Items with Index Term: reinforcement

Abdelaal, A; Ma, J; Zhang, H; Shobeiri, V and Xie, Y M (2026) Bio-stabilized modular rammed earth blocks for sustainable and aesthetic construction. Construction Innovation, 26(9), pp. 1-20. ISSN 1471-4175

Abuhishmeh, K S K (2023) Risk assessment of reinforced concrete sewer pipes under external loading and adverse environmental conditions using an adaptive neuro-fuzzy system. PhD thesis, University of Texas at Arlington, USA.

Ahmad, S; Soetanto, R and Goodier, C (2019) Lean approach in precast concrete component production. Built Environment Project and Asset Management, 9(3), pp. 457-470. ISSN 2044-124X

Ahmed, M O and El-adaway, I H (2023) An integrated game-theoretic and reinforcement learning modeling for multi-stage construction and infrastructure bidding. Construction Management and Economics, 41(3), pp. 183-207. ISSN 01446193

Ailabouni, N (2010) Factors affecting employee productivity in the UAE construction industry. PhD thesis, University of Brighton, UK.

Ailabouni, N; Painting, N and Ashton, P (2009) Factors affecting employee productivity in the UAE construction industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ali, G M; Bouferguene, A and Al-Hussein, M (2023) Crane mat layout optimization based on agent-based greedy and reinforcement-learning approach. Journal of Construction Engineering and Management, 149(8): 04023067, ISSN 0733-9364

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Alkoc, E and Erbatur, F (1998) Site expert: A prototype knowledge-based expert system. Engineering, Construction and Architectural Management, 5(3), pp. 238-251. ISSN 0969-9988

Almasabha, G; Shehadeh, A; Alshboul, O and Al Hattamleh, O (2024) Structural performance of buried reinforced concrete pipelines under deep embankment soil. Construction Innovation, 24(5), pp. 1280-1296. ISSN 1471-4175

Alrefaie, A M; Abdul-Samad, Z; Salleh, H; Alashwal, A M and Amos, D (2023) Modelling labour productivity of reinforcement bar using polynomial regression: A study on a tropical country's weather. International Journal of Construction Management, 23(10), pp. 1633-1641. ISSN 1562-3599

Amarasinghe, A A S R; Agdas, D and Dawes, L (2025) Evaluating labour productivity and profitability in precast concrete manufacturing. Engineering, Construction and Architectural Management, 32(13), pp. 148-173. ISSN 0969-9988

Amarasinghe, Sam (2025) Performance optimizing for precast concrete construction. PhD thesis, Queensland University of Technology, Australia.

Araujo, Luís Otávio Cocito de (2005) Method to propose directions improving labor productivity in the steel reinforcement activities. PhD thesis, Universidade de São Paulo, Brazil.

Arora, J; Kar, S and Jha, K N (2023) Assessment of the significance of identified attributes affecting the rebar-fixing productivity using multiple regression. Journal of Construction Engineering and Management, 149(6): 04023039, ISSN 0733-9364

Asghari, V; Wang, Y; Biglari, A J; Hsu, S C and Tang, P (2022) Reinforcement learning in construction engineering and management: A review. Journal of Construction Engineering and Management, 148(11): 03122009, ISSN 0733-9364

Ataei, S and Jafari, A (2026) Comparative environmental impact assessment of 3D concrete printing and precast techniques in bridge construction: A case study analysis. Journal of Construction Engineering and Management, 152(1): 05025018, ISSN 0733-9364

Aviram Traubita, A (2009) Structural response and cost characterization of bridge construction using seismic performance enhancement strategies. PhD thesis, University of California, Berkeley, USA.

Avrithi, K. (2026) Resilience of infrastructure for midsized cities against flooding: A case study. International Journal of Disaster Resilience in the Built Environment, pp. 1-16. ISSN 1759-5908

Balasubramanian, V and Prasad, G S (2007) Manual bar bending-an occupational hazard for construction workers in developing nations. Journal of Construction Engineering and Management, 133(10), pp. 791-797. ISSN 0733-9364

Barker, H (1989) Use of geotextiles and geocomposites in the united kingdom. Journal of Construction Engineering and Management, 115(2), pp. 258-269. ISSN 0733-9364

Barour, S and Zergua, A (2021) Numerical analysis of reinforced concrete beams strengthened in shear using carbon fiber reinforced polymer materials. Journal of Engineering, Design and Technology, 19(2), pp. 339-357. ISSN 1726-0531

Bencze, O C; Dasmohapatra, S and Tilotta, D C (2012) A concept for a performance-based rating system for home resilience: ReScU. International Journal of Disaster Resilience in the Built Environment, 3(2), pp. 148-165. ISSN 1759-5916

Benjaoran, V; Dawood, N and Scott, D (2004) Bespoke precast productivity estimation with neural network model. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Bernold, L E and Chang, P (1992) Potential gains through welded-wire fabric reinforcement. Journal of Construction Engineering and Management, 118(2), pp. 244-257. ISSN 0733-9364

Bernold, L E and Salim, M (1993) Placement-oriented design and delivery of concrete reinforcement. Journal of Construction Engineering and Management, 119(2), pp. 323-335. ISSN 0733-9364

Bhavya Swathi, I; Suvarna Raju, L and Ramulu, P J (2020) Surface development by reinforcing nano-composites during friction stir processing: A review. Journal of Engineering, Design and Technology, 18(3), pp. 653-687. ISSN 1726-0531

Bruno, Silvana (2019) The implementation of automatic diagnostics and monitoring towards diagnosis-aided historic building information modelling and management. PhD thesis, Politecnico di Bari, Italy.

Burrows, B G and Seymour, D E (1983) The evaluation of change in the construction industry. Construction Management and Economics, 1(3), pp. 199-215. ISSN 01446193

Cattaneo, S and Mola, F (2012) Assessing the quality control of self-consolidating concrete properties. Journal of Construction Engineering and Management, 138(2), pp. 197-205. ISSN 0733-9364

Chabbi, R; Ferhoune, N and Bouabdallah, F (2023) Diagnostic of degraded reinforced concrete bridges explaining the environmental condition effect and reinforcement method. International Journal of Building Pathology and Adaptation, 41(4), pp. 825-848. ISSN 23984708

Chinowsky, P S and Javernick-Will, A (2020) High-value, collaborative networks. Construction Management and Economics, 38(4), pp. 398-408. ISSN 01446193

Collins, W and Redden, L (2021) Improving student’s estimating abilities through experiential learning. International Journal of Construction Education and Research, 17(2), pp. 117-132. ISSN 1557-8771

Cote, B; Robinson, B; Gabr, M A and Borden, R H (2013) Performance-cost analysis of stabilized undercut subgrades. Journal of Construction Engineering and Management, 139(2), pp. 121-127. ISSN 0733-9364

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2022) Overcoming the limitations of the green pyramid rating system in the Egyptian construction industry: A critical analysis. Architectural Engineering and Design Management, 18(2), pp. 114-127. ISSN 1745-2007

Das, D K (2020) Perspectives of smart cities in South Africa through applied systems analysis approach: A case of Bloemfontein. Construction Economics and Building, 20(2), pp. 65-88. ISSN 2204-9029

De La Fuente, A; Casanovas-Rubio, M D M; Pons, O and Armengou, J (2019) Sustainability of column-supported RC slabs: Fiber reinforcement as an alternative. Journal of Construction Engineering and Management, 145(7): 04019042, ISSN 0733-9364

Devine, R D; Barbachyn, S M; Thrall, A P and Kurama, Y C (2018) Effect of tripping prefabricated rebar assemblies on bar spacing. Journal of Construction Engineering and Management, 144(11): 04018099, ISSN 0733-9364

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Donadon, Bruno Fazendeiro (2024) Analysis of the mechanical behavior of glued laminated timber beams reinforced with synthetic and natural fibers. PhD thesis, Universidade Estadual de Campinas, Brazil.

Ekström, D (2019) Integrated structural and construction engineering: a study of project team performance in Swedish bridge design. PhD thesis, Chalmers University of Technology, Sweden.

El-Kholy, A M; Tahwia, A M and Elsayed, M M (2022) Prediction of simulated cost contingency for steel reinforcement in building projects: ANN versus regression-based models. International Journal of Construction Management, 22(9), pp. 1675-1689. ISSN 1562-3599

El-Razek, M E A (1999) New method for construction of diaphragm walls. Journal of Construction Engineering and Management, 125(4), pp. 233-241. ISSN 0733-9364

Fan, X (2024) Artificial intelligence aided resilient and sustainable water infrastructure systems. PhD thesis, Case Western Reserve University, USA.

Feng, K (2022) Infrastructure resilience and management under changing tropical cyclone risk. PhD thesis, Princeton University, USA.

Ferguson, M (2020) Improving mobile robot navigation with dynamic building information models and stochastic neural control. PhD thesis, Stanford University, USA.

Flores Salas, A (2016) Evaluation of the use of lightweight concrete panels for post disaster house reconstruction using Building Information Modelling. PhD thesis, University of Manchester, UK.

Galanis, P (2014) Probabilistic methods to identify seismically hazardous older-type concrete frame buildings. PhD thesis, University of California, Berkeley, USA.

Ghavidel, A (2025) AI-informed multi-threat decision-support methodology for long-term bridge asset management. PhD thesis, University of Texas at San Antonio, USA.

Grosskopf, K R (2004) Teaching methods improvement using industry focus groups: A case study in construction financing. International Journal of Construction Education and Research, 1(1), pp. 13-25. ISSN 1557-8771

Hadizadeh-Bazaz, M.; Navarro, I. J. and Yepes, V. (2026) Smart integration of non-destructive damage detection and life-cycle assessment for sustainable maintenance of coastal bridges. Smart and Sustainable Built Environment, pp. 1-27. ISSN 2046-6099

Haroglu, H (2010) Investigating the structural frame decision making process. EngD thesis, Loughborough University, UK.

Hayette, F; Abadou, Y and Ghrieb, A (2021) Bio-waste influence on air lime mortar performance corrosion: optimization using the surface response method. Journal of Engineering, Design and Technology, 19(5), pp. 1124-1137. ISSN 1726-0531

Hossain, J B and Kusakabe, K (2005) Sex segregation in construction organizations in Bangladesh and Thailand. Construction Management and Economics, 23(6), pp. 609-619. ISSN 01446193

Hosseinian, S M; Younesi, S; Razini, S and Carmichael, D G (2022) Intelligent stochastic agent-based model for predicting truck production in construction sites by considering learning effect. Journal of Construction Engineering and Management, 148(5): 04022018, ISSN 0733-9364

Hoxley, M and Rowsell, R (2006) Using video in the construction technology classroom: Encouraging active learning. Architectural Engineering and Design Management, 2(1-2), pp. 115-122. ISSN 1745-2007

Hsu, P. Y. (2026) Reinforcement learning framework for just-in-time material ordering in urban construction: Development, evaluation, and real-time deployment. Journal of Construction Engineering and Management, 152(9): 04026157, ISSN 0733-9364

Hsu, P. Y. (2026) Reinforcement learning framework for just-in-time material ordering in urban construction: Development, evaluation, and real-time deployment. Journal of Construction Engineering and Management, 152(9): 04026157, ISSN 0733-9364

Hulshizer, A J and Desai, A J (1984) Shock vibration effects on freshly placed concrete. Journal of Construction Engineering and Management, 110(2), pp. 266-285. ISSN 0733-9364

Ibe, C. N. (2026) Optimising sustainable deconstruction strategies for concrete structures: A multi-criteria decision-making framework approach. International Journal of Building Pathology and Adaptation, 44(3), pp. 773-788. ISSN 2398-4708

Indrastuti (2014) Unit cost modelling of public building project in Kepulauan Riau, Indonesia. PhD thesis, University of Malaya, Malaysia.

Jadidoleslami, S. and Saghatforoush, E. (2026) Interdependencies unveiled: MICMAC analysis of BIM-AI synergies in construction. Journal of Construction Engineering and Management, 152(7): 04026086, ISSN 0733-9364

Jarkas, A M (2005) An investigation into the influence of buildability factors on productivity of in situ reinforced concrete construction. PhD thesis, University of Dundee, UK.

Jarkas, A M (2010) The influence of buildability factors on rebar fixing labour productivity of beams. Construction Management and Economics, 28(5), pp. 527-543. ISSN 1466433X

Jarkas, A M (2010) The effects of buildability factors on rebar fixing labour productivity of isolated foundations. International Journal of Construction Management, 10(2), pp. 33-51. ISSN 1562-3599

Jarkas, A M (2012) Influence of buildability factors on rebar installation labor productivity of columns. Journal of Construction Engineering and Management, 138(2), pp. 258-267. ISSN 0733-9364

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Risk allocation model for price escalations in construction projects: Integrating bargaining game theory and probabilistic Bayesian modeling. Journal of Construction Engineering and Management, 151(9): 04025134, ISSN 0733-9364

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Modeling framework to quantify and gauge project cost risks due to construction material price volatilities using predictive probabilistic deep-learning algorithms and stochastic risk modeling. Journal of Construction Engineering and Management, 151(7): 04025071, ISSN 0733-9364

Ju, C; Ning, Y and Shen, Y (2025) How do different management control configurations influence construction safety professionals' work attitudes. Engineering, Construction and Architectural Management, 32(5), pp. 2870-2889. ISSN 0969-9988

Kar, S (2021) Developing a decision support system for effective material management in construction. PhD thesis, Indian Institute of Technology Delhi, India.

Kar, S and Jha, K N (2022) Assessing criticality of construction materials for prioritizing their procurement using ANP-TOPSIS. International Journal of Construction Management, 22(10), pp. 1852-1862. ISSN 1562-3599

Kedarisetty, S (2025) Pavement management systems in local governments. PhD thesis, University of California, Davis, USA.

Komolafe, M O; Oyewole, M O and Kolawole, J T (2016) Extent of incorporation of green features in office properties in Lagos, Nigeria. Smart and Sustainable Built Environment, 5(3), pp. 232-260. ISSN 2046-6099

Kuittinen, M (2016) Does the use of recycled concrete lower the carbon footprint in humanitarian construction? International Journal of Disaster Resilience in the Built Environment, 7(5), pp. 472-488. ISSN 1759-5916

Kumar, S; Singh, L K; Roy, L B; Kumar, R and Lal, D (2025) Enhancing the sustainability of slope stability in embankment construction by leveraging smart sensors and monitoring systems for data-driven insights. International Journal of Construction Management, 25(16), pp. 2102-2120. ISSN 1562-3599

Kuttantharappel Soman, R (2020) Automated look-ahead schedule generation using linked-data based constraint checking for construction projects. PhD thesis, Imperial College London, UK.

Kylili, A; Georgali, P Z; Christou, P and Fokaides, P (2024) An integrated building information modeling (BIM)-based lifecycle-oriented framework for sustainable building design. Construction Innovation, 24(2), pp. 492-514. ISSN 1471-4175

Le Gallais, Tricia Anne (2006) Building identities in FE: A case study of construction lecturers. PhD thesis, Birmingham City University, UK.

Lees, H and Austin, J (2011) The case for behaviour-based safety in construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(1), pp. 3-8. ISSN 17514312

Li, Y and Zhong, R Y (2026) Spatial-temporal traceability and coordination in modular integrated construction: A future framework with hybrid digital twin and reinforcement learning. International Journal of Construction Management, 26(5), pp. 875-904. ISSN 1562-3599

Li, J; Zhou, G; Li, D; Zhang, M and Zhao, X (2023) Recognizing workers' construction activities on a reinforcement processing area through the position relationship of objects detected by faster r-CNN. Engineering, Construction and Architectural Management, 30(4), pp. 1657-1678. ISSN 0969-9988

Li, M (2024) Dfma-oriented rebar design optimization for reinforced concrete structures using graph neural network. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Li, M; Zheng, Q and Ashuri, B (2024) Application of artificial intelligence in design automation: A two-stage framework for structure configuration and design. Journal of Construction Engineering and Management, 150(8): 04024083, ISSN 0733-9364

Li, Y; Wang, J; Cao, L; Wei, D and Wang, Y (2022) Three-step mathematical model for optimizing rebar cutting-stock with practical application. Journal of Construction Engineering and Management, 148(7): 04022043, ISSN 0733-9364

Liang, C-J (2021) Affecting fundamental transformation in future construction work through replication of the master-apprentice learning model in human-robot worker teams. PhD thesis, University of Michigan, USA.

Lim, E C (1996) The analysis of productivity in building construction. PhD thesis, Loughborough University, UK.

Lindgren, J and Widén, K (2018) Diffusing building information management-knowledge integration, mechanisms and knowledge development. Architectural Engineering and Design Management, 14(5), pp. 347-362. ISSN 1745-2007

Lingard, H; Raj, I S; Lythgo, N; Troynikov, O and Fitzgerald, C (2019) The impact of tool selection on back and wrist injury risk in tying steel reinforcement bars: A single case experiment. Construction Economics and Building, 19(1), pp. 1-19. ISSN 2204-9029

Liu, H (2017) The impact of owner practices and procedures on construction project safety performance. PhD thesis, University of Kentucky, USA.

Liu, L and Wan, S (2024) Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers. International Journal of Building Pathology and Adaptation, 42(6), pp. 1126-1146. ISSN 2398-4708

Loosemore, M and Bridgeman, J (2017) Corporate volunteering in the construction industry: Motivations, costs and benefits. Construction Management and Economics, 35(10), pp. 641-653. ISSN 01446193

Lundgren, R.; Kyrö, R.; Toivonen, S. and Tähtinen, L. (2025) Reimagining circularity: Actions for optimising the use of existing buildings. Buildings & Cities, 6(1), pp. 674-694. ISSN 2632-6655

Lundman, P (2011) Cost management for underground infrastructure projects a case study on cost increase and its causes. PhD thesis, Luleå University of Technology, Sweden.

Löwstedt, M and Räisänen, C (2014) Social identity in construction: Enactments and outcomes. Construction Management and Economics, 32(11), pp. 1093-1105. ISSN 01446193

Mahamid, I (2022) Impact of rework on material waste in building construction projects. International Journal of Construction Management, 22(8), pp. 1500-1507. ISSN 1562-3599

Manoharan, K; Dissanayake, P; Pathirana, C; Deegahawature, D and Silva, R (2023) A competency-based training guide model for labourers in construction. International Journal of Construction Management, 23(8), pp. 1323-1333. ISSN 1562-3599

Manoharan, K; Dissanayake, P; Pathirana, C; Deegahawature, D and Silva, R (2024) A training guide for the reinforcement of continuous professional development of engineers and project managers on performance and productivity improvement practices in construction. International Journal of Construction Management, 24(13), pp. 1475-1484. ISSN 1562-3599

Mansor, M; Zakariya, K and Harun, N Z (2019) Challenges on use of recreational parks in Kuala Lumpur. Journal of Construction in Developing Countries, 24(1), pp. 141-162. ISSN 1823-6499

Marzouk, M; Said, H and El-Said, M (2009) Framework for multiobjective optimization of launching girder bridges. Journal of Construction Engineering and Management, 135(8), pp. 791-800. ISSN 0733-9364

Masih, S and Kar, S (2025) Assessing social sustainability for multimodal activities in construction: An FAHP-TOPSIS approach. Journal of Construction Engineering and Management, 151(12): 04025210, ISSN 0733-9364

Maurya, T; Kalita, J D and Kar, S (2026) Assessing safety scores of multimodal activities to integrate safety into construction planning. Journal of Construction Engineering and Management, 152(5): 04026039, ISSN 0733-9364

Melhem, N N; Maher, R A and Sundermeier, M (2021) Waste-based management of steel reinforcement cutting in construction projects. Journal of Construction Engineering and Management, 147(7): 04021056, ISSN 0733-9364

Mensah, I; Adjei-Kumi, T and Nani, G (2016) Duration determination for rural roads using the principal component analysis and artificial neural network. Engineering, Construction and Architectural Management, 23(5), pp. 638-656. ISSN 0969-9988

Navon, R; Shapira, A and Shechori, Y (2000) Automated rebar constructability diagnosis. Journal of Construction Engineering and Management, 126(5), pp. 389-397. ISSN 0733-9364

Nepal, Jaya (2015) Reliability-based performance assessment and optimum maintenance of corroded reinforced concrete structures. PhD thesis, University of Greenwich, UK.

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) A review of the advanced treatment techniques for enriching the recycled concrete aggregates for recycled-based concrete: Economic, environmental and technical analysis. Smart and Sustainable Built Environment, 13(3), pp. 560-583. ISSN 2046-6099

Niskanen, T (1993) Accident risks and preventive measures in materials handling at construction sites. DrTech thesis, Teknillinen Korkeakoulu (Helsinki), Finland.

Pakkala, T A; Köliö, A; Lahdensivu, J and Pentti, M (2019) Predicted corrosion rate on outdoor exposed concrete structures. International Journal of Building Pathology and Adaptation, 37(5), pp. 679-698. ISSN 23984708

Pandimani, M R; Ponnada, M R and Geddada, Y (2024) Finite-element modeling of partially prestressed concrete beams with unbonded tendon under monotonic loadings. Journal of Engineering, Design and Technology, 22(1), pp. 235-256. ISSN 1726-0531

Parisi, F; Sangiorgio, V; Parisi, N; Mangini, A M; Fanti, M P and Adam, J M (2024) A new concept for large additive manufacturing in construction: Tower crane-based 3D printing controlled by deep reinforcement learning. Construction Innovation, 24(1), pp. 8-32. ISSN 1471-4175

Parthasarathy, M K; Murugasan, R and Murugesan, K (2017) A critical review of factors affecting manpower and equipment productivity in tall building construction projects. Journal of Construction in Developing Countries, 22(S1), pp. 1-18. ISSN 1823-6499

Peng, J L (2004) Structural modeling and design considerations for double-layer shoring systems. Journal of Construction Engineering and Management, 130(3), pp. 368-377. ISSN 0733-9364

Ponnada, M R and Geddada, Y (2023) Nonlinear modelling and finite element analysis on the load-bearing capacity of RC beams with considering the bond–slip effect. Journal of Engineering, Design and Technology, 21(4), pp. 945-972. ISSN 1726-0531

Pons, O; Casanovas-Rubio, M M; Armengou, J and De La Fuente, A (2021) Sustainability-driven decision-making model: Case study of fiber-reinforced concrete foundation piles. Journal of Construction Engineering and Management, 147(10): 04021116, ISSN 0733-9364

Porwal, A and Hewage, K N (2012) Building information modeling-based analysis to minimize waste rate of structural reinforcement. Journal of Construction Engineering and Management, 138(8), pp. 943-954. ISSN 0733-9364

Powell, A (2009) The (un)balancing act: The impact of culture on women engineering students' gendered and professional identities. PhD thesis, Loughborough University, UK.

Pridmore, A B (2009) Development of composite renewal systems for rapid rehabilitation and construction of bridge decks. PhD thesis, University of California, San Diego, USA.

Proverbs, D G; Holt, G D and Olomolaiye, P O (1998) A comparative evaluation of reinforcement fixing productivity rates amongst French, German and UK construction contractors. Engineering, Construction and Architectural Management, 5(4), pp. 350-358. ISSN 0969-9988

Proverbs, D G; Holt, G D and Olomolaiye, P O (1999) Construction resource/method factors influencing productivity for high rise concrete construction. Construction Management and Economics, 17(5), pp. 577-587. ISSN 01446193

Proverbs, D G; Holt, G D and Olomolaiye, P O (1999) European construction contractors: A productivity appraisal of in situ concrete operations. Construction Management and Economics, 17(2), pp. 221-230. ISSN 01446193

Pérez, C T and Bastos Costa, D (2021) Increasing production efficiency through the reduction of transportation activities and time using 4D BIM simulations. Engineering, Construction and Architectural Management, 28(8), pp. 2222-2247. ISSN 0969-9988

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Qureshi, A H; Alaloul, W S; Murtiyoso, A; Hussain, S J; Saad, S and Musarat, M A (2024) Automated scaling of point cloud rebar model via aruco-supported controlled markers. Journal of Construction Engineering and Management, 150(3): 04023170, ISSN 0733-9364

Qureshi, A H; Alaloul, W S; Wing, W K; Saad, S; Alzubi, K M and Musarat, M A (2024) Factors affecting the implementation of automated progress monitoring of rebar using vision-based technologies. Construction Innovation, 24(3), pp. 770-789. ISSN 1471-4175

Raduenz, Henrique (2022) On machine learning-based control for energy management in construction machines. PhD thesis, Universidade Federal de Santa Catarina, Brazil.

Raja, J (2016) Reducing the environmental impact of construction through use of geosynthetics. EngD thesis, Loughborough University, UK.

Rankin, J (2023) Reinforcement learning for trench excavation. PhD thesis, Loughborough University, UK.

Rwamamara, R A (2007) Planning the healthy construction workplace through risk assessment and design methods. PhD thesis, Luleå University of Technology, Sweden.

Saleem, M (2024) Internal damage detection in reinforced concrete member using ultrasonic pulse velocity nondestructive testing. Journal of Construction Engineering and Management, 150(8): 04024084, ISSN 0733-9364

Salem, O; Shahin, A and Khalifa, Y (2007) Minimizing cutting wastes of reinforcement steel bars using genetic algorithms and integer programming models. Journal of Construction Engineering and Management, 133(12), pp. 982-992. ISSN 0733-9364

Sandagomika, H; Shringi, A; Mohandes, S R; Kineber, A F; Bazli, M and Arashpour, M (2024) Mixed reality-based approach for minimizing time uncertainty in prefabrication. Journal of Construction Engineering and Management, 150(11): 04024147, ISSN 0733-9364

Sangiorgio, Valentino (2019) Development of a decision support system for the structural degradation analysis of RC buildings supported by user-reported data and modern information technologies. PhD thesis, Politecnico di Bari, Italy.

Sanusi, I E (2019) Optimal and adaptive control frameworks using reinforcement learning for time-varying dynamical systems. PhD thesis, University of Sheffield, UK.

Seymour, D; Shammas-Toma, M and Clark, L (1997) Limitations of the use of tolerances for communicating design requirements to site. Engineering, Construction and Architectural Management, 4(1), pp. 3-22. ISSN 0969-9988

Seymour, D E and Rooke, J D (1998) Construction management research and the attempt to build a social science. Journal of Construction Procurement, 4(1), pp. 59-73. ISSN 1358-9180

Shamsai, M; Whitlatch, E and Sezen, H (2007) Economic evaluation of reinforced concrete structures with columns reinforced with prefabricated cage system. Journal of Construction Engineering and Management, 133(11), pp. 864-870. ISSN 0733-9364

Shaofeng, L; Jincai, F; Pinghua, Z and Xiang, L (2018) Stability analysis of two parallel closely spaced tunnels based on convergence-confinement principle. Journal of Construction Engineering and Management, 144(6): 04018041, ISSN 0733-9364

Shi, Q; Yu, J; Zhang, L; Su, Y; Wang, J and Kong, Q (2025) An optimization model for the duration of workshop production processes for precast concrete components for highway projects. International Journal of Construction Management, 25(7), pp. 813-825. ISSN 1562-3599

Shiha, A; Dorra, E M and Nassar, K (2020) Neural networks model for prediction of construction material prices in Egypt using macroeconomic indicators. Journal of Construction Engineering and Management, 146(3): 04020010, ISSN 0733-9364

Shu, Q.; Boey, K. Z. and Ludwig, F. (2026) Reinforcement learning-driven decision support for target-oriented branch pruning on urban trees. Smart and Sustainable Built Environment, 15(5), pp. 1917-1938. ISSN 2046-6099

Sinclair, C. and Alwan, Z. (2026) Adaptability of concrete blocks, reinforced with recycled plastics: Circular construction approach from the UK. International Journal of Building Pathology and Adaptation, 44(4), pp. 1030-1045. ISSN 2398-4708

Somani, N; Tyagi, Y K and Gupta, N K (2024) An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of cu-sic composites. Journal of Engineering, Design and Technology, 22(1), pp. 77-88. ISSN 1726-0531

Spielholz, P; Davis, G and Griffith, J (2006) Physical risk factors and controls for musculoskeletal disorders in construction trades. Journal of Construction Engineering and Management, 132(10), pp. 1059-1068. ISSN 0733-9364

Stewart, L (2022) Business strategies for reducing professional labor shortages within the u.S. Construction industry. DBA thesis, Walden University, USA.

Subchan, B R; Tayeh, B A; Widayanto, E and Wiswamitra, K A (2024) Bamboo's evolution as a sustainable material: A comprehensive exploration and practical integration as a structural element in concrete, bridge frameworks, and architectural perspectives. Architectural Engineering and Design Management, 20(6), pp. 1566-1588. ISSN 1745-2007

Sun, B; Wu, J; You, H and Du, J (2025) Estimating belief updates in AI-driven drone controls for urban search and rescue operations. Journal of Construction Engineering and Management, 151(9): 04025128, ISSN 0733-9364

Sun, J; Balakrishnan, S and Zhang, Z (2021) A resource allocation framework for predisaster resilience management of interdependent infrastructure networks. Built Environment Project and Asset Management, 11(2), pp. 284-303. ISSN 2044-124X

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Talbot, B (2021) A novel data-driven tool to improve construction schedule accuracy. DProf thesis, Anglia Ruskin University, UK.

Tam, C M; Fung, I W H and Chan, A P C (2001) Study of attitude changes in people after the implementation of a new safety management system: The supervision plan. Construction Management and Economics, 19(4), pp. 393-403. ISSN 01446193

Tam, V W Y and Hao, J J L (2014) Prefabrication as a mean of minimizing construction waste on site. International Journal of Construction Management, 14(2), pp. 113-121. ISSN 1562-3599

Tan, Y; Xu, W; Chen, K; Deng, C and Wang, P (2024) An interactive and collaborative augmented reality environment for civil engineering education: Steel reinforcement bars teaching as an example. Engineering, Construction and Architectural Management, 31(3), pp. 1100-1122. ISSN 0969-9988

Tanko, B. L.; Oakley, J. T.; Jagun, Z. and Madanayake, U. (2026) Comparing 5D BIM costs: Stilt housing against conventional housing for flood management. Journal of Engineering, Design and Technology, 24(2), pp. 361-383. ISSN 1726-0531

Teo, E A L; Ling, F Y Y and Ong, D S Y (2005) Fostering safe work behaviour in workers at construction sites. Engineering, Construction and Architectural Management, 12(4), pp. 410-422. ISSN 0969-9988

Thaesler-Garibaldi, M P (2005) A methodology to develop an integrated engineering system to estimate quantities for bridge repairs at the pre-design stage. PhD thesis, Georgia Institute of Technology, USA.

Thomas, A; Davis, B; Dadi, G B and Goodrum, P M (2013) Case study on the effect of 690 mpa (100 ksi) steel reinforcement on concrete productivity in buildings. Journal of Construction Engineering and Management, 139(11): 4013025, ISSN 0733-9364

Thomas, H R; Horman, M J and De Souza, U E L (2004) Symbiotic crew relationships and labor flow. Journal of Construction Engineering and Management, 130(6), pp. 908-917. ISSN 0733-9364

Thurairajah, N (2013) Leadership practices to address cultural and behavioural challenges in construction partnering projects. PhD thesis, University of Salford, UK.

Tino Balestra, C E; Alessi Reichert, T; Savaris, G; Pansera, W A and Medeiros-Junior, R A (2020) Nondestructive method for estimation of chloride profiles: Correlation between electrical resistivity and holliday-empirical equation. Journal of Construction Engineering and Management, 146(10): 04020119, ISSN 0733-9364

Trethewy, R W (2005) The effect of feedback on risk taking in the Australian construction industry. Journal of Engineering, Design and Technology, 3(2), pp. 109-115. ISSN 1726-0531

Trinh, Hoang T (2021) Optimisation framework for sustainable design of concrete buildings. PhD thesis, Griffith University, Australia.

Troive, S (1998) Structural LCC design of concrete bridges. DrTech thesis, Kungliga Tekniska Hogskolan, Sweden.

Valizadeh Kiamahalleh, M.; Gholampour, A.; Tang, Y. and Ngo, T. D. (2026) Delithiated β-spodumene as a partial cement replacement in waste-based concrete with recycled aggregates and sugarcane fiber. International Journal of Construction Management, 26(10), pp. 2245-2257. ISSN 1562-3599

Wang, D and Wang, Y (2023) The role of regulatory focus and team mindfulness in megaproject conflicts. Engineering, Construction and Architectural Management, 30(2), pp. 714-733. ISSN 0969-9988

Wang, G; Liu, M; Cao, D and Tan, D (2022) Identifying high-frequency–low-severity construction safety risks: An empirical study based on official supervision reports in Shanghai. Engineering, Construction and Architectural Management, 29(2), pp. 940-960. ISSN 0969-9988

Wang, Zhichen (2025) Framework for automated change propagation from building information models to building energy models. PhD thesis, Carnegie Mellon University, USA.

Windapo, A; Moghayedi, A; Oliphant, D and Adediran, A (2018) Exploring the components of cost on construction projects. Journal of Construction Business and Management, 2(2), pp. 42-50. ISSN 2521-0165

Woju, U W and Balu, A S (2020) Time-dependent safety performance of reinforced concrete structures. Journal of Engineering, Design and Technology, 18(5), pp. 1103-1120. ISSN 1726-0531

Wu, J; Ye, Y and Du, J (2024) Autonomous drones in urban navigation: Autoencoder learning fusion for aerodynamics. Journal of Construction Engineering and Management, 150(7): 04024067, ISSN 0733-9364

Xiao, L.; Fan, P.; Shen, G. Q.; Ma, G.; Jia, J. and Zheng, X. (2026) Leveraging deep reinforcement learning to facilitate the transition from knowledge diversity to knowledge creation in construction project teams. Journal of Construction Engineering and Management, 152(10): 04026175, ISSN 0733-9364

Xiong, R (2024) Human-machine adaptation in lean waste elimination for customized building manufacturing systems. PhD thesis, Carnegie Mellon University, USA.

Xu, X (2024) A multi-agent reinforcement learning task allocation framework for navigation sequences of construction robots. PhD thesis, New York University Tandon School of Engineering, USA.

Xu, Z; Guo, X; Zhao, Y and Liu, X (2023) Performance of CFRP-bolted timber joints with slotted-in corrugated steel plates. Journal of Construction Engineering and Management, 149(12): 04023134, ISSN 0733-9364

Yang, C (2004) Knowledge-based understanding and interpretation of construction engineering drawings. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Yang, S; Zhang, J; Xu, S; Deng, T; He, Q and Wang, P (2025) Work section planning for accompanying construction of extra-long tunnel and ballastless track of mountainous high-speed railways. Journal of Construction Engineering and Management, 151(9): 04025126, ISSN 0733-9364

Yao, D (2024) Enhancing cyber risk management in the construction industry. PhD thesis, New York University Tandon School of Engineering, USA.

Yavuz, Z B (2012) Impacts of participant related factors on rebar supply chain performance in SMEs. PhD thesis, Middle East Technical University, Turkey.

Ye, Z; Antwi-Afari, M F; Tezel, A and Manu, P (2025) Building information modeling (BIM) in project management: A bibliometric and science mapping review. Engineering, Construction and Architectural Management, 32(5), pp. 3078-3103. ISSN 0969-9988

Zhan, Z; Dong, Y; Doe, D M; Hu, Y; Li, S; Cao, S; Li, W and Han, Z (2025) Deep learning and blockchain-driven contract theory: Alleviate gender bias in construction. Journal of Construction Engineering and Management, 151(3): 04024216, ISSN 0733-9364

Zhang, C; Zhang, W; Shi, Y; Zhao, T and Zhang, Y (2025) Digital safety navigation for tower crane climbing process from a systematic perspective: Risk identification, safety information requirements, and related intelligent platform. Journal of Construction Engineering and Management, 151(8): 04025096, ISSN 0733-9364

Zhang, J and Jiang, S (2025) Construction safety decision-making system based on improved integration of case-based reasoning and rule-based reasoning. Journal of Construction Engineering and Management, 151(9): 04025130, ISSN 0733-9364

Zhang, K; Li, D; Shen, X; Hou, W; Li, Y and Xue, X (2023) Research on strengthening stone arch bridge with CFRP rebars. International Journal of Building Pathology and Adaptation, 41(5), pp. 1014-1028. ISSN 23984708

Zhao, J. and Xu, Z. (2026) A generalizable deep reinforcement learning-based algorithm for priority rule scheduling in stochastic resource-constrained project scheduling. Journal of Construction Engineering and Management, 152(9): 04026156, ISSN 0733-9364

Zhao, T; Liu, W; Zhang, L and Zhou, W (2018) Cluster analysis of risk factors from near-miss and accident reports in tunneling excavation. Journal of Construction Engineering and Management, 144(6): 04018040, ISSN 0733-9364

Zhou, W (2023) Condition state-based decision making in evolving systems: Applications in asset management and delivery. PhD thesis, George Mason University, USA.

Zhou, Xiaoyan (2023) A reinforcement learning neural network approach to online optimization of construction manufacturing processes. PhD thesis, University of Florida, USA.

Zhu, X (2023) Machine learning supported multiple criteria decision making for project delivery system selection. PhD thesis, Queen's University Belfast, UK.

Zu, L and Liao, W (2025) Reinforcement learning-based multiobjective and multiconstraint production scheduling for precast concrete. Journal of Construction Engineering and Management, 151(8): 04025089, ISSN 0733-9364