Items with Index Term: penetration

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abd Al-Jalil, Y Q (1998) Analysis of performance of tunnel boring machine-based systems. PhD thesis, University of Texas at Austin, USA.

Ahmed, H I (2023) Mechanical behavior, microstructure, and chloride-penetration resistance of glass waste nanopowder magnetic concrete. Journal of Construction Engineering and Management, 149(1): 04022152, ISSN 0733-9364

Al Omari, Mohammad K (2025) Application of the AI-enabled unmanned aerial systems in resolving highway construction claims. PhD thesis, University of Illinois at Chicago, USA.

Al-Jallal, A A (1991) Technology adoption and innovation patterns in construction industry in Saudi Arabia: An exploratory study. PhD thesis, University of Texas at Austin, USA.

Al-Shaeer, H A Y; Irwan, J M; Alshalif, A; Amran, M; Alanazi, H; Tang, W C; Tang, L; Alhokabi, A and Alluqmani, A E (2026) Enhancing carbonation resistance of foamed concrete via microbial incorporation: A response surface methodology approach with aspergillus iizukae ean605 fungi. International Journal of Building Pathology and Adaptation, 44(1), pp. 266-294. ISSN 2398-4708

Andersen, M; Kleindienst, S; Yi, L; Lee, J; Bodart, M and Cutler, B (2008) An intuitive daylighting performance analysis and optimization approach. Building Research & Information, 36(6), pp. 593-607. ISSN 0961-3218

Baharfar, Y; Mohammadyan, M; Moattar, F; Nassiri, P and Behzadi, M H (2022) Indoor pm2.5 concentrations of pre-schools; determining the effective factors and model for prediction. Smart and Sustainable Built Environment, 11(4), pp. 1042-1059. ISSN 2046-6099

Belias, E and Licina, D (2022) Outdoor pm2.5 air filtration: Optimising indoor air quality and energy. Buildings & Cities, 3(1), pp. 186-203. ISSN 2632-6655

Benster, N A (1970) A study and assessment of water penetration and rapid deterioration in existing dwellings-developed as a guide to future building design, production and maintenance management. PhD thesis, University of Manchester Institute of Science and Technology, UK.

Betts, M and Ofori, G (1994) Strategic planning for competitive advantage in construction: The institutions. Construction Management and Economics, 12(3), pp. 203-217. ISSN 01446193

Bonwetsch, T (2015) Robotically assembled brickwork: Manipulating assembly processes of discrete elements. DSc thesis, ETH Zürich, Switzerland.

Buonocore, C; Castro, L; De Vecchi, R; Lamberts, R and Güths, S (2025) Natural ventilation in Brazilian homes: Depicting perceptions, usage patterns and motivations in a questionnaire survey. Building Research & Information, 53(1-2), pp. 40-55. ISSN 0961-3218

Chennarapu, H; Garala, T K; Chennareddy, R; Balunaini, U and Venkata Narasimha Reddy, G (2018) Compaction quality control of earth fills using dynamic cone penetrometer. Journal of Construction Engineering and Management, 144(9): 04018086, ISSN 0733-9364

Cherns, A B and Bryant, D T (1984) Studying the client's role in construction management. Construction Management and Economics, 2(2), pp. 177-184. ISSN 01446193

Chro, A H R (2018) Sustainable renovation of residential buildings in subtropical climate zone. PhD thesis, University of Pécs, Hungary.

Chung, T H (2007) Simulation-based productivity modeling for tunnel construction operations. PhD thesis, University of Alberta, Canada.

Cleveland Jr, A B (2011) Emerging tools to enable construction engineering. Journal of Construction Engineering and Management, 137(10), pp. 836-842. ISSN 0733-9364

Davies, M; Jackaway, A; Hardy, R; Dewey, E and Littler, J (2000) A translucent louvre system: Design concepts, modelling work and monitored data. Building Research & Information, 28(1), pp. 42-50. ISSN 0961-3218

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Duman, D U and Green, S D (2018) Strategizing as identity work: Creating heroes in international contracting. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Dundu, M (2014) Effect of defects on the strength of welds. Journal of Engineering, Design and Technology, 12(4), pp. 410-422.

El-Kelesh, A M; Heniegal, A M and Arnaout, M M (2025) Relative impact of factors affecting penetration rate of horizontal directional drilling. International Journal of Construction Management, 25(13), pp. 1501-1515. ISSN 1562-3599

Flanagan, R; Norman, G and Worrall, H (1995) Trade performance of the UK building materials and components industries. Engineering, Construction and Architectural Management, 2(2), pp. 141-162. ISSN 0969-9988

Francis, A and Thomas, A (2023) System dynamics modelling coupled with multi-criteria decision-making (MCDM) for sustainability-related policy analysis and decision-making in the built environment. Smart and Sustainable Built Environment, 12(3), pp. 534-564. ISSN 2046-6099

Fraser, C and Zarkada-Fraser, A (2001) The philosophy, structure and objectives of research and development in Japan. Construction Management and Economics, 19(8), pp. 831-840. ISSN 01446193

Ganapathy, G P and Haupt, T C (2024) Engineering properties of SBS and crumb-rubber modified bitumen: a design of experiment approach. Journal of Engineering, Design and Technology, 22(6), pp. 1742-1754. ISSN 1726-0531

Gates, M and Scarpa, A (1984) Optimum penetration of friction piles. Journal of Construction Engineering and Management, 110(4), pp. 491-510. ISSN 0733-9364

Gbadegesin, A O; Sun, Y and Nwulu, N I (2021) Stacked value streams of hybrid energy storage systems in prosumer microgrids. Journal of Engineering, Design and Technology, 19(5), pp. 1063-1079. ISSN 1726-0531

Golden, S K (2008) Immigration and construction: An analysis of the impact of immigration on construction project costs. PhD thesis, University of Maryland, College Park, USA.

Hamidane, H; Ababneh, A; Messabhia, A and Xi, Y (2020) Modeling of chloride penetration in concrete structures under freeze-thaw cycles. International Journal of Building Pathology and Adaptation, 38(1), pp. 127-147. ISSN 23984708

Hegab, M; Smith, G R and Salem, O M (2006) Soil penetration modeling in microtunneling projects. Journal of Construction Engineering and Management, 132(6), pp. 598-605. ISSN 0733-9364

Hellowell, M S (2012) Fair return for risk? An examination of structure, competition and profitability in the market for private finance in the National Health Service. PhD thesis, University of Edinburgh, UK.

Hidalgo-Sánchez, F M; Torres-González, M; Mascort-Albea, E J; Canivell, J; Romero-Hernández, R and Martín-del-Río, J J (2023) NDT spatial data integration for monumental buildings: Technical information management for the royal alcazar of seville. Building Research & Information, 51(6), pp. 625-647. ISSN 0961-3218

Holmes, Matthew Ian (2013) The application of structural contingency theory to supply chain management: Developing a strategic model for prefabricated timber systems. PhD thesis, University of Technology Sydney, Australia.

Hoque, M I; Hasan, M and Datta, S D (2026) Undrained shear strength of soft clay reinforced with encapsulated stone dust columns. International Journal of Building Pathology and Adaptation, 44(1), pp. 1-14. ISSN 2398-4708

Jewell, C; Flanagan, R and Lu, W (2014) The dilemma of scope and scale for construction professional service firms. Construction Management and Economics, 32(5), pp. 473-486. ISSN 01446193

Korb, S and Sacks, R (2021) Agent-based simulation of general contractor-subcontractor interactions in a multiproject environment. Journal of Construction Engineering and Management, 147(1): 1944, ISSN 0733-9364

Kreitl, G and Oberndorfer, W J (2004) Motives for acquisitions among engineering consulting firms. Construction Management and Economics, 22(7), pp. 691-700. ISSN 01446193

Laguarda Mallo, M F (2017) Critical factors in the willingness to adopt innovative woodbased building materials in the construction industry: The case of CLT. PhD thesis, University of Minnesota, USA.

Lee, I; Roppel, P; Lawton, M and Ferreira, P (2019) Design limits for framed wall assemblies dependent on material choices for sheathing membranes and exterior insulation. International Journal of Building Pathology and Adaptation, 37(4), pp. 426-447. ISSN 23984708

Li, X; Jin, X; Li, H; Gong, L and Zhou, D (2025) Exploring the impact of policy interventions on project performance through a psm-did approach: Evidence from the Hong Kong construction industry. Engineering, Construction and Architectural Management, 32(2), pp. 1163-1185. ISSN 0969-9988

Lou, Y (2022) Interconnections among energy consumption, carbon emissions, and economic impacts for sustainable buildings. PhD thesis, University of Colorado at Boulder, USA.

Lowe, J G (1987) Monopoly and the materials supply industries of the UK. Construction Management and Economics, 5(1), pp. 57-71. ISSN 01446193

Madushika, U G D and Lu, W (2026) Policy strategies for green retrofitting adoption: A systematic review and future directions. International Journal of Construction Management, 26(5), pp. 805-824. ISSN 1562-3599

Moharrami, S; Bayat, A and Abourizk, S (2022) Modeling microtunnel boring machine penetration rate using a mechanistic approach. Journal of Construction Engineering and Management, 148(11): 04022128, ISSN 0733-9364

Ndukwe, C V; Chan, T K; Gao, G and Liu, J (2021) Development of economic nationalism in Australia and implication for the construction supply chain. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Neshat, N; Hadian, H and Rahimi Alangi, S (2020) Technological learning modelling towards sustainable energy planning. Journal of Engineering, Design and Technology, 18(1), pp. 84-101. ISSN 1726-0531

Nobe, M C (2007) Values and construction waste recycling: An application of the cognitive hierarchy to construction management education. PhD thesis, Colorado State University, USA.

Olatunji, O. A.; Lee, J. J. S.; Chong, H. Y. and Akanmu, A. A. (2021) Building information modelling (BIM) penetration in quantity surveying (qs) practice. Built Environment Project and Asset Management, 11(5), pp. 888-902. ISSN 2044-124X

Oluwole, A O; Jane Jia Suen, L; Heap-Yih, C and Akanmu, A A (2021) Building information modelling penetration in quantity surveying practice. Built Environment Project and Asset Management, 11(5), pp. 888-902. ISSN 2044-124X

Palsodkar, M; Yadav, G and Nagare, M R (2024) Integrating industry 4.0 and agile new product development practices to evaluate the penetration of sustainable development goals in manufacturing industries. Journal of Engineering, Design and Technology, 22(4), pp. 1351-1392. ISSN 1726-0531

Parkhurst, G and Parnaby, R (2008) Growth in mobile air-conditioning: A socio-technical research agenda. Building Research & Information, 36(4), pp. 351-362. ISSN 0961-3218

Perez-Bella, J M; Dominguez-Hernandez, J; Cano-Suñen, E; Del Coz-Diaz, J J and Alvarez Rabanal, F P (2015) Improvement alternatives for determining the watertightness performance of building facades. Building Research & Information, 43(6), pp. 723-736. ISSN 0961-3218

Pérez-Bella, J M; Domínguez-Hernández, J; Rodríguez-Soria, B; Del Coz-Díaz, J J and Cano-Suñén, E (2013) A new method for determining the water tightness of building facades. Building Research & Information, 41(4), pp. 401-414. ISSN 0961-3218

Pérez-Bella, J M; Domínguez-Hernández, J; Rodríguez-Soria, B; del Coz-Díaz, J J; Cano-Suñén, E and Navarro-Manso, A (2013) An extended method for comparing watertightness tests for facades. Building Research & Information, 41(6), pp. 706-721. ISSN 0961-3218

Ready to deleteÓ Broin, E (2016) Modelling drivers of energy demand in the European union building sector. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Rihani, R A (2006) An investigation of critical success factors for robotic masonry. PhD thesis, North Carolina State University, USA.

Robert, O K; Dansoh, A and Ofori-Kuragu, J K (2014) Reasons for adopting public-private partnership (PPP) for construction projects in Ghana. International Journal of Construction Management, 14(4), pp. 227-238. ISSN 1562-3599

Roupé, M (2013) Development and implementations of virtual reality for decision-making in urban planning and building design. PhD thesis, Chalmers University of Technology, Sweden.

Rupp, S H and Plagmann, M (2019) Characterisation of air permeability of common ceiling linings and penetrations. International Journal of Building Pathology and Adaptation, 37(4), pp. 448-460. ISSN 23984708

S. Shehata, A.; M. El-Kelesh, A. and El-Kasaby, E. S. (2026) Effects of ground conditions on utilization factor of slurry tbms in soft ground tunneling. Engineering, Construction and Architectural Management, 33(7), pp. 5275-5299. ISSN 0969-9988

Sarireh, M (2022) Examining the suitability of Tripoli as admixture in cement paste. International Journal of Construction Management, 22(16), pp. 3169-3174. ISSN 1562-3599

Sarireh, M (2023) Testing the use of volcanic tuff in base and sub-base pavement construction in Jordan. International Journal of Construction Management, 23(1), pp. 126-134. ISSN 1562-3599

Satwiko, P; Prasetya, A and Suhedi, F (2019) Noise-reducing vents for windows in warm, humid, tropical countries. Architectural Engineering and Design Management, 15(2), pp. 141-158. ISSN 1745-2007

Shaheen, A A-H I (2005) A framework for integrating fuzzy set theory and discrete event simulation in construction engineering. PhD thesis, University of Alberta, Canada.

Sherrin, C; McAllister, P and Nanda, A (2015) The persistence of distance: A macro-level perspective on European cross-border real estate development flows. Journal of Financial Management of Property and Construction, 20(2), pp. 147-169. ISSN 1366-4387

Sibilla, M and Manfren, M (2022) Envisioning building-as-energy-service in the European context. From a literature review to a conceptual framework. Architectural Engineering and Design Management, 18(4), pp. 495-520. ISSN 1745-2007

Staub-French, S A (2002) Feature-driven activity-based cost estimating. PhD thesis, Stanford University, USA.

Steinhardt, D A and Manley, K (2016) Exploring the beliefs of Australian prefabricated house builders. Construction Economics and Building, 16(2), pp. 27-41. ISSN 2204-9029

Tamate, S; Suemasa, N and Katada, T (2005) Analyses of instability in mobile cranes due to ground penetration by outriggers. Journal of Construction Engineering and Management, 131(6), pp. 689-704. ISSN 0733-9364

Tetteh, M O; Chan, A P C; Darko, A; Yevu, S K; Boateng, E B and Nwaogu, J M (2022) Key drivers for implementing international construction joint ventures (icjvs): Global insights for sustainable growth. Engineering, Construction and Architectural Management, 29(9), pp. 3363-3393. ISSN 0969-9988

Thaheem, Muhammad Jamaluddin (2014) Project risk management for sustainable restoration of immovable cultural heritage: Lessons from construction industry and formulation of a customized prm model. PhD thesis, Politecnico di Torino, Italy.

Tonini de Araújo, M; de Souza, H A and Gomes, A P (2022) Computer simulation of moisture transfer in walls: Impacts on the thermal performance of buildings. Architectural Engineering and Design Management, 18(4), pp. 453-472. ISSN 1745-2007

Torcellini, P; Pless, S and Leach, M (2014) A pathway for net-zero energy buildings: Creating a case for zero cost increase. Building Research & Information, 43(1), pp. 25-33. ISSN 0961-3218

Touran, A and Asai, T (1987) Simulation of tunneling operations. Journal of Construction Engineering and Management, 113(4), pp. 554-568. ISSN 0733-9364

Tsenkova, S (1998) Private housebuilding and housing markets in transitional economies: The case of Bulgaria. PhD thesis, University of Toronto, Canada.

Valitabar, M; GhaffarianHoseini, A; GhaffarianHoseini, A and Attia, S (2022) Advanced control strategy to maximize view and control discomforting glare: A complex adaptive façade. Architectural Engineering and Design Management, 18(6), pp. 829-849. ISSN 1745-2007

Van Linden, S and Van Den Bossche, N (2021) Comparative study on the feasibility of watertight face-sealed building joints under simulated wind-driven rain conditions. Building Research & Information, 49(7), pp. 748-762. ISSN 0961-3218

Wang, J (2020) Building information modeling (BIM) localization: tackling the "last mile" problem in BIM adoption. PhD thesis, University of Hong Kong, Hong Kong.

Wang, J; Wang, G; Li, H; Han, S and Zhang, J (2024) Intelligent construction activity identification for all-weather site monitoring using 4D millimeter-wave technology. Journal of Construction Engineering and Management, 150(11): 04024150, ISSN 0733-9364

Yusoff, W F M; Shaharil, M I; Mohamed, M F; Rasani, M R M; Sapian, A R and Dahlan, N D (2023) Review of openings with shading devices at naturally ventilated buildings. Architectural Engineering and Design Management, 19(5), pp. 463-479. ISSN 1745-2007

Zhang, Y; Liu, L; Song, Z; Zhao, Y and He, S (2024) Enhancing tunnel boring machine penetration rate predictions through particle swarm optimization and elman neural networks. Journal of Construction Engineering and Management, 150(9): 04024116, ISSN 0733-9364