Items with Index Term: slope

Abounia Omran, B (2016) Application of data mining and big data analytics in the construction industry. PhD thesis, Ohio State University, USA.

Ahmad Shazali, A S and Tahar, K N (2020) Virtual 3D model of canseleri building via close-range photogrammetry implementation. International Journal of Building Pathology and Adaptation, 38(1), pp. 217-227. ISSN 23984708

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: Site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 53-65. ISSN 1759-5916

Al-Khatri, H; Etri, T and Gadi, M B (2022) User response to indoor thermal environment in female high school buildings in Oman. Building Research & Information, 50(1-2), pp. 192-212. ISSN 0961-3218

Alam, M K and Hasan, M D R (2010) Protection works against wave attacks in the haor areas of Bangladesh: Analysis of sustainability. Journal of Construction in Developing Countries, 15(2), pp. 69-85. ISSN 1823-6499

Alshboul, O; Shehadeh, A and Hamedat, O (2023) Development of integrated asset management model for highway facilities based on risk evaluation. International Journal of Construction Management, 23(8), pp. 1355-1364. ISSN 1562-3599

Barati, K; Shen, X; Li, N and Carmichael, D G (2022) Automatic mass estimation of construction vehicles by modeling operational and engine data. Journal of Construction Engineering and Management, 148(3): 4021208, ISSN 0733-9364

Bettemir, Ö H and Birgonul, M T (2025) Solution of discrete time–cost trade-off problem with adaptive search domain. Engineering, Construction and Architectural Management, 32(2), pp. 1032-1052. ISSN 0969-9988

Carandang, A M S; Garciano, L E O; Maruyama, O and De Jesus, R (2020) Proposed resilience index of water lifeline systems. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 253-264. ISSN 1759-5916

Chapman, C (2023) Green and grey drainage infrastructure: costs and benefits of reducing surface water flood risk. PhD thesis, University of Oxford, UK.

Choi, S D; Griinke, D and Lederer, M (2006) Fall protection equipment effects on productivity and safety in residential roofing construction. Journal of Construction Research, 7(1), pp. 149-157. ISSN 1609-9451

Chrzanowski, E N and Johnston, D W (1986) Application of linear scheduling. Journal of Construction Engineering and Management, 112(4), pp. 476-491. ISSN 0733-9364

Congress, S S C (2018) Novel infrastructure monitoring using multifaceted unmanned aerial vehicle systems: close range photogrammetry (UAV-CRP) data analysis. PhD thesis, University of Texas at Arlington, USA.

Dahalan, N H; Rahman, R A; Ahmad, S W and Che Ibrahim, C K I (2025) Public monitoring of environmental management plan implementation in road construction projects: Key performance indicators. Journal of Engineering, Design and Technology, 23(3), pp. 766-791. ISSN 1726-0531

Dar, J (2020) Solar splitting day-lighting system "SolsDays": The first beam splitting day-lighting system. Smart and Sustainable Built Environment, 9(2), pp. 130-143. ISSN 2046-6099

Dehdasht, G; Ferwati, M S; Abidin, N Z and Oyedeji, M O (2022) Trends of construction industry in Malaysia and its emerging challenges. Journal of Financial Management of Property and Construction, 27(2), pp. 161-178. ISSN 1366-4387

Ding, G and Forsythe, P (2016) A comparative study of floor construction on sloping sites: An analysis of cumulative energy demand and greenhouse gas emissions. Construction Economics and Building, 16(1), pp. 33-49. ISSN 2204-9029

Ding, G and Forsythe, P J (2013) Sustainable construction: Life cycle energy analysis of construction on sloping sites for residential buildings. Construction Management and Economics, 31(3), pp. 254-265. ISSN 1466433X

Dutta, A (2020) An in-depth investigation of the effects of work-related factors on the development of knee musculoskeletal disorders among construction roofers. PhD thesis, West Virginia University, USA.

Dutta, A; Breloff, S P; Dai, F; Sinsel, E W; Warren, C M and Wu, J Z (2020) Identifying potentially risky phases leading to knee musculoskeletal disorders during shingle installation operations. Journal of Construction Engineering and Management, 146(3): 04019118, ISSN 0733-9364

Elimov, R (2003) The control of concrete quality during slipforming operations. PhD thesis, Universite de Sherbrooke, Canada.

Forsythe, P and Ding, G (2014) Greenhouse gas emissions from excavation on residential construction sites. Construction Economics and Building, 14(4), pp. 1-10. ISSN 2204-9029

Gwak, H S; Son, S H; Park, Y J and Lee, D E (2016) Exact time-cost tradeoff analysis in concurrency-based scheduling. Journal of Construction Engineering and Management, 142(10): 04016054, ISSN 0733-9364

Haddad, S; Osmond, P and King, S (2019) Application of adaptive thermal comfort methods for Iranian schoolchildren. Building Research & Information, 47(2), pp. 173-189. ISSN 0961-3218

Harode, A; Thabet, W and Leite, F (2024) Formulation of feature and label space using modified Delphi in support of developing a machine-learning algorithm to automate clash resolution. Journal of Construction Engineering and Management, 150(3): 04023173, ISSN 0733-9364

Harris, R B and Ioannou, P G (1998) Scheduling projects with repeating activities. Journal of Construction Engineering and Management, 124(4), pp. 269-278. ISSN 0733-9364

Hosseini Sabzevari, S A; Mottaki, Z; Hassani, A; Zandiyeh, S and Aslani, F (2023) Temporary housing site selection in soffeh mountain, district 5 of Isfahan, Iran. International Journal of Disaster Resilience in the Built Environment, 14(5), pp. 611-627. ISSN 1759-5916

Imam, H (2021) Roles of shared leadership, autonomy, and knowledge sharing in construction project success. Journal of Construction Engineering and Management, 147(7): 04021067, ISSN 0733-9364

Istijono, B; Hakam, A and Ophiyandri, T (2016) Landslide hazard of Maninjau area. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 302-312. ISSN 1759-5916

Joshi, P; Kumar, A; Singh, P V and Jahangeer, J (2020) Sediment outflow under simulated rainfall conditions with varying geotechnical properties. Journal of Construction Engineering and Management, 146(7): 04020074, ISSN 0733-9364

Kanguwe, D F (2024) Entrepreneurial orientation and financial performance in the South African construction and materials sector: A focus on bricolage capability and absorptive capacity. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Kazaz, Billur (2022) Improvements in construction stormwater treatment using flocculants. PhD thesis, Auburn University, USA.

Khaleghi, S and Jadmavinejad, A (2024) Flood susceptibility mapping in anthropogenic wetland area, Shadegan County, Southwest of Iran. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 212-226. ISSN 1759-5916

Koem, C and Tantanee, S (2021) Flash flood hazard mapping based on AHP with GIS and satellite information in Kampong Speu province, Cambodia. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 457-470. ISSN 1759-5916

Kumar, S; Singh, L K; Roy, L B; Kumar, R and Lal, D (2025) Enhancing the sustainability of slope stability in embankment construction by leveraging smart sensors and monitoring systems for data-driven insights. International Journal of Construction Management, 25(16), pp. 2102-2120. ISSN 1562-3599

Liang, L Y; Thompson, R G and Young, D M (2004) Optimising the design of sewer networks using genetic algorithms and tabu search. Engineering, Construction and Architectural Management, 11(2), pp. 101-112. ISSN 0969-9988

Lin, Y; Wu, D; Wang, X; Wang, X and Gao, S (2012) Statics-based simulation approach for two-crane lift. Journal of Construction Engineering and Management, 138(10), pp. 1139-1149. ISSN 0733-9364

Lowe, J (2023) Technical and organisational change in UK construction. Journal of Construction Business and Management, 6(2), pp. 50-61. ISSN 2521-0165

Lv, Y; Feng, J; Wang, G and Li, H (2024) Stability characteristics and experiment of hydraulic drive four-wheel chassis. Journal of Engineering, Design and Technology, 22(2), pp. 598-612. ISSN 1726-0531

Lü, X; Liu, Z; Lü, X and Wang, X (2024) Design and study on the leveling mechanism of the tractor body in hilly and mountainous areas. Journal of Engineering, Design and Technology, 22(3), pp. 679-689. ISSN 1726-0531

Mouri, M M; Han, W; Xu, L; Ghasemi, A; Loh, W Y; Zhu, Z and Dai, F (2026) Assessing impacts of drone-induced distraction on postural stability of roofers during shingle installation on inclined surfaces. Journal of Construction Engineering and Management, 152(6): 04026061, ISSN 0733-9364

Nauman, S; Zheng, C and Ahmad, R (2021) Employee career outlook and turnover: Unleashing the roles of career adaptability and career satisfaction in international construction projects. Journal of Construction Engineering and Management, 147(11): 04021150, ISSN 0733-9364

Okello, J F; Bowa, O and Migosi, J (2025) The role of project delivery methods on the execution of construction projects in the Kenyan judiciary. Construction Economics and Building, 25(1), pp. 49-68. ISSN 2204-9029

Oo, B L (2007) Modelling individual contractors' bidding decisions in different competitive environments. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Oo, B L; Drew, D S and Lo, H P (2010) Modeling the heterogeneity in contractors' mark-up behavior. Journal of Construction Engineering and Management, 136(7), pp. 720-729. ISSN 0733-9364

Rajagopalan, K S (1988) Supports for traveling cranes: Case history. Journal of Construction Engineering and Management, 114(1), pp. 114-120. ISSN 0733-9364

Reger, Darren Peter (2015) Economically and environmentally informed policies for road resurfacing: Tradeoffs between costs and greenhouse gas emissions. PhD thesis, University of California, USA.

Richter, S M and Bixler, R P (2022) Complexifying urban expansion: An exploratory, gradient-based approach. Buildings & Cities, 3(1), pp. 792-807. ISSN 2632-6655

Sarhan, M (2008) Risk-based approach in highway geometric design. PhD thesis, Carleton University, Canada.

Schexnayder, C; Alarcón, L F; Antillo, E D; Morales, B C and Lopez, M (2014) Observations on bridge performance during the Chilean earthquake of 2010. Journal of Construction Engineering and Management, 140(4): B4013001, ISSN 0733-9364

Smith, D J (2003) Ecological effects of roads: Theory, analysis, management, and planning considerations. PhD thesis, University of Florida, USA.

Sonmez, R; Aminbakhsh, S and Atan, T (2020) Activity uncrashing heuristic with noncritical activity rescheduling method for the discrete time-cost trade-off problem. Journal of Construction Engineering and Management, 146(8): 1870, ISSN 0733-9364

Su, Y.; Gao, X. and Zheng, Z. (2026) Unsupervised deep learning and Bayesian network-based identification of key risk factors in construction quality defects. Journal of Construction Engineering and Management, 152(7): 04026083, ISSN 0733-9364

Susilo, A; Fitriah, F; Ayu Rachmawati, E T and Suryo, E A (2020) Analysis of landslide area of Tulung Subdistrict, Ponorogo, Indonesia in 2017 using resistivity method. Smart and Sustainable Built Environment, 9(4), pp. 341-360. ISSN 2046-6099

Szalay, Z (2008) Modelling building stock geometry for energy, emission and mass calculations. Building Research & Information, 36(6), pp. 557-567. ISSN 0961-3218

Tai, H W; Chen, J H; Cheng, J Y; Wei, H H; Hsu, S C and Liu, H C (2021) Determining worker training time for precast component production in construction: Empirical study in Taiwan. Journal of Construction Engineering and Management, 147(1): 0001964, ISSN 0733-9364

Thomas, H R; Guevara, J M and Gustenhoven, C T (1984) Improving productivity estimates by work sampling. Journal of Construction Engineering and Management, 110(2), pp. 178-188. ISSN 0733-9364

Tischer, T E and Kuprenas, J A (2003) Bridge falsework productivity: measurement and influences. Journal of Construction Engineering and Management, 129(3), pp. 243-250. ISSN 0733-9364

Uddin, W (2008) Airborne laser terrain mapping for expediting highway projects: Evaluation of accuracy and cost. Journal of Construction Engineering and Management, 134(6), pp. 411-420. ISSN 0733-9364

Van Bohemen, H D (2004) Ecological engineering and civil engineering works. PhD thesis, Delft University of Technology, Netherlands.

Wang, D; Dai, F; Ning, X; Dong, R G and Wu, J Z (2017) Assessing work-related risk factors on low back disorders among roofing workers. Journal of Construction Engineering and Management, 143(7): 04017026, ISSN 0733-9364

Windapo, A; Odediran, S; Moghayedi, A; Adediran, A and Oliphant, D (2017) Determinants of building construction costs in South Africa. Journal of Construction Business and Management, 1(1), pp. 8-13. ISSN 2521-0165

Xiao, Y (2017) Three-dimensional reconstruction and modeling using low-precision vision sensors for automation and robotics applications in construction. PhD thesis, University of Michigan, USA.

Yoon, Y and Gangarao, H (2021) Prioritization framework for rockfall countermeasures for rock-cut slopes for rural roads. Journal of Construction Engineering and Management, 147(10), ISSN 0733-9364

Zamalik, M N and Nawi, M N M (2024) Managing soil and geotechnical aspects in housing developments: Analysis of case studies. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Zhang, J; Zhou, Q and Zhang, S (2022) Case study of field application of prefabricated anchoring frame beam structure in slope supporting projects. Journal of Construction Engineering and Management, 148(9): 05022008, ISSN 0733-9364

Zhu, W; Li, J; Shen, K and Li, X (2025) Carbon dioxide emission reduction assessments of recycled aggregate concrete applications for infrastructure by incorporating vegetation carbon sink. Journal of Construction Engineering and Management, 151(9): 04025132, ISSN 0733-9364

Zhu, Y; Brigham, J C and Fascetti, A (2025) Lidar-rgb data fusion for four-dimensional uav-based monitoring of reinforced concrete bridge construction: Case study of the fern hollow bridge reconstruction. Journal of Construction Engineering and Management, 151(1): 05024016, ISSN 0733-9364