Items with Index Term: occupational safety

Abudayyeh, O; Federicks, T; Palmquist, M and Torres, H N (2003) Analysis of occupational injuries and fatalities in electrical contracting industry. Journal of Construction Engineering and Management, 129(2), pp. 152-158. ISSN 0733-9364

Al-Khiami, M. I.; Lindhard, S. M. and Wandahl, S. (2026) Cross-cultural analysis of movement patterns and work-related musculoskeletal disorders in Danish and Kuwaiti construction: Implications for targeted exoskeleton design. International Journal of Construction Management, 26(8), pp. 1690-1706. ISSN 1562-3599

Alsharef, A F A (2022) Leveraging data analytics to improve construction operations and occupational safety. PhD thesis, North Carolina State University, USA.

Balasubramanian, V and Prasad, G S (2007) Manual bar bending-an occupational hazard for construction workers in developing nations. Journal of Construction Engineering and Management, 133(10), pp. 791-797. ISSN 0733-9364

Baradan, S and Usmen, M A (2006) Comparative injury and fatality risk analysis of building trades. Journal of Construction Engineering and Management, 132(5), pp. 533-539. ISSN 0733-9364

Beavers, J E; Moore, J R and Schriver, W R (2009) Steel erection fatalities in the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 227-234. ISSN 0733-9364

Bhagwat, K and Venkata Santosh Kumar, D (2022) A systematic review of construction safety research: Quantitative and qualitative content analysis approach. Built Environment Project and Asset Management, 12(2), pp. 243-261. ISSN 2044-124X

Bhandari, S; Hallowell, M R; Boven, L V; Welker, K M; Golparvar-Fard, M and Gruber, J (2020) Using augmented virtuality to examine how emotions influence construction-hazard identification, risk assessment, and safety decisions. Journal of Construction Engineering and Management, 146(2): 04019102, ISSN 0733-9364

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Cakan, H; Kazan, E and Usmen, M (2014) Investigation of factors contributing to fatal and non-fatal roofer fall accidents. International Journal of Construction Education and Research, 10(4), pp. 300-317. ISSN 1557-8771

Casanovas-Rubio, M D M; Armengou, J and Ramos, G (2014) Occupational risk index for assessment of risk in construction work by activity. Journal of Construction Engineering and Management, 140(1): 04013035, ISSN 0733-9364

Chan, A P C; Wong, F K W; Chan, D W M; Yam, M C H; Kwok, A W K; Lam, E W M and Cheung, E (2008) Work at height fatalities in the repair, maintenance, alteration, and addition works. Journal of Construction Engineering and Management, 134(7), pp. 527-535. ISSN 0733-9364

Charuvil Elizabeth, R M; Sattari, F; Lefsrud, L and Gue, B (2025) Reducing serious injuries and fatalities in industrial construction-application of machine learning to analyze emotional intelligence and psychosocial factors. International Journal of Construction Management, 25(12), pp. 1404-1414. ISSN 1562-3599

Chellappa, V and Salve, U R (2025) Exploring causes of falls and preventive measures in vertical formwork operations in Indian construction. Built Environment Project and Asset Management, 15(6), pp. 1089-1105. ISSN 2044-124X

Chua, D K H and Goh, Y M (2004) Incident causation model for improving feedback of safety knowledge. Journal of Construction Engineering and Management, 130(4), pp. 542-551. ISSN 0733-9364

Chua, D K H and Goh, Y M (2005) Poisson model of construction incident occurrence. Journal of Construction Engineering and Management, 131(6), pp. 715-722. ISSN 0733-9364

Cokeham, M and Tutesigensi, A (2013) An investigation of construction accidents in Rwanda: Perspectives from Kigali. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(4), pp. 179-187. ISSN 17514312

Dong, M H (1981) Assessment of Occupational Safety and Health Act of 1970: A case analysis of retrospective work injury data. DPA thesis, University of Southern California, USA.

Dorji, K and Hadikusumo, B H W (2006) Safety management practices in the Bhutanese construction industry. Journal of Construction in Developing Countries, 11(2), pp. 53-75. ISSN 1823-6499

Evia, C (2011) Localizing and designing computer-based safety training solutions for Hispanic construction workers. Journal of Construction Engineering and Management, 137(6), pp. 452-459. ISSN 0733-9364

Gambatese, J A; Behm, M and Hinze, J W (2005) Viability of designing for construction worker safety. Journal of Construction Engineering and Management, 131(9), pp. 1029-1036. ISSN 0733-9364

Gholizadeh, P (2022) Analyzing accidents among specialty contractors: A data mining approach. PhD thesis, George Mason University, USA.

Ghosh, S (2014) Does formal daily huddle meetings improve safety awareness? International Journal of Construction Education and Research, 10(4), pp. 285-299. ISSN 1557-8771

Goh, Y M and Chua, D (2013) Neural network analysis of construction safety management systems: A case study in Singapore. Construction Management and Economics, 31(5), pp. 460-470. ISSN 1466433X

Goodrum, P M and Dai, J (2005) Differences in occupational injuries, illnesses, and fatalities among Hispanic and non-Hispanic construction workers. Journal of Construction Engineering and Management, 131(9), pp. 1021-1028. ISSN 0733-9364

Grill, M; Nielsen, K; Grytnes, R; Pousette, A and Törner, M (2019) The leadership practices of construction site managers and their influence on occupational safety: An observational study of transformational and passive/avoidant leadership. Construction Management and Economics, 37(5), pp. 278-293. ISSN 01446193

Guan, Z; Samarasinghe, D A S; Yiu, T W; Reddy, R and Laird, I (2026) Examining the risk factors influencing safety outcomes for Chinese migrant construction workers in New Zealand. Engineering, Construction and Architectural Management, 33(15), pp. 182-202. ISSN 0969-9988

Hadikusumo, B H W and Rowlinson, S (2004) Capturing safety knowledge using design-for-safety-process tool. Journal of Construction Engineering and Management, 130(2), pp. 281-289. ISSN 0733-9364

Hallowell, M R and Gambatese, J A (2010) Population and initial validation of a formal model for construction safety risk management. Journal of Construction Engineering and Management, 136(9), pp. 981-990. ISSN 0733-9364

Hinze, J; Devenport, J N and Giang, G (2006) Analysis of construction worker injuries that do not result in lost time. Journal of Construction Engineering and Management, 132(3), pp. 321-326. ISSN 0733-9364

Hinze, J; Huang, X and Terry, L (2005) The nature of struck-by accidents. Journal of Construction Engineering and Management, 131(2), pp. 262-268. ISSN 0733-9364

Hon, C K H; Chan, A P C and Yam, M C H (2012) Empirical study to investigate the difficulties of implementing safety practices in the repair and maintenance sector in Hong Kong. Journal of Construction Engineering and Management, 138(7), pp. 877-884. ISSN 0733-9364

Huang, X and Hinze, J (2006) Owner's role in construction safety. Journal of Construction Engineering and Management, 132(2), pp. 164-173. ISSN 0733-9364

Huang, X and Hinze, J (2006) Owner's role in construction safety: Guidance model. Journal of Construction Engineering and Management, 132(2), pp. 174-181. ISSN 0733-9364

Ikuma, L H; Nahmens, I and James, J (2011) Use of safety and lean integrated kaizen to improve performance in modular homebuilding. Journal of Construction Engineering and Management, 137(7), pp. 551-560. ISSN 0733-9364

Inyang, N; Al-Hussein, M; El-Rich, M and Al-Jibouri, S (2012) Ergonomic analysis and the need for its integration for planning and assessing construction tasks. Journal of Construction Engineering and Management, 138(12), pp. 1370-1376. ISSN 0733-9364

Jeelani, I; Albert, A; Han, K and Azevedo, R (2018) Are visual search patterns predictive of hazard recognition performance? Empirical investigation using eye-tracking technology. Journal of Construction Engineering and Management, 145(1): 04018115, ISSN 0733-9364

Johnson, B T (2007) Exploring the use of virtual construction to capture knowledge and reduce waste for residential projects. PhD thesis, Colorado State University, USA.

Karim, M T; Ahmed, S; Hoque, M N; Iorio, J and Abudayyeh, O (2025) Evaluating the management's role in addressing gender and racial disparities to promote DEI in the US construction industry: Exploratory study. Journal of Construction Engineering and Management, 151(9): 05025010, ISSN 0733-9364

Kazar, G and Comu, S (2021) Effectiveness of serious games for safety training: A mixed method study. Journal of Construction Engineering and Management, 147(8): 04021091, ISSN 0733-9364

Khalid, U (2022) Investigation into the development of a human reliability analysis framework for the safety management of construction projects. PhD thesis, Nottingham Trent University, UK.

Lan, Roy Uzoma (2025) Advancing workplace safety through intelligent monitoring: Applications of artificial intelligence and computer vision in high-risk industrial environments. PhD thesis, The University of Texas at San Antonio, USA.

Lee, J; Lorenc, S J and Bernold, L E (2003) Comparative performance evaluation of tele-operated pipe laying. Journal of Construction Engineering and Management, 129(1), pp. 32-40. ISSN 0733-9364

Lingard, H and Yesilyurt, Z (2003) The effect of attitudes on the occupational safety actions of Australian construction workers: The results of a field study. Journal of Construction Research, 4(1), pp. 59-69. ISSN 1609-9451

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Melzner, J; Zhang, S; Teizer, J and Bargstädt, H J (2013) A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), pp. 661-674. ISSN 1466433X

Meng, Q; Liu, W; Li, Z; Chong, H Y and Li, K (2026) Mindful leadership and construction workers' safety citizenship behavior: A moderated mediation model of team psychological safety, participative safety self-efficacy, and leader-member exchange. Journal of Construction Engineering and Management, 152(2): 04025244, ISSN 0733-9364

Mitropoulos, P; Abdelhamid, T S and Howell, G A (2005) Systems model of construction accident causation. Journal of Construction Engineering and Management, 131(7), pp. 816-825. ISSN 0733-9364

Mitropoulos, P; Cupido, G and Namboodiri, M (2009) Cognitive approach to construction safety: Task demand-capability model. Journal of Construction Engineering and Management, 135(9), pp. 881-889. ISSN 0733-9364

Moda, H M; Ofodile, N; Zailani, B M; Abubakar, M and Ibrahim, Y M (2023) Management support as a critical success factor (CSF) for changing worker's safety attitude: A case of the Nigerian construction industry. International Journal of Construction Management, 23(15), pp. 2551-2557. ISSN 1562-3599

Newaz, M T; Ershadi, M; Jefferies, M; Pillay, M and Davis, P (2023) A systematic review of contemporary safety management research: A multi-level approach to identifying trending domains in the construction industry. Construction Management and Economics, 41(2), pp. 97-115. ISSN 01446193

Nielsen, K J; Törner, M; Pousette, A and Grill, M (2023) National culture and occupational safety: A comparison of worker-level factors impacting safety for Danish and Swedish construction workers. Construction Management and Economics, 41(6), pp. 445-456. ISSN 01446193

Niskanen, T (1993) Accident risks and preventive measures in materials handling at construction sites. DrTech thesis, Teknillinen Korkeakoulu (Helsinki), Finland.

Niskanen, T and Lauttalammi, J (1989) Accident prevention in materials handling at building construction sites. Construction Management and Economics, 7(3), pp. 263-279. ISSN 01446193

Nnedinma, U (2016) Approaches, drivers and motivators of health and safety self-regulation in the Nigerian construction industry: A scoping study. Architectural Engineering and Design Management, 12(6), pp. 460-475. ISSN 1745-2007

Novieto, D T (2023) Safety climate and occupational safety behaviours: The mediating role of psychological ownership among construction professionals. Engineering, Construction and Architectural Management, 30(2), pp. 853-868. ISSN 0969-9988

Olimat, H.; Abudayyeh, O.; Liu, H. and Alwashah, Z. (2026) Safety performance evaluation model for off-site construction through the integration of key leading and lagging factors. Journal of Construction Engineering and Management, 152(6): 04026077, ISSN 0733-9364

Pandit, B; Albert, A and Patil, Y (2020) Developing construction hazard recognition skill: Leveraging safety climate and social network safety communication patterns. Construction Management and Economics, 38(7), pp. 640-658. ISSN 01446193

Park, M W; Elsafty, N and Zhu, Z (2015) Hardhat-wearing detection for enhancing on-site safety of construction workers. Journal of Construction Engineering and Management, 141(9): 4015024, ISSN 0733-9364

Persad, A (2020) Strategies to retain skilled assistant project managers in construction industries. DBA thesis, Walden University, USA.

Pheng, L S and Pong, C Y (2003) Integrating ISO 9001 and ohsas 18001 for construction. Journal of Construction Engineering and Management, 129(3), pp. 338-347. ISSN 0733-9364

Pinto, A F d N (2012) Development of a fuzzy qualitative risk assessment model applied to construction industry. PhD thesis, Universidade NOVA de Lisboa, Portugal.

Quaigrain, R A; Owusu-Manu, D G; Edwards, D J; Hammond, M; Hammond, M and Martek, I (2024) Occupational health and safety orientation in the oil and gas industry of Ghana: Analysis of knowledge and attitudinal influences on compliance. Journal of Engineering, Design and Technology, 22(3), pp. 795-812. ISSN 1726-0531

Rees, J V (1986) Reforming the workplace: A study of self-regulation in occupational safety. PhD thesis, University of California, Berkeley, USA.

Reiman, A; Møller Pedersen, L; Väyrynen, S; Airaksinen, O; Sormunen, E and Räsänen, T (2020) Multi-organisational approach to safety training: The case of a Finnish safety training park. Construction Management and Economics, 38(7), pp. 659-672. ISSN 01446193

Sacks, R; Rozenfeld, O and Rosenfeld, Y (2009) Spatial and temporal exposure to safety hazards in construction. Journal of Construction Engineering and Management, 135(8), pp. 726-736. ISSN 0733-9364

Sanad, H M; Ammar, M A and Ibrahim, M E (2008) Optimal construction site layout considering safety and environmental aspects. Journal of Construction Engineering and Management, 134(7), pp. 536-544. ISSN 0733-9364

Sherratt, F and Raidén, A B (2023) Taking a new view for researching occupational safety in construction: Site safety practice. Construction Management and Economics, 41(7), pp. 554-575. ISSN 01446193

Sherratt, F; Wong, P and Sherratt, S (2024) What we really know about wearable sensor technologies for construction OSHW. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(4), pp. 253-263. ISSN 17514304

Silva, Renata Moreira de Sa e (2023) Contributions of psychodynamics of work to health and safety management in civil construction works. PhD thesis, Universidade de Brasília, Brazil.

Sobeih, T; Salem, O; Genaidy, A; Abdelhamid, T S and Shell, R (2009) Psychosocial factors and musculoskeletal disorders in the construction industry. Journal of Construction Engineering and Management, 135(4), pp. 267-277. ISSN 0733-9364

Spielholz, P; Davis, G and Griffith, J (2006) Physical risk factors and controls for musculoskeletal disorders in construction trades. Journal of Construction Engineering and Management, 132(10), pp. 1059-1068. ISSN 0733-9364

Szabo, E and Sherratt, F (2024) Consistency in its inconsistency: Safety culture in the us construction industry. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Toole, T M (2002) Construction site safety roles. Journal of Construction Engineering and Management, 128(3), pp. 203-210. ISSN 0733-9364

Tripathi, P and Mittal, Y K (2025) Risk assessment and ranking methodology for occupational hazards in construction: A case of Indian high-rise projects. Smart and Sustainable Built Environment, 14(6), pp. 1927-1949. ISSN 2046-6099

Tymvios, N and Gambatese, J A (2016) Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners. Journal of Construction Engineering and Management, 142(2): 04015078, ISSN 0733-9364

Tymvios, N and Gambatese, J A (2016) Direction for generating interest for design for construction worker safety: a Delphi study. Journal of Construction Engineering and Management, 142(8): 4016024, ISSN 0733-9364

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2018) Proactive safety measures: Quantifying the upright standing stability after sustained rebar tying postures. Journal of Construction Engineering and Management, 144(4): 04018010, ISSN 0733-9364

Wamuziri, S (2011) Evaluation of workplace drug testing in UK civil engineering construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(3), pp. 147-157. ISSN 17514312

Wamuziri, S (2013) Factors that influence safety culture in construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(5), pp. 219-231. ISSN 17514312

Weidman, J E; Dickerson, D E and Koebel, C T (2016) Technology champions: A theory-based intervention to improve adoption of occupational safety innovations. International Journal of Construction Education and Research, 12(3), pp. 193-207. ISSN 1557-8771

Wong, L; Wang, Y; Law, T and Lo, C T (2016) Association of root causes in fatal fall-from-height construction accidents in Hong Kong. Journal of Construction Engineering and Management, 142(7): 4016018, ISSN 0733-9364

Yi, K J and Langford, D (2006) Scheduling-based risk estimation and safety planning for construction projects. Journal of Construction Engineering and Management, 132(6), pp. 626-635. ISSN 0733-9364

Yousef, R A (2015) Toward effective construction safety: Application of morphological analysis to the Arabian Gulf region. PhD thesis, University of Texas at Dallas, USA.

Yılmaz, F (2023) Analysis of the interaction between safety measures and workers' safety awareness from the construction workers' perspective. Engineering, Construction and Architectural Management, 30(1), pp. 41-55. ISSN 0969-9988

Zhang, J; Eastham, D L and Bernold, L E (2005) Waste-based management in residential construction. Journal of Construction Engineering and Management, 131(4), pp. 423-430. ISSN 0733-9364

Zulkeflee, A A; Faisol, N; Ismail, F and Ismail, N A A (2022) Safety compliances enhancement: Foreign labours behaviour in the Malaysian construction site. Journal of Construction in Developing Countries, 27(1), pp. 153-171. ISSN 1823-6499