Items with Index Term: sand

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Adegun, O B (2023) Climatic disasters within a flood-prone coastal slum in Lagos: Coping capacities and adaptation prospects. International Journal of Disaster Resilience in the Built Environment, 14(2), pp. 212-228. ISSN 1759-5916

Aka, A; Bamgbade, A A; Saidu, I and Balogun, O M (2019) A conceptual framework for waste identification and reduction in Nigerian sandcrete blocks production process. Construction Innovation, 19(3), pp. 405-423. ISSN 1471-4175

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

Asa, E; Anna, A S and Baffoe-Twum, E (2019) An investigation of mechanical behavior of concrete containing crushed waste glass. Journal of Engineering, Design and Technology, 17(6), pp. 1285-1303. ISSN 1726-0531

Asiedu, R O (2017) Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(3), pp. 305-316.

Balamurali, B; Anand, N; Thomas, M and Chin, C (2025) High-strength geopolymer based engineered cementitious composites (ECC) for sustainable and resilient construction. Journal of Engineering, Design and Technology, 23(5), pp. 1751-1769. ISSN 1726-0531

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Bambrick, B (1994) Construction of an island. Journal of Construction Engineering and Management, 120(1), pp. 223-227. ISSN 0733-9364

Bassioni, H; Emasry, M I; Ragheb, A M and Youssef, A A (2012) Time series analysis for the prediction of RC material components prices in Egypt. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Chennarapu, H; Garala, T K; Chennareddy, R; Balunaini, U and Venkata Narasimha Reddy, G (2018) Compaction quality control of earth fills using dynamic cone penetrometer. Journal of Construction Engineering and Management, 144(9): 04018086, ISSN 0733-9364

Choudhary, K; Gill, G; Sangwa, N R and Sarna, B (2025) Utilising copper tailings as a sustainable alternative to conventional structural filling materials: LCA analysis. Built Environment Project and Asset Management, 15(3), pp. 415-431. ISSN 2044-124X

Condon, E J (2006) The project game: Strategic estimating on major projects. PhD thesis, University of Calgary, Canada.

Das, P P; Khatri, V N; Doley, R; Dutta, R K and Yadav, J S (2024) Estimation of bearing capacity of shallow footings on layered sand using finite elements analysis. Journal of Engineering, Design and Technology, 22(2), pp. 385-403. ISSN 1726-0531

Eziefula, U G; Opara, H E and Eziefula, B I (2020) Strength of concrete produced with different sources of aggregates from selected parts of Abia and Imo States of Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1053-1061. ISSN 1726-0531

Fore, S and Mbohwa, C T (2010) Cleaner production for environmental conscious manufacturing in the foundry industry. Journal of Engineering, Design and Technology, 8(3), pp. 314-333. ISSN 1726-0531

Gashahun, A D (2022) Investigating sand quality effect on concrete strength: A case of debre markos and its vicinities. International Journal of Construction Management, 22(12), pp. 2234-2242. ISSN 1562-3599

Gull, I (2011) Testing of strength of recycled waste concrete and its applicability. Journal of Construction Engineering and Management, 137(1), pp. 1-5. ISSN 0733-9364

Gupta, N K; Thakre, G D and Kumar, M (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology, 18(5), pp. 1357-1370. ISSN 1726-0531

Han, Sang Hyeok (2014) BIM-based motion planning of mobile crane operation in modular-based heavy construction sites. PhD thesis, University of Alberta, Canada.

Hanna, K E; Morcous, G and Tadros, M K (2009) Effectiveness of class c fly ash on mitigating alkali-silica reaction in concrete pavement. International Journal of Construction Education and Research, 5(3), pp. 167-181. ISSN 1557-8771

Hasan, M R; Sagar, M S I and Ray, B C (2023) Barriers to improving construction and demolition waste management in Bangladesh. International Journal of Construction Management, 23(14), pp. 2333-2347. ISSN 1562-3599

Hasan, M S (2013) Decision support system for crane selection and location optimization on construction sites. PhD thesis, University of Alberta, Canada.

Hilf, J W (1987) Rolled concrete dams using gap-graded aggregate. Journal of Construction Engineering and Management, 113(1), pp. 27-33. ISSN 0733-9364

Hinze, J and Nelson, A (1996) Enhancing performance of soundless chemical demolition agents. Journal of Construction Engineering and Management, 122(2), pp. 193-195. ISSN 0733-9364

Hossain, Y (2017) Energy-efficient homes in Alaska: Historical and contemporary perspectives on adaptation and innovation. PhD thesis, University of Alaska Fairbanks, USA.

Ibrahim, A G; Garba, M M; Okoli, O G; Zubairu, I K; Dahiru, D and Usman, J (2020) Properties of reactive powder concrete produced with unrefined metakaolin and gear inner wire. African Journal of Built Environment Research, 4(1), pp. 81-95. ISSN 2414-0236

Jain, S; Singhal, S and Jain, N K (2021) Construction and demolition waste (C&DW) in India: Generation rate and implications of C&DW recycling. International Journal of Construction Management, 21(3), pp. 261-270. ISSN 1562-3599

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Kar, S (2021) Developing a decision support system for effective material management in construction. PhD thesis, Indian Institute of Technology Delhi, India.

Kar, S and Jha, K N (2022) Assessing criticality of construction materials for prioritizing their procurement using ANP-TOPSIS. International Journal of Construction Management, 22(10), pp. 1852-1862. ISSN 1562-3599

Karri, S K; Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(1), pp. 42-59. ISSN 1726-0531

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Kinner, E B and Stimpson, W E (1983) Artesian pressure relief for Trident drydock. Journal of Construction Engineering and Management, 109(1), pp. 74-88. ISSN 0733-9364

Kleemann, F; Lederer, J; Aschenbrenner, P; Rechberger, H and Fellner, J (2016) A method for determining buildings' material composition prior to demolition. Building Research & Information, 44(1), pp. 51-62. ISSN 0961-3218

Lane, P M M (2009) The nature of claims: managing the risks. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 162(4), pp. 185-190. ISSN 17514312

Lau, S C; Lu, M and Poon, C S (2014) Formalized approach to discretize a continuous plant in construction simulations. Journal of Construction Engineering and Management, 140(8): 04014032, ISSN 0733-9364

Licher, Monica Katherine (2016) Estimating post-construction costs of a changing urban stormwater program. PhD thesis, Virginia Tech, USA.

Mahdi, I M; Arafat, H; Ebid, A M and El-Kadi, A F (2023) Decision model to identify the optimum retaining wall type for restricted highway projects sites. International Journal of Construction Management, 23(8), pp. 1387-1394. ISSN 1562-3599

Malhotra, M; Sahu, V; Srivastava, A and Misra, A K (2020) Experimental and numerical investigation of the effect of pre-existing utility tunnel on the bearing capacity of shallow footing in sandy soils. Journal of Engineering, Design and Technology, 18(3), pp. 513-529. ISSN 1726-0531

McGuire, J P (1995) Assessment of the perceptions and attitudes of construction aggregate mine operators and county regulatory officials regarding aggregate mining. PhD thesis, Iowa State University, USA.

Mensah, S; Ameyaw, C; Abaitey, B A and Yeboah, H O (2022) Optimizing stabilization of laterite as walling unit. Journal of Engineering, Design and Technology, 20(6), pp. 1482-1498. ISSN 1726-0531

Modak, J P; Sohoni, V V and Aware, H V (1997) Manually powered manufacture of keyed bricks. Building Research & Information, 25(6), pp. 354-364. ISSN 0961-3218

Mollo, L (2015) Influence of cement/sand ratio on behavior of cement mortar. Journal of Engineering, Design and Technology, 13(1), pp. 23-36.

Moon, S and Munira Chowdhury, A (2021) Utilization of prior information in neural network training for improving 28-day concrete strength prediction. Journal of Construction Engineering and Management, 147(5): 2047, ISSN 0733-9364

Muleya, F (2014) Modelling wheeled construction plant performance in clay and sandy terrain: a terramechanics perspective. PhD thesis, Anglia Ruskin University, UK.

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Na, R (2013) Property rights analysis of building material pricing. PhD thesis, University of Hong Kong, Hong Kong.

Nguyen, L D; Nguyen, T K N; Tran, D Q and Villiers, C (2014) Productivity in daytime and nighttime construction of urban sewer systems. Journal of Construction Engineering and Management, 140(7): 04014021, ISSN 0733-9364

Nursyamsi, N; Tarigan, J; Aswin, M; Abu Bakar, B H and Hardjasaputra, H (2024) Structural behaviour of the strengthened reinforced concrete beams using ultra high-performance fibre reinforced concrete layer. Construction Innovation, 24(3), pp. 725-746. ISSN 1471-4175

O'Keeffe, D J; Thomson, D S and Dainty, A R J (2014) An illustration of the development of a strategy for evaluating the design of hospitals within a practice order network. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Ostakh, O; Uzyakova, E; Grechishcheva, N and Kusheeva, V (2021) Ecotoxicological assessment of soil-like mixtures made of drill cuttings. Journal of Engineering, Design and Technology, 19(6), pp. 1433-1450. ISSN 1726-0531

Parameswaran, A and Ranadewa, K A T O (2024) Learning-to-learn sand cone model integrated lean learning framework for construction industry. Smart and Sustainable Built Environment, 13(4), pp. 856-882. ISSN 2046-6099

Peng, J L; Yen, T; Lin, Y; Wu, K L and Chen, W F (1997) Performance of scaffold frame shoring under pattern loads and load paths. Journal of Construction Engineering and Management, 123(2), pp. 138-145. ISSN 0733-9364

Perera, H P; Perera, B A K S and Palihakkara, A D (2023) Financial and economic risk management in coastal land reclamation projects. Construction Innovation, 23(4), pp. 878-897. ISSN 1471-4175

Pham, L T; Nguyen, T; Trinh, T; Nguyen, A; Do, Q; Bui, B and Xiao, J (2023) Development of 3D printers for concrete structures: Mix proportion design approach and laboratory testing. Smart and Sustainable Built Environment, 12(5), pp. 1056-1073. ISSN 2046-6099

Praveen, D and Kunnampalli, J (2024) Evaluating the impacts of anticipated sea level rise, climate change and land use land cover scenarios on the rice crop in Alappuzha, Kerala and strategies to build climate responsive agriculture. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 755-775. ISSN 1759-5916

Puffer, S M; Zadeh, A A and Peng, Y (2024) Awareness of the global sand crisis and sand substitutes in the construction industry in the United States and Canada: A stakeholder analysis. International Journal of Construction Management, 24(4), pp. 454-466. ISSN 1562-3599

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Rambaldi, A N (1992) A regional market model for construction aggregate materials. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Rich, F A (2020) Managing the wear of heavy construction equipment steel track undercarriage by soil sand content. PhD thesis, Indiana State University, USA.

Shahid, M. U.; Thaheem, M. J. and Arshad, H. (2023) Quantification and benchmarking of construction waste and its impact on cost: A case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Shahid, M U; Thaheem, M J and Arshad, H (2023) Quantification and benchmarking of construction waste and its impact on cost: a case of Pakistan. Engineering, Construction and Architectural Management, 30(6), pp. 2304-2333. ISSN 0969-9988

Sharma, A and Sharma, R K (2021) Uplift behaviour of axial granular pile anchor encased with geogrid in cohesionless soil. Journal of Engineering, Design and Technology, 19(2), pp. 588-602. ISSN 1726-0531

Sharma, R (2021) Effect of wastes and admixtures on compressive strength of concrete. Journal of Engineering, Design and Technology, 19(1), pp. 219-244. ISSN 1726-0531

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Sreram, P K and Thomas, A (2021) A framework for identification of critical material waste causes during construction using DEMATEL and social network analysis. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Stefańska, A; Sutkowska, M; Krawczyk, J; Kurcjusz, M; Chudzińska, A; Poćwierz, M and Dixit, S (2025) Ccc2023_possibilities of obtaining energy from aerodynamic phenomena occurring in selected housing estates in warsaw, Poland. International Journal of Construction Management, 25(12), pp. 1463-1476. ISSN 1562-3599

Stella, C; Ceppi, G and D’Appolonia, E (1990) Temporary tunnel support using jet-grouted cylinders. Journal of Construction Engineering and Management, 116(1), pp. 35-53. ISSN 0733-9364

Tayebi Jebeli, M; Asadollahfardi, G and Abbasi Khalil, A (2022) Novel application of micro-nanobubble water for recycling waste foundry sand: Toward green concrete. Journal of Construction Engineering and Management, 148(9): 04022096, ISSN 0733-9364

Tente, P; Misheng'u Mwanaumo, E and Didibhukut Thwala, W (2023) Sources and control measures of crystalline silica dust in a road and building project in Zambia. Journal of Construction Business and Management, 6(1), pp. 43-52. ISSN 2521-0165

Utomo, C and Rahmawati, Y (2020) Agreement options for negotiation on material location decision of housing development. Construction Innovation, 20(2), pp. 209-222. ISSN 1471-4175

Valizadeh Kiamahalleh, M.; Gholampour, A.; Tang, Y. and Ngo, T. D. (2026) Delithiated β-spodumene as a partial cement replacement in waste-based concrete with recycled aggregates and sugarcane fiber. International Journal of Construction Management, 26(10), pp. 2245-2257. ISSN 1562-3599

Van Noortwijk, J M (1996) Optimal maintenance decisions for hydraulic structures under isotropic deterioration. PhD thesis, Delft University of Technology, Netherlands.

Wang, S; Ni, Z; Qu, T; Wang, H and Pan, Q (2022) A novel index to evaluate the workability of conditioned coarse-grained soil for epb shield tunnelling. Journal of Construction Engineering and Management, 148(6): 04022028, ISSN 0733-9364

Wanninayake, S B; Nianthi, R and Dayarathne Banda, O G (2024) Roles and responsibilities of stakeholders involved in local-level flood risk management: A study in the Deduru Oya basin in Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 680-698. ISSN 1759-5916

Yang, F (2022) Ascending the pagoda: A ground-up exploration of the ancient construction methods of dayanta using virtual reality. PhD thesis, Ohio State University, USA.

Younes, B (2013) A framework for invoice management in construction. PhD thesis, University of Alberta, Canada.

Zhang, C; Chen, K; Yang, J; Fu, J; Wang, S and Xie, Y (2022) Reuse of discharged soil from slurry shield tunnel construction as synchronous grouting material. Journal of Construction Engineering and Management, 148(2): 04021193, ISSN 0733-9364

van Tonder, P and Low, M S (2021) The effect of CO loading on the properties of normal concrete vs fly ash concrete. Journal of Engineering, Design and Technology, 19(6), pp. 1472-1487. ISSN 1726-0531