Items with Index Term: landfill

Abraham, D M and Joanne Yeh, M H (1999) Breakwater construction: An effective method for industrial waste utilization. Engineering, Construction and Architectural Management, 6(2), pp. 145-154. ISSN 0969-9988

Ajayi, S O (2017) Design, procurement and construction strategies for minimizing waste in construction projects. PhD thesis, University of the West of England, Bristol, UK.

Akinade, O O (2017) BIM-based software for construction waste analytics using artificial intelligence hybrid models. PhD thesis, University of the West of England, Bristol, UK.

Al-Hajj, A and Hamani, K (2011) Material waste in the UAE construction industry: Main causes and minimization practices. Architectural Engineering and Design Management, 7(4), pp. 221-235. ISSN 1745-2007

Alhawamdeh, M (2020) An interpretivist approach for the development of a behavioural framework to support the adoption of waste minimisation behaviour of contractors: the case study of Jordan. PhD thesis, University of Salford, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Alsheikh-Salem, Y M-B (2022) The development of a sustainability risk assessment model for construction projects: A case study on the Jordanian construction industry. PhD thesis, University of Salford, UK.

Alshibani, A (2008) Optimizing and controlling earthmoving operations using spatial technologies. PhD thesis, Concordia University, Canada.

Arroyo, P (2014) Exploring decision-making methods for sustainable design in commercial buildings. PhD thesis, University of California, Berkeley, USA.

Awale, R and Rowlinson, S (2015) An exploratory study of a CSV concept for achieving firm competitiveness in Hong Kong construction firms. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Awale, Raman (2016) An exploratory study of a 'creating shared value' (CSV) concept for achieving firm competitiveness in Hong Kong construction firms. PhD thesis, University of Hong Kong, Hong Kong.

Balasubramanian, S (2017) Green supply chain management: an investigation on the construction sector. PhD thesis, Middlesex University, UK.

Basri, H (1994) An expert system for preliminary landfill design in developing countries. PhD thesis, University of Leeds, UK.

Boser, R A and El-Gafy, M (2011) Accelerating waste minimization in residential construction: A source separation case study. International Journal of Construction Education and Research, 7(1), pp. 58-70. ISSN 1557-8771

Brandão, R; Hosseini, M R; Macêdo, A N; Melo, A C and Martek, I (2022) Public administration strategies that stimulate reverse logistics within the construction industry: A conceptual typology. Engineering, Construction and Architectural Management, 29(8), pp. 2924-2949. ISSN 0969-9988

Charef, R (2019) A BIM-based framework to integrate a sustainable end-of-life into the asset lifecycle: towards the circular economy. PhD thesis, Coventry University, UK.

Chen, Z; li, H and Wong, C T C (2003) Webfill before landfill: An e-commerce model for waste exchange in Hong Kong. Construction Innovation, 3(1), pp. 27-43. ISSN 1471-4175

Cho, M; Bugg, R; Sattineni, A and Redden, L (2021) Wood waste minimization practices in residential construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Cordoba, Rodrigo Eduardo (2014) Study of the influence of leachates from civil construction waste landfills on water resource quality. PhD thesis, Universidade de São Paulo, Brazil.

Craighill, A L (2002) Lifecycle assessment and evaluation of construction and demolition waste management. PhD thesis, University of East Anglia, UK.

De Luca, A; Chen, L and Gharehbaghi, K (2021) Sustainable utilization of recycled aggregates: Robust construction and demolition waste reduction strategies. International Journal of Building Pathology and Adaptation, 39(4), pp. 666-682. ISSN 23984708

Doan, D T and Chinda, T (2016) Modeling construction and demolition waste recycling program in Bangkok: Benefit and cost analysis. Journal of Construction Engineering and Management, 142(12): 05016015, ISSN 0733-9364

Easa, S M (1988) Earthwork allocations with linear unit costs. Journal of Construction Engineering and Management, 114(4), pp. 641-655. ISSN 0733-9364

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Esa, Mohd Reza (2018) Moving towards sustainable construction in Malaysia: A holistic model for construction and demolition (c&d) waste management. PhD thesis, University of Queensland, Australia.

Fahmy, T (2015) Sustainability assessment of a municipal utility complex: A system of systems approach. PhD thesis, University of Central Florida, USA.

Faria, Bruna Fernanda de (2012) The influence of the solid waste disposal areas in campinas city, São Paulo state (Brazil) on water quality. PhD thesis, Universidade Estadual de Campinas, Brazil.

Forsythe, P (2011) Drivers of housing demolition decision making and the impact on timber waste management. Construction Economics and Building, 11(1), pp. 1-14. ISSN 2204-9029

Gade, R (2022) Achieving sustainable construction through construction & demolition waste minimisation in residential building projects. PhD thesis, Auckland University of Technology, New Zealand.

Geus, Lucio Marcos de (2016) A support model for defining the location of voluntary delivery points for small construction and demolition waste generators. PhD thesis, Pontifícia Universidade Católica do Paraná, Brazil.

Goncalves, Gustavo Henrique Vital (2022) Scenarios and support system for consortium management of construction waste applied to water resources management unit 12. PhD thesis, Universidade Federal de São Carlos, Brazil.

Guerra, Beatriz Chinelato (2021) BIM-based construction waste management and circular economy for resource recovery. PhD thesis, University of Texas at Austin, USA.

Habisreutinger, P and Gunderson, D E (2006) Real estate reuse opportunities within the regenesis project area: A case study. International Journal of Construction Education and Research, 2(1), pp. 53-63. ISSN 1557-8771

Hao, J L J; Tam, V W Y; Yuan, H P; Wang, J Y and Li, J R (2010) Dynamic modeling of construction and demolition waste management processes: An empirical study in Shenzhen, China. Engineering, Construction and Architectural Management, 17(5), pp. 476-492. ISSN 0969-9988

Hardie, M; Khan, S; O'Donnell, A and Miller, G (2007) The efficacy of waste management plans in Australian commercial construction refurbishment projects. Construction Economics and Building, 7(2), pp. 26-36. ISSN 2204-9029

Haronian, E and Sacks, R (2021) Production control in earthworks: Concepts and metrics. Journal of Construction Engineering and Management, 147(10): 04021127, ISSN 0733-9364

Haroon, M; Khan, R B N and Khitab, A (2025) Performance of concrete containing waste demolished concrete powder as a partial substitute for cement. International Journal of Building Pathology and Adaptation, 43(4), pp. 573-590. ISSN 2398-4708

Henn, R L (2013) Moving targets: Managing interinstitutional relationships in green building design and construction. PhD thesis, University of Michigan, USA.

Hiete, M; Stengel, J; Ludwig, J and Schultmann, F (2011) Matching construction and demolition waste supply to recycling demand: A regional management chain model. Building Research & Information, 39(4), pp. 333-351. ISSN 0961-3218

Hwang, B G and Yeo, Z B (2011) Perception on benefits of construction waste management in the Singapore construction industry. Engineering, Construction and Architectural Management, 18(4), pp. 394-406. ISSN 0969-9988

Jahan, Israt (2024) Life-cycle sustainability analysis of construction and demolition wood waste to achieve circular economy. PhD thesis, RMIT University, Australia.

Jayasinghe, R S; Rameezdeen, R and Chileshe, N (2023) Modelling the cause and effect relationship risks in reverse logistics supply chains for demolition waste. Engineering, Construction and Architectural Management, 30(9), pp. 4018-4044. ISSN 0969-9988

Jeljeli, M N (1994) A risk-based methodology for estimating contractors' liability in superfund cleanup construction. PhD thesis, University of Wisconsin - Madison, USA.

Karunasena, G I (2012) Capacity building for post disaster waste management: Construction and demolition waste. PhD thesis, University of Salford, UK.

Kim, S-K (2001) Toward a framework for an intelligent earthwork system (ies). PhD thesis, University of Wisconsin - Madison, USA.

Koc, K and Okudan, O (2021) Assessment of life cycle risks of deconstruction in urban regeneration projects. Journal of Construction Engineering and Management, 147(10): 04021137, ISSN 0733-9364

Krook, J (2006) Concentrate or dilute contaminants? Strategies for Swedish wood waste. PhD thesis, Linköping University, Sweden.

Kunieda, Y (2017) Development of an impact assessment tool for demolition. PhD thesis, University of Bath, UK.

Levis, James William (2013) A mathematical programming life-cycle assessment model for solid waste management decision making. PhD thesis, North Carolina State University, USA.

Li, Guokai (2024) A research on construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Li, Y (2013) Developing a sustainable construction waste estimation and management system. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Lingard, H; Gilbert, G and Graham, P (2001) Improving solid waste reduction and recycling performance using goal setting and feedback. Construction Management and Economics, 19(8), pp. 809-817. ISSN 01446193

Lingard, H; Graham, P and Smithers, G (1997) Waste management in the Australian construction industry: A human factors approach. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Loewenson, T N (2020) A weird-tender: unearthing an inclusive practice for public procurement in Lusaka through design, fiction and performance. PhD thesis, University College London, UK.

Lombardi Filho, Pedro (2022) Management of small volumes of asbestos-cement materials in Brazil: From use to waste. PhD thesis, Universidade de São Paulo, Brazil.

Lu, M; Lau, S C and Poon, C S (2009) Simulation approach to evaluating cost efficiency of selective demolition practices: Case of Hong Kong's Kai Tak Airport demolition. Journal of Construction Engineering and Management, 135(6), pp. 448-457. ISSN 0733-9364

Marcellus-Zamora, K A (2015) An evaluation of material stocks and flows found during construction and demolition activities in the Philadelphia region of the United States. PhD thesis, Drexel University, USA.

Marinelli, M; Dolan, M; Spillane, J and Konanahalli, A (2014) Material waste in the Northern Ireland construction industry: On-site management causes and methods of prevention. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

McDonald, B and Smithers, M (1998) Implementing a waste management plan during the construction phase of a project: A case study. Construction Management and Economics, 16(1), pp. 71-78. ISSN 01446193

Meglin, R (2022) Economic and environmental assessment of a regional construction and building materials industry in Switzerland: An applied combination of material-flow analysis, life-cycle assessment and input-output analysis. DSc thesis, ETH Zürich, Switzerland.

Mohamed Sultan, A A B (2019) Decision tools for recycling with a focus on fibre reinforced composites. PhD thesis, University of Manchester, UK.

Moselhi, O and Alshibani, A (2009) Optimization of earthmoving operations in heavy civil engineering projects. Journal of Construction Engineering and Management, 135(10), pp. 948-954. ISSN 0733-9364

Munaro, M R and Tavares, S F (2025) Design for adaptability and disassembly: Guidelines for building deconstruction. Construction Innovation, 25(2), pp. 665-687. ISSN 1471-4175

Newaz, M T; Davis, P; Sher, W and Simon, L (2022) Factors affecting construction waste management streams in Australia. International Journal of Construction Management, 22(13), pp. 2625-2633. ISSN 1562-3599

Ng, Ming Shan (2022) Design for digital fabrication (dfdfab): Management for sustainable adoption of emerging technologies and innovations. PhD thesis, ETH Zürich, Switzerland.

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Nunes, M C M (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham, UK.

Olukayode, Olukemi Temitope (2020) Sustainable construction compliance: Recommending a transformational leader for sustainability policies supervision in the United States construction industry. DBA thesis, Northcentral University, USA.

Omar, I and Mncwango, S (2005) Sanitary landfill energy harnessing and applications. Journal of Engineering, Design and Technology, 3(2), pp. 127-139. ISSN 1726-0531

Omer, M M; Rahman, R A; Fauzi, M A and Almutairi, S (2025) Key competencies for identifying construction activities that produce recyclable materials: An exploratory study. International Journal of Building Pathology and Adaptation, 43(4), pp. 855-876. ISSN 2398-4708

Osaily, Y; Copping, A and Lo, S (2018) Critical success factors: The development of a conceptual framework for demolition projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Paz, Diogo Henrique Fernandes da (2019) Development of a system to support integrated management of construction and demolition waste. PhD thesis, Universidade Federal de Pernambuco, Brazil.

Peng, C L; Scorpio, D E and Kibert, C J (1997) Strategies for successful construction and demolition waste recycling operations. Construction Management and Economics, 15(1), pp. 49-58. ISSN 01446193

Poon, C S; Yu, A T W and Jaillon, L (2004) Reducing building waste at construction sites in Hong Kong. Construction Management and Economics, 22(5), pp. 461-470. ISSN 01446193

Poon, C S; Yu, A T W and Ng, L H (2003) Comparison of low-waste building technologies adopted in public and private housing projects in Hong Kong. Engineering, Construction and Architectural Management, 10(2), pp. 88-98. ISSN 0969-9988

Poon, C S; Yu, A T W; Wong, A and Yip, R (2013) Quantifying the impact of construction waste charging scheme on construction waste management in Hong Kong. Journal of Construction Engineering and Management, 139(5), pp. 466-479. ISSN 0733-9364

Poon, C S; Yu, A T W; Wong, S W and Cheung, E (2004) Management of construction waste in public housing projects in Hong Kong. Construction Management and Economics, 22(7), pp. 675-689. ISSN 01446193

Price, T (2010) Site waste management plans, the designer and the CDM principal contractor. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Rayhan, D S A and Bhuiyan, I U (2025) A framework for evaluation of construction and demolition waste management alternatives using MCDA techniques in the context of Dhaka City. International Journal of Construction Management, 25(4), pp. 481-493. ISSN 1562-3599

Raynsford, N (1999) The UK's approach to sustainable development in construction. Building Research & Information, 27(6), pp. 419-423. ISSN 0961-3218

Richardson, E J (1999) A non-contact method of measuring volumes of material on landfill sites. PhD thesis, University of Leeds, UK.

Rosado, Lais Peixoto (2019) Life cycle assessment of construction and demolition waste management in a Brazilian watershed. PhD thesis, Universidade Estadual de Campinas, Brazil.

Rosso, S (2007) Environmental life-cycle of domestic kitchen refurbishment. PhD thesis, University of Brighton, UK.

Saeed, F; Mostafa, K; Rauch, C and Hegazy, T (2023) Environmental impact and cost assessment for reusing waste during end-of-life activities on building projects. Journal of Construction Engineering and Management, 149(10): 04023099, ISSN 0733-9364

Sayed, N; Badawy, A; Attia, T and Ahmed, A (2025) Cost-benefit analysis of recycled materials in road asphalt layer: A case study in Egypt. Built Environment Project and Asset Management, 15(4), pp. 791-807. ISSN 2044-124X

Sayed Zayed, N.; Badawy Abu-Sena, A. B.; Attia, T. M. and Ahmed, A. (2026) Integrating recycled materials in road construction: A cost-effective and sustainable approach. International Journal of Construction Management, 26(7), pp. 1222-1238. ISSN 1562-3599

Senaratne, S; Mirza, O; Lambrousis, G and Fernandez-Soncini, A (2018) Structural applicability of steel fibre-recycled aggregate concrete in construction. Journal of Engineering, Design and Technology, 16(6), pp. 959-972. ISSN 1726-0531

Shealy III, E W (2015) Decision environments to encourage more sustainable infrastructure outcomes. PhD thesis, Clemson University, USA.

Shekhawat, P; Sharma, G and Singh, R M (2020) Durability analysis of eggshell powder–flyash geopolymer composite subjected to wetting–drying cycles. Journal of Engineering, Design and Technology, 18(6), pp. 2043-2060. ISSN 1726-0531

Souza, Fernando da Silva (2021) Reinsertion of construction and demolition waste into the production chain of civil construction in Rio Branco, Acre. PhD thesis, Universidade Federal de Ouro Preto, Brazil.

Stewart, J; Minchin, R E; Jaselskis, E J; Dayal, V and Smith, G (2004) Potential construction applications for thermoset composite scrap material. Journal of Construction Engineering and Management, 130(2), pp. 199-205. ISSN 0733-9364

Stewart, J H (2024) The plastics crisis: Responsible recycling in civil engineering and infrastructure. PhD thesis, Mississippi State University, USA.

Swaffield, L M and Johnson, G A (2005) The financial benefits of implementing ISO 14001 within construction contracting organizations. Architectural Engineering and Design Management, 1(3), pp. 197-210. ISSN 1745-2007

Tam, V W Y; Shen, L Y; Fung, I W H and Wang, J Y (2007) Controlling construction waste by implementing governmental ordinances in Hong Kong. Construction Innovation, 7(2), pp. 149-166. ISSN 1471-4175

Tam, V W Y and Tam, C M (2008) Waste reduction through incentives: A case study. Building Research & Information, 36(1), pp. 37-43. ISSN 0961-3218

Tennakoon, G A; Rameezdeen, R and Chileshe, N (2023) Why not reprocessed: Identifying factors limiting the uptake of reprocessed structural timber. Built Environment Project and Asset Management, 13(3), pp. 471-487. ISSN 2044-124X

Tighnavard Balasbaneh, A.; Sher, W. and Ashour, A. (2026) Combining the circular economy and bio-based materials for alternative waste wood applications for the construction industry. Engineering, Construction and Architectural Management, 33(5), pp. 4257-4277. ISSN 0969-9988

Titirla, M and Aretoulis, G (2019) Neural network models for actual duration of Greek highway projects. Journal of Engineering, Design and Technology, 17(6), pp. 1323-1339. ISSN 1726-0531

Tran, V D (2017) Evaluating the economics of construction and demolition waste minimisation and zero waste in the New Zealand construction industry. PhD thesis, Auckland University of Technology, New Zealand.

Urme, S A; Radia, M A; Alam, R; Chowdhury, M U; Hasan, S; Ahmed, S; Sara, H H; Islam, M S; Jerin, D T; Hema, P S; Rahman, M; Islam, A K M M; Hasan, M T and Quayyum, Z (2021) Dhaka landfill waste practices: Addressing urban pollution and health hazards. Buildings & Cities, 2(1), pp. 700-716. ISSN 2632-6655

Wan, S K M and Kumaraswamy, M M (2009) Industrial management approaches for improving material control in building services works. Engineering, Construction and Architectural Management, 16(3), pp. 208-223. ISSN 0969-9988

Wijewickrama, M K C S; Chileshe, N; Rameezdeen, R and Ochoa, J J (2020) Best practices for diverting demolition waste from landfill: A systematic literature review. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Wimalasena, B A D S (2011) A planning tool for construction waste management. PhD thesis, University of Calgary, Canada.

Yi, Yanqing (2025) New model for integration life cycle assessment and system dynamics to support the process of construction and demolition waste management. PhD thesis, Università degli Studi di Padova, Italy.

Yu, A T W; Mok, K S H and Wong, I (2023) Minimisation and management strategies for refurbishment and renovation waste in Hong Kong. Engineering, Construction and Architectural Management, 30(2), pp. 869-888. ISSN 0969-9988

Yuan, H (2011) A dynamic model for assessing the effectiveness of construction and demolition waste management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Zhang, Z and Lee, J D (2023) Decision-making analysis for Pittsburgh's deconstruction pilot using AHP and GIS. Buildings & Cities, 4(1), pp. 292-314. ISSN 2632-6655

van der Kuyp, D J (2018) Strategies construction managerial leaders use to counteract material cost overruns. PhD thesis, Walden University, USA.