Items with Index Term: mason

Adeyinka Shittu, T (2012) Development of a framework for sustainable repair of adobe building in an urban area in Nigeria. PhD thesis, University of Plymouth, UK.

Al-Khiami, M. I. and Lindhard, Sø M. (2026) On-site evaluation of back-support exoskeleton effectiveness in construction: A multiple case study of physical performance, ergonomic comfort, and user acceptance among masonry workers. Journal of Construction Engineering and Management, 152(10): 04026167, ISSN 0733-9364

Alves, S and English, J (2018) Female students' preparedness for a male-dominated workplace. Journal of Engineering, Design and Technology, 16(4), pp. 581-595. ISSN 1726-0531

Alwasel, A; Abdel-Rahman, E M; Haas, C T and Lee, S (2017) Experience, productivity, and musculoskeletal injury among masonry workers. Journal of Construction Engineering and Management, 143(6): 05017003, ISSN 0733-9364

Amjad Mohammadi, A; Safaeipour, H; Chenaghlou, M R; Behnejad, A and Afghani Khoraskani, R (2024) Configuration processing and construction of large-span karbandi vaults: A case of the karbandi vaulting of haj-mohammad-qoli timche in tabriz historic bazaar. Engineering, Construction and Architectural Management, 31(1), pp. 432-468. ISSN 0969-9988

Annette, B (2008) A study on gender discrimination among construction workers and the means of empowering women construction workers with special reference to Tiruchirappalli. PhD thesis, Bharathidasan University, India.

Asok, A (2017) Work-life balance of migrant labourers in Kerala with special reference to civil construction sector. PhD thesis, University of Kerala, India.

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Chowdhooree, I and Das, K K (2022) Indigenous knowledge of mud architecture: Experiences of surviving against multiple natural hazards. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 451-469. ISSN 1759-5916

Elkadi, Karim (2024) BIM-enabled facility management framework and simulation. PhD thesis, George Mason University, USA.

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Godfrey, R J (2007) Analysis of construction worker injury information from a workers' compensation database. PhD thesis, University of Florida, USA.

Hadavi, A (1991) Improvement in construction productivity through goal setting in a unionized environment. PhD thesis, Northwestern University, USA.

Halpin, D W (1973) An investigation of the use of simulation networks for modeling construction operations. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Harinarain, N; Caluza, S and Dondolo, S (2021) Bricklaying robots in the South African construction industry: The contractor's perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Harison, J C (1993) Laboring class, dangerous class, insurgent class: The Paris building trades, 1830-1871. PhD thesis, University of Iowa, USA.

Harper, R S and Koehn, E (1998) Managing industrial construction safety in southeast Texas. Journal of Construction Engineering and Management, 124(6), pp. 452-457. ISSN 0733-9364

Hendrickson, C; Martinelli, D and Rehak, D (1987) Hierarchical rule-based activity duration estimation. Journal of Construction Engineering and Management, 113(2), pp. 288-301. ISSN 0733-9364

Hughes, P M (1990) Buildings and the building trade in Worcester 1540-1650. PhD thesis, University of Birmingham, UK.

Jayawardane, A K W and Gunawardena, N B (1998) Construction workers in developing countries: A case study of Sri Lanka. Construction Management and Economics, 16(5), pp. 521-530. ISSN 01446193

Koch, C and Bertelsen, N H (2014) Changing institutions of knowing: Climate mitigation, craft competences and vocational training in Denmark. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Kukoyi, P O and Smallwood, J J (2017) A qualitative study of health and safety construction practices in Lagos. Journal of Construction Business and Management, 1(1), pp. 1-7. ISSN 2521-0165

Li, S (2006) Three essays on bidding in the construction industry. PhD thesis, University of Utah, USA.

McFarland, T C; Ryu, J; Haas, C T and Abdel-Rahman, E M (2024) Crafting safe and efficient masonry practices: Quantitative assessment of postural characteristics in movement strategies. Journal of Construction Engineering and Management, 150(2): 04023159, ISSN 0733-9364

Mitropoulos, P and Memarian, B (2013) Task demands in masonry work: Sources, performance implications, and management strategies. Journal of Construction Engineering and Management, 139(5), pp. 581-590. ISSN 0733-9364

Mobus, M A C (2011) The Burford Masons and the changing world of building practice in England, 1630-1730. PhD thesis, Open University, UK.

Moore, D R (2001) William of Sen to Bob the Builder: Non-cognate cultural perceptions of constructors. Engineering, Construction and Architectural Management, 8(3), pp. 177-184. ISSN 0969-9988

Nanayakkara, L (2004) The motivation of masons in the Sri Lankan construction industry. PhD thesis, University of Reading, UK.

Nanayakkara, L (2005) An empirically grounded framework for human resource management in the Sri Lankan construction industry. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Napolitan, C L (1995) Improvement to the forecast precision of the factor model for masonry productivity. PhD thesis, Pennsylvania State University, USA.

Noor, I (1992) A study of the variability of labour productivity in building trades. PhD thesis, University of Dundee, UK.

O'Byrne, M (2013) Interpreting without a safety harness: The purpose and power of participants in interpreted health and safety training for the construction industry in Ireland. PhD thesis, Dublin City University, Ireland.

Ovararin, N (2001) Quantifying productivity loss due to field disruptions in masonry construction. PhD thesis, University of Texas at Austin, USA.

Pesantes-Tavares, E R (2011) Construction worker health: A web-based approach to selecting alternatives to hazardous procedures. PhD thesis, University of Florida, USA.

Pickhaver, J A (2006) Numerical modelling of building response to tunnelling. PhD thesis, University of Oxford, UK.

Rihani, R A (2006) An investigation of critical success factors for robotic masonry. PhD thesis, North Carolina State University, USA.

Ryu, J; Alwasel, A; Haas, C T and Abdel-Rahman, E M (2020) Analysis of relationships between body load and training, work methods, and work rate: Overcoming the novice mason's risk hump. Journal of Construction Engineering and Management, 146(8): 04020097, ISSN 0733-9364

Ryu, J; Banting, B; Abdel-Rahman, E M and Haas, C T (2023) Ergonomic characteristics of expert masons. Journal of Construction Engineering and Management, 149(1): 04022150, ISSN 0733-9364

Ryu, J; Diraneyya, M M; Haas, C T and Abdel-Rahman, E M (2021) Analysis of the limits of automated rule-based ergonomic assessment in bricklaying. Journal of Construction Engineering and Management, 147(2): 04020163, ISSN 0733-9364

Sanders, S R (1989) An analysis of factors affecting labor productivity in masonry construction. PhD thesis, Pennsylvania State University, USA.

Soliman, E; Al-Tabtabai, H; Almusalam, A and Hussein, M (2023) Impact of COVID-19 on labor's motivational factors and construction productivity. International Journal of Construction Management, 23(15), pp. 2699-2708. ISSN 1562-3599

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Yang, F (2022) Ascending the pagoda: A ground-up exploration of the ancient construction methods of dayanta using virtual reality. PhD thesis, Ohio State University, USA.