Items with Index Term: investigation

Abadi, M (2005) Issues and challenges in communication within design teams in the construction industry: Investigation the use of virtual teams and information and communication technologies in the UK construction industry. PhD thesis, University of Manchester, UK.

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abakporo, R (2017) Challenges of foreign investments in Nigeria's emerging housing construction industry. DM thesis, Colorado Technical University, USA.

Abankwa, Derek Asante (2021) What drives technology adaptation in construction firms? An investigation of the antecedents, adaptive behaviours, and outcomes. PhD thesis, University of Hong Kong, Hong Kong.

Abbas, G M and Gursel Dino, I (2022) The impact of natural ventilation on airborne biocontaminants: A study on COVID-19 dispersion in an open office. Engineering, Construction and Architectural Management, 29(4), pp. 1609-1641. ISSN 0969-9988

Abbasi, A and Mohamadi, S (2022) The investigation of research trends in supply chain management: An integrated method of meta-methodology and co-word analysis. International Journal of Construction Management, 22(9), pp. 1775-1794. ISSN 1562-3599

Abbasian-Hosseini, S A (2015) Social and engineering aspects of construction site management using simulation and social network analysis. PhD thesis, North Carolina State University, USA.

Abdallah, A M (2021) A study on bridge inspections: Identifying barriers to new practices and providing strategies for change. PhD thesis, Colorado State University, USA.

Abdel-Wahab, M and Vogl, B (2011) Trends of productivity growth in the construction industry across Europe, US and Japan. Construction Management and Economics, 29(6), pp. 635-644. ISSN 1466433X

Abdelhamid, T S and Everett, J G (2000) Identifying root causes of construction accidents. Journal of Construction Engineering and Management, 126(1), pp. 52-60. ISSN 0733-9364

Abdi, A (2014) Efficient winter road maintenance: A study of technical and contractual issues. PhD thesis, KTH Royal Institute of Technology, Sweden.

Abdi, A; Lind, H and Birgisson, B (2013) Payment mechanisms for winter road maintenance services. Construction Economics and Building, 13(4), pp. 18-31. ISSN 2204-9029

Abdul Nabi, M and El-Adaway, I H (2021) Risk-based approach to predict the cost performance of modularization in construction projects. Journal of Construction Engineering and Management, 147(10): 04021133, ISSN 0733-9364

Abdul Nasir, N A B; Hassan, A S; Khozaei, F and Abdul Nasir, M H B (2021) Investigation of spatial configuration management on social distancing of recreational clubhouse for COVID-19 in Penang, Malaysia. International Journal of Building Pathology and Adaptation, 39(5), pp. 782-810. ISSN 23984708

Abdul-Hadi, N H; Al-Sudairi, A and Alqahtani, S (2005) Prioritizing barriers to successful business process re-engineering (BPR) efforts in Saudi Arabian construction industry. Construction Management and Economics, 23(3), pp. 305-315. ISSN 01446193

Abdul-Rahman, H (1996) Some observations on the management of quality among construction professionals in the UK. Construction Management and Economics, 14(6), pp. 485-495. ISSN 01446193

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Abdulla, H S (2016) An investigation on the causes and remedial measures on the delays in the construction industry in the Kingdom of Bahrain. PhD thesis, Glasgow Caledonian University, UK.

Abdullahi, A L (2016) Ethnomimicry: the development of a conceptual model of the Nigerian practice of the end-of-life management of buildings. PhD thesis, University of Huddersfield, UK.

Abdullatif, M I (1992) A system for quality-related costs for construction projects. PhD thesis, University of Kansas, USA.

Abediniangerabi, B; Shahandashti, M and Makhmalbaf, A (2021) Coupled transient heat and moisture transfer investigation of facade panel connections. Journal of Engineering, Design and Technology, 19(3), pp. 758-777. ISSN 1726-0531

Abediniangerabi, B; Shahandashti, S M; Ahmadi, N and Ashuri, B (2017) Empirical investigation of temporal association between architecture billings index and construction spending using time-series methods. Journal of Construction Engineering and Management, 143(10): 04017080, ISSN 0733-9364

Abid, M S (1995) Reconstruction for low-income communities in earthquake zones: an investigation for the implementation of community-managed housing reconstruction programmes in low-income countries located in earthquakes zones. PhD thesis, Loughborough University, UK.

Abideen, D; Yunusa-Kaltungo, A; Manu, P and Cheung, C (2023) Expert verification of information requirements for integrating building information modelling with operation and maintenance. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Abrams, N (2025) Labour ex machina: Race, work, and statecraft in South Africa. PhD thesis, University of Toronto, Canada.

Abubakar, S Y (1998) Investigation of factors affecting rural road maintenance: the case of Sokoto State, Nigeria. PhD thesis, Loughborough University, UK.

Abubaker, A E; Greenwood, D and Osborne, A (2008) A study of project planning on Libyan construction projects. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Abuelma'atti, A (2012) A strategic approach to the implementation of information technologies in small and medium-sized architecture, engineering and construction enterprises. PhD thesis, University of Salford, UK.

Abuimara, T; O’Brien, W; Gunay, B and Carrizo, J S (2019) Towards occupant-centric simulation-aided building design: A case study. Building Research & Information, 47(8), pp. 866-882. ISSN 0961-3218

Aburas, M (2020) Critical success factors for implementing ISO 9001 in UK construction projects. PhD thesis, University of Salford, UK.

Adafin, J; Rotimi, J O B and Wilkinson, S (2015) Why do the design stage elemental cost plan and final tender sum differ in New Zealand? Journal of Financial Management of Property and Construction, 20(2), pp. 116-131. ISSN 1366-4387

Adafin, J; Rotimi, J O B; Wilkinson, S and Mbachu, J (2019) An assessment of risk factors impacting budget variability in New Zealand commercial construction projects. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Adaku, E; Osei-Poku, V; Ottou, J A and Yirenkyi-Fianko, A (2024) Contractor payment delays: A systematic review of current trends and future directions. Construction Innovation, 24(5), pp. 1205-1227. ISSN 1471-4175

Adams, F K (2006) Expert elicitation and Bayesian analysis of construction contract risks: An investigation. Construction Management and Economics, 24(1), pp. 81-96. ISSN 01446193

Addy, M; Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana: An application of a technology acceptance model. Journal of Engineering, Design and Technology, 16(2), pp. 313-326. ISSN 1726-0531

Addy, M N; Addo, E T; Kwofie, T E and Yartey, J E (2023) Predicting the adoption of e-procurement in construction project delivery in Sub-Saharan Africa: An application of utaut2. Construction Innovation, 23(5), pp. 1038-1053. ISSN 1471-4175

Addy, M N; Akunyumu, S and Simons, B (2019) Key risk factors affecting renewable energy independent power producer (IPP) set-up projects in developing countries: The case of Ghana. Journal of Engineering, Design and Technology, 17(6), pp. 1340-1355. ISSN 1726-0531

Adebayo, S O (1991) A study of the maintenance management of public buildings in Nigeria. PhD thesis, University of Lagos, Nigeria.

Adegoke, A.; Akanmu, A. and Terreno, S. (2026) Aligning visual data practices with construction decision making: Delphi-based investigation. Journal of Construction Engineering and Management, 152(8): 04026119, ISSN 0733-9364

Adepu, N; Kermanshachi, S; Pamidimukkala, A and Nwakpuda, E (2025) An analytical approach to understanding construction cost overruns during COVID-19. Smart and Sustainable Built Environment, 14(6), pp. 1780-1794. ISSN 2046-6099

Aderibigbe, A; Umeokafor, N and Umar, T (2023) Constructing for the future: Can the duty of good faith improve payment in the UK construction industry? In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Adesi, M; Murphy, R and Kehily, D (2019) The strategy process of Irish quantity surveying firms operating within a turbulent business environment. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Adesi, M; Owusu-Manu, D G and Boateng, F (2019) Segmentation of quantity surveying professional services for focus strategy and diversification. Journal of Financial Management of Property and Construction, 24(3), pp. 294-308. ISSN 1366-4387

Adeyemi, B S and Aigbavboa, C O (2020) Conflict factors investigation among construction professionals in Nigeria. Journal of Engineering, Design and Technology, 18(5), pp. 1121-1137. ISSN 1726-0531

Adham, T A (1992) Formation of project managers. PhD thesis, Loughborough University, UK.

Adjei, K O (2020) A model for predicting cost control practice in the Ghanaian construction industry. DPhil thesis, University of Johannesburg, South Africa.

Adul-Hamid, R (1996) Construction duration prediction using neural network methodology. PhD thesis, University of Manchester, UK.

Afetornu, C (2011) The influence of estimator attitude on project cost reliability. PhD thesis, Loughborough University, UK.

Afetornu, C; Edum-Fotwe, F T and McCaffer, R (2006) Estimating budget variability for road projects. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Afifi, M; Fotouh, A; Al-Hussein, M and Abourizk, S (2022) Integrated lean concepts and continuous/discrete-event simulation to examine productivity improvement in door assembly-line for residential buildings. International Journal of Construction Management, 22(13), pp. 2423-2434. ISSN 1562-3599

Afxentiadis, D E (2010) Interpreting a major event organization's efforts to reliably manage information security risks: the case of the Athens 2004 Olympics. PhD thesis, London School of Economics and Political Science, UK.

Afzal, Muneeb (2024) Improving request for information (RFI) processing in construction projects using natural language processing (NLP) techniques. PhD thesis, University of Technology Sydney, Australia.

Agapiou, A and Clark, B (2011) Scottish construction lawyers and mediation: An investigation into attitudes and experiences. International Journal of Law in the Built Environment, 3(2), pp. 159-181. ISSN 1756-1450

Agbulos, A; Mohamed, Y; Al-Hussein, M; Abourizk, S and Roesch, J (2006) Application of lean concepts and simulation analysis to improve efficiency of drainage operations maintenance crews. Journal of Construction Engineering and Management, 132(3), pp. 291-299. ISSN 0733-9364

Aghimien, D; Aliu, J; Akinradewo, O; Aghimien, L; Aigbavboa, C and Ditsele-Rapodile, K (2025) PLS-SEM assessment of the impact of job satisfaction on the organisational commitment of women quantity surveyors. International Journal of Construction Management, 25(1), pp. 115-123. ISSN 1562-3599

Agnoletto, S (2013) Building an economic ethic niche: Italian immigrants in the Toronto construction industry (1950s-1970s): a case study. PhD thesis, Kingston University, UK.

Agu, C A (2020) Exploring the standards american executive leaders need to develop successful infrastructure projects in sub-saharan Africa. DM thesis, Colorado Technical University, USA.

Agyekum, K and Amudjie, J (2024) Challenges to implementing circular economy: Empirical evidence among built environment firms in Ghana. International Journal of Construction Management, 24(3), pp. 281-297. ISSN 1562-3599

Agyekum-Mensah, G; Reid, A and Temitope, T A (2020) Methodological pluralism: Investigation into construction engineering and management research methods. Journal of Construction Engineering and Management, 146(3): 04020006, ISSN 0733-9364

Ahiakwo, O A (2015) Improving construction processes in Nigeria using the Last Planner® System. PhD thesis, University of Wolverhampton, UK.

Ahmed, A L (2019) Development of conceptual constructs for organisational BIM adoption and their systematic application within the UK architecture sector. PhD thesis, University of Sheffield, UK.

Ahmed, I and McEvoy, D (2014) Post-tsunami resettlement in Sri Lanka and India: Site planning, infrastructure and services. International Journal of Disaster Resilience in the Built Environment, 5(1), pp. 53-65. ISSN 1759-5916

Ahmed, Mohammed Ali (2020) An exploration of factors influencing quality management system implementation: The case of the Australian construction industry. PhD thesis, Queensland University of Technology, Australia.

Ahmed, S N; Pasquire, C and Manu, E (2022) Key factors affecting commercial actors in collaborative working within the UK construction industry. Journal of Financial Management of Property and Construction, 27(3), pp. 323-347. ISSN 1366-4387

Ahmed, V; Pathmeswaran, R; Baldry, D; Worrall, L and Abouen, S (2008) An investigation into the barriers facing black and minority ethnics within the UK construction industry. Journal of Construction in Developing Countries, 13(2), pp. 83-99. ISSN 1823-6499

Ahn, S; Crouch, L; Wan Kim, T and Rameezdeen, R (2020) Comparison of worker safety risks between onsite and offsite construction methods: A site management perspective. Journal of Construction Engineering and Management, 146(9): 0001890, ISSN 0733-9364

Aigbavboa, C and Thwala, W (2013) The role of beneficiaries' participation in South Africa low-income housing occupants' satisfaction. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ainoo, F N Y (2025) Leveraging big data in AEC decision-making: A governance framework. PhD thesis, Capella University, USA.

Ajayi, S O (2017) Design, procurement and construction strategies for minimizing waste in construction projects. PhD thesis, University of the West of England, Bristol, UK.

Akbar, M R (2012) Evaluating sustainability in high-rise developments. PhD thesis, Ulster University, UK.

Akcamete, A (2011) A formal approach for managing facility change information and capturing change history as part of building information models (BIMs). PhD thesis, Carnegie Mellon University, USA.

Akinsola, A O (1997) An intelligent model of variations' contingency on constructions projects. PhD thesis, University of Wolverhampton, UK.

Akintoye, A; Beck, M; Hardcastle, C; Chinyio, E A and Asenova, D (2000) Management of risks within the PFI project environment. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Akintoye, A; Beck, M; Hardcastle, C; Chinyio, E A and Asenova, D (2001) Risk identification practices under PFI environment. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Akintoye, A; Beck, M; Hardcastle, C; Chinyio, E A and Asenova, D (2003) Outsourcing the Risk Analysis Function in 'Private Finance Initiative' Projects. Journal of Construction Procurement, 9(1), ISSN 1358-9180

Akintoye, A and Chinyio, E (2005) Private finance initiative in the healthcare sector: Trends and risk assessment. Engineering, Construction and Architectural Management, 12(6), pp. 601-616. ISSN 0969-9988

Akintoye, A and Fitzgerald, E (2000) A survey of current cost estimating practices in the UK. Construction Management and Economics, 18(2), pp. 161-172. ISSN 01446193

Akintoye, A; Hardcastle, C; Beck, M; Chinyio, E and Asenova, D (2003) Achieving best value in private finance initiative project procurement. Construction Management and Economics, 21(5), pp. 461-470. ISSN 01446193

Akinwunmi, A; Gameson, R; Hammond, F and Olomolaiye, P (2007) Mortgage insurance and housing finance in emerging economies. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Akomea-Frimpong, I; Dzagli, J R A D; Eluerkeh, K; Bonsu, F B; Opoku-Brafi, S; Gyimah, S; Asuming, N A S; Atibila, D W and Kukah, A S (2025) A systematic review of artificial intelligence in managing climate risks of PPP infrastructure projects. Engineering, Construction and Architectural Management, 32(4), pp. 2430-2454. ISSN 0969-9988

Akomea-Frimpong, I; Jin, X; Osei Kyei, R; Tetteh, P A; Tumpa, R J; Ofori, J N A and Pariafsai, F (2024) A review of circular economy models and success factors on public-private partnership infrastructure development. Built Environment Project and Asset Management, 14(1), pp. 109-126. ISSN 2044-124X

Aksenova, G (2020) The dark side of ecosystem orchestration: an empirical investigation of building information management in the digital built environment sector. PhD thesis, University of Liverpool, UK.

Al Hasani, Mundhir Mahmood Abdullah (2019) An investigation into risk management practices in construction projects: The case of United Arab Emirates. PhD thesis, Bond University, Australia.

Al Hatmi, H (2012) Business relationships: A cross-culture management investigation in the UAE construction industry. PhD thesis, Liverpool John Moores University, UK.

Al Mahmud, J; Arefin, S and Ahmmed, M I (2026) Uncovering the research tapestry: Bibliometric insights into BIM and LCA – exploring trends, collaborations and future directions. Construction Innovation, 26(1), pp. 123-146. ISSN 1471-4175

Al Nahyan, Moza Tahnoon (2012) Management of mega infrastructure projects in the United Arab Emirates. PhD thesis, Monash University, Australia.

Al Saudi, I S A (2011) The impediments to the adoption of the design and build project procurement strategy in the Saudi construction industry. PhD thesis, Heriot-Watt University, UK.

Al-Bayati, A J (2017) Managing workforce diversity in construction to improve communication and reduce fatalities (Hispanic workforce focus). PhD thesis, Western Michigan University, USA.

Al-Bayati, A J; Abudayyeh, O; Fredericks, T and Butt, S E (2017) Reducing fatality rates of the Hispanic workforce in the U.S. Construction industry: Challenges and strategies. Journal of Construction Engineering and Management, 143(3): 04016105, ISSN 0733-9364

Al-Bayati, A J; Al-Kasasbeh, M; Awolusi, I; Abudayyeh, O and Umar, T (2021) Trends of occupational fatal and nonfatal injuries in electrical and mechanical specialty contracting sectors: Necessity for a learning investigation system. Journal of Construction Engineering and Management, 147(7): 04021069, ISSN 0733-9364

Al-Fadhala, M M (2002) Uncertainty-based condition assessment of existing concrete structures. PhD thesis, University of Maryland, College Park, USA.

Al-Ghassani, A M; Carrillo, P M; Anumba, C J and Robinson, H S (2001) Software requirements for knowledge management in construction organizations. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Al-Hammad, A M; Assaf, S and Al-Hazmi, T (1996) Assessment of the types of public building maintenance contracts in Saudi Arabia. Building Research & Information, 24(6), pp. 358-362. ISSN 0961-3218

Al-Hashimy, H. N. H. and Yao, J. (2026) The moderating role of electronic accounting information systems in enhancing efficiency in construction project management. Engineering, Construction and Architectural Management, 33(4), pp. 3308-3331. ISSN 0969-9988

Al-Hazmi, T A (1999) Project procurement system selection model (with particular reference to Saudi Arabia). PhD thesis, Loughborough University, UK.

Al-Hinai, A (2024) A hermeneutical approach to social value: A case study of national infrastructure planning in Oman. PhD thesis, University of Manchester, UK.

Al-Kaisy, A and Nassar, K (2005) Nighttime construction issues revisited. Journal of Construction Research, 6(1), pp. 139-156. ISSN 1609-9451

Al-Khiami, M I; Lindhard, S M and Wandahl, S (2025) Paradox in practice: Work-related musculoskeletal disorder prevalence and reporting among construction workers in Kuwait and Denmark. Journal of Construction Engineering and Management, 151(7): 04025078, ISSN 0733-9364

Al-Meshekeh, H S and Langford, D A (1999) Conflict management and construction project effectiveness: a review of the literature and development of a theoretical framework. Journal of Construction Procurement, 5(1), pp. 58-75. ISSN 1358-9180

Al-Mhdawi, M K S; O'Connor, A; Qazi, A; Rahimian, F and Dacre, N (2025) Review of studies on risk factors in critical infrastructure projects from 2011 to 2023. Smart and Sustainable Built Environment, 14(2), pp. 342-376. ISSN 2046-6099

Al-Mutairi, Y (2015) Development of implementation strategies for offsite construction techniques in the Kingdom of Saudi Arabia. PhD thesis, University of Salford, UK.

Al-Muyeed, A and Afrin, R (2005) Effect of masonry infill for reducing the sway of RC frame using finite element modeling. Journal of Construction Research, 6(2), pp. 293-306. ISSN 1609-9451

Al-Nijaidi, H R (1985) Flexibility in the design of buildings. PhD thesis, Oxford Brookes University, UK.

Al-Otaibi, S (2021) Assessing the impact of transport investment and railway accessibility on economic productivity. PhD thesis, Loughborough University, UK.

Al-Qawasmi, J (2016) Vernacular as a renewable resource: Toward region-specific architecture in Saudi Arabia, a case from KFUPM. Architectural Engineering and Design Management, 12(2), pp. 81-96. ISSN 1745-2007

Al-Saqer, K M (2001) An investigation into the development processes and project management practices of government construction projects in Saudi Arabia. PhD thesis, University of Birmingham, UK.

Al-Shammery, H A-H (2017) Improving the school building delivery process in post conflict Iraq. PhD thesis, University of Salford, UK.

Al-Tubayyeb, S A (1989) Improving construction contract administration utilizing multiattribute statistical analysis on bid stage information. PhD thesis, University of California, Berkeley, USA.

Al-Wareh, M (1979) Investigation of the design procedures for buildings of quality in modern architecture, with notes on the relevant contemporary situation in Syria. PhD thesis, University of Sheffield, UK.

Al-Werikat, G K E (2017) The impact of supply chain management on construction projects performance in Jordan. PhD thesis, Coventry University, UK.

AlHarmoodi, S M and Dulaimi, M (2022) The alignment of the open innovation process and the project lifecycle. Built Environment Project and Asset Management, 12(4), pp. 556-572. ISSN 2044-124X

AlMemari, M; Khalid, K and Osman, A (2025) Job crafting-job embeddedness linkage of construction professionals: Moderating effect of career stages. Journal of Engineering, Design and Technology, 23(1), pp. 108-125. ISSN 1726-0531

AlSehaimi, A (2011) Improving construction planning practice in Saudi Arabia by means of lean construction principles and techniques. PhD thesis, University of Salford, UK.

Alahmadi, N H (2018) Nudging contracting firms rivals within municipal road projects in Saudi Arabia to bid competitively. PhD thesis, University of Strathclyde, UK.

Alam, A; Bhat, M S; Farooq, H; Ahmad, B; Ahmad, S and Sheikh, A H (2018) Flood risk assessment of srinagar city in Jammu and Kashmir, India. International Journal of Disaster Resilience in the Built Environment, 9(2), pp. 114-129. ISSN 1759-5916

Alam, M (2009) Investigating the effectiveness of continuing professional development in project management. PhD thesis, University of Manchester, UK.

Alazzam, M. and Celoza, A. (2026) Current state of supplier qualification in capital projects: Factors, practices, and industry perspectives. Journal of Construction Engineering and Management, 152(8): 04026111, ISSN 0733-9364

Albert, A; Jeelani, I and Han, K (2020) Developing hazard recognition skill among the next-generation of construction professionals. Construction Management and Economics, 38(11), pp. 1024-1039. ISSN 01446193

Alemu, S K (2022) Construction time prediction model for public building projects. Engineering, Construction and Architectural Management, 29(5), pp. 2183-2206. ISSN 0969-9988

Algahtany, M.; Radzi, A. R.; Rani, H. A. and Rahman, R. A. (2026) Sustainable development goals in the construction industry: Science mapping of present and future trends. Built Environment Project and Asset Management, pp. 1-20. ISSN 2044-124X

Alhaddad, H. and Galal Ahmed, K. (2026) Informal household-practiced urban agriculture as a contributor to sustainability and resilience: The case of emirati neighbourhoods. Smart and Sustainable Built Environment, 15(3), pp. 1085-1114. ISSN 2046-6099

Alhajeri, M A (2004) Post-construction liabilities for latent defects in building and construction contracts: the theoretical foundations and the allocation of risk, a comparative study in Kuwaiti, French, and English Law. PhD thesis, University of Essex, UK.

Alhiddi, A M (2022) Building better together: The relationship between organisational culture and stakeholder critical success factors in construction projects. PhD thesis, University of Northumbria at Newcastle, UK.

Alhosani, Y (2017) An empirical investigation of the demographics of top management team (TMT) and its influence in forecasting organizational outcome in international architecture, engineering and construction (AEC) firms: A fuzzy set approach. DEng thesis, Ecole de Technologie Superieure, Canada.

Alhumayani, H (2022) The feasibility of 3D printing technology as a new construction method for houses in Saudi Arabia. PhD thesis, Cardiff University, UK.

Alhumayn, S A (2018) Developing a framework for BIM implementation in the saudi arabian construction industry. PhD thesis, University of Wolverhampton, UK.

Alhusban, M (2018) Conceptual procurement framework for building information modelling uptake to enhance buildings' sustainability performance in the Jordanian public sector. PhD thesis, University of Portsmouth, UK.

Ali, B; Aibinu, A and Paton-Cole, V (2023) Facilitating agreement in disruption claims through disruption analysis methods. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Ali, N (2018) A framework for designing energy efficient dwellings satisfying socio-cultural needs in hot climates. PhD thesis, De Montfort University, UK.

Ali, S (2022) Identification of key factors that aid the decision on whether to refurbish-reuse or demolish-rebuild existing and newly designed buildings and highways. PhD thesis, London South Bank University, UK.

Alinaitwe, H; Apolot, R and Tindiwensi, D (2013) Investigation into the causes of delays and cost overruns in Uganda's public sector construction projects. Journal of Construction in Developing Countries, 18(2), pp. 33-47. ISSN 1823-6499

Alinaitwe, H M (2009) Prioritising lean construction barriers in Uganda's construction industry. Journal of Construction in Developing Countries, 14(1), pp. 15-30. ISSN 1823-6499

Aliu, J; Aghimien, D; Aigbavboa, C; Oke, A; Ebekozien, A and Temidayo, O (2023) Empirical investigation of discipline-specific skills required for the employability of built environment graduates. International Journal of Construction Education and Research, 19(4), pp. 460-479. ISSN 1557-8771

Aliu, J; Oke, A E; Abayomi, T; Aigbavboa, C and Makanjuola, S (2024) Exploring the critical success factors for adopting gamification in the Nigerian construction sector. Built Environment Project and Asset Management, 14(2), pp. 184-200. ISSN 2044-124X

Aljagoub, D (2025) Enhancing delamination detection and monitoring of concrete bridges through infrared thermography, deep learning, field data, and numerical simulations. PhD thesis, University of Delaware, USA.

Aljohani, A (2019) Cost overrun causality model in Saudi Arabian public sector construction projects. PhD thesis, Robert Gordon University, UK.

Alkamali, A (2025) Investing in biophilic design integration for stakeholders. PhD thesis, Arizona State University, USA.

Alkhamali, K S H (2014) Leadership style, organisational culture and disputes in public construction. PhD thesis, Heriot-Watt University, UK.

Alkhorayef, A N M (2014) Improving decision making on large scale investment projects: A psychological perspective. PhD thesis, University of Leeds, UK.

Alkhraisha, A (2023) Approaches for enhancing the construction and demolition waste management strategy in Jordan. PhD thesis, Anglia Ruskin University, UK.

Alkilani, S and Loosemore, M (2024) An investigation of how stakeholders influence construction project performance: A small and medium sized contractor's perspective in the Jordanian construction industry. Engineering, Construction and Architectural Management, 31(3), pp. 1272-1297. ISSN 0969-9988

Alkilani, S Z; Jupp, J and Sawhney, A (2013) Issues of construction health and safety in developing countries: A case of Jordan. Construction Economics and Building, 13(3), pp. 141-156. ISSN 2204-9029

Allouche, E N; Ariaratnam, S T and AbouRizk, S M (2001) Applications of horizontal characterization techniques in trenchless construction. Journal of Construction Engineering and Management, 127(6), pp. 476-484. ISSN 0733-9364

Alluqmani, A E (2014) Design and behaviour of R.C. Beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(2), pp. 158-176. ISSN 1726-0531

Almahmoud, Essam (2014) Social sustainability health check: A model for evaluating and optimising social value creation in construction projects. PhD thesis, University of Melbourne, Australia.

Almeida, Laura (2019) Energy-related occupant behaviour in green and non-rated buildings. PhD thesis, Western Sydney University, Australia.

Almutiri, Y R (2016) Empirical investigation into development of a curricular framework to embed building information modelling with undergraduate architectural programmes within Saudi Arabia. PhD thesis, University of Salford, UK.

Almås, A J; Lisø, K R; Hygen, H O; Øyen, C F and Thue, J V (2011) An approach to impact assessments of buildings in a changing climate. Building Research & Information, 39(3), pp. 227-238. ISSN 0961-3218

Alnasseri, N (2015) Managing and controlling airport construction projects: a strategic management framework for operators. PhD thesis, Northumbria University, UK.

Alnasseri N, O A S G (2013) Organizational culture, leadership style and effectiveness: A case study of middle eastern construction clients. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Alomari, K A; Gambatese, J A and Tymvios, N (2018) Risk perception comparison among construction safety professionals: Delphi perspective. Journal of Construction Engineering and Management, 144(12): 04018107, ISSN 0733-9364

Alongi, A; Angelotti, A; Rizzo, A and Zanelli, A (2021) Measuring the thermal resistance of double and triple layer pneumatic cushions for textile architectures. Architectural Engineering and Design Management, 17(3-4), pp. 334-346. ISSN 1745-2007

Alpmen, A S (2013) Development and implementation of a proactive safety performance evaluation system for general contractors. PhD thesis, Wayne State University, USA.

Alqasmi, Khalaf (2019) An investigation of unethical practices in the Saudi Arabian construction industry. PhD thesis, RMIT University, Australia.

Alshahrani, A Y (2020) Interpretive investigation into the implementation of sustainable business models within Saudi housing construction industry. PhD thesis, University of Salford, UK.

Alsharif, M A (2017) Improving sustainability on university campuses in Saudi Arabia: An assessment of organisational and decision-related opportunities and barriers. PhD thesis, University of Reading, UK.

Alshboul, O; Shehadeh, A; Al-Kasasbeh, M; Al Mamlook, R E; Halalsheh, N and Alkasasbeh, M (2022) Deep and machine learning approaches for forecasting the residual value of heavy construction equipment: A management decision support model. Engineering, Construction and Architectural Management, 29(10), pp. 4153-4176. ISSN 0969-9988

Alshehri, A M (2013) Conflict in architectural projects: diagnosis and avoidance: a study based on Saudi Arabian construction industry. PhD thesis, University of Manchester, UK.

Alsofyani, S (2021) An analysis of how culture influences the arbitration process used to resolve disputes on construction projects in Saudi Arabia. PhD thesis, University of Plymouth, UK.

Alvanchi, A and JavadiAghdam, S (2019) Job site weather index: an indicator for open environment construction projects. Construction Innovation, 19(1), pp. 110-124. ISSN 1471-4175

Alves, T d C L (2005) Buffering practices in HVAC ductwork supply chains. PhD thesis, University of California, Berkeley, USA.

Alvi, M I A (1990) The low-income housing production process in Lahore, Pakistan. PhD thesis, City of Birmingham Polytechnic, UK.

Alzaed, A (2012) User centered passive building design. PhD thesis, University of Liverpool, UK.

Alzahrani, H; Arif, M; Kaushik, A; Goulding, J and Heesom, D (2021) Artificial neural network analysis of teachers' performance against thermal comfort. International Journal of Building Pathology and Adaptation, 39(1), pp. 20-32. ISSN 23984708

Alzahrani, H; Arif, M; Kaushik, A K; Rana, M Q and Aburas, H M (2023) Evaluating the effects of indoor air quality on teacher performance using artificial neural network. Journal of Engineering, Design and Technology, 21(2), pp. 604-618. ISSN 1726-0531

Alzahrani, S (2015) Dynamic simulation of the impact of risk events and risk cost in KSA PPP projects. PhD thesis, University of Liverpool, UK.

Alzohbi, M G M (2015) A framework for evaluating material management performance in Jordanian concrete building projects. PhD thesis, Sheffield Hallam University, UK.

Amade, B; Ogbonna, A C and Nkeleme, E I (2022) An investigation of the factors affecting successful enterprise resource planning (ERP) implementation in Nigeria. Journal of Construction in Developing Countries, 27(1), pp. 41-63. ISSN 1823-6499

Amadi, A (2023) Integration in a mixed-method case study of construction phenomena: From data to theory. Engineering, Construction and Architectural Management, 30(1), pp. 210-237. ISSN 0969-9988

Amaechi, C V; Ullah, S; Deng, X; Beddu, S B; Ja'e, I A; Mohamed, D B and Syamsir, A (2026) Utilising factor analysis on political risks including strategies of managing firm-specific risk factors for multinational construction projects in Pakistan. Engineering, Construction and Architectural Management, 33(1), pp. 1-27. ISSN 0969-9988

Amarasinghe, A A S R; Agdas, D and Dawes, L (2025) Evaluating labour productivity and profitability in precast concrete manufacturing. Engineering, Construction and Architectural Management, 32(13), pp. 148-173. ISSN 0969-9988

Ambrose, M D and Tucker, S N (2000) Procurement system evaluation for the construction industry. Journal of Construction Procurement, 6(2), ISSN 1358-9180

Ameh, J O and Odusami, K T (2010) Nigerian building professionals' ethical ideology and perceived ethical judgement. Construction Economics and Building, 10(3), pp. 1-13. ISSN 2204-9029

Amies, P; Jin, X and Senaratne, S (2025) Success in construction management of dams: An empirical study. International Journal of Construction Management, 25(10), pp. 1207-1217. ISSN 1562-3599

Amiri, Mojtaba and Saghatforoush, Ehsan (2026) From exploration to prioritization: Advancing BIM-IOT integration for construction health and safety improvement. Journal of Construction Business and Management, 8(S1), pp. 125-139. ISSN 2521-0165

Amirudin, R B (1998) The application of a knowledge-based engineering approach to the structural design of steel framed office buildings. PhD thesis, University of Reading, UK.

Ammar, A I (2001) Profitability of electrical contractors using financial and economical data: The effect of company's size. PhD thesis, University of Wisconsin - Madison, USA.

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Botchway, E A (2025) Implementing the principles of circular economy in the construction industry: Exploratory and confirmatory factor analyses of strategies. Construction Innovation, 25(3), pp. 761-786. ISSN 1471-4175

Amudjie, J; Agyekum, K; Adinyira, E; Amos-Abanyie, S and Kumah, V M A (2023) Awareness and practice of the principles of circular economy among built environment professionals. Built Environment Project and Asset Management, 13(1), pp. 140-156. ISSN 2044-124X

An, Mi Sun (2024) Framework for interactive, individualized feedback design to improve thinking skills in construction education. PhD thesis, Texas A&M University, USA.

Anagnostou, E (2005) Investigation of risk management and uncertainty in Athens 2004 Olympic games: The Equestrian Centre case study. PhD thesis, University College London, UK.

Anbar, D R; Chang, T; Ullah, S; Alqershy, M T; Mousa, K and Deng, X (2026) The role of interpersonal distrust as a mediator of the relationship between ethnic minorities and knowledge hiding in international construction projects. Engineering, Construction and Architectural Management, 33(1), pp. 832-855. ISSN 0969-9988

André, J P C G (2014) Determination of the main parameters affecting the performance of bridge falsework systems. PhD thesis, Oxford Brookes University, UK.

Aniekwu, A (1995) The business environment of the construction industry in Nigeria. Construction Management and Economics, 13(6), pp. 445-455. ISSN 01446193

Aniekwu, A N and Okpala, D C (1988) Contractual arrangements and the performance of the Nigerian construction industry (the structural component). Construction Management and Economics, 6(1), pp. 3-11. ISSN 01446193

Anjomshoa, E (2025) Investigation of lightweight gypsum based on montmorillonite nanoclay with enhanced insulation properties. International Journal of Building Pathology and Adaptation, 43(7), pp. 1637-1659. ISSN 2398-4708

Ankrah, N A (2007) An investigation into the impact of culture on construction project performance. PhD thesis, University of Wolverhampton, UK.

Ankrah, N A and Proverbs, D (2004) Treading the softer areas of construction management: A critical review of culture. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Ankrah, N A; Proverbs, D and Debrah, Y (2009) Factors influencing the culture of a construction project organisation: An empirical investigation. Engineering, Construction and Architectural Management, 16(1), pp. 26-47. ISSN 0969-9988

Ansari, S (2020) Investigating the energy performance of a multiuse venue building. EngD thesis, University of Reading, UK.

Antoniadis, D (2009) Managing complexity in project teams. PhD thesis, Loughborough University, UK.

Antwi Afari, E. N.; Acquah, I. S. K.; Issau, K. and Arko-Folson, G. (2026) Modelling the nexus between sustainable project management and project success: Evidence from Ghana. Journal of Engineering, Design and Technology, 24(5), pp. 1279-1297. ISSN 1726-0531

Anumba, C J (1996) Issues in the investigation and reporting of housing subsidence: The problem of inaccurate diagnosis, which can often be traced to inadequacies in the procedures adopted, is examined in detail. Building Research & Information, 24(3), pp. 170-175. ISSN 0961-3218

Anund Vogel, J (2020) Incentivising Innovation in the Swedish Construction Industry. PhD thesis, KTH Royal Institute of Technology, Sweden.

Apu, N and Sinha, R (2020) Seismic fragility assessment of ductile reinforced concrete building frames. International Journal of Disaster Resilience in the Built Environment, 12(4), pp. 425-442. ISSN 1759-5916

Arab, M Z M (2011) A function-based cost model for early cost advice on new-build schools projects. PhD thesis, Heriot-Watt University, UK.

Arai, K and Morimoto, E (2023) Case study in shikoku: Changes in the bidding behaviour of businesses. International Journal of Construction Management, 23(2), pp. 225-233. ISSN 1562-3599

Aranda-Mena, G (2003) Mapping workers' cognitive structures of construction site hazards. PhD thesis, University of Reading, UK.

Arantes, Pedro Fiori (2010) Architecture in the financial-digital era: The design, construction, and rent of form. PhD thesis, Universidade de São Paulo, Brazil.

Arashpour, M; Wakefield, R; Blismas, N and Abbasi, B (2016) Quantitative analysis of rate-driven and due date-driven construction: Production efficiency, supervision, and controllability in residential projects. Journal of Construction Engineering and Management, 142(1): 05015012, ISSN 0733-9364

Araujo, Luís Otávio Cocito de (2005) Method to propose directions improving labor productivity in the steel reinforcement activities. PhD thesis, Universidade de São Paulo, Brazil.

Aravindraj, S and Vinodh, S (2014) Forty criteria based agility assessment using scoring approach in an Indian relays manufacturing organization. Journal of Engineering, Design and Technology, 12(4), pp. 507-518.

Arayici, Y; Tokdemir, O B and Kassem, M (2023) A quantitative, evidence-based analysis of correlations between lean construction and building information modelling. Smart and Sustainable Built Environment, 12(5), pp. 975-1001. ISSN 2046-6099

Arbabi, H; Salehi-Taleshi, M J and Ghods, K (2020) The role of project management office in developing knowledge management infrastructure. Engineering, Construction and Architectural Management, 27(10), pp. 3261-3287. ISSN 0969-9988

Arditi, D (1983) Diffusion of network planning in construction. Journal of Construction Engineering and Management, 109(1), pp. 1-12. ISSN 0733-9364

Arditi, D A (1973) An investigation into the behavioural and technical factors affecting success in the use of network analysis in the construction industry of Great Britain. PhD thesis, Loughborough University, UK.

Arico, Manuela (2025) Application of scan-to-BIM approaches to HBIM digitisations in architectural heritage environment for documentation, management and conservation purposes. PhD thesis, Università degli Studi di Palermo, Italy.

Arida, M A (2024) Enhancing thermal comfort in commercial buildings: Contributions of machine learning algorithms for optimizing predictive thermal comfort indices. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Arkani, S (1999) Contractual interfaces: the implications of building production process management and interorganisational relations for productivity in building project coalitions. PhD thesis, University of Greenwich, UK.

Arnold, Stuart (2008) Transforming systems engineering principles into integrated project team practice. PhD thesis, Cranfield University, UK.

Arthur, A C (2016) The impact of systems differentiation and affect heuristics in intuitive construction risk management decision making systems. PhD thesis, University College London, UK.

Arthur, A C and Pryke, S D (2014) Are we adding risk to our projects by mixing objective assessments of compound conjunctive and disjunctive project risks with intuitive approaches? In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Asa, E; Anna, A S and Baffoe-Twum, E (2019) An investigation of mechanical behavior of concrete containing crushed waste glass. Journal of Engineering, Design and Technology, 17(6), pp. 1285-1303. ISSN 1726-0531

Asadi, E (2020) Risk-informed multi-criteria decision framework for resilience and sustainability assessment of building structures. PhD thesis, Case Western Reserve University, USA.

Asadi, R; Wilkinson, S and Rotimi, J O B (2023) The common causes of rework in construction contracts: A diagnostic approach. Journal of Engineering, Design and Technology, 21(4), pp. 1107-1133. ISSN 1726-0531

Asadi, R; Wilkinson, S and Rotimi, J O B (2023) Mixed-method approach to the evaluation of rework provisions within general contract conditions. Construction Economics and Building, 23(3-4), pp. 45-70. ISSN 2204-9029

Asfour, O S and Gadi, M B (2006) Effect of integrating wind catchers with curved roofs on natural ventilation performance in buildings. Architectural Engineering and Design Management, 2(4), pp. 289-304. ISSN 1745-2007

Ashton, P (2003) A system designed to improve site investigation procedures and for the reduction of risk associated with uncertain site conditions. PhD thesis, University of Brighton, UK.

Aslan, Zaki M (2008) The design of protective structures for the conservation and presentation of archaeological sites. PhD thesis, University College London, UK.

Asnaashari, E; Knight, A; Hurst, A and Farahani, S S (2009) Causes of construction delays in Iran: Project management, logistics, technology and environment. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Assadi, S O A (1997) An investigation of the records kept by supervisors on construction sites. PhD thesis, University of Newcastle upon Tyne, UK.

Atanasov, V; Greenwood, D; Thurairajah, N and Hatcher, C (2021) Forensic delay analysis: An investigation of the reasons for disagreements in time-related disputes. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Atkinson, B (2000) Inca: A retrospective performance tool for project management. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Atmo, G and Duffield, C (2014) Improving investment sustainability for PPP power projects in emerging economies: Value for money framework. Built Environment Project and Asset Management, 4(4), pp. 335-351. ISSN 2044-124X

Attalla, M M A M (2000) Reconstruction of operating facilities: A model for project management. PhD thesis, University of Waterloo, Canada.

Auchterlounie, A C (2004) A new quality theory for UK private housebuilding based on definable quality principles, impression management and the control of cognitive dissonance. PhD thesis, Heriot-Watt University, UK.

Austigard, M S and Mattsson, J (2020) Monitoring climate change related biodeterioration of protected historic buildings. International Journal of Building Pathology and Adaptation, 38(4), pp. 529-538. ISSN 23984708

Awad, R (2018) Investigation into the effectiveness of construction interventions on the performance of emergency departments within NSW and QLD Health. PhD thesis, University of Newcastle, Australia.

Awuzie, B O and McDermott, P (2016) The role of contracting strategies in social value implementation. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 169(3), pp. 106-114. ISSN 17514304

Ayat, M; Rehman, H; Qureshi, S M and Kang, C W (2023) Assessing the causes of project overruns in tunnel construction projects in Pakistan. International Journal of Construction Management, 23(11), pp. 1856-1866. ISSN 1562-3599

Ayda Montaser, K and Heidari, S (2021) Optimizing window size by integrating energy and lighting analyses considering occupants' visual satisfaction. Built Environment Project and Asset Management, 11(4), pp. 673-686. ISSN 2044-124X

Aydinli, S (2024) Impact of unexpected conditions on construction cost forecasting performance: evidence from Europe. Construction Management and Economics, 42(9), pp. 787-801. ISSN 01446193

Aydın, D and Mıhlayanlar, E (2024) Determination of the significance of project delivery attributes (PDAs) on sustainable projects in Turkey. Journal of Engineering, Design and Technology, 22(5), pp. 1682-1703. ISSN 1726-0531

Ayed Eid, A (2021) Effect of the transversal-spacing of stirrup-legs on the behavior and strength of shallow concealed RC beams. Journal of Engineering, Design and Technology, 19(4), pp. 932-942. ISSN 1726-0531

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Ayodele, T T (2022) Cost-effective retrofit packages for low-middle income residential buildings in Nigeria. PhD thesis, De Montfort University, UK.

Azam, M A M; Ross, A D; Fortune, C J and Jaggar, D (1998) An information strategy to support effective construction design decision making. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Azhar, S and Choudhry, R M (2016) Capacity building in construction health and safety research, education, and practice in Pakistan. Built Environment Project and Asset Management, 6(1), pp. 92-105. ISSN 2044-124X

Azhar, S; Lukkad, M Y and Ahmad, I (2013) An investigation of critical factors and constraints for selecting modular construction over conventional stick-built technique. International Journal of Construction Education and Research, 9(3), pp. 203-225. ISSN 1557-8771

Azila-Gbettor, E M; Novieto, D T; Tulasi, E E; Ahiabu, M K and Adzivor, E K (2024) Citizenship fatigue and employee commitment: Moderating role of psychological ownership among artisans of family-owned construction firms. International Journal of Construction Management, 24(9), pp. 975-985. ISSN 1562-3599

Aziz, Z; Qasim, R M and Wajdi, S (2017) Improving productivity of road surfacing operations using value stream mapping and discrete event simulation. Construction Innovation, 17(3), pp. 294-323. ISSN 1471-4175

Babakhani, J and Veysi, F (2024) Investigation and optimization of forced convective heat transfer around a tall building using experimental results. International Journal of Building Pathology and Adaptation, 42(5), pp. 893-913. ISSN 2398-4708

Babalola, A; Manu, P; Cheung, C; Yunusa-Kaltungo, A; Bartolo, P; Gao, S and Perera, S (2022) Applications of immersive technologies for occupational safety and health management in the construction industry: A systematic review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Babalola, Akinloluwa S (2025) Application of immersive technologies for occupational safety and health management in the construction industry. PhD thesis, University of Manchester, UK.

Babatunde, S O; Adeniyi, O and Awodele, O A (2017) Investigation into the causes of delay in land acquisition for PPP projects in developing countries. Journal of Engineering, Design and Technology, 15(4), pp. 552-570.

Babatunde, S O; Awodele, O A and Adeniyi, O (2018) Opportunities and challenges of foreign direct investment utilisation and its impact on construction sector in developing countries. Journal of Financial Management of Property and Construction, 23(2), pp. 239-256. ISSN 1366-4387

Babatunde, S O; Ekundayo, D; Udeaja, C and Abubakar, U O (2022) An investigation into the sustainability practices in PPP infrastructure projects: A case of Nigeria. Smart and Sustainable Built Environment, 11(1), pp. 110-125. ISSN 2046-6099

Babatunde, S O; Perera, S; Ekundayo, D and Adeleke, D S (2020) An investigation into BIM uptake among contracting firms: An empirical study in Nigeria. Journal of Financial Management of Property and Construction, 26(1), pp. 23-48. ISSN 1366-4387

Babatunde, S O; Perera, S; Ekundayo, D and Adeleye, T E (2020) An investigation into BIM-based detailed cost estimating and drivers to the adoption of BIM in quantity surveying practices. Journal of Financial Management of Property and Construction, 25(1), pp. 61-81. ISSN 1366-4387

Babu, A.; Krishnan, K.; Dutta, P. and Khan, T. (2026) Multistakeholder SEM-based evaluation of safety factors in road construction projects. Journal of Construction Engineering and Management, 152(7): 04026084, ISSN 0733-9364

Badu, E; Edwards, D J; Owusu-Manu, D and Brown, D M (2012) Barriers to the implementation of innovative financing (IF) of infrastructure. Journal of Financial Management of Property and Construction, 17(3), pp. 253-273. ISSN 1366-4387

Bagheri, M; Roth, L; Siebke, L; Rohde, C and Linke, H J (2024) Implementing housing policies for a sufficient lifestyle. Buildings & Cities, 5(1), pp. 300-315. ISSN 2632-6655

Bai, Y (1996) Planning and control model for robotic bridge painting. PhD thesis, North Carolina State University, USA.

Bajpai, A and Misra, S C (2023) A framework for continuation of digitalization in construction: A PLS-SEM approach. Engineering, Construction and Architectural Management, 30(10), pp. 4715-4734. ISSN 0969-9988

Baker, H (2021) A multimethod approach to learning from text-based construction failure data. PhD thesis, University of Edinburgh, UK.

Baker, T O (2021) An investigation into pricing anomalies and the influence of information processing constraints on forecasts derived from sports betting markets. PhD thesis, University of Southampton, UK.

Bakhtiyari, S; Taghi Akbari, L and Jamali Ashtiani, M (2017) An investigation on fire hazard and smoke toxicity of epoxy FRP composites. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 230-237. ISSN 1759-5916

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Balasubramanian, S (2017) Green supply chain management: an investigation on the construction sector. PhD thesis, Middlesex University, UK.

Baldauf, J P; Formoso, C T and Tzortzopoulos, P (2021) Method for managing requirements in healthcare projects using building information modelling. Engineering, Construction and Architectural Management, 28(8), pp. 2090-2118. ISSN 0969-9988

Balogun, O J (2019) Innovation in quantity surveying practice firms: an investigation of innovation response during compressed pre-contract timelines in Nigeria. PhD thesis, University of Salford, UK.

Balogun, T B; Awonuga, O O and Abowen-Dake, R (2023) Investigating digital technological competencies amongst black Asian minority ethnic construction students in the UK. Journal of Engineering, Design and Technology, 21(6), pp. 1857-1882. ISSN 1726-0531

Banahene, K O; Anvuur, A and Dainty, A (2014) Conceptualising organisational resilience: An investigation into project organising. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(1), pp. 29-45. ISSN 0969-9988

Banks, M S (2012) Understanding information technology enabled social action networks: Construction, sustainability and user participation. PhD thesis, University of Memphis, USA.

Bansal, V K (2012) Application areas of GIS in construction projects and future research directions. International Journal of Construction Management, 12(4), pp. 17-36. ISSN 1562-3599

Banteli, A; Stevenson, V and Patel, H (2020) Embodied energy considerations in a BIM-enabled building design process: An ethnographic case study. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Barbachyn, S M; Devine, R D; Thrall, A P and Kurama, Y C (2017) Economic evaluation of high-strength materials in stocky reinforced concrete shear walls. Journal of Construction Engineering and Management, 143(10): 04017074, ISSN 0733-9364

Barontini, A (2021) Bio-inspired algorithms for structural health monitoring of civil engineering systems. PhD thesis, Universidade do Minho, Portugal.

Barr, D W J (2004) The department of trade and industry key performance indicators: A critical appraisal. PhD thesis, University of Southampton, UK.

Barrett, P and Sutrisna, M (2009) Methodological strategies to gain insights into informality and emergence in construction project case studies. Construction Management and Economics, 27(10), pp. 935-948. ISSN 1466433X

Barros, Natalia Nakamura (2024) Integrative model of life cycle assessment with internet of things, BIM and machine learning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Barry, S; Cronin, W; Spillane, J P and Bradley, J G (2021) Compliance with COVID-19 regulations in micro-enterprises and SMEs in the Irish construction sector. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Barton, D A (1988) The effects of step changes on the construction industry: A study of the reaction of construction industries to change. PhD thesis, University of Reading, UK.

Basha, M (2021) Intra-sector firm performance and its determinants in the UK construction industry. PhD thesis, University of Westminster, UK.

Bassindale, J (2020) Learning through successful feedback: Digital opportunities for effective feedback in project-based architectural education. International Journal of Construction Education and Research, 16(2), pp. 84-101. ISSN 1557-8771

Bastien, A N (2002) Successful organisational and human practices in the UK construction industry: proposing the CONSTRUCT framework of good practice. PhD thesis, University of Warwick, UK.

Bataglin, Fernanda Saidelles (2023) Prescriptive conceptual framework for planning and controlling engineer-to-order industrialized building systems. PhD thesis, Universidade Federal do Rio Grande do Sul, Brazil.

Batie, D L (1996) The incorporation of construction history into architectural history education: The "histcon" interactive computer program. PhD thesis, Texas A&M University, USA.

Batista, L T; Franco, J R Q; Fakury, R H; Porto, M F; Alves, L V R and Kohlmann, G S (2024) BIM-IoT-FM integration: strategy for implementation of sustainable water management in buildings. Smart and Sustainable Built Environment, 13(5), pp. 1096-1116. ISSN 2046-6099

Bausman, D C (2002) An empirical investigation of the relationship between strategic planning and performance of large construction firms. PhD thesis, Heriot-Watt University, UK.

Bavafa, M (2015) Enhancing information quality through building information modelling implementation within UK structural engineering organisations. PhD thesis, University of Salford, UK.

Bayandor, S; Kalatehjari, R; Akherati, R and Kasebzadeh, J (2025) Causes, effects and solutions of delay and cost overruns in Iranian deep excavation projects. Built Environment Project and Asset Management, 15(2), pp. 309-336. ISSN 2044-124X

Bayat, F.; Noorzai, E. and Golabchi, M. (2019) Identifying the most important public–private partnership risks in afghanistan's infrastructure projects. Journal of Financial Management of Property and Construction, 24(3), pp. 309-337. ISSN 1366-4387

Bayat, F; Noorzai, E and Golabchi, M (2019) Identifying the most important public-private partnership risks in Afghanistan's infrastructure projects. Journal of Financial Management of Property and Construction, 24(3), pp. 309-337. ISSN 1366-4387

Bayat, M; Khanzadi, M; Nasirzadeh, F and Chavoshian, A (2020) Financial conflict resolution model in BOT contracts using bargaining game theory. Construction Innovation, 20(1), pp. 18-42. ISSN 1471-4175

Bayhan, H G (2025) Transaction costs in construction project team communications: Language model and network science applications. PhD thesis, Michigan State University, USA.

Bazzan, J; Echeveste, M; Formoso, C T and Kowalski, J D S (2024) A data-driven customer complaint management model for residential building companies. Architectural Engineering and Design Management, 20(6), pp. 1381-1402. ISSN 1745-2007

Beard, J L (2011) Theoretical framework for determinants of A/E/C firm value, strategy and continuity: An analysis incorporating corporeal, volitional and knowledge assets. PhD thesis, Georgia Institute of Technology, USA.

Beatham, S (2003) Development of an integrated business improvement system for construction. EngD thesis, Loughborough University, UK.

Beavers, J E; Moore, J R; Rinehart, R and Schriver, W R (2006) Crane-related fatalities in the construction industry. Journal of Construction Engineering and Management, 132(9), pp. 901-910. ISSN 0733-9364

Beavers, J E; Moore, J R and Schriver, W R (2009) Steel erection fatalities in the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 227-234. ISSN 0733-9364

Becker, P E (2000) Modeling construction worker chemical exposures for compliance with OSHA permissible exposure limits: An investigation of lead exposures to highway bridge maintenance workers. DSc thesis, University of Massachusetts Lowell, USA.

Beech, N (2012) Constructing everyday life: an architectural history of the South Bank in production, 1948-1951. PhD thesis, University College London, UK.

Behar, C B (2016) A socio-technical perspective of ventilation practices in UK social housing with whole house ventilation systems: design, everyday life and change. PhD thesis, University College London, UK.

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Behm, M (2012) Safe design suggestions for vegetated roofs. Journal of Construction Engineering and Management, 138(8), pp. 999-1003. ISSN 0733-9364

Behm, M and Schneller, A (2013) Application of the Loughborough construction accident causation model: A framework for organizational learning. Construction Management and Economics, 31(6), pp. 580-595. ISSN 1466433X

Behzadi, N and Fadeyi, M O (2012) A preliminary study of indoor air quality conditions in Dubai public elementary schools. Architectural Engineering and Design Management, 8(3), pp. 192-213. ISSN 1745-2007

Belayutham, S; Che Ibrahim, C K I; Zulkifli, A R and Ibrahim, N (2019) A dual-functional social innovation process model for low-cost houses through university-enabled initiative. Construction Innovation, 19(2), pp. 126-148. ISSN 1471-4175

Bell, T (2018) A detailed investigation into the engineering properties and challenges affecting the potential introduction of a UK grown dowel-laminated timber floor panel into the domestic construction market. PhD thesis, University of Strathclyde, UK.

Bello, A O; Eje, D O; Idris, A; Semiu, M A and Khan, A A (2024) Drivers for the implementation of modular construction systems in the AEC industry of developing countries. Journal of Engineering, Design and Technology, 22(6), pp. 2043-2062. ISSN 1726-0531

Bello, A O and Ayegba, C (2025) Adoption of building information modelling for post-construction in Nigeria: Examination of barriers and strategies development. International Journal of Building Pathology and Adaptation, 43(6), pp. 1501-1521. ISSN 2398-4708

Bender, M J (1996) A framework for collaborative planning and investigations of decision support tools for hydro development. PhD thesis, University of Manitoba, Canada.

Benmansour, C and Hogg, K (2002) An investigation into the barriers to innovation and their relevance within the construction sector. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Bennett, L (2011) Judges, child trespassers and occupiers' liability. International Journal of Law in the Built Environment, 3(2), pp. 126-145. ISSN 1756-1450

Berry, M J (2000) An investigation into the incidence effect and management of conflict arising out of the construction process: A case study based approach. PhD thesis, University of Wales, UK.

Bertz, M D (1998) Situated learning methodologies and assessment in civil engineering structures education. PhD thesis, Georgia Institute of Technology, USA.

Bevan, W (2016) An investigation of the required skills for the delivery of low and zero carbon buildings within a region. PhD thesis, University of Reading, UK.

Bevan, W; Lu, S L and Sexton, M (2020) Skills required to deliver energy efficient school retrofit buildings. Engineering, Construction and Architectural Management, 27(10), pp. 3051-3073. ISSN 0969-9988

Beyh, S (2004) Computer and communication engineering: internet protocol telephony in construction. PhD thesis, University of Salford, UK.

Bhagwat, K and Delhi, V S K (2023) Review of construction safety performance measurement methods and practices: A science mapping approach. International Journal of Construction Management, 23(4), pp. 729-743. ISSN 1562-3599

Bhandiwad, M S; Dodamani, B M and M.D, D (2025) Effect of the drag coefficient on the performance of vertical porous baffles in a sloshing tank. Journal of Engineering, Design and Technology, 23(3), pp. 744-765. ISSN 1726-0531

Bhangale, K; Joshi, K; Gupta, R and Gardas, B (2025) Assessing project complexity factors for railway megaprojects: A Delphi-BWM approach. Journal of Engineering, Design and Technology, 23(3), pp. 973-997. ISSN 1726-0531

Bhatnagar, S; Jacob, G; Devkar, G; Rybkowski, Z K; Arefazar, Y and Obulam, R (2023) A systematic review of lean simulation games in the construction industry. Architectural Engineering and Design Management, 19(6), pp. 701-719. ISSN 1745-2007

Bhaurkar, V P and Thakur, A G (2019) Investigation of crack in beams using anti-resonance technique and FEA approach. Journal of Engineering, Design and Technology, 17(6), pp. 1266-1284. ISSN 1726-0531

Bhavsar, V; Thomas Alex, S; Vaishnav, P K; Jose, A; Koshy, N G and Atiwadkar, S (2022) Investigation of critical factors influencing construction of airports: The case of India. International Journal of Construction Management, 22(15), pp. 2905-2913. ISSN 1562-3599

Biagi, Silvia (2025) BIM for public administration: Critical investigation of the European situation and implementation perspectives for the Italian case. PhD thesis, Università degli Studi di Pisa, Italy.

Bigelow, B F; Bilbo, D and Baker, M (2016) Construction management research: A comparison of perceived value by general contractors, prevalence of publication, and funding. International Journal of Construction Education and Research, 12(3), pp. 224-240. ISSN 1557-8771

Biggins, D (2018) An exploratory investigation into how project management methods are chosen and implemented by organisations in the UK. PhD thesis, University of Manchester, UK.

Bignami, D F (2017) Testing solutions of a multi-disaster building's certification functional to the built environment sustainability and resilience. International Journal of Disaster Resilience in the Built Environment, 8(1), pp. 77-97. ISSN 1759-5916

Birchall, S J (2011) An appraisal of the performance of a 'green' office building. PhD thesis, University of Leeds, UK.

Birkes, A Y (1999) Multimedia data definition and requirements for construction applications. PhD thesis, Georgia Institute of Technology, USA.

Birnie, J W (1993) A behavioural study using decision analysis of building cost prediction by chartered quantity surveyors. PhD thesis, Ulster University, UK.

Blaza, S (1995) Implementing an integrated management information system in a medium sized construction firm. PhD thesis, Sheffield Hallam University, UK.

Blismas, N G (2001) Multi project environments of construction clients. PhD thesis, Loughborough University, UK.

Blismas, N G; Sher, W D; Thorpe, A and Baldwin, A N (2004) Factors influencing project delivery within construction clients' multi-project environments. Engineering, Construction and Architectural Management, 11(2), pp. 113-125. ISSN 0969-9988

Bo, X and Chan, A P C (2012) Investigation of barriers to entry into the design-build market in the people's republic of China. Journal of Construction Engineering and Management, 138(1), pp. 120-127. ISSN 0733-9364

Boadu, E. F.; Wang, C. C. and Sunindijo, R. Y. (2021) Challenges for occupational health and safety enforcement in the construction industry in Ghana. Construction Economics and Building, 21(1), pp. 1-21. ISSN 2204-9029

Boadu, Elijah Frimpong (2022) A framework for promoting health and safety through procurement in the construction industry in developing countries: A case of Ghana. PhD thesis, University of New South Wales, Australia.

Bodiford, A D (2007) The impact of gender diversity in the culture of the construction industry. PhD thesis, Nova Southeastern University, USA.

Boice, J R (1970) A history and evaluation of the school construction systems development project, 1961-1967. EdD thesis, Stanford University, USA.

Boje, C P (2018) Knowledge representation, storage and retrieval for BIM supported building evacuation design. PhD thesis, Cardiff University, UK.

Bojic, M; Yik, F and Lee, M (2003) Influence of air-conditioning exhaust on exterior recessed space. Building Research & Information, 31(1), pp. 24-33. ISSN 0961-3218

Bolchover, J and Mundle, K (2026) Post-disaster reconstruction: Infill housing prototypes for kathmandu. Buildings & Cities, 7(1), pp. 273-292. ISSN 2632-6655

Bonanomi, Marcella Maria Melania Teodora (2018) Digital transformation of multidisciplinary design firms: A systematic analysis-based approach to change management. PhD thesis, Politecnico di Milano, Italy.

Bonnar, I D (2007) Not as cool as fighter pilots: an exploration of identity and learning for full-time quantity surveying students. EdD thesis, University of Stirling, UK.

Boonyanan, A; Robinson, H; Fong, D and Naoum, S (2008) Relationship and knowledge management among construction development project members in Thailand: The clients' perspective. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Bouazza, T and Greenwood, D (2020) An investigation of performance gaps in the design of UK healthcare facilities. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Bouchlaghem, D; Shang, H; Anumba, C J; Cen, M; Miles, J and Taylor, M (2005) ICT-enabled collaborative working environment for concurrent conceptual design. Architectural Engineering and Design Management, 1(4), pp. 261-280. ISSN 1745-2007

Boudlal, Youssef Ait (2014) Project management and its relation to long-term project success: An empirically based theoretical framework. PhD thesis, University of Louisville, USA.

Bougrain, F (2012) Energy performance and public private partnership. Built Environment Project and Asset Management, 2(1), pp. 41-55. ISSN 2044-124X

Bouhamou, N E; Belas, N; Attar, A; Achour, B and Mebrouki, A (2011) Properties of self-consolidating concrete produced using local algerian materials. Journal of Construction in Developing Countries, 16(2), pp. 1-25. ISSN 1823-6499

Boussabaine, A H and Kirkham, R J (2004) Simulation of maintenance costs in UK local authority sport centres. Construction Management and Economics, 22(10), pp. 1011-1020. ISSN 01446193

Boussabaine, A H; Thomas, R and Elhag, T M S (1999) Modelling cost-flow forecasting for water pipeline projects using neural networks. Engineering, Construction and Architectural Management, 6(3), pp. 213-224. ISSN 0969-9988

Boustras, G; Bratskas, R; Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(1), pp. 19-31. ISSN 1726-0531

Bowen, P; Peihua Zhang, R and Edwards, P (2021) An investigation of work-related strain effects and coping mechanisms among South African construction professionals. Construction Management and Economics, 39(4), pp. 298-322. ISSN 01446193

Bowles, Graeme (1995) Annual sinking fund modelling for housing association major repairs provision. PhD thesis, Abertay University, UK.

Bowron, J (2002) Re-engineering the project procurement process through concurrent engineering. PhD thesis, Loughborough University, UK.

Br chner, J (1994) Precontractual investigation and risk aversion. Engineering, Construction and Architectural Management, 1(2), pp. 91-101. ISSN 0969-9988

Bradley, R A; Gohnert, M and Bulovic, I (2018) Construction considerations for low-cost earth brick shells. Journal of Construction in Developing Countries, 23(1), pp. 43-60. ISSN 1823-6499

Brady, D A (2014) Using visual management to improve transparency in planning and control in construction. PhD thesis, University of Salford, UK.

Brady, D A; Tzortzopoulos, P; Rooke, J; Formoso, C T and Tezel, A (2018) Improving transparency in construction management: A visual planning and control model. Engineering, Construction and Architectural Management, 25(10), pp. 1277-1297. ISSN 0969-9988

Brady, L (2019) An investigation into the management of energy performance for building services systems: design to operation. PhD thesis, Liverpool John Moores University, UK.

Brady, M (1991) Growing a housebuilder: Investigating a context for learning and modeling principles of transpersonal psychology. PhD thesis, Institute of Transpersonal Psychology, USA.

Braimah, N (2008) An investigation into the use of construction delay and disruption analysis methodologies. PhD thesis, University of Wolverhampton, UK.

Brandalise, Fernanda Marisa Pasinato (2023) A typology for describing and assessing visual management in construction projects. PhD thesis, Universidade Federal do Rio Grande do Sul, Brazil.

Bresnen, M and Marshall, N (2000) Motivation, commitment and the use of incentives in partnerships and alliances. Construction Management and Economics, 18(5), pp. 587-598. ISSN 01446193

Bresnen, M J (1986) A study of forms of project organisation and matrix management: case studies from the construction industry. PhD thesis, University of Nottingham, UK.

Brewer, G (2008) Innovation and attitude: mapping the profile of ICT decision-makers in architectural, engineering and construction firms. PhD thesis, University of Newcastle, Australia.

Brewer, G; Gajendran, T; Jefferies, M; McGeorge, D; Rowlinson, S and Dainty, A (2013) Value through innovation in long-term service delivery: Facility management in an Australian PPP. Built Environment Project and Asset Management, 3(1), pp. 74-88. ISSN 2044-124X

Brooker, P (1997) Factors which impact on the choice of alternative dispute resolution in the construction industry. PhD thesis, Oxford Brookes University, UK.

Brooks, T; Scott, L; Spillane, J P and Hayward, K (2020) Irish construction cross border trade and brexit: Practitioner perceptions on the periphery of Europe. Construction Management and Economics, 38(1), pp. 71-90. ISSN 01446193

Brooks, T and Spillane, J (2016) Does inappropriate quality control demotivate workers? A critical review. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Brown, C J (1985) A critical analysis of the application of management information systems in the civil engineering construction industry in South Africa. DBA thesis, University of Pretoria, South Africa.

Bruno, Silvana (2019) The implementation of automatic diagnostics and monitoring towards diagnosis-aided historic building information modelling and management. PhD thesis, Politecnico di Bari, Italy.

Bryde, D J (2000) Project management: uses, structures, systems and influences. PhD thesis, Liverpool John Moores University, UK.

Bröchner, J (2009) Construction metaphors in Aristotle: Knowledge, purpose, process. Construction Management and Economics, 27(5), pp. 515-523. ISSN 1466433X

Buckingham, H (2010) Accommodating change? An investigation of the impacts of government contracting processes on third sector providers of homelessness services in South East England. PhD thesis, University of Southampton, UK.

Budayan, C; Dikmen, I and Birgonul, M T (2013) Investigation of drivers and modes of differentiation in Turkish construction industry. Engineering, Construction and Architectural Management, 20(4), pp. 345-364. ISSN 0969-9988

Buhamizo, I; Muhwezi, L and Sengonzi, R (2023) A regression model to enhance the profitability of local construction contractors in Uganda. Journal of Construction in Developing Countries, 28(1), pp. 221-241. ISSN 1823-6499

Burrows, B G (1989) Organisation and quality of falsework construction: A socio-economic study of the organisational structure of the construction industry with respect to the falsework production process and the quality of workmanship attained. PhD thesis, University of Warwick, UK.

Burtonshaw-Gunn, S A (2001) Strategic supply chain management: Critical success factors for partnering relationships within the UK construction industry. PhD thesis, Manchester Metropolitan University, UK.

Busic-Sontic, A (2019) Energy efficiency investments in residential buildings: does personality matter? PhD thesis, University of Cambridge, UK.

Bust, P D (2011) Changing occupational health and safety practices in the manual handling of highway kerbs: cultural impediments and obstacles to innovation. PhD thesis, Loughborough University, UK.

Bélafi, Z D (2018) Analysis and modelling of occupant behaviour to support building design and performance optimisation. PhD thesis, Budapest University of Technology and Economics, Hungary.

Bügl, R; Leimgruber, C; Hüni, G R and Scholz, R W (2009) Sustainable property funds: Financial stakeholders' views on sustainability criteria and market acceptance. Building Research & Information, 37(3), pp. 246-263. ISSN 0961-3218

Cai, K Q (2007) Business process model for process improvement: an investigation of the tendering process in aconstruction company. PhD thesis, University of Hong Kong, Hong Kong.

Caiden, D (2017) Engineering expert witness work: What the lawyers require. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(4), pp. 181-185. ISSN 17514304

Cakan, H; Kazan, E and Usmen, M (2014) Investigation of factors contributing to fatal and non-fatal roofer fall accidents. International Journal of Construction Education and Research, 10(4), pp. 300-317. ISSN 1557-8771

Cakmak, P I and Akturk, B (2024) An in-depth investigation of digital construction technologies from a building economics perspective. Construction Economics and Building, 24(3), pp. 40-75. ISSN 2204-9029

Calzadilla, E; Awinda, K and Parkin, A (2012) An examination of the risk management process in Venezuelan construction projects. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Campbell, M A and Gunning, J G (2020) Strategies to improve mental health and well-being within the UK construction industry. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 173(2), pp. 64-74. ISSN 17514304

Cao, D and Cheng, L (2025) Risk accumulation assessment method for building construction based on complex network. Engineering, Construction and Architectural Management, 32(3), pp. 1522-1545. ISSN 0969-9988

Cardellino, P; Araneda, C and García Alvarado, R (2018) Interventions in the classroom–the influence of spatial organisation on educational interaction in Uruguay. Architectural Engineering and Design Management, 14(6), pp. 413-426. ISSN 1745-2007

Carino, N J; Lew, H S and Stone, W C (1984) Investigation of East Chicago ramp collapse. Journal of Construction Engineering and Management, 110(1), pp. 1-18. ISSN 0733-9364

Carnemolla, P; Mackinnon, K; Darcy, S and Almond, B (2025) Public toilets for accessible and inclusive cities: Disability, design and maintenance from the perspective of wheelchair users. Smart and Sustainable Built Environment, 14(6), pp. 1729-1751. ISSN 2046-6099

Carr, P G (2000) An investigation of the relationship between personality traits and performance for engineering and architectural professionals providing design services to the building sector of the construction industry. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Carr, P G (2005) Investigation of bid price competition measured through prebid project estimates, actual bid prices, and number of bidders. Journal of Construction Engineering and Management, 131(11), pp. 1165-1172. ISSN 0733-9364

Carrick, D (2022) How factors of collaboration affect delivery of construction projects with a high degree of reliance on building services: an action research and cross-case study analysis of Edinburgh primary schools. DProf thesis, University of Salford, UK.

Carrillo, P M (2001) Mergers and acquisitions in the construction industry: an exploratory study. PhD thesis, Loughborough University, UK.

Carroll, Steven Paige (2005) Risk-based approach to on-site wastewater treatment system siting design and management. PhD thesis, Queensland University of Technology, Australia.

Carter, G and Smith, S D (2006) Safety hazard identification on construction projects. Journal of Construction Engineering and Management, 132(2), pp. 197-205. ISSN 0733-9364

Castillo, T; Alarcón, L F and Salvatierra, J L (2018) Effects of last planner system practices on social networks and the performance of construction projects. Journal of Construction Engineering and Management, 144(3): 04017120, ISSN 0733-9364

Castro-Lacouture, D; Süer, G A; Gonzalez-Joaqui, J and Yates, J K (2009) Construction project scheduling with time, cost, and material restrictions using fuzzy mathematical models and critical path method. Journal of Construction Engineering and Management, 135(10), pp. 1096-1104. ISSN 0733-9364

Catalina, A J (2016) Development of a statistical theory-based capital cost estimating methodology for light rail transit corridor evaluation under varying alignment characteristics. PhD thesis, University of Kentucky, USA.

Catrillo, C (2025) Investigation of sprinkler requirements in one-or-two-family newly constructed homes. DPA thesis, Walden University, USA.

Cavalcante, Marcelo Gadelha (2019) Formation of operational risk in civil construction. PhD thesis, Universidade de Fortaleza, Brazil.

Chachere, B P (1978) An investigation of some aspects of affirmative action programs in the construction industry. PhD thesis, University of California, Berkeley, USA.

Chakraborty, B and Das, S (2014) MGNEGRA and water management: Sustainability issues of built forms in rural India. Journal of Construction in Developing Countries, 19(2), pp. 33-50. ISSN 1823-6499

Challender, J; Farrell, P and Sherratt, F (2014) Partnering practices: An investigation of influences on project success. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Chammout, B and El-Adaway, I H (2025) Circular economy in construction: Decision-making factors and future research avenues. Journal of Construction Engineering and Management, 151(6): 04025059, ISSN 0733-9364

Chan, A P C (1995) Towards an expert system on project procurement. Journal of Construction Procurement, 1(2), pp. 111-123. ISSN 1358-9180

Chan, A P C; Tetteh, M O and Nani, G (2022) Drivers for international construction joint ventures adoption: A systematic literature review. International Journal of Construction Management, 22(8), pp. 1571-1583. ISSN 1562-3599

Chan, D W M (1998) Modelling construction durations for public housing projects. PhD thesis, University of Hong Kong, Hong Kong.

Chan, D W M and Kumaraswamy, M M (1995) A study of the factors affecting construction durations in Hong Kong. Construction Management and Economics, 13(4), pp. 319-333. ISSN 01446193

Chan, D W M and Kumaraswamy, M M (1999) Modelling and predicting construction durations in Hong Kong public housing. Construction Management and Economics, 17(3), pp. 351-362. ISSN 01446193

Chan, E H W and Chan, A T S (2002) Development of professional system in the construction industry of China. Journal of Construction Research, 3(2), pp. 271-284. ISSN 1609-9451

Chan, K C G (2012) The use of virtual reality for visualizing construction safety management process. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chan, Man-Yin Ede (2018) Enablers for knowledge management implementation by large construction organisations in Hong Kong. PhD thesis, Griffith University, Australia.

Chan, P; Cooper, R and Tzortzopoulos, P (2005) Organizational learning: Conceptual challenges from a project perspective. Construction Management and Economics, 23(7), pp. 747-756. ISSN 01446193

Chan, P L (2004) Critical success factors for delivering healthcare projects in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chandra, Shailja (2006) Investigating green building assessment tools: a risk-analysis based approach. PhD thesis, University of New South Wales, Australia.

Chandra, V; Loosemore, M and McGeorge, D (2004) Cultural learning in the hospital sector: An investigation of the briefing process in strategic facilities management. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Chandra, Venny (2007) An investigation of cultural learning during the hospital process from a facilities management perspective. PhD thesis, University of New South Wales, Australia.

Chang, L-M (1983) Evaluation and improvement of craftsman questionnaire in measuring construction productivity. PhD thesis, University of Texas at Austin, USA.

Chang, W C; Esmaeili, B and Hasanzadeh, S (2025) Impacts of physical and informational failures on worker-autonomy trust in future construction. Journal of Construction Engineering and Management, 151(4): 04025011, ISSN 0733-9364

Chang, Y; Wilkinson, S; Potangaroa, R and Seville, E (2012) Managing resources in disaster recovery projects. Engineering, Construction and Architectural Management, 19(5), pp. 557-580. ISSN 0969-9988

Chaparro, D A; Ying, F J; Rotimi, F E and Egbelakin, T (2020) Commute and labour productivity: Investigation of inner city construction sites. Journal of Engineering, Design and Technology, 18(5), pp. 1305-1319. ISSN 1726-0531

Chapman, C (2023) Green and grey drainage infrastructure: costs and benefits of reducing surface water flood risk. PhD thesis, University of Oxford, UK.

Chapman, R J (1998) An investigation of the risk of changes to key project personnel during the design stage. PhD thesis, University of Reading, UK.

Charles, Robert Douglas (2025) An investigation into the performance and implementation of the early contractor involvement procurement model within the Australian infrastructure sector. PhD thesis, Queensland University of Technology, Australia.

Chau, K W (1998) The implications of the difference in the growth rates of the prices of building resources and outputs in Hong Kong. Engineering, Construction and Architectural Management, 5(1), pp. 38-50. ISSN 0969-9988

Chaurasia, S S and Verma, S (2020) Strategic determinants of big data analytics in the AEC sector: A multi-perspective framework. Construction Economics and Building, 20(4), pp. 63-81. ISSN 2204-9029

Chen, C (2019) Heterogeneous integration of BIM with low-cost indoor mobile laser scanning method for building fabric maintenance in China. PhD thesis, University of Nottingham, UK.

Chen, C and Messner, J I (2005) An investigation of Chinese BOT projects in water supply: A comparative perspective. Construction Management and Economics, 23(9), pp. 913-925. ISSN 01446193

Chen, G; Yan, Z; Hao, Y; Li, Q and Tian, Y (2025) BIM value creation through collaboration in construction projects: An empirical model with multiple collaborative behaviors. Journal of Construction Engineering and Management, 151(6): 04025048, ISSN 0733-9364

Chen, G; Zhang, G; Xie, Y M and Jin, X H (2012) Overview of alliancing research and practice in the construction industry. Architectural Engineering and Design Management, 8(2), pp. 103-119. ISSN 1745-2007

Chen, J-H (2003) Litigation prediction model for construction disputes caused by change orders. PhD thesis, University of Wisconsin - Madison, USA.

Chen, L and Mohamed, S (2008) Contribution of knowledge management activities to organisational business performance. Journal of Engineering, Design and Technology, 6(3), pp. 269-285. ISSN 1726-0531

Chen, L and Mohamed, S (2008) Impact of the internal business environment on knowledge management within construction organisations. Construction Innovation, 8(1), pp. 61-81. ISSN 1471-4175

Chen, Le (2007) Linking knowledge management to organisational business performance in construction. PhD thesis, Griffith University, Australia.

Chen, N (2017) An investigation of the influence of project complexity on communications in engineering construction projects. PhD thesis, University of Hong Kong, Hong Kong.

Chen, R (2025) Investigation of mechanical and thermal performances and masonry quality for new raw soil-based insulating hollow bricks. Architectural Engineering and Design Management, 21(3), pp. 533-552. ISSN 1745-2007

Chen, T; Hu, H and Zhu, F (2020) Developing a hierarchical road layout method for large-scale construction site. Journal of Construction Engineering and Management, 146(9): 04020115, ISSN 0733-9364

Chen, Y (2008) Using mobile computing for construction site information management. PhD thesis, University of Newcastle upon Tyne, UK.

Chen, Y (2008) A highway work zone design and traffic management decision system. PhD thesis, University of Wisconsin - Madison, USA.

Chen, Y (2013) Measurement models of building information modeling maturity. PhD thesis, Purdue University, USA.

Chen, Y; Dib, H and Cox, R F (2014) A measurement model of building information modelling maturity. Construction Innovation, 14(2), pp. 186-209. ISSN 1471-4175

Chen, Y and Yang, Z (2018) Validity and reliability of rating scales for subjective breathing resistance of wearing respirators. Journal of Engineering, Design and Technology, 16(6), pp. 837-849. ISSN 1726-0531

Chen, Y E; Ahiaga-Dagbui, D; Thaheem, M and Shrestha, A (2022) Optimism bias in transport project cost appraisal: A review of the current body of knowledge. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Chen, Y J (2012) Strategic implications of e-business in the construction industry. PhD thesis, Loughborough University, UK.

Chen, Yu (2024) Improving information requirements management in complex rail transport projects. PhD thesis, University of Technology Sydney, Australia.

Chen, Yuxuan (2024) Investigation of faults in air-conditioning systems in commercial buildings: Occurrence, diagnostic validation, and energy impacts. PhD thesis, University of Nebraska - Lincoln, USA.

Chen, Z; Zhou, X; Zhang, Z; Yan, H; Niu, X and Li, Y (2025) Using the decomposed theory of planned behavior and a structural equation model with partial least squares to investigate construction and demolition waste reduction behavior. Journal of Construction Engineering and Management, 151(8): 04025105, ISSN 0733-9364

Cheng, L; Ren, H; Guo, H and Cao, D (2025) Research on the evaluation method for safety cognitive ability of workers in high-risk construction positions. Engineering, Construction and Architectural Management, 32(12), pp. 8196-8218. ISSN 0969-9988

Cheng, J and Proverbs, D G (2004) The impact of strategic decisions on construction client satisfaction. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Cheung, Esther (2009) Developing a best practice framework for implementing public private partnerships (PPP) in Hong Kong. PhD thesis, Queensland University of Technology, Australia.

Cheung, S-O (1998) Project dispute resolution satisfaction of construction clients in Hong Kong. PhD thesis, University of Wolverhampton, UK.

Chigara, B (2018) Integrating sustainability principles in construction health and safety management practices in Zimbabwe. PhD thesis, Nelson Mandela University, South Africa.

Chileshe, N (2004) The application of TQM within small and medium sized construction related organisations. PhD thesis, Sheffield Hallam University, UK.

Chileshe, N; Edwards, D J; Kavishe, N and Haupt, T C (2020) Perception on challenges impacting bid decision of indigenous building contractors in Dar es Salaam, Tanzania. Journal of Engineering, Design and Technology, 18(6), pp. 1641-1662. ISSN 1726-0531

Chileshe, N; Rameezdeen, R and Hosseini, M R (2016) Drivers for adopting reverse logistics in the construction industry: A qualitative study. Engineering, Construction and Architectural Management, 23(2), pp. 134-157. ISSN 0969-9988

Chin, C S and Russell, J S (2008) Predicting the expected service level and the realistic lead time of rfi process using binary logistic regression. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Chin, C-S (2008) An investigation to improve construction information flows. PhD thesis, University of Wisconsin - Madison, USA.

Chinazzo, G (2021) Investigating the indoor environmental quality of different workplaces through web-scraping and text-mining of glassdoor reviews. Building Research & Information, 49(6), pp. 695-713. ISSN 0961-3218

Chinowsky, P S and Meredith, J E (2000) Strategic management in construction. Journal of Construction Engineering and Management, 126(1), pp. 1-9. ISSN 0733-9364

Chinyio, E A; Olomolaiye, P O; Kometa, S T and Harris, F C (1998) A needs-based methodology for classifying construction clients and selecting contractors. Construction Management and Economics, 16(1), pp. 91-98. ISSN 01446193

Cho, Y (2000) The Korean housebuilding industry: aspects of growth, efficiency and diversification, 1980-1995. PhD thesis, London School of Economics and Political Science, UK.

Choi, J O; Chen, X B and Kim, T W (2019) Opportunities and challenges of modular methods in dense urban environment. International Journal of Construction Management, 19(2), pp. 93-105. ISSN 1562-3599

Chokwitthaya, C (2020) A framework for augmenting building performance models using machine learning and immersive virtual environment. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Choo, H J (2003) Distributed planning and coordination to support lean construction. PhD thesis, University of California, Berkeley, USA.

Chotia, V and Rao, N V M (2018) Infrastructure financing and economic growth in India: An empirical investigation. Journal of Financial Management of Property and Construction, 23(3), pp. 258-273. ISSN 1366-4387

Chou, J. S.; Yeh, P. C.; Liu, C. Y. and Chen, K. J. (2026) Improving detection of pollution fee declarations for environmental policy compliance through metaheuristic-optimized ensemble learning. Engineering, Construction and Architectural Management, 33(7), pp. 5820-5848. ISSN 0969-9988

Chow, L K and Ng, S T (2003) Performance-based evaluation for engineering consultants: A study of assessment criteria. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Chowdhooree, I and Islam, I (2018) Factors and actors for enhancing community flood resilience: An experience from a river-side settlement in Bangladesh. International Journal of Disaster Resilience in the Built Environment, 9(2), pp. 153-169. ISSN 1759-5916

Chua, D K H and Goh, Y M (2004) Incident causation model for improving feedback of safety knowledge. Journal of Construction Engineering and Management, 130(4), pp. 542-551. ISSN 0733-9364

Clarke, L and Herrmann, G (2004) Cost vs. Production: Disparities in social housing construction in Britain and Germany. Construction Management and Economics, 22(5), pp. 521-532. ISSN 01446193

Clarke, L; van der Meer, M; Bingham, C; Michielsens, E and Miller, S (2009) Enabling and disabling: Disability in the British and Dutch construction sectors. Construction Management and Economics, 27(6), pp. 555-566. ISSN 1466433X

Clarke, N; Bradley, J G and Spillane, J P (2020) Mental health and well-being in micro-enterprises in the construction industry: An Irish perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Clarkson, Luke (2021) Comprehensive monitoring strategy for tailings dams. PhD thesis, University of Queensland, Australia.

Clegg, S and Kreiner, K (2014) Fixing concrete: Inquiries, responsibility, power and innovation. Construction Management and Economics, 32(3), pp. 262-278. ISSN 01446193

Coble, R J (1992) An empirical investigation of factors related to the construction industry drug-free workplace for general contractors. PhD thesis, University of Florida, USA.

Cocerhan, I and Bradley, J (2019) Investigation into how technology can overcome language barriers experienced by construction workers from eastern Europe on sites in London. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Codinhoto, R (2013) Evidence and design: an investigation of the use of evidence in the design of healthcare environments. PhD thesis, University of Salford, UK.

Cokeham, M and Tutesigensi, A (2013) An investigation of construction accidents in Rwanda: Perspectives from Kigali. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(4), pp. 179-187. ISSN 17514312

Cole-Colander, C (2003) Designing the customer experience. Building Research & Information, 31(5), pp. 357-366. ISSN 0961-3218

Coleman, E; Nooni, I K; Fianko, S K; Dadzie, L; Neequaye, E N; Owusu-Agyemang, J and Ansa-Asare, E O (2020) Assessing contract management as a strategic tool for achieving quality of work in Ghanaian construction industry: A case study of FPMU and MMDAS. Journal of Financial Management of Property and Construction, 25(1), pp. 41-60. ISSN 1366-4387

Connaughton, J N (1993) Making and implementing industrial building investment decisions. PhD thesis, University of Greenwich, UK.

Consoli, G G S (2004) Conducting an ethno-methodological study for the comparison of private and public prison delivery processes in Australia. Journal of Construction Procurement, 10(1),

Conway, Z; Wade, F and Smith, S D (2018) A participant observation study of gender dynamics on construction sites. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Cooper, T E (1994) A knowledge-based construction claims advisor for the A.I.A. A201 general conditions document. PhD thesis, Auburn University, USA.

Costantino, N; Pietroforte, R and Hamill, P (2001) Subcontracting in commercial and residential construction: An empirical investigation. Construction Management and Economics, 19(4), pp. 439-447. ISSN 01446193

Costin, G; Nakai Kidd, A; Simon, T and Edwards, D J (2019) Collaborative procurement and private-sector housebuilding and refurbishment works: A pilot study investigation of the UK. International Journal of Building Pathology and Adaptation, 37(5), pp. 699-717. ISSN 23984708

Coulter III, C (1968) A systems analysis of the corps of engineers approach to design and construction. PhD thesis, Texas A&M University, USA.

Cox, David George (2002) Construction professionals and management in English local government: A triangulated investigation. PhD thesis, Durham University, UK.

Cox, I D; Morris, J P; Rogerson, J H and Jared, G E (1999) A quantitative study of post contract award design changes in construction. Construction Management and Economics, 17(4), pp. 427-439. ISSN 01446193

Cox, R F; Issa, R R A and Koblegard, K (2005) Management's perception of key behavioral indicators for construction. Journal of Construction Engineering and Management, 131(3), pp. 368-376. ISSN 0733-9364

Crabtree, P J (2014) The optimisation of construction management higher education to promote professional competencies and professional capability. PhD thesis, Anglia Ruskin University, UK.

Craft, William James (2022) A decision-making framework for regenerative precinct development. PhD thesis, University of New South Wales, Australia.

Craig, N; Pilcher, N; Forster, A M and Kennedy, C (2023) Ethanol-driven building fungus colonisation: "Whisky black" in urban built environments. International Journal of Building Pathology and Adaptation, 41(1), pp. 238-257. ISSN 23984708

Crossley, B J (2015) Inter-organisational relationship trust repair: A ranked Delphi study with UK professionals. International Journal of Law in the Built Environment, 7(3), pp. 195-213. ISSN 1756-1450

Crowley, L G and Hancher, D E (1995) Evaluation of competitive bids. Journal of Construction Engineering and Management, 121(2), pp. 238-245. ISSN 0733-9364

Cunningham, K R (2006) An investigation of vocational choice among community college construction education students in the state of Pennsylvania. PhD thesis, Pennsylvania State University, USA.

Curran, M; Spillane, J P and Clarke-Hagan, D (2019) The considerate constructors scheme: Improving the image of construction, but how considerate are they to contractors? In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Cutrim, Sérgio Sampaio (2017) Port planning and governance in Brazil. PhD thesis, Universidade de São Paulo, Brazil.

Da Rocha, C G; Wijayaratna, K; Jong, K and Haller, D (2023) Examining off-site construction from a flow viewpoint. Journal of Construction Engineering and Management, 149(3): 05023001, ISSN 0733-9364

Dada, M O (2012) Predictors of procurement selection: An investigation of traditional and integrated methods in Nigeria. Journal of Construction in Developing Countries, 17(1), pp. 71-85. ISSN 1823-6499

Dadi, G B; Goodrum, P M; Taylor, T R B and Carswell, C M (2014) Cognitive workload demands using 2D and 3D spatial engineering information formats. Journal of Construction Engineering and Management, 140(5): 04014001, ISSN 0733-9364

Dainty, A R J; Bagilhole, B M and Neale, R H (2000) Computer aided analysis of qualitative data in construction management research. Building Research & Information, 28(4), pp. 226-233. ISSN 0961-3218

Dainty, A R J; Bryman, A; Price, A D F; Greasley, K; Soetanto, R and King, N (2005) Project affinity: The role of emotional attachment in construction projects. Construction Management and Economics, 23(3), pp. 241-244. ISSN 01446193

Dair, C M (2000) An evaluation of the UK regulatory system for the redevelopment of contaminated land. PhD thesis, University of Sussex, UK.

Dammann, S and Elle, M (2006) Environmental indicators: Establishing a common language for green building. Building Research & Information, 34(4), pp. 387-404. ISSN 0961-3218

Damoah, I S (2015) An investigation into the causes and effects of project failure in government projects in developing countries: Ghana as a case study. PhD thesis, Liverpool John Moores University, UK.

Dan-Asabe, D and Radosavljevic, M (2009) Do construction companies need to match employees' expectations? In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Dang, M E (2020) An investigation into the policies and initiatives for work-life balance within selected construction companies in Nigeria. PhD thesis, University of Northumbria at Newcastle, UK.

Daniel, E I (2017) Exploratory study into the use of Last Planner® System and collaborative planning for construction process improvement. PhD thesis, Nottingham Trent University, UK.

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2022) Overcoming the limitations of the green pyramid rating system in the Egyptian construction industry: A critical analysis. Architectural Engineering and Design Management, 18(2), pp. 114-127. ISSN 1745-2007

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2023) Analysis of factors affecting construction and demolition waste reduction in Egypt. International Journal of Construction Management, 23(8), pp. 1395-1404. ISSN 1562-3599

Darabseh, M Q M A (2024) Construction assets management using BIM and blockchain: Managing design assets intellectual property. PhD thesis, Universidade do Porto, Portugal.

Darlow, M J (1968) Investigations into line of balance scheduling house building. PhD thesis, Loughborough University, UK.

Darragh, A J R (2001) Patterns of injury among residential construction workers before and after a safety intervention program, 1994-1998. PhD thesis, Colorado State University, USA.

Dartevelle, O; van Moeseke, G; Masy, G; Mlecnik, E and Altomonte, S (2024) On the effectiveness of passive controls for summer thermal comfort in highly insulated dwellings. Building Research & Information, 52(3), pp. 311-331. ISSN 0961-3218

Dasandara, M; Ernst, R; Kulatunga, U and Rathnasiri, P (2022) Investigation of issues in structural flood management measures in Sri Lanka. Journal of Construction in Developing Countries, 27(1), pp. 65-78. ISSN 1823-6499

Dash, A (2021) Determinants of evs adoption: A study on green behavior of consumers. Smart and Sustainable Built Environment, 10(1), pp. 125-137. ISSN 2046-6099

Datta, S D; Rana, M J; Assafi, M N; Mim, N J and Ahmed, S (2023) Investigation on the generation of construction wastes in Bangladesh. International Journal of Construction Management, 23(13), pp. 2260-2269. ISSN 1562-3599

Davies, A J (1995) Towards a method of measurement and cost control for civil engineering work in the petrochemical industry. PhD thesis, University of Northumbria at Newcastle, UK.

Davila Delgado, J M and Oyedele, L O (2020) BIM data model requirements for asset monitoring and the circular economy. Journal of Engineering, Design and Technology, 18(5), pp. 1269-1285. ISSN 1726-0531

Davis, K A (2004) Information technology change in the architecture, engineering, and construction industry: An investigation of individuals' resistance. PhD thesis, Virginia Tech, USA.

Dawood, N N; Hobbs, B and Fanning, A (1999) Standardization of brickwork construction: Process identification. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Dawood, N N; Yasuhara, T; Usuda, Y; Matsuda, C and Sawada, A (2001) Analysis of cost escalation and risk assessment of infrastructure projects: An application in Japanese civil engineering projects. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Dawson, P J (1997) A hierarchical approach to the management of construction project risk. PhD thesis, University of Nottingham, UK.

De Haan, J; Voordijk, H and Joosten, G J (2002) Market strategies and core capabilities in the building industry. Construction Management and Economics, 20(2), pp. 109-118. ISSN 01446193

De Silva, D G (2002) Asymmetries in procurement auctions. PhD thesis, University of Oklahoma, USA.

De Venny, A S (1999) Recycling of demolished masonry rubble. PhD thesis, Edinburgh Napier University, UK.

Deakin, M (1998) Local Authority property management: A management exercise. Journal of Financial Management of Property and Construction, 3(1), pp. 43-72. ISSN 1366-4387

Delgado-Arvelo, Y (2012) An investigation into the data collection process for the development of cost models. PhD thesis, De Montfort University, UK.

Delgado-Hernández, D J and Palacios-Navarro, U J (2024) A Bayesian network for selecting improvement management tools to increase customer satisfaction in the construction industry: Case study of Mexico. Engineering, Construction and Architectural Management, 31(7), pp. 2900-2915. ISSN 0969-9988

Deng, F (2015) Performance measurement system: attributes, effects and context in UK construction firms. PhD thesis, University College London, UK.

Deng, Zhong Ming (1995) Extended state space modelling and influence diagrams for construction processes and aids. PhD thesis, University of New South Wales, Australia.

Denham, T; Rickards, L and Ajulo, O (2024) The jobs of climate adaptation. Buildings & Cities, 5(1), pp. 283-299. ISSN 2632-6655

Devapriya, K A K and Khu, F L (2004) Bond financing in private infrastructure projects in developing countries. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Devkar, G A and Kalidindi, S N (2013) External agencies for supplementing competencies in Indian urban PPP projects. Built Environment Project and Asset Management, 3(1), pp. 58-73. ISSN 2044-124X

Dewulf, G and Garvin, M J (2020) Responsive governance in PPP projects to manage uncertainty. Construction Management and Economics, 38(4), pp. 383-397. ISSN 01446193

Dias Barkokebas, R; Al-Hussein, M and Li, X (2022) VR-MOCAP-enabled ergonomic risk assessment of workstation prototypes in offsite construction. Journal of Construction Engineering and Management, 148(8): 04022064, ISSN 0733-9364

Dias Barkokebas, R and Li, X (2021) Use of virtual reality to assess the ergonomic risk of industrialized construction tasks. Journal of Construction Engineering and Management, 147(3): 04020183, ISSN 0733-9364

Dickens, G (2002) Teamworking, perceptions and communication within construction projects. PhD thesis, University of Nottingham, UK.

Didla, N R (2018) Evaluation of the impact of quality risk management on quality performance in the UAE construction projects. PhD thesis, Heriot-Watt University, UK.

Dikmen, I; Birgonul, M T and Kiziltas, S (2005) Prediction of organizational effectiveness in construction companies. Journal of Construction Engineering and Management, 131(2), pp. 252-261. ISSN 0733-9364

Din, Z U (2017) Teaching prevention through design (PTD) principles using a non-traditional pedagogical strategy. PhD thesis, Arizona State University, USA.

Ding, S; Hu, H; Dai, L and Wang, W (2023) Blockchain adoption among multi-stakeholders under government subsidy: From the technology diffusion perspective. Journal of Construction Engineering and Management, 149(5): 04023016, ISSN 0733-9364

Djebarni, R (1996) The impact of stress in site management effectiveness. Construction Management and Economics, 14(4), pp. 281-293. ISSN 01446193

Doğan, S Z (2005) Using machine learning techniques for early cost prediction of structural systems of buildings. PhD thesis, Izmir Institute of Technology, Turkey.

Doloi, H (2009) Analysis of pre-qualification criteria in contractor selection and their impacts on project success. Construction Management and Economics, 27(12), pp. 1245-1263. ISSN 1466433X

Doloi, H (2013) Cost overruns and failure in project management: Understanding the roles of key stakeholders in construction projects. Journal of Construction Engineering and Management, 139(3), pp. 267-279. ISSN 0733-9364

Dong, R G; Pan, C S and Wu, J Z (2025) Safety design, use, and research of mast climbing work platforms. Journal of Construction Engineering and Management, 151(12): 03125009, ISSN 0733-9364

Donyavi, S and Flanagan, R (2009) The impact of effective material management on construction site performance for small and medium sized construction enterprises. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Dorrah, D H (2024) Development of integrated decision support framework for payment management and negotiation in construction projects. PhD thesis, University of Toronto, Canada.

Dorward, D R (2006) The effect of selected output modifications on facilitating the assessment of PDM schedules. PhD thesis, Indiana State University, USA.

Dorée, A G (2004) Collusion in the Dutch construction industry: An industrial organization perspective. Building Research & Information, 32(2), pp. 146-156. ISSN 0961-3218

Douglas, J C (1994) Aesthetic-based conflict in highway planning: Federal highway administration putting planners at risk. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Dow, I; Ross, A D and Sertyesilisik, B (2009) An investigation on the cost implications of methodology of subcontract work pricing. Journal of Financial Management of Property and Construction, 14(2), pp. 98-125. ISSN 1366-4387

Dow, I; Ross, A D and Sertyesilisik, B (2009) An investigation on the cost implications of methodology of subcontract work pricing. Journal of Financial Management of Property and Construction, 14(2), pp. 98-125. ISSN 1366-4387

Dowd, V G (1999) The pervading role of risk allocation as the link mechanism between factors of influence and construction procurement practices adopted in the UK construction industry over the period 1965-1995. PhD thesis, Nottingham Trent University, UK.

Doyle, M G (1994) Postgraduate education for European construction management. PhD thesis, Trinity College Dublin, Ireland.

Dreschler, M (2009) Fair competition: How to apply the 'economically most advantageous tender' award mechanism in the Dutch construction industry. PhD thesis, Delft University of Technology, Netherlands.

Du, X.; Liu, J.; Chen, Y. and Wang, Z. (2026) Millennial executives: Effects of the age-inverse relationship in ceo-top management team on corporate misconduct in China's construction industry. Engineering, Construction and Architectural Management, 33(3), pp. 2448-2470. ISSN 0969-9988

Du, J (2012) Investigation of interpersonal cooperation in construction project teams: An agent-based modeling approach. PhD thesis, Michigan State University, USA.

Du, J; El-Gafy, M and Zhao, D (2016) Optimization of change order management process with object-oriented discrete event simulation: Case study. Journal of Construction Engineering and Management, 142(4): 05015018, ISSN 0733-9364

Du, J; Zhao, D and Zhang, O (2019) Impacts of human communication network topology on group optimism bias in capital project planning: A human-subject experiment. Construction Management and Economics, 37(1), pp. 44-60. ISSN 01446193

Dudhee, V and Vukovic, V (2023) Building information model visualisation in augmented reality. Smart and Sustainable Built Environment, 12(4), pp. 919-934. ISSN 2046-6099

Duff, A R; Emsley, M; Gregory, M; Lowe, D and Masterman, J (1998) Development of a model of total building procurement costs for construction clients. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Dulaimi, M F (1991) Job behaviour of site managers: Its determinants and assessment. PhD thesis, University of Bath, UK.

Dulaimi, M F and Langford, D (1999) Job behavior of construction project managers: Determinants and assessment. Journal of Construction Engineering and Management, 125(4), pp. 256-264. ISSN 0733-9364

Dumrak, J; Mostafa, S; Kamardeen, I and Rameezdeen, R (2013) Factors associated with the severity of construction accidents: The case of South Australia. Construction Economics and Building, 13(4), pp. 32-49. ISSN 2204-9029

Duncan, R I and Mortimer, J (2007) Race equality and procurement: An investigation into the impact of race equality policy on the procurement of black and minority ethnic (BME) contractors and consultants in the welsh social housing sector. Construction Management and Economics, 25(12), pp. 1283-1293. ISSN 1466433X

Dundu, M (2014) Effect of defects on the strength of welds. Journal of Engineering, Design and Technology, 12(4), pp. 410-422.

Dunlop, P and Smith, S (2000) Stochastic modelling of concrete operations. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Dunlop, P G (2005) Investigation, modelling and planning of stochastic concrete placing operations. PhD thesis, University of Edinburgh, UK.

Dunne, K O (2006) Effective leadership in the multi-faceted client organisation: A case study on the Olympic client coalition. PhD thesis, University College London, UK.

Dunston, P S; Savage, B M and Mannering, F L (2000) Weekend closure for construction of asphalt overlay on urban highway. Journal of Construction Engineering and Management, 126(4), pp. 313-315. ISSN 0733-9364

Dursun, O and Stoy, C (2016) Conceptual estimation of construction costs using the multistep ahead approach. Journal of Construction Engineering and Management, 142(9): 04016038, ISSN 0733-9364

Dutra, Clezio Thadeu de Souza (2016) Sustainable public bidding for engineering works and services. PhD thesis, Universidade Federal Fluminense, Brazil.

Dutta, A (2020) An in-depth investigation of the effects of work-related factors on the development of knee musculoskeletal disorders among construction roofers. PhD thesis, West Virginia University, USA.

Duvel, C S (1999) Establishing rule-based models to implement workflow within construction organizations. PhD thesis, University of Florida, USA.

Duzkale, A K (2013) Reducing uncertainty in bid preparation phase of cost estimating for structural steel. PhD thesis, Catholic University of America, USA.

Dzokoto, F K; Edum-Fotwe, F and Demian, P (2014) Conceptualising actors' information behaviour: An investigation into project information dynamics. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Eadie, R; Millar, P and Grant, R (2013) PFI/PPP, private sector perspectives of UK transport and healthcare. Built Environment Project and Asset Management, 3(1), pp. 89-104. ISSN 2044-124X

Easa, S M (1988) Earthwork allocations with linear unit costs. Journal of Construction Engineering and Management, 114(4), pp. 641-655. ISSN 0733-9364

Ebekozien, A; Abdul-Aziz, A R and Jaafar, M (2023) Mitigating high development cost of low-cost housing: Findings from an empirical investigation. International Journal of Construction Management, 23(3), pp. 472-483. ISSN 1562-3599

Eccles, T S (2009) The English building industry in late modernity: an empirical investigation of the definition, construction and meaning of profession. PhD thesis, London School of Economics and Political Science, UK.

Edirisinghe, R; Jayasuriya, S; Almulla, J; Abobakr, M; Bastos Costa, D; Alberte, E; Hastak, M and Tzortzopoulos, P (2025) Gender diversity in construction: Demystifying the pipeline leaks in Australia, United States, United Kingdom and Brazil. International Journal of Construction Management, 25(9), pp. 1100-1114. ISSN 1562-3599

Edirisinghe, R; London, K A; Kalutara, P and Aranda-Mena, G (2017) Building information modelling for facility management: Are we there yet? Engineering, Construction and Architectural Management, 24(6), pp. 1119-1154. ISSN 0969-9988

Edmondson, V C (1996) After entry, then what? An examination of the strategy and performance of minority-owned ventures in the United States construction industry. PhD thesis, University of Georgia, USA.

Edwards, D J (2003) Accident trends involving construction plant: an exploratory analysis. Journal of Construction Research, 4(2), pp. 161-173. ISSN 1609-9451

Edwards, D J; Martek, I; Ejohwomu, O; Aigbavboa, C and Hosseini, M R (2021) Hand-arm vibration management: An operational health and safety strategy framework. International Journal of Building Pathology and Adaptation, 39(5), pp. 811-830. ISSN 23984708

Edwards, P J and Bowen, P A (1998) Risk and risk management in construction: A review and future directions for research. Engineering, Construction and Architectural Management, 5(4), pp. 339-349. ISSN 0969-9988

Egbelakin, T; Omotayo, T; Ogunmakinde, O E and Ekundayo, D (2025) Eliciting social themes of flood mitigation and community engagement studies through text mining. International Journal of Building Pathology and Adaptation, 43(1), pp. 29-49. ISSN 2398-4708

Egbu, C O and Bernard, P (2000) Organizational core competencies and their influence on strategic partnering in registered social landlords (rsls). In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Egbu, C O; Gaskell, C and Howes, J (2001) The role of organizational culture and motivation in the effective utilization of information technology for teamworking in construction. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Eilers, H I (2015) Impact of sustainable business practices on strategic performance for commercial building contractors. PhD thesis, University of Kansas, USA.

Eiris, R; Jain, E; Gheisari, M and Wehle, A (2021) Online hazard recognition training: Comparative case study of static images, cinemagraphs, and videos. Journal of Construction Engineering and Management, 147(8): 04021082, ISSN 0733-9364

Eissa, R; Eid, M S and Elbeltagi, E (2021) Current applications of game theory in construction engineering and management research: A social network analysis approach. Journal of Construction Engineering and Management, 147(7): 0002085, ISSN 0733-9364

Ejohwomu, O A; Proverbs, D G and Olomolaiye, P (2005) A conceptual demand led model founded on theories of labour market mismatch for the construction and building services industry. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Ejohwomu, O A; Proverbs, D G and Olomolaiye, P (2008) The impact of multiskilling on UK's construction manpower. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 161(1), pp. 25-30. ISSN 17514312

Eken, T Y; Sarioglu, C and Kucuk, I (2021) Corrosion behaviour of twin-roll cast 8006 aluminium alloy foil with different thicknesses for the food packaging industry. Journal of Engineering, Design and Technology, 19(6), pp. 1421-1432. ISSN 1726-0531

Ekenel, M (2004) Durability performance of advanced construction materials. PhD thesis, University of Missouri - Rolla, USA.

Ekundayo, D O (2020) Quantity surveying education and the benchmarking of future needs. PhD thesis, University of Salford, UK.

El Korany, T. M.; Fouad, A. and Sanad, H. (2026) Identifying contractor selection criteria in Egyptian construction tenders: A SNA and PLS-SEM approach. Construction Innovation, 26(5), pp. 1356-1383. ISSN 1471-4175

El-Choum, M K (1994) Identification and modelling of construction cost overruns parameters for public infrastructure projects using multivariate statistical methods. PhD thesis, Stevens Institute of Technology, USA.

El-Deeb, K (2024) Energy performance assessment of venetian blinds in south-oriented residential spaces in hot arid desert climates. Construction Innovation, 24(6), pp. 1460-1482. ISSN 1471-4175

El-Hasia, A M (2005) The effects of state's construction procurement policy implementation on the outcome of local construction projects: the Libyan case. PhD thesis, University of Salford, UK.

El-Kelesh, A M; Heniegal, A M and Arnaout, M M (2025) Relative impact of factors affecting penetration rate of horizontal directional drilling. International Journal of Construction Management, 25(13), pp. 1501-1515. ISSN 1562-3599

El-Razek, M E A; Bassioni, H and El-Salam, W A (2007) Investigation into the causes of claims in Egyptian building construction. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

El-Saboni, M A (2011) Interaction between electronic communication and perceived success in UAE construction projects. PhD thesis, University of Salford, UK.

El-Samadony, A A E-Y (1986) Development of an improved construction bidding model incorporating multiple objective functions. PhD thesis, University of Leeds, UK.

Eldin, N N (1987) Methodology for project management control in the construction industry. PhD thesis, Oklahoma State University, USA.

Eldin, N N and Senouci, A B (1992) Use of scrap tires in road construction. Journal of Construction Engineering and Management, 118(3), pp. 561-576. ISSN 0733-9364

Elhegazy, H; Ebid, A; Mahdi, I; Haggag, S and Abdul-Rashied, I (2021) Implementing QFD in decision making for selecting the optimal structural system for buildings. Construction Innovation, 21(2), pp. 345-360. ISSN 1471-4175

Elias, I; Felix, H; David, P and David, O (2011) Improving construction health and safety: Application of cost-benefit analysis (CBA) for accident prevention. International Journal of Construction Management, 11(1), pp. 19-35. ISSN 1562-3599

Elkadi, Karim (2024) BIM-enabled facility management framework and simulation. PhD thesis, George Mason University, USA.

Elliott, B R (2000) Investigation of the construction scheduling communication process: Problems, foreman's role, means of improvement and use of information technology. PhD thesis, University of Florida, USA.

Elsayah, O S (2016) A framework for improvement of contractor selection procedures on major construction project in Libya. PhD thesis, Edinburgh Napier University, UK.

Elsayegh, A and El-Adaway, I H (2021) Holistic study and analysis of factors affecting collaborative planning in construction. Journal of Construction Engineering and Management, 147(4): 04021023, ISSN 0733-9364

Eltigani, Hadi Mohammed Ahmed (1995) An investigation into the impact of quality management systems upon construction productivity at the site level. PhD thesis, University of Strathclyde, UK.

Emmitt, S (2006) Selection and specification of building products: Implications for design managers. Architectural Engineering and Design Management, 2(3), pp. 176-186. ISSN 1745-2007

Emmitt, S; Pasquire, C and Mertia, B (2012) Is good enough "making do"? An investigation of inappropriate processing in a small design and build company. Construction Innovation, 12(3), pp. 369-383. ISSN 1471-4175

Emsoff, J E (1994) An object-oriented environment for the visual integration of project scheduling data. PhD thesis, Texas A&M University, USA.

Emuze, F A and Smallwood, J J (2013) Reducing 'non-value-adding activities' when building infrastructure in South Africa. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(3), pp. 121-127. ISSN 17514312

Endut, I R (2008) Framework for minimising time overruns of Malaysian construction projects. PhD thesis, Glasgow Caledonian University, UK.

Enshassi, A; Ayash, A and Mohamed, S (2018) Factors driving contractors to implement energy management strategies in construction projects. Journal of Financial Management of Property and Construction, 23(3), pp. 295-311. ISSN 1366-4387

Enshassi, A; Mohamed, S and El-Ghandour, S (2009) Problems associated with the process of claim management in Palestine: Contractors' perspective. Engineering, Construction and Architectural Management, 16(1), pp. 61-72. ISSN 0969-9988

Erfani, A; Ma, Z; Cui, Q and Baecher, G B (2023) Ex post project risk assessment: Method and empirical study. Journal of Construction Engineering and Management, 149(2): 04022174, ISSN 0733-9364

Eriksson, P E; Olander, S; Szentes, H and Widén, K (2014) Managing short-term efficiency and long-term development through industrialized construction. Construction Management and Economics, 32(1-2), pp. 97-108. ISSN 01446193

Escamilla, E (2011) Investigation of project management planning practices for renovation of historical buildings in urban contexts located in Texas. PhD thesis, Texas A&M University, USA.

Evans, M (2013) An investigation into occupants' satisfaction in UK sustainable social housing. PhD thesis, University of the West of England, Bristol, UK.

Fadhil Dulaimi, M (2005) The challenge of customer orientation in the construction industry. Construction Innovation, 5(1), pp. 3-12. ISSN 1471-4175

Fageha, M K and Aibinu, A A (2014) Prioritising project scope definition elements in public building projects. Construction Economics and Building, 14(3), pp. 18-33. ISSN 2204-9029

Fahid, S (2007) An investigation of the effectiveness of total quality management in the UK construction industry: An empirical study. PhD thesis, Heriot-Watt University, UK.

Fahy, P (2007) Cross cultural training and the effective integration of the construction supply chain. PhD thesis, University College London, UK.

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Faisol, N (2010) An investigation of relational contracting norms in construction projects in Malaysia. PhD thesis, Loughborough University, UK.

Faisol, N; Dainty, A R J and Price, A D F (2006) Perceptions of construction organisations on developing successful inter-organisational relationships. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Fan, S (2009) The effect of using group decision support systems on the processes and outcomes of value management studies. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Fang, D; Fong, P S W and Li, M (2004) Risk assessment model of tendering for Chinese building projects. Journal of Construction Engineering and Management, 130(6), pp. 862-868. ISSN 0733-9364

Fang, D; Li, M; Fong, P S W and Shen, L (2004) Risks in Chinese construction market: contractors' perspective. Journal of Construction Engineering and Management, 130(6), pp. 853-861. ISSN 0733-9364

Fapohunda, J A and Chileshe, N (2014) Essential factors towards optimal utilisation of construction resources. Journal of Engineering, Design and Technology, 12(4), pp. 461-474.

Faqih, F; Zayed, T and Alfalah, G (2022) Technology-based multi-tiered building diagnosis framework. International Journal of Building Pathology and Adaptation, 40(1), pp. 101-133. ISSN 23984708

Farag, F (2018) Understanding social value creation in public construction projects using systems thinking. PhD thesis, University of Salford, UK.

Faraji, A (2021) Neuro-fuzzy system based model for prediction of project performance in downstream sector of petroleum industry in Iran. Journal of Engineering, Design and Technology, 19(6), pp. 1268-1290. ISSN 1726-0531

Farrell, P (1999) Construction site managers: an investigation into the career development and role of site managers on medium-sized construction projects. PhD thesis, University of Manchester Institute of Science and Technology, UK.

Fatayer, F A; Hassanain, M A; Abdallah, A and Al-Hammad, A M (2019) Investigation of facilities management practices for providing feedback during the design development and review stages. International Journal of Building Pathology and Adaptation, 37(5), pp. 597-614. ISSN 23984708

Fawzy, O N (1991) The development of the architectural working drawing from the descriptive to the prescriptive: A study in architectural communication. PhD thesis, University of Pennsylvania, USA.

Felix, R (1988) The use of domestic building products by the owner-builder. PhD thesis, University of Leeds, UK.

Fellows, R (2010) New research paradigms in the built environment. Construction Innovation, 10(1), pp. 5-13. ISSN 1471-4175

Fellows, R; Liu, A and Storey, C (2009) Values, power and performance on construction projects: A preliminary investigation. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Feng, Jiajing; Nikolić, Dragana and Ewart, Ian (2023) Understanding how building is adapted under changing scenarios from a user' perspective. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Feng, L and Moodley, K (2008) Determinants of local responsiveness of fmncs in mainland China. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Feng, Z; Chao, Q; Tan, C and Yang, Y (2023) Using bargaining model with loss aversion and a risk of breakdown to determine compensation for buyback of early terminating BOT highway projects. Journal of Construction Engineering and Management, 149(5): 04023024, ISSN 0733-9364

Fergusson, H and Langford, D A (2006) Strategies for managing environmental issues in construction organizations. Engineering, Construction and Architectural Management, 13(2), pp. 171-185. ISSN 0969-9988

Fernando, M H V; Costa, D D; Malsha Nadeetharu, B K and Kulatunga, U (2024) Application of lean principles for building refurbishment projects in Sri Lanka. Built Environment Project and Asset Management, 14(2), pp. 244-259. ISSN 2044-124X

Few, J and Elwell, C A (2023) Applying the CO2 concentration decay tracer gas method in long-term monitoring campaigns in occupied homes: Identifying appropriate unoccupied periods and decay periods. International Journal of Building Pathology and Adaptation, 41(1), pp. 96-108. ISSN 23984708

Few, J; Shipworth, M and Elwell, C (2024) Ventilation regulations and occupant practices: Undetectable pollution and invisible extraction. Buildings & Cities, 5(1), pp. 16-34. ISSN 2632-6655

Fialho, Beatriz Campos (2021) Design for smart maintenance enabled by BIM and IoT. PhD thesis, Universidade de São Paulo, Brazil.

Fiorineschi, L (2018) Abstraction framework to support students in learning creative conceptual design. Journal of Engineering, Design and Technology, 16(4), pp. 616-636. ISSN 1726-0531

Fiorineschi, L; Bacci, T; Frillici, F S S; Cubeda, S; Volpe, Y; Rotini, F; Carfagni, M and Facchini, B (2023) Non-reactive test rig for combustor-turbine interaction studies in industrial gas turbines. Journal of Engineering, Design and Technology, 21(3), pp. 758-777. ISSN 1726-0531

Fireman, M C T; Saurin, T A; Formoso, C T; Koskela, L and Tommelein, I D (2023) Slack in production planning and control: A study in the construction industry. Construction Management and Economics, 41(3), pp. 256-276. ISSN 01446193

Fisher, W H (2017) The use of arbitration in the construction industry in England and Wales: an evaluation of its continuing role following the Arbitration Act 1996. PhD thesis, University of Wolverhampton, UK.

Fitch, G J (2019) System dynamics models for the valuation of real options in infrastructure investments. PhD thesis, Columbia University, USA.

Fitriani, H and Ajayi, S (2023) Investigation of requisite measures for enhancing sustainable construction practices in Indonesia. Engineering, Construction and Architectural Management, 30(6), pp. 2602-2620. ISSN 0969-9988

Fletcher, S L (2001) Developing disassembly strategies for buildings to reduce the lifetime environmental impacts by applying a systems approach. PhD thesis, University of Sheffield, UK.

Fletcher, S M; Gunning, J G and Coates, R (2014) Soft skills of senior contracts managers in Northern Ireland. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 167(1), pp. 35-45. ISSN 17514304

Flynn, C (2020) Risk transfer in operational public private partnerships in the education sector. PhD thesis, Queen's University Belfast, UK.

Forbes, Lincoln Harding (1999) An engineering management-based investigation of owner satisfaction, quality and performance variables in health care facilities construction. PhD thesis, University of Miami, USA.

Forman, M (2013) Inertia and change: Lean construction and health and safety work on construction sites. Construction Management and Economics, 31(6), pp. 647-660. ISSN 1466433X

Fortea, S M E (1989) An investigation of appropriateness relative to indigenous and modern housing in Libya. PhD thesis, Heriot-Watt University, UK.

Fortune, C (2001) Exploring the model selection process in the formulation of building project advice. Journal of Financial Management of Property and Construction, 6(3), pp. 167-177. ISSN 1366-4387

Fortune, C and Birnie, J (2000) Money illusions and the judgements of professional quanitity surveyors. Journal of Financial Management of Property and Construction, 5(1-2), pp. 41-50. ISSN 1366-4387

Fortune, C J (1999) Factors affecting the selection of building project price forecasting tools. PhD thesis, Heriot-Watt University, UK.

Fox, D S J (1994) Knowledge-based systems for the demolition industry. PhD thesis, University of Portsmouth, UK.

Frame, S M (1969) A descriptive study of the relationship of an economic index and school construction bid economy in fourteen Southern California counties. EdD thesis, New Mexico State University, USA.

Franceys, R W A (1991) Infrastructure for low-income communities: An investigation into the provision of sustainable physical infrastructure for low-income communities in low-income countries. PhD thesis, Loughborough University, UK.

Francis, Valerie Elizabeth (2013) Women and their career progression in the Australian construction industry. PhD thesis, University of Melbourne, Australia.

Freitas, F and Mendes, J M (2019) Disaster, reconstruction, and data for social good: The case of wildfires in Portugal. International Journal of Disaster Resilience in the Built Environment, 10(4), pp. 239-247. ISSN 1759-5916

Fujino, T (1994) The development of a method for investigating construction site accidents using fuzzy fault tree analysis. PhD thesis, Ohio State University, USA.

Furber, A M (2013) Social and cultural context of rural water and sanitation projects: Case studies from Ghana. PhD thesis, University of Edinburgh, UK.

Gaafar, H K (1997) Risk allocations in standard forms of engineering and construction contract. PhD thesis, University of Birmingham, UK.

Gade, A N; Larsen, T S and Selman, A D (2021) Leaving no one behind: A glimpse into the state of adoption of the Sustainable Development Goals in the Danish construction industry. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Gage, S A and Graham, J M R (2000) Static split duct roof ventilators. Building Research & Information, 28(4), pp. 234-244. ISSN 0961-3218

Gai, X (2012) Fibre reinforced polymer (FRP) stay-in-place (SIP) participating formwork for new construction. PhD thesis, University of Bath, UK.

Gaitskell, R (1999) The IMechE/IEE model forms of contract: an investigation into the history and development of the forms, with particular reference to the allocation of contractual risk, including a survey of the industry's perception (BL). PhD thesis, King's College London, UK.

Gajendran, T; Brewer, G; Runeson, G and Dainty, A (2011) Investigating informality in construction: Philosophy, paradigm and practice. Construction Economics and Building, 11(2), pp. 84-98. ISSN 2204-9029

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Galbraith, G H; McLean, R C; Gillespie, I; Guo, J and Kelly, D (1998) Nonisothermal moisture diffusion in porous building materials. Building Research & Information, 26(6), pp. 330-339. ISSN 0961-3218

Galbraith, G H; McLean, R C and Kelly, D (1997) Moisture permeability measurements under varying barometric pressure. Building Research & Information, 25(6), pp. 348-353. ISSN 0961-3218

Gale, A W (1994) Women in construction: An investigation into some of the aspects of image and knowledge as determinants of the under representation of women in construction management in the British construction industry. PhD thesis, University of Bath, UK.

Galotti, V (2025) An exploration of design-build risk and project profitability in the architecture, engineering and construction sector. PhD thesis, University of Colorado at Boulder, USA.

Gamage, I S W; Osmani, M and Glass, J (2009) An investigation into the impact of procurement systems on waste generation: The contractors' perspective. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Gamal, A; Nashaat, B; Shahda, M M and Nosier, S R (2024) Ten questions concerning the integration of digital fabrication techniques into the architectural design process. Architectural Engineering and Design Management, 20(1), pp. 120-149. ISSN 1745-2007

Gameson, R (1992) An investigation into the interaction between potential building clients and construction professionals. PhD thesis, University of Reading, UK.

Gameson, R and Sher, W (2002) An investigation into project team dynamics and the utilization of virtual environments. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Gameson, R and Sher, W (2009) An investigation into perceptions of client- professional interactions at project inception: An australian clients perspective: Pilot study results. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Gameson, R; Suresh, S and Chinyio, E (2008) Project debriefing: A multi-domain review of practices and procedures. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gamil, Y and Abdul Rahman, I (2019) Awareness and challenges of building information modelling (BIM) implementation in the Yemen construction industry. Journal of Engineering, Design and Technology, 17(5), pp. 1077-1084. ISSN 1726-0531

Gamil, Y and Abdul Rahman, I (2020) Assessment of critical factors contributing to construction failure in Yemen. International Journal of Construction Management, 20(5), pp. 429-436. ISSN 1562-3599

Ganah, A A M (2003) Computer visualisation support for buildability. PhD thesis, Loughborough University, UK.

Ganapathy, G P and Haupt, T C (2024) Engineering properties of SBS and crumb-rubber modified bitumen: a design of experiment approach. Journal of Engineering, Design and Technology, 22(6), pp. 1742-1754. ISSN 1726-0531

Gangatheepan, S (2023) Workplace-based learning: a study in BIM-enabled construction projects. PhD thesis, Birmingham City University, UK.

Gangrade, R (2021) Quantifying spatial geotechnical uncertainty to advance the practice of risk assessment and decision-making for tunnel projects. PhD thesis, Colorado School of Mines, USA.

Gao, S (2013) The toyota way model: An implementation framework for large Chinese construction firms. PhD thesis, National University of Singapore, Singapore.

Gao, Z (2004) Investigation of technologies to improve the visualization of design documents and construction process. PhD thesis, Iowa State University, USA.

Gardiner, P D (1993) Conflict analysis in construction project management. PhD thesis, Durham University, UK.

Gardiner, P D and Simmons, J E L (1992) Analysis of conflict and change in construction projects. Construction Management and Economics, 10(6), pp. 459-478. ISSN 01446193

Garg, H C (2012) Theoretical modeling of orifice compensated symmetric hole-entry hybrid journal bearings. Journal of Engineering, Design and Technology, 10(3), pp. 421-435. ISSN 1726-0531

Garnett, N A (2001) Changing construction performance using lean construction: An action research approach. PhD thesis, University of Reading, UK.

Garrett, J W and Teizer, J (2009) Human factors analysis classification system relating to human error awareness taxonomy in construction safety. Journal of Construction Engineering and Management, 135(8), pp. 754-763. ISSN 0733-9364

Garthwaite, P M and Eckert, C M (2012) Glitches, snags and crises: A study of change in two hospital adaptation projects. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Gasparin, M (2014) Management of design as a translation process. PhD thesis, University of Leicester, UK.

Gasue, R; Aklashie, S; Dompey, A M A; Agyekum, K and Opoku, D (2026) Implementing materials passports in the construction industry: Empirical evidence from Ghana. International Journal of Building Pathology and Adaptation, 44(1), pp. 15-35. ISSN 2398-4708

Gatley, D (2004) A critical examination of building contracts in New Zealand: an investigation into the types of building contracts employed ; their formation and administration ; and into the incidence, nature and resolution of disputes resulting from their usage ; in the commercial and residential sectors of the construction industry in New Zealand. PhD thesis, RMIT University, Australia.

Gatti, U C; Migliaccio, G C; Bogus, S M and Schneider, S (2014) An exploratory study of the relationship between construction workforce physical strain and task level productivity. Construction Management and Economics, 32(6), pp. 548-564. ISSN 01446193

Gehrig, G B (1985) Organizational practices and theories: Alignment of construction executive's beliefs with company policies. PhD thesis, Colorado State University, USA.

George, M and Sekpe, V (2010) Inspection of insulated concrete form walls using ground penetrating radar. International Journal of Construction Education and Research, 6(4), pp. 303-317. ISSN 1557-8771

George, T H (1994) A model of vocational, technical and apprenticeship craft training required to meet the needs of the construction industry in Florida. PhD thesis, University of Florida, USA.

Georgiou, A; Haritos, G; Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(1), pp. 115-133.

Gerges, M; Mayouf, M; Rumley, P and Moore, D (2017) Human behaviour under fire situations in high-rise residential building. International Journal of Building Pathology and Adaptation, 35(1), pp. 90-106.

Gessford, G N (1966) An investigation of the utility of critical path time and cost analysis as an aid to budgeting and administrative control by construction firms. PhD thesis, University of California, Los Angeles, USA.

Ghadamsi, A (2016) Investigating the influence of procurement method selection on project performance in Libya. PhD thesis, Brunel University, UK.

Ghadar, K O (2017) An examination of PERT implementation in the Libyan construction industry. PhD thesis, Cardiff Metropolitan University, UK.

Ghanbari, A (2006) Model-based integrated total project management systems, with an emphasis on materials management. PhD thesis, University of British Columbia, Canada.

Ghanbari Parsa, A R (1989) The interaction of planning policies and construction technologies in Iran with reference to China & Japan. PhD thesis, University of Newcastle upon Tyne, UK.

Ghanbaripour, A. N.; Sher, W. and Yousefi, A. (2020) Critical success factors for subway construction projects–main contractors' perspectives. International Journal of Construction Management, 20(3), pp. 177-195. ISSN 1562-3599

Ghanbaripour, A N; Sher, W and Yousefi, A (2020) Critical success factors for subway construction projects: main contractors' perspectives. International Journal of Construction Management, 20(3), pp. 177-195. ISSN 1562-3599

Gharaie, Ehsan (2011) House completion time in Australia: Workflow planning approach. PhD thesis, RMIT University, Australia.

Gharouni Jafari, K and Noorzai, E (2021) Selecting the most appropriate project manager to improve the performance of the occupational groups in road construction projects in warm regions. Journal of Construction Engineering and Management, 147(10): 04021131, ISSN 0733-9364

Ghattas, R T (2018) Stakeholder perceptions of how to diminish cost overruns in large, United States government-financed construction projects under earned value management: A multiple case study. DBA thesis, Northcentral University, USA.

Ghavidel, A (2025) AI-informed multi-threat decision-support methodology for long-term bridge asset management. PhD thesis, University of Texas at San Antonio, USA.

Ghazi Wakili, K; Bundi, R and Binder, B (2004) Effective thermal conductivity of vacuum insulation panels. Building Research & Information, 32(4), pp. 293-299. ISSN 0961-3218

Ghomi, S G; Wedawatta, G; Ginige, K and Ingirige, B (2021) Living-transforming disaster relief shelter: A conceptual approach for sustainable post-disaster housing. Built Environment Project and Asset Management, 11(4), pp. 687-704. ISSN 2044-124X

Ghosh, S; Nourihemadani, M and Reyes, M (2025) Effect of previous accidents and near-miss incidents on risk perceptions of construction workers. International Journal of Construction Education and Research, 21(2), pp. 213-229. ISSN 1557-8771

Gibson, G E; Kaczmarowski, J H and Lore, H E (1995) Preproject-planning process for capital facilities. Journal of Construction Engineering and Management, 121(3), pp. 312-318. ISSN 0733-9364

Gilbert, Guinevere (2011) A sequential exploratory mixed methods evaluation of graduate training and development in the construction industry. PhD thesis, RMIT University, Australia.

Giles, C; Irizarry, J and Gheisari, M (2010) Does gender make a difference? An analysis of motivational factors in sustainability practice. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gilmour, D; Simpson, E; Blackwood, D; McCallum, C and Logan, G (2016) Vocational training and knowledge development: A deeper understanding. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Ginige, K N (2014) Mainstreaming women in disaster risk reduction in the built environment. PhD thesis, University of Salford, UK.

Giri, O P; Sainju, P R and Htet, A (2025) Evaluating occupational health and safety practices in an airport construction project in Nepal. Built Environment Project and Asset Management, 15(1), pp. 149-164. ISSN 2044-124X

Giron Matute, W A (2018) Sustainability analysis for construction companies under the LEED code. PhD thesis, University of Alabama, USA.

Gispert, D E; Yitmen, I; Sadri, H and Taheri, A (2025) Development of an ontology-based asset information model for predictive maintenance in building facilities. Smart and Sustainable Built Environment, 14(3), pp. 740-757. ISSN 2046-6099

Gkiourka, P (2011) Managing innovation in the construction industry. PhD thesis, University of Leeds, UK.

Gkritza, K and Labi, S (2008) Estimating cost discrepancies in highway contracts: Multistep econometric approach. Journal of Construction Engineering and Management, 134(12), pp. 953-962. ISSN 0733-9364

Glagola, C R (1993) A model of current quality performance measurements for industrial construction. PhD thesis, Clemson University, USA.

Gledson, B; Hilton, D and Rogage, K (2016) Benchmarking BIM levels of training and education amongst construction management practitioners. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Gledson, B J and Greenwood, D (2017) The adoption of 4D BIM in the UK construction industry: An innovation diffusion approach. Engineering, Construction and Architectural Management, 24(6), pp. 950-967. ISSN 0969-9988

Glendinning, M (1991) 'Give the people homes!': Britain's multi-storey housing drive. PhD thesis, University of Edinburgh, UK.

Glew, D; Smith, M B; Miles-Shenton, D and Gorse, C (2017) Assessing the quality of retrofits in solid wall dwellings. International Journal of Building Pathology and Adaptation, 35(5), pp. 501-518.

Godby, C J (2002) A computational study of lexicalized noun phrases in English. PhD thesis, Ohio State University, USA.

Goh, Y M (2015) Empirical investigation of the average deployment force of personal fall-arrest energy absorbers. Journal of Construction Engineering and Management, 141(1): 04014059, ISSN 0733-9364

Goh, Y M and Chua, D (2013) Neural network analysis of construction safety management systems: A case study in Singapore. Construction Management and Economics, 31(5), pp. 460-470. ISSN 1466433X

Goldman, C M (2025) The built environment and employee well-being: An investigation into the attributes and impacts of supportive physical work environments in long-term care facilities. PhD thesis, University of Colorado at Denver, USA.

Goldstein, G (2021) An examination of cultural diversity discrimination claims in Texas construction companies: A case study. PhD thesis, Purdue University, USA.

Goldwyn, B (2022) Drawing from local, multi-hazard safety perceptions and engineering assessments for safer housing. PhD thesis, University of Colorado at Boulder, USA.

Goncikowski, M (2024) Research by design: determining the form of the initial architectural concept of a skyscraper building in warsaw. Architectural Engineering and Design Management, 20(1), pp. 1-31. ISSN 1745-2007

Goodhew, J; Goodhew, S; Auburn, T; Wilde, P D and Pahl, S (2009) A preliminary investigation of the potential for thermographic images to influence householders understanding of home energy consumption. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Gordon, C (2006) A formalism and a framework for planning of sensor-based construction inspections. PhD thesis, Carnegie Mellon University, USA.

Gorse, C; Stafford, A; Shenton, D M; Johnston, D; Sutton, R and Farmer, D (2012) Thermal performance of buildings and the management process. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Gorse, C A (2004) Monitoring, planning and tracking: Delay, disruption and legal risk management. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Gosling, J (2011) Flexibility strategies for engineer-to-order construction supply chains. PhD thesis, Cardiff University, UK.

Gosling, J; Naim, M and Towill, D (2013) Identifying and categorizing the sources of uncertainty in construction supply chains. Journal of Construction Engineering and Management, 139(1), pp. 102-110. ISSN 0733-9364

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Goulding, J S; Ezcan, V and Sutrisna, M (2018) Securing the embeddedness of psychosocial diffusion indicators into the Turkish construction industry: Silence is no longer golden. Journal of Financial Management of Property and Construction, 23(1), pp. 90-111. ISSN 1366-4387

Govender, N; Laryea, S and Watermeyer, R (2024) Conceptual research methodology to investigate the relationship between fees and quality of professional service outputs. Journal of Engineering, Design and Technology, 22(4), pp. 1185-1205. ISSN 1726-0531

Grabham, S and Manu, E (2022) Diffusion of platform thinking as an innovation in the construction supply chain. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(3), pp. 119-130. ISSN 17514304

Graham, B and Thomas, K (2005) An investigation into the development of knowledge management systems within the leading Irish construction companies. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Graham, D; Tommelein, I D and Smith, S D (2005) Cost reduction through vertical integration of the in-situ concrete supply chain. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Graham, G (2016) Factors influencing and risk associated with the use of drones by specialty construction companies in the United States of America. PhD thesis, Indiana State University, USA.

Graham, S (2005) Sustainable building design: A systematic approach. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Gray, C and Flanagan, R (1984) US productivity and fast tracking starts on the drawing board. Construction Management and Economics, 2(2), pp. 133-144. ISSN 01446193

Greeff, T N (2018) Justification for the recognition of a new nominate contract based on project defect management. LLD thesis, University of Pretoria, South Africa.

Greene, A (2002) Group and individual decision-making in project risk management. PhD thesis, Loughborough University, UK.

Greene, A; Root, D and Thorpe, A (2000) The comfort blanket of risk assessment: An investigation into the subjective assessment of risk. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Griffith, A (1984) A critical investigation of factors influencing buildability and productivity. PhD thesis, Heriot-Watt University, UK.

Griffith, A (1995) The current status of environmental management systems in construction. Engineering, Construction and Architectural Management, 2(1), pp. 3-16. ISSN 0969-9988

Griffith, A (1996) Review of environmental assessment in UK building construction: Current awareness, concerns and issues. Engineering, Construction and Architectural Management, 3(3), pp. 205-217. ISSN 0969-9988

Grimm, C T (1984) Facade topography in masonry failure investigation. Journal of Construction Engineering and Management, 110(2), pp. 145-151. ISSN 0733-9364

Grob, H L (1998) Self-regulation and safety programs in construction. PhD thesis, University of Notre Dame, USA.

Grosse, H (2015) Trust and construction projects: An auto-ethnographic exploration. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Grosse, H (2021) Developing teamwork skills: AEC students writing reflective journals and using action research. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Grosse, H (2023) Thrown into a construction dispute: The personal toll of aggressive claims management. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Gschösser, F (2011) Environmental assessment of road constructions: Life cycle assessment of Swiss road pavements and an accompanying analysis of construction and maintenance costs. DSc thesis, ETH Zürich, Switzerland.

Guevara, J; Herrera, L and Salazar, J (2022) Interorganizational sponsor networks in road and social infrastructure PPP equity markets. Journal of Construction Engineering and Management, 148(4): 04022009, ISSN 0733-9364

Guevara, M; Guevara, J; Vargas, H and Ozuna, A (2011) Promoting good design management practices in colombian construction projects. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Gunatilake, S (2013) The uptake and implementation of sustainable construction: transforming policy into practice. PhD thesis, University of Central Lancashire, UK.

Gunduz, M and Elsherbeny, H A (2020) Operational framework for managing construction-contract administration practitioners' perspective through modified Delphi method. Journal of Construction Engineering and Management, 146(3): 04019110, ISSN 0733-9364

Guo, K (2006) Risk of pavement warranties to contractors. PhD thesis, University of Florida, USA.

Guo, Q L (2001) Development of risk analysis models for decision-making in project management. PhD thesis, Edinburgh Napier University, UK.

Guo, W; Lu, W; Cao, W and Zhang, L (2024) Understanding the effect of contractual complexity on regulatory focus in construction projects: the moderating role of organizational culture. Construction Management and Economics, 42(11-12), pp. 992-1011. ISSN 01446193

Gupta, N K; Thakre, G D and Kumar, M (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology, 18(5), pp. 1357-1370. ISSN 1726-0531

Gupta, R; Gregg, M and Cherian, R (2020) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(1), pp. 228-255. ISSN 23984708

Gupta, R; Gregg, M; Manu, S; Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(1), pp. 56-74. ISSN 0961-3218

Gurmu, Argaw (2017) An investigation into construction management practices influencing labour productivity in multi-storey building projects. PhD thesis, University of Melbourne, Australia.

Gutierrez-Bucheli, L.; Muñoz, S.; Couper, R. and Maxwell, D. W. (2026) Mapping the landscape of productivity in construction research: An umbrella review of trends, gaps and future directions. Engineering, Construction and Architectural Management, 33(15), pp. 516-539. ISSN 0969-9988

Gündoğan, H (2021) An exploratory study on features of intelligent office buildings and development of an assessment tool. PhD thesis, Middle East Technical University, Turkey.

H M, C S (2018) Impact of construction practices on sustainable environment: a study at Bangalore. PhD thesis, Shri Jagdishprasad Jhabarmal Tibarewala University, India.

Haar, B W (1983) Collusion in the highway construction industry: Economic evidence as an investigative tool. PhD thesis, University of Nebraska - Lincoln, USA.

Haass, Omid (2018) Resilience and emergence in contemporary project evaluation: An epic battle between professional and political logics. PhD thesis, Griffith University, Brazil.

Habib, M R (1988) The relative effectiveness of large-scale public and private construction contractors: The case of Egypt. DSc thesis, George Washington University, USA.

Habibi, S (2019) Design concepts for the integration of bamboo in contemporary vernacular architecture. Architectural Engineering and Design Management, 15(6), pp. 475-489. ISSN 1745-2007

Hackett, J A (2011) The role of cost estimators in UK construction: a case for, and steps towards, an estimating profession. PhD thesis, University of Birmingham, UK.

Hackett, J A and Hicks, C M (2007) Estimating as a profession in UK construction. Engineering, Construction and Architectural Management, 14(1), pp. 26-51. ISSN 0969-9988

Haddad, S; Osmond, P and King, S (2017) Revisiting thermal comfort models in Iranian classrooms during the warm season. Building Research & Information, 45(4), pp. 457-473. ISSN 0961-3218

Hadjri, K (1992) The viability of 'no-fines' for the production of appropriate housing in Algeria. PhD thesis, CNAA, Oxford Polytechnic, UK.

Hagan, G N (2013) Managing complex construction projects in it multiproject environment by the contractor. PhD thesis, University of Leeds, UK.

Hager, C J (2005) Developing standards for undergraduate university construction education internship programs. PhD thesis, Texas A&M University, USA.

Hague, D J (1985) Incentives and motivation in the construction industry: A critique. Construction Management and Economics, 3(2), pp. 163-170. ISSN 01446193

Hairstans, R (2007) Optimisation of timber platform frame construction. PhD thesis, Edinburgh Napier University, UK.

Haji Abdullah, M A b (2015) An investigation of the development of mediation in the UK construction industry. PhD thesis, University of Manchester, UK.

Hajifathalian, K; Wambeke, B W; Liu, M and Hsiang, S M (2012) Effects of production control strategy and duration variance on productivity and work in process: Simulation-based investigation. Journal of Construction Engineering and Management, 138(9), pp. 1035-1043. ISSN 0733-9364

Haksever, A M (1998) Information overload in construction project management. PhD thesis, University of Reading, UK.

Halder, A and Batra, S (2024) Navigating the ethical discourse in construction: A state-of-the-art review of relevant literature. Journal of Construction Engineering and Management, 150(3): 03124001, ISSN 0733-9364

Hall, A T; Durdyev, S; Koc, K; Ekmekcioglu, O and Tupenaite, L (2023) Multi-criteria analysis of barriers to building information modeling (BIM) adoption for SMEs in new zealand construction industry. Engineering, Construction and Architectural Management, 30(9), pp. 3798-3816. ISSN 0969-9988

Halpin, D W (1973) An investigation of the use of simulation networks for modeling construction operations. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Halpin, J E (1999) The impact of out-of-town stores on local wildlife habitats. PhD thesis, University of Southampton, UK.

Hamid, M Y (2009) The feasibility of a process protocol for facilities management: An exploratory investigation in a higher education institution in the United Kingdom. PhD thesis, University of Salford, UK.

Hamida, M B and Hassanain, M A (2022) Investigation of AEC/FM practices in adaptive reuse projects. International Journal of Building Pathology and Adaptation, 40(4), pp. 636-660. ISSN 23984708

Hamma-Adama, M (2020) Framework for macro building information modelling (BIM) adoption in Nigeria. PhD thesis, Robert Gordon University, UK.

Hammond, S F; Gajendran, T; Savage, D A and Maund, K (2021) Unpacking the problems behind the limited green construction adoption: Towards a theoretical model. Engineering, Construction and Architectural Management, 28(4), pp. 833-844. ISSN 0969-9988

Hampson, K D (1994) Technology strategy and competitive performance: A study of bridge construction. PhD thesis, Stanford University, USA.

Hampton, P (2016) Influencing the undergraduate built environment curricula through stakeholder understandings of built environment employability skills. DProf thesis, Middlesex University, UK.

Hamza, A (2002) Partnering in the construction industry: an empirical investigation into the critical success factors. PhD thesis, Nottingham Trent University, UK.

Hamza, N and Greenwood, D (2007) The impact of procurement methods on delivering environmentally sensitive buildings. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Han, S H (1999) Risk-based go/no-go decision making model for international construction projects: The cross-impact analysis approach. PhD thesis, University of Colorado at Boulder, USA.

Hansen, K L (1993) How strategies happen: An investigation of the decision to upgrade CAD/CIE in architectural, engineering, and construction firms. PhD thesis, Stanford University, USA.

Haran, M; McCord, M; Hutchison, N; McGreal, S; Adair, A; Berry, J and Kashyap, A (2013) Financial structure of PPPs deals post-GFC: An international perspective. Journal of Financial Management of Property and Construction, 18(2), pp. 184-203. ISSN 1366-4387

Harrison, B W (1982) Socially responsive professional behavior of architectural firms: A social psychological perspective. PhD thesis, University of Michigan, USA.

Hartley, R (2016) Safety culture and climate in the construction industry: a multi-phase mixed methods investigation. PhD thesis, Loughborough University, UK.

Hartley, R and Cheyne, A (2010) At first sight: Impressions of safety culture on construction sites. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Hartman, F and Snelgrove, P (1996) Risk allocation in lump-sum contracts: concept of latent dispute. Journal of Construction Engineering and Management, 122(3), pp. 291-296. ISSN 0733-9364

Hartman, F; Snelgrove, P and Ashrafi, R (1997) Effective wording to improve risk allocation in lump sum contracts. Journal of Construction Engineering and Management, 123(4), pp. 379-387. ISSN 0733-9364

Hartwell, J C; Upadhyay, Y and Sourani, A (2019) Influential factors of life cycle management in education PFI projects. Built Environment Project and Asset Management, 9(2), pp. 302-314. ISSN 2044-124X

Hartwig, J and Kockat, J (2016) Macroeconomic effects of energetic building retrofit: Input-output sensitivity analyses. Construction Management and Economics, 34(2), pp. 79-97. ISSN 01446193

Haruna, A.; Likhitruangsilp, V.; Pinich, S. and Ioannou, P. G. (2025) Critical success factors for circular economy implementation toward sustainable construction: An iterative stationary approach. Architectural Engineering and Design Management, 21(6), pp. 1416-1434. ISSN 1745-2007

Hasan, A; Ahn, S; Rameezdeen, R and Baroudi, B (2021) Investigation into post-adoption usage of mobile icts in Australian construction projects. Engineering, Construction and Architectural Management, 28(1), pp. 351-371. ISSN 0969-9988

Hasan, N (2006) Developing a balanced scorecard model for evaluation of project management and performance. PhD thesis, University of Birmingham, UK.

Hasanzadeh, S; Dao, B; Esmaeili, B and Dodd, M D (2019) Role of personality in construction safety: Investigating the relationships between personality, attentional failure, and hazard identification under fall-hazard conditions. Journal of Construction Engineering and Management, 145(9): 04019052, ISSN 0733-9364

Hashemi, S; Ghaffarianhoseini, A; Ghaffarianhoseini, A; Naismith, N and Jamei, E (2026) A systematic review of microclimate and outdoor thermal comfort studies in Australia and New Zealand. Smart and Sustainable Built Environment, 15(1), pp. 156-181. ISSN 2046-6099

Hassan, H (2020) Psychosocial risks among migrant workers in the Middle East construction sector. PhD thesis, University of Nottingham, UK.

Hassan, M E (2013) Assessing the impact of lean/integrated project delivery system on final project success. PhD thesis, George Mason University, USA.

Hassan, M E M (2017) Modeling the macroeconomic impact of construction spending as a public policy tool - the case of employment. PhD thesis, Purdue University, USA.

Hassan, P F; Griffith, A and Stephenson, P (2005) An empirical study of the training needs of site managers within the uk construction industry. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Hassanein, A and Melin, J (1997) Crew design methodology for construction contractors. Journal of Construction Engineering and Management, 123(3), pp. 203-207. ISSN 0733-9364

Hassanein, M A A G (1990) Mechanisms for transfer of price risk of construction materials. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hasso, M H (1996) Strategic systems model for the management of United States international engineering and construction growth. PhD thesis, Worcester Polytechnic Institute, USA.

Hatmoko, J U D (2008) The impact of supply chain management practice on construction project performance. PhD thesis, University of Newcastle upon Tyne, UK.

Hatmoko, J U D and Scott, S (2010) Simulating the impact of supply chain management practice on the performance of medium-sized building projects. Construction Management and Economics, 28(1), pp. 35-49. ISSN 1466433X

Hatush, Z A (1996) Contractor selection using the multiattribute utility theory. PhD thesis, University of Salford, UK.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(2), pp. 373-419.

He, Hailong (2017) Exploring the combined impact of project portfolio construction and steering on project portfolio performance. PhD thesis, University of Gloucestershire, UK.

Heaton, J (2020) Development of asset information requirements to support asset management. PhD thesis, University of Cambridge, UK.

Hefferan, Michael (2006) An examination of the interface between commercial property assets and contemporary knowledge-intensive firms: Demands, responses and priorities. PhD thesis, Queensland University of Technology, Australia.

Heffernan, E E (2015) Delivering zero carbon homes and sustainable communities: The potential of group self-build housing in England. PhD thesis, University of Plymouth, UK.

Henderson, J R and Ruikar, K (2010) Technology implementation strategies for construction organisations. Engineering, Construction and Architectural Management, 17(3), pp. 309-327. ISSN 0969-9988

Henderson, J R; Ruikar, K and Dainty, A R J (2010) The need for embedding 'learning' in healthcare projects. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Heravi Torbati, Amir Hossein (2014) Improving construction management: An investigation into the influences of effective stakeholder involvement on project quality outcomes. PhD thesis, Queensland University of Technology, Australia.

Herazo, Benjamin (2017) The influence of sustainability in project management practices in the building sector. PhD thesis, Université de Montréal, Canada.

Heredia Rojas, Boris Fabrizio (2017) The contingent effects of value creation processes on project value: An empirical analysis from project managers' perspective. PhD thesis, University of Sydney, Australia.

Hermawan, F (2015) A strategic approach to enhancing sustainable practices in public building projects: a case study of Indonesian local authorities. PhD thesis, Coventry University, UK.

Hernandez, W (2017) Development of a sustainable quality assurance program for transporation infrastructure. PhD thesis, University of Rhode Island, USA.

Hetherton, T and Charlson, J (2015) When statutes collide: Potential recovery of own party adjudication costs. International Journal of Law in the Built Environment, 7(3), pp. 214-230. ISSN 1756-1450

Hickey, P J and Cui, Q (2024) Tracing the career trajectories of architecture, engineering and construction (AEC) women leaders. Construction Management and Economics, 42(4), pp. 289-306. ISSN 01446193

Higham, A and Fortune, C (2010) The early stage benefit planning of housing rengeneration projects: The gap between theory and practice. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Hill, C (2010) The concerns of health, safety and welfare within the tri-partite relationship surrounding work placement for construction. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Hindle, R D and Muller, M H (1997) The role of education as an agent of change: a two-fold effect. Journal of Construction Procurement, 3(1), pp. 56-69. ISSN 1358-9180

Hinze, J and Antal, T (1991) Construction contract provisions for preservation of artifacts. Journal of Construction Engineering and Management, 117(1), pp. 106-117. ISSN 0733-9364

Hinze, J and Bren, D (1996) Analysis of fatalities and injuries due to powerline contacts. Journal of Construction Engineering and Management, 122(2), pp. 177-182. ISSN 0733-9364

Hirbod, S (2018) The application of EnerPHit standard to residential tower blocks in the UK. PhD thesis, University of Kent, UK.

Ho, Man Fong Christabel (2003) Ethics management in a construction organisation: Employees' attitudes to corporate codes of ethics. PhD thesis, University of New South Wales, Australia.

Hollar, D A; Rasdorf, W; Liu, M; Hummer, J E; Arocho, I and Hsiang, S M (2013) Preliminary engineering cost estimation model for bridge projects. Journal of Construction Engineering and Management, 139(9), pp. 1259-1267. ISSN 0733-9364

Hollis, M and Bright, K (1999) Surveying the survey. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Holt, G D (1997) Classifying construction contractors: A case study using cluster analysis. Building Research & Information, 25(6), pp. 374-382. ISSN 0961-3218

Hooper, M (2015) BIM anatomy II: Standardisation needs & support systems. PhD thesis, Lund University, Sweden.

Hoque, M I and Hasan, M (2025) Factors affecting the construction quality in Bangladesh. International Journal of Building Pathology and Adaptation, 43(3), pp. 321-337. ISSN 2398-4708

Hornaday, W C; Haas, C T; O’Connor, J T and Wen, J (1993) Computer-aided planning for heavy lifts. Journal of Construction Engineering and Management, 119(3), pp. 498-515. ISSN 0733-9364

Hoseini, E; Bosch-Rekveldt, M and Hertogh, M (2020) Cost contingency and cost evolvement of construction projects in the preconstruction phase. Journal of Construction Engineering and Management, 146(6): 05020006, ISSN 0733-9364

Hossain, M K (2015) Investigating the relationship between the culture of construction project-based organisations and the implementation of building information modelling. PhD thesis, University of Dundee, UK.

Hosseini, S. M.; Heidari, S.; Attia, S.; Wang, J. and Triantafyllidis, G. (2026) Biomimetic kinetic façade as a real-time daylight control: Complex form versus simple form with proper kinetic behavior. Smart and Sustainable Built Environment, 15(2), pp. 472-507. ISSN 2046-6099

Hosseini, A (2019) Data-driven modeling of in-service performance of flexible pavements, using life-cycle information. PhD thesis, Temple University, USA.

Hosseini, M R; Bosch-Sijtsema, P; Arashpour, M; Chileshe, N and Merschbrock, C (2018) A qualitative investigation of perceived impacts of virtuality on effectiveness of hybrid construction project teams. Construction Innovation, 18(1), pp. 109-131. ISSN 1471-4175

Hosseini, M R; Chileshe, N; Jepson, J and Arashpour, M (2016) Critical success factors for implementing risk management systems in developing countries. Construction Economics and Building, 16(1), pp. 18-32. ISSN 2204-9029

Hou, Shan (2014) An investigation into the development of low/zero carbon design training programmes for the purpose of disseminating the knowledge and skills of low/zero carbon design to architects in practice in England and Wales. PhD thesis, Cardiff University, UK.

Howard, Robert W (2021) Of incentive, bias, and behaviour: an empirical economic investigation into project delivery constructs influencing the adoption of building information modelling. PhD thesis, University College London, UK.

Howes, R (1983) Project management control utilising innovative forecasting and computerised data bases. PhD thesis, Brunel University, UK.

Howes, R (2000) Improving the performance of earned value analysis as a construction project management tool. Engineering, Construction and Architectural Management, 7(4), pp. 399-411. ISSN 0969-9988

Hoxha, V (2026) Examining the nexus of building regulations, urban planning, and housing prices and affordability: Insights from prishtina, Kosovo. International Journal of Building Pathology and Adaptation, 44(1), pp. 126-142. ISSN 2398-4708

Hoxha, V (2020) Measuring embodied CO2 emission in construction materials in Kosovo apartments. International Journal of Building Pathology and Adaptation, 38(3), pp. 405-421. ISSN 23984708

Hsu, P Y; Aurisicchio, M; Angeloudis, P and Whyte, J (2020) Understanding and visualizing schedule deviations in construction projects using fault tree analysis. Engineering, Construction and Architectural Management, 27(9), pp. 2501-2522. ISSN 0969-9988

Hu, E C M; Ng, I and Lau, O M F (2011) Speculative bubbles in mass and luxury properties: An investigation of the Hong Kong residential market. Construction Management and Economics, 29(8), pp. 781-793. ISSN 1466433X

Hua, X; Zhang, S; Shi, X and Zhang, Y (2025) Differences in risk analysis between workers and managers: Study from the perspective of neuroscience. Journal of Construction Engineering and Management, 151(7): 04025079, ISSN 0733-9364

Hua, Y and Liu, A M M (2017) An investigation of person-culture fit and person-task fit on ICT adoption in the Hong Kong construction industry. Architectural Engineering and Design Management, 13(6), pp. 423-438. ISSN 1745-2007

Huang, C; Fisher, N and Broyd, T (2002) Development of a triangular TPC model to support adoption of construction integrated system. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Huang, C-N (2003) Time study on two-echelon supply chain for steel framing construction: Field investigation and networking model simulation. PhD thesis, University of Wisconsin - Madison, USA.

Huang, R Y and Halpin, D W (1995) Graphical-based method for transient evaluation of construction operations. Journal of Construction Engineering and Management, 121(2), pp. 222-229. ISSN 0733-9364

Huang, R-Y (1994) A graphical-based method for transient evaluation of construction operations. PhD thesis, Purdue University, USA.

Huang, X and Hinze, J (2003) Analysis of construction worker fall accidents. Journal of Construction Engineering and Management, 129(3), pp. 262-271. ISSN 0733-9364

Huang, Y L (2009) Prediction of contractor default probability using structural models of credit risk: An empirical investigation. Construction Management and Economics, 27(6), pp. 581-596. ISSN 1466433X

Huang, Y-L (1995) Project and policy analysis of build-operate-transfer infrastructure development. PhD thesis, University of California, Berkeley, USA.

Hubner, Marilyn (2016) Constructing safety training: Foundations of attitudes and perceptions of the construction site supervisor. PhD thesis, Victoria University, Australia.

Hughes, B; Edwards, D J; Martek, I; Chileshe, N and Thwala, W D (2022) Assessing the "clerk of works" role in delivering quality affordable housing: A UK case study. Smart and Sustainable Built Environment, 11(4), pp. 996-1016. ISSN 2046-6099

Hughes, P M (1990) Buildings and the building trade in Worcester 1540-1650. PhD thesis, University of Birmingham, UK.

Hugill, D J (2001) An examination of project management team meetings in railway construction. PhD thesis, University of Manchester, UK.

Hui, E C M; Liang, C; Wang, Z; Song, B T and Gu, Q (2012) Real estate bubbles in China: A tale of two cities. Construction Management and Economics, 30(11), pp. 951-961. ISSN 1466433X

Hui, E C M; Lo, T K K; Chen, J and Wang, Z (2012) Housing and consumer markets in urban China. Construction Management and Economics, 30(2), pp. 117-131. ISSN 1466433X

Hulathdoowage, N D and Hadiwattage, C (2022) Applicability of drywall technologies for disaster-induced housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 498-515. ISSN 1759-5916

Humphrey, S D (2005) Construction procurement and profit: an analysis of the relationship from a contractor's perspective. PhD thesis, Loughborough University, UK.

Hunter, I A N; Mitrovic, D; Hassan, T M; Gayoso, A and Garas, F (1999) The elsewise vision, development routes and recommendations. Engineering, Construction and Architectural Management, 6(1), pp. 51-62. ISSN 0969-9988

Hunter, K and Kelly, J (2003) An investigation of commonality of issues at different project stages using a three-stage project model. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Hussain, R S; Ruikar, K; Enoch, M P; Brien, N and Gartside, D (2017) Process mapping for road works planning and coordination. Built Environment Project and Asset Management, 7(2), pp. 157-172. ISSN 2044-124X

Hutchings, D M (2002) An investigation of management practices used in small-volume home building companies of the United States. PhD thesis, Texas A&M University, USA.

Hutchings, Sally J (2023) An investigation of methods used to estimate the future burden of disease due to occupation. PhD thesis, University of Manchester, UK.

Hyde, R (2023) An investigation into the relationship between technical design, fabrication process and material development for the production of thin, lightweight, high-performance concrete cladding components for the construction of beautiful, durable and resilient building envelopes. PhD thesis, Queen's University Belfast, UK.

Håkansson, H and Ingemansson, M (2013) Industrial renewal within the construction network. Construction Management and Economics, 31(1), pp. 40-61. ISSN 1466433X

Ibraheem, Y; Piroozfar, P A E; Farr, E R P and Ravenscroft, N (2020) Methodological evaluation of integrated façade systems: Sensitivity analysis of net energy in a base-case model. International Journal of Building Pathology and Adaptation, 38(1), pp. 107-126. ISSN 23984708

Ibrahim, A D (2007) The development of a procurement strategy for primary health care facilities in Nigeria. PhD thesis, Loughborough University, UK.

Ibrahim, A D; Price, A D F and Dainty, A R J (2008) Is the local improvement finance trust (LIFT) procurement initiative delivering the expected economies of scale? Results from three case studies. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Ibrahim, A D; Price, A D F and Dainty, A R J (2009) Evaluation of key practices under the local improvement finance trust (lift) initiative for UK healthcare facilities. Engineering, Construction and Architectural Management, 16(5), pp. 504-518. ISSN 0969-9988

Ibrahim, M W W (2018) Improving project performance by mitigating out-of-sequence work and assessing construction readiness. PhD thesis, University of Wisconsin - Madison, USA.

Ibrahim, Y M; Kaka, A P; Aouad, G and Kagioglou, M (2008) As-built documentation of construction sequence by integrating virtual reality with time-lapse movies. Architectural Engineering and Design Management, 4(2), pp. 73-84. ISSN 1745-2007

Idan, C K (2003) Quality function deployment (QFD) in the UK construction industry. PhD thesis, Nottingham Trent University, UK.

Idoro, G I and Okun, B O (2009) Evaluating the contribution of project team members to time-overrun in Nigerian federal government projects. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ihuah, P W (2015) Conceptual framework for the sustainable management of social (public) housing estates in the Niger Delta region of Nigeria. PhD thesis, University of Salford, UK.

Ikpe, E K P P D O D (2006) The management of construction health and safety: Investigating the cost-benefit. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ilozor, B B (2008) Architectural and building features disparity and preservation of structural and fabrics integrity. Journal of Engineering, Design and Technology, 6(1), pp. 33-47. ISSN 1726-0531

Ilozor, B D (2009) Differential management of waste by construction sectors: A case study in Michigan, USA. Construction Management and Economics, 27(8), pp. 763-770. ISSN 1466433X

Imani, E and Asefi, M (2021) Empirical investigation of factors that enhance development of technology in design process improvement in architecture education: Analyses of students' views. Engineering, Construction and Architectural Management, 28(10), pp. 3164-3189. ISSN 0969-9988

Innella, Filomena (2020) Performance of building modules production and transportation. PhD thesis, Monash University, Australia.

Invernizzi, D C (2019) Benchmarking nuclear decommissioning. PhD thesis, University of Leeds, UK.

Invernizzi, D C; Locatelli, G and Brookes, N J (2020) Characterising nuclear decommissioning projects: An investigation of the project characteristics that affect the project performance. Construction Management and Economics, 38(10), pp. 947-963. ISSN 01446193

Ioannou, P G (1989) Evaluation of subsurface exploration programs. Journal of Construction Engineering and Management, 115(3), pp. 339-356. ISSN 0733-9364

Irurah, D K and Holm, D (1999) Energy impact analysis of building construction as applied to South Africa. Construction Management and Economics, 17(3), pp. 363-374. ISSN 01446193

Irving, P A (2016) Explicating excessive financial resource allocation by building control in achieving regulatory conformity in domestic extensions. PhD thesis, University of Salford, UK.

Isa, M F M (2013) Quality modeling and improvement of university facilities services using six-sigma: A case study on wayne state university FPM services. PhD thesis, Wayne State University, USA.

Isikdag, U; Underwood, J; Aouad, G and Trodd, N (2007) Investigating the role of building information models as a part of an integrated data layer: A fire response management case. Architectural Engineering and Design Management, 3(2), pp. 124-142. ISSN 1745-2007

Ismail, M R; Sun, M and Bowles, G (2021) A risk-oriented tender evaluation system for construction projects in Malaysia. Engineering, Construction and Architectural Management, 28(7), pp. 1887-1907. ISSN 0969-9988

Istijono, B; Hakam, A and Ophiyandri, T (2016) Landslide hazard of Maninjau area. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 302-312. ISSN 1759-5916

Ive, G (1994) A theory of ownership types applied to the construction majors. Construction Management and Economics, 12(4), pp. 349-364. ISSN 01446193

Izzat, R M (1977) A computerised approach to bidding strategy in civil engineering. PhD thesis, Aston University, UK.

Izzudin Mohd Ali, M Y (1994) Critical investigation of joint ventures by UK contractors with other European partners. PhD thesis, Loughborough University, UK.

Jaafar, M; Nuruddin, A R and Abu Bakar, S P S (2014) Business success and psychological traits of housing developers. Construction Economics and Building, 14(2), pp. 57-72. ISSN 2204-9029

Jabang, S-W (2017) An investigation into the use of public procurement and commissioning to deliver community (societal) value. PhD thesis, University of Birmingham, UK.

Jabour Al Hazmi, H S (2011) National culture and knowledge sharing practices: Empirical study in the context of the procurement of educational building projects in Saudi Arabia. PhD thesis, Griffith University, Australia.

Jacomit, A M and Granja, A D (2011) An investigation into the adoption of target costing on Brazilian public social housing projects. Architectural Engineering and Design Management, 7(2), pp. 113-127. ISSN 1745-2007

Jacques de Sousa, L; Poças Martins, J and Sanhudo, L (2024) Predicting construction project compliance with machine learning model: case study using Portuguese procurement data. Engineering, Construction and Architectural Management, 31(13), pp. 285-302. ISSN 0969-9988

Jafari, A and Akhavian, R (2019) Driving forces for the US residential housing price: A predictive analysis. Built Environment Project and Asset Management, 9(4), pp. 515-529. ISSN 2044-124X

Jafary, P; Shojaei, D; Rajabifard, A and Ngo, T (2024) BIM and real estate valuation: Challenges, potentials and lessons for future directions. Engineering, Construction and Architectural Management, 31(4), pp. 1642-1677. ISSN 0969-9988

Jahren, C T and Johnston, D W (2011) Linkages between construction engineering education and research. Journal of Construction Engineering and Management, 137, pp. 887-894. ISSN 0733-9364

Jaiganesh, V and Prakasan, K (2016) Comparison of flow behaviour in pressurized gating systems using water models and numerical simulation. Journal of Engineering, Design and Technology, 14(3), pp. 652-674.

Jain, Nishesh (2021) Reducing the performance gap using calibrated simulation models. PhD thesis, University College London, UK.

Jalloul, Hiba (2024) Leveraging emergence for enhanced planning and decision-making in the built environment: Applications in resilience and sustainability planning. PhD thesis, Florida State University, USA.

Jalloul, H; Choi, J; Manheim, D; Yesiller, N and Derrible, S (2024) Incorporating disaster debris into sustainable construction research and practice. Journal of Construction Engineering and Management, 150(1): 02523001, ISSN 0733-9364

Jarkas, A M (2005) An investigation into the influence of buildability factors on productivity of in situ reinforced concrete construction. PhD thesis, University of Dundee, UK.

Jarkas, A M (2010) Critical investigation into the applicability of the learning curve theory to rebar fixing labor productivity. Journal of Construction Engineering and Management, 136(12), pp. 1279-1288. ISSN 0733-9364

Jarkas, A M (2010) Buildability factors influencing micro-level formwork labour productivity of slab panels in building floors. Architectural Engineering and Design Management, 6(3), pp. 161-174. ISSN 1745-2007

Jarkas, A M (2011) Buildability factors that influence micro-level formwork labour productivity of beams in building floors. Journal of Construction in Developing Countries, 16(1), pp. 1-18. ISSN 1823-6499

Jarkas, A M (2012) Influence of buildability factors on rebar installation labor productivity of columns. Journal of Construction Engineering and Management, 138(2), pp. 258-267. ISSN 0733-9364

Jarkas, A M (2013) Primary factors influencing bid mark-up size decisions of general contractors in Kuwait. Journal of Financial Management of Property and Construction, 18(1), pp. 53-75. ISSN 1366-4387

Jarkas, A M (2015) Factors influencing labour productivity in Bahrain's construction industry. International Journal of Construction Management, 15(1), pp. 94-108. ISSN 1562-3599

Jarkas, A M (2017) Beamless or beam-supported building floors: Is buildability knowledge the missing link to improving productivity? Engineering, Construction and Architectural Management, 24(3), pp. 537-552. ISSN 0969-9988

Jarkas, A M and Horner, R M W (2011) Revisiting the applicability of learning curve theory to formwork labour productivity. Construction Management and Economics, 29(5), pp. 483-493. ISSN 1466433X

Jarrah, R; Kulkarni, D and O'Connor, J T (2007) Cash flow projections for selected TxDoT highway projects. Journal of Construction Engineering and Management, 133(3), pp. 235-241. ISSN 0733-9364

Jaselskis, E J and Russell, J S (1992) Risk analysis approach to selection of contractor evaluation method. Journal of Construction Engineering and Management, 118(4), pp. 814-821. ISSN 0733-9364

Jaskot, P B (1993) The architectural policy of the SS, 1936-1945. PhD thesis, Northwestern University, USA.

Javed, A A; Pan, W; Chen, L and Zhan, W (2018) A systemic exploration of drivers for and constraints on construction productivity enhancement. Built Environment Project and Asset Management, 8(3), pp. 239-252. ISSN 2044-124X

Jayasinghe, R S; Rameezdeen, R and Chileshe, N (2023) Modelling the cause and effect relationship risks in reverse logistics supply chains for demolition waste. Engineering, Construction and Architectural Management, 30(9), pp. 4018-4044. ISSN 0969-9988

Jean, A T; Wang, X and Suntu, S (2020) Corporate social responsibility in madagascar: An investigation on Chinese companies. International Journal of Construction Management, 20(1), pp. 29-38. ISSN 1562-3599

Jeelani, I; Albert, A; Han, K and Azevedo, R (2018) Are visual search patterns predictive of hazard recognition performance? Empirical investigation using eye-tracking technology. Journal of Construction Engineering and Management, 145(1): 04018115, ISSN 0733-9364

Jeffrey, J H (2010) Recurrent problems in the construction process: an action research study of the design and construction quality of hospital en-suites. PhD thesis, University of Salford, UK.

Jeljeli, M N; Russell, J S; Guy Meyer, H W and Vonderohe, A P (1993) Potential applications of geographic information systems to construction industry. Journal of Construction Engineering and Management, 119(1), pp. 72-86. ISSN 0733-9364

Jennings, Iain C (1997) Systemic integration in construction project organisations. PhD thesis, University of Melbourne, Australia.

Jennings, P and Holt, G D (1998) Prequalification and multi-criteria selection: A measure of contractors' opinions. Construction Management and Economics, 16(6), pp. 651-660. ISSN 01446193

Jimoh, I (2021) What explains the efficiency of major public project delivery in Nigeria? PhD thesis, University of Cambridge, UK.

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Jin, X H (2010) Determinants of efficient risk allocation in privately financed public infrastructure projects in Australia. Journal of Construction Engineering and Management, 136(2), pp. 138-150. ISSN 0733-9364

Jobst, J W (2009) What resident engineers should know about risk management. Journal of Construction Engineering and Management, 135(6), pp. 437-438. ISSN 0733-9364

Johansen, E and Carson, J (2003) Improving the effectiveness of the building design management process in the UK. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Johari, S and Jha, K N (2019) Determinants of workmanship: Defining quality in construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Johnson, G L (2020) An examination of the effect of capital structure on financial performance among construction firms in Romania 2010-2016. PhD thesis, Capella University, USA.

Johnson, R D (2016) Integrated project delivery in architecture, engineering, and construction: An interpretative phenomenological analysis of practice. DM thesis, Colorado Technical University, USA.

Johnston, B A (2012) Characterizing virtual prototype constructability programming for the pictographic instruction of procedure. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Johnston, D W; Kahn, K P and Phillips, J B (1989) Formwork pressures in tall and thick concrete walls. Journal of Construction Engineering and Management, 115(3), pp. 444-461. ISSN 0733-9364

Jones, D W and Harris, F C (1982) Company acquisitions and business performance in the construction industry. Construction Papers, 1(3), pp. 5-19. ISSN 0144-8587

Jones, M W (2009) An analysis of the impact of information systems on the level of trust in the construction industry. PhD thesis, Walden University, USA.

Jones, T; Shan, Y and Goodrum, P M (2010) An investigation of corporate approaches to sustainability in the US engineering and construction industry. Construction Management and Economics, 28(9), pp. 971-983. ISSN 1466433X

Jordan, E; Gross, M E; Javernick-Will, A N and Garvin, M J (2011) Use and misuse of qualitative comparative analysis. Construction Management and Economics, 29(11), pp. 1159-1173. ISSN 1466433X

Jowett, B; Edwards, D J and Kassem, M (2024) Field BIM and mobile BIM technologies: A requirements taxonomy and its interactions with construction management functions. Construction Innovation, 24(1), pp. 134-163. ISSN 1471-4175

Joy, E; Aadhithian R and Raja, C (2024) Digital 3D modeling for preconstruction real-time visualization of home interior design through virtual reality. Construction Innovation, 24(2), pp. 643-653. ISSN 1471-4175

Jung, C; Ismail, M A; Arar, M and AlQassimi, N (2026) Mitigating indoor air pollution in uae's high-rise apartment buildings: A study on eco-friendly materials and adsorbents. Smart and Sustainable Built Environment, 15(1), pp. 40-61. ISSN 2046-6099

Jung, Y (1997) Information systems planning methodology for the construction industry. PhD thesis, University of Texas at Austin, USA.

Jung, Y J (2007) Subsurface utility engineering for highway projects: A study of utility impact rating and benefit-cost analysis. PhD thesis, Pennsylvania State University, USA.

Jungclaus, M A (2024) Embodied carbon emissions benchmarks of residential and commercial reference buildings in the United States. PhD thesis, University of Colorado at Boulder, USA.

Kadan, R; Omotayo, T S; Boateng, P; Nani, G and Wilson, M (2024) The application of Bayesian network analysis in demystifying construction project subcontracting complexities for developing countries. Journal of Financial Management of Property and Construction, 29(3), pp. 444-469. ISSN 1366-4387

Kaewsri, N and Tongthong, T (2011) An investigation of women engineers in non-traditional occupations in the Thai construction industry. Construction Economics and Building, 11(2), pp. 1-21. ISSN 2204-9029

Kalu, I E and Ogbonna, N J (2021) Investigation of environmental effect of stone quarrying activities on soil and water in Akpoha and Ishiagu communities of Ebonyi State, Nigeria. International Journal of Construction Management, 21(12), pp. 1185-1199. ISSN 1562-3599

Kam, C W (2000) Quality assurance of construction works in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Kamal, P and Ahuja, S (2019) An ensemble-based model for prediction of academic performance of students in undergrad professional course. Journal of Engineering, Design and Technology, 17(4), pp. 769-781. ISSN 1726-0531

Kaming, P F (1996) A productivity audit system for construction management in Indonesia. PhD thesis, University of Wolverhampton, UK.

Kapogiannis, G (2013) A conceptual framework for project managers to improve projects performance. PhD thesis, University of Salford, UK.

Kapoor, P (2022) Exploratory study of the SMES of manufacturers of construction products in Uttar Pradesh. PhD thesis, Amity University, Noida, India.

Kar, S and Jha, K N (2021) Investigation into lead time of construction materials and influencing factors. Journal of Construction Engineering and Management, 147(3): 01998, ISSN 0733-9364

Karampour, B; Mohamed, S; Karampour, H and Spagnolo, S L (2021) Formulating a strategic plan for BIM diffusion within the AEC Italian industry: The application of diffusion of innovation theory. Journal of Construction in Developing Countries, 26(1), pp. 161-184. ISSN 1823-6499

Kasbar, M; Staub-French, S; Pilon, A; Poirier, E; Teshnizi, Z and Froese, T (2021) Construction productivity assessment on brock commons tallwood house. Construction Innovation, 21(4), pp. 951-968. ISSN 1471-4175

Kashyap, V S; Sancheti, G and Yadav, J S (2023) Mechanical and microstructural behavior of concrete containing marble and nano silica. Journal of Engineering, Design and Technology, 21(5), pp. 1588-1603. ISSN 1726-0531

Kauffold, P V (1977) Critical resource allocation in stochastic project networks. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kaushik, A; Arif, M; Ebohon, O J; Arsalan, H; Rana, M Q and Obi, L (2023) Effect of indoor environmental quality on visual comfort and productivity in office buildings. Journal of Engineering, Design and Technology, 21(6), pp. 1746-1766. ISSN 1726-0531

Kavuri, A S; Soetanto, R; Goodier, C; Murguia, D and Szczygiel, M (2020) Scenarios for the digitalisation of the construction industry. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Kawal, D E (1970) A systems model of a construction firm. PhD thesis, Iowa State University, USA.

Kazaz, A and Ulubeyli, S (2006) Organizational factors influencing construction manpower productivity in Turkey. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kempton, J (2006) The potential for lean thinking in the refurbishment and repair of dwellings in the registered social landlord sector. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Kempton, J (2007) Mixed versus mono tenure estates: Is there a difference in asset management needs? In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Kendir-Beraha, Elif (2015) Learning from the construction site: An epistemological investigation of stonemasons and architects in action. PhD thesis, RMIT University, Australia.

Keraminiyage, K P (2009) Achieving high process capability maturity in construction organisations. PhD thesis, University of Salford, UK.

Kereri, J O and Adamtey, S (2019) RFID use in residential/commercial construction industry. Journal of Engineering, Design and Technology, 17(3), pp. 591-612. ISSN 1726-0531

Kestle, L; London, K; Bodger, P and Storey, B (2002) The development of a typology for remote construction projects. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Kestle, L; Potangaroa, R and Storey, B (2011) Integration of lean design and design management and its influence on the development of a multidisciplinary design management model for remote site projects. Architectural Engineering and Design Management, 7(2), pp. 139-153. ISSN 1745-2007

Kestle, L; Storey, B and Potangaroa, R (2008) Towards the validation of a conceptual design management model for remote site projects. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Khadour, L (2010) Total quality environmental management framework towards sustainability (UK novated D&B principal contractors). PhD thesis, Nottingham Trent University, UK.

Khadour, Lina (2010) Total quality environmental management (tqem) framework towards sustainability (UK novated D&B principal contractors). PhD thesis, Nottingham Trent University, UK.

Khajehzadeh, I and Vale, B (2017) How house size impacts type, combination and size of rooms: A floor plan study of New Zealand houses. Architectural Engineering and Design Management, 13(4), pp. 291-307. ISSN 1745-2007

Khalid, U (2022) Investigation into the development of a human reliability analysis framework for the safety management of construction projects. PhD thesis, Nottingham Trent University, UK.

Khamaksorn, A (2019) Knowledge transfer processes in international construction joint venture projects in Thailand. PhD thesis, Oxford Brookes University, UK.

Khamseh, A and Marei, P (2020) Designing a model developed to assess the capabilities of technological innovation in Iranian construction of power plant equipment industries. Journal of Engineering, Design and Technology, 18(5), pp. 1241-1249. ISSN 1726-0531

Khan, A; Do, J and Kim, D (2017) Experimental optimization of high-strength self-compacting concrete based on D-optimal design. Journal of Construction Engineering and Management, 143(4): 04016108, ISSN 0733-9364

Khanam, B R (2000) Contributions of highway capital to output, cost, and productivity growth: Evidence from the Canadian goods-producing sector. PhD thesis, York University, Canada.

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Khatib, J; Jahami, A; El Kordi, A; Sonebi, M; Malek, Z; Elchamaa, R and Dakkour, S (2023) Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology, 21(3), pp. 862-882. ISSN 1726-0531

Khorrami Shad, H; Tak Wing Yiu, K; Lovreglio, R and Feng, Z (2024) State-of-the-art analysis of the integration of augmented reality with construction technologies to improve construction safety. Smart and Sustainable Built Environment, 13(6), pp. 1434-1449. ISSN 2046-6099

Khuc, T Q; Nguyen, V T and Do, S T (2026) Barriers to the adoption of blockchain technology in the construction industry: A total interpretive structural modeling (t ISM) and demat el approach. Construction Innovation, 26(1), pp. 260-285. ISSN 1471-4175

Khurana, M; Garvin, M J and Mahalingam, A (2022) Synthesis of relational practices for PPP contracts and their linkage with governance mechanisms. Journal of Construction Engineering and Management, 148(12): 04022131, ISSN 0733-9364

Khurana, Mayank (2021) Investigation of contractual specification and implementation of relational approaches in public private partnership (PPP) projects. PhD thesis, Virginia Tech, USA.

Kiang, Q L (1992) Comparative variability in tender bids for refurbishment and new build work. Construction Management and Economics, 10(3), pp. 263-269. ISSN 01446193

Kiani, M; Bagheri, M; Ebrahimi, A and Alimohammadlou, M (2022) A model for prioritizing outsourceable activities in universities through an integrated fuzzy-MCDM method. International Journal of Construction Management, 22(5), pp. 784-800. ISSN 1562-3599

Kibwami, N and Tutesigensi, A (2014) Using the literature based discovery research method in a context of built environment research. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Kim, A (2024) A comprehensive approach to industrial decarbonization efforts within the building materials sector. PhD thesis, University of California, Davis, USA.

Kim, A and Arditi, D (2010) Performance of MBE/DBE/WBE construction firms in transportation projects. Journal of Construction Engineering and Management, 136(7), pp. 768-777. ISSN 0733-9364

Kim, A and Arditi, D (2010) Performance of minority firms providing construction management services in the US transportation sector. Construction Management and Economics, 28(8), pp. 839-851. ISSN 1466433X

Kim, H J (2009) The effects of risk attitude on competitive success in the construction industry. PhD thesis, Texas A&M University, USA.

Kim, J (2007) An investigation of activity duration input modeling by duration variance ratio for simulation-based construction scheduling. PhD thesis, Rutgers The State University of New Jersey - New Brunswick, USA.

Kim, J H (2003) An approach to facilitate knowledge streams of occasional individual building industry clients at the pre-project stage. PhD thesis, University of Reading, UK.

Kistler, L (2024) Engineering team success: Evaluating perceptions of teamwork processes and emergent states effects on team outcomes. PhD thesis, Clemson University, USA.

Kiyang, S T and van Zyl, R (2014) Empirical investigation of wireless sensor network performance in noisy environments. Journal of Engineering, Design and Technology, 12(1), pp. 29-38. ISSN 1726-0531

Klopper, C H (1986) An investigation into and evaluation of the cost reimbursable basis for building contracts. DSc thesis, University of Pretoria, South Africa.

Kloukinas, D (2015) Neolithic building technology and the social context of construction practices: The case of Northern Greece. PhD thesis, Cardiff University, UK.

Knight, T and Boyd, D (2008) An investigation into how property developers use their social networks to drive development. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Koc, K and Gurgun, A P (2022) Ambiguity factors in construction contracts entailing conflicts. Engineering, Construction and Architectural Management, 29(5), pp. 1946-1964. ISSN 0969-9988

Kocaturk, T (2007) An investigation of the emerging knowledge in digital design from a multidisciplinary perspective. Architectural Engineering and Design Management, 3(2), pp. 93-105. ISSN 1745-2007

Koch, C (2018) Productivity measurement: The social construction of reduction through expansion. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Koehn, E and Brown, G (1985) Climatic effects on construction. Journal of Construction Engineering and Management, 111(2), pp. 129-137. ISSN 0733-9364

Koehn, E and Musser, K (1983) OSHA regulations effects on construction. Journal of Construction Engineering and Management, 109(2), pp. 233-244. ISSN 0733-9364

Kokkarinen, N; Shaw, A; Cullen, J; Pedrola, M O; Mason, A and Al-Shamma’a, A (2014) Investigation of audible carbon monoxide alarm ownership : Case study. Smart and Sustainable Built Environment, 3(1), pp. 72-86. ISSN 2046-6099

Konanahalli, A; Oyedele, L; von Meding, J K; Spillane, J and Coates, R (2012) International projects and cross-cultural adjustments of British expatriates in middle East: A qualitative investigation of influencing factors. Construction Economics and Building, 12(3), pp. 31-54. ISSN 2204-9029

Konanahalli, A and Oyedele, L O (2016) Emotional intelligence and British expatriates' cross-cultural adjustment in international construction projects. Construction Management and Economics, 34(11), pp. 751-768. ISSN 01446193

Kongsmobath, B (2021) Enterprise risk management and board decision making: context of Laos construction and tourism industry. PhD thesis, University of the West of Scotland, UK.

Kono, J (2018) Improving the sustainability performance of building materials: An approach from life cycle thinking. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Koo, Hyun Jeong (2021) Building design quality: Design complexity and BIM applications. Doctor thesis, University of Texas at Austin, USA.

Kor, M; Yitmen, I and Alizadehsalehi, S (2023) An investigation for integration of deep learning and digital twins towards construction 4.0. Smart and Sustainable Built Environment, 12(3), pp. 461-487. ISSN 2046-6099

Koranteng, C; Simons, B and Essel, C (2019) Climate responsive buildings: A comfort assessment of buildings on KNUST campus, Kumasi. Journal of Engineering, Design and Technology, 17(5), pp. 862-877. ISSN 1726-0531

Korstanje, M E (2014) Chile helps Chile: Exploring the effects of earthquake Chile 2010. International Journal of Disaster Resilience in the Built Environment, 5(4), pp. 380-390. ISSN 1759-5916

Kosaner, Y (1979) A study of industrialised building systems with special reference to Turkey. PhD thesis, University of Manchester, UK.

Kose, I. and Gumusburun Ayalp, G. (2026) Transformative impacts of technological developments on architectural education: A holistic scientometric analysis. Engineering, Construction and Architectural Management, 33(5), pp. 3542-3575. ISSN 0969-9988

Kotzé, M and Nkado, R N (2001) An investigation into the use of facilities management in institutions of higher learning in South Africa. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Kula, B and Ergen, E (2021) Implementation of a BIM-FM platform at an international airport project: Case study. Journal of Construction Engineering and Management, 147(4): 05021002, ISSN 0733-9364

Kululanga, G K (1999) A framework to facilitate construction contractors' learning. PhD thesis, Loughborough University, UK.

Kululanga, G K; Price, A D F and McCaffer, R (2002) Empirical investigation of construction contractors' organizational learning. Journal of Construction Engineering and Management, 128(5), pp. 385-391. ISSN 0733-9364

Kumar, R (2020) Risk management framework for construction projects aligned to actualities. PhD thesis, Indian Institute of Technology Delhi, India.

Kumar Singla, H (2019) A comparative analysis of long-term performance of construction and non-construction IPOs in India: A panel data investigation. Engineering, Construction and Architectural Management, 26(10), pp. 2447-2473. ISSN 0969-9988

Kumaraswamy, M M (1997) Productivity matters. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Kumaraswamy, M M (1998) Industry development through creative project packaging and integrated management. Engineering, Construction and Architectural Management, 5(3), pp. 228-237. ISSN 0969-9988

Kumaraswamy, M M and Chan, D W M (1995) Determinants of construction duration. Construction Management and Economics, 13(3), pp. 209-217. ISSN 01446193

Kumaraswamy, M M and Chan, D W M (1998) Contributors to construction delays. Construction Management and Economics, 16(1), pp. 17-29. ISSN 01446193

Kumaraswamy, M M and Chan, D W M (1999) Factors facilitating faster construction. Journal of Construction Procurement, 5(2), pp. 88-98. ISSN 1358-9180

Kumaraswamy, M M and Dissanayaka, S M (1996) Procurement by objectives. Journal of Construction Procurement, 2(2), pp. 38-51. ISSN 1358-9180

Kuo, Vincent (2019) Latent semantic analysis for knowledge management in construction. DSc(Tech) thesis, Aalto University, Finland.

Kuoribo, E; Amoah, P; Kissi, E; Edwards, D J; Gyampo, J A and Thwala, W D (2024) Analysing the effect of multicultural workforce/teams on construction productivity. Journal of Engineering, Design and Technology, 22(3), pp. 969-990. ISSN 1726-0531

Kusi, E; Boateng, I and Danso, H (2025) Energy consumption and carbon emission of conventional and green buildings using building information modelling (BIM). International Journal of Building Pathology and Adaptation, 43(4), pp. 826-854. ISSN 2398-4708

Kwok, C; Young, R J and Kirkham, R J (2010) Risk and asset management in privatization/private finance of public utiliities: A risk investigation of water infrastructure projects in China. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Kölsch, P (2019) Hygrothermal simulation of cathedral ceiling roofs with ventilated roofing tiles. International Journal of Building Pathology and Adaptation, 37(4), pp. 473-487. ISSN 23984708

Labib, Y A M (2017) Lean framework for assessing construction logistics in Jordan. PhD thesis, University of Salford, UK.

Lam, T Y M and Gale, K S (2026) Construction framework process: A qualitative investigation of behaviour change drivers and project outcomes. Construction Innovation, 26(1), pp. 83-96. ISSN 1471-4175

Lam, E W M; Chan, A P C and Chan, D W M (2008) Determinants of successful design-build projects. Journal of Construction Engineering and Management, 134(5), pp. 333-341. ISSN 0733-9364

Lam, E W M; Chan, A P C; Olawumi, T O; Wong, I and Kazeem, K O (2024) Sustainability concepts in global high-rise residential buildings: A scientometric and systematic review. Smart and Sustainable Built Environment, 13(2), pp. 425-443. ISSN 2046-6099

Lam, H-C R (2003) An investigation into the implementation of safety management systems by Hong Kong construction contractors. PhD thesis, University of Hong Kong, Hong Kong.

Lam, K C; Cheung, S O; Tang, C M and Ng, S T (2002) Capital budgeting evaluation practices of building contractors in Hong Kong. Construction Economics and Building, 2(1), pp. 81-93. ISSN 2204-9029

Lam, K C; Wang, D and Lam, M C K (2008) Practices of Hong Kong building contractors in strategic asset allocation process: Longitudinal approach. Journal of Financial Management of Property and Construction, 13(3), pp. 176-186. ISSN 1366-4387

Lam, P T I (2004) An investigation into the use of specifications in procuring construction works. Journal of Construction Procurement, 10(2),

Lam, T Y M (2022) Driving sustainable construction development through post-contract key performance indicators and drivers. Smart and Sustainable Built Environment, 11(3), pp. 483-499. ISSN 2046-6099

Lam, T Y M and Gale, K S (2023) A performance-driving model for public-sector construction framework procurement in England. Built Environment Project and Asset Management, 13(6), pp. 781-798. ISSN 2044-124X

Lamptey, T; De-Graft, O-M; Acheampong, A; Adesi, M and Ghansah, F A (2021) A framework for the adoption of green business models in the Ghanaian construction industry. Smart and Sustainable Built Environment, 10(3), pp. 536-553. ISSN 2046-6099

Langford, D A; Kennedy, P; Conlin, J and McKenzie, N (2003) Comparison of construction costs on motorway projects using measure and value and alternative tendering initiative contractual arrangements. Construction Management and Economics, 21(8), pp. 831-840. ISSN 01446193

Langston, C (2013) The role of coordinate-based decision-making in the evaluation of sustainable built environments. Construction Management and Economics, 31(1), pp. 62-77. ISSN 1466433X

Langston, C (2013) The application of data envelopment analysis to the benchmarking of construction performance in Australian and American high-rise buildings. International Journal of Construction Management, 13(3), pp. 55-75. ISSN 1562-3599

Lapinski, A R; Horman, M J and Riley, D R (2006) Lean processes for sustainable project delivery. Journal of Construction Engineering and Management, 132(10), pp. 1083-1091. ISSN 0733-9364

Larsson, B; Sundqvist, J and Emmitt, S (2006) Component manufacturers' perceptions of managing innovation. Building Research & Information, 34(6), pp. 552-564. ISSN 0961-3218

Larsson, J; Eriksson, P E; Olofsson, T and Simonsson, P (2014) Industrialized construction in the Swedish infrastructure sector: Core elements and barriers. Construction Management and Economics, 32(1-2), pp. 83-96. ISSN 01446193

Laryea, S (2011) Quality of tender documents: Case studies from the UK. Construction Management and Economics, 29(3), pp. 275-286. ISSN 1466433X

Laryea, S and Lubbock, A (2014) Tender pricing environment of subcontractors in the United Kingdom. Journal of Construction Engineering and Management, 140(1): 04013029, ISSN 0733-9364

Laryea, S A and Hughes, W P (2006) The price of risk in construction projects. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Lather, J I (2019) A hybrid modeling approach using discrete event simulation and layout optimization for healthcare layout planning problems. PhD thesis, Pennsylvania State University, USA.

Laufer, A (1980) Assessment of financial incentive programs for the construction labor force: A Delphi analysis. PhD thesis, University of Texas at Austin, USA.

Lavers, A P (1986) Professional negligence in the property-related professions. PhD thesis, National University of Singapore, Singapore.

Law, M D (2005) An investigation into the utilization of cost variance along with information technology by Pennsylvania home building firms. PhD thesis, Pennsylvania State University, USA.

Lawani, A (2018) Investigating project management practice in Nigerian government construction organisations: a systems thinking approach. PhD thesis, Robert Gordon University, UK.

Lawani, A and Moore, D R (2021) Propositions for utilising emotional intelligence in construction organisations. International Journal of Construction Management, 21(2), pp. 153-166. ISSN 1562-3599

Lawani, K; Hare, B; Cameron, I and Soto, L M I (2020) Exploring the impact of alcohol abuse on construction sites in Santo Domingo, Dominican Republic. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Lawther, P M (2000) Predictive cost modelling: Investigation utilising a qualitatively biased research methodology. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Lazarski, A (2014) The importance of contextual factors on the accuracy of estimates in project management: An emergence of a framework for more realistic estimation process. PhD thesis, University of Bradford, UK.

Lee, A (2002) The development of a project process evaluation (PPE) framework that aims to measure the effectiveness of implementing a new design and construction project process. PhD thesis, University of Salford, UK.

Lee, C K; Yiu, T W and Cheung, S O (2021) Predicting intention to use alternative dispute resolution (ADR): An empirical test of theory of planned behaviour (TPB) model. International Journal of Construction Management, 21(1), pp. 27-40. ISSN 1562-3599

Lee, C Y-H (2010) A probabilistic approach to the life-cycle cost assessment of preventive maintenance strategies on flexible pavements. PhD thesis, University of California, Davis, USA.

Lee, F K S (2016) Construction contractor selection criteria: the effects of relational norms, price and prequalification. PhD thesis, University of Reading, UK.

Lee, J M (2010) Automated checking of building requirements on circulation over a range of design phases. PhD thesis, Georgia Institute of Technology, USA.

Lee, K R and Fenn, P (2007) Investigation of critical factors affecting successful mediation: Korean mediation users perspectives. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Lee, N and Rojas, E M (2013) Visual representations for monitoring project performance: Developing novel prototypes for improved communication. Journal of Construction Engineering and Management, 139(8), pp. 994-1005. ISSN 0733-9364

Lee, S; Peña-Mora, F and Park, M (2006) Reliability and stability buffering approach: Focusing on the issues of errors and changes in concurrent design and construction projects. Journal of Construction Engineering and Management, 132(5), pp. 452-464. ISSN 0733-9364

Lee, T S (1990) Detection of collusion in highway construction contract bidding. PhD thesis, University of Wisconsin - Madison, USA.

Lee, Z P; Rahman, R A and Doh, S I (2021) Key drivers for adopting design-build in public construction projects: Malaysian perspective. Journal of Construction in Developing Countries, 26(1), pp. 131-160. ISSN 1823-6499

Lefebvre, G (2009) The influence of the psychological characteristics of the team members on construction project performance. PhD thesis, University of Salford, UK.

Legnér, M; Leijonhufvud, G and Tunefalk, M (2020) Energy policy and conservation planning in Sweden: A longitudinal evaluation. International Journal of Building Pathology and Adaptation, 38(4), pp. 555-572. ISSN 23984708

Leicht, R M; Hunter, S T; Saluja, C and Messner, J I (2010) Implementing observational research methods to study team performance in construction management. Journal of Construction Engineering and Management, 136(1), pp. 76-86. ISSN 0733-9364

Lertpaitoonpan, W (2000) Bridge damage detection using a system identification method. PhD thesis, University of Florida, USA.

Leung, M Y; Chan, Y S I and Dongyu, C (2011) Structural linear relationships between job stress, burnout, physiological stress, and performance of construction project managers. Engineering, Construction and Architectural Management, 18(3), pp. 312-328. ISSN 0969-9988

Leung, M Y; Olomolaiye, P; Chong, A and Lam, C C Y (2005) Impacts of stress on estimation performance in Hong Kong. Construction Management and Economics, 23(9), pp. 891-903. ISSN 01446193

Leung, M-y and Yu, R K T (2003) An investigation of conflict resolution in the construction industry. Journal of Construction Procurement, 9(1), ISSN 1358-9180

Lew, Y L; Hassim, S; Muniandy, R and Hua, L T (2018) Structural equation modelling for subcontracting practice: Malaysia chapter. Engineering, Construction and Architectural Management, 25(7), pp. 835-860. ISSN 0969-9988

Lewis, N S (2023) Development of an open-source methodology for simulation of civil engineering structures subject to multi-hazards. PhD thesis, University of Washington, USA.

Lewis, T M (2004) The construction industry in the economy of Trinidad and Tobago. Construction Management and Economics, 22(5), pp. 541-549. ISSN 01446193

Li, D (2012) Development of a framework of competitive advantage in non-state construction contractors in China. PhD thesis, University of Leeds, UK.

Li, H; Shen, L Y and Love, P E D (1999) Ann-based mark-up estimation system with self-explanatory capacities. Journal of Construction Engineering and Management, 125(3), pp. 185-189. ISSN 0733-9364

Li, J; Zhu, J and Guan, C (2024) Mitigating fatigue in tunnel construction through illumination: Evidence from virtual reality. Journal of Construction Engineering and Management, 150(11): 04024165, ISSN 0733-9364

Li, J J (2023) A socio-technical framework to guide implementation and value realisation of distributed ledger technologies (DLT) in the construction sector. PhD thesis, Northumbria University, UK.

Li, S (1998) An investigation of the build operate transfer approach for infrastucture works in the People's Republic of China. PhD thesis, University of Reading, UK.

Li, S and Liu, M (2023) Reasonable kitchen space for urban residences: Based on an investigation in Beijing. Building Research & Information, 51(8), pp. 881-896. ISSN 0961-3218

Li, Y (2021) An investigation of organizational control in design consulting projects: behavioural consequences and motivational mechanisms. PhD thesis, University of Hong Kong, Hong Kong.

Li, Y; Ning, Y; Rowlinson, S and Abankwa, D A (2019) Control modes and intensity in design consulting projects: Professionals as agents. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Li-Hua, R (2001) Technology transfer in international joint venture projects in China. PhD thesis, University of Northumbria at Newcastle, UK.

Liang, Y; Sun, H; Chen, M and Liu, J (2021) Research on fraudulent, corrupt and collusive practices in infrastructure projects. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Lindblad, H and Karrbom Gustavsson, T (2021) Public clients ability to drive industry change: The case of implementing BIM. Construction Management and Economics, 39(1), pp. 21-35. ISSN 01446193

Lindebaum, D (2008) Trait emotional intelligence, transformational leadership and performance in the UK construction industry. PhD thesis, University of Manchester, UK.

Lingard, H.; Cooke, T. and Gharaie, E. (2013) A case study analysis of fatal incidents involving excavators in the Australian construction industry. Engineering, Construction and Architectural Management, 20(5), pp. 488-504. ISSN 0969-9988

Lingard, H; Cooke, T and Gharaie, E (2013) The how and why of plant-related fatalities in the Australian construction industry. Engineering, Construction and Architectural Management, 20(4), pp. 365-380. ISSN 0969-9988

Lingard, H and Francis, V (2005) The decline of the 'traditional' family: Work-life benefits as a means of promoting a diverse workforce in the construction industry of Australia. Construction Management and Economics, 23(10), pp. 1045-1057. ISSN 01446193

Liow, K H (1998) An empirical investigation of corporate growth of property companies. Journal of Financial Management of Property and Construction, 3(3), pp. 5-16. ISSN 1366-4387

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Liu, G.; Qin, Z.; Wu, H.; Jia, L. and Zhuo, J. (2026) Optimizing process efficiency in prefabricated building supply chain: The role of hybrid governance behaviors in reducing transaction costs. Engineering, Construction and Architectural Management, 33(5), pp. 3820-3842. ISSN 0969-9988

Liu, C; M.E. Sepasgozar, S; Shirowzhan, S and Mohammadi, G (2022) Applications of object detection in modular construction based on a comparative evaluation of deep learning algorithms. Construction Innovation, 22(1), pp. 141-159. ISSN 1471-4175

Liu, D (2009) Multi-phase empirical investigation and path modeling of construction workers' use of personal fall arrest systems. PhD thesis, Ohio State University, USA.

Liu, H; Yu, Y; Sun, Y and Yan, X (2021) A system dynamic approach for simulation of a knowledge transfer model of heterogeneous senders in mega project innovation. Engineering, Construction and Architectural Management, 28(3), pp. 681-705. ISSN 0969-9988

Liu, J and Lu, M (2020) Synchronized optimization of various management-function schedules in a multiproject environment: Case study of planning steel girder fabrication projects in bridge construction. Journal of Construction Engineering and Management, 146(5): 05020002, ISSN 0733-9364

Liu, J; Shahi, A; Haas, C T; Goodrum, P and Caldas, C H (2014) Validation methodologies and their impact in construction productivity research. Journal of Construction Engineering and Management, 140(10): 04014046, ISSN 0733-9364

Liu, L (2017) A systematic approach for major renovation of residential buildings. PhD thesis, Linköping University, Sweden.

Liu, Margaret Ze-Yu (2016) Energy efficiency retrofits of tertiary education buildings: An investigation of case studies in New South Wales. PhD thesis, University of Sydney, Australia.

Liu, N (2010) Analysing functionalities of project extranets in construction: a provision and requirement approach. PhD thesis, University of Salford, UK.

Liu, N; Ruan, L; Jin, R; Chen, Y; Deng, X and Yang, T (2019) Investigation of individual perceptions towards BIM implementation-a Chongqing case study. Engineering, Construction and Architectural Management, 26(7), pp. 1455-1475. ISSN 0969-9988

Liu, S (2016) An investigation of how information processing impacts boundary spanning activities in managing construction design changes from the perspective of contractors. PhD thesis, University of Hong Kong, Hong Kong.

Liu, S S and Wang, C J (2009) Two-stage profit optimization model for linear scheduling problems considering cash flow. Construction Management and Economics, 27(11), pp. 1023-1037. ISSN 1466433X

Liu, T and Wilkinson, S (2011) Adopting innovative procurement techniques: Obstacles and drivers for adopting public private partnerships in New Zealand. Construction Innovation, 11(4), pp. 452-469. ISSN 1471-4175

Liu, T and Wilkinson, S (2013) Can the pilot public-private partnerships project be applied in future urban rail development? A case study of Beijing Metro Line 4 project. Built Environment Project and Asset Management, 3(2), pp. 250-263. ISSN 2044-124X

Liu, Y (2023) Worker-centric human-robot co-adaptation in construction. PhD thesis, Pennsylvania State University, USA.

Liu, Y; Habibnezhad, M; Shayesteh, S; Jebelli, H and Lee, S (2021) Paving the way for future EEG studies in construction: Dependent component analysis for automatic ocular artifact removal from brainwave signals. Journal of Construction Engineering and Management, 147(8), ISSN 0733-9364

Liu, Yu Ming (2005) A holistic approach to developing generic vs. regionally specific frameworks for sustainable building tools. PhD thesis, University of New South Wales, Australia.

Liyanawatta, T N; Francis, M and Ranadewa, K A T O (2024) Avoiding construction disputes: A comprehensive framework for pre-contract planning. International Journal of Construction Management, 24(12), pp. 1282-1294. ISSN 1562-3599

Lockley, E E (1998) Forensic engineering investigation into construction failures and their documentation. PhD thesis, Polytechnic University, USA.

Lombard, P C (1991) The relationship between highway infrastructure and regional economic development. PhD thesis, Purdue University, USA.

London, K (2010) Multi-market industrial organizational economic models for the internationalization process by small and medium enterprise construction design service firms. Architectural Engineering and Design Management, 6(2), pp. 132-152. ISSN 1745-2007

Long, G (2010) A detailed investigation of the applicability and utility of simulation and gaming in the teaching of civil engineering students. PhD thesis, University of Nottingham, UK.

Loosemore, M (1995) Reactive management: Communication and behavioural issues in dealing with the occurrence of client risks. Construction Management and Economics, 13(1), pp. 65-80. ISSN 01446193

Loosemore, M (1996) Crisis management in building projects: a longitudinal investigation of communication and behaviour patterns within a grounded theory framework. PhD thesis, University of Reading, UK.

Loosemore, M (1999) A grounded theory of construction crisis management. Construction Management and Economics, 17(1), pp. 9-19. ISSN 01446193

Loosemore, M and Lam, A S Y (2004) The locus of control: A determinant of opportunistic behaviour in construction health and safety. Construction Management and Economics, 22(4), pp. 385-394. ISSN 01446193

Loosemore, M; Nguyen, B T and Denis, N (2000) An investigation into the merits of encouraging conflict in the construction industry. Construction Management and Economics, 18(4), pp. 447-456. ISSN 01446193

Loosemore, M and Tan, C C (2000) Occupational stereotypes in the construction industry. Construction Management and Economics, 18(5), pp. 559-566. ISSN 01446193

Lopez Del Puerto, C and Shane, J S (2014) Keys to success in megaproject management in Mexico and the United States: Case study. Journal of Construction Engineering and Management, 140(4): B5013001, ISSN 0733-9364

Lord, A M (1989) An investigation into the role of the project manager: A comparative study of project leadership, organisation and culture in UK defence contractors and engineering constructors. PhD thesis, Henley Business School, UK.

Lordsleem Jr, A C and Melhado, S B (2014) Scope of design for production of wall partitions. Journal of Engineering, Design and Technology, 12(2), pp. 263-279. ISSN 1726-0531

Lou, E C W (2012) E-readiness in construction: readiness of UK construction organisations. PhD thesis, University of Salford, UK.

Love, P; Edwards, D and Wood, E (2011) Loosening the Gordian knot: The role of emotional intelligence in construction. Engineering, Construction and Architectural Management, 18(1), pp. 50-65. ISSN 0969-9988

Lowe, D J (1996) Experiental learning in design cost estimating. PhD thesis, University of Manchester, UK.

Lowe, D J; Emsley, M W and Harding, A (2006) Relationships between total construction cost and project strategic, site related and building definition variable. Journal of Financial Management of Property and Construction, 11(3), pp. 165-180. ISSN 1366-4387

Lowe, D J; Emsley, M W and Harding, A (2007) Relationships between total construction cost and design related variables. Journal of Financial Management of Property and Construction, 12(1), pp. 11-24. ISSN 1366-4387

Lozon, J P (2008) Evaluating value improving practices for large scale projects. PhD thesis, University of Calgary, Canada.

Lu, Na (2007) Investigation of designers' and general contractors' perceptions of offsite construction techniques in the United States construction industry. PhD thesis, Clemson University, USA.

Lu, S and Sexton, M G (2004) Appropriate research design for investigating innovation in small knowledge-intensive professional service firms. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Luciani, Paul J (2007) An investigation into the cycle and prediction of organisation facility management procurement. PhD thesis, University of Technology Sydney, Australia.

Lucke, T and Beecham, S (2010) Capacity loss in siphonic roof drainage systems due to aeration. Building Research & Information, 38(2), pp. 206-217. ISSN 0961-3218

Lucke, T and Beecham, S (2010) Aeration and gutter water levels in siphonic roof drainage systems. Building Research & Information, 38(6), pp. 670-685. ISSN 0961-3218

Lucke, T and Beecham, S (2011) Field investigation of clogging in a permeable pavement system. Building Research & Information, 39(6), pp. 603-615. ISSN 0961-3218

Lucke, T; Beecham, S and Qu, Y Y (2016) Estimating flow rates through individual outlets of siphonic roof drainage systems. Building Research & Information, 44(3), pp. 289-300. ISSN 0961-3218

Ludlow, J E (1976) Assessment and prediction of noise from construction sites. PhD thesis, University of Southampton, UK.

Luise Valencia Gluyas, J (2004) Public-private participation in water infrastructure in Mexico. PhD thesis, University of Leeds, UK.

Lukhele, T M (2023) A systematic risk management model for construction project management: a case study of the new infrastructure project in the University of Mpumalanga. PhD thesis, Nelson Mandela University, South Africa.

Luo, J; Zhang, H and Sher, W (2021) A mixed method for measuring incompatibilities between manufacturing approaches and off-site construction. Engineering, Construction and Architectural Management, 28(9), pp. 2516-2548. ISSN 0969-9988

Lv, Y; Feng, J; Wang, G and Li, H (2024) Stability characteristics and experiment of hydraulic drive four-wheel chassis. Journal of Engineering, Design and Technology, 22(2), pp. 598-612. ISSN 1726-0531

Lyu, K Y (1989) Internationalisation of Korean industry: A study of the performance of the plant and construction industry. PhD thesis, University of Manchester, UK.

Ma, G; Jiang, S and Wang, D (2022) Understanding the effects of social media use on construction project performance: A project manager's perspective. Engineering, Construction and Architectural Management, 29(1), pp. 551-570. ISSN 0969-9988

Ma, H; Liu, Z; Zeng, S; Lin, H and Tam, V W Y (2020) Does megaproject social responsibility improve the sustainability of the construction industry? Engineering, Construction and Architectural Management, 27(4), pp. 975-996. ISSN 0969-9988

Ma, H; Lv, K; Zeng, S; Lin, H and Shi, J J (2022) Climbing the pyramid of megaproject social responsibility: Impacts of external stakeholders and project complexity. Journal of Construction Engineering and Management, 148(11): 04022116, ISSN 0733-9364

Ma, Yunlong (2020) Holistic assessment of the impacts of building energy code improvements on Australian commercial buildings. PhD thesis, Queensland University of Technology, Australia.

MacAskill, K and Guthrie, P (2014) Application of sustainability principles in post-disaster reconstruction. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Mackenzie, D I (2010) A review of project controls in the UK and methodologies to improve the processes. DProf thesis, Teesside University, UK.

Madanayake, U H; Ayinla, K O and Saka, A B (2026) An investigation of learner types and their unique preferences on the work-based learning (wbl) model: A case of quantity surveying apprenticeship. Construction Management and Economics, 44(1), pp. 1-22. ISSN 0144-6193

Madanayake, U (2021) Digitalisation to improve organisational competitive advantage: a study on BBI exploitation. PhD thesis, London South Bank University, UK.

Maddah, R (2019) An analysis of risks faced by foreign construction firms in India and their effect on project performance. PhD thesis, Indian Institute of Technology Delhi, India.

Madter, N; Brookes, N J; Bower, D A and Hagan, G (2012) Exploring project management continuing professional development in engineering construction. Construction Management and Economics, 30(8), pp. 639-651. ISSN 1466433X

Maduka, N S (2017) The role of knowledge management in assisting key stakeholders in making informed decisions in delivering sustainable retrofitted building projects. PhD thesis, Northumbria University, UK.

Magdub, R H (2006) Application of the lump sum turnkey contracts in Libyan civil law with reference to English law and international practice. PhD thesis, Glasgow Caledonian University, UK.

Maghrebi, M; Travis Waller, S and Sammut, C (2014) Assessing the accuracy of expert-based decisions in dispatching ready mixed concrete. Journal of Construction Engineering and Management, 140(6): 6014004, ISSN 0733-9364

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Mahama, Habib (2000) The role of financial and non-financial information in the constitution and stabilisation of collaborative supply relationships. PhD thesis, University of New South Wales, Australia.

Mahamadu, A M; Mahdjoubi, L and Booth, C A (2014) Determinants of building information modelling (BIM) acceptance for supplier integration: A conceptual model. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Mahdiputra, Suyanto (2007) Organisational learning in UK construction companies. PhD thesis, Northumbria University, UK.

Mahdjoubi, L (2001) An investigation of computer-generated architectural representations on design decision-tasks. PhD thesis, University of Newcastle upon Tyne, UK.

Mahmood, A (1992) Educational interests and needs of owner-managers of small building firms. PhD thesis, Heriot-Watt University, UK.

Mahmoudi, E; Stepien, M and König, M (2021) Optimisation of geotechnical surveys using a BIM-based geostatistical analysis. Smart and Sustainable Built Environment, 10(3), pp. 420-437. ISSN 2046-6099

Maiti, S and Choi, J H (2021) Investigation and implementation of conflict management strategies to minimize conflicts in the construction industry. International Journal of Construction Management, 21(4), pp. 337-352. ISSN 1562-3599

Makabate, C T (2021) Investigating the adoption of building information modelling (BIM) within the small medium enterprises (SMEs) in contracting and consulting organisatios in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Makulsawatudom, A and Emsley, M (2001) Factors affecting the productivity of the construction industry in Thailand: The project managers' perception. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Malaki, M; Shou, W and Wang, J (2025) Psychological distress among male construction workers in Australia: A systematic analysis. International Journal of Construction Management, 25(15), pp. 1791-1799. ISSN 1562-3599

Malcomb, A P (2022) New universal law: Application of Tracy-Widom theory for construction network schedule resilience. PhD thesis, Catholic University of America, USA.

Male, S P (1984) A critical investigation of professionalism in quantity surveying. PhD thesis, Heriot-Watt University, UK.

Malhotra, M; Sahu, V; Srivastava, A and Misra, A K (2020) Experimental and numerical investigation of the effect of pre-existing utility tunnel on the bearing capacity of shallow footing in sandy soils. Journal of Engineering, Design and Technology, 18(3), pp. 513-529. ISSN 1726-0531

Mamantzis, Dimitrios E (2005) Successful project leadership: An analysis of the Greek construction market. PhD thesis, University College London, UK.

Mambwe, M; Mwanaumo, E M; Phiri, F and Chabota, K (2020) The construction subcontracting policy framework for developing local contractors capacities in Zambia. Journal of Construction Business and Management, 4(1), pp. 60-70. ISSN 2521-0165

Mandal, S (2017) An empirical competence-capability model of supply chain resilience. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 190-208. ISSN 1759-5916

Mandal, S; Bhattacharya, S; Korasiga, V R and Sarathy, R (2017) The dominant influence of logistics capabilities on integration: Empirical evidence from supply chain resilience. International Journal of Disaster Resilience in the Built Environment, 8(4), pp. 357-374. ISSN 1759-5916

Manewa, R M A S (2012) Economic considerations for adaptability in buildings. PhD thesis, Loughborough University, UK.

Mangvwat, J S and Spillane, J P (2021) Social sustainability in procurement of construction projects: A literature review from a Nigerian perspective. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Manoliadis, O; Tsolas, I and Nakou, A (2006) Sustainable construction and drivers of change in Greece: A Delphi study. Construction Management and Economics, 24(2), pp. 113-120. ISSN 01446193

Mansell, P R (2021) Measuring infrastructure projects sustainable development goals impact (MISI). PhD thesis, London South Bank University, UK.

Manu, P A (2012) An investigation into the accident causal influence of construction project features. PhD thesis, University of Wolverhampton, UK.

Maqsood, T; Walker, D H T and Finegan, A (2004) Project histories and project learning: A knowledge management challenge. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Maqsood, Tayyab (2006) Role of knowledge management in supporting innovation and learning in construction. PhD thesis, RMIT University, Australia.

Maqsoom, A; Hamad, M; Ashraf, H; Thaheem, M J and Umer, M (2020) Managerial control mechanisms and their influence on project performance: An investigation of the moderating role of complexity risk. Engineering, Construction and Architectural Management, 27(9), pp. 2451-2475. ISSN 0969-9988

Maradza, E N (2015) Adaptation of industry BIM process standards in a large construction firm. PhD thesis, University of Reading, UK.

Marasini, R and Quinnell, P (2010) Investigation of quality management practices in building construction sites in the UK. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Marchi, L; Susca, T; Benedetti, M; Antonini, E and Gaspari, J (2025) From waste to thermal insulation for buildings: An investigation of potentialities in the Italian context. Building Research & Information, 53(6), pp. 777-796. ISSN 0961-3218

Marey Madi, H A (2024) Sustainability assessment of using green concrete materials for residential buildings in Egypt. PhD thesis, Debreceni Egyetem, Hungary.

Marguet, N; Ross, A and Johnson, D (2009) Developing supply chain procurement systems in social housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Markus, A M (1988) A research discrepancy model for building trades training programs. PhD thesis, University of Florida, USA.

Marques, C P (2004) Selected issues in business and contractual relationships in private construction projects in Canada/China deals. PhD thesis, University of Calgary, Canada.

Marston, V K (1985) Interdependence of the functional element costs of buildings. PhD thesis, University of Portsmouth, UK.

Martek, I and Chen, C (2013) Localization typologies evident among foreign enterprises active in the Chinese construction market. Journal of Construction Engineering and Management, 139(10): 04013001, ISSN 0733-9364

Martek, Igor (2012) Localization patterns amongst foreign enterprises active in the Chinese construction industry. PhD thesis, University of Melbourne, Australia.

Martin, H; Lewis, T; Peters, E and Petersen, A (2017) Construction project delivery cloud decisionsupport model. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(1), pp. 6-26. ISSN 17514304

Marton, J and Richter, A (2004) In search of safety on construction sites -implications of culture, organizational structures and structural change on safety. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Marzouk, M and Hassouna, M (2019) Quality analysis using three-dimensional modelling and image processing techniques. Construction Innovation, 19(4), pp. 614-628. ISSN 1471-4175

Masitenyane, L A (2020) Dimensions and outcomes of buyer-seller relationship intentions for concrete products in the construction environment. DTech thesis, Vaal University of Technology, South Africa.

Mason, J R (2007) The views and experiences of specialist contractors on partnering in the UK. Construction Management and Economics, 25(5), pp. 519-527. ISSN 1466433X

Masterman, J W E (1994) A study of the bases upon which clients of the construction industry choose their building procurement systems. PhD thesis, University of Manchester, UK.

Mathew, S A; Tran, D Q and Nguyen, P H D (2021) Evaluation of cost growth factors in design-build highway projects using structural equation modeling. Journal of Construction Engineering and Management, 147(7): 04021070, ISSN 0733-9364

Mathur, R N (1986) Perception of quality of working life and the related factors: a study of women workers in construction industry. PhD thesis, Indian Institute of Technology Delhi, India.

Matthews, J C and Stowe, R (2015) Critical data needs associated with asbestos cement pipe renewal methods. Journal of Construction Engineering and Management, 141(1): 06014009, ISSN 0733-9364

Matthews, J D (1996) A project partnering approach to the main contractor - sub contractor relationship. PhD thesis, Loughborough University, UK.

Maull, W M (1998) An investigation into the development of engineering students' conceptual understanding of mathematics. PhD thesis, University of Plymouth, UK.

Maurya, K K and Biswas, A (2021) Performance assessment of governance in Indian smart city development. Smart and Sustainable Built Environment, 10(4), pp. 653-680. ISSN 2046-6099

Mawdesley, M J; Askew, W H and Al-Jibouri, S H (2004) Site layout for earthworks in road projects. Engineering, Construction and Architectural Management, 11(2), pp. 83-89. ISSN 0969-9988

Mayouf, M; Gerges, M and Cox, S (2019) 5D BIM: an investigation into the integration of quantity surveyors within the BIM process. Journal of Engineering, Design and Technology, 17(3), pp. 537-553. ISSN 1726-0531

Maytorena Sanchez, Eunice S (2003) Building conversion process: a cognitive exploration. PhD thesis, University College London, UK.

Mazari, M (2014) Studying the parameters involved with modulus-based construction quality control for compaction of unbound pavement layers. PhD thesis, University of Texas at El Paso, USA.

Mbabu, Alex (2025) Digital twins in lean strategic facility management in the UK healthcare sector: A proposed framework to enabling lean strategic facility management in healthcare operations in the UK. PhD thesis, University of Salford, UK.

Mbachu, J and Nkado, R (2007) Factors constraining successful building project implementation in South Africa. Construction Management and Economics, 25(1), pp. 39-54. ISSN 1466433X

McCord, M; Davis, P; McCord, J; Haran, M and Davison, K (2020) An exploratory investigation into the relationship between energy performance certificates and sales price: A polytomous universal model approach. Journal of Financial Management of Property and Construction, 25(2), pp. 247-271. ISSN 1366-4387

McCord, M; Davis, P T; Haran, M; McGreal, S and McIlhatton, D (2012) Spatial variation as a determinant of house price: Incorporating a geographically weighted regression approach within the Belfast housing market. Journal of Financial Management of Property and Construction, 17(1), pp. 49-72. ISSN 1366-4387

McDermot, E; Agdas, D; Rodríguez Díaz, C R; Rose, T and Forcael, E (2022) Improving performance of infrastructure projects in developing countries: An ecuadorian case study. International Journal of Construction Management, 22(13), pp. 2469-2483. ISSN 1562-3599

McErlane, A; Haran, M; McClements, S and McCord, J (2018) Modelling the drivers for public-private partnerships (PPP) provision of United Kingdom (UK) social infrastructure. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

McErlane, A; Heaney, G; Haran, M and McClements, S (2016) The application of stakeholder theory to UK PPP stakeholders. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

McGill, G; Oyedele, L O and McAllister, K (2015) An investigation of indoor air quality, thermal comfort and sick building syndrome symptoms in UK energy efficient homes. Smart and Sustainable Built Environment, 4(3), pp. 329-348. ISSN 2046-6099

McKay, L J; Gibb, A G F; Haslam, R and Pendlebury, M (2002) Implications for the effect of standardization and pre-assembly on health, safety and accident causality: Preliminary results. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

McLain, K; Gransberg, D and Loulakis, M (2014) Managing geotechnical risk on us design-build transport projects. Construction Economics and Building, 14(1), pp. 1-19. ISSN 2204-9029

McLaren, Matthew (2018) An investigation of swift trust formation in disaster management teams. PhD thesis, University of New South Wales, Australia.

McMahon, E; Spillane, J P and Bradley, J G (2022) Factors influencing built environment apprenticeship completion rates: A systematic literature review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

McMahon, E; Spillane, J P and Bradley, J G (2023) The challenge of comparing apprenticeship completion rates: An international review of terminology. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

McMahon, E; Spillane, J P and Bradley, J G (2023) When enough is not enough! Evaluating the minimum entry requirements for apprenticeships in Ireland. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

McMeel, D (2009) The artistry of construction: an investigation into construction as a creative process and the influence of mobile phones within domestic scale construction projects. PhD thesis, University of Edinburgh, UK.

McNamara, A J; Shirowzhan, S and M.E. Sepasgozar, S (2024) Investigating the determents of intelligent construction contract adoption: A refinement of the technology readiness index to inform an integrated technology acceptance model. Construction Innovation, 24(3), pp. 702-724. ISSN 1471-4175

McNamara, E T; Howarth, T A P; Hill, C J and Stoneman, G R W (1997) Mentoring construction graduates: Bridging the gap between academia and industry. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Meadati, P K (2007) Integration of construction process documents into building information modeling. PhD thesis, University of Nebraska - Lincoln, USA.

Megahed, N (2018) Reflections on studio-based learning: Assessment and critique. Journal of Engineering, Design and Technology, 16(1), pp. 63-80.

Memecan, S (1983) A theoretical framework for technology of building. PhD thesis, University of Pennsylvania, USA.

Memon, S A (2017) Hong Kong relational contracting : an investigation into the attitudes and behaviours of contractors' project teams. PhD thesis, University of Hong Kong, Hong Kong.

Men, Y (2023) Investigation into sustainable solutions for improving small and medium sized museums in China. PhD thesis, De Montfort University, UK.

Menches, C L (2006) Effect of pre-construction planning on electrical project performance. PhD thesis, University of Wisconsin - Madison, USA.

Mendes, J R; Fernando, L; Heineck, M and Vaca, O L (1998) New applications of line of balance on scheduling of multi-storey buildings. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Meng, X and Brown, A (2018) Innovation in construction firms of different sizes: Drivers and strategies. Engineering, Construction and Architectural Management, 25(9), pp. 1210-1225. ISSN 0969-9988

Meng X, H F (2013) The application of whole life costing in PFI/PPP projects. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Mengistu, D G; Beyene, M M and Wudineh, T A (2024) Public procurement practice to enhance technology and innovation development in Ethiopian construction industry. International Journal of Construction Management, 24(10), pp. 1145-1154. ISSN 1562-3599

Menoka, B (2014) Stakeholder engagement and sustainability-related project performance in construction. PhD thesis, Liverpool John Moores University, UK.

Messner, J I (1994) An information framework for evaluating international construction projects. PhD thesis, Pennsylvania State University, USA.

Meyer, H W G (1991) Conceptual model for integrating business activity and data systems in the AEC industry. PhD thesis, University of Wisconsin - Madison, USA.

Milberg, C T (2006) Application of tolerance management to civil systems. PhD thesis, University of California, Berkeley, USA.

Milion, R N; Alves, T d C L and Paliari, J C (2017) Impacts of residential construction defects on customer satisfaction. International Journal of Building Pathology and Adaptation, 35(3), pp. 218-232.

Milion, Raphael Negri (2019) Method for managing defects in residential buildings. PhD thesis, Universidade Federal de São Carlos, Brazil.

Miller, C J M (2000) An empirical investigation of small construction enterprises in South Wales. Unpublished PhD thesis, University of Glamorgan, UK.

Miller, K S (1988) The causes of decentralization of the bargaining structure in the construction industry in the state of Ohio. PhD thesis, Ohio State University, USA.

Miller, M L and Bernold, L E (1991) Sensor-integrated nailing for building construction. Journal of Construction Engineering and Management, 117(2), pp. 213-225. ISSN 0733-9364

Milner, A J (2019) Subcontracts in the UK construction industry: an investigation into the root causes of disputes. PhD thesis, University of Salford, UK.

Minato, T (2004) Representing causal mechanism of defective designs: Exploration through case studies. Construction Management and Economics, 22(2), pp. 183-192. ISSN 01446193

Mirshekarlou, B R (2018) An investigation of material waste management in prefabricated construction industry and developing an integrated waste management tool. PhD thesis, Middle East Technical University, Turkey.

Mirzaei, Z (2015) An investigation of methodologies to determine the most sustainable bridge work programs. DSc thesis, ETH Zürich, Switzerland.

Missa, P (2013) An investigation of the underrepresentation of BMEs in the UK construction industry. PhD thesis, University of Salford, UK.

Mitikie, B B and Lee, T S (2019) Experimental investigation of enzyme stabilization and its effect on clay brick. Journal of Construction Engineering and Management, 145(4): 04019012, ISSN 0733-9364

Mitropoulos, P and Cupido, G (2009) Safety as an emergent property: Investigation into the work practices of high-reliability framing crews. Journal of Construction Engineering and Management, 135(5), pp. 407-415. ISSN 0733-9364

Mitropoulos, P and Tatum, C B (2000) Forces driving adoption of new information technologies. Journal of Construction Engineering and Management, 126(5), pp. 340-348. ISSN 0733-9364

Miura, K (2017) International joint ventures in the US military construction programs in Japan: An exploratory case study investigation. PhD thesis, Northcentral University, USA.

Mlecnik, E (2013) Innovation development for highly energy-efficient housing: Opportunities and challenges related to the adoption of passive houses. PhD thesis, Delft University of Technology, Netherlands.

Mlitwa, N W B and Wanyonyi, D W (2015) Towards interactive open source based m-Learning solution: The m-Chisimba framework. Journal of Engineering, Design and Technology, 13(3), pp. 463-485.

Mo, Y; Dainty, A and Price, A (2007) An assessment of the emotional intelligence of construction students: An empirical investigation. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Moaveni, B (2007) System and damage identification of civil structures. PhD thesis, University of California, San Diego, USA.

Mobus, M A C (2011) The Burford Masons and the changing world of building practice in England, 1630-1730. PhD thesis, Open University, UK.

Moe, T L (2012) Aiming for resilience and adaptation in managing environment: An emerging environmental and emergency leadership in the twenty-first century. International Journal of Disaster Resilience in the Built Environment, 3(1), pp. 42-51. ISSN 1759-5916

Moehler, R C; Chan, P W and Greenwood, D (2008) The interorganisational influences on construction skills development in the UK. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Mogaji, I J; Mewomo, M C and Bondinuba, F K (2024) Assessment of barriers to the adoption of innovative building materials (IBM) for sustainable construction in the Nigerian construction industry. Engineering, Construction and Architectural Management, 32(13), pp. 1-26. ISSN 0969-9988

Mohamed, I F; Edwards, D J; Mateo-Garcia, M; Costin, G and Thwala, W D D (2020) An investigation into the construction industry's view on fire prevention in high-rise buildings post Grenfell. International Journal of Building Pathology and Adaptation, 38(3), pp. 451-471. ISSN 23984708

Mohammed, Miswan Abdul Hakim (1994) An investigation into firms' strategies and their financial performance in the UK construction industry. PhD thesis, University College London, UK.

Mohd Hafir, N H B (2019) The investigation of the interplay between professional identity and attitudes towards sustainability for more sustainability practices in the built environment sector. PhD thesis, University of Reading, UK.

Mohd Latif, H; Essah, E A and Donyavi, S (2024) Creating a link between healthy homes and architectural elements: a qualitative study of modern residential buildings. International Journal of Building Pathology and Adaptation, 42(4), pp. 637-652. ISSN 23984708

Mokhtari, M and Hosseinian, S M (2025) Optimal outcome sharing among clients, builders, and designers in collaborative construction contracts: Comparing design–bid–build and design–build methods using principal–agent theory. Journal of Construction Engineering and Management, 151(3): 04024212, ISSN 0733-9364

Molwus, J J; Erdogan, B and Ogunlana, S (2017) Using structural equation modelling to understand the relationships among critical success factors for stakeholder management in construction. Engineering, Construction and Architectural Management, 24(3), pp. 426-450. ISSN 0969-9988

Moorhead, Matthew (2019) Feasibility analysis in the pre-commitment stages of the property development process: An examination of uncertainty, risk and heuristic bias in management decision making Processes During the Pre‐commitment Stages of the Property Development Process in Australia. PhD thesis, Bond University, Australia.

Mootanah, D P (1998) Developing an integrated risk and value management framework for construction project management. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Mootanah, D P (1999) A holistic approach to the management of risk and value in project management. PhD thesis, Anglia Polytechnic University, UK.

Moragane, H P M N L B; Perera, B A K S; Palihakkara, A D and Ekanayake, B (2024) Application of computer vision for construction progress monitoring: A qualitative investigation. Construction Innovation, 24(2), pp. 446-469. ISSN 1471-4175

Morkos, R (2014) Operational efficiency frontier: Visualizing, manipulating, and navigating the construction scheduling state space with precedence, discrete, and disjunctive constraints. PhD thesis, Stanford University, USA.

Morris, Austin J (2022) Project management maturity and project success in NSW local government. PhD thesis, University of Technology Sydney, Australia.

Morris, J (1999) Improving construction design: the lean thinking paradigm. PhD thesis, Cranfield University, UK.

Morris, J; Rogerson, J and Jared, G (1998) A tool for modelling the briefing and design decision making processes in construction. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Morrow, S (2011) Health and safety: A designer's perspective. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Morrow, T K (1998) Effects of selected practices on project cost performance. PhD thesis, University of Texas at Austin, USA.

Moselhi, O; Assem, I and El-Rayes, K (2005) Change orders impact on labor productivity. Journal of Construction Engineering and Management, 131(3), pp. 354-359. ISSN 0733-9364

Mostafaeipour, A; Sadeghi, S; Jahangiri, M; Nematollahi, O and Rezaeian Sabbagh, A (2020) Investigation of accurate location planning for wind farm establishment: A case study. Journal of Engineering, Design and Technology, 18(4), pp. 821-845. ISSN 1726-0531

Motaleb, O and Kishk, M (2010) An investigation into causes and effects of construction delays in UAE. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Mousa, K; Zhang, Z and Sumarliah, E (2024) Mitigation strategies of public-private partnership (PPP) barriers in Palestinian construction projects. Engineering, Construction and Architectural Management, 31(8), pp. 3124-3147. ISSN 0969-9988

Murillo, Fernando (2024) A case study on university architecture professors' experiences teaching building information modeling technology. EdD thesis, Concordia University Irvine, USA.

Murphy, M; Dainty, A and Ren, Z (2011) Understanding women's experiences of construction education: A need for longitudinal research? In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Murphy, M E (2014) Implementing innovation: A stakeholder competency-based approach for BIM. Construction Innovation, 14(4), pp. 433-452. ISSN 1471-4175

Murphy, M E; Perera, R S and Heaney, S G (2008) Building design innovation: Expansion of classification linkages through case study analysis. Journal of Engineering, Design and Technology, 6(2), pp. 99-111. ISSN 1726-0531

Murphy, R (2011) Strategic planning in Irish quantity surveying practices. PhD thesis, Heriot-Watt University, UK.

Murphy, R (2013) Strategic planning in construction professional service firms: A study of Irish QS practices. Construction Management and Economics, 31(2), pp. 151-166. ISSN 1466433X

Murray, M D and Langford, D A (1998) Construction procurement systems: A linkage with project organizational models. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Musa, M M (2019) A framework for implementing target value delivery to enhance value creation in the construction industry. PhD thesis, Nottingham Trent University, UK.

Musarat, M A; Alaloul, W S and Liew, M S (2022) Inflation rate and labours' wages in construction projects: Economic relation investigation. Engineering, Construction and Architectural Management, 29(6), pp. 2461-2494. ISSN 0969-9988

Musenero, L; Baroudi, B and Gunawan, I (2023) Critical issues affecting dispute resolution practice in infrastructure public-private partnerships. Journal of Construction Engineering and Management, 149(3): 04023001, ISSN 0733-9364

Musonda, I (2012) Construction health and safety (H&S) performance improvement: a client-centred model. PhD thesis, University of Johannesburg, South Africa.

Muthelo, R G (2022) An integrated decision-making model for evaluating public sector construction bids. PhD thesis, University of Johannesburg, South Africa.

Mutti, C d N (2005) The drivers of Brazilian contractors' competitiveness in the international market. PhD thesis, University of Reading, UK.

Mwakabole, G C; Gurmu, A T and Tivendale, L (2019) Investigation of the challenges facing public-private partnership projects in Australia. Construction Economics and Building, 19(1), pp. 57-74. ISSN 2204-9029

Mwanaumo, E M and Mambwe, M (2019) Effect of management strategies in entrenching organisational safety culture in the electricity industry of Zambia. Journal of Construction Business and Management, 3(1), pp. 27-37. ISSN 2521-0165

Mzyece, D (2015) An investigation into the implementation of the Construction (Design and Management) Regulations in the construction industry. PhD thesis, University of Wolverhampton, UK.

Mándoki, R (2022) The social sustainability of standardisation in the Hungarian residential building sector. PhD thesis, University of Cambridge, UK.

Nada, D (2013) Project approval decisions: Exploring success factors. PhD thesis, University of Calgary, Canada.

Nadim, W (2016) Live-work and adaptable housing in Egypt: A zero commuting concept, lessons learnt from informal developments. Smart and Sustainable Built Environment, 5(3), pp. 289-302. ISSN 2046-6099

Naga Vamsi Krishna, J; Kota, S and Venkataraman, P B (2021) An impact of simulation labs on engineering students' academic performance: A critical investigation. Journal of Engineering, Design and Technology, 19(1), pp. 103-126. ISSN 1726-0531

Naghipour, M; Gholampour, A A and Nematzadeh, M (2013) Analytical and experimental study on damping ratio of GRP-reinforced glulam beams. Journal of Engineering, Design and Technology, 11(1), pp. 44-58. ISSN 1726-0531

Naim, A A A A (2018) An investigation of building information modelling implementation in KSA. PhD thesis, University of Wolverhampton, UK.

Naja, M and Baytiyeh, H (2015) Stopping the tragedy before it occurs protecting lebanese public schools from upcoming earthquake disasters. International Journal of Disaster Resilience in the Built Environment, 6(2), pp. 182-192. ISSN 1759-5916

Najib, T (2005) Investigation of success factors for smaller engineering firms. PhD thesis, Wayne State University, USA.

Nam, C H (1990) The process of product innovation in the building and heavy sectors of the U.S. construction industry. PhD thesis, Stanford University, USA.

Nam, C H and Tatum, C B (1989) Toward understanding of product innovation process in construction. Journal of Construction Engineering and Management, 115(4), pp. 517-534. ISSN 0733-9364

Nam, C H and Tatum, C B (1992) Noncontractual methods of integration on construction projects. Journal of Construction Engineering and Management, 118(2), pp. 385-398. ISSN 0733-9364

Nam, T-J (2001) Investigations of collaborative design environments: a framework for real-time collaborative 3D CAD. PhD thesis, Brunel University, UK.

Namkung, T T (2020) Diffusion of renewable energy technology (RET) the effects of absorptive capacity (ACAP) in construction. PhD thesis, Temple University, USA.

Namo, F and Fellows, R F (1993) The role of advertising in marketing civil/structural engineering consultancy firms. Construction Management and Economics, 11(6), pp. 431-441. ISSN 01446193

Naoum, S G (1989) An investigation into the performance of management contracts and the traditional methods of building procurement. PhD thesis, Brunel University, UK.

Nasirzadeh, F; Khanzadi, M and Mir, M (2018) A hybrid simulation framework for modelling construction projects using agent-based modelling and system dynamics: An application to model construction workers' safety behavior. International Journal of Construction Management, 18(2), pp. 132-143. ISSN 1562-3599

Nathan, P (1991) Project planning and control systems: An investigation into their application and implications of usage in the UK construction industry. PhD thesis, Brunel University, UK.

Naumets, S and Lu, M (2021) Investigation into explainable regression trees for construction engineering applications. Journal of Construction Engineering and Management, 147(8), ISSN 0733-9364

Navandar, Y V; Bari, C and Gaikwad, P G (2022) Failure factors–a comparative study of private and government construction firms. Engineering, Construction and Architectural Management, 29(6), pp. 2495-2513. ISSN 0969-9988

Navarro-Astor, E (2011) Work-family balance issues among construction professionals in Spain. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Nayak, B; Bhattacharyya, S S S; Kulkarni, O and Mehdi, S N (2023) Adoption of online pharmacy applications during COVID-19 pandemic; empirical investigation in the Indian context from push-pull and mooring framework. Journal of Engineering, Design and Technology, 21(4), pp. 1173-1196. ISSN 1726-0531

Ndekugri, I E (1986) Construction contract information management: an integrated systems approach. PhD thesis, Loughborough University, UK.

Ndukwe, Chigozie Victor (2023) Impact of globalisation on the construction supply chain: Challenges and responses in Victoria. PhD thesis, University of Melbourne, Australia.

Neamat, S D; Haido, J H and Wardeh, G (2025) Investigating pozzolanic glass waste's role in reinforcing ultra-high-performance concrete beams for enhanced sustainability. International Journal of Building Pathology and Adaptation, 43(4), pp. 633-651. ISSN 2398-4708

Nepal, M P; Park, M and Son, B (2006) Effects of schedule pressure on construction performance. Journal of Construction Engineering and Management, 132(2), pp. 182-188. ISSN 0733-9364

Nesan, L J (1997) A generic model for effective implementation of empowerment in construction contractor organisations. PhD thesis, University of Wolverhampton, UK.

Nesensohn C, B D J and Fearon D J, O E G (2013) Combining lean construction with maturity models. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Ness, K (2010) 'I know Brendan; he’s a good lad': The evaluation of skill in the recruitment and selection of construction workers. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Ness, K (2010) The discourse of 'respect for people' in UK construction. Construction Management and Economics, 28(5), pp. 481-493. ISSN 1466433X

Ness, K and Green, S (2008) Respect for people in the enterprise culture? In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Newcombe, R (2000) An investigation into simulating the procurement process in the United Kingdom construction industry. Journal of Construction Procurement, 6(2), ISSN 1358-9180

Newman, W H (1934) The building industry and business cycles. PhD thesis, University of Chicago, USA.

Newman, W M (1968) An investigation of methods of using computers for processing and storing architectural designs. PhD thesis, Imperial College London, UK.

Nguyen, M. V.; Khanh, H. D.; Nguyen, K. V. and Nguyen, T. T. H. (2026) Investigation of the impacts of perceived greenwashing on employee loyalty: The mediating role of guilt and frustration. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Nguyen, D A; Garvin, M J and Gonzalez, E E (2018) Risk allocation in U.S. Public-private partnership highway project contracts. Journal of Construction Engineering and Management, 144(5): 04018017, ISSN 0733-9364

Nguyen, Dinh Manh (2017) Maintenance practices: Improving sustainability performance of existing office buildings: An Australian case study. PhD thesis, University of Technology Sydney, Australia.

Nguyen, Hai N (2010) The impact of leadership behaviours and organisational culture on knowledge management practices in small and medium enterprises. PhD thesis, Griffith University, Australia.

Nguyen, T; Do, Q; Le, T and Le, C (2024) Discovering workers' actions leading to severe construction accidents using accident report data and sequence mining techniques. Journal of Construction Engineering and Management, 150(12): 04024172, ISSN 0733-9364

Nguyen, T H D; Chileshe, N; Rameezdeen, R and Wood, A (2019) Stakeholder influence pathways in construction projects: Multicase study. Journal of Construction Engineering and Management, 145(9): 05019011, ISSN 0733-9364

Nguyen, Tuan Son (2019) Investigation into stakeholder management in complex projects. PhD thesis, Griffith University, Australia.

Nicholas, J; Holt, G D and Harris, P T (2000) An investigation into predicting materials suppliers' profits. Journal of Construction Procurement, 6(2), ISSN 1358-9180

Nicholls, C and Murdoch, I J (2003) Construction industry capacity utilization and its implications. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Nik Bakht, M (2015) Analyzing social network discussions of infrastructure projects: towards a bottom-up decision making environment. PhD thesis, University of Toronto, Canada.

Nikolov, A (2022) Exploring pathways for improving the supply chain integration of infrastructure projects. PhD thesis, University of Warwick, UK.

Nitithamyong, P and Skibniewski, M J (2011) Success factors for the implementation of web-based construction project management systems: A cross-case analysis. Construction Innovation, 11(1), pp. 14-42. ISSN 1471-4175

Nizam Shaikh, R (2019) BIM-based investigation of total energy consumption in delivering buildings as a product. PhD thesis, University of Liverpool, UK.

Noopur (2025) Identifying the stressors hindering performance in the Indian construction industry: An empirical investigation. Engineering, Construction and Architectural Management, 32(2), pp. 1053-1073. ISSN 0969-9988

Nor Azazi, N A; Shaed, M M; Samsurijan, M S and Ebekozien, A (2024) The influence of higher learning institutions in developing the experience economy from the perspective of the urban community. Engineering, Construction and Architectural Management, 31(2), pp. 509-525. ISSN 0969-9988

Nordwall, U and Olofsson, T (2013) Architectural caring. Architectural qualities from a residential property perspective. Architectural Engineering and Design Management, 9(1), pp. 1-20. ISSN 1745-2007

Noyce, D A and Hanna, A S (1998) Planned and unplanned schedule compression: The impact on labour. Construction Management and Economics, 16(1), pp. 79-90. ISSN 01446193

Noynaert, J M and Potangaroa, R (2018) Psychometric evaluation of disaster impact. International Journal of Disaster Resilience in the Built Environment, 9(3), pp. 230-238. ISSN 1759-5916

Nuako, F; Ghansah, F A and Adusei, T (2026) Critical success factors for cost overrun minimization in public construction projects in developing countries: The case of Ghana. Construction Innovation, 26(1), pp. 44-62. ISSN 1471-4175

Nwadigo, O (2019) Real-time and dynamic planning and scheduling under disruption using multi-hybrid simulation and optimisation. PhD thesis, Auckland University of Technology, New Zealand.

Nwadike, A N and Wilkinson, S (2022) Why amending building codes? An investigation of the benefits of regular building code amendment in New Zealand. International Journal of Building Pathology and Adaptation, 40(1), pp. 76-100. ISSN 23984708

Nwodo, M N (2020) Investigation of exergy-based life cycle assessment of buildings. PhD thesis, University of Florida, USA.

Obeidat, B and Zahrawi, R (2024) Exploring the impact of built environment design on oncology inpatient rooms: A single-based study of King Abdullah University Hospital. Architectural Engineering and Design Management, 20(4), pp. 972-995. ISSN 1745-2007

Obi, L; Arif, M; Daniel, E I; Oladinrin, O T and Goulding, J S (2023) Establishing underpinning concepts for integrating circular economy and offsite construction: A bibliometric review. Built Environment Project and Asset Management, 13(1), pp. 123-139. ISSN 2044-124X