Journal of Engineering, Design and Technology - Volume 14

Georgiou, A; Haritos, G; Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(1), pp. 115-133.

Vidyadhar, R; Sudeep, K R; Vinodh, S and Antony, J (2016) Application of fuzzy logic for leanness assessment in SMEs: A case study. Journal of Engineering, Design and Technology, 14(1), pp. 78-103.

Rohdin, P; Dalewski, M and Moshfegh, B (2016) Combining a survey approach and energy and indoor environment auditing in historic buildings. Journal of Engineering, Design and Technology, 14(1), pp. 182-195.

Dang, C N and Le-Hoai, L (2016) Critical success factors for implementation process of design-build projects in Vietnam. Journal of Engineering, Design and Technology, 14(1), pp. 17-32.

Sharifi, Y and Aviz, H (2016) Effect of outrigger-belt truss location on the dynamic response of high-rise building subjected to blast loading. Journal of Engineering, Design and Technology, 14(1), pp. 54-77.

Shiue, I (2016) Future urban design strategies for health and wellbeing: Proposal of DIDID action plan and design mapping. Journal of Engineering, Design and Technology, 14(1), pp. 104-114.

Harinarain, N and Haupt, T C (2016) Mission: Studio based learning in construction. The University of KwaZulu-Natal case study. Journal of Engineering, Design and Technology, 14(1), pp. 160-181.

Ali Khan, M S; Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(1), pp. 196-210.

Asjad, M; Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(1), pp. 33-53.

Vinodh, S and Sharath, K T (2016) A case study on applying creative design concepts to brake rotor design. Journal of Engineering, Design and Technology, 14(1), pp. 2-16.

Chen, H-Y; Chang, Y-M and Chang, H-C (2016) A numerical definition-based systematic design approach for coupling consumers' image perception with product form. Journal of Engineering, Design and Technology, 14(1), pp. 134-159.

Ikediashi, D I and Ogwueleka, A C (2016) Assessing the use of ICT systems and their impact on construction project performance in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(2), pp. 252-276.

Huang, J-Y and Siao, S-T (2016) Development of an integrated bionic design system. Journal of Engineering, Design and Technology, 14(2), pp. 310-327.

Madhlopa, A (2016) Effect of controlling airflow in a solar chimney on thermal load in a built environment. Journal of Engineering, Design and Technology, 14(2), pp. 286-309.

Bulsara, M A; Hingu, A D and Vaghasiya, P S (2016) Energy loss due to unbalance in rotor–shaft system. Journal of Engineering, Design and Technology, 14(2), pp. 277-285.

Kakitahi, J M; Alinaitwe, H M; Landin, A and Mone, S J (2016) Impact of construction-related rework on selected Ugandan public projects. Journal of Engineering, Design and Technology, 14(2), pp. 238-251.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(2), pp. 373-419.

Huang, W; Xu, J; Zhu, D; Liu, C; Lu, J and Lu, K (2016) Multi-objective optimization of composite two-stage vibration isolation system for sensitive equipment. Journal of Engineering, Design and Technology, 14(2), pp. 343-361.

Sutton, K; Williams, A; Tremain, D and Kilgour, P (2016) University entry score: Is it a consideration for spatial performance in architecture design students? Journal of Engineering, Design and Technology, 14(2), pp. 328-342.

Shafabakhsh, G A; Kashi, E and Akbari, A (2016) A comparison effect of aircraft main gear configuration on runway damages by led and fe method. Journal of Engineering, Design and Technology, 14(2), pp. 362-372.

Oyewobi, L O; Abiola-Falemu, O and Ibironke, O T (2016) The impact of rework and organisational culture on project delivery. Journal of Engineering, Design and Technology, 14(2), pp. 214-237.

Jaiganesh, V and Prakasan, K (2016) Comparison of flow behaviour in pressurized gating systems using water models and numerical simulation. Journal of Engineering, Design and Technology, 14(3), pp. 652-674.

Jayakrishna, K; Girubha, R J and Vinodh, S (2016) Comparison of sustainability characteristics of conventional and CNC turning processes: A case study. Journal of Engineering, Design and Technology, 14(3), pp. 422-445.

Zhao, Z-Y; Zhao, X-J; Zuo, J and Zillante, G (2016) Corporate social responsibility for construction contractors: A China study. Journal of Engineering, Design and Technology, 14(3), pp. 614-640.

Hassan, O A B (2016) Effect of foundation designs of passive house on the thermal bridges at the ground. Journal of Engineering, Design and Technology, 14(3), pp. 602-613.

Booker, J D; Lock, R; Williamson, S and Freire, G J (2016) Effective practices for the concept design of electromechanical systems. Journal of Engineering, Design and Technology, 14(3), pp. 489-506.

Nganpet, N G and Biermann, E (2016) Image compression system for a 3U CubeSat. Journal of Engineering, Design and Technology, 14(3), pp. 446-460.

Dada, J O and Musa, N A (2016) Key factors affecting the competence of quantity surveyors: Evidence from construction industry stakeholders in Nigeria. Journal of Engineering, Design and Technology, 14(3), pp. 461-474.

Powell, R I and Copping, A G (2016) Measuring fatigue-related impairment in the workplace. Journal of Engineering, Design and Technology, 14(3), pp. 507-525.

Ogwueleka, A C and Maritz, M J (2016) Modeling for incentive payoffs in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(3), pp. 543-562.

Upadhyay, A K and Jain, K (2016) Modularity in nuclear power plants: A review. Journal of Engineering, Design and Technology, 14(3), pp. 526-542.

Ayeleso, A O and van Zyl, R R (2016) Photocurrents obtained from a triple planar probe sensor for in situ extreme ultraviolet (euv) radiation measurements on low earth orbiting cubesats. Journal of Engineering, Design and Technology, 14(3), pp. 641-651.

Msomi, V and Oliver, G J (2016) Smart morphing based on shape memory alloy plate. Journal of Engineering, Design and Technology, 14(3), pp. 475-488.

Owusu-Manu, D; Pärn, E A; Donkor-Hyiaman, K; Edwards, D J and Blackhurst, K (2016) The relative importance of mortgage pricing determinants in mortgage affordability in Ghana: An ex post attribution. Journal of Engineering, Design and Technology, 14(3), pp. 563-579.

Al Nasseri, H A; Widen, K and Aulin, R (2016) A taxonomy of planning and scheduling methods to support their more efficient use in construction project management. Journal of Engineering, Design and Technology, 14(3), pp. 580-601.

Kumar, S (2016) Assessment and selection of psychological attributes: Design team perspectives. Journal of Engineering, Design and Technology, 14(4), pp. 874-896.

Owusu-Manu, D-G; John, E D; Adesi, M; Badu, E and Love, P E D (2016) Attaining fairness in construction cost consultancy pricing services: A case study in Ghana. Journal of Engineering, Design and Technology, 14(4), pp. 699-712.

Azman, M A (2016) Bidding competitiveness: A comparative analysis of different bid auctions in Malaysia. Journal of Engineering, Design and Technology, 14(4), pp. 678-698.

Tangwe, S L; Simon, M and Meyer, E L (2016) Design of a heat pump water heater performance monitoring system: To determine performance of a split type system. Journal of Engineering, Design and Technology, 14(4), pp. 739-751.

Alqahtani, A and Whyte, A (2016) Evaluation of non-cost factors affecting the life cycle cost: An exploratory study. Journal of Engineering, Design and Technology, 14(4), pp. 818-834.

Sibanda, M and van Zyl, R R (2016) Practical electromagnetic compatibility studies of a cubesat. Journal of Engineering, Design and Technology, 14(4), pp. 770-780.

Oyewobi, L O; Windapo, A and Rotimi, J O B (2016) Relationship between decision-making style, competitive strategies and organisational performance among construction organisations. Journal of Engineering, Design and Technology, 14(4), pp. 713-738.

Fuentes-Del-Burgo, J and Navarro-Astor, E (2016) What is engineering education for? Listening to the voices of some Spanish building engineers. Journal of Engineering, Design and Technology, 14(4), pp. 897-919.

Louw, M P (2016) The adaptive reuse of industrial structures: Revisiting the Thesen Islands power station project in South Africa. Journal of Engineering, Design and Technology, 14(4), pp. 920-940.

Arjun, R A S and Vinodh, S (2016) A case study on application of oreste for agile concept selection. Journal of Engineering, Design and Technology, 14(4), pp. 781-801.

Greenhalgh, S (2016) The effects of 3D printing in design thinking and design education. Journal of Engineering, Design and Technology, 14(4), pp. 752-769.

Goswami, M; Singh, J and Kumar, V (2016) An enterprise based decision support system for engineering aggregate selection: A case study. Journal of Engineering, Design and Technology, 14(4), pp. 851-873.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(4), pp. 835-850.

Salcedo, R T B and Straub, A (2016) The role of the architect using integrated contracts for social housing renovation projects. Journal of Engineering, Design and Technology, 14(4), pp. 802-817.