Items with Index Term: shear strength

Alluqmani, A E (2014) Design and behaviour of R.C. Beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(2), pp. 158-176. ISSN 1726-0531

Aviram Traubita, A (2009) Structural response and cost characterization of bridge construction using seismic performance enhancement strategies. PhD thesis, University of California, Berkeley, USA.

Ayed Eid, A (2021) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), pp. 932-942. ISSN 1726-0531

Galanis, P (2014) Probabilistic methods to identify seismically hazardous older-type concrete frame buildings. PhD thesis, University of California, Berkeley, USA.

Ghannoum, M; Assaad, J; Daaboul, M and El-Mir, A (2025) Deterministic and stochastic finite element modeling of reinforced concrete beams without stirrups containing plastic wastes. International Journal of Building Pathology and Adaptation, 43(4), pp. 614-632. ISSN 2398-4708

Hachem, A A K; Khatib, J M and Ezzedine El Dandachy, M (2025) Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer. International Journal of Building Pathology and Adaptation, 43(4), pp. 732-748. ISSN 2398-4708

Hasheminasab, S and Kashi, E (2021) Finite element analysis of ports pavement under container loading. Journal of Engineering, Design and Technology, 19(2), pp. 497-508. ISSN 1726-0531

Hoque, M I; Hasan, M and Datta, S D (2026) Undrained shear strength of soft clay reinforced with encapsulated stone dust columns. International Journal of Building Pathology and Adaptation, 44(1), pp. 1-14. ISSN 2398-4708

Joshi, P; Kumar, A; Singh, P V and Jahangeer, J (2020) Sediment outflow under simulated rainfall conditions with varying geotechnical properties. Journal of Construction Engineering and Management, 146(7): 04020074, ISSN 0733-9364

Karshenas, S (1997) Strength variability of conventional slab formwork systems. Journal of Construction Engineering and Management, 123(3), pp. 324-330. ISSN 0733-9364

Mane, K M; Kulkarni, D K and Prakash, K B (2021) Prediction of shear strength of concrete produced by using pozzolanic materials and partly replacing nfa by MS using ann. Journal of Engineering, Design and Technology, 19(2), pp. 578-587. ISSN 1726-0531

O'Mahony, M M (1990) Recycling of materials in civil engineering. PhD thesis, University of Oxford, UK.

Pekmezci, B Y and Polat Pekmezci, I (2022) Development of shear strength index test probe: Its application on historic structures. International Journal of Building Pathology and Adaptation, 40(5), pp. 693-711. ISSN 23984708

Platt, R T (1998) Development of a ready-to-assemble construction system. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Tsai, W-S (1995) Evaluation of geotextiles as separators in roadways. PhD thesis, University of Washington, USA.

Wang, L (2018) Deconstructable systems for sustainable design of steel and composite structures. PhD thesis, Northeastern University, USA.