry. DSc thesis, George Washington University, USA.

Ngoy, Kabemba Steve; Daweti, Esona; Molise, Relebohile; Chinasamy, Darmarajan and Windapo, Abimbola (2026) Evaluation of sustainable building technologies adoption in housing construction across socio-economic contexts in Cape Town, South Africa. Journal of Construction Business and Management, 8(S1), pp. 140-154. ISSN 2521-0165

Nguyen, T-H (1999) Automated deduction of topological information in a computer-based building design system. PhD thesis, Pennsylvania State University, USA.

Nima, M A; Abdul-Kadir, M R; Jaafar, M S and Alghulami, R G (2001) Constructability implementation: A survey in the Malaysian construction industry. Construction Management and Economics, 19(8), pp. 819-829. ISSN 01446193

Nima, M A; Abdul-Kadir, M R; Jaafar, M S and Alghulami, R G (2002) Constructability concepts in west port highway in Malaysia. Journal of Construction Engineering and Management, 128(4), pp. 348-356. ISSN 0733-9364

Nima, M A; Abdul-Kadir, M R; Jaafar, M S and Alghulami, R G (2004) Constructability concepts in Kuala Selangor cable-stayed bridge in Malaysia. Journal of Construction Engineering and Management, 130(3), pp. 315-321. ISSN 0733-9364

Noyce, D A and Hanna, A S (1997) Planned schedule compression concept file for electrical contractors. Journal of Construction Engineering and Management, 123(2), pp. 189-197. ISSN 0733-9364

Nwal, S S; Panuwatwanich, K and Naing, M (2024) Critical factors influencing the performance of public housing construction projects in Myanmar. Journal of Construction in Developing Countries, 29(1), pp. 163-190. ISSN 1823-6499

O'Connor, J T (1983) Improving industrial project constructability (productivity, value engineering). PhD thesis, University of Texas at Austin, USA.

O'Connor, J T and El-Diraby, T E (2000) Urban freeway bridge reconstruction planning: Case of mockingbird bridge. Journal of Construction Engineering and Management, 126(1), pp. 61-67. ISSN 0733-9364

O'Connor, J T; Larimore, M A and Tucker, R L (1986) Collecting constructability improvement ideas. Journal of Construction Engineering and Management, 112(4), pp. 463-475. ISSN 0733-9364

O'Connor, J T and Tucker, R L (1986) Industrial project constructability improvement. Journal of Construction Engineering and Management, 112(1), pp. 69-82. ISSN 0733-9364

Oey, M (2001) Effects of selected practices on the cost performance of building projects. PhD thesis, University of Texas at Austin, USA.

Oh, E H; Naderpajouh, N; Hastak, M and Gokhale, S (2016) Integration of the construction knowledge and expertise in front-end planning. Journal of Construction Engineering and Management, 142(2): 04015067, ISSN 0733-9364

Ohemeng, F A (1998) Rehabilitation versus demolition and redevelopment: A value-based decision framework for private commercial properties. PhD thesis, University of Salford, UK.

Oladapo, O and Liyanage, C L (2010) Control of healthcare associated infections: A concerted effort. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Orstavik, F (2014) Innovation as re-institutionalization: A case study of technological change in housebuilding in Norway. Construction Management and Economics, 32(9), pp. 857-873. ISSN 01446193

Oshoniyi, A O (2014) Ethnicity and hiring: Phenomenological study of employees' perception in housing construction industry, Lagos state, Nigeria. DM thesis, University of Phoenix, USA.

Ospina-Alvarado, A M and Castro-Lacouture, D (2010) Holistic analysis of fuel cells for residential construction in the rural USA. Construction Innovation, 10(1), pp. 60-74. ISSN 1471-4175

Osuizugbo, I C; Okolie, K C; Oshodi, O S and Oyeyipo, O O (2023) Buildability in the construction industry: A systematic review. Construction Innovation, 23(5), pp. 1300-1322. ISSN 1471-4175

Oti, A H (2014) Building information modelling for sustainability appraisal of conceptual design of steel-framed buildings. PhD thesis, University of Nottingham, UK.

Oussadou, A (1988) Residential satisfaction in the new urban housing projects in Algeria: a case study of Ain-Allah, Algiers. PhD thesis, University of Nottingham, UK.

Oyedele, L O; Wai Tham, K; Jaiyeoba, B E and Fadeyi, M O (2003) Model for predicting architect's performance in building delivery process. Journal of Engineering, Design and Technology, 1(2), pp. 168-186. ISSN 1726-0531

Oyegoke, A S (2007) Specialist task organisations procurement approach for re-engineering construction project processes. DSc thesis, Teknillinen Korkeakoulu (Helsinki), Finland.

Oyenuga, A (2016) Economic and environmental impact assessment of construction and demolition waste recycling and reuse using LCA and MCDA management tools. PhD thesis, London South Bank University, UK.

Ozaki, R (2003) Customer-focused approaches to innovation in housebuilding. Construction Management and Economics, 21(6), pp. 557-564. ISSN 01446193

Ozols, R and Fortune, C (2012) Towards the identification of factors affecting the development of small sized construction contacting organisations. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

O’Connor, J T (1985) Impacts of constructability improvement. Journal of Construction Engineering and Management, 111(4), pp. 404-410. ISSN 0733-9364

O’Connor, J T and Davis, V S (1988) Constructability improvement during field operations. Journal of Construction Engineering and Management, 114(4), pp. 548-564. ISSN 0733-9364

O’Connor, J T; Rusch, S E and Schulz, M J (1987) Constructability concepts for engineering and procurement. Journal of Construction Engineering and Management, 113(2), pp. 235-248. ISSN 0733-9364

Pablo, Z; London, K and Wong, P (2017) Adapting novel research techniques to analyse collaboration in offsite manufacturing housing construction innovations. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Pablo, Z; London, K; Wong, P S P and Khalfan, M (2021) Actor-network theory and the evolution of complex adaptive supply networks. Construction Innovation, 21(4), pp. 668-684. ISSN 1471-4175

Pablo, Z and London, K A (2020) Stable relationality and dynamic innovation: Two models of collaboration in SME-driven offsite manufacturing supply chains in housing construction. Engineering, Construction and Architectural Management, 27(7), pp. 1553-1577. ISSN 0969-9988

Padala, S P S and M Skanda, P (2025) BIM-based multi-objective optimization framework for volumetric analysis of building projects. Journal of Engineering, Design and Technology, 23(5), pp. 1326-1347. ISSN 1726-0531

Palaniappan, S (2009) Environmental performance of on-site construction processes in post-tensioned slab foundation construction: A study of production home building in the Greater Phoenix area. PhD thesis, Arizona State University, USA.

Palaniappan, S; Bashford, H; Li, K; Fafitis, A and Stecker, L (2009) Carbon emissions based on transportation for post-tensioned slab foundation construction: A production home building study in the greater phoenix arizona area. International Journal of Construction Education and Research, 5(4), pp. 236-260. ISSN 1557-8771

Pan, W (2006) A decision support tool for optimising the use of offsite technologies in housebuilding. PhD thesis, Loughborough University, UK.

Pan, W (2010) Strategies for managing innovation in UK housebuilding. Engineering, Construction and Architectural Management, 17(1), pp. 78-88. ISSN 0969-9988

Pan, W; Dainty, A R J and Gibb, A G F (2004) Managing innovation: A focus on off-site production (OSP) in the UK housebuilding industry. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Pan, W; Dainty, A R J and Gibb, A G F (2012) Establishing and weighting decision criteria for building system selection in housing construction. Journal of Construction Engineering and Management, 138(11), pp. 1239-1250. ISSN 0733-9364

Pan, W; Gibb, A G F and Dainty, A R J (2008) Leading UK housebuilders' utilization of offsite construction methods. Building Research & Information, 36(1), pp. 56-67. ISSN 0961-3218

Park, M; Lee, M H; Lee, H S and Hwang, S (2010) Boost, control, or both of Korean housing market: 831 countermeasures. Journal of Construction Engineering and Management, 136(6), pp. 693-701. ISSN 0733-9364

Park, T; Kim, M K; Kim, C and Kim, H (2009) Interactive 3D CAD for effective derrick crane operation in a cable-stayed bridge construction. Journal of Construction Engineering and Management, 135(11), pp. 1261-1270. ISSN 0733-9364

Pasha, A H S (1984) The provision of affordable housing in Central Sudan. PhD thesis, University of Bristol, UK.

Pasquire, C (2012) Positioning lean within an exploration of engineering construction. Construction Management and Economics, 30(8), pp. 673-685. ISSN 1466433X

Pasquire, C; Ballard, G; Bildsten, L; Björnfot, A and Sandberg, E (2011) Value-driven purchasing of kitchen cabinets in industrialised housing. Journal of Financial Management of Property and Construction, 16(1), pp. 73-83. ISSN 1366-4387

Patriarca, A S (2013) Safety at the margins: A rhetorical analysis of occupational risk communication in construction. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Patty, R M (1993) A construction engineering platform for the integration of constructability concepts and lessons learned at the point of design. PhD thesis, Purdue University, USA.

Payne, S L (2009) The institutional capacity of the UK speculative housebuilding industry – responding to the brownfield development policy agenda. PhD thesis, University of Glasgow, UK.

Pellegrino, R; Costantino, N; Pietroforte, R and Sancilio, S (2012) Construction of multi-storey concrete structures in Italy: Patterns of productivity and learning curves. Construction Management and Economics, 30(2), pp. 103-115. ISSN 1466433X

Perera, G; Tennakoon, T; Kulatunga, U; Jayasena, H S and Wijewickrama, M (2021) Selecting suitable procurement system for steel building construction. Built Environment Project and Asset Management, 11(4), pp. 611-626. ISSN 2044-124X

Peri, C A (2003) Impact of media on spatial communication: From paper to collaborative virtual environments. PhD thesis, University of California, Berkeley, USA.

Pietroforte, R and Bon, R (1999) The Italian residential construction sector: An input-output historical analysis. Construction Management and Economics, 17(3), pp. 297-303. ISSN 01446193

Pietroforte, R; Gregori, T and Falagario, M (2009) The changing input structure of the US construction industry: A longitudinal analysis. Construction Management and Economics, 27(11), pp. 1089-1098. ISSN 1466433X

Pirzadeh, P; Lingard, H and Blismas, N (2020) A multilevel socio-technical perspective on work health and safety related design decision making. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Pirzadeh, P; Lingard, H and Blismas, N (2021) Design decisions and interactions: A sociotechnical network perspective. Journal of Construction Engineering and Management, 147(10): 04021110, ISSN 0733-9364

Pocock, J B; Hyun, C T; Liu, L Y and Kim, M K (1996) Relationship between project interaction and performance indicators. Journal of Construction Engineering and Management, 122(2), pp. 165-176. ISSN 0733-9364

Pocock, J B; Kuennen, S T; Gambatese, J and Rauschkolb, J (2006) Constructability state of practice report. Journal of Construction Engineering and Management, 132(4), pp. 373-383. ISSN 0733-9364

Potseluyko Amobi, L (2021) Improving business and technical operations within timber frame self-build housing sector by applying integrated VR/AR and BIM technologies. PhD thesis, Teesside University, UK.

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Power, W; Sinnott, D and Lynch, P (2024) Takt complementing Last Planner® system on residential construction projects. Construction Economics and Building, 24(4-5), pp. 58-80. ISSN 2204-9029

Presland, A J (2023) "Picturing construction, constructing identities: the photographic archive of John Laing & Son Ltd". PhD thesis, University College London, UK.

Priven, V and Sacks, R (2015) Effects of the last planner system on social networks among construction trade crews. Journal of Construction Engineering and Management, 141(6): 04015006, ISSN 0733-9364

Priven, V and Sacks, R (2016) Impacts of the social subcontract and last planner system interventions on the trade-crew workflows of multistory residential construction projects. Journal of Construction Engineering and Management, 142(7): 4016013, ISSN 0733-9364

Pugh, T E (1994) Design-construction interface performance on traditional capital improvement projects. PhD thesis, University of Texas at Austin, USA.

Pulaski, M H (2005) The alignment of sustainability and constructability: A continuous value enhancement process. PhD thesis, Pennsylvania State University, USA.

Pulaski, M H and Horman, M J (2005) Continuous value enhancement process. Journal of Construction Engineering and Management, 131(12), pp. 1274-1282. ISSN 0733-9364

Pulaski, M H and Horman, M J (2005) Organizing constructability knowledge for design. Journal of Construction Engineering and Management, 131(8), pp. 911-919. ISSN 0733-9364

Punwani, A (1997) A study of the growth-investment-financing nexus of the major UK construction groups. Construction Management and Economics, 15(4), pp. 349-361. ISSN 01446193

Qasem, A and Almohassen, A S (2025) A virtual reality-based constructability index for construction projects. Construction Innovation, 25(2), pp. 442-460. ISSN 1471-4175

Quarmby, T (2011) Safe, healthy and sustainable demolition. PhD thesis, Loughborough University, UK.

Quigley, D; Perara, S and Heaney, G (2007) Identifying the optimum balance across capital, life-cycle and environmental costs in new build construction projects. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Radtke, M W and Russell, J S (1993) Project-level model process for implementing constructability. Journal of Construction Engineering and Management, 119(4), pp. 813-831. ISSN 0733-9364

Rahmani, F (2021) Challenges and opportunities in adopting early contractor involvement (ECI): Client's perception. Architectural Engineering and Design Management, 17(1-2), pp. 67-76. ISSN 1745-2007

Rajagopalan, N (2011) Residential life cycle assessment modeling for green buildings and building products. PhD thesis, University of Pittsburgh, USA.

Ranasinghe, U; Jefferies, M; Davis, P and Pillay, M (2023) Enabling a resilient work environment: An analysis of causal relationships between resilience engineering factors in construction refurbishment projects. Journal of Construction Engineering and Management, 149(9): 04023078, ISSN 0733-9364

Rashid, R A (1998) A model for an effective implementation of the government technology transfer policy in the Malaysian construction industry. PhD thesis, University of Reading, UK.

Rausch, C; Sanchez, B and Haas, C (2021) Topology optimization of architectural panels to minimize waste during fabrication: Algorithms for panel unfolding and nesting. Journal of Construction Engineering and Management, 147(7): 2089, ISSN 0733-9364

Raviv, G; Shapira, A and Sacks, R (2022) Empirical investigation of the applicability of constructability methods to prevent design errors. Built Environment Project and Asset Management, 12(1), pp. 53-69. ISSN 2044-124X

Reposa Jr, J H (2009) Comparison of usgbc LEED for homes and the nahb national green building program. International Journal of Construction Education and Research, 5(2), pp. 108-120. ISSN 1557-8771

Ribeiro, F L (1998) Project delivery methods for large scale building projects: A case study. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Robertson, Aaron D (2026) Towards a new housebuilding paradigm: A systems theory approach to supply chain reconfiguration. PhD thesis, University of Salford, UK.

Rockow, Z R (2020) Qualitative & quantitative analyses of existing buildings’ adaptability. PhD thesis, Clemson University, USA.

Rodger, R G (1976) Scottish urban housebuilding, 1870-1914. PhD thesis, University of Edinburgh, UK.

Rogers, J D (1953) Flexibility in the housebuilding industry: The san francisco bay area case. PhD thesis, Massachusetts Institute of Technology, USA.

Rogers, M (2000) Using ELECTRE to aid the choice of housing construction process within structural engineering. Construction Management and Economics, 18(3), pp. 333-342. ISSN 01446193

Roos, J A (2002) Defining and analyzing innovators in the Japanese residential construction market. PhD thesis, University of Washington, USA.

Rosenfeld, Y (2009) Cost of quality versus cost of non-quality in construction: The crucial balance. Construction Management and Economics, 27(2), pp. 107-117. ISSN 1466433X

Rotimi, F E; Tookey, J; Craig, N and Rotimi, J O B (2011) Opportunities for defect reporting in new residential buildings: A case for New Zealand. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Roupé, M (2013) Development and implementations of virtual reality for decision-making in urban planning and building design. PhD thesis, Chalmers University of Technology, Sweden.

Rowings, J E and Kaspar, S L (1991) Constructability of cable-stayed bridges. Journal of Construction Engineering and Management, 117(2), pp. 259-278. ISSN 0733-9364

Roy, R and Gaze, C (1999) Introduction of new technology for a customer-focused speculative housebuilding industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Royal, S; Lehoux, N and Blanchet, P (2022) New home warranty schemes: Developing a theoretical comparative framework using qualitative content analysis. International Journal of Building Pathology and Adaptation, 40(4), pp. 499-522. ISSN 23984708

Royal, S; Lehoux, N and Blanchet, P (2023) Comparative case study research: An international analysis of nine home warranty schemes. International Journal of Building Pathology and Adaptation, 41(4), pp. 789-824. ISSN 23984708

Russell, J S and Gugel, J G (1993) Comparison of two corporate constructability programs. Journal of Construction Engineering and Management, 119(4), pp. 769-784. ISSN 0733-9364

Russell, J S; Gugel, J G and Radtke, M W (1994) Comparative analysis of three constructability approaches. Journal of Construction Engineering and Management, 120(1), pp. 180-195. ISSN 0733-9364

Saghatforoush, Ehsan (2014) Extension of constructability to include operation and maintenance for infrastructure projects. PhD thesis, Queensland University of Technology, Australia.

Said, H M and Reginato, J (2018) Impact of design changes on virtual design and construction performance for electrical contractors. Journal of Construction Engineering and Management, 144(1): 04017097, ISSN 0733-9364

Saied al Surf, M; Trigunarsyah, B and Susilawati, C (2013) Saudi Arabia's sustainable housing limitations: The experts' views. Smart and Sustainable Built Environment, 2(3), pp. 251-271. ISSN 2046-6099

Samarasinghe, D A S (2014) Building materials supply chains: An evaluative study of the New Zealand residential construction. PhD thesis, Auckland University of Technology, New Zealand.

Samasoni, J C (2017) Evaluating the feasibility of implementing a risk-based inspection scheme by building consent authorities in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Sammour, F; Alkailani, H; Sweis, G J; Sweis, R J; Maaitah, W and Alashkar, A (2024) Forecasting demand in the residential construction industry using machine learning algorithms in Jordan. Construction Innovation, 24(5), pp. 1228-1254. ISSN 1471-4175

Sandanayake, M; Yang, W; Chhibba, N and Vrcelj, Z (2022) Residential building defects investigation and mitigation: a comparative review in Victoria, Australia, for understanding the way forward. Engineering, Construction and Architectural Management, 29(9), pp. 3689-3711. ISSN 0969-9988

Sanford, Heather L (2020) Experiences millennial women have used to improve their opportunities for leadership roles in construction. DM thesis, Colorado Technical University, USA.

Sanga, S A and Lucian, C (2016) Cost shares and factor-cost ratios in owner-built incremental housing in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 21(1), pp. 113-130. ISSN 1823-6499

Santero, N J (2009) Pavements and the environment: A life-cycle assessment approach. PhD thesis, University of California, Berkeley, USA.

Sapountzis, S (2013) An investigation into the development of an effective benefits realisation process for healthcare infrastructure projects. PhD thesis, University of Salford, UK.

Sarden, Y and Stehn, L (2006) Industrialisation as a tool for reducing uncertainty in construction. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Sassi, P (2009) Closed loop material cycle construction: defining and assessing closed loop material cycle construction as a component of a comprehensive approach to sustainable material design in the context of sustainable building. PhD thesis, Cardiff University, UK.

Sawhney, A; Walsh, K D; Bashford, H H and Palaniappan, S (2009) Impact of inspected buffers on production parameters of construction processes. Journal of Construction Engineering and Management, 135(4), pp. 319-329. ISSN 0733-9364

Sazalli, S A H; Greenwood, D; Morton, D and Agnew, B (2012) Industrialized building system in Malaysian housing: An emerging innovation system explanation. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Schiller, G (2007) Urban infrastructure: Challenges for resource efficiency in the building stock. Building Research & Information, 35(4), pp. 399-411. ISSN 0961-3218

Schoenwitz, M (2014) Aligning product and processes to customer needs in prefabricated house building. PhD thesis, Cardiff University, UK.

Schoenwitz, M; Naim, M and Potter, A (2012) The nature of choice in mass customized house building. Construction Management and Economics, 30(3), pp. 203-219. ISSN 1466433X

Schoenwitz M, G J and Naim M, P A (2013) How to build what buyers want: Unveiling customer preferences for prefabricated homes. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Schweber, L. and Green, M. (2026) Negotiating net-zero carbon: An ant analysis of two buildings. Buildings & Cities, 7(1), pp. 791-807. ISSN 2632-6655

Sezer, A A and Bosch-Sijtsema, P (2022) Actor-to-actor tensions influencing waste management in building refurbishment projects: A service ecosystem perspective. International Journal of Construction Management, 22(9), pp. 1690-1699. ISSN 1562-3599

Shafik, M and Martin, P (2006) The impact of procurement methods on the Scottish housebuilding industry. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Shahi, S; Beesley, P and Haas, C T (2023) Creating space and time for innovation: a methodology for building adaptation design appraisal using physics-based simulation tools and interactive multi-objective optimization. Engineering, Construction and Architectural Management, 30(3), pp. 1098-1121. ISSN 0969-9988

Shahparvari, M (2023) Minimisation of rework in UK housing construction: contribution of subcontractors. PhD thesis, London South Bank University, UK.

Sharma, V; Al-Hussein, M and Abourizk, S M (2006) Residential construction lot grading approval process optimization: Case study of city of Edmonton. Journal of Construction Engineering and Management, 132(12), pp. 1225-1233. ISSN 0733-9364

Shayboun, M; Kifokeris, D and Koch, C (2019) Construction planning with machine learning. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Shehu, Z; Holt, G D; Endut, I R and Akintoye, A (2015) Analysis of characteristics affecting completion time for Malaysian construction projects. Built Environment Project and Asset Management, 5(1), pp. 52-68. ISSN 2044-124X

Sheibani, G and Havard, T (2005) The government role in housing in libya during the period 1970: 2000. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Shewchuk, J P and Guo, C (2012) Panel stacking, panel sequencing, and stack locating in residential construction: Lean approach. Journal of Construction Engineering and Management, 138(9), pp. 1006-1016. ISSN 0733-9364

Shook, S R (1997) Innovation and the United States residential construction industry: An integrated model of determinants of firm innovativeness for engineered wood products. PhD thesis, University of Washington, USA.

Siebert, M (2019) Concrete and the barriers to innovation in UK housebuilding. PhD thesis, University of Nottingham, UK.

Sikorsky, C S (1990) Product and process integration for the US design-construction industry. PhD thesis, Texas A&M University, USA.

Skitmore, M and Drew, D (2003) The analysis of pre-tender building price forecasting performance: A case study. Engineering, Construction and Architectural Management, 10(1), pp. 36-42. ISSN 0969-9988

Slater, R and Radford, A (2008) Perceptions in the Australian building industry of deficiencies in architects' design documentation and the effects on project procurement. Construction Economics and Building, 8(1), pp. 23-33. ISSN 2204-9029

Slaughter, E S (1991) "Rapid" innovation and integration of components: Comparison of user and manufacturer innovations through a study of residential construction. PhD thesis, Massachusetts Institute of Technology, USA.

Smith, J P; Miller, K; Christofferson, J and Hutchings, M (2011) Best practices for dealing with price volatility in utah's residential construction market. International Journal of Construction Education and Research, 7(3), pp. 210-225. ISSN 1557-8771

Smith, W N; Smith, J and Bingham, E D (2022) Current state of practice associated with the use of building information modeling (BIM) in the custom home building industry. International Journal of Construction Education and Research, 18(3), pp. 251-269. ISSN 1557-8771

Sobieraj, J and Metelski, D (2023) Identification of the key investment project management factors in the housing construction sector in Poland. International Journal of Construction Management, 23(1), pp. 1-12. ISSN 1562-3599

Sodagar, B; Rai, D; Jones, B; Wihan, J and Fieldson, R (2011) The carbon-reduction potential of straw-bale housing. Building Research & Information, 39(1), pp. 51-65. ISSN 0961-3218

Soetanto, R and Pan, W (2009) Strategic planning of UK housebuilders: Case study of a major property developer. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Sommerville, J; Craig, N and Charles, A (2011) No-fines homes: The make or break question? In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Song, Y (2007) Intermediate function analysis for improving constructability. PhD thesis, National University of Singapore, Singapore.

Song, Y and Chua, D K H (2006) Modeling of functional construction requirements for constructability analysis. Journal of Construction Engineering and Management, 132(12), pp. 1314-1326. ISSN 0733-9364

Song, Y and Chua, D K H (2007) Temporal logic representation schema for intermediate function. Journal of Construction Engineering and Management, 133(4), pp. 277-286. ISSN 0733-9364

Songer, A D; Molenaar, K R and Robinson, G D (1996) Selection factors and success criteria for design-build in the USA and UK. Journal of Construction Procurement, 2(2), pp. 69-82. ISSN 1358-9180

Sospeter, N G and Awuzie, B O (2024) Capital budgeting implementation by public sector construction firms in tanzania's housebuilding industry: An exploratory study. Journal of Construction in Developing Countries, 29(1), pp. 87-109. ISSN 1823-6499

Spearman, P (2015) Using sustainable development as a competitive strategy. DBA thesis, Walden University, USA.

Stamatiadis, N; Goodrum, P; Shocklee, E and Wang, C (2014) Quantitative analysis of state transportation agency's experience with constructability reviews. Journal of Construction Engineering and Management, 140(2): 04013043, ISSN 0733-9364

Staub-French, S; Pilon, A; Poirier, E; Fallahi, A; Kasbar, M; Calderon, F; Teshnizi, Z and Froese, T (2022) Construction process innovation on brock commons tallwood house. Construction Innovation, 22(1), pp. 1-22. ISSN 1471-4175

Steinhardt, D A and Manley, K (2016) Exploring the beliefs of Australian prefabricated house builders. Construction Economics and Building, 16(2), pp. 27-41. ISSN 2204-9029

Stiles, S (2019) Investigation of safety leadership within infrastructure engineering construction projects. PhD thesis, University of Nottingham, UK.

Stocks, S N and Singh, A (1999) Studies on the impact of functional analysis concept design on reduction in change orders. Construction Management and Economics, 17(3), pp. 251-267. ISSN 01446193

Stoy, C; Pollalis, S and Schalcher, H R (2008) Drivers for cost estimating in early design: Case study of residential construction. Journal of Construction Engineering and Management, 134(1), pp. 32-39. ISSN 0733-9364

Sturges, J and Bates, M (2000) Thriving on chaos: The result of poor planning: Some views from the housebuilding sector. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Sullivan, S (2007) Construction and behavior of precast bridge deck panel systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Suárez, J L; Gosselin, L and Lehoux, N (2023) Analysing value creation in social housing construction in remote communities: application to nunavik (Canada). Built Environment Project and Asset Management, 13(4), pp. 493-508. ISSN 2044-124X

Swiggum, K E; Anderson, S D and Russell, J S (1994) Case study of burlington cable-stayed bridge. Journal of Construction Engineering and Management, 120(3), pp. 649-666. ISSN 0733-9364

Taghaddos, H; Heydari, M H and Asgari, A H (2021) A hybrid simulation approach for site layout planning in construction projects. Construction Innovation, 21(3), pp. 417-440. ISSN 1471-4175

Talvitie, I; Amiri, A and Junnila, S (2024) Spatiotemporal evaluation of embodied carbon in urban residential developmentSpatiotemporal evaluation of embodied carbon in urban residential development. Buildings & Cities, 5(1), pp. 704-722. ISSN 2632-6655

Tam, V W Y; Tam, C M and Ng, W C Y (2007) On prefabrication implementation for different project types and procurement methods in Hong Kong. Journal of Engineering, Design and Technology, 5(1), pp. 68-80. ISSN 1726-0531

Tan, Loke Mun (1992) The development of group self build housing in Victoria. PhD thesis, University of Melbourne, Australia.

Tang, J C S; Karasudhi, P and Tachopiyagoon, P (1990) Thai construction industry: Demand and projection. Construction Management and Economics, 8(3), pp. 249-257. ISSN 01446193

Tangtinthai, N (2016) Extraction, use and disposal of construction materials in Great Britain and Thailand. PhD thesis, University of Newcastle upon Tyne, UK.

Tatum, C B (2005) Building better: Technical support for construction. Journal of Construction Engineering and Management, 131(1), pp. 23-32. ISSN 0733-9364

Tatum, C B (2018) Construction engineering research: Integration and innovation. Journal of Construction Engineering and Management, 144(3): 04018005, ISSN 0733-9364

Tavares, V M M (2022) Life cycle assessment of prefabricated buildings towards a building stock approach. PhD thesis, Universidade de Coimbra, Portugal.

Taylor, T R B; Uddin, M; Goodrum, P M; McCoy, A and Shan, Y (2012) Change orders and lessons learned: Knowledge from statistical analyses of engineering change orders on Kentucky highway projects. Journal of Construction Engineering and Management, 138(12), pp. 1360-1369. ISSN 0733-9364

Terzioglu, T and Polat, G (2026) Evaluating interactions between formwork system selection criteria for building construction projects: A rough DEMATEL approach. Journal of Construction Engineering and Management, 152(1): 04025225, ISSN 0733-9364

Thomas, Douglas N (2015) The increase of timber use in residential construction in Australia: Towards a sustainable residential development model. PhD thesis, University of Technology Sydney, Australia.

Thomas, R H (2013) An innovative timber construction system: building affordable housing using homegrown Welsh softwood. PhD thesis, Cardiff University, UK.

Thorpe, T (1992) Information flow in house building organisations. PhD thesis, Loughborough University, UK.

Thurairajah, N; Rathnasinghe, A; Brough, J and Jayathilaka, G (2022) The toxic triangle of small and medium-sized enterprise housebuilding: A review of the UK housing industry's dilemma. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Tobolski, M J (2010) Improving the design and performance of concrete bridges in seismic regions. PhD thesis, University of California, San Diego, USA.

Tomar, A and Bansal, V K (2022) Generation, visualization, and evaluation schedule of repetitive construction projects using GIS. International Journal of Construction Management, 22(6), pp. 1104-1119. ISSN 1562-3599

Toole, T M (1998) Uncertainty and home builders' adoption of technological innovations. Journal of Construction Engineering and Management, 124(4), pp. 323-332. ISSN 0733-9364

Tran, D Q and Molenaar, K R (2014) Exploring critical delivery selection risk factors for transportation design and construction projects. Engineering, Construction and Architectural Management, 21(6), pp. 631-647. ISSN 0969-9988

Trigunarsyah, B (2004) A review of current practice in constructability improvement: Case studies on construction projects in Indonesia. Construction Management and Economics, 22(6), pp. 567-580. ISSN 01446193

Trigunarsyah, B (2004) Project owners' role in improving constructability of construction projects: An example analysis for Indonesia. Construction Management and Economics, 22(8), pp. 861-876. ISSN 01446193

Trigunarsyah, B (2004) Constructability practices among construction contractors in Indonesia. Journal of Construction Engineering and Management, 130(5), pp. 656-669. ISSN 0733-9364

Trigunarsyah, B (2007) Project designers' role in improving constructability of Indonesian construction projects. Construction Management and Economics, 25(2), pp. 207-215. ISSN 1466433X

Trigunarsyah, Bambang (2001) Implementing constructability improvement into the Indonesian construction industry. PhD thesis, University of Melbourne, Australia.

Tsao, C C Y; Tommelein, I D; Swanlund, E S and Howell, G A (2004) Work structuring to achieve integrated product-process design. Journal of Construction Engineering and Management, 130(6), pp. 780-789. ISSN 0733-9364

Tse, R Y C; Ho, C W and Ganesan, S (1999) Matching housing supply and demand: An empirical study of Hong Kong's market. Construction Management and Economics, 17(5), pp. 625-633. ISSN 01446193

Tse, R Y C and Webb, J R (2006) An economic analysis of housing construction evidence from Hong Kong. Journal of Construction Research, 7(1), pp. 1-12. ISSN 1609-9451

Tsenkova, S (1998) Private housebuilding and housing markets in transitional economies: The case of Bulgaria. PhD thesis, University of Toronto, Canada.

Tuholski, S J; Gursel, A P; Tommelein, I D and Bomba, G (2009) Lean comparison using process charts of complex seismic retrofit projects. Journal of Construction Engineering and Management, 135(4), pp. 330-339. ISSN 0733-9364

Turner, J P (1992) Constructability for drilled shafts. Journal of Construction Engineering and Management, 118(1), pp. 77-93. ISSN 0733-9364

Underwood, J (1995) Integrating design and construction to improve constructability through an effective usage of IT. PhD thesis, University of Salford, UK.

Usher, D (1990) Privatisation, partnerships and the building industry. PhD thesis, University of Bristol, UK.

Vaglica, J (2018) Investigation of factors contributing to building code violations in residential construction. PhD thesis, Wayne State University, USA.

Vahanvati, M; McEvoy, D and Iyer-Raniga, U (2023) Inclusive and resilient shelter guide: Accounting for the needs of informal settlements in Solomon Islands. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 577-590. ISSN 1759-5916

Van Den Berg, M; Voordijk, H; Adriaanse, A and Hartmann, T (2017) Experiencing supply chain optimizations: A serious gaming approach. Journal of Construction Engineering and Management, 143(11): 04017082, ISSN 0733-9364

Van Egmond-De Wilde De Ligny, E L C and Mohammadi, M (2011) Innovations in domotics: Fulfilling potential or hampered by prevailing technological regime? Construction Innovation, 11(4), pp. 470-492. ISSN 1471-4175

Viking, A and Lidelöw, S (2015) Exploring industrialized housebuilders' interpretations of local requirements using institutional logics. Construction Management and Economics, 33(5-6), pp. 484-494. ISSN 01446193

Viking, A and Stehn, L (2015) Exploring Swedish local planning authorities'perceptions of standardized housing construction. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Vitorio Junior, P C and Kripka, M (2021) Fair wage potential as a tool for social assessment in building projects. Engineering, Construction and Architectural Management, 28(4), pp. 1295-1318. ISSN 0969-9988

Vitry, C; Sage, D and Dainty, A (2016) “Take care of this house”: Affects matter in construction innovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Walker, D H T (1997) Construction time performance and traditional versus non-traditional procurement methods. Journal of Construction Procurement, 3(1), pp. 42-55. ISSN 1358-9180

Walker, D H T and Vines, M W (1997) Construction time performance in multi-unit residential construction: Insight into the role of procurement methods. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Walker, D H T and Vines, M W (2000) Australian multi-unit residential project construction time performance factors. Engineering, Construction and Architectural Management, 7(3), pp. 278-284. ISSN 0969-9988

Wang, L (2018) The fuzzy in evaluation of concrete structure engineering. Journal of Engineering, Design and Technology, 16(2), pp. 327-338. ISSN 1726-0531

Warren-Myers, G and McRae, E (2017) Volume home building: The provision of sustainability information for new homebuyers. Construction Economics and Building, 17(2), pp. 24-40. ISSN 2204-9029

Warsame, A (2011) Performance of construction projects: Essays on supplier structure, construction costs and quality improvement. PhD thesis, KTH Royal Institute of Technology, Sweden.

Watson, L T (2007) Leadership traits in large-volume residential construction. PhD thesis, Capella University, USA.

Wei, Y; Choi, H and Lei, Z (2022) A generative design approach for modular construction in congested urban areas. Smart and Sustainable Built Environment, 11(4), pp. 1163-1181. ISSN 2046-6099

Wellings, F (2005) The rise of the national housebuilder: A history of British housebuilders through the twentieth century. PhD thesis, University of Liverpool, UK.

Whyte, J and Bouchlaghem, D (2002) Implementation of VR systems: A comparison between the early adoption of CAD and current uptake of VR. Construction Innovation, 2(1), pp. 3-13. ISSN 1471-4175

Wilkinson, S J and Reed, R (2011) Examining and quantifying the drivers behind alterations and extensions to commercial buildings in a central business district. Construction Management and Economics, 29(7), pp. 725-735. ISSN 1466433X

Willis, M A (1979) The effects of cyclical demand on industry structure and on the rate of technological change: An international comparison of the housebuilding sectors in the United States, Great Britain and France. PhD thesis, Yale University, USA.

Wilson, G and Kishk, M (2011) Meeting sustainability requirements in the refurbishment of hospitals. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Wilson, G and Kishk, M (2012) Key criteria of sustainable hospital refurbishment: A stakeholder review. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Wong Chong, Oscar (2022) IFC-based system and methods to support analysis of robot-assisted offsite construction. PhD thesis, Purdue University, USA.

Wu, C.; Luo, J.; Hong, Y.; Tan, Y. and Lan, W. (2026) A DfMA-incorporating parametric design approach for enhancing constructability in BIM-enabled architectural design in off-site construction. Journal of Construction Engineering and Management, 152(10): 05026006, ISSN 0733-9364

Xiao, L; Mokhtar, N A and Sulaiman, M K A M (2025) Enhancing profitability and cost efficiency in China's construction industry. Construction Economics and Building, 25(3-4), pp. 1-21. ISSN 2204-9029

Yashiro, T (2014) Conceptual framework of the evolution and transformation of the idea of the industrialization of building in Japan. Construction Management and Economics, 32(1-2), pp. 16-39. ISSN 01446193

Yates, J K and Battersby, L C (2003) Master builder project delivery system and designer construction knowledge. Journal of Construction Engineering and Management, 129(6), pp. 635-644. ISSN 0733-9364

Yoon, J; Yu, I and Jung, D (2018) Factors needed for the development of a constructability assessment model for building renovation and extension in Korea. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Yu, H; Tweed, T; Al-Hussein, M and Nasseri, R (2009) Development of lean model for house construction using value stream mapping. Journal of Construction Engineering and Management, 135(8), pp. 782-790. ISSN 0733-9364

Yu, W-d (1996) A neuro-fuzzy knowledge-based multi-criterion decision model for constructability analysis and improvement of construction technologies. PhD thesis, Purdue University, USA.

Zainab S, P W and Goodhew S, F A (2013) Stakeholders perspective on sustainable technology selection to achieve zero carbon retail buildings. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Zaneldin, E (2000) An information model for improving design coordination in building projects. PhD thesis, University of Waterloo, Canada.

Zhai, X; Reed, R and Mills, A (2014) Addressing sustainable challenges in China: The contribution of off-site industrialisation. Smart and Sustainable Built Environment, 3(3), pp. 261-274. ISSN 2046-6099

Zhai, X; Reed, R and Mills, A (2014) Factors impeding the offsite production of housing construction in China: An investigation of current practice. Construction Management and Economics, 32(1-2), pp. 40-52. ISSN 01446193

Zhai, X; Reed, R and Mills, A (2014) Embracing off-site innovation in construction in China to enhance a sustainable built environment in urban housing. International Journal of Construction Management, 14(3), pp. 123-133. ISSN 1562-3599

Zhang, G and Yang, J (2006) Factors influencing the implementation of the raised floor system in Australian office buildings. Construction Management and Economics, 24(5), pp. 529-543. ISSN 1466433X

Zhang, Guomin (2005) Factors influencing the implementation of raised floor system for the fitout of office buildings in the Australian context. PhD thesis, Queensland University of Technology, Australia.

Zhang, J; Eastham, D L and Bernold, L E (2005) Waste-based management in residential construction. Journal of Construction Engineering and Management, 131(4), pp. 423-430. ISSN 0733-9364

Zhang, J and El-Diraby, T E (2006) Constructability analysis of the bridge superstructure rotation construction method in China. Journal of Construction Engineering and Management, 132(4), pp. 353-362. ISSN 0733-9364

Zhang, S (2022) The development of a low carbon prefabricated house. PhD thesis, University of Nottingham, UK.

Zhong, Y (2013) Decision support system for the selection of structural frame material to achieve sustainability and constructability. PhD thesis, National University of Singapore, Singapore.

Zhong, Y; Ling, F Y Y and Wu, P (2017) Using multiple attribute value technique for the selection of structural frame material to achieve sustainability and constructability. Journal of Construction Engineering and Management, 143(2): 04016098, ISSN 0733-9364

Zolfagharian, S and Irizarry, J (2017) Constructability assessment model for commercial building designs in the United States. Journal of Construction Engineering and Management, 143(8): 04017031, ISSN 0733-9364

Zolfagharian, S; Irizarry, J; Ressang, A; Nourbakhsh, M and Gheisari, M (2014) Automated safety planning approach for residential construction sites in Malaysia. International Journal of Construction Management, 14(3), pp. 134-147. ISSN 1562-3599

Zolghadr, Ali (2023) Innovative offsite construction uptake in the housebuilding sector: A systemic approach to economic justifiability for volume builders. PhD thesis, RMIT University, Australia.

jadidoleslami, S; Saghatforoush, E and Zare Ravasan, A (2021) Constructability obstacles: An exploratory factor analysis approach. International Journal of Construction Management, 21(3), pp. 312-325. ISSN 1562-3599

van der Meer, J; Hartmann, A; van der Horst, A and Dewulf, G (2022) Raising risk awareness in multi-criteria design decisions for integrated design and construction tenders. Construction Management and Economics, 40(4), pp. 296-312. ISSN 01446193

Álvares, J S; Costa, D B and Melo, R R S (2018) Exploratory study of using unmanned aerial system imagery for construction site 3D mapping. Construction Innovation, 18(3), pp. 301-320. ISSN 1471-4175

Çetin, Sultan (2023) Towards a circular building industry through digitalisation: Exploring how digital technologies can help narrow, slow, close, and regenerate the loops in social housing practice. PhD thesis, Delft University of Technology, Netherlands.