Items with Index Term: tensile strength

Ahmed, H I (2023) Mechanical behavior, microstructure, and chloride-penetration resistance of glass waste nanopowder magnetic concrete. Journal of Construction Engineering and Management, 149(1): 04022152, ISSN 0733-9364

Ahmed, H I (2023) Behavior of magnetic self-compacting polypropylene fiber-reinforced concrete. Journal of Construction Engineering and Management, 149(3): 04022179, ISSN 0733-9364

Amran, M (2025) Innovative technology for converting automobile tire waste bead wires into recycled steel fibers for sustainable concrete composites: Insights for the Al-Kharj Governorate construction industry. International Journal of Building Pathology and Adaptation, 43(4), pp. 665-692. ISSN 2398-4708

Asa, E; Anna, A S and Baffoe-Twum, E (2019) An investigation of mechanical behavior of concrete containing crushed waste glass. Journal of Engineering, Design and Technology, 17(6), pp. 1285-1303. ISSN 1726-0531

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Barham, W; Al-Maabreh, A and Latayfeh, O (2023) Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature. International Journal of Building Pathology and Adaptation, 41(5), pp. 1086-1098. ISSN 23984708

Daniel, C and Neufville, E K (2025) An autogluon-enabled robust machine learning model for concrete tensile and compressive strength forecast. International Journal of Construction Management, 25(13), pp. 1636-1647. ISSN 1562-3599

Edike, U E; Adenuga, O A; Idusuyi, D U and Oke, A A (2025) Effect of curing media on the performance of clay bricks partially stabilised with pulverised cow bone ash. Journal of Engineering, Design and Technology, 23(2), pp. 442-457. ISSN 1726-0531

Ghanbarpour, S; Mazaheripour, H; Mirmoradi, S H and Barari, A (2010) The effect of type and volume fraction (vf) of steel fiber on the mechanical properties of self-compacting concrete. Journal of Engineering, Design and Technology, 8(3), pp. 247-256. ISSN 1726-0531

Ghannoum, M; Assaad, J; Daaboul, M and El-Mir, A (2025) Deterministic and stochastic finite element modeling of reinforced concrete beams without stirrups containing plastic wastes. International Journal of Building Pathology and Adaptation, 43(4), pp. 614-632. ISSN 2398-4708

Hu, W; Shu, X; Jia, X and Huang, B (2017) Recommendations on intelligent compaction parameters for asphalt resurfacing quality evaluation. Journal of Construction Engineering and Management, 143(9): 04017065, ISSN 0733-9364

Hussein, K; Akbari, H; Noorossana, R and Yadegari, R (2025) A multi-response optimization approach to mechanical properties improvement of dissimilar resistance spot welding joints. Journal of Engineering, Design and Technology, 23(2), pp. 423-441. ISSN 1726-0531

Ibrahim, A G; Garba, M M; Okoli, O G; Zubairu, I K; Dahiru, D and Usman, J (2020) Properties of reactive powder concrete produced with unrefined metakaolin and gear inner wire. African Journal of Built Environment Research, 4(1), pp. 81-95. ISSN 2414-0236

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Kashyap, V S; Sancheti, G and Yadav, J S (2023) Mechanical and microstructural behavior of concrete containing marble and nano silica. Journal of Engineering, Design and Technology, 21(5), pp. 1588-1603. ISSN 1726-0531

Khatib, J; Jahami, A; El Kordi, A; Sonebi, M; Malek, Z; Elchamaa, R and Dakkour, S (2023) Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology, 21(3), pp. 862-882. ISSN 1726-0531

Li, M (2024) Dfma-oriented rebar design optimization for reinforced concrete structures using graph neural network. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Liu, L and Wan, S (2024) Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers. International Journal of Building Pathology and Adaptation, 42(6), pp. 1126-1146. ISSN 2398-4708

Muhammad, A; Usman, N and Gambo, N (2022) Effect of binary blended pozzolanic materials on properties of self-compacting concrete. International Journal of Construction Management, 22(7), pp. 1323-1332. ISSN 1562-3599

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Nunes, M C M (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham, UK.

Patil, S V; Balakrishna Rao, K and Nayak, G (2023) Prediction of recycled coarse aggregate concrete mechanical properties using multiple linear regression and artificial neural network. Journal of Engineering, Design and Technology, 21(6), pp. 1690-1709. ISSN 1726-0531

Reda, R; Saad, M; Ahmed, M Z and Abd-Elkader, H (2018) Monitoring joint quality: Taguchi approach and structure investigation. Journal of Engineering, Design and Technology, 16(2), pp. 211-232. ISSN 1726-0531

Rethinam, A; Shivakumar, V D; Harish, L; Abhishek, M B; Ramana, G V; Madhusudana, R; Sah, R and Manjini, S (2015) Grain refinement of c-mn steel through thermo-mechanical processing. Journal of Engineering, Design and Technology, 13(2), pp. 282-297.

Sinclair, C. and Alwan, Z. (2026) Adaptability of concrete blocks, reinforced with recycled plastics: Circular construction approach from the UK. International Journal of Building Pathology and Adaptation, 44(4), pp. 1030-1045. ISSN 2398-4708

Somani, N; Singh, N and Gupta, N K (2021) Joining and characterization of ss-430 using microwave hybrid heating technique. Journal of Engineering, Design and Technology, 19(6), pp. 1344-1357. ISSN 1726-0531

Somani, N; Tyagi, Y K and Gupta, N K (2024) An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of cu-sic composites. Journal of Engineering, Design and Technology, 22(1), pp. 77-88. ISSN 1726-0531

Stewart, J; Minchin, R E; Jaselskis, E J; Dayal, V and Smith, G (2004) Potential construction applications for thermoset composite scrap material. Journal of Construction Engineering and Management, 130(2), pp. 199-205. ISSN 0733-9364

Subchan, B R; Tayeh, B A; Widayanto, E and Wiswamitra, K A (2024) Bamboo's evolution as a sustainable material: A comprehensive exploration and practical integration as a structural element in concrete, bridge frameworks, and architectural perspectives. Architectural Engineering and Design Management, 20(6), pp. 1566-1588. ISSN 1745-2007

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Uhlemann, J; Stranghöner, N; Motevalli, M and Balzani, D (2020) Architectural woven polyester fabrics: Examination of possible classification of stiffness values in correlation with strength values. Architectural Engineering and Design Management, 17(3-4), pp. 1-18. ISSN 1745-2007

Valizadeh Kiamahalleh, M.; Gholampour, A.; Tang, Y. and Ngo, T. D. (2026) Delithiated β-spodumene as a partial cement replacement in waste-based concrete with recycled aggregates and sugarcane fiber. International Journal of Construction Management, 26(10), pp. 2245-2257. ISSN 1562-3599

Yang, Z (2004) Assessing cumulative damage in concrete and quantifying its influence on life cycle performance modeling. PhD thesis, Purdue University, USA.