Items with Index Term: insulation

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Abu Aisheh, Y (2011) Climate change and the built environment: an evaluation of sustainable refurbishment options for higher education buildings in the UK. PhD thesis, University of Birmingham, UK.

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Acharya, N K; Lee, Y D and Im, H M (2006) Design errors: Tragic for the clients. Journal of Construction Research, 7(1), pp. 177-190. ISSN 1609-9451

Ade, R and Rehm, M (2021) Summertime comparative evaluation of indoor temperature and comfort in auckland New Zealand: A survey of green certified, code and older homes. Building Research & Information, 49(3), pp. 336-351. ISSN 0961-3218

Adekunle, T O (2015) Thermal performance of low-carbon prefabricated timber housing in the UK. PhD thesis, University of Kent, UK.

Adi Maimun, N H (2016) Price and rent effects of energy efficiency in residential properties: evidence from the Belfast Metropolitan area. PhD thesis, Ulster University, UK.

Al-Tarazi, D.; Alkhamaiseh, M.; Sara, R.; Rice, L. and Booth, C. A. (2026) Insights of residents' satisfaction and well-being associated with the architectural design of domestic buildings. Journal of Engineering, Design and Technology, 24(1), pp. 151-170. ISSN 1726-0531

Alencastro, J; Fuertes, A and de Wilde, P (2020) Quality management in UK social housing projects: Addressing thermal performance. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Alidadi Shamsabadi, A; Jahangiri, M; Rezaei, T; Yadollahi Farsani, R; Seryani, A and Hakim, S (2022) The design of a seasonal heat storage system with a geothermal heat pump for a residential building in Tehran. Journal of Engineering, Design and Technology, 20(6), pp. 1606-1626. ISSN 1726-0531

Alongi, A; Angelotti, A; Rizzo, A and Zanelli, A (2021) Measuring the thermal resistance of double and triple layer pneumatic cushions for textile architectures. Architectural Engineering and Design Management, 17(3-4), pp. 334-346. ISSN 1745-2007

Alsyouf, L; Al Harbat, R; Ma'bdeh, S N and Mushtaha, E S N (2026) Economic feasibility of low-impact retrofit strategies for enhancing energy efficiency in residential townhouses: A case study of sharjah. Construction Economics and Building, 26(1), ISSN 2204-9029

Amorim, Adriana Eloa Bento (2020) Construction workers remote estimate of the wbgt index in outdoor activities on concrete slabs. PhD thesis, Universidade Estadual de Campinas, Brazil.

Anjomshoa, E (2025) Investigation of lightweight gypsum based on montmorillonite nanoclay with enhanced insulation properties. International Journal of Building Pathology and Adaptation, 43(7), pp. 1637-1659. ISSN 2398-4708

Arida, M A (2024) Enhancing thermal comfort in commercial buildings: Contributions of machine learning algorithms for optimizing predictive thermal comfort indices. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Babrauskas, V; Lucas, D; Eisenberg, D; Singla, V; Dedeo, M and Blum, A (2012) Flame retardants in building insulation: A case for re-evaluating building codes. Building Research & Information, 40(6), pp. 738-755. ISSN 0961-3218

Belusko, M; Timothy, M and Leary, O (2010) Cost analyses of measures to improve residential energy ratings to 6 stars: Playford North development, South Australia. Construction Economics and Building, 10(1-2), pp. 36-47. ISSN 2204-9029

Birchmore, R; Davies, K; Etherington, P; Tait, R and Pivac, A (2017) Overheating in Auckland homes: Testing and interventions in full-scale and simulated houses. Building Research & Information, 45(1-2), pp. 157-175. ISSN 0961-3218

Boardman, B (2007) Examining the carbon agenda via the 40% house scenario. Building Research & Information, 35(4), pp. 363-378. ISSN 0961-3218

Bostancioglu, E (2021) Double skin façade assessment by fuzzy AHP and comparison with AHP. Architectural Engineering and Design Management, 17(1-2), pp. 110-130. ISSN 1745-2007

Botejara-Antúnez, M; González-Domínguez, J; Sánchez-Barroso, G and García-Sanz-Calcedo, J (2024) Optimal selection of false ceiling systems in healthcare buildings: A multidimensional hierarchical analysis for sustainability. Architectural Engineering and Design Management, 20(6), pp. 1815-1831. ISSN 1745-2007

Boussaa, Y; Dodoo, A; Nguyen, T and Rupar-Gadd, K (2024) Comprehensive renovation of a multi-apartment building in Sweden: Techno-economic analysis with respect to different economic scenarios. Building Research & Information, 52(4), pp. 463-478. ISSN 0961-3218

Bulut, M; Wilkinson, S; Khan, A; Jin, X H and Lee, C L (2021) Perceived benefits of retrofitted residential secondary glazing: An exploratory Australian study. International Journal of Building Pathology and Adaptation, 39(5), pp. 720-733. ISSN 23984708

Campos, C R (2023) Simplified Matlab calculation tool for LCA optimization of domestic buildings. PhD thesis, University of Strathclyde, UK.

Chellappa, V and Srivastava, V (2024) Science mapping approach based review of thermal comfort studies in Indian residential buildings. Journal of Engineering, Design and Technology, 22(2), pp. 297-315. ISSN 1726-0531

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Comiskey, D and Wilson, K (2020) A performance barrier? Cavity barrier installation in wall envelope makeups. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(1), pp. 97-109. ISSN 2046-6099

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Dutch, W G (1989) The capital cost aspects of the environmental impact of new highways in association with the new design technique: the commercial route methodology. PhD thesis, Loughborough University, UK.

Ebbert, T (2010) Re-face: Refurbishment strategies for the technical improvement of office façades. PhD thesis, Delft University of Technology, Netherlands.

Ebrahimigharehbaghi, S; Qian, Q K; de Vries, G and Visscher, H J (2022) Identification of the behavioural factors in the decision-making processes of the energy efficiency renovations: Dutch homeowners. Building Research & Information, 50(4), pp. 369-393. ISSN 0961-3218

Edirisinghe, R; Lingard, H and Broadhurst, D (2015) Exploring the potential for using video to communicate safety information to construction workers: Case studies of organisational use. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Ekanayake, B; Ahmadian Fard Fini, A; Wong, J K W and Smith, P (2024) A deep learning-based approach to facilitate the as-built state recognition of indoor construction works. Construction Innovation, 24(4), pp. 933-949. ISSN 1471-4175

Elkhayat, Y.; Moran, P.; Barrett, S.; Barry, P. and Goggins, J. (2026) Developing a methodology with a tool for calculating and reducing the upfront carbon emissions of buildings: Ireland as a case study. Architectural Engineering and Design Management, 22(1), pp. 168-187. ISSN 1745-2007

Essah, E A; Sanders, C H; Baker, P and Kalagasidis, A S (2009) Condensation and moisture transport in cold roofs: Effects of roof underlay. Building Research & Information, 37(2), pp. 117-128. ISSN 0961-3218

Evans, M (2013) An investigation into occupants' satisfaction in UK sustainable social housing. PhD thesis, University of the West of England, Bristol, UK.

Eyre, N; Fawcett, T; Topouzi, M; Killip, G; Oreszczyn, T; Jenkinson, K and Rosenow, J (2023) Fabric first: Is it still the right approach? Buildings & Cities, 4(1), pp. 965-972. ISSN 2632-6655

Fan, Y and Kokko, E (1997) Three-dimensional gaseous transfer within cellular plastic insulation and its consequences. Building Research & Information, 25(1), pp. 25-35. ISSN 0961-3218

Fay, R; Treloar, G and Iyer-Raniga, U (2000) Life-cycle energy analysis of buildings: A case study. Building Research & Information, 28(1), pp. 31-41. ISSN 0961-3218

Feng, H; Kassem, M; Greenwood, D and Doukari, O (2023) Whole building life cycle assessment at the design stage: A bim-based framework using environmental product declaration. International Journal of Building Pathology and Adaptation, 41(1), pp. 109-142. ISSN 23984708

Folorunso, C O (2021) Analysis of effectiveness of wooden floor finishes in some residential buildings in Lagos, Nigeria. International Journal of Building Pathology and Adaptation, 39(5), pp. 756-765. ISSN 23984708

Forman, T (2015) Practice, policy and professional roles: unintended consequences and performance gaps in UK domestic solid wall insulation retrofit projects. PhD thesis, Cardiff University, UK.

Foster, M E (1997) Energy conservation in the United Kingdom housing sector: An exploration of technical and social issues. PhD thesis, Open University, UK.

Friedman, A and Cammalleri, V (1996) The impact of R-2000 building technology on Canadian housing. Building Research & Information, 24(1), pp. 5-13. ISSN 0961-3218

Fuller, R J and Luther, M B (2003) Simulation of condensation problems in a roller-skating centre. Building Research & Information, 31(1), pp. 48-59. ISSN 0961-3218

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Galvin, R (2014) Why German homeowners are reluctant to retrofit. Building Research & Information, 42(4), pp. 398-408. ISSN 0961-3218

Ganguly, I (2008) Modeling alternatives and visualization of product adoption and usage in the residential construction industry. PhD thesis, University of Washington, USA.

Garmston, H M (2017) Decision-making in the selection of retrofit facades for non-domestic buildings. PhD thesis, University of Plymouth, UK.

Gauthier, S and Shipworth, D (2015) Behavioural responses to cold thermal discomfort. Building Research & Information, 43(3), pp. 355-370. ISSN 0961-3218

Getvoldsen, K S; Chandragiri, A K; Khalafallah, A M; Belizaire, M; Weirs, J; Raheem, H M J; Gerges, M and Butt, T E (2024) Sustainability’s three principal dimensions versus Climate Change Act 2008: A retrospective numerical modelling. Construction Economics and Building, 24(3), pp. 5-22. ISSN 2204-9029

Ghafoori, M and Abdallah, M (2022) Simulation-based optimization model to minimize equivalent annual cost of existing buildings. Journal of Construction Engineering and Management, 148(2): 04021202, ISSN 0733-9364

Ghanbari, M; Rusch, R and Skitmore, M (2024) BIM-based environmental assessment of residential renovation projects during the operational phase. Architectural Engineering and Design Management, 20(3), pp. 624-635. ISSN 1745-2007

Ghazi Wakili, K; Bundi, R and Binder, B (2004) Effective thermal conductivity of vacuum insulation panels. Building Research & Information, 32(4), pp. 293-299. ISSN 0961-3218

Glew, D; Johnston, D; Miles-Shenton, D and Thomas, F (2020) Retrofitting suspended timber ground-floors; comparing aggregated and disaggregated evaluation methods. Building Research & Information, 48(5), pp. 572-586. ISSN 0961-3218

Gori, V; Marincioni, V and Altamirano-Medina, H (2021) Retrofitting traditional buildings: A risk-management framework integrating energy and moisture. Buildings & Cities, 2(1), pp. 411-424. ISSN 2632-6655

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Göswein, V; Arehart, J; Phan-Huy, C; Pomponi, F and Habert, G (2022) Barriers and opportunities of fast-growing biobased material use in buildings. Buildings & Cities, 3(1), pp. 745-755. ISSN 2632-6655

Hajizadeh, S. and Seyis, S. (2026) Multi-climate zone approach to sustainable retrofitting for optimizing energy efficiency and CO2 reduction in Australian detached houses. International Journal of Building Pathology and Adaptation, 44(4), pp. 885-909. ISSN 2398-4708

Hallsted, B K (2010) Examining motivational factors in selecting spray polyurethane foam insulation for residential construction. PhD thesis, Northcentral University, USA.

Hamilton, I G; Shipworth, D; Summerfield, A J; Steadman, P; Oreszczyn, T and Lowe, R (2014) Uptake of energy efficiency interventions in English dwellings. Building Research & Information, 42(3), pp. 255-275. ISSN 0961-3218

Harode, A; Thabet, W and Leite, F (2024) Formulation of feature and label space using modified Delphi in support of developing a machine-learning algorithm to automate clash resolution. Journal of Construction Engineering and Management, 150(3): 04023173, ISSN 0733-9364

Harris, D J and Dudek, S J M (1997) Heat losses from suspended timber floors. Building Research & Information, 25(4), pp. 226-233. ISSN 0961-3218

Herring, H (2009) National building stocks: Addressing energy consumption or decarbonization? Building Research & Information, 37(2), pp. 192-195. ISSN 0961-3218

Hossain, Y (2017) Energy-efficient homes in Alaska: Historical and contemporary perspectives on adaptation and innovation. PhD thesis, University of Alaska Fairbanks, USA.

Hu, M (2020) Life-cycle environmental assessment of energy-retrofit strategies on a campus scale. Building Research & Information, 48(6), pp. 659-680. ISSN 0961-3218

Hughes, J O; Pallin, S; Aldykiewicz, A J and Clark, C J (2021) Installation quality framework: Investment return approach for energy savings on building product installation. Journal of Construction Engineering and Management, 147(11): 04021158, ISSN 0733-9364

Ilgın, H E; Karjalainen, M and Pelsmakers, S (2022) Contemporary tall residential timber buildings: What are the main architectural and structural design considerations? International Journal of Building Pathology and Adaptation, 41(6), pp. 26-46. ISSN 23984708

Johnston, D; Farmer, D; Brooke-Peat, M and Miles-Shenton, D (2016) Bridging the domestic building fabric performance gap. Building Research & Information, 44(2), pp. 147-159. ISSN 0961-3218

Johnston, D; Wingfield, J and Miles-Shenton, D (2010) Measuring the fabric performance of UK dwellings. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Kanellopoulos, G (2022) External fire spread from timber lined compartments. PhD thesis, University of Edinburgh, UK.

Kibwami, N; Rukidi, D; Wesonga, R and Manga, M (2024) Achieving net zero for clamp kiln fired brick production: A case of Uganda. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Kim, S and Hammad, A (2024) Decision support system (DSS) for selecting sustainable insulation material using Pareto search and novel fuzzy-modified technique for order of preference by similarity to ideal solution (TOPSIS) approach. International Journal of Construction Management, 24(7), pp. 734-747. ISSN 1562-3599

Kingma, B R M; Schweiker, M; Wagner, A and van Marken Lichtenbelt, W D (2017) Exploring internal body heat balance to understand thermal sensation. Building Research & Information, 45(7), pp. 808-818. ISSN 0961-3218

Kohansal, M E; Akaf, H R; Gholami, J and Moshari, S (2022) Investigating the simultaneous effects of building orientation and thermal insulation on heating and cooling loads in different climate zones. Architectural Engineering and Design Management, 18(4), pp. 410-433. ISSN 1745-2007

Koranteng, C; Simons, B and Manu, F W (2021) A thermal performance study of four communities in Ghana's savannah region. Engineering, Construction and Architectural Management, 28(10), pp. 3261-3281. ISSN 0969-9988

Kuusk, K and Kalamees, T (2016) Retrofit cost-effectiveness: Estonian apartment buildings. Building Research & Information, 44(8), pp. 920-934. ISSN 0961-3218

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Laar, M and Grimme, F W (2002) German developments in daylight guidance systems: An overview. Building Research & Information, 30(4), pp. 282-301. ISSN 0961-3218

Lai, C M and Chiang, C M (2006) How phase change materials affect thermal performance: Hollow bricks. Building Research & Information, 34(2), pp. 118-130. ISSN 0961-3218

Lazaro, S. A. M.; Li, X. and Baba, V. F. (2026) Evaluating expanded polystyrene insulation for enhancing energy efficiency in residential buildings: A scalable model from Mozambique. Journal of Engineering, Design and Technology, 24(4), pp. 992-1011. ISSN 1726-0531

Lee, I; Roppel, P; Lawton, M and Ferreira, P (2019) Design limits for framed wall assemblies dependent on material choices for sheathing membranes and exterior insulation. International Journal of Building Pathology and Adaptation, 37(4), pp. 426-447. ISSN 23984708

Lee, W V and Steemers, K (2017) Exposure duration in overheating assessments: A retrofit modelling study. Building Research & Information, 45(1-2), pp. 60-82. ISSN 0961-3218

Li, C (2023) Efficient and accurate assessment of fire spread over external claddings in high-rise buildings. PhD thesis, University of Manchester, UK.

Li, Q (2009) Energy efficiency design of residential buildings in North China cities. PhD thesis, Cardiff University, UK.

Liang Wong, I; Eames, P and Perera, S (2012) Energy simulations of a transparent-insulated office façade retrofit in London, UK. Smart and Sustainable Built Environment, 1(3), pp. 253-276. ISSN 2046-6099

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Lingard, H; Pink, S; Hayes, J; McDermott, V and Harley, J (2016) Using participatory video to understand subcontracted construction workers' safety rule violations. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Lynch, H (2014) Passivhaus in the UK: the challenges of an emerging market: a case study of innovation using mixed methods research. PhD thesis, University College London, UK.

Macintosh, A and Steemers, K (2005) Ventilation strategies for urban housing: Lessons from a PoE case study. Building Research & Information, 33(1), pp. 17-31. ISSN 0961-3218

Marchi, L; Susca, T; Benedetti, M; Antonini, E and Gaspari, J (2025) From waste to thermal insulation for buildings: An investigation of potentialities in the Italian context. Building Research & Information, 53(6), pp. 777-796. ISSN 0961-3218

Marshall, H E (1987) Building economics in the United States. Construction Management and Economics, 5(4), ISSN 01446193

Mastrucci, A and Rao, N D (2019) Bridging India's housing gap: Lowering costs and CO2 emissions. Building Research & Information, 47(1), pp. 8-23. ISSN 0961-3218

McCloughan, P (2004) Construction sector concentration: Evidence from Britain. Construction Management and Economics, 22(9), pp. 979-990. ISSN 01446193

Mhundwa, R and Simon, M (2021) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (DXBMC) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Mirzabeigi, S (2024) Integrated building envelope assessment towards automation of energy retrofits: Drone-based data acquisition, automated thermal anomaly detection, and workflow development. PhD thesis, State University of New York College of Environmental Science and Forestry, USA.

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Muhammed, A; Folorunso, C O and Fadairo, G (2024) Assessment of sandcrete hollow blocks' thermal performance as a walling material for tropical buildings in Lokoja, Nigeria. International Journal of Building Pathology and Adaptation, 42(4), pp. 653-671. ISSN 23984708

Mullens, M A and Arif, M (2006) Structural insulated panels: Impact on the residential construction process. Journal of Construction Engineering and Management, 132(7), pp. 786-794. ISSN 0733-9364

Nemati, M A and Rastaghi, Z (2024) Quality assessment of on-campus student housing facilities through a holistic post-occupancy evaluation (A case study of Iran). Architectural Engineering and Design Management, 20(4), pp. 719-740. ISSN 1745-2007

Nicholls, R (1991) Sandwich-barrel shell construction by inflation. Journal of Construction Engineering and Management, 117(1), pp. 131-147. ISSN 0733-9364

Nilsson, S (2003) Durability of district heating pipes. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Pearson, A D (2014) An investigation of climatically responsive ultra-low energy housing in rural Scotland: a case study. PhD thesis, University of Dundee, UK.

Peng, Z; Deng, W and Hong, Y (2019) Materials consumption, indoor thermal comfort and associated energy flows of urban residential buildings: Case studies from the cold climate zone of China. International Journal of Building Pathology and Adaptation, 37(5), pp. 579-596. ISSN 23984708

Perera, S; Senaratne, S; Rodrigo, M N N and Brady, L (2021) Analysis of embodied carbon and cost profiles of school buildings in Australia. Built Environment Project and Asset Management, 11(4), pp. 660-672. ISSN 2044-124X

Phelan, R S; Radjy, F; Haas, C and Hendrickson, C (1990) Computer-aided concrete-placement optimization. Journal of Construction Engineering and Management, 116(1), pp. 172-187. ISSN 0733-9364

Pogorelskiy, S (2024) BIM-based methods for optimizing the design and maintenance of telecommunications infrastructure in data centres. PhD thesis, Debreceni Egyetem, Hungary.

Porritt, S M; Cropper, P C; Shao, L and Goodier, C I (2013) Heat wave adaptations for UK dwellings and development of a retrofit toolkit. International Journal of Disaster Resilience in the Built Environment, 4(3), pp. 269-286. ISSN 1759-5916

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Pusceddu, C; Blumberg, G; Salvalai, G and Imperadori, M (2017) The use of building technology to support disaster resilience: The case study of air shelter house. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 139-157. ISSN 1759-5916

Ramprasad, V and Subbaiyan, G (2017) Perceived indoor environmental quality of classrooms and outcomes: A study of a higher education institution in India. Architectural Engineering and Design Management, 13(3), pp. 202-222. ISSN 1745-2007

Ratcliffe, J. W.; Alnaqshabandy, H.; Fox, M. and Goodhew, S. (2026) Optimising thermal performance in historic solid wall buildings: The role of orientation, natural insulation and building simulation. International Journal of Building Pathology and Adaptation, pp. 1-18. ISSN 2398-4708

Ratcliffe, J. W.; Alnaqshabandy, H.; Fox, M. and Goodhew, S. (2026) Optimising thermal performance in historic solid wall buildings: The role of orientation, natural insulation and building simulation. International Journal of Building Pathology and Adaptation, pp. 1-18. ISSN 2398-4708

Resalati, S; Kendrick, C C and Hill, C (2020) Embodied energy data implications for optimal specification of building envelopes. Building Research & Information, 48(4), pp. 429-445. ISSN 0961-3218

Riahi Zaniani, J; Taghipour Ghahfarokhi, S; Jahangiri, M and Alidadi Shamsabadi, A (2019) Design and optimization of heating, cooling and lightening systems for a residential villa at Saman city, Iran. Journal of Engineering, Design and Technology, 17(1), pp. 41-52. ISSN 1726-0531

Rodionova, A (2022) Robust and reliable building renovation strategies for environmental and economic performance. DSc thesis, ETH Zürich, Switzerland.

Rodrigues, C A (2017) Life-cycle environmental and cost assessment of building retrofits: Evaluating conventional and streamlined approaches. PhD thesis, Universidade de Coimbra, Portugal.

Rose, W (2019) Must attic ventilation be preserved in energy retrofits? International Journal of Building Pathology and Adaptation, 37(4), pp. 461-472. ISSN 23984708

Rousseau, L. S. A.; Amini, S.; Akin, S. and Hertwich, E. G. (2026) Retrofitting Norwegian residential buildings: An archetype-based dynamic stock model. Buildings & Cities, 7(1), pp. 757-774. ISSN 2632-6655

Sachchithananthan, M and Thayaparan, M (2025) A framework to select suitable sustainable materials for high-rise buildings in Sri Lanka. International Journal of Construction Management, 25(9), pp. 1072-1086. ISSN 1562-3599

Sahebzadeh, S; Dalvand, Z; Sadeghfar, M and Heidari, A (2020) Vernacular architecture of Iran's hot regions; elements and strategies for a comfortable living environment. Smart and Sustainable Built Environment, 9(4), pp. 573-593. ISSN 2046-6099

Sezer, A (2012) Environmental assessment tools and efficiency in housing and office refurbishment. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Shan, B; Chen, B; Wen, J and Xiao, Y (2023) Thermal performance of cross-laminated timber (CLT) and cross-laminated bamboo and timber (clbt) panels. Architectural Engineering and Design Management, 19(5), pp. 511-530. ISSN 1745-2007

Shareef, S; Mushtaha, E S; Abu Dabous, S and Alsyouf, I (2024) Holistic analysis for the efficiency of the thermal mass performance of precast concrete panels in hot climate zones. Engineering, Construction and Architectural Management, 31(10), pp. 4184-4206. ISSN 0969-9988

Singh, S; Sharma, S K and Akbar, M A (2023) Heat resistance and sorptivity of an air-entrained concrete containing mineral admixtures and CBA. Journal of Engineering, Design and Technology, 21(2), pp. 527-551. ISSN 1726-0531

Taleb, H; Elsebaei, M and El-Attar, M (2019) Enhancing the sustainability of shipping container homes in a hot arid region: A case study of Aswan in Egypt. Architectural Engineering and Design Management, 15(6), pp. 459-474. ISSN 1745-2007

Tavafzadeh Haghi, N; Ahmadian Nezhad Monfared, M; Hashemian, L and Bayat, A (2019) Capital cost comparison of pavements comprised of insulation layers: Case study in Edmonton, Canada. Journal of Construction Engineering and Management, 145(7): 04019038, ISSN 0733-9364

Tavares, V M M (2022) Life cycle assessment of prefabricated buildings towards a building stock approach. PhD thesis, Universidade de Coimbra, Portugal.

Tekin, H (2022) The impact of COVID-19 on construction labor productivity: The case of Turkey. Engineering, Construction and Architectural Management, 29(9), pp. 3775-3806. ISSN 0969-9988

Tenpierik, M J and Cauberg, J J M (2010) Encapsulated vacuum insulation panels: Theoretical thermal optimization. Building Research & Information, 38(6), pp. 660-669. ISSN 0961-3218

Tenpierik, M J; Cauberg, J J M and Thorsell, T I (2007) Integrating vacuum insulation panels in building constructions: An integral perspective. Construction Innovation, 7(1), pp. 38-53. ISSN 1471-4175

Thomas, H R; Rees, S W and Lloyd, R M (1996) Measured heat losses through a real ground floor slab. Building Research & Information, 24(1), pp. 15-26. ISSN 0961-3218

Tran, C N N; Tam, V W Y; Le, K N and Illankoon, I M C S (2023) Environmental impacts assessment for Australian buildings: Thermal resistance and environmental impacts relationship. International Journal of Construction Management, 23(2), pp. 243-252. ISSN 1562-3599

Tunefalk, M; Legner, M and Leijonhufvud, G (2020) Long-term effects of additional insulation of building façades in Sweden: Towards a holistic approach. International Journal of Building Pathology and Adaptation, 38(2), pp. 374-385. ISSN 23984708

Ulrich de Alencastro, J P (2019) The impact of quality management on the thermal performance of social housing in the United Kingdom. PhD thesis, University of Plymouth, UK.

Ur Rehman, H S; Raza, M A; Masood, R; Khan, M A; Alamgir, S; Javed, M A; Roy, K and Lim, J B P (2023) A multi-facet BIM based approach for green building design of new multi-family residential building using LEED system. International Journal of Construction Management, 23(12), pp. 2024-2038. ISSN 1562-3599

Visscher, H; Meijer, F; Majcen, D and Itard, L (2016) Improved governance for energy efficiency in housing. Building Research & Information, 44(5-6), pp. 552-561. ISSN 0961-3218

Weerasinghe, A S; Ramachandra, T and Nawarathna, A (2019) Effects of green retrofits: A case of industrial manufacturing buildings in Sri Lanka. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Weiss, T (2021) Energy flexibility and shiftable heating power of building components and technologies. Smart and Sustainable Built Environment, 10(4), pp. 740-758. ISSN 2046-6099

Wise, F; Moncaster, A and Jones, D (2021) Rethinking retrofit of residential heritage buildings. Buildings & Cities, 2(1), pp. 495-517. ISSN 2632-6655

Wong, I L; Perera, S and Eames, P C (2010) Goal directed life cycle costing as a method to evaluate the economic feasibility of office buildings with conventional and TI-façades. Construction Management and Economics, 28(7), pp. 715-735. ISSN 1466433X

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zaryoun, M and Hosseini, M (2019) Lightweight fiber-reinforced clay as a sustainable material for disaster resilient architecture of future buildings. Architectural Engineering and Design Management, 15(6), pp. 430-444. ISSN 1745-2007

Zhang, Y; Chang, R; Mao, W; Zuo, J; Zhang, W E and Liu, L (2025) Low-cost ios-based automated detection of under-construction interior drywalls: An exploratory study. Journal of Construction Engineering and Management, 151(10): 05025012, ISSN 0733-9364

Zhou, J.; Zhou, Y.; Xiong, X. and Wang, F. (2026) Temperature monitoring and temperature control measures optimization of arch dam floor of flow channel during construction period. Engineering, Construction and Architectural Management, 33(7), pp. 5874-5900. ISSN 0969-9988

de Souza, L. P.; Melo, A. P.; Triana, M. A. and Lamberts, R. (2026) Thermal resilience and life cycle assessment of social housing: A discussion about limitations in Brazil. Architectural Engineering and Design Management, 22(2), pp. 382-401. ISSN 1745-2007

Şentop Dümen, A and Tamer Bayazıt, N (2020) Enforcement of acoustic performance assessment in residential buildings and occupant satisfaction. Building Research & Information, 48(8), pp. 866-885. ISSN 0961-3218