Items with Index Term: legislation

Abdul-Aziz, A R and Hussin, A A (2003) Construction safety in Malaysia: A review of industry performance and outlook for the future. Journal of Construction Research, 4(2), pp. 141-153. ISSN 1609-9451

Abela, A; McGrath, P; Hoxley, M and Goodhew, S (2013) A comparative analysis of implementation of the energy performance of buildings directive in the Mediterranean. International Journal of Law in the Built Environment, 5(3), pp. 222-240. ISSN 17561469

Abu Seif, Majed D (2023) Trees on buildings: Investigating opportunities and challenges for implementation. PhD thesis, Griffith University, Australia.

Adaku, E; Ankrah, N A and Ndekugri, I E (2022) Prevention through design: Conceptual models for the assessment of a principal designer's skills, knowledge and experience. Journal of Engineering, Design and Technology, 20(3), pp. 595-623. ISSN 1726-0531

Ade, R and Rehm, M (2021) Summertime comparative evaluation of indoor temperature and comfort in auckland New Zealand: A survey of green certified, code and older homes. Building Research & Information, 49(3), pp. 336-351. ISSN 0961-3218

Adebowale, O J and Agumba, J N (2024) A systematic review of challenges undermining the efficacy of construction health and safety regulations in major African countries. Construction Economics and Building, 24(4-5), pp. 1-24. ISSN 2204-9029

Aderibigbe, A; Umeokafor, N and Umar, T (2023) Constructing for the future: Can the duty of good faith improve payment in the UK construction industry? In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Adjei, S; Ankrah, N; Ndekugri, I and Searle, D (2015) Investigating the extent to which waste management legislation affects waste management practices within the UK construction industry. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Adjei, S D (2016) Review of waste management in the UK construction industry. PhD thesis, University of Wolverhampton, UK.

Adjei, S D; Ankrah, N A; Ndekugri, I and Searle, D (2018) Sustainable construction and demolition waste management: Comparison of corporate and project level drivers. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Afolabi, A; Oyeyipo, O; Ojelabi, R and Patience, T O (2019) Balancing the female identity in the construction industry. Journal of Construction in Developing Countries, 24(2), pp. 83-104. ISSN 1823-6499

Agapiou, A (2020) Drones in construction: An international review of the legal and regulatory landscape. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 174(3), pp. 118-125. ISSN 17514304

Aghimien, D; Aigbavboa, C; Oke, A and Aghimien, L (2022) Latent institutional environment factors influencing construction digitalization in South Africa. International Journal of Construction Education and Research, 18(2), pp. 142-158. ISSN 1557-8771

Agyekum, K; Adinyira, E and Oppon, J A (2022) Factors limiting the adoption of hemp as an alternative sustainable material for green building delivery in Ghana. International Journal of Building Pathology and Adaptation, 40(2), pp. 202-218. ISSN 23984708

Ahmad, A G B (1994) Conservation of British colonial buildings built between 1800 and 1930 in Malaysia. PhD thesis, University of Sheffield, UK.

Ahmad, R K; Gibb, A G F and McCaffer, R (1998) Methodology to develop an effective safety performance measurement technique (spmt). In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Ahmed Ezzat Othman, A and Sirbadhoo, N (2009) An innovative partnership framework for sustainable development of rural areas in South Africa: The role of project management firms. Journal of Engineering, Design and Technology, 7(3), pp. 243-263. ISSN 1726-0531

Ajayi, S; Brinklow-Harris, J; Alaka, H A and Dauda, J A (2019) Managing the benefits and impediments to offsite construction in the UK construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Akotia, J and Awuzie, B (2025) Evaluating social sustainability factor prioritisation in sustainable urban regeneration projects: The case of UK construction industry. Construction Economics and Building, 25(1), pp. 4-24. ISSN 2204-9029

Aksorn, T and Hadikusumo, B H W (2008) Measuring effectiveness of safety programmes in the Thai construction industry. Construction Management and Economics, 26(4), pp. 409-421. ISSN 1466433X

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al Hosni, I S; Amoudi, O and Callaghan, N (2020) An exploratory study on challenges of circular economy in the built environment in Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(3), pp. 104-113. ISSN 17514304

Al Omari, Mohammad K (2025) Application of the AI-enabled unmanned aerial systems in resolving highway construction claims. PhD thesis, University of Illinois at Chicago, USA.

Al-Turfi, S (2017) Best practice project management for the sustainable regeneration of Holy Karbala Province in Iraq. PhD thesis, University of Bolton, UK.

Alamri, R (2019) Development of a model for health and safety management in Saudi Arabian oil and gas construction projects. PhD thesis, University of Wolverhampton, UK.

Alhajeri, M (2011) Health and safety in the construction industry: challenges and solutions in the UAE. PhD thesis, Coventry University, UK.

Alhajeri, M A (2004) Post-construction liabilities for latent defects in building and construction contracts: the theoretical foundations and the allocation of risk, a comparative study in Kuwaiti, French, and English Law. PhD thesis, University of Essex, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Almén, L and Larsson, T J (2014) Health and safety coordinators in building projects. Built Environment Project and Asset Management, 4(3), pp. 251-263. ISSN 2044-124X

Alsharif, M A (2017) Improving sustainability on university campuses in Saudi Arabia: An assessment of organisational and decision-related opportunities and barriers. PhD thesis, University of Reading, UK.

Aminuddin, F A B (2019) The compatibility of dispute resolution mechanisms with national culture in the construction industry: a case study of the Malaysian statutory adjudication regime. PhD thesis, University of Salford, UK.

Ampratwum, G; Tam, V W Y and Osei-Kyei, R (2023) Critical analysis of risks factors in using public-private partnership in building critical infrastructure resilience: A systematic review. Construction Innovation, 23(2), pp. 360-382. ISSN 1471-4175

Anderson, J (2013) Health and safety -the language of UK law. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(1), pp. 6-11. ISSN 17514304

Andersson, R and Buser, M (2022) From waste to resource management? Construction and demolition waste management through the lens of institutional work. Construction Management and Economics, 40(6), pp. 477-496. ISSN 01446193

Antino, P (2021) Interpreting the Party Wall etc Act 1996 and the implications for building below ground. PhD thesis, Anglia Ruskin University, UK.

Appell, H (2020) Workers of Europe unite!? Explaining the form of European labor organization: The construction industry. PhD thesis, Freie Universitaet Berlin, Germany.

Asare, S O; Fobiri, G and Bondinuba, F K (2025) Enhancing fairness, transparency and accountability during tendering under Ghana's procurement system: A systematic review. Built Environment Project and Asset Management, 15(1), pp. 33-50. ISSN 2044-124X

Atkinson, A R (2002) The pathology of building defects; a human error approach. Engineering, Construction and Architectural Management, 9(1), pp. 53-61. ISSN 0969-9988

Awawdeh, S A (2010) The potential of building regulations to improve the energy efficiency of high-rise residential buildings in the Gulf Countries. PhD thesis, Queen's University Belfast, UK.

Ayers, G F; Culvenor, J F; Sillitoe, J and Else, D (2013) Meaningful and effective consultation and the construction industry of Victoria, Australia. Construction Management and Economics, 31(6), pp. 542-567. ISSN 1466433X

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Babangida, I (2014) Hierarchical structuring and evaluation of risks, uncertainties and technical challenges faced by building refurbishment contractors. PhD thesis, University of Bolton, UK.

Babangida, I; Olubodun, F and Kangwa, J (2012) Building refurbishment: Holistic evaluation of barriers and opportunities. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bahrami, S (2021) Product information quality: A sustainability challenge in design and construction. PhD thesis, Lund University, Sweden.

Baker, Scott William (1997) Risk management in major projects. PhD thesis, University of Edinburgh, UK.

Ball, R (1999) Developers, regeneration and sustainability issues in the reuse of vacant industrial buildings. Building Research & Information, 27(3), pp. 140-148. ISSN 0961-3218

Banfill, P F G and Peacock, A D (2007) Energy-efficient new housing: the UK reaches for sustainability. Building Research & Information, 35(4), pp. 426-436. ISSN 0961-3218

Banfill, P F G and Peacock, A D (2007) Energy-efficient new housing - The UK reaches for sustainability. Building Research & Information, 35(4), pp. 426-436. ISSN 1466-4321

Banteli, A; Stevenson, V and Patel, H (2020) Embodied energy considerations in a BIM-enabled building design process: An ethnographic case study. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Barker, H (1989) Use of geotextiles and geocomposites in the united kingdom. Journal of Construction Engineering and Management, 115(2), pp. 258-269. ISSN 0733-9364

Barnes, L R and Croker, N (2013) The relevance of the ISO 26000 social responsibility issues to the Hong Kong construction industry. Construction Economics and Building, 13(3), pp. 37-50. ISSN 2204-9029

Barros D'Sa, A A J (2003) Changes in the liabilities and concerns of the construction professions at the turn of the 21st century. PhD thesis, University of Manchester, UK.

Batarseh, Sana (2025) An approach to adjusting design build for the modern construction industry. PhD thesis, Arizona State University, USA.

Bazen, E (2014) Effect of the Building Act 2011 on compliance costs in Western Australia. Construction Economics and Building, 14(2), pp. 41-56. ISSN 2204-9029

Bechem, E E (2023) A human touch to public-private partnerships for sustainable infrastructure development in the central African sub-region. PhD thesis, University of Manchester, UK.

Behrens, M (2002) Learning from the enemy? Internal union restructuring and the imitation of management strategies. PhD thesis, Cornell University, USA.

Bennett, L (2011) Judges, child trespassers and occupiers' liability. International Journal of Law in the Built Environment, 3(2), pp. 126-145. ISSN 1756-1450

Bennett, W J (2005) Experiences of women in the nontraditional skilled construction trades. PhD thesis, Walden University, USA.

Bergsdal, H; Brattebø, H and Müller, D B (2014) Dynamic material flow analysis for PCBs in the Norwegian building stock. Building Research & Information, 42(3), pp. 359-370. ISSN 0961-3218

Beurskens, Pieter Robert (2021) The development of an evaluation method to support circular building design. PhD thesis, University of Twente, Netherlands.

Bick, P (1997) Statutory reform of aspects of construction law in Australia. Construction Management and Economics, 15(6), pp. 549-558. ISSN 01446193

Boes H, D A (2013) Public procurement at local level in the Netherlands: Towards a better client-contractor cooperation in a competitive environment. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Bong, S; Rameezdeen, R; Zuo, J; Li, R Y M and Ye, G (2015) The designer's role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia. International Journal of Construction Management, 15(4), pp. 276-287. ISSN 1562-3599

Bonham, M B (2013) Leading by example: New professionalism and the government client. Building Research & Information, 41(1), pp. 77-94. ISSN 0961-3218

Bosch-Sijtsema, P and Buser, M (2017) Construction and demolition waste management on the building site: A literature review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Brand, M C and Davenport, P (2011) Proposal for a "dual scheme" model of statutory adjudication for the Australian building and construction industry. International Journal of Law in the Built Environment, 3(3), pp. 252-268. ISSN 1756-1450

Brand, M C and Uher, T (2010) Follow-up empirical study of the performance of the New South Wales construction industry security of payment legislation. International Journal of Law in the Built Environment, 2(1), pp. 7-25. ISSN 1756-1450

Brand, M C and Uher, T E (2004) Adjudication determinations in Australia. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Brandão, R; Hosseini, M R; Macêdo, A N; Melo, A C and Martek, I (2022) Public administration strategies that stimulate reverse logistics within the construction industry: A conceptual typology. Engineering, Construction and Architectural Management, 29(8), pp. 2924-2949. ISSN 0969-9988

Brennan, M C E (2014) Sustainable construction in the 21st century: An educational perspective to shifting the paradigm. PhD thesis, Liverpool John Moores University, UK.

Briscoe, G H; Dainty, A R J and Millett, S J (1999) The likely impact of the tax system on self-employment in the british construction industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Britton, P and Bailey, J (2011) New homes and consumer rights: England and Australia compared. International Journal of Law in the Built Environment, 3(3), pp. 269-295. ISSN 1756-1450

Brooker, P (2009) Criteria for the appropriate use of mediation in construction disputes: Judicial statements in the English technology and construction court. International Journal of Law in the Built Environment, 1(1), pp. 82-97. ISSN 1756-1450

Brown, J D (2012) Corporate responsibility in the UK construction industry: a study of activities and reporting. PhD thesis, University of Nottingham, UK.

Brown, M (1997) Compliance with health and safety legislation: Is deterrence the answer? In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Brown, R (2009) Legal incoherence and the extra-constitutional law of regulatory takings: The Canadian experience. International Journal of Law in the Built Environment, 1(3), pp. 179-193. ISSN 1756-1450

Bröchner, J (2013) Construction patents and university-industry research interaction: An analysis of Nordic region data. Construction Innovation, 13(4), pp. 410-423. ISSN 1471-4175

Bui, T T P; MacGregor, C; Wilkinson, S and Domingo, N (2023) Towards zero carbon buildings: Issues and challenges in the New Zealand construction sector. International Journal of Construction Management, 23(15), pp. 2709-2716. ISSN 1562-3599

Burbridge, A and Troutbeck, R (2017) Zero roadworker harm: Ethical and legal challenges. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(2), pp. 77-84. ISSN 17514304

Burrell, P A (2017) Structural errors and failures in construction: is knowledge hidden? PhD thesis, Anglia Ruskin University, UK.

Burt, J and Purver, K (2014) Building information modelling for small-scale residential projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(3), pp. 134-140. ISSN 17514304

Cameron, I (1999) A goal setting approach to the practice of safety management in the construction industry: Three case studies. PhD thesis, University of Manchester, UK.

Cameron, I; Gillan, G and Duff, A R (2007) Issues in the selection of fall prevention and arrest equipment. Engineering, Construction and Architectural Management, 14(4), pp. 363-374. ISSN 0969-9988

Campbell, J M (2008) Safety hazard and risk identification and management in infrastructure management. PhD thesis, University of Edinburgh, UK.

Carter, Nanette (2014) Do it yourself: The making of the modern home in post-war Australia. PhD thesis, University of Melbourne, Australia.

Cartigny, T and Lord, W (2017) Defining social value in the UK construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(3), pp. 107-114. ISSN 17514304

Carvalho, J P A (2023) Integration of BIM in building sustainability assessment methods. PhD thesis, Universidade do Minho, Portugal.

Casanovas-Rubio, M D M; Armengou, J and Ramos, G (2014) Occupational risk index for assessment of risk in construction work by activity. Journal of Construction Engineering and Management, 140(1): 04013035, ISSN 0733-9364

Cecilia, M M (2016) Requirements for the effective statutory adjudication practice in the South African construction industry. PhD thesis, University of Pretoria, South Africa.

Chan, C F P (2001) The development of construction law in singapore. PhD thesis, University of London, UK.

Chang, Y; Wilkinson, S; Potangaroa, R and Seville, E (2011) Identifying factors affecting resource availability for post-disaster reconstruction: A case study in China. Construction Management and Economics, 29(1), pp. 37-48. ISSN 1466433X

Chang, Y; Wilkinson, S; Seville, E and Potangaroa, R (2010) Resourcing for a resilient post-disaster reconstruction environment. International Journal of Disaster Resilience in the Built Environment, 1(1), pp. 65-83. ISSN 1759-5916

Chang, Y P (2020) Construction worker safety and accident prevention in Taiwan. PhD thesis, University of Bristol, UK.

Cheetham, D W (2000) Improving site safety: Enforcement of the cdm regulations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Chellappa, V and Gunasekaran, A L (2022) Drivers for implementing design for safety in construction: A review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 39-49. ISSN 17514304

Chen, K (2015) A strategic decision making framework for organisational BIM implementation. PhD thesis, Cardiff University, UK.

Cheng, T; Soo, G; Kumaraswamy, M and Jin, W (2010) Security of payment for Hong Kong construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 163(1), pp. 17-28. ISSN 17514312

Cheung, S O; Zhu, L and Yu, K I (2022) The value of apology in construction dispute negotiation. International Journal of Construction Management, 22(10), pp. 1910-1923. ISSN 1562-3599

Christermaller, F; Ibrahim, C K I C; Manu, P; Belayutham, S; Mahamadu, A-M and Yunusa-Kaltungo, A (2022) Implementation of design for safety (dfs) in construction in developing countries: A study of designers in Malaysia. Construction Economics and Building, 22(2), pp. 1-26. ISSN 2204-9029

Christudason, A (2009) Property rights: Achieving a fine balance in collective sales of strata developments in Singapore. International Journal of Law in the Built Environment, 1(1), pp. 26-41. ISSN 1756-1450

Christudason, A and Kenna, P (2010) Can housing rights be applied to modern housing systems? International Journal of Law in the Built Environment, 2(2), pp. 103-117. ISSN 1756-1450

Christudason, A; Kenna, P; Amann, W and Mundt, A (2010) Designing a new rental housing law for Romania. International Journal of Law in the Built Environment, 2(2), pp. 157-177. ISSN 1756-1450

Christudason, A; Kenna, P and Lujanen, M (2010) Legal challenges in ensuring regular maintenance and repairs of owner-occupied apartment blocks. International Journal of Law in the Built Environment, 2(2), pp. 178-197. ISSN 1756-1450

Christudason, A; Kenna, P and Ponce, J (2010) Housing discrimination and minorities in European cities: The Catalan Right to Housing Act 2007. International Journal of Law in the Built Environment, 2(2), pp. 138-156. ISSN 1756-1450

Clark, P I (2011) CDM regulations: safety targeted assessment through gateway evaluation (stage) approach. PhD thesis, University of the West of England, Bristol, UK.

Clarke, G M (1995) The integration of economic and environmental factors in project feasibility planning. PhD thesis, Texas A&M University, USA.

Clifford-Lindkvist, C and Elmualim, A (2008) The socio-technical shaping of innovation in facilities management. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Coenen, T B J; Volker, L and Visscher, K (2021) Introducing circular innovation in the construction industry: The case of the circular viaduct. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Coggins, J; Elliott, R F and Bell, M (2010) Towards harmonisation of construction industry payment legislation: A consideration of the success afforded by the East and West coast models in Australia. Construction Economics and Building, 10(3), pp. 14-35. ISSN 2204-9029

Coggins, J K and Donohoe, S (2012) The validity of adjudicators' determinations containing errors of law: A comparison of the judicial approach in England and New South Wales. International Journal of Law in the Built Environment, 4(2), pp. 116-125. ISSN 1756-1450

Coggins, Jeremy Keith (2012) A proposal for harmonisation of security of payment legislation in the Australian building and construction industry. PhD thesis, University of Adelaide, Australia.

Connelly, J (2001) Developing guidelines for adopting an environmental orientation for construction and related organisations within the supply chain in the construction industry. PhD thesis, Heriot-Watt University, UK.

Correia, Marcia Castilho (2019) Assessment of the quality of architectural projects for public health research laboratories: Sustainability and biosafety. PhD thesis, Universidade Federal do Rio de Janeiro, Brazil.

Costa, Rafael de Oliveira (2021) Applicability of international environmental law in the construction of corporate social responsibility. PhD thesis, Universidade de São Paulo, Brazil.

Cotton, A P; Sohail, M and Scott, R E (2005) Towards improved labour standards for construction of minor works in low income countries. Engineering, Construction and Architectural Management, 12(6), pp. 617-632. ISSN 0969-9988

Cruz Rios, F; Grau, D and Bilec, M (2021) Barriers and enablers to circular building design in the US: An empirical study. Journal of Construction Engineering and Management, 147(10): 04021117, ISSN 0733-9364

Dams, B; Maskell, D; Shea, A; Allen, S; Cascione, V and Walker, P (2023) Upscaling bio-based construction: Challenges and opportunities. Building Research & Information, 51(7), pp. 764-782. ISSN 0961-3218

Dangana, S (2015) A decision support framework for selecting innovative sustainable technologies for delivering low carbon retail buildings. PhD thesis, University of Plymouth, UK.

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2023) Analysis of factors affecting construction and demolition waste reduction in Egypt. International Journal of Construction Management, 23(8), pp. 1395-1404. ISSN 1562-3599

Daoud, A O E (2021) Materials procurement conceptual framework for minimising waste in the Egyptian construction industry. PhD thesis, London South Bank University, UK.

Davenport, P (2010) Harmonisation of chalk and cheese. Construction Economics and Building, 10(3), pp. 36-50. ISSN 2204-9029

Davenport, P and Brand, M C (2013) The effectiveness of time bar clauses following the high court in decision in Andrews v. Australia and New Zealand Banking Group. International Journal of Law in the Built Environment, 5(3), pp. 241-252. ISSN 17561469

Davis, B L (2024) State-legalized marijuana: The effects on construction safety. PhD thesis, Capitol Technology University, USA.

Davis, M R (2018) Achieving diversity on local publicly funded construction projects in the state of California: Knowledge, motivation, and organization factors influencing prime contractor selection of minority subcontractors. EdD thesis, University of Southern California, USA.

Del Ceno, J S (2012) Selective licensing and resident satisfaction in social housing: A UK case study. International Journal of Law in the Built Environment, 4(2), pp. 126-139. ISSN 1756-1450

Desai, A (2012) Formulating an FM strategy for climate change mitigation and adaptation of commercial built assets. PhD thesis, University of Greenwich, UK.

Dithebe, K; Aigbavboa, C O; Thwala, W D and Oke, A E (2019) Analysis on the perceived occurrence of challenges delaying the delivery of water infrastructure assets in South Africa. Journal of Engineering, Design and Technology, 17(3), pp. 554-571. ISSN 1726-0531

Dithebe, K; Aigbavboa, C O; Thwala, W D and Oke, A E (2019) Factor analysis of critical success factors for water infrastructure projects delivered under public-private partnerships. Journal of Financial Management of Property and Construction, 24(3), pp. 338-357. ISSN 1366-4387

Dong, M H (1981) Assessment of Occupational Safety and Health Act of 1970: A case analysis of retrospective work injury data. DPA thesis, University of Southern California, USA.

Dorrah, D H (2024) Development of integrated decision support framework for payment management and negotiation in construction projects. PhD thesis, University of Toronto, Canada.

Douglas, J C (1994) Aesthetic-based conflict in highway planning: Federal highway administration putting planners at risk. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Doume Ekale, M; Pavard, A; Benabderrahmane, K A and Andrew Poirier, E (2026) BIM adoption and implementation in the civil and transportation infrastructure sector: Analysis of governmental roadmaps and action plans. International Journal of Construction Management, 26(6), pp. 925-943. ISSN 1562-3599

Downey, M (2012) Lowering CO2 emissions in the new build social housing sector: A Spanish case study. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Duncan, J (2005) Performance-based building: Lessons from implementation in New Zealand. Building Research & Information, 33(2), pp. 120-127. ISSN 0961-3218

Duncan, K; Philips, P and Prus, M (2006) Prevailing wage legislation and public school construction efficiency: A stochastic frontier approach. Construction Management and Economics, 24(6), pp. 625-634. ISSN 1466433X

Duncan, K; Philips, P and Prus, M (2009) The effects of prevailing wage regulations on construction efficiency in British columbia. International Journal of Construction Education and Research, 5(2), pp. 63-78. ISSN 1557-8771

Duncan, R; Neale, R H and Bagilhole, B M (1999) Equal opportunities and the reconciliation of work and family within the construction process. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Dutra, Clezio Thadeu de Souza (2016) Sustainable public bidding for engineering works and services. PhD thesis, Universidade Federal Fluminense, Brazil.

Edirisinghe, R and Lingard, H (2016) Exploring the potential for the use of video to communicate safety information to construction workers: Case studies of organizational use. Construction Management and Economics, 34(6), pp. 366-376. ISSN 0144-6193

Edirisinghe, R; Lingard, H and Broadhurst, D (2015) Exploring the potential for using video to communicate safety information to construction workers: Case studies of organisational use. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Edwards, D; Parn, E A; Sing, M C P and Thwala, W D (2019) Risk of excavators overturning: Determining horizontal centrifugal force when slewing freely suspended loads. Engineering, Construction and Architectural Management, 26(3), pp. 479-498. ISSN 0969-9988

Edwards, D J (2003) Accident trends involving construction plant: an exploratory analysis. Journal of Construction Research, 4(2), pp. 161-173. ISSN 1609-9451

Edwards, D J and Holt, G D (2005) Exposure to hand-arm vibration: Implications of new statutory requirements. Building Research & Information, 33(3), pp. 257-266. ISSN 0961-3218

Edwards, D J and Holt, G D (2010) Cost-effective risk assessment of hand-arm vibration exposure. Journal of Financial Management of Property and Construction, 15(2), pp. 158-175. ISSN 1366-4387

Elder, John (2007) The history of the master builders association of NSW: The first hundred years. PhD thesis, University of Sydney, Australia.

Elias, A M (1998) Development of a systematic approach for the inclusion of accident risk factors in the calculation of road user costs for construction zones. PhD thesis, University of Florida, USA.

Emhemed, A E (2005) Comprehensive approach to housing legislation: with reference to housing in Libya. PhD thesis, Heriot-Watt University, UK.

Emmitt, S; Gorse, C A and Jones, S R (1999) The housing site manager: Changing roles and training needs. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Emuze, F (2021) Fortifying management control of health, safety and productivity loss in South African construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Emuze, F and Smallwood, J J (2012) Perspectives on health and safety in construction and design. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 27-34. ISSN 17514312

English, J and Bowen, P (2012) Overcoming potential risks to females employed in the South African construction industry. International Journal of Construction Management, 12(1), pp. 37-49. ISSN 1562-3599

English, J and Hay, P (2015) Black South African women in construction: Cues for success. Journal of Engineering, Design and Technology, 13(1), pp. 144-164.

Enshassi, A; Al-Najjar, J and Kumaraswamy, M (2009) Delays and cost overruns in the construction projects in the Gaza Strip. Journal of Financial Management of Property and Construction, 14(2), pp. 126-151. ISSN 1366-4387

Faith-Ell, C (2005) The application of environmental requirements in procurement of road maintenance in Sweden. PhD thesis, KTH Royal Institute of Technology, Sweden.

Faria, Bruna Fernanda de (2012) The influence of the solid waste disposal areas in campinas city, São Paulo state (Brazil) on water quality. PhD thesis, Universidade Estadual de Campinas, Brazil.

Farias, Izaura Pereira (2014) Proposal of a construction waste management model for the eastern zone of the city of Teresina, Piauí. PhD thesis, Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil.

Fernando, N; Jayathilake, P; De Silva, M; Gunathilake, W; Devapura, N and Wise, B (2024) Built environment stakeholders and climate change adaptation: the case of Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 636-648. ISSN 1759-5916

Fjeldstad, O H; Ali, M and Katera, L (2019) Policy implementation under stress: Central-local government relations in property tax administration in Tanzania. Journal of Financial Management of Property and Construction, 24(2), pp. 129-147. ISSN 1366-4387

Fogleman, V (2014) The contaminated land regime: Time for a regime that is fit for purpose (Part 1). International Journal of Law in the Built Environment, 6(1-2), pp. 43-68. ISSN 1756-1450

Fox, J V S (2014) Incentives and limits in letters of intent: Are they worth the paper they're written on? International Journal of Law in the Built Environment, 6(3), pp. 214-232. ISSN 1756-1450

Francart, N (2021) Decision support for the implementation of low-carbon measures in the building sector. PhD thesis, KTH Royal Institute of Technology, Sweden.

Gallardo, C; Sandberg, N H and Brattebø, H (2014) Dynamic-MFA examination of Chilean housing stock: Long-term changes and earthquake damage. Building Research & Information, 42(3), pp. 343-358. ISSN 0961-3218

Gatley, D (2004) A critical examination of building contracts in New Zealand: an investigation into the types of building contracts employed ; their formation and administration ; and into the incidence, nature and resolution of disputes resulting from their usage ; in the commercial and residential sectors of the construction industry in New Zealand. PhD thesis, RMIT University, Australia.

Georgiou, J (2013) Workmanship and defects in housing in the state of Victoria, Australia. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Georgiou, J; Smith, J and Love, P (2003) Building registration: Training and housing quality. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Georgiou, Jim (2016) Legislative control and the quality of housing in Victoria. PhD thesis, University of Melbourne, Australia.

Getvoldsen, K S; Chandragiri, A K; Khalafallah, A M; Belizaire, M; Weirs, J; Raheem, H M J; Gerges, M and Butt, T E (2024) Sustainability’s three principal dimensions versus Climate Change Act 2008: A retrospective numerical modelling. Construction Economics and Building, 24(3), pp. 5-22. ISSN 2204-9029

Gibbons, T (2013) Management agreements in multi-unit housing developments: Existing models and the New Zealand unit titles acts. International Journal of Law in the Built Environment, 5(1), pp. 40-52. ISSN 17561469

Gillespie, D and McIlwaine, S (2021) Reducing embodied carbon in the construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Giorgi, Serena (2020) Circular economy and regeneration of building stock: Policy improvements, strategic partnerships and life cycle decision-making tools. PhD thesis, Politecnico di Milano, Italy.

Glass, A (2011) Analysis of building-integrated renewable energy systems in modern UK homes. EngD thesis, University of Manchester, UK.

Gogo, S E (2021) The role of leadership in the transformation of health and safety culture in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Golden, S K (2008) Immigration and construction: An analysis of the impact of immigration on construction project costs. PhD thesis, University of Maryland, College Park, USA.

Goldstein, G (2021) An examination of cultural diversity discrimination claims in Texas construction companies: A case study. PhD thesis, Purdue University, USA.

Goncalves, Andriani Tavares Tenorio (2019) Integrated solid waste management index for decision support in municipalities. PhD thesis, Universidade Federal de Itajubá, Brazil.

Gormley, M and Campbell, D P (2006) Modelling water reduction effects: Method and implications for horizontal drainage. Building Research & Information, 34(2), pp. 131-144. ISSN 0961-3218

Graham, G (2016) Factors influencing and risk associated with the use of drones by specialty construction companies in the United States of America. PhD thesis, Indiana State University, USA.

Green, E; Lannon, S; Patterson, J; Variale, F and Iorwerth, H (2020) Decarbonising the welsh housing stock: From practice to policy. Buildings & Cities, 1(1), pp. 277-292. ISSN 2632-6655

Griffith, A (1995) The current status of environmental management systems in construction. Engineering, Construction and Architectural Management, 2(1), pp. 3-16. ISSN 0969-9988

Griffith, A (2000) Integrated management systems: A single management system solution for project control? Engineering, Construction and Architectural Management, 7(3), pp. 232-240. ISSN 0969-9988

Griffith, A and Phillips, N (2001) The influence of the construction (design and management) regulations 1994 upon the procurement and management of small building works. Construction Management and Economics, 19(5), pp. 533-540. ISSN 01446193

Gunatilake, S (2013) The uptake and implementation of sustainable construction: transforming policy into practice. PhD thesis, University of Central Lancashire, UK.

Gyi, D E; Gibb, A G F and Haslam, R A (1999) The quality of accident and health data in the construction industry: Interviews with senior managers. Construction Management and Economics, 17(2), pp. 197-204. ISSN 01446193

Haddadin, K H (2003) Cultural and institutional barriers to the take-up of construction management in Jordan. PhD thesis, University of Westminster, UK.

Hagan, S K (2000) Gaining ground: The new contract between architecture and nature. PhD thesis, University of London, Birkbeck College, UK.

Haizelden, J; Marasini, R and Daniel, E (2019) An analysis of diversity management in the construction industry: A case study of a main contractor. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Hallowell, M R and Gambatese, J A (2009) Construction safety risk mitigation. Journal of Construction Engineering and Management, 135(12), pp. 1316-1323. ISSN 0733-9364

Hamida, M. B.; Remøy, H.; Gruis, V. and van Laar, B. (2026) Towards promoting circular building adaptability in adaptive reuse projects: A co-developed framework. Smart and Sustainable Built Environment, 15(3), pp. 1313-1340. ISSN 2046-6099

Hammond, S; Bowen, P and Cattell, K (2016) The roadside work-seeker phenomenon in the South African informal construction sector. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Hassanein, A A G and El Nemr, W (2008) Claims management in the Egyptian industrial construction sector: A contractor's perspective. Engineering, Construction and Architectural Management, 15(3), pp. 246-259. ISSN 0969-9988

Hasselaar, E (2009) Health issues and the building stock. Building Research & Information, 37(5-6), pp. 669-678. ISSN 0961-3218

Haupt, T C (2001) The performance approach to construction worker safety and health. PhD thesis, University of Florida, USA.

Haupt, T C (2003) A study of management attitudes to a performance approach to construction worker safety. Journal of Construction Research, 4(1), pp. 87-100. ISSN 1609-9451

Haupt, T C; Munshi, M and Smallwood, J (2005) HIV and AIDS in South African construction: Is age nothing but a number? Construction Management and Economics, 23(1), pp. 107-119. ISSN 01446193

Hauptfleisch, A C and Verster, J J P (2007) Mentoring: A key intervention in small construction contractor capacity building in South Africa. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Heffernan, E; Pan, W and Liang, X (2012) Delivering zero carbon homes in the UK. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Hoffman, S; Mackie, P K and Pritchard, J (2010) Anti-social behaviour law and policy in the United Kingdom: Assessing the impact of enforcement action in the management of social housing. International Journal of Law in the Built Environment, 2(1), pp. 26-44. ISSN 1756-1450

Home, R (2017) Deregulating planning control over britain's housing stock. International Journal of Law in the Built Environment, 9(3), pp. 193-206. ISSN 1756-1450

Hou, Shan (2014) An investigation into the development of low/zero carbon design training programmes for the purpose of disseminating the knowledge and skills of low/zero carbon design to architects in practice in England and Wales. PhD thesis, Cardiff University, UK.

Hughes, B; Edwards, D J; Martek, I; Chileshe, N and Thwala, W D (2022) Assessing the "clerk of works" role in delivering quality affordable housing: A UK case study. Smart and Sustainable Built Environment, 11(4), pp. 996-1016. ISSN 2046-6099

Hughes, W P and Hughes, C (2013) Professionalism and professional institutions in times of change. Building Research & Information, 41(1), pp. 28-38. ISSN 0961-3218

Hunter, K and Kelly, J (2004) The case for value management in the UK public service sector. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Hussain, A.; Che Ibrahim, C. K. I.; Belayutham, S.; Manu, P. and Cheung, C. (2026) Exploring regulatory capabilities for design for safety in construction: The case of Malaysia. Built Environment Project and Asset Management, 16(2), pp. 221-241. ISSN 2044-124X

Hussain, R S (2017) Investigating the business process implications of managing road works and street works. PhD thesis, Loughborough University, UK.

Hwang, B G; Zhao, X and Lim, J (2020) Job satisfaction of project managers in green construction projects: Influencing factors and improvement strategies. Engineering, Construction and Architectural Management, 27(1), pp. 205-226. ISSN 0969-9988

Ibrahim, C K I C; Manu, P; Belayutham, S; Cheung, C; Mohamad, M Z; Yunusa-Kaltungo, A; Ismail, S and Hussain, A (2023) Factors influencing dfs adoption: The case of Malaysian construction organisations. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ilter, D and Dikbas, A (2009) An analysis of the key challenges to the widespread use of mediation in the Turkish construction industry. International Journal of Law in the Built Environment, 1(2), pp. 143-155. ISSN 1756-1450

Imriyas, K; Low, S P; Teo, A L and Chan, S L (2008) Premium-rating model for workers' compensation insurance in construction. Journal of Construction Engineering and Management, 134(8), pp. 601-617. ISSN 0733-9364

Inyang, N; Al-Hussein, M; El-Rich, M and Al-Jibouri, S (2012) Ergonomic analysis and the need for its integration for planning and assessing construction tasks. Journal of Construction Engineering and Management, 138(12), pp. 1370-1376. ISSN 0733-9364

Isiadianso, C (2007) Integrating deconstruction into the project delivery process. PhD thesis, Loughborough University, UK.

Jackson, F (2006) Biodegradable hydraulic fluids: Reducing oil-related pollution in the construction industry. PhD thesis, Nottingham Trent University, UK.

Jensen Jr, D A and Craig Jr, J W (1998) The impact of TAMRA '88 on US construction accounting practices. Construction Management and Economics, 16(3), pp. 303-313. ISSN 01446193

Jervis, E K (2015) Lowering CO2 emissions: a framework for overcoming institutional pressures and diffusing low carbon strategy throughout the construction supply chain. PhD thesis, University of Liverpool, UK.

Jin, R and Chen, Q (2019) Overview of concrete recycling legislation and practice in the United States. Journal of Construction Engineering and Management, 145(4): 05019004, ISSN 0733-9364

Jin, R; Zou, P X; Li, B; Piroozfar, P and Painting, N (2019) Comparisons of students' perceptions on BIM practice among Australia, China and UK. Engineering, Construction and Architectural Management, 26(9), pp. 1899-1923. ISSN 0969-9988

Johnston, Nicole R (2017) An examination of how conflicts of interest detract from developers upholding governance responsibilities in the transition phase of multi-owned developments: A grounded theory approach. PhD thesis, Griffith University, Australia.

Jones, P; Lannon, S and Patterson, J (2013) Retrofitting existing housing: How far, how much? Building Research & Information, 41(5), pp. 532-550. ISSN 0961-3218

Joutsiniemi, A; Vaattovaara, M and Airaksinen, J (2021) Empowered by planning law: Unintended outcomes in the Helsinki region. Buildings & Cities, 2(1), pp. 837-855. ISSN 2632-6655

Ju, C (2015) A study of institutional complexity and contractors' safety management strategies. PhD thesis, University of Hong Kong, Hong Kong.

Kadir Pakir, A H (2003) Integration: A study in the context of low cost housing projects in Malaysia with special reference to the state of penang. PhD thesis, University College London, UK.

Karami, H and Olatunji, O A (2020) Critical overrun causations in marine projects. Engineering, Construction and Architectural Management, 27(7), pp. 1579-1594. ISSN 0969-9988

Keane, C (2012) Essays in social policy and labour economics. PhD thesis, University College Dublin, Ireland.

Kein, A T T; Ofori, G and Briffett, C (1999) ISO 14000: Its relevance to the construction industry of Singapore and its potential as the next industry milestone. Construction Management and Economics, 17(4), pp. 449-461. ISSN 01446193

Khalil, A (2018) Developing a strategy for the implementation of sustainable construction practices in Libya. PhD thesis, University of Salford, UK.

Khalil, A; Rathnasinghe, A P and Kulatunga, U (2021) Challenges to the implementation of sustainable construction practices in Libya. Construction Economics and Building, 21(3), pp. 243-261. ISSN 2204-9029

Khan, N A; Ullah Khan, S; Ahmed, S; Farooqi, I H; Hussain, A; Vambol, S and Vambol, V (2020) Smart ways of hospital wastewater management, regulatory standards and conventional treatment techniques: A short review. Smart and Sustainable Built Environment, 9(4), pp. 727-736. ISSN 2046-6099

Kim, S (2023) Disaster management and recovery: Estimating the disaster impacts on construction costs and evaluating the policy effects on disaster recovery. PhD thesis, University of Texas at Arlington, USA.

King, D; Gurtner, Y; Firdaus, A; Harwood, S and Cottrell, A (2016) Land use planning for disaster risk reduction and climate change adaptation: Operationalizing policy and legislation at local levels. International Journal of Disaster Resilience in the Built Environment, 7(2), pp. 158-172. ISSN 1759-5916

Kipling, J; Newton, R and Ormerod, M (2011) Accessing emergency rest centres in the UK: Lessons learnt. International Journal of Disaster Resilience in the Built Environment, 2(1), pp. 47-58. ISSN 1759-5916

Krajňák, M. (2026) Property tax trends in the Czech Republic. Journal of Financial Management of Property and Construction, 31(2), pp. 173-199. ISSN 1366-4387

Kua, H W (2006) The design of effective policies for the promotion of sustainable construction materials. PhD thesis, Massachusetts Institute of Technology, USA.

Kuitert, L; Volker, L and Hermans, M H (2020) The public construction client of the future: Network-based collaborator in a traditional public administrative system. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Kuittinen, M (2023) Building within planetary boundaries: Moving construction to stewardship. Buildings & Cities, 4(1), pp. 565-574. ISSN 2632-6655

Kuittinen, M and Häkkinen, T (2020) Reduced carbon footprints of buildings: New Finnish standards and assessments. Buildings & Cities, 1(1), pp. 182-197. ISSN 2632-6655

Laganakou, G (2020) What feasible macro-scale interventions could stimulate a sustainable growth in the UK housing retrofit industry? An examination of the potential impact from supply-chain innovations on low energy retrofit of pre-1919 housing. PhD thesis, University of Northampton, UK.

Lam, H-C R (2003) An investigation into the implementation of safety management systems by Hong Kong construction contractors. PhD thesis, University of Hong Kong, Hong Kong.

Lane, P M M (2012) Can construction arbitration learn from adjudication? Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 35-39. ISSN 17514312

Le Roux, G and Nkado, R N (2001) Legislation governing continuing professional development in the built environment professions in South Africa. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Lees, E (2016) The polluter pays principle and the remediation of the land. International Journal of Law in the Built Environment, 8(1), pp. 2-20. ISSN 1756-1450

Li, K Y K and Chan, A T (2004) Management of radon in tunnel drilling. Journal of Construction Engineering and Management, 130(5), pp. 699-707. ISSN 0733-9364

Liang, S (2013) Legal aspects of privately financed infrastructure projects (PFIPs) in China: the case for international standards. PhD thesis, University of Leeds, UK.

Lingard, H; Cooke, T and Blismas, N (2011) Who is 'the designer' in construction occupational health and safety? In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Lingard, H; Warmerdam, A and Shooshtarian, S (2019) Getting the balance right: Regulating occupational health and safety planning and coordination in the Australian construction industry. Engineering, Construction and Architectural Management, 26(4), pp. 599-617. ISSN 0969-9988

Lobo, Y and Wilkinson, S (2006) The effects of occupational licensing on skills needs in the building industry: Evidence from New Zealand. Construction Economics and Building, 6(2), pp. 55-63. ISSN 2204-9029

Longhurst, Peta (2011) The foundations of madness: The role of the built environment in the mental institutions of New South Wales. PhD thesis, University of Sydney, Australia.

Loosemore, M; Alkilani, S Z and Luperdi, S (2021) Productivity and industrial relations in the Australian construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(4), pp. 167-176. ISSN 17514304

Lowe, J G (1983) Control of direct labour: a critical review. Construction Papers, 2(2), pp. 53-60. ISSN 0144-8587

Ludlow, J E (1976) Assessment and prediction of noise from construction sites. PhD thesis, University of Southampton, UK.

Lynch, H (2014) Passivhaus in the UK: the challenges of an emerging market: a case study of innovation using mixed methods research. PhD thesis, University College London, UK.

Mahat, N; Tah, J H M and Vidalakis, C (2019) Sustainable construction and residential building developers in Malaysia: Factors affecting the adoption. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Malabi Eberhardt, L C; Kuittinen, M; Häkkinen, T; Moinel, C; Nibel, S and Birgisdottir, H (2024) Carbon handprint: A review of potential climate benefits of buildings. Building Research & Information, 52(6), pp. 708-723. ISSN 0961-3218

Malcolm, R (2011) Integrated product policy: Products and their impact on energy. International Journal of Law in the Built Environment, 3(1), pp. 48-64. ISSN 1756-1450

Malmqvist, T (2008) Environmental rating methods: Selecting indoor environmental quality (IEQ) aspects and indicators. Building Research & Information, 36(5), pp. 466-485. ISSN 0961-3218

Mangezi, W (2019) Red tape in upgrading of informal settlements in Nelson Mandela Bay. PhD thesis, Nelson Mandela University, South Africa.

Mangvwat, J S; Spillane, J P and Bradley, J G (2023) Instrumentality of procurement laws to implement social sustainability in Nigeria. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Manu, P; Mahamadu, A M; Booth, C; Olomolaiye, P; Ibrahim, A D and Coker, A (2018) Assessment of procurement capacity challenges inhibiting public infrastructure procurement: A Nigerian inquiry. Built Environment Project and Asset Management, 8(4), pp. 386-402. ISSN 2044-124X

Marx, H (2010) Employers' and agents' perspectives of the condition of the construction industry in South Africa. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Marx, H J (2011) Key performance indicators measuring contractor satisfaction. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Massyn, M and Jeune, K L (2010) Health and safety practices of contractors working on the expanded public works programme (epwp): A South African perspective. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Masurier, J L; Rotimi, J O B and Wilkinson, S (2006) A comparison between routine construction and post-disaster reconstruction with case studies from New Zealand. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Matipa, W M; Kelliher, D and Keane, M (2009) A strategic view of ICT supported cost management for green buildings in the quantity surveying practice. Journal of Financial Management of Property and Construction, 14(1), pp. 79-89. ISSN 1366-4387

Matthews, J and Rowlinson, S (1999) Partnering: Incorporating safety management. Engineering, Construction and Architectural Management, 6(4), pp. 347-357. ISSN 0969-9988

Maund, K; Gajendran, T and Brewer, G (2014) Examining the barriers to successful onsite construction environmental management operations. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

May, D; Wilson, O and Skitmore, M (2001) Bid cutting: An empirical study of practice in South-East Queensland. Engineering, Construction and Architectural Management, 8(4), pp. 250-256. ISSN 0969-9988

McAleenan, P (2016) A novel approach to health and safety in construction: culture, ethics reasoning and leadership. PhD thesis, University of South Wales, UK.

McDonald, B and Smithers, M (1998) Implementing a waste management plan during the construction phase of a project: A case study. Construction Management and Economics, 16(1), pp. 71-78. ISSN 01446193

McDonnell, A and Sinnott, D (2010) Barriers and enablers to energy efficient retrofitting of dwellings in Ireland. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

McKeever, T M (2018) How do the perceptions of wages, benefits, and working conditions differ among unionized mechanical construction workers in right-to-work and non-right-to-work states. PhD thesis, Indiana University of Pennsylvania, USA.

Meintjes, I; Bowen, P and Root, D (2007) HIV/AIDS in the South African construction industry: Understanding the HIV/AIDS discourse for a sector-specific response. Construction Management and Economics, 25(3), pp. 255-266. ISSN 1466433X

Melete, Refiloe (2024) An analysis of the effectiveness of the infrastructure delivery management system in the South African government. PhD thesis, University of the Witwatersrand, Johannesburg, South Africa.

Mewomo, M C (2019) The construction industry stakeholders preliminary views on the proposed South African prompt payment and statutory adjudication regulations. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Moccio, F A (1992) Contradicting male power and privilege: Class, race and gender relations in the building trades. PhD thesis, New School for Social Research, USA.

Mohamed, I F; Edwards, D J; Mateo-Garcia, M; Costin, G and Thwala, W D D (2020) An investigation into the construction industry's view on fire prevention in high-rise buildings post Grenfell. International Journal of Building Pathology and Adaptation, 38(3), pp. 451-471. ISSN 23984708

Mohamed Sultan, A A B (2019) Decision tools for recycling with a focus on fibre reinforced composites. PhD thesis, University of Manchester, UK.

Monteiro, Nathalie Barbosa Reis (2021) Life cycle management: Foundations for the application of circular economy in concrete industries of civil construction. PhD thesis, Universidade Federal do Piauí, Brazil.

Moor, F (2011) Planning for nuisance? A review of the effects of the Planning Act 2008 on the statutory authority defence in the UK. International Journal of Law in the Built Environment, 3(1), pp. 65-82. ISSN 1756-1450

Morgan, J (2009) Housing and security in England and Wales: Casualisation revisited. International Journal of Law in the Built Environment, 1(1), pp. 42-58. ISSN 1756-1450

Mostafa Adel, E; Elnawawy, O; Ayman Ahmed Ezzat, O and Badawy, M (2021) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Mujalli, R O; Marie, I and Al-Kasasbeh, M (2024) Consequences of COVID-19 on jordan's construction sector using data mining techniques. International Journal of Construction Management, 24(12), pp. 1339-1348. ISSN 1562-3599

Mulholland, C (2020) Social value management in megaprojects: A study of UK nuclear decommissioning and remediation. PhD thesis, University of Manchester, UK.

Murphy, M and Eadie, R (2019) Socially responsible procurement: A service innovation for generating employment in construction. Built Environment Project and Asset Management, 9(1), pp. 138-152. ISSN 2044-124X

Murtagh, N; Achkar, L and Roberts, A (2016) “The people that no-one notices”: The power of building control inspectors in sustainable construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Musonda, I and Smallwood, J (2008) Health and safety (H&S) awareness and implementation in botswana's construction industry. Journal of Engineering, Design and Technology, 6(1), pp. 81-90. ISSN 1726-0531

Mustapa, F D (2014) Managing immigrant construction workers in peninsular Malaysia: The economic perspective. PhD thesis, Loughborough University, UK.

Mwanaumo, E M (2013) An integrated approach to multi-stakeholder interventions in construction health and safety. DPhil thesis, University of Johannesburg, South Africa.

Nasarre-Aznar, S (2015) "Robinhoodian" courts' decisions on mortgage law in Spain. International Journal of Law in the Built Environment, 7(2), pp. 127-147. ISSN 1756-1450

Nasereddin, M (2019) Conceptual tactical framework for optimizing whole-life cost of sustainable buildings in Jordan. PhD thesis, Loughborough University, UK.

Ndekugri, I (2013) The consulting engineer and corporate manslaughter risk. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(3), pp. 128-136. ISSN 17514312

Ndekugri, I and Russell, V (2005) Insolvency and resolution of construction contract disputes by adjudication in the UK construction industry. Construction Management and Economics, 23(4), pp. 399-408. ISSN 01446193

Ndekugri, I and Russell, V (2006) Disputing the existence of a dispute as a strategy for avoiding construction adjudication. Engineering, Construction and Architectural Management, 13(4), pp. 380-395. ISSN 0969-9988

Ndekugri, I; Silverio, A K and Mason, J (2024) Enforcing payment obligations under construction contracts by insolvency proceedings. Journal of Financial Management of Property and Construction, 29(3), pp. 372-387. ISSN 1366-4387

Netto, A M (2001) Third party rights for latent defects in buildings. PhD thesis, King's College London, UK.

Ng, P (2011) The use of mediation in preventing homelessness in England. International Journal of Law in the Built Environment, 3(2), pp. 146-158. ISSN 1756-1450

Nghitanwa, E M (2016) Development of practical guidelines to promote occupational health and safety for workers in the construction industry in Windhoek, Namibia. DLittPhil thesis, University of South Africa, South Africa.

Nguyen, Hong Trang (2018) Formulating supportive instruments for green building development in Vietnam. PhD thesis, Queensland University of Technology, Australia.

Nielsen, K J (2017) A comparison of inspection practices within the construction industry between the Danish and Swedish work environment authorities. Construction Management and Economics, 35(3), pp. 154-169. ISSN 01446193

Nyamagere Gladys, S; Rwelamila, P D and Gimbi, J J (2022) A conceptual framework for managing post-disaster reconstruction projects in emerging economies: The case of Angola. Built Environment Project and Asset Management, 12(2), pp. 205-222. ISSN 2044-124X

O'Connor, L A (2003) A socio-technical analysis of the standards based apprenticeship in Ireland: a case study of the construction industry. EdD thesis, University of Leicester, UK.

Oduoza, C F; Alamri, R and Oloke, D (2025) Best practice for safety management: Case of major oil processing country in the middle East. Engineering, Construction and Architectural Management, 32(3), pp. 1857-1874. ISSN 0969-9988

Oduoza, C F; Alamri, R and Oloke, D (2025) Best practice for safety management: A case of major oil processing country in the middle East. Engineering, Construction and Architectural Management, 32(3), pp. 1857-1874. ISSN 0969-9988

Ofek, S (2021) Stimulating key stakeholders to promote residential green building in Israel. PhD thesis, University of Haifa, Israel.

Ofori, G (2015) Nature of the construction industry, its needs and its development: A review of four decades of research. Journal of Construction in Developing Countries, 20(2), pp. 115-135. ISSN 1823-6499

Ojo, L D; Ogunsemi, D R and Ogunsina, O (2022) Conceptual framework of value management adoption in the Nigerian construction industry. Construction Innovation, 22(4), pp. 939-961. ISSN 1471-4175

Okonta, U; Hosseinian-Far, A and Sarwar, D (2025) A systemic approach to sustainable railway infrastructure planning: The case study of milton keynes. Smart and Sustainable Built Environment, 14(2), pp. 407-428. ISSN 2046-6099

Oladejo, J (2020) An investigation in the factors affecting the implementation of health and safety management practices by contractors in Nigeria. PhD thesis, University of the West of England, Bristol, UK.

Oladiran, O J; Bayewun, A A and Aderogba, A M (2021) Awareness and usage of environmental waste management practices of contractors on construction sites. Journal of Construction Business and Management, 5(1), pp. 17-27. ISSN 2521-0165

Olatunde, N A; Awodele, I A; Adebayo, B O and Makanjuola, S S (2025) Assessment of factors inhibiting engagement of quantity surveyors on private residential building projects in Ado-Ekiti, Nigeria. Journal of Financial Management of Property and Construction, 30(2), pp. 318-334. ISSN 1366-4387

Omar, H and Mahdjoubi, L (2023) Practical solutions for improving the suboptimal performance of construction projects using Dubai construction projects as an example. Engineering, Construction and Architectural Management, 30(6), pp. 2185-2205. ISSN 0969-9988

Omollo, W O (2019) Barriers to the effective regulation of the building construction industry: An empirical analysis. Journal of Construction Business and Management, 3(2), pp. 49-58. ISSN 2521-0165

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Osmani, M (2015) Integration of waste minimisation strategies into the design process of buildings. PhD thesis, Loughborough University, UK.

Oswald, D; Sherratt, F; Smith, S D and Hallowell, M R (2018) Exploring safety management challenges for multi-national construction workforces: A UK case study. Construction Management and Economics, 36(5), pp. 291-301. ISSN 01446193

Oswald, D; Smith, S and Sherratt, F (2014) A Spanish subcontractor in a UK culture. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Parikka-Alhola, K and Nissinen, A (2012) Environmental impacts of transport as award criteria in public road construction procurement. International Journal of Construction Management, 12(2), pp. 35-49. ISSN 1562-3599

Park, J and Tucker, R (2017) Overcoming barriers to the reuse of construction waste material in Australia: A review of the literature. International Journal of Construction Management, 17(3), pp. 228-237. ISSN 1562-3599

Pasquire, C (1999) The implications of environmental issues on UK construction management. Engineering, Construction and Architectural Management, 6(3), pp. 276-286. ISSN 0969-9988

Pathirage, C and Al-Khaili, K (2016) Disaster vulnerability of emirati energy sector and barriers to enhance resilience. Built Environment Project and Asset Management, 6(4), pp. 403-414. ISSN 2044-124X

Patton, M (2021) A tendency to cowp things: An exploration of building and conservation in Northern Ireland since 1945 through oral history. PhD thesis, University of Ulster, UK.

Pearson, A D (2014) An investigation of climatically responsive ultra-low energy housing in rural Scotland: a case study. PhD thesis, University of Dundee, UK.

Perez Jimenez, P A (2019) An investigation into health and safety management by SMEs and the risk of corporate manslaughter prosecution. PhD thesis, University of Wolverhampton, UK.

Perry, L J (2006) Industrial disputes in the construction sector. Construction Economics and Building, 6(1), pp. 42-50. ISSN 2204-9029

Persson, U (2009) Management of sustainability in construction works. PhD thesis, Lund University, Sweden.

Phillips, K C (2010) Monumental change: The St. Louis gateway arch and the integration of craft trades. PhD thesis, Howard University, USA.

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities. Unpublished PhD thesis, Universidade Estadual de Campinas, Brazil.

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities: Focus on the city of Campinas – SP. PhD thesis, Universidade Estadual de Campinas, Brazil.

Pooley, A C (2016) Typologies of transformation: learning, environmental responsibility and the UK construction industry. PhD thesis, Cardiff University, UK.

Prideaux, S and Roulstone, A (2009) Good practice for providing disabled people with reasonable access to the built environment: A comparative study of legislative provision. International Journal of Law in the Built Environment, 1(1), pp. 59-81. ISSN 1756-1450

Prolas, L A M (2019) In search of efficiency: an analysis of adjudication under the Ontario Construction Act. JD thesis, Queen's University Belfast, UK.

Qin, X (2010) The impact of political forces on urban land ownership reform in transitional China. International Journal of Law in the Built Environment, 2(3), pp. 206-217. ISSN 1756-1450

Raidén, A B and Aboagye-Nimo, E (2019) Practising occupational health and safety using social practice theory. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Raidén, A B; Dainty, A R J and Neale, R H (2001) Human resource information systems in construction: Are their capabilities fully exploited? In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Raidén, A B and King, A (2023) Added value and numerical measurement of social value: A critical enquiry. Buildings & Cities, 4(1), pp. 767-782. ISSN 2632-6655

Ramachandra, T (2013) Exploring feasible solutions to payment problems in the construction industry in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Ramachandra, T and Rotimi, J O (2011) The nature of payment problems in the New Zealand construction industry. Construction Economics and Building, 11(2), pp. 22-33. ISSN 2204-9029

Rantshilo, K; Mahamadu, A M; Agyekum, K; Cheung, C; Manu, P and Yunusa-Kaltungo, A (2024) Design for safety among design professionals in the Botswanan construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 27-38. ISSN 17514304

Raslan, R M S (2010) Performance based regulations: the viability of the modelling approach as a methodology for building energy compliance demonstration. PhD thesis, University College London, UK.

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Ready to deleteÓ Broin, E (2016) Modelling drivers of energy demand in the European union building sector. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Reaney, M; Griffith, A; Watson, P A and Ellis, C (2000) Optimizing functional relationships for new residential developments. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Roberts, C; Bobrova, Y and Marjanovic-Halburd, L (2019) Impacts of energy legislation on organizational motivation: A case study. Building Research & Information, 47(2), pp. 234-244. ISSN 0961-3218

Roosli, R and O'Keefe, P (2013) Post-disaster housing and management in Malaysia: A literature review. International Journal of Disaster Resilience in the Built Environment, 4(2), pp. 168-181. ISSN 1759-5916

Rotimi, J O B and Wilkinson, S (2014) Improving environmental management legislation to facilitate post-disaster reconstruction. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 23-37. ISSN 1759-5916

Ruddock, L (1994) Performance and efficiency measurement in local authority building organisations. PhD thesis, University of Salford, UK.

Ryan, C.; Spillane, J. P. and Bradley, J. G. (2025) The jurisdiction of adjudicators under the construction contracts act 2013: A case review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 179(1), pp. 7-15. ISSN 1751-4304

Ryan, C; Spillane, J P and Bradley, J G (2023) Legal issues facing adjudication in the Irish construction industry: A discussion. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ryan, C; Spillane, J P and Bradley, J G (2024) Barriers to the adoption of alternative dispute resolution within the Irish construction industry: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Salama, M and Hana, A R (2010) Green buildings and sustainable construction in the United Arab Emirates. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Samasoni, J C (2017) Evaluating the feasibility of implementing a risk-based inspection scheme by building consent authorities in New Zealand. PhD thesis, Auckland University of Technology, New Zealand.

Sanders, C H and Phillipson, M C (2003) UK adaptation strategy and technical measures: The impacts of climate change on buildings. Building Research & Information, 31(3-4), pp. 210-221. ISSN 0961-3218

Sang, K and Powell, A (2012) Gender inequality in the construction industry: Lessons from pierre bourdieu. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Sanhudo, L; Poças Martins, J; Ramos, N M M; Almeida, R M S F; Rocha, A; Pinto, D; Barreira, E and Simões, M L (2021) BIM framework for the specification of information requirements in energy-related projects. Engineering, Construction and Architectural Management, 28(10), pp. 3123-3143. ISSN 0969-9988

Sanhudo, L P N (2021) Artificial intelligence for an enhanced as-is BIM energy analysis: Enabling an efficient energy retrofit through the automation of the scan-to-BIM process. PhD thesis, Universidade do Porto, Portugal.

Scrase, J I (2001) Curbing the growth in UK commercial energy consumption. Building Research & Information, 29(1), pp. 51-61. ISSN 0961-3218

Selman, A D; Heiselberg, H L and Gade, A N (2021) Attitudes towards using wood in the Danish building sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Selman, A D; Heiselberg, H L; Gade, P N and Gade, A N (2022) Exploring designer’s attitudes and challenges in the life cycle assessment of buildings in Denmark. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Selman, A D; Klitgaard, A; Jørsfeldt, L M and Heiselberg, H (2024) Shaping the future: The role of educators in construction programs towards climate legislation in a Danish context. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Sezer, A A (2016) Construction performance measurement: Site managers in refurbishment projects. PhD thesis, Chalmers University of Technology, Sweden.

Sha, K (2004) Construction business system in China: An institutional transformation perspective. Building Research & Information, 32(6), pp. 529-537. ISSN 0961-3218

Shabha, G; Barber, F and Laycock, P (2023) A qualitative assessment of the impact of smart homes and environmentally beneficial technologies on the UK 2050 net-zero carbon emission target. Smart and Sustainable Built Environment, 12(2), pp. 341-360. ISSN 2046-6099

Sherratt, F and Sherratt, S (2017) The road to hell: Worker health, safety and wellbeing within UK corporate social responsibility practices. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Sherry, C (2009) The New South Wales strata and community titles acts: A case study of legislatively created high rise and master planned communities. International Journal of Law in the Built Environment, 1(2), pp. 130-142. ISSN 1756-1450

Shiers, D; Lavers, A and Keeping, M (2007) Indicators of the impact of environmental factors on UK construction law: Developments in the new millennium. Construction Management and Economics, 25(7), pp. 821-829. ISSN 1466433X

Shiers, D; Rapson, D; Roberts, C and Keeping, M (2006) Sustainable construction: The development and evaluation of an environmental profiling system for construction products. Construction Management and Economics, 24(11), pp. 1177-1184. ISSN 1466433X

Shikweni, S (2018) Talent management in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Shooshtarian, S; Lingard, H and Wong, P S P (2020) Using the cost of construction work to trigger legislative duties for WHS: The Australian experience. Built Environment Project and Asset Management, 10(3), pp. 369-387. ISSN 2044-124X

Sidoli del Ceno, J; George, H and Vols, M (2015) Adjudication in tenancy deposit scheme disputes: Agents' perspectives. International Journal of Law in the Built Environment, 7(2), pp. 162-172. ISSN 1756-1450

Sigonda, G G G (2000) The impact of infrastructural projects on the environment in Tanzania: The case of mindu dam. PhD thesis, University of Manchester, UK.

Silva, Alcides Belfort da (2023) Proposal for sustainable civil construction in the city of Ribeirão Preto/SP from the perspective of environmental preservation. PhD thesis, Universidade de Ribeirão Preto, Brazil.

Silva, Renata Moreira de Sa e (2023) Contributions of psychodynamics of work to health and safety management in civil construction works. PhD thesis, Universidade de Brasília, Brazil.

Simukonda, W (2019) Occupational health and safety practices among contractors in Malawi: A generic overview. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 118-124. ISSN 17514304

Sinha, A K and Jha, K N (2021) Financing constraints of public-private partnership projects in India. Engineering, Construction and Architectural Management, 28(1), pp. 246-269. ISSN 0969-9988

Siriwardena, N (2012) Managing stakeholder needs and expectations in a post-disaster housing reconstruction scenario. PhD thesis, University of Salford, UK.

Skaik, S; Coggins, J and Mills, A (2015) Investigating the factors influencing the quality of adjudication of complex payment disputes in Australia. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Skaik, Samer Hisham (2017) Introducing review mechanisms into statutory construction adjudication. PhD thesis, Deakin University, Australia.

Smallwood, J J (2002) Best practice workers' compensation insurance performance: The related issues. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Smith, G and Ceranic, B (2008) Spatial layout planning in sub-surface rail station design for effective fire evacuation. Architectural Engineering and Design Management, 4(2), pp. 99-120. ISSN 1745-2007

Sourani, A (2008) Realising sustainable construction through procurement stratergies. PhD thesis, Loughborough University, UK.

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Spence, R (2004) Risk and regulation: Can improved government action reduce the impacts of natural disasters? Building Research & Information, 32(5), pp. 391-402. ISSN 0961-3218

Ssimbwa, Edward (2023) Streamlining the management of building construction regulatory framework in Sub-Sahara africa's public service - a case for Uganda. DM thesis, Colorado Technical University, USA.

Stevenson, F (2019) Embedding building performance evaluation in UK architectural practice and beyond. Building Research & Information, 47(3), pp. 305-317. ISSN 0961-3218

Sufianto, Heru (2013) A fire safety improvement framework for residential buildings: A socio-ecological behaviour modification approach. PhD thesis, University of New South Wales, Australia.

Sugar, K; Mose, T M; Nolden, C; Davis, M; Eyre, N; Sanchez-Graells, A and van der Horst, D (2022) Local decarbonisation opportunities and barriers: UK public procurement legislation. Buildings & Cities, 3(1), pp. 895-911. ISSN 2632-6655

Sunikka, M (2006) Energy efficiency and low-carbon technologies in urban renewal. Building Research & Information, 34(6), pp. 521-533. ISSN 0961-3218

Suprun, E V and Stewart, R A (2015) Construction innovation diffusion in the Russian federation: Barriers, drivers and coping strategies. Construction Innovation, 15(3), pp. 278-312. ISSN 1471-4175

Suresh, S; Renukappa, S; Alghanmi, I; Mushatat, S and Olayinka, R (2017) Examining the satisfaction level of construction workers regarding safety management in the kingdom of Saudi Arabia. Journal of Construction in Developing Countries, 22(1), pp. 97-113. ISSN 1823-6499

Ta'i, Behnam (1994) Critical evaluation of stormwater management practices on urban construction sites in the Sydney region. PhD thesis, University of New South Wales, Australia.

Taiwo, D O (2022) Incremental development of a legal framework for arbitration in emerging markets: A case study of construction arbitration in Nigeria. PhD thesis, University of Essex, UK.

Tam, V W Y; Le, K N; Tran, C N N and Illankoon, I M C S (2021) A review on international ecological legislation on energy consumption: Greenhouse gas emission management. International Journal of Construction Management, 21(6), pp. 631-647. ISSN 1562-3599

Tangrungruengyoo, K (2018) The impact of environmental impact assessment on new housing development: a case study of Bangkok, Thailand. PhD thesis, King's College London, UK.

Tennakoon, G A; Rameezdeen, R and Chileshe, N (2024) Walking the talk towards sustainable consumption: Interventions to promote the uptake of reprocessed construction materials. Engineering, Construction and Architectural Management, 31(7), pp. 2878-2899. ISSN 0969-9988

Thennakoon, P. N.; Jayasena, S.; Rathnasinghe, A. P. and Ekanayake, A. (2025) Regulatory framework for unsolicited PPPs in infrastructure developments: Barriers and strategies. Construction Innovation, 26(5), pp. 1443-1468. ISSN 1471-4175

Thomas, C S (1994) Aspects of building contracts: A comparative view of english and french law in the light of potential harmonisation. PhD thesis, King's College London, UK.

Thomas, Douglas N (2015) The increase of timber use in residential construction in Australia: Towards a sustainable residential development model. PhD thesis, University of Technology Sydney, Australia.

Thorpe-Jones, E; Dainty, A and Fellows, R (2010) Enacting diversity and equality as part of CSR policy: An agenda for change. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Tokazhanov, G; Tokbolat, S; Tleuken, A and Karaca, F (2024) The pandemic readiness assessment of building design and engineering service-related legislation in Kazakhstan and the EU. Engineering, Construction and Architectural Management, 31(4), pp. 1585-1607. ISSN 0969-9988

Tran, C N N; Pham, P T; Tran, T T M; Tam, V W Y and Illankoon, I M C S (2025) A practical approach to promoting sustainable development in the construction industry through the use of the LOTUS-Vietnamese green-building assessment tool. International Journal of Construction Management, 25(11), pp. 1288-1299. ISSN 1562-3599

Trethanya, S and Perera, R (2009) Environmental assessment for small- and medium-scale road projects implemented in local authority areas: A case study from Thailand. Journal of Construction in Developing Countries, 14(2), pp. 55-76. ISSN 1823-6499

Trethewy, R W; Atkinson, M and Falls, B (2003) Improved hazard identification for contractors in the construction industry. Journal of Construction Research, 4(1), pp. 71-85. ISSN 1609-9451

Trinder, L; Browne, J and Brocklebank, K (2018) A client's perspective of design for manufacture and assembly in the UK water industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 171(4), pp. 141-151. ISSN 17514304

Trompf, Peggy (2012) Another brick in the wall: Responses of the state to workplace fatalities in the New South Wales construction industry. PhD thesis, University of Sydney, Australia.

Tymvios, N and Gambatese, J A (2016) Direction for generating interest for design for construction worker safety: a Delphi study. Journal of Construction Engineering and Management, 142(8): 4016024, ISSN 0733-9364

Tymvios, N and Gambatese, J A (2016) Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners. Journal of Construction Engineering and Management, 142(2): 04015078, ISSN 0733-9364

Udawatta, N; Zuo, J; Chiveralls, K and Zillante, G (2015) Attitudinal and behavioural approaches to improving waste management on construction projects in Australia: Benefits and limitations. International Journal of Construction Management, 15(2), pp. 137-147. ISSN 1562-3599

Umar, T; Umeokafor, N; Zia, A; Egbu, C; Ahmed, S and Saidani, M (2025) How engineering and technology sectors are derailed by legislations: a case study of Pakistan. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(2), pp. 112-123. ISSN 17514304

Umeokafor, N (2017) An appraisal of the barriers to client involvement in health and safety in Nigeria's construction industry. Journal of Engineering, Design and Technology, 15(4), pp. 471-487.

Umeokafor, N; Evangelinos, K and Windapo, A (2022) Strategies for improving complex construction health and safety regulatory environments. International Journal of Construction Management, 22(7), pp. 1333-1344. ISSN 1562-3599

Umeokafor, N; Okoro, C; Diugwu, I and Umar, T (2023) Design for safety in construction in Nigeria: A qualitative inquiry of the critical opportunities. International Journal of Building Pathology and Adaptation, 41(2), pp. 476-494. ISSN 23984708

Umeokafor, N; Windapo, A O; Manu, P; Diugwu, I and Haroglu, H (2023) Critical barriers to prevention through design in construction in developing countries: A qualitative inquiry. Engineering, Construction and Architectural Management, 30(7), pp. 3014-3042. ISSN 0969-9988

Urushima, A. Y. F. and Yamaguchi, K. (2026) Post-war reconstruction-as-knowledge practice: Fukui's dual disaster recovery. Buildings & Cities, 7(1), pp. 667-682. ISSN 2632-6655

V Nithyapriyadharshini (2017) A study on the workplace issues faced by women labours in the construction industry in Chennai city. PhD thesis, Mother Teresa Womens University, India.

Vols, M; Tassenaar, P G and Jacobs, J P A M (2015) Anti-social behaviour and European protection against eviction. International Journal of Law in the Built Environment, 7(2), pp. 148-161. ISSN 1756-1450

Waddell, H (2008) Sustainable construction and UK legislation and policy. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(3), pp. 127-132. ISSN 17514312

Walter, T and Mathew, P (2021) GHG policy impacts for seattle's buildings: Targets, timing, and scope. Buildings & Cities, 2(1), pp. 283-301. ISSN 2632-6655

Wamuziri, S (2008) Improving safety performance in construction through cultural change. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Wamuziri, S (2023) Legislative framework for public-private partnerships in the Sultanate of Oman. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(3), pp. 150-156. ISSN 17514304

Wang, Z; Xie, W and Liu, J (2022) Regional differences and driving factors of construction and demolition waste generation in China. Engineering, Construction and Architectural Management, 29(6), pp. 2300-2327. ISSN 0969-9988

Wanninayake, S B; Nianthi, R and Dayarathne Banda, O G (2024) Roles and responsibilities of stakeholders involved in local-level flood risk management: A study in the Deduru Oya basin in Sri Lanka. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 680-698. ISSN 1759-5916

Warille, J B (2016) Sustainable compensation methods for construction companies operating in turbulent environments: A case of South Sudan. PhD thesis, University of Liverpool, UK.

Warsame, A; Song, H S and Lind, H (2014) Quality of road construction projects in sweden between 1990 and 2010. Construction Economics and Building, 14(1), pp. 78-87. ISSN 2204-9029

Whittaker, J (1987) Equipment rates from revenue requirements. Journal of Construction Engineering and Management, 113(2), pp. 173-178. ISSN 0733-9364

Williams, P J and Williams, A M (2016) Sustainability and planning law in Australia: Achievements and challenges. International Journal of Law in the Built Environment, 8(3), pp. 226-242. ISSN 1756-1450

Wilson, B; An, M and Evdorides, H (2006) The effects of building and planning regulations on construction and demolition waste management. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Windapo, A O and Goulding, J S (2015) Understanding the gap between green building practice and legislation requirements in South Africa. Smart and Sustainable Built Environment, 4(1), pp. 67-96. ISSN 2046-6099

Wong, Y F (2002) The occupational health and safety in Taiwan, 1987-1999. PhD thesis, University of Wales College of Cardiff, UK.

Wood H L, P P F E R P (2013) Understanding complexity in the AEC industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Woods, U (2016) Adverse possession and boundary disputes: Lessons for Ireland from abroad. International Journal of Law in the Built Environment, 8(1), pp. 56-79. ISSN 1756-1450

Wu, J; Kumaraswamy, M and Soo, G K L (2011) Dubious benefits from future exchange: An explanation of payment arrears from 'continuing clients' in mainland China. Construction Management and Economics, 29(1), pp. 15-23. ISSN 1466433X

Wu, J; Kumaraswamy, M M and Soo, G (2011) Regulative measures addressing payment problems in the construction industry: A calculative understanding of their potential outcomes based on gametric models. Journal of Construction Engineering and Management, 137(8), pp. 566-573. ISSN 0733-9364

Xu, D; Agyekum, K; Manu, P; Cheung, C; Che Ibrahim, C K I; Mahamadu, A M and Perez, P A (2026) Design for safety (dfs) implementation in the construction industry: A study of design professionals in Northern China. Journal of Engineering, Design and Technology, 24(1), pp. 1-23. ISSN 1726-0531

Yatim, Y M (2009) Fire safety models for high-rise residential buildings in Malaysia. PhD thesis, Heriot-Watt University, UK.

Yau, Y (2012) Eco-labels and willingness-to-pay: A Hong Kong study. Smart and Sustainable Built Environment, 1(3), pp. 277-290. ISSN 2046-6099

Yimprayoon, C (2012) Energy efficiency design strategies for buildings with grid-connected photovoltaic systems. PhD thesis, University of Michigan, USA.

Yin, Chin Nyuk (1981) The doctrine of fundamental breach in contract law. PhD thesis, Australian National University, Australia.

Yorucu, V and Keles, R (2007) The construction boom and environmental protection in Northern Cyprus as a consequence of the annan plan. Construction Management and Economics, 25(1), pp. 77-86. ISSN 1466433X

Yu, H; Oloke, D; Proverbs, D and Buckley, K (2005) Improving health and safty in construction: A knowledge-based approach. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Yung, P and Rafferty, K (2015) Statutory adjudication in Western Australia: Adjudicators' views. Engineering, Construction and Architectural Management, 22(1), pp. 54-72. ISSN 0969-9988

Zahari, N F; Che-Ani, A I; Abdul Rashid, R B; Mohd Tahir, M A and Amat, S (2020) Factors contribute in development of the assessment framework for wheelchair accessibility in national heritage buildings in Malaysia. International Journal of Building Pathology and Adaptation, 38(2), pp. 311-328. ISSN 23984708

Zamalik, M N and Nawi, M N M (2024) Managing soil and geotechnical aspects in housing developments: Analysis of case studies. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Zhang, Y; Oo, B L and Lim, B T H (2023) Factors affecting contractors' bid or no-bid and mark-up decisions: A case of the jilin province, China. Construction Innovation, 23(5), pp. 1232-1254. ISSN 1471-4175

Zou, P X W and Zhang, G (2009) Comparative study on the perception of construction safety risks in China and Australia. Journal of Construction Engineering and Management, 135(7), pp. 620-627. ISSN 0733-9364

de Gier, A; Gottlieb, S C and Frederiksen, N (2025) Construction clients as drivers of change? How communities filter institutional pressures for sustainability. Construction Management and Economics, 43(8), pp. 599-616. ISSN 0144-6193

van Rij, E and Altes, W K K (2014) Integrated air quality and land use planning in The Netherlands. International Journal of Law in the Built Environment, 6(1-2), pp. 194-210. ISSN 1756-1450

von Malmborg, F; Rohdin, P and Wihlborg, E (2024) Climate declarations for buildings as a new policy instrument in Sweden: a multiple streams perspective. Building Research & Information, 52(4), pp. 479-496. ISSN 0961-3218

Çepni, M. S.; Kutluca, A. K.; Salihoğlu, T.; Atmaca, A. and Mintemur, S. (2026) Changing land-use metrics in mass housing: Türkiye case study. Buildings & Cities, 7(1), pp. 541-558. ISSN 2632-6655