Items with Subject: architectural elements

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abbas, G. M.; Meral Akgül, Ç and Dino, I. G. (2025) Resilient cooling of the Mediterranean office spaces under climate change. Architectural Engineering and Design Management, 21(6), pp. 1165-1186. ISSN 1745-2007

Abbas, G M and Gursel Dino, I (2022) The impact of natural ventilation on airborne biocontaminants: A study on COVID-19 dispersion in an open office. Engineering, Construction and Architectural Management, 29(4), pp. 1609-1641. ISSN 0969-9988

Abbasnejad, B; Soltani, S and Wong, P (2024) A systematic review of online learning and teaching strategies during the COVID-19 pandemic: Implications for the construction management sector. Smart and Sustainable Built Environment, 13(4), pp. 934-959. ISSN 2046-6099

Abd-Elnaby, A-E H A and Reffat, R M (2024) Enhancing BIM-BEM integration: Solutions for efficient data exchange and energy performance assessment. Architectural Engineering and Design Management, 20(3), pp. 596-623. ISSN 1745-2007

Abdel-Fattah, A (2013) Dynamic site layout planning model. PhD thesis, University of Calgary, Canada.

Abdelmageed, S; Abdelkhalek, S I F M; Hussien, M and Zayed, T (2024) A hybrid simulation model for modules installation in modular integrated construction projects. International Journal of Construction Management, 24(13), pp. 1407-1418. ISSN 1562-3599

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Abdul Mujeebu, M and Ashraf, N (2020) Impact of location and deadband on energy performance of nano aerogel glazing for office building in Saudi Arabia. Building Research & Information, 48(6), pp. 645-658. ISSN 0961-3218

Abdul Rahman, A R B (2018) Teaching non-technological skills for successful building information modeling (BIM) projects. PhD thesis, Arizona State University, USA.

Abdulai, S F; Zayed, T; Taiwo, R and Ali, A H (2025) Hybrid statistical analysis of critical alignment factors in modular integrated construction. Journal of Construction Engineering and Management, 151(9): 04025129, ISSN 0733-9364

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Abdullah, W M W (2010) Critical factors in project success: A study of public sector construction projects in Malaysia. PhD thesis, University of Malaya, Malaysia.

Abeid, J and Arditi, D (2002) Time-lapse digital photography applied to project management. Journal of Construction Engineering and Management, 128(6), pp. 530-535. ISSN 0733-9364

Abeid, J and Arditi, D (2003) Photo-net: An integrated system for controlling construction progress. Engineering, Construction and Architectural Management, 10(3), pp. 162-171. ISSN 0969-9988

Abeid, J N (2000) Photo-net: An integrated system for controlling the progress of construction activities. PhD thesis, Illinois Institute of Technology, USA.

Abeysekera, W V K M (1997) A strategy for managing brickwork in Sri Lanka. PhD thesis, Loughborough University, UK.

Abeysekera, W V K M and Thorpe, A (1997) Standardisation or non-standardisation? The case of brickwork in Sri Lanka. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Abruzzini, A and Abrishami, S (2022) Integration of BIM and advanced digital technologies to the end of life decision-making process: A paradigm of future opportunities. Journal of Engineering, Design and Technology, 20(2), pp. 388-413. ISSN 1726-0531

Abu Aisheh, Y (2011) Climate change and the built environment: an evaluation of sustainable refurbishment options for higher education buildings in the UK. PhD thesis, University of Birmingham, UK.

Abu Hammad, A A (2003) A decision support system for manufactured housing production process planning and facility layout. PhD thesis, University of Cincinnati, USA.

Abu Hanipah, A F F and Tahar, K N (2018) Development of the 3D dome model based on a terrestrial laser scanner. International Journal of Building Pathology and Adaptation, 36(2), pp. 122-136. ISSN 23984708

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Ackerly, K and Brager, G (2013) Window signalling systems: Control strategies and occupant behaviour. Building Research & Information, 41(3), pp. 342-360. ISSN 0961-3218

Ackerman Jr., P J (2014) Condition assessment, indices, and risk-based decision-making for public school infrastructure management. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Adam, A; Gluch, P and Julin, J (2014) Using actor-network theory to understand knowledge sharing in an architecture firm. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Adel, R; Megahed, N; Hassan, A M and Shahda, M (2025) Evolution of the courtyard to the skycourt: A bibliometric analysis of research trends. International Journal of Building Pathology and Adaptation, 43(2), pp. 257-280. ISSN 2398-4708

Adel Ahmadian, A (2020) Computational design for cooperative robotic assembly of nonstandard timber frame buildings. DSc thesis, ETH Zürich, Switzerland.

Adi Maimun, N H (2016) Price and rent effects of energy efficiency in residential properties: evidence from the Belfast Metropolitan area. PhD thesis, Ulster University, UK.

Adjei-Kumi, T (1997) The development of an intelligent system for visual simulation of construction projects. PhD thesis, University of Strathclyde, UK.

Adnan, N. A.; Ramali, F. N.; Yahya, N.; Amin, N. D. M.; Sabil, A.; Mohd Siraj, S. and Ismail, N. (2025) Preservation strategies for historic timber mosques: Structural integrity assessment on masjid jamek an nur, Batu Pahat, Johor. Journal of Construction in Developing Countries, 30(2), pp. 343-361. ISSN 1823-6499

Agha, R H M (2016) The role of intelligent systems in traditional courtyard houses in Baghdad, Iraq. PhD thesis, University of Newcastle upon Tyne, UK.

Agyefi-Mensah, S; Post, J; van Egmond, E E L C; Badu, E and Mohammadi, M (2015) A typological analysis of public apartment buildings in Ghana. Architectural Engineering and Design Management, 11(5), pp. 376-389. ISSN 1745-2007

Agyekum, K; Ghansah, F A; Tetteh, P A and Amudjie, J (2021) The role of project managers (pms) in construction health and safety implementation in Ghana. Journal of Engineering, Design and Technology, 19(1), pp. 245-262. ISSN 1726-0531

Ahadzie, D K; Opoku, R; Opoku Ware, S N and Mensah, H (2021) Analysis of occupant behaviour in the use of air-conditioners in public buildings in developing countries: Evidence from Ghana. International Journal of Building Pathology and Adaptation, 39(2), pp. 259-282. ISSN 23984708

Ahluwalia, S S (2009) A framework for efficient condition assessment of the building infrastructure. PhD thesis, University of Waterloo, Canada.

Ahmadian Fard Fini, A; Maghrebi, M; Forsythe, P J and Waller, T S (2022) Using existing site surveillance cameras to automatically measure the installation speed in prefabricated timber construction. Engineering, Construction and Architectural Management, 29(2), pp. 573-600. ISSN 0969-9988

Ahmadu, H A; Ibrahim, Y M; Ibrahim, A D and Abdullahi, M (2015) Modelling building construction durations. Journal of Financial Management of Property and Construction, 20(1), pp. 65-84. ISSN 1366-4387

Ahmed Gouda, M and Marzouk, M (2024) A BIM-based semantic approach for fund-allocation of building components. Architectural Engineering and Design Management, 20(3), pp. 471-493. ISSN 1745-2007

Ahmed Memon, Z; Zaimi, M A M and Mustaffar, M (2007) A systematic procedure for developing the 3D model to evaluate the construction project progress. Construction Innovation, 7(2), pp. 187-199. ISSN 1471-4175

Ahn, S; Crouch, L; Wan Kim, T and Rameezdeen, R (2020) Comparison of worker safety risks between onsite and offsite construction methods: A site management perspective. Journal of Construction Engineering and Management, 146(9): 0001890, ISSN 0733-9364

Ainge, Judith Alison (2016) Walls of iron: Nineteenth century prefabricated iron buildings in Australia. PhD thesis, University of Sydney, Australia.

Ajayi, O O; Koleoso, H; Ajayi, M and Faremi, O (2019) Maintenance performance of prison facilities in Southwestern Nigeria. Journal of Construction Business and Management, 3(2), pp. 26-34. ISSN 2521-0165

Ajayi, S; Brinklow-Harris, J; Alaka, H A and Dauda, J A (2019) Managing the benefits and impediments to offsite construction in the UK construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Aka, A; Isah, A D; Eze, C J and Timileyin, O (2020) Application of lean manufacturing tools and techniques for waste reduction in Nigerian bricks production process. Engineering, Construction and Architectural Management, 27(3), pp. 658-679. ISSN 0969-9988

Akar, G (2009) Analysis of activity choice: The role of activity attributes and individual schedules. PhD thesis, University of Maryland, College Park, USA.

Akhimien, N (2022) A framework for incorporating circular economy in the design of energy efficient residential buildings in Nigeria. PhD thesis, Cardiff University, UK.

Akindele, O; Ajayi, S; Oyegoke, A S; Alaka, H A and Omotayo, T (2025) Application of geographic information system (GIS) in construction: A systematic review. Smart and Sustainable Built Environment, 14(1), pp. 210-236. ISSN 2046-6099

Aksoy Tırmıkçı, C and Yavuz, C (2019) Environmental life cycle analysis of a fixed PV energy system and a two-axis sun tracking PV energy system in a low-energy house in Turkey. Smart and Sustainable Built Environment, 8(5), pp. 391-399. ISSN 2046-6099

Aksözen, M; Hassler, U; Rivallain, M and Kohler, N (2017) Mortality analysis of an urban building stock. Building Research & Information, 45(3), pp. 259-277. ISSN 0961-3218

Al Qasimi, S K H (2019) The impact of implementing heritage elements in contemporary buildings in the United Arab Emirates. PhD thesis, University of Wolverhampton, UK.

Al-Bayati, A J (2017) Managing workforce diversity in construction to improve communication and reduce fatalities (Hispanic workforce focus). PhD thesis, Western Michigan University, USA.

Al-Bayati, A J (2019) Satisfying the need for diversity training for Hispanic construction workers and their supervisors at US construction workplaces: A case study. Journal of Construction Engineering and Management, 145(6): 05019007, ISSN 0733-9364

Al-Bazi, A and Dawood, N (2018) Simulation-based optimisation using simulated annealing for crew allocation in the precast industry. Architectural Engineering and Design Management, 14(1-2), pp. 109-126. ISSN 1745-2007

Al-Ghzawi, M and El-Rayes, K (2023) Optimizing the planning of airport airside expansion projects to minimize air traffic disruptions and construction cost. Journal of Construction Engineering and Management, 149(4): 04023013, ISSN 0733-9364

Al-Hafith, O; Bk, S and de Wilde, P (2023) Assessing annual thermal comfort extent in central courtyards: Baghdad as a case study. Smart and Sustainable Built Environment, 12(3), pp. 660-681. ISSN 2046-6099

Al-Hussein, M (1999) An integrated information system for crane selection and utilisation. PhD thesis, Concordia University, Canada.

Al-Hussein, M; Alkass, S and Moselhi, O (2001) An algorithm for mobile crane selection and location on construction sites. Construction Innovation, 1(2), pp. 91-105. ISSN 1471-4175

Al-Hussein, M; Alkass, S and Moselhi, O (2005) Optimization algorithm for selection and on site location of mobile cranes. Journal of Construction Engineering and Management, 131(5), pp. 579-590. ISSN 0733-9364

Al-Khatri, H; Etri, T and Gadi, M B (2022) User response to indoor thermal environment in female high school buildings in Oman. Building Research & Information, 50(1-2), pp. 192-212. ISSN 0961-3218

Al-Muqdadi, F (2020) Assessing the potentials of heritage building information modelling (HBIM) in damaged heritage reconstruction. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Al-Musallam, A A (2002) A web-based approach for coordinating architectural drawings with other construction documents. PhD thesis, Illinois Institute of Technology, USA.

Al-Otaibi, S (2021) Assessing the impact of transport investment and railway accessibility on economic productivity. PhD thesis, Loughborough University, UK.

Al-Sharif, F F A (2007) Financial model for private finance initiative projects applied to school buildings. PhD thesis, Heriot-Watt University, UK.

Al-Smadi, H; Al-Sakkaf, A; Zayed, T and Nasiri, F (2023) An integrated space-based building maintenance management model using multi-objective optimization. Smart and Sustainable Built Environment, 12(2), pp. 277-297. ISSN 2046-6099

Al-Tabbaa, O and Rustom, R (2011) General framework for designing multi-use simulation modules for estimating project durations. Construction Innovation, 11(3), pp. 321-337. ISSN 1471-4175

AlBughdadi, A J M (2022) Advanced decision support tools for bridge asset management. PhD thesis, Iowa State University, USA.

Alashari, M; El-Rayes, K and Alotaibi, M (2023) Optimizing the planning of maintenance activities in education buildings. Journal of Construction Engineering and Management, 149(10): 04023094, ISSN 0733-9364

Alaux, N; Kulmer, V; Vogel, J and Passer, A (2025) Preserving buildings: Emission reductions from circular economy strategies in Austria. Buildings & Cities, 6(1), pp. 881-898. ISSN 2632-6655

Alavi, P; Sobouti, H and Shahbazi, M (2024) Adaptive re-use of industrial heritage and its role in achieving local sustainability. International Journal of Building Pathology and Adaptation, 42(6), pp. 1223-1249. ISSN 2398-4708

Albayyaa, H; Hagare, D and Saha, S (2021) Energy conservation assessment of traditional and modern houses in sydney. Building Research & Information, 49(6), pp. 613-623. ISSN 0961-3218

Alcantara Jr., P T (1996) Development of a computer-understandable representation of design rationale to support value engineering. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Alex, D P; Al Hussein, M; Bouferguene, A and Fernando, S (2010) Artificial neural network model for cost estimation: City of Edmonton's water and sewer installation services. Journal of Construction Engineering and Management, 136(7), pp. 745-756. ISSN 0733-9364

Alfian, N N; Kanu, R and Mohammed, M A (2025) Speech intelligibility evaluation of small-scale mosque with multiple domes design. International Journal of Building Pathology and Adaptation, 43(7), pp. 1741-1761. ISSN 2398-4708

Alharbi, E A and Alsehaimi, A (2025) Machine learning model to predict the cooling load of mosque buildings during the design stage. International Journal of Construction Management, 25(8), pp. 965-979. ISSN 1562-3599

Alhusban, A A and Almshaqbeh, S N (2024) Delivering an inclusive built environment for physically disabled people in public universities (Jordan as a case study). Journal of Engineering, Design and Technology, 22(6), pp. 1980-1998. ISSN 1726-0531

Ali, A H; Elyamany, A; Ibrahim, A H; Kineber, A F and Daoud, A O (2024) Modelling the relationship between modular construction adoption and critical success factors for residential projects in developing countries. International Journal of Construction Management, 24(12), pp. 1314-1325. ISSN 1562-3599

Ali, A H; Kineber, A F; Elyamany, A; Ibrahim, A H and Daoud, A O (2025) Application of Ginni's mean analysis for identifying the stationary driver enhancing modular construction adoption in the building industry. International Journal of Construction Management, 25(3), pp. 322-333. ISSN 1562-3599

Ali, G M; Olearczyk, J; Bouferguene, A and Al-Hussein, M (2021) Implementation of combined loading to calculate ground bearing pressure under crawler crane tracks. Journal of Construction Engineering and Management, 147(7): 04021051, ISSN 0733-9364

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Ali, N (2018) A framework for designing energy efficient dwellings satisfying socio-cultural needs in hot climates. PhD thesis, De Montfort University, UK.

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Alkass, S; Mazerolle, M and Harris, F (1996) Construction delay analysis techniques. Construction Management and Economics, 14(5), pp. 375-394. ISSN 01446193

Almashaqbeh, M and El-Rayes, K (2022) Minimizing transportation cost of prefabricated modules in modular construction projects. Engineering, Construction and Architectural Management, 29(10), pp. 3847-3867. ISSN 0969-9988

Almeida, L; Tam, V W Y; Le, K N and She, Y (2020) Effects of occupant behaviour on energy performance in buildings: A green and non-green building comparison. Engineering, Construction and Architectural Management, 27(8), pp. 1939-1962. ISSN 0969-9988

Almeida, Laura (2019) Energy-related occupant behaviour in green and non-rated buildings. PhD thesis, Western Sydney University, Australia.

Almhafdy, A and Alsehail, A M (2025) The effect of window design factors on the cooling load in hospitals wards. Smart and Sustainable Built Environment, 14(5), pp. 1389-1406. ISSN 2046-6099

Almutiri, Y R (2016) Empirical investigation into development of a curricular framework to embed building information modelling with undergraduate architectural programmes within Saudi Arabia. PhD thesis, University of Salford, UK.

Alnaser, N W (2010) Utilisation of solar and wind energy in buildings in the Kingdom of Bahrain: a step towards sustainable building construction. PhD thesis, University of Reading, UK.

Alotaibi, M; El-Rayes, K and Altuwaim, A (2021) Optimizing the renovation scheduling of leased residential buildings to minimize total project cost. Journal of Construction Engineering and Management, 147(7): 2063, ISSN 0733-9364

Alshibani, A (2008) Optimizing and controlling earthmoving operations using spatial technologies. PhD thesis, Concordia University, Canada.

Alsugair, A M (1992) An intelligent resource allocation system. PhD thesis, Texas A&M University, USA.

Alsyouf, L; Al Harbat, R; Ma'bdeh, S N and Mushtaha, E S N (2026) Economic feasibility of low-impact retrofit strategies for enhancing energy efficiency in residential townhouses: A case study of sharjah. Construction Economics and Building, 26(1), ISSN 2204-9029

Altuwaim, A and El-Rayes, K (2018) Optimizing the scheduling of repetitive construction to minimize interruption cost. Journal of Construction Engineering and Management, 144(7): 4018051, ISSN 0733-9364

An, X; Zheng, F; Wang, Z; Li, Z; Jiao, Y and An, H (2025) Dynamic risk assessment approach for deep foundation pit construction based on the integration of multisource data using D-S evidence theory. Journal of Construction Engineering and Management, 151(10): 04025155, ISSN 0733-9364

Ancell, D (2013) Construction studies in higher education and the use of digital technology. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Andersen, C E; Kanafani, K; Zimmermann, R K; Rasmussen, F N and Birgisdóttir, H (2020) Comparison of GHG emissions from circular and conventional building components. Buildings & Cities, 1(1), pp. 379-392. ISSN 2632-6655

Andersen, M (2002) Light distribution through advanced fenestration systems. Building Research & Information, 30(4), pp. 264-281. ISSN 0961-3218

Antonini, E; Boeri, A and Giglio, F (2022) Classification criteria and markers for biomimetic building envelope within circular economy principles: A critical review. Architectural Engineering and Design Management, 18(4), pp. 387-409. ISSN 1745-2007

Antwi, A and Deakin, M (1996) Discounting, obsolescence, depreciation and their effects on the environment of cities. Journal of Financial Management of Property and Construction, 1(2), pp. 39-56. ISSN 1366-4387

Antwi-Afari, M F; Li, H; Umer, W; Yu, Y and Xing, X (2020) Construction activity recognition and ergonomic risk assessment using a wearable insole pressure system. Journal of Construction Engineering and Management, 146(7): 04020077, ISSN 0733-9364

Anugwo, Iruka Chijindu; Appau, Williams Miller; Attakora-Amaniampong, Elvis and Simpeh, Frederick (2026) Smart, but not spontaneous? Exploring the satisfaction gap and drivers in smart lighting in student housing in Ghana. Journal of Construction Business and Management, 8(S1), pp. 88-98. ISSN 2521-0165

Apollo, M and Burkacki, D (2024) Key success factors for small design offices in the bidding process. Architectural Engineering and Design Management, 20(1), pp. 32-46. ISSN 1745-2007

Arabpour Roghabadi, M and Moselhi, O (2021) Optimized crew selection for scheduling of repetitive projects. Engineering, Construction and Architectural Management, 28(6), pp. 1517-1540. ISSN 0969-9988

Arana, M M and Wittek, R P M (2016) Community resilience: Sustained cooperation and space usage in collective housing. Building Research & Information, 44(7), pp. 764-774. ISSN 0961-3218

Arayamparambil, S. R.; Jha, K. N. and Singh, A. (2026) Development of a quality assessment scoring framework for residential buildings. International Journal of Building Pathology and Adaptation, 44(4), pp. 833-848. ISSN 2398-4708

Arditi, D; Sikangwan, P and Tokdemir, O B (2002) Scheduling system for high rise building construction. Construction Management and Economics, 20(4), pp. 353-364. ISSN 01446193

Arias-Jiménez, N.; Trebilcock-Kelly, M.; Figueroa-SanMartín, R. and González-Cáceres, A. (2026) Experimental evaluation of the impact of roofing materials and natural ventilation on attic overheating in a temperate Chilean climate. Building Research & Information, 54(5), pp. 573-587. ISSN 0961-3218

Arida, M A (2024) Enhancing thermal comfort in commercial buildings: Contributions of machine learning algorithms for optimizing predictive thermal comfort indices. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Arshad, M F; Thaheem, M J; Nasir, A R and Malik, M S A (2019) Contractual risks of building information modeling: Toward a standardized legal framework for design-bid-build projects. Journal of Construction Engineering and Management, 145(4): 04019010, ISSN 0733-9364

Ascione, F; Bellia, L; Mazzei, P and Minichiello, F (2010) Solar gain and building envelope: The surface factor. Building Research & Information, 38(2), pp. 187-205. ISSN 0961-3218

Ashcroft, D; Egbelakin, T; Jing, J and Rasheed, E O (2019) Cost comparison of seismic damage resisting systems for modules in multi-storey buildings. Journal of Engineering, Design and Technology, 17(2), pp. 330-346. ISSN 1726-0531

Asif, M (2019) An empirical study on life cycle assessment of double-glazed aluminium-clad timber windows. International Journal of Building Pathology and Adaptation, 37(5), pp. 547-564. ISSN 23984708

Asmone, A S (2020) Development of a bayesian based design-for-maintinability decision support framework. PhD thesis, National University of Singapore, Singapore.

Assad, M; Hosny, O; Elhakeem, A and El Haggar, S (2015) Green building design in Egypt from cost and energy perspectives. Architectural Engineering and Design Management, 11(1), pp. 21-40. ISSN 1745-2007

Attarzadeh, M; Chua, D K H; Beer, M and Abbott, E L S (2017) Options-based negotiation management of PPP-BOT infrastructure projects. Construction Management and Economics, 35(11-12), pp. 676-692. ISSN 0144-6193

Atwal, P; Morton, P and Watts, N (2007) Mentoring in built environment higher education courses. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Au-Yong, C P; Ali, A S and Pavaraj, A (2023) Prioritising the maintenance of university hostels to improve students' satisfaction. Journal of Construction in Developing Countries, 28(1), pp. 151-169. ISSN 1823-6499

Augugliaro, F (2015) Physical interaction, aerial construction, and coordinated flight for flying machines. DSc thesis, ETH Zürich, Switzerland.

Ayda Montaser, K and Heidari, S (2021) Optimizing window size by integrating energy and lighting analyses considering occupants' visual satisfaction. Built Environment Project and Asset Management, 11(4), pp. 673-686. ISSN 2044-124X

Ayoubi, M. and Arashpour, M. (2026) Early recognition of workplace hazards using data-efficient multimodal learnable prompting and parameter-efficient fine tuning. Journal of Construction Engineering and Management, 152(10): 04026165, ISSN 0733-9364

Ayoubi, M. and Arashpour, M. (2026) Early recognition of workplace hazards using data-efficient multimodal learnable prompting and parameter-efficient fine tuning. Journal of Construction Engineering and Management, 152(10): 04026165, ISSN 0733-9364

Azcarate Aguerre, J F (2023) Facades-as-a-service: A cross-disciplinary model for the (re)development of circular building envelopes. PhD thesis, Delft University of Technology, Netherlands.

Azimzadeh, F (2000) COSTEFF model: A computer-based knowledge source for improving cost effectiveness of engineering and construction projects. DEng thesis, Lamar University - Beaumont, USA.

Baah, B.; Ayarkwa, J.; Osei-Asibey, D.; Oduro, S.; Sunindijo, R. Y.; Afful, A. E.; Takyi, J. and Sosu, J. (2026) Developing resilient hazard recognition skills among construction workers: The role of safety-simulation training methods. Built Environment Project and Asset Management, 16(3), pp. 597-615. ISSN 2044-124X

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Baborska-Narozny, M; Bandurski, K and Grudzinska, M (2025) Understanding shading through home-use experience, measurement and modelling. Buildings & Cities, 6(1), pp. 466-489. ISSN 2632-6655

Backus, T A (1961) A study of construction and maintenance costs in relationship to true economy of school operation. EdD thesis, Florida State University, USA.

Baharfar, Y; Mohammadyan, M; Moattar, F; Nassiri, P and Behzadi, M H (2022) Indoor pm2.5 concentrations of pre-schools; determining the effective factors and model for prediction. Smart and Sustainable Built Environment, 11(4), pp. 1042-1059. ISSN 2046-6099

Baharun, A; Imran, M S; Ibrahim, S H and Abidin, W A W Z (2018) Night cooled radiant cooling panel for sustainable building cooling mode in Malaysia. Journal of Construction in Developing Countries, 23(1), pp. 61-79. ISSN 1823-6499

Bakheet, M T (1995) Contractors' risk assessment system. PhD thesis, Georgia Institute of Technology, USA.

Ballard, G (2002) Managing work flow on design projects: A case study. Engineering, Construction and Architectural Management, 9(3), pp. 284-291. ISSN 0969-9988

Barati, M K and Bankaru-Swamy, S (2026) A living lab approach to co-designing climate adaptation strategies. Buildings & Cities, 7(1), pp. 39-57. ISSN 2632-6655

Barbarosoglu, B V (2018) Early detection of maintainability issues in MEP systems using BIM. PhD thesis, Illinois Institute of Technology, USA.

Barbosa, Elisabeti de Fátima Teixeira (2024) Influence of user's behavior on thermoenergetic performance in higher education buildings. PhD thesis, Universidade Estadual de Campinas, Brazil.

Barkokebas, B; Al-Hussein, M and Hamzeh, F (2023) Assessment of digital twins to reassign multiskilled workers in offsite construction based on lean thinking. Journal of Construction Engineering and Management, 149(1): 04022143, ISSN 0733-9364

Bascoul, A M (2017) Managing project structural complexity by integrating facility management in planning, designing, and execution of high-end facility upgrades. PhD thesis, University of California, Berkeley, USA.

Bashirzadeh Tabrizi, Toktam (2019) Towards a simplified LCA tool: Minimising the life cycle environmental impact at the early stages of building design. PhD thesis, University of Sydney, Australia.

Basurto, C; Kämpf, J H and Scartezzini, J-L (2017) Multi-criteria analysis for the integrated performance assessment of complex fenestration systems. Building Research & Information, 45(8), pp. 926-942. ISSN 0961-3218

Batista Silveira Dos Santos, L F (2020) Efficient modeling strategies for performance-based building design supported by daylight and building energy simulations. PhD thesis, University of California, Berkeley, USA.

Bayrak, T (2008) Semi automatic construction progress measurement using a combination of CAD modelling, photogrammetry and construction knowledge. PhD thesis, Heriot-Watt University, UK.

Bayraktar, M E and Hastak, M (2009) Bayesian belief network model for decision making in highway maintenance: Case studies. Journal of Construction Engineering and Management, 135(12), pp. 1357-1369. ISSN 0733-9364

Bebelaar, N; Braggaar, R C; Kleijwegt, C M; Meulmeester, R W E; Michailidou, G; Salheb, N; van der Spek, S; Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(1), pp. 68-79. ISSN 2046-6099

Becerra, J; Ortiz, P; Zaderenko, A P and Karapanagiotis, I (2020) Assessment of nanoparticles/nanocomposites to inhibit micro-algal fouling on limestone façades. Building Research & Information, 48(2), pp. 180-190. ISSN 0961-3218

Beemsterboer, S and Koch, C (2016) Building information standards: Big data technologies prevented from becoming big in building. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Bekdik, B; Pörzgen, J; Bull, S S and Thuesen, C (2018) Modularising design processes of façades in Denmark: Re-exploring the use of design structure matrix. Architectural Engineering and Design Management, 14(1-2), pp. 95-108. ISSN 1745-2007

Bello, N A; Abdullahi, B C; Atilola, M I and Thontteh, E O (2023) Review of the methodological approach of analysing rental income of residential property in Abuja, Nigeria. Journal of Financial Management of Property and Construction, 28(1), pp. 107-126. ISSN 1366-4387

Belusko, M; Timothy, M and Leary, O (2010) Cost analyses of measures to improve residential energy ratings to 6 stars: Playford North development, South Australia. Construction Economics and Building, 10(1-2), pp. 36-47. ISSN 2204-9029

Bender, M J (1996) A framework for collaborative planning and investigations of decision support tools for hydro development. PhD thesis, University of Manitoba, Canada.

Benjaoran, V; Sooksil, N and Metham, M (2019) Effect of demand variations on steel bars cutting loss. International Journal of Construction Management, 19(2), pp. 137-148. ISSN 1562-3599

Bhanu, A C (2024) Integrating artificial intelligence and augmented reality for enhanced task performance in the construction industry. PhD thesis, Clemson University, USA.

Bhih, M and Hegazy, T (2023) Multiple-window modified but-for analysis of project delays and accelerations. International Journal of Construction Management, 23(4), pp. 686-696. ISSN 1562-3599

Biltoria, A K and Roy, U K (2024) Affordable housing using industrialized construction: a market-based standardization of housing units in India. Architectural Engineering and Design Management, 20(5), pp. 1203-1221. ISSN 1745-2007

Binsarra, F A (2016) Uncovering the structure and the dynamic of information propagation in building. PhD thesis, University of Liverpool, UK.

Blanc, F and Scanlon, K (2022) Sharing a home under lockdown in London. Buildings & Cities, 3(1), pp. 118-133. ISSN 2632-6655

Bojic, M; Yik, F and Lee, M (2003) Influence of air-conditioning exhaust on exterior recessed space. Building Research & Information, 31(1), pp. 24-33. ISSN 0961-3218

Bonwetsch, T (2015) Robotically assembled brickwork: Manipulating assembly processes of discrete elements. DSc thesis, ETH Zürich, Switzerland.

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 2: Technical performance of the Probe buildings. Building Research & Information, 29(2), pp. 103-113. ISSN 0961-3218

Borgeson, S and Brager, G (2011) Comfort standards and variations in exceedance for mixed-mode buildings. Building Research & Information, 39(2), pp. 118-133. ISSN 0961-3218

Borrallo-Jiménez, M; Esquivias, P M; Fernández-Agüera, J and LopezDeAsiain, M (2025) Hybrid ventilation in a nearly zero-energy building as a function of users' habits for better indoor air quality and thermal comfort in a warm climate. Building Research & Information, 53(1-2), pp. 77-94. ISSN 0961-3218

Borràs, J G; Mas, Á; Lerma, C; Vercher, J and Gil, E (2024) Separation layers and their influence on green roof water storage. Architectural Engineering and Design Management, 20(6), pp. 1629-1647. ISSN 1745-2007

Bostancioglu, E (2021) Double skin façade assessment by fuzzy AHP and comparison with AHP. Architectural Engineering and Design Management, 17(1-2), pp. 110-130. ISSN 1745-2007

Bostancioglu, E and Onder, N P (2019) Applying analytic hierarchy process to the evaluation of double skin façades. Architectural Engineering and Design Management, 15(1), pp. 66-82. ISSN 1745-2007

Bouchlaghem, N M (1996) A computer model for the design of window shading devices. Building Research & Information, 24(2), pp. 104-107. ISSN 0961-3218

Boulton, R J; Boulton, L L and Boulton, M J (2025) The effects of a short information-giving intervention on householders' beliefs and actions related to window opening as purge ventilation of water vapour: Implications for surveyors. International Journal of Building Pathology and Adaptation, 43(6), pp. 1559-1576. ISSN 2398-4708

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The Batalha Monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The batalha monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Bourgeois, D; Reinhart, C F and Ward, G (2008) Standard daylight coefficient model for dynamic daylighting simulations. Building Research & Information, 36(1), pp. 68-82. ISSN 0961-3218

Bourikas, L; Costanza, E; Gauthier, S; James, P A B; Kittley-Davies, J; Ornaghi, C; Rogers, A; Saadatian, E and Huang, Y (2018) Camera-based window-opening estimation in a naturally ventilated office. Building Research & Information, 46(2), pp. 148-16. ISSN 0961-3218

Boussaa, Y; Dodoo, A; Nguyen, T and Rupar-Gadd, K (2024) Comprehensive renovation of a multi-apartment building in Sweden: Techno-economic analysis with respect to different economic scenarios. Building Research & Information, 52(4), pp. 463-478. ISSN 0961-3218

Brady, L and Hanmer-Dwight, R (2016) The management and control of energy at the design stage of buildings. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Brager, G and Baker, L (2009) Occupant satisfaction in mixed-mode buildings. Building Research & Information, 37(4), pp. 369-380. ISSN 0961-3218

Brodetskaia, I; Sacks, R and Shapira, A (2011) A workflow model for systems and interior finishing works in building construction. Construction Management and Economics, 29(12), pp. 1209-1227. ISSN 1466433X

Brown, J and Loosemore, M (2015) Behavioural factors influencing corrupt action in the Australian construction industry. Engineering, Construction and Architectural Management, 22(4), pp. 372-389. ISSN 0969-9988

Brunet, M; Motamedi, A; Guénette, L M and Forgues, D (2019) Analysis of BIM use for asset management in three public organizations in Québec, Canada. Built Environment Project and Asset Management, 9(1), pp. 153-167. ISSN 2044-124X

Bui, T T P; Wilkinson, S; Domingo, N and MacGregor, C (2021) Towards zero carbon building refurbishment: A new conceptual framework for decision support tools. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Bukhari, Fakhri A (2011) A hierarchical evolutionary algorithmic design (head) system for generating and evolving building design models. PhD thesis, Queensland University of Technology, Australia.

Bulut, M; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2021) Perceived benefits of retrofitted residential secondary glazing: An exploratory Australian study. International Journal of Building Pathology and Adaptation, 39(5), pp. 720-733. ISSN 23984708

Bulut, M B; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2022) Thermal performance of retrofitted secondary glazed windows in residential buildings: two cases from Australia. Smart and Sustainable Built Environment, 11(4), pp. 1182-1192. ISSN 2046-6099

Butchers, A M (2004) Learning off the job: engineers and professional education. PhD thesis, University of Sheffield, UK.

Byrd, H; Matthewman, S and Rasheed, E (2022) Air-conditioning in New Zealand: Power and policy. Buildings & Cities, 3(1), pp. 1-9. ISSN 2632-6655

Bélafi, Z D (2018) Analysis and modelling of occupant behaviour to support building design and performance optimisation. PhD thesis, Budapest University of Technology and Economics, Hungary.

Caetano, L F; de Souza, H A and Gomes, A P (2022) Effect of the exposed steel structure on the thermal performance of buildings. Architectural Engineering and Design Management, 18(1), pp. 38-55. ISSN 1745-2007

Cai, J; Yang, L; Zhang, Y; Li, S and Cai, H (2021) Multitask learning method for detecting the visual focus of attention of construction workers. Journal of Construction Engineering and Management, 147(7): 04021063, ISSN 0733-9364

Cai, K Q (2007) Business process model for process improvement: an investigation of the tendering process in aconstruction company. PhD thesis, University of Hong Kong, Hong Kong.

Camacho-Montano, S C; Cook, M and Wagner, A (2020) Avoiding overheating in existing school buildings through optimized passive measures. Building Research & Information, 48(4), pp. 349-363. ISSN 0961-3218

Camargo Júnior, Alceu Salles (2003) Simultaneous engineering: A comparison between "point-based" and "set-based" approaches. PhD thesis, Universidade de São Paulo, Brazil.

Cammarano, S; Pellegrino, A; Lo Verso, V R M and Aghemo, C (2015) Assessment of daylight in rooms with different architectural features. Building Research & Information, 43(2), pp. 222-237. ISSN 0961-3218

Cao, J; Said, H; Savov, A and Hall, D (2024) Graph-based evolutionary search for optimal hybrid modularization of building construction projects. Journal of Construction Engineering and Management, 150(8): 04024098, ISSN 0733-9364

Capitanio, M (2018) More green space in Japanese shopping streets: Assessing the manifold potential of green roofs in Shimokitazawa, Tokyo. Smart and Sustainable Built Environment, 7(2), pp. 212-222. ISSN 2046-6099

Carlos, J S (2017) The impact of refurbished windows on Portuguese old school buildings. Architectural Engineering and Design Management, 13(3), pp. 185-201. ISSN 1745-2007

Carretero-Ayuso, M J; García-Sanz-Calcedo, J and Reyes-Rodríguez, A M (2016) Qualitative and quantitative analyses on project deficiencies in flat-roof design in extremadura, Spain. Journal of Construction Engineering and Management, 142(11): 04016061, ISSN 0733-9364

Carter, G and Smith, S D (2006) Safety hazard identification on construction projects. Journal of Construction Engineering and Management, 132(2), pp. 197-205. ISSN 0733-9364

Carvalho, R; Zhang, F; Liu, T; Yu, R; Chen, E and Oh, E (2026) Amenity preferences and design evaluation in Australian build-to-rent compact apartments: A VR/EEG study. Building Research & Information, 54(2), pp. 158-178. ISSN 0961-3218

Castronovo, F (2016) Assessing problem-solving skills in construction education with the virtual construction simulator. PhD thesis, Pennsylvania State University, USA.

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Cevikbas, M and Işık, Z (2023) Detecting the most appropriate delay analysis methods for mega airport projects. Engineering, Construction and Architectural Management, 30(6), pp. 2463-2480. ISSN 0969-9988

Cevikcan, E and Kose, Y (2021) Optimization of profitability and liquidity for residential projects under debt and equity financing. Built Environment Project and Asset Management, 11(2), pp. 369-391. ISSN 2044-124X

Cha, C (2024) New insights on the roman brick industry: The production and distribution of ceramic building material in central Italy (ca. 50 bce-300 CE). PhD thesis, Florida State University, USA.

Chan, D W M; Hung, H T W; Chan, A P C and Lo, T K K (2014) Overview of the development and implementation of the mandatory building inspection scheme (MBIS) in Hong Kong. Built Environment Project and Asset Management, 4(1), pp. 71-89. ISSN 2044-124X

Charlson, J (2014) Law for engineering undergraduates on accredited courses 1. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(4), pp. 201-206. ISSN 17514304

Che Wan Putra, C W F (1998) CAPE construction application protocol for data transfer: a building data model. PhD thesis, University of Salford, UK.

Chen, J. H.; Su, M. C.; Lin, W. J.; Yu, T. and Wu, K. Y. (2026) Establishing smart system for building operation and maintenance using somcm algorithm. Engineering, Construction and Architectural Management, 33(5), pp. 3975-3995. ISSN 0969-9988

Chen, K W; Teitelbaum, E; Meggers, F; Pantelic, J and Rysanek, A (2021) Exploring membrane-assisted radiant cooling for designing comfortable naturally ventilated spaces in the tropics. Building Research & Information, 49(5), pp. 483-495. ISSN 0961-3218

Chen, L; Gao, K; Ma, G; Ma, H and Sun, Z (2025) Experimental study on pulse elimination of concrete pumping. Journal of Construction Engineering and Management, 151(1): 04024189, ISSN 0733-9364

Chen, L and Whyte, J (2022) Understanding design change propagation in complex engineering systems using a digital twin and design structure matrix. Engineering, Construction and Architectural Management, 29(8), pp. 2950-2975. ISSN 0969-9988

Chen, Q; Adey, B T; Haas, C T and Hall, D M (2022) Exploiting digitalization for the coordination of required changes to improve engineer-to-order materials flow management. Construction Innovation, 22(1), pp. 76-100. ISSN 1471-4175

Chen, Qian (2020) A systematic approach to enabling digital supply chain coordination in construction projects. PhD thesis, ETH Zürich, Switzerland.

Chen, S-M (2002) Intelligent scheduling model and multi-dimensional CM information system. PhD thesis, Columbia University, USA.

Chen, W (2019) Integration of building information modeling and internet of things for facility maintenance management. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Chen, W-T (1994) Developing a knowledge-based expert system to determine contract duration for highway construction. PhD thesis, University of Florida, USA.

Chen, Y; Fang, Q and Lan, Y (2025) Development of a modular assembling, suspended, and sliding scaffold. Journal of Construction Engineering and Management, 151(9): 04025131, ISSN 0733-9364

Cheng, M Y; Vu, Q T and Aldo, A (2026) Automated BIM parametric design for optimal external wall tile planning. International Journal of Construction Management, 26(1), pp. 131-151. ISSN 1562-3599

Cheung, F K T (2005) Development and testing of a method for forecasting prices of multi-storey buildings during the early design stage: The storey enclosure method revisited. PhD thesis, Queensland University of Technology, Australia.

Cheung, F K T and Skitmore, M (2006) A modified storey enclosure model. Construction Management and Economics, 24(4), pp. 391-405. ISSN 01446193

Chiwuzie, A; Dabara, D I; Omotehinshe, O J; Prince, E M and Aiyepada, E G (2021) Changing macroeconomic indicators and the rental values of residential properties in Ede Nigeria. African Journal of Built Environment Research, 5(1), pp. 1-18. ISSN 2414-0236

Chiwuzie, A; Dabara, D I; Prince, E M; Ajiboye, B O and Olawuyi, S T (2020) Housing-related attributes and the changing structure of preferences. African Journal of Built Environment Research, 4(1), pp. 37-58. ISSN 2414-0236

Cho, C; Kim, K; Park, J and Cho, Y K (2018) Data-driven monitoring system for preventing the collapse of scaffolding structures. Journal of Construction Engineering and Management, 144(8): 04018077, ISSN 0733-9364

Choi, J O; Chen, X B and Kim, T W (2019) Opportunities and challenges of modular methods in dense urban environment. International Journal of Construction Management, 19(2), pp. 93-105. ISSN 1562-3599

Choi, S D (2008) Postural balance and adaptations in transitioning sloped surfaces. International Journal of Construction Education and Research, 4(3), pp. 189-199. ISSN 1557-8771

Chow, V W and Leiringer, R (2014) The translation of power: A study of boundary objects in public engagement processes. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Christian, J and Mir, S U (1987) Use of integrated microcomputer package for formwork design. Journal of Construction Engineering and Management, 113(4), pp. 603-610. ISSN 0733-9364

Christodoulou, S E (1998) Optimum bid markup calculation in competitive bidding environments using fuzzy artificial neural networks. PhD thesis, Columbia University, USA.

Chro, A H R (2018) Sustainable renovation of residential buildings in subtropical climate zone. PhD thesis, University of Pécs, Hungary.

Chung, K H Y (2022) Data fusion, hedonic pricing, and blockchains: Lowering investment barriers for sustainable infrastructure. PhD thesis, University of Michigan, USA.

Clegg, D R (1999) A construction-specific simulation-based framework for earthworks. PhD thesis, Sheffield Hallam University, UK.

Comerford, P.; Kinnane, O.; O'Hegarty, R. and Crowe, P. (2026) Embodied carbon impacts of residential development siteworks: New assessment framework. Buildings & Cities, 7(1), pp. 467-487. ISSN 2632-6655

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(1), pp. 97-109. ISSN 2046-6099

Conzatti, A; Fosas De Pando, D; Chater, B and Coley, D (2025) Are simple models for natural ventilation suitable for shelter design? Buildings & Cities, 6(1), pp. 158-181. ISSN 2632-6655

Cook, M J; Shukla, Y; Rawal, R; Angelopoulos, C; Caruggi-De-faria, L; Loveday, D; Spentzou, E and Patel, J (2022) Integrating low energy cooling and ventilation strategies in Indian residences. Buildings & Cities, 3(1), pp. 279-296. ISSN 2632-6655

Cooney, J P; Oloke, D and Gyoh, L (2023) A novel heritage BIM (HBIM) framework development for heritage buildings refurbishment based on an investigative study of microorganisms. Journal of Engineering, Design and Technology, 21(4), pp. 1046-1082. ISSN 1726-0531

Cooper, E; Wang, Y; Stamp, S; Nijsen, T; de Graaf, P; Hofman, J; Inki, T; Driessen, R; Liebmann, J; Geven, I T M; Vervoort, K; La Manna, V P; Valster, S; de Wolf, P; Peltonen, S; Burman, E; Salminen, A; van Galen, R and Mumovic, D (2022) Why do people use portable air purifiers? Evidence from occupant surveys and air quality monitoring in homes in three European cities. Building Research & Information, 50(1-2), pp. 213-229. ISSN 0961-3218

Cooper, T E (1994) A knowledge-based construction claims advisor for the A.I.A. A201 general conditions document. PhD thesis, Auburn University, USA.

Crossley, B J (2015) Inter-organisational relationship trust repair: A ranked Delphi study with UK professionals. International Journal of Law in the Built Environment, 7(3), pp. 195-213. ISSN 1756-1450

Cruz Ortiz, M R P (2019) Expanding modular design: All-rise mass timber residences in Hawaii. DArch thesis, University of Hawai'i at Manoa, USA.

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Cruz Rios, F; Grau, D and Bilec, M (2021) Barriers and enablers to circular building design in the US: An empirical study. Journal of Construction Engineering and Management, 147(10): 04021117, ISSN 0733-9364

Dabash, M S (2022) Applications of computer vision to improve construction site safety and monitoring. PhD thesis, University of Delaware, USA.

Dabbas, M A A (1981) Computerized decision making in construction. PhD thesis, Georgia Institute of Technology, USA.

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

Dainty, A; Leiringer, R; Fernie, S and Harty, C (2017) BIM and the small construction firm: A critical perspective. Building Research & Information, 45(6), pp. 696-709. ISSN 0961-3218

Dan, Y and Liu, G (2024) Integrated scheduling optimization of production and transportation for precast component with delivery time window. Engineering, Construction and Architectural Management, 31(8), pp. 3335-3355. ISSN 0969-9988

Dang, C N and Le-Hoai, L (2018) Revisiting storey enclosure method for early estimation of structural building construction cost. Engineering, Construction and Architectural Management, 25(7), pp. 877-895. ISSN 0969-9988

Davies, M; Jackaway, A; Hardy, R; Dewey, E and Littler, J (2000) A translucent louvre system: Design concepts, modelling work and monitored data. Building Research & Information, 28(1), pp. 42-50. ISSN 0961-3218

Dawood, N N; Hobbs, B and Fanning, A (1999) Standardization of brickwork construction: Process identification. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Dawood, N N; Hobbs, B and Fanning, A (2001) Standardization of brickwork construction: Identification and measurement of standard processes. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Day, K (2024) Emulating the past, envisioning the future: A study of CAD file preservation in Australian architectural practices. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Day, K and Martel, A (2021) Designing for neurodiversity: Reimagining the home for a COVID normal life. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

De Wilde, P; Augenbroe, G and Van Der Voorden, M (2002) Managing the selection of energy saving features in building design. Engineering, Construction and Architectural Management, 9(3), pp. 192-208. ISSN 0969-9988

De Wilde, P J C J (2004) Computational support for the selection of energy saving building components. PhD thesis, Delft University of Technology, Netherlands.

Dehghan, R (2012) A new model, algorithm and computer tool to optimize overlapping of design activities in construction projects. PhD thesis, University of Calgary, Canada.

Delaney, F T (2003) Effectiveness of mergers and acquisitions and corporate financial performance in construction. PhD thesis, Edinburgh Napier University, UK.

Delghust, M; Roelens, W; Tanghe, T; De Weerdt, Y and Janssens, A (2015) Regulatory energy calculations versus real energy use in high-performance houses. Building Research & Information, 43(6), pp. 675-690. ISSN 0961-3218

Deng, H; Hong, H; Luo, D; Deng, Y and Su, C (2020) Automatic indoor construction process monitoring for tiles based on BIM and computer vision. Journal of Construction Engineering and Management, 146(1): 04019095, ISSN 0733-9364

Dent, S and Smallwood, J J (2014) Building economics pre-course student perceptions. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Deshmukh, A; Oh, E H and Hastak, M (2011) Impact of flood damaged critical infrastructure on communities and industries. Built Environment Project and Asset Management, 1(2), pp. 156-175. ISSN 2044-124X

Dhakal, S; Zhang, L and Lv, X (2022) Ontology-based semantic modelling to support knowledge-based document classification on disaster-resilient construction practices. International Journal of Construction Management, 22(11), pp. 2059-2078. ISSN 1562-3599

Dharwadkar, P V (1994) A prototype object-oriented system for three-dimensional CAD and schedule integration. PhD thesis, University of Texas at Austin, USA.

Di Ruocco, G; Melella, R and Marino, V (2022) An integrated assessment method for the sustainability of the opaque building envelope in residential buildings with Italian gbc-home certification. Architectural Engineering and Design Management, 18(4), pp. 545-570. ISSN 1745-2007

Din, A (2020) Accounting for carbon impacts in buildings: a rating procedure. PhD thesis, London Metropolitan University, UK.

Din, Z U and Bernold, L E (2017) Experimental study of signal behavior for wireless communication in construction. Construction Innovation, 17(4), pp. 475-491. ISSN 1471-4175

Doczy, R (2018) Risk-benefit analysis and optimization of LEED-certified school buildings design and construction: Statisitical and machine learning approaches. PhD thesis, Florida State University, USA.

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Dormohamadi, M; Tahbaz, M and Velashjerdi Farahani, A (2025) Performance evaluation of a single-side windcatcher in the transitional seasons (case study: Khousf Town, Southern Khorasan Province, Iran). International Journal of Building Pathology and Adaptation, 43(3), pp. 338-368. ISSN 2398-4708

Dorrah, D H (2024) Development of integrated decision support framework for payment management and negotiation in construction projects. PhD thesis, University of Toronto, Canada.

Dos Santos, A; da Rocha, C G and Lepre, P (2010) Barriers and opportunities in developing 'do-it-yourself' products for low-income housing. Journal of Construction in Developing Countries, 15(1), pp. 29-43. ISSN 1823-6499

Dowsett, R; Harty, C and Davies, R (2017) Epistemological differences and new technology in construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Drury, P; Watson, S and Lomas, K J (2021) Summertime overheating in UK homes: Is there a safe haven? Buildings & Cities, 2(1), pp. 970-990. ISSN 2632-6655

Du, W; M.E. Sepasgozar, S; Khan, A; Shirowzhan, S and Garzon Romero, J (2025) Developing an interactive pile training module for construction risk management and gaging users' intentions. Construction Innovation, 25(3), pp. 893-911. ISSN 1471-4175

Duan, P; Zhou, J and Tao, S (2023) Risk events recognition using smartphone and machine learning in construction workers' material handling tasks. Engineering, Construction and Architectural Management, 30(8), pp. 3562-3582. ISSN 0969-9988

Duanshun, Li (2018) Towards fully integrated and automated construction planning on earthworks projects. PhD thesis, University of Alberta, Canada.

Duffield, Colin F (2001) An evaluation framework for privately funded infrastructure projects in Australia. PhD thesis, University of Melbourne, Australia.

Duffy, G A; Oberlender, G D and Seok Jeong, D H (2011) Linear scheduling model with varying production rates. Journal of Construction Engineering and Management, 137(8), pp. 574-582. ISSN 0733-9364

Dunstone, Philip H (1977) The practical application of combinations of numbers and of combinations of shapes to buildings. PhD thesis, Aston University, UK.

Dzeng, R J; Tserng, H P and Wang, W C (2005) Automating schedule review for expressway construction. Journal of Construction Engineering and Management, 131(1), pp. 127-136. ISSN 0733-9364

Dzeng, R J; Wang, W C and Tserng, H P (2004) Module-based construction schedule administration for public infrastructure agencies. Journal of Construction Engineering and Management, 130(1), pp. 5-14. ISSN 0733-9364

Dzeng, R-J (1995) Caseplan: A case-based planner and scheduler for construction using product modeling. PhD thesis, University of Michigan, USA.

Ebbert, T (2010) Re-face: Refurbishment strategies for the technical improvement of office façades. PhD thesis, Delft University of Technology, Netherlands.

Ebekozien, A and Aigbavboa, C O (2024) Improving quantity surveying education through continually updating curriculum digitalisation to meet industry requirements. Journal of Engineering, Design and Technology, 22(5), pp. 1523-1543. ISSN 1726-0531

Ebekozien, A; Aigbavboa, C O; Adekunle, S A; Aliu, J and Thwala, W D (2024) Training needs of built environment professionals: The role of fourth industrial revolution. Engineering, Construction and Architectural Management, 31(11), pp. 4353-4371. ISSN 0969-9988

Ebiloma, D. O.; Aigbavboa, C. O. and Anumba, C. (2026) Key drivers of digital twin maintenance management for healthcare facilities in Nigeria. Engineering, Construction and Architectural Management, 33(3), pp. 1871-1890. ISSN 0969-9988

Ebrahimigharehbaghi, S; Qian, Q K; de Vries, G and Visscher, H J (2022) Identification of the behavioural factors in the decision-making processes of the energy efficiency renovations: Dutch homeowners. Building Research & Information, 50(4), pp. 369-393. ISSN 0961-3218

Echeverria-Valiente, E; Garcia-Alvarado, R; Celis-D’Amico, F and Saelzer-Fuica, G (2019) Integrated design experiences for energy-efficient housing in Chile. Construction Innovation, 19(2), pp. 236-255. ISSN 1471-4175

Echeverry, D (1991) Factors for generating initial construction schedules. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Echeverry, D; Ibbs, C W and Kim, S (1991) Sequencing knowledge for construction scheduling. Journal of Construction Engineering and Management, 117(1), pp. 118-130. ISSN 0733-9364

Eid, M S (2017) Sustainable infrastructure development: A holistic system based decision making framework integrating vulnerability indicators and stakeholders objectives. PhD thesis, University of Tennessee, USA.

Eid, M S; Elbeltagi, E E and El-Adaway, I H (2021) Simultaneous multi-criteria optimization for scheduling linear infrastructure projects. International Journal of Construction Management, 21(1), pp. 41-55. ISSN 1562-3599

Eisazadeh, N; De Troyer, F and Allacker, K (2025) Environmental performance of patient rooms using an integrated approach considering operational energy, daylight and comfort analysis. Smart and Sustainable Built Environment, 14(4), pp. 1117-1142. ISSN 2046-6099

Ekanayake, E M K and Perera, B A K S (2016) Appropriate delay analysis techniques to analyse delays in road construction projects in Sri Lanka. Built Environment Project and Asset Management, 6(5), pp. 521-534. ISSN 2044-124X

El-Deeb, K (2024) Energy performance assessment of venetian blinds in south-oriented residential spaces in hot arid desert climates. Construction Innovation, 24(6), pp. 1460-1482. ISSN 1471-4175

El-Medany, W M; Al-Omary, A; Al-Hakim, R and Nusaif, M (2014) Low cost real-time tracking system prototype using gm862 cellular quad band module. Journal of Engineering, Design and Technology, 12(3), pp. 389-407.

El-Rayes, K (2001) Object-oriented model for repetitive construction scheduling. Journal of Construction Engineering and Management, 127(3), pp. 199-205. ISSN 0733-9364

El-Rayes, K (2001) Optimum planning of highway construction under A+B bidding method. Journal of Construction Engineering and Management, 127(4), pp. 261-269. ISSN 0733-9364

El-Rayes, K; Ramanathan, R and Moselhi, O (2002) An object-oriented model for planning and control of housing construction. Construction Management and Economics, 20(3), pp. 201-210. ISSN 01446193

El-Rayes, K A (1998) Optimized scheduling for repetitive construction projects. PhD thesis, Concordia University, Canada.

El-khawas, I N (1997) The optimal design of buildings: A life-cycle approach to energy efficiency. PhD thesis, Ohio State University, USA.

Elazouni, A M and Metwally, F G (2000) D-sub: Decision support system for subcontracting construction works. Journal of Construction Engineering and Management, 126(3), pp. 191-199. ISSN 0733-9364

Elbashbishy, T and El-Adaway, I H (2023) System dynamic modeling to study the impact of construction industry characteristics and associated macroeconomic indicators on workforce size and labor retention rate. Journal of Construction Engineering and Management, 149(10): 04023100, ISSN 0733-9364

Elhakeem, A A M (2006) An asset management framework for educational buildings with life-cycle cost analysis. PhD thesis, University of Waterloo, Canada.

Elkabalawy, M and Moselhi, O (2022) Optimized resource-constrained method for project schedule compression. Engineering, Construction and Architectural Management, 29(5), pp. 2106-2129. ISSN 0969-9988

Elkhayat, Y.; Moran, P.; Barrett, S.; Barry, P. and Goggins, J. (2026) Developing a methodology with a tool for calculating and reducing the upfront carbon emissions of buildings: Ireland as a case study. Architectural Engineering and Design Management, 22(1), pp. 168-187. ISSN 1745-2007

Elkhayat, Y O; Ibrahim, M G; Tokimatsu, K and Ali, A A M M (2020) Life cycle cost analysis on three high-performance glazing systems for an office building in New Cairo, Egypt. Architectural Engineering and Design Management, 17(1-2), pp. 131-145. ISSN 1745-2007

Ellis, R C T (2001) Lessons in project management. PhD thesis, Loughborough University, UK.

Ellis, R C T; Wood, G D and Thorpe, T (2004) Technology-based learning and the project manager. Engineering, Construction and Architectural Management, 11(5), pp. 358-365. ISSN 0969-9988

Elmahroug, M H M (2018) Facilitating effective external stakeholder involvement in the pre-design phase of civil engineering infrastructure projects. PhD thesis, University of Leeds, UK.

Elmualim, A A (2008) Moral leadership education in construction. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Elsheikh, A; Motawa, I and Diab, E (2023) Multi-objective genetic algorithm optimization model for energy efficiency of residential building envelope under different climatic conditions in Egypt. International Journal of Construction Management, 23(7), pp. 1244-1253. ISSN 1562-3599

Emmitt, S (2005) Integrating teaching and research in an architectural technology undergraduate model. Journal of Engineering, Design and Technology, 3(2), pp. 164-179. ISSN 1726-0531

Emmitt, S and West, B (2003) Incorporating research into an undergraduate module: Learning to detail from first (ecologically sound) principles. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Emuze, F (2020) Factors causing fatigue and safety-related errors on construction sites in bloemfontein. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Engida Woldemichael, D. and Mohd Hashim, F. (2011) A framework for functionbased conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

Engida Woldemichael, D and Mohd Hashim, F (2011) A framework for function-based conceptual design support system. Journal of Engineering, Design and Technology, 9(3), pp. 250-272. ISSN 1726-0531

English, J and Abrahams, S (2015) Inclusion of HIV/AIDS awareness in core curricula for construction economics and management students. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Erkoreka, A; Flores-Abascal, I; Escudero, C; Martin, K; Millan, J A and Sala, J M (2020) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(1), pp. 148-175. ISSN 23984708

Eromobor, S O; Das, D K and Emuze, F (2020) Influence of building and indoor environmental parameters on designing energy-efficient buildings. International Journal of Building Pathology and Adaptation, 39(3), pp. 507-524. ISSN 23984708

Esders, M C (2017) Consideration of uncertain future demand and decision flexibility in the determination of intervention programs for buildings. DSc thesis, ETH Zürich, Switzerland.

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. I: Analysis at the fundamental level. Journal of Construction Engineering and Management, 141(8): 04015021, ISSN 0733-9364

Essah, E A; Sanders, C H; Baker, P and Kalagasidis, A S (2009) Condensation and moisture transport in cold roofs: Effects of roof underlay. Building Research & Information, 37(2), pp. 117-128. ISSN 0961-3218

Eyssautier-Chuine, S; Mouhoubi, K; Reffuveille, F and Bodnar, J L (2020) Thermographic imaging for early detection of biocolonization on buildings. Building Research & Information, 48(8), pp. 856-865. ISSN 0961-3218

Fallahtafti, R and Mahdavinejad, M (2021) Window geometry impact on a room's wind comfort. Engineering, Construction and Architectural Management, 28(9), pp. 2381-2410. ISSN 0969-9988

Falorca, J F and Lanzinha, J C G (2021) Facade inspections with drones–theoretical analysis and exploratory tests. International Journal of Building Pathology and Adaptation, 39(2), pp. 235-258. ISSN 23984708

Fan, S L and Tserng, H P (2006) Object-oriented scheduling for repetitive projects with soft logics. Journal of Construction Engineering and Management, 132(1), pp. 35-48. ISSN 0733-9364

Farahani, A; Wallbaum, H and Dalenbäck, J O (2019) Optimized maintenance and renovation scheduling in multifamily buildings: a systematic approach based on condition state and life cycle cost of building components. Construction Management and Economics, 37(3), pp. 139-155. ISSN 01446193

Farajmandi, M; Ali, M; Hermann, R and AbouRizk, S (2020) A decision support tool for planning module installation in industrial construction. Engineering, Construction and Architectural Management, 27(9), pp. 2615-2641. ISSN 0969-9988

Farokhnia, K (2013) Nonstructural vulnerability functions for building categories. PhD thesis, University of Colorado at Boulder, USA.

Fasakin, J O and Ogunsemi, D R (2003) Modelling the selling prices of residential buildings in Nigeria. Journal of Financial Management of Property and Construction, 8(2), pp. 111-114. ISSN 1366-4387

Fayek, Aminah (1996) A competitive estimating and tendering strategy model for use in the civil engineering construction industry. PhD thesis, University of Melbourne, Australia.

Fazeli, A; Jalaei, F; Khanzadi, M and Banihashemi, S (2022) BIM-integrated TOPSIS-fuzzy framework to optimize selection of sustainable building components. International Journal of Construction Management, 22(7), pp. 1240-1259. ISSN 1562-3599

Feng, X; Ahmed, V and Mahdjoubi, L (2003) Spatial visualization of building components. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Ferguson, M (2020) Improving mobile robot navigation with dynamic building information models and stochastic neural control. PhD thesis, Stanford University, USA.

Ferreira, C; Canhoto Neves, L; Silva, A and de Brito, J (2019) Stochastic Petri-net models to predict the degradation of ceramic claddings. Building Research & Information, 47(6), pp. 697-715. ISSN 0961-3218

Finke, M R (1999) Window analyses of compensable delays. Journal of Construction Engineering and Management, 125(2), pp. 96-100. ISSN 0733-9364

Fisher, D J and Rajan, N (1996) Automated constructibility analysis of work-zone traffic-control planning. Journal of Construction Engineering and Management, 122(1), pp. 36-43. ISSN 0733-9364

Flanagan, R; Norman, G and Worrall, H (1995) Trade performance of the UK building materials and components industries. Engineering, Construction and Architectural Management, 2(2), pp. 141-162. ISSN 0969-9988

Ford, B; Wilson, R; Gillott, M; Ibraheem, O; Salmeron, J and Sanchez, F J (2012) Passive downdraught evaporative cooling: Performance in a prototype house. Building Research & Information, 40(3), pp. 290-304. ISSN 0961-3218

Forghani, R; Sher, W and Kanjanabootra, S (2023) Critical technical design principles for maximizing the reuse of building components. International Journal of Construction Management, 23(7), pp. 1187-1195. ISSN 1562-3599

Forooraghi, M; Miedema, E; Ryd, N; Wallbaum, H and Babapour Chafi, M (2023) Relationship between the design characteristics of activity-based flexible offices and users' perceptions of privacy and social interactions. Building Research & Information, 51(5), pp. 588-604. ISSN 0961-3218

Forsythe, P (2006) Consumer-perceived appearance tolerances in construction quality management. Engineering, Construction and Architectural Management, 13(3), pp. 307-318. ISSN 0969-9988

Fortea, S M E (1989) An investigation of appropriateness relative to indigenous and modern housing in Libya. PhD thesis, Heriot-Watt University, UK.

Fortune, C and Hinks, J (1998) Strategic building project price forecasting models in use: Paradigm shift postponed. Journal of Financial Management of Property and Construction, 3(1), pp. 5-26. ISSN 1366-4387

Fortune, C and Lees, M (2001) Systematic errors of judgement and the formulation of strategic cost advice for construction clients. Journal of Financial Management of Property and Construction, 6(2), pp. 81-93. ISSN 1366-4387

Fox, S (2003) A matrix to indicate the utility of technologies. Construction Management and Economics, 21(2), pp. 187-196. ISSN 01446193

Fox, S J (2001) Application of design for manufacture principles to building design and construction. PhD thesis, Sheffield Hallam University, UK.

França, Ana Judite Galbiatti Limongi (2016) Continuous improvement applied to standardized typology of buildings: Knowledge management in the context of the asset portfolio. PhD thesis, Universidade de São Paulo, Brazil.

Fredriksson, A; Kjellsdotter Ivert, L and Naz, F (2025) Creating logistics service value in construction: A quest of coordinating modules in a loosely coupled system. Construction Management and Economics, 43(6), pp. 428-445. ISSN 0144-6193

Friedman, A and Cammalleri, V (1997) Selection criteria for energy-efficient windows. Building Research & Information, 25(4), pp. 234-238. ISSN 0961-3218

Fuller, R J and Luther, M B (2002) Thermal simulation of an Australian university building. Building Research & Information, 30(4), pp. 255-263. ISSN 0961-3218

Galbraith, G H; McLean, R C; Gillespie, I; Guo, J and Kelly, D (1998) Nonisothermal moisture diffusion in porous building materials. Building Research & Information, 26(6), pp. 330-339. ISSN 0961-3218

Galbraith, G H; McLean, R C and Kelly, D (1997) Moisture permeability measurements under varying barometric pressure. Building Research & Information, 25(6), pp. 348-353. ISSN 0961-3218

Galvin, R (2014) Why German homeowners are reluctant to retrofit. Building Research & Information, 42(4), pp. 398-408. ISSN 0961-3218

Gao, C. M.; Wong, K. Y. and Mohd Maulana, M. I. I. (2026) Remanufacturing in the construction industry: Key factors, job competencies, and implementation framework. International Journal of Building Pathology and Adaptation, 44(5), pp. 1329-1360. ISSN 2398-4708

Gao, X; Pishdad-Bozorgi, P; Shelden, D R and Tang, S (2021) Internet of things enabled data acquisition framework for smart building applications. Journal of Construction Engineering and Management, 147(2): 04020169, ISSN 0733-9364

Geekiyanage, D; Ramachandra, T and Rotimi, J O B (2017) A morphology-based model for forecasting cooling energy demand of condominium buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Genc, O (2021) Symbioconstruction: A bibliography-driven dynamic construction industry symbiosis database. Journal of Construction Engineering and Management, 147(8): 04021077, ISSN 0733-9364

Gerhardsson, K M and Laike, T (2021) Windows: A study of residents' perceptions and uses in Sweden. Buildings & Cities, 2(1), pp. 467-486. ISSN 2632-6655

Gerstenberger, A J (2021) Modeling the likelihood of construction incidents using public data. EdD thesis, Teachers College, Columbia University, USA.

Ghadiri, S T; Pazhouhanfar, M and Saberi, M (2026) Impact of architectural design characteristics of railway stations on travellers' preferences: A digital design method. Building Research & Information, 54(2), pp. 179-197. ISSN 0961-3218

Ghafoori, M (2023) Developing building maintenance and upgrade system (BMUS) to minimize operational cost of existing buildings within available budgets. PhD thesis, University of Colorado at Denver, USA.

Ghafoori, M and Abdallah, M (2022) Simulation-based optimization model to minimize equivalent annual cost of existing buildings. Journal of Construction Engineering and Management, 148(2): 04021202, ISSN 0733-9364

Ghanbari, M; Rusch, R and Skitmore, M (2024) BIM-based environmental assessment of residential renovation projects during the operational phase. Architectural Engineering and Design Management, 20(3), pp. 624-635. ISSN 1745-2007

Ghannad, P and Lee, Y C (2023) Optimizing modularization of residential housing designs for rapid postdisaster mass production of housing. Journal of Construction Engineering and Management, 149(7): 04023046, ISSN 0733-9364

Ghavidel, A (2025) AI-informed multi-threat decision-support methodology for long-term bridge asset management. PhD thesis, University of Texas at San Antonio, USA.

Ghodki, M K; Swarup, A and Pal, Y (2020) A new IR and sprinkler based embedded controller directed robotic arm for automatic cleaning of solar panel. Journal of Engineering, Design and Technology, 18(4), pp. 905-921. ISSN 1726-0531

Ghorbani Naeini, H; Norouziasas, A; Piraei, F; Kazemi, M; Kazemi, M and Hamdy, M (2024) Impact of building envelope parameters on occupants’ thermal comfort and energy use in courtyard houses. Architectural Engineering and Design Management, 20(6), pp. 1725-1751. ISSN 1745-2007

Ghosh, S; Kochhar, K; Sharma, A; Kaushal, S; Agrawal, J; Garg, A; Kumar, A and Dugar, Y (2016) Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India's upcoming smart cities. Smart and Sustainable Built Environment, 5(4), pp. 372-392. ISSN 2046-6099

Ghosh, S; Krishna, S R; Billton, J V; Srikanth, S A; Mohandas, S; Ashwin Ganesh, M and Shiv Kulin, C (2021) Countering tropical cyclonic storm impacts on low-rise houses. Smart and Sustainable Built Environment, 10(4), pp. 631-652. ISSN 2046-6099

Gijsbers, R and Lichtenberg, J (2014) Demand driven selection of adaptable building technologies for flexibility-in-use. Smart and Sustainable Built Environment, 3(3), pp. 237-260. ISSN 2046-6099

Gil, N and Tommelein, I D (2003) Using product and process flexibility to cope with project delivery uncertainty. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Gilani, S and O’Brien, W (2021) Natural ventilation usability under climate change in Canada and the United States. Building Research & Information, 49(4), pp. 367-386. ISSN 0961-3218

Gilmour, Tony (2009) Network power: An international study of strengthening housing association capacity. PhD thesis, University of Sydney, Australia.

Ginigaddara, B; Perera, S; Feng, Y; Rahnamayiezekavat, P and Thomson, R (2023) Development of offsite construction skill profile prediction models using mixed-effect regression analysis. Construction Management and Economics, 41(10), pp. 820-839. ISSN 01446193

Gluch, P (2009) Unfolding roles and identities of professionals in construction projects: Exploring the informality of practices. Construction Management and Economics, 27(10), pp. 959-968. ISSN 1466433X

Godbolt, Å L; Flyen, C; Hauge, Å L; Flyen, A C and Moen, L L (2018) Future resilience of cultural heritage buildings: how do residents make sense of public authorities' sustainability measures? International Journal of Disaster Resilience in the Built Environment, 9(1), pp. 18-30. ISSN 1759-5916

Godoy-Shimizu, D; Hong, S M; Korolija, I; Schwartz, Y; Mavrogianni, A and Mumovic, D (2022) Pathways to improving the school stock of England towards net zero. Buildings & Cities, 3(1), pp. 939-963. ISSN 2632-6655

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Goldman, C M (2025) The built environment and employee well-being: An investigation into the attributes and impacts of supportive physical work environments in long-term care facilities. PhD thesis, University of Colorado at Denver, USA.

Golzan, S S; Pouyanmehr, M and Sadeghi Naeini, H (2023) Recommended angle of a modular dynamic façade in hot-arid climate: Daylighting and energy simulation. Smart and Sustainable Built Environment, 12(1), pp. 27-37. ISSN 2046-6099

Goncalves, Gustavo Henrique Vital (2022) Scenarios and support system for consortium management of construction waste applied to water resources management unit 12. PhD thesis, Universidade Federal de São Carlos, Brazil.

Gongming, M (2018) The influence of trust on risk allocation in Chinese PPP projects. PhD thesis, ISCTE - Instituto Universitario de Lisboa, Portugal.

González-Prieto, D; Fernández-Nava, Y; Marañón, E and Prieto, M M (2021) Environmental life cycle assessment based on the retrofitting of a twentieth-century heritage building in Spain, with electricity decarbonization scenarios. Building Research & Information, 49(8), pp. 859-877. ISSN 0961-3218

Gorgolewski, M (2008) Designing with reused building components: Some challenges. Building Research & Information, 36(2), pp. 175-188. ISSN 0961-3218

Gosling, J; Pero, M; Schoenwitz, M; Towill, D and Cigolini, R (2016) Defining and categorizing modules in building projects: An international perspective. Journal of Construction Engineering and Management, 142(11): 04016062, ISSN 0733-9364

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Goulding, J; Sexton, M; Zhang, X; Kagioglou, M; Aouad, G F and Barrett, P (2007) Technology adoption: Breaking down barriers using a virtual reality design support tool for hybrid concrete. Construction Management and Economics, 25(12), pp. 1239-1250. ISSN 1466433X

Gowri, K (1990) Knowledge-based system approach to building envelope design. PhD thesis, Concordia University, Canada.

Graham, P; Nourian, P; Warwick, E and Gath-Morad, M (2024) 'Rightsize': a housing design game for spatial and energy sufficiency. Buildings & Cities, 5(1), pp. 316-330. ISSN 2632-6655

Graig, N (2007) The prevailing trends of defects and snagging in new homes in the UK. PhD thesis, Glasgow Caledonian University, UK.

Grant, A and Ries, R (2013) Impact of building service life models on life cycle assessment. Building Research & Information, 41(2), pp. 168-186. ISSN 0961-3218

Greer, Fiona Muriel (2021) Life-cycle environmental and economic management of airport infrastructure and operations. PhD thesis, University of California, USA.

Gremyr, I; Bäckstrand, J; Fredriksson, A; Gatenholm, G and Halldórsson, Á (2023) Blueprinting construction logistics services for quality improvement. Construction Management and Economics, 41(1), pp. 60-78. ISSN 01446193

Griffiths, P W; Norton, B; Eames, P C and Lo, S N G (1996) Detailed simulation of heat transfer across planar evacuated glazing. Building Research & Information, 24(3), pp. 141-147. ISSN 0961-3218

Grobler, F (1988) Object-oriented data representation for unified construction project information. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Guerra, M. A.; Carvalho, M. S.; Pimentel, C.; Duarte, C. and Costa, S. (2026) Determining different levels of modularization on a construction project through a product architecture modularity decomposition approach: A case study. Journal of Engineering, Design and Technology, 24(3), pp. 713-733. ISSN 1726-0531

Guerra-Santin, O and Silvester, S (2017) Development of Dutch occupancy and heating profiles for building simulation. Building Research & Information, 45(4), pp. 396-413. ISSN 0961-3218

Guggemos, A A (2003) Environmental impacts of on-site construction processes: Focus on structural frames. PhD thesis, University of California, Berkeley, USA.

Gunarathna, C; Yang, R; Wijeratne Mudiyanselage, P; Amarasinghe, G; Samarasinghalage, T; Weerasinghe, R P N; Zhao, H; Zhang, C; Liu, C; Wang, K and Dev Sureshkumar Jayakumari, S (2024) Project-based learning for proactive skills development of postgraduate students in solar energy building design digitalisation. Smart and Sustainable Built Environment, 13(4), pp. 828-855. ISSN 2046-6099

Gunay, H B; O'Brien, W; Beausoleil-Morrison, I and Huchuk, B (2014) On adaptive occupant-learning window blind and lighting controls. Building Research & Information, 42(6), pp. 739-756. ISSN 0961-3218

Guo, H; Yu, Y; Ding, Q and Skitmore, M (2018) Image-and-skeleton-based parameterized approach to real-time identification of construction workers' unsafe behaviors. Journal of Construction Engineering and Management, 144(6): 04018042, ISSN 0733-9364

Guo, X; Wu, H; Chen, Y; Chang, Y and Ao, Y (2023) Gauging the impact of personal lifestyle, indoor environmental quality and work-related factors on occupant productivity when working from home. Engineering, Construction and Architectural Management, 30(8), pp. 3713-3730. ISSN 0969-9988

Gupta, R; Barnfield, L and Gregg, M (2017) Overheating in care settings: Magnitude, causes, preparedness and remedies. Building Research & Information, 45(1-2), pp. 83-101. ISSN 0961-3218

Guzel, Z. T. (2026) Institutionalizing the disaster-space nexus in landscape architecture education: A curriculum analysis across Türkiye. International Journal of Disaster Resilience in the Built Environment, 17(4), pp. 527-550. ISSN 1759-5908

Gyadu-Asiedu, W; Anewuoh, F and Appiadu-Boakye, K (2023) The real estate market in Ghana: The nexus between price and income levels. Built Environment Project and Asset Management, 13(1), pp. 56-72. ISSN 2044-124X

Gómez-Sirvent, J L; Fernández-Sotos, D; Fernández-Sotos, A; Sánchez-Reolid, R; López de la Rosa, F and Fernández-Caballero, A (2024) Exploring the impact of windows on musicians' experience: A neuroarchitecture perspective. Building Research & Information, 52(7), pp. 765-780. ISSN 0961-3218

Haghighi, Z (2022) Architectural photovoltaic application. PhD thesis, Delft University of Technology, Netherlands.

Haik, R; Peled, A and Meir, I A (2021) Thermal performance of alternative binders lime hemp concrete (lhc) building: Comparison with conventional building materials. Building Research & Information, 49(7), pp. 763-776. ISSN 0961-3218

Hajibabai, L (2014) Scheduling and routing of service trucks and planning of resource replenishment locations for winter roadway maintenance. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hajizadeh, S. and Seyis, S. (2026) Multi-climate zone approach to sustainable retrofitting for optimizing energy efficiency and CO2 reduction in Australian detached houses. International Journal of Building Pathology and Adaptation, 44(4), pp. 885-909. ISSN 2398-4708

Hall, D M (2017) The early stages of integrated project delivery: Institutionalization and impact on adoption of systemic innovations. PhD thesis, Stanford University, USA.

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hamida, A; Alsudairi, A; Alshaibani, K and Alshamrani, O (2021) Environmental impacts cost assessment model of residential building using an artificial neural network. Engineering, Construction and Architectural Management, 28(10), pp. 3190-3215. ISSN 0969-9988

Hamida, A; Alsudairi, A; Alshaibani, K and Alshamrani, O (2022) Parametric study of the impact of building envelope systems on embodied and operational carbon of residential buildings. International Journal of Building Pathology and Adaptation, 40(5), pp. 753-774. ISSN 23984708

Hamilton, A; Mitchell, G and Yli-Karjanmaa, S (2002) The BEQUEST toolkit: A decision support system for urban sustainability. Building Research & Information, 30(2), pp. 109-115. ISSN 0961-3218

Hamilton, I G; Shipworth, D; Summerfield, A J; Steadman, P; Oreszczyn, T and Lowe, R (2014) Uptake of energy efficiency interventions in English dwellings. Building Research & Information, 42(3), pp. 255-275. ISSN 0961-3218

Hammad, A; Akbarnezhad, A; Grzybowska, H; Wu, P and Wang, X (2019) Mathematical optimisation of location and design of windows by considering energy performance, lighting and privacy of buildings. Smart and Sustainable Built Environment, 8(2), pp. 117-137. ISSN 2046-6099

Han, J; Kim, J; Kim, S and Wang, S (2024) Effectiveness of image augmentation techniques on detection of building characteristics from street view images using deep learning. Journal of Construction Engineering and Management, 150(10): 04024129, ISSN 0733-9364

Han, Sang Hyeok (2014) BIM-based motion planning of mobile crane operation in modular-based heavy construction sites. PhD thesis, University of Alberta, Canada.

Hansen, A R; Gram-Hanssen, K and Knudsen, H N (2018) How building design and technologies influence heat-related habits. Building Research & Information, 46(1), pp. 83-98. ISSN 0961-3218

Harinarain, N and Haupt, T C (2016) Mission: Studio based learning in construction. The University of KwaZulu-Natal case study. Journal of Engineering, Design and Technology, 14(1), pp. 160-181.

Hariyadi, A; Fukuda, H and Ma, Q (2017) The effectiveness of the parametric design 'sudare' blind as external shading for energy efficiency and visibility quality in Jakarta. Architectural Engineering and Design Management, 13(5), pp. 384-403. ISSN 1745-2007

Harmansah, O (2005) Spatial narratives, commemorative practices and the building project: New urban foundations in upper syro-mesopotamia during the early iron age. PhD thesis, University of Pennsylvania, USA.

Haroglu, H (2010) Investigating the structural frame decision making process. EngD thesis, Loughborough University, UK.

Haroglu, H; Glass, J and Thorpe, T (2009) A study of professional perspectives on structural frame selection. Construction Management and Economics, 27(12), pp. 1209-1217. ISSN 1466433X

Harun, Z B (1993) Computer simulation in decision support systems for management of construction projects. PhD thesis, University of Leeds, UK.

Hasan, M and Lu, M (2021) Error propagation model for analyzing project labor cost budget risks in industrial construction. Journal of Construction Engineering and Management, 147(4): 2010, ISSN 0733-9364

Hasan, R (2025) Megaproject announcements' impact on firm value: Evidence from international project finance deals. PhD thesis, Southern New Hampshire University, USA.

Hasan, S; Al-Hussein, M; Hermann, U H and Safouhi, H (2010) Interactive and dynamic integrated module for mobile cranes supporting system design. Journal of Construction Engineering and Management, 136(2), pp. 179-186. ISSN 0733-9364

Hassan, A; El-Rayes, K and Attalla, M (2021) Optimizing the scheduling of crew deployments in repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 28(6), pp. 1615-1634. ISSN 0969-9988

Hassan, N M; Al Maazmi, T; Al Hadhrami, A and Al Hosani, M (2016) Discrete event simulation: A vital tool for a concurrent life cycle design. Construction Innovation, 16(1), pp. 67-80. ISSN 1471-4175

Hassan, Z (1997) CONPLAN: Construction planning and buildability evaluation in an integrated and intelligent construction environment. PhD thesis, University of Salford, UK.

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2024) An assessment of users' satisfaction with a smart building on university campus through post-occupancy evaluation. Journal of Engineering, Design and Technology, 22(4), pp. 1119-1135. ISSN 1726-0531

Hassanein, A and Moselhi, O (2004) Planning and scheduling highway construction. Journal of Construction Engineering and Management, 130(5), pp. 638-646. ISSN 0733-9364

Hassanein, A A G and Melin, J W (1996) Time constraints set by prime contractors for their sub-contractors. Building Research & Information, 24(5), pp. 293-301. ISSN 0961-3218

Hauck, A J (1990) Development and evaluation of computerized construction estimating, pricing, and bidding programs using integrated applications software. PhD thesis, University of Maryland, College Park, USA.

Haymaker, J (2004) The perspective approach: Enabling engineers to construct and integrate views and generate an evolving project model. PhD thesis, Stanford University, USA.

He, J.; Chen, H.; Yang, H.; Li, P. and Zheng, Z. (2026) Text2Onto-Agent: An llm agent-based end-to-end automated ontology construction method anda case study of green building domain modeling. Journal of Construction Engineering and Management, 152(9): 04026153, ISSN 0733-9364

He, Q and Ng, S T (2017) Energy-efficient window retrofit for existing high-rise residential buildings with the consideration of mutual shading. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

He, W (1997) Pavement project optimization and analysis. PhD thesis, Arizona State University, USA.

He, Y (2006) Earthquake loss and risk estimation of buildings by Monte Carlo simulation. PhD thesis, Columbia University, USA.

Hegazy, T and Ayed, A (1998) Neural network model for parametric cost estimation of highway projects. Journal of Construction Engineering and Management, 124(3), pp. 210-218. ISSN 0733-9364

Hegazy, T and Menesi, W (2008) Delay analysis under multiple baseline updates. Journal of Construction Engineering and Management, 134(8), pp. 575-582. ISSN 0733-9364

Hegazy, T and Saad, D A (2014) A microeconomic perspective on infrastructure rehabilitation. Construction Management and Economics, 32(5), pp. 433-445. ISSN 01446193

Hegazy, T; Zaneldin, E and Grierson, D (2001) Improving design coordination for building projects. I: Information model. Journal of Construction Engineering and Management, 127(4), pp. 322-329. ISSN 0733-9364

Hegazy, T and Zhang, K (2005) Daily windows delay analysis. Journal of Construction Engineering and Management, 131(5), pp. 505-512. ISSN 0733-9364

Heidrich, O; Kamara, J; Maltese, S; Re Cecconi, F and Dejaco, M C (2017) A critical review of the developments in building adaptability. International Journal of Building Pathology and Adaptation, 35(4), pp. 284-303.

Helaly, H.; El-Rayes, K. and Ignacio, E. J. (2026) Multiobjective optimization for the planning of prefabricated bridge construction projects. Journal of Construction Engineering and Management, 152(8): 04026103, ISSN 0733-9364

Hemström, K; Gustavsson, L and Mahapatra, K (2017) The sociotechnical regime and Swedish contractor perceptions of structural frames. Construction Management and Economics, 35(4), pp. 184-195. ISSN 01446193

Henrique, V B and Uberti, M S (2024) Characterization of parcels by remote sensing techniques. International Journal of Building Pathology and Adaptation, 42(2), pp. 278-293. ISSN 23984708

Heravi, M Y; Jang, Y and Chauhan, H (2025) Comparative analysis of deep-learning approaches for automatic recognition of awkward postures in construction environments through wrist-worn biosensors. Journal of Construction Engineering and Management, 151(8): 04025108, ISSN 0733-9364

Hermann, U H; Hasan, S; Al-Hussein, M and Bouferguene, A (2011) Innovative system for off-the-ground rotation of long objects using mobile cranes. Journal of Construction Engineering and Management, 137(7), pp. 478-485. ISSN 0733-9364

Hewavitharana, S; Perera, A; Perera, S; Perera, P and Nanayakkara, S (2025) Framework for systematic adoption of ERP systems in the Sri Lankan construction industry. Built Environment Project and Asset Management, 15(3), pp. 629-646. ISSN 2044-124X

Hidalgo-Sánchez, F M; Torres-González, M; Mascort-Albea, E J; Canivell, J; Romero-Hernández, R and Martín-del-Río, J J (2023) NDT spatial data integration for monumental buildings: Technical information management for the royal alcazar of seville. Building Research & Information, 51(6), pp. 625-647. ISSN 0961-3218

Hildreth, J C (2003) The use of short-interval GPS data in construction operations analysis. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Himpe, E; Trappers, L; Debacker, W; Delghust, M; Laverge, J; Janssens, A; Moens, J and Van Holm, M (2013) Life cycle energy analysis of a zero-energy house. Building Research & Information, 41(4), pp. 435-449. ISSN 0961-3218

Hjelseth, E (2010) Exchange of relevant information in BIM objects defined by the role-and life-cycle information model. Architectural Engineering and Design Management, 6(4), pp. 279-287. ISSN 1745-2007

Hobart, C; Thomson, D; Dainty, A; Fernie, S and Drewniak, D (2015) Closing the energy performance gap in zero carbon homes – pro-active identification, prioritisation and mitigation of causes using fmea. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hofman, E; Voordijk, H and Halman, J (2009) Matching supply networks to a modular product architecture in the house-building industry. Building Research & Information, 37(1), pp. 31-42. ISSN 0961-3218

Hong, T (2005) Life-cycle cost assessment model of composite materials in construction. PhD thesis, Purdue University, USA.

Hong, W T; Abdul-Rahman, H and Wang, C (2016) The application of Form Fchool Feng Shui model in a sleep environment: Human preferences and subjective sleep quality evaluation. Architectural Engineering and Design Management, 12(6), pp. 442-459. ISSN 1745-2007

Hsiao, W T; Yu, W D and Shih, C C (2026) Proactive construction hazard prevention model using machine learning. Journal of Construction Engineering and Management, 152(2): 04025261, ISSN 0733-9364

Hsie, M (1994) Computer-aided acceptance planning: Generating quality acceptance parameters and stratified sampling plans through neural network learning ability and CAD modeling. PhD thesis, Purdue University, USA.

Hsu, C L; Wang, J T and Huang, Y H (2023) A functional element-naming approach for BIM elements in building envelope systems. Journal of Construction Engineering and Management, 149(6): 04023035, ISSN 0733-9364

Hsu, P-Y (2019) Optimal logistics for modular construction. PhD thesis, Imperial College London, UK.

Hu, M (2020) Life-cycle environmental assessment of energy-retrofit strategies on a campus scale. Building Research & Information, 48(6), pp. 659-680. ISSN 0961-3218

Hu, M; Nippala, E; Kallioharju, K and Pelsmakers, S (2022) Monte Carlo simulation approach to understand the cost variance for energy retrofit projects: Comparative study of Finland and the United States. Construction Management and Economics, 40(3), pp. 207-222. ISSN 01446193

Hu, X and Liu, C (2017) Slacks-based data envelopment analysis for eco-efficiency assessment in the Australian construction industry. Construction Management and Economics, 35(11-12), pp. 693-706. ISSN 01446193

Hu, Xiancun (2015) Construction industry performance measurement with carbon reduction. PhD thesis, Deakin University, Australia.

Hu, Xiaoqiang (2023) New approaches to improving highway design, safety, and visual presentation. PhD thesis, Purdue University, USA.

Huang, L and Cao, Y (2025) A study on factors influencing the spatial oppressiveness in small courtyard spaces within university residential areas. Architectural Engineering and Design Management, 21(4), pp. 589-602. ISSN 1745-2007

Huchuk, B; Gunay, H B; O'Brien, W and Cruickshank, C A (2016) Model-based predictive control of office window shades. Building Research & Information, 44(4), pp. 445-455. ISSN 0961-3218

Hughes, P M (1990) Buildings and the building trade in Worcester 1540-1650. PhD thesis, University of Birmingham, UK.

Huuhka, S (2016) Vacant residential buildings as potential reserves: A geographical and statistical study. Building Research & Information, 44(8), pp. 816-839. ISSN 0961-3218

Hwang, S; Park, M; Lee, H S and Kim, H (2012) Automated time-series cost forecasting system for construction materials. Journal of Construction Engineering and Management, 138(11), pp. 1259-1269. ISSN 0733-9364

Hyde, R (2023) An investigation into the relationship between technical design, fabrication process and material development for the production of thin, lightweight, high-performance concrete cladding components for the construction of beautiful, durable and resilient building envelopes. PhD thesis, Queen's University Belfast, UK.

Höök, M; Stehn, L and Brege, S (2015) The development of a portfolio of business models: A longitudinal case study of a building material company. Construction Management and Economics, 33(5-6), pp. 334-348. ISSN 01446193

Hübner, D.; Moghayedi, A. and Michell, K. (2026) Affordable net-zero carbon housing in the Global South: Pathways towards a resilient built environment. Built Environment Project and Asset Management, pp. 1-18. ISSN 2044-124X

Ibbs, C W and Terveer, K R (1984) Integrated construction preventive maintenance system. Journal of Construction Engineering and Management, 110(1), pp. 43-59. ISSN 0733-9364

Ibbs, W and Nguyen, L D (2007) Alternative for quantifying field-overhead damages. Journal of Construction Engineering and Management, 133(10), pp. 736-742. ISSN 0733-9364

Ibbs, W and Nguyen, L D (2007) Schedule analysis under the effect of resource allocation. Journal of Construction Engineering and Management, 133(2), pp. 131-138. ISSN 0733-9364

Ibraheem, Y; Piroozfar, P A E; Farr, E R P and Ravenscroft, N (2020) Methodological evaluation of integrated façade systems: Sensitivity analysis of net energy in a base-case model. International Journal of Building Pathology and Adaptation, 38(1), pp. 107-126. ISSN 23984708

Ibrahim, M (2016) Analyzing decision making in alternative contracting for highway pavement rehabilitation projects. PhD thesis, Florida International University, USA.

Ibrahim, Y M; Kaka, A P; Aouad, G and Kagioglou, M (2008) As-built documentation of construction sequence by integrating virtual reality with time-lapse movies. Architectural Engineering and Design Management, 4(2), pp. 73-84. ISSN 1745-2007

Ibrahim Mahmoud, M M (2005) An xml initiative of transferring architectural information to the construction site based on the BIM object concept. PhD thesis, Illinois Institute of Technology, USA.

Ignacio, J T S; Gotangco Gonzales, C K and Lee-Chua, Q (2024) A systems thinking approach to e-learning on climate change: Capacity-building for junior high school teachers in the Philippines. International Journal of Disaster Resilience in the Built Environment, 15(3), pp. 409-424. ISSN 1759-5916

Iliescu, S (2000) A case-based reasoning approach to the designing of building envelopes. PhD thesis, Concordia University, Canada.

Imu, N J; Ezeamama, A and Matemilola, S (2022) Assessment of energy and emissions saving impact of solar PV modules: A case study of Bangladesh. International Journal of Building Pathology and Adaptation, 40(4), pp. 608-621. ISSN 23984708

Innella, F; Arashpour, M and Bai, Y (2019) Lean methodologies and techniques for modular construction: Chronological and critical review. Journal of Construction Engineering and Management, 145(12): 04019076, ISSN 0733-9364

Innella, Filomena (2020) Performance of building modules production and transportation. PhD thesis, Monash University, Australia.

Ioannou, P. G. and Liu, L. Y. (1993) Advanced construction technology system: Acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Ioannou, P G and Liu, L Y (1993) Advanced construction technology system: acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Iroham, C O; Misra, S; Emebo, O C and Okagbue, H I (2023) Predictive rental values model for low-income earners in slums: The case of Ijora, Nigeria. International Journal of Construction Management, 23(8), pp. 1426-1435. ISSN 1562-3599

Isiadianso, C (2007) Integrating deconstruction into the project delivery process. PhD thesis, Loughborough University, UK.

Ison, S; Dainty, A and Wall, S (2004) The construction sector, congestion charging and exemptions. Engineering, Construction and Architectural Management, 11(6), pp. 386-394. ISSN 0969-9988

Jackson, S (2002) Development of a tool for whole life design appraisal. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Jadallah, H (2021) Educational theory-embedded training for construction industry professionals. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Jafari, A and Akhavian, R (2019) Driving forces for the US residential housing price: A predictive analysis. Built Environment Project and Asset Management, 9(4), pp. 515-529. ISSN 2044-124X

Jalali, S; Aliabadi, M and Mahdavinejad, M (2022) Learning from plants: A new framework to approach water-harvesting design concepts. International Journal of Building Pathology and Adaptation, 40(3), pp. 405-421. ISSN 23984708

Jalilzadehazhari, E; Johansson, J and Mahapatra, K (2019) Applying a decision-making framework for resolving conflicts when selecting windows and blinds. Architectural Engineering and Design Management, 15(5), pp. 382-401. ISSN 1745-2007

Jalilzadehazhari, E; Johansson, P; Johansson, J and Mahapatra, K (2017) Application of analytical hierarchy process for selecting an interior window blind. Architectural Engineering and Design Management, 13(4), pp. 308-324. ISSN 1745-2007

Jalilzadehazhari, E; Johansson, P; Johansson, J and Mahapatra, K (2019) Developing a decision-making framework for resolving conflicts when selecting windows and blinds. Architectural Engineering and Design Management, 15(5), pp. 357-381. ISSN 1745-2007

Jansen, B (2024) The circular kitchen: Perspectives for design and implementation. PhD thesis, Delft University of Technology, Netherlands.

Jarkas, A M (2010) Buildability factors influencing micro-level formwork labour productivity of slab panels in building floors. Architectural Engineering and Design Management, 6(3), pp. 161-174. ISSN 1745-2007

Jarkas, A M (2010) Critical investigation into the applicability of the learning curve theory to rebar fixing labor productivity. Journal of Construction Engineering and Management, 136(12), pp. 1279-1288. ISSN 0733-9364

Jarkas, A M (2011) Buildability factors that influence micro-level formwork labour productivity of beams in building floors. Journal of Construction in Developing Countries, 16(1), pp. 1-18. ISSN 1823-6499

Jarkas, A M (2016) Effect of buildability on labor productivity: A practical quantification approach. Journal of Construction Engineering and Management, 142(2): 06015002, ISSN 0733-9364

Jarkas, A M (2017) Beamless or beam-supported building floors: Is buildability knowledge the missing link to improving productivity? Engineering, Construction and Architectural Management, 24(3), pp. 537-552. ISSN 0969-9988

Jarkas, A M and Horner, R M W (2011) Revisiting the applicability of learning curve theory to formwork labour productivity. Construction Management and Economics, 29(5), pp. 483-493. ISSN 1466433X

Javed, S; Ørnes, I R; Myrup, M and Dokka, T H (2019) Design optimization of the borehole system for a plus-energy kindergarten in Oslo, Norway. Architectural Engineering and Design Management, 15(3), pp. 181-195. ISSN 1745-2007

Jayawardane, A K; Price, A D and Harris, F C (1995) Measurement of brickwork and blockwork productivity: Part A: Productivity of operations can be improved by accurate estimating, good planning, optimum use of resources and having a sound knowledge of the productivity variables. Building Research & Information, 23(2), pp. 81-86. ISSN 0961-3218

Jegard, L.; Castaño-Rosa, R. and Pelsmakers, S. (2026) Impact of glazed balcony design on daylight in Finnish apartments. Buildings & Cities, 7(1), pp. 576-596. ISSN 2632-6655

Jegard, L; Castaño-Rosa, R; Kilpeläinen, S and Pelsmakers, S (2024) Finnish glazed balconies: Residents’ experience, wellbeing and use. Buildings & Cities, 5(1), pp. 540-561. ISSN 2632-6655

Jegede, O E and Taki, A (2022) Optimization of building envelopes using indigenous materials to achieve thermal comfort and affordable housing in Abuja, Nigeria. International Journal of Building Pathology and Adaptation, 40(2), pp. 219-247. ISSN 23984708

Jensen, E and Koch, C (2003) Making large infrastructure projects safe: The case of the Copenhagen Metro. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Jeon, J; Lee, J and Ham, Y (2019) Quantifying the impact of building envelope condition on energy use. Building Research & Information, 47(4), pp. 404-420. ISSN 0961-3218

Jesumoroti, C; Olanrewaju, A and Khor, S C (2024) Defects in Malaysian hospital buildings. International Journal of Building Pathology and Adaptation, 42(5), pp. 835-856. ISSN 2398-4708

Jia, A. Y. and Luk, C. W. (2026) From techno-optimism to value co-creation: A circular value system analysis on the modular transitional housing programme in Hong Kong. Construction Management and Economics, 44(7), pp. 537-563. ISSN 0144-6193

Jiang, J (2026) Reconstruction in post-war Rome: Transnational flows and national identity. Buildings & Cities, 7(1), pp. 215-231. ISSN 2632-6655

Jiang, S; Wang, S; Sun, H; Liu, W; Xiao, B; Cha, H S and Zhang, J (2025) Enhancing quality management: Lightweight detection and risk warning of concrete cracks and rebar exposure using improved YOLOv8. Journal of Construction Engineering and Management, 151(8): 04025087, ISSN 0733-9364

Jiang, W; Ding, L and Zhou, C (2021) Cyber physical system for safety management in smart construction site. Engineering, Construction and Architectural Management, 28(3), pp. 788-808. ISSN 0969-9988

Johnsson, H and Meiling, J H (2009) Defects in offsite construction: Timber module prefabrication. Construction Management and Economics, 27(7), pp. 667-681. ISSN 1466433X

Johnsson H, J G J P (2013) Modularization in a housing platform for mass customization. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Johnston, D; Wingfield, J and Miles-Shenton, D (2010) Measuring the fabric performance of UK dwellings. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Johnston, D W; Ahluwalia, N T and Gwyn, M B (2007) Improving the professional engineering licensure process for construction engineers. Journal of Construction Engineering and Management, 133(9), pp. 669-677. ISSN 0733-9364

Jordan, M R C (2005) The design, use and implementation of maintenance management systems and pavement management systems for whole life costing. Unpublished PhD thesis, Curtin University of Technology, Australia.

Jrade, A (2004) Integrated conceptual cost estimating and life cycle costing system for building projects. PhD thesis, Concordia University, Canada.

Jun, D H (2010) Multi-objective optimization for resource driven scheduling in construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Jun, D H and El-Rayes, K (2011) Multiobjective optimization of resource leveling and allocation during construction scheduling. Journal of Construction Engineering and Management, 137(12), pp. 1080-1088. ISSN 0733-9364

Järvelä, H; Lehto, A; Pirilä, T and Kuittinen, M (2025) Metrics for building component disassembly potential: A practical framework. Buildings & Cities, 6(1), pp. 634-653. ISSN 2632-6655

Kabundu, E K (2020) A housing affordability and tenure of choice quantum deliverable model in South Africa. PhD thesis, Nelson Mandela Metropolitan University, South Africa.

Kadry, M; Osman, H and Georgy, M (2017) Causes of construction delays in countries with high geopolitical risks. Journal of Construction Engineering and Management, 143(2): 04016095, ISSN 0733-9364

Kagan, Paula Brumer Franceschini (2024) Occupant behaviour modelling for building performance simulation of naturally ventilated school classrooms. PhD thesis, Universidade Estadual de Campinas, Brazil.

Kahkonen, K (2015) Role and nature of systemic innovations in construction and real estate sector. Construction Innovation, 15(2), pp. 130-133. ISSN 1471-4175

Kaka, A P (2001) Turnover forecasting for contracting companies based on published information. Journal of Financial Management of Property and Construction, 6(3), pp. 217-229. ISSN 1366-4387

Kaka, A P F (1990) Corporate financial model for construction contractors. PhD thesis, Loughborough University, UK.

Kalian, A A A (1998) Computer aided manufacturing for prefabricated concrete buildings. PhD thesis, Teesside University, UK.

Kalil, A J (2002) Use of a work sampling method (TVEA) to characterize determinants of particulate exposure in heavy and highway construction. DSc thesis, University of Massachusetts Lowell, USA.

Kalutara, P; Zhang, G; Setunge, S and Wakefield, R (2017) Factors that influence Australian community buildings' sustainable management. Engineering, Construction and Architectural Management, 24(1), pp. 94-117. ISSN 0969-9988

Kalutara, P; Zhang, G; Setunge, S and Wakefield, R (2023) Decision-making model for sustainable management of Australian community buildings: Combined approach using analytical hierarchy process and neuro-fuzzy system. International Journal of Construction Management, 23(8), pp. 1299-1310. ISSN 1562-3599

Kamel Hedayat Abad, M E (2017) Integration and interoperability of building envelope information and energy modeling. PhD thesis, Pennsylvania State University, USA.

Kandil, A and El-Rayes, K (2006) Parallel genetic algorithms for optimizing resource utilization in large-scale construction projects. Journal of Construction Engineering and Management, 132(5), pp. 491-498. ISSN 0733-9364

Kanellopoulos, G (2022) External fire spread from timber lined compartments. PhD thesis, University of Edinburgh, UK.

Kang, K; Xiao, J and Moon, S (2025) Evaluating safety risks in pedestrian facilities for different ride modes: Application of a deep learning-based 3D scanning system. Journal of Construction Engineering and Management, 151(11): 04025183, ISSN 0733-9364

Kang, Y-J (2000) Minimum life-cycle cost structural design against natural hazards. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kantianis, D D (2022) Design morphology complexity and conceptual building project cost forecasting. Journal of Financial Management of Property and Construction, 27(3), pp. 387-414. ISSN 1366-4387

Karunaratne, Roshan (2022) Optimisation of prefabricated modular-integrated residential construction using hybrid customisation methods. PhD thesis, University of Melbourne, Australia.

Kashiwagi, D T (1991) Development of a performance based design/procurement system for nonstructural facility systems. PhD thesis, Arizona State University, USA.

Kawecki, L R (2010) Environmental performance of modular fabrication: Calculating the carbon footprint of energy used in the construction of a modular home. PhD thesis, Arizona State University, USA.

Keath, M (1983) The development of school construction systems in Hertfordshire 1946-64. PhD thesis, University of Greenwich, UK.

Keles, C and Yazicioglu, F (2023) Analyzing the environmental sustainability of primary schools' facades within the scope of life cycle assessment in Turkey and recommendations for improvement. Smart and Sustainable Built Environment, 12(2), pp. 298-324. ISSN 2046-6099

Kennington, J (1993) Development of an integrated HVAC design environment. PhD thesis, University College, Galway, Ireland.

Kerali, A G and Thomas, T H (2002) Effect of mix retention and curing on low-cement walling blocks. Building Research & Information, 30(5), pp. 362-366. ISSN 0961-3218

Khajehzadeh, I and Vale, B (2017) How house size impacts type, combination and size of rooms: A floor plan study of New Zealand houses. Architectural Engineering and Design Management, 13(4), pp. 291-307. ISSN 1745-2007

Khajuria, A (1994) Quality assurance of concrete using a hybrid knowledge-based expert system. PhD thesis, Rutgers State University of New Jersey, School of Graduate Studies, USA.

Khalife, Salam (2023) Developing advanced approaches to deliver value on construction projects: Integrating social dynamics, digital modelling techniques, and lean concepts. PhD thesis, University of Alberta, Canada.

Khalili, A and Chua, D K (2014) Integrated prefabrication configuration and component grouping for resource optimization of precast production. Journal of Construction Engineering and Management, 140(2): 04013052, ISSN 0733-9364

Khosrowshahi, F (1989) A new mathematically based model for forecasting construction project expenditure pattern. PhD thesis, South Bank Polytechnic, UK.

Khosrowshahi, F (2001) Project cash flow forecasting: A mathematical approach. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Khosrowshahi, F and Alani, M (2003) Event and effect model of building maintenance. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Kibwami, N and Tutesigensi, A (2015) Extending the clean development mechanism concept to building projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Kiliccote, H (1997) A standards processing framework. PhD thesis, Carnegie Mellon University, USA.

Kim, C; Kim, H; Ryu, J and Kim, C (2011) Ubiquitous sensor network for construction material monitoring. Journal of Construction Engineering and Management, 137(2), pp. 158-165. ISSN 0733-9364

Kim, C S and Liu, L Y (2007) Cost information model for managing multiple projects. Journal of Construction Engineering and Management, 133(12), pp. 966-974. ISSN 0733-9364

Kim, D and Xiong, S (2025) Enhancing worker safety: Real-time automated detection of personal protective equipment to prevent falls from heights at construction sites using improved yolov8 and edge devices. Journal of Construction Engineering and Management, 151(1): 04024187, ISSN 0733-9364

Kim, I (1994) Data representations in an integrated architectural design environment: Unified data organisation and management. PhD thesis, University of Strathclyde, UK.

Kim, Jungsoo (2014) Impact of indoor environmental quality (IEQ) factors on occupant evaluation of workspaces. PhD thesis, University of Sydney, Australia.

Kim, K; Jeong, I and Cho, Y K (2023) Signal processing and alert logic evaluation for IoT-based work zone proximity safety system. Journal of Construction Engineering and Management, 149(2): 05022018, ISSN 0733-9364

Kim, K J (1997) Simplified discrete event simulation for heavy construction operations. PhD thesis, University of Texas at Austin, USA.

Kim, M P and Adams, K (1989) An expert system for construction contract claims. Construction Management and Economics, 7(3), pp. 249-262. ISSN 01446193

Kim, S (1990) Development of risk assessment decision support system for hazardous materials movement. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Kindangen, J I (1996) Artificial neural networks and naturally ventilated buildings. Building Research & Information, 24(4), pp. 203-208. ISSN 0961-3218

Kindangen, J I (1997) Window and roof configurations for comfort ventilation. Building Research & Information, 25(4), pp. 218-225. ISSN 0961-3218

King, F (2016) Visual approaches to property law pedagogy. International Journal of Law in the Built Environment, 8(1), pp. 80-94. ISSN 1756-1450

Kishk, M; Al-Hajj, A; Pollock, R and Aouad, G F (2003) Effective feedback of whole-life data to the design process. Journal of Financial Management of Property and Construction, 8(2), pp. 89-98. ISSN 1366-4387

Kisilewicz, T (2007) Computer simulation in solar architecture design. Architectural Engineering and Design Management, 3(2), pp. 106-123. ISSN 1745-2007

Kiwan, M S A A (1994) Integration of building design and construction information: A neutral object-oriented model. PhD thesis, University of Dundee, UK.

Knerr, D G (1996) "The house America has been waiting for": The Lustron Experiment in factory-made housing, 1946-1954. PhD thesis, University of Cincinnati, USA.

Ko, W H (2021) View and environmental quality in buildings. PhD thesis, University of California, Berkeley, USA.

Koc, K and Okudan, O (2021) Assessment of life cycle risks of deconstruction in urban regeneration projects. Journal of Construction Engineering and Management, 147(10): 04021137, ISSN 0733-9364

Koch, C and Beemsterboer, S (2017) Making an engine: Performativities of building information standards. Building Research & Information, 45(6), pp. 596-609. ISSN 0961-3218

Koch, C and Larsen, A (2018) Performance of retrofit with ICT of social housing: Proving technology optimists wrong? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Kohansal, M E; Akaf, H R; Gholami, J and Moshari, S (2022) Investigating the simultaneous effects of building orientation and thermal insulation on heating and cooling loads in different climate zones. Architectural Engineering and Design Management, 18(4), pp. 410-433. ISSN 1745-2007

Kolawole, O M (2023) A model for improving ethics in construction materials and products supply chain using blockchain. PhD thesis, London South Bank University, UK.

Kolokotroni, M; Robinson-Gayle, S; Tanno, S and Cripps, A (2004) Environmental impact analysis for typical office facades. Building Research & Information, 32(1), pp. 2-16. ISSN 0961-3218

Koo, K-J (2000) Organizational program management for multiple maintenance projects under multi-trade capacity constraints. PhD thesis, University of Wisconsin - Madison, USA.

Koranteng, C; Simons, B; Abrokwa Gyimah, K and Nkrumah, J (2023) Ghana's green building assessment journey: An appraisal of the thermal performance of an office building in Accra. Journal of Engineering, Design and Technology, 21(1), pp. 188-205. ISSN 1726-0531

Koranteng, C; Simons, B and Essel, C (2019) Climate responsive buildings: A comfort assessment of buildings on KNUST campus, Kumasi. Journal of Engineering, Design and Technology, 17(5), pp. 862-877. ISSN 1726-0531

Kose, I. and Gumusburun Ayalp, G. (2026) Transformative impacts of technological developments on architectural education: A holistic scientometric analysis. Engineering, Construction and Architectural Management, 33(5), pp. 3542-3575. ISSN 0969-9988

Kourkoulis, S K; Pasiou, E D; Markides, C F; Loukidis, A; Stavrakas, I and Triantis, D (2024) The determination of mode-I fracture toughness (by means of the Brazilian disc configuration) in the light of data provided by the 3D digital image correlation technique. International Journal of Building Pathology and Adaptation, 42(1), pp. 175-192. ISSN 23984708

Kpamma, Z E; Adjei-Kumi, T; Ayarkwa, J and Adinyira, E (2016) An exploration of the choosing by advantages decision system as a user engagement tool in participatory design. Architectural Engineering and Design Management, 12(1), pp. 51-66. ISSN 1745-2007

Kriklenko, E (2020) Complex bending-active structures from continuous flexible planar sheets or a hybrid structure introducing the use of spacer fabrics. Architectural Engineering and Design Management, 17(3-4), pp. 1-22. ISSN 1745-2007

Krych, K; Heeren, N and Hertwich, E G (2021) Factors influencing the life-cycle GHG emissions of Brazilian office buildings. Buildings & Cities, 2(1), pp. 856-873. ISSN 2632-6655

Krystallis I, D P P A D F (2013) Supporting future-proof healthcare design by narrowing the design space of solutions using building information modelling. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Kumar, V (2019) Developing COBie dataset management system (CDMS) to enhance usability of building information model-facilities management information exchange standard. PhD thesis, National University of Singapore, Singapore.

Kumaraswamy, M M (1991) Evaluating the management of construction projects. PhD thesis, Loughborough University, UK.

Kumaraswamy, M M; Nadarajah, R; Palaneeswaran, E and Rahman, M M (2001) Dealing with delays in evaluating extensions of time. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Kurniawan, F (2013) An integrated project evaluation tool for public-private partnership projects. PhD thesis, Heriot-Watt University, UK.

Kwon, N; Park, M; Lee, H S; Ahn, J and Shin, M (2016) Construction noise management using active noise control techniques. Journal of Construction Engineering and Management, 142(7): 4016014, ISSN 0733-9364

Kölsch, P (2019) Hygrothermal simulation of cathedral ceiling roofs with ventilated roofing tiles. International Journal of Building Pathology and Adaptation, 37(4), pp. 473-487. ISSN 23984708

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Laar, M and Grimme, F W (2002) German developments in daylight guidance systems: An overview. Building Research & Information, 30(4), pp. 282-301. ISSN 0961-3218

Lai, C M and Chiang, C M (2006) How phase change materials affect thermal performance: Hollow bricks. Building Research & Information, 34(2), pp. 118-130. ISSN 0961-3218

Lambers, R; Cheung, F and Skitmore, M (2024) Risk management strategies for common residential construction defects: The case of Queensland, Australia. International Journal of Construction Management, 24(10), pp. 1126-1135. ISSN 1562-3599

Lambropoulos, S; Manolopoulos, N and Pantouvakis, J P (1996) Semantic: Smart earthmoving analysis and estimation of cost. Construction Management and Economics, 14(2), pp. 79-92. ISSN 01446193

Lang, R; Goodier, C and Glass, J (2016) Are housebuilders' production strategies a barrier to offsite construction uptake in the UK? In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Laovisutthichai, V; Lu, W and Low, S P (2025) Design for excellence (DfX) for high-rise modular buildings: from DfX considerations to module design guidelines using the case of Hong Kong. Architectural Engineering and Design Management, 21(3), pp. 430-449. ISSN 1745-2007

Lashgari, Martin (2014) Comparative study of base-isolated and fixed-base buildings using a damage/cost approach. PhD thesis, University of Nebraska - Lincoln, USA.

Lavy, S; Kiss, C W and Fernandez-Solis, J L (2015) Linking design and energy performance in U.S. Military hospitals. Architectural Engineering and Design Management, 11(1), pp. 41-64. ISSN 1745-2007

Lavy, S and Shohet, I M (2007) On the effect of service life conditions on the maintenance costs of healthcare facilities. Construction Management and Economics, 25(10), pp. 1087-1098. ISSN 1466433X

Le Gia, T T; Dang, H A; Dinh, V B; Tong, M Q; Nguyen, T K; Nguyen, H H and Nguyen, D Q (2022) A simulation-based multi-objective genetic optimization framework for efficient building design in early stages: Application for Vietnam's hot and humid climates. International Journal of Building Pathology and Adaptation, 40(3), pp. 305-326. ISSN 23984708

Leder, S; Newsham, G R; Veitch, J A; Mancini, S and Charles, K E (2016) Effects of office environment on employee satisfaction: A new analysis. Building Research & Information, 44(1), pp. 34-50. ISSN 0961-3218

Lee, J; Jang, K; Sparkling, A E and Kang, K (2026) Large language model-based construction site management for severe weather preparedness. Journal of Construction Engineering and Management, 152(1): 04025220, ISSN 0733-9364

Lee, C; Hong, T; Lee, G and Jeong, J (2012) Life-cycle cost analysis on glass type of high-rise buildings for increasing energy efficiency and reducing CO2 emissions in Korea. Journal of Construction Engineering and Management, 138(7), pp. 897-904. ISSN 0733-9364

Lee, D; Wen, L; Choi, J O and Lee, S (2023) Sensor-integrated hybrid blockchain system for supply chain coordination in volumetric modular construction. Journal of Construction Engineering and Management, 149(1): 04022147, ISSN 0733-9364

Lee, E B; Roesler, J; Harvey, J T and Ibbs, C W (2002) Case study of urban concrete pavement reconstruction on Interstate 10. Journal of Construction Engineering and Management, 128(1), pp. 49-56. ISSN 0733-9364

Lee, G (2004) A new formal and analytical process to product modeling (PPM) method and its application to the precast concrete industry. PhD thesis, Georgia Institute of Technology, USA.

Lee, I; Roppel, P; Lawton, M and Ferreira, P (2019) Design limits for framed wall assemblies dependent on material choices for sheathing membranes and exterior insulation. International Journal of Building Pathology and Adaptation, 37(4), pp. 426-447. ISSN 23984708

Lee, J H (2004) Object-based learning method in civil engineering. PhD thesis, Purdue University, USA.

Lee, J M (2010) Automated checking of building requirements on circulation over a range of design phases. PhD thesis, Georgia Institute of Technology, USA.

Lee, J M; Anumba, C J; Gibb, A G and Agbasi, E (2002) The current status of the cladding sector and its opportunities for computer-integrated manufacture (CIM). In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Lee, J-R (1997) The object-oriented project system for pavement construction management and visualization. PhD thesis, Ohio State University, USA.

Lee, Jaeho (2007) A methodology for developing bridge condition rating models based on limited inspection records. PhD thesis, Griffith University, Australia.

Lei, Z; Han, S; Bouferguène, A; Taghaddos, H; Hermann, U and Al-Hussein, M (2015) Algorithm for mobile crane walking path planning in congested industrial plants. Journal of Construction Engineering and Management, 141(2): 05014016, ISSN 0733-9364

Lei, Z; Taghaddos, H; Olearczyk, J; Al-Hussein, M and Hermann, U (2013) Automated method for checking crane paths for heavy lifts in industrial projects. Journal of Construction Engineering and Management, 139(10): 04013011, ISSN 0733-9364

Lei, Zhen (2015) Automated simulation model for crane motion planning in heavy industrial projects. PhD thesis, University of Alberta, Canada.

Lensgraf, S E (2024) Towards scalable autonomous underwater construction with free-floating robots. PhD thesis, Dartmouth College, USA.

Li, F.; Chi, H. L.; Li, R.; Zou, Z. and Wang, R. D. (2026) Two-stage optimization design framework for tower crane layout planning in modular integrated construction considering transportation efficiency, operator visibility, and lifting safety. Journal of Construction Engineering and Management, 152(6): 04026080, ISSN 0733-9364

Li, F; Xu, X; Zhou, J; Chen, J and Zhou, S (2026) Automatic generation of inspection knowledge for highway construction via the integration of computer vision and ontology reasoning. Engineering, Construction and Architectural Management, 33(1), pp. 73-97. ISSN 0969-9988

Li, L; Cui, X; Wang, J; Jin, H and Xu, H (2026) Automated tracking of worker and heavy equipment on tunnel construction sites: Deep-learning framework. Journal of Construction Engineering and Management, 152(2): 04025237, ISSN 0733-9364

Li, S; Lin, J; Lin, W; Zheng, J; Tu, Y and Zheng, J (2026) A new energy-saving block and invisible multiribbed frame structure. Construction Innovation, 26(2), pp. 313-327. ISSN 1471-4175

Li, T.; Ling, F. Y. Y.; Li, Z.; Dou, Y. and Guo, Z. (2026) Portfolio optimization of prefabricated interior building component systems: A multistakeholder perspective. Journal of Construction Engineering and Management, 152(9): 04026154, ISSN 0733-9364

Li, Y.; Tai, S. and Tai, Z. (2024) Development of ANP-based greenness evaluation model of construction technologies in China. Journal of Engineering, Design and Technology, 24(2), pp. 602-630. ISSN 1726-0531

Li, F G N; Smith, A Z P; Biddulph, P; Hamilton, I G; Lowe, R; Mavrogianni, A; Oikonomou, E; Raslan, R; Stamp, S; Stone, A; Summerfield, A J; Veitch, D; Gori, V and Oreszczyn, T (2015) Solid-wall U-values: Heat flux measurements compared with standard assumptions. Building Research & Information, 43(2), pp. 238-252. ISSN 0961-3218

Li, H; Chan, N K Y and Skitmore, M (2012) The use of virtual prototyping to rehearse the sequence of construction work involving mobile cranes. Construction Innovation, 12(4), pp. 429-446. ISSN 1471-4175

Li, P; Tang, Y; Zheng, Z; Wang, Z and Zhuang, Y (2024) Semiautomated railway line information modeling based on asset management data. Journal of Construction Engineering and Management, 150(10): 04024130, ISSN 0733-9364

Li, Q (2009) Energy efficiency design of residential buildings in North China cities. PhD thesis, Cardiff University, UK.

Li, W; Zhang, Y; Lu, D and Augenbroe, G (2020) Quantification methods of natural ventilated building performance in preliminary design. Building Research & Information, 48(4), pp. 401-414. ISSN 0961-3218

Li, X and Sunikka-Blank, M (2021) Urban densification and social capital: Neighbourhood restructuring in jinan, China. Buildings & Cities, 2(1), pp. 244-263. ISSN 2632-6655

Liang, J S (2023) A knowledge with ontology representation for product life cycle to support eco-design activities. Journal of Engineering, Design and Technology, 21(4), pp. 991-1026. ISSN 1726-0531

Liang Wong, I; Eames, P and Perera, S (2012) Energy simulations of a transparent-insulated office façade retrofit in London, UK. Smart and Sustainable Built Environment, 1(3), pp. 253-276. ISSN 2046-6099

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Lin, F.; Cheng, Y. and Zhang, J. (2026) Efficient rebar layout estimation enabled by a custom detection network and enhanced visual measurement. Journal of Construction Engineering and Management, 152(9): 04026152, ISSN 0733-9364

Lin, L-k (1994) Improving the productivity of roadway construction job sites with a portable expert system. PhD thesis, University of Utah, USA.

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Lippiatt, B C (1999) Selecting cost-effective green building products: Bees approach. Journal of Construction Engineering and Management, 125(6), pp. 448-455. ISSN 0733-9364

Lisø, K R; Hygen, H O; Kvande, T and Thue, J V (2006) Decay potential in wood structures using climate data. Building Research & Information, 34(6), pp. 546-551. ISSN 0961-3218

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Lisø, K R; Myhre, L; Kvande, T; Thue, J V and Nordvik, V (2007) A Norwegian perspective on buildings and climate change. Building Research & Information, 35(4), pp. 437-449. ISSN 0961-3218

Liu, J; Jiang, S; Sun, H; Liu, W and Xiao, B (2026) Quality inspection information extraction: Intelligent parsing of construction quality inspection specifications based on natural language processing. Journal of Construction Engineering and Management, 152(4): 04026027, ISSN 0733-9364

Liu, W.; Luo, X.; Feng, Z.; Liang, B. and Fan, G. (2026) Research on risk propagation mechanism and control strategy of prefabricated building supply chain: Based on complex network model and dynamic simulation analysis. Engineering, Construction and Architectural Management, 33(7), pp. 5901-5933. ISSN 0969-9988

Liu, Y.; Schmidt, S.; Li, H. and Cao, Y. (2026) A study on the moisture risk assessment path for exterior wall of existing residential building in Shanghai based on hygrothermal simulation analysis. Architectural Engineering and Design Management, 22(2), pp. 340-364. ISSN 1745-2007

Liu, C; M.E. Sepasgozar, S; Shirowzhan, S and Mohammadi, G (2022) Applications of object detection in modular construction based on a comparative evaluation of deep learning algorithms. Construction Innovation, 22(1), pp. 141-159. ISSN 1471-4175

Liu, Jing (2018) Dual-level resource-constrained multi-project scheduling framework for prefabrication in construction. PhD thesis, University of Alberta, Canada.

Liu, Y and Mohamed, Y (2012) Modelling industrial construction operations using a multi-agent resource allocation framework. Engineering, Construction and Architectural Management, 19(4), pp. 406-427. ISSN 0969-9988

Liu, Y; Zhao, J; Dimitrov, V; Irish, A; Jones, C; Kirk, S; Thomas, J and Welter, D (2010) An entertaining robot prototype for pets. Journal of Engineering, Design and Technology, 8(2), pp. 189-205. ISSN 1726-0531

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

Lomas, K J and Kane, T (2013) Summertime temperatures and thermal comfort in UK homes. Building Research & Information, 41(3), pp. 259-280. ISSN 0961-3218

London, K and Pablo, Z (2017) An actor-network theory approach to developing an expanded conceptualization of collaboration in industrialized building housing construction. Construction Management and Economics, 35(8-9), pp. 553-577. ISSN 0144-6193

Long, G (2010) A detailed investigation of the applicability and utility of simulation and gaming in the teaching of civil engineering students. PhD thesis, University of Nottingham, UK.

Lopes, J (2003) The relationship between construction outputs and GDP: Long-run trends from Portugal. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Lopez, J; Perry, L; Bhandari, S; Ayer, S K and Hallowell, M R (2026) Exploring the potential for safety training in VR to generate emotional engagement and situational interest among construction workers. Journal of Construction Engineering and Management, 152(3): 04025272, ISSN 0733-9364

Löffler, M (1997) Foamglass as spacer in multiple-glazing. Building Research & Information, 25(2), pp. 107-110. ISSN 0961-3218

Lützkendorf, T and Balouktsi, M (2022) Embodied carbon emissions in buildings: Explanations, interpretations, recommendations. Buildings & Cities, 3(1), pp. 964-973. ISSN 2632-6655

Ma, L.; Chen, C.; Zhou, W. and Wang, B. (2026) A real-time high-accuracy framework for small-scale ppe detection in complex construction environments. Journal of Construction Engineering and Management, 152(8): 04026107, ISSN 0733-9364

Ma, H; Zhang, H and Chang, P (2020) 4D-based workspace conflict detection in prefabricated building constructions. Journal of Construction Engineering and Management, 146(9): 04020112, ISSN 0733-9364

Ma, J; Jiang, X; Zheng, D; Liao, X; Lu, J and Zhao, Y (2024) Transwallnet: High-performance semantic segmentation of large-scale and multifeatured point clouds of building gables. Journal of Construction Engineering and Management, 150(8): 04024092, ISSN 0733-9364

Ma, J; Zhao, Y; Zheng, D; Liao, X and Lu, J (2025) CSADnet: Attention-based semantic segmentation method for spraying scene images of building gables. Journal of Construction Engineering and Management, 151(8): 04025109, ISSN 0733-9364

Ma, Z; Liu, W; Li, C; Sang, Y; Zhang, Y; Li, G and Xu, Y (2024) Research on energy-saving control strategy of loader based on intelligent identification of working stages. Journal of Construction Engineering and Management, 150(7): 04024075, ISSN 0733-9364

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: Lessons from a PoE case study. Building Research & Information, 33(1), pp. 17-31. ISSN 0961-3218

Madhlopa, A (2016) Effect of controlling airflow in a solar chimney on thermal load in a built environment. Journal of Engineering, Design and Technology, 14(2), pp. 286-309.

Maghrebi, M; Travis Waller, S and Sammut, C (2014) Assessing the accuracy of expert-based decisions in dispatching ready mixed concrete. Journal of Construction Engineering and Management, 140(6): 6014004, ISSN 0733-9364

Mahasuar, K (2023) COVID-19 and its impact on Indian construction industry: An event study approach. Construction Management and Economics, 41(5), pp. 428-444. ISSN 01446193

Mahdy, M M M (2014) Applying architecture simulation tools to assess building sustainable design: adapting the Egyptian residential energy code for climate change. PhD thesis, University of Kent, UK.

Maneschi, K and Melhado, S (2010) Scope of design for production of partition walls and facade coverings. Architectural Engineering and Design Management, 6(1), pp. 3-17. ISSN 1745-2007

Mangkuto, R A and Paramita, B (2022) Computation of the greenery-sky-view factor in daylit buildings. Architectural Engineering and Design Management, 18(6), pp. 850-869. ISSN 1745-2007

Manoharan, K; Dissanayake, P; Pathirana, C; Deegahawature, D and Silva, R (2024) A systematic evaluation on the competencies of construction supervisors in productivity and performance improvement practices: Sri Lankan perspective. Smart and Sustainable Built Environment, 13(4), pp. 960-988. ISSN 2046-6099

Manrique, J D; Al-Hussein, M; Telyas, A and Funston, G (2007) Constructing a complex precast tilt-up-panel structure utilizing an optimization model, 3D CAD, and animation. Journal of Construction Engineering and Management, 133(3), pp. 199-207. ISSN 0733-9364

Marchwiński, J and Kurtz-Orecka, K (2023) Effect of photovoltaic installation power and façade glazing ratio on the energy performance of a nursery building. Engineering, Construction and Architectural Management, 30(4), pp. 1463-1480. ISSN 0969-9988

Marenjak, S (2004) A generic approach to minimising whole life costs in the building industry. PhD thesis, University of Dundee, UK.

Marrana, T C; Silvestre, J D; De Brito, J and Gomes, R (2017) Lifecycle cost analysis of flat roofs of buildings. Journal of Construction Engineering and Management, 143(6): 04017014, ISSN 0733-9364

Marsh, R (2016) LCA profiles for building components: Strategies for the early design process. Building Research & Information, 44(4), pp. 358-375. ISSN 0961-3218

Marsh, R (2017) Building lifespan: Effect on the environmental impact of building components in a Danish perspective. Architectural Engineering and Design Management, 13(2), pp. 80-100. ISSN 1745-2007

Martabid, J E and Mourgues, C (2015) Criteria used for selecting envelope wall systems in Chilean residential projects. Journal of Construction Engineering and Management, 141(12): 05015011, ISSN 0733-9364

Marteinsson, B (2003) Durability and the factor method of ISO 15686-1. Building Research & Information, 31(6), pp. 416-426. ISSN 0961-3218

Martinez-Miranzo, D.; Rizo-Maestre, C.; Gomez-Donoso, F. and Cazorla, M. (2026) Mixed reality for construction house evaluation and quality assessing. Journal of Construction Engineering and Management, 152(10): 04026173, ISSN 0733-9364

Martins, R S; Siqueira de Aquino, G; Coelho Pagel, É and Gouveia, G L O D (2025) Realistic designs of windows and doors as solutions to improve natural ventilation in hot-humid climates: A factorial design approach. Architectural Engineering and Design Management, 21(2), pp. 268-288. ISSN 1745-2007

Martínez, A; Alonso, C; Martín-Consuegra, F; Pérez, G; Frutos, B and Gutiérrez, Á (2021) Experimental analysis of a prototype for a thermochromic trombe wall. Building Research & Information, 49(7), pp. 777-794. ISSN 0961-3218

Martínez-Rocamora, A; García-Alvarado, R; Casanova-Medina, E; González-Böhme, L F and Auat-Cheein, F (2020) Parametric programming of 3D printed curved walls for cost-efficient building design. Journal of Construction Engineering and Management, 146(5): 04020039, ISSN 0733-9364

Marzouk, M (2002) Optimizing earthmoving operations using computer simulation. PhD thesis, Concordia University, Canada.

Marzouk, M and Hamdala, D (2025) Phasing real estate projects considering profitability and customer satisfaction. Engineering, Construction and Architectural Management, 32(5), pp. 2942-2970. ISSN 0969-9988

Marzouk, M and Moamen, M (2009) A framework for estimating negotiation amounts in construction projects. Construction Innovation, 9(2), pp. 133-148. ISSN 1471-4175

Marzouk, M; Said, H and El-Said, M (2009) Framework for multiobjective optimization of launching girder bridges. Journal of Construction Engineering and Management, 135(8), pp. 791-800. ISSN 0733-9364

Mat Noor, Noorsidi Aizuddin (2014) Framework of whole life cycle costing for Malaysian high rise residential property development. PhD thesis, Queensland University of Technology, Australia.

Matar, M; Osman, H; Georgy, M; Abou-Zeid, A and Elsaid, M (2020) Evaluating the environmental performance of pipeline construction using systems modelling. Construction Management and Economics, 38(8), pp. 689-714. ISSN 01446193

Mathews, J D (2000) Optimisation and decision support during the conceptual stage of building design: New techniques based on the genetic algorithm. PhD thesis, University of Plymouth, UK.

Matipa, W M; Kelliher, D and Keane, M (2008) How a quantity surveyor can ease cost management at the design stage using a building product model. Construction Innovation, 8(3), pp. 164-181. ISSN 1471-4175

Matsebe, O; Mpofu, K; Agee, J T and Ayodeji, S P (2015) Corner features extraction: Underwater SLAM in structured environments. Journal of Engineering, Design and Technology, 13(4), pp. 556-569.

Mavrogianni, A; Pathan, A; Oikonomou, E; Biddulph, P; Symonds, P and Davies, M (2017) Inhabitant actions and summer overheating risk in London dwellings. Building Research & Information, 45(1-2), pp. 119-142. ISSN 0961-3218

Mayer, M (2020) Material recovery certification for construction workers. Buildings & Cities, 1(1), pp. 550-564. ISSN 2632-6655

Mazlan, E M; Osman, M H and Saud, M S (2019) The level of competency knowledge in safety training among construction personnel. Journal of Construction in Developing Countries, 24(2), pp. 157-172. ISSN 1823-6499

Mbabazi, A (2004) Quantification and analysis of construction claims. PhD thesis, University of Waterloo, Canada.

McAleenan, P (2016) A novel approach to health and safety in construction: culture, ethics reasoning and leadership. PhD thesis, University of South Wales, UK.

McEvoy, M and Southall, R (2010) A programme of testing to evaluate a passive approach to whole-house ventilation. Construction Innovation, 10(4), pp. 395-407. ISSN 1471-4175

McGill, G; Sharpe, T; Robertson, L; Gupta, R and Mawditt, I (2017) Meta-analysis of indoor temperatures in new-build housing. Building Research & Information, 45(1-2), pp. 19-39. ISSN 0961-3218

McLarnon, C; Spillane, J P; Bradley, J; McCartan, N and Nelson, M (2020) Open innovation within loughview timber: How knowledge transfer is opening doors to new markets. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

McWhirter, N and Shealy, T (2020) Case-based flipped classroom approach to teach sustainable infrastructure and decision-making. International Journal of Construction Education and Research, 16(1), pp. 3-23. ISSN 1557-8771

Meacham, B J (2022) Fire performance and regulatory considerations with modern methods of construction. Buildings & Cities, 3(1), pp. 464-487. ISSN 2632-6655

Mehany, M S H M (2014) Delay-caused claims in infrastructure projects under design-bid-build delivery systems. PhD thesis, Colorado State University, USA.

Mehdipoor, A; Iordanova, I and Al-Hussein, M (2025) Enhancing the manufacturing process in light-gauge steel off-site construction using semiautomation. Journal of Construction Engineering and Management, 151(6): 04025055, ISSN 0733-9364

Mehta, V and Thakur, M S (2025) Enhancing precision and efficiency in English bond brick masonry: Novel unified templates approach. Engineering, Construction and Architectural Management, 32(9), pp. 6325-6350. ISSN 0969-9988

Mei, X; Xu, F; Zhang, Z and Tao, Y (2025) Unsafe behavior identification on construction sites by combining computer vision and knowledge graph-based reasoning. Engineering, Construction and Architectural Management, 32(12), pp. 8360-8389. ISSN 0969-9988

Mei, X; Zhou, X; Xu, F and Zhang, Z (2023) Human intrusion detection in static hazardous areas at construction sites: Deep learning-based method. Journal of Construction Engineering and Management, 149(1): 04022142, ISSN 0733-9364

Meiling, J (2010) Continuous improvement and experience feedback in off-site construction timber-framed module prefabrication. PhD thesis, Luleå University of Technology, Sweden.

Meiling, J and Johnsson, H (2008) Feedback in industrialised housing: Why does it not happen? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Meiling, J and Sandberg, M (2009) Towards a feedback model for offsite construction. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Meiling, J H; Sandberg, M and Johnsson, H (2014) A study of a plan-do-check-act method used in less industrialized activities: Two cases from industrialized housebuilding. Construction Management and Economics, 32(1-2), pp. 109-125. ISSN 01446193

Meinke, A; Hawighorst, M; Wagner, A; Trojan, J and Schweiker, M (2017) Comfort-related feedforward information: Occupants' choice of cooling strategy and perceived comfort. Building Research & Information, 45(1-2), pp. 222-238. ISSN 0961-3218

Meir, I A; Schwartz, M; Davara, Y and Garb, Y (2019) A window of one's own: A public office post-occupancy evaluation. Building Research & Information, 47(4), pp. 437-452. ISSN 0961-3218

Memarzia, K (1995) Productivity and the Iranian building industry: a case study of component manufacture. PhD thesis, University of York, UK.

Menconi, M; Painting, N and Piroozfar, P (2024) An energy performance baseline scenario for 19thc listed dwellings in the UK. International Journal of Building Pathology and Adaptation, 42(1), pp. 133-152. ISSN 23984708

Meng, S (2023) Development of a regional wind risk assessment framework for wood-frame single-family residential building stock. PhD thesis, University of California, Los Angeles, USA.

Miglioranza, P; Scanu, A; Simionato, G; Sinigaglia, N and Califano, A (2024) Machine learning and engineering feature approaches to detect events perturbing the indoor microclimate in ringebu and heddal stave churches (Norway). International Journal of Building Pathology and Adaptation, 42(1), pp. 35-47. ISSN 23984708

Milberg, C T (2006) Application of tolerance management to civil systems. PhD thesis, University of California, Berkeley, USA.

Milberg, C T and Tommelein, I D (2020) Methods for managing tolerance compatibility: Windows in cast-in-place concrete. Journal of Construction Engineering and Management, 146(2), ISSN 0733-9364

Milligan, C E (1992) Integrated construction coordination change response system. PhD thesis, Texas A&M University, USA.

Mirabi, E and Akrami Abarghuie, F (2023) Investigating the climate-adaptive design strategies of residential earth-sheltered buildings in Iran. International Journal of Building Pathology and Adaptation, 41(5), pp. 1029-1048. ISSN 23984708

Mirahadi, S (2020) EvacuSafe: A smart evacuation management system for buildings. PhD thesis, University of Toronto, Canada.

Mirzabeigi, S (2024) Integrated building envelope assessment towards automation of energy retrofits: Drone-based data acquisition, automated thermal anomaly detection, and workflow development. PhD thesis, State University of New York College of Environmental Science and Forestry, USA.

Mitkees, L; Heidarinejad, M; Sabatino, M and Stephens, B (2024) Occupant thermal comfort and indoor environmental conditions in Mies van der Rohe's S.R. Crown hall. Building Research & Information, 52(3), pp. 249-272. ISSN 0961-3218

Mofolasayo, A (2025) Multi-variable evaluation of factors that contribute to the environmental impact of onsite and offsite building construction: An illustration using roof panel fastening schedule. International Journal of Construction Management, 25(16), pp. 1938-1951. ISSN 1562-3599

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Mohamed, Y; Borrego, D; Francisco, L; Al-Hussein, M; Abourizk, S and Hermann, U (2007) Simulation-based scheduling of module assembly yards: Case study. Engineering, Construction and Architectural Management, 14(3), pp. 293-311. ISSN 0969-9988

Mohamed, Yamen (2023) Adopting modern methods of construction in low-income housing projects in Egypt. PhD thesis, London South Bank University, UK.

Mohammed, A. S.; Pim-Wusu, M.; Amoah, C. and Nyagblormase, G. (2025) Examining technology-driven facilities management practices in campus mosques on muslim student well-being for academic success. International Journal of Building Pathology and Adaptation, 44(4), pp. 976-994. ISSN 2398-4708

Mohammed, O D (2024) An analytical approach for the determination of helical gear tooth geometry. Journal of Engineering, Design and Technology, 22(6), pp. 2020-2042. ISSN 1726-0531

Mohanta, A and Das, S (2023) Decision support system for the early stage of green building envelope design considering energy and maintainability. Architectural Engineering and Design Management, 19(2), pp. 163-182. ISSN 1745-2007

Mohanta, A; Das, S and Mohanty, R N (2021) Building envelope trade-off method integrated with BIM-based framework for energy-efficient building envelope. Architectural Engineering and Design Management, 17(5-6), pp. 516-536. ISSN 1745-2007

Mohieldin, Y A (1989) Analysis of construction processes with nonstationary work task durations. PhD thesis, University of Maryland, College Park, USA.

Mohsen, O; Petre, C and Mohamed, Y (2023) Machine-learning approach to predict total fabrication duration of industrial pipe spools. Journal of Construction Engineering and Management, 149(2): 04022172, ISSN 0733-9364

Mohsen, Osama (2021) A machine learning approach to predict production time in industrialized building construction. PhD thesis, University of Alberta, Canada.

Mohseni, H; Setunge, S; Zhang, G and Wakefield, R (2017) Markov process for deterioration modeling and asset management of community buildings. Journal of Construction Engineering and Management, 143(6): 04017003, ISSN 0733-9364

Mokhtar, A H M (1998) An information model for managing design changes in a collaborative multidisciplinary design environment. PhD thesis, Concordia University, Canada.

Mollaei, A; Bachmann, C and Haas, C (2025) Evaluating the potential impact of building design strategies on material recovery during deconstruction. Journal of Construction Engineering and Management, 151(6): 04025065, ISSN 0733-9364

Monticelli, C and Zanelli, A (2021) Material saving and building component efficiency as main eco-design principles for membrane architecture: Case: studies of etfe enclosures. Architectural Engineering and Design Management, 17(3-4), pp. 264-280. ISSN 1745-2007

Moore, T; Ridley, I; Strengers, Y; Maller, C and Horne, R (2017) Dwelling performance and adaptive summer comfort in low-income Australian households. Building Research & Information, 45(4), pp. 443-456. ISSN 0961-3218

Morcous, G S L (2000) Case -based reasoning for modeling bridge deterioration. PhD thesis, Concordia University, Canada.

Morgado, J; Flores-Colen, I; De Brito, J and Silva, A (2017) Maintenance planning of pitched roofs in current buildings. Journal of Construction Engineering and Management, 143(7): 05017010, ISSN 0733-9364

Morgan, M and Cruickshank, H (2014) Quantifying the extent of space shortages: English dwellings. Building Research & Information, 42(6), pp. 710-724. ISSN 0961-3218

Morton, N; Vincent, W; Schiessel Harvey, N and Curzon, R (2017) 'Thank you for taking the time to understand': A critical reflection on peer-led interventions in early experiences of higher education. International Journal of Construction Education and Research, 13(3), pp. 163-79. ISSN 1557-8771

Moselhi, O and Hassanein, A (2003) Optimized scheduling of linear projects. Journal of Construction Engineering and Management, 129(6), pp. 664-673. ISSN 0733-9364

Moselhi, O and Nicholas, M J (1990) Hybrid expert system for construction planning and scheduling. Journal of Construction Engineering and Management, 116(2), pp. 221-238. ISSN 0733-9364

Mostafaeipour, A; Goudarzi, H; Sedaghat, A; Jahangiri, M; Hadian, H; Rezaei, M; Golmohammadi, A M and Karimi, P (2019) Energy efficiency for cooling buildings in hot and dry regions using sol-air temperature and ground temperature effects. Journal of Engineering, Design and Technology, 17(3), pp. 613-628. ISSN 1726-0531

Mostofi, F; Toǧan, V; Başaǧa, H B; Çltlpltloǧlu, A and Tokdemir, O B (2023) Multiedge graph convolutional network for house price prediction. Journal of Construction Engineering and Management, 149(11): 04023112, ISSN 0733-9364

Motawa, I and Almarshad, A (2015) Case-based reasoning and BIM systems for asset management. Built Environment Project and Asset Management, 5(3), pp. 233-247. ISSN 2044-124X

Mousaei, A; Taghaddos, H; Marzieh Bagheri, S and Hermann, U (2021) Optimizing heavy lift plans for industrial construction sites using dijkstra's algorithm. Journal of Construction Engineering and Management, 147(11): 04021160, ISSN 0733-9364

Moussa, M; Ruwanpura, J and Jergeas, G (2006) Decision tree modeling using integrated multilevel stochastic networks. Journal of Construction Engineering and Management, 132(12), pp. 1254-1266. ISSN 0733-9364

Moussa, M; Ruwanpura, J and Jergeas, G (2007) CTAN for risk assessments using multilevel stochastic networks. Journal of Construction Engineering and Management, 133(1), pp. 96-101. ISSN 0733-9364

Moussourakis, J and Haksever, C (2004) Flexible model for time/cost tradeoff problem. Journal of Construction Engineering and Management, 130(3), pp. 307-314. ISSN 0733-9364

Mrazovic, N and Fischer, M (2022) Assessment framework for additive manufacturing in the AEC industry. Journal of Construction Engineering and Management, 148(5): 04022013, ISSN 0733-9364

Mtunzi, B and Meyer, E L (2015) Design and implementation of a directly cooled PV/T. Journal of Engineering, Design and Technology, 13(3), pp. 369-379.

Muaz, Fagiar (2019) Forensic schedule information modeling for analysis of time claims in construction projects. PhD thesis, University of Alberta, Canada.

Mukhopadhyay, J (2020) Observations of energy consumption and IEQ in a 'tiny house'. Building Research & Information, 48(6), pp. 613-631. ISSN 0961-3218

Murata, F M (2013) Cross-cultural leadership for global construction projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(5), pp. 240-248. ISSN 17514312

Müller, P (2010) Procedural modeling of buildings. DSc thesis, ETH Zürich, Switzerland.

Nadi, E (2019) Construction labor productivity benchmarking: A comparison between on-site construction and prefabrication. PhD thesis, Marquette University, USA.

Naji, K K (1997) The development of a virtual environment for simulating equipment-based construction operations in real-time object-oriented systems. PhD thesis, University of Florida, USA.

Najjar, M K; Figueiredo, K; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. International Journal of Construction Management, 22(4), pp. 541-555. ISSN 1562-3599

Nam, T-J (2001) Investigations of collaborative design environments: a framework for real-time collaborative 3D CAD. PhD thesis, Brunel University, UK.

Naumets, S; Lu, M and Ali, M (2022) Project schedule development under environment-induced time-window constraints: Case of constructing river-crossing bridge in remote Northern region. Journal of Construction Engineering and Management, 148(12): 04022129, ISSN 0733-9364

Navon, R and Arkin, H (1993) Economic comparison of an air-conditioner and a desert cooler for residences in arid areas. Construction Management and Economics, 11(1), pp. 62-70. ISSN 01446193

Navon, R; Shapira, A and Shechori, Y (2000) Automated rebar constructability diagnosis. Journal of Construction Engineering and Management, 126(5), pp. 389-397. ISSN 0733-9364

Nazari, S; Keshavarz Mirza Mohammadi, P; Ghaffarianhoseini, A; Ghaffarianhoseini, A; Doan, D T and Almhafdy, A (2025) Comparison of shading design between the northern and southern hemispheres: Using the NSGA-II algorithm to reduce building energy consumption and improve occupants' comfort. Smart and Sustainable Built Environment, 14(4), pp. 889-920. ISSN 2046-6099

Ndukwe, Chigozie Victor (2023) Impact of globalisation on the construction supply chain: Challenges and responses in Victoria. PhD thesis, University of Melbourne, Australia.

Nelson, T N T; Poleacovschi, C; Appelgate, M; Drake, R; Swalwell, K; Jackson, C; Svec, J and Cetin, K (2024) Making social justice central to construction engineering: Testing interventions for educating reflexive engineers. Journal of Construction Engineering and Management, 150(10): 04024122, ISSN 0733-9364

Newaz, M T; Davis, P; Jefferies, M and Pillay, M (2020) Examining the psychological contract as mediator between the safety behavior of supervisors and workers on construction sites. Journal of Construction Engineering and Management, 146(1): 04019094, ISSN 0733-9364

Newsham, G; Brand, J; Donnelly, C; Veitch, J; Aries, M and Charles, K (2009) Linking indoor environment conditions to job satisfaction: A field study. Building Research & Information, 37(2), pp. 129-147. ISSN 0961-3218

Newsham, G R; Birt, B J; Arsenault, C; Thompson, A J L; Veitch, J A; Mancini, S; Galasiu, A D; Gover, B N; MacDonald, I A and Burns, G J (2013) Do green buildings have better indoor environments? New evidence. Building Research & Information, 41(4), pp. 415-434. ISSN 0961-3218

Newton, L A (2004) The impact of quality on building life cycle costs. PhD thesis, University of New Brunswick, Canada.

Nguyen, D C; Nguyen, T Q; Jin, R; Jeon, C H and Shim, C S (2022) BIM-based mixed-reality application for bridge inspection and maintenance. Construction Innovation, 22(3), pp. 487-503. ISSN 1471-4175

Nguyen, H V (2010) Process-based cost modeling to support target value design. PhD thesis, University of California, Berkeley, USA.

Nguyen, L D and Ibbs, W (2008) Flora: New forensic schedule analysis technique. Journal of Construction Engineering and Management, 134(7), pp. 483-491. ISSN 0733-9364

Nguyen, L D and Nguyen, H T (2013) Relationship between building floor and construction labor productivity a case of structural work. Engineering, Construction and Architectural Management, 20(6), pp. 563-575. ISSN 0969-9988

Nguyen, L D; Tran, D Q and Chandrawinata, M P (2016) Predicting safety risk of working at heights using Bayesian networks. Journal of Construction Engineering and Management, 142(9): 04016041, ISSN 0733-9364

Nguyen, L d (2007) The dynamics of float, logic, resource allocation, and delay timing in forensic schedule analysis and construction delay claims. PhD thesis, University of California, Berkeley, USA.

Nguyen, P A; Bokel, R and Dobbelsteen, A (2019) Improving energy efficiency in Vietnamese tube houses: A survey of sustainable challenges and potentials. Smart and Sustainable Built Environment, 8(5), pp. 366-390. ISSN 2046-6099

Nguyen, T-H (1999) Automated deduction of topological information in a computer-based building design system. PhD thesis, Pennsylvania State University, USA.

Nicolini, D (2007) Studying visual practices in construction. Building Research & Information, 35(5), pp. 576-580. ISSN 0961-3218

Nigra, M; Lo Verso, V R M; Robiglio, M; Pellegrino, A and Martina, M (2022) 'Re-coding' environmental regulation–a new simplified metric for daylighting verification during the window and indoor space design process. Architectural Engineering and Design Management, 18(4), pp. 521-544. ISSN 1745-2007

Ning, X; Shan, M; Li, Z and Nie, Z (2025) Prediction of construction material prices based on the sliding window catboost model. Journal of Construction Engineering and Management, 151(12): 04025196, ISSN 0733-9364

Niskanen, T and Lauttalammi, J (1989) Accident prevention in materials handling at building construction sites. Construction Management and Economics, 7(3), pp. 263-279. ISSN 01446193

Nordby, A S; Berge, B; Hakonsen, F and Hestnes, A G (2009) Criteria for salvageability: The reuse of bricks. Building Research & Information, 37(1), pp. 55-67. ISSN 0961-3218

Nordvik, V and Lisø, K R (2004) A primer on the building economics of climate change. Construction Management and Economics, 22(7), pp. 765-775. ISSN 01446193

Nordwall, U and Olofsson, T (2013) Architectural caring. Architectural qualities from a residential property perspective. Architectural Engineering and Design Management, 9(1), pp. 1-20. ISSN 1745-2007

Nwagwu, C C; Akin, S and Hertwich, E G (2024) Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis. Buildings & Cities, 5(1), pp. 521-539. ISSN 2632-6655

O'Connor, J T; O'Brien, W J and Choi, J O (2014) Critical success factors and enablers for optimum and maximum industrial modularization. Journal of Construction Engineering and Management, 140(6): 4014012, ISSN 0733-9364

O'Connor, J T; O'Brien, W J and Choi, J O (2015) Standardization strategy for modular industrial plants. Journal of Construction Engineering and Management, 141(9): 4015026, ISSN 0733-9364

Obi, L I; Omotayo, T; Ekundayo, D and Oyetunji, A K (2024) Enhancing BIM competencies of built environment undergraduates students using a problem-based learning and network analysis approach. Smart and Sustainable Built Environment, 13(1), pp. 217-238. ISSN 2046-6099

Ogunseiju, O; Olayiwola, J; Akanmu, A and Olatunji, O A (2022) Evaluation of postural-assist exoskeleton for manual material handling. Engineering, Construction and Architectural Management, 29(3), pp. 1358-1375. ISSN 0969-9988

Okampo, E J and Nwulu, N I (2020) Optimal energy mix for a reverse osmosis desalination unit considering demand response. Journal of Engineering, Design and Technology, 18(5), pp. 1287-1303. ISSN 1726-0531

Oke, A E; Aigbavboa, C O and Raphiri, M M (2017) Students' satisfaction with hostel accommodations in higher education institutions. Journal of Engineering, Design and Technology, 15(5), pp. 652-666.

Olearczyk, J (2010) Crane lifting operation planning and lifted object spatial trajectory analysis. PhD thesis, University of Alberta, Canada.

Ollár, A (2024) Spatial design for circularity in residential buildings: Exploring the case of the kitchen. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Oloufa, A A (1988) A framework for the operational simulation of construction projects. PhD thesis, University of California, Berkeley, USA.

Olowa, T; Witt, E and Lill, I (2023) Building information modelling (BIM)–enabled construction education: Teaching project cash flow concepts. International Journal of Construction Management, 23(9), pp. 1494-1505. ISSN 1562-3599

Onyenokporo, N C and Ochedi, E T (2019) Low-cost retrofit packages for residential buildings in hot-humid Lagos, Nigeria. International Journal of Building Pathology and Adaptation, 37(3), pp. 250-272. ISSN 23984708

Orabi, W (2010) Optimizing highway reconstruction and rehabilitation projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Orabi, W and El-Rayes, K (2012) Optimizing the rehabilitation efforts of aging transportation networks. Journal of Construction Engineering and Management, 138(4), pp. 529-539. ISSN 0733-9364

Ortiz, R; Macias-Bernal, J M and Ortiz, P (2018) Vulnerability and buildings service life applied to preventive conservation in cultural heritage. International Journal of Disaster Resilience in the Built Environment, 9(1), pp. 31-47. ISSN 1759-5916

Ortiz, S S (2025) Strengthening construction supply chains: An exploration of decision-making frameworks for resilience in the face of black swan event. PhD thesis, Purdue University, Indiana, USA.

Osorio-Sandoval, C A (2021) BIM-based construction simulation modelling. PhD thesis, University of Nottingham, UK.

Osunsanmi, T O; Aigbavboa, C O; Oke, A and Onyia, M E (2022) Making a case for smart buildings in preventing corona-virus: Focus on maintenance management challenges. International Journal of Construction Management, 22(16), pp. 3109-3118. ISSN 1562-3599

Otegbulu, A C; Osagie, J U and Famuyiwa, F (2009) A value hierarchy study of building services/components in commercial and residential developments: A comparative analysis. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Owusu-Manu, D G; Edwards, D J; Donkor-Hyiaman, K A; Asiedu, R O; Hosseini, M R and Obiri-Yeboah, E (2019) Housing attributes and relative house prices in Ghana. International Journal of Building Pathology and Adaptation, 37(5), pp. 733-746. ISSN 23984708

O’Connor, J T; Rusch, S E and Schulz, M J (1987) Constructability concepts for engineering and procurement. Journal of Construction Engineering and Management, 113(2), pp. 235-248. ISSN 0733-9364

Padala, S P S and M Skanda, P (2025) BIM-based multi-objective optimization framework for volumetric analysis of building projects. Journal of Engineering, Design and Technology, 23(5), pp. 1326-1347. ISSN 1726-0531

Paik, S.; Chung, D.; Kim, Y.; Kim, J. and Kim, H. (2026) Autonomous UAV navigation for close-range image acquisition of scaffold joints. Journal of Construction Engineering and Management, 152(7): 04026081, ISSN 0733-9364

Pakalapati, K; Khalafalla, M and Rueda-Benavides, J (2022) Using moving-window cross-validation algorithm to optimize bid-based cost estimating data usage. International Journal of Construction Management, 22(15), pp. 2855-2863. ISSN 1562-3599

Pallubinsky, H; Kingma, B R M; Schellen, L; Dautzenberg, B; van Baak, M A and van Marken Lichtenbelt, W D (2017) The effect of warmth acclimation on behaviour, thermophysiology and perception. Building Research & Information, 45(7), pp. 800-807. ISSN 0961-3218

Pallyyaguru, Roshani Sandika (2010) Influence of integrating disaster risk reduction within post-disaster infrastructure reconstruction on socio-economic development. PhD thesis, University of Salford, UK.

Palojärvi, L (2009) Managing risks in the international growth business of Finnish construction contractors and building product suppliers. PhD thesis, Helsinki University of Technology, Finland.

Pan, W and Gibb, A G F (2009) Maintenance performance evaluation of offsite and in situ bathrooms. Construction Innovation, 9(1), pp. 7-21. ISSN 1471-4175

Pan, W; Gibb, A G F and Sellars, A B (2008) Maintenance cost implications of utilizing bathroom modules manufactured offsite. Construction Management and Economics, 26(10), pp. 1067-1077. ISSN 1466433X

Pan, Y H (2007) Application of industrialized housing system in major cities in China: A case study of Chongqing. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Papamichael, K (1999) Application of information technologies in building design decisions. Building Research & Information, 27(1), pp. 20-34. ISSN 0961-3218

Park, A (2022) Essays on the theory of bargaining and economics of matching platforms. PhD thesis, University of California, Los Angeles, USA.

Parkinson, T; Schiavon, S; Kim, J and Betti, G (2023) Common sources of occupant dissatisfaction with workspace environments in 600 office buildings. Buildings & Cities, 4(1), pp. 17-35. ISSN 2632-6655

Parry, A (2015) The improvement of delay analysis in the UK construction industry. PhD thesis, Northumbria University, UK.

Pasquire, C; Pennanen, A; Ballard, G and Haahtela, Y (2011) Target costing and designing to targets in construction. Journal of Financial Management of Property and Construction, 16(1), pp. 52-63. ISSN 1366-4387

Passe, U (2020) A design workflow for integrating performance into architectural education. Buildings & Cities, 1(1), pp. 565-578. ISSN 2632-6655

Pastore, L and Andersen, M (2019) Detecting trends and further development potential of contemporary façade design for workspaces. Architectural Engineering and Design Management, 15(4), pp. 267-281. ISSN 1745-2007

Patil, K R; Bhandari, S; Agrawal, A; Ayer, S K; Perry, L A and Hallowell, M R (2023) Analysis of youtube comments to inform the design of virtual reality training simulations to target emotional arousal. Journal of Construction Engineering and Management, 149(9): 04023077, ISSN 0733-9364

Patka, M A; Bugalia, N and Mahalingam, A (2025) Effectiveness of virtual reality in construction quality training: Comparative study. Journal of Construction Engineering and Management, 151(10): 04025145, ISSN 0733-9364

Pavitt, T C (2002) Managing construction interfaces within the building facade. PhD thesis, Loughborough University, UK.

Pavitt, T C and Gibb, A G F (2003) Interface management within construction: In particular, building facade. Journal of Construction Engineering and Management, 129(1), pp. 8-15. ISSN 0733-9364

Paz, Diogo Henrique Fernandes da (2019) Development of a system to support integrated management of construction and demolition waste. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Pearlmutter, D; Freidin, C and Huberman, N (2007) Alternative materials for desert buildings: A comparative life cycle energy analysis. Building Research & Information, 35(2), pp. 144-155. ISSN 0961-3218

Pearson, A D (2014) An investigation of climatically responsive ultra-low energy housing in rural Scotland: a case study. PhD thesis, University of Dundee, UK.

Pearson, J (2014) Effective employer engagement in full time construction-related foundation degrees, with particular emphasis on workplace learning. PhD thesis, Northumbria University, UK.

Peer, S (1987) Principles of an integrated construction company mis with emphasis on its quantity-based sub-system. Construction Management and Economics, 5(3), pp. 199-209. ISSN 01446193

Peltokorpi, A; Olivieri, H; Granja, A D and Seppänen, O (2018) Categorizing modularization strategies to achieve various objectives of building investments. Construction Management and Economics, 36(1), pp. 32-48. ISSN 01446193

Pereira, P F; Ramos, N M M and Simões, M L (2020) Data-driven occupant actions prediction to achieve an intelligent building. Building Research & Information, 48(5), pp. 485-500. ISSN 0961-3218

Perera, S; Senaratne, S; Rodrigo, M N N and Brady, L (2021) Analysis of embodied carbon and cost profiles of school buildings in Australia. Built Environment Project and Asset Management, 11(4), pp. 660-672. ISSN 2044-124X

Perez-Bella, J M; Dominguez-Hernandez, J; Cano-Suñen, E; Del Coz-Diaz, J J and Alvarez Rabanal, F P (2015) Improvement alternatives for determining the watertightness performance of building facades. Building Research & Information, 43(6), pp. 723-736. ISSN 0961-3218

Petkov, I (2022) Optimal decarbonization conditions for buildings & districts: A model-based techno-economic perspective. DSc thesis, ETH Zürich, Switzerland.

Phelan, R S; Radjy, F; Haas, C and Hendrickson, C (1990) Computer-aided concrete-placement optimization. Journal of Construction Engineering and Management, 116(1), pp. 172-187. ISSN 0733-9364

Pilechiha, P; Norouziasas, A; Ghorbani Naeini, H and Jolma, K (2022) Evaluation of occupant's adaptive thermal comfort behaviour in naturally ventilated courtyard houses. Smart and Sustainable Built Environment, 11(4), pp. 793-811. ISSN 2046-6099

Pinky Devi, L and Palaniappan, S (2019) Life cycle energy analysis of a low-cost house in India. International Journal of Construction Education and Research, 15(4), pp. 256-275. ISSN 1557-8771

Pirooz Far Poorang, A E (2008) Mass-constomisation: The application on design, fabrication and implementation (DFI) processes of building envelopes. PhD thesis, University of Sheffield, UK.

Piroozfar, P A E and Farr, E R P (2015) Visual perception and the choice of systemised building façades. Architectural Engineering and Design Management, 11(1), pp. 65-81. ISSN 1745-2007

Pivo, G (2014) Unequal access to energy efficiency in us multifamily rental housing: Opportunities to improve. Building Research & Information, 42(5), pp. 551-573. ISSN 0961-3218

Platt, R T (1998) Development of a ready-to-assemble construction system. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Pons, O; Casanovas-Rubio, M M; Armengou, J and De La Fuente, A (2021) Sustainability-driven decision-making model: Case study of fiber-reinforced concrete foundation piles. Journal of Construction Engineering and Management, 147(10): 04021116, ISSN 0733-9364

Popescu-Kohler, A I (1998) Improvements to construction delay analysis techniques. PhD thesis, University of Texas at Austin, USA.

Popovic, D (2020) The development and use of product platforms in single-family industrialized house building. PhD thesis, Jönköping University, Sweden.

Porritt, S M; Cropper, P C; Shao, L and Goodier, C I (2013) Heat wave adaptations for UK dwellings and development of a retrofit toolkit. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 269-286. ISSN 1759-5916

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Prayoonhong, C (1995) An integrated information model for the building process. DArch thesis, University of Michigan, USA.

Prieto, A J; Silva, A; de Brito, J and Macias-Bernal, J M (2018) Serviceability of facade claddings. Building Research & Information, 46(2), pp. 179-12. ISSN 0961-3218

Purushothaman, A and Thirumaran, K (2021) Evaluating the climate-responsive design strategies of vernacular buildings in konearirajapuram village, nagappattinam, India. International Journal of Building Pathology and Adaptation, 39(2), pp. 175-196. ISSN 23984708

Pérez-Bella, J M; Domínguez-Hernández, J; Rodríguez-Soria, B; Del Coz-Díaz, J J and Cano-Suñén, E (2013) A new method for determining the water tightness of building facades. Building Research & Information, 41(4), pp. 401-414. ISSN 0961-3218

Pérez-Bella, J M; Domínguez-Hernández, J; Rodríguez-Soria, B; del Coz-Díaz, J J; Cano-Suñén, E and Navarro-Manso, A (2013) An extended method for comparing watertightness tests for facades. Building Research & Information, 41(6), pp. 706-721. ISSN 0961-3218

Pérez-Valcárcel, J; Aragón, J; Muñiz, S; Freire-Tellado, M and Mosquera, E (2024) Transportable temporary homes with folding roof. Architectural Engineering and Design Management, 20(2), pp. 337-357. ISSN 1745-2007

Qasem, A and Almohassen, A S (2025) A virtual reality-based constructability index for construction projects. Construction Innovation, 25(2), pp. 442-460. ISSN 1471-4175

Queiroz, N; Fernandes, L and Fernando Oscar Ruttkay, P (2024) Comparison of fast daylighting climate-based simulation methods for parametric design: Two-phase, three-phase method and path tracing. Architectural Engineering and Design Management, 20(3), pp. 559-577. ISSN 1745-2007

Qureshi, A H; Alaloul, W S; Murtiyoso, A; Hussain, S J; Saad, S and Musarat, M A (2024) Automated scaling of point cloud rebar model via aruco-supported controlled markers. Journal of Construction Engineering and Management, 150(3): 04023170, ISSN 0733-9364

Rad, H N and Khosrowshahi, F (1999) Visualization of the impact of time on internal flooring. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Rahayu, H P; Comfort, L K; Haigh, R; Amaratunga, D and Khoirunnisa, D (2020) A study of people-centered early warning system in the face of near-field tsunami risk for Indonesian coastal cities. International Journal of Disaster Resilience in the Built Environment, 11(2), pp. 241-262. ISSN 1759-5916

Rahbar, F (1997) Computer-aided parametric planning (CAPP). PhD thesis, Iowa State University, USA.

Rahman, S (2010) Knowledge-based decision support system for multi criteria roofing material selection and cost modelling. PhD thesis, University of Ulster, UK.

Rahman, S; Perera, S; Odeyinka, H and Bi, Y (2008) A conceptual knowledge-based cost model for optimizing the selection of materials and technology for building design. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Raisbeck, P (2017) Tribes, warlords and transformers: An institutional logics model of the architectural profession. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Rajagopalan, N (2011) Residential life cycle assessment modeling for green buildings and building products. PhD thesis, University of Pittsburgh, USA.

Ramos, N M M and De Freitas, V P (2009) Experimental determination of the hygroscopic inertia of building materials. Building Research & Information, 37(3), pp. 293-299. ISSN 0961-3218

Ramzanpour, M; Sharghi, A; Nourtaghani, A and Saleh Sedghpour, B (2023) The reduction of low-income housing stigma with facade features; low- and medium-sized cities. Architectural Engineering and Design Management, 19(3), pp. 250-266. ISSN 1745-2007

Rana, J; Hasan, R; Sobuz, H R and Tam, V W Y (2022) Impact assessment of window to wall ratio on energy consumption of an office building of subtropical monsoon climatic country Bangladesh. International Journal of Construction Management, 22(13), pp. 2528-2553. ISSN 1562-3599

Rana, M J; Hasan, M R and Sobuz, M H R (2022) An investigation on the impact of shading devices on energy consumption of commercial buildings in the contexts of subtropical climate. Smart and Sustainable Built Environment, 11(3), pp. 661-691. ISSN 2046-6099

Rana, M J; Hasan, M R; Sobuz, M H R and Sutan, N M (2021) Evaluation of passive design strategies to achieve nZEB in the corporate facilities: The context of bangladeshi subtropical monsoon climate. International Journal of Building Pathology and Adaptation, 39(4), pp. 619-654. ISSN 23984708

Rasli, N B I; Ismail, M R; Ramli, N A; Shith, S; Nazir, A U M; Yusof, N F M and Zainordin, N S (2019) Compliance of indoor air contaminants within the main prayer halls of mosques in Malacca with Malaysia's indoor air quality standard. Journal of Construction in Developing Countries, 24(2), pp. 105-121. ISSN 1823-6499

Ravirala, V (1995) Multi-criteria optimization methodologies for highway program development. PhD thesis, Rensselaer Polytechnic Institute, USA.

Rawlinson, F and Farrell, P (2010) Construction site graffiti: Discourse analysis as a window into construction site culture. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Razem, M; Khalid, R and Sunikka-Blank, M (2025) Unveiling women's ventilation practices and comfort in Jordan: Video diaries as method for post-occupancy evaluation. Building Research & Information, 53(1-2), pp. 56-76. ISSN 0961-3218

Razkenari, M A (2019) Framework for measuring industrialized construction maturity. PhD thesis, University of Florida, USA.

Ren, S (1997) GIS-based tools for earthquake risk assessment of point and spatially distributed lifeline systems. PhD thesis, State University of New York at Buffalo, USA.

Ren, S; Qiang, G; Tang, S; Zhang, C; Hyung-Joon, S and Wu, K (2024) An automatic design-feedback process for structural prefabricated components quantity take-off calculation using BIM. Architectural Engineering and Design Management, 20(2), pp. 287-302. ISSN 1745-2007

Resalati, S; Kendrick, C C and Hill, C (2020) Embodied energy data implications for optimal specification of building envelopes. Building Research & Information, 48(4), pp. 429-445. ISSN 0961-3218

Riad, N I; Arditi, D and Mohammadi, J (1994) Integrated system for managing owner-directed project acceleration. Journal of Construction Engineering and Management, 120(1), pp. 77-95. ISSN 0733-9364

Riahi Zaniani, J; Taghipour Ghahfarokhi, S; Jahangiri, M and Alidadi Shamsabadi, A (2019) Design and optimization of heating, cooling and lightening systems for a residential villa at Saman city, Iran. Journal of Engineering, Design and Technology, 17(1), pp. 41-52. ISSN 1726-0531

Ribeiro, C; Pereira, P F; Ramos, N M M; Flores-Colen, I and Valentim, N (2024) Assessment of the impacts of balconies on indoor environmental quality in mild climate conditions, Portugal. Building Research & Information, 52(3), pp. 292-310. ISSN 0961-3218

Riggio, M; Alhariri, N and Hansen, E (2020) Paths of innovation and knowledge management in timber construction in North America: A focus on water control design strategies in CLT building enclosures. Architectural Engineering and Design Management, 16(1), pp. 58-83. ISSN 1745-2007

Rijal, H B; Humphreys, M A and Nicol, J F (2009) Understanding occupant behaviour: The use of controls in mixed-mode office buildings. Building Research & Information, 37(4), pp. 381-396. ISSN 0961-3218

Riley, D R and Sanvido, V E (1997) Space planning method for multistory building construction. Journal of Construction Engineering and Management, 123(2), pp. 171-180. ISSN 0733-9364

Ritter, V (2012) Optimizing the combination of active and passive building components in refurbishment projects to allow for net-zero emission architecture. DSc thesis, ETH Zürich, Switzerland.

Riza, R (2014) Integration of wind catchers in modern residential buildings in the uae as a means of providing thermal comfort. PhD thesis, British University in Dubai, UAE.

Roberts, B M; Allinson, D and Lomas, K J (2023) Evaluating methods for estimating whole house air infiltration rates in summer: Implications for overheating and indoor air quality. International Journal of Building Pathology and Adaptation, 41(1), pp. 45-72. ISSN 23984708

Robertson, B (2020) On-site installation flexibility for disruption management in modular off-site construction systems. PhD thesis, University of Cambridge, UK.

Rodriguez Bernal, C M (2017) Student-centred strategies to integrate theoretical knowledge into project development within architectural technology lecture-based modules. Architectural Engineering and Design Management, 13(3), pp. 223-242. ISSN 1745-2007

Rokooei, S; Shojaei, A and Ly, R (2025) Faculty development program to enhance teaching quality in construction. International Journal of Construction Management, 25(1), pp. 89-98. ISSN 1562-3599

Rose, Colin (2019) Systems for reuse, repurposing and upcycling of existing building components. PhD thesis, University College London, UK.

Roumboutsos, A and Chiara, N (2010) A strategic partnering framework analysis methodology for public-private partnerships. Journal of Financial Management of Property and Construction, 15(3), pp. 235-246. ISSN 1366-4387

Rousseau, L. S. A.; Amini, S.; Akin, S. and Hertwich, E. G. (2026) Retrofitting Norwegian residential buildings: An archetype-based dynamic stock model. Buildings & Cities, 7(1), pp. 757-774. ISSN 2632-6655

Rowe, G M; Meegoda, J N; Jumikis, A; Sharrock, M J; Bandara, N and Hettiarachchi, C H (2004) NJTxtr: a computer program based on laser to monitor asphalt segregation. Journal of Construction Engineering and Management, 130(6), pp. 924-934. ISSN 0733-9364

Roza, C (2006) Environmental assessment: The Eden project. PhD thesis, University College London, UK.

Rozenfeld, O; Sacks, R and Rosenfeld, Y (2009) 'Chaste': Construction hazard assessment with spatial and temporal exposure. Construction Management and Economics, 27(7), pp. 625-638. ISSN 1466433X

Ruikar, D (2004) Design process improvement using a model based approach. PhD thesis, University of Nottingham, UK.

Ruiz, L; Gómez, E; Santos, A G and Vega, S (2010) Study of light-multi-layered façades. Engineering, Construction and Architectural Management, 17(1), pp. 65-77. ISSN 0969-9988

Ruokamo, E; Tikkanen, T; Lukkarinen, J and Karhinen, S (2026) Energy retrofits in shared ownership: Exploring motivations in Finnish housing companies. Building Research & Information, 54(3), pp. 289-305. ISSN 0961-3218

Russell, J S; Skibniewski, M J and Vanegas, J A (1990) Framework for construction robot fleet management system. Journal of Construction Engineering and Management, 116(3), pp. 448-462. ISSN 0733-9364

Ryu, J; Seo, J; Jebelli, H and Lee, S (2019) Automated action recognition using an accelerometer-embedded wristband-type activity tracker. Journal of Construction Engineering and Management, 145(1): 04018114, ISSN 0733-9364

Saadi, A and Belhadef, H (2020) Deep neural networks for Arabic information extraction. Smart and Sustainable Built Environment, 9(4), pp. 467-482. ISSN 2046-6099

Sachchithananthan, M and Thayaparan, M (2025) A framework to select suitable sustainable materials for high-rise buildings in Sri Lanka. International Journal of Construction Management, 25(9), pp. 1072-1086. ISSN 1562-3599

Sacks, R (1997) Computer integrated construction: project data model representation and use. Unpublished PhD thesis, Technion Israel Institute of Technology, Israel.

Sacks, R; Eastman, C M and Lee, G (2004) Process model perspectives on management and engineering procedures in the precast/prestressed concrete industry. Journal of Construction Engineering and Management, 130(2), pp. 206-215. ISSN 0733-9364

Sadeghi, Naimeh (2015) A hybrid fuzzy discrete event simulation framework for analysis of stochastic and subjective uncertainties in construction projects. PhD thesis, University of Alberta, Canada.

Sadeghifar, M; Pazhouhanfar, M and Farrokhzad, M (2019) An exploration of the relationships between urban building façade visual elements and people's preferences in the city of Gorgan, Iran. Architectural Engineering and Design Management, 15(6), pp. 445-458. ISSN 1745-2007

Sadeghpour, F; Moselhi, O and Alkass, S T (2006) Computer-aided site layout planning. Journal of Construction Engineering and Management, 132(2), pp. 143-151. ISSN 0733-9364

Sadooghi, P and Kherani, N P (2022) Influence of metallo-dielectric optical properties on thermal resistance and solar heat gain coefficient of multi-pane glazing systems in hot and cold climates. Architectural Engineering and Design Management, 18(6), pp. 894-910. ISSN 1745-2007

Safizadeh, M (2024) Simulation of the circulation complexity in student residence buildings using space syntax analyses (Case studies: Highland hall, Rita Atkinson, Rutgers University and Tooker Residences, USA). Architectural Engineering and Design Management, 20(4), pp. 741-760. ISSN 1745-2007

Sahebzadeh, S; Dalvand, Z; Sadeghfar, M and Heidari, A (2020) Vernacular architecture of Iran's hot regions; elements and strategies for a comfortable living environment. Smart and Sustainable Built Environment, 9(4), pp. 573-593. ISSN 2046-6099

Said, H. and Cao, J. (2026) Optimizing building prefabrication strategies by balancing modularity and complicatedness. Journal of Construction Engineering and Management, 152(7): 04026097, ISSN 0733-9364

Said, H M M (2010) Optimizing site layout and material logistics planning during the construction of critical infrastructure projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Sakib, M N; Chaspari, T and Behzadan, A H (2022) A feedforward neural network for drone accident prediction from physiological signals. Smart and Sustainable Built Environment, 11(4), pp. 1017-1041. ISSN 2046-6099

Salama, T and Moselhi, O (2019) Multi-objective optimization for repetitive scheduling under uncertainty. Engineering, Construction and Architectural Management, 26(7), pp. 1294-1320. ISSN 0969-9988

Salameh, M; Touqan, B and Suliman, A (2024) Enhancing student satisfaction and academic performance through school courtyard design: A quantitative analysis. Architectural Engineering and Design Management, 20(4), pp. 911-927. ISSN 1745-2007

Samarasinghalage, T and Yang, R (2024) Evolutionary-based multi-objective optimization of BIPV envelope design: BIPV curtain wall. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Samo, S R (1999) Energy conservation in UK housing and the effect of building regulations. PhD thesis, University of Manchester, UK.

Sampaio, A Z; Henriques, P G and Ferreira, P S (2004) Virtual reality technology applied in civil engineering education: Visual simulation of construction processes. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Sanga, S A and Lucian, C (2016) Cost shares and factor-cost ratios in owner-built incremental housing in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 21(1), pp. 113-130. ISSN 1823-6499

Sanhudo, L P N (2021) Artificial intelligence for an enhanced as-is BIM energy analysis: Enabling an efficient energy retrofit through the automation of the scan-to-BIM process. PhD thesis, Universidade do Porto, Portugal.

Sanna, F (2018) Timber modern methods of construction: a comparative study. PhD thesis, Edinburgh Napier University, UK.

Sareen, S; Smith, A; Gantioler, S; Balest, J; Brisbois, M C; Tomasi, S; Sovacool, B; Contreras, G A T; Dellavalle, N and Haarstad, H (2023) Social implications of energy infrastructure digitalisation and decarbonisation. Buildings & Cities, 4(1), pp. 612-628. ISSN 2632-6655

Sari, L H; Kayan, B A and Zahriah, Z (2024) An assessment of indoor environmental quality in COVID-19 affected houses: A case study in Banda Aceh, Indonesia. International Journal of Building Pathology and Adaptation, 42(5), pp. 932-956. ISSN 2398-4708

Satwiko, P; Prasetya, A and Suhedi, F (2019) Noise-reducing vents for windows in warm, humid, tropical countries. Architectural Engineering and Design Management, 15(2), pp. 141-158. ISSN 1745-2007

Schlueter, A (2010) Model-based, performance-oriented building design employing distributed service systems. DSc thesis, ETH Zürich, Switzerland.

Schmidt Iii, R; Vibaek, K S and Austin, S (2014) Evaluating the adaptability of an industrialized building using dependency structure matrices. Construction Management and Economics, 32(1-2), pp. 160-182. ISSN 01446193

Schünemann, C; Olfert, A; Schiela, D; Gruhler, K and Ortlepp, R (2020) Mitigation and adaptation in multifamily housing: Overheating and climate justice. Buildings & Cities, 1(1), pp. 36-55. ISSN 2632-6655

Senevirathne, M; Priyankara, H A C; Amaratunga, D; Haigh, R; Weerasinghe, N; Nawaratne, C and Kaklauskas, A (2021) A capacity needs assessment to integrate mooc-based climate change education with the higher education institutions in Europe and developing countries in Asia: Findings of the focused group survey in pchei under the beck project. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 515-527. ISSN 1759-5916

Senouci, A and El-Rayes, K (2009) Time-profit trade-off analysis for construction projects. Journal of Construction Engineering and Management, 135(8), pp. 718-725. ISSN 0733-9364

Sepasgozar, S M E; Forsythe, P and Shirowzhan, S (2018) Evaluation of terrestrial and mobile scanner technologies for part-built information modeling. Journal of Construction Engineering and Management, 144(12): 04018110, ISSN 0733-9364

Sexton, M; Goulding, J; Zhang, X; Kagioglou, M; Aouad, G; Cooper, R and Barrett, P (2005) The role of the hycon design-support tool in elevating hybrid concrete as a design option for structural frames. Engineering, Construction and Architectural Management, 12(6), pp. 568-586. ISSN 0969-9988

Shaheen, A A-H I (2005) A framework for integrating fuzzy set theory and discrete event simulation in construction engineering. PhD thesis, University of Alberta, Canada.

Shahzad, W M; Reddy, S M; Kahandawa, R and Rotimi, J O B (2024) Benefits, constraints and enablers of modular offsite construction (MOSC) in New Zealand high-rise buildings. Engineering, Construction and Architectural Management, 31(10), pp. 4042-4061. ISSN 0969-9988

Shalaby, A and Ezeldin, A S (2022) A model for work packages optimization in results-based-finance projects. Engineering, Construction and Architectural Management, 29(7), pp. 2810-2835. ISSN 0969-9988

Shalaby, A M H (2021) Model for the automated generation of optimized work packages in results-based-finance mega sanitation projects. PhD thesis, The American University in Cairo, Egypt.

Shan, Y; Imran, H; Lewis, P and Zhai, D (2017) Investigating the latent factors of quality of work-life affecting construction craft worker job satisfaction. Journal of Construction Engineering and Management, 143(5): 04016134, ISSN 0733-9364

Shang, H; Anumba, C J; Bouchlaghem, D M; Miles, J C; Cen, M and Taylor, M (2005) An intelligent risk assessment system for distributed construction teams. Engineering, Construction and Architectural Management, 12(4), pp. 391-409. ISSN 0969-9988

Shanika, V G; Jayawickrama, T S and Perera, B A K S (2023) The adaptability of sustainability education in quantity surveying degree programs in Sri Lanka: The industry perception. International Journal of Construction Education and Research, 19(3), pp. 299-320. ISSN 1557-8771

Shapira, A; Simcha, M and Goldenberg, M (2012) Integrative model for quantitative evaluation of safety on construction sites with tower cranes. Journal of Construction Engineering and Management, 138(11), pp. 1281-1293. ISSN 0733-9364

Shareef, S; Mushtaha, E S; Abu Dabous, S and Alsyouf, I (2024) Holistic analysis for the efficiency of the thermal mass performance of precast concrete panels in hot climate zones. Engineering, Construction and Architectural Management, 31(10), pp. 4184-4206. ISSN 0969-9988

Sheffer, D A (2011) Innovation in modular industries: Implementing energy-efficient innovations in us buildings. PhD thesis, Stanford University, USA.

Shehab-Eldeen, T (2002) An automated system for detection, classification and rehabilitation of defects in sewer pipes. PhD thesis, Concordia University, Canada.

Shen, K; Li, X; Cao, X and Zhang, Z (2022) Prefabricated construction process optimization based on rework risk. Journal of Construction Engineering and Management, 148(6): 04022031, ISSN 0733-9364

Shi, J (2017) A quantitative method for assessing home envelope's energy performance using measured data. International Journal of Construction Management, 17(2), pp. 89-99. ISSN 1562-3599

Shi, M; Wang, J; Li, Q; Cui, B; Guan, S and Zeng, T (2022) Accelerated earth-rockfill dam compaction by collaborative operation of unmanned roller fleet. Journal of Construction Engineering and Management, 148(7): 04022046, ISSN 0733-9364

Shih, N J and Huang, Y S (2001) A study of reflection glare in taipei. Building Research & Information, 29(1), pp. 30-39. ISSN 0961-3218

Shin, S and Issa, R R A (2021) Bimasr: Framework for voice-based BIM information retrieval. Journal of Construction Engineering and Management, 147(10): 04021124, ISSN 0733-9364

Shohet, I M (2003) Building evaluation methodology for setting maintenance priorities in hospital buildings. Construction Management and Economics, 21(7), pp. 681-692. ISSN 01446193

Shohet, I M and Laufer, A (1996) Exterior cladding methods: A technoeconomic analysis. Journal of Construction Engineering and Management, 122(3), pp. 242-247. ISSN 0733-9364

Shohet, I M and Paciuk, M (2004) Service life prediction of exterior cladding components under standard conditions. Construction Management and Economics, 22(10), pp. 1081-1090. ISSN 01446193

Shohet, I M and Paciuk, M (2006) Service life prediction of exterior cladding components under failure conditions. Construction Management and Economics, 24(2), pp. 131-148. ISSN 01446193

Shohet, I M; Puterman, M and Gilboa, E (2002) Deterioration patterns of building cladding components for maintenance management. Construction Management and Economics, 20(4), pp. 305-314. ISSN 01446193

Shou, T.; Pan, Y. and Zhao, B. (2026) Vernacular ecological construction: A diagrammatic exploration on the composition modes of spatial-landscape in huizhou courtyard dwellings. Architectural Engineering and Design Management, 22(2), pp. 446-470. ISSN 1745-2007

Shtub, A (1988) The integration of CPM and material management in project management. Construction Management and Economics, 6(4), pp. 261-272. ISSN 01446193

Sia, M K; Yew, V W C and Siew, C L (2018) Influence of feng shui factors on house buying intention of Malaysian Chinese. Architectural Engineering and Design Management, 14(6), pp. 427-439. ISSN 1745-2007

Sibanda, V; Mpofu, K and Trimble, J (2021) Methodology for the design of a reconfigurable guillotine shear and bending press machine (rgs&BPM). Journal of Engineering, Design and Technology, 19(6), pp. 1317-1343. ISSN 1726-0531

Sibanda, V; Mpofu, K; Trimble, J and Kanganga, M (2020) Development of part families for a reconfigurable machine. Journal of Engineering, Design and Technology, 18(5), pp. 991-1014. ISSN 1726-0531

Silvestri, A; Paraciani, N and Villani, T (2021) Performance evaluation of textile materials for lightweight envelopes in minor sports facilities and their impact on indoor comfort. Architectural Engineering and Design Management, 17(3-4), pp. 347-359. ISSN 1745-2007

Simon, M and Meyer, E L (2012) Low cost I-V system employing variable power supply unit as an electronic load. Journal of Engineering, Design and Technology, 10(3), pp. 330-344. ISSN 1726-0531

Singh, J (2021) BIM-based automatic piping layout design and schedule optimization. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Singh, M M; Sawhney, A and Sharma, V (2017) Utilising building component data from BIM for formwork planning. Construction Economics and Building, 17(4), pp. 20-36. ISSN 2204-9029

Singh, S and Ramiya, A M (2025) Assessing avalanche susceptibility using the analytic hierarchical process and multi-criteria weighted overlay: A case study of the leh-parthapur road axis. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 437-455. ISSN 1759-5908

Singhaputtangkul, N (2012) Knowledge-based decision support system quality function deployment (kbdss-qfd) tool for assessment of building envelope materials and designs in the early design stage. PhD thesis, National University of Singapore, Singapore.

Singhaputtangkul, N (2017) A decision support tool to mitigate decision-making problems faced by a building design team. Smart and Sustainable Built Environment, 6(1), pp. 2-18. ISSN 2046-6099

Singhaputtangkul, N and Zhao, X (2016) Applying a fuzzy consensus scheme to enhance the group decision making of a building envelope design team. Journal of Construction Engineering and Management, 142(8): 4016025, ISSN 0733-9364

Slaughter, E S (2001) Design strategies to increase building flexibility. Building Research & Information, 29(3), pp. 208-217. ISSN 0961-3218

Small, E P (1999) Development of a methodology for the integration of seismic risk mitigation activities in project and network level bridge management systems. PhD thesis, State University of New York at Buffalo, USA.

Smallwood, J J (2004) The influence of clients on contractor health and safety (H&S). In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Smallwood, J J; Allen, C J and Deacon, C H (2020) The role of industry 4.0 in construction occupational health (OH). In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Smallwood, J J and Cumberlege, R (2016) Construction management and quantity surveying students perceptions towards production analysis and measuring quantities for construction purposes. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Soetanto, R; Dainty, A R J; Glass, J and Price, A D F (2006) Towards an explicit design decision process: The case of the structural frame. Construction Management and Economics, 24(6), pp. 603-614. ISSN 1466433X

Soetanto, R; Dainty, A R J; Glass, J and Price, A D F (2006) Empirical evaluation of structural frame performance criteria: Realizing the potential of hybrid concrete construction. Journal of Construction Engineering and Management, 132(3), pp. 278-290. ISSN 0733-9364

Soetanto, R; Glass, J; Dainty, A R J and Price, A D F (2007) Structural frame selection: Case studies of hybrid concrete frames. Building Research & Information, 35(2), pp. 206-219. ISSN 0961-3218

Soleimanifar, Meimanat (2016) Integrated project management framework for a pipe spool fabrication shop. PhD thesis, University of Alberta, Canada.

Solomon, T (2021) Change blindness in the construction industry. PhD thesis, George Mason University, USA.

Sommerville, J; Craig, N and Charles, A (2011) No-fines homes: The make or break question? In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Song, T.; Feng, Y. and Xu, L. (2026) A study of balcony design characteristics promoting perceived restorativeness: A stated preference method. Engineering, Construction and Architectural Management, pp. 1-25. ISSN 0969-9988

Song, J; Fan, S; Lin, W; Mottet, L; Woodward, H; Davies Wykes, M; Arcucci, R; Xiao, D; Debay, J E; ApSimon, H; Aristodemou, E; Birch, D; Carpentieri, M; Fang, F; Herzog, M; Hunt, G R; Jones, R L; Pain, C; Pavlidis, D; Robins, A G; Short, C A and Linden, P F (2018) Natural ventilation in cities: The implications of fluid mechanics. Building Research & Information, 46(8), pp. 809-828. ISSN 0961-3218

Song, S H; Choi, J O and Cho, H (2024) Transportation-induced impact on a prefinished volumetric modular house using trailer bogie: Case study. Journal of Construction Engineering and Management, 150(7): 05024007, ISSN 0733-9364

Song, X; Carlsson, C and Nguyen, D (2025) Life cycle assessment of geotechnical works for high-rise building construction on soft clay in Sweden. Building Research & Information, 53(6), pp. 717-733. ISSN 0961-3218

Song, Y and Chua, D K H (2011) Requirement and availability time-window analysis of intermediate function. Journal of Construction Engineering and Management, 137(11), pp. 967-975. ISSN 0733-9364

Sorooshnia, E; Rashidi, M; Rahnamayiezekavat, P; Rezaei, F and Samali, B (2023) Optimum external shading system for counterbalancing glare probability and daylight illuminance in sydney's residential buildings. Engineering, Construction and Architectural Management, 30(1), pp. 296-320. ISSN 0969-9988

Soudbaksh, K; Etminan, M; Hakimazari, M and Salavatian, S (2022) Impacts of window factors and building orientation on energy consumption in residential buildings of humid temperate climatic zone in Iran. Journal of Construction in Developing Countries, 27(2), pp. 235-262. ISSN 1823-6499

Ssenyimba, S; Kigozi, J; Tumutegyereize, P; Muyonga, J H and Mutumba, R (2022) Design and evaluation of a refractance window lab-scale dryer. Journal of Engineering, Design and Technology, 20(6), pp. 1499-1518. ISSN 1726-0531

Stafford, A (2011) Long-term monitoring and performance of ground source heat pumps. Building Research & Information, 39(6), pp. 566-573. ISSN 0961-3218

Staub-French, S A (2002) Feature-driven activity-based cost estimating. PhD thesis, Stanford University, USA.

Steadman, P; Evans, S and Batty, M (2009) Wall area, volume and plan depth in the building stock. Building Research & Information, 37(5-6), pp. 455-467. ISSN 0961-3218

Stehn, L (2002) Environmental labelling of timber-framed dwellings and their building components. Building Research & Information, 30(4), pp. 248-254. ISSN 0961-3218

Stephenson, P; Morrey, I; Vacher, P and Ahmed, Z (2002) Acquisition and structuring of knowledge for defect prediction in brickwork mortar. Engineering, Construction and Architectural Management, 9(5-6), pp. 396-408. ISSN 0969-9988

Stevens, J D and Murray, A L (1994) Modified roof erection system. Journal of Construction Engineering and Management, 120(4), pp. 828-837. ISSN 0733-9364

Stevenson, F and Rijal, H B (2010) Developing occupancy feedback from a prototype to improve housing production. Building Research & Information, 38(5), pp. 549-563. ISSN 0961-3218

Stewart, I; Fenn, P and Aminian, E (2017) Human research ethics: Is construction management research concerned? Construction Management and Economics, 35(11-12), pp. 665-675. ISSN 0144-6193

Stojanovic, V; Trapp, M; Richter, R; Hagedorn, B and Döllner, J (2018) Towards the generation of digital twins for facility management based on 3D point clouds. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Strachan, M E (2013) Energy-led, non-domestic building refurbishment: decision support for a whole-building approach to improvement of operational performance. PhD thesis, Heriot-Watt University, UK.

Straub, A (2002) Strategic technical management of housing stock: Lessons from Dutch housing associations. Building Research & Information, 30(5), pp. 372-381. ISSN 0961-3218

Straub, A D (2010) Competences of maintenance service suppliers servicing end-customers. Construction Management and Economics, 28(11), pp. 1187-1195. ISSN 1466433X

Stringer, A; Dunne, J and Boussabaine, H (2012) Schools design quality: A user perspective. Architectural Engineering and Design Management, 8(4), pp. 257-272. ISSN 1745-2007

Su, P; Lu, W; Chen, J and Hong, S (2024) Floor plan graph learning for generative design of residential buildings: A discrete denoising diffusion model. Building Research & Information, 52(6), pp. 627-653. ISSN 0961-3218

Subasinghe, C (2019) Forsake me not: Balcony spaces in codes and cues among on-campus apartment dwellers. Smart and Sustainable Built Environment, 8(3), pp. 253-266. ISSN 2046-6099

Subchan, B R; Tayeh, B A; Widayanto, E and Wiswamitra, K A (2024) Bamboo's evolution as a sustainable material: A comprehensive exploration and practical integration as a structural element in concrete, bridge frameworks, and architectural perspectives. Architectural Engineering and Design Management, 20(6), pp. 1566-1588. ISSN 1745-2007

Sulaiman, M J (1997) Intesite: Intelligent site layout planning within an object-oriented integrated construction environment. PhD thesis, University of Salford, UK.

Suo, W.; Li, J.; Zhang, J. and Wang, L. (2026) A feature-driven risk allocation modeling methodology for transport infrastructure public-private partnership projects. Journal of Construction Engineering and Management, 152(10): 04026174, ISSN 0733-9364

Sutton, R M (2019) The development of a sustainable construction design process. PhD thesis, University of Liverpool, UK.

Suárez, J L; Gosselin, L and Lehoux, N (2023) Optimizing modularity of prefabricated residential plumbing systems for construction in remote communities. Journal of Construction Engineering and Management, 149(1): 05022017, ISSN 0733-9364

Swaffield, L M and Pasquire, C L (1999) Examination of relationships between building form and function, and the cost of mechanical and electrical services. Construction Management and Economics, 17(4), pp. 483-492. ISSN 01446193

Swallow, M and Zulu, S (2020) Students’ awareness and perception of the value of BIM and 4D for site health and safety management. Journal of Engineering, Design and Technology, 18(2), pp. 414-430. ISSN 1726-0531

Sylvester, K E (1999) An analysis of the benefits of photovoltaic-coated glazing on owning and operating costs of high rise commercial buildings. PhD thesis, Texas A&M University, USA.

Szalay, Z (2008) Modelling building stock geometry for energy, emission and mass calculations. Building Research & Information, 36(6), pp. 557-567. ISSN 0961-3218

Sällström Eriksson, L and Lidelöw, S (2025) Maintaining or replacing a building's windows: A comparative life cycle study. International Journal of Building Pathology and Adaptation, 43(4), pp. 766-786. ISSN 2398-4708

Sędzicki, D.; Nyka, L. and Cudzik, J. (2026) Algorithmic optimization of climbing plant positioning and cnc fabrication for urban microclimate enhancement. Building Research & Information, 54(5), pp. 588-610. ISSN 0961-3218

Tabatabaei Sameni, S (2019) Overheating investigation in UK social housing flats built to the Passivhaus standard. PhD thesis, Coventry University, UK.

Taghaddos, H (2010) Developing a generic resource allocation framework for construction simulation. PhD thesis, University of Alberta, Canada.

Tah, J H M (1989) Integrated microcomputer applications in formwork design. PhD thesis, Loughborough University, UK.

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Taleb, H; Elsebaei, M and El-Attar, M (2019) Enhancing the sustainability of shipping container homes in a hot arid region: A case study of Aswan in Egypt. Architectural Engineering and Design Management, 15(6), pp. 459-474. ISSN 1745-2007

Taleb, H M and Abumoeilak, L (2021) An assessment of different courtyard configurations in urban communities in the United Arab Emirates. Smart and Sustainable Built Environment, 10(1), pp. 67-89. ISSN 2046-6099

Tam, V W Y and Hao, J J L (2014) Prefabrication as a mean of minimizing construction waste on site. International Journal of Construction Management, 14(2), pp. 113-121. ISSN 1562-3599

Tam, V W Y and Zeng, S X (2014) Employee job satisfaction in engineering firms. Engineering, Construction and Architectural Management, 21(4), pp. 353-368. ISSN 0969-9988

Tan, A H (2015) While stands the colosseum: A ground-up exploration of ancient Roman construction techniques using virtual reality. PhD thesis, Ohio State University, USA.

Tan, Y; Xu, W; Chen, K; Deng, C and Wang, P (2024) An interactive and collaborative augmented reality environment for civil engineering education: Steel reinforcement bars teaching as an example. Engineering, Construction and Architectural Management, 31(3), pp. 1100-1122. ISSN 0969-9988

Tandon, U; Mittal, A; Bhandari, H and Bansal, K (2022) E-learning adoption by undergraduate architecture students: Facilitators and inhibitors. Engineering, Construction and Architectural Management, 29(10), pp. 4287-4312. ISSN 0969-9988

Tang, S (2025) Natural language processing (NLP)-based framework for construction quantity take off from building information models. PhD thesis, Western Michigan University, USA.

Tantasavasdi, C; Arttamart, S and Inprom, N (2025) Combined wind catchers and side windows for cross ventilation in row houses. Journal of Engineering, Design and Technology, 23(3), pp. 1039-1056. ISSN 1726-0531

Tatari, O; Castro-Lacouture, D and Skibniewski, M J (2007) Current state of construction enterprise information systems: Survey research. Construction Innovation, 7(4), pp. 310-319. ISSN 1471-4175

Tavakoli, A (1983) Productivity analysis of heavy construction operations. PhD thesis, Georgia Institute of Technology, USA.

Tavakoli, A (1985) Productivity analysis of construction operations. Journal of Construction Engineering and Management, 111(1), pp. 31-39. ISSN 0733-9364

Tavakoli, A and Kakalia, A (1993) MMS: A materials management system. Construction Management and Economics, 11(2), pp. 143-148. ISSN 01446193

Taylor, J; Salmela, A; Täubel, M; Heimlander, A; Karvonen, A M; Pakkala, T; Lahdensivu, J and Pekkanen, J (2023) Risk factors for moisture damage presence and severity in Finnish homes. Buildings & Cities, 4(1), pp. 708-726. ISSN 2632-6655

Taylor, M D; Fisher, A and Wamuziri, S C (2009) A comparison of modern methods of bathroom construction: A project case study. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Teizer, J (2016) Right-time vs real-time pro-active construction safety and health system architecture. Construction Innovation, 16(3), pp. 253-280. ISSN 1471-4175

Tenah, K A (1979) Construction management information control systems (CMICS). PhD thesis, Texas A&M University, USA.

Tennakoon, T M M P; Chileshe, N; Rameezdeen, R; Ochoa, J J and Samaraweera, A (2026) Enhancing supply chain resilience in offsite construction through the procurement strategy: A systematic literature review. Construction Innovation, 26(1), pp. 63-82. ISSN 1471-4175

Tenpierik, M J; Cauberg, J J M and Thorsell, T I (2007) Integrating vacuum insulation panels in building constructions: An integral perspective. Construction Innovation, 7(1), pp. 38-53. ISSN 1471-4175

Teo, H P (1990) Decision support and risk management system for competitive bidding in refurbishment work. PhD thesis, Heriot-Watt University, UK.

Tesfamariam, S (2008) Seismic risk assessment of reinforced concrete buildings using fuzzy based techniques. PhD thesis, University of Ottawa, Canada.

Teshnehdel, S; Soflaei, F and Shokouhian, M (2020) Assessment of solar shading performance of courtyard houses in desert climate of Kashan, Iran. Architectural Engineering and Design Management, 16(6), pp. 473-492. ISSN 1745-2007

Thaesler-Garibaldi, M P (2005) A methodology to develop an integrated engineering system to estimate quantities for bridge repairs at the pre-design stage. PhD thesis, Georgia Institute of Technology, USA.

Thajudeen, S; Elgh, F and Lennartsson, M (2022) A framework supporting mixed production strategies in platform development: A case study in post and beam building system. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Thakare, P and Ravi Sankar V (2024) Advanced pest detection strategy using hybrid optimization tuned deep convolutional neural network. Journal of Engineering, Design and Technology, 22(3), pp. 645-678. ISSN 1726-0531

Thiengburanathum, P (2003) Design of construction production systems: Representation, taxonomy, and design framework. PhD thesis, University of Colorado at Boulder, USA.

Thodelius, C (2018) Rethinking injury events: Explorations in spatial aspects and situational prevention strategies. PhD thesis, Chalmers University of Technology, Sweden.

Thomas, H R and Horman, M J (2006) Fundamental principles of workforce management. Journal of Construction Engineering and Management, 132(1), pp. 97-104. ISSN 0733-9364

Thompson, E T (1997) A rational approach to computer integration in construction. PhD thesis, London South Bank University, UK.

Tian, Z; Yu, Y; Xu, F and Zhang, Z (2023) Dynamic hazardous proximity zone design for excavator based on 3D mechanical arm pose estimation via computer vision. Journal of Construction Engineering and Management, 149(7): 04023048, ISSN 0733-9364

Tokdemir, O B (2003) ALISS: Advanced linear scheduling system. PhD thesis, Illinois Institute of Technology, USA.

Tokede, O. O.; Weththasinghe, K. K.; Kumer Shill, S.; Wijayasundara, M. and Subhani, M. (2025) Comparative evaluation of different material options for moment-resisting framing systems in buildings. Architectural Engineering and Design Management, 21(6), pp. 1541-1561. ISSN 1745-2007

Tokede, O; Boggavarapu, M K and Wamuziri, S (2023) Assessment of building retrofit scenarios using embodied energy and life cycle impact assessment. Built Environment Project and Asset Management, 13(5), pp. 666-681. ISSN 2044-124X

Tomlinson, J (1998) A premises occupancy cost forecasting model. PhD thesis, University of Liverpool, UK.

Tomrukçu, G and Ashrafian, T (2024) Energy-efficient building design under climate change adaptation process: A case study of a single-family house. International Journal of Building Pathology and Adaptation, 42(4), pp. 553-575. ISSN 23984708

Toprakli, A. Y. and Satir, M. S. (2026) Evaluating the impact of gender segregation and egress design on mosque evacuation performance: An abm study. Architectural Engineering and Design Management, 22(2), pp. 402-425. ISSN 1745-2007

Touran, A and Ladick, D R (1989) Application of robotics in bridge deck fabrication. Journal of Construction Engineering and Management, 115(1), pp. 35-52. ISSN 0733-9364

Treloar, G; Fay, R; Love, P E D and Iyer-Raniga, U (2000) Analysing the life-cycle energy of an Australian residential building and its householders. Building Research & Information, 28(3), pp. 184-195. ISSN 0961-3218

Tseng, A A; Tanaka, M; Leeladharan, B and Choi, J G (2003) Rotating laser-based system for full profile measurement. Construction Innovation, 3(2), pp. 97-110. ISSN 1471-4175

Tufah, G D (2020) Building for the common good: the impact of loss aversion and availability error on decision-making in construction projects. Unpublished PhD thesis, Leeds Beckett University, UK.

Tweed, C; Dixon, D; Hinton, E and Bickerstaff, K (2014) Thermal comfort practices in the home and their impact on energy consumption. Architectural Engineering and Design Management, 10(1-2), pp. 1-24. ISSN 1745-2007

Umeokafor, N I (2017) Realities of construction health and safety regulation in Nigeria. PhD thesis, University of Greenwich, UK.

Underwood, J (1995) Integrating design and construction to improve constructability through an effective usage of IT. PhD thesis, University of Salford, UK.

Uniacke, H (2001) Design of a low cost ventilated photovoltaic cladding. PhD thesis, Cardiff University, UK.

Upadhyay, A K and Jain, K (2016) Modularity in nuclear power plants: A review. Journal of Engineering, Design and Technology, 14(3), pp. 526-542.

Uthai, T; Zhou, T; Ye, Y; You, H and Du, J (2025) Haptics-based robot teleoperation for soft object manipulation. Journal of Construction Engineering and Management, 151(5): 04025028, ISSN 0733-9364

Uzun, C and Cangür, R E (2024) An ontological assessment proposal for architectural outputs of generative adversarial network. Construction Innovation, 24(4), pp. 1165-1184. ISSN 1471-4175

Valitabar, M; GhaffarianHoseini, A; GhaffarianHoseini, A and Attia, S (2022) Advanced control strategy to maximize view and control discomforting glare: A complex adaptive façade. Architectural Engineering and Design Management, 18(6), pp. 829-849. ISSN 1745-2007

Vargas, C A (1998) Investigating construction falls using fault tree analysis and developing a prototype tool to reduce falls using expert system and computer-assisted instruction methods. PhD thesis, Ohio State University, USA.

Vargas, G; Lawrence, R and Stevenson, F (2017) The role of lobbies: Short-term thermal transitions. Building Research & Information, 45(7), pp. 759-782. ISSN 0961-3218

Vassigh, S; Davis, D; Behzadan, A H; Mostafavi, A; Rashid, K; Alhaffar, H; Elias, A and Gallardo, G (2020) Teaching building sciences in immersive environments: A prototype design, implementation, and assessment. International Journal of Construction Education and Research, 16(3), pp. 180-196. ISSN 1557-8771

Vaz, D; Al Bizri, S and Gray, C (2008) The management of the design of modern curtain wall cladding systems. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Vecino, G A (2016) The feasibility of using web-based technology for the management of dredging projects. PhD thesis, University of Maryland, College Park, USA.

Venugopal, M (2011) Formal specification of industry foundation class concepts using engineering ontologies. PhD thesis, Georgia Institute of Technology, USA.

Vimpari, J and Junnila, S (2016) Theory of valuing building life-cycle investments. Building Research & Information, 44(4), pp. 345-357. ISSN 0961-3218

Viriyaroj, B; Kuittinen, M and Gheewala, S H (2024) Life-cycle GHG emissions of standard houses in Thailand. Buildings & Cities, 5(1), pp. 247-267. ISSN 2632-6655

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Wade III, L R (2004) Effect of exposure to an inclined surface and height on gait kinematics and postural stability. PhD thesis, Auburn University, USA.

Wafaei Baneh, K; Wafaei Baneh, B; Osman, A; Mostafapour, O and Bradosty, Z R (2023) Regeneration and documentation of historic geometric islamic patterns via HBIM: A case study of Choli minaret, Kurdistan region. International Journal of Building Pathology and Adaptation, 41(2), pp. 347-363. ISSN 23984708

Wagner, E R (2003) Using quality function deployment to achieve a market orientation: An application with wood products companies. PhD thesis, Oregon State University, USA.

Walker, D H T and Rahmani, F (2016) Delivering a water treatment plant project using a collaborative project procurement approach. Construction Innovation, 16(2), pp. 158-184. ISSN 1471-4175

Wall, C M (2004) New ways of building: Architects, operatives and industrialised production in britain 1940-70. PhD thesis, University of Cambridge, UK.

Wall, J; Carney, M; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E; Önwy-Yazici, E and Jordan, A (2007) The delivery of health and safety training applying multiple intelligences using virtual classes. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Walsh, K D; Hershauer, J C; Tommelein, I D and Walsh, T A (2004) Strategic positioning of inventory to match demand in a capital projects supply chain. Journal of Construction Engineering and Management, 130(6), pp. 818-826. ISSN 0733-9364

Wan, M.; Li, L.; Yuan, M. and Yin, X. (2026) Modeling stakeholder-associated risk networks in the life cycle of building-integrated photovoltaic projects. Engineering, Construction and Architectural Management, 33(7), pp. 5469-5494. ISSN 0969-9988

Wandahl, S and Skovbogaard, J (2017) Towards improving productivity on refurbishment projects. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Wang, C; Shen, W; Cui, B and Zeng, Y (2025) Numerical study on the thermal environment of the vertical greening system based on infrared thermal imaging. Architectural Engineering and Design Management, 21(2), pp. 315-337. ISSN 1745-2007

Wang, H (2021) BIM-based knowledge management for the use of construction and facilities management knowledge in construction projects. PhD thesis, Queen's University Belfast, UK.

Wang, H; Yi, W; Zhen, L and Chan, A P C (2024) Cost-optimized transport planning for prefabricated modules with the implementation of the just-in-time strategy. Journal of Construction Engineering and Management, 150(8): 04024093, ISSN 0733-9364

Wang, H; Yi, W; Zhen, L; Song, Y and Wu, P (2025) Designing optimal government-contractor subsidy policy for promoting modular construction: Bilevel stochastic program. Journal of Construction Engineering and Management, 151(10): 04025136, ISSN 0733-9364

Wang, J; Wang, G; Li, H; Han, S and Zhang, J (2024) Intelligent construction activity identification for all-weather site monitoring using 4D millimeter-wave technology. Journal of Construction Engineering and Management, 150(11): 04024150, ISSN 0733-9364

Wang, M; Yao, G; Yang, Y; Li, R and Deng, R (2025) A decision support tool for dust prevention and control in construction. Journal of Construction Engineering and Management, 151(5): 04025037, ISSN 0733-9364

Wang, X (2022) Enabling human-robot partnerships in digitally-driven construction work through integration of building information models, interactive virtual reality, and process-level digital twins. PhD thesis, University of Michigan, USA.

Wang, X (2024) Context-aware worker intent interpretation for human-robot collaboration in construction. PhD thesis, University of Wisconsin - Madison, USA.

Wang, Y (2022) Monitoring, modelling and analysis of occupants' operation of windows, use of air purifiers and smart air quality control in low-energy residential buildings. PhD thesis, University College London, UK.

Wang, Y; Lin, M; Xu, K; Zhang, S and Ma, H (2021) Energy consumption analysis of glass house using electrochromic window in the subtropical region. Journal of Engineering, Design and Technology, 19(1), pp. 203-218. ISSN 1726-0531

Wang, Zhichen (2025) Framework for automated change propagation from building information models to building energy models. PhD thesis, Carnegie Mellon University, USA.

Warszawski, A and Sangrey, D A (1985) Robotics in building construction. Journal of Construction Engineering and Management, 111(3), pp. 260-280. ISSN 0733-9364

Wasilewski, S and Andersen, M (2025) Exploring interactions between shading and view using visual difference prediction. Buildings & Cities, 6(1), pp. 281-293. ISSN 2632-6655

Weerasinghe, A S; Ramachandra, T and Nawarathna, A (2019) Effects of green retrofits: A case of industrial manufacturing buildings in Sri Lanka. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Wei, Y (2019) Data-driven approaches for analysis of building energy consumption and indoor occupancy behavior. PhD thesis, University of Nottingham, UK.

Wei, Y; Choi, H and Lei, Z (2022) A generative design approach for modular construction in congested urban areas. Smart and Sustainable Built Environment, 11(4), pp. 1163-1181. ISSN 2046-6099

Weiss, T (2021) Energy flexibility and shiftable heating power of building components and technologies. Smart and Sustainable Built Environment, 10(4), pp. 740-758. ISSN 2046-6099

Welch, J A (2024) Ancient Maya labor relations: Constructing a palace at Ucanha, Yucatán, Mexico. PhD thesis, Yale University, USA.

Wennstroem, A; Havenvid, M I; Eriksson, P E and Larsson, J (2023) Incentivising supplier innovation in mega infrastructure projects: Exploring the result of innovation bonuses. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Westberg, K; Norén, J and Kus, H (2001) On using available environmental data in service life estimations. Building Research & Information, 29(6), pp. 428-439. ISSN 0961-3218

Westerholm, N.; Tuure, A.; Pajunen, S. and Kuittinen, M. (2026) Comparing technical disassembly potential methods for concrete and timber buildings. Buildings & Cities, 7(1), pp. 633-652. ISSN 2632-6655

White, T; Ariaratnam, S T and Michael, J (2012) Subterranean infrastructure reconnaissance for manmade and natural hazards and disasters. International Journal of Disaster Resilience in the Built Environment, 3(1), pp. 66-86. ISSN 1759-5916

Whittaker, S and Jespersen, K (2022) Stretching or conforming? Financing urban climate change adaptation in Copenhagen. Buildings & Cities, 3(1), pp. 974-999. ISSN 2632-6655

Wickramasinghe, V; Dias, P; Robert, D and Setunge, S (2024) From physical degradation condition ratings of building elements to lost value ratio bands. Built Environment Project and Asset Management, 14(6), pp. 858-873. ISSN 2044-124X

Widyarta, Mohammad (2025) Edifices as conduit: Indonesian and foreign agencies in the production of post-independence buildings. PhD thesis, University of New South Wales, Australia.

Wiik, M K (2025) Developing whole-life carbon benchmark values for Norwegian buildings. Building Research & Information, 53(3), pp. 345-358. ISSN 0961-3218

Williams, A (2004) Industry engagement in uk built environment higher education courses. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Williams, T (2013) The management of renewable energy technologies implementations within a contracting organisation's processes. EngD thesis, Loughborough University, UK.

Winn, K R (2014) Inter-scalar multivariable decision making framework for the architectural envelope. PhD thesis, Rensselaer Polytechnic Institute, USA.

Wise, F; Moncaster, A and Jones, D (2021) Rethinking retrofit of residential heritage buildings. Buildings & Cities, 2(1), pp. 495-517. ISSN 2632-6655

Wong, Francis Michael Wai-Ling (1965) The relation between cost, performance and comfort conditions in 58 office buildings in Sydney. PhD thesis, University of Sydney, Australia.

Wong, I L; Perera, S and Eames, P C (2010) Goal directed life cycle costing as a method to evaluate the economic feasibility of office buildings with conventional and TI-façades. Construction Management and Economics, 28(7), pp. 715-735. ISSN 1466433X

Wong, J K W; Bameri, F; Ahmadian Fard Fini, A and Maghrebi, M (2025) Tracking indoor construction progress by deep-learning-based analysis of site surveillance video. Construction Innovation, 25(2), pp. 461-489. ISSN 1471-4175

Wong, M O; Zhang, Z and Pan, W (2024) Multiuser virtual reality-enabled collaborative heavy lift planning in construction. Journal of Construction Engineering and Management, 150(4): 04024022, ISSN 0733-9364

Wong Chong, Oscar (2022) IFC-based system and methods to support analysis of robot-assisted offsite construction. PhD thesis, Purdue University, USA.

Wu, Z.; Park, A.; Awada, M. and Assaad, R. H. (2026) School building conditions and chronic absenteeism within socioeconomic contexts: A component-level statistical analysis in New York state. Engineering, Construction and Architectural Management, 33(15), pp. 432-457. ISSN 0969-9988

Wu, H; Han, Y; Zhang, M; Abebe, B D; Legesse, M B and Jin, R (2023) Identifying unsafe behavior of construction workers: A dynamic approach combining skeleton information and spatiotemporal features. Journal of Construction Engineering and Management, 149(11): 04023115, ISSN 0733-9364

Wu, R (2002) Computer -aided dimensional control in building construction. PhD thesis, Eindhoven University of Technology, Netherlands.

Wu, X; Tian, Z; Tian, C; Wang, Y and Li, J (2019) New design-day method for building cooling load calculation in China. Building Research & Information, 47(8), pp. 901-911. ISSN 0961-3218

Wu, Z and Ma, G (2023) Automatic generation of BIM-based construction schedule: Combining an ontology constraint rule and a genetic algorithm. Engineering, Construction and Architectural Management, 30(10), pp. 5253-5279. ISSN 0969-9988

Wuni, I Y and Mazher, K M (2024) Ending the suitability quantification dilemma: Intelligent decision support system for modular integrated construction in a high-density metropolis. Construction Innovation, 24(4), pp. 1026-1047. ISSN 1471-4175

Wuni, I Y and Shen, G Q (2020) Critical success factors for modular integrated construction projects: A review. Building Research & Information, 48(7), pp. 763-784. ISSN 0961-3218

Wuni, I Y and Shen, G Q (2020) Critical success factors for management of the early stages of prefabricated prefinished volumetric construction project life cycle. Engineering, Construction and Architectural Management, 27(9), pp. 2315-2333. ISSN 0969-9988

Wuni, I Y; Shen, G Q and Osei-Kyei, R (2020) Evaluating the critical success criteria for prefabricated prefinished volumetric construction projects. Journal of Financial Management of Property and Construction, 26(2), pp. 279-297. ISSN 1366-4387

Wuni, I Y; Shen, G Q and Osei-Kyei, R (2022) Quantitative evaluation and ranking of the critical success factors for modular integrated construction projects. International Journal of Construction Management, 22(11), pp. 2108-2120. ISSN 1562-3599

Wuni, I Y; Shen, G Q and Saka, A B (2023) Computing the severities of critical onsite assembly risk factors for modular integrated construction projects. Engineering, Construction and Architectural Management, 30(5), pp. 1864-1882. ISSN 0969-9988

Xiao, Peichun (2018) Development of colletive intelligence for building energy efficiency. PhD thesis, University of New South Wales, Australia.

Xiong, Yunjie (2020) A BIM-based interoperability platform in support of building operation and energy management. PhD thesis, Virginia Tech, USA.

Xu, C.; Zhou, H.; Li, H.; Zhang, Z. and Li, P. (2026) A low-cost automatic indoor measurement device with multisensor fusion. Journal of Construction Engineering and Management, 152(6): 04026068, ISSN 0733-9364

Xu, J; Teng, Y and Pan, W (2021) A BIM-LCA integrated method for enhancing efficiency of embodied carbon estimation of prefabricated high-rise buildings. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Xu, T; Tiong, R L K; Chew, D A S and Smith, N J (2005) Development model for competitive construction industry in the people's republic of China. Journal of Construction Engineering and Management, 131(7), pp. 844-853. ISSN 0733-9364

Xu, W and Wang, T K (2023) Construction worker safety prediction and active warning based on computer vision and the gray absolute decision analysis method. Journal of Construction Engineering and Management, 149(4): 04023014, ISSN 0733-9364

Yang, J (2022) Integrated decision support system for the selection and implementation of delay analysis in construction projects. PhD thesis, Illinois Institute of Technology, USA.

Yang, M L; Chen, S J and Chen, S T (2006) Innovative central opening strut system for foundation excavation. Journal of Construction Engineering and Management, 132(1), pp. 58-66. ISSN 0733-9364

Yang, R J and Zou, P X W (2016) Building integrated photovoltaics (BIPV): Costs, benefits, risks, barriers and improvement strategy. International Journal of Construction Management, 16(1), pp. 39-53. ISSN 1562-3599

Yang, S; Guan, T; Wang, J; Wang, X and Ren, B (2025) Label scarcity- and class imbalance-aware current-based pipeline for concrete vibration activity recognition. Journal of Construction Engineering and Management, 151(10): 04025135, ISSN 0733-9364

Yang, Y; Pan, M and Pan, W (2022) Integrated offsite logistics scheduling approach for high-rise modular building projects. Journal of Construction Engineering and Management, 148(6): 04022032, ISSN 0733-9364

Yang, Y and Pan, W (2021) Automated guided vehicles in modular integrated construction: potentials and future directions. Construction Innovation, 21(1), pp. 85-104. ISSN 1471-4175

Yang, Z and Lu, W (2024) Lean modular integrated construction production phase planning under uncertainties: A big data-driven optimization approach. Journal of Construction Engineering and Management, 150(6): 04024048, ISSN 0733-9364

Yang, Z R (1997) UK construction company failure prediction: Robust heteroscedastic parzen window classifier. PhD thesis, University of Portsmouth, UK.

Yapa Mudiyanselage, S. D. Y. B.; Perera, B. A. K. S. and Kavirathna, A. S. (2026) Adaptability of design out waste concept to minimise waste in modular construction: A qualitative delphi study. Smart and Sustainable Built Environment, pp. 1-33. ISSN 2046-6099

Yau, N-J (1992) An object-oriented project model for integrating building design, construction scheduling, and cost estimating for mid-rise construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Ye, Y; Xia, P; Zhou, T and Du, J (2023) Spatial memory of BIM and virtual reality: Mental mapping study. Journal of Construction Engineering and Management, 149(7): 04023042, ISSN 0733-9364

Yee, Tiew Si (2024) Developing a building contract administration framework for graduate architects managing housing projects. PhD thesis, University of Malaya, Malaysia.

Yemoh, O O; Opoku, R; Takyi, G; Adomako, E K; Uba, F and Obeng, G (2025) Green building adaptation in hot-humid climates: Assessment of coconut and corn husk fiber composite bricks as energy-efficient building envelopes. International Journal of Building Pathology and Adaptation, 43(6), pp. 1522-1540. ISSN 2398-4708

Yi, H (2022) 4D-printed parametric façade in architecture: Prototyping a self-shaping skin using programmable two-way shape memory composite (twsmc). Engineering, Construction and Architectural Management, 29(10), pp. 4132-4152. ISSN 0969-9988

Yildiz, S and Güneş, S (2026) Establishing a model for the selection of building materials: An application for roof coverings. International Journal of Construction Management, 26(4), pp. 718-733. ISSN 1562-3599

Yilmaz, N and Donaldson, A B (2005) Consideration of wind barriers for an inner courtyard. Architectural Engineering and Design Management, 1(4), pp. 281-293. ISSN 1745-2007

Yong, G; Liu, M and Lee, S (2026) Pose-aware image captioning for ergonomic problem and solution identification. Journal of Construction Engineering and Management, 152(5): 04026043, ISSN 0733-9364

Yoo, J.; Hwang, S.; Seo, J. and Choi, B. (2026) Feasibility of a wearable 360° camera for personalized proximity warning on construction sites. Journal of Construction Engineering and Management, 152(6): 04026079, ISSN 0733-9364

Yoon, S; Kang, K; Yoon, Y; Hastak, M and Ji, R (2018) Systematic decision-making process for composite pavement maintenance. Journal of Construction Engineering and Management, 144(6): 04018044, ISSN 0733-9364

You, H; Zhou, T; Wu, J and Du, J (2026) Tebi-llama: Temporal binding foundation model for material property recognition via tactile sequence perception. Journal of Construction Engineering and Management, 152(4): 04026024, ISSN 0733-9364

Young, B; Harty, C; Lu, S L and Davies, R (2015) Developing temporary manufacturing facilities for residential building: A case of the modern flying factory. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Yu, B (2013) Environmental implications of pavements: A life cycle view. PhD thesis, University of South Florida, USA.

Yu, G; Li, Z; Zeng, R; Jin, Y; Hu, M and Sugumaran, V (2025) Predicting structure performance of urban critical infrastructure: An augmented attention-based LSTM model. Engineering, Construction and Architectural Management, 32(6), pp. 3914-3936. ISSN 0969-9988

Yun, G Y (2008) Occupant behaviour in buildings: Thermal performance implications of window use patterns. PhD thesis, University of Cambridge, UK.

Yun, G Y; Steemers, K and Baker, N (2008) Natural ventilation in practice: Linking facade design, thermal performance, occupant perception and control. Building Research & Information, 36(6), pp. 608-624. ISSN 0961-3218

Yunus, N B (1988) Toward the development of a knowledge-based construction schedule planning system. PhD thesis, University of Missouri - Rolla, USA.

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Yıldız, B; Çağdaş, G and Zincir, I (2024) Architectural space classification considering topological and 3D visual spatial relations using machine learning techniques. Building Research & Information, 52(1-2), pp. 68-86. ISSN 0961-3218

Zaayman, L (2017) Optimisation of mechanised maintenance management of railway track infrastructure. PhD thesis, University of Johannesburg, South Africa.

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zalejska Jonsson, A and Hungria Gunnelin, R (2019) Defects in newly constructed residential buildings: Owners' perspective. International Journal of Building Pathology and Adaptation, 37(2), pp. 163-185. ISSN 23984708

Zaneldin, E (2000) An information model for improving design coordination in building projects. PhD thesis, University of Waterloo, Canada.

Zanelli, A; Kolo, E; Monticelli, C; Rosina, E; Poli, T; Speroni, A; Mainini, A G and Cadena, J D B (2021) A removable textile hybrid structural screen for the windows of castello sforzesco, milan: When experimental metrics inform the bespoke 'design-to-construction' process in historical contexts. Architectural Engineering and Design Management, 17(3-4), pp. 196-215. ISSN 1745-2007

Zarei, F and Nik-Bakht, M (2024) Extending CityGML with public input: social ADE. Built Environment Project and Asset Management, 14(4), pp. 547-561. ISSN 2044-124X

Zeng, R; Chini, A; Srinivasan, R S and Jiang, P (2017) Energy efficiency of smart windows made of photonic crystal. International Journal of Construction Management, 17(2), pp. 100-112. ISSN 1562-3599

Zeng, R; Shi, J J S; Wang, C and Lu, T (2024) Integrating as-built BIM model from point cloud data in construction projects. Engineering, Construction and Architectural Management, 31(9), pp. 3557-3574. ISSN 0969-9988

Zhai, Y (2022) Evaluation for optimisation: Design for assembly in panel construction. PhD thesis, The Chinese University of Hong Kong, Hong Kong.

Zhai, Y; Sun, Y; Li, Y and Tang, S (2025) Design for assembly in construction system: Three iterative upgrades of a panelized system. Architectural Engineering and Design Management, 21(3), pp. 410-429. ISSN 1745-2007

Zhang, J.; Wang, Y.; Wang, R. D.; Li, X.; Zhang, Z. and Yang, Z. (2026) A multitower crane layout planning framework for modular integrated construction considering material relay handling. Journal of Construction Engineering and Management, 152(8): 04026109, ISSN 0733-9364

Zhang, L. and Ge, Q. (2026) Offsite construction risk management agent: A gpts based analysis model. Engineering, Construction and Architectural Management, 33(7), pp. 5625-5644. ISSN 0969-9988

Zhang, F; Liu, H; Chen, Z; Wang, L; Zhang, Q and Guo, L (2024) Collision risk warning model for construction vehicles based on YOLO and DeepSORT algorithms. Journal of Construction Engineering and Management, 150(6): 04024053, ISSN 0733-9364

Zhang, F; Liu, H; Wang, L; Chen, Z; Zhang, Q and Guo, L (2025) State awareness and collision risk assessment algorithm for tower crane based on bidirectional inverse perspective mapping and skeleton key points. Journal of Construction Engineering and Management, 151(2): 04024205, ISSN 0733-9364

Zhang, H; Li, H and Lu, M (2008) Modeling time-constraints in construction operations through simulation. Journal of Construction Engineering and Management, 134(7), pp. 545-554. ISSN 0733-9364

Zhang, H and Tam, C M (2005) Consideration of break in modeling of construction processes. Engineering, Construction and Architectural Management, 12(4), pp. 373-390. ISSN 0969-9988

Zhang, L; Dai, G; Zou, X and Qi, J (2020) Robustness-based multi-objective optimization for repetitive projects under work continuity uncertainty. Engineering, Construction and Architectural Management, 27(10), pp. 3095-3113. ISSN 0969-9988

Zhang, L and El-Gohary, N (2023) Human-centred and BIM-integrated automated value analysis of buildings. International Journal of Construction Management, 23(11), pp. 1911-1923. ISSN 1562-3599

Zhang, M; Cao, Z; Yang, Z and Zhao, X (2020) Utilizing computer vision and fuzzy inference to evaluate level of collision safety for workers and equipment in a dynamic environment. Journal of Construction Engineering and Management, 146(6): 04020051, ISSN 0733-9364

Zhang, N (2001) A computer-based environment for preliminary structural design, design collaboration and design automation of tall buildings. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Zhang, S (2022) The development of a low carbon prefabricated house. PhD thesis, University of Nottingham, UK.

Zhang, S; Pan, F; Wang, C; Sun, Y and Wang, H (2017) BIM-based collaboration platform for the management of EPC projects in hydropower engineering. Journal of Construction Engineering and Management, 143(12): 04017087, ISSN 0733-9364

Zhang, X; Sexton, M G; Goulding, J S; Aouad, G and Kagioglou, M (2005) Performance modelling for the design of a hybrid concrete structural frame. Architectural Engineering and Design Management, 1(2), pp. 83-91. ISSN 1745-2007

Zhang, Y (2009) Research on hydraulic engineering construction management decision support system based on network analysis method (in Chinese). PhD thesis, Beijing University of Aeronautics and Astronautics, China.

Zhang, Y; Wang, J; Ahmad, R and Li, X (2022) Integrating lean production strategies, virtual reality technique and building information modeling method for mass customization in cabinet manufacturing. Engineering, Construction and Architectural Management, 29(10), pp. 3970-3996. ISSN 0969-9988

Zhang, Z; Pan, W and Pan, M (2022) Critical considerations on tower crane layout planning for high-rise modular integrated construction. Engineering, Construction and Architectural Management, 29(7), pp. 2615-2634. ISSN 0969-9988

Zhang, Z J; Li, M G; Chen, J J; Wang, J H and Zeng, F Y (2017) Innovative construction method for oversized excavations with bipartition walls. Journal of Construction Engineering and Management, 143(8): 04017056, ISSN 0733-9364

Zhao, G; Wang, M and Zhang, J (2025) Research on the decision-making of neighborhood renewal projects based on low-carbon technology. Engineering, Construction and Architectural Management, 32(12), pp. 8171-8195. ISSN 0969-9988

Zhao, H (2017) Distributed building information modeling in multidisciplinary collaboration. DSc thesis, ETH Zürich, Switzerland.

Zhao, J; Cao, Y and Xiang, Y (2024) Pose estimation method for construction machine based on improved alphapose model. Engineering, Construction and Architectural Management, 31(3), pp. 976-996. ISSN 0969-9988

Zhao, S and De Angelis, E (2020) Reducing mould risk during the building design stage: Case studies in South-East China. Journal of Construction in Developing Countries, 25(1), pp. 1-20. ISSN 1823-6499

Zheng, Z; Li, Y and Torres, J (2024) An integrated method of automated layout design and optimization for modular construction. Engineering, Construction and Architectural Management, 31(3), pp. 1016-1036. ISSN 0969-9988

Zhong, Q (1998) Building process modelling using product modelling methodology and its application to scheduling. PhD thesis, National University of Singapore, Singapore.

Zhong, Y (2013) Decision support system for the selection of structural frame material to achieve sustainability and constructability. PhD thesis, National University of Singapore, Singapore.

Zhong, Y; Ling, F Y Y and Wu, P (2017) Using multiple attribute value technique for the selection of structural frame material to achieve sustainability and constructability. Journal of Construction Engineering and Management, 143(2): 04016098, ISSN 0733-9364

Zhou, H W; Zhou, Y H and Zhao, C J (2016) Fault-response mechanism of production system in concrete-dam-construction simulation. Journal of Construction Engineering and Management, 142(11): 04016065, ISSN 0733-9364

Zhou, S (2024) Platforming for industrialized building: a comparative case study of digitally-enabled product platforms. Building Research & Information, 52(1-2), pp. 4-18. ISSN 0961-3218

Zhou, Y (2012) Construction knowledge mining and application of generalized fuzzy network in construction decision management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Zhou, Y; Wang, D; Liu, G; Wang, J and Li, K (2017) A method for tenant selection of China's construction industrial parks through industrial symbiosis. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Zhu, X.; Ma, J.; Chen, W. and Tan, Y. (2026) Llm-querybc: An llm-based regulation query system for textual and tabular information in building codes. Journal of Construction Engineering and Management, 152(6): 04026075, ISSN 0733-9364

Zhu, Q; Zhou, T; Xia, P and Du, J (2022) Robot planning for active collision avoidance in modular construction: Pipe skids example. Journal of Construction Engineering and Management, 148(10): 04022114, ISSN 0733-9364

Zhu, X (2023) Machine learning supported multiple criteria decision making for project delivery system selection. PhD thesis, Queen's University Belfast, UK.

Zoleykani, M. J. and Abbasianjahromi, H. (2026) Integrating ar and 4D-BIM for dynamic hazard management in construction projects. International Journal of Construction Management, 26(7), pp. 1239-1263. ISSN 1562-3599

Zolfagharian, S and Irizarry, J (2017) Constructability assessment model for commercial building designs in the United States. Journal of Construction Engineering and Management, 143(8): 04017031, ISSN 0733-9364

da Rocha, C G and Kemmer, S (2018) Integrating product and process design in construction. Construction Management and Economics, 36(9), pp. 535-543. ISSN 01446193

de Silva, N; Ranasinghe, M and de Silva, C R (2013) Use of ANNs in complex risk analysis applications. Built Environment Project and Asset Management, 3(1), pp. 123-140. ISSN 2044-124X

van Stijn, A (2023) Developing circular building components: Between ideal and feasible. PhD thesis, Delft University of Technology, Netherlands.

van Stijn, A and Gruis, V (2020) Towards a circular built environment: An integral design tool for circular building components. Smart and Sustainable Built Environment, 9(4), pp. 635-653. ISSN 2046-6099

van den Berg, J; Appel-Meulenbroek, R; Kemperman, A and Sotthewes, M (2020) Knowledge workers' stated preferences for important characteristics of activity-based workspaces. Building Research & Information, 48(7), pp. 703-718. ISSN 0961-3218

zhao, X. and lu, R. (2025) Dynamic scheduling optimization model and algorithm for linear projects considering local rescheduling. Engineering, Construction and Architectural Management, 33(5), pp. 4019-4045. ISSN 0969-9988

Çankaya Topak, S (2024) Conforming to future changes in buildings: A component-oriented detailing strategy. PhD thesis, Middle East Technical University, Turkey.

Çepni, M. S.; Kutluca, A. K.; Salihoğlu, T.; Atmaca, A. and Mintemur, S. (2026) Changing land-use metrics in mass housing: Türkiye case study. Buildings & Cities, 7(1), pp. 541-558. ISSN 2632-6655

Özer, S and Jacoby, S (2022) Dwelling size and usability in London: A study of floor plan data using machine learning. Building Research & Information, 50(6), pp. 694-708. ISSN 0961-3218