Items with Index Term: waste management

Abadi, M and Sammuneh, M A (2020) Integrating circular economy and constructability research: An initial development of a lifecycle "circularity" assessment framework and indicators. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Abkar, M M A; Yunus, R; Harouache, A; Gamil, Y and Al-Shameri, A S A S (2025) The adoption of automation technology for the mitigation of material waste on construction sites in the Malaysian construction industry. International Journal of Construction Management, 25(5), pp. 530-541. ISSN 1562-3599

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Adabre, M A; Chan, A P C; Darko, A and Hosseini, M R (2023) Facilitating a transition to a circular economy in construction projects: Intermediate theoretical models based on the theory of planned behaviour. Building Research & Information, 51(1), pp. 85-104. ISSN 0961-3218

Adedigba, A A (2022) Towards integrated sustainable solid waste management in Nigerian cities. PhD thesis, Northumbria University, UK.

Adegun, O B (2023) Climatic disasters within a flood-prone coastal slum in Lagos: Coping capacities and adaptation prospects. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 212-228. ISSN 1759-5916

Adjei, S; Ankrah, N; Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Adjei, S D (2016) Review of waste management in the UK construction industry. PhD thesis, University of Wolverhampton, UK.

Adjei, S D; Ankrah, N A; Adukpo, S E; Ndekugri, I and Searle, D (2024) Factors influencing the extent of waste management on construction sites. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Adjei, S D; Ankrah, N A; Ndekugri, I and Searle, D (2018) Sustainable construction and demolition waste management: Comparison of corporate and project level drivers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Afkhamiaghda, M and Elwakil, E (2023) Challenges review of decision making in post-disaster construction. International Journal of Construction Management, 23(14), pp. 2409-2418. ISSN 1562-3599

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: Site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 53-65. ISSN 1759-5916

Ajisomo, T. O.; Saka, A.; Dauda, J. and Osuolale, M. (2025) Investigating circular economy barriers for construction and demolition waste in the construction industry: A Delphi and interpretive structural modelling approach. Construction Innovation, 26(4), pp. 1278-1308. ISSN 1471-4175

Akinade, O O (2017) BIM-based software for construction waste analytics using artificial intelligence hybrid models. PhD thesis, University of the West of England, Bristol, UK.

Akomea-Frimpong, I; Jin, X; Osei-Kyei, R and Kukah, A S (2023) Public-private partnerships for sustainable infrastructure development in Ghana: A systematic review and recommendations. Smart and Sustainable Built Environment, 12(2), pp. 237-257. ISSN 2046-6099

Al Hosni, I S; Amoudi, O and Callaghan, N (2020) An exploratory study on challenges of circular economy in the built environment in Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(3), pp. 104-113. ISSN 17514304

Al-Hajj, A and Hamani, K (2011) Material waste in the UAE construction industry: Main causes and minimization practices. Architectural Engineering and Design Management, 7(4), pp. 221-235. ISSN 1745-2007

Alankarage, S; Chileshe, N; Samaraweera, A; Rameezdeen, R and Edwards, D J (2022) Organisational culture in building information modelling maturity research: A bibliometric analysis. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Albert, I (2020) A lean production approach to materials management in the Nigerian construction industry. PhD thesis, Nelson Mandela University, South Africa.

Ali, A (2018) Development of a framework for sustainable construction waste management: a case study of three major Libyan cities. PhD thesis, University of Wolverhampton, UK.

Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways. PhD thesis, London South Bank University, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Allport, R J and Ward, S (2010) Operational risk: The focus for major infrastructure? Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 163(3), pp. 121-127. ISSN 17514312

Alremeithi, A A; Riaz, Z and Khan, M (2025) What constitutes citizens' recycling behavior: Insights from handling municipal solid waste in the UAE. Smart and Sustainable Built Environment, 14(4), pp. 1017-1037. ISSN 2046-6099

Alshdiefat, A S; Sharif, A A; Alharahsheh, A I; Albrka, S I; Olsson, N O E; Younes, M and Bang, S (2025) Construction and demolition waste management in Jordan: A multifaceted perspective. Construction Innovation, 25(2), pp. 290-305. ISSN 1471-4175

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

Andersson, R and Buser, M (2022) From waste to resource management? Construction and demolition waste management through the lens of institutional work. Construction Management and Economics, 40(6), pp. 477-496. ISSN 01446193

Andersson, R; Buser, M and Bosch, P (2019) Improving renovation waste management in Sweden: The role of the demolition company. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Arif, M; Bendi, D; Toma-Sabbagh, T and Sutrisna, M (2012) Construction waste management in India: An exploratory study. Construction Innovation, 12(2), pp. 133-155. ISSN 1471-4175

Arroyo, P (2014) Exploring decision-making methods for sustainable design in commercial buildings. PhD thesis, University of California, Berkeley, USA.

Asa, E; Anna, A S and Baffoe-Twum, E (2019) An investigation of mechanical behavior of concrete containing crushed waste glass. Journal of Engineering, Design and Technology, 17(6), pp. 1285-1303. ISSN 1726-0531

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Bajjou, M S and Chafi, A (2020) Empirical study of schedule delay in Moroccan construction projects. International Journal of Construction Management, 20(7), pp. 783-800. ISSN 1562-3599

Bau, Z (2022) Developing circularity of construction waste in emerging economies: an environmental Kuznets curve approach. PhD thesis, University of Hong Kong, Hong Kong.

Besklubova, S; Kravchenko, E; Kasprzhitskii, A; Lazorenko, G and Zhong, R Y (2026) Establishing a market for carbon-neutral technology in concrete waste recycling by sequestering flue co 2: An evolutionary game theory-based case study in Hong Kong. Journal of Construction Engineering and Management, 152(4): 04026017, ISSN 0733-9364

Bonyad, R; Hamzenejad, M and Khanmohammadi, M (2020) Ranking the regenerative architecture indicators for assessment of research-educational building projects in Tehran, Iran. Smart and Sustainable Built Environment, 9(1), pp. 27-37. ISSN 2046-6099

Booth, C A; Horry, R; Isaac, C; Mahamadu, A M; Manu, P; Awuah, K G B; Aboagye-Nimo, E; Georgakis, P and Prabhakaran, A (2022) Earthship buildings: opinions on their contribution towards sustainable alternative housing in the UK. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(4), pp. 192-198. ISSN 17514304

Bosch-Sijtsema, P and Buser, M (2017) Construction and demolition waste management on the building site: A literature review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Boser, R A and El-Gafy, M (2011) Accelerating waste minimization in residential construction: A source separation case study. International Journal of Construction Education and Research, 7(1), pp. 58-70. ISSN 1557-8771

Brown, C; Milke, M and Seville, E (2010) Waste management as a "lifeline"? A New Zealand case study analysis. International Journal of Disaster Resilience in the Built Environment, 1(2), pp. 192-206. ISSN 1759-5916

Bui, Diep Thi (2018) Improving the decision-making process for demolition waste management in urban redevelopment projects in Vietnam. PhD thesis, Queensland University of Technology, Australia.

Buser, M and Bosch-Sijtsema, P (2018) Attributing value to waste: The difficult road to efficient waste management for renovation projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Carollo, Federica Carla (2023) Circularity in the construction and demolition waste management chain. PhD thesis, Politecnico di Milano, Italy.

Cha, H S; Kim, J and Han, J Y (2009) Identifying and assessing influence factors on improving waste management performance for building construction projects. Journal of Construction Engineering and Management, 135(7), pp. 647-656. ISSN 0733-9364

Chammout, B and El-Adaway, I H (2025) Circular economy in construction: Decision-making factors and future research avenues. Journal of Construction Engineering and Management, 151(6): 04025059, ISSN 0733-9364

Chanyotha, S (1991) Generic cost estimates, site screening, and site design of low- and intermediate-level waste system. PhD thesis, University of Arizona, USA.

Charlson, J (2021) Emerging trends in construction law at the confluence of academia and industry. PhD thesis, University of Wolverhampton, UK.

Chen, Z; Zhou, X; Zhang, Z; Yan, H; Niu, X and Li, Y (2025) Using the decomposed theory of planned behavior and a structural equation model with partial least squares to investigate construction and demolition waste reduction behavior. Journal of Construction Engineering and Management, 151(8): 04025105, ISSN 0733-9364

Cheng, B; Huang, J; Guo, Z; Li, J and Chen, H (2023) Towards sustainable construction through better construction and demolition waste management practices: A SWOT analysis of Suzhou, China. International Journal of Construction Management, 23(15), pp. 2614-2624. ISSN 1562-3599

Chidiobi, C (2022) Development of frameworks for the management of materials procurement and construction waste for Nigerian contractors. PhD thesis, University of the West of England, Bristol, UK.

Couto, A and Couto, J (2007) Why deconstruction is not adequately considered in Portuguese building refurbishment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Craighill, A L (2002) Lifecycle assessment and evaluation of construction and demolition waste management. PhD thesis, University of East Anglia, UK.

Datta, S D; Rana, M J; Assafi, M N; Mim, N J and Ahmed, S (2023) Investigation on the generation of construction wastes in Bangladesh. International Journal of Construction Management, 23(13), pp. 2260-2269. ISSN 1562-3599

Dickinson, H and Swaffield, L (2004) Implementing a segregation-based waste management system on site: Does it reduce site waste disposal costs? Journal of Financial Management of Property and Construction, 9(2), pp. 75-90. ISSN 1366-4387

Doan, D. T.; Albsoul, H.; Shobha, A. R.; GhaffarianHoseini, A. and Ghaffarianhoseini, A. (2026) An integrated challenge-strategy framework for construction waste management in New Zealand: Behavioural and organisational challenges and strategies. Engineering, Construction and Architectural Management, pp. 1-22. ISSN 0969-9988

Dolla, T; Devkar, G and Boeing, L (2021) Procurement governance and information asymmetry in waste management of India. Built Environment Project and Asset Management, 11(1), pp. 38-51. ISSN 2044-124X

Domingo, N; Osmani, M and Price, A D F (2009) Construction waste minimisation in the UK healthcare industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Eghbali-Zarch, M; Tavakkoli-Moghaddam, R; Dehghan-Sanej, K and Kaboli, A (2022) Prioritizing the effective strategies for construction and demolition waste management using fuzzy idocriw and waspas methods. Engineering, Construction and Architectural Management, 29(3), pp. 1109-1138. ISSN 0969-9988

Emmitt, S; Gorse, C A and Jones, S R (1999) The housing site manager: Changing roles and training needs. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Esa, Mohd Reza (2018) Moving towards sustainable construction in Malaysia: A holistic model for construction and demolition (c&d) waste management. PhD thesis, University of Queensland, Australia.

Esguicero, Fabio Jose (2020) Framework applied to process modeling in municipal management of construction waste. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Eze, E C; Sofolahan, O; Ugulu, R A and Ameyaw Effah, E E (2025) Bolstering circular economy in construction through digitalisation. Construction Innovation, 25(6), pp. 1774-1796. ISSN 1471-4175

Eze, E C; Sofolahan, O; Uzoma, C N; Ameyaw, E E and Omoboye, O (2025) Impediments to building information modelling-enabled construction waste management in Nigeria. Built Environment Project and Asset Management, 15(3), pp. 500-517. ISSN 2044-124X

Farias, Izaura Pereira (2014) Proposal of a construction waste management model for the eastern zone of the city of Teresina, Piauí. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Fernández-Pacheco Sáez, J L; Rasskin-Gutman, I; Martín-Bermúdez, N and Pérez-del-Campo, A (2026) Living knowledge labs: Creating community and inclusive nature-based solutions. Buildings & Cities, 7(1), pp. 58-74. ISSN 2632-6655

Forsythe, P (2011) Drivers of housing demolition decision making and the impact on timber waste management. Construction Economics and Building, 11(1), pp. 1-14. ISSN 2204-9029

Frederiksen, N; Gottlieb, S C; de Gier, A; Johansen, P and Sørensen, A S (2022) Understanding the marketing department's role in the social and environmental ventures of construction companies. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Frempong-Jnr, E Y; Ametepey, S O and Cobbina, J E (2023) Impact of stakeholder management on efficient construction waste management. Smart and Sustainable Built Environment, 12(3), pp. 607-634. ISSN 2046-6099

Garnett, N A (2001) Changing construction performance using lean construction: An action research approach. PhD thesis, University of Reading, UK.

Gidado, K and Smilas, M (2004) Development of a model for implementation of PFI/PPP in Cyprus. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Giorgi, Serena (2020) Circular economy and regeneration of building stock: Policy improvements, strategic partnerships and life cycle decision-making tools. PhD thesis, Politecnico di Milano, Italy.

Grafström, J and Rydén, S (2026) A transition probability analysis of material flows in the European aggregates industry. Construction Management and Economics, 44(3), pp. 200-213. ISSN 0144-6193

Greer, Fiona Muriel (2021) Life-cycle environmental and economic management of airport infrastructure and operations. PhD thesis, University of California, USA.

Guerra, B C; Koo, H J; Caldas, C and Leite, F (2024) Prediction of waste diversion and identification of trends in construction and demolition waste data using data mining. International Journal of Construction Management, 24(4), pp. 374-383. ISSN 1562-3599

Guerra, Beatriz Chinelato (2021) BIM-based construction waste management and circular economy for resource recovery. PhD thesis, University of Texas at Austin, USA.

Gupta, S; Jha, K N and Vyas, G (2022) Proposing building information modeling-based theoretical framework for construction and demolition waste management: Strategies and tools. International Journal of Construction Management, 22(12), pp. 2345-2355. ISSN 1562-3599

Hao, J L; Hills, M J and Huang, T (2007) A simulation model using system dynamic method for construction and demolition waste management in Hong Kong. Construction Innovation, 7(1), pp. 7-21. ISSN 1471-4175

Hao, J L; Tam, V W Y; Yuan, H P and Wang, J Y (2011) Construction waste challenges in Hong Kong and Pearl River Delta region. International Journal of Construction Management, 11(1), pp. 37-47. ISSN 1562-3599

Hao, J L J; Tam, V W Y; Yuan, H P; Wang, J Y and Li, J R (2010) Dynamic modeling of construction and demolition waste management processes: An empirical study in Shenzhen, China. Engineering, Construction and Architectural Management, 17(5), pp. 476-492. ISSN 0969-9988

Hardie, M; Khan, S; O'Donnell, A and Miller, G (2007) The efficacy of waste management plans in Australian commercial construction refurbishment projects. Construction Economics and Building, 7(2), pp. 26-36. ISSN 2204-9029

Hasan, M R; Sagar, M S I and Ray, B C (2023) Barriers to improving construction and demolition waste management in Bangladesh. International Journal of Construction Management, 23(14), pp. 2333-2347. ISSN 1562-3599

He, R (2023) Modeling of sustainable materials management systems: Hybrid science-based, data-driven approaches. PhD thesis, Carnegie Mellon University, USA.

Hedayati, M; Iyer-Raniga, U and Crossin, E (2014) A greenhouse gas assessment of a stadium in Australia. Building Research & Information, 42(5), pp. 602-615. ISSN 0961-3218

Hiete, M; Stengel, J; Ludwig, J and Schultmann, F (2011) Matching construction and demolition waste supply to recycling demand: A regional management chain model. Building Research & Information, 39(4), pp. 333-351. ISSN 0961-3218

Hou, Shan (2014) An investigation into the development of low/zero carbon design training programmes for the purpose of disseminating the knowledge and skills of low/zero carbon design to architects in practice in England and Wales. PhD thesis, Cardiff University, UK.

Hwang, B G and Yeo, Z B (2011) Perception on benefits of construction waste management in the Singapore construction industry. Engineering, Construction and Architectural Management, 18(4), pp. 394-406. ISSN 0969-9988

Ikediashi, D and Aigbavboa, C (2019) Outsourcing as a strategy for facilities management provision in Nigerian universities. International Journal of Construction Management, 19(4), pp. 281-290. ISSN 1562-3599

Ilozor, B D (2009) Differential management of waste by construction sectors: A case study in Michigan, USA. Construction Management and Economics, 27(8), pp. 763-770. ISSN 1466433X

Inácio, M F M (1999) The building deconstruction process and the debris trail: towards a dynamic model. PhD thesis, University of Salford, UK.

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jayarathna, H S N M; Perera, B A K S; Atapattu, D and Rodrigo, N (2025) Circular economy and blockchain-integrated road map to improve construction waste management. Construction Innovation, 25(7), pp. 23-49. ISSN 1471-4175

Jayasena, N S; Mallawaarachchi, H and De Silva, L (2020) Environmental sustainability of facilities management: Analytical hierarchy process (AHP) based model for evaluation. Built Environment Project and Asset Management, 10(2), pp. 261-276. ISSN 2044-124X

Jiang, X; Zhou, H; Li, M; Lu, K; Lyu, S; Omrani, S and Skitmore, M (2024) Sustainable construction projects management in the AEC industry: Analysis and visualization. International Journal of Construction Management, 24(4), pp. 384-399. ISSN 1562-3599

Kabirifar, Kamyar (2022) Effective construction and demolition waste management assessment: A case of Australian large construction companies. PhD thesis, University of New South Wales, Australia.

Kamma, R C and Jha, K N (2026) Significant causes of construction waste in road projects. International Journal of Construction Management, 26(6), pp. 944-959. ISSN 1562-3599

Kamma, R C and Jha, K N (2022) Quantifying building construction and demolition waste using permit data. Journal of Construction Engineering and Management, 148(9): 04022091, ISSN 0733-9364

Karunasena, G; Wijeratne, W M P U; Gajanayake, A; Udawatta, N and Perera, S (2025) Stakeholder analysis of construction liquid waste management in Victoria, Australia. International Journal of Construction Management, 25(14), pp. 1691-1702. ISSN 1562-3599

Karunasena, G and Amaratunga, D (2015) Capacity gaps in post disaster construction and demolition waste management. Engineering, Construction and Architectural Management, 22(4), pp. 446-466. ISSN 0969-9988

Karunasena, G; Gajanayake, A; Wijeratne, W M P U; Milne, N; Udawatta, N; Perera, S; Crimston, A and Aliviano, P (2024) Liquid waste management in the construction sector: A systematic literature review. International Journal of Construction Management, 24(1), pp. 86-96. ISSN 1562-3599

Karunasena, G I (2012) Capacity building for post disaster waste management: Construction and demolition waste. PhD thesis, University of Salford, UK.

Khan, N A; Ullah Khan, S; Ahmed, S; Farooqi, I H; Hussain, A; Vambol, S and Vambol, V (2020) Smart ways of hospital wastewater management, regulatory standards and conventional treatment techniques: A short review. Smart and Sustainable Built Environment, 9(4), pp. 727-736. ISSN 2046-6099

Khural, R A; Ertz, M and Cerchione, R (2024) Moving toward sustainability and circularity in hill road construction: A study of barriers, practices and performance. Engineering, Construction and Architectural Management, 31(4), pp. 1608-1641. ISSN 0969-9988

Kim, S Y; Nguyen, M V and Luu, V T (2020) A performance evaluation framework for construction and demolition waste management: Stakeholder perspectives. Engineering, Construction and Architectural Management, 27(10), pp. 3189-3213. ISSN 0969-9988

Kleemann, F; Lederer, J; Aschenbrenner, P; Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(1), pp. 51-62. ISSN 0961-3218

Koc, K; Durdyev, S; Tleuken, A; Ekmekcioglu, O; Mbachu, J and Karaca, F (2024) Critical success factors for construction industry transition to circular economy: Developing countries' perspectives. Engineering, Construction and Architectural Management, 31(12), pp. 4955-4974. ISSN 0969-9988

Krook, J (2006) Concentrate or dilute contaminants? Strategies for Swedish wood waste. PhD thesis, Linköping University, Sweden.

Kuittinen, M and Häkkinen, T (2020) Reduced carbon footprints of buildings: New Finnish standards and assessments. Buildings & Cities, 1(1), pp. 182-197. ISSN 2632-6655

Kunieda, Y; Codinhoto, R and Emmitt, S (2019) Increasing the efficiency and efficacy of demolition through computerised 4D simulation. Engineering, Construction and Architectural Management, 26(10), pp. 2186-2205. ISSN 0969-9988

Kwaghsende, F K (2020) Assessment of social networks in informal solid waste recycling activities and sustainable solid waste management, North Central Nigeria. African Journal of Built Environment Research, 4(1), pp. 21-35. ISSN 2414-0236

Kwasafo, O K; Adinyira, E and Agyekum, K (2024) Impact of green construction procurement practices on the success of circular economy in Ghana. Built Environment Project and Asset Management, 14(5), pp. 765-781. ISSN 2044-124X

Kwawu, W and Elmualim, A (2011) Sustainability in facilities management: A review of drivers and policy issues. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Lal, H (2013) Nuclear decommissioning contracts: The legal and commercial issues. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(2), pp. 94-102. ISSN 17514304

Languell, J L (2001) Development of a prototype assessment tool to evaluate the potential to successfully implement deconstruction as a regional waste reduction strategy. PhD thesis, University of Florida, USA.

Lara, Beatriz Leão Evangelista de (2024) Construction and demolition waste prevention analysis of benefits in the context of social housing. PhD thesis, Universidade Estadual de Campinas, Brazil.

Leshinsky, R (2016) Touching on transparency in city local law making: Experiences from waking up each day in city of Melbourne, Australia. International Journal of Law in the Built Environment, 8(3), pp. 194-209. ISSN 1756-1450

Li, Guokai (2024) A research on construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Li, J; Zuo, J; Jiang, W; Zhong, X; Li, J and Pan, Y (2020) Policy instrument choice for construction and demolition waste management: The case study of Shenzhen, China. Engineering, Construction and Architectural Management, 27(6), pp. 1283-1297. ISSN 0969-9988

Li, K; Salleh, H B; Wang, R and Yang, Y (2025) How do different policy instruments influence circular economy implementation in the construction sector? Building Research & Information, 53(3), pp. 359-374. ISSN 0961-3218

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Li, M and Yang, J (2014) Analysis of interrelationships between critical waste factors in office building retrofit projects using interpretive structural modelling. International Journal of Construction Management, 14(1), pp. 15-27. ISSN 1562-3599

Li, Mei (2012) A waste management system for small and medium enterprises engaged in office building retrofit projects. PhD thesis, Queensland University of Technology, Australia.

Li, Y (2013) Developing a sustainable construction waste estimation and management system. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Li Hao, J; Hill, M J and Yin Shen, L (2008) Managing construction waste on-site through system dynamics modelling: The case of Hong Kong. Engineering, Construction and Architectural Management, 15(2), pp. 103-113. ISSN 0969-9988

Lima, Rosimeire Midori Suzuki Rosa (2012) Evaluation system of integrated construction and demolition waste management at the municipal level. PhD thesis, Universidade de São Paulo, Brazil.

Ling, F Y Y and Nguyen, D S A (2013) Strategies for construction waste management in Ho Chi Minh City, Vietnam. Built Environment Project and Asset Management, 3(1), pp. 141-156. ISSN 2044-124X

Lingard, H; Graham, P and Smithers, G (1997) Waste management in the Australian construction industry: A human factors approach. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Lingard, H; Graham, P and Smithers, G (2000) Employee perceptions of the solid waste management system operating in a large Australian contracting organization: Implications for company policy implementation. Construction Management and Economics, 18(4), pp. 383-393. ISSN 01446193

Lippiatt, B C (1999) Selecting cost-effective green building products: Bees approach. Journal of Construction Engineering and Management, 125(6), pp. 448-455. ISSN 0733-9364

Liu, Z (2024) Bridging circularity and inclusion: Rethinking municipal solid waste infrastructure for sustainable urban transitions. PhD thesis, Delft University of Technology, Netherlands.

Lombardi Filho, Pedro (2022) Management of small volumes of asbestos-cement materials in Brazil: From use to waste. PhD thesis, Universidade de São Paulo, Brazil.

Lovrenčić Butković, L; Mihić, M and Sigmund, Z (2023) Assessment methods for evaluating circular economy projects in construction: A review of available tools. International Journal of Construction Management, 23(5), pp. 877-886. ISSN 1562-3599

Lu, M; Lau, S C and Poon, C S (2009) Simulation approach to evaluating cost efficiency of selective demolition practices: Case of Hong Kong's Kai Tak Airport demolition. Journal of Construction Engineering and Management, 135(6), pp. 448-457. ISSN 0733-9364

Lu, M; Poon, C S and Wong, L C (2006) Application framework for mapping and simulation of waste handling processes in construction. Journal of Construction Engineering and Management, 132(11), pp. 1212-1221. ISSN 0733-9364

Lu, W; Webster, C; Peng, Y; Chen, X and Zhang, X (2017) Estimating and calibrating the amount of building-related construction and demolition waste in urban China. International Journal of Construction Management, 17(1), pp. 13-24. ISSN 1562-3599

Machete, S M (1997) Waste management in construction sites of emerging contractors in South Africa. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Marinelli, M; Dolan, M; Spillane, J and Konanahalli, A (2014) Material waste in the Northern Ireland construction industry: On-site management causes and methods of prevention. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Marques Neto, José da Costa (2009) Study on municipal management of construction and demolition wastes in the turvo grande watershed (urghi-15). PhD thesis, Universidade de São Paulo, Brazil.

Marrero, M and Ramirez-De-Arellano, A (2010) The building cost system in andalusia: Application to construction and demolition waste management. Construction Management and Economics, 28(5), pp. 495-507. ISSN 1466433X

Mater, Y; Kamel, M; Karam, A and Bakhoum, E (2023) Ann-python prediction model for the compressive strength of green concrete. Construction Innovation, 23(2), pp. 340-359. ISSN 1471-4175

Mbadugha, L C; Ozumba, A O U and Shakantu, W (2021) Prospects for integrated design process (IDP) in implementing construction waste prevention (CWP) practices. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

McDonald, B and Smithers, M (1998) Implementing a waste management plan during the construction phase of a project: A case study. Construction Management and Economics, 16(1), pp. 71-78. ISSN 01446193

Meglin, R (2022) Economic and environmental assessment of a regional construction and building materials industry in Switzerland: An applied combination of material-flow analysis, life-cycle assessment and input-output analysis. DSc thesis, ETH Zürich, Switzerland.

Mhlanga, J; Haupt, T C and Loggia, C (2024) Shaping circular economy in the built environment in Africa. A bibliometric analysis. Journal of Engineering, Design and Technology, 22(2), pp. 613-642. ISSN 1726-0531

Mihocic, E; Gharehbaghi, K; Hilletofth, P; Tee, K F and Myers, M (2025) Augmenting the cities' and metropolitan regional demands for mega rail infrastructure: The application of SWOT and factor analysis. Smart and Sustainable Built Environment, 14(2), pp. 377-406. ISSN 2046-6099

Milani, B (2005) Building materials in a green economy: Community-based strategies for dematerialization. PhD thesis, University of Toronto, Canada.

Min, V; Panuwatwanich, K and Matsumoto, K (2025) Evaluating key attributes for enhancing contractors' performance in construction waste management: A multi-criteria decision analysis using the best worst method. International Journal of Construction Management, 25(16), pp. 1968-1981. ISSN 1562-3599

Mirshekarlou, B R (2018) An investigation of material waste management in prefabricated construction industry and developing an integrated waste management tool. PhD thesis, Middle East Technical University, Turkey.

Moghayedi, A. and Awuzie, B. (2026) Unlocking sustainability futures: A framework for digital product passports and material banks in a circular built environment. Construction Innovation, 26(9), pp. 135-166. ISSN 1471-4175

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Naji, K K; Gunduz, M and Hamaidi, M F (2022) Major factors affecting construction waste management in infrastructure projects using structural equation model. Journal of Construction Engineering and Management, 148(10): 04022101, ISSN 0733-9364

Narayana Naidelage, Chamari Pushpamali (2021) The role of reverse logistics on supply chain performance. PhD thesis, Queensland University of Technology, Australia.

Newaz, M T; Davis, P; Sher, W and Simon, L (2022) Factors affecting construction waste management streams in Australia. International Journal of Construction Management, 22(13), pp. 2625-2633. ISSN 1562-3599

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Nikmehr, B; Hosseini, M R; Rameezdeen, R; Chileshe, N; Ghoddousi, P and Arashpour, M (2017) An integrated model for factors affecting construction and demolition waste management in Iran. Engineering, Construction and Architectural Management, 24(6), pp. 1246-1268. ISSN 0969-9988

Ogunmakinde, O E (2019) Developing a circular-economy-based construction waste minimisation framework for Nigeria. PhD thesis, University of Newcastle, Australia.

Oladiran, O J (2009) Innovative waste management through the use of waste management plans on construction projects in Nigeria. Architectural Engineering and Design Management, 5(3), pp. 165-176. ISSN 1745-2007

Oladiran, O J; Bayewun, A A and Aderogba, A M (2021) Awareness and usage of environmental waste management practices of contractors on construction sites. Journal of Construction Business and Management, 5(1), pp. 17-27. ISSN 2521-0165

Oladiran, O J; Ogunsanmi, O E and Dada, M O (2019) Frameworks for material waste minimization on Nigerian building projects. Journal of Construction Business and Management, 3(1), pp. 45-61. ISSN 2521-0165

Olaniyi, O O (2017) Development of a facilities management framework for sustainable building practices in Nigeria. PhD thesis, University of Central Lancashire, UK.

Ollár, A (2024) Spatial design for circularity in residential buildings: Exploring the case of the kitchen. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Onubi, H O; Yusof, N and Hassan, A S (2020) Effects of green construction on project's economic performance. Journal of Financial Management of Property and Construction, 25(3), pp. 331-346. ISSN 1366-4387

Onubi, H O; Yusof, N and Hassan, A S (2020) Adopting green construction practices: Health and safety implications. Journal of Engineering, Design and Technology, 18(3), pp. 635-652. ISSN 1726-0531

Onubi, H O; Yusof, N A and Hassan, A S (2019) Green site practices and environmental performance: How project complexity moderates the relationship. Construction Economics and Building, 19(1), pp. 75-95. ISSN 2204-9029

Osaily, Y (2021) Guidance for advancing demolition project management in the UK. PhD thesis, University of Bath, UK.

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Osmani, M (2015) Integration of waste minimisation strategies into the design process of buildings. PhD thesis, Loughborough University, UK.

Othman, A A E and Saad, A S M (2026) A strategy for reducing construction waste generated during the design process in architectural design firms in Egypt. Construction Innovation, 26(2), pp. 395-420. ISSN 1471-4175

Owusu-Manu, D G; Amo-Asamoah, E; Ghansah, F A and Asumadu, G (2022) An analysis of the economic viability of waste-to-energy generation in the kumasi metropolis of Ghana. Journal of Financial Management of Property and Construction, 27(1), pp. 1-15. ISSN 1366-4387

Owusu-Manu, D G; Babon-Ayeng, P; Kissi, E; Edwards, D J; Okyere-Antwi, D and Elgohary, H (2023) Green construction and environmental performance: An assessment framework. Smart and Sustainable Built Environment, 12(3), pp. 565-583. ISSN 2046-6099

Oyenuga, A (2016) Economic and environmental impact assessment of construction and demolition waste recycling and reuse using LCA and MCDA management tools. PhD thesis, London South Bank University, UK.

Park, J and Tucker, R (2017) Overcoming barriers to the reuse of construction waste material in Australia: A review of the literature. International Journal of Construction Management, 17(3), pp. 228-237. ISSN 1562-3599

Pheng, L S and Hui, M S (1999) The application of JIT philosophy to construction: A case study in site layout. Construction Management and Economics, 17(5), pp. 657-668. ISSN 01446193

Pitt, M and Smith, A (2003) An assessment of waste management efficiency at baa airports. Construction Management and Economics, 21(4), pp. 421-431. ISSN 01446193

Polesie, P M A (2012) Reducing the use of resources in medium-sized Swedish construction enterprises: Production managers' views. Construction Management and Economics, 30(3), pp. 193-202. ISSN 01446193

Poon, C S; Yu, A T W; Wong, A and Yip, R (2013) Quantifying the impact of construction waste charging scheme on construction waste management in Hong Kong. Journal of Construction Engineering and Management, 139(5), pp. 466-479. ISSN 0733-9364

Poon, C S; Yu, A T W; Wong, S W and Cheung, E (2004) Management of construction waste in public housing projects in Hong Kong. Construction Management and Economics, 22(7), pp. 675-689. ISSN 01446193

Porwal, A and Hewage, K N (2012) Building information modeling-based analysis to minimize waste rate of structural reinforcement. Journal of Construction Engineering and Management, 138(8), pp. 943-954. ISSN 0733-9364

Price, T (2010) Site waste management plans, the designer and the CDM principal contractor. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Prieto, A J and Alarcón, L F (2023) Using fuzzy inference systems for lean management strategies in construction project delivery. Journal of Construction Engineering and Management, 149(9): 04023083, ISSN 0733-9364

Radvan, M (2019) Municipal charges on communal waste: Do they compete with the immovable property tax? Journal of Financial Management of Property and Construction, 24(2), pp. 148-165. ISSN 1366-4387

Ramos, M A P (2023) Determining factors and strategies to promote construction and demolition waste management on a local scale. PhD thesis, Universidade NOVA de Lisboa, Portugal.

Rasanjali, W A; Mendis, A P K D; Perera, B A K S and Disaratna, V (2024) Implementing enterprise resource planning for lean waste minimisation: Challenges and proposed strategies. Smart and Sustainable Built Environment, 13(2), pp. 330-353. ISSN 2046-6099

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Exploring the barriers for implementing waste trading practices in the construction industry in Australia. Built Environment Project and Asset Management, 11(4), pp. 559-576. ISSN 2044-124X

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Rayhan, D S A and Bhuiyan, I U (2025) A framework for evaluation of construction and demolition waste management alternatives using MCDA techniques in the context of Dhaka City. International Journal of Construction Management, 25(4), pp. 481-493. ISSN 1562-3599

Rodrigo, N; Omrany, H; Chang, R and Zuo, J (2024) Leveraging digital technologies for circular economy in construction industry: A way forward. Smart and Sustainable Built Environment, 13(1), pp. 85-116. ISSN 2046-6099

Rondinel-Oviedo, D R (2023) Construction and demolition waste management in developing countries: A diagnosis from 265 construction sites in the lima metropolitan area. International Journal of Construction Management, 23(2), pp. 371-382. ISSN 1562-3599

Rosado, Lais Peixoto (2019) Life cycle assessment of construction and demolition waste management in a Brazilian watershed. PhD thesis, Universidade Estadual de Campinas, Brazil.

Rose, Colin (2019) Systems for reuse, repurposing and upcycling of existing building components. PhD thesis, University College London, UK.

Rosli, M F; Muhammad Tamyez, P F and Zahari, A R (2023) The effects of suitability and acceptability of lean principles in the flow of waste management on construction project performance. International Journal of Construction Management, 23(1), pp. 114-125. ISSN 1562-3599

Rossetto, Daniel Marc (2024) Incentivising the recovery and utilisation of construction and demolition waste. PhD thesis, University of Adelaide, Australia.

Rosso, S (2007) Environmental life-cycle of domestic kitchen refurbishment. PhD thesis, University of Brighton, UK.

Sachchithananthan, M and Thayaparan, M (2025) A framework to select suitable sustainable materials for high-rise buildings in Sri Lanka. International Journal of Construction Management, 25(9), pp. 1072-1086. ISSN 1562-3599

Sadiq, M and Khalfan, M M A (2025) Transitioning to a circular economy in the construction demolition industry: A bibliometric analysis. Built Environment Project and Asset Management, 15(3), pp. 518-534. ISSN 2044-124X

Saidu, I; Shakantu, W; Adamu, A and Anugwo, I (2017) A bespoke approach for relating material waste to cost overrun in the construction indsutry. Journal of Construction Business and Management, 1(1), pp. 39-52. ISSN 2521-0165

Sandaruwan, I P T; Bihara Janardana, J A and Manoharan, K (2024) Job attributes of key Sri Lankan construction professionals in addressing the challenges associated with climate change. International Journal of Disaster Resilience in the Built Environment, 15(3), pp. 370-394. ISSN 1759-5916

Santos, Raphael Lucio Reis dos (2023) Development of a prediction model for generation of construction and demolition waste for proposing a management network in medium-sized municipalities. PhD thesis, Centro Federal de Educação Tecnológica de Minas Gerais, Brazil.

Saradara, S M; Lara, J C F; Swarnakar, V; Rauf, A; Qureshi, R; Fadel, M E and Khalfan, M M A (2024) Construction and demolition waste management in the United Arab Emirates through the 3R principle. Engineering, Construction and Architectural Management, 31(13), pp. 430-454. ISSN 0969-9988

Schultmann, F and Sunke, N (2007) Energy-oriented deconstruction and recovery planning. Building Research & Information, 35(6), pp. 602-615. ISSN 0961-3218

Seethapathy, S and Henderson, J H (2017) Management of construction waste in nuclear and thermal power plant projects in India. Journal of Construction in Developing Countries, 22(S1), pp. 19-46. ISSN 1823-6499

Selman, A D; Guðjónsdóttir, S and Gade, A N (2021) Is the Danish construction sector ready for sustainable and circular construction sites? In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Selvam, G.; Kamalanandhini, M.; Velpandian, M.; Hariharan, R.; Mohanakrishna, S. and Thirumurugan, V. (2026) Integrated statutory waste management framework for the sustainable built environment. Engineering, Construction and Architectural Management, 33(5), pp. 4078-4097. ISSN 0969-9988

Seneviratne, K; Rameezdeen, R and Amaratunga, D (2015) Contractor capacity and waste generation: An empirical investigation. Journal of Construction in Developing Countries, 20(2), pp. 25-36. ISSN 1823-6499

Seydel, A; Wilson, O D and Skitmore, R M (2002) Financial evaluation of waste management methods: a case study. Journal of Construction Research, 3(1), pp. 167-179. ISSN 1609-9451

Sezer, A (2012) Environmental assessment tools and efficiency in housing and office refurbishment. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Sezer, A A (2013) Indicators of environmental and productivity performance for building refurbishment projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Sezer, A A (2016) Construction performance measurement: Site managers in refurbishment projects. PhD thesis, Chalmers University of Technology, Sweden.

Sezer, A A and Bosch-Sijtsema, P (2022) Actor-to-actor tensions influencing waste management in building refurbishment projects: A service ecosystem perspective. International Journal of Construction Management, 22(9), pp. 1690-1699. ISSN 1562-3599

Shahid, M. U.; Thaheem, M. J. and Arshad, H. (2023) Quantification and benchmarking of construction waste and its impact on cost: A case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Shahid, M U; Thaheem, M J and Arshad, H (2023) Quantification and benchmarking of construction waste and its impact on cost: a case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Shaw, J; Osaily, Y and McCann, S (2024) Demolition evolution: Embracing challenges and changes in the UK demolition industry. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Shen, L Y; Tam, V W Y; Tam, C M and Drew, D (2004) Mapping approach for examining waste management on construction sites. Journal of Construction Engineering and Management, 130(4), pp. 472-481. ISSN 0733-9364

Shooshtarian, S; Caldera, S; Maqsood, T; Ryley, T and Khalfan, M (2022) An investigation into challenges and opportunities in the Australian construction and demolition waste management system. Engineering, Construction and Architectural Management, 29(10), pp. 4313-4330. ISSN 0969-9988

Shooshtarian, S; Hosseini, M R; Kocaturk, T; Arnel, T and T. Garofano, N (2023) Circular economy in the Australian AEC industry: Investigation of barriers and enablers. Building Research & Information, 51(1), pp. 56-68. ISSN 0961-3218

Shooshtarian, S; Maqsood, T; Wong, P S P; Caldera, S; Ryley, T; Zaman, A and Cáceres Ruiz, A M (2024) Circular economy in action: The application of products with recycled content in construction projects: a multiple case study approach. Smart and Sustainable Built Environment, 13(2), pp. 370-394. ISSN 2046-6099

Shukra, Z A and Zhou, Y (2021) Holistic green BIM: A scientometrics and mixed review. Engineering, Construction and Architectural Management, 28(9), pp. 2273-2299. ISSN 0969-9988

Small-Warner, K (2022) Adopting sustainable business models in small island developing states (SIDS): buildings and construction sector. PhD thesis, De Montfort University, UK.

Stenis, J (2005) Industrial management models with emphasis on construction waste. PhD thesis, Lund University, Sweden.

Sudarsan, J S; Rajprasad, J; V. Gedam, V; A. Abhyankar, A; S. Sriram, N and Dharaskar, S (2026) Resilient and sustainable construction industry: Leveraging crisis and lean management. International Journal of Construction Management, 26(2), pp. 219-233. ISSN 1562-3599

Susilowati, F; Abadi, M and Wang, Y (2024) Developing a conceptual framework for 'designing out waste' in construction circular economy: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Tam, V W Y and Hao, J J L (2014) Prefabrication as a mean of minimizing construction waste on site. International Journal of Construction Management, 14(2), pp. 113-121. ISSN 1562-3599

Tam, V W Y; Shen, L Y; Fung, I W H and Wang, J Y (2007) Controlling construction waste by implementing governmental ordinances in Hong Kong. Construction Innovation, 7(2), pp. 149-166. ISSN 1471-4175

Tangtinthai, N (2016) Extraction, use and disposal of construction materials in Great Britain and Thailand. PhD thesis, University of Newcastle upon Tyne, UK.

Teo, M M M and Loosemore, M (2001) A theory of waste behaviour in the construction industry. Construction Management and Economics, 19(7), pp. 741-751. ISSN 01446193

Teriö, O; Sorri, J; Kähkönen, K and Hämäläinen, J (2014) Environmental index for Finnish construction sites. Construction Innovation, 14(2), pp. 245-262. ISSN 1471-4175

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Tikam, H. and Kothari, C. (2026) Policy instruments for effective construction and demolition waste management. Engineering, Construction and Architectural Management, pp. 1-34. ISSN 0969-9988

Tinker, A and Burt, R (2004) "Greening" the construction curriculum. International Journal of Construction Education and Research, 1(1), pp. 26-33. ISSN 1557-8771

Tirado Fabian, D R (2022) Contribution to the development of a model for the analysis of stocks and flows of waste materials from buildings at a territorial scale. DSc thesis, ETH Zürich, Switzerland.

Tunji-Olayeni, P; Kajimo-Shakantu, K and Osunrayi, E (2020) Practitioners' experiences with the drivers and practices for implementing sustainable construction in Nigeria: A qualitative assessment. Smart and Sustainable Built Environment, 9(4), pp. 443-465. ISSN 2046-6099

Udawatta, N; Zuo, J; Chiveralls, K and Zillante, G (2015) Attitudinal and behavioural approaches to improving waste management on construction projects in Australia: Benefits and limitations. International Journal of Construction Management, 15(2), pp. 137-147. ISSN 1562-3599

Udawatta, N; Zuo, J; Chiveralls, K and Zillante, G (2021) From green buildings to living buildings? Rating schemes and waste management practices in Australian educational buildings. Engineering, Construction and Architectural Management, 28(4), pp. 1278-1294. ISSN 0969-9988

Ullah, F; Olatunji, O and Qayyum, S (2026) A scoping review of green internet of things in construction and smart cities: Current applications, adoption strategies and future directions. Smart and Sustainable Built Environment, 15(1), pp. 294-318. ISSN 2046-6099

Urme, S A; Radia, M A; Alam, R; Chowdhury, M U; Hasan, S; Ahmed, S; Sara, H H; Islam, M S; Jerin, D T; Hema, P S; Rahman, M; Islam, A K M M; Hasan, M T and Quayyum, Z (2021) Dhaka landfill waste practices: Addressing urban pollution and health hazards. Buildings & Cities, 2(1), pp. 700-716. ISSN 2632-6655

Valizadeh, M.; Azizi, M.; Hosseini, M. R. and Mahoor, P. (2026) A hybrid analysis of reverse logistics barriers in Iranian construction. Smart and Sustainable Built Environment, 15(3), pp. 1225-1254. ISSN 2046-6099

Van Den Berg, M; Hulsbeek, L and Voordijk, H (2023) Decision-support for selecting demolition waste management strategies. Buildings & Cities, 4(1), pp. 883-901. ISSN 2632-6655

Van Timmeren, A and Sidler, D (2007) The sustainable implant: Decentralised sanitation and energy reuse (Desaer) in the built environment. Construction Innovation, 7(1), pp. 22-37. ISSN 1471-4175

Vaz-Serra, P and Mitcheltree, H (2021) Understanding the key master of construction project management graduate competencies required to meet industry needs in Australia. International Journal of Construction Education and Research, 17(3), pp. 222-241. ISSN 1557-8771

Victar, H C and Waidyasekara, K G A S (2026) Circular economy strategies for minimising construction waste in Sri Lanka: Focus on the preconstruction stage. Construction Innovation, 26(3), pp. 814-842. ISSN 1471-4175

Victar, H C; Perera, B A K S; Palihakkara, A D and Dewagod, K G (2024) Roles and competencies of quantity surveyors in achieving a circular built environment: An investigation according to 3r principles. Smart and Sustainable Built Environment, 13(4), pp. 1015-1040. ISSN 2046-6099

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Vijayenthiran, V.; Perera, B. A. K. S. and Kavirathna, A. S. (2026) Convergence of 3D printing with circular economy to improve the construction sustainability. Smart and Sustainable Built Environment, 15(3), pp. 1026-1046. ISSN 2046-6099

Volpintesta, Francesco (2024) New eco-sustainable construction materials derived from industrial wastes. PhD thesis, Università degli Studi di Camerino, Italy.

Wan, S K M and Kumaraswamy, M M (2009) Industrial management approaches for improving material control in building services works. Engineering, Construction and Architectural Management, 16(3), pp. 208-223. ISSN 0969-9988

Wan, S K M; Kumaraswamy, M M and Liu, D T C (2009) Contributors to construction debris from electrical and mechanical work in Hong Kong infrastructure projects. Journal of Construction Engineering and Management, 135(7), pp. 637-646. ISSN 0733-9364

Wang, J Y; Kang, X P and Tam, V W Y (2008) An investigation of construction wastes: An empirical study in Shenzhen. Journal of Engineering, Design and Technology, 6(3), pp. 227-236. ISSN 1726-0531

Wang, Z; Xie, W and Liu, J (2022) Regional differences and driving factors of construction and demolition waste generation in China. Engineering, Construction and Architectural Management, 29(6), pp. 2300-2327. ISSN 0969-9988

Wang, Ze (2025) Advancing circular construction in sydney: Integrating system dynamics, evolutionary game theory, and robust optimization for construction and demolition waste management. PhD thesis, University of Sydney, Australia.

Wilson, B; An, M and Evdorides, H (2006) The effects of building and planning regulations on construction and demolition waste management. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Wimalasena, B A D S (2011) A planning tool for construction waste management. PhD thesis, University of Calgary, Canada.

Wong, E O W and Yip, R C P (2004) Promoting sustainable construction waste management in Hong Kong. Construction Management and Economics, 22(6), pp. 563-566. ISSN 01446193

Wu, Huanyu (2020) Impacts of cross-regional mobility of construction and demolition waste in Australia. PhD thesis, University of Adelaide, Australia.

Yadav, H; Soni, U and Kumar, G (2023) Analysing challenges to smart waste management for a sustainable circular economy in developing countries: A fuzzy DEMATEL study. Smart and Sustainable Built Environment, 12(2), pp. 361-384. ISSN 2046-6099

Yahya, K and Boussabaine, H (2010) Quantifying environmental impacts and eco-costs from brick waste. Architectural Engineering and Design Management, 6(3), pp. 189-206. ISSN 1745-2007

Yi, Yanqing (2025) New model for integration life cycle assessment and system dynamics to support the process of construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Yu, A T W; Mok, K S H and Wong, I (2023) Minimisation and management strategies for refurbishment and renovation waste in Hong Kong. Engineering, Construction and Architectural Management, 30(2), pp. 869-888. ISSN 0969-9988

Yuan, H (2011) A dynamic model for assessing the effectiveness of construction and demolition waste management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zamani, S H; Rahman, R A; Yusof, L M and Naganathan, H (2025) Well building for developing countries: Critical design criteria for residential buildings in Malaysia. Journal of Engineering, Design and Technology, 23(5), pp. 1519-1540. ISSN 1726-0531

Zhao, X and Pan, W (2022) The characteristics and evolution of business model for green buildings: A bibliometric approach. Engineering, Construction and Architectural Management, 29(10), pp. 4241-4266. ISSN 0969-9988

Zighan, S and Abualqumboz, M (2021) A project life-cycle readiness approach to manage construction waste in Jordan. Construction Economics and Building, 21(3), pp. 58-79. ISSN 2204-9029

van der Kuyp, D J (2018) Strategies construction managerial leaders use to counteract material cost overruns. PhD thesis, Walden University, USA.

Šelih, J (2005) Improvement of construction and demolition (C&D) waste management on construction sites. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.