Items with Index Term: relative advantage

Abdulhadi, M A M E (2012) IT adoption in the construction sector in Libya. PhD thesis, University of Glamorgan, UK.

Ahmed, A L (2019) Development of conceptual constructs for organisational BIM adoption and their systematic application within the UK architecture sector. PhD thesis, University of Sheffield, UK.

Ahmed, Y A; Shehzad, H M F; Khurshid, M M; Abbas Hassan, O H; Abdalla, S A and Alrefai, N (2024) Examining the effect of interoperability factors on building information modelling (BIM) adoption in Malaysia. Construction Innovation, 24(2), pp. 606-642. ISSN 1471-4175

Alghadeer, Abdulaziz I (2013) Influence of socio-cultural and technological factors on the adoption of the project management office (pmo) in Saudi Arabia: An innovation diffusion perspective. PhD thesis, Griffith University, Saudi Arabia.

Alhumayani, H (2022) The feasibility of 3D printing technology as a new construction method for houses in Saudi Arabia. PhD thesis, Cardiff University, UK.

Almazroa, D A (2003) Project delivery system decision framework using the weighting factors and analytic hierarchy process methods. PhD thesis, University of Pittsburgh, USA.

Ameyaw, E E; Edwards, D J; Kumar, B; Thurairajah, N; Owusu-Manu, D G and Oppong, G D (2023) Critical factors influencing adoption of blockchain-enabled smart contracts in construction projects. Journal of Construction Engineering and Management, 149(3): 04023003, ISSN 0733-9364

Antillon, E I (2016) An exploration of the influence of public-private-partnerships on the life cycle design decision-making process of highway projects. PhD thesis, University of Colorado at Boulder, USA.

Boutros, M. B. F.; El Hajj, C.; Martínez Montes, G. and Jawad, D. (2026) Managerial perceptions of emerging technology adoption in construction: Evidence from developing countries. Journal of Engineering, Design and Technology, 24(4), pp. 1057-1075. ISSN 1726-0531

Chen, Y.; Liu, Q.; Nie, B. and Luo, X. (2026) Construction safety knowledge reasoning-capable large language model for hydropower and water conservancy engineering. Journal of Construction Engineering and Management, 152(9): 04026132, ISSN 0733-9364

Chen, Y; Yin, Y; Browne, G J and Li, D (2019) Adoption of building information modeling in Chinese construction industry: The technology-organization-environment framework. Engineering, Construction and Architectural Management, 26(9), pp. 1878-1898. ISSN 0969-9988

Falaq Assad, N; Edwards, D J; Shelbourn, M; Martek, I; Wellington Didibhuku Didibhuku, T and El-Gohary, H (2021) Comparison of modular and traditional UK housing construction: A bibliometric analysis. Journal of Engineering, Design and Technology, 19(1), pp. 164-186. ISSN 1726-0531

Geh, N; Emuze, F and Das, D K (2023) Drivers of solar photovoltaic deployment in South African public universities: A Delphi study. Smart and Sustainable Built Environment, 12(2), pp. 407-434. ISSN 2046-6099

Gledson, B (2015) Investigating the diffusion of 4D BIM innovation. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hamdan, Azreen Sharina (2025) Developing a tailored framework for digital transformation in UK small, micro and medium construction enterprises: Evidence from greater manchester. PhD thesis, University of Salford, UK.

Heaphy, I (2013) NEC versus fidic. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(1), pp. 21-30. ISSN 17514304

Louw, M P (2016) The adaptive reuse of industrial structures: Revisiting the Thesen Islands power station project in South Africa. Journal of Engineering, Design and Technology, 14(4), pp. 920-940.

Mararo, I. M.; Babafemi, A. J. and Aigbavboa, C. (2026) Towards understanding the perceptions of 3D construction printing in Kenya. International Journal of Construction Management, 26(7), pp. 1320-1340. ISSN 1562-3599

Martin, H; Garner, M; Manewa, A and Chadee, A (2025) Validating the relative importance of technology diffusion barriers– exploring modular construction design-build practices in the UK. International Journal of Construction Education and Research, 21(1), pp. 3-23. ISSN 1557-8771

Mund, A T (2002) An evaluation framework for exterior envelope wall systems for the homebuilding industry. PhD thesis, Arizona State University, USA.

Nisbet, P (1995) Dualism, flexibility and self-employment in the UK construction industry. PhD thesis, University of Bath, UK.

Omobhude, O C (2019) Inclusive policy making process for sustainable development: Empirical cases of oil and infrastructure sectors in Nigeria. PhD thesis, National Yang Ming Chiao Tung University, Taiwan R.O.C..

Oyuga, J O; Gwaya, A and Njuguna, M B (2023) Investigation of the current usage of BIM capabilities by large-sized building contractors in Kenya based on theory of innovation diffusion. Construction Innovation, 23(1), pp. 155-177. ISSN 1471-4175

Pan, M and Pan, W (2020) Understanding the determinants of construction robot adoption: Perspective of building contractors. Journal of Construction Engineering and Management, 146(5): 04020040, ISSN 0733-9364

Pathania, A K; Goyal, B and Saini, J R (2017) Diffusion of adoption of solar energy: a structural model analysis. Smart and Sustainable Built Environment, 6(2), pp. 66-83. ISSN 2046-6099

Pinti, Lidia (2019) BIM-based facility management: Embedded information management for maintenance: Building information modelling and database integration for the Italian public administration. PhD thesis, Politecnico di Milano, Italy.

Ram, J; Afridi, N K and Khan, K A (2019) Adoption of big data analytics in construction: Development of a conceptual model. Built Environment Project and Asset Management, 9(4), pp. 564-579. ISSN 2044-124X

Saad, A M; Dulaimi, M; Zulu, S L and Gorse, C (2025) Are the characteristics of public clients influencing their uptake of the modern methods of construction? A thematic analysis. Smart and Sustainable Built Environment, 14(1), pp. 190-209. ISSN 2046-6099

Sauer, A D (2013) Sustainable building codes: How the perceptions of building code officials influence their intent to adopt the international green construction code. PhD thesis, Indiana State University, USA.

Seed, L (2015) The dynamics of BIM adoption: a mixed methods study of BIM as an innovation within the United Kingdom construction industry. PhD thesis, University of Huddersfield, UK.

Sila, N.; Agumba, J. N. and Adebowale, O. J. (2026) BIM adoption predictors for health and safety management among construction SMEs. Construction Innovation, 26(4), pp. 961-983. ISSN 1471-4175

Steel, A C (1985) The diffusion of working time innovations in manufacturing and construction industry. PhD thesis, Brunel University, UK.

Wang, W; Gao, S; Mi, L; Xing, J; Shang, K; Qiao, Y; Fu, Y; Ni, G and Xu, N (2021) Exploring the adoption of BIM amidst the COVID-19 crisis in China. Building Research & Information, 49(8), pp. 930-947. ISSN 0961-3218

Whalen, T M; Gopal, S and Abraham, D M (2004) Cost-benefit model for the construction of tornado shelters. Journal of Construction Engineering and Management, 130(6), pp. 772-779. ISSN 0733-9364

Xia, P; Xu, F; Zhou, T and Du, J (2022) Benchmarking human versus robot performance in emergency structural inspection. Journal of Construction Engineering and Management, 148(8): 04022070, ISSN 0733-9364

Yuan, M; Li, Z; Li, X; Luo, X; Yin, X and Cai, J (2023) Proposing a multifaceted model for adopting prefabricated construction technology in the construction industry. Engineering, Construction and Architectural Management, 30(2), pp. 755-786. ISSN 0969-9988

Zhong, Z and Gou, Z (2023) Adopting cross-laminated timber in architectural design to reduce embodied carbon emission in China based on the diffusion of innovation theory. Building Research & Information, 51(7), pp. 834-852. ISSN 0961-3218