Items with Subject: air quality

Abanomi, W M (2005) Environmental design of prototype school buildings in hot, arid regions with special reference to Riyadh, Saudi Arabia. PhD thesis, Cardiff University, UK.

Abas, M; Khattak, S B; Habib, T and Nadir, U (2022) Assessment of critical risk and success factors in construction supply chain: A case of Pakistan. International Journal of Construction Management, 22(12), pp. 2258-2266. ISSN 1562-3599

Abbas, G. M.; Meral Akgül, Ç and Dino, I. G. (2025) Resilient cooling of the Mediterranean office spaces under climate change. Architectural Engineering and Design Management, 21(6), pp. 1165-1186. ISSN 1745-2007

Abdalazeem, M E; Hassan, H; Asawa, T and Mahmoud, H (2024) Green roofs and thermal comfort: A comparative study of soil layers' seasonal thermal performance integrated with ventilation in hot climate. Architectural Engineering and Design Management, 20(2), pp. 358-389. ISSN 1745-2007

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelmageed, S; Abdelkhalek, S I F M; Hussien, M and Zayed, T (2024) A hybrid simulation model for modules installation in modular integrated construction projects. International Journal of Construction Management, 24(13), pp. 1407-1418. ISSN 1562-3599

Abdi, A (2014) Efficient winter road maintenance: A study of technical and contractual issues. PhD thesis, KTH Royal Institute of Technology, Sweden.

Abdi, A; Lind, H and Birgisson, B (2013) Payment mechanisms for winter road maintenance services. Construction Economics and Building, 13(4), pp. 18-31. ISSN 2204-9029

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Abdulai, S F; Zayed, T; Taiwo, R and Ali, A H (2025) Hybrid statistical analysis of critical alignment factors in modular integrated construction. Journal of Construction Engineering and Management, 151(9): 04025129, ISSN 0733-9364

Abdulghafour, A B (1998) Modeling highway construction tasks to determine project duration. PhD thesis, University of Tennessee, USA.

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

AbouRizk, S M and Wales, R J (1997) Combined discrete-event/continuous simulation for project planning. Journal of Construction Engineering and Management, 123(1), pp. 11-20. ISSN 0733-9364

Abourizk, S M; Halpin, D W and Wilson, J R (1994) Fitting beta distributions based on sample data. Journal of Construction Engineering and Management, 120(2), pp. 288-305. ISSN 0733-9364

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Adams, K A (2023) A multi-hazard cascading risk model for coastal rail infrastructure: numerical modelling & engineering failure analysis. PhD thesis, Brunel University, UK.

Ade, R; Rehm, M and Vishnupriya, V (2024) A wintertime thermal analysis of New Zealand Homestar certified apartments for older people. Building Research & Information, 52(6), pp. 680-692. ISSN 0961-3218

Adebisi, J and McArthur, J J (2025) HVAC characterisation of existing Canadian buildings for decarbonisation retrofit identification. Buildings & Cities, 6(1), pp. 729-746. ISSN 2632-6655

Adedeji, J A; Fadamiro, J A and Odeyale, T O (2020) Design toolkits for campus open spaces from post-occupancy evaluations of federal universities in South-West Nigeria. Built Environment Project and Asset Management, 10(2), pp. 296-311. ISSN 2044-124X

Adekunle, T O (2019) Summer performance, comfort, and heat stress in structural timber buildings under moderate weather conditions. Smart and Sustainable Built Environment, 8(3), pp. 220-242. ISSN 2046-6099

Adekunle, T O (2020) Occupants' comfort and stress indices in a structural timber school building in the Northeast US in different seasons. Building Research & Information, 48(3), pp. 331-348. ISSN 0961-3218

Adeosun, F E and Oke, A E (2024) Examining the awareness and usage of cyber physical systems for construction projects in Nigeria. Journal of Engineering, Design and Technology, 22(1), pp. 281-294. ISSN 1726-0531

Agbo, E A; Izam, Y D and Ayegba, C (2022) Quantifying the impact of work environment factors on the variability of labour productivity in wall plastering. Journal of Construction in Developing Countries, 27(2), pp. 109-125. ISSN 1823-6499

Aghili, S. A.; Khanzadi, M.; Haji Mohammad Rezaei, A. and Rahbar, M. (2026) Data-driven approach to fault detection for hospital HVAC system. Smart and Sustainable Built Environment, 15(2), pp. 765-788. ISSN 2046-6099

Aguilar, A J; de la Hoz-Torres, M L; Oltra-Nieto, L; Ruiz, D P and Martínez-Aires, M D (2022) Impact of COVID-19 protocols on IEQ and students' perception within educational buildings in southern Spain. Building Research & Information, 50(7), pp. 755-770. ISSN 0961-3218

Agyakwa-Baah, A and Chileshe, N (2010) Construction professionals perception of risk assesssment and management practices: Does length of service in construction industry matter. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ahmadi Esfahani, N and Shahandashti, M (2020) Post-hazard labor wage fluctuations: A comparative empirical analysis among different sub-sectors of the U.S. Construction sector. Journal of Financial Management of Property and Construction, 25(3), pp. 313-330. ISSN 1366-4387

Ahmed, V; Saboor, S; Almarzooqi, F A; Alshamsi, H A; Alketbi, M A and Al Marei, F A (2021) A comparative study of energy performance in educational buildings in the UAE. Construction Economics and Building, 21(3), pp. 33-57. ISSN 2204-9029

Ahuja, H N and Nandakumar, V (1985) Simulation model to forecast project completion time. Journal of Construction Engineering and Management, 111(4), pp. 325-342. ISSN 0733-9364

Ajayi, O O; Koleoso, H; Ajayi, M and Faremi, O (2019) Maintenance performance of prison facilities in Southwestern Nigeria. Journal of Construction Business and Management, 3(2), pp. 26-34. ISSN 2521-0165

Akeila, M; Preece, C and Kuok, K K K (2021) Evaluating the environmental performance of 3D printed shelters in Jordan. Journal of Construction in Developing Countries, 26(2), pp. 117-134. ISSN 1823-6499

Akin, S; Eghbali, A; Nwagwu, C and Hertwich, E (2025) Western Asian and Northern African residential building stocks: archetype analysis. Buildings & Cities, 6(1), pp. 219-238. ISSN 2632-6655

Al Omari, Mohammad K (2025) Application of the AI-enabled unmanned aerial systems in resolving highway construction claims. PhD thesis, University of Illinois at Chicago, USA.

Al Sanad, S A (2014) The promotion of sustainable construction practices in Kuwait. PhD thesis, University of Manchester, UK.

Al-Aomar, R; AlTal, M and Abel, J (2024) A data-driven predictive maintenance model for hospital HVAC system with machine learning. Building Research & Information, 52(1-2), pp. 207-224. ISSN 0961-3218

Al-Khatri, H; Etri, T and Gadi, M B (2022) User response to indoor thermal environment in female high school buildings in Oman. Building Research & Information, 50(1-2), pp. 192-212. ISSN 0961-3218

Al-Refaie, A; Alashwal, A; Abdul-Samad, Z; Salleh, H and Elshafie, A (2023) Evaluation of weather-productivity models of construction labour for tropics. Built Environment Project and Asset Management, 13(2), pp. 238-252. ISSN 2044-124X

Al-saeed, Y W; Ahmed, A and Pärn, E A (2020) An 80-year projection of nZEB strategies in extreme climatic conditions of Iraq. International Journal of Building Pathology and Adaptation, 38(3), pp. 472-492. ISSN 23984708

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Ali, F M M and Jones, K (2013) Negotiating community resilience in the city in a time of political change and deficit reduction. International Journal of Disaster Resilience in the Built Environment, 4(1), pp. 9-22. ISSN 1759-5916

Alinaitwe, H; Nyamutale, W and Tindiwensi, D (2014) Design phase constructability improvement strategies for highway projects in Uganda. Journal of Construction in Developing Countries, 19(1), pp. 127-140. ISSN 1823-6499

Almalki, M (2024) Accelerated wastewater pipeline construction. PhD thesis, Syracuse University, USA.

Almomani, A Q M; Almeida, R M S F; Vicente, R and Barreira, E (2025) Long-term monitoring of thermal comfort in three apartments in Jordan. Building Research & Information, 53(8), pp. 965-982. ISSN 0961-3218

Alnaser, N W (2010) Utilisation of solar and wind energy in buildings in the Kingdom of Bahrain: a step towards sustainable building construction. PhD thesis, University of Reading, UK.

Alothaimeen, I (2018) Multi-objective optimization for LEED: New construction using genetic algorithms. PhD thesis, Illinois Institute of Technology, USA.

Alrefaie, A M; Abdul-Samad, Z; Salleh, H; Alashwal, A M and Amos, D (2023) Modelling labour productivity of reinforcement bar using polynomial regression: A study on a tropical country's weather. International Journal of Construction Management, 23(10), pp. 1633-1641. ISSN 1562-3599

Alshboul, O; Shehadeh, A and Tamimi, M (2025) Sustainability-focused pavement management under climate variability. Journal of Construction Engineering and Management, 151(7): 04025076, ISSN 0733-9364

Alvanchi, A; Bajalan, Z and Iravani, P (2021) Emission assessment of alternative dam structure types, a novel approach to consider in new dam projects. Construction Innovation, 21(2), pp. 203-217. ISSN 1471-4175

Alvanchi, A and JavadiAghdam, S (2019) Job site weather index: an indicator for open environment construction projects. Construction Innovation, 19(1), pp. 110-124. ISSN 1471-4175

Alves, T d C L (2005) Buffering practices in HVAC ductwork supply chains. PhD thesis, University of California, Berkeley, USA.

Alzaed, A (2012) User centered passive building design. PhD thesis, University of Liverpool, UK.

Alzahrani, H; Arif, M; Kaushik, A; Goulding, J and Heesom, D (2021) Artificial neural network analysis of teachers' performance against thermal comfort. International Journal of Building Pathology and Adaptation, 39(1), pp. 20-32. ISSN 23984708

Alzahrani, H; Arif, M; Kaushik, A K; Rana, M Q and Aburas, H M (2023) Evaluating the effects of indoor air quality on teacher performance using artificial neural network. Journal of Engineering, Design and Technology, 21(2), pp. 604-618. ISSN 1726-0531

Amadi, A I (2021) A back-end view to climatic adaptation: Partitioning weather-induced cement demand variance in wet humid environment. International Journal of Building Pathology and Adaptation, 39(2), pp. 153-174. ISSN 23984708

Amirkhani, S (2022) Minimum energy efficiency standard (MEES) requirements and the impact on the UK hotel buildings stock. PhD thesis, University of West London, UK.

Ammar, M A and Samy, M (2015) Learning curve modelling of gas pipeline construction in Egypt. International Journal of Construction Management, 15(3), pp. 229-238. ISSN 1562-3599

Amorim, Adriana Eloa Bento (2020) Construction workers remote estimate of the wbgt index in outdoor activities on concrete slabs. PhD thesis, Universidade Estadual de Campinas, Brazil.

Amorocho, J A P and Hartmann, T (2020) Decision-making process to select energy-efficient renovation alternatives for residential buildings: Two case studies. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Anastasopoulos, P (2009) Infrastructure asset management: A case study on pavement rehabilitation. PhD thesis, Purdue University, USA.

Anastasopoulos, P C; Labi, S; Bhargava, A; Bordat, C and Mannering, F L (2010) Frequency of change orders in highway construction using alternate count-data modeling methods. Journal of Construction Engineering and Management, 136(8), pp. 886-893. ISSN 0733-9364

Anastasopoulos, P C; Labi, S; Bhargava, A and Mannering, F L (2012) Empirical assessment of the likelihood and duration of highway project time delays. Journal of Construction Engineering and Management, 138(3), pp. 390-398. ISSN 0733-9364

Andersen, M; Kleindienst, S; Yi, L; Lee, J; Bodart, M and Cutler, B (2008) An intuitive daylighting performance analysis and optimization approach. Building Research & Information, 36(6), pp. 593-607. ISSN 0961-3218

Anderson, B and James, P (2021) Covid-19 lockdown: Impacts on gb electricity demand and CO2 emissions. Buildings & Cities, 2(1), pp. 134-149. ISSN 2632-6655

Anthony Jnr, B (2025) A decentralized prototype framework for peer-to-peer based electric car sharing services towards sustainable road transportation. Smart and Sustainable Built Environment, 14(4), pp. 1172-1193. ISSN 2046-6099

Anund Vogel, J (2020) Incentivising Innovation in the Swedish Construction Industry. PhD thesis, KTH Royal Institute of Technology, Sweden.

Apipattanavis, S (2007) Stochastic nonparametric methods for multi-site weather generation and flood frequency estimation: Applications to construction delay, hydrology and agricultural modeling. PhD thesis, University of Colorado at Boulder, USA.

Apipattanavis, S; Sabol, K; Molenaar, K R; Rajagopalan, B; Xi, Y; Blackard, B and Patil, S (2010) Integrated framework for quantifying and predicting weather-related highway construction delays. Journal of Construction Engineering and Management, 136(11), pp. 1160-1168. ISSN 0733-9364

Arashpour, M; Wakefield, R; Blismas, N and Lee, E W M (2013) A new approach for modelling variability in residential construction projects. Construction Economics and Building, 13(2), pp. 83-92. ISSN 2204-9029

Arashpour, M; Wakefield, R; Blismas, N and Lee, E W M (2014) Analysis of disruptions caused by construction field rework on productivity in residential projects. Journal of Construction Engineering and Management, 140(2): 04013053, ISSN 0733-9364

Arditi, D; Ayrancioglu, M and Shi, J J (2005) Worker safety issues in night-time highway construction. Engineering, Construction and Architectural Management, 12(5), pp. 487-501. ISSN 0969-9988

Arias-Jiménez, N.; Trebilcock-Kelly, M.; Figueroa-SanMartín, R. and González-Cáceres, A. (2026) Experimental evaluation of the impact of roofing materials and natural ventilation on attic overheating in a temperate Chilean climate. Building Research & Information, 54(5), pp. 573-587. ISSN 0961-3218

Arman, M H R (2014) Using option theory to manage risks in highway winter operations. PhD thesis, Purdue University, USA.

Armitage, P; Godoy-Shimizu, D; Steemers, K and Chenvidyakarn, T (2015) Using display energy certificates to quantify public sector office energy consumption. Building Research & Information, 43(6), pp. 691-709. ISSN 0961-3218

Artmann, N; Gyalistras, D; Manz, H and Heiselberg, P (2008) Impact of climate warming on passive night cooling potential. Building Research & Information, 36(2), pp. 111-128. ISSN 0961-3218

Ascione, F; Bellia, L; Mazzei, P and Minichiello, F (2010) Solar gain and building envelope: The surface factor. Building Research & Information, 38(2), pp. 187-205. ISSN 0961-3218

Asfour, O S and Gadi, M B (2006) Effect of integrating wind catchers with curved roofs on natural ventilation performance in buildings. Architectural Engineering and Design Management, 2(4), pp. 289-304. ISSN 1745-2007

Ashuri, B; Wang, J; Shahandashti, M and Baek, M (2019) A data envelopment analysis (DEA) model for building energy benchmarking. Journal of Engineering, Design and Technology, 17(4), pp. 747-768. ISSN 1726-0531

Asif, M (2019) An empirical study on life cycle assessment of double-glazed aluminium-clad timber windows. International Journal of Building Pathology and Adaptation, 37(5), pp. 547-564. ISSN 23984708

Aslan, Zaki M (2008) The design of protective structures for the conservation and presentation of archaeological sites. PhD thesis, University College London, UK.

Asnaashari, E (2011) A holistic conceptual model for managing construction logistics in building projects: the case of Iran. PhD thesis, Nottingham Trent University, UK.

Asnaashari, E; Knight, A; Hurst, A and Farahani, S S (2009) Causes of construction delays in Iran: Project management, logistics, technology and environment. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ataei, S and Jafari, A (2026) Comparative environmental impact assessment of 3D concrete printing and precast techniques in bridge construction: A case study analysis. Journal of Construction Engineering and Management, 152(1): 05025018, ISSN 0733-9364

Atef Elhamy Kamel, M (2013) Encouraging walkability in GCC cities: Smart urban solutions. Smart and Sustainable Built Environment, 2(3), pp. 288-310. ISSN 2046-6099

Atmaca, N (2017) Life-cycle assessment of post-disaster temporary housing. Building Research & Information, 45(5), pp. 524-538. ISSN 0961-3218

Au, Chung Yu Maria (2013) An optimal contract strategy in managing extension of time provisions in building contracts. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Austigard, M S and Mattsson, J (2020) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(4), pp. 529-538. ISSN 23984708

Avci, A B (2026) Machine learning-based prediction of thermal comfort: Exploring building types, climate, ventilation strategies, and seasonal variations. Building Research & Information, 54(1), pp. 100-117. ISSN 0961-3218

Ayda Montaser, K and Heidari, S (2021) Optimizing window size by integrating energy and lighting analyses considering occupants' visual satisfaction. Built Environment Project and Asset Management, 11(4), pp. 673-686. ISSN 2044-124X

Aye, L and Fuller, R J (2005) The proposed heating and cooling system in the CH2 building and its impact on occupant productivity. Construction Economics and Building, 5(2), pp. 32-39. ISSN 2204-9029

Aye, L and Fuller, R J (2005) An evaluation of a proposed ventilation system for melbourne's CH2 building. Construction Economics and Building, 5(2), pp. 47-57. ISSN 2204-9029

Ayodeji, F J (2014) Evaluation of site managers' hindrances towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(3), pp. 348-363.

Ayodele, T T (2022) Cost-effective retrofit packages for low-middle income residential buildings in Nigeria. PhD thesis, De Montfort University, UK.

Ayyub, B M (1983) Structural safety analysis of reinforced concrete buildings during construction (fuzzy set). PhD thesis, Georgia Institute of Technology, USA.

Ayyub, B M and Haidar, A (1985) Decisions in construction operations. Journal of Construction Engineering and Management, 111(4), pp. 343-357. ISSN 0733-9364

Baborska-Narożny, M; Stevenson, F and Grudzińska, M (2017) Overheating in retrofitted flats: Occupant practices, learning and interventions. Building Research & Information, 45(1-2), pp. 40-59. ISSN 0961-3218

Bahmani, H; Ao, Y; Yang, D; Wang, D; Li, M; Long, Y and Peng, P (2025) Implications for improving evacuation safety in primary school corridors: A video-based analysis on evacuees' speed and density. Engineering, Construction and Architectural Management, 32(12), pp. 8472-8493. ISSN 0969-9988

Bahrami, S (2021) Product information quality: A sustainability challenge in design and construction. PhD thesis, Lund University, Sweden.

Bakhtiyari, S; Taghi Akbari, L and Jamali Ashtiani, M (2017) An investigation on fire hazard and smoke toxicity of epoxy FRP composites. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 230-237. ISSN 1759-5916

Ballesteros-Pérez, P; Smith, S T; Lloyd-Papworth, J G and Cooke, P (2018) Incorporating the effect of weather in construction scheduling and management with sine wave curves: Application in the United Kingdom. Construction Management and Economics, 36(12), pp. 666-682. ISSN 01446193

Ballesteros-Pérez, P; del Campo-Hitschfeld, M L; González-Naranjo, M A and González-Cruz, M C (2015) Climate and construction delays: Case study in Chile. Engineering, Construction and Architectural Management, 22(6), pp. 596-621. ISSN 0969-9988

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Banawi, A A (2013) Improving construction processes by integrating lean, green, and six-sigma. PhD thesis, University of Pittsburgh, USA.

Barcia, R M (1985) Construction production planning and optimal control. PhD thesis, University of Waterloo, Canada.

Barlow, C (2012) The Code for Sustainable Homes: what are the innovation implications for the social housing development sector? PhD thesis, University of Salford, UK.

Behar, C B (2016) A socio-technical perspective of ventilation practices in UK social housing with whole house ventilation systems: design, everyday life and change. PhD thesis, University College London, UK.

Belias, E and Licina, D (2022) Outdoor pm2.5 air filtration: Optimising indoor air quality and energy. Buildings & Cities, 3(1), pp. 186-203. ISSN 2632-6655

Bennett, J and Ormerod, R N (1984) Simulation applied to construction projects. Construction Management and Economics, 2(3), pp. 225-263. ISSN 01446193

Besklubova, S; Kravchenko, E; Kasprzhitskii, A; Lazorenko, G and Zhong, R Y (2026) Establishing a market for carbon-neutral technology in concrete waste recycling by sequestering flue co 2: An evolutionary game theory-based case study in Hong Kong. Journal of Construction Engineering and Management, 152(4): 04026017, ISSN 0733-9364

Bienvenido-Huertas, D; Rubio-Bellido, C; Sánchez-García, D and Moyano, J (2019) Internal surface condensation risk in façades of Spanish social dwellings. Building Research & Information, 47(8), pp. 928-947. ISSN 0961-3218

Bilec, M M (2007) A hybrid life cycle assessment model for construction processes. PhD thesis, University of Pittsburgh, USA.

Bilec, Melissa M (2007) A hybrid life cycle assessment model for construction processess. PhD thesis, University of Pittsburgh, USA.

Bilhaif, A (1990) The influence of high temperatures on the productivity of construction workers. PhD thesis, University of Reading, UK.

Bingley, B; Knight, A and Xing, Y (2025) Church pipe organs: Historical tuning records as indoor environmental evidence. Buildings & Cities, 6(1), pp. 1010-1026. ISSN 2632-6655

Birchmore, R; Davies, K; Etherington, P; Tait, R and Pivac, A (2017) Overheating in Auckland homes: Testing and interventions in full-scale and simulated houses. Building Research & Information, 45(1-2), pp. 157-175. ISSN 0961-3218

Birgonul, Z (2021) A receptive-responsive tool for customizing occupant's thermal comfort and maximizing energy efficiency by blending BIM data with real-time information. Smart and Sustainable Built Environment, 10(3), pp. 504-535. ISSN 2046-6099

Bolchover, J and Mundle, K (2026) Post-disaster reconstruction: Infill housing prototypes for kathmandu. Buildings & Cities, 7(1), pp. 273-292. ISSN 2632-6655

Bordass, B; Cohen, R; Standeven, M and Leaman, A (2001) Assessing building performance in use 2: Technical performance of the Probe buildings. Building Research & Information, 29(2), pp. 103-113. ISSN 0961-3218

Borgeson, S and Brager, G (2011) Comfort standards and variations in exceedance for mixed-mode buildings. Building Research & Information, 39(2), pp. 118-133. ISSN 0961-3218

Borrallo-Jiménez, M; Esquivias, P M; Fernández-Agüera, J and LopezDeAsiain, M (2025) Hybrid ventilation in a nearly zero-energy building as a function of users' habits for better indoor air quality and thermal comfort in a warm climate. Building Research & Information, 53(1-2), pp. 77-94. ISSN 0961-3218

Bortey, L; Edwards, D J; Roberts, C and Rillie, I (2025) Unravelling incipient accidents: A machine learning prediction of incident risks in highway operations. Smart and Sustainable Built Environment, 14(6), pp. 1991-2022. ISSN 2046-6099

Botti, A and Ramos, M (2017) Adapting the design of a new care home development for a changing climate. International Journal of Building Pathology and Adaptation, 35(4), pp. 417-433.

Boulton, R J; Boulton, L L and Boulton, M J (2025) The effects of a short information-giving intervention on householders' beliefs and actions related to window opening as purge ventilation of water vapour: Implications for surveyors. International Journal of Building Pathology and Adaptation, 43(6), pp. 1559-1576. ISSN 2398-4708

Bourikas, L; Costanza, E; Gauthier, S; James, P A B; Kittley-Davies, J; Ornaghi, C; Rogers, A; Saadatian, E and Huang, Y (2018) Camera-based window-opening estimation in a naturally ventilated office. Building Research & Information, 46(2), pp. 148-16. ISSN 0961-3218

Boussaa, Y; Dodoo, A; Nguyen, T and Rupar-Gadd, K (2024) Comprehensive renovation of a multi-apartment building in Sweden: Techno-economic analysis with respect to different economic scenarios. Building Research & Information, 52(4), pp. 463-478. ISSN 0961-3218

Brahme, R and Mahdavi, A (2003) Complex early design inquiries via generative design agents. Construction Innovation, 3(2), pp. 81-95. ISSN 1471-4175

Brauner, M (2020) Developing an optimized sustainability assessment tool for building information modelling (BIM) systems: incorporation of hygrothermal modelling into BIM. PhD thesis, Auckland University of Technology, New Zealand.

Broer, S (2012) Solutions to climate change in UK housing developments: a lifestyle approach. EngD thesis, University College London, UK.

Brown, C and Gorgolewski, M (2015) Understanding the role of inhabitants in innovative mechanical ventilation strategies. Building Research & Information, 43(2), pp. 210-221. ISSN 0961-3218

Burman, E (2016) Assessing the operational performance of educational buildings against design expectations: a case study approach. PhD thesis, University College London, UK.

Buzzelli, M D (2001) The Canadian urban housebuilding industry: Firm size structure and production methods in Ontario, 1945–2000. PhD thesis, McMaster University, Canada.

Byrd, H; Matthewman, S and Rasheed, E (2022) Air-conditioning in New Zealand: Power and policy. Buildings & Cities, 3(1), pp. 1-9. ISSN 2632-6655

Camacho-Montano, S C; Cook, M and Wagner, A (2020) Avoiding overheating in existing school buildings through optimized passive measures. Building Research & Information, 48(4), pp. 349-363. ISSN 0961-3218

Camacho-Montano, S C; Wagner, A; Erhorn-Kluttig, H; Mumovic, D and Summerfield, A (2019) Clearing the air on EU guidance projects for school buildings. Building Research & Information, 47(5), pp. 624-634. ISSN 0961-3218

Cardellicchio, L (2021) Building defects in new iconic structures: The technical challenge and the economic impact of restoring the Jubilee Church in Rome. Architectural Engineering and Design Management, 17(1-2), pp. 146-166. ISSN 1745-2007

Carlos, J S (2017) The impact of refurbished windows on Portuguese old school buildings. Architectural Engineering and Design Management, 13(3), pp. 185-201. ISSN 1745-2007

Cattaneo, S and Mola, F (2012) Assessing the quality control of self-consolidating concrete properties. Journal of Construction Engineering and Management, 138(2), pp. 197-205. ISSN 0733-9364

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Celis-D'Amico, F; Echeverria-Valiente, E; Garcia-Alvarado, R; Escorcia-Oyola, O and da Casa-Martín, F (2025) CASA+: Highly energy-efficient housing system for the central-south of Chile. Construction Innovation, 25(2), pp. 306-327. ISSN 1471-4175

Cepeda, D M; Sohail, M and Ogunlowo, O O (2018) Understanding the critical success factors for delivery of megaprojects in Colombia. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(2), pp. 45-57. ISSN 17514304

Chan, E H W and Au, M C Y (2008) Relationship between organizational sizes and contractors' risk pricing behaviors for weather risk under different project values and durations. Journal of Construction Engineering and Management, 134(9), pp. 673-680. ISSN 0733-9364

Chan, I Y S and Chen, H (2024) Towards an integrative analysis of underground environment and human health: A survey and field measurement approach. Engineering, Construction and Architectural Management, 31(5), pp. 1807-1834. ISSN 0969-9988

Chand, A M and Loosemore, M (2016) Hospital learning from extreme weather events: Using causal loop diagrams. Building Research & Information, 44(8), pp. 875-888. ISSN 0961-3218

Chand A M, L M (2013) Reconceptualising hospital facility resilience to extreme weather events using a panarchy model. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Chandrasiri, A P and Geekiyanage, D (2018) Real-time object detection system for building energy conservation: An IP camera-based system. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Chang, T C; William, C and Crandall, K C (1990) Network resource allocation with support of a fuzzy expert system. Journal of Construction Engineering and Management, 116(2), pp. 239-260. ISSN 0733-9364

Chang, T-C (1987) Network resource allocation using an expert system with fuzzy logic reasoning. PhD thesis, University of California, Berkeley, USA.

Chappells, H and Shove, E (2005) Debating the future of comfort: Environmental sustainability, energy consumption and the indoor environment. Building Research & Information, 33(1), pp. 32-40. ISSN 0961-3218

Charles, A (2012) Factors affecting the transformation of existing (no-fines concrete) dwellings to low carbon homes. PhD thesis, Glasgow Caledonian University, UK.

Chi, S; Han, S and Kim, D Y (2013) Relationship between unsafe working conditions and workers' behavior and impact of working conditions on injury severity in U.S. Construction industry. Journal of Construction Engineering and Management, 139(7), pp. 826-838. ISSN 0733-9364

Chileshe, N; Boadua, A and Yirenkyi, F (2011) Perceptions of threat risk frequency and impact on construction projects in Ghana: Opinion survey findings. Journal of Construction in Developing Countries, 16(2), pp. 115-149. ISSN 1823-6499

Chileshe, N and Boadua Yirenkyi-Fianko, A (2012) An evaluation of risk factors impacting construction projects in Ghana. Journal of Engineering, Design and Technology, 10(3), pp. 306-329. ISSN 1726-0531

Chileshe, N; Kavishe, N and Edwards, D J (2021) Critical factors influencing the bid or no-bid decision of the indigenous small building contractors in Tanzania. Construction Innovation, 21(2), pp. 182-202. ISSN 1471-4175

Chin, J. Y.; Ng, C. T.; Sa'ari, R.; Ng, H. S. and Thong, J. W. (2026) Energy retrofitting by using building information modelling-based energy model. International Journal of Building Pathology and Adaptation, 44(4), pp. 1062-1097. ISSN 2398-4708

Choi, J (2006) Quantifying the effects of interference through use of an alternative method of productivity estimation. PhD thesis, University of Florida, USA.

Choi, J; Hong, D H; Lee, S H; Lee, H Y; Hong, T; Lee, D E and Park, H S (2023) Multi-objective green design model for prestressed concrete slabs in long-span buildings. Architectural Engineering and Design Management, 19(5), pp. 531-549. ISSN 1745-2007

Chow, D H C (2005) Effects of future climate change and near-extreme weather on office building in the UK. PhD thesis, University of Manchester, UK.

Chu, L (2017) Incorporation of functional considerations in highway pavement design and operations. PhD thesis, National University of Singapore, Singapore.

Cirrincione, Laura (2021) Simulation and experimental methods for improving energy efficiency, environmental performance and resilience of single and clustered groups of buildings. PhD thesis, Università degli Studi di Palermo, Italy.

Cohenca, D; Laufer, A and Ledbetter, W B (1989) Factors affecting construction planning efforts. Journal of Construction Engineering and Management, 115(1), pp. 70-89. ISSN 0733-9364

Collett, M; Hardy, A; Meulemans, J and Glew, D (2022) Evaluating the performance of a high thermal mass dwelling: Comparing predictions and in-situ measurements. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Conzatti, A; Fosas De Pando, D; Chater, B and Coley, D (2025) Are simple models for natural ventilation suitable for shelter design? Buildings & Cities, 6(1), pp. 158-181. ISSN 2632-6655

Cook, M J; Shukla, Y; Rawal, R; Angelopoulos, C; Caruggi-De-faria, L; Loveday, D; Spentzou, E and Patel, J (2022) Integrating low energy cooling and ventilation strategies in Indian residences. Buildings & Cities, 3(1), pp. 279-296. ISSN 2632-6655

Cooke, R S (2006) The use of alternative energy technologies in buildings: the influence of engineering consultants. EngD thesis, Brunel University, UK.

Costanzo, V; Fabbri, K; Schito, E; Pretelli, M and Marletta, L (2021) Microclimate monitoring and conservation issues of a baroque church in Italy: A risk assessment analysis. Building Research & Information, 49(7), pp. 729-747. ISSN 0961-3218

Cothern, E J (2021) Exposure to respirable crystalline silica during five OSHA Table 1 tasks and the effectiveness of dust controls, the contribution of background silica dust to personal exposures, and the use of a photometric instrument to assess silica dust exposure in real time. PhD thesis, Colorado State University, USA.

Crawley, J; McKenna, E; Gori, V and Oreszczyn, T (2020) Creating domestic building thermal performance ratings using smart meter data. Buildings & Cities, 1(1), pp. 1-13. ISSN 2632-6655

Croome, D J (1978) Building environmental engineering. PhD thesis, Loughborough University, UK.

Cuce, A P M (2016) Innovative heating, cooling and ventilation technologies for low-carbon buildings. PhD thesis, University of Nottingham, UK.

Dadzie, J; Runeson, G and Ding, G (2020) Assessing determinants of sustainable upgrade of existing buildings: The case of sustainable technologies for energy efficiency. Journal of Engineering, Design and Technology, 18(1), pp. 270-292. ISSN 1726-0531

Daghsen, K.; Gonzalez-Moreno, S. and Picallo-Perez, A. (2026) Energy rehabilitation of a university building system as a technical response to the Spanish blackout. Building Research & Information, 54(6), pp. 733-752. ISSN 0961-3218

Dams, B; Maskell, D; Shea, A; Allen, S; Cascione, V and Walker, P (2023) Upscaling bio-based construction: Challenges and opportunities. Building Research & Information, 51(7), pp. 764-782. ISSN 0961-3218

Daneshfar, M (2024) Integration of geospatial and environmental data to support building renovation. PhD thesis, Technische Universitaet Berlin, Germany.

Danforth, E M; Weidman, J E and Farnsworth, C B (2017) Strategies employed and lessons learned by commercial construction companies during economic recession and recovery. Journal of Construction Engineering and Management, 143(7): 04017027, ISSN 0733-9364

Danso-Amoako, M O (2006) Developing a framework to support data exchange from heterogeneous data sources via industry foundation classes (IFC) and web services. PhD thesis, University of Florida, USA.

Darko, A; Glushakova, I; Boateng, E B and Chan, A P C (2023) Using machine learning to improve cost and duration prediction accuracy in green building projects. Journal of Construction Engineering and Management, 149(8): 04023061, ISSN 0733-9364

Dauber, V F (2003) Measuring and minimising waste in construction by applying lean thinking. PhD thesis, University of Dundee, UK.

Davies, A-M (2004) Using images to present stated preference information: an application to the built environment. PhD thesis, Robert Gordon University, UK.

Dawood, N (1998) Estimating project and activity duration: A risk management approach using network analysis. Construction Management and Economics, 16(1), pp. 41-48. ISSN 01446193

Dawood, N N and Neale, R H (1993) Forecasting the sales of precast concrete building products. Construction Management and Economics, 11(2), pp. 81-98. ISSN 01446193

De Dear, R (2011) Revisiting an old hypothesis of human thermal perception: Alliesthesia. Building Research & Information, 39(2), pp. 108-117. ISSN 0961-3218

De Dear, R; Kim, J; Candido, C and Deuble, M (2015) Adaptive thermal comfort in Australian school classrooms. Building Research & Information, 43(3), pp. 383-398. ISSN 0961-3218

De Toldi, T; Craig, S and Sushama, L (2022) Internal thermal mass for passive cooling and ventilation: Adaptive comfort limits, ideal quantities, embodied carbon. Buildings & Cities, 3(1), pp. 42-67. ISSN 2632-6655

Deacon, H A and Kajimo-Shakantu, K (2024) The prevalence of claims under the JBCC principal building agreement in South Africa. International Journal of Construction Management, 24(3), pp. 331-338. ISSN 1562-3599

Delgoshaei, P (2017) Semantic models and reasoning for building system operations: Focus on knowledge-based control and fault detection for HVAC. PhD thesis, University of Maryland, College Park, USA.

Desai, A (2012) Formulating an FM strategy for climate change mitigation and adaptation of commercial built assets. PhD thesis, University of Greenwich, UK.

Disney, O; Roupé, M and Johansson, M (2023) Driving circularity with total BIM: An integrated approach to data-driven design. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Doczy, R (2018) Risk-benefit analysis and optimization of LEED-certified school buildings design and construction: Statisitical and machine learning approaches. PhD thesis, Florida State University, USA.

Domingo, N (2011) Reducing construction waste in healthcare projects: a project lifecycle approach. PhD thesis, Loughborough University, UK.

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Dormohamadi, M; Tahbaz, M and Velashjerdi Farahani, A (2025) Performance evaluation of a single-side windcatcher in the transitional seasons (case study: Khousf Town, Southern Khorasan Province, Iran). International Journal of Building Pathology and Adaptation, 43(3), pp. 338-368. ISSN 2398-4708

Downey, M (2012) Lowering CO2 emissions in the new build social housing sector: A Spanish case study. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Drummond, P and Ekins, P (2016) Reducing CO2 emissions from residential energy use. Building Research & Information, 44(5-6), pp. 585-603. ISSN 0961-3218

Dsouza, M; Phadtare, A; Vyas, S S; Shinde, Y and Jadhav, A (2024) Toward resilient development in rural area: some strategic recommendations based on contextual findings in Bhokardan Taluka, Jalna. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 699-727. ISSN 1759-5916

Du, H (2012) Modelling of building performance under the UK climate change projections and the prediction of future heating and cooling design loads in building spaces. PhD thesis, University of Northumbria at Newcastle, UK.

Durdyev, S (2021) Review of construction journals on causes of project cost overruns. Engineering, Construction and Architectural Management, 28(4), pp. 1241-1260. ISSN 0969-9988

Edwards, D J; Harris, P T and Holt, G D (1996) The greenhouse effect: impact upon and the role to be played by construction. Building Research & Information, 24(2), pp. 97-103. ISSN 0961-3218

Edwards, D J; Yang, J; Cabahug, R and Love, P E D (2005) Intelligence and maintenance proficiency: An examination of plant operators. Construction Innovation, 5(4), pp. 243-254. ISSN 1471-4175

Egwim, C N; Alaka, H; Toriola-Coker, L O; Balogun, H; Ajayi, S and Oseghale, R (2023) Extraction of underlying factors causing construction projects delay in Nigeria. Journal of Engineering, Design and Technology, 21(5), pp. 1323-1342. ISSN 1726-0531

Ejidike, C C; Mewomo, M C; Olawumi, T O; Wang, S and Buniya, M K (2025) Barriers to the adoption of smart building technology in developing countries: An empirical survey. Journal of Construction Engineering and Management, 151(6): 04025067, ISSN 0733-9364

El Kholy, S M (1991) Time and architecture: Problems of duration and sequence in architectural design. PhD thesis, University of Pennsylvania, USA.

El-Deeb, K (2024) Energy performance assessment of venetian blinds in south-oriented residential spaces in hot arid desert climates. Construction Innovation, 24(6), pp. 1460-1482. ISSN 1471-4175

El-Rayes, K and Moselhi, O (2001) Impact of rainfall on the productivity of highway construction. Journal of Construction Engineering and Management, 127(2), pp. 125-131. ISSN 0733-9364

El-Sawalhi, N I and Ajwa, H E A (2013) Mud building practices in construction projects in the Gaza Strip. International Journal of Construction Management, 13(2), pp. 13-26. ISSN 1562-3599

Elnaas, E (2014) The decision to use off-site manufacturing systems for house-building projects in the UK. PhD thesis, University of Brighton, UK.

Elsayed, M; Romagnoni, P; Pelsmakers, S; Castaño-Rosa, R and Klammsteiner, U (2023) The actual performance of retrofitted residential apartments: Post-occupancy evaluation study in Italy. Building Research & Information, 51(4), pp. 411-429. ISSN 0961-3218

Elsayed, M A A; Lastovets, N; Pistore, L and Pelsmakers, S (2024) Summer-time performance of Finnish housing: Poe of five apartments. International Journal of Building Pathology and Adaptation, 43(8), pp. 1-25. ISSN 2398-4708

Emuze, F (2017) The human contribution to unsafe construction acts and conditions in the central region of South Africa. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Emuze F, S T S W (2013) Perceived impact of the market on the business of regional contractors: A South African context. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Enshassi, A; Arain, F and Tayeh, B (2012) Major causes of problems between contractors and subcontractors in the Gaza Strip. Journal of Financial Management of Property and Construction, 17(1), pp. 92-112. ISSN 1366-4387

Erkoreka, A; Flores-Abascal, I; Escudero, C; Martin, K; Millan, J A and Sala, J M (2020) Flat roof hygrothermal performance testing and evaluation. International Journal of Building Pathology and Adaptation, 38(1), pp. 148-175. ISSN 23984708

Eslamirad, N; Malekpour Kolbadinejad, S; Mahdavinejad, M and Mehranrad, M (2020) Thermal comfort prediction by applying supervised machine learning in green sidewalks of Tehran. Smart and Sustainable Built Environment, 9(4), pp. 361-374. ISSN 2046-6099

Essaghouri, L.; Xu, F.; Zhu, C.; Aletoum, E. and Li, X. (2026) Two decades of embodied carbon in MENA's construction sector: Regional insights and policy implications. Journal of Construction Engineering and Management, 152(10): 04026171, ISSN 0733-9364

Essah, E A; Sanders, C H; Baker, P and Kalagasidis, A S (2009) Condensation and moisture transport in cold roofs: Effects of roof underlay. Building Research & Information, 37(2), pp. 117-128. ISSN 0961-3218

Fadeyi, M O (2012) Compromise between ventilation, filtration strategies and recirculation rates for the design and operation of air-conditioned facilities in the tropics. Architectural Engineering and Design Management, 8(1), pp. 6-20. ISSN 1745-2007

Faniran, O O and Caban, G (1998) Minimizing waste on construction project sites. Engineering, Construction and Architectural Management, 5(2), pp. 182-188. ISSN 0969-9988

Farnham, C; Zhang, L; Yuan, J; Emura, K; Alam, A M and Mizuno, T (2017) Measurement of the evaporative cooling effect: Oscillating misting fan. Building Research & Information, 45(7), pp. 783-799. ISSN 0961-3218

Farooghi, F (2020) The effect of natural disasters on construction labor wage fluctuations: A spatial difference-in-difference analysis. PhD thesis, University of Texas at Arlington, USA.

Faubel, C.; Mowen, D.; Miri, M.; Demarquet Alban, U.; Martinez-Molina, A. and Alamaniotis, M. (2026) Multimodal transformer models for real-time estimation of indoor environmental quality in educational settings. Smart and Sustainable Built Environment, pp. 1-37. ISSN 2046-6099

Fawcett, T and Killip, G (2014) Anatomy of low carbon retrofits: Evidence from owner-occupied superhomes. Building Research & Information, 42(4), pp. 434-445. ISSN 0961-3218

Federle, M O; Rowings, J E and Devany, T S (1993) Model of career choice for craftworkers. Journal of Construction Engineering and Management, 119(1), pp. 105-114. ISSN 0733-9364

Ferguson, L; Taylor, J; Zhou, K; Shrubsole, C; Symonds, P; Davies, M and Dimitroulopoulou, S (2021) Systemic inequalities in indoor air pollution exposure in London, UK. Buildings & Cities, 2(1), pp. 425-448. ISSN 2632-6655

Fernandes, Luciana Oliveira (2015) Procedure for retrofit of the heat power performance of educational buildings by applying passive strategies conditioning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Few, J and Elwell, C A (2023) Applying the CO2 concentration decay tracer gas method in long-term monitoring campaigns in occupied homes: Identifying appropriate unoccupied periods and decay periods. International Journal of Building Pathology and Adaptation, 41(1), pp. 96-108. ISSN 23984708

Few, J; Shipworth, M and Elwell, C (2024) Ventilation regulations and occupant practices: Undetectable pollution and invisible extraction. Buildings & Cities, 5(1), pp. 16-34. ISSN 2632-6655

Few, J F M (2021) Ventilation in occupied homes: measurement, performance and sociotechnical perspectives. PhD thesis, University College London, UK.

Fieldson, R (2017) The afterlife clause; towards a strategy for improved adaptation in retail property. International Journal of Building Pathology and Adaptation, 35(4), pp. 364-379.

Fifield, L-J (2017) Monitoring UK hospital building type performance. PhD thesis, Loughborough University, UK.

Firth, S K; Lomas, K J and Wright, A J (2010) Targeting household energy-efficiency measures using sensitivity analysis. Building Research & Information, 38(1), pp. 25-41. ISSN 0961-3218

Fisher, D J; O'Neill, M W and Contreras, J C (1995) DS^2: Drilled shaft decision support system. Journal of Construction Engineering and Management, 121(1), pp. 86-94. ISSN 0733-9364

Flood, C and Scott, L (2020) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(1), pp. 51-67. ISSN 23984708

Ford, B; Wilson, R; Gillott, M; Ibraheem, O; Salmeron, J and Sanchez, F J (2012) Passive downdraught evaporative cooling: Performance in a prototype house. Building Research & Information, 40(3), pp. 290-304. ISSN 0961-3218

Foster, J A and Poston, A (2024) Occupant experience of domestic kitchen environments in low-energy social and affordable housing in Scotland. Building Research & Information, 52(7), pp. 799-816. ISSN 0961-3218

Foster, S (2021) Improved thermal comfort for Hawai'i's elementary schools: Designing an educational building for thermal comfort using passive design techniques in the hot and humid climate. DArch thesis, University of Hawai'i at Manoa, USA.

Francart, N (2021) Decision support for the implementation of low-carbon measures in the building sector. PhD thesis, KTH Royal Institute of Technology, Sweden.

Frances, Z and Stevenson, F (2018) Domestic photovoltaic systems: The governance of occupant use. Building Research & Information, 46(1), pp. 23-41. ISSN 0961-3218

Fuller, R J (2004) Operating experiences with an advanced fabric energy storage system. Construction Economics and Building, 4(2), pp. 1-10. ISSN 2204-9029

Gage, S A and Graham, J M R (2000) Static split duct roof ventilators. Building Research & Information, 28(4), pp. 234-244. ISSN 0961-3218

Gajaba, P A P Y and Dissanayake, D M P P (2025) Barriers to implement energy efficiency strategies to heating, ventilation, air conditioning of airside system in commercial buildings in Sri Lanka. International Journal of Construction Management, 25(12), pp. 1395-1403. ISSN 1562-3599

Galaitsi, S E; Rand, K; Yeates, E; Talbot, C; O'Donnell, A; Pinigina, E and Linkov, I (2023) Stakeholder collaboration in the forecast-informed reservoir operations (firo) pilot project at lake mendocino, California. Built Environment Project and Asset Management, 13(6), pp. 880-895. ISSN 2044-124X

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Galbraith, G H; McLean, R C and Guo, J S (1998) Moisture permeability data presented as a mathematical relationship. Building Research & Information, 26(3), pp. 157-168. ISSN 0961-3218

Galiano-Garrigós, A; García-Figueroa, A; Rizo-Maestre, C and González-Avilés, Á (2019) Evaluation of BIM energy performance and CO2 emissions assessment tools: A case study in warm weather. Building Research & Information, 47(7), pp. 787-812. ISSN 0961-3218

Galiano-Garrigós, A; Marcos, C L; Kouider, T and Juan Gutiérrez, P J (2022) Reassessing thermal comfort in modern architecture: E.1027 as a case study. Building Research & Information, 50(1-2), pp. 230-254. ISSN 0961-3218

Gao, Q; Liu, B; Sun, J; Liu, C and Xu, Y (2022) Trade decomposition of CO2 emissions of global construction industries. Engineering, Construction and Architectural Management, 29(1), pp. 502-522. ISSN 0969-9988

Gao, Q; Liu, B; Sun, J; Liu, C and Xu, Y (2023) Border-crossing frequencies of CO2 embodied in international trade of construction products for final demand. Engineering, Construction and Architectural Management, 30(6), pp. 2360-2380. ISSN 0969-9988

Garay, A; Ruiz, A and Guevara, J (2022) Dynamic evaluation of thermal comfort scenarios in a colombian large-scale social housing project. Engineering, Construction and Architectural Management, 29(5), pp. 1909-1930. ISSN 0969-9988

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Gerding, D; Wamelink, H and Leclercq, E (2020) Implementation of circularity in the building process: A case study research into organizing the actor network and decision-making process. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ghanbari, M; Rusch, R and Skitmore, M (2024) BIM-based environmental assessment of residential renovation projects during the operational phase. Architectural Engineering and Design Management, 20(3), pp. 624-635. ISSN 1745-2007

Ghanbariazarneir, S.; Maskell, D.; Darby, A.; Heshmati, K. and Walker, I. (2026) The relationship between temperature, relative humidity, and productivity in workplace settings. Building Research & Information, 54(5), pp. 611-631. ISSN 0961-3218

Ghodki, M K; Swarup, A and Pal, Y (2020) A new IR and sprinkler based embedded controller directed robotic arm for automatic cleaning of solar panel. Journal of Engineering, Design and Technology, 18(4), pp. 905-921. ISSN 1726-0531

Gholami, E (2017) Exploiting BIM in energy efficient domestic retrofit: evaluation of benefits and barriers. PhD thesis, University of Liverpool, UK.

Ghosh, S; Kochhar, K; Sharma, A; Kaushal, S; Agrawal, J; Garg, A; Kumar, A and Dugar, Y (2016) Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India's upcoming smart cities. Smart and Sustainable Built Environment, 5(4), pp. 372-392. ISSN 2046-6099

Ghosh, S; Krishna, S R; Billton, J V; Srikanth, S A; Mohandas, S; Ashwin Ganesh, M and Shiv Kulin, C (2021) Countering tropical cyclonic storm impacts on low-rise houses. Smart and Sustainable Built Environment, 10(4), pp. 631-652. ISSN 2046-6099

Gines, J A (2024) Mass timber utilization in architecture: Carbon sequestration, building materials and construction practices. PhD thesis, Mississippi State University, USA.

Glass, A (2011) Analysis of building-integrated renewable energy systems in modern UK homes. EngD thesis, University of Manchester, UK.

Glew, D; Johnston, D; Miles-Shenton, D and Thomas, F (2020) Retrofitting suspended timber ground-floors; comparing aggregated and disaggregated evaluation methods. Building Research & Information, 48(5), pp. 572-586. ISSN 0961-3218

Godoy-Shimizu, D; Armitage, P; Steemers, K and Chenvidyakarn, T (2011) Using display energy certificates to quantify schools' energy consumption. Building Research & Information, 39(6), pp. 535-552. ISSN 0961-3218

Godoy-Shimizu, D; Steadman, P; Hamilton, I; Donn, M; Evans, S; Moreno, G and Shayesteh, H (2018) Energy use and height in office buildings. Building Research & Information, 46(8), pp. 845-863. ISSN 0961-3218

Golizadeh, H; Hosseini, M R; Edwards, D J; Abrishami, S; Taghavi, N and Banihashemi, S (2019) Barriers to adoption of RPAs on construction projects: a task–technology fit perspective. Construction Innovation, 19(2), pp. 149-169. ISSN 1471-4175

Goodarzi, F; Palaniappan, K; Pillay, M and Ershadi, M (2025) A scoping review of indoor air quality assessment in refurbished buildings. Smart and Sustainable Built Environment, 14(1), pp. 93-118. ISSN 2046-6099

Goodarzizad, P; Mohammadi Golafshani, E and Arashpour, M (2023) Predicting the construction labour productivity using artificial neural network and grasshopper optimisation algorithm. International Journal of Construction Management, 23(5), pp. 763-779. ISSN 1562-3599

Goodhew, S; Bird, P and Paterson, I (1997) The financial implications of using natural ventilation to reduce the levels of radon gas within an existing 'period' dwelling. Journal of Financial Management of Property and Construction, 2(2), pp. 85-104. ISSN 1366-4387

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Govertsen, K and Kane, M (2024) Measuring health inequities due to housing characteristics. Buildings & Cities, 5(1), pp. 451-469. ISSN 2632-6655

Grassie, D; Schwartz, Y; Symonds, P; Korolija, I; Mavrogianni, A and Mumovic, D (2022) Energy retrofit and passive cooling: Overheating and air quality in primary schools. Buildings & Cities, 3(1), pp. 204-225. ISSN 2632-6655

Grenzfurtner, W; Rudberg, M; Mayrhofer, R; Loike, K and Gronalt, M (2022) Performance measurement and management practices of on-site activities in industrialized housebuilding. Construction Management and Economics, 40(4), pp. 239-253. ISSN 01446193

Grimsrud, D; Bridges, B and Schulte, R (2006) Continuous measurements of air quality parameters in schools. Building Research & Information, 34(5), pp. 447-458. ISSN 0961-3218

Grosskopf, K R and Kibert, C J (2006) Economic incentive framework for sustainable energy use in us residential construction. Construction Management and Economics, 24(8), pp. 839-846. ISSN 1466433X

Gruneberg, S (2005) The performance of major firms in the heating and ventilating industry. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Gruneberg, S and Ive, G (2002) The relationship between the aggregate annual wage bills of heating and ventilation contractors, heating and ventilation industry output and construction industry output. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Gu, Y (2011) The impacts of real-time knowledge based personal lighting control on energy consumption, user satisfaction and task performance in offices. PhD thesis, Carnegie Mellon University, USA.

Guan, L (2009) Implication of global warming on air-conditioned office buildings in Australia. Building Research & Information, 37(1), pp. 43-54. ISSN 0961-3218

Guerra-Santin, O and Itard, L (2010) Occupants' behaviour: Determinants and effects on residential heating consumption. Building Research & Information, 38(3), pp. 318-338. ISSN 0961-3218

Gulbinas, R (2014) Motivating and quantifying energy efficient behavior among commercial building occupants. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Gupta, R; Barnfield, L and Gregg, M (2017) Overheating in care settings: Magnitude, causes, preparedness and remedies. Building Research & Information, 45(1-2), pp. 83-101. ISSN 0961-3218

Gyasi-Addo, A J and Bennadji, A (2020) Investigating the major causes of morphological transformations in the cbd of Accra and the impact on urban heat island intensity. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Haghighi, Z (2022) Architectural photovoltaic application. PhD thesis, Delft University of Technology, Netherlands.

Haik, R; Peled, A and Meir, I A (2021) Thermal performance of alternative binders lime hemp concrete (lhc) building: Comparison with conventional building materials. Building Research & Information, 49(7), pp. 763-776. ISSN 0961-3218

Hajizadeh, S. and Seyis, S. (2026) Multi-climate zone approach to sustainable retrofitting for optimizing energy efficiency and CO2 reduction in Australian detached houses. International Journal of Building Pathology and Adaptation, 44(4), pp. 885-909. ISSN 2398-4708

Hakkarainen, T E (2002) Studies on fire safety assessment of construction products. DSc(Tech) thesis, Tampereen Teknillinen Korkeakoulu, Finland.

Halliday, S; Beggs, C and Muneer, T (1999) Is solar air conditioning feasible? Building Research & Information, 27(3), pp. 149-164. ISSN 0961-3218

Halligan, D W; Demsetz, L A; Brown, J D and Pace, C B (1994) Action-response model and loss of productivity in construction. Journal of Construction Engineering and Management, 120(1), pp. 47-64. ISSN 0733-9364

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hamalainen, A K; Vaismaa, K and Kolisoja, P J (2025) Exploring information needed in maintenance backlog-related decision-making in the Finnish road network. Built Environment Project and Asset Management, 15(2), pp. 271-287. ISSN 2044-124X

Hamilton-MacLaren, F; Loveday, D and Mourshed, M (2009) The calculation of embodied energy in new build UK housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Hammad, A; Akbarnezhad, A; Grzybowska, H; Wu, P and Wang, X (2019) Mathematical optimisation of location and design of windows by considering energy performance, lighting and privacy of buildings. Smart and Sustainable Built Environment, 8(2), pp. 117-137. ISSN 2046-6099

Hamouda, H and Abu-Shaaban, N (2014) Enhancing labour productivity within construction industry through analytical hierarchy process, the case of Gaza Strip. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Hamstead, Z; Coseo, P; Alkhaled, S; Boamah, E F; Hondula, D M; Middel, A and Rajkovich, N (2020) Thermally resilient communities: Creating a socio-technical collaborative response to extreme temperatures. Buildings & Cities, 1(1), pp. 218-232. ISSN 2632-6655

Han, J M; Estrella Guillén, E; Liu, S; Chen, Y and Samuelson, H W (2025) Using explainable artificial intelligence to predict sleep interruptions from indoor environmental conditions: An empirical study. Building Research & Information, 53(5), pp. 636-655. ISSN 0961-3218

Handa, V K and Barcia, R M (1986) Construction production planning. Journal of Construction Engineering and Management, 112(2), pp. 163-177. ISSN 0733-9364

Hanna, A S and Skiffington, M A (2010) Effect of preconstruction planning effort on sheet metal project performance. Journal of Construction Engineering and Management, 136(2), pp. 235-241. ISSN 0733-9364

Hariyadi, A; Fukuda, H and Ma, Q (2017) The effectiveness of the parametric design 'sudare' blind as external shading for energy efficiency and visibility quality in Jakarta. Architectural Engineering and Design Management, 13(5), pp. 384-403. ISSN 1745-2007

Harrington, S and Mulville, M (2021) A risk framework for the delivery of long-term performance through the large-scale energy focused retrofit of housing. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Harrington, S and Mulville, M (2023) The suitability of sensor-based demand controlled ventilation systems in retrofit dwellings: A longitudinal study. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Harrington, S and Mulville, M (2025) Defining demand: The suitability of sensor-based demand-controlled ventilation within deep energy retrofit dwellings. Building Research & Information, 53(5), pp. 656-674. ISSN 0961-3218

Harris, D J and Dudek, S J M (1997) Heat losses from suspended timber floors. Building Research & Information, 25(4), pp. 226-233. ISSN 0961-3218

Harris, F C (1979) A model for evaluating the effects of weather on construction projects. PhD thesis, Loughborough University, UK.

Hassan, A A A (2019) Risk management of repetitive construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hassanain, M A; Aljuhani, M; Sanni-Anibire, M O and Abdallah, A (2019) Interdisciplinary design checklists for mechanical, electrical and plumbing coordination in building projects. Built Environment Project and Asset Management, 9(1), pp. 29-43. ISSN 2044-124X

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2023) Design quality assessment of campus facilities through post occupancy evaluation. International Journal of Building Pathology and Adaptation, 41(4), pp. 693-712. ISSN 23984708

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2024) An assessment of users' satisfaction with a smart building on university campus through post-occupancy evaluation. Journal of Engineering, Design and Technology, 22(4), pp. 1119-1135. ISSN 1726-0531

Hassandokht Mashhadi, A; Handy, R; Farhadmanesh, M; Rashidi, A; Honda, T; Sleeth, D K and Henry, T (2022) Feasibility study of using nebulizer-retrofitted uavs at construction projects: The case study of residential jobsites in Utah. Journal of Construction Engineering and Management, 148(10): 05022009, ISSN 0733-9364

Hassanein, A (2003) Planning and scheduling highway construction using GIS and dynamic programming. PhD thesis, Concordia University, Canada.

Hassanein, A and Moselhi, O (2004) Planning and scheduling highway construction. Journal of Construction Engineering and Management, 130(5), pp. 638-646. ISSN 0733-9364

Hatamleh, M T; Moynihan, G P; Batson, R G; Alzarrad, A and Ogunrinde, O (2023) Risk assessment and ranking in the developing countries' construction industry: The case of Jordan. Engineering, Construction and Architectural Management, 30(4), pp. 1344-1364. ISSN 0969-9988

Hazrati, A (2016) Predicting construction labor productivity with Bayesian belief networks. PhD thesis, University of Nebraska - Lincoln, USA.

He, T; Jazizadeh, F and Arpan, L (2022) Ai-powered virtual assistants nudging occupants for energy saving: Proactive smart speakers for HVAC control. Building Research & Information, 50(4), pp. 394-409. ISSN 0961-3218

Hebiba, A M; Bouferguene, A; Moon, S and Han, S (2022) Wind-wise automated stability analysis for selection of tower crane and location. Journal of Construction Engineering and Management, 148(11): 04022127, ISSN 0733-9364

Hedayati, M; Iyer-Raniga, U and Crossin, E (2014) A greenhouse gas assessment of a stadium in Australia. Building Research & Information, 42(5), pp. 602-615. ISSN 0961-3218

Hernandez, P and Kenny, P (2010) Integrating occupant preference and life cycle energy evaluation: A simplified method. Building Research & Information, 38(6), pp. 625-637. ISSN 0961-3218

Herrera-Avellanosa, D; Haas, F; Leijonhufvud, G; Brostrom, T; Buda, A; Pracchi, V; Webb, A L; Hüttler, W and Troi, A (2020) Deep renovation of historic buildings: The iea-shc task 59 path towards the lowest possible energy demand and CO2 emissions. International Journal of Building Pathology and Adaptation, 38(4), pp. 539-553. ISSN 23984708

Herring, H (2009) National building stocks: Addressing energy consumption or decarbonization? Building Research & Information, 37(2), pp. 192-195. ISSN 0961-3218

Hewage, K N (2007) Construction productivity improvement by worker motivation and it based communication. PhD thesis, University of Calgary, Canada.

Hinze, J and Couey, J (1989) Weather in construction contracts. Journal of Construction Engineering and Management, 115(2), pp. 270-283. ISSN 0733-9364

Holmes, S H; Phillips, T and Wilson, A (2016) Overheating and passive habitability: Indoor health and heat indices. Building Research & Information, 44(1), pp. 1-19. ISSN 0961-3218

Hong, S M; Paterson, G; Mumovic, D and Steadman, P (2014) Improved benchmarking comparability for energy consumption in schools. Building Research & Information, 42(1), pp. 47-61. ISSN 0961-3218

Hopfe, C J (2009) Uncertainty and sensitivity analysis in building performance simulation for decision support and design optimization. PhD thesis, Eindhoven University of Technology, Netherlands.

Hopkin, C and Lay, S (2024) Conceptual arguments on the use of unlatched reverse swing "flappy" door smoke control systems in residential buildings. International Journal of Building Pathology and Adaptation, 42(4), pp. 618-636. ISSN 23984708

Hou, H (2023) Understanding building and urban environment interactions: an integrated framework for building occupancy modelling. PhD thesis, Imperial College London, UK.

Hoxha, V (2020) Measuring embodied CO2 emission in construction materials in Kosovo apartments. International Journal of Building Pathology and Adaptation, 38(3), pp. 405-421. ISSN 23984708

Hsu, P. Y. (2026) Reinforcement learning framework for just-in-time material ordering in urban construction: Development, evaluation, and real-time deployment. Journal of Construction Engineering and Management, 152(9): 04026157, ISSN 0733-9364

Hsu, P. Y. (2026) Reinforcement learning framework for just-in-time material ordering in urban construction: Development, evaluation, and real-time deployment. Journal of Construction Engineering and Management, 152(9): 04026157, ISSN 0733-9364

Hu, M; Nippala, E; Kallioharju, K and Pelsmakers, S (2022) Monte Carlo simulation approach to understand the cost variance for energy retrofit projects: Comparative study of Finland and the United States. Construction Management and Economics, 40(3), pp. 207-222. ISSN 01446193

Hu, Y; Zhang, M; Ren, W; Li, H; Zhang, J; Wang, L and Shuai, S (2025) Detecting loss of balance in construction workers using millimeter wave sensing. Journal of Construction Engineering and Management, 151(12): 04025202, ISSN 0733-9364

Huang, R Y and Halpin, D W (1995) Graphical-based method for transient evaluation of construction operations. Journal of Construction Engineering and Management, 121(2), pp. 222-229. ISSN 0733-9364

Huebner, G M; Watson, N E; Direk, K; McKenna, E; Webborn, E; Hollick, F; Elam, S and Oreszczyn, T (2021) Survey study on energy use in UK homes during COVID-19. Buildings & Cities, 2(1), pp. 952-969. ISSN 2632-6655

Hulathdoowage, N D; Karunasena, G; Udawatta, N and Liu, C (2024) Reviewing the contribution of retrofitting for climate resilience in residential buildings. International Journal of Disaster Resilience in the Built Environment, 15(3), pp. 324-340. ISSN 1759-5916

Hulio, Z H; Yousufzai, G and Jiang, W (2021) Statistical analysis of wind resource and energy potential assessment of quaidabad site, sindh Pakistan. Journal of Engineering, Design and Technology, 19(6), pp. 1291-1316. ISSN 1726-0531

Hussin, M H; Othman, N H and Wan Ibrahim, M H (2019) Carbonation of concrete containing mussel (Perna viridis) shell ash. Journal of Engineering, Design and Technology, 17(5), pp. 904-928. ISSN 1726-0531

Huuhka, S; Moisio, M and Arnould, M (2024) Evaluating past and future building operational emissions: Improved method. Buildings & Cities, 5(1), pp. 150-161. ISSN 2632-6655

Huuhka, S; Moisio, M; Salmio, E; Köliö, A and Lahdensivu, J (2023) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings & Cities, 4(1), pp. 212-228. ISSN 2632-6655

Hyde, R (2023) An investigation into the relationship between technical design, fabrication process and material development for the production of thin, lightweight, high-performance concrete cladding components for the construction of beautiful, durable and resilient building envelopes. PhD thesis, Queen's University Belfast, UK.

Ibrahim, H; Wardeh, G; Fares, H and Ghorbel, E (2025) Mechanical and fracture properties of mortars reinforced with glass fibre and prepared with different cement types. International Journal of Building Pathology and Adaptation, 43(4), pp. 712-731. ISSN 2398-4708

Ibrahim, M N; Thorpe, D and Mahmood, M N (2019) Risk factors affecting the ability for earned value management to accurately assess the performance of infrastructure projects in Australia. Construction Innovation, 19(4), pp. 550-569. ISSN 1471-4175

Imam, R and Ayadi, O (2022) Powering electric tower cranes by solar energy for sustainable construction. International Journal of Construction Management, 22(13), pp. 2614-2624. ISSN 1562-3599

Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks. PhD thesis, University of Alberta, Canada.

Inyim, P (2015) Time, cost, and environmental impact analysis for sustainable design at multiple building levels. PhD thesis, Florida International University, USA.

Ip, K; Miller, A and Ellis, J (2003) Criteria and measurement of indoor air quality in sustainable buildings. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Ip, K; Miller, A and Shum, F (2003) Evaluation of indoor air quality and energy use in air conditioned office buildings. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Islam, M H; Safayet, M A and Al Mamun, A (2024) Building performance analysis for optimizing the energy consumption of an educational building. International Journal of Building Pathology and Adaptation, 42(4), pp. 576-595. ISSN 23984708

Ismaeel, W S E; Alamoudy, F O and Sameh, R (2023) How renovation activities may jeopardise indoor air quality: Accounting for short and long-term symptoms of sick building syndrome in educational buildings. Architectural Engineering and Design Management, 19(4), pp. 360-377. ISSN 1745-2007

Ismaeel, W S E; Mohamed, F and Elakkad, N (2021) Scenarios of occupational capacity for high educational buildings in the time of COVID. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Itzhak-Ben-shalom, H.; Saroglou, T.; Multanen, V.; Vanunu, A.; Karnieli, A.; Katoshevski, D.; Davidovitch, N. and Meir, I. A. (2025) Environmental variables and air quality: Implications for planning and public health. Buildings & Cities, 6(1), pp. 597-618. ISSN 2632-6655

Jack, R; Loveday, D; Allinson, D and Lomas, K (2018) First evidence for the reliability of building co-heating tests. Building Research & Information, 46(4), pp. 383-401. ISSN 0961-3218

Jackson, D J (2020) Addressing the challenges of reducing greenhouse gas emissions in the construction industry: a multi-perspective approach. PhD thesis, University of Edinburgh, UK.

Jaenglom, Kamonmarn (2014) Exploring construction supply chain management: A systematic perspective for creating sustainable performance. PhD thesis, Università degli Studi di Bergamo, Italy.

Jamalizadeh, A.; Kargar, V.; Haghighi, A.; Jahangiri, M.; Alimohammadlou, M. and Kamalinia, M. (2026) Identification and prioritization of preventive measures for crane overturning to enhance safety in asymmetric tandem lifting: Fuzzy logic approach. Journal of Construction Engineering and Management, 152(8): 04026126, ISSN 0733-9364

James, P D (2012) The specification of construction strategies for low and zero carbon homes: decision-making tools and the evaluation of whole life energy, carbon, cost and performance. PhD thesis, University of Manchester, UK.

Jarkas, A M (2015) Factors influencing labour productivity in Bahrain's construction industry. International Journal of Construction Management, 15(1), pp. 94-108. ISSN 1562-3599

Jarkas, A M; Al Balushi, R A and Raveendranath, P K (2015) Determinants of construction labour productivity in Oman. International Journal of Construction Management, 15(4), pp. 332-344. ISSN 1562-3599

Jassim, H S H (2019) Assessing energy use and carbon emissions to support planning of environmentally sustainable earthmoving operations. PhD thesis, Luleå University of Technology, Sweden.

Jayarathne, T D; De Silva, N and Samarakoon, W K U R M K P K (2024) Adopting smart retrofits: A decision-making model and benchmarking criteria. Built Environment Project and Asset Management, 14(3), pp. 366-383. ISSN 2044-124X

Jegard, L; Castaño-Rosa, R; Kilpeläinen, S and Pelsmakers, S (2024) Finnish glazed balconies: Residents’ experience, wellbeing and use. Buildings & Cities, 5(1), pp. 540-561. ISSN 2632-6655

Jegede, O E and Taki, A (2022) Optimization of building envelopes using indigenous materials to achieve thermal comfort and affordable housing in Abuja, Nigeria. International Journal of Building Pathology and Adaptation, 40(2), pp. 219-247. ISSN 23984708

Jergeas, G F and Revay, S O (1993) Quantifying construction claims using the differential cost method. Construction Management and Economics, 11(2), pp. 163-166. ISSN 01446193

Jervis, E K (2015) Lowering CO2 emissions: a framework for overcoming institutional pressures and diffusing low carbon strategy throughout the construction supply chain. PhD thesis, University of Liverpool, UK.

Ji, Y; Lee, A and Fernando, T (2020) Dynamic thermal simulation of advanced natural ventilation in buildings: Current and future usage, UK exemplar. Architectural Engineering and Design Management, 16(4), pp. 293-309. ISSN 1745-2007

Jiang, Y and Wu, H (2007) A method for highway agency to estimate highway construction durations and set contract times. International Journal of Construction Education and Research, 3(3), pp. 199-216. ISSN 1557-8771

Johnston, D; Wingfield, J and Miles-Shenton, D (2010) Measuring the fabric performance of UK dwellings. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Jones, P; Lannon, S and Patterson, J (2013) Retrofitting existing housing: How far, how much? Building Research & Information, 41(5), pp. 532-550. ISSN 0961-3218

Jowkar, M; Temeljotov-Salaj, A; Lindkvist, C M and Støre-Valen, M (2022) Sustainable building renovation in residential buildings: Barriers and potential motivations in Norwegian culture. Construction Management and Economics, 40(3), pp. 161-172. ISSN 01446193

Jung, M; Park, M; Lee, H S and Kim, H (2016) Weather-delay simulation model based on vertical weather profile for high-rise building construction. Journal of Construction Engineering and Management, 142(6): 04016007, ISSN 0733-9364

Junnila, S (2004) The environmental impact of an office building throughout its life cycle. PhD thesis, Helsinki University of Technology, Finland.

Kalil, A J (2002) Use of a work sampling method (TVEA) to characterize determinants of particulate exposure in heavy and highway construction. DSc thesis, University of Massachusetts Lowell, USA.

Kalua, A; Jeong Jo, S; Fateminasab, S; Al-Rqaibat, S and Opitz, C (2020) Impact of ventilation method on residential indoor pm dispersion during dust storm events in Saudi Arabia. Architectural Engineering and Design Management, 16(3), pp. 191-208. ISSN 1745-2007

Kaluarachchi, Y (2013) The awareness of two stakeholders and the resilience of their built assets to extreme weather events in England. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 297-316. ISSN 1759-5916

Kaluarachchi, Y and Jones, K (2014) Promoting low-carbon home adaptations and behavioural change in the older community. Architectural Engineering and Design Management, 10(1-2), pp. 131-145. ISSN 1745-2007

Kalz, D E; Pfafferott, J; Herkel, S and Wagner, A (2009) Building signatures correlating thermal comfort and low-energy cooling: In-use performance. Building Research & Information, 37(4), pp. 413-432. ISSN 0961-3218

Karaiskos, P; Munian, Y; Martinez-Molina, A and Alamaniotis, M (2026) Indoor air quality prediction modeling for a naturally ventilated fitness building using rnn-LSTM artificial neural networks. Smart and Sustainable Built Environment, 15(1), pp. 384-406. ISSN 2046-6099

Karunyasopon, P; Park, D Y; Le, D M and Chang, S (2024) Performance analysis of transparent BIPV/T double skin façades integrated with the decision-making algorithm for mixed-mode building ventilation. Architectural Engineering and Design Management, 20(5), pp. 1141-1163. ISSN 1745-2007

Kasozi, P and Tutesigensi, A (2007) A framework for appraising construction projects using carbon footprint. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Katsanis, C J (1998) An empirical examination of the relationships between strategy, structure and performance in building industry organizations. PhD thesis, Universite de Montreal, Canada.

Kaushik, A; Arif, M; Ebohon, O J; Arsalan, H; Rana, M Q and Obi, L (2023) Effect of indoor environmental quality on visual comfort and productivity in office buildings. Journal of Engineering, Design and Technology, 21(6), pp. 1746-1766. ISSN 1726-0531

Kayan, B A and Ashraf, N N (2023) Evaluating the environmental maintenance impact (EMI): A carbon life cycle assessment (LCA) of the singgora roof tiles repair in heritage buildings. International Journal of Building Pathology and Adaptation, 41(5), pp. 905-925. ISSN 23984708

Kerali, A G and Thomas, T H (2004) Simple durability test for cement stabilized blocks. Building Research & Information, 32(2), pp. 140-145. ISSN 0961-3218

Khalifa, R I (2019) Evaluating project assessment techniques for high-profile transportation projects development and delivery: Case of state departments of transportation (DOTS) in the United States. PhD thesis, Portland State University, USA.

Khalil, N (2016) Incorporating risk mitigation into building performance rating tools (BPRTS) for Malaysia’s higher education building. PhD thesis, University of Malaya, Malaysia.

Khan, M R and Sonawane, A (2020) Prediction of impact response in construction safety helmet using FEA. Journal of Engineering, Design and Technology, 18(3), pp. 557-566. ISSN 1726-0531

Khoshbakht, M; Zhang, F; Zomorodian, Z S and Gou, Z (2024) Thermal sensitivity and adaptive comfort in mixed-mode office buildings in humid subtropical climate. Building Research & Information, 52(6), pp. 693-707. ISSN 0961-3218

Khoshbakht Iradmoosa, Maryam (2019) Building performance studies for higher education campus buildings: Energy use, occupant satisfaction and thermal comfort. PhD thesis, Griffith University, Australia.

Kim, A (2024) A comprehensive approach to industrial decarbonization efforts within the building materials sector. PhD thesis, University of California, Davis, USA.

Kim, Jungsoo (2014) Impact of indoor environmental quality (IEQ) factors on occupant evaluation of workspaces. PhD thesis, University of Sydney, Australia.

Kim, K and De La Garza, J M (2005) Critical path method with multiple calendars. Journal of Construction Engineering and Management, 131(3), pp. 330-342. ISSN 0733-9364

Kim, K P and Park, K S (2016) Primary BIM dataset for refurbishing flood risk vulnerable housing in the UK. Built Environment Project and Asset Management, 6(4), pp. 365-378. ISSN 2044-124X

Kim, S (2023) Disaster management and recovery: Estimating the disaster impacts on construction costs and evaluating the policy effects on disaster recovery. PhD thesis, University of Texas at Arlington, USA.

Kindangen, J I (1997) Window and roof configurations for comfort ventilation. Building Research & Information, 25(4), pp. 218-225. ISSN 0961-3218

Kleerekoper, L; van den Dobbelsteen, A A J F; Hordijk, G J; van Dorst, M J and Martin, C L (2015) Climate adaptation strategies: Achieving insight in microclimate effects of redevelopment options. Smart and Sustainable Built Environment, 4(1), pp. 110-136. ISSN 2046-6099

Ko, W H (2021) View and environmental quality in buildings. PhD thesis, University of California, Berkeley, USA.

Koch, C (2012) Contested overruns and performance of offshore wind power plants. Construction Management and Economics, 30(8), pp. 609-622. ISSN 1466433X

Koch, C and Larsen, A (2018) Performance of retrofit with ICT of social housing: Proving technology optimists wrong? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Kodikara Edirisinghe, R. and Gunathilake, L. (2026) An IoT-based heat stress management system for the construction industry. Engineering, Construction and Architectural Management, 33(3), pp. 2200-2219. ISSN 0969-9988

Koehn, E and Brown, G (1985) Climatic effects on construction. Journal of Construction Engineering and Management, 111(2), pp. 129-137. ISSN 0733-9364

Koranteng, C; Simons, B; Abrokwa Gyimah, K and Nkrumah, J (2023) Ghana's green building assessment journey: An appraisal of the thermal performance of an office building in Accra. Journal of Engineering, Design and Technology, 21(1), pp. 188-205. ISSN 1726-0531

Kramer, R; Schellen, L and Schellen, H (2018) Adaptive temperature limits for air-conditioned museums in temperate climates. Building Research & Information, 46(6), pp. 686-697. ISSN 0961-3218

Krishnaraj, L; Kumar, V R P; Balasubramanian, M; Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(1), pp. 31-40. ISSN 1562-3599

Krych, K; Heeren, N and Hertwich, E G (2021) Factors influencing the life-cycle GHG emissions of Brazilian office buildings. Buildings & Cities, 2(1), pp. 856-873. ISSN 2632-6655

Kumar, V S S (1993) Application of fuzzy set theory in construction management. PhD thesis, Indian Institute of Technology Delhi, India.

Kuo, S-F (1995) Decision support for irrigated project planning using a genetic algorithm. PhD thesis, Utah State University, USA.

Kurtzer, D; Blackmore, N; Farrugia, N and Chileshe, N (2020) Productivity enablers and inhibiting health and wellbeing practices of South Australian construction site-based workers: A qualitative study. International Journal of Construction Management, 20(8), pp. 882-899. ISSN 1562-3599

Kusi, E; Boateng, I and Danso, H (2025) Energy consumption and carbon emission of conventional and green buildings using building information modelling (BIM). International Journal of Building Pathology and Adaptation, 43(4), pp. 826-854. ISSN 2398-4708

Kölsch, P (2019) Hygrothermal simulation of cathedral ceiling roofs with ventilated roofing tiles. International Journal of Building Pathology and Adaptation, 37(4), pp. 473-487. ISSN 23984708

La, Anh Tuan (2016) Principal factors for public-private partnership (ppp) implementation in Vietnam: A mixed methods study. PhD thesis, University of Technology Sydney, Australia.

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Laloui, H; Abdul Majid, N H and Sanusi, A N Z (2022) The impacts of introducing voids combinations on indoor ventilation performance in high-rise residential buildings. Engineering, Construction and Architectural Management, 29(7), pp. 2736-2759. ISSN 0969-9988

Lamb, S and Kwok, K C S (2017) Sopite syndrome in wind-excited buildings: Productivity and wellbeing impacts. Building Research & Information, 45(3), pp. 347-358. ISSN 0961-3218

Landin, A M and Persson, M H (1998) Evaluation of quality systems for specialist contractors. Engineering, Construction and Architectural Management, 5(3), pp. 210-219. ISSN 0969-9988

Larsson, R (2021) Modelling and simulation of factors influencing on-site construction of concrete frameworks: Studying the effects of resource allocation, weather conditions, and climate-improved concrete. PhD thesis, Lund University, Sweden.

Larsson, R and Rudberg, M (2019) Impact of weather conditions on in situ concrete wall operations using a simulation-based approach. Journal of Construction Engineering and Management, 145(7): 05019009, ISSN 0733-9364

Larsson, R and Rudberg, M (2023) Effects of weather conditions on concrete work task productivity: a questionnaire survey. Construction Innovation, 23(2), pp. 306-321. ISSN 1471-4175

Lataniotis, C (2019) Data-driven uncertainty quantification for high-dimensional engineering problems. DSc thesis, ETH Zürich, Switzerland.

Laufer, A and Cohenca, D (1990) Factors affecting construction-planning outcomes. Journal of Construction Engineering and Management, 116(1), pp. 135-156. ISSN 0733-9364

Lazaro, S. A. M.; Li, X. and Baba, V. F. (2026) Evaluating expanded polystyrene insulation for enhancing energy efficiency in residential buildings: A scalable model from Mozambique. Journal of Engineering, Design and Technology, 24(4), pp. 992-1011. ISSN 1726-0531

Le Gia, T T; Dang, H A; Dinh, V B; Tong, M Q; Nguyen, T K; Nguyen, H H and Nguyen, D Q (2022) A simulation-based multi-objective genetic optimization framework for efficient building design in early stages: Application for Vietnam's hot and humid climates. International Journal of Building Pathology and Adaptation, 40(3), pp. 305-326. ISSN 23984708

Leder, S; Newsham, G R; Veitch, J A; Mancini, S and Charles, K E (2016) Effects of office environment on employee satisfaction: A new analysis. Building Research & Information, 44(1), pp. 34-50. ISSN 0961-3218

Lee, J; Jang, K; Sparkling, A E and Kang, K (2026) Large language model-based construction site management for severe weather preparedness. Journal of Construction Engineering and Management, 152(1): 04025220, ISSN 0733-9364

Lee, B-H (2011) Forecasting wheat yield and quality conditional on weather information and estimating construction costs of agricultural facilities. PhD thesis, Oklahoma State University, USA.

Lee, C; Hong, T; Lee, G and Jeong, J (2012) Life-cycle cost analysis on glass type of high-rise buildings for increasing energy efficiency and reducing CO2 emissions in Korea. Journal of Construction Engineering and Management, 138(7), pp. 897-904. ISSN 0733-9364

Lee, H S; Shin, J W; Park, M and Ryu, H G (2009) Probabilistic duration estimation model for high-rise structural work. Journal of Construction Engineering and Management, 135(12), pp. 1289-1298. ISSN 0733-9364

Lee, S (2018) Investigating the relationship between energy consumption, CO2 emissions, and the factors affecting them in the United States building sector: A macro and micro view. PhD thesis, Arizona State University, USA.

Lee, W V and Steemers, K (2017) Exposure duration in overheating assessments: A retrofit modelling study. Building Research & Information, 45(1-2), pp. 60-82. ISSN 0961-3218

Leo, L S; Buccolieri, R and Di Sabatino, S (2018) Scale-adaptive morphometric analysis for urban air quality and ventilation applications. Building Research & Information, 46(8), pp. 931-951. ISSN 0961-3218

Leu, S S and Hung, T H (2002) A genetic algorithm-based optimal resource-constrained scheduling simulation model. Construction Management and Economics, 20(2), pp. 131-141. ISSN 01446193

Li, H.; Lyu, R.; Sheng, J.; Menadue, V. and Skitmore, M. (2026) Enhancing eco-efficiency in china's construction industry: Measurement, drivers, and policy implications using an ebm-tobit approach. International Journal of Construction Management, 26(9), pp. 1727-1745. ISSN 1562-3599

Li, H X; Nair, S; Li, Y; Yahaya, A; Timms, W and Owolabi, A B (2026) Evaluating energy performance of educational buildings: A case study in Australia. Engineering, Construction and Architectural Management, 33(15), pp. 137-158. ISSN 0969-9988

Li, C (2023) Efficient and accurate assessment of fire spread over external claddings in high-rise buildings. PhD thesis, University of Manchester, UK.

Li, K Y K and Chan, A T (2004) Management of radon in tunnel drilling. Journal of Construction Engineering and Management, 130(5), pp. 699-707. ISSN 0733-9364

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Li, Q (2009) Energy efficiency design of residential buildings in North China cities. PhD thesis, Cardiff University, UK.

Li, Shuyang (2020) Proactive design approaches for energy-efficient buildings. PhD thesis, University of California, USA.

Li, W; Zhang, Y; Lu, D and Augenbroe, G (2020) Quantification methods of natural ventilated building performance in preliminary design. Building Research & Information, 48(4), pp. 401-414. ISSN 0961-3218

Liang, Q and Li, Q (2021) Investigating the influence of facilities management factors in community area on quality of life of the elderly. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Liang, Y; Ashuri, B and Sun, W (2020) Analysis of the variability of project cost and schedule performance in the design-build environment. Journal of Construction Engineering and Management, 146(6): 04020060, ISSN 0733-9364

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Lin, K-Y (2013) Investigating reducing building energy use at urban scale in Taipei. PhD thesis, Cardiff University, UK.

Lin, Y-S (1996) Optimal design and probabilistic evaluation of fire egress systems. PhD thesis, Duke University, USA.

Lindhard, S M (2024) Applying work measurements to identify productivity potentials: The case of prefabricated concrete elements. International Journal of Construction Management, 24(15), pp. 1668-1678. ISSN 1562-3599

Lisø, K R; Hygen, H O; Kvande, T and Thue, J V (2006) Decay potential in wood structures using climate data. Building Research & Information, 34(6), pp. 546-551. ISSN 0961-3218

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Littlefair, P; Ortiz, J and Bhaumik, C D (2010) A simulation of solar shading control on UK office energy use. Building Research & Information, 38(6), pp. 638-646. ISSN 0961-3218

Liu, L (2017) A systematic approach for major renovation of residential buildings. PhD thesis, Linköping University, Sweden.

Liu, X; Song, Y; Yi, W; Wang, X and Zhu, J (2018) Comparing the random forest with the generalized additive model to evaluate the impacts of outdoor ambient environmental factors on scaffolding construction productivity. Journal of Construction Engineering and Management, 144(6): 04018037, ISSN 0733-9364

Liyanage, C; Dias, N; Amaratunga, D and Haigh, R (2017) Current context of transport sector in south Asia: Recommendations towards a sustainable transportation system. Built Environment Project and Asset Management, 7(5), pp. 490-505. ISSN 2044-124X

Llabres-Morey, M A; Hormigos-Jimenez, S and Del Río Merino, M (2025) CO2 concentration in six schools located in palma: A comparative evaluation. Building Research & Information, 53(8), pp. 983-1013. ISSN 0961-3218

Llabrés-Morey, M A; Hormigos-Jimenez, S and Río Merino, M (2025) Co₂ concentration in six schools located in palma: A comparative evaluation. Building Research & Information, 53(8), pp. 983-1013. ISSN 0961-3218

Llabrés-Morey, M A; Hormigos-Jimenez, S and del Rio Merino, M (2025) Evaluation of CO2 and tvoc concentration in a school in palma during the month of june. Building Research & Information, 53(1-2), pp. 95-119. ISSN 0961-3218

Lomas, K J (2009) Decarbonizing national housing stocks: Strategies, barriers and measurement. Building Research & Information, 37(2), pp. 187-191. ISSN 0961-3218

Loosemore, M and Chand, A (2016) Barriers to building resilience to extreme weather events in Australian hospitals. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Loosemore, M; Chow, V and Harvison, T (2013) Inter-agency governance risk in managing hospital responses to extreme weather events in New South Wales, Australia: A facilities management perspective of shared situational awareness. Construction Management and Economics, 31(10), pp. 1072-1082. ISSN 1466433X

Loosemore, M; Chow, V and McGeorge, D (2014) Managing the health risks of extreme weather events by managing hospital infrastructure. Engineering, Construction and Architectural Management, 21(1), pp. 4-32. ISSN 0969-9988

Loosemore, M; Chow, V W and McGeorge, D (2012) Modelling the risks of extreme weather events for Australasian hospital infrastructure using rich picture diagrams. Construction Management and Economics, 30(12), pp. 1071-1086. ISSN 1466433X

Lopane, F D (2022) Spatial optimisation for resilient infrastructure services. PhD thesis, University of Newcastle upon Tyne, UK.

Lowe, R (2007) Technical options and strategies for decarbonizing UK housing. Building Research & Information, 35(4), pp. 412-425. ISSN 0961-3218

Lu, N and Liska, R W (2008) Designers' and general contractors' perceptions of offsite construction techniques in the united state construction industry. International Journal of Construction Education and Research, 4(3), pp. 177-188. ISSN 1557-8771

Lynch, H (2014) Passivhaus in the UK: the challenges of an emerging market: a case study of innovation using mixed methods research. PhD thesis, University College London, UK.

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: Lessons from a PoE case study. Building Research & Information, 33(1), pp. 17-31. ISSN 0961-3218

Madhlopa, A (2016) Effect of controlling airflow in a solar chimney on thermal load in a built environment. Journal of Engineering, Design and Technology, 14(2), pp. 286-309.

Mah, D E (2011) Framework for rating the sustainability of the residential construction practice. PhD thesis, University of Alberta, Canada.

Maharjan, R (2017) Effects of contract procurement factors on performance of transportation projects. PhD thesis, University of Nevada, Las Vegas, USA.

Mahdy, M M M (2014) Applying architecture simulation tools to assess building sustainable design: adapting the Egyptian residential energy code for climate change. PhD thesis, University of Kent, UK.

Mahmud, A T (2021) Enhancing the understanding of cost overrun drivers in highway projects in Nigeria through system dynamics modelling. PhD thesis, Heriot-Watt University, UK.

Mahmud, A T; Ogunlana, S O and Hong, W T (2021) Key driving factors of cost overrun in highway infrastructure projects in Nigeria: A context-based perspective. Journal of Engineering, Design and Technology, 19(6), pp. 1530-1555. ISSN 1726-0531

Majdalani, J G (2010) Management, operation, and maintenance of wastewater systems. DE thesis, Lamar University - Beaumont, USA.

Mangitung, D M (2005) Modelling the influence of periodic prequalification criteria on project performance. PhD thesis, University of Manchester, UK.

Mani, S.; Karunasena, G.; Hosseini, M. R. and Hasan, A. (2026) Building circularity performance model: A weighted multi-level assessment framework aligned with ISO standards. Smart and Sustainable Built Environment, ISSN 2046-6099

Manrique Delgado, B; Cao, S; Hasan, A and Sirén, K (2018) Energy and exergy analysis of prosumers in hybrid energy grids. Building Research & Information, 46(6), pp. 668-685. ISSN 0961-3218

Maqsoom, A; Choudhry, R M; Umer, M and Mehmood, T (2021) Influencing factors indicating time delay in construction projects: Impact of firm size and experience. International Journal of Construction Management, 21(12), pp. 1251-1262. ISSN 1562-3599

Marchwiński, J and Kurtz-Orecka, K (2023) Effect of photovoltaic installation power and façade glazing ratio on the energy performance of a nursery building. Engineering, Construction and Architectural Management, 30(4), pp. 1463-1480. ISSN 0969-9988

Marciano, E J (2003) Sustainable development and the cement and concrete industries. PhD thesis, Universite de Sherbrooke, Canada.

Marcos, Micheline Helen Cot (2015) Method of obtaining environmental impact data, during the design development process through use of BIM tool. PhD thesis, Universidade de São Paulo, Brazil.

Martin-Du Pan, O; Eames, P; Rowley, P; Bouchlaghem, D and Susman, G (2015) Current and future operation scenarios for a 50,000 MWh district heating system. Architectural Engineering and Design Management, 11(4), pp. 280-304. ISSN 1745-2007

Martínez, A; Alonso, C; Martín-Consuegra, F; Pérez, G; Frutos, B and Gutiérrez, Á (2021) Experimental analysis of a prototype for a thermochromic trombe wall. Building Research & Information, 49(7), pp. 777-794. ISSN 0961-3218

Martínez Fernández, P; Villalba Sanchís, I; Insa Franco, R and Yepes, V (2022) Slab track optimization using metamodels to improve rail construction sustainability. Journal of Construction Engineering and Management, 148(7): 04022053, ISSN 0733-9364

Mason, B (2023) Advancing autonomous green stormwater infrastructure. PhD thesis, University of Michigan, USA.

Mastrucci, A and Rao, N D (2019) Bridging India's housing gap: Lowering costs and CO2 emissions. Building Research & Information, 47(1), pp. 8-23. ISSN 0961-3218

Mavrogianni, A; Davies, M; Chalabi, Z; Wilkinson, P; Kolokotroni, M and Milner, J (2009) Space heating demand and heatwave vulnerability: London domestic stock. Building Research & Information, 37(5-6), pp. 583-597. ISSN 0961-3218

Mavrogianni, A; Pathan, A; Oikonomou, E; Biddulph, P; Symonds, P and Davies, M (2017) Inhabitant actions and summer overheating risk in London dwellings. Building Research & Information, 45(1-2), pp. 119-142. ISSN 0961-3218

Mavrogianni, A; Taylor, J; Davies, M; Thoua, C and Kolm-Murray, J (2015) Urban social housing resilience to excess summer heat. Building Research & Information, 43(3), pp. 316-333. ISSN 0961-3218

Mbabazi, A (2004) Quantification and analysis of construction claims. PhD thesis, University of Waterloo, Canada.

McEvoy, M and Southall, R (2010) A programme of testing to evaluate a passive approach to whole-house ventilation. Construction Innovation, 10(4), pp. 395-407. ISSN 1471-4175

McGill, G; Oyedele, L O and McAllister, K (2015) An investigation of indoor air quality, thermal comfort and sick building syndrome symptoms in UK energy efficient homes. Smart and Sustainable Built Environment, 4(3), pp. 329-348. ISSN 2046-6099

McGill, G; Sharpe, T; Robertson, L; Gupta, R and Mawditt, I (2017) Meta-analysis of indoor temperatures in new-build housing. Building Research & Information, 45(1-2), pp. 19-39. ISSN 0961-3218

Mdibi, L; Van Zyl, R; Kosch, M and Ward, J (2021) A land-based hf transmitter for ionospheric propagation studies using superdarn radars. Journal of Engineering, Design and Technology, 19(6), pp. 1648-1659. ISSN 1726-0531

Meacham, B J (2022) Fire performance and regulatory considerations with modern methods of construction. Buildings & Cities, 3(1), pp. 464-487. ISSN 2632-6655

Mehany, M S H M (2014) Delay-caused claims in infrastructure projects under design-bid-build delivery systems. PhD thesis, Colorado State University, USA.

Meijer, F; Itard, L and Sunikka-Blank, M (2009) Comparing European residential building stocks: Performance, renovation and policy opportunities. Building Research & Information, 37(5-6), pp. 533-551. ISSN 0961-3218

Meir, I A; Schwartz, M; Davara, Y and Garb, Y (2019) A window of one's own: A public office post-occupancy evaluation. Building Research & Information, 47(4), pp. 437-452. ISSN 0961-3218

Memarian, B and Mitropoulos, P (2014) Production system design for speed and reliability: A case study in concrete construction. International Journal of Construction Education and Research, 10(3), pp. 181-200. ISSN 1557-8771

Menadue, Vanessa Rachel (2014) Green commercial office buildings: Environmental performance and user perceptions. PhD thesis, University of Adelaide, Australia.

Michael Gbolagade, O; Inimbom Walter, I and Emuze, F (2021) Towards sustainability practices deployment in building construction projects in Nigeria. Smart and Sustainable Built Environment, 10(4), pp. 759-780. ISSN 2046-6099

Miglioranza, P; Scanu, A; Simionato, G; Sinigaglia, N and Califano, A (2024) Machine learning and engineering feature approaches to detect events perturbing the indoor microclimate in ringebu and heddal stave churches (Norway). International Journal of Building Pathology and Adaptation, 42(1), pp. 35-47. ISSN 23984708

Miles-Shenton, D; Parker, J; Glew, D and Thomas, F (2025) Quantifying inter-dwelling air exchanges during fan pressurisation tests. Buildings & Cities, 6(1), pp. 239-254. ISSN 2632-6655

Mills, E (2003) Climate change, insurance and the buildings sector: Technological synergisms between adaptation and mitigation. Building Research & Information, 31(3-4), pp. 257-277. ISSN 0961-3218

Mirabi, E and Akrami Abarghuie, F (2023) Investigating the climate-adaptive design strategies of residential earth-sheltered buildings in Iran. International Journal of Building Pathology and Adaptation, 41(5), pp. 1029-1048. ISSN 23984708

Mitkees, L; Heidarinejad, M; Sabatino, M and Stephens, B (2024) Occupant thermal comfort and indoor environmental conditions in Mies van der Rohe's S.R. Crown hall. Building Research & Information, 52(3), pp. 249-272. ISSN 0961-3218

Mlecnik, E (2013) Improving passive house certification: Recommendations based on end-user experiences. Architectural Engineering and Design Management, 9(4), pp. 250-264. ISSN 1745-2007

Mmereki, D and Brouwer, D (2022) Application of innovative materials and methods in green buildings and associated occupational exposure and health of construction workers: A systematic literature review. Journal of Construction Engineering and Management, 148(8): 04022068, ISSN 0733-9364

Mohajeri, N; Walch, A; Gudmundsson, A; Heaviside, C; Askari, S; Wilkinson, P and Davies, M (2021) COVID-19 mobility restrictions: Impacts on urban air quality and health. Buildings & Cities, 2(1), pp. 759-778. ISSN 2632-6655

Mohamed, Emad (2021) Decision-support system for construction risk management in onshore wind projects. PhD thesis, University of Alberta, Canada.

Monahan, J (2013) Housing and carbon reduction: can mainstream 'eco-housing' deliver on its low carbon promises? PhD thesis, University of East Anglia, UK.

Moohialdin, A S M; Lamari, F; Miska, M and Trigunarsyah, B (2020) Construction worker productivity in hot and humid weather conditions: A review of measurement methods at task, crew and project levels. Engineering, Construction and Architectural Management, 27(1), pp. 83-108. ISSN 0969-9988

Moohialdin, A S M; Lamari, F; Miska, M and Trigunarsyah, B (2023) Proximity activity intensity identification system in hot and humid weather conditions: Development and implementation. Journal of Construction Engineering and Management, 149(12): 04023122, ISSN 0733-9364

Moohialdin, Ammar (2020) A real-time worker activity intensity identification system for construction workers under hot and humid weather conditions. PhD thesis, Queensland University of Technology, Australia.

Moreno, M; Ortiz, R and Ortiz, P (2024) Remote sensing to assess the risk for cultural heritage: Forecasting potential collapses due to rainfall in historic fortifications. International Journal of Building Pathology and Adaptation, 42(1), pp. 92-113. ISSN 23984708

Morsi, D M A; Ismaeel, W S E; El Hamed, A E A and Othman, A A E (2020) Applying LCA-BIM integration for a sustainable management process. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Moselhi, O and Hassanein, A (2003) Optimized scheduling of linear projects. Journal of Construction Engineering and Management, 129(6), pp. 664-673. ISSN 0733-9364

Moselhi, O and Khan, Z (2012) Significance ranking of parameters impacting construction labour productivity. Construction Innovation, 12(3), pp. 272-296. ISSN 1471-4175

Moselhi, O and Nicholas, M J (1990) Hybrid expert system for construction planning and scheduling. Journal of Construction Engineering and Management, 116(2), pp. 221-238. ISSN 0733-9364

Mostafavi, F; Tahsildoost, M; Zomorodian, Z S and Shahrestani, S S (2024) An interactive assessment framework for residential space layouts using pix2pix predictive model at the early-stage building design. Smart and Sustainable Built Environment, 13(4), pp. 809-827. ISSN 2046-6099

Mousavi, Milad (2025) Evolving and proactive risk modelling in underground working environments. PhD thesis, University of New South Wales, Australia.

Moynihan, G; Zhou, H and Cui, Q (2009) Stochastic modeling for pavement warranty cost estimation. Journal of Construction Engineering and Management, 135(5), pp. 352-359. ISSN 0733-9364

Muhammed, A; Folorunso, C O and Fadairo, G (2024) Assessment of sandcrete hollow blocks' thermal performance as a walling material for tropical buildings in Lokoja, Nigeria. International Journal of Building Pathology and Adaptation, 42(4), pp. 653-671. ISSN 23984708

Mun, H; Jeong, J; Jeong, J and Kumi, L (2025) Statistical hypothesis test approach considering workers' thermal comfort to determine nonworking days in different climate zones. Journal of Construction Engineering and Management, 151(9): 04025116, ISSN 0733-9364

Muslimin, R. and Brasier, N. (2026) An analysis of outdoor thermal comfort impact on pedestrian walking patterns at sub-hour timescales with agent-based modelling. Smart and Sustainable Built Environment, 15(3), pp. 1149-1176. ISSN 2046-6099

Mwanaki Alinaitwe, H (2008) Improvement of labour performance and productivity in Uganda's building industry. PhD thesis, Lund University, Sweden.

Nafe Assafi, M; Hoque, M I and Hossain, M M (2024) Investigating the causes of construction delay on the perspective of organization-sectors involved in the construction industry of Bangladesh. International Journal of Building Pathology and Adaptation, 42(4), pp. 788-817. ISSN 23984708

Naji, K K; Gunduz, M and Hamaidi, M F (2022) Major factors affecting construction waste management in infrastructure projects using structural equation model. Journal of Construction Engineering and Management, 148(10): 04022101, ISSN 0733-9364

Nakano, V M (2008) A design assessment system to protect buildings from internal chemical and biological threats. PhD thesis, Purdue University, USA.

Nardecchia, F; Mattoni, B; Burattini, C and Bisegna, F (2020) The impact of humidity on vortex creation around isolated buildings. Building Research & Information, 48(5), pp. 551-571. ISSN 0961-3218

Navon, R; Arkin, H and Burg, I (1997) Economic evaluation of HVAC systems with ice storage designed using an optimization technique. Construction Management and Economics, 15(5), pp. 429-439. ISSN 01446193

Neamat, S D; Haido, J H and Wardeh, G (2025) Investigating pozzolanic glass waste's role in reinforcing ultra-high-performance concrete beams for enhanced sustainability. International Journal of Building Pathology and Adaptation, 43(4), pp. 633-651. ISSN 2398-4708

Newsham, G R; Birt, B J; Arsenault, C; Thompson, A J L; Veitch, J A; Mancini, S; Galasiu, A D; Gover, B N; MacDonald, I A and Burns, G J (2013) Do green buildings have better indoor environments? New evidence. Building Research & Information, 41(4), pp. 415-434. ISSN 0961-3218

Nguyen, L D; Kneppers, J; García De Soto, B and Ibbs, W (2010) Analysis of adverse weather for excusable delays. Journal of Construction Engineering and Management, 136(12), pp. 1258-1267. ISSN 0733-9364

Nguyen, T T (2017) Modeling of CLT creep behavior and real-time hybrid simulation of a CLT-LiFS building. PhD thesis, University of Alabama, USA.

Nicol, J F; Hacker, J; Spires, B and Davies, H (2009) Suggestion for new approach to overheating diagnostics. Building Research & Information, 37(4), pp. 348-357. ISSN 0961-3218

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Nikolić, D (2011) Evaluating a simulation game in construction engineering education: The virtual construction simulator 3. PhD thesis, Pennsylvania State University, USA.

Nikoopayan Tak, M S; Bhattacharya, A; Metcalf, A R and Mousavi, E (2023) Cleanroom air quality: Combined effects of ventilation rate and filtration schemes in a laboratory cleanroom. Building Research & Information, 51(6), pp. 717-729. ISSN 0961-3218

Nimcharoenwon, P and Miller, G (2001) Combating the 'sick building syndrome' by improving indoor air quality. Construction Economics and Building, 1(2), pp. 82-89. ISSN 2204-9029

Nishida, Y and Hua, Y (2011) Motivating stakeholders to deliver change: Tokyo's cap-and-trade program. Building Research & Information, 39(5), pp. 518-533. ISSN 0961-3218

Nishida, Y; Hua, Y and Okamoto, N (2016) Alternative building emission-reduction measure: Outcomes from the Tokyo cap-and-trade program. Building Research & Information, 44(5-6), pp. 644-659. ISSN 0961-3218

Niveditha, M. and Palanisamy, T. (2026) Upcycling iron-rich industrial waste into a carbon-sequestering composite binder through optimized carbonation curing for structural applications. International Journal of Construction Management, 26(8), pp. 1471-1489. ISSN 1562-3599

Nkeleme, E I; Mbamali, I and Shakantu, W (2022) A measure of combustion-generated pollutants in university laboratories and their effects on the indoor air quality. Journal of Construction Business and Management, 5(2), pp. 44-53. ISSN 2521-0165

Noor, I (1992) A study of the variability of labour productivity in building trades. PhD thesis, University of Dundee, UK.

Nouri, H; Safehian, M and Mir Mohammad Hosseini, S M (2023) Life cycle assessment of earthen materials for low-cost housing a comparison between rammed earth and fired clay bricks. International Journal of Building Pathology and Adaptation, 41(2), pp. 364-377. ISSN 23984708

Nwagwu, C C; Akin, S and Hertwich, E G (2024) Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis. Buildings & Cities, 5(1), pp. 521-539. ISSN 2632-6655

Ochiai, C (2022) Windbreak stonewalls in a mountainous village of Japan: A case study of tsuchigoya in hongu-cho, tanabe city. International Journal of Disaster Resilience in the Built Environment, 13(2), pp. 197-210. ISSN 1759-5916

Odeyinka, H A and Lowe, J G (2000) An assessment of risk factors involved in modelling cash flow forecasting. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Odeyinka, H A and Yusif, A (1997) The causes and effects of construction delays on completion cost of housing projects in Nigeria. Journal of Financial Management of Property and Construction, 2(3), pp. 31-44. ISSN 1366-4387

Oladokun, T T (2016) Effects of climate change on commercial properties in Lagos state, Nigeria. African Journal of Built Environment Research, 1(1), pp. 15-27. ISSN 2414-0236

Olaniyi, O O (2017) Development of a facilities management framework for sustainable building practices in Nigeria. PhD thesis, University of Central Lancashire, UK.

Olanrewaju, A; Tan, Y Y and Soh, S N (2022) Defect characterisations in the Malaysian affordable housing. International Journal of Building Pathology and Adaptation, 40(4), pp. 539-568. ISSN 23984708

Ovararin, N (2001) Quantifying productivity loss due to field disruptions in masonry construction. PhD thesis, University of Texas at Austin, USA.

Owusu-Manu, D G; Ghansah, F A; Darko, A; Asiedu, R O and Edwards, D J (2020) Insurable and non-insurable risks in complex project deals: Case of the Ghanaian construction industry. Journal of Engineering, Design and Technology, 18(6), pp. 1971-1995. ISSN 1726-0531

Oyewole, M O; Ojutalayo, A A and Araloyin, F M (2019) Developers' willingness to invest in green features in Abuja, Nigeria. Smart and Sustainable Built Environment, 8(3), pp. 206-219. ISSN 2046-6099

Ozkan, A; Kesik, T; Yilmaz, A Z and O’Brien, W (2019) Development and visualization of time-based building energy performance metrics. Building Research & Information, 47(5), pp. 493-517. ISSN 0961-3218

O’Connor, J T; Rusch, S E and Schulz, M J (1987) Constructability concepts for engineering and procurement. Journal of Construction Engineering and Management, 113(2), pp. 235-248. ISSN 0733-9364

Padilla, E M and Carr, R I (1991) Resource strategies for dynamic project management. Journal of Construction Engineering and Management, 117(2), pp. 279-293. ISSN 0733-9364

Pakkala, T A; Köliö, A; Lahdensivu, J and Pentti, M (2019) Predicted corrosion rate on outdoor exposed concrete structures. International Journal of Building Pathology and Adaptation, 37(5), pp. 679-698. ISSN 23984708

Palaniappan, S (2009) Environmental performance of on-site construction processes in post-tensioned slab foundation construction: A study of production home building in the Greater Phoenix area. PhD thesis, Arizona State University, USA.

Pallubinsky, H; Kingma, B R M; Schellen, L; Dautzenberg, B; van Baak, M A and van Marken Lichtenbelt, W D (2017) The effect of warmth acclimation on behaviour, thermophysiology and perception. Building Research & Information, 45(7), pp. 800-807. ISSN 0961-3218

Palme, M; Inostroza, L and Salvati, A (2018) Technomass and cooling demand in South America: A superlinear relationship? Building Research & Information, 46(8), pp. 864-880. ISSN 0961-3218

Palmer, J; Bennetts, H; Pullen, S; Zuo, J; Ma, T and Chileshe, N (2014) The effect of dwelling occupants on energy consumption: The case of heat waves in Australia. Architectural Engineering and Design Management, 10(1-2), pp. 40-59. ISSN 1745-2007

Pan, N-F S (2001) Fuzzy reasoning expert scheduling system (FRESS) for highway construction subject to rain impact: A case study in Taiwan. PhD thesis, Ohio State University, USA.

Papachristos, G; Jain, N; Burman, E; Zimmermann, N; Wu, X; Liu, P; Mumovic, D; Lin, B; Davies, M and Edkins, A (2020) Low carbon building performance in the construction industry: A multi-method approach of system dynamics and building performance modelling. Construction Management and Economics, 38(9), pp. 856-876. ISSN 01446193

Park, K; Hwang, Y; Seo, S and Seo, H (2003) Quantitative assessment of environmental impacts on life cycle of highways. Journal of Construction Engineering and Management, 129(1), pp. 25-31. ISSN 0733-9364

Patcharachavalit, N; Limsawasd, C and Athigakunagorn, N (2023) Multiobjective optimization for improving sustainable equipment options in road construction projects. Journal of Construction Engineering and Management, 149(1): 04022160, ISSN 0733-9364

Pavitt, T C (2002) Managing construction interfaces within the building facade. PhD thesis, Loughborough University, UK.

Pavlovas, V (2006) Energy savings in existing Swedish apartment buildings: Some aspects on demand controlled ventilation and individual metering. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Pellegrini-Masini, G; Bowles, G; Peacock, A D; Ahadzi, M and Banfill, P F G (2010) Whole life costing of domestic energy demand reduction technologies: Householder perspectives. Construction Management and Economics, 28(3), pp. 217-229. ISSN 1466433X

Pelsmakers, S; Vereecken, E; Airaksinen, M and Elwell, C C A (2019) Void conditions and potential for mould growth in insulated and uninsulated suspended timber ground floors. International Journal of Building Pathology and Adaptation, 37(4), pp. 395-425. ISSN 23984708

Peng, Z; Deng, W and Hong, Y (2019) Materials consumption, indoor thermal comfort and associated energy flows of urban residential buildings: Case studies from the cold climate zone of China. International Journal of Building Pathology and Adaptation, 37(5), pp. 579-596. ISSN 23984708

Persily, A K; Gorfain, J and Brunner, G (2006) Survey of ventilation rates in office buildings. Building Research & Information, 34(5), pp. 459-466. ISSN 0961-3218

Persson, U (2009) Management of sustainability in construction works. PhD thesis, Lund University, Sweden.

Petkov, I (2022) Optimal decarbonization conditions for buildings & districts: A model-based techno-economic perspective. DSc thesis, ETH Zürich, Switzerland.

Phelan, R S; Radjy, F; Haas, C and Hendrickson, C (1990) Computer-aided concrete-placement optimization. Journal of Construction Engineering and Management, 116(1), pp. 172-187. ISSN 0733-9364

Pilgrim, M; Bouchlaghem, D; Loveday, D and Holmes, M (2002) Towards best practice in building analysis data representation. Construction Innovation, 2(2), pp. 117-130. ISSN 1471-4175

Piratla, K R and Ariaratnam, S T (2013) Design innovation leads to sustainable water distribution systems. Construction Innovation, 13(3), pp. 302-319. ISSN 1471-4175

Pivo, G (2014) Unequal access to energy efficiency in us multifamily rental housing: Opportunities to improve. Building Research & Information, 42(5), pp. 551-573. ISSN 0961-3218

Polanco-Guzmán, I; Rodríguez-Troncoso, M; Hammad, A W A; Haddad, A N; Tam, V W Y and Vasco, D A (2023) An improved ventilation system for settling stage of a wastewater treatment plant: A computational simulation analysis. International Journal of Construction Management, 23(2), pp. 205-224. ISSN 1562-3599

Popescu-Kohler, A I (1998) Improvements to construction delay analysis techniques. PhD thesis, University of Texas at Austin, USA.

Porritt, S M; Cropper, P C; Shao, L and Goodier, C I (2013) Heat wave adaptations for UK dwellings and development of a retrofit toolkit. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 269-286. ISSN 1759-5916

Poudel, O and Assaad, R H (2025) A real-time intelligent acoustic IoT-enabled embedded construction site monitoring and alert system: Integrating deep learning-based machine-listening algorithms, edge computing, and cloud computing. Journal of Construction Engineering and Management, 151(7): 04025075, ISSN 0733-9364

Prihatmanti, R and Bahauddin, A (2014) Indoor air quality in adaptively reused heritage buildings at a UNESCO world heritage site, Penang, Malaysia. Journal of Construction in Developing Countries, 19(1), pp. 69-91. ISSN 1823-6499

Pritchard, C (2005) Skin cancer prevention in the house building industry. PhD thesis, Nottingham Trent University, UK.

Purushothaman, M B and Kumar, S (2022) Environment, resources, and surroundings based dynamic project schedule model for the road construction industry in New Zealand. Smart and Sustainable Built Environment, 11(2), pp. 294-312. ISSN 2046-6099

Qi, J K; Yang, J Y; Oliver Hoon Leh, L; Edwards, R and Jamalunlaili, A (2021) Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD. Smart and Sustainable Built Environment, 10(1), pp. 18-36. ISSN 2046-6099

Raja, J (2016) Reducing the environmental impact of construction through use of geosynthetics. EngD thesis, Loughborough University, UK.

Raji, B (2018) Sustainable high-rises: Design strategies for energy-efficient and comfortable tall office buildings in various climates. PhD thesis, Delft University of Technology, Netherlands.

Ramalingam Rethnam, O. and Thomas, A. (2026) A physics-informed deep learning-based urban building thermal comfort modeling and prediction framework for identifying thermally vulnerable building stock. Smart and Sustainable Built Environment, 15(2), pp. 622-648. ISSN 2046-6099

Ramos, N M M and De Freitas, V P (2009) Experimental determination of the hygroscopic inertia of building materials. Building Research & Information, 37(3), pp. 293-299. ISSN 0961-3218

Rasheed, E. O. and Wang, K. (2026) Do overall findings correlate with granular findings? An analysis of factors influencing office workers' thermal comfort and indoor air quality. International Journal of Building Pathology and Adaptation, 44(5), pp. 1211-1231. ISSN 2398-4708

Rasheed, E O and Rotimi, J O B (2024) The green office environment: New Zealand workers' perception of IEQ. Smart and Sustainable Built Environment, 13(5), pp. 1240-1259. ISSN 2046-6099

Rasli, N B I; Ismail, M R; Ramli, N A; Shith, S; Nazir, A U M; Yusof, N F M and Zainordin, N S (2019) Compliance of indoor air contaminants within the main prayer halls of mosques in Malacca with Malaysia's indoor air quality standard. Journal of Construction in Developing Countries, 24(2), pp. 105-121. ISSN 1823-6499

Rasouli, S; Zhong, W; Singh, A K; Mohandes, S R; Antwi-Afari, M F; Cheung, C M and Manu, P (2024) The adoption of uav for construction safety management: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Rastogi, P; Laxo, A; Dewayne Cecil, L and Overbey, D (2022) Projected climate data for building design: Barriers to use. Buildings & Cities, 3(1), pp. 111-117. ISSN 2632-6655

Razem, M; Khalid, R and Sunikka-Blank, M (2025) Unveiling women's ventilation practices and comfort in Jordan: Video diaries as method for post-occupancy evaluation. Building Research & Information, 53(1-2), pp. 56-76. ISSN 0961-3218

Ren, Z; Chrysostomou, V and Price, T (2012) The measurement of carbon performance of construction activities: A case study of a hotel construction project in South Wales. Smart and Sustainable Built Environment, 1(2), pp. 153-171. ISSN 2046-6099

Rener, A T (2022) Innovative methodologies to enhance productivity, supply chain, and sustainability in industrialized construction. PhD thesis, Lawrence Technological University, USA.

Rezaei, Mohammad (2019) Characterizing controlled low-strength materials (CLSM) for narrow-trench reinstatement. PhD thesis, University of Alberta, Canada.

Rezaei Nasab, S S; Tayefi Nasrabadi, A; Asadi, S and Haj Seiyed Taghia, S A (2022) Investigating the probability of designing net-zero energy buildings with consideration of electric vehicles and renewable energy. Engineering, Construction and Architectural Management, 29(10), pp. 4061-4087. ISSN 0969-9988

Ribeiro, C; Pereira, P F; Ramos, N M M; Flores-Colen, I and Valentim, N (2024) Assessment of the impacts of balconies on indoor environmental quality in mild climate conditions, Portugal. Building Research & Information, 52(3), pp. 292-310. ISSN 0961-3218

Rintala, Kai M (2004) The economic efficiency of accommodation service PFI projects. PhD thesis, University College London, UK.

Roca-Puigròs, M; Billy, R G; Gerber, A; Wäger, P and Müller, D B (2020) Pathways toward a carbon-neutral Swiss residential building stock. Buildings & Cities, 1(1), pp. 579-593. ISSN 2632-6655

Rockett, P and Hathway, E A (2017) Model-predictive control for non-domestic buildings: A critical review and prospects. Building Research & Information, 45(5), pp. 556-571. ISSN 0961-3218

Rodger, D; Callaghan, N and Thomson, C (2018) Are retrofitted social houses sufficiently reflecting the holistic health and wellbeing requirements of older people? In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Rodriguez, C M; Medina, J M and Pinzón, A (2019) Thermal comfort and satisfaction in the context of social housing: Case study in Bogotá, Colombia. Journal of Construction in Developing Countries, 24(1), pp. 101-124. ISSN 1823-6499

Rose, W (2019) Must attic ventilation be preserved in energy retrofits? International Journal of Building Pathology and Adaptation, 37(4), pp. 461-472. ISSN 23984708

Rosenow, J; Fawcett, T; Eyre, N and Oikonomou, V (2016) Energy efficiency and the policy mix. Building Research & Information, 44(5-6), pp. 562-574. ISSN 0961-3218

Rosso, S (2007) Environmental life-cycle of domestic kitchen refurbishment. PhD thesis, University of Brighton, UK.

Royapoor, M (2015) An investigation into the energy and control implications of adaptive comfort in a modern office building. PhD thesis, University of Newcastle upon Tyne, UK.

Roza, C (2006) Environmental assessment: The Eden project. PhD thesis, University College London, UK.

Russell, M M (2013) Allocation of time buffer to construction project task durations. PhD thesis, North Carolina State University, USA.

Russell, M M; Howell, G; Hsiang, S M and Liu, M (2013) Application of time buffers to construction project task durations. Journal of Construction Engineering and Management, 139(10): 04013008, ISSN 0733-9364

Ryan, Peter William Joseph (2017) Unlocking the key to mega project delivery. PhD thesis, University of Melbourne, Australia.

Sacks, A; Nisbet, A; Ross, J and Harinarain, N (2012) Life cycle cost analysis: A case study of Lincoln on the Lake. Journal of Engineering, Design and Technology, 10(2), pp. 228-254. ISSN 1726-0531

Sadat, H and Thomas, N (2025) An integrated approach to investigate the causes of time delays and cost overruns in Afghanistan construction projects. International Journal of Construction Management, 25(6), pp. 624-634. ISSN 1562-3599

Saffar, N (2020) The development of an offsite construction adoption strategic guideline for the Iraqi construction industry. PhD thesis, University of Salford, UK.

Saha, Swapan Kumar (2002) Predicting realistic performance rate and optimum inspection rate in construction. PhD thesis, University of Western Sydney, Australia.

Sahebzadeh, S; Dalvand, Z; Sadeghfar, M and Heidari, A (2020) Vernacular architecture of Iran's hot regions; elements and strategies for a comfortable living environment. Smart and Sustainable Built Environment, 9(4), pp. 573-593. ISSN 2046-6099

Sajid, Z W; Khan, S A; Hussain, F; Ullah, F; Khushnood, R A and Soliman, N (2026) Assessing economic and environmental performance of infill materials through BIM: A life cycle approach. Smart and Sustainable Built Environment, 15(1), pp. 9-39. ISSN 2046-6099

Salat, S (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information, 37(5-6), pp. 598-609. ISSN 0961-3218

Sameh, R; Ismaeel, W S E and Othman, F (2021) Sustainable building renovation and indoor environmental quality. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Samo, S R (1999) Energy conservation in UK housing and the effect of building regulations. PhD thesis, University of Manchester, UK.

Sampson Mamphweli, N and Leroy Meyer, E (2013) Performance monitoring system for a biomass gasifier. Journal of Engineering, Design and Technology, 11(1), pp. 7-18. ISSN 1726-0531

Sanders, S R (1989) An analysis of factors affecting labor productivity in masonry construction. PhD thesis, Pennsylvania State University, USA.

Sanders, S R and Thomas, H R (1991) Factors affecting masonry-lahok productivity. Journal of Construction Engineering and Management, 117(4), pp. 626-644. ISSN 0733-9364

Sanna, F (2018) Timber modern methods of construction: a comparative study. PhD thesis, Edinburgh Napier University, UK.

Santoso, D S; Joewono, T B; Wibowo, A; Sinaga, H P A and Santosa, W (2012) Public-private partnerships for tollway construction and operation: Risk assessment and allocation from the perspective of investors. Journal of Construction in Developing Countries, 17(2), pp. 45-66. ISSN 1823-6499

Sari, L H; Kayan, B A and Zahriah, Z (2024) An assessment of indoor environmental quality in COVID-19 affected houses: A case study in Banda Aceh, Indonesia. International Journal of Building Pathology and Adaptation, 42(5), pp. 932-956. ISSN 2398-4708

Satwiko, P; Prasetya, A and Suhedi, F (2019) Noise-reducing vents for windows in warm, humid, tropical countries. Architectural Engineering and Design Management, 15(2), pp. 141-158. ISSN 1745-2007

Sayed Zayed, N.; Badawy Abu-Sena, A. B.; Attia, T. M. and Ahmed, A. (2026) Integrating recycled materials in road construction: A cost-effective and sustainable approach. International Journal of Construction Management, 26(7), pp. 1222-1238. ISSN 1562-3599

Sborz, J; Kalbusch, A and Henning, E (2024) Factors that determine hot and cold-water consumption in social housing apartments. Architectural Engineering and Design Management, 20(6), pp. 1669-1686. ISSN 1745-2007

Schafer, D W (2014) A conceptual framework for resilience engineering in construction safety. PhD thesis, Michigan State University, USA.

Schoenefeldt, H (2022) Technological transitions in climate control: Lessons from the House of Lords. Buildings & Cities, 3(1), pp. 68-92. ISSN 2632-6655

Schweiker, M and Wagner, A (2017) Influences on the predictive performance of thermal sensation indices. Building Research & Information, 45(7), pp. 745-758. ISSN 0961-3218

Schünemann, C; Olfert, A; Schiela, D; Gruhler, K and Ortlepp, R (2020) Mitigation and adaptation in multifamily housing: Overheating and climate justice. Buildings & Cities, 1(1), pp. 36-55. ISSN 2632-6655

Scott, S (1993) The nature and effects of construction delays. Construction Management and Economics, 11(5), pp. 358-369. ISSN 01446193

Scott, S and Harris, R A (2004) United Kingdom construction claims: Views of professionals. Journal of Construction Engineering and Management, 130(5), pp. 734-741. ISSN 0733-9364

Scrase, J I (2001) Curbing the growth in UK commercial energy consumption. Building Research & Information, 29(1), pp. 51-61. ISSN 0961-3218

Seibert, J E and Evans, G W (1991) Time-constrained resource leveling. Journal of Construction Engineering and Management, 117(3), pp. 503-520. ISSN 0733-9364

Selman, A D and Gade, A N (2020) Barriers of incorporating circular economy in building design in a Danish context. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Selman, A D; Heiselberg, H L and Gade, A N (2021) Attitudes towards using wood in the Danish building sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Selvam, G.; Kamalanandhini, M.; Velpandian, M.; Hariharan, R.; Mohanakrishna, S. and Thirumurugan, V. (2026) Integrated statutory waste management framework for the sustainable built environment. Engineering, Construction and Architectural Management, 33(5), pp. 4078-4097. ISSN 0969-9988

Seo, S and Hwang, Y (2001) Estimation of CO2 emissions in life cycle of residential buildings. Journal of Construction Engineering and Management, 127(5), pp. 414-418. ISSN 0733-9364

Seong, J; Kim, H s and Jung, H J (2025) Development of a robust hazardous area tracking algorithm for pan-tilt-zoom (ptz) cameras at construction sites under harsh conditions. Engineering, Construction and Architectural Management, 32(13), pp. 384-405. ISSN 0969-9988

Shahbodaghlou, F (1987) A feasibility model for use of weather protection in cold region construction. PhD thesis, Purdue University, USA.

Shahedi, F. and Abrishami, S. (2026) Adaptive construction scheduling with AI in 4D/5D BIM: Integrating weather data and activity-based costing. Smart and Sustainable Built Environment, pp. 1-15. ISSN 2046-6099

Shahin, A; Abourizk, S M and Mohamed, Y (2011) Modeling weather-sensitive construction activity using simulation. Journal of Construction Engineering and Management, 137(3), pp. 238-246. ISSN 0733-9364

Shahin, A A (2007) A framework for cold weather construction simulation. PhD thesis, University of Alberta, Canada.

Shalwani, A (2021) Empirical analysis of issue management in small vertical construction projects: Relationship between project performance, project team actions, and issue types. PhD thesis, University of Kansas, USA.

Shalwani, A and Lines, B C (2021) An empirical analysis of the causes of cost and schedule growth for small healthcare and educational construction projects. International Journal of Construction Education and Research, 17(3), pp. 277-296. ISSN 1557-8771

Shan, Y (2014) Integrated information modeling of construction project productivity. PhD thesis, University of Colorado at Boulder, USA.

Shashwat, S; Zingre, K and Thurairajah, N (2022) Enhancing building energy efficiency estimation by integrating microclimate conditions. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Shehadeh, A; Alshboul, O and Tamimi, M (2025) Quantitative analysis of climate-adaptive pavement technologies: Mitigating environmental impact and enhancing economic viability in urban infrastructure. Journal of Construction Engineering and Management, 151(6): 04025064, ISSN 0733-9364

Shehadeh, Ali (2019) Multi-objective optimization for construction equipment fleet selection and management in highway construction projects based on time, cost, and quality objectives. PhD thesis, University of Central Florida, USA.

Shepherd, S (2006) Evaluation of an engineering intervention to prevent silica exposures in construction. ScD thesis, University of Massachusetts Lowell, USA.

Shepherd, S and Woskie, S R (2010) Case study to identify barriers and incentives to implementing an engineering control for concrete grinding dust. Journal of Construction Engineering and Management, 136(11), pp. 1238-1248. ISSN 0733-9364

Sheykhi, R (2016) Risk-based decision making support for construction corporate resource management. PhD thesis, Florida International University, USA.

Shi, M; Chen, C; Xiao, B and Seo, J (2024) Vision-based detection method for construction site monitoring by integrating data augmentation and semisupervised learning. Journal of Construction Engineering and Management, 150(5): 04024027, ISSN 0733-9364

Shirong, L (1996) New approach for optimization of overall construction schedule. Journal of Construction Engineering and Management, 122(1), pp. 7-13. ISSN 0733-9364

Shooshtarian, S and Ridley, I (2016) Determination of acceptable thermal range in outdoor built environments by various methods. Smart and Sustainable Built Environment, 5(4), pp. 352-371. ISSN 2046-6099

Short, C A and Al-Maiyah, S (2009) Design strategy for low-energy ventilation and cooling of hospitals. Building Research & Information, 37(3), pp. 264-292. ISSN 0961-3218

Short, C A; Cook, M and Lomas, K J (2009) Delivery and performance of a low-energy ventilation and cooling strategy. Building Research & Information, 37(1), pp. 1-30. ISSN 0961-3218

Short, C A and Lomas, K J (2007) Exploiting a hybrid environmental design strategy in a US continental climate. Building Research & Information, 35(2), pp. 119-143. ISSN 0961-3218

Short, C A; Lomas, K J and Woods, A (2004) Design strategy for low-energy ventilation and cooling within an urban heat island. Building Research & Information, 32(3), pp. 187-206. ISSN 0961-3218

Short, C A; Noakes, C J; Gilkeson, C A and Fair, A (2014) Functional recovery of a resilient hospital type. Building Research & Information, 42(6), pp. 657-684. ISSN 0961-3218

Short, C A; Song, J; Mottet, L; Chen, S; Wu, J and Ge, J (2018) Challenges in the low-carbon adaptation of China's apartment towers. Building Research & Information, 46(8), pp. 899-930. ISSN 0961-3218

Short, C A; Whittle, G E and Owarish, M (2006) Fire and smoke control in naturally ventilated buildings. Building Research & Information, 34(1), pp. 23-54. ISSN 0961-3218

Short, C A; Woods, A W; Drumright, L; Zia, R and Mingotti, N (2022) An alternative approach to delivering safe, sustainable surgical theatre environments. Buildings & Cities, 3(1), pp. 316-333. ISSN 2632-6655

Shorthouse, E (2015) Climate change and buildings: the impact on human health. PhD thesis, University of Exeter, UK.

Sica, F; Tajani, F and Cerullo, G (2025) An evaluation model for an optimal decarbonisation process in the built environment. Built Environment Project and Asset Management, 15(1), pp. 51-66. ISSN 2044-124X

Sihabuddin, S S and Ariaratnam, S T (2009) Methodology for estimating emissions in underground utility construction operations. Journal of Engineering, Design and Technology, 7(1), pp. 37-64. ISSN 1726-0531

Simpson, S; Banfill, P; Haines, V; Mallaband, B and Mitchell, V (2016) Energy-led domestic retrofit: Impact of the intervention sequence. Building Research & Information, 44(1), pp. 97-115. ISSN 0961-3218

Singh Rajput, T and Thomas, A (2023) Optimizing passive design strategies for energy efficient buildings using hybrid artificial neural network (ann) and multi-objective evolutionary algorithm through a case study approach. International Journal of Construction Management, 23(13), pp. 2320-2332. ISSN 1562-3599

Smith, C; Drinkwater, A; Modlich, M; Horst, D V D and Doherty, R (2024) IAQ and environmental health literacy: Lived experiences of vulnerable people. Buildings & Cities, 5(1), pp. 231-246. ISSN 2632-6655

Smith, G R (1986) A conceptual construction project planning model (fuzzy sets, networks). PhD thesis, Purdue University, USA.

Smith, G R and Hancher, D E (1989) Estimating precipitation impacts for scheduling. Journal of Construction Engineering and Management, 115(4), pp. 552-566. ISSN 0733-9364

Sodagar, B; Rai, D; Jones, B; Wihan, J and Fieldson, R (2011) The carbon-reduction potential of straw-bale housing. Building Research & Information, 39(1), pp. 51-65. ISSN 0961-3218

Sommerville, J; Craig, N and Callaghan, N (2011) Consumer demand for zero carbon homes within the UK. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Song, J; Fan, S; Lin, W; Mottet, L; Woodward, H; Davies Wykes, M; Arcucci, R; Xiao, D; Debay, J E; ApSimon, H; Aristodemou, E; Birch, D; Carpentieri, M; Fang, F; Herzog, M; Hunt, G R; Jones, R L; Pain, C; Pavlidis, D; Robins, A G; Short, C A and Linden, P F (2018) Natural ventilation in cities: The implications of fluid mechanics. Building Research & Information, 46(8), pp. 809-828. ISSN 0961-3218

Spangenberg, S; Hannerz, H and Tüchsen, F (2005) Hospitalized injuries among bridge and tunnel construction workers. Construction Management and Economics, 23(3), pp. 237-240. ISSN 01446193

Spentzou, E; Cook, M J and Emmitt, S (2022) Low-energy cooling and ventilation refurbishments for buildings in a mediterranean climate. Architectural Engineering and Design Management, 18(4), pp. 473-494. ISSN 1745-2007

Spigliantini, G; Fabi, V; Schweiker, M and Corgnati, S (2019) Historical buildings' energy conservation potentialities: A methodology focused on building operation. International Journal of Building Pathology and Adaptation, 37(3), pp. 306-325. ISSN 23984708

Stellacci, S; Domingos, L and Resende, R (2024) Integrated computational approaches for energy retrofit of historical buildings in extreme climate environments. International Journal of Building Pathology and Adaptation, 42(1), pp. 114-132. ISSN 23984708

Stenbeck, T (2007) Promoting innovation in transportation infrastructure maintenance: Incentives contracting and performance based specifications. PhD thesis, KTH Royal Institute of Technology, Sweden.

Stephen, S.; Bello, J.; Aigbavboa, C.; Oke, A. E.; Adekunle, S. and Tambwe, O. (2026) Bibliometric review of gyroscopic mechanisms for adaptive indoor environmental quality control in buildings. Built Environment Project and Asset Management, pp. 1-17. ISSN 2044-124X

Stevens, J D and Murray, A L (1994) Modified roof erection system. Journal of Construction Engineering and Management, 120(4), pp. 828-837. ISSN 0733-9364

Stringer, A; Dunne, J and Boussabaine, H (2012) Schools design quality: A user perspective. Architectural Engineering and Design Management, 8(4), pp. 257-272. ISSN 1745-2007

Struck, C (2012) Uncertainty propagation and sensitivity analysis techniques in building performance simulation to support conceptual building and system design. PhD thesis, Eindhoven University of Technology, Netherlands.

Su, Y S (2017) Rebuild, retreat or resilience: Urban flood vulnerability analysis and simulation in Taipei. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 110-122. ISSN 1759-5916

Su, Y-Y (2010) Construction crew productivity monitoring supported by location awareness technologies. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Sudarsan, J S; Rajprasad, J; V. Gedam, V; A. Abhyankar, A; S. Sriram, N and Dharaskar, S (2026) Resilient and sustainable construction industry: Leveraging crisis and lean management. International Journal of Construction Management, 26(2), pp. 219-233. ISSN 1562-3599

Summa, S.; Mircoli, A.; Potena, D.; Ulpiani, G.; Diamantini, C. and Di Perna, C. (2022) Combining artificial intelligence and building engineering technologies towards energy efficiency: The case of ventilated façades. Construction Innovation, 24(7), pp. 44-64. ISSN 1471-4175

Sunikka-Blank, M; Galvin, R and Behar, C (2018) Harnessing social class, taste and gender for more effective policies. Building Research & Information, 46(1), pp. 114-126. ISSN 0961-3218

Sędzicki, D.; Nyka, L. and Cudzik, J. (2026) Algorithmic optimization of climbing plant positioning and cnc fabrication for urban microclimate enhancement. Building Research & Information, 54(5), pp. 588-610. ISSN 0961-3218

Taleb, H M and Abumoeilak, L (2021) An assessment of different courtyard configurations in urban communities in the United Arab Emirates. Smart and Sustainable Built Environment, 10(1), pp. 67-89. ISSN 2046-6099

Tan, A H (2015) While stands the colosseum: A ground-up exploration of ancient Roman construction techniques using virtual reality. PhD thesis, Ohio State University, USA.

Tangwe, S and Simon, M (2019) Quantification of the viability of residential air source heat pump water heaters as potential replacement for geysers in South Africa. Journal of Engineering, Design and Technology, 17(2), pp. 456-470. ISSN 1726-0531

Tangwe, S L; Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(4), pp. 739-751.

Tantasavasdi, C; Arttamart, S and Inprom, N (2025) Combined wind catchers and side windows for cross ventilation in row houses. Journal of Engineering, Design and Technology, 23(3), pp. 1039-1056. ISSN 1726-0531

Taylor, J; Simpson, C H; Vanhatalo, J; Sohail, H; Brousse, O and Heaviside, C (2025) Analysing cold-climate urban heat islands using personal weather station data. Buildings & Cities, 6(1), pp. 182-200. ISSN 2632-6655

Teixeira, Carla Fernanda Barbosa (2013) Analysis thermal performance of fiber cement tiles treated with white coatings and submitted to water spraying. PhD thesis, Universidade Estadual de Campinas, Brazil.

Tejero-González, A; DeFreitas-Barros-Galvão, V M; Zarzuelo-Sánchez, A M and SanJosé-Alonso, J F (2021) Energy use optimization in ventilation of operating rooms during inactivity periods. Building Research & Information, 49(3), pp. 308-324. ISSN 0961-3218

Teli, D; James, P A B and Jentsch, M F (2015) Investigating the principal adaptive comfort relationships for young children. Building Research & Information, 43(3), pp. 371-382. ISSN 0961-3218

Thomas, H R; Riley, D R and Sanvido, V E (1999) Loss of labor productivity due to delivery methods and weather. Journal of Construction Engineering and Management, 125(1), pp. 39-46. ISSN 0733-9364

Thomas, H R and Yiakoumls, I (1987) Factor model of construction productivity. Journal of Construction Engineering and Management, 113(4), pp. 623-639. ISSN 0733-9364

Thomas, J; Giddings, B and Little, L (2006) An holistic evaluation of the workplace environment. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Thomas, L E (2017) Combating overheating: Mixed-mode conditioning for workplace comfort. Building Research & Information, 45(1-2), pp. 176-194. ISSN 0961-3218

Thompson, O (2020) Towards a comprehensive understanding of human behaviour in dwelling fires. PhD thesis, University of Greenwich, UK.

Thorpe, D and Karan, E (2008) Method for calculating schedule delay considering weather conditions. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Tillson, A A; Oreszczyn, T and Palmer, J (2013) Assessing impacts of summertime overheating: Some adaptation strategies. Building Research & Information, 41(6), pp. 652-661. ISSN 0961-3218

Toledo, L; Wright, A and Cropper, P (2025) Case study investigation of overheating in low-energy homes: Insights from a post-occupancy evaluation in England. Building Research & Information, 53(1-2), pp. 139-164. ISSN 0961-3218

Tomrukçu, G and Ashrafian, T (2024) Energy-efficient building design under climate change adaptation process: A case study of a single-family house. International Journal of Building Pathology and Adaptation, 42(4), pp. 553-575. ISSN 23984708

Towner, M and Baccarini, D (2008) Risk pricing in construction tenders: how, who, what. Construction Economics and Building, 8(1), pp. 49-60. ISSN 2204-9029

Tran, D H; Tran, K N and Nguyen, N H (2025) A novel hybrid multiple objective optical microscope algorithm for fuzzy time, cost, and quality tradeoff in project management. International Journal of Construction Management, 25(10), pp. 1141-1153. ISSN 1562-3599

Trinh, Hoang T (2021) Optimisation framework for sustainable design of concrete buildings. PhD thesis, Griffith University, Australia.

Tweed, C (2013) Socio-technical issues in dwelling retrofit. Building Research & Information, 41(5), pp. 551-562. ISSN 0961-3218

Usman, A M and Abdullah, K (2024) Development of comprehensive energy usage impact and carbon footprint parameters for green building life cycle assessment. Journal of Engineering, Design and Technology, 22(4), pp. 1057-1081. ISSN 1726-0531

V Nithyapriyadharshini (2017) A study on the workplace issues faced by women labours in the construction industry in Chennai city. PhD thesis, Mother Teresa Womens University, India.

Vargas, G; Lawrence, R and Stevenson, F (2017) The role of lobbies: Short-term thermal transitions. Building Research & Information, 45(7), pp. 759-782. ISSN 0961-3218

Velasco, E and Segovia, E (2024) Effectiveness of equipping bus stop shelters with cooling and filtering systems in a city with tropical climate. Smart and Sustainable Built Environment, 13(5), pp. 1330-1345. ISSN 2046-6099

Vellei, M; Ramallo-González, A P; Coley, D; Lee, J; Gabe-Thomas, E; Lovett, T and Natarajan, S (2017) Overheating in vulnerable and non-vulnerable households. Building Research & Information, 45(1-2), pp. 102-118. ISSN 0961-3218

Vieira, Luiz de Brito Prado (2020) Analysis of technologies for recycling the waste generated in concrete production in ready mixed concrete plants. PhD thesis, Universidade de São Paulo, Brazil.

Vieira, P M d S (2007) Environmental assessment of office buildings. PhD thesis, University of California, Berkeley, USA.

Vishwanathan, S S; Fragkos, P; Fragkiadakis, K; Paroussos, L and Garg, A (2019) Energy system transitions and macroeconomic assessment of the Indian building sector. Building Research & Information, 47(1), pp. 38-55. ISSN 0961-3218

Volpintesta, Francesco (2024) New eco-sustainable construction materials derived from industrial wastes. PhD thesis, Università degli Studi di Camerino, Italy.

Wagle, S; Gopalakrishnan, B; Li, H; Liu, Z; Chaudhari, S and Sundaramoorthy, S (2024) Simulating energy performance of buildings: a study using eQUEST and Energy Star® portfolio manager. Architectural Engineering and Design Management, 20(5), pp. 997-1018. ISSN 1745-2007

Walshaw, D (1991) Statistical analysis of wind speeds. PhD thesis, University of Sheffield, UK.

Wambeke, B W; Hsiang, S M and Liu, M (2011) Causes of variation in construction project task starting times and duration. Journal of Construction Engineering and Management, 137(9), pp. 663-677. ISSN 0733-9364

Wambeke, B W; Liu, M and Hsiang, S M (2012) Using last planner and a risk assessment matrix to reduce variation in mechanical related construction tasks. Journal of Construction Engineering and Management, 138(4), pp. 491-498. ISSN 0733-9364

Wandahl, S; Pérez, C T; Salling, S; Neve, H H; Lerche, J and Petersen, S (2021) The impact of construction labour productivity on the renovation wave. Construction Economics and Building, 21(3), pp. 11-32. ISSN 2204-9029

Wang, H-H (2010) A context-based representation and reasoning formalism to support construction safety planning. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Wang, J; Wang, G; Li, H; Han, S and Zhang, J (2024) Intelligent construction activity identification for all-weather site monitoring using 4D millimeter-wave technology. Journal of Construction Engineering and Management, 150(11): 04024150, ISSN 0733-9364

Wang, W C and Demsetz, L A (2000) Model for evaluating networks under correlated uncertainty: netcor. Journal of Construction Engineering and Management, 126(6), pp. 458-466. ISSN 0733-9364

Wang, Y; Zhu, S and Wong, A S T (2014) Cooling time estimation of newly placed hot-mix asphalt pavement in different weather conditions. Journal of Construction Engineering and Management, 140(5): 04014009, ISSN 0733-9364

Wedawatta, H G (2013) Resilience of construction SMEs to extreme weather events. PhD thesis, University of Salford, UK.

Weerasinghe, A S; Ramachandra, T and Nawarathna, A (2019) Effects of green retrofits: A case of industrial manufacturing buildings in Sri Lanka. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Weerasinghe, A S; Ramachandra, T and Thurairajah, N (2017) Life cycle cost analysis: Green vs conventional buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Weerasinghe, A S; Rasheed, E O and Rotimi, J O B (2021) A dilemma between building indoor environment preferences and occupant energy behaviours. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Wei, L; Liu, G; Liu, W; Li, W and Yuan, Y (2023) Airborne infection risk in classrooms based on environment and occupant behavior measurement under COVID-19 epidemic. Building Research & Information, 51(6), pp. 701-716. ISSN 0961-3218

Weiss, T (2021) Energy flexibility and shiftable heating power of building components and technologies. Smart and Sustainable Built Environment, 10(4), pp. 740-758. ISSN 2046-6099

Westberg, K; Norén, J and Kus, H (2001) On using available environmental data in service life estimations. Building Research & Information, 29(6), pp. 428-439. ISSN 0961-3218

White, R R (2004) Managing and interpreting uncertainty for climate change risk. Building Research & Information, 32(5), pp. 438-448. ISSN 0961-3218

Wiguna, I P A (2005) The influence of risk on project performance in Indonesian building contracts. PhD thesis, University of Newcastle upon Tyne, UK.

Wiguna, I P A and Scott, S (2005) Nature of the critical risk factors affecting project performance in Indonesian building contracts. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Williams, K; Gupta, R; Hopkins, D; Gregg, M; Payne, C; Joynt, J L R; Smith, I and Bates-Brkljac, N (2013) Retrofitting England's suburbs to adapt to climate change. Building Research & Information, 41(5), pp. 517-531. ISSN 0961-3218

Williams, R C; Hildreth, J C and Vorster, M C (2009) Highway construction data collection and treatment in preparation for statistical regression analysis. Journal of Construction Engineering and Management, 135(12), pp. 1299-1306. ISSN 0733-9364

Woldesenbet, A; Jeong, D H S and Oberlender, G D (2012) Daily work reports-based production rate estimation for highway projects. Journal of Construction Engineering and Management, 138(4), pp. 481-490. ISSN 0733-9364

Wu, P (2011) Application of the lean philosophy to reduce carbon emissions in the precast concrete industry of Singapore. PhD thesis, National University of Singapore, Singapore.

Wurthmann, K A (2023) Designing photovoltaic arrays for groundwater pumping for remote agriculture using synthetically generated daily rainfall and irrigation needs. Journal of Engineering, Design and Technology, 21(6), pp. 1803-1826. ISSN 1726-0531

Xiang, Jianjun (2014) Extreme heat and workers' health in South Australia: Association, perceptions, and adaptations in the workplace. PhD thesis, University of Adelaide, Australia.

Xu, W; Cong, J and Proverbs, D G (2023) Evaluation of infrastructure resilience. International Journal of Building Pathology and Adaptation, 41(2), pp. 378-400. ISSN 23984708

Yakovlev, G I; Gordina, A; Drochytka, R; Buryanov, A F and Smirnova, O (2021) Structure and properties of modified gypsum binder. Smart and Sustainable Built Environment, 10(4), pp. 702-710. ISSN 2046-6099

Yang, Y.; Luo, H. and Adibhesami, M. A. (2026) Climate and performance-driven architectural floorplan optimization using deep graph networks. Engineering, Construction and Architectural Management, 33(3), pp. 2400-2421. ISSN 0969-9988

Yi, Yanqing (2025) New model for integration life cycle assessment and system dynamics to support the process of construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Yin, Y-J (2010) Risk analysis of light-frame wood construction due to multiple hazards. PhD thesis, Michigan Technological University, USA.

Yip, B; Rowlinson, S and Siu, O L (2008) Coping strategies as moderators in the relationship between role overload and burnout. Construction Management and Economics, 26(8), pp. 871-882. ISSN 01446193

Yip, B L P (2007) Job burnout among construction professionals in Hong Kong: A moderator model with coping strategies. PhD thesis, University of Hong Kong, Hong Kong.

Yogeswaran, K; Kumaraswamy, M M and Miller, D R A (1998) Claims for extensions of time in civil engineering projects. Construction Management and Economics, 16(3), pp. 283-293. ISSN 01446193

Young-Corbett, D E (2014) Prevention through design: Health hazards in asphalt roofing. Journal of Construction Engineering and Management, 140(9): 06014007, ISSN 0733-9364

Yousefi, Y; Jahangiri, M; Alidadi Shamsabadi, A and Raeesi Dehkordi, A (2019) Designing a mediator space and the study of its effect on the energy consumption of a residential building using EnergyPlus software in Savadkuh, Iran. Journal of Engineering, Design and Technology, 17(4), pp. 833-846. ISSN 1726-0531

Yuan, Z; Li, Z; Lei, Z; Yang, Y; Zhang, W; Lin, W and Cao, L (2025) Enhancing the production performance of prefabricated buildings through the integrated optimization of precast component layout and worker allocation. Journal of Construction Engineering and Management, 151(2): 04024200, ISSN 0733-9364

Yun, G Y (2008) Occupant behaviour in buildings: Thermal performance implications of window use patterns. PhD thesis, University of Cambridge, UK.

Yun, G Y; Steemers, K and Baker, N (2008) Natural ventilation in practice: Linking facade design, thermal performance, occupant perception and control. Building Research & Information, 36(6), pp. 608-624. ISSN 0961-3218

Yung, P and Agyekum-Mensah, G (2012) Productivity losses in smoking breaks on construction sites: A case study. Engineering, Construction and Architectural Management, 19(6), pp. 636-646. ISSN 0969-9988

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Zafaranchi, M and Sözer, H (2024) Comparing energy profiles of different building types by determining their sensitivities. Architectural Engineering and Design Management, 20(6), pp. 1489-1510. ISSN 1745-2007

Zaferanchi, M and Sozer, H (2024) Effectiveness of interventions to convert the energy consumption of an educational building to zero energy. International Journal of Building Pathology and Adaptation, 42(4), pp. 485-509. ISSN 23984708

Zahraie, B and Tavakolan, M (2009) Stochastic time-cost-resource utilization optimization using nondominated sorting genetic algorithm and discrete fuzzy sets. Journal of Construction Engineering and Management, 135(11), pp. 1162-1171. ISSN 0733-9364

Zayed, T and Mohamed, E (2014) A case productivity model for automatic climbing system. Engineering, Construction and Architectural Management, 21(1), pp. 33-50. ISSN 0969-9988

Zeiler, W; Vissers, D; Maaijen, R and Boxem, G (2014) Occupants' behavioural impact on energy consumption: 'Human-in-the-loop' comfort process control. Architectural Engineering and Design Management, 10(1-2), pp. 108-130. ISSN 1745-2007

Zhang, J.; Saberian, M.; Roychand, R.; Li, J.; Li, C. Q.; Zhang, G. and Robert, D. (2026) Carbon footprint reduction in concrete using spent coffee grounds biochar: A life cycle perspective. International Journal of Construction Management, 26(10), pp. 2137-2153. ISSN 1562-3599

Zhang, Z.; Wang, Y.; Liu, J.; Wang, Y.; Liu, C. and Geng, X. (2026) Transport risk assessment for China's prefabricated construction supply chain: Integrating game theory and fuzzy Bayesian network. Engineering, Construction and Architectural Management, pp. 1-24. ISSN 0969-9988

Zhang, G and Yang, J (2006) Factors influencing the implementation of the raised floor system in Australian office buildings. Construction Management and Economics, 24(5), pp. 529-543. ISSN 1466433X

Zhang, H; Arens, E and Pasut, W (2011) Air temperature thresholds for indoor comfort and perceived air quality. Building Research & Information, 39(2), pp. 134-144. ISSN 0961-3218

Zhang, J; Zhou, Q and Zhang, S (2022) Case study of field application of prefabricated anchoring frame beam structure in slope supporting projects. Journal of Construction Engineering and Management, 148(9): 05022008, ISSN 0733-9364

Zhang, X (2018) Sustainable retrofitting of existing residential buildings at community scale in China. PhD thesis, Cardiff University, UK.

Zhang, Z; Zhang, Y and Jin, L (2017) Thermal comfort of rural residents in a hot-humid area. Building Research & Information, 45(1-2), pp. 209-221. ISSN 0961-3218

Zhao, B; Yu, Y; Xu, Y and Guo, H (2024) Bamboo as a sustainable construction material for residential buildings in the cold and severe cold regions of China. Architectural Engineering and Design Management, 20(6), pp. 1511-1528. ISSN 1745-2007

Zheng, D X M and Ng, S T (2005) Stochastic time-cost optimization model incorporating fuzzy sets theory and nonreplaceable front. Journal of Construction Engineering and Management, 131(2), pp. 176-186. ISSN 0733-9364

Zhou, B; Xue, Y; Li, M; Li, Z; Zhang, X and Tao, Y (2018) Longitudinal jet ventilation calculation and application of long highway tunnel. Journal of Engineering, Design and Technology, 16(2), pp. 256-269. ISSN 1726-0531

Zhu, J; Zhang, C; Yuan, J; Pan, W; Xue, J and Lou, F (2025) An improved model for precast component transportation scheduling under dynamic traffic and weather conditions. Journal of Construction Engineering and Management, 151(11): 04025181, ISSN 0733-9364

Zhu, W; Li, J; Shen, K and Li, X (2025) Carbon dioxide emission reduction assessments of recycled aggregate concrete applications for infrastructure by incorporating vegetation carbon sink. Journal of Construction Engineering and Management, 151(9): 04025132, ISSN 0733-9364

Zhuravchak, R; Nord, N and Brattebø, H (2022) The effect of building attributes on the energy performance at a scale: An inferential analysis. Building Research & Information, 50(6), pp. 662-680. ISSN 0961-3218

Zuluaga Santa, C M (2018) Protecting bridge maintenance workers: Evaluating fall protection supplementary devices using virtual prototyping and wearable technology. PhD thesis, North Carolina State University, USA.

de Gier, A; Gottlieb, S C and Frederiksen, N (2025) Construction clients as drivers of change? How communities filter institutional pressures for sustainability. Construction Management and Economics, 43(8), pp. 599-616. ISSN 0144-6193

de Souza, L. P.; Melo, A. P.; Triana, M. A. and Lamberts, R. (2026) Thermal resilience and life cycle assessment of social housing: A discussion about limitations in Brazil. Architectural Engineering and Design Management, 22(2), pp. 382-401. ISSN 1745-2007

Çepni, M. S.; Kutluca, A. K.; Salihoğlu, T.; Atmaca, A. and Mintemur, S. (2026) Changing land-use metrics in mass housing: Türkiye case study. Buildings & Cities, 7(1), pp. 541-558. ISSN 2632-6655

Ürge-Vorsatz, D; Harvey, L D D; Mirasgedis, S and Levine, M D (2007) Mitigating CO2 emissions from energy use in the world's buildings. Building Research & Information, 35(4), pp. 379-398. ISSN 0961-3218

Ürge-Vorsatz, D; Koeppel, S and Mirasgedis, S (2007) Appraisal of policy instruments for reducing buildings' CO2 emissions. Building Research & Information, 35(4), pp. 458-477. ISSN 0961-3218