Items with Index Term: statistics

Abdel Aziz, A M (2021) The practice of roadway safety management in public-private partnerships. Journal of Construction Engineering and Management, 147(12): 04021173, ISSN 0733-9364

Abdel-Wahab, M S; Dainty, A R J and Ison, S G (2006) How productive is the construction industry? In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Abdel-Wahab, M S; Dainty, A R J and Ison, S G (2008) Insights into the overlap between constructionskills' footprint and other sector skills councils. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Abdel-Wahab, M S; Dainty, A R J; Ison, S G; Bowen, P and Hazlehurst, G (2008) Trends of skills and productivity in the UK construction industry. Engineering, Construction and Architectural Management, 15(4), pp. 372-382. ISSN 0969-9988

Abdi, A; Lind, H and Birgisson, B (2013) Payment mechanisms for winter road maintenance services. Construction Economics and Building, 13(4), pp. 18-31. ISSN 2204-9029

Abduh, M; Sukardi, S N; Wirahadikusumah, R D; Oktaviani, C Z and Bahagia, S N (2023) Maturity of procurement units for public construction projects in Indonesia. International Journal of Construction Management, 23(13), pp. 2171-2184. ISSN 1562-3599

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Abdullah, W M W (2010) Critical factors in project success: A study of public sector construction projects in Malaysia. PhD thesis, University of Malaya, Malaysia.

Abdullahi, A L (2016) Ethnomimicry: the development of a conceptual model of the Nigerian practice of the end-of-life management of buildings. PhD thesis, University of Huddersfield, UK.

Abdulmajid, S A D (1967) Resource forecasting models for private housing projects. PhD thesis, University of Manchester, UK.

Abdulsalam, R S; Chan, M; Masrom, M A N and Nawawi, A H (2024) Benefits and challenges of implementing green building development in Nigeria. Built Environment Project and Asset Management, 14(3), pp. 399-413. ISSN 2044-124X

Abhulimen, P E (2024) The influence of information-sharing and trust on competitiveness and organizational performance in construction supply chain management. DBA thesis, Keiser University, USA.

Abisuga, A O; Famakin, I O and Oshodi, O S (2016) Educational building conditions and the health of users. Construction Economics and Building, 16(4), pp. 19-34. ISSN 2204-9029

Abohilal, S A (2017) Investigating the roles of leaders, managers and their mutual roles in aligning strategy and project management in public sector organisations: the case of the Kingdom of Saudi Arabia. PhD thesis, Brunel University, UK.

Aboneh, A and Mahesh, G (2025) Understanding the key factors of operating environment for small and medium contractors in the developing economies: The case of Ethiopia. Journal of Engineering, Design and Technology, 23(1), pp. 69-87. ISSN 1726-0531

Abubakar, M; Abdullahi, M and Bala, K (2018) Analysis of the causality links between the growth of the construction industry and the growth of the Nigerian economy. Journal of Construction in Developing Countries, 23(1), pp. 103-113. ISSN 1823-6499

Abubakar, M; Zailani, B M; Abdullahi, M and Dodo, M (2021) Skills and competencies for survival in the modern construction industry: Students' perspective in Nigeria. African Journal of Built Environment Research, 5(1), pp. 61-76. ISSN 2414-0236

Abudu, H. D.; Mewomo, M. C.; Adjei, K. O. and Bondinuba, F. K. (2026) An emergency response framework for improving crisis management in facilities: PLS-SEM approach. International Journal of Disaster Resilience in the Built Environment, ISSN 1759-5908

Abudu, Haruna Domanamwin; Mewomo, Cecilia Modupe; Adjei, Kofi Owusu and Bondinuba, Francis Kwesi (2026) The influence of technical and non-technical emergency response systems on infrastructure resilience. Journal of Construction Business and Management, 8(S1), pp. 30-47. ISSN 2521-0165

Adafin, J; Rotimi, J O B and Wilkinson, S (2016) Risk impact assessments in project budget development: Architects' perspectives. Architectural Engineering and Design Management, 12(3), pp. 189-204. ISSN 1745-2007

Adafin, J; Rotimi, J O B and Wilkinson, S (2020) Risk impact assessments in project budget development: Quantity surveyors' perspectives. International Journal of Construction Management, 20(1), pp. 13-28. ISSN 1562-3599

Adafin, J; Rotimi, J O B; Wilkinson, S and Mbachu, J (2019) An assessment of risk factors impacting budget variability in New Zealand commercial construction projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Adam, V; Manu, P; Mahamadu, A M; Dziekonski, K; Kissi, E; Emuze, F and Lee, S (2022) Building information modelling (BIM) readiness of construction professionals: The context of the Seychelles construction industry. Journal of Engineering, Design and Technology, 20(3), pp. 823-840. ISSN 1726-0531

Adebowale, O J (2018) A multi-stakeholder approach to productivity improvement in the South African construction industry. PhD thesis, Nelson Mandela University, South Africa.

Adewunmi, O A; Ibem, E and Amole, D (2014) Satisfaction of first-time residential clients with architectural services. Journal of Engineering, Design and Technology, 12(3), pp. 316-335.

Adu Gyamfi, T; Aigbavboa, C O and Thwala, W D (2024) Risk resources management influence on public-private partnership risk management in construction industry: Confirmatory factor analysis approach. Journal of Engineering, Design and Technology, 22(5), pp. 1544-1569. ISSN 1726-0531

Aduwo, E B; Ibem, E O; Afolabi, A O; Oluwnmi, A O; Tunji-Olayeni, P F; Ayo-Vaughan, E A; Uwakonye, U O and Oni, A A (2020) Exploring anti-corruption capabilities of e-procurement in construction project delivery in Nigeria. Construction Economics and Building, 20(1), pp. 56-76. ISSN 2204-9029

Afolayan, A S (2024) Gentrification-related buyouts and sustainable public low-income housing delivery in Lagos, Nigeria. Construction Economics and Building, 24(3), pp. 23-39. ISSN 2204-9029

Afshar, M R and Asadzadeh Zenozi, H (2022) Introducing a fuzzy MCDM model for financial management in multiple project environments. Construction Innovation, 22(2), pp. 305-319. ISSN 1471-4175

Agbaxode, P D K (2022) A framework to improve design documentation quality using integrated project delivery (IPD) approach. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Agbaxode, P D K; Saghatforoush, E and Dlamini, S (2025) Capabilities required of the conventional project delivery (CPD) approach in producing quality design documentation: The Ghanaian construction industry perspective. Journal of Engineering, Design and Technology, 23(2), pp. 682-701. ISSN 1726-0531

Agbo, B C D (2015) Human capital obsolescence in the building construction industry: Strategic imperatives for Nigeria. PhD thesis, University of Minnesota, USA.

Agboola Abdulazeez, S; Faruq, M Y; Kolawole, M A; Abdulraheem, A A; Aliyu, H D and Zulfat, M O (2025) Impact of consultant performance indicators on project success in public construction projects. Journal of Construction Business and Management, 7(2), pp. 16-32.

Aghimien, D; Aigbavboa, C; Oke, A; Thwala, W and Moripe, P (2022) Digitalization of construction organisations: A case for digital partnering. International Journal of Construction Management, 22(10), pp. 1950-1959. ISSN 1562-3599

Aghimien, D; Aigbavboa, C O; Chan, D W M and Aghimien, E I (2024) Determinants of cloud computing deployment in South African construction organisations using structural equation modelling and machine learning technique. Engineering, Construction and Architectural Management, 31(3), pp. 1037-1060. ISSN 0969-9988

Aghimien, D O; Aigbavboa, C O and Thwala, W D (2019) Microscoping the challenges of sustainable construction in developing countries. Journal of Engineering, Design and Technology, 17(6), pp. 1110-1128. ISSN 1726-0531

Aghimien, L M; Aigbavboa, C O; Anumba, C J and Thwala, W D (2023) A confirmatory factor analysis of the challenges of effective management of construction workforce in South Africa. Journal of Engineering, Design and Technology, 21(4), pp. 1134-1152. ISSN 1726-0531

Agyakwa-Baah, A and Chileshe, N (2010) Construction professionals perception of risk assesssment and management practices: Does length of service in construction industry matter. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Agyekum, K; Adinyira, E and Amudjie, J (2021) Ethical misconducts within the invitation to tender and tender evaluation and award stages of construction contracts in Ghana. Journal of Engineering, Design and Technology, 19(5), pp. 1101-1123. ISSN 1726-0531

Agyekum, K; Adinyira, E and Oppon, J A (2022) Factors limiting the adoption of hemp as an alternative sustainable material for green building delivery in Ghana. International Journal of Building Pathology and Adaptation, 40(2), pp. 202-218. ISSN 23984708

Agyekum, K and Amudjie, J (2024) Challenges to implementing circular economy: Empirical evidence among built environment firms in Ghana. International Journal of Construction Management, 24(3), pp. 281-297. ISSN 1562-3599

Agyekum, K; Hammond, S F and Salgin, B (2021) Occupants' perceived importance and satisfaction with the indoor environmental quality of a green building. Built Environment Project and Asset Management, 11(4), pp. 627-642. ISSN 2044-124X

Agyekum, K; Opoku, A; Oppon, A J and Opoku, D G J (2022) Obstacles to green building project financing: An empirical study in Ghana. International Journal of Construction Management, 22(15), pp. 2922-2930. ISSN 1562-3599

Agyem-Bediako, S F (2007) Management commitment to safety among multinational construction companies in developing countries: A case of Ghana. DSc thesis, University of Massachusetts Lowell, USA.

Ahadzi, M K (2004) Public private partnerships in infrastructure procurement: A generic multi-attribute hierarchical model for minimising pre-contract time and cost overruns (GMAHM). PhD thesis, Heriot-Watt University, UK.

Ahmad, I; Rezai, A; Khan, A and Chileshe, N (2024) Circular economy adoption practices within the South Australian construction industry: Awareness, challenges and future opportunities. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Ahmad, R K (2000) Developing a proactive safety performance measurement tool (SPMT) for construction sites. PhD thesis, Loughborough University, UK.

Ahmad, S B S; Mazhar, M U; Bruland, A; Andersen, B S; Langlo, J A and Torp, O (2020) Labour productivity statistics: A reality check for the Norwegian construction industry. International Journal of Construction Management, 20(1), pp. 39-52. ISSN 1562-3599

Ahuja, R.; Sawhney, A.; Jain, M.; Arif, M. and Rakshit, S. (2020) Factors influencing BIM adoption in emerging markets: The case of India. International Journal of Construction Management, 20(1), pp. 65-76. ISSN 1562-3599

Ahuja, R; Sawhney, A; Jain, M; Arif, M and Rakshit, S (2020) Factors influencing BIM adoption in emerging markets: the case of India. International Journal of Construction Management, 20(1), pp. 65-76. ISSN 1562-3599

Aibinu, A A; Dassanayake, D; Chan, T-K and Thangaraj, R (2015) Cost estimation for electric light and power elements during building design: A neural network approach. Engineering, Construction and Architectural Management, 22(2), pp. 190-213. ISSN 0969-9988

Aidoo, I; Fugar, F; Adinyira, E and Ansah, N B (2023) Assessing the level of resilience in construction safety management systems in the Ghanaian construction industry. Journal of Construction in Developing Countries, 28(2), pp. 217-242. ISSN 1823-6499

Akadiri, O P (2011) Development of a multi-criteria approach for the selection of sustainable materials for building projects. PhD thesis, University of Wolverhampton, UK.

Akadiri, P O and Fadiya, O O (2013) Empirical analysis of the determinants of environmentally sustainable practices in the UK construction industry. Construction Innovation, 13(4), pp. 352-373. ISSN 1471-4175

Akindeinde, A S; Akinola, J A; Ojo, L D and Kenechukwu, O A (2024) Impact of modular integrated construction indicators on sustainable performance metrics in Nigeria. Construction Economics and Building, 24(4-5), pp. 81-97. ISSN 2204-9029

Akinradewo, O; Aghimien, D; Aigbavboa, C and Onyia, M (2022) Factors influencing the adoption of insurance as a risk treatment tool by contractors in the construction industry. International Journal of Construction Management, 22(13), pp. 2484-2492. ISSN 1562-3599

Akinradewo, O; Aigbavboa, C; Oke, A; Edwards, D and Kasongo, N (2023) Key requirements for effective implementation of building information modelling for maintenance management. International Journal of Construction Management, 23(11), pp. 1902-1910. ISSN 1562-3599

Akintola, B F; Jagboro, G O; Ojo, G K and Odediran, S J (2020) Effectiveness of mechanisms for enforcement of ethical standards in the construction industry. Journal of Construction Business and Management, 4(1), pp. 1-12. ISSN 2521-0165

Akinwale, A A and Olusanya, O A (2020) Influence of subcontracting processes on wages and workloads in the building construction industry in Nigeria. Journal of Construction Business and Management, 4(2), pp. 1-10. ISSN 2521-0165

Akuete, E; Nduka, D O and Ogundipe, K E (2022) Maintenance feedback mechanisms and limiting factors of post-occupancy evaluation in student residents of higher education institutions in Nigeria. Journal of Construction in Developing Countries, 27(2), pp. 17-41. ISSN 1823-6499

Al Haadir, Saeed A (2015) Model for improving safety behaviours and outcomes in the Saudi Arabian construction industry. PhD thesis, Griffith University, Saudi Arabia.

Al Hashemi, A (2011) Examining the relationship between migration, labour and crime in UAE: the case of Dubai. PhD thesis, University of Portsmouth, UK.

Al Sanad, S A (2014) The promotion of sustainable construction practices in Kuwait. PhD thesis, University of Manchester, UK.

Al Shamsi, H A A (2015) A framework for group leadership in the construction industry in Abu Dhabi. PhD thesis, University of Wolverhampton, UK.

Al-Bayati, A J; Abudayyeh, O; Fredericks, T and Butt, S E (2017) Reducing fatality rates of the Hispanic workforce in the U.S. Construction industry: Challenges and strategies. Journal of Construction Engineering and Management, 143(3): 04016105, ISSN 0733-9364

Al-Fadhali, N; Zainal, R; Kasim, N; Dodo, M; Kim Soon, N and Hasaballah, A H A (2019) The desirability of integrated influential factors (IIFS) model of internal stakeholder as a panacea to project completion delay in Yemen. International Journal of Construction Management, 19(2), pp. 128-136. ISSN 1562-3599

Al-Hamadani, S; Egbelakin, T; Sher, W and von Meding, J K (2021) Drivers of applying ecological modernization to construction waste minimization in New South Wales construction industry. Construction Economics and Building, 21(3), pp. 80-104. ISSN 2204-9029

Al-Hasan, M A A (2007) A parametric model for the estimation of construction project labour productivity. PhD thesis, Liverpool John Moores University, UK.

Al-Shehri, Y (2015) Relationship between personality trait and multi-national construction workers safety performance in Saudi Arabia. PhD thesis, Loughborough University, UK.

Al-Tubayyeb, S A (1989) Improving construction contract administration utilizing multiattribute statistical analysis on bid stage information. PhD thesis, University of California, Berkeley, USA.

AlShamisi, H A; Chinyio, E; Ankrah, N; Kpamma, Z E; Mushatat, S; Oloke, D and Wilson, P (2019) Prevalence of leadership and management features amongst construction project managers in the UAE. African Journal of Built Environment Research, 3(1), pp. 41-55. ISSN 2414-0236

Alamri, R (2019) Development of a model for health and safety management in Saudi Arabian oil and gas construction projects. PhD thesis, University of Wolverhampton, UK.

Alananga, S; Lucian, C and Kusiluka, M M (2015) Significant cost-push factors in owner-built incremental housing construction in Tanzania. Construction Management and Economics, 33(8), pp. 671-688. ISSN 01446193

Aldhanhani, M A A (2018) Enablers and barriers to knowledge sharing in the UAE infrastructural projects. PhD thesis, British University in Dubai, UAE.

Alharbi, F (2020) Critical delay factors in housing construction projects in Saudi Arabia: Assessment and solutions. PhD thesis, Nottingham Trent University, UK.

Alhiddi, A M (2022) Building better together: The relationship between organisational culture and stakeholder critical success factors in construction projects. PhD thesis, University of Northumbria at Newcastle, UK.

Alhumayn, S A (2018) Developing a framework for BIM implementation in the saudi arabian construction industry. PhD thesis, University of Wolverhampton, UK.

Alhusban, A A and Almshaqbeh, S N (2024) Delivering an inclusive built environment for physically disabled people in public universities (Jordan as a case study). Journal of Engineering, Design and Technology, 22(6), pp. 1980-1998. ISSN 1726-0531

Ali, G M; Olearczyk, J; Bouferguene, A and Al-Hussein, M (2021) Implementation of combined loading to calculate ground bearing pressure under crawler crane tracks. Journal of Construction Engineering and Management, 147(7): 04021051, ISSN 0733-9364

Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways. PhD thesis, London South Bank University, UK.

Aliu, J and Aigbavboa, C (2023) Key generic skills for employability of built environment graduates. International Journal of Construction Management, 23(3), pp. 542-552. ISSN 1562-3599

Aljarman, M (2016) Emerging risk from the application of building information modelling through the life cycle of projects. PhD thesis, University of Liverpool, UK.

Alketbi, S R (2020) Effective implementation of value engineering in the housing construction programmes of the UAE. PhD thesis, University of Wolverhampton, UK.

Alkhaldi, M (2019) Impact of human errors on accidents in the oil and gas industry in Bahrain. PhD thesis, University of Salford, UK.

Almarri, K; Aljarman, M and Boussabaine, H (2019) Emerging contractual and legal risks from the application of building information modelling. Engineering, Construction and Architectural Management, 26(10), pp. 2307-2325. ISSN 0969-9988

Alnsour, J A M (2006) Planning and managing the built environment in the context of compliance with residential standards in Jordan. PhD thesis, University of Huddersfield, UK.

Aloyce, D; Monko, R J and Luvara, V G M (2024) Critical audit indicators for assessing construction projects performance (CPP) at pre-contract stage in Tanzania. International Journal of Construction Management, 24(5), pp. 530-539. ISSN 1562-3599

Alqahtani, F (2017) The relationship between the values of Abu-Dhabi Police and the competencies of their project managers. PhD thesis, University of Wolverhampton, UK.

Alrehaili, Omar (2016) Assessing safety culture among personnel in governmental construction sites at Saudi Arabia: A quantitative study approach. PhD thesis, University of Central Florida, USA.

Alsamadani, R; Hallowell, M R; Javernick-Will, A and Cabello, J (2013) Relationships among language proficiency, communication patterns, and safety performance in small work crews in the United States. Journal of Construction Engineering and Management, 139(9), pp. 1125-1134. ISSN 0733-9364

Alsemari, M A A A and Ramegowda, M (2025) BIM-based approach to manage basra oil company projects. Smart and Sustainable Built Environment, 14(6), pp. 1824-1845. ISSN 2046-6099

Alsharqawi, M; Zayed, T and Shami, A (2020) Ground penetrating radar-based deterioration assessment of RC bridge decks. Construction Innovation, 20(1), pp. 1-17. ISSN 1471-4175

Alsulami, H; Serbaya, S H; Rizwan, A; Saleem, M; Maleh, Y and Alamgir, Z (2023) Impact of emotional intelligence on the stress and safety of construction workers' in Saudi Arabia. Engineering, Construction and Architectural Management, 30(4), pp. 1365-1378. ISSN 0969-9988

Althaqafi, Torky (2015) Using stakeholder theory to explain the development and operation of safety culture and systems to improve safety performance in the construction industry in Saudi Arabia. PhD thesis, University of Adelaide, Australia.

Aluko, O R; Godwin Iroroakpo, I and Mewomo, M C (2021) Relationship between perceived service quality and client satisfaction indicators of engineering consultancy services in building projects. Journal of Engineering, Design and Technology, 19(2), pp. 557-577. ISSN 1726-0531

Alves, T d C L; Neuman, Y; Walsh, K D; Needy, K L and AlMaian, R (2020) Highly effective companies in supplier quality surveillance practices: A quantitative analysis. Construction Management and Economics, 38(3), pp. 239-258. ISSN 01446193

Alzubaidi, H J (1993) Maintenance modelling of a major hospital complex. PhD thesis, University of Salford, UK.

Ameh, O J and Odusami, K T (2014) Nigerian construction professional's education and deficiencies in the area of project management. Journal of Construction in Developing Countries, 19(1), pp. 1-14. ISSN 1823-6499

Ameyaw, C; Mensah, S; Abaitey, B A and Asamoah-Duodu, A (2026) Adequacy of defects liability periods for public construction projects in Ghana. International Journal of Building Pathology and Adaptation, 44(1), pp. 55-69. ISSN 2398-4708

Ameyaw, E. E.; Agyekum-Mensah, G.; Kumar, B. and Edwards, D. J. (2026) Understanding barriers to the adoption of blockchain-enabled smart contracts in construction projects: Perspectives of construction practitioners. Smart and Sustainable Built Environment, 15(2), pp. 597-621. ISSN 2046-6099

Ameyaw, E E; Edwards, D J; Kumar, B; Thurairajah, N; Owusu-Manu, D G and Oppong, G D (2023) Critical factors influencing adoption of blockchain-enabled smart contracts in construction projects. Journal of Construction Engineering and Management, 149(3): 04023003, ISSN 0733-9364

Amoah, C; Kajimo-Shakantu, K and Schalkwyk, T (2021) Meeting the expectations of the social housing recipients in South Africa: A myth or reality? International Journal of Building Pathology and Adaptation, 39(2), pp. 218-234. ISSN 23984708

Amoah, C; Kajimo-Shakantu, K and Van Shalkwyk, T (2022) The level of participation of the end-users in the construction of the rdp houses: The case study of manguang municipality. International Journal of Construction Management, 22(5), pp. 949-960. ISSN 1562-3599

Amoah, C and Nkosazana, H (2022) Effective management strategies for construction contract disputes. International Journal of Building Pathology and Adaptation, 41(6), pp. 70-84. ISSN 23984708

Amsalu Workineh, N; Tarko Kassa, E and Dagnaw Bogale, D (2025) Factors affecting residential land market value: a case study of Injibara Town, Ethiopia. International Journal of Construction Management, 25(2), pp. 215-223. ISSN 1562-3599

Amuda Yusuf, G and Mohamed, S F (2014) Perceived benefits of adopting standard: based pricing mechanism for mechanical and electrical services installations. Construction Economics and Building, 14(2), pp. 104-119. ISSN 2204-9029

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Botchway, E A (2025) Implementing the principles of circular economy in the construction industry: Exploratory and confirmatory factor analyses of strategies. Construction Innovation, 25(3), pp. 761-786. ISSN 1471-4175

Anastasopoulos, P C; Labi, S; Bhargava, A; Bordat, C and Mannering, F L (2010) Frequency of change orders in highway construction using alternate count-data modeling methods. Journal of Construction Engineering and Management, 136(8), pp. 886-893. ISSN 0733-9364

Anastasopoulos, P C; Labi, S; Bhargava, A and Mannering, F L (2012) Empirical assessment of the likelihood and duration of highway project time delays. Journal of Construction Engineering and Management, 138(3), pp. 390-398. ISSN 0733-9364

Annor, John (2025) Building pathways to the future: Leveraging collaborative instruction platforms to address global and regional challenges in construction workforce education. PhD thesis, University of Wyoming, USA.

Ansah, S K (2018) An integrated total quality management model for the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Anson, M; Tang, S L and Ying, K C (2002) Measurement of the performance of ready mixed concreting resources as data for system simulation. Construction Management and Economics, 20(3), pp. 237-250. ISSN 01446193

Apipattanavis, S (2007) Stochastic nonparametric methods for multi-site weather generation and flood frequency estimation: Applications to construction delay, hydrology and agricultural modeling. PhD thesis, University of Colorado at Boulder, USA.

Arambula, E and Gharaibeh, N (2014) Methods for accumulating construction and material quality test results and their effect on acceptance decisions. Journal of Construction Engineering and Management, 140(8): 06014006, ISSN 0733-9364

Ariyachandra, M F (2021) Automating the generation of geometric information models to support digital twinning of existing rail infrastructure. PhD thesis, University of Cambridge, UK.

Arowoiya, V.; Oke, A.; Chan, M. and Adelusi, A. (2026) Benefits of adopting digital twin technology (dtt) in the Nigerian construction industry. International Journal of Construction Management, 26(7), pp. 1134-1148. ISSN 1562-3599

Arslan, M; Cruz, C; Roxin, A M and Ginhac, D (2018) Spatio-temporal analysis of trajectories for safer construction sites. Smart and Sustainable Built Environment, 7(1), pp. 80-100. ISSN 2046-6099

Arthur, A C and Pryke, S D (2014) Are we adding risk to our projects by mixing objective assessments of compound conjunctive and disjunctive project risks with intuitive approaches? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Arvanitis, L.; Al-Tarazi, D.; Agyekum, K.; Kissi, E.; Manu, P.; Mahamadu, A. M.; Booth, C.; Prabhakaran, A. and Pittri, H. (2025) BIM maturity and its influence on BIM implementation challenges: The perspectives of UK contractors. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(4), pp. 231-243. ISSN 1751-4304

Ashdown, M M A; Crawley, J; Biddulph, P; Wingfield, J; Lowe, R and Elwell, C A (2020) Characterising the airtightness of dwellings: Its improvement over time and relationship to construction technique. International Journal of Building Pathology and Adaptation, 38(1), pp. 89-106. ISSN 23984708

Asigri, E O; Afram, S O and Ameyaw, C (2021) Fire safety design attributes of students' housing facilities in KNUST Ghana. African Journal of Built Environment Research, 5(1), pp. 41-58. ISSN 2414-0236

Asmar, M E; Hanna, A S and Whited, G C (2011) New approach to developing conceptual cost estimates for highway projects. Journal of Construction Engineering and Management, 137(11), pp. 942-949. ISSN 0733-9364

Atapattu, C N; Domingo, N and Sutrisna, M (2024) A conceptual cost estimation model for the pre-design stage of road projects using multiple regression analysis. Journal of Financial Management of Property and Construction, 29(3), pp. 388-404. ISSN 1366-4387

Atkinson, A R and Westall, R (2010) The relationship between integrated design and construction and safety on construction projects. Construction Management and Economics, 28(9), pp. 1007-1017. ISSN 1466433X

Awodele, O A (2012) Framework for managing risk in privately financed market projects in Nigeria. PhD thesis, Heriot-Watt University, UK.

Awwad, R E (2010) Neutral and risk-sensitive models for competitive bidding methods based on average and order statistics. PhD thesis, University of Michigan, USA.

Ayodele, T O and Olaleye, A (2022) Fundamental sources of uncertainty in real estate development: Perspectives from an emerging market. International Journal of Construction Management, 22(14), pp. 2775-2787. ISSN 1562-3599

Azmi, A M (2000) The extent of utilization of geographic information systems in California water utilities for task and decision-making support. DPA thesis, University of La Verne, USA.

Baah, B; Acheampong, A; Osei-Asibey, D and Afful, A E (2023) Assessing the role of respectable engagement in improving construction employee's safety perception. Smart and Sustainable Built Environment, 12(5), pp. 937-962. ISSN 2046-6099

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Babalola, H I and Aliu, J O (2026) Lean construction practices for enhancing project delivery in the construction industry: Examining the beneficial outcomes. International Journal of Construction Management, 26(6), pp. 1097-1111. ISSN 1562-3599

Babalola, Akinloluwa S (2025) Application of immersive technologies for occupational safety and health management in the construction industry. PhD thesis, University of Manchester, UK.

Babatunde, S (2015) Developing public private partnership strategy for infrastructure delivery in Nigeria. PhD thesis, Northumbria University, UK.

Babatunde, S O; Perera, S; Ekundayo, D and Adeleke, D S (2020) An investigation into BIM uptake among contracting firms: An empirical study in Nigeria. Journal of Financial Management of Property and Construction, 26(1), pp. 23-48. ISSN 1366-4387

Babatunde, S O; Perera, S; Zhou, L and Udeaja, C (2015) Barriers to public private partnership projects in developing countries: A case of Nigeria. Engineering, Construction and Architectural Management, 22(6), pp. 669-691. ISSN 0969-9988

Babatunde, S O; Perera, S; Zhou, L and Udeaja, C (2016) Stakeholder perceptions on critical success factors for public-private partnership projects in Nigeria. Built Environment Project and Asset Management, 6(1), pp. 74-91. ISSN 2044-124X

Baby, S.; Talebi, S.; Lai, J. H. K.; Tien, P. W. and Kagioglou, M. M. (2026) Mitigating cost estimation challenges in bahrain's construction industry: A problem-solving approach. Built Environment Project and Asset Management, 16(3), pp. 542-560. ISSN 2044-124X

Badi, S (2024) The role of blockchain in enabling inter-organisational supply chain alignment for value co-creation in the construction industry. Construction Management and Economics, 42(3), pp. 266-288. ISSN 01446193

Badi, S; Ochieng, E; Nasaj, M and Papadaki, M (2021) Technological, organisational and environmental determinants of smart contracts adoption: UK construction sector viewpoint. Construction Management and Economics, 39(1), pp. 36-54. ISSN 01446193

Balgheeth, Y (2016) Enhancing existing health and safety processes in public sector construction projects within Saudi Arabia using building information modelling approaches. PhD thesis, University of Salford, UK.

Banwo, O O (2022) Development of a framework for building cost information management in Nigeria. PhD thesis, Coventry University, UK.

Barber Jr., H M (2013) Economic assessment of the construction industry: A construction-economics nexus. PhD thesis, Mississippi State University, USA.

Barlow, P L (2015) Assessment of subcontractor quality on California hospital construction projects through third-party inspections. PhD thesis, University of Florida, USA.

Bartlett, H V (2006) Understanding the implementation of sustainability principles in UK educational building projects. PhD thesis, University of Cambridge, UK.

Bashir, A M (2013) A framework for utilising lean construction strategies to promote safety on construction sites. PhD thesis, University of Wolverhampton, UK.

Bates, A J (2008) The owner's role in project success. PhD thesis, Polytechnic University, USA.

Baughan, R and Crapper, M (2016) Competence management in the UK heritage railway industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Becker, P E (2000) Modeling construction worker chemical exposures for compliance with OSHA permissible exposure limits: An investigation of lead exposures to highway bridge maintenance workers. DSc thesis, University of Massachusetts Lowell, USA.

Beitelmal, W; Molenaar, K R; Javernick-Will, A and Pellicer, E (2017) Challenges and barriers to establishing infrastructure asset management: A comparative study between Libya and the USA. Engineering, Construction and Architectural Management, 24(6), pp. 1184-1202. ISSN 0969-9988

Bekele, A A and Mahesh, G (2024) Exploring the impact of endogenic factors on the competency of small and medium contractors in the Ethiopian construction industry. Journal of Construction in Developing Countries, 29(1), pp. 211-245. ISSN 1823-6499

Bello, A O; Isa, R B; Oke, A E; Arogundade, S and Lewis, J M O (2026) Circular economy implementation in the construction industry: An examination of the barriers in a developing country. International Journal of Building Pathology and Adaptation, 44(1), pp. 143-162. ISSN 2398-4708

Bello, A O and Ayegba, C (2025) Adoption of building information modelling for post-construction in Nigeria: Examination of barriers and strategies development. International Journal of Building Pathology and Adaptation, 43(6), pp. 1501-1521. ISSN 2398-4708

Bello, N A; Agava, Y H and Olanrele, O O (2021) Investment property typology analysis; evidence from Nigerian urban property returns and macroeconomic variables. African Journal of Built Environment Research, 5(1), pp. 77-96. ISSN 2414-0236

Bentil, K K (1990) A model approach for predicting commercial construction site accidents. PhD thesis, University of Florida, USA.

Bhattacharya, S; Momaya, K S and Iyer, K C (2021) Bridging the gaps for business growth among Indian construction companies. Built Environment Project and Asset Management, 11(2), pp. 231-250. ISSN 2044-124X

Bichard, E and Thurairajah, N (2014) Trialling behaviour change strategies to motivate interest in property level flood protection. International Journal of Disaster Resilience in the Built Environment, 5(2), pp. 130-143. ISSN 1759-5916

Bin Sh Said, S A A (2020) The adoption of building information modelling in facilities management. PhD thesis, Oxford Brookes University, UK.

Blomenkamp, M (2011) A program evaluation of the building construction of Bellevue Elementary School for the Bellevue Public Schools. EdD thesis, University of Nebraska at Omaha, USA.

Boadi, R (2020) A best practice framework for public-private partnerships (PPPs) in road projects: the case of Ghana. PhD thesis, University of Salford, UK.

Boadu, E F; Sunindijo, R Y; Wang, C C and Frimpong, S (2023) Factors constraining the promotion of health and safety in public works procurement in developing countries. International Journal of Construction Management, 23(9), pp. 1611-1621. ISSN 1562-3599

Boadu, Elijah Frimpong (2022) A framework for promoting health and safety through procurement in the construction industry in developing countries: A case of Ghana. PhD thesis, University of New South Wales, Australia.

Boateng, E B (2021) The role of human safety interventions on co-workers’ safety outcomes in construction projects. PhD thesis, University of Newcastle, Australia.

Boothman, C and Craig, N (2016) Five star status in the UK house building sector: A realistic indication of customer satisfaction or pure fantasy. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The Batalha Monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Bourgeois, I.; Ferreira, V. and Rodrigues, H. (2026) From monitoring to forecasting: Predictive modelling of thermal-induced displacements in heritage masonry: The batalha monastery case study. International Journal of Building Pathology and Adaptation, 44(9), pp. 16-34. ISSN 2398-4708

Boussabaine, A H; Kirkham, R J and Grew, R G (1999) Estimating the cost of energy usage in sport centres: A comparative modelling approach. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Boustras, G; Bratskas, R; Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(1), pp. 19-31. ISSN 1726-0531

Bowen, P; Edwards, P and Lingard, H (2013) Workplace stress among construction professionals in South Africa the role of harassment and discrimination. Engineering, Construction and Architectural Management, 20(6), pp. 620-635. ISSN 0969-9988

Bowen, P; Jay, I; Cattell, K and Edwards, P (2010) Value management awareness and practice by South African architects: An empirical study. Construction Innovation, 10(2), pp. 203-222. ISSN 1471-4175

Bowen, R M (1978) Valuation of capitalized interest on construction expenditures in the electric utility industry. PhD thesis, Stanford University, USA.

Braimah, N (2008) An investigation into the use of construction delay and disruption analysis methodologies. PhD thesis, University of Wolverhampton, UK.

Briscoe, G (2005) Women and minority groups in UK construction: Recent trends. Construction Management and Economics, 23(10), pp. 1001-1005. ISSN 01446193

Briscoe, G (2006) How useful and reliable are construction statistics? Building Research & Information, 34(3), pp. 220-229. ISSN 0961-3218

Briscoe, G (2008) Studies of the UK labour market with special reference to the construction sector. PhD thesis, Coventry University, UK.

Bruhns, H and Wyatt, P (2011) A data framework for measuring the energy consumption of the non-domestic building stock. Building Research & Information, 39(3), pp. 211-226. ISSN 0961-3218

Budiwibowo, A; Trigunarsyah, B; Abidin, I S and Soeparto, H G (2009) Competitiveness of the Indonesian construction industry. Journal of Construction in Developing Countries, 14(1), pp. 51-68. ISSN 1823-6499

Cabahug, R R; Edwards, D J and Nicholas, J (2004) Classifying plant operator maintenance proficiency: Examining personal variables. Building Research & Information, 32(2), pp. 119-127. ISSN 0961-3218

Cabahug, Ruel R (2003) A profile for classifying plant operator maintenance proficiency. PhD thesis, Loughborough University, UK.

Calhoun, M E (2015) Synergistic effects among leading indicators of construction safety management. PhD thesis, University of Alaska Fairbanks, USA.

Campbell, J L (1999) A baseline study of practices and perceptions of marketing and aftermarketing activities among commercial general contractors. PhD thesis, University of Idaho, USA.

Cannon, J (1994) Lies and construction statistics. Construction Management and Economics, 12(4), pp. 307-313. ISSN 01446193

Carney, M; Wall, J; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E and Önwy-Yazici, E (2008) Challenges to delivering safety training through virtual classes. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Castillo, T; Herrera, R F and Alarcón, L F (2023) The quality of small social networks and their performance in architecture design offices. Journal of Construction Engineering and Management, 149(2): 04022162, ISSN 0733-9364

Cavalcante, Marcelo Gadelha (2019) Formation of operational risk in civil construction. PhD thesis, Universidade de Fortaleza, Brazil.

Chadee, A A; Martin, H; Chadee, X T; Bahadoorsingh, S and Olutoge, F (2023) Root cause of cost overrun risks in public sector social housing programs in sids: Fuzzy synthetic evaluation. Journal of Construction Engineering and Management, 149(11): 04023106, ISSN 0733-9364

Chan, A P C; Wong, F K W; Chan, D W M; Yam, M C H; Kwok, A W K; Lam, E W M and Cheung, E (2008) Work at height fatalities in the repair, maintenance, alteration, and addition works. Journal of Construction Engineering and Management, 134(7), pp. 527-535. ISSN 0733-9364

Chan, C T W and Sher, W (2014) Exploring AEC education through collaborative learning. Engineering, Construction and Architectural Management, 21(5), pp. 532-550. ISSN 0969-9988

Chan, D W M; Olawumi, T O; Saka, A B and Ekundayo, D (2024) Comparative analysis of the barriers to smart sustainable practices adoption in the construction industry between Hong Kong and Nigeria. International Journal of Construction Management, 24(14), pp. 1499-1509. ISSN 1562-3599

Chan, D W M; Sarvari, H; Golestanizadeh, M and Saka, A (2024) Evaluating the impact of organizational learning on organizational performance through organizational innovation as a mediating variable: Evidence from Iranian construction companies. International Journal of Construction Management, 24(9), pp. 921-934. ISSN 1562-3599

Chan, K-W (2010) The transaction costs and the choice of contractual arrangements in the construction industry in Hong Kong. PhD thesis, University of Hong Kong, Hong Kong.

Chandra, Shailja (2006) Investigating green building assessment tools: a risk-analysis based approach. PhD thesis, University of New South Wales, Australia.

Chang, J; Xie, X and Parlikad, A K (2025) Cloud-based building information modelling (CBIM): Software engineers' insights into improving asset information quality. Built Environment Project and Asset Management, 15(3), pp. 594-611. ISSN 2044-124X

Chang, L M (1986) Inferential statistics for craftsman questionnaire. Journal of Construction Engineering and Management, 112(4), pp. 492-499. ISSN 0733-9364

Chang, L M and Hsie, M (1995) Developing acceptance-sampling methods for quality construction. Journal of Construction Engineering and Management, 121(2), pp. 246-253. ISSN 0733-9364

Chang, L-M (1983) Evaluation and improvement of craftsman questionnaire in measuring construction productivity. PhD thesis, University of Texas at Austin, USA.

Charles, S; Vidyaratne, H and Melagoda, D G (2020) Prospects and restraints of green roofs for high-rise buildings in Sri Lanka. Built Environment Project and Asset Management, 10(2), pp. 246-260. ISSN 2044-124X

Chau, K W (1993) Estimating industry-level productivity trends in the building industry from building cost and price data. Construction Management and Economics, 11(5), pp. 370-383. ISSN 01446193

Chau, K W and Walker, A (1988) The measurement of total factor productivity of the Hong Kong construction industry. Construction Management and Economics, 6(3), pp. 209-224. ISSN 01446193

Chau, K W and Wang, Y S (2005) An analyseis of productivity growth in the construction industry: A non-parametric approach. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Chavan, A. P.; Ghosh, S. and McCuen, T. (2026) Use of virtual reality in construction education: USA educators' perspectives. International Journal of Building Pathology and Adaptation, 44(4), pp. 849-866. ISSN 2398-4708

Chehayeb, N N (1996) Simulation-based project control. PhD thesis, University of Alberta, Canada.

Chen, X; Chang-Richards, A; Ling, F Y Y; Yiu, T W; Pelosi, A and Yang, N (2025) Digital technologies in the AEC sector: A comparative study of digital competence among industry practitioners. International Journal of Construction Management, 25(1), pp. 63-76. ISSN 1562-3599

Chen, Y; Cai, X; Li, J; Lin, P; Song, H; Liu, G; Cao, D and Ma, X (2023) The values and barriers of BIM implementation combination evaluation based on stakeholder theory: A study in China. Engineering, Construction and Architectural Management, 30(7), pp. 2814-2836. ISSN 0969-9988

Cheng, E W L; Li, H and Fox, P (2007) Job performance dimensions for improving final project outcomes. Journal of Construction Engineering and Management, 133(8), pp. 592-599. ISSN 0733-9364

Chia, F C; Skitmore, M; Gray, J and Bridge, A (2018) International comparisons of nominal and real construction labour productivity. Engineering, Construction and Architectural Management, 25(7), pp. 896-915. ISSN 0969-9988

Chia, F C; Skitmore, M; Runeson, G and Bridge, A (2012) An analysis of construction productivity in Malaysia. Construction Management and Economics, 30(12), pp. 1055-1069. ISSN 1466433X

Chia, Fah Choy (2011) Economic fluctuations and productivity in the Malaysian construction sector. PhD thesis, Queensland University of Technology, Australia.

Chigara, B. and Smallwood, J. (2026) The impact of procurement on construction health and safety (H&S) in Zimbabwe. Journal of Engineering, Design and Technology, 24(4), pp. 943-962. ISSN 1726-0531

Chigara, B (2018) Integrating sustainability principles in construction health and safety management practices in Zimbabwe. PhD thesis, Nelson Mandela University, South Africa.

Chigara, B and Moyo, T (2022) Factors affecting the delivery of optimum health and safety on construction projects during the covid-19 pandemic in Zimbabwe. Journal of Engineering, Design and Technology, 20(1), pp. 24-46. ISSN 1726-0531

Chigara, B and Moyo, T (2023) The impact of COVID-19 on the construction sector in Zimbabwe. Journal of Construction in Developing Countries, 28(1), pp. 91-111. ISSN 1823-6499

Chileshe, N and Boadua Yirenkyi-Fianko, A (2012) An evaluation of risk factors impacting construction projects in Ghana. Journal of Engineering, Design and Technology, 10(3), pp. 306-329. ISSN 1726-0531

Chileshe, N; Edwards, D J; Kavishe, N and Haupt, T C (2020) Perception on challenges impacting bid decision of indigenous building contractors in Dar es Salaam, Tanzania. Journal of Engineering, Design and Technology, 18(6), pp. 1641-1662. ISSN 1726-0531

Chileshe, N and Haupt, T C (2007) Age influences on the job satisfaction of construction workers: Evidence from South Africa. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Chileshe, N and Haupt, T C (2010) An empirical analysis of factors impacting career decisions in South African construction industry: Male and female high school students' perspectives. Journal of Engineering, Design and Technology, 8(2), pp. 221-239. ISSN 1726-0531

Chileshe, N and John Kikwasi, G (2014) Risk assessment and management practices (ramp) within the Tanzania construction industry: Implementation barriers and advocated solutions. International Journal of Construction Management, 14(4), pp. 239-254. ISSN 1562-3599

Chileshe, N and Kavishe, N (2020) Capacity building for Tanzanian public-private partnerships (PPPs) projects: Challenges and advocated solutions. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Chileshe, N and Kavishe, N (2022) Human capacity building strategies for improving PPP implementation in Tanzanian construction projects. Built Environment Project and Asset Management, 12(6), pp. 906-923. ISSN 2044-124X

Chileshe, N; Kavishe, N and Edwards, D J (2021) Critical factors influencing the bid or no-bid decision of the indigenous small building contractors in Tanzania. Construction Innovation, 21(2), pp. 182-202. ISSN 1471-4175

Chileshe, N; Kavishe, N and Edwards, D J (2023) Identification of critical capacity building challenges in public-private partnerships (PPPs) projects: The case of Tanzania. International Journal of Construction Management, 23(3), pp. 495-504. ISSN 1562-3599

Chileshe, N and Kikwasi, G J (2014) Critical success factors for implementation of risk assessment and management practices within the Tanzanian construction industry. Engineering, Construction and Architectural Management, 21(3), pp. 291-319. ISSN 0969-9988

Chileshe, N; Njau, C W; Kibichii, B K; Macharia, L N and Kavishe, N (2022) Critical success factors for public-private partnership (PPP) infrastructure and housing projects in Kenya. International Journal of Construction Management, 22(9), pp. 1606-1617. ISSN 1562-3599

Chileshe, N; Rameezdeen, R; Lehmann, S and Hosseini, M r (2014) Reverse logistics (RL) implementation among contractors in Australia: Practices and barriers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Chileshe, N and Sim, Y L (2007) Desirable management practices and cultural values for construction quality assessment systems (CONQUAS): Methodology for deployment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Chileshe N, K G J (2013) Perception of barriers to implementing risk assessment and management practices by construction professionals in Tanzania. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Chinyio, E; Gameson, R and Suresh, S (2011) The management of construction stakeholders by higher education institutions (HEIs) in the United Kingdom (UK): A pilot study. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Chinyio, E; Suresh, S and Salisu, J B (2018) The impacts of monetary rewards on public sector employees in construction: A case of Jigawa State in Nigeria. Journal of Engineering, Design and Technology, 16(1), pp. 125-142.

Chiwuzie, A; Dabara, D I; Omotehinshe, O J; Prince, E M and Aiyepada, E G (2021) Changing macroeconomic indicators and the rental values of residential properties in Ede Nigeria. African Journal of Built Environment Research, 5(1), pp. 1-18. ISSN 2414-0236

Cho, Y-K (2000) Human-assisted rapid workspace modeling for construction equipment operations. PhD thesis, University of Texas at Austin, USA.

Chong, W-h B (2016) A process-data supported input-output framework for delineating the embodied emissions of Hong Kong construction industry. PhD thesis, University of Hong Kong, Hong Kong.

Choy, C F (2011) Revisiting the 'Bon Curve'. Construction Management and Economics, 29(7), pp. 695-712. ISSN 1466433X

Christudason, A; Kenna, P and Ball, J (2010) Using banks: The effect of national attitudes to public intervention in mortgage lending and eviction in French and English law. International Journal of Law in the Built Environment, 2(2), pp. 118-137. ISSN 1756-1450

Cirilovic, J; Vajdic, N; Mladenovic, G and Queiroz, C (2014) Developing cost estimation models for road rehabilitation and reconstruction: Case study of projects in Europe and Central Asia. Journal of Construction Engineering and Management, 140(3): 4013065, ISSN 0733-9364

Clark, R D (2002) Components of selected public -private partnerships to build new schools in California. EdD thesis, University of La Verne, USA.

Clawson, Bobie Sue Anna (2024) The influence of walking surface types on gait parameters, kinematics and worker perceptions in relation to slips, trips, and fall incidents in the construction industry. PhD thesis, Indiana University of Pennsylvania, USA.

Cleary, J (2024) Data driven insights into building project performance and outcomes through advanced data analytics. PhD thesis, Arizona State University, USA.

Cokeham, M and Tutesigensi, A (2013) An investigation of construction accidents in Rwanda: Perspectives from Kigali. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(4), pp. 179-187. ISSN 17514312

Col Debella, D and Ries, R (2006) Construction delivery systems: A comparative analysis of their performance within school districts. Journal of Construction Engineering and Management, 132(11), pp. 1131-1138. ISSN 0733-9364

Coutinho, Maria Lucia Granja (2016) Managerial roles in project-oriented businesses. PhD thesis, Universidade de São Paulo, Brazil.

Cozens, P; Waters, J and Neale, R (2002) A virtual reality approach to personal safety and the design of built environment facilities. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Crowley, L G (1997) Robust statistical estimators for use within competitive bid data. Journal of Construction Engineering and Management, 123(1), pp. 53-63. ISSN 0733-9364

Dada, J O and Bamigboye, G O (2021) Diagnosing the causes of quackery in quantity surveying practice in Lagos State, Nigeria. Journal of Construction Business and Management, 5(1), pp. 28-37. ISSN 2521-0165

Dadzoe, F; Addy, M; Duah, D Y A and Adesi, M (2024) Towards a circular economy: A knowledge-attitude gap between demand and supply-side operators on green building construction in Ghana. Smart and Sustainable Built Environment, 13(4), pp. 763-779. ISSN 2046-6099

Dai, J and Goodrum, P M (2011) Differences in perspectives regarding labor productivity between Spanish-and English-speaking craft workers. Journal of Construction Engineering and Management, 137(9), pp. 689-697. ISSN 0733-9364

Dai, J; Goodrum, P M and Maloney, W F (2009) Construction craft workers' perceptions of the factors affecting their productivity. Journal of Construction Engineering and Management, 135(3), pp. 217-226. ISSN 0733-9364

Damoah, I S (2015) An investigation into the causes and effects of project failure in government projects in developing countries: Ghana as a case study. PhD thesis, Liverpool John Moores University, UK.

Dandago, A A; Yamusa, M A; Lawal, H S; Abubakar, M; Abdullahi, M and Zailani, B M (2025) Impact of uncertainty factors on the performance of building renovation projects. Journal of Engineering, Design and Technology, 23(6), pp. 1875-1897. ISSN 1726-0531

Dandan, T H; Sweis, G; Sukkari, L S and Sweis, R J (2020) Factors affecting the accuracy of cost estimate during various design stages. Journal of Engineering, Design and Technology, 18(4), pp. 787-819. ISSN 1726-0531

Davenport, D M (1998) A comparative study of the effectiveness of the UK and French construction industries in the achievement of satisfaction with performance as perceived by the construction client. PhD thesis, University of Central Lancashire, UK.

David, D D (2007) Numerical platform to validate resistivity testing for NDE of civil engineering structures. PhD thesis, Wayne State University, USA.

Deacon, H A and Kajimo-Shakantu, K (2024) The prevalence of claims under the JBCC principal building agreement in South Africa. International Journal of Construction Management, 24(3), pp. 331-338. ISSN 1562-3599

Debrah, C; Owusu-Manu, D G; Amonoo-Parker, L; Baiden, B K; Oduro-Ofori, E and Edwards, D J (2023) A factor analysis of the key sustainability content underpinning green cities development in Ghana. International Journal of Construction Management, 23(14), pp. 2469-2478. ISSN 1562-3599

Delaney, F T (2003) Effectiveness of mergers and acquisitions and corporate financial performance in construction. PhD thesis, Edinburgh Napier University, UK.

Delaney, F T and Wamuziri, S C (2002) Corporate profitability in construction and allied industries. Journal of Financial Management of Property and Construction, 7(2), pp. 107-116. ISSN 1366-4387

Dhanasekar, Y and Anandh, K S (2025) Deciphering the role of age and gender in perceiving organizational politics in construction. Built Environment Project and Asset Management, 15(2), pp. 354-370. ISSN 2044-124X

Dharmapalan, V; O'Brien, W J; Morrice, D and Jung, M (2021) Assessment of visibility in industrial construction projects: A viewpoint from supply chain stakeholders. Construction Innovation, 21(4), pp. 782-799. ISSN 1471-4175

Dikmen, I; Birgonul, M T and Budayan, C (2009) Strategic group analysis in the construction industry. Journal of Construction Engineering and Management, 135(4), pp. 288-297. ISSN 0733-9364

Ding, Z; Zuo, J; Wang, J and Zillante, G (2016) Searching for niche market for engineering consultants: Case of regional supervision systems in China. Engineering, Construction and Architectural Management, 23(5), pp. 622-637. ISSN 0969-9988

Dosumu, O S (2018) Perceived effects of prevalent errors in contract documents on construction projects. Construction Economics and Building, 18(1), pp. 1-26. ISSN 2204-9029

Dowd, V G (1999) The pervading role of risk allocation as the link mechanism between factors of influence and construction procurement practices adopted in the UK construction industry over the period 1965-1995. PhD thesis, Nottingham Trent University, UK.

Drew, D; Li, H and Shen, L Y (2000) Feedback in competitive fee tendering. Journal of Construction Procurement, 6(2), ISSN 1358-9180

Driza, P J N and Park, N K (2014) Occupant satisfaction in LEED-certified higher education buildings. Smart and Sustainable Built Environment, 3(3), pp. 223-236. ISSN 2046-6099

Drèze, J (1983) On the choice of shadow prices for project evaluation. PhD thesis, Indian Statistical Institute - Kolkata, India.

Duffield, Colin F (2001) An evaluation framework for privately funded infrastructure projects in Australia. PhD thesis, University of Melbourne, Australia.

Dursun, O and Stoy, C (2011) Time-cost relationship of building projects: Statistical adequacy of categorization with respect to project location. Construction Management and Economics, 29(1), pp. 97-106. ISSN 1466433X

Ebiloma, D. O.; Aigbavboa, C. O. and Anumba, C. (2026) Key drivers of digital twin maintenance management for healthcare facilities in Nigeria. Engineering, Construction and Architectural Management, 33(3), pp. 1871-1890. ISSN 0969-9988

Edwards, D J (2003) Accident trends involving construction plant: an exploratory analysis. Journal of Construction Research, 4(2), pp. 161-173. ISSN 1609-9451

Edwards, D J; Nicholas, J and Sharp, R (2001) Forecasting UK construction plant sales. Engineering, Construction and Architectural Management, 8(3), pp. 171-176. ISSN 0969-9988

Egbu, C O and Bernard, P (2000) Organizational core competencies and their influence on strategic partnering in registered social landlords (rsls). In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Ejidike, C C; Mewomo, M C and Anugwo, I C (2024) Assessment of construction professionals' awareness of the smart building concepts in the Nigerian construction industry. Journal of Engineering, Design and Technology, 22(5), pp. 1491-1504. ISSN 1726-0531

Ekemode, B G (2020) Impact of urban regeneration on commercial property values in Osogbo, Osun State, Nigeria. Smart and Sustainable Built Environment, 9(4), pp. 557-571. ISSN 2046-6099

El Asmar, M; Hanna, A S and Loh, W Y (2016) Evaluating integrated project delivery using the project quarterback rating. Journal of Construction Engineering and Management, 142(1): 04015046, ISSN 0733-9364

Elasu, J; Kimuli, B R and Adaramola, M S (2022) Cooking fuel choices of households in urban areas in Uganda: A multinomial probit regression analysis. International Journal of Building Pathology and Adaptation, 40(2), pp. 283-298. ISSN 23984708

Elazouni, A M (2006) Classifying construction contractors using unsupervised-learning neural networks. Journal of Construction Engineering and Management, 132(12), pp. 1242-1253. ISSN 0733-9364

Elijah, O O and Oluwasuji, D J (2019) An evaluation of training needs of the Nigerian construction professionals in adopting building information modelling. Journal of Construction in Developing Countries, 24(2), pp. 63-81. ISSN 1823-6499

Emere, C E; Clinton, C; Thwala, W D and Akinradewo, O I (2025) A principal component analysis of sustainable building construction features for project delivery in South Africa. Journal of Engineering, Design and Technology, 23(5), pp. 1463-1482. ISSN 1726-0531

Esangbedo, O; Bilge, E and Yasemin, N (2024) Factors analysis on stakeholder management to achieve sustainable buildings. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Escamilla, E; Ostadalimakhmalbaf, M and Bigelow, B F (2016) Factors impacting Hispanic high school students and how to best reach them for the careers in the construction industry. International Journal of Construction Education and Research, 12(2), pp. 82-98. ISSN 1557-8771

Espada, R; Apan, A and McDougall, K (2017) Vulnerability assessment of urban community and critical infrastructures for integrated flood risk management and climate adaptation strategies. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 375-411. ISSN 1759-5916

Essien, I O (2021) Modelling project complexity for leadership decision making and success in the building construction industry in Lagos, Nigeria. PhD thesis, Oxford Brookes University, UK.

Evans, M (2022) Strategic frameworks for managing lean construction on megaprojects: towards global integrated delivery and corporate governance. PhD thesis, University of Bolton, UK.

Evarist, C; G.M. Luvara, V and Chileshe, N (2025) Rethinking the recruitment and selection practices of indigenous building contractors in Dar es Salaam, Tanzania: criteria and methods. International Journal of Construction Management, 25(2), pp. 149-160. ISSN 1562-3599

Evarist, C; Luvara, V G M and Chileshe, N (2023) Perception on constraining factors impacting recruitment and selection practices of building contractors in Dar es Salaam, Tanzania. International Journal of Construction Management, 23(12), pp. 2012-2023. ISSN 1562-3599

Ewuga, D; Opiyo, N and Oyegoke, A S (2025) An evaluation of the delivery of quantity surveying degree apprenticeship in UK universities. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(3), pp. 180-187. ISSN 17514304

Fadiya, O O; Georgakis, P; Chinyio, E and Akadiri, P (2013) Analysing the perceptions of UK building contractors on the contributors to the cost of construction plant theft. Journal of Financial Management of Property and Construction, 18(2), pp. 128-141. ISSN 1366-4387

Faheem Haider, M.; Aslam, M.; Khan, R. W. A. and Malik, M. S. A. (2026) Exploring the factors to improve complaint management system in building management through a case study. International Journal of Construction Management, 26(9), pp. 1777-1798. ISSN 1562-3599

Famakin, I O; Moyanga, D T and Agboola, A A (2024) Effect of innovative practices on the growth of quantity surveying firms in Nigeria. Journal of Engineering, Design and Technology, 22(6), pp. 1723-1741. ISSN 1726-0531

Fapohunda, J A (2009) Operational framework for optimal utilisation of construction resources during the production process. PhD thesis, Sheffield Hallam University, UK.

Fatayer, F A; Issa, A Z; Abunemeh, M and Dwikat, M A M (2022) Investigating the causes preventing the fulfillment of construction contract requirements. Engineering, Construction and Architectural Management, 29(7), pp. 2577-2598. ISSN 0969-9988

Fenn, F P (1999) An aetiology of construction disputes. PhD thesis, University of Manchester, UK.

Fini, A A F and Forsythe, P (2020) Barriers to reusing and recycling office fit-out: An exploratory analysis of demolition processes and product features. Construction Economics and Building, 20(4), pp. 42-62. ISSN 2204-9029

Fuller, J; Brown, C J and Crowley, R (2018) Performance-based maintenance contracting in Florida: Evaluation by surveys, statistics, and content analysis. Journal of Construction Engineering and Management, 144(2): 05017021, ISSN 0733-9364

Ghanem, A and Edirisinghe, R (2024) Socio-economic disparities in greenspace quality: Insights from the city of Melbourne. Smart and Sustainable Built Environment, 13(2), pp. 309-329. ISSN 2046-6099

Gholizadeh, P and Esmaeili, B (2020) Cost of occupational incidents for electrical contractors: Comparison using robust-factorial analysis of variance. Journal of Construction Engineering and Management, 146(7): 0001861, ISSN 0733-9364

Ghorbany, S; Yousefi, S and Noorzai, E (2024) Evaluating and optimizing performance of public-private partnership projects using copula Bayesian network. Engineering, Construction and Architectural Management, 31(1), pp. 290-323. ISSN 0969-9988

Gichunge, H K; Masu, S M and K'Akumu, O A (2010) Factor cost indices practices in the building industry for Nairobi, Kenya. Journal of Financial Management of Property and Construction, 15(1), pp. 61-70. ISSN 1366-4387

Gillott, M; Holland, R; Riffat, S and Fitchett, J A (2006) Post-occupancy evaluation of space use in a dwelling using RFID tracking. Architectural Engineering and Design Management, 2(4), pp. 273-288. ISSN 1745-2007

Ginigaddara, B; Perera, S; Feng, Y and Rahnamayiezekavat, P (2022) An evaluation of offsite construction skill profiles. Journal of Financial Management of Property and Construction, 27(1), pp. 16-28. ISSN 1366-4387

Giri, O P; Sainju, P R and Htet, A (2025) Evaluating occupational health and safety practices in an airport construction project in Nepal. Built Environment Project and Asset Management, 15(1), pp. 149-164. ISSN 2044-124X

Gledson, B J and Phoenix, C (2017) Exploring organisational attributes affecting the innovativeness of UK SMEs. Construction Innovation, 17(2), pp. 224-243. ISSN 1471-4175

Goldswain C, S J (2013) Key inputs into a designing for construction health, safety, and ergonomics model in South Africa. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Golec, J A (1980) Aftermath of disaster: The Teton Dam break. PhD thesis, Ohio State University, USA.

Gonsalves, N; Afolabi, A and Akanmu, A A (2025) Impact of social influence on construction workers' intention-to-use exoskeletons. Smart and Sustainable Built Environment, 14(4), pp. 1073-1090. ISSN 2046-6099

Gonsalves, N J; Yusuf, A; Ogunseiju, O and Akanmu, A (2024) Evaluation of concrete workers' interaction with a passive back-support exoskeleton. Engineering, Construction and Architectural Management, 31(11), pp. 4585-4601. ISSN 0969-9988

Goodrum, P M and Dai, J (2005) Differences in occupational injuries, illnesses, and fatalities among Hispanic and non-Hispanic construction workers. Journal of Construction Engineering and Management, 131(9), pp. 1021-1028. ISSN 0733-9364

Gosling, J; Naim, M; Towill, D; Abouarghoub, W and Moone, B (2015) Supplier development initiatives and their impact on the consistency of project performance. Construction Management and Economics, 33(5-6), pp. 390-403. ISSN 01446193

Green, M F (1975) The application of probabilistic methods to building design. PhD thesis, University of Surrey, UK.

Gruneberg, S and Hughes, W P (2005) UK construction orders and output: A comparison of government and commercially available data 1995-2001. Journal of Financial Management of Property and Construction, 10(2), pp. 83-94. ISSN 1366-4387

Gunderson, D E (2005) Needs assessment: Construction management doctoral programs in the United States. PhD thesis, Colorado State University, USA.

Gurmu, A T (2026) Econometric analysis of macroeconomic factors influencing construction labour productivity at industry level: Evidence from Australia. Construction Management and Economics, 44(1), pp. 23-40. ISSN 0144-6193

Gyi, D E; Gibb, A G F and Haslam, R A (1999) The quality of accident and health data in the construction industry: Interviews with senior managers. Construction Management and Economics, 17(2), pp. 197-204. ISSN 01446193

Gyimah, S; Owusu-Manu, D G; Edwards, D J; Buertey, J I T and Danso, A K (2025) Exploring the contributions of circular business models towards the transition of green economy in the Ghanaian construction industry. Smart and Sustainable Built Environment, 14(3), pp. 859-880. ISSN 2046-6099

Habtu, T. M.; A. Elsaigh, W. and Musonda, I. (2026) Toward a strategic framework for AI-BIM adoption in Ethiopian road infrastructure management. Engineering, Construction and Architectural Management, 33(15), pp. 564-589. ISSN 0969-9988

Hanna, A S; Mikhail, G and Iskandar, K A (2017) State of prefab practice in the electrical construction industry: Qualitative assessment. Journal of Construction Engineering and Management, 143(2): 04016097, ISSN 0733-9364

Haponava, T and Al-Jibouri, S (2010) Influence of process performance during the construction stage on achieving end-project goals. Construction Management and Economics, 28(8), pp. 853-869. ISSN 1466433X

Harison, J C (1993) Laboring class, dangerous class, insurgent class: The Paris building trades, 1830-1871. PhD thesis, University of Iowa, USA.

Hashemi, H; Mousavi, S M and Mojtahedi, S M H (2011) Bootstrap technique for risk analysis with interval numbers in bridge construction projects. Journal of Construction Engineering and Management, 137(8), pp. 600-608. ISSN 0733-9364

Heron, E; Bowen, P and Lincoln, D (2005) Vandalism: A product of environmental design? Journal of Financial Management of Property and Construction, 10(3), pp. 181-191. ISSN 1366-4387

Herrera, R F; Mourgues, C; Alarcón, L F and Pellicer, E (2021) Analyzing the association between lean design management practices and BIM uses in the design of construction projects. Journal of Construction Engineering and Management, 147(4): 04021010, ISSN 0733-9364

Hinze, J and Wilson, G (2000) Moving toward a zero injury objective. Journal of Construction Engineering and Management, 126(5), pp. 399-403. ISSN 0733-9364

Ho, P (2012) Comparison of the grey model and the box jenkins model in forecasting manpower in the UK construction industry. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Ho, P H K (2010) Forecasting construction manpower demand by gray model. Journal of Construction Engineering and Management, 136(12), pp. 1299-1305. ISSN 0733-9364

Hogan, D B (1998) Modeling construction cost performance: A comprehensive approach using statistical, artificial neural network and simulation methods. PhD thesis, Columbia University, USA.

Holland, N and Hinze, J (2000) Daylight savings time changes and construction accidents. Journal of Construction Engineering and Management, 126(5), pp. 404-406. ISSN 0733-9364

Holt, G D; Akintoye, A and Davis, P T (2015) Editorial: Analysis of papers published in the journal of financial management of property and construction 2010-2015. Journal of Financial Management of Property and Construction, 20(2), pp. 106-115. ISSN 1366-4387

Howarth, T; Stoneman, G and Hill, C (2000) A review of the construction (design and management) regulations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Hsu, D (2014) Improving energy benchmarking with self-reported data. Building Research & Information, 42(5), pp. 641-656. ISSN 0961-3218

Hua, G B (2009) Construction and economic development of four most competitive economies in the world: A comparison. International Journal of Construction Education and Research, 5(4), pp. 261-275. ISSN 1557-8771

Huni, Tendai (2025) Social power configurations influencing relationship strength and supplier performance in the construction industry. PhD thesis, Vaal University of Technology, South Africa.

Husam, S; Laishram, B and Johari, S (2024) Framework to enhance gender inclusion of workers in construction sites. Journal of Construction Engineering and Management, 150(4): 04024018, ISSN 0733-9364

Hussain, A.; Che Ibrahim, C. K. I.; Belayutham, S.; Manu, P. and Cheung, C. (2026) Exploring regulatory capabilities for design for safety in construction: The case of Malaysia. Built Environment Project and Asset Management, 16(2), pp. 221-241. ISSN 2044-124X

Huuhka, S and Saarimaa, S (2018) Adaptability of mass housing: Size modification of flats as a response to segregation. International Journal of Building Pathology and Adaptation, 36(4), pp. 408-426. ISSN 23984708

Hyatt, B A (2023) Construction data leaders’ descriptions of their organization’s analytics maturity. DBA thesis, Grand Canyon University, USA.

Ibbs, W and Liu, M (2005) Improved measured mile analysis technique. Journal of Construction Engineering and Management, 131(12), pp. 1249-1256. ISSN 0733-9364

Ibem, E O; Aduwo, E B; Afolabi, A O; Oluwunmi, A O; Tunji-Olayeni, P F; Ayo-Vaughan, E A and Uwakonye, U O (2021) Electronic (e-) procurement adoption and users’ experience in the Nigerian construction sector. International Journal of Construction Education and Research, 17(3), pp. 258-276. ISSN 1557-8771

Ibem, E O; Aduwo, E B; Tunji-Olayeni, P; Ayo-Vaughan, E A and Uwakonye, U O (2016) Factors influencing e-procurement adoption in the Nigerian building industry. Construction Economics and Building, 16(4), pp. 54-67. ISSN 2204-9029

Ibem, E O; Anosike, M N; Azuh, D E and Mosaku, T O (2011) Work stress among professionals in the building construction industry in Nigeria. Construction Economics and Building, 11(3), pp. 46-57. ISSN 2204-9029

Ibem, E O and Laryea, S (2017) E-tendering in the South African construction industry. International Journal of Construction Management, 17(4), pp. 310-328. ISSN 1562-3599

Ibrahim, K; Okanlawon, T T; Oyewobi, L O; Badamasi, A; Dodo, M and Jimoh, R A (2026) Construction 4.0: Enhancing sustainable construction practices by evaluating digital twin barriers in the Nigerian AEC industry. Engineering, Construction and Architectural Management, 33(1), pp. 258-283. ISSN 0969-9988

Ibrahim, K; Agidani, J; Emmanuel Oke, A; Ikuabe, M and Kajimo Shakantu, K (2025) Assessing work-life balance strategies employed by Nigerian Builders. International Journal of Construction Management, 25(8), pp. 887-898. ISSN 1562-3599

Ibrahim, K; Simpeh, F and Adebowale, O J (2025) Benefits and challenges of wearable safety devices in the construction sector. Smart and Sustainable Built Environment, 14(1), pp. 50-71. ISSN 2046-6099

Ibrahimkhil, M H and Hadidi, L (2023) Is the construction site a safer place under the usace or local government guidelines? The case of Afghanistan. Engineering, Construction and Architectural Management, 30(4), pp. 1379-1400. ISSN 0969-9988

Idoro, G (2009) Evaluating levels of project planning and their effects on performance in the Nigerian construction industry. Construction Economics and Building, 9(2), pp. 39-50. ISSN 2204-9029

Ijasan, K and Ahmed, V (2010) The participatory roles of black and minority ethnic (BME) in community regeneration. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ikediashi, D and Aigbavboa, C (2019) Outsourcing as a strategy for facilities management provision in Nigerian universities. International Journal of Construction Management, 19(4), pp. 281-290. ISSN 1562-3599

Ikediashi, D I; Ansa, O A; Ujene, A O and Akoh, S R (2025) Barriers to BIM for facilities management adoption in Nigeria: A multivariate analysis. International Journal of Building Pathology and Adaptation, 43(3), pp. 391-413. ISSN 2398-4708

Ikediashi, D I and Ogunlana, S O (2015) Significant risk factors associated with facilities management outsourcing: A study on Nigeria's public hospitals. Engineering, Construction and Architectural Management, 22(6), pp. 771-796. ISSN 0969-9988

Ikediashi, D I and Ogwueleka, A C (2016) Assessing the use of ICT systems and their impact on construction project performance in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(2), pp. 252-276.

Ikediashi, D I and Okolie, K C (2022) An assessment of risks associated with contractor's cash flow projections in South-South, Nigeria. International Journal of Construction Management, 22(11), pp. 2051-2058. ISSN 1562-3599

Ikpe, E O (2009) Development of cost benefit analysis model of accident prevention on construction projects. PhD thesis, University of Wolverhampton, UK.

Ikuabe, M; Clinton, C; Ebekozien, A and Mambane, S (2025) Contextualising the challenges of the built environment programme accreditation in HEIs in South Africa. International Journal of Building Pathology and Adaptation, 43(8), pp. 108-123. ISSN 2398-4708

Ikuabe, M; Aigbavboa, C; Thwala, W; Chiyangwa, D and Oke, A (2023) Risks of joint venture formation in the South African construction industry. International Journal of Construction Management, 23(14), pp. 2391-2399. ISSN 1562-3599

Ikuabe, M O; Aigbavboa, C O; Thwala, W D; Chiyangwa, D and Oke, A E (2024) Critical factors influencing the failure of joint ventures in the South African construction industry: A confirmatory factor analysis approach. Engineering, Construction and Architectural Management, 31(4), pp. 1678-1695. ISSN 0969-9988

Ilter, A T (2011) Evaluation of contracting firms' innovation approaches. PhD thesis, Istanbul Technical University, Turkey.

Inyang, N; Al-Hussein, M; El-Rich, M and Al-Jibouri, S (2012) Ergonomic analysis and the need for its integration for planning and assessing construction tasks. Journal of Construction Engineering and Management, 138(12), pp. 1370-1376. ISSN 0733-9364

Irizarry, J and Abraham, D M (2006) Assessment of risk perception of ironworkers. Journal of Construction Research, 7(1), pp. 111-132. ISSN 1609-9451

Iroroakpo, G I (2007) A comparative study of direct labour and design-tender-construct procurement systems in Nigeria. PhD thesis, University of Lagos, Nigeria.

Ishaak, F F (2025) Improving commercial property price statistics. PhD thesis, Delft University of Technology, Netherlands.

Isiofia, L A; Nna, E; Uzuegbunam, F O and Ibem, E O (2024) The association of physical development density, prevalence and types of microbes in colonized façade finishes in enugu metropolis, Nigeria. International Journal of Building Pathology and Adaptation, 42(6), pp. 1147-1168. ISSN 2398-4708

Ismail, S; Musawa, M S and Ahmad, H (2019) Transparency of public private partnership (PPP): The extent of mandatory information disclosure. Built Environment Project and Asset Management, 9(5), pp. 655-668. ISSN 2044-124X

Israel, B (2023) The impact of clients' procurement challenges on the substance goals of roads construction projects in songwe, Tanzania. International Journal of Construction Management, 23(12), pp. 2144-2150. ISSN 1562-3599

Iyiola, C O and Mewomo, M C (2024) An empirical survey of critical factors influencing students' electricity use behaviour in halls of residence. Journal of Engineering, Design and Technology, 22(1), pp. 257-280. ISSN 1726-0531

Izzudin Mohd Ali, M Y (1994) Critical investigation of joint ventures by UK contractors with other European partners. PhD thesis, Loughborough University, UK.

Jackson, E N and Shanmuga Priya, T (2025) Identifying critical risk management performance indicators for construction projects in Ghana using confirmatory factor analysis. Construction Economics and Building, 25(3-4), pp. 22-42. ISSN 2204-9029

Jaeger, M and Adair, D (2013) Organisational culture of construction project managers in the GCC countries. Engineering, Construction and Architectural Management, 20(5), pp. 461-473. ISSN 0969-9988

Jaeger, M; Yu, G and Adair, D (2017) Organisational culture of Chinese construction organisations in Kuwait. Engineering, Construction and Architectural Management, 24(6), pp. 1051-1066. ISSN 0969-9988

Jagafa, K (2016) A framework for construction business recovery in small and medium sized privately owned companies. PhD thesis, University of Salford, UK.

Jannadi, M O (1997) An effective safety programme for a concrete product manufacturing plant. Building Research & Information, 25(2), pp. 92-100. ISSN 0961-3218

Jaya, N M (2014) An activity-based cost controlling model for improving the management of construction project overheads. PhD thesis, University of Salford, UK.

Jayasuriya, Sajani (2018) A systematic stakeholder management framework for managing public private partnership projects in Australia. PhD thesis, RMIT University, Australia.

Jeary, A P and Jeary, I P M (2001) The influence of flooding risk on infrastructure development in Western sydney. Construction Economics and Building, 1(2), pp. 57-64. ISSN 2204-9029

Jegard, L; Castaño-Rosa, R; Kilpeläinen, S and Pelsmakers, S (2024) Finnish glazed balconies: Residents’ experience, wellbeing and use. Buildings & Cities, 5(1), pp. 540-561. ISSN 2632-6655

Jewell, C and Flanagan, R (2012) Measuring construction professional services exports: A case for change. Building Research & Information, 40(3), pp. 337-347. ISSN 0961-3218

Jewell, C; Flanagan, R and Anac, C (2010) Understanding UK construction professional services exports: Definitions and characteristics. Construction Management and Economics, 28(3), pp. 231-239. ISSN 1466433X

Jiang, H and Payne, S (2022) Examining regime complexity in China's green housing transition: A housing developers' perspective. Building Research & Information, 50(3), pp. 291-307. ISSN 0961-3218

Jin, R; Zuo, J and Hong, J (2019) Scientometric review of articles published in ASCE's journal of construction engineering and management from 2000 to 2018. Journal of Construction Engineering and Management, 145(8): 06019001, ISSN 0733-9364

Jin, X H; Senaratne, S; Fu, Y and Tijani, B (2024) Tackling stress of project management practitioners in the Australian construction industry: the causes, effects and alleviation. Engineering, Construction and Architectural Management, 31(10), pp. 4016-4041. ISSN 0969-9988

Johnson, A; Rotimi, J O B and Wilkinson, S (2021) An evaluation of risk factors impacting project budget performance in New Zealand. Journal of Engineering, Design and Technology, 19(1), pp. 41-61. ISSN 1726-0531

Johnson, C; Lizarralde, G and Davidson, C H (2006) A systems view of temporary housing projects in post-disaster reconstruction. Construction Management and Economics, 24(4), pp. 367-378. ISSN 01446193

Johnson, G L (2020) An examination of the effect of capital structure on financial performance among construction firms in Romania 2010-2016. PhD thesis, Capella University, USA.

Jones, M M (2024) Exploring accessibility, usability, and relevance: A case study of Wyoming's construction workforce training program. PhD thesis, University of Wyoming, USA.

Joseph Oladiran, O and Rogers Simeon, D (2023) Consciousness and prospects of autoclaved aerated concrete (aac) blocks for wall construction: Comparative study Nigeria and South Africa. Journal of Construction Business and Management, 6(2), pp. 1-10. ISSN 2521-0165

Kabundu, E K (2020) A housing affordability and tenure of choice quantum deliverable model in South Africa. PhD thesis, Nelson Mandela Metropolitan University, South Africa.

Kaiser, M J; Pulsipher, A G and Byrd, R C (2005) Cost of abrasive cutting in decommissioning operations in the gulf of Mexico. Journal of Construction Engineering and Management, 131(1), pp. 137-148. ISSN 0733-9364

Kaiser, M J; Pulsipher, A G and Martin, J (2005) Cost of site clearance and verification operations in the gulf of Mexico. Journal of Construction Engineering and Management, 131(1), pp. 117-126. ISSN 0733-9364

Kalil, A J (2002) Use of a work sampling method (TVEA) to characterize determinants of particulate exposure in heavy and highway construction. DSc thesis, University of Massachusetts Lowell, USA.

Kaplinski, O (1993) Diminishing non-uniformity of construction processes. Construction Management and Economics, 11(1), pp. 53-61. ISSN 01446193

Karadimitriou, N (2007) Re-use of previously developed land: housebuilder adaptation to a changing context. PhD thesis, University College London, UK.

Karambakuwa, N (2024) The performance of small construction firms in South Africa under the cost leadership strategy. PhD thesis, Nelson Mandela University, South Africa.

Kavanagh, D P (1985) SIREN: A repetitive construction simulation model. Journal of Construction Engineering and Management, 111(3), pp. 308-323. ISSN 0733-9364

Kavishe, N and Chileshe, N (2020) Factors influencing bid/no bid decision of foreign contractors in Tanzania. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Kavishe, N; Chileshe, N and Jefferson, I (2019) Public-private partnerships in Tanzanian affordable housing schemes: Policy and regulatory issues, pitfalls and solutions. Built Environment Project and Asset Management, 9(2), pp. 233-247. ISSN 2044-124X

Kavishe, N; Jefferson, I and Chileshe, N (2018) An analysis of the delivery challenges influencing public-private partnership in housing projects: The case of Tanzania. Engineering, Construction and Architectural Management, 25(2), pp. 202-240. ISSN 0969-9988

Kavishe, N; Sunday, N; Magembe-Mushi, D L and Opoku, A (2022) Challenges confronting environmental impact assessment practices in Tanzania: Construction industry professionals' perspective. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Kazan, E E (2013) Analysis of fatal and nonfatal accidents involving earthmoving equipment operators and on-foot workers. PhD thesis, Wayne State University, USA.

Kazaz, A; Ulubeyli, S and Arslan, A (2020) Quantification of fresh ready-mix concrete waste: Order and truck-mixer based planning coefficients. International Journal of Construction Management, 20(1), pp. 53-64. ISSN 1562-3599

Kermanshachi, S (2016) Decision making and uncertainty analysis in success of construction projects. PhD thesis, Texas A&M University, USA.

Khaemba, P (2013) Adoption of green building practices and rating system in Kenya: Potentials and barriers. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Khalid, U (2022) Investigation into the development of a human reliability analysis framework for the safety management of construction projects. PhD thesis, Nottingham Trent University, UK.

Khamaksorn, A (2019) Knowledge transfer processes in international construction joint venture projects in Thailand. PhD thesis, Oxford Brookes University, UK.

Khatatbeh, A A (2023) Quantifying the impact of ISO 9001 standard on the project and engineering management and success factors; a case of construction industry. Engineering, Construction and Architectural Management, 30(6), pp. 2564-2581. ISSN 0969-9988

Kheni, N A; Dainty, A R J and Gibb, A G F (2007) Influence of political and socio-cultural environments on health and safety management within SMEs: A Ghana case study. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Khoza, R B M (2021) Performance measurements on concession periods to forecast water infrastructure investment returns. PhD thesis, Walden University, USA.

Kikwasi, G (2016) Risk handling options: Is insurance a fair option to transfer construction risks in Tanzanian construction industry? In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Kikwasi, G J; Sospeter, N G and Rwelamila, P D (2023) Critical success factors for adopting supply chain management in Tanzanian construction projects. Journal of Construction in Developing Countries, 28(1), pp. 43-61. ISSN 1823-6499

Killingsworth, J and Mehany, M H (2018) Implications of collection period variance in the construction industry. Journal of Financial Management of Property and Construction, 23(3), pp. 330-348. ISSN 1366-4387

Kim, H (2002) Knowledge discovery and machine learning in construction project databases. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kim, J (2007) An investigation of activity duration input modeling by duration variance ratio for simulation-based construction scheduling. PhD thesis, Rutgers The State University of New Jersey - New Brunswick, USA.

Kim, J J; Miller, J A and Kim, S (2020) Cost impacts of change orders due to unforeseen existing conditions in building renovation projects. Journal of Construction Engineering and Management, 146(8): 04020094, ISSN 0733-9364

Kim, K; Jeong, I and Cho, Y K (2023) Signal processing and alert logic evaluation for IoT-based work zone proximity safety system. Journal of Construction Engineering and Management, 149(2): 05022018, ISSN 0733-9364

Kim, S (1990) Development of risk assessment decision support system for hazardous materials movement. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Kima, O.; Urlainis, A.; Wang, K. C. and Shohet, I. M. (2026) Safety climate in small and medium construction enterprises. Smart and Sustainable Built Environment, 15(2), pp. 508-532. ISSN 2046-6099

King-Lewis, A (2020) Diversity and inclusion of women in the construction industry. PhD thesis, Oklahoma State University, USA.

Kirby, M; Rotimi, F E and Naismith, N (2025) Factors for improving productivity in the New Zealand residential construction sector. Journal of Engineering, Design and Technology, 23(5), pp. 1712-1728. ISSN 1726-0531

Kishk, M; Al-Hajj, A and Pollock, R (2001) Inclusion of non-financial factors in life-cycle decision-making: A fuzzy approach. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Kissi, E; Aigbavboa, C and Kuoribo, E (2023) Emerging technologies in the construction industry: Challenges and strategies in Ghana. Construction Innovation, 23(2), pp. 383-405. ISSN 1471-4175

Kodikara Edirisinghe, R. and Gunathilake, L. (2026) An IoT-based heat stress management system for the construction industry. Engineering, Construction and Architectural Management, 33(3), pp. 2200-2219. ISSN 0969-9988

Koirala, M P; Thapa, N; Giri, O P and Sha, R K (2025) Evaluation of variation orders on road construction projects in rural Nepal. Construction Economics and Building, 25(3-4), pp. 311-338. ISSN 2204-9029

Kulatunga, U (2008) Influence of performance measurement towards construction research and development. PhD thesis, University of Salford, UK.

Kum, Y T; Yap, J B H; Lew, Y L and Lee, W P (2024) COVID-19 health and safety challenges on construction sites: Unfolding novel dimensions for construction industries in developing countries. International Journal of Construction Management, 24(2), pp. 187-198. ISSN 1562-3599

Kumar, A; Khare, R; Sankat, S and Madhavi, P (2023) Fire safety assessment for older adults in high-rise residential buildings in India: A comprehensive study. International Journal of Building Pathology and Adaptation, 41(3), pp. 625-646. ISSN 23984708

Kuoribo, E; Yomoah, R; Owusu-Manu, D G; Acheampong, A; John Edwards, D and Debrah, C (2023) Assessing the interactive effects of the ethics of construction professionals on project performance in the Ghanaian construction industry. Engineering, Construction and Architectural Management, 30(10), pp. 5233-5252. ISSN 0969-9988

Kurvinen, A; Huovari, J; Lahtinen, M; Sen, T and Saari, A (2024) A dynamic model for estimating the long-term need for repairs and renovations in residential buildings. Building Research & Information, 52(5), pp. 533-550. ISSN 0961-3218

Kurwi, S (2019) Integrating BIM and GIS for design collaboration in railway projects. PhD thesis, Loughborough University, UK.

Kıran Çakır, H; Aydın, D and Arabulan, S (2020) Adaptive reuse of open spaces in historical buildings. International Journal of Building Pathology and Adaptation, 38(5), pp. 703-719. ISSN 23984708

Laepple, E S (2005) Exploring project collaboration systems in the building industry. PhD thesis, Texas A&M University, USA.

Lahdenperä, P (2001) An analysis of the statistics on project procurement methods in Finland, 1989-1998. Journal of Construction Procurement, 7(1), pp. 27-41. ISSN 1358-9180

Lam, S-W (2001) Construction safety education in Hong Kong. PhD thesis, International University of Fundamental Studies, Russia.

Larsson, R (2021) Modelling and simulation of factors influencing on-site construction of concrete frameworks: Studying the effects of resource allocation, weather conditions, and climate-improved concrete. PhD thesis, Lund University, Sweden.

Le, P T; Chileshe, N; Kirytopoulos, K and Rameezdeen, R (2020) Investigating the significance of risks in BOT transportation projects in Vietnam. Engineering, Construction and Architectural Management, 27(6), pp. 1401-1425. ISSN 0969-9988

Lee, C. L.; Vechpanich, P.; Lin, J. and J. Wilkinson, S. (2026) Public perceptions and adoption pathways of earthship homes in Australia. Smart and Sustainable Built Environment, pp. 1-33. ISSN 2046-6099

Lee, D E and Arditi, D (2006) Automated statistical analysis in stochastic project scheduling simulation. Journal of Construction Engineering and Management, 132(3), pp. 268-277. ISSN 0733-9364

Lee, F-P B (2009) Factors affecting the profitability of construction companies in Hong Kong. PhD thesis, University of Hong Kong, Hong Kong.

Lee, S (2001) Simulation analysis of productivity variation affected by accident risk in underground construction operations. PhD thesis, Purdue University, USA.

Lee, Z P; Rahman, R A and Doh, S I (2021) Key drivers for adopting design-build in public construction projects: Malaysian perspective. Journal of Construction in Developing Countries, 26(1), pp. 131-160. ISSN 1823-6499

Leu, S S; Huang, K J; Hung, C C W and Wu, P L (2024) Revolutionizing steel building project cost overrun risk assessment by Bayesian network. Engineering, Construction and Architectural Management, 31(12), pp. 4975-4987. ISSN 0969-9988

Leu, S S and Lin, Y C (2008) Project performance evaluation based on statistical process control techniques. Journal of Construction Engineering and Management, 134(10), pp. 813-819. ISSN 0733-9364

Lewis, T M and Hosein, R (2006) An estimation of the size of the hidden labour force in construction in Trinidad and Tobago. Construction Management and Economics, 24(8), pp. 805-815. ISSN 1466433X

Ley, J D (2004) An environmental and material flow analysis of the UK steel construction sector. EngD thesis, Cardiff University, UK.

Li, L; Chen, C; Martek, I and Li, G (2024) An integrated model for international market and entry mode selections for Chinese contractors. Engineering, Construction and Architectural Management, 31(6), pp. 2457-2477. ISSN 0969-9988

Li, W (1995) Benefit and cost analysis: Three-dimensional computer models with integrated databases in the management of construction. PhD thesis, Columbia University, USA.

Li, W X (2015) A performance management methodology for collaborative design and construction project teams. PhD thesis, Stanford University, USA.

Lichtenstein, S; Badu, E; Owusu-Manu, D G; Edwards, D J and Holt, G D (2013) Corporate social responsibility architecture and project alignments: A study of the Ghanaian construction industry. Journal of Engineering, Design and Technology, 11(3), pp. 334-353. ISSN 1726-0531

Lim, J N and Peltner, F (2011) Innovation performance of construction enterprises: An empirical assessment of the German and Singapore construction enterprises. Construction Innovation, 11(3), pp. 282-304. ISSN 1471-4175

Lim, M L W; Wong, S Y and Ding, C S (2024) Challenges of industrial revolution 4.0: Quantity surveying students' perspectives. Engineering, Construction and Architectural Management, 31(6), pp. 2496-2512. ISSN 0969-9988

Ling, F Y Y (1999) Multi-attribute decision making model for evaluation and selection of consultants for design-and-build projects in Singapore. PhD thesis, National University of Singapore, Singapore.

Liu, L-Y (1991) Coops: Construction object-oriented process simulation system. PhD thesis, University of Michigan, USA.

Liu, Z (2014) Building information modelling (BIM) aided waste minimisation framework. PhD thesis, Loughborough University, UK.

Liu, Z; Lu, Y; Nath, T; Wang, Q; Tiong, R L K and Peh, L L C (2022) Critical success factors for BIM adoption during construction phase: A Singapore case study. Engineering, Construction and Architectural Management, 29(9), pp. 3267-3287. ISSN 0969-9988

Lochau-Emden, G H (1983) A manufacturers' exchange as a source of information for strategic management and an economic stabilising aid in the building and construction sector: A theoretical and empirical study. DBA thesis, University of Pretoria, South Africa.

Lombard, P C (1991) The relationship between highway infrastructure and regional economic development. PhD thesis, Purdue University, USA.

Lopes, J P; Oliveira, R A and Abreu, M I (2019) Estimating the built environment stock in Cape Verde. Engineering, Construction and Architectural Management, 26(5), pp. 814-826. ISSN 0969-9988

Loudoun, R J (2010) Injuries sustained by young males in construction during day and night work. Construction Management and Economics, 28(12), pp. 1313-1320. ISSN 1466433X

Lowe, J (1997) Labour productivity trends for the UK construction sector. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Lowe, J G (1990) The fixed capital stock in use by the UK construction industry. Construction Management and Economics, 8(1), pp. 63-75. ISSN 01446193

Lu, M (2002) Enhancing project evaluation and review technique simulation through artificial neural network-based input modeling. Journal of Construction Engineering and Management, 128(5), pp. 438-445. ISSN 0733-9364

Lu, W; Webster, C; Peng, Y; Chen, X and Zhang, X (2017) Estimating and calibrating the amount of building-related construction and demolition waste in urban China. International Journal of Construction Management, 17(1), pp. 13-24. ISSN 1562-3599

Lu, Y and Zhang, J (2022) Bibliometric analysis and critical review of the research on big data in the construction industry. Engineering, Construction and Architectural Management, 29(9), pp. 3574-3592. ISSN 0969-9988

Lucko, G (2003) A statistical analysis and model of the residual value of different types of heavy construction equipment. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Luo, H (2021) Automated construction machine pose monitoring using computer vision and deep learning for construction site safety. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Luvara, V G M and Benjamin, M (2025) Unveiling factors influencing the duration of arbitration practice in the Tanzania construction industry. International Journal of Building Pathology and Adaptation, 43(6), pp. 1612-1633. ISSN 2398-4708

Maaith, N. and Sharmin, T. (2026) Socio-technical drivers of energy use in low-income housing in Jordan: Insights from a regression-based study. Building Research & Information, 54(4), pp. 510-533. ISSN 0961-3218

Magdub, R H (2006) Application of the lump sum turnkey contracts in Libyan civil law with reference to English law and international practice. PhD thesis, Glasgow Caledonian University, UK.

Maguire, K J P (2008) Risk, culture, and organization: a study of injury among construction workers. PhD thesis, University of Salford, UK.

Makoye, M; Mlinga, R S and Ndanshau, M O A (2023) Impact of macroeconomic factors on performance of construction industry in Tanzania. International Journal of Construction Management, 23(15), pp. 2625-2636. ISSN 1562-3599

Malcomb, A P (2022) New universal law: Application of Tracy-Widom theory for construction network schedule resilience. PhD thesis, Catholic University of America, USA.

Manase, D (2008) An exploratory study of GIS based analysis of health and safety related information. PhD thesis, University of Wolverhampton, UK.

Mango, T (2014) The impact of real estate construction and holding companies: A case study of Beirut's Solidere and Amman's Abdali. PhD thesis, University of Exeter, UK.

Manley, K (2006) The innovation competence of repeat public sector clients in the Australian construction industry. Construction Management and Economics, 24(12), pp. 1295-1304. ISSN 1466433X

Manu, P; Mahamadu, A M; Booth, C; Olomolaiye, P; Ibrahim, A D and Coker, A (2018) Assessment of procurement capacity challenges inhibiting public infrastructure procurement: A Nigerian inquiry. Built Environment Project and Asset Management, 8(4), pp. 386-402. ISSN 2044-124X

Marchi, L; Susca, T; Benedetti, M; Antonini, E and Gaspari, J (2025) From waste to thermal insulation for buildings: An investigation of potentialities in the Italian context. Building Research & Information, 53(6), pp. 777-796. ISSN 0961-3218

Marinelli, M and Salopek, M (2020) Joint risk management and collaborative ethos: Exploratory research in the UK construction sector. Journal of Engineering, Design and Technology, 18(2), pp. 343-361. ISSN 1726-0531

Martins, R S; Siqueira de Aquino, G; Coelho Pagel, É and Gouveia, G L O D (2025) Realistic designs of windows and doors as solutions to improve natural ventilation in hot-humid climates: A factorial design approach. Architectural Engineering and Design Management, 21(2), pp. 268-288. ISSN 1745-2007

Marwah, H (2011) Investing in ghosts: Building and construction in Nigeria's oil boom and bust c1960-2000. PhD thesis, University of Oxford, UK.

Marzouk, M and Amin, A (2013) Predicting construction materials prices using fuzzy logic and neural networks. Journal of Construction Engineering and Management, 139(9), pp. 1190-1198. ISSN 0733-9364

Mathur, Sandeep (2024) Managing data science initiatives as exploratory projects : A new approach to program management. PhD thesis, University of Technology Sydney, Australia.

Mavrogianni, A; Davies, M; Chalabi, Z; Wilkinson, P; Kolokotroni, M and Milner, J (2009) Space heating demand and heatwave vulnerability: London domestic stock. Building Research & Information, 37(5-6), pp. 583-597. ISSN 0961-3218

McCaffer, R (1976) Contractors' bidding behaviour and tender price prediction. PhD thesis, Loughborough University, UK.

McCahill, D F (1990) A practical model for simulation of earthwork construction, with applications for scheduling. PhD thesis, University of Maryland, College Park, USA.

McCahill, D F and Bernold, L E (1993) Resource-oriented modeling and simulation in construction. Journal of Construction Engineering and Management, 119(3), pp. 590-606. ISSN 0733-9364

Melzner, J; Zhang, S; Teizer, J and Bargstädt, H J (2013) A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), pp. 661-674. ISSN 1466433X

Messi, Leonardo (2022) Development of a BIM-based simulator for workspace management in construction. PhD thesis, Università Politecnica delle Marche, Italy.

Michael Gbolagade, O; Inimbom Walter, I and Emuze, F (2021) Towards sustainability practices deployment in building construction projects in Nigeria. Smart and Sustainable Built Environment, 10(4), pp. 759-780. ISSN 2046-6099

Mills, A; Harris, D and Skitmore, M (2003) The accuracy of housing forecasting in Australia. Engineering, Construction and Architectural Management, 10(4), pp. 245-253. ISSN 0969-9988

Mills, K M (2025) A qualitative descriptive study on job crafting. EdD thesis, Grand Canyon University, USA.

Minh, Huynh Quang (2016) Developing skilled labour: An analysis of the major factors which enable and hinder employee training in construction companies in Vietnam. DBA thesis, Western Sydney University, Australia.

Mireku, E. K.; Kissi, E.; Ikuabe, M.; Arkoh-Clayman, E. and Musah, L. (2026) Encumbrances of integrating sustainability concepts and practices in rural community buildings: Empirical evidence from Ghana. International Journal of Building Pathology and Adaptation, 44(5), pp. 1232-1245. ISSN 2398-4708

Mock, B and O'Connor, J (2022) Taxonomic categories for commissioning and startup hot spot strategies. Construction Innovation, 22(1), pp. 120-140. ISSN 1471-4175

Mohd Zin, I N (2014) Knowledge sharing approaches in Malaysian construction organisations for improved performance. PhD thesis, University of Salford, UK.

Mohjah Mohammed, A; Al-Naim, M and El-Wakeel, H (2024) Developing a tool to assess the performance of educational built environments for students with multiple sclerosis. Architectural Engineering and Design Management, 20(3), pp. 494-509. ISSN 1745-2007

Mohsenijam, Arash (2019) Advancing regression based analytics for steel fabrication productivity modeling. PhD thesis, University of Alberta, Canada.

Mojela, T. W.; Laryea, S.; Zungu, Z. and Kwasafo, O. K. (2026) Client and contractor experiences in framework construction agreements in South Africa. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 179(2), pp. 154-168. ISSN 1751-4304

Molaei, P; Hashempour, P and Tang, L M (2022) Semi-open spaces of apartments considering COVID-19 pandemic: General expectations of balcony design in the post-pandemic world. Architectural Engineering and Design Management, 18(5), pp. 705-722. ISSN 1745-2007

Molenaar, K R; Park, J I and Washington, S (2009) Framework for measuring corporate safety culture and its impact on construction safety performance. Journal of Construction Engineering and Management, 135(6), pp. 488-496. ISSN 0733-9364

Mollo, L G; Emuze, F and Smallwood, J (2023) A proposed training-within-industry-informed human failure reduction framework for South African construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(3), pp. 104-112. ISSN 17514304

Momade, M H; Durdyev, S; Van Tam, N; Shahid, S; Mbachu, J and Momade, Y (2024) Factors influencing adoption of construction technologies in Vietnam's residential construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1002-1018. ISSN 2398-4708

Montalbán-Domingo, L; Torres-Machi, C; Sanz-Benlloch, A; Pellicer, E and Molenaar, K R (2023) Green public procurement in civil infrastructure construction: Current performance and main project characteristics. Journal of Construction Engineering and Management, 149(9): 04023089, ISSN 0733-9364

Monteiro, Nathalie da Silva Cavalcanti (2019) Analysis of the strategic management of civil construction companies in curitiba and the metropolitan region in light of the perception of change in the economic scenario. PhD thesis, Universidade Tecnológica Federal do Paraná, Brazil.

Moselhi, O and Khan, Z (2012) Significance ranking of parameters impacting construction labour productivity. Construction Innovation, 12(3), pp. 272-296. ISSN 1471-4175

Moskowitz, J M and McCranie, J B (2026) Investigating the impact of army safety and occupational health management system implementation on safety performance indices: Case study of a U.S. Army corps of engineers district. International Journal of Construction Management, 26(5), pp. 840-856. ISSN 1562-3599

Mostavi, E (2018) Development of multiple criteria decision making instrument in designing of high performance commercial buildings. PhD thesis, Pennsylvania State University, USA.

Moyanga, Dorcas Titilayo; Ojo, Lekan Damilola and Ogunsemi, Deji Rufus (2026) Prioritizing strategies for surviving economic turbulence: Case of quantity surveying consultancy organizations in Nigeria. Journal of Construction Business and Management, 8(2), pp. 15-27. ISSN 2521-0165

Moyo, T and Chigara, B (2023) Expected competencies of construction project managers in Zimbabwe. Journal of Engineering, Design and Technology, 21(3), pp. 711-732. ISSN 1726-0531

Mselle, J and Sanga, S A (2018) Constraints facing incremental housing construction in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 23(1), pp. 1-20. ISSN 1823-6499

Mukoki, P S (2022) Infrastructure financing and bond markets development in Sub-Saharan Africa. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Munir, M (2020) Development of a building information modelling asset value realisation model. PhD thesis, University of Liverpool, UK.

Munir, Mustapha (2020) Development of a building information modelling asset (bimasset) value realisation model. PhD thesis, University of Liverpool, UK.

Musa, M M; Saleh, I M; Ibrahim, Y and Dandajeh, M A (2023) Assessment of awareness and barriers to the application of lean construction techniques in kano state, Nigeria. Journal of Construction Business and Management, 6(1), pp. 33-42. ISSN 2521-0165

Musonda, I (2012) Construction health and safety (H&S) performance improvement: a client-centred model. PhD thesis, University of Johannesburg, South Africa.

Mustapha, Z (2017) An integrated health and safety compliance model for the Ghanaian construction industry. PhD thesis, University of Johannesburg, South Africa.

Mutai, A (2009) Factors influencing the use of building information modeling (BIM) within leading construction firms in the United States of America. PhD thesis, Indiana State University, USA.

Mwanaumo, E M (2013) An integrated approach to multi-stakeholder interventions in construction health and safety. DPhil thesis, University of Johannesburg, South Africa.

Mwanaumo, E M and Mambwe, M (2019) Effect of management strategies in entrenching organisational safety culture in the electricity industry of Zambia. Journal of Construction Business and Management, 3(1), pp. 27-37. ISSN 2521-0165

Mwemezi, B R; Kikwasi, G J and Phoya, S (2024) Perception of masonry workers on health and safety risks in informal construction sites in Dar es Salaam, Tanzania. International Journal of Construction Management, 24(12), pp. 1305-1313. ISSN 1562-3599

Nadhim, E A; Hon, C; Xia, B; Stewart, I and Fang, D (2018) Investigating the relationships between safety climate and safety performance indicators in retrofitting works. Construction Economics and Building, 18(2), pp. 110-129. ISSN 2204-9029

Najib, T (2005) Investigation of success factors for smaller engineering firms. PhD thesis, Wayne State University, USA.

Nasrallah, W F and Bou-Matar, R (2008) Exponential, gamma, and power law distributions in information flow on a construction site. Journal of Construction Engineering and Management, 134(6), pp. 442-450. ISSN 0733-9364

Neil, J M (1978) Construction cost estimating concepts and their application. PhD thesis, Texas A&M University, USA.

Nelson, T N T (2024) Using socio-technical water systems in construction engineering to address water insecurity after hurricanes maria and fiona. PhD thesis, Iowa State University, USA.

Ng, K-W A (2009) Improving main contractors' site coordination in the Hong Kong building projects. PhD thesis, Loughborough University, UK.

Ngamthampunpol, D (2008) An assessment of safety management in the Thai construction industry. DSc thesis, George Washington University, USA.

Nguyen, P H D; Lines, B C and Tran, D Q (2018) Best-value procurement in design-bid-build construction projects: Empirical analysis of selection outcomes. Journal of Construction Engineering and Management, 144(10): 04018093, ISSN 0733-9364

Nguyen, P H D; Tran, D Q and Bypaneni, S P K (2021) Exploring the impact of project size on design-bid-build and design-build project delivery performance in highways. Construction Management and Economics, 39(11), pp. 879-893. ISSN 01446193

Nguyen, T P and Chileshe, N (2015) Revisiting the construction project failure factors in Vietnam. Built Environment Project and Asset Management, 5(4), pp. 398-416. ISSN 2044-124X

Nguyen T P, C N (2013) Revisiting the critical factors causing failure of construction projects in Vietnam. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Nicholas, J; Holt, G D and Harris, P T (2000) An investigation into predicting materials suppliers' profits. Journal of Construction Procurement, 6(2), ISSN 1358-9180

Nkomo, M W (2020) Assessment of mentoring of construction workers in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Nnamani, O. C. and Ogbue, J. U. (2026) Assessing risk analysis and management practices of property development companies in Nigeria. Construction Economics and Building, 26(2): 380, ISSN 2204-9029

Nobe, M D (1996) Decision support for real estate development cost estimating. PhD thesis, Texas A&M University, USA.

Nwaogu, J M; Chan, A P C; Sunindijo, R Y; Darko, A; Yang, J Y and Salihu, D (2023) Prevalence and risk factors for poor mental health and suicidal ideation in the Nigerian construction industry. Journal of Construction Engineering and Management, 149(3): 05022021, ISSN 0733-9364

Nwaogu, J M; Chan, A P C and Tetteh, M O (2022) Staff resilience and coping behavior as protective factors for mental health among construction tradesmen. Journal of Engineering, Design and Technology, 20(3), pp. 671-695. ISSN 1726-0531

Nyakala, K S (2017) Developing a road construction quality assurance process measurement tool: The case of Mopani district municipality. DPhil thesis, University of Johannesburg, South Africa.

Nyakala, S; Pretorius, J and Vermeulen, A (2020) Construction quality process implementation as a source of competitive advantage in small and medium-sized construction projects. Journal of Construction Business and Management, 4(2), pp. 46-54. ISSN 2521-0165

Nyalungu, Jey; Mbona, Sizwe; Ogunsola, Sijuwade and Sibuyi, Venus (2026) The effectiveness of supply chain management in enhancing project management outcomes. Journal of Construction Business and Management, 8(2), pp. 54-64. ISSN 2521-0165

Nyamagere Gladys, S; Rwelamila, P D and Gimbi, J J (2022) A conceptual framework for managing post-disaster reconstruction projects in emerging economies: The case of Angola. Built Environment Project and Asset Management, 12(2), pp. 205-222. ISSN 2044-124X

Nyateka, N (2017) An evaluation of the role and effectiveness of simulation-based learning in the occupational health training of construction apprentices. PhD thesis, Loughborough University, UK.

O'Brien, J (2012) Exponential random graph models of social networks for engineering design firms. PhD thesis, University of Colorado at Boulder, USA.

O'Connor, J T and Mock, B (2020) Responsibilities and accountabilities for industrial facility commissioning and startup activities. Construction Innovation, 20(4), pp. 625-645. ISSN 1471-4175

Ochieng, J A and Chileshe, N (2016) Engagement strategies and challenges for adoption of stakeholder management approaches (SMA) in South Australian construction industry: Preliminary observations. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Odeyinka, H A; Davison, C and Olomolaiye, A (2005) An assessment of factors inhibiting designers from complying with health and safety regulations in their design. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Odimabo, O (2016) Risk management system to guide building construction projects in developing countries: a case study of Nigeria. PhD thesis, University of Wolverhampton, UK.

Odongo, N H and Motari, W O (2022) Consumers' perceptiveness towards store brands within supermarkets. International Journal of Construction Management, 22(13), pp. 2459-2468. ISSN 1562-3599

Offei, I; Kissi, E and Nani, G (2019) Factors affecting the capacity of small to medium enterprises building construction firms in Ghana. Journal of Construction in Developing Countries, 24(1), pp. 49-63. ISSN 1823-6499

Ofori, J N A; Tomori, M and Ogunseiju, O (2025) Assessing the ethical, social and psychological risks of active and passive exoskeletons in the construction industry: Trust, productivity and stress levels. Smart and Sustainable Built Environment, 14(4), pp. 1091-1116. ISSN 2046-6099

Ofori-Boadu, A N; Owusu-Manu, D G; Edwards, D J and Asiseh, F (2021) A conceptual model of subcontractor development practices for LEED projects. Engineering, Construction and Architectural Management, 28(4), pp. 1196-1213. ISSN 0969-9988

Ogbu, C P and Osazuwa, E M (2024) Barriers to the growth of indigenous construction firms in Nigeria. Engineering, Construction and Architectural Management, 31(12), pp. 5106-5127. ISSN 0969-9988

Ogwueleka, A C and Maritz, M J (2016) Modeling for incentive payoffs in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(3), pp. 543-562.

Ohland, M W (1996) Engineering by design: A methodology for designing creative engineering activities. PhD thesis, University of Florida, USA.

Ojo, L D; Chan, A P C and Sing, M C P (2026) Drivers of integrity-based approach to ethics management (ibaem) in the Nigerian construction organizations. International Journal of Construction Management, 26(3), pp. 396-411. ISSN 1562-3599

Ojo, L D and Ogunsemi, D R (2019) Critical drivers (CDs) of value management adoption in the Nigerian construction industry: A Delphi study. Journal of Engineering, Design and Technology, 17(1), pp. 250-264. ISSN 1726-0531

Ojo, L D; Ogunsemi, D R; Elyamany, A and Oke, A E (2025) Profound barriers to value management adoption on construction projects in a developing nation. Journal of Engineering, Design and Technology, 23(1), pp. 264-286. ISSN 1726-0531

Oke, A E; Aliu, J O; Tamunosa Ojurongbe, E; Aigbavboa, C O; Aghimien, D O and Ebekozien, A (2026) Investigation of core and future competencies needed for quantity surveyors in Nigeria. International Journal of Construction Education and Research, 22(1), pp. 119-137. ISSN 1557-8771

Oke, A E; Aliu, J; Ifedolapo Babalola, H; Jamir Singh, P S; Tunji-Olayeni, P and Ukaha Onyeukwu, S (2025) From building blocks to digital networks: Analyzing critical drivers for social media adoption in the construction sector. International Journal of Construction Management, 25(9), pp. 1047-1057. ISSN 1562-3599

Oke, A E and Arowoiya, V A (2022) An analysis of the application areas of augmented reality technology in the construction industry. Smart and Sustainable Built Environment, 11(4), pp. 1081-1098. ISSN 2046-6099

Oko, J A (2008) Ethical behaviour of Nigerian building industry professionals in the procurement of building projects. PhD thesis, University of Lagos, Nigeria.

Okorafor, C; Emuze, F; Das, D; Awuzie, B O and Haupt, T (2020) An artefact for improving the delivery of building energy retrofit project in South Africa. Built Environment Project and Asset Management, 10(4), pp. 619-635. ISSN 2044-124X

Okoyeh, I. I. and Ezezue, A. M. (2026) Assessment of noise levels in architectural design studios in universities in South-East Nigeria. International Journal of Building Pathology and Adaptation, 44(3), pp. 704-719. ISSN 2398-4708

Okunola, A; Akanmu, A A and Yusuf, A O (2025) Comparison of active and passive back-support exoskeletons for construction work: Range of motion, discomfort, usability, exertion and cognitive load assessments. Smart and Sustainable Built Environment, 14(3), pp. 582-598. ISSN 2046-6099

Okunola, O H and Bako, A I (2023) Exploring residential characteristics as determinants of household adaptation to climate change in Lagos, Nigeria. International Journal of Disaster Resilience in the Built Environment, 14(1), pp. 115-131. ISSN 1759-5916

Oladinrin, O T and Ojo, L D (2022) Characterisation of the drivers of environmental management system implementation. Engineering, Construction and Architectural Management, 29(10), pp. 3868-3892. ISSN 0969-9988

Oladiran, O J; Bayewun, A A and Aderogba, A M (2021) Awareness and usage of environmental waste management practices of contractors on construction sites. Journal of Construction Business and Management, 5(1), pp. 17-27. ISSN 2521-0165

Olanipekun, A O and Saka, N (2019) Response of the Nigerian construction sector to economic shocks. Construction Economics and Building, 19(2), pp. 160-180. ISSN 2204-9029

Olanrewaju, O I; Babarinde, S A; Chileshe, N and Sandanayake, M (2021) Drivers for implementation of building information modeling (BIM) within the Nigerian construction industry. Journal of Financial Management of Property and Construction, 26(3), pp. 366-386. ISSN 1366-4387

Olanrewaju, O I; Bello, A O; Semiu, M A and Mudashiru, S A (2025) Critical barriers to effective communication in the construction industry: evidence from Nigeria. International Journal of Construction Management, 25(7), pp. 783-801. ISSN 1562-3599

Olanrewaju, O I; Chileshe, N; Babarinde, S A and Sandanayake, M (2020) Investigating the barriers to building information modeling (BIM) implementation within the Nigerian construction industry. Engineering, Construction and Architectural Management, 27(10), pp. 2931-2958. ISSN 0969-9988

Olasunkanmi, F F O; Ikediashi, D I and Ajiero, I R (2024) Assessing the factors of transactional leadership style for construction projects: A case of Nigerian construction industry. Journal of Engineering, Design and Technology, 22(5), pp. 1637-1654. ISSN 1726-0531

Olatokun, E O (2017) Requirement elicitation using knowledge capturing techniques during the client briefing process for improved client satisfaction in the UK construction industry. PhD thesis, University of Salford, UK.

Olatokun, E O (2017) Requirement elicitation using knowledge capturing (kc) techniques during the client briefing process for improved client satisfaction in the UK construction industry. PhD thesis, University of Salford, UK.

Olayinka, R A (2015) A knowledge management framework for reducing the cost of poor quality on construction projects. PhD thesis, University of Wolverhampton, UK.

Olojede, B O; Opawole, A; Jagboro, G O and Alao, O O (2023) Examination of roles performed by public sector organizations in the procurement of public-private partnership projects. International Journal of Building Pathology and Adaptation, 41(2), pp. 495-511. ISSN 23984708

Oloke, D (2003) Development of a web-based off-highway plant information system. PhD thesis, University of Wolverhampton, UK.

Oloke, D A; Edwards, D J and Thorpe, T A (2003) Predicting construction plant breakdown time using time series modelling. Journal of Engineering, Design and Technology, 1(2), pp. 202-221. ISSN 1726-0531

Olusanya, O A (2018) Subcontracting systems and social protection in the informal building construction industry in Lagos, Nigeria. Journal of Construction Business and Management, 2(1), pp. 10-19. ISSN 2521-0165

Omer, M M; Moyo, T; Al-Otaibi, A; Alawag, A M; Rizal Alias, A and Rahman, R A (2025) Critical factors affecting workplace well-being at construction sites across countries with different income levels. Construction Innovation, 25(1), pp. 104-130. ISSN 1471-4175

Omotayo, D T; Tan, S W and Ekundayo, D (2023) Sustainable construction and the versatility of the quantity surveying profession in Singapore. Smart and Sustainable Built Environment, 12(2), pp. 435-457. ISSN 2046-6099

Omotayo, T S (2017) Strategic realignment of the post-contract cost control process in the Nigerian construction industry using kaizen. PhD thesis, University of Salford, UK.

Onukwube, H N (2012) Leader influences on training effectiveness of construction professionals: The case of Nigeria. Journal of Construction in Developing Countries, 17(2), pp. 67-79. ISSN 1823-6499

Opawole, A; Kajimo-Shakantu, K; Alao, O O and Ogbaje, C P (2019) Risk factors associated with procuring university hostel facilities through build-operate-transfer model. Journal of Engineering, Design and Technology, 17(1), pp. 136-154. ISSN 1726-0531

Opdyke, A.; Latiph, A. A.; Shrief, M. C. and Yape, E. (2026) Displacement, infrastructure deficits and public health risks in post-conflict marawi during the COVID-19 pandemic. International Journal of Disaster Resilience in the Built Environment, 17(2), pp. 297-313. ISSN 1759-5908

Ophiyandri, T (2013) Project risk management for community-based post-disaster housing reconstruction. PhD thesis, University of Salford, UK.

Oppon, J A; Akomah, B B; Hagan, D E; Tieru, C K and Koufie, K (2025) Organizational culture and its impact on employees' safety. Construction Economics and Building, 25(3-4), pp. 121-142. ISSN 2204-9029

Ormerod, M and Newton, R (2013) Construction as a career choice for young disabled people: Dispelling the myths. Construction Management and Economics, 31(8), pp. 928-938. ISSN 1466433X

Osterberg, R (2003) Contracting out public services: An evaluation of the public consequences of opening up routine road maintenance to competition. PhD thesis, Kungliga Tekniska Hogskolan, Sweden.

Ostrovsky, Y (2003) Four studies of lifecycle patterns of housing arrangements in Canada. PhD thesis, York University, Canada.

Osuizugbo, I. C.; Awuzie, B. O. and Olorunlogbon, O. O. (2026) Assessing the proficiency and application of artificial intelligence skills among construction professionals in a developing country: Evidence from Nigeria. Journal of Engineering, Design and Technology, ISSN 1726-0531

Osuizugbo, I. C.; Oyeyipo, O. O.; Ojelabi, R. A. and Oshodi, O. S. (2021) Factors inhibiting corporate social responsibility initiatives among construction companies. Construction Economics and Building, 21(1), pp. 83-99. ISSN 2204-9029

Osuizugbo, I C; Oyeyipo, O O and Olojo, A D (2025) Drivers of corporate social responsibility initiatives among construction companies in Nigeria. International Journal of Building Pathology and Adaptation, 43(6), pp. 1595-1611. ISSN 2398-4708

Osuizugbo, I C (2021) The need for and benefits of buildability analysis: Nigeria as a case study. Journal of Engineering, Design and Technology, 19(5), pp. 1207-1230. ISSN 1726-0531

Osuizugbo, I C (2024) Factors impeding the implementation of buildability assessment in building construction industry. Journal of Engineering, Design and Technology, 22(6), pp. 1825-1846. ISSN 1726-0531

Osuizugbo, I C (2025) Measures for improving the buildability of building designs in construction industry. Construction Innovation, 25(2), pp. 490-509. ISSN 1471-4175

Osuizugbo, I C and Adenuga, O A (2024) Decisive factors for decision-making to achieving sustainable procurement in construction projects. International Journal of Building Pathology and Adaptation, 42(6), pp. 1185-1202. ISSN 2398-4708

Osuizugbo, I C; Aina, O O and Onokwai, A O (2023) Roles of clients in buildability improvement in Nigeria: An exploratory factor analysis. Built Environment Project and Asset Management, 13(6), pp. 862-879. ISSN 2044-124X

Osuizugbo, I C and Nnodu, C V (2023) Barriers to environmental impact assessment implementation for construction projects in Nigeria. Built Environment Project and Asset Management, 13(5), pp. 719-737. ISSN 2044-124X

Osuizugbo, I C; Okolie, K C and Oshodi, O S (2024) Factors supporting the implementation of buildability assessment as a tool for buildability improvement. Journal of Engineering, Design and Technology, 22(3), pp. 879-900. ISSN 1726-0531

Osuizugbo, I C; Okolie, K C and Oyeyipo, O O (2023) Factors influencing buildability assessment implementation in the Nigerian construction industry. Construction Innovation, 23(5), pp. 917-938. ISSN 1471-4175

Osuizugbo, I C; Onokwai, A O and Faleti, O O (2025) Principal factor analysis of project designers' roles in improving construction projects buildability in Nigeria. Journal of Engineering, Design and Technology, 23(1), pp. 88-107. ISSN 1726-0531

Osuizugbo, I C and Oshodi, O S (2023) Buildability attributes for improving the practice of construction management in Nigeria. Built Environment Project and Asset Management, 13(2), pp. 270-289. ISSN 2044-124X

Osuizugbo, I C; Oshodi, O S; Kukoyi, P O; Lawani, A O and Onokwai, A O (2025) Barriers to adoption of work–life balance practices amongst construction companies in Lagos, Nigeria: An exploratory factor analysis. Engineering, Construction and Architectural Management, 32(3), pp. 1643-1669. ISSN 0969-9988

Osuizugbo, I C; Oshodi, O S; Kukoyi, P O; Yohanna, H S and Edike, U E (2025) Implementation of work-life balance strategies among construction companies in Lagos, Nigeria: Construction workers' perspectives. Journal of Engineering, Design and Technology, 23(3), pp. 998-1016. ISSN 1726-0531

Otasowie, O.; Aigbavboa, C.; Oke, A. and Adekunle, P. (2026) Redefining key activities in construction organisations: Towards the adoption of circular economy business model. International Journal of Construction Management, 26(8), pp. 1428-1441. ISSN 1562-3599

Otasowie, O. K.; Aigbavboa, C. O.; Oke, A. E. and Adekunle, P. (2026) Channels as a determinant in circular economy business model for construction organisations. Journal of Engineering, Design and Technology, 24(1), pp. 105-123. ISSN 1726-0531

Otasowie, O. K.; Aigbavboa, C. O.; Oke, A. E.; Aghimien, D. and Adekunle, P. (2026) Closing the loop with construction clients: Relationship strategies for circular economy business model adoption. Journal of Engineering, Design and Technology, 24(5), pp. 1195-1214. ISSN 1726-0531

Otegbulu, A C and N.Onukwube, H (2007) Enhancing real estate investment through tero- value technology. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Otegbulu, A C; Osagie, J U and Famuyiwa, F (2009) A value hierarchy study of building services/components in commercial and residential developments: A comparative analysis. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Othman, Z M Z (2007) Classifying the aptitude of Civil Engineering Project Managers using Multivariate Discriminant Analysis. PhD thesis, Loughborough University, UK.

Owusu-Manu, D; Quaigrain, R and Edwards, D J (2015) Barriers constraining management innovation (mi) adoption in the Ghanaian construction consulting sector: A case study. Journal of Engineering, Design and Technology, 13(4), pp. 612-631.

Owusu-Manu, D G; Badu, E; Holt, G D and Edwards, D (2015) Determinants of management innovation in the Ghanaian construction consulting sector. Construction Economics and Building, 15(1), pp. 75-88. ISSN 2204-9029

Owusu-Manu, D G; Debrah, C; Oduro-Ofori, E; Edwards, D J and Antwi-Afari, P (2021) Attributable indicators for measuring the level of greenness of cities in developing countries: lessons from Ghana. Journal of Engineering, Design and Technology, 19(3), pp. 625-646. ISSN 1726-0531

Owusu-Manu, D G; Jehuri, A B; Edwards, D J; Boateng, F and Asumadu, G (2019) The impact of infrastructure development on economic growth in Sub-Saharan Africa with special focus on Ghana. Journal of Financial Management of Property and Construction, 24(3), pp. 253-273. ISSN 1366-4387

Oyegoke, A S (2006) Construction industry overview in the UK, US, Japan and Finland: a comparative analysis. Journal of Construction Research, 7(1), pp. 13-31. ISSN 1609-9451

Oyewobi, L O; Abiola-Falemu, O and Ibironke, O T (2016) The impact of rework and organisational culture on project delivery. Journal of Engineering, Design and Technology, 14(2), pp. 214-237.

Oyewole, E O and Dada, J O (2019) Training gaps in the adoption of building information modelling by Nigerian construction professionals. Built Environment Project and Asset Management, 9(3), pp. 399-411. ISSN 2044-124X

Ozener, O O (2009) Studio education for integrated practice using building information modeling. PhD thesis, Texas A&M University, USA.

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Pallyyaguru, Roshani Sandika (2010) Influence of integrating disaster risk reduction within post-disaster infrastructure reconstruction on socio-economic development. PhD thesis, University of Salford, UK.

Panas, A and Pantouvakis, J P (2014) Simulation-based and statistical analysis of the learning effect in floating caisson construction operations. Journal of Construction Engineering and Management, 140(1): 04013033, ISSN 0733-9364

Panthaworn, P (2005) An exploratory study of motivation of management personnel in the heavy construction industry. PhD thesis, University of Texas at Austin, USA.

Park, J; Marks, E; Cho, Y K and Suryanto, W (2016) Performance test of wireless technologies for personnel and equipment proximity sensing in work zones. Journal of Construction Engineering and Management, 142(1): 04015049, ISSN 0733-9364

Park, T; Mahamadu, A M; Agyekum, K; Adade-Boateng, A O; Manu, P; Adinyira, E and Adukpo, S (2025) An inquiry into the health and safety management practices of construction firms in South Korea. Journal of Engineering, Design and Technology, 23(2), pp. 345-367. ISSN 1726-0531

Parkinson, A T; Reid, R; McKerrow, H and Wright, D (2018) Evaluating positivist theories of occupant satisfaction: A statistical analysis. Building Research & Information, 46(4), pp. 430-443. ISSN 0961-3218

Pasqual, I R and Ekanayake, L (2025) Win–win approach to subcontracting in building construction: Sri Lankan perspective. Construction Economics and Building, 25(3-4), pp. 339-357. ISSN 2204-9029

Patching, Alan (2019) Attitudes to psychological stress awareness, avoidance and management in organisations engaged in construction project management: A comparison with business at large. PhD thesis, Bond University, Australia.

Patel, D A and Jha, K N (2016) An estimate of fatal accidents in Indian construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Pathak, C (2021) Electric vehicle infrastructure decision support system. PhD thesis, University of Washington, USA.

Pathirage, C P (2007) A structured approach to manage the tacit knowledge of construction employees. PhD thesis, University of Salford, UK.

Patriarca, A S (2013) Safety at the margins: A rhetorical analysis of occupational risk communication in construction. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Paulson, B C and Fondahl, J W (1983) Craft jurisdiction impact on construction. Journal of Construction Engineering and Management, 109(4), pp. 369-386. ISSN 0733-9364

Paulson-Smith, J K (1999) Women in construction management: An examination of self-efficacy and perceived barriers. PhD thesis, University of Missouri - Columbia, USA.

Perry, L J (2006) Industrial disputes in the construction sector. Construction Economics and Building, 6(1), pp. 42-50. ISSN 2204-9029

Petlíková, K (2021) Application of biological algorithms in standardization of construction work. PhD thesis, Czech Technical University, Czech Republic.

Phan, P T C and Zhou, Z (2024) Implementation of design for construction safety (DfS) in the Vietnam context: awareness, attitude and practices. Journal of Engineering, Design and Technology, 22(6), pp. 1958-1979. ISSN 1726-0531

Pim-Wusu, M; Simpeh, E K and Simberi, J N N (2025) Ascertaining adequacy of fire suppression systems: The perspective of Accra central of Ghana. Journal of Engineering, Design and Technology, 23(3), pp. 917-934. ISSN 1726-0531

Porto Valente, C; Morris, A and Wilkinson, S J (2022) Energy poverty, housing and health: The lived experience of older low-income australians. Building Research & Information, 50(1-2), pp. 6-18. ISSN 0961-3218

Powell, A; Hassan, T M; Dainty, A R J and Carter, C (2009) Exploring gender differences in construction research: A European perspective. Construction Management and Economics, 27(9), pp. 803-807. ISSN 1466433X

Prabhakaran, A (2023) Development of interactive and distributed virtual environments for immersive communication in the furniture, fixture and equipment sector. PhD thesis, University of the West of England, Bristol, UK.

Pramudya, A A; Wibowo, A; Santosa, W and Permana, F J (2025) A claim-based risk mapping of contractor's all-risk insurance in Indonesia. Construction Economics and Building, 25(1), pp. 122-142. ISSN 2204-9029

Priyadarshani, K; Karunasena, G and Jayasuriya, S (2013) Construction safety assessment framework for developing countries: A case study of Sri Lanka. Journal of Construction in Developing Countries, 18(1), pp. 33-51. ISSN 1823-6499

Radosavljević M, M W (2002) The evidence of complex variability in construction labour productivity. Construction Management and Economics, 20(1), pp. 3-12. ISSN 01446193

Radu, A C (2015) Life-cycle estimates of structures subjected to seismic loads. PhD thesis, Cornell University, USA.

Raina, P (2015) An examination of the retention practice in the New Zealand construction industry. PhD thesis, Auckland University of Technology, New Zealand.

Rajput, B; Kore, S and Agarwal, A (2024) Competencies of civil engineering graduates: Indian construction professionals' perspective. International Journal of Construction Management, 24(11), pp. 1240-1248. ISSN 1562-3599

Raliile, M.; Haupt, T. C. and Kajimo-Shakantu, K. (2026) The mediating and moderating role of coping on occupational stress and psychological well-being among the construction workforce in South Africa: The psychological stress theory approach. Journal of Engineering, Design and Technology, 24(2), pp. 427-447. ISSN 1726-0531

Ramachandra, T (2013) Exploring feasible solutions to payment problems in the construction industry in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Ramachandra, T; Rotimi, J O and Gunaratne, S (2014) Reasons for contractors' delay claims failures in Sri Lanka. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Ramanayaka, C D D (2013) Developing a strategy-led approach as a suitable methodology for construction project planning and implementation. PhD thesis, Auckland University of Technology, New Zealand.

Rantshilo, K; Mahamadu, A M; Agyekum, K; Cheung, C; Manu, P and Yunusa-Kaltungo, A (2024) Design for safety among design professionals in the Botswanan construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 27-38. ISSN 17514304

Renault, B Y; Agumba, J N and Ansary, N (2020) Correlation analysis between risk measurement and project success of small and medium contractors in Gauteng, South Africa. Journal of Construction Business and Management, 4(2), pp. 34-45. ISSN 2521-0165

Riaz, Z; Edwards, D J; Holt, G D and Thorpe, T (2011) Data flow analysis of plant and equipment health and safety management. Journal of Engineering, Design and Technology, 9(2), pp. 178-203. ISSN 1726-0531

Robert Thomas, R (2020) Examining the relationship of bid difference and disadvantaged business enterprise participation goals in highway construction projects. PhD thesis, Purdue University, USA.

Robinson, Benjamin Tyrell (2021) Identifying and pricing risk in residential development. PhD thesis, RMIT University, Australia.

Rohman, M A (2022) Assessment of the government's role performance in public-private partnership (PPP) toll road projects in Indonesia. Journal of Financial Management of Property and Construction, 27(2), pp. 239-258. ISSN 1366-4387

Rose, T; Manley, K and Widen, K (2019) Do firm-level barriers to construction product innovation adoption vary according to position in the supply chain? Construction Innovation, 19(2), pp. 212-235. ISSN 1471-4175

Rosenfeld, Y and Warszawski, A (1993) Forecasting methodology of national demand for construction labour. Construction Management and Economics, 11(1), pp. 18-29. ISSN 01446193

Ross, A D (2005) A model of contingency factors affecting contractors' economic organisation of projects. PhD thesis, University of Salford, UK.

Ross, A D and Goulding, J S (2006) The construction estimator's approach to the collection and assessment of supply chain price information. Journal of Construction Procurement, 12(1),

Rotimi, J O B; Ramanayaka, C D E; Olatunji, O A and Rotimi, F E (2023) Migrant construction workers' demography and job satisfaction: A new zealand study. Engineering, Construction and Architectural Management, 30(3), pp. 1122-1145. ISSN 0969-9988

Rotimi, J O B; Witton, F and Rasheed, E O (2023) The predictive power of managers' leadership attributes on workers' performance: A case of New Zealand construction industry. International Journal of Construction Management, 23(7), pp. 1214-1222. ISSN 1562-3599

Ruddock, L (1994) Performance and efficiency measurement in local authority building organisations. PhD thesis, University of Salford, UK.

Ruddock, L and Ruddock, S (2009) Reassessing productivity in the construction sector to reflect hidden innovation and the knowledge economy. Construction Management and Economics, 27(9), pp. 871-879. ISSN 1466433X

Ruddock, L and Ruddock, S (2019) Wealth measurement and the role of built asset investment: An empirical comparison. Engineering, Construction and Architectural Management, 26(5), pp. 766-778. ISSN 0969-9988

Ruegg, R T and Fuller, S K (1985) The economics of fire protection: Fast-response residential sprinklers. Construction Management and Economics, 3(1), pp. 43-57. ISSN 01446193

Runeson, K G (1988) Methodology and method for price-level forecasting in the building industry. Construction Management and Economics, 6(1), pp. 49-55. ISSN 01446193

Sachs, T; Tiong, R and Wagner, D (2007) Political risk quantification using fuzzy set approach. Journal of Financial Management of Property and Construction, 12(2), pp. 107-126. ISSN 1366-4387

Sadeh, H; Mirarchi, C; Shahbodaghlou, F and Pavan, A (2023) BIM feasibility for small and medium-sized contractors and subcontractors. International Journal of Construction Management, 23(6), pp. 999-1008. ISSN 1562-3599

Safougne Djomekui, B L and Yemmafouo, A (2023) Population resilience to flooding in the urbanised mangrove of Douala, Cameroon. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 135-153. ISSN 1759-5916

Saka, N (2011) An assessment of the level of adoption of e-business practices by Nigerian construction contractors. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Saka, N (2013) The impact of foreign direct investment on the construction sectors of Africa. PhD thesis, Glasgow Caledonian University, UK.

Saka, N and Mudi, A (2007) Practices and challenges of supply chain management by building contracting firms in the Lagos metropolitan area. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Salami, B A; Ajayi, S O and Oyegoke, A S (2022) Coping with the covid-19 pandemic: An exploration of the strategies adopted by construction firms. Journal of Engineering, Design and Technology, 20(1), pp. 159-182. ISSN 1726-0531

Salami, B A; Ajayi, S O and Oyegoke, A S (2023) Tackling the impacts of covid-19 on construction projects: An exploration of contractual dispute avoidance measures adopted by construction firms. International Journal of Construction Management, 23(7), pp. 1196-1204. ISSN 1562-3599

Saleh, N; Enshassi, A and Sundermeier, M (2021) Challenges hindering the resourcing for post-disaster housing reconstruction in Gaza. Journal of Construction in Developing Countries, 26(2), pp. 183-210. ISSN 1823-6499

Salleh, A G and Badarulzaman, N (2012) Quality of life of residents in urban neighbourhoods of Pulau Pinang, Malaysia. Journal of Construction in Developing Countries, 17(2), pp. 117-123. ISSN 1823-6499

Samwinga, V and Proverbs, D (2003) The repair of flood damaged property: A critical review of the needs of homeowners. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Sandanayake, M; Yang, W; Chhibba, N and Vrcelj, Z (2022) Residential building defects investigation and mitigation: a comparative review in Victoria, Australia, for understanding the way forward. Engineering, Construction and Architectural Management, 29(9), pp. 3689-3711. ISSN 0969-9988

Sanga, S A and Lucian, C (2016) Cost shares and factor-cost ratios in owner-built incremental housing in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 21(1), pp. 113-130. ISSN 1823-6499

Sanni, A A and Windapo, A O (2008) Evaluation of contractor’s quality control practices on construction sites in Nigeria. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Satish, S. and Umar, T. (2026) Bridging innovation and practice: Assessing the readiness for 3D printing in construction. Engineering, Construction and Architectural Management, 33(7), pp. 6014-6038. ISSN 0969-9988

Saunders, L W (2013) Measuring safety attitude differences in the construction supply chain. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Schröpfer, V (2013) Social network analysis of knowledge transfer in sustainable office building projects in the UK and Germany. PhD thesis, Oxford Brookes University, UK.

Scott-Young, C M; Turner, M and Holdsworth, S (2020) Male and female mental health differences in built environment undergraduates. Construction Management and Economics, 38(9), pp. 789-806. ISSN 01446193

Seaden, G; Guolla, M; Doutriaux, J and Nash, J (2003) Strategic decisions and innovation in construction firms. Construction Management and Economics, 21(6), pp. 603-612. ISSN 01446193

Seek, Ngee Huat (1981) Modification of the existing housing stock: A study of housing adjustments through home improvement. PhD thesis, Australian National University, Australia.

Selvam, G.; Kamalanandhini, M.; Velpandian, M.; Hariharan, R.; Mohanakrishna, S. and Thirumurugan, V. (2026) Integrated statutory waste management framework for the sustainable built environment. Engineering, Construction and Architectural Management, 33(5), pp. 4078-4097. ISSN 0969-9988

Seneviratne, K; Perera, S; Ginigaddara, B; Jin, X; Tang, L and Osei Kyei, R (2024) Good practices in COVID-19 risk reduction adopted by Australian construction enterprises. Built Environment Project and Asset Management, 14(3), pp. 449-469. ISSN 2044-124X

Senior, B A and Halpin, D W (1998) Simplified simulation system for construction projects. Journal of Construction Engineering and Management, 124(1), pp. 72-81. ISSN 0733-9364

Sertyesihsik, B (2006) The effectiveness of the five-year development plans on the development of the construction sector. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Seyis, S (2019) Pros and cons of using building information modeling in the AEC industry. Journal of Construction Engineering and Management, 145(8): 04019046, ISSN 0733-9364

Seyis, S and Ozkan, S (2024) Benefits and challenges of implementing the common data environments in the construction phase of BIM-based projects. Journal of Construction Engineering and Management, 150(8): 04024091, ISSN 0733-9364

Sezer, A A (2016) Construction performance measurement: Site managers in refurbishment projects. PhD thesis, Chalmers University of Technology, Sweden.

Sezer, A A and Bröchner, J (2014) The construction productivity debate and the measurement of service qualities. Construction Management and Economics, 32(6), pp. 565-574. ISSN 01446193

Shanmugapriya, S (2016) Structural equation modelling to investigate the factors influencing quality safety and productivity in construction projects. PhD thesis, Anna University, Chennai, India.

Shapira, A and Lyachin, B (2009) Identification and analysis of factors affecting safety on construction sites with tower cranes. Journal of Construction Engineering and Management, 135(1), pp. 24-33. ISSN 0733-9364

Sharar, M; Agyekum, K; Manu, P; Che Ibrahim, C K I; Mahamadu, A M; Antwi-Afari, M F and Danso, F O (2024) Design for safety in construction: A study of design professionals in Kuwait. International Journal of Building Pathology and Adaptation, 42(4), pp. 596-617. ISSN 23984708

Shash, A A and AbuAlnaja, F M (2023) Causes of material delays in capital projects in Saudi Arabia. International Journal of Construction Management, 23(7), pp. 1109-1117. ISSN 1562-3599

Shen, K; Li, X; Cao, X and Zhihui, Z (2021) Research on the rework risk core tasks in prefabricated construction in China. Engineering, Construction and Architectural Management, 28(10), pp. 3299-3321. ISSN 0969-9988

Shen, X; Marks, E; Pradhananga, N and Cheng, T (2016) Hazardous proximity zone design for heavy construction excavation equipment. Journal of Construction Engineering and Management, 142(6): 05016001, ISSN 0733-9364

Shen, Y (2013) An investigation of safety climate on Hong Kong construction sites. PhD thesis, University of Hong Kong, Hong Kong.

Sherratt, F (2018) Shaping the discourse of worker health in the UK construction industry. Construction Management and Economics, 36(3), pp. 141-152. ISSN 01446193

Shirley, C L M (2000) Firm inventory behavior and the returns from infrastructure investment. PhD thesis, University of California, Berkeley, USA.

Shiyanbola, R E and Olaleye, A (2022) An investigation of housing provision strategies adopted by private developers in Lagos, Nigeria. International Journal of Construction Management, 22(2), pp. 317-330. ISSN 1562-3599

Shokri-Ghasabeh, M and Chileshe, N (2014) Knowledge management: Barriers to capturing lessons learned from Australian construction contractors' perspectives. Construction Innovation, 14(1), pp. 108-134. ISSN 1471-4175

Shokri-Ghasabeh, M and Chileshe, N (2016) Critical factors influencing the bid/no bid decision in the Australian construction industry. Construction Innovation, 16(2), pp. 127-157. ISSN 1471-4175

Shrestha, Asheem (2015) Risk allocation in public private partnerships: A principal agent approach. PhD thesis, University of Melbourne, Australia.

Shrestha, P P; Shrestha, K K and Zeleke, H B (2019) Probability of change orders and the effect on cost and schedule for new public school buildings. Engineering, Construction and Architectural Management, 26(6), pp. 1087-1104. ISSN 0969-9988

Shrivastava, R (2020) Development of risk management model for construction of railway project in India. PhD thesis, University of Petroleum and Energy Studies, India.

Siew, R Y J (2015) Health and safety communication strategy in a Malaysian construction company: A case study. International Journal of Construction Management, 15(4), pp. 310-320. ISSN 1562-3599

Signor, R; Love, P E D; Belarmino, A T N and Alfred Olatunji, O (2020) Detection of collusive tenders in infrastructure projects: Learning from operation car wash. Journal of Construction Engineering and Management, 146(1): 05019015, ISSN 0733-9364

Simkoko, E E (1989) Analysis of factors impacting technology transfer in construction projects: Case studies from developing countries. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Simmons, K M; Czajkowski, J and Kovacs, P (2021) Building code effectiveness grading schedule participation analysis. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 67-83. ISSN 1759-5916

Simpeh, E K (2018) The adoption of green building in South Africa. PhD thesis, Nelson Mandela University, South Africa.

Simpeh, E K and Smallwood, J J (2020) An integrated model for predicting the probability of adoption of green building in South Africa. Journal of Engineering, Design and Technology, 18(6), pp. 1927-1950. ISSN 1726-0531

Simpeh, E K; Smallwood, J J; Ahadzie, D K and Mensah, H (2023) Analytical taxonomy of challenges to the implementation of green building projects in South Africa. International Journal of Construction Management, 23(2), pp. 286-296. ISSN 1562-3599

Simpeh, F and Adisa, S (2022) On-campus student accommodation safety measures: Provision versus risk analysis. International Journal of Building Pathology and Adaptation, 40(1), pp. 60-75. ISSN 23984708

Simukonda, W and Emuze, F (2024) Safety impacts of design for manufacturing and assembly techniques in off-site construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(1), pp. 16-24. ISSN 17514304

Simukonda, W T (2024) Modelling offsite construction to control hazards and direct cost of accidents. PhD thesis, Nelson Mandela University, South Africa.

Sing, C P; Love, P E D and Tam, C M (2012) Stock-flow model for forecasting labor supply. Journal of Construction Engineering and Management, 138(6), pp. 707-715. ISSN 0733-9364

Singh, A (1990) Development of process and mix flexibility in construction. PhD thesis, Purdue University, USA.

Singh, G and Banjoko, O O (1990) The development of a rational bill of quantities. Construction Management and Economics, 8(1), pp. 31-47. ISSN 01446193

Sirotiak, T L (2008) The effect of problem/project-based learning on a desired skill set for construction professionals. PhD thesis, Iowa State University, USA.

Smallwood, J (2005) The role of optimum health and safety (H&S) in construction marketing. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Sodeinde, G M (2021) Effect of entrepreneurial innovation on the performance of informal sector: A study of carpentry firms in Lagos State. PhD thesis, Kwara State University, Nigeria.

Sonson, S J (2018) Performance measurement and management within construction firms in Saint Lucia. PhD thesis, University of Salford, UK.

Sospeter, N G (2025) A categorization of factors affecting quality of design documentation in Tanzanian construction projects. Journal of Engineering, Design and Technology, 23(1), pp. 228-248. ISSN 1726-0531

Sospeter, N G and Kikwasi, G J (2020) Barriers to mentoring of graduates in quantity surveying firms: Finding a good fit. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Sousa, V; Almeida, N M and Dias, L A (2014) Role of statistics and engineering judgment in developing optimized time-cost relationship models. Journal of Construction Engineering and Management, 140(8): 04014034, ISSN 0733-9364

Stanford, M S and Molenaar, K R (2018) Influence of simplified procurement methods on competition for public sector construction. Journal of Construction Engineering and Management, 144(2): 04017105, ISSN 0733-9364

Steel, A C (1985) The diffusion of working time innovations in manufacturing and construction industry. PhD thesis, Brunel University, UK.

Stewardson, A; Edwards, D J; Asamoah, E; Aigbavboa, C O; Lai, J H K and El-Gohary, H (2023) The late payment epidemic in UK construction. Journal of Financial Management of Property and Construction, 28(3), pp. 374-397. ISSN 1366-4387

Subramaniyan, A S (2020) Engineering procurement and construction companies in India: Which factors drive their willingness to pay. PhD thesis, Chitkara University, Punjab, India.

Sumi, J A (2019) Enhancing the success rates through effective communication strategies: a case of the UK mid-sized construction projects. PhD thesis, University of the West of Scotland, UK.

Sumi, Julekha Akther (2019) Enhancing the success rates through effective communication strategies: A case of the UK midsized construction projects. PhD thesis, University of the West of Scotland, UK.

Summerfield, A J; Pathan, A; Lowe, R J and Oreszczyn, T (2010) Changes in energy demand from low-energy homes. Building Research & Information, 38(1), pp. 42-49. ISSN 0961-3218

Sundqvist, J; Larsson, B and Lindahl, G (2007) Cooperation in the building sector between building material manufacturers and contractors to develop products. Construction Economics and Building, 7(2), pp. 45-53. ISSN 2204-9029

Suresh, S; Olayinka, R; Chinyio, E and Renukappa, S (2017) Impact of knowledge management on construction projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(1), pp. 27-43. ISSN 17514304

Suresh, S; Renukappa, S; Alghanmi, I; Mushatat, S and Olayinka, R (2017) Examining the satisfaction level of construction workers regarding safety management in the kingdom of Saudi Arabia. Journal of Construction in Developing Countries, 22(1), pp. 97-113. ISSN 1823-6499

Sveikauskas, L; Rowe, S; Mildenberger, J; Price, J and Young, A (2016) Productivity growth in construction. Journal of Construction Engineering and Management, 142(10): 04016045, ISSN 0733-9364

Swai, L (2022) Development of a conceptual framework for enhancing payment practices in the UK construction industry. PhD thesis, Coventry University, UK.

Tah, J H M; Thorpe, A and McCaffer, R (1994) A survey of indirect cost estimating in practice. Construction Management and Economics, 12(1), pp. 31-36. ISSN 01446193

Tansey, P and Spillane, J (2016) From crisis to opportunity: Turnaround strategies of large Irish construction contractors during the period 2007-2015. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Tao, L and Kumaraswamy, M (2012) Unveiling relationships between contractor inputs and performance outputs. Construction Innovation, 12(1), pp. 86-98. ISSN 1471-4175

Tavares, V M M (2022) Life cycle assessment of prefabricated buildings towards a building stock approach. PhD thesis, Universidade de Coimbra, Portugal.

Taylor, M D (2010) A definition and valuation of the UK offsite construction sector. Construction Management and Economics, 28(8), pp. 885-896. ISSN 1466433X

Taylor, T R B; Uddin, M; Goodrum, P M; McCoy, A and Shan, Y (2012) Change orders and lessons learned: Knowledge from statistical analyses of engineering change orders on Kentucky highway projects. Journal of Construction Engineering and Management, 138(12), pp. 1360-1369. ISSN 0733-9364

Teferra, K (2012) Developments in the theory and applications of the variability response function concept. PhD thesis, Columbia University, USA.

Teizer, J (2016) Right-time vs real-time pro-active construction safety and health system architecture. Construction Innovation, 16(3), pp. 253-280. ISSN 1471-4175

Tembo, C K; Muleya, F and Kanyemba, A (2024) An appraisal of cost management techniques used in the construction industry. International Journal of Construction Management, 24(1), pp. 10-18. ISSN 1562-3599

Tennant, S and Langford, D (2006) Team performance measurement: Let's reward teamwork. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Tennant, S and Langford, D (2008) The construction project balanced scorecard. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Tetteh, M O; Chan, A P C; Darko, A; Yevu, S K; Boateng, E B and Nwaogu, J M (2022) Key drivers for implementing international construction joint ventures (icjvs): Global insights for sustainable growth. Engineering, Construction and Architectural Management, 29(9), pp. 3363-3393. ISSN 0969-9988

Tetteh, M O; Chan, A P C; Darko, A; Özorhon, B and Adinyira, E (2024) Developing a multidimensional performance measurement framework for international construction joint ventures (icjvs): The perspective of Ghana-hosted icjvs' practitioners. Engineering, Construction and Architectural Management, 31(12), pp. 4754-4790. ISSN 0969-9988

Tews, T; Skulmoski, G; Langston, C and Patching, A (2020) Innovation in project management education: Let's get serious! Construction Economics and Building, 20(3), pp. 124-141. ISSN 2204-9029

Tews, T; Skulmoski, G; Langston, C and Patching, A (2020) Innovation in project management education: let's get serious! Construction Economics and Building, 20(3), pp. 124-141. ISSN 2204-9029

Thiele, Brett James (2024) A financial decision support tool for improved project and portfolio profit performance in project-based organisations. PhD thesis, University of New South Wales, Australia.

Thneibat, M; Thneibat, M and Al-Tamimi, B (2022) Establishing the synergy between the perceptions of construction professionals and the phases of value management. Engineering, Construction and Architectural Management, 29(4), pp. 1835-1860. ISSN 0969-9988

Thomas, H R (1991) Labor productivity and work sampling: The bottom line. Journal of Construction Engineering and Management, 117(3), pp. 423-444. ISSN 0733-9364

Thompson, D E (2014) A study of building information modeling usage through the perceived utilization of facilities management training, building information modeling technical specifications, and a quality building information model for facilities management at higher educational institutions in Texas. PhD thesis, Texas A&M University, USA.

Tilde, A I and Fernando, N G (2024) Knowledge, attitude and practices of energy utilisation behaviours: A study of residential building occupants. Built Environment Project and Asset Management, 14(3), pp. 349-365. ISSN 2044-124X

Tissaveerasinghe, S P; Chathuranga, N and Siriwardana, C (2025) Compressed stabilised earth blocks as a sustainable building material: Investigation of customer purchase intentions. Built Environment Project and Asset Management, 15(4), pp. 808-826. ISSN 2044-124X

Toh, S C L; Wong, S Y and Ding, C S (2026) The impact of artificial intelligence on the quantity surveying profession in sarawak, Malaysia. Journal of Engineering, Design and Technology, 24(1), pp. 171-192. ISSN 1726-0531

Tolani, O V (2013) An examination of risk perceptions and allocation preferences in public-private partnerships in Nigeria. PhD thesis, University of Calgary, Canada.

Toyin, J O and Mewomo, M C (2023) An investigation of barriers to the application of building information modelling in Nigeria. Journal of Engineering, Design and Technology, 21(2), pp. 442-468. ISSN 1726-0531

Tran, V and Tookey, J (2011) Labour productivity in the New Zealand construction industry: A thorough investigation. Construction Economics and Building, 11(1), pp. 41-60. ISSN 2204-9029

Treloar, G J (1998) A comprehensive embodied energy analysis framework. PhD thesis, Deakin University, Australia.

Trifonov, N (2025) Build-up method for capitalization rate: Revisited. Journal of Financial Management of Property and Construction, 30(2), pp. 200-211. ISSN 1366-4387

Trigunarsyah, B (2007) Project designers' role in improving constructability of Indonesian construction projects. Construction Management and Economics, 25(2), pp. 207-215. ISSN 1466433X

Tsai, M-T (2008) Real option-based procurement for transportation services. PhD thesis, University of California, Irvine, USA.

Tseladikae, T.; Agumba, J.; Ochieng, G.; Adebowale, O. J. and Edwards, D. (2026) Correlation analysis of project management practices and performance outcomes in social housing projects. International Journal of Construction Management, 26(10), pp. 2085-2100. ISSN 1562-3599

Tucker, G C; Windapo, A and Cattell, K S (2015) Exploring the use of financial capacity as a predictor of construction company corporate performance: Evidence from South Africa. Journal of Engineering, Design and Technology, 13(4), pp. 596-611.

Tunji-Olayeni, P; Kajimo-Shakantu, K and Ayodele, T O (2024) Factors influencing the intention to adopt green construction: An application of the theory of planned behaviour. Smart and Sustainable Built Environment, 13(2), pp. 291-308. ISSN 2046-6099

Tunji-Olayeni, P; Kajimo-Shakantu, K and Osunrayi, E (2020) Practitioners' experiences with the drivers and practices for implementing sustainable construction in Nigeria: A qualitative assessment. Smart and Sustainable Built Environment, 9(4), pp. 443-465. ISSN 2046-6099

Ullal, A and Tombesi, P (2021) Dimensions and correlates of development in construction. Journal of Construction in Developing Countries, 26(2), pp. 37-64. ISSN 1823-6499

Ullal, André (2018) Clear, Hold and Build: Conditions and practices characterising construction in conflict and post-conflict settings. PhD thesis, University of Melbourne, Australia.

Umeokafor, N (2018) Community interventions in construction health and safety and the implications: Evidence from Nigeria. Journal of Financial Management of Property and Construction, 23(3), pp. 312-329. ISSN 1366-4387

Umeokafor, N (2018) An investigation into public and private clients' attitudes, commitment and impact on construction health and safety in Nigeria. Engineering, Construction and Architectural Management, 25(6), pp. 798-815. ISSN 0969-9988

Umeokafor, N and Windapo, A (2019) The influence of religious consciousness on construction health and safety practices and performance. Journal of Construction in Developing Countries, 24(1), pp. 23-47. ISSN 1823-6499

Venkataraman, V (2017) Investigating the impact of project management factors on green building project delivery using link analysis and system dynamics techniques. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Vermande, H M and Van Mulligen, P H (1999) Construction costs in the Netherlands in an international context. Construction Management and Economics, 17(3), pp. 269-283. ISSN 01446193

Verwey, J; Cumberlege, R and Crafford, G J (2023) Exploring the interplay between quantity surveyors' conflict-handling styles and personality traits. Journal of Construction Business and Management, 6(2), pp. 38-49. ISSN 2521-0165

Vidalakis, C; Abanda, F H and Oti, A H (2020) BIM adoption and implementation: focusing on SMEs. Construction Innovation, 20(1), pp. 128-147. ISSN 1471-4175

Vidalakis, C and Sommerville, J (2013) Transportation responsiveness and efficiency within the building supply chain. Building Research & Information, 41(4), pp. 469-481. ISSN 0961-3218

Vo, H (2024) Design creativity in Industry 4.0: Gravity Sketch and 3D printing in a Luminaire design project. Journal of Engineering, Design and Technology, 22(5), pp. 1413-1432. ISSN 1726-0531

Wagner, H; Kim, A J and Gordon, L (2013) Relationship between personal protective equipment, self-efficacy, and job satisfaction of women in the building trades. Journal of Construction Engineering and Management, 139(10): 04013005, ISSN 0733-9364

Walker, G (1999) A critical analysis into the factors that determine project management success: The case in railway engineering projects. PhD thesis, London South Bank University, UK.

Walker, G; Naoum, S and Howes, R (1997) Determinants of project management success. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Wall, J; Carney, M; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E; Önwy-Yazici, E and Jordan, A (2007) The delivery of health and safety training applying multiple intelligences using virtual classes. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Wamuziri, S (2008) Improving safety performance in construction through cultural change. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Wang, G; Xia, C and Cao, D (2020) State and determinants of inter-regional market entry practices in the Chinese construction industry: Evidence from national quality award projects. Engineering, Construction and Architectural Management, 27(7), pp. 1461-1477. ISSN 0969-9988

Wang, H; Sexton, M and Lu, S L (2016) The business logic of Chinese construction companies investing in the UK infrastructure sector. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Wang, X; Du, M; Li, H X; Hasan, A and Ahmadian Fard Fini, A (2025) Gender inequality and challenges of women in the construction industry: An evidenced-based analysis from China. Engineering, Construction and Architectural Management, 32(13), pp. 213-233. ISSN 0969-9988

Wang, Y (1998) An analysis of the technical efficiency in Hong Kong's construction industry. PhD thesis, University of Hong Kong, Hong Kong.

Watson, M (2007) Concerns for skills shortages in the 21st century: A review into the construction industry, Australia. Construction Economics and Building, 7(1), pp. 45-54. ISSN 2204-9029

Waziri, B S (2018) Pareto analysis of critical risk factors of build operate and transfer projects in Nigeria. Journal of Construction Business and Management, 2(1), pp. 33-40. ISSN 2521-0165

Weerasekara, G K T; Shandraseharan, A; Perera, B A K S and Disaratna, V (2023) The impact of building morphology factors on the cost and aesthetical appearance of urban detached residential buildings in Sri Lanka. Journal of Engineering, Design and Technology, 21(1), pp. 58-74. ISSN 1726-0531

Weerasinghe, A S; Ramachandra, T and Thurairajah, N (2017) Life cycle cost analysis: Green vs conventional buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Weitkamp, T K B (2024) Uncharted territory: Mapping diverse and dispersed smallholder irrigation in Sub-Saharan Africa through remote sensing. PhD thesis, Wageningen University and Research, Netherlands.

Wells, B; Senaratne, S; Mirza, O and Camille, C (2025) Overcoming challenges faced by female construction management graduates: An exploratory study in Australia. International Journal of Construction Management, 25(11), pp. 1337-1345. ISSN 1562-3599

Wibowo, A and Kochendörfer, B (2005) Financial risk analysis of project finance in Indonesian toll roads. Journal of Construction Engineering and Management, 131(9), pp. 963-972. ISSN 0733-9364

Williams, R C; Hildreth, J C and Vorster, M C (2009) Highway construction data collection and treatment in preparation for statistical regression analysis. Journal of Construction Engineering and Management, 135(12), pp. 1299-1306. ISSN 0733-9364

Williamson, A; Williams, C and Gameson, R (2010) The consideration of maintenance issues during the design process in the UK public sector. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Withana-Gamage, I S (2011) A waste minimisation framework for the procurement of design and build construction projects. PhD thesis, Loughborough University, UK.

Wong, F K W; Chan, A P C; Yam, M C H; Wong, E Y S; Tse, K T C; Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(2), pp. 130-142. ISSN 1726-0531

Wong, J M W; Chan, A P C and Chiang, Y H (2005) Time series forecasts of the construction labour market in Hong Kong: The Box-Jenkins approach. Construction Management and Economics, 23(9), pp. 979-991. ISSN 01446193

Wong, J M W; Chan, A P C and Chiang, Y H (2010) Modeling construction occupational demand: Case of Hong Kong. Journal of Construction Engineering and Management, 136(9), pp. 991-1002. ISSN 0733-9364

Wong, M W J (2006) Forecasting manpower demand in the construction industry of Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Wood, G; Davis, P and Lowe, J (2011) Concentration in the UK construction sector. Journal of Financial Management of Property and Construction, 16(3), pp. 232-248. ISSN 1366-4387

Wu, Lingzi (2021) Enhancing data-driven applications in construction. PhD thesis, University of Alberta, Canada.

Xiao, L; Mokhtar, N A and Sulaiman, M K A M (2025) Enhancing profitability and cost efficiency in China's construction industry. Construction Economics and Building, 25(3-4), pp. 1-21. ISSN 2204-9029

Xu, D; Agyekum, K; Manu, P; Cheung, C; Che Ibrahim, C K I; Mahamadu, A M and Perez, P A (2026) Design for safety (dfs) implementation in the construction industry: A study of design professionals in Northern China. Journal of Engineering, Design and Technology, 24(1), pp. 1-23. ISSN 1726-0531

Xu, L and Zhang, Z (2025) Influence of residential physical environments on occupant experience: Considering the moderating effects of indoor plants and climate zones. Engineering, Construction and Architectural Management, 32(9), pp. 5814-5838. ISSN 0969-9988

Yakubu, O A and Sun, M (2009) A survey of construction project cost and time control practices in the UK. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Yang, C (2004) Knowledge-based understanding and interpretation of construction engineering drawings. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Yang, F; Fei, Y; Guo, L; Bai, X and Li, X (2025) Job crafting intervention for job burnout and work engagement among young construction project management practitioners in China. Engineering, Construction and Architectural Management, 32(1), pp. 536-555. ISSN 0969-9988

Yang, G (2009) Evaluation method research and effect analysis of rural road construction on local development. PhD thesis, Harbin Institute of Technology, China.

Yang, H; Li, H; Wang, G and Cao, D (2025) Interregional migration of construction workers in China: Roles of employment opportunities and environment amenities. Engineering, Construction and Architectural Management, 32(1), pp. 87-108. ISSN 0969-9988

Yap, J. B. H.; Tan, Z. Y.; Skitmore, M.; Loo, S. C. and Yong, F. Y. Y. (2026) Unmasking green procurement: What drives adoption in developing-country construction? Construction Management and Economics, 44(5), pp. 337-358. ISSN 0144-6193

Yap, J B H and Cheah, S Y (2020) Key challenges faced by Chinese contractors in Malaysian construction industry: Empirical study. Journal of Engineering, Design and Technology, 18(3), pp. 705-726. ISSN 1726-0531

Yap, J B H and Chow, I N (2020) Investigating the managerial "nuts and bolts" for the construction industry. Built Environment Project and Asset Management, 10(3), pp. 331-348. ISSN 2044-124X

Yap, J B H; Leong, W J and Skitmore, M (2020) Capitalising teamwork for enhancing project delivery and management in construction: Empirical study in Malaysia. Engineering, Construction and Architectural Management, 27(7), pp. 1479-1503. ISSN 0969-9988

Yap, J B H and Lock, A (2017) Analysing the benefits, techniques, tools and challenges of knowledge management practices in the Malaysian construction SMEs. Journal of Engineering, Design and Technology, 15(6), pp. 803-825.

Yembi Renault, B; Agumba, J N and Ansary, N (2021) Regression analysis of the influence of demographic characteristics using risk management practices within South African small and medium construction enterprises. Journal of Engineering, Design and Technology, 19(6), pp. 1505-1529. ISSN 1726-0531

Yenisetty, P T and Bahadure, P (2021) Spatial accessibility measures to educational facilities from public transit: A case of Indian cities. Smart and Sustainable Built Environment, 10(2), pp. 258-273. ISSN 2046-6099

Yik, F W H; Lai, J H K; Chan, K T; Chau, C K and Lee, W L (2013) A portrait of building services engineers in Hong Kong. Engineering, Construction and Architectural Management, 20(1), pp. 63-82. ISSN 0969-9988

Ying, J F; Tookey, J and Roberti, J (2015) SCM competencies in construction: Issues and challenges in New Zealand. Journal of Engineering, Design and Technology, 13(4), pp. 522-538.

Yirenkyi-Fianko, A B and Chileshe, N (2012) Job satisfaction of professionals within the Ghanaian construction industry. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Yirenkyi-Fianko, A B and Chileshe, N (2015) An analysis of risk management in practice: The case of Ghana's construction industry. Journal of Engineering, Design and Technology, 13(2), pp. 240-259.

Yodites, R A (1997) Essential skills needed and training provided for chief school business officials in Los Angeles county to manage new and modernization construction projects. EdD thesis, University of La Verne, USA.

Yonat, N; Isaac, S and Shohet, I M (2025) Complex infrastructure systems analysis and management: The theory of faults. Smart and Sustainable Built Environment, 14(3), pp. 599-624. ISSN 2046-6099

Yoon, Y; Patel, S; Ji, R and Hastak, M (2017) Current state of reflective cracking in the United States. Journal of Construction Engineering and Management, 143(3): 04016099, ISSN 0733-9364

Yu, A T W (2017) Using jigsaw method to enhance the learning of research and consultancy techniques for postgraduate students. Engineering, Construction and Architectural Management, 24(6), pp. 1081-1091. ISSN 0969-9988

Yu, M K W and Ive, G (2011) Orders and output in UK construction statistics: New methodology and old problems. Construction Management and Economics, 29(7), pp. 653-658. ISSN 1466433X

Yu, W D; Wang, K C and Wu, H T (2022) Empirical comparison of learning effectiveness of immersive virtual reality-based safety training for novice and experienced construction workers. Journal of Construction Engineering and Management, 148(9): 04022078, ISSN 0733-9364

Yumarni, T and Amaratunga, D (2018) Gender mainstreaming as a strategy to achieve sustainable post-disaster reconstruction. Built Environment Project and Asset Management, 8(5), pp. 544-556. ISSN 2044-124X

Yusuf, A O; Afolabi, A; Akanmu, A; Murzi, H; Nieto Leal, A; Ball, S and Ofori-Boadu, A (2025) Collaborations between industry and academia for future workforce development: Construction practitioners’ perspective. Engineering, Construction and Architectural Management, 32(5), pp. 3166-3186. ISSN 0969-9988

Yusuf, A O; Opawole, A; Musa, N A; Kadiri, D S and Ebunoluwa, E I (2024) Factors influencing the organisational capabilities of the public sector for implementation of building information modelling in construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1058-1083. ISSN 2398-4708

Zafar, J and Chileshe, N (2018) Analysis of health and well-being practices among older construction site-based workers in South Australia. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Zailani, M B; Abubakar, M and Muhammad, A (2019) Assessment of barriers to risk management implementation in small construction projects in Nigeria. African Journal of Built Environment Research, 3(1), pp. 15-28. ISSN 2414-0236

Zainal Abidin, N A (2018) Resilience of Malaysian public sector construction industry to supply chain disruptions. PhD thesis, University of Huddersfield, UK.

Zeni, K S and Kikwasi, G J (2023) Factors affecting maintenance cost of public buildings: Case study of Tanzania buildings agency and national housing corporation. International Journal of Building Pathology and Adaptation, 41(5), pp. 926-941. ISSN 23984708

Zhang, F (2022) A hybrid structured deep neural network with word2vec for construction accident causes classification. International Journal of Construction Management, 22(6), pp. 1120-1140. ISSN 1562-3599

Zhang, H; Tam, C M; Li, H and Shi, J J (2006) Particle swarm optimization-supported simulation for construction operations. Journal of Construction Engineering and Management, 132(12), pp. 1267-1274. ISSN 0733-9364

Zhang, Peng (2015) Comparative research between the Chinese and the Australian construction industries based on productivity and industrial competitiveness. PhD thesis, RMIT University, Australia.

Zhao, Z Y and Shen, L Y (2008) Are Chinese contractors competitive in international markets? Construction Management and Economics, 26(3), pp. 225-236. ISSN 1466433X

Zhou, H W; Zhou, Y H and Zhao, C J (2016) Fault-response mechanism of production system in concrete-dam-construction simulation. Journal of Construction Engineering and Management, 142(11): 04016065, ISSN 0733-9364

Zhuravchak, R; Nord, N and Brattebø, H (2022) The effect of building attributes on the energy performance at a scale: An inferential analysis. Building Research & Information, 50(6), pp. 662-680. ISSN 0961-3218

Zolkafli, U K; Zakaria, N; Mohammad Mazlan, A and Ali, A S (2019) Maintenance work for heritage buildings in Malaysia: Owners' perspectives. International Journal of Building Pathology and Adaptation, 37(1), pp. 186-195. ISSN 23984708

Zuppa, D (2009) Model for developing trust in construction management. PhD thesis, University of Florida, USA.

van Eck, E (2024) Early career development of candidate quantity surveyors: A focus on soft skills development. PhD thesis, University of Pretoria, South Africa.

Štaube, T; Leemeijer, B; Geipele, S; Kauškale, L; Geipele, I and Jansen, J (2016) Economic and financial rationale for age-friendly housing. Journal of Financial Management of Property and Construction, 21(2), pp. 99-121. ISSN 1366-4387