Items with Index Term: replacement

Abbas, M A; Ajayi, S O; Oyegoke, A S and Alaka, H (2024) A cloud-based collaborative ecosystem for the automation of BIM execution plan (BEP). Journal of Engineering, Design and Technology, 22(4), pp. 1306-1324. ISSN 1726-0531

Abdelkader, E M; Moselhi, O; Marzouk, M and Zayed, T (2021) Integrative evolutionary-based method for modeling and optimizing budget assignment of bridge maintenance priorities. Journal of Construction Engineering and Management, 147(9): 04021100, ISSN 0733-9364

Abdul-Aziz, A R and How, Y M (2012) To-be-reclaimed land swap for new highway: The Jelutong expressway case. International Journal of Construction Management, 12(4), pp. 1-16. ISSN 1562-3599

Abisuga, A O; Famakin, I O and Oshodi, O S (2016) Educational building conditions and the health of users. Construction Economics and Building, 16(4), pp. 19-34. ISSN 2204-9029

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Abu Dabous, S and Alkass, S (2008) Decision support method for multi-criteria selection of bridge rehabilitation strategy. Construction Management and Economics, 26(8), pp. 883-893. ISSN 01446193

Abu Samra, S; Ahmed, M; Hammad, A and Zayed, T (2018) Multiobjective framework for managing municipal integrated infrastructure. Journal of Construction Engineering and Management, 144(1): 04017091, ISSN 0733-9364

Abuhishmeh, K S K (2023) Risk assessment of reinforced concrete sewer pipes under external loading and adverse environmental conditions using an adaptive neuro-fuzzy system. PhD thesis, University of Texas at Arlington, USA.

Abusnina, H (2019) Combining engineering and data-driven approaches to model the risk of excavation damage to underground natural gas facilities. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Adah, C A and Ekweani, C P (2025) Career choice of graduating students in built environment courses in Nigeria: A mixed-method study. International Journal of Construction Education and Research, 21(1), pp. 117-138. ISSN 1557-8771

Ahmed, H I (2023) Mechanical behavior, microstructure, and chloride-penetration resistance of glass waste nanopowder magnetic concrete. Journal of Construction Engineering and Management, 149(1): 04022152, ISSN 0733-9364

Al-Gahtani, K; Alsulaihi, I; Ali, M and Marzouk, M (2017) Production of green concrete using recycled waste aggregate and byproducts. Built Environment Project and Asset Management, 7(4), pp. 413-425. ISSN 2044-124X

Al-Ibrahim, A (2006) Optimizing roof maintenance and replacement decisions. PhD thesis, North Carolina State University, USA.

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

AlBughdadi, A J M (2022) Advanced decision support tools for bridge asset management. PhD thesis, Iowa State University, USA.

AlMaian, R Y; Needy, K L; Walsh, K D and Alves, T D C L (2016) A qualitative data analysis for supplier quality-management practices for engineer-procure-construct projects. Journal of Construction Engineering and Management, 142(2): 04015061, ISSN 0733-9364

Alarcón, L F; Rodríguez, A and Mourgues, C (2012) Impact of machine-failure costs on equipment replacement policies: Tunneling company case study. Journal of Construction Engineering and Management, 138(6), pp. 767-774. ISSN 0733-9364

Alemu, S K (2022) Construction time prediction model for public building projects. Engineering, Construction and Architectural Management, 29(5), pp. 2183-2206. ISSN 0969-9988

Alkasisbeh, M R (2018) An integrated decision support framework for life-cycle building asset management. PhD thesis, Western Michigan University, USA.

Allen, S and Hinks, J (1996) Comment: How long should housing last? Some implications of the age and probable life of housing in England. Construction Management and Economics, 14(6), pp. 531-535. ISSN 01446193

Allouche, E N (2001) A decision-support model for selection of a trenchless construction method. PhD thesis, University of Alberta, Canada.

Alsharqawi, M; Abu Dabous, S; Zayed, T and Hamdan, S (2021) Budget optimization of concrete bridge decks under performance-based contract settings. Journal of Construction Engineering and Management, 147(6): 04021040, ISSN 0733-9364

Alshibani, A; El Ghazzawi, Y A; Mohammed, A; Ghaithan, A M and Hassanain, M A (2024) A multi-criteria decision-making model for heavy construction equipment replacement in Saudi Arabia. Journal of Financial Management of Property and Construction, 29(3), pp. 485-511. ISSN 1366-4387

Amoah, C and Nkosazana, H (2022) Effective management strategies for construction contract disputes. International Journal of Building Pathology and Adaptation, 41(6), pp. 70-84. ISSN 23984708

Amorim, Aldo Siervo de (2016) Critical analysis of the economic and environmental feasibility of the civil construction waste recycling process at the municipal level. PhD thesis, Universidade de São Paulo, Brazil.

Amran, M and Onaizi, A (2025) Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: An innovative use of Saudi agro-industrial by-products. International Journal of Building Pathology and Adaptation, 43(4), pp. 591-613. ISSN 2398-4708

Ariaratnam, S T; Lueke, J S and Allouche, E N (1999) Utilization of trenchless construction methods by Canadian municipalities. Journal of Construction Engineering and Management, 125(2), pp. 76-86. ISSN 0733-9364

Arowoiya, V.; Oke, A.; Chan, M. and Adelusi, A. (2026) Benefits of adopting digital twin technology (dtt) in the Nigerian construction industry. International Journal of Construction Management, 26(7), pp. 1134-1148. ISSN 1562-3599

Asiedu, R O (2017) Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(3), pp. 305-316.

Atkinson, E; Spillane, J; Bradley, J and Brooks, T (2022) Challenges in the adoption of mobile information communication technology (m-ICT) in the construction phase of infrastructure projects in the UK. International Journal of Building Pathology and Adaptation, 40(3), pp. 327-344. ISSN 23984708

Aulich, H T (2013) The role of effective communication in the construction industry: A guide for education and health clients. Construction Economics and Building, 13(4), pp. 92-101. ISSN 2204-9029

Bai, Y and Burkett, W R (2006) Rapid bridge replacement: Processes, techniques, and needs for improvements. Journal of Construction Engineering and Management, 132(11), pp. 1139-1147. ISSN 0733-9364

Bai, Y; Burkett, W R and Nash, P T (2006) Lessons learned from an emergency bridge replacement project. Journal of Construction Engineering and Management, 132(4), pp. 338-344. ISSN 0733-9364

Bai, Y; Kim, S H and Burkett, W R (2007) Enhancing the capability of rapid bridge replacement after extreme events. Engineering, Construction and Architectural Management, 14(4), pp. 375-386. ISSN 0969-9988

Balogun, T B (2018) Integrating bridge maintenance life cycle assessments into bridge design for improved sustainable decision making. PhD thesis, University of the West of England, Bristol, UK.

Bansal, S; Choudhary, L; Kalra, M; Dave, N and Sharma, A K (2025) Mechanical and microstructural characteristics of structural concrete containing rca treated with sodium metasilicate. Journal of Engineering, Design and Technology, 23(3), pp. 854-870. ISSN 1726-0531

Berryman, C W; Jensen, W G and Zhu, J (2006) Maximization of fly ash in the manufacture of reinforced concrete pipe. International Journal of Construction Education and Research, 2(3), pp. 209-216. ISSN 1557-8771

Bhurisith, I and Touran, A (2002) Case study of obsolescence and equipment productivity. Journal of Construction Engineering and Management, 128(4), pp. 357-361. ISSN 0733-9364

Bishop, E (2014) The use of Department of Health standards and guidance: effects on, and benefits to, healthcare accommodation. PhD thesis, Loughborough University, UK.

Bogie, J R (1986) Funding approaches to capital outlay building projects in California public school districts: Post-proposition 13. EdD thesis, University of Southern California, USA.

Bon, R (1988) Replacement simulation model: A framework for building portfolio decisions. Construction Management and Economics, 6(2), pp. 149-159. ISSN 01446193

Bowen, P A (1993) A communication-based approach to price modelling and price forecasting in the design phase of the traditional building procurement process in South Africa. Unpublished PhD thesis, University of Port Elizabeth, South Africa.

Broadhurst, S J (2000) Non-man-entry sewer renovation robot characteristics. PhD thesis, Sheffield Hallam University, UK.

Bromilow, F J and Pawsey, M R (1987) Life cycle cost of university buildings. Construction Management and Economics, 5(4), ISSN 01446193

Bulut, M; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2021) Perceived benefits of retrofitted residential secondary glazing: An exploratory Australian study. International Journal of Building Pathology and Adaptation, 39(5), pp. 720-733. ISSN 23984708

Burati, J L; Farrington, J J and Ledbetter, W B (1992) Causes of quality deviations in design and construction. Journal of Construction Engineering and Management, 118(1), pp. 34-49. ISSN 0733-9364

Cao, Y and Yang, A (2025) Spatial syntax analysis on the renewal of the external space of mining heritage buildings: A case study of Zollverein Coal Mine Industrial Complex. Architectural Engineering and Design Management, 21(1), pp. 136-153. ISSN 1745-2007

Casamayor, J; Su, D and Sarshar, M (2015) Extending the lifespan of led-lighting products. Architectural Engineering and Design Management, 11(2), pp. 105-122. ISSN 1745-2007

Cheng, F and Hu, Z (2026) Impact of digital transformation on corporate performance in the construction industry. Journal of Construction Engineering and Management, 152(2): 04025248, ISSN 0733-9364

Cheng, Y (2005) Development of bridge management systems using fuzzy case-based reasoning. PhD thesis, Kansas State University, USA.

Chovichien, V (1981) The discounted cost model and application to acquisition and utilization policies of construction equipment. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Chowdary, B V and Jaglal, D (2023) 3D CAD model reconstruction and fast prototyping of rotational parts: A reverse engineering approach. Journal of Engineering, Design and Technology, 21(5), pp. 1520-1544. ISSN 1726-0531

Chowdhury, R (2009) Life cycle based analysis of various materials used in road construction. PhD thesis, University of Toledo, USA.

Cieraad, F D; Schraven, D F J and de Bruijne, M L C (2018) Investments under pressure: A real options approach to prepare for emergency asylum shelter in a multi actor setting. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Clapp, D; Shuler, S; Nobe, M D; Demiranda, M and Nobe, M E C (2007) Capital equipment acquisition in heavy construction. International Journal of Construction Education and Research, 3(3), pp. 159-178. ISSN 1557-8771

Collier, C A and Jacques, D E (1984) Optimum equipment life by minimum life-cycle costs. Journal of Construction Engineering and Management, 110(2), pp. 248-265. ISSN 0733-9364

Crawley, J; Wade, F and De Wilde, M (2023) Gender and the heat pump transition. Buildings & Cities, 4(1), pp. 948-964. ISSN 2632-6655

Dave, N; Guduru, R; Misra, A K and Sharma, A K (2022) Experimental evaluation of bond behavior in controlled, binary and quaternary concretes developed using scms. Journal of Engineering, Design and Technology, 20(6), pp. 1430-1448. ISSN 1726-0531

Eamon, C; Shinki, K; Wong, K H and Alsendi, A (2025) Assessment of pay item specific case-based reasoning approach for bridge unit cost estimation. Journal of Construction Engineering and Management, 151(12): 04025188, ISSN 0733-9364

Edwards, D J; Holt, G D and Harris, F C (1998) Financial management of construction plant: Conceptualising cost prediction. Journal of Financial Management of Property and Construction, 3(2), pp. 59-74. ISSN 1366-4387

Edwards, D J and Nicholas, J (2001) Telescopic handler machine park prediction using sales trends. Journal of Financial Management of Property and Construction, 6(2), pp. 109-118. ISSN 1366-4387

El Asmar, M; Lotfallah, W; Whited, G and Hanna, A S (2010) Quantitative methods for design-build team selection. Journal of Construction Engineering and Management, 136(8), pp. 904-912. ISSN 0733-9364

Elkadi, Karim (2024) BIM-enabled facility management framework and simulation. PhD thesis, George Mason University, USA.

Elshaboury, N; Attia, T and Marzouk, M (2020) Application of evolutionary optimization algorithms for rehabilitation of water distribution networks. Journal of Construction Engineering and Management, 146(7): 04020069, ISSN 0733-9364

Ertekin, A O (2013) Probabilistic life cycle cost optimization of bridges. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Fadiya, O O; Georgakis, P; Chinyio, E and Akadiri, P (2013) Analysing the perceptions of UK building contractors on the contributors to the cost of construction plant theft. Journal of Financial Management of Property and Construction, 18(2), pp. 128-141. ISSN 1366-4387

Fahy, P (2007) Cross cultural training and the effective integration of the construction supply chain. PhD thesis, University College London, UK.

Fan, Y and Kokko, E (1997) Three-dimensional gaseous transfer within cellular plastic insulation and its consequences. Building Research & Information, 25(1), pp. 25-35. ISSN 0961-3218

Farrington, J J (1987) A methodology to identify and categorize costs of quality deviations in design and construction. PhD thesis, Clemson University, USA.

Feldbauer, R R (2019) Mindful project management: a framework to enhance underperformance managing large hospital builds by incorporating principles adapted from High Reliability Organizations. PhD thesis, University of Liverpool, UK.

Fisher, A D and Robitaille, A M (2011) Replacement of the movable span of the Thames River Bridge: How 19th century technology impacted 21st century construction. Journal of Construction Engineering and Management, 137, pp. 895-900. ISSN 0733-9364

Flood, C and Scott, L (2020) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(1), pp. 51-67. ISSN 23984708

Florius, N A (2021) Decision tool for prioritizing bridge repair or replacement. PhD thesis, University of Texas at Arlington, USA.

Francart, N (2021) Decision support for the implementation of low-carbon measures in the building sector. PhD thesis, KTH Royal Institute of Technology, Sweden.

Geekiyanage, D; Ramachandra, T and Thurairajah, N (2018) A model for early stage estimation of operational expenses (opex) in commercial buildings. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Gorod, A; Hallo, L; Statsenko, L; Nguyen, T and Chileshe, N (2021) Integrating hierarchical and network centric management approaches in construction megaprojects using a holonic methodology. Engineering, Construction and Architectural Management, 28(3), pp. 627-661. ISSN 0969-9988

Grant, A and Ries, R (2013) Impact of building service life models on life cycle assessment. Building Research & Information, 41(2), pp. 168-186. ISSN 0961-3218

Gschösser, F (2011) Environmental assessment of road constructions: Life cycle assessment of Swiss road pavements and an accompanying analysis of construction and maintenance costs. DSc thesis, ETH Zürich, Switzerland.

Guan, Z; Millard, S and Yang, Z (2008) CDIO and the Liverpool Constructionarium. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(2), pp. 77-83. ISSN 17514312

Gunawardena, N D (1990) A methodology for optimising maintenance and replacement of construction equipment. PhD thesis, Loughborough University, UK.

Guyer, R C and Laman, J A (2012) Short-line railroad management system for bridge prioritization. Built Environment Project and Asset Management, 2(1), pp. 25-40. ISSN 2044-124X

Guzman de la Cruz, A L (1998) Cost-performance criteria for seismic retrofitting. PhD thesis, University of Puerto Rico, Mayaguez, Puerto Roco.

Göswein, V; Arehart, J; Phan-Huy, C; Pomponi, F and Habert, G (2022) Barriers and opportunities of fast-growing biobased material use in buildings. Buildings & Cities, 3(1), pp. 745-755. ISSN 2632-6655

Hachem, A A K; Khatib, J M and Ezzedine El Dandachy, M (2025) Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer. International Journal of Building Pathology and Adaptation, 43(4), pp. 732-748. ISSN 2398-4708

Hamdi, I M (1996) Multimedia applications in construction project management: An owner's perspective. PhD thesis, University of Kentucky, USA.

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Haupt, T C and Smallwood, J (2004) HIV and AIDS in SA construction: attitudes and perceptions of workers. Journal of Construction Research, 5(2), pp. 311-327. ISSN 1609-9451

Hedayati, M; Iyer-Raniga, U and Crossin, E (2014) A greenhouse gas assessment of a stadium in Australia. Building Research & Information, 42(5), pp. 602-615. ISSN 0961-3218

Hegab, M; Smith, G R and Salem, O M (2006) Soil penetration modeling in microtunneling projects. Journal of Construction Engineering and Management, 132(6), pp. 598-605. ISSN 0733-9364

Hendrickson, Thomas Peter (2013) Carbon and water resource management for water distribution systems. PhD thesis, University of California, USA.

Hoque, M I; Hasan, M and Datta, S D (2026) Undrained shear strength of soft clay reinforced with encapsulated stone dust columns. International Journal of Building Pathology and Adaptation, 44(1), pp. 1-14. ISSN 2398-4708

Hsu, S-C (2013) A complexity-based approach to intra-organizational team selection. PhD thesis, University of Maryland, College Park, USA.

Hu, M (2020) Life-cycle environmental assessment of energy-retrofit strategies on a campus scale. Building Research & Information, 48(6), pp. 659-680. ISSN 0961-3218

Hussin, M H; Othman, N H and Wan Ibrahim, M H (2019) Carbonation of concrete containing mussel (Perna viridis) shell ash. Journal of Engineering, Design and Technology, 17(5), pp. 904-928. ISSN 1726-0531

Huuhka, S (2023) Understanding demolition. Buildings & Cities, 4(1), pp. 927-937. ISSN 2632-6655

Huuhka, S; Moisio, M; Salmio, E; Köliö, A and Lahdensivu, J (2023) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings & Cities, 4(1), pp. 212-228. ISSN 2632-6655

Ioannou, P G (1989) Dynamic probabilistic decision processes. Journal of Construction Engineering and Management, 115(2), pp. 237-257. ISSN 0733-9364

Ioannou, P G (2019) Friedman's bidding model: Errors and corrections. Journal of Construction Engineering and Management, 145(10): 04019058, ISSN 0733-9364

Ismail, Z A (2019) Developing a maintenance index framework for heritage concrete buildings. International Journal of Building Pathology and Adaptation, 37(5), pp. 510-527. ISSN 23984708

Itard, L and Klunder, G (2007) Comparing environmental impacts of renovated housing stock with new construction. Building Research & Information, 35(3), pp. 252-267. ISSN 0961-3218

Itoya, E (2012) Carbon emissions evaluation for highway management and maintenance. EngD thesis, Loughborough University, UK.

Jaafari, A and Mateffy, V K (1990) Realistic model for equipment replacement. Journal of Construction Engineering and Management, 116(3), pp. 514-532. ISSN 0733-9364

Jalaei, F; Zhang, J; McNeil- Ayuk, N and McLeod, C (2025) Environmental life cycle assessment (LCA) for design of climate-resilient bridges-a comprehensive review and a case study. International Journal of Construction Management, 25(1), pp. 99-114. ISSN 1562-3599

Jalaei, F; Zhang, J; McNeil- Ayuk, N and McLeod, C (2025) Environmental life cycle assessment (LCA) for design of climate-resilient bridges: A comprehensive review and a case study. International Journal of Construction Management, 25(1), pp. 99-114. ISSN 1562-3599

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Modeling framework to quantify and gauge project cost risks due to construction material price volatilities using predictive probabilistic deep-learning algorithms and stochastic risk modeling. Journal of Construction Engineering and Management, 151(7): 04025071, ISSN 0733-9364

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Risk allocation model for price escalations in construction projects: Integrating bargaining game theory and probabilistic Bayesian modeling. Journal of Construction Engineering and Management, 151(9): 04025134, ISSN 0733-9364

Jiang, A and Zhu, Y (2011) Life cycle cost analysis of residential grid-connected solar photovoltaic systems in Florida. International Journal of Construction Education and Research, 7(1), pp. 71-81. ISSN 1557-8771

Johansson, C (2001) A modularization approach to housing. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Johnstone, I M (2001) Periodic refurbishment and reductions in national costs to sustain dwelling services. Construction Management and Economics, 19(1), pp. 97-108. ISSN 01446193

Jones, S H and Armanios, D E (2020) Methodological framework and feasibility study to assess social equity impacts of the built environment. Journal of Construction Engineering and Management, 146(11): 05020016, ISSN 0733-9364

Kalutara, P; Zhang, G; Setunge, S and Wakefield, R (2017) Factors that influence Australian community buildings' sustainable management. Engineering, Construction and Architectural Management, 24(1), pp. 94-117. ISSN 0969-9988

Kamat, K J (2003) Decision making and negotiation: Establishing social order on a construction site. PhD thesis, University of Birmingham, UK.

Karami, S (2008) Using by-product industrial materials to replace all cement in construction products. PhD thesis, Coventry University, UK.

Karri, S K; Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(1), pp. 42-59. ISSN 1726-0531

Kashiwagi, D T and Mayo, R E (2001) Best value procurement in construction using artificial intelligence. Journal of Construction Procurement, 7(2), pp. 42-59. ISSN 1358-9180

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Kim, Yong-Su (1994) The development and application of a probabilistic model for risk analysis of life cycle cost predictions: For apartment buildings constructed by the Korea National Housing Corporation in Seoul, Korea. PhD thesis, University of New South Wales, Australia.

Kisi, K P; Mani, N; Rojas, E M and Foster, E T (2017) Optimal productivity in labor-intensive construction operations: Pilot study. Journal of Construction Engineering and Management, 143(3): 04016107, ISSN 0733-9364

Kisilewicz, T (2007) Computer simulation in solar architecture design. Architectural Engineering and Design Management, 3(2), pp. 106-123. ISSN 1745-2007

Kokkarinen, N; Shaw, A; Cullen, J; Pedrola, M O; Mason, A and Al-Shamma’a, A (2014) Investigation of audible carbon monoxide alarm ownership : Case study. Smart and Sustainable Built Environment, 3(1), pp. 72-86. ISSN 2046-6099

Koo, D H and Ariaratnam, S T (2008) Application of a sustainability model for assessing water main replacement options. Journal of Construction Engineering and Management, 134(8), pp. 563-574. ISSN 0733-9364

Laefer, D F and Manke, J P (2008) Building reuse assessment for sustainable urban reconstruction. Journal of Construction Engineering and Management, 134(3), pp. 217-227. ISSN 0733-9364

Langevine, R (2006) A decision support system for the maintenance management of buildings. PhD thesis, University of Alberta, Canada.

Laveglia, A; Trezza, M A and Rahhal, V F (2022) Does the colour of the waste glass affect their efficiency as supplementary cementitious material? International Journal of Construction Management, 22(16), pp. 3098-3108. ISSN 1562-3599

Leblanc, H (2012) Knowledge mapping and process modelling to develop a sustainability-related knowledge management strategy for Scottish housing association planned works. PhD thesis, Glasgow Caledonian University, UK.

Leblanc, H and Thomson, C (2012) Paradigm interplay to develop a sustainability related knowledge management strategy. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Leblanc, H; Thomson, C and Cameron, I (2015) Developing a sustainability KM strategy for HA planned works. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 168(2), pp. 49-65. ISSN 17514304

Lee, E B; Lee, H and Ibbs, C W (2007) Productivity aspects of urban freeway rehabilitation with accelerated construction. Journal of Construction Engineering and Management, 133(10), pp. 798-806. ISSN 0733-9364

Lee, J C (2010) Evaluating the sustainability of construction with recycled materials. PhD thesis, University of Wisconsin - Madison, USA.

Lee, J S (2021) Life cycle costing for exterior materials on building façade. Journal of Construction Engineering and Management, 147(7): 2068, ISSN 0733-9364

Lim, T; Porras-Alvarado, J D and Zhang, Z (2019) Pricing of highway infrastructure for transportation asset management. Built Environment Project and Asset Management, 9(1), pp. 64-79. ISSN 2044-124X

Lin, L-k (1994) Improving the productivity of roadway construction job sites with a portable expert system. PhD thesis, University of Utah, USA.

Lippiatt, B C (1999) Selecting cost-effective green building products: Bees approach. Journal of Construction Engineering and Management, 125(6), pp. 448-455. ISSN 0733-9364

Liu, J and Li, G (2021) Comprehensive benefit evaluation on urban village micro-transformation based on extension matter-element model. International Journal of Construction Management, 21(5), pp. 524-537. ISSN 1562-3599

Lostuvali, B; Alves, T C L and Modrich, R U (2014) Learning from the cathedral hill hospital project during the design and preconstruction phases. International Journal of Construction Education and Research, 10(3), pp. 160-180. ISSN 1557-8771

Lowe, J (2023) Technical and organisational change in UK construction. Journal of Construction Business and Management, 6(2), pp. 50-61. ISSN 2521-0165

Loy, W. W.; Belek Fialho Teixeira, M. and Franzè, A. P. (2026) Ar-guided modular robotic bricklaying: A proof-of-concept system for human-in-the-loop construction workflows. Construction Innovation, ISSN 1471-4175

Lu, H; Behbahani, S; Azimi, M; Matthews, J C; Han, S and Iseley, T (2020) Trenchless construction technologies for oil and gas pipelines: State-of-the-art review. Journal of Construction Engineering and Management, 146(6): 03120001, ISSN 0733-9364

Lu, Y; Scott, A; Kim, J; Curi, C B; McCarty, J; Pardy, A; Rysanek, A; Girling, C and Kellett, R (2021) Integration of an energy-economy model with an urban energy model. Buildings & Cities, 2(1), pp. 114-133. ISSN 2632-6655

Lucko, G (2011) Modeling the residual market value of construction equipment under changed economic conditions. Journal of Construction Engineering and Management, 137, pp. 806-816. ISSN 0733-9364

Lützkendorf, T and Balouktsi, M (2022) Embodied carbon emissions in buildings: Explanations, interpretations, recommendations. Buildings & Cities, 3(1), pp. 964-973. ISSN 2632-6655

Maby, C and Gwilliam, J (2022) Integrating energy efficiency into private home repair, maintenance and improvement practice in England and Wales. Building Research & Information, 50(4), pp. 424-437. ISSN 0961-3218

Maby, C M (2019) Enabling the integration of energy improvements into mainstream home repair, maintenance and improvement practice in the UK. PhD thesis, Cardiff University, UK.

Mackenzie, D I (2010) A review of project controls in the UK and methodologies to improve the processes. DProf thesis, Teesside University, UK.

Mane, K M; Kulkarni, D K and Prakash, K B (2021) Prediction of shear strength of concrete produced by using pozzolanic materials and partly replacing nfa by MS using ann. Journal of Engineering, Design and Technology, 19(2), pp. 578-587. ISSN 1726-0531

Mani, N (2015) A framework for estimating labor productivity frontiers. PhD thesis, University of Nebraska - Lincoln, USA.

Marantzidis, I and Gidado, K (2011) The maximisation of the use of reclaimed asphalt pavement (RAP) in the Greek construction industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Marey Madi, H A (2024) Sustainability assessment of using green concrete materials for residential buildings in Egypt. PhD thesis, Debreceni Egyetem, Hungary.

Marzouk, M; ElSharkawy, M; Elsayed, P and Eissa, A (2020) Resolving deterioration of heritage building elements using an expert system. International Journal of Building Pathology and Adaptation, 38(5), pp. 721-735. ISSN 23984708

Mater, Y; Kamel, M; Karam, A and Bakhoum, E (2023) Ann-python prediction model for the compressive strength of green concrete. Construction Innovation, 23(2), pp. 340-359. ISSN 1471-4175

Matthews, J C (2010) Integrated, multi-attribute decision support system for the evaluation of underground utility construction methods. PhD thesis, Louisiana Tech University, USA.

McAleenan, P; McAleenan, C; Ayers, G; Behm, M and Beachem, Z (2019) The ethics deficit in occupational safety and health monitoring technologies. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 93-100. ISSN 17514304

Meikle, J L and Connaughton, J N (1994) How long should housing last? Some implications of the age and probable life of housing in England. Construction Management and Economics, 12(4), pp. 315-321. ISSN 01446193

Mitchell Jr., Z W (1998) A statistical analysis of construction equipment repair costs using field data and the cumulative cost model. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Mitchell Jr., Zane Windsor (1998) A statistical analysis of construction equipment repair costs using field data & the cumulative cost model. PhD thesis, Virginia Tech, USA.

Mohammadi, P; Asgari, S; Rashidi, A and Alder, R (2025) Culvert inspection framework using hybrid xgboost and risk-based prioritization: Utah case study. Journal of Construction Engineering and Management, 151(6): 04025052, ISSN 0733-9364

Mohammadpour, A (2014) Retrofitting healthcare facilities to enhance patient safety and energy efficiency. PhD thesis, Pennsylvania State University, USA.

Mohd Zaini, F; Kwong, Q J and Jack, L B (2021) Water efficiency in Malaysian commercial buildings: A green initiative and cost–benefit approach. International Journal of Building Pathology and Adaptation, 39(5), pp. 702-719. ISSN 23984708

Moisio, M; Salmio, E; Kaasalainen, T; Huuhka, S; Räsänen, A; Lahdensivu, J; Leppänen, M and Kuula, P (2024) Towards urban LCA: examining densification alternatives for a residential neighbourhood. Buildings & Cities, 5(1), pp. 581-600. ISSN 2632-6655

Monteiro, Nathalie Barbosa Reis (2021) Life cycle management: Foundations for the application of circular economy in concrete industries of civil construction. PhD thesis, Universidade Federal do Piauí, Brazil.

Moore, D R; Paterson, G and Martinez, R S (2004) Sustainable communities: A proposal linking the management of forestation and agricultural waste with the development of recyclable housing. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Morgado, J; Flores-Colen, I; De Brito, J and Silva, A (2017) Maintenance planning of pitched roofs in current buildings. Journal of Construction Engineering and Management, 143(7): 05017010, ISSN 0733-9364

Muga, H E (2009) An integrated framework for assessing the sustainability of components that make up the built environment. PhD thesis, Michigan Technological University, USA.

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Nabil, A (2016) P.A.L.M. - physical asset lifecycle modelling in the healthcare sector. PhD thesis, University College London, UK.

Nath, A D; Hoque, M I; Datta, S D and Shahriar, F (2024) Various recycled steel fiber effect on mechanical properties of recycled aggregate concrete. International Journal of Building Pathology and Adaptation, 42(3), pp. 448-468. ISSN 23984708

Navon, R and Maor, D (1995) Equipment replacement and optimal size of a civil engineering fleet. Construction Management and Economics, 13(2), pp. 173-183. ISSN 01446193

Ndekugri, I; Smith, N and Hughes, W P (2007) The engineer under FIDIC's conditions of contract for construction. Construction Management and Economics, 25(7), pp. 791-799. ISSN 1466433X

Ndukwe, Chigozie Victor (2023) Impact of globalisation on the construction supply chain: Challenges and responses in Victoria. PhD thesis, University of Melbourne, Australia.

Neely, E S and Neathammer, R (1991) Life-cycle maintenance costs by facility use. Journal of Construction Engineering and Management, 117(2), pp. 310-320. ISSN 0733-9364

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Odeyinka, H A (2000) An evaluation of the use of insurance in managing construction risks. Construction Management and Economics, 18(5), pp. 519-524. ISSN 01446193

Ofosu, K (2010) An integrated approach to transportation infrastructure management. PhD thesis, Florida State University, USA.

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Onsarigo, L M (2016) Cost comparison of horizontal auger boring and open-cut construction methods for culvert installations. PhD thesis, Indiana State University, USA.

Onturk, K; Firat, S; Yilmaz, G and Khatib, J (2022) Waste utilization to enhance performance of road subbase fill. Journal of Engineering, Design and Technology, 20(2), pp. 455-474. ISSN 1726-0531

Panayiotou, A (2017) Infrastructure as a financial asset class. PhD thesis, University of London, University College London, UK.

Park, T i (2009) A comprehensive asset management system for sewer infrastructures. PhD thesis, Pennsylvania State University, USA.

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Pieterse, E I (2024) A cost model to improve short-term underinsurance of residential buildings in South Africa. PhD thesis, University of Pretoria, South Africa.

Pons, O; Casanovas-Rubio, M M; Armengou, J and De La Fuente, A (2021) Sustainability-driven decision-making model: Case study of fiber-reinforced concrete foundation piles. Journal of Construction Engineering and Management, 147(10): 04021116, ISSN 0733-9364

Rajagopalan, G (2019) Durability of alumina silicate concrete based on slag/fly ash blends against corrosion. Engineering, Construction and Architectural Management, 26(8), pp. 1641-1651. ISSN 0969-9988

Rasheed, U; Ordaz, C; Xu, X; Hu, Y; Li, S; Sutton, T and Cai, J (2025) Understanding the impact of teleoperation technology on the construction industry: Adoption dynamics, workforce perception, and the role of broader workforce participation. Journal of Construction Engineering and Management, 151(7): 04025085, ISSN 0733-9364

Rauf, A; Shafiq, M T; Khalfan, M M A and Ulhaq, I (2024) Sustainable water management in construction: Life-cycle embodied water assessment of residential buildings. Built Environment Project and Asset Management, 14(5), pp. 682-696. ISSN 2044-124X

Rautela, P; Chandra Joshi, G and Bhaisora, B (2011) Seismic vulnerability of the health infrastructure in the Himalayan township of Mussoorie, Uttarakhand, India. International Journal of Disaster Resilience in the Built Environment, 2(3), pp. 200-209. ISSN 1759-5916

Reid, J S (2019) Evaluating the impact of using agile methodologies in heavy-civil construction. DEng thesis, George Washington University, USA.

Roca-Puigròs, M; Billy, R G; Gerber, A; Wäger, P and Müller, D B (2020) Pathways toward a carbon-neutral Swiss residential building stock. Buildings & Cities, 1(1), pp. 579-593. ISSN 2632-6655

Rodionova, A (2022) Robust and reliable building renovation strategies for environmental and economic performance. DSc thesis, ETH Zürich, Switzerland.

Ruokamo, E; Tikkanen, T; Lukkarinen, J and Karhinen, S (2026) Energy retrofits in shared ownership: Exploring motivations in Finnish housing companies. Building Research & Information, 54(3), pp. 289-305. ISSN 0961-3218

Saad, I M H and Hancher, D E (1998) Multimedia for construction project management: Project navigator. Journal of Construction Engineering and Management, 124(1), pp. 82-89. ISSN 0733-9364

Sahu, V; Attri, R; Gupta, P and Yadav, R (2020) Development of eco friendly brick using water treatment plant sludge and processed tea waste. Journal of Engineering, Design and Technology, 18(3), pp. 727-738. ISSN 1726-0531

Salman, B and Gursoy, B (2022) Markov chain pavement deterioration prediction models for local street networks. Built Environment Project and Asset Management, 12(6), pp. 853-870. ISSN 2044-124X

Salvado, F; Almeida, N and Vale e Azevedo, A (2020) Aligning financial and functional equivalent depreciations rates of building assets. Engineering, Construction and Architectural Management, 27(2), pp. 441-457. ISSN 0969-9988

Salvado, F; de Almeida, N M and Azevedo, Á V E (2019) Historical analysis of the economic life-cycle performance of public school buildings. Building Research & Information, 47(7), pp. 813-832. ISSN 0961-3218

Sampson Mamphweli, N and Leroy Meyer, E (2013) Performance monitoring system for a biomass gasifier. Journal of Engineering, Design and Technology, 11(1), pp. 7-18. ISSN 1726-0531

Sanoubar, S (2022) Temporal and spatial considerations in maintenance planning. PhD thesis, University of Pittsburgh, USA.

Sayed Zayed, N.; Badawy Abu-Sena, A. B.; Attia, T. M. and Ahmed, A. (2026) Integrating recycled materials in road construction: A cost-effective and sustainable approach. International Journal of Construction Management, 26(7), pp. 1222-1238. ISSN 1562-3599

Schexnayder, C J J (1980) Heavy construction equipment replacement economics. PhD thesis, Purdue University, USA.

Schmidt, M; Crawford, R H and Warren-Myers, G (2020) Integrating life-cycle GHG emissions into a building's economic evaluation. Buildings & Cities, 1(1), pp. 361-378. ISSN 2632-6655

Schnabel, J J and Martin, R E (1983) Parking garage supported on structural fill. Journal of Construction Engineering and Management, 109(3), pp. 286-296. ISSN 0733-9364

Sciulli, G; Rizzo, P; Kurlander, J and Brozik, B (2025) A comparative analysis of three methodological frameworks for bridge asset management. Journal of Construction Engineering and Management, 151(5): 04025029, ISSN 0733-9364

Scognamiglio, A (2014) Essays in labor economics and political economy. PhD thesis, Massachusetts Institute of Technology, USA.

Senaratne, S; Mirza, O; Lambrousis, G and Fernandez-Soncini, A (2018) Structural applicability of steel fibre-recycled aggregate concrete in construction. Journal of Engineering, Design and Technology, 16(6), pp. 959-972. ISSN 1726-0531

Shapira, A (1999) Contemporary trends in formwork standards: a case study. Journal of Construction Engineering and Management, 125(2), pp. 69-75. ISSN 0733-9364

Shash, A A (2005) Financial analysis for replacement of construction equipment in Saudi Arabia. Construction Economics and Building, 5(1), pp. 16-22. ISSN 2204-9029

Shekhawat, P; Sharma, G and Singh, R M (2020) Durability analysis of eggshell powder–flyash geopolymer composite subjected to wetting–drying cycles. Journal of Engineering, Design and Technology, 18(6), pp. 2043-2060. ISSN 1726-0531

Shepley, M M; Rybkowski, Z; Aliber, J and Lange, C (2012) Ambulatory infusion suite: Pre- and post-occupancy evaluation. Building Research & Information, 40(6), pp. 700-712. ISSN 0961-3218

Sheth, A and Sarkar, D (2020) Socio-economic feasibility analysis for sustainable mass rapid transit project in Western India. Journal of Construction in Developing Countries, 25(2), pp. 129-151. ISSN 1823-6499

Shields, B A (2018) Parallel machine replacement: an analysis in construction industry with considerations of horizon uncertainty, multi-purpose machines and transportation. PhD thesis, University of Tennessee, USA.

Shohet, I M and Paciuk, M (2004) Service life prediction of exterior cladding components under standard conditions. Construction Management and Economics, 22(10), pp. 1081-1090. ISSN 01446193

Shohet, I M and Puterman, M (2004) Flat roofing systems: Towards integrated techno-economic analysis. Building Research & Information, 32(2), pp. 165-173. ISSN 0961-3218

Short, C A; Noakes, C J; Gilkeson, C A and Fair, A (2014) Functional recovery of a resilient hospital type. Building Research & Information, 42(6), pp. 657-684. ISSN 0961-3218

Singh, A (2011) Bayesian analysis for causes of failure at a water utility. Built Environment Project and Asset Management, 1(2), pp. 195-210. ISSN 2044-124X

Singh, A and Adachi, S (2013) Bathtub curves and pipe prioritization based on failure rate. Built Environment Project and Asset Management, 3(1), pp. 105-122. ISSN 2044-124X

Singh, A; Thanu, H P and Deepak, M D (2025) Energy-saving strategies to convert existing campus to smart campus: a conservative method analysis. International Journal of Construction Management, 25(6), pp. 718-727. ISSN 1562-3599

Smith, G and Ceranic, B (2008) Spatial layout planning in sub-surface rail station design for effective fire evacuation. Architectural Engineering and Design Management, 4(2), pp. 99-120. ISSN 1745-2007

Sohn, T (2009) Determining durations for right-of-way acquisition and utility adjustment on highway projects. PhD thesis, University of Texas at Austin, USA.

Soleimani, N (2022) Earthquake risk to civil infrastructure systems. PhD thesis, University of Delaware, USA.

Stanic, N (2016) Assessment methods for structural and hydraulic properties of concrete sewer pipes. PhD thesis, Delft University of Technology, Netherlands.

Stankos, M A (2020) The nature of evidence utilized in healthcare architectural design decisions at five Midwestern critical access hospitals. PhD thesis, University of Missouri - Columbia, USA.

Suhomlinova, O O (1996) Organizational transformation in the post-Soviet economy: The case of the Russian construction industry, 1985-1993. PhD thesis, Duke University, USA.

Suárez, J L; Gosselin, L and Lehoux, N (2023) Analysing value creation in social housing construction in remote communities: application to nunavik (Canada). Built Environment Project and Asset Management, 13(4), pp. 493-508. ISSN 2044-124X

Syachrani, S (2010) Advanced sewer asset management using dynamic deterioration models. PhD thesis, Oklahoma State University, USA.

Sällström Eriksson, L and Lidelöw, S (2025) Maintaining or replacing a building's windows: A comparative life cycle study. International Journal of Building Pathology and Adaptation, 43(4), pp. 766-786. ISSN 2398-4708

Taillandier, F; Sauce, G and Bonetto, R (2011) Method and tools for building maintenance plan arbitration. Engineering, Construction and Architectural Management, 18(4), pp. 343-362. ISSN 0969-9988

Tangwe, S and Simon, M (2019) Quantification of the viability of residential air source heat pump water heaters as potential replacement for geysers in South Africa. Journal of Engineering, Design and Technology, 17(2), pp. 456-470. ISSN 1726-0531

Tavakoli, A; Taye, E D and Erktin, M (1989) Equipment policy of top 400 contractors: A survey. Journal of Construction Engineering and Management, 115(2), pp. 317-329. ISSN 0733-9364

Tayebi Jebeli, M; Asadollahfardi, G and Abbasi Khalil, A (2022) Novel application of micro-nanobubble water for recycling waste foundry sand: Toward green concrete. Journal of Construction Engineering and Management, 148(9): 04022096, ISSN 0733-9364

Teo, P; Gajanayake, A; Jayasuriya, S; Izaddoost, A; Perera, T; Naderpajouh, N and Wong, P S P (2022) Application of a bottom-up approach to estimate economic impacts of building maintenance projects: Cladding rectification program in Australia. Engineering, Construction and Architectural Management, 29(1), pp. 333-353. ISSN 0969-9988

Thomas, L; Woods, A; Powles, R; Kalali, P and Wilkinson, S (2022) Residential geothermal air-conditioning: Inhabitants' comfort, behaviour and energy use. Buildings & Cities, 3(1), pp. 226-249. ISSN 2632-6655

Thomsen, A and Van Der Flier, K (2009) Replacement or renovation of dwellings: The relevance of a more sustainable approach. Building Research & Information, 37(5-6), pp. 649-659. ISSN 0961-3218

Tien, I (2014) Bayesian network methods for modeling and reliability assessment of infrastructure systems. PhD thesis, University of California, Berkeley, USA.

Tobolski, M J (2010) Improving the design and performance of concrete bridges in seismic regions. PhD thesis, University of California, San Diego, USA.

Toma, H M; Abdeen, A H and Ibrahim, A (2025) Predicting construction equipment resale price: Machine learning model. Engineering, Construction and Architectural Management, 32(5), pp. 3453-3464. ISSN 0969-9988

Tong, T K L; Tam, C M and Chan, A P C (2001) Genetic algorithm optimization in building portfolio management. Construction Management and Economics, 19(6), pp. 601-609. ISSN 01446193

Treloar, G J; Love, P E D and Crawford, R H (2004) Hybrid life-cycle inventory for road construction and use. Journal of Construction Engineering and Management, 130(1), pp. 43-49. ISSN 0733-9364

Tsai, I T (2007) Default and renegotiation: Financial structure and incentive in public-private partnership contracts. PhD thesis, Massachusetts Institute of Technology, USA.

Tsimberdonis, A I and Murphree, E L (1994) Equipment management through operational failure costs. Journal of Construction Engineering and Management, 120(3), pp. 522-535. ISSN 0733-9364

Valizadeh Kiamahalleh, M.; Gholampour, A.; Tang, Y. and Ngo, T. D. (2026) Delithiated β-spodumene as a partial cement replacement in waste-based concrete with recycled aggregates and sugarcane fiber. International Journal of Construction Management, 26(10), pp. 2245-2257. ISSN 1562-3599

Vilasini, N (2014) Generating value in alliance contracts through the lean concept. PhD thesis, Auckland University of Technology, New Zealand.

Vilasini, N; Neitzert, T and Rotimi, J (2014) Developing and evaluating a framework for process improvement in an alliance project: A New Zealand case study. Construction Management and Economics, 32(6), pp. 625-640. ISSN 01446193

Vorster, M C and Sears, G A (1987) Model for retiring, replacing, or reassigning construction equipment. Journal of Construction Engineering and Management, 113(1), pp. 125-137. ISSN 0733-9364

Waldman, B; Huang, M and Simonen, K (2020) Embodied carbon in construction materials: A framework for quantifying data quality in epds. Buildings & Cities, 1(1), pp. 625-636. ISSN 2632-6655

Wang, T (2022) Motivating management: evidence from construction project teams. PhD thesis, University of Hong Kong, Hong Kong.

Weerasinghe, A S; Ramachandra, T and Nawarathna, A (2019) Effects of green retrofits: A case of industrial manufacturing buildings in Sri Lanka. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Wenchi, S; Wang, J; Wang, X and Chong, H Y (2015) An application of value stream mapping for turnaround maintenance in oil and gas industry: Case study and lessions learned. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Wijnia, Y C (2016) Processing risk in asset management: Exploring the boundaries of risk based optimization under uncertainty for an energy infrastructure asset manager. PhD thesis, Delft University of Technology, Netherlands.

Willoughby, K A (1999) Modelling assistance for project procurement and disposal decisions. PhD thesis, University of Calgary, Canada.

Wise, F; Moncaster, A and Jones, D (2021) Rethinking retrofit of residential heritage buildings. Buildings & Cities, 2(1), pp. 495-517. ISSN 2632-6655

Wu, Z.; Park, A.; Awada, M. and Assaad, R. H. (2026) School building conditions and chronic absenteeism within socioeconomic contexts: A component-level statistical analysis in New York state. Engineering, Construction and Architectural Management, 33(15), pp. 432-457. ISSN 0969-9988

Yari, N (2018) New model for bridge management system (bms): Bridge repair priority ranking system (brprs), case based reasoning for bridge deterioration, cost optimization, and preservation strategy. PhD thesis, University of New Hampshire, USA.

Yeung, D and Skitmore, M (2012) A method for systematically pooling data in very early stage construction price forecasting. Construction Management and Economics, 30(11), pp. 929-939. ISSN 1466433X

Yu, H; Deng, X and Zhang, N (2025) To what extent can smart contracts replace traditional contracts in construction project? Engineering, Construction and Architectural Management, 32(3), pp. 1393-1410. ISSN 0969-9988

Zaferanchi, M and Sozer, H (2024) Effectiveness of interventions to convert the energy consumption of an educational building to zero energy. International Journal of Building Pathology and Adaptation, 42(4), pp. 485-509. ISSN 23984708

Zhang, J.; Saberian, M.; Roychand, R.; Li, J.; Li, C. Q.; Zhang, G. and Robert, D. (2026) Carbon footprint reduction in concrete using spent coffee grounds biochar: A life cycle perspective. International Journal of Construction Management, 26(10), pp. 2137-2153. ISSN 1562-3599

Zhang, C; Zayed, T and Hammad, A (2008) Resource management of bridge deck rehabilitation: Jacques cartier bridge case study. Journal of Construction Engineering and Management, 134(5), pp. 311-319. ISSN 0733-9364

Zhu, W; Li, J; Shen, K and Li, X (2025) Carbon dioxide emission reduction assessments of recycled aggregate concrete applications for infrastructure by incorporating vegetation carbon sink. Journal of Construction Engineering and Management, 151(9): 04025132, ISSN 0733-9364

de Vries, J (2023) A corrective justice account of building authority liability in Canadian negligence law. PhD thesis, University of Western Ontario, Canada.

van den Boomen, M (2020) Replacement optimisation for public infrastructure assets: Quantitative optimisation modelling taking typical public infrastructure related features into account. PhD thesis, Delft University of Technology, Netherlands.

van den Boomen, M; Leontaris, G and Wolfert, A R M (2019) Replacement optimization of ageing infrastructure under differential inflation. Construction Management and Economics, 37(11), pp. 659-674. ISSN 01446193

van den Boomen, M; Spaan, M T J; Schoenmaker, R and Wolfert, A R M (2019) Untangling decision tree and real options analyses: A public infrastructure case study dealing with political decisions, structural integrity and price uncertainty. Construction Management and Economics, 37(1), pp. 24-43. ISSN 01446193

van den Boomen, M; Spaan, M T J; Shang, Y and Wolfert, A R M (2020) Infrastructure maintenance and replacement optimization under multiple uncertainties and managerial flexibility. Construction Management and Economics, 38(1), pp. 91-107. ISSN 01446193