Items with Index Term: renovation

Abdullahi, I (2000) Development of a funding model for allocating capital grants to the federal universities in Nigeria. PhD thesis, Abertay University, UK.

Acre, F and Wyckmans, A (2015) The impact of dwelling renovation on spatial quality: The case of the Arlequin neighbourhood in Grenoble, France. Smart and Sustainable Built Environment, 4(3), pp. 268-309. ISSN 2046-6099

Ade-Ojo, O C (2022) Awareness of the LEED requirements for green housing development among built-environment professionals in Nigeria. Built Environment Project and Asset Management, 12(4), pp. 521-536. ISSN 2044-124X

Adewunmi, Y; Famuyiwa, F and Harrison, E (2009) Post occupancy evaluation of facilities in Nigerian private universities: A case study. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ahmad, A G B (1994) Conservation of British colonial buildings built between 1800 and 1930 in Malaysia. PhD thesis, University of Sheffield, UK.

Aksözen, M; Hassler, U and Kohler, N (2017) Reconstitution of the dynamics of an urban building stock. Building Research & Information, 45(3), pp. 239-258. ISSN 0961-3218

Aksözen, M; Hassler, U; Rivallain, M and Kohler, N (2017) Mortality analysis of an urban building stock. Building Research & Information, 45(3), pp. 259-277. ISSN 0961-3218

Aktas, C B (2011) Impact of product lifetime on life cycle assessment results. PhD thesis, University of Pittsburgh, USA.

Alaux, N; Kulmer, V; Vogel, J and Passer, A (2025) Preserving buildings: Emission reductions from circular economy strategies in Austria. Buildings & Cities, 6(1), pp. 881-898. ISSN 2632-6655

Alhawamdeh, M (2020) An interpretivist approach for the development of a behavioural framework to support the adoption of waste minimisation behaviour of contractors: the case study of Jordan. PhD thesis, University of Salford, UK.

Alotaibi, M; El-Rayes, K and Altuwaim, A (2021) Optimizing the renovation scheduling of leased residential buildings to minimize total project cost. Journal of Construction Engineering and Management, 147(7): 2063, ISSN 0733-9364

Amoah, C and Pretorius, L (2020) Evaluation of the impact of risk management on project performance in small construction firms in South Africa: The case study of construction systems. Journal of Engineering, Design and Technology, 18(3), pp. 611-634. ISSN 1726-0531

Amorocho, J A P and Hartmann, T (2020) Decision-making process to select energy-efficient renovation alternatives for residential buildings: Two case studies. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Anagnostopoulos, I (2018) Generating as-is BIMs of existing buildings: from planar segments to spaces. PhD thesis, University of Cambridge, UK.

Andersson, R; Buser, M and Bosch, P (2019) Improving renovation waste management in Sweden: The role of the demolition company. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Arai, K and Morimoto, E (2020) Renovation of the Japanese construction industry: Evaluation of i-Construction from the perspective of construction management. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Arditi, D; Khisty, C J and Yasamis, F (1997) Incentive/disincentive provisions in highway contracts. Journal of Construction Engineering and Management, 123(3), pp. 302-307. ISSN 0733-9364

Ardron, T G and Allwood, J M (2025) Exploring time and cost optimization in energy retrofit programmes of traditionally constructed, owner-occupied UK dwellings. Building Research & Information, 53(3), pp. 397-415. ISSN 0961-3218

Baienat, S. and Iordanova, I. (2026) Quantifying building adaptability and circular performance through BIM: The adaptation intensity index (AII), circular adaptability performance (CAP), and digital adaptability passport (DAP). Smart and Sustainable Built Environment, pp. 1-22. ISSN 2046-6099

Ball, M (1987) Economic change in the British construction industry. PhD thesis, University of London, Birkbeck, UK.

Bartiaux, F; Gram-Hanssen, K; Fonseca, P; Ozoliņa, L and Christensen, T H (2014) A practice-theory approach to homeowners' energy retrofits in four European areas. Building Research & Information, 42(4), pp. 525-538. ISSN 0961-3218

Bavi, R (2005) The development of a model design-build specification document for educational facilities construction projects. EdD thesis, Wilmington College (Delaware), USA.

Belpoliti, V; Nassif, R; Alzaabi, E and Aljneibi, A (2020) Multi-criteria assessment for the functional-energy upgrade of the UAE school sector: A bottom-up approach promoting refurbishment versus new construction. Architectural Engineering and Design Management, 16(3), pp. 167-190. ISSN 1745-2007

Berg, J B; Thuesen, C and Jensen, P A (2023) Procurement innovation as a vehicle for sustainable change: a case study of the Danish model of strategic partnerships. Construction Innovation, 23(3), pp. 665-682. ISSN 1471-4175

Bergsdal, H; Brattebø, H; Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for norway's dwelling stock. Building Research & Information, 35(5), pp. 557-570. ISSN 0961-3218

Berry, S; Sharp, A; Hamilton, J and Killip, G (2014) Inspiring low-energy retrofits: The influence of open home events. Building Research & Information, 42(4), pp. 422-433. ISSN 0961-3218

Blismas, N G; Sher, W and Thorpe, A (1998) National and global multi-site projects. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Borja, Luis Claudio Alves (2019) Development of a quantitative method for predicting environmental aspects generated by construction sites. PhD thesis, Universidade Federal da Bahia, Brazil.

Bortolini, R and Forcada, N (2020) A probabilistic performance evaluation for buildings and constructed assets. Building Research & Information, 48(8), pp. 838-855. ISSN 0961-3218

Boussaa, Y; Dodoo, A; Nguyen, T and Rupar-Gadd, K (2024) Comprehensive renovation of a multi-apartment building in Sweden: Techno-economic analysis with respect to different economic scenarios. Building Research & Information, 52(4), pp. 463-478. ISSN 0961-3218

Bradley, P (2019) The development of a conceptual framework to help achieve low carbon commercial office buildings in London by 2050. PhD thesis, Ulster University, UK.

Brahmi, B F; Sassi Boudemagh, S; Kitouni, I and Kamari, A (2022) IPD and BIM-focussed methodology in renovation of heritage buildings. Construction Management and Economics, 40(3), pp. 186-206. ISSN 01446193

Brandon, P S and Loforte Ribeiro, F (1997) The assessment of applications for the house renovation grant system (hrgs): A multistrategy knowledge-based framework. Engineering, Construction and Architectural Management, 4(1), pp. 41-57. ISSN 0969-9988

Brandon, P S and Ribeiro, F L (1998) A knowledge-based system for assessing applications for house renovation grants. Construction Management and Economics, 16(1), pp. 57-69. ISSN 01446193

Broadhurst, S J (2000) Non-man-entry sewer renovation robot characteristics. PhD thesis, Sheffield Hallam University, UK.

Bu, S; Shen, G; Anumba, C J; Wong, A K D and Liang, X (2015) Literature review of green retrofit design for commercial buildings with BIM implication. Smart and Sustainable Built Environment, 4(2), pp. 188-214. ISSN 2046-6099

Buser, M and Bosch-Sijtsema, P (2018) Attributing value to waste: The difficult road to efficient waste management for renovation projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Buser, M and Carlsson, V (2014) Is anybody home? The role of company websites for small building contractors in Sweden. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Buser, M and Carlsson, V (2015) Renewing renovation: Looking at renovation of owners occupied houses with socio-materiality lenses. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Buser, M and Carlsson, V (2017) What you see is not what you get: Single-family house renovation and energy retrofit seen through the lens of sociomateriality. Construction Management and Economics, 35(5), pp. 276-287. ISSN 01446193

Buser, M; Carlsson, V and Koch, C (2019) Interactive shaping of expertise: The play between house-owner and SME contractors negotiating renovation. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Buser, M and Koch, C (2014) Is this none of the contractor's business? Social sustainability challenges informed by literary accounts. Construction Management and Economics, 32(7-8), pp. 749-759. ISSN 01446193

Buser M, K C (2013) Swedish poverty: An oxymoron? Taking issue with social sustainability in urban renewal. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Cai, W.; Hua, D.; Li, S.; Xue, S. and Xu, Z. (2026) 3D reconstruction of building interiors based on scan-to-BIM and generative design for as-built building. Engineering, Construction and Architectural Management, 33(3), pp. 1959-1979. ISSN 0969-9988

Cao, Y.; Zhong, N.; Li, M. and Yang, A. (2026) Analysis and research of shougang park industrial heritage redevelopment space based on residents' spatial behaviour. Building Research & Information, 54(5), pp. 535-551. ISSN 0961-3218

Cao, Y and Yang, A (2025) Spatial syntax analysis on the renewal of the external space of mining heritage buildings: A case study of Zollverein Coal Mine Industrial Complex. Architectural Engineering and Design Management, 21(1), pp. 136-153. ISSN 1745-2007

Cargnelutti, Dejan (2025) 4IR technologies within germany’s construction sector to meet fire protection standards and international climate objectives: A multiple-case study. PhD thesis, European Institute of Management, Malta.

Carlsson, V (2017) SME contractors on the stage for energy renovations? A dramaturgical perspective on SME contractors’ roles and interactions with house owners. PhD thesis, Chalmers University of Technology, Sweden.

Carlsson, V and Koch, C (2014) Shall we dance? Encounters for energy renovation of single family houses. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Carroll, Steven Paige (2005) Risk-based approach to on-site wastewater treatment system siting design and management. PhD thesis, Queensland University of Technology, Australia.

Cha, H S; Kim, K H and Kim, C K (2012) Case study on selective demolition method for refurbishing deteriorated residential apartments. Journal of Construction Engineering and Management, 138(2), pp. 294-303. ISSN 0733-9364

Chan, P W; Fishman, T; Gruis, V; Hu, M; Schruijer, S; van Marrewijk, A and Vrijhoef, R (2023) Questioning collaboration in the circular built environment: Multi-cycle, multi-scalar and multi-level perspectives in the renovation sector. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Chauhan, Krishna (2024) Prefabrication in construction: A systemic approach to impact and implementation. DScTech thesis, Aalto University, Finland.

Chen, W; Yu, M; Wang, Y; Lu, X and Hou, J (2025) Evolutionary analysis of value co-destruction in urban village renovation using SEM-FCM model. Engineering, Construction and Architectural Management, 32(11), pp. 7486-7506. ISSN 0969-9988

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Chen, Y; Fang, Q and Lan, Y (2025) Development of a modular assembling, suspended, and sliding scaffold. Journal of Construction Engineering and Management, 151(9): 04025131, ISSN 0733-9364

Chouhan, S; Narang, A and Mukherjee, M (2024) Multihazard risk assessment of educational institutes of dehradun, uttarakhand. International Journal of Disaster Resilience in the Built Environment, 15(1), pp. 45-58. ISSN 1759-5916

Chro, A H R (2018) Sustainable renovation of residential buildings in subtropical climate zone. PhD thesis, University of Pécs, Hungary.

Clevenger, C M (2010) Design guidance: Assessing process challenge, strategy, and exploration. PhD thesis, Stanford University, USA.

Cochran, K M (2006) Construction and demolition debris recycling: Methods, markets, and policy. PhD thesis, University of Florida, USA.

Coffey, B; Borgeson, S; Selkowitz, S; Apte, J; Mathew, P and Haves, P (2009) Towards a very low-energy building stock: Modelling the US commercial building sector to support policy and innovation planning. Building Research & Information, 37(5-6), pp. 610-624. ISSN 0961-3218

Cole, L J R (1991) Construction scheduling: Principles, practices, and six case studies. Journal of Construction Engineering and Management, 117(4), pp. 579-588. ISSN 0733-9364

Cole, R J and Mitchell, L (1999) Customizing and using GBTool: Two case-study projects. Building Research & Information, 27(4-5), pp. 257-275. ISSN 0961-3218

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(1), pp. 97-109. ISSN 2046-6099

Correia, Marcia Castilho (2019) Assessment of the quality of architectural projects for public health research laboratories: Sustainability and biosafety. PhD thesis, Universidade Federal do Rio de Janeiro, Brazil.

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

Dandago, A A; Yamusa, M A; Lawal, H S; Abubakar, M; Abdullahi, M and Zailani, B M (2025) Impact of uncertainty factors on the performance of building renovation projects. Journal of Engineering, Design and Technology, 23(6), pp. 1875-1897. ISSN 1726-0531

Daneshfar, M (2024) Integration of geospatial and environmental data to support building renovation. PhD thesis, Technische Universitaet Berlin, Germany.

Danso, F O; Badu, E; Ahadzie, D K and Manu, P (2015) Health and safety issues and mitigation measures relating to adaptive-retrofits projects: Literature review and research implications for the Ghanaian construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Davis, M R (2018) Achieving diversity on local publicly funded construction projects in the state of California: Knowledge, motivation, and organization factors influencing prime contractor selection of minority subcontractors. EdD thesis, University of Southern California, USA.

Denny, J (2025) Organizing change: A single case study exploring the perceptions of self-determination in high school employees during a building renovation. EdD thesis, Baylor University, USA.

Di Ruocco, G; Melella, R and Marino, V (2022) An integrated assessment method for the sustainability of the opaque building envelope in residential buildings with Italian gbc-home certification. Architectural Engineering and Design Management, 18(4), pp. 545-570. ISSN 1745-2007

Disney, O; Roupé, M and Johansson, M (2023) Driving circularity with total BIM: An integrated approach to data-driven design. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Doukari, O; Kassem, M; Scoditti, E; Aguejdad, R and Greenwood, D (2024) A BIM based tool for evaluating building renovation strategies: The case of three demonstration sites in different European countries. Construction Innovation, 24(1), pp. 365-383. ISSN 1471-4175

Ebbert, T (2010) Re-face: Refurbishment strategies for the technical improvement of office façades. PhD thesis, Delft University of Technology, Netherlands.

Ebrahimigharehbaghi, S (2022) Understanding the decision-making process in homeowner energy retrofits: From behavioural and transaction cost perspectives. PhD thesis, Delft University of Technology, Netherlands.

Ebrahimigharehbaghi, S; Qian, Q K; de Vries, G and Visscher, H J (2022) Identification of the behavioural factors in the decision-making processes of the energy efficiency renovations: Dutch homeowners. Building Research & Information, 50(4), pp. 369-393. ISSN 0961-3218

Elliott, J W (2013) Development of the construction training attitudes and intentions scale. PhD thesis, Colorado State University, USA.

Escamilla, E (2011) Investigation of project management planning practices for renovation of historical buildings in urban contexts located in Texas. PhD thesis, Texas A&M University, USA.

Fahrich, R; Schumann, L; Kremser, L; Schmitt, L and Kriegel, M (2025) Building energy efficiency assessment considering IEQ and sustainability certification data for German office buildings. Building Research & Information, 53(7), pp. 912-928. ISSN 0961-3218

Farahani, A (2019) A systematic approach to strategic maintenance and renovation planning in multifamily buildings. PhD thesis, Chalmers University of Technology, Sweden.

Farahani, A; Wallbaum, H and Dalenbäck, J O (2019) Optimized maintenance and renovation scheduling in multifamily buildings: a systematic approach based on condition state and life cycle cost of building components. Construction Management and Economics, 37(3), pp. 139-155. ISSN 01446193

Farahani, A; Wallbaum, H and Dalenbäck, J O (2020) Cost-optimal maintenance and renovation planning in multifamily buildings with annual budget constraints. Journal of Construction Engineering and Management, 146(3): 04020009, ISSN 0733-9364

Fawcett, T (2014) Exploring the time dimension of low carbon retrofit: Owner-occupied housing. Building Research & Information, 42(4), pp. 477-488. ISSN 0961-3218

Fazlipour, M and Samadzad, M (2026) Engineering and economic feasibility of a new prefabrication ecosystem for steel construction in diverse low-rise residential buildings. Journal of Construction Engineering and Management, 152(2): 04025238, ISSN 0733-9364

Fernandes, D A; Costa, A A and Lahdenperä, P (2018) Key features of a project alliance and their impact on the success of an apartment renovation: A case study. International Journal of Construction Management, 18(6), pp. 482-496. ISSN 1562-3599

Ferraro, R M (2009) Materials for sustainable constructions. PhD thesis, University of Miami, USA.

Ferreira, M; Almeida, M; Rodrigues, A and Silva, S M (2016) Comparing cost-optimal and net-zero energy targets in building retrofit. Building Research & Information, 44(2), pp. 188-201. ISSN 0961-3218

Forbes, Lincoln Harding (1999) An engineering management-based investigation of owner satisfaction, quality and performance variables in health care facilities construction. PhD thesis, University of Miami, USA.

Foulds, C; Royston, S; Aggeli, A; Crowther, A and Robison, R (2026) Sharing energy renovations know-how through citizen–professional knowledge networks. Buildings & Cities, 7(1), pp. 341-359. ISSN 2632-6655

Friedman, A and Cammalleri, V (1997) Selection criteria for energy-efficient windows. Building Research & Information, 25(4), pp. 234-238. ISSN 0961-3218

Gade, A N; Jensen, R L; Larsen, T S; Nissen, S B and Andresen, I (2021) Value-based decision making in the pre-design stage of sustainable building renovation projects–exploring two methods for weighting criteria. International Journal of Construction Management, 21(6), pp. 648-663. ISSN 1562-3599

Gallardo, C; Sandberg, N H and Brattebø, H (2014) Dynamic-MFA examination of Chilean housing stock: Long-term changes and earthquake damage. Building Research & Information, 42(3), pp. 343-358. ISSN 0961-3218

Galvin, R (2023) How prebound effects compromise the market premium for energy efficiency in German house sales. Building Research & Information, 51(5), pp. 501-517. ISSN 0961-3218

Gambatese, J A (2003) Controlled concrete demolition using expansive cracking agents. Journal of Construction Engineering and Management, 129(1), pp. 98-104. ISSN 0733-9364

Gao, H; Zhang, L and Gu, S (2026) Carbon emission efficiency measurement of construction enterprises based on the three-stage DEA-sbm model. Journal of Construction Engineering and Management, 152(4): 04026028, ISSN 0733-9364

Gao, T; Ergan, S; Akinci, B and Garrett, J H (2014) Proactive productivity management at job sites: Understanding characteristics of assumptions made for construction processes during planning based on case studies and interviews. Journal of Construction Engineering and Management, 140(3): 4013054, ISSN 0733-9364

Garrido Martins, C (2019) Assessment of project risks in fast-track construction projects. PhD thesis, University of New Mexico, USA.

Ghanbari, M; Rusch, R and Skitmore, M (2024) BIM-based environmental assessment of residential renovation projects during the operational phase. Architectural Engineering and Design Management, 20(3), pp. 624-635. ISSN 1745-2007

Glad, W (2012) Housing renovation and energy systems: The need for social learning. Building Research & Information, 40(3), pp. 274-289. ISSN 0961-3218

Gluch, P and Svensson, I (2016) The organizational nexus of changing management practices for sustainable renovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Gluch, P and Svensson, I (2018) On the nexus of changing public facilities management practices: Purposive and co-creative actions across multiple levels. Construction Management and Economics, 36(5), pp. 259-275. ISSN 01446193

Godbolt, Å L; Flyen, C; Hauge, Å L; Flyen, A C and Moen, L L (2018) Future resilience of cultural heritage buildings: how do residents make sense of public authorities' sustainability measures? International Journal of Disaster Resilience in the Built Environment, 9(1), pp. 18-30. ISSN 1759-5916

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Goodarzi, F; Palaniappan, K; Pillay, M and Ershadi, M (2025) A scoping review of indoor air quality assessment in refurbished buildings. Smart and Sustainable Built Environment, 14(1), pp. 93-118. ISSN 2046-6099

Gowri, K and Depanni, S (1998) The health and safety expert system (HASES): An expert system framework for building inspections. Engineering, Construction and Architectural Management, 5(1), pp. 92-101. ISSN 0969-9988

Grant, E J (2020) Mainstreaming environmental education for architects: The need for basic literacies. Buildings & Cities, 1(1), pp. 538-549. ISSN 2632-6655

Guanyu, W; Xiaoxia, L and Gab-Soo, H (2025) Research on the protection of and renewal strategies for historic buildings in the ancient city of liaocheng based on multisource data. Architectural Engineering and Design Management, 21(1), pp. 120-135. ISSN 1745-2007

Haines, V and Mitchell, V (2014) A persona-based approach to domestic energy retrofit. Building Research & Information, 42(4), pp. 462-476. ISSN 0961-3218

Hanna Jr., H M (1988) The use of construction management in school building construction. EdD thesis, University of Missouri - Columbia, USA.

Harbin, K B (2020) A decision analysis tool for building renovations regarding adaptive reuse. PhD thesis, University of Alabama, USA.

Hardie, M; Khan, S; O'Donnell, A and Miller, G (2007) The efficacy of waste management plans in Australian commercial construction refurbishment projects. Construction Economics and Building, 7(2), pp. 26-36. ISSN 2204-9029

Hassan, A; El-Rayes, K and Attalla, M (2021) Optimizing the scheduling of crew deployments in repetitive construction projects under uncertainty. Engineering, Construction and Architectural Management, 28(6), pp. 1615-1634. ISSN 0969-9988

Hassanien, A (2003) Analysing hotel repositioning through property renovation in the hospitality industry. PhD thesis, University of Strathclyde, UK.

Heesom, D; Boden, P; Hatfield, A; Rooble, S; Andrews, K and Berwari, H (2021) Developing a collaborative HBIM to integrate tangible and intangible cultural heritage. International Journal of Building Pathology and Adaptation, 39(1), pp. 72-95. ISSN 23984708

Henry, E and Brothers, H S (2001) Cost analysis between SABER and design bid build contracting methods. Journal of Construction Engineering and Management, 127(5), pp. 359-366. ISSN 0733-9364

Heravi, G and Mohammadian, M (2021) Investigating cost overruns and delay in urban construction projects in Iran. International Journal of Construction Management, 21(9), pp. 958-968. ISSN 1562-3599

Herrera-Avellanosa, D; Haas, F; Leijonhufvud, G; Brostrom, T; Buda, A; Pracchi, V; Webb, A L; Hüttler, W and Troi, A (2020) Deep renovation of historic buildings: The iea-shc task 59 path towards the lowest possible energy demand and CO2 emissions. International Journal of Building Pathology and Adaptation, 38(4), pp. 539-553. ISSN 23984708

Hong, J (2006) A study on analytic approaches to intelligent buildings assessment. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Horne, R; Maller, C and Dalton, T (2014) Low carbon, water-efficient house retrofits: An emergent niche? Building Research & Information, 42(4), pp. 539-548. ISSN 0961-3218

Hu, M; Nippala, E; Kallioharju, K and Pelsmakers, S (2022) Monte Carlo simulation approach to understand the cost variance for energy retrofit projects: Comparative study of Finland and the United States. Construction Management and Economics, 40(3), pp. 207-222. ISSN 01446193

Huuhka, S (2023) Understanding demolition. Buildings & Cities, 4(1), pp. 927-937. ISSN 2632-6655

Huuhka, S; Moisio, M; Salmio, E; Köliö, A and Lahdensivu, J (2023) Renovate or replace? Consequential replacement LCA framework for buildings. Buildings & Cities, 4(1), pp. 212-228. ISSN 2632-6655

Högberg, L (2014) Building sustainability: Studies on incentives in construction and management of real estate. PhD thesis, KTH Royal Institute of Technology, Sweden.

Ibrahim Khil, Mohammad Hashim (2025) Automated construction progress monitoring of buildings through mobile mapping and as-built modeling. PhD thesis, University of New South Wales, Australia.

Ikerd II, W F (2021) Level of acceptance (LOA) for scan-to-BIM creation. PhD thesis, University of Denver, USA.

Inançoğlu, S and Uzunoglu, S S (2022) Transformation of social housing kitchens over time: Nicosia göçmenköy social houses as a case study. International Journal of Building Pathology and Adaptation, 40(1), pp. 40-59. ISSN 23984708

Ingle, A; Moezzi, M; Lutzenhiser, L and Diamond, R (2014) Better home energy audit modelling: Incorporating inhabitant behaviours. Building Research & Information, 42(4), pp. 409-421. ISSN 0961-3218

Ismaeel, W S E; Alamoudy, F O and Sameh, R (2023) How renovation activities may jeopardise indoor air quality: Accounting for short and long-term symptoms of sick building syndrome in educational buildings. Architectural Engineering and Design Management, 19(4), pp. 360-377. ISSN 1745-2007

Itard, L and Klunder, G (2007) Comparing environmental impacts of renovated housing stock with new construction. Building Research & Information, 35(3), pp. 252-267. ISSN 0961-3218

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jalilzadehazhari, E; Johansson, P; Johansson, J and Mahapatra, K (2019) Developing a decision-making framework for resolving conflicts when selecting windows and blinds. Architectural Engineering and Design Management, 15(5), pp. 357-381. ISSN 1745-2007

James, P D (2012) The specification of construction strategies for low and zero carbon homes: decision-making tools and the evaluation of whole life energy, carbon, cost and performance. PhD thesis, University of Manchester, UK.

Johansen, J B; Jensen, P A and Thuesen, C (2017) Maturity model for strategic collaboration in sustainable building renovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Jowkar, M; Temeljotov-Salaj, A; Lindkvist, C M and Støre-Valen, M (2022) Sustainable building renovation in residential buildings: Barriers and potential motivations in Norwegian culture. Construction Management and Economics, 40(3), pp. 161-172. ISSN 01446193

Judson, E P and Maller, C (2014) Housing renovations and energy efficiency: Insights from homeowners practices. Building Research & Information, 42(4), pp. 501-511. ISSN 0961-3218

Kaasalainen, T and Huuhka, S (2016) Homogenous homes of Finland: 'Standard' flats in non-standardized blocks. Building Research & Information, 44(3), pp. 229-247. ISSN 0961-3218

Kakitahi, J M (2014) Causality, magnitude and impact mitigation of rework in Uganda. PhD thesis, Lund University, Sweden.

Kandil, A A (2005) Multi-objective optimization for large-scale highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Keller, E C (1999) Prevailing wage rates: The effects on school construction, levels of taxation, and state reimbursements. DEd thesis, Pennsylvania State University, USA.

Kelly, D and Koo, H J (2024) Challenges managing large historic building renovations: Lessons learned from detroit, Michigan. Journal of Construction Engineering and Management, 150(2): 05023015, ISSN 0733-9364

Kerr, N J (2018) The rationale for retrofit: A multi-level, interdisciplinary perspective on the energy efficient retrofit of existing residential buildings. PhD thesis, University of Leeds, UK.

Kerr, W C; Tamaro, G J and Hahn, D M (1992) Exchange place station subsurface reconstruction and improvements. Journal of Construction Engineering and Management, 118(1), pp. 166-178. ISSN 0733-9364

Kim, J J; Miller, J A and Kim, S (2020) Cost impacts of change orders due to unforeseen existing conditions in building renovation projects. Journal of Construction Engineering and Management, 146(8): 04020094, ISSN 0733-9364

Koch, C (2013) From crew to country? Local and national construction safety cultures in Denmark. Construction Management and Economics, 31(6), pp. 691-703. ISSN 1466433X

Koch, C and Bertelsen, N H (2014) Changing institutions of knowing: Climate mitigation, craft competences and vocational training in Denmark. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Koch, C and Buser, M (2015) Sitting between two chairs: Introducing social sustainability in three large Swedish contractor companies. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Kohler, N and Yang, W (2007) Long-term management of building stocks. Building Research & Information, 35(4), pp. 351-362. ISSN 0961-3218

Konstantinou, T; de Jonge, T; Oorschot, L; El Messlaki, S; van Oel, C and Asselbergs, T (2020) The relation of energy efficiency upgrades and cost of living, investigated in two cases of multi-residential buildings in the Netherlands. Smart and Sustainable Built Environment, 9(4), pp. 615-633. ISSN 2046-6099

Koo, H J; Kelly, D and Deman, D (2024) Risk assessment of the challenges in the adaptive reuse of historic buildings. Journal of Construction Engineering and Management, 150(9): 04024119, ISSN 0733-9364

Kumar Dhar, T; Sk. Maruf Hossain, M and Rubayet Rahaman, K (2013) How does flexible design promote resource efficiency for housing? A study of Khulna, Bangladesh. Smart and Sustainable Built Environment, 2(2), pp. 140-157. ISSN 2046-6099

Kuo, Vincent (2019) Latent semantic analysis for knowledge management in construction. DSc(Tech) thesis, Aalto University, Finland.

Kurvinen, A; Huovari, J; Lahtinen, M; Sen, T and Saari, A (2024) A dynamic model for estimating the long-term need for repairs and renovations in residential buildings. Building Research & Information, 52(5), pp. 533-550. ISSN 0961-3218

Kuusk, K and Kalamees, T (2016) Retrofit cost-effectiveness: Estonian apartment buildings. Building Research & Information, 44(8), pp. 920-934. ISSN 0961-3218

Kähkönen, K and Rannisto, J (2015) Understanding fundamental and practical ingredients of construction project data management. Construction Innovation, 15(1), pp. 7-23. ISSN 1471-4175

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Laefer, D F and Manke, J P (2008) Building reuse assessment for sustainable urban reconstruction. Journal of Construction Engineering and Management, 134(3), pp. 217-227. ISSN 0733-9364

Lam, E W M; Chan, A P C; Olawumi, T O; Wong, I and Kazeem, K O (2024) Critical factors that influence lean premise design implementation: A case of Hong Kong high-rise buildings. Architectural Engineering and Design Management, 20(6), pp. 1612-1628. ISSN 1745-2007

Languell, J L (2001) Development of a prototype assessment tool to evaluate the potential to successfully implement deconstruction as a regional waste reduction strategy. PhD thesis, University of Florida, USA.

Lawal, H S; Ahmadu, H A; Abdullahi, M; Yamusa, M A and Abdulrazaq, M (2023) Modeling duration of building renovation projects. Journal of Financial Management of Property and Construction, 28(3), pp. 423-438. ISSN 1366-4387

Lin, S C (2015) An analysis for construction engineering networks. Journal of Construction Engineering and Management, 141(5): 04014096, ISSN 0733-9364

Liu, J and Li, G (2021) Comprehensive benefit evaluation on urban village micro-transformation based on extension matter-element model. International Journal of Construction Management, 21(5), pp. 524-537. ISSN 1562-3599

Liu, L (2017) A systematic approach for major renovation of residential buildings. PhD thesis, Linköping University, Sweden.

Liu, R (2021) Impact of enhanced context-awareness for construction field crews on task cycle time. PhD thesis, Stanford University, USA.

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

Lucas, A N and Löschke, S K (2025) Towards circular renovation: A comparative review of circular economy integration in sustainable building rating systems. Building Research & Information, 53(3), pp. 375-396. ISSN 0961-3218

Machline, E; Pearlmutter, D and Schwartz, M (2018) Parisian eco-districts: Low energy and affordable housing? Building Research & Information, 46(6), pp. 636-652. ISSN 0961-3218

Malmberg, F (2007) Introduction of a new form of quote evaluation: A case study in southern Sweden. Construction Management and Economics, 25(6), pp. 661-669. ISSN 1466433X

Mannarino, J A (2001) Evaluation of the construction management delivery system and establishing a model for selection: A qualitative approach. PhD thesis, State University of New York at Buffalo, USA.

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Meijer, F; Itard, L and Sunikka-Blank, M (2009) Comparing European residential building stocks: Performance, renovation and policy opportunities. Building Research & Information, 37(5-6), pp. 533-551. ISSN 0961-3218

Mikhailova, A (2017) Spatial evolution of a museum building: a case of the State Historical Museum in Moscow. PhD thesis, University of Leicester, UK.

Mikulić, D; Lovrinčević, Ž and Keček, D (2021) Valorization of economic effects from the programme of energy renovation of public buildings in Croatia. Building Research & Information, 49(5), pp. 561-573. ISSN 0961-3218

Misztal, G (2004) Refurbishment urgency indicators of residential buildings. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Mmereki, D and Brouwer, D (2022) Application of innovative materials and methods in green buildings and associated occupational exposure and health of construction workers: A systematic literature review. Journal of Construction Engineering and Management, 148(8): 04022068, ISSN 0733-9364

Moisio, M; Salmio, E; Kaasalainen, T; Huuhka, S; Räsänen, A; Lahdensivu, J; Leppänen, M and Kuula, P (2024) Towards urban LCA: examining densification alternatives for a residential neighbourhood. Buildings & Cities, 5(1), pp. 581-600. ISSN 2632-6655

Mäki T, K H (2013) Site managers' uses of building information modeling on construction sites. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Naanaa, H.; Bril El Haouzi, H.; Derigent, W. and Lezoche, M. (2026) A semantic search system for efficient information retrieval in the construction domain. Smart and Sustainable Built Environment, 15(5), pp. 1781-1807. ISSN 2046-6099

Nguyen, P A; Bokel, R and Dobbelsteen, A (2019) Improving energy efficiency in Vietnamese tube houses: A survey of sustainable challenges and potentials. Smart and Sustainable Built Environment, 8(5), pp. 366-390. ISSN 2046-6099

Nguyen, T P and Chileshe, N (2015) Revisiting the construction project failure factors in Vietnam. Built Environment Project and Asset Management, 5(4), pp. 398-416. ISSN 2044-124X

Nguyen T P, C N (2013) Revisiting the critical factors causing failure of construction projects in Vietnam. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Nibbelink, J-G; Sutrisna, M and Zaman, A U (2017) Unlocking the potential of early contractor involvement in reducing design risks in commercial building refurbishment projects: a Western Australian perspective. Architectural Engineering and Design Management, 13(6), pp. 439-456. ISSN 1745-2007

Nichols, S (2021) Opération béton: Constructing concrete in Switzerland. DSc thesis, ETH Zürich, Switzerland.

Niskanen, T and Lauttalammi, J (1989) Accident risks during handling of materials at building construction sites. Construction Management and Economics, 7(4), pp. 283-301. ISSN 01446193

O'Connor, J T and Yang, L R (2004) Project performance versus use of technologies at project and phase levels. Journal of Construction Engineering and Management, 130(3), pp. 322-329. ISSN 0733-9364

Ogbeifun, E; Mbohwa, C and Pretorius, J H C (2018) Developing an effective renovation plan: The influence of data collection tools. International Journal of Building Pathology and Adaptation, 36(1), pp. 63-76. ISSN 23984708

Ogunmakinde, O E; Egbelakin, T and Henderson, R (2023) Evaluation of animal safe places for emergency evacuation in the hunter region of New South Wales, Australia. International Journal of Disaster Resilience in the Built Environment, 14(4), pp. 553-576. ISSN 1759-5916

Oladapo, O and Liyanage, C L (2010) Control of healthcare associated infections: A concerted effort. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Oliveira, L A and Melhado, S B (2011) Conceptual model for the integrated design of building façades. Architectural Engineering and Design Management, 7(3), pp. 190-204. ISSN 1745-2007

Pardalis, G. and Sula, M. (2026) One-stop shops as leverage points for renovation sufficiency. Buildings & Cities, 7(1), pp. 614-632. ISSN 2632-6655

Pardalis, G; Mahapatra, K and Mainali, B (2020) Swedish construction MSEs: Simply renovators or renovation service innovators? Building Research & Information, 48(1), pp. 67-83. ISSN 0961-3218

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Pavlovas, V (2006) Energy savings in existing Swedish apartment buildings: Some aspects on demand controlled ventilation and individual metering. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Peng, Z; Sun, Q; Li, P; Sun, F; Ren, S and Guan, R (2026) The environmental impact of the entire renovation process of urban aged residential buildings in China. International Journal of Building Pathology and Adaptation, 44(1), pp. 185-207. ISSN 2398-4708

Petersen, S H (2024) What happens when we see collaboration from different perspectives? A multi-perspective on micro-processes in large construction project organisations. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Pin, T H and Scott, W F (1994) Bidding model for refurbishment work. Journal of Construction Engineering and Management, 120(2), pp. 257-273. ISSN 0733-9364

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities. Unpublished PhD thesis, Universidade Estadual de Campinas, Brazil.

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities: Focus on the city of Campinas – SP. PhD thesis, Universidade Estadual de Campinas, Brazil.

Pittri, H; Agyekum, K; Ayebeng Botchway, E; Opoku, A and Bimpli, I (2024) Design for deconstruction (dfd) implementation among design professionals: Empirical evidence from Ghana. International Journal of Construction Management, 24(13), pp. 1387-1397. ISSN 1562-3599

Primdahl, M B; Forman, M; Frandsen, A F; Pihl, D and Nielsen, A K B (2022) Does the enactment of information and communications technology agreements in a digital construction organisation impact the mental work environment? In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Pulaski, M H (2005) The alignment of sustainability and constructability: A continuous value enhancement process. PhD thesis, Pennsylvania State University, USA.

Pulaski, M H and Horman, M J (2005) Continuous value enhancement process. Journal of Construction Engineering and Management, 131(12), pp. 1274-1282. ISSN 0733-9364

Pulaski, M H and Horman, M J (2005) Organizing constructability knowledge for design. Journal of Construction Engineering and Management, 131(8), pp. 911-919. ISSN 0733-9364

Rajala, P; Ylä-Kujala, A; Sinkkonen, T and Kärri, T (2022) Profitability in construction: How does building renovation business fare compared to new building business. Construction Management and Economics, 40(3), pp. 223-237. ISSN 01446193

Rajala, P; Ylä-Kujala, A; Sinkkonen, T and Kärri, T (2023) Building renovation business: The effects of specialization on profitability. Construction Management and Economics, 41(8), pp. 687-702. ISSN 01446193

Rajala, P; Ylä-Kujala, A; Sinkkonen, T and Kärri, T (2025) Operational effectiveness in building renovation business: Best practices for profitable execution. Construction Economics and Building, 25(1), pp. 97-121. ISSN 2204-9029

Rajan, T; Siddharth, R and Mukund, S P (2010) PPPs in road renovation and maintenance: A case study of the East Coast Road project. Journal of Financial Management of Property and Construction, 15(1), pp. 21-40. ISSN 1366-4387

Reinoso, E; Jaimes, M A and Torres, M A (2016) Evaluation of building code compliance in Mexico city: Mid-rise dwellings. Building Research & Information, 44(2), pp. 202-213. ISSN 0961-3218

Remøy, H and Van Der Voordt, T (2014) Adaptive reuse of office buildings into housing: Opportunities and risks. Building Research & Information, 42(3), pp. 381-390. ISSN 0961-3218

Ribeiro, F J L T (1995) Assessment of applications for the house renovations grants system: An IT support framework. PhD thesis, University of Salford, UK.

Ricci, D; Leiwakabessy, C; van Wieringen, S; de Koning, P and Konstantinou, T (2025) Co-creating justice in housing energy transitions through energy living labs. Buildings & Cities, 6(1), pp. 747-766. ISSN 2632-6655

Roca-Puigròs, M; Billy, R G; Gerber, A; Wäger, P and Müller, D B (2020) Pathways toward a carbon-neutral Swiss residential building stock. Buildings & Cities, 1(1), pp. 579-593. ISSN 2632-6655

Rodionova, A (2022) Robust and reliable building renovation strategies for environmental and economic performance. DSc thesis, ETH Zürich, Switzerland.

Rovers, R (2014) New energy retrofit concept: 'Renovation trains' for mass housing. Building Research & Information, 42(6), pp. 757-767. ISSN 0961-3218

Ruokamo, E; Franzini, F; Lähtinen, K and Toppinen, A (2024) To renovate or build with wood? Results from Finnish citizen survey data. Construction Management and Economics, 42(10), pp. 886-901. ISSN 01446193

Sabri, B K M; Ujang, N; Arif, A M M and Aripin, S (2017) Measures in curbing poor compliance to building control regulation among renovated terrace houses. International Journal of Law in the Built Environment, 9(3), pp. 256-271. ISSN 1756-1450

Saeed, F; Mostafa, K; Rauch, C and Hegazy, T (2023) Environmental impact and cost assessment for reusing waste during end-of-life activities on building projects. Journal of Construction Engineering and Management, 149(10): 04023099, ISSN 0733-9364

Sajjad, M; Jayasinghe, C and Perera, P (2024) Damage assessment automation for single storey detached masonry houses: a probabilistic approach. Building Research & Information, 52(5), pp. 551-563. ISSN 0961-3218

Salah Eldeen Ismaeel Elsayed Ahmed, Walaa (2014) Developing a systemic framework for applying LEED system: Managing energy and materials credits. PhD thesis, Politecnico di Milano, Italy.

Salcedo, R T B and Straub, A (2016) The role of the architect using integrated contracts for social housing renovation projects. Journal of Engineering, Design and Technology, 14(4), pp. 802-817.

Salcedo Rahola, T B (2015) Integrated project delivery methods for energy renovation of social housing. PhD thesis, Delft University of Technology, Netherlands.

Sameh, R; Ismaeel, W S E and Othman, F (2021) Sustainable building renovation and indoor environmental quality. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Sandy, G C (1981) An evaluative comparison of the satisfaction with the utility of new buildings versus library additions and addition/renovations. PhD thesis, Florida State University, USA.

Sartori, I; Bergsdal, H; Muller, D B and Brattebø, H (2008) Towards modelling of construction, renovation and demolition activities: Norway's dwelling stock, 1900-2100. Building Research & Information, 36(5), pp. 412-425. ISSN 0961-3218

Schade, J (2013) A design process perspective on the energy performance of buildings. PhD thesis, Luleå University of Technology, Sweden.

Schied Jr., E P (2012) Geometric information scheduling to identify and resolve spatial conflicts and increase efficiency of space use on construction projects. PhD thesis, Catholic University of America, USA.

Sezer, A (2012) Environmental assessment tools and efficiency in housing and office refurbishment. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Shafique, F (2020) Transformational leadership for sustainability in architecture engineering and construction project teams. PhD thesis, Michigan State University, USA.

Shohet, I M and Perelstein, E (2004) Decision support model for the allocation of resources in rehabilitation projects. Journal of Construction Engineering and Management, 130(2), pp. 249-257. ISSN 0733-9364

Shooshtarian, S; Lingard, H and Wong, P S P (2020) Using the cost of construction work to trigger legislative duties for WHS: The Australian experience. Built Environment Project and Asset Management, 10(3), pp. 369-387. ISSN 2044-124X

Slaughter, E S (2001) Design strategies to increase building flexibility. Building Research & Information, 29(3), pp. 208-217. ISSN 0961-3218

Soares, Bruno Cesarino (2021) Use of building information modeling to support built environment management. PhD thesis, Universidade Federal de Minas Gerais, Brazil.

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Spennemann, D H R (2025) Removal or preservation in place? A review of the conservation management options for asbestos cement sheeting in heritage properties. International Journal of Building Pathology and Adaptation, 43(6), pp. 1406-1422. ISSN 2398-4708

Strengers, Y; Dahlgren, K and Nicholls, L (2022) Emerging technologies' impacts on 'man caves' and their energy demand. Buildings & Cities, 3(1), pp. 503-517. ISSN 2632-6655

Sundling, R (2019) Factors influencing the outcome of renovation projects. PhD thesis, Lund University, Sweden.

Sundling, R; Blomsterberg, Å and Landin, A (2019) Enabling energy-efficient renovation: the case of vertical extension to buildings. Construction Innovation, 19(1), pp. 2-14. ISSN 1471-4175

Sundling, R; Olander, S; Wallentén, P; Burke, S; Bernardo, R and Blomsterberg, Å (2019) Lifecycle profit analysis of prefabricated multi-active façades. International Journal of Building Pathology and Adaptation, 37(5), pp. 565-578. ISSN 23984708

Sunikka, M (2006) Energy efficiency and low-carbon technologies in urban renewal. Building Research & Information, 34(6), pp. 521-533. ISSN 0961-3218

Sunikka-Blank, M and Galvin, R (2012) Introducing the prebound effect: The gap between performance and actual energy consumption. Building Research & Information, 40(3), pp. 260-273. ISSN 0961-3218

Svensson, I and Gluch, P (2017) The role of objects for institutional work in energy efficient renovation. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Svensson, I and Gluch, P (2022) Materiality in action: The role of objects in institutional work. Construction Management and Economics, 40(1), pp. 41-55. ISSN 01446193

Svensson, I and Loöwstedt, M (2019) Navigating the logics of changing public facilities management. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Sällström Eriksson, L and Lidelöw, S (2025) Maintaining or replacing a building's windows: A comparative life cycle study. International Journal of Building Pathology and Adaptation, 43(4), pp. 766-786. ISSN 2398-4708

Tambwe, O.; Aigbavboa, C. and Akinradewo, O. (2026) Influence of data longevity on data management in the South African construction industry. Construction Economics and Building, 26(2), ISSN 2204-9029

Tangtinthai, N (2016) Extraction, use and disposal of construction materials in Great Britain and Thailand. PhD thesis, University of Newcastle upon Tyne, UK.

Tarpio, J and Lehtovuori, P (2026) Horizontal building extensions: Potential in Finnish blocks of flats. Buildings & Cities, 7(1), pp. 445-466. ISSN 2632-6655

Teng, Y; Li, Z; Cai, J and Ju, M (2023) Sustainability evaluation of the prefabricated medical emergency buildings' renovation scheme after the COVID-19. Engineering, Construction and Architectural Management, 30(8), pp. 3390-3415. ISSN 0969-9988

Tetik, M; Peltokorpi, A; Seppänen, O; Leväniemi, M and Holmström, J (2021) Kitting logistics solution for improving on-site work performance in construction projects. Journal of Construction Engineering and Management, 147(1): 05020020, ISSN 0733-9364

Thomsen, A and Van Der Flier, K (2009) Replacement or renovation of dwellings: The relevance of a more sustainable approach. Building Research & Information, 37(5-6), pp. 649-659. ISSN 0961-3218

Tipple, C (1993) An analysis of the development of the construction industry since the 18th century. PhD thesis, University of Manchester, UK.

Tjørring, L and Gausset, Q (2019) Drivers for retrofit: A sociocultural approach to houses and inhabitants. Building Research & Information, 47(4), pp. 394-403. ISSN 0961-3218

Traska, G (2007) Designing renovation: The building as planning material. Building Research & Information, 35(1), pp. 54-69. ISSN 0961-3218

Tsai, Y (2009) Understanding aesthetic appreciation as an aid to the development of sustainable urban environment. PhD thesis, Cranfield University, UK.

Victar, H C and Waidyasekara, A S (2025) Optimising construction waste management in Sri Lanka through Circular economy strategies: A focus on construction and renovation and use and operate stages. Engineering, Construction and Architectural Management, 32(7), pp. 4275-4309. ISSN 0969-9988

Villa, S B; Vasconcellos, P B; De Bortoli, K C R and De Araujo, L B (2022) Lack of adaptability in Brazilian social housing: Impacts on residents. Buildings & Cities, 3(1), pp. 376-397. ISSN 2632-6655

Visscher, H; Meijer, F; Majcen, D and Itard, L (2016) Improved governance for energy efficiency in housing. Building Research & Information, 44(5-6), pp. 552-561. ISSN 0961-3218

Vitiello, Umberto (2017) A sustainable framework for the optimization of retrofit strategies of existing buildings. PhD thesis, Università degli Studi di Napoli Federico II, Italy.

Wade, F and Visscher, H (2021) Retrofit at scale: Accelerating capabilities for domestic building stocks. Buildings & Cities, 2(1), pp. 800-811. ISSN 2632-6655

Wandahl, S; Pérez, C T; Salling, S; Neve, H H; Lerche, J and Petersen, S (2021) The impact of construction labour productivity on the renovation wave. Construction Economics and Building, 21(3), pp. 11-32. ISSN 2204-9029

Watchman, M; Demers, C M H and Potvin, A (2022) Biophilia in school buildings: Towards a simplified assessment method based on spatial geometry. Architectural Engineering and Design Management, 18(4), pp. 434-452. ISSN 1745-2007

Weinsziehr, T; Grossmann, K; Gröger, M and Bruckner, T (2017) Building retrofit in shrinking and ageing cities: A case-based investigation. Building Research & Information, 45(3), pp. 278-292. ISSN 0961-3218

Welch, J A (2024) Ancient Maya labor relations: Constructing a palace at Ucanha, Yucatán, Mexico. PhD thesis, Yale University, USA.

Westling, H (1991) Technology procurement for innovation in Swedish construction. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Whelton, M G and Keane, M M (1998) The systematic development of a software environment for building appraisal in the building renovation industry. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Whiteman, W E and Irwig, H G (1988) Disturbance scheduling technique for managing renovation work. Journal of Construction Engineering and Management, 114(2), pp. 191-213. ISSN 0733-9364

Williams, C and Kosta, B (2020) Explaining the cash-in-hand consumer culture in the European home repairs and renovations sector. Journal of Financial Management of Property and Construction, 25(3), pp. 387-405. ISSN 1366-4387

Williams, C C and Kayaoglu, A (2021) Explaining the supply of home repair and renovation services in the undeclared economy: Lessons from Europe. Construction Management and Economics, 39(4), pp. 356-368. ISSN 01446193

Wilson, O D and Sharpe, K (1988) Tenders and estimates: A probabilistic model. Construction Management and Economics, 6(3), pp. 225-245. ISSN 01446193

Windapo, A; Moghayedi, A; Oliphant, D and Adediran, A (2018) Exploring the components of cost on construction projects. Journal of Construction Business and Management, 2(2), pp. 42-50. ISSN 2521-0165

Wong, K C; So, A T P and Yu, N H W (2001) The financial viablity of intelligent buildings: A Faustmann approach of assessment. Journal of Financial Management of Property and Construction, 6(1), pp. 41-50. ISSN 1366-4387

Woodward, A and Heesom, D (2021) Implementing HBIM on conservation heritage projects: Lessons from renovation case studies. International Journal of Building Pathology and Adaptation, 39(1), pp. 96-114. ISSN 23984708

Wu, Z.; Park, A.; Awada, M. and Assaad, R. H. (2026) School building conditions and chronic absenteeism within socioeconomic contexts: A component-level statistical analysis in New York state. Engineering, Construction and Architectural Management, 33(15), pp. 432-457. ISSN 0969-9988

Xu, Y and Juan, Y K (2022) Optimal decision-making model for outdoor environment renovation of old residential communities based on well community standards in China. Architectural Engineering and Design Management, 18(5), pp. 571-592. ISSN 1745-2007

Yamusa, M. A.; Dandago, A. A.; Lawal, H. S.; Saka, A. B.; Abubakar, M. and Abdullahi, M. (2025) Quantitative evaluation and modelling of uncertainty factors impacting duration of building renovation projects. Engineering, Construction and Architectural Management, 33(5), pp. 4181-4210. ISSN 0969-9988

Yamusa, M. A.; Lawal, H. S.; Abdulrahman, R. S.; Salisu, A. S.; Saka, A.; Abubakar, M. and Abdullahi, M. (2026) A machine-learning model for estimating construction renovation costs. International Journal of Building Pathology and Adaptation, 44(3), pp. 757-772. ISSN 2398-4708

Yoon, J; Yu, I and Jung, D (2018) Factors needed for the development of a constructability assessment model for building renovation and extension in Korea. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Yu, A T W; Mok, K S H and Wong, I (2023) Minimisation and management strategies for refurbishment and renovation waste in Hong Kong. Engineering, Construction and Architectural Management, 30(2), pp. 869-888. ISSN 0969-9988

Yu, J; Ma, G and Cai, S (2019) Disparities in the provision of aging-friendly communities in old and new urban neighborhoods in China. Engineering, Construction and Architectural Management, 26(7), pp. 1277-1293. ISSN 0969-9988

Yung, P and Agyekum-Mensah, G (2012) Productivity losses in smoking breaks on construction sites: A case study. Engineering, Construction and Architectural Management, 19(6), pp. 636-646. ISSN 0969-9988

Zemke, D M V and Pullman, M (2008) Assessing the value of good design in hotels. Building Research & Information, 36(6), pp. 543-556. ISSN 0961-3218

Zhang, M. and Liu, L. (2026) Incorporating safety signs in risk evaluation for tourist-construction interactions in a scenic area renovation project. Engineering, Construction and Architectural Management, 33(4), pp. 2968-2994. ISSN 0969-9988

Zimmermann, R K; Barjot, Z; Rasmussen, F N; Malmqvist, T; Kuittinen, M and Birgisdottir, H (2023) GHG emissions from building renovation versus new-build: Incentives from assessment methods. Buildings & Cities, 4(1), pp. 274-291. ISSN 2632-6655

Zou, X and Rong, Z (2025) Resource-constrained repetitive project scheduling with soft logic. Engineering, Construction and Architectural Management, 32(4), pp. 2397-2429. ISSN 0969-9988

van Stijn, A (2023) Developing circular building components: Between ideal and feasible. PhD thesis, Delft University of Technology, Netherlands.

van der Bent, H S (2022) Towards a future sustainable housing stock: Assessment of the energy performance of dwellings of non-profit housing associations. PhD thesis, Delft University of Technology, Netherlands.

van der Bent, H S; van den Brom, P I; Visscher, H J; Meijer, A and Mouter, N (2023) The energy performance of dwellings with heat pumps of Dutch non-profit housing associations. Building Research & Information, 51(2), pp. 192-202. ISSN 0961-3218

Çetin, Sultan (2023) Towards a circular building industry through digitalisation: Exploring how digital technologies can help narrow, slow, close, and regenerate the loops in social housing practice. PhD thesis, Delft University of Technology, Netherlands.