Items with Index Term: moisture content

Anderson, B R and Ward, T I (1981) Moisture contents of timber battens in houses with dry linings. Construction Papers, 1(2), pp. 65-68. ISSN 0144-8587

Anjaneyappa, V; Amarnath, M S and Srinivasamurthy, B R (2014) Compacting characteristics of light compacting equipment. Journal of Construction Engineering and Management, 140(5): 04014003, ISSN 0733-9364

Austigard, M S and Mattsson, J (2020) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(4), pp. 529-538. ISSN 23984708

Chen, R (2025) Investigation of mechanical and thermal performances and masonry quality for new raw soil-based insulating hollow bricks. Architectural Engineering and Design Management, 21(3), pp. 533-552. ISSN 1745-2007

Chennarapu, H; Garala, T K; Chennareddy, R; Balunaini, U and Venkata Narasimha Reddy, G (2018) Compaction quality control of earth fills using dynamic cone penetrometer. Journal of Construction Engineering and Management, 144(9): 04018086, ISSN 0733-9364

Cho, Y K; Bode, T; Song, J and Jeong, J H (2012) Thermography-driven distress prediction from hot mix asphalt road paving construction. Journal of Construction Engineering and Management, 138(2), pp. 206-214. ISSN 0733-9364

David, D D (2007) Numerical platform to validate resistivity testing for NDE of civil engineering structures. PhD thesis, Wayne State University, USA.

Flood, C and Scott, L (2020) Thermal analysis and post construction verification. International Journal of Building Pathology and Adaptation, 38(1), pp. 51-67. ISSN 23984708

Graham, G (2016) Factors influencing and risk associated with the use of drones by specialty construction companies in the United States of America. PhD thesis, Indiana State University, USA.

Liu, D; Sun, J; Zhong, D and Song, L (2012) Compaction quality control of earth-rock dam construction using real-time field operation data. Journal of Construction Engineering and Management, 138(9), pp. 1085-1094. ISSN 0733-9364

Mazari, M (2014) Studying the parameters involved with modulus-based construction quality control for compaction of unbound pavement layers. PhD thesis, University of Texas at El Paso, USA.

Mellado Mascaraque, M Á; Castilla Pacual, F J; Oteiza, I and Aparicio Secanellas, S (2020) Hygrothermal assessment of a traditional earthen wall in a dry mediterranean climate. Building Research & Information, 48(6), pp. 632-644. ISSN 0961-3218

Nguyen, T T (2017) Modeling of CLT creep behavior and real-time hybrid simulation of a CLT-LiFS building. PhD thesis, University of Alabama, USA.

O'Mahony, M M (1990) Recycling of materials in civil engineering. PhD thesis, University of Oxford, UK.

Ojolo, S J; Damisa, O; Orisaleye, J I and Ogbonnaya, C (2010) Design and development of cashew nut shelling machine. Journal of Engineering, Design and Technology, 8(2), pp. 146-157. ISSN 1726-0531

Onturk, K; Firat, S; Yilmaz, G and Khatib, J (2022) Waste utilization to enhance performance of road subbase fill. Journal of Engineering, Design and Technology, 20(2), pp. 455-474. ISSN 1726-0531

Pryce, M (2006) An exploration of the benefits, drivers and barriers that affect the adoption of green roofs in urban Britain. PhD thesis, University of Salford, UK.

Suchocki, C; Błaszczak-Bąk, W; Janicka, J and Dumalski, A (2021) Detection of defects in building walls using modified optd method for down-sampling of point clouds. Building Research & Information, 49(2), pp. 197-215. ISSN 0961-3218