Items with Index Term: injury

Abbasianjahromi, H and Talebian, R (2021) Identifying the most important occupational diseases in the construction industry: Case study of building industry in Iran. International Journal of Construction Management, 21(3), pp. 235-245. ISSN 1562-3599

Abdelhamid, T S (1999) Measuring and evaluating physiological demands of construction work. PhD thesis, University of Michigan, USA.

Abdelhamid, T S and Everett, J G (1999) Physiological demands of concrete slab placing and finishing work. Journal of Construction Engineering and Management, 125(1), pp. 47-52. ISSN 0733-9364

Aboagye-Nimo, E and Raidén, A B (2019) Challenging standardisation by embracing ambiguities of site safety: The case of micro construction firms. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Aboagye-Nimo, E; Raidén, A B and Tietze, S (2011) Investigating good health and safety practices in small construction firms in the United Kingdom. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Aboagye-Nimo, E; Raidén, A B; Tietze, S and King, A (2012) The use of experience and situated knowledge in ensuring safety among workers of small construction firms. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Abudayyeh, O; Federicks, T; Palmquist, M and Torres, H N (2003) Analysis of occupational injuries and fatalities in electrical contracting industry. Journal of Construction Engineering and Management, 129(2), pp. 152-158. ISSN 0733-9364

Adade-Boateng, A O; Fugar, F and Adinyira, E (2021) Framework to improve the attitudes of construction workers towards safety helmets. Journal of Construction in Developing Countries, 26(2), pp. 65-86. ISSN 1823-6499

Adeyemi, H O; Adejuyigbe, S B; Ismaila, S O and Adekoya, A F (2015) Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(3), pp. 419-434.

Afolabi, A; Yusuf, A and Akanmu, A (2025) Effect of a passive shoulder-support exoskeleton on muscle activity, range of motion, discomfort, and exertion during painting tasks. Journal of Construction Engineering and Management, 151(5): 04025027, ISSN 0733-9364

Afuye, O O; Oladimeji, O; Aina, O O; Tam, V W Y and Haddad, A N (2025) Factors influencing safety behaviours of construction tradesmen. International Journal of Construction Management, 25(4), pp. 375-384. ISSN 1562-3599

Agbo, B C D (2015) Human capital obsolescence in the building construction industry: Strategic imperatives for Nigeria. PhD thesis, University of Minnesota, USA.

Agyem-Bediako, S F (2007) Management commitment to safety among multinational construction companies in developing countries: A case of Ghana. DSc thesis, University of Massachusetts Lowell, USA.

Ahmad, R K and Gibb, A G F (2003) Measuring safety culture with SPMT: Field-data. Journal of Construction Research, 4(1), pp. 29-44. ISSN 1609-9451

Ahmad, R K; Gibb, A G F and McCaffer, R (1998) Methodology to develop an effective safety performance measurement technique (spmt). In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Ahmadi, Ehsan (2025) Memory-augmented llm agent for predicting locomotion modes in construction activities. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Ahn, C R; Lee, S; Sun, C; Jebelli, H; Yang, K and Choi, B (2019) Wearable sensing technology applications in construction safety and health. Journal of Construction Engineering and Management, 145(11): 03119007, ISSN 0733-9364

Akanmu, A; Olayiwola, J and Olatunji, O A (2020) Musculoskeletal disorders within the carpentry trade: Analysis of timber flooring subtasks. Engineering, Construction and Architectural Management, 27(9), pp. 2577-2590. ISSN 0969-9988

Akinlolu Temisola, M; Oladimeji Benedict, O and Haupt, T C (2021) A scientometric review and meta-analysis of the health and safety of women in construction: Structure and research trends. Journal of Engineering, Design and Technology, 19(2), pp. 446-466. ISSN 1726-0531

Aksorn, T and Hadikusumo, B H W (2007) The unsafe acts and the decision-to-err factors of Thai construction workers. Journal of Construction in Developing Countries, 12(1), pp. 1-25. ISSN 1823-6499

Al Haadir, Saeed A (2015) Model for improving safety behaviours and outcomes in the Saudi Arabian construction industry. PhD thesis, Griffith University, Saudi Arabia.

Al-Aubaidy, N A (2015) Factors affecting underreporting of construction safety incidents on capital projects. PhD thesis, University of Texas at Austin, USA.

Al-Bayati, A J (2017) Managing workforce diversity in construction to improve communication and reduce fatalities (Hispanic workforce focus). PhD thesis, Western Michigan University, USA.

Al-Bayati, A J (2019) Satisfying the need for diversity training for Hispanic construction workers and their supervisors at US construction workplaces: A case study. Journal of Construction Engineering and Management, 145(6): 05019007, ISSN 0733-9364

Al-Bayati, A J; Abudayyeh, O; Fredericks, T and Butt, S E (2017) Managing cultural diversity at U.S. Construction sites: Hispanic workers' perspectives. Journal of Construction Engineering and Management, 143(9): 04017064, ISSN 0733-9364

Al-Bayati, A J; Al-Kasasbeh, M; Awolusi, I; Abudayyeh, O and Umar, T (2021) Trends of occupational fatal and nonfatal injuries in electrical and mechanical specialty contracting sectors: Necessity for a learning investigation system. Journal of Construction Engineering and Management, 147(7): 04021069, ISSN 0733-9364

Al-Bayati, A J; Eiris, R; Hernandez, G O and Al-Bayati, M A (2023) Addressing social inequity in construction safety research: Personal protective equipment focus. Journal of Construction Engineering and Management, 149(12): 04023127, ISSN 0733-9364

Al-Khiami, M. I. and Lindhard, Sø M. (2026) On-site evaluation of back-support exoskeleton effectiveness in construction: A multiple case study of physical performance, ergonomic comfort, and user acceptance among masonry workers. Journal of Construction Engineering and Management, 152(10): 04026167, ISSN 0733-9364

Al-Shehri, Y (2015) Relationship between personality trait and multi-national construction workers safety performance in Saudi Arabia. PhD thesis, Loughborough University, UK.

Alasmari, H; Chrisp, M T and Bowles, G (2012) A framework for enhancing and improving the safety culture on Saudi construction sites. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Albagoury, S. H. and AbdelMaksoud, K. M. (2026) Integrating socio-economic impact assessment into the reconstruction plan for Derna, Libya. International Journal of Disaster Resilience in the Built Environment, pp. 1-13. ISSN 1759-5908

Albeaino, G; Brophy, P; Jeelani, I; Gheisari, M and Issa, R R A (2023) Impact of drone presence on construction individuals working at heights. Journal of Construction Engineering and Management, 149(11): 04023119, ISSN 0733-9364

Albert, A (2013) Strategies for construction hazard recognition. PhD thesis, University of Colorado at Boulder, USA.

Albert, A and Hallowel, M R (2013) Revamping occupational safety and health training: Integrating andragogical principles for the adult learner. Construction Economics and Building, 13(3), pp. 128-140. ISSN 2204-9029

Albert, A; Hallowell, M R; Kleiner, B; Chen, A and Golparvar-Fard, M (2014) Enhancing construction hazard recognition with high-fidelity augmented virtuality. Journal of Construction Engineering and Management, 140(7): 04014024, ISSN 0733-9364

Albert, A; Jeelani, I and Han, K (2020) Developing hazard recognition skill among the next-generation of construction professionals. Construction Management and Economics, 38(11), pp. 1024-1039. ISSN 01446193

Albouwarthan, M A (2020) Prolonged heat exposure and health outcomes among construction workers in Saudi Arabia. DSc thesis, University of Massachusetts Lowell, USA.

Alexander, D; Hallowell, M and Gambatese, J (2017) Precursors of construction fatalities. I: Iterative experiment to test the predictive validity of human judgment. Journal of Construction Engineering and Management, 143(7): 04017023, ISSN 0733-9364

Alhemoud, A M (1996) The development and testing of a comprehensive tool for assessing the effectiveness of occupational safety and health programs. PhD thesis, University of Cincinnati, USA.

Ali, A H and Kineber, A F (2025) Unveiling and modelling the impact of safety drivers on the overall success of construction projects in developing countries. International Journal of Construction Management, 25(11), pp. 1357-1379. ISSN 1562-3599

Aliasgari, R; Fan, C; Li, X; Golabchi, A and Hamzeh, F (2024) MOCAP and ai-based automated physical demand analysis for workplace safety. Journal of Construction Engineering and Management, 150(7): 04024060, ISSN 0733-9364

Alkaissy, Maryam (2022) Worksite accidents quantification in construction: Safety relations with project performance metrics. PhD thesis, Monash University, Australia.

Allison, L and Kaminsky, J (2017) Safety communication networks: Females in small work crews. Journal of Construction Engineering and Management, 143(8): 04017050, ISSN 0733-9364

Almatared, M M S (2024) An integrated digital twin framework and evacuation simulation system for enhanced safety in smart buildings. PhD thesis, Western Michigan University, USA.

Almén, L and Larsson, T J (2014) Health and safety coordinators in building projects. Built Environment Project and Asset Management, 4(3), pp. 251-263. ISSN 2044-124X

Alomari, K A; Gambatese, J A and Tymvios, N (2018) Risk perception comparison among construction safety professionals: Delphi perspective. Journal of Construction Engineering and Management, 144(12): 04018107, ISSN 0733-9364

Alqahtani, B M A (2022) Influence of work-related stressors on safety performance on construction sites in the Kingdom of Saudi Arabia. PhD thesis, Western Michigan University, USA.

Alrasheed, Haitham (2015) A socio-ecological framework for improving the psychological health of foreign workers in developing countries: The case of saudi construction industry. PhD thesis, University of New South Wales, Australia.

Alrehaili, Omar (2016) Assessing safety culture among personnel in governmental construction sites at Saudi Arabia: A quantitative study approach. PhD thesis, University of Central Florida, USA.

Alruqi, W M and Hallowell, M R (2019) Critical success factors for construction safety: Review and meta-analysis of safety leading indicators. Journal of Construction Engineering and Management, 145(3): 04019005, ISSN 0733-9364

Alsharef, A F A (2022) Leveraging data analytics to improve construction operations and occupational safety. PhD thesis, North Carolina State University, USA.

Altayeb, S (1992) Efficacy of drug testing programs implemented by contractors. Journal of Construction Engineering and Management, 118(4), pp. 780-790. ISSN 0733-9364

Althaqafi, Torky (2015) Using stakeholder theory to explain the development and operation of safety culture and systems to improve safety performance in the construction industry in Saudi Arabia. PhD thesis, University of Adelaide, Australia.

Alwasel, A; Abdel-Rahman, E M; Haas, C T and Lee, S (2017) Experience, productivity, and musculoskeletal injury among masonry workers. Journal of Construction Engineering and Management, 143(6): 05017003, ISSN 0733-9364

Alzayd, Rana (2016) A constructability methodology to integrate planning and design for workers' safety in construction management. DrIng thesis, University of Braunschweig & University of Florence, Germany.

Amorim, Adriana Eloa Bento (2020) Construction workers remote estimate of the wbgt index in outdoor activities on concrete slabs. PhD thesis, Universidade Estadual de Campinas, Brazil.

Andersen, L P; Karlsen, I L; Kines, P; Joensson, T and Nielsen, K J (2015) Social identity in the construction industry: Implications for safety perception and behaviour. Construction Management and Economics, 33(8), pp. 640-652. ISSN 01446193

Andersen, L P; Nørdam, L; Joensson, T; Kines, P and Nielsen, K J (2018) Social identity, safety climate and self-reported accidents among construction workers. Construction Management and Economics, 36(1), pp. 22-31. ISSN 01446193

Andersen, L P S and Grytnes, R (2021) Different ways of perceiving risk and safety on construction sites and implications for safety cooperation. Construction Management and Economics, 39(5), pp. 419-431. ISSN 01446193

Antwi-Afari, M F; Li, H; Seo, J; Anwer, S; Yevu, S K and Wu, Z (2020) Validity and reliability of a wearable insole pressure system for measuring gait parameters to identify safety hazards in construction. Engineering, Construction and Architectural Management, 28(6), pp. 1761-1779. ISSN 0969-9988

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W; Mehmood, I and Wong, A Y L (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29(9), pp. 3415-3438. ISSN 0969-9988

Anwer, S; Li, H; Umer, W; Antwi-Afari, M F; Mehmood, I; Yu, Y; Haas, C and Wong, A Y L (2023) Identification and classification of physical fatigue in construction workers using linear and nonlinear heart rate variability measurements. Journal of Construction Engineering and Management, 149(7): 04023057, ISSN 0733-9364

Arendas, J (2016) A relational leadership rationale for the support of construction safety directors: A narrative study. PhD thesis, Chicago School of Professional Psychology, USA.

Aroke, O; Hasanzadeh, S; Esmaeili, B; Dodd, M D and Brock, R (2022) Using worker characteristics, personality, and attentional distribution to predict hazard identification performance: A moderated mediation analysis. Journal of Construction Engineering and Management, 148(6): 04022033, ISSN 0733-9364

Aroke, O M (2022) Measuring attention, working memory and visual perception to reduce the risk of injuries in the construction industry. PhD thesis, George Mason University, USA.

Artis, S (2007) The effects of perceived organizational support on training and safety in Latino and non-Latino construction workers. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Asad, M M; Hassan, R B; Sherwani, F; Aamir, M; Soomro, Q M and Sohu, S (2019) Design and development of a novel knowledge-based decision support system for industrial safety management at drilling process: HAZFO Expert 1.0. Journal of Engineering, Design and Technology, 17(4), pp. 705-718. ISSN 1726-0531

Asad, M M; Hassan, R B; Sherwani, F; Rind, I A and Maiji, Y (2020) Development of a novel safety and health educational management information system (HAZ-PRO) for oil and gas production operation: A proposed framework. Journal of Engineering, Design and Technology, 18(5), pp. 959-971. ISSN 1726-0531

Asadi, S; Sharghi, A; Mottaki, Z and Salehsedghpour, B (2025) Housing reconstruction after traumatic events: A POE study of Bam housing after the 2003 earthquake, Iran. International Journal of Disaster Resilience in the Built Environment, 16(1), pp. 57-71. ISSN 1759-5908

Asah-Kissiedu, M (2019) Development of an integrated safety, health and environmental management capability maturity model for Ghanaian construction companies. PhD thesis, University of the West of England, Bristol, UK.

Assaad, R and El-Adaway, I H (2021) Determining critical combinations of safety fatality causes using spectral clustering and computational data mining algorithms. Journal of Construction Engineering and Management, 147(5): 04021035, ISSN 0733-9364

Atkinson, A R and Westall, R (2010) The relationship between integrated design and construction and safety on construction projects. Construction Management and Economics, 28(9), pp. 1007-1017. ISSN 1466433X

Attah, A (2019) The relationship between information quality and construction safety. PhD thesis, Walden University, USA.

Aunwong, P and Hadikusumo, B H W (2025) Digital 2D and 3D modelling for construction safety management in Thai construction projects. International Journal of Construction Management, 25(15), pp. 1778-1790. ISSN 1562-3599

Awolusi, I G (2017) Active construction safety leading indicator data collection and evaluation. PhD thesis, University of Alabama, USA.

Axelsson, P-O (1991) Accident prevention in the construction industry. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Ayhan, B U and Tokdemir, O B (2020) Accident analysis for construction safety using latent class clustering and artificial neural networks. Journal of Construction Engineering and Management, 146(3): 04019114, ISSN 0733-9364

Babalola, A; Manu, P; Cheung, C; Yunusa-Kaltungo, A; Bartolo, P; Gao, S and Perera, S (2022) Applications of immersive technologies for occupational safety and health management in the construction industry: A systematic review. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Baker, H (2021) A multimethod approach to learning from text-based construction failure data. PhD thesis, University of Edinburgh, UK.

Baker, H; Smith, S; Masterton, G and Hewlett, B (2020) Data-led learning: Using natural language processing (NLP) and machine learning to learn from construction site safety failures. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Balgheeth, Y (2016) Enhancing existing health and safety processes in public sector construction projects within Saudi Arabia using building information modelling approaches. PhD thesis, University of Salford, UK.

Bangaru, S S (2021) Fatigue monitoring through wearable sensors for construction workers. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Bangaru, S S; Wang, C; Zhou, X; Jeon, H W and Li, Y (2020) Gesture recognition-based smart training assistant system for construction worker earplug-wearing training. Journal of Construction Engineering and Management, 146(12): 04020144, ISSN 0733-9364

Bao, S; Bu, H and Rui, N (2025) Computer vision-based recognition of spatial relevance between engineering vehicles and workers for monitoring struck-by accidents. Journal of Construction Engineering and Management, 151(11): 04025163, ISSN 0733-9364

Baradan, S (2004) Comparative injury risk analysis of building trades. PhD thesis, Wayne State University, USA.

Baradan, S and Usmen, M A (2006) Comparative injury and fatality risk analysis of building trades. Journal of Construction Engineering and Management, 132(5), pp. 533-539. ISSN 0733-9364

Bayona, A; Hallowell, M R and Bhandari, S (2024) The things that hurt people are not the same as the things that kill people: Key differences in the proximal causes of low- and high-severity construction injuries. Journal of Construction Engineering and Management, 150(8): 04024089, ISSN 0733-9364

Bayona, A; Hallowell, M R; Bhandari, S; Moyen, N and Lien, A (2025) Impact of energy-based safety training on quality of prejob safety meetings and control of hazardous energy in construction: Multiple baseline experiment. Journal of Construction Engineering and Management, 151(7): 04025086, ISSN 0733-9364

Bayona Malo, A A (2025) Evidence-based strategies to define, differentiate, and prevent serious injury and fatality exposure in construction. PhD thesis, University of Colorado at Boulder, USA.

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Bello, M A (2012) Minimizing impediments to design for construction safety (DFCS) implementation on capital projects. PhD thesis, Carnegie Mellon University, USA.

Bentil, K K (1990) A model approach for predicting commercial construction site accidents. PhD thesis, University of Florida, USA.

Berawi, M A; Miraj, P; Arifuddin, R; Aulia, D and Rahma, S H (2022) Investigating current practice on disincentive programmes in the Indonesian construction industry. Journal of Construction in Developing Countries, 27(2), pp. 87-107. ISSN 1823-6499

Bernold, L E and Guler, N (1993) Analysis of back injuries in construction. Journal of Construction Engineering and Management, 119(3), pp. 607-621. ISSN 0733-9364

Bernold, L E; Lorenc, S J and Davis, M L (2001) Technological intervention to eliminate back injury risks for nailing. Journal of Construction Engineering and Management, 127(3), pp. 245-250. ISSN 0733-9364

Bhandari, S and Hallowell, M R (2017) Emotional engagement in safety training: Impact of naturalistic injury simulations on the emotional state of construction workers. Journal of Construction Engineering and Management, 143(12): 4017090, ISSN 0733-9364

Blackmon, R B and Gramopadhye, A K (1995) Improving construction safety by providing positive feedback on backup alarms. Journal of Construction Engineering and Management, 121(2), pp. 166-171. ISSN 0733-9364

Boateng, E B (2021) The role of human safety interventions on co-workers’ safety outcomes in construction projects. PhD thesis, University of Newcastle, Australia.

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Bong, S; Rameezdeen, R; Zuo, J; Li, R Y M and Ye, G (2015) The designer's role in workplace health and safety in the construction industry: Post-harmonized regulations in South Australia. International Journal of Construction Management, 15(4), pp. 276-287. ISSN 1562-3599

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Bridgewater, C (1992) A new approach to the design of buildings for automated construction. PhD thesis, University of Reading, UK.

Bugg, R; Collins, W and Gilbert, C (2018) Applying radio frequency identification tags to improve personnel safety in dredging construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Bust, P D (2011) Changing occupational health and safety practices in the manual handling of highway kerbs: cultural impediments and obstacles to innovation. PhD thesis, Loughborough University, UK.

Cakan, H (2012) Analysis and modeling of roofer and steel worker fall accidents. PhD thesis, Wayne State University, USA.

Cakan, H; Kazan, E and Usmen, M (2014) Investigation of factors contributing to fatal and non-fatal roofer fall accidents. International Journal of Construction Education and Research, 10(4), pp. 300-317. ISSN 1557-8771

Calhoun, M E (2015) Synergistic effects among leading indicators of construction safety management. PhD thesis, University of Alaska Fairbanks, USA.

Calle Muller, C and ElZomor, M (2025) The role of disruptive technologies in enhancing disaster response and resilience in low-income communities. International Journal of Disaster Resilience in the Built Environment, 16(5), pp. 604-619. ISSN 1759-5908

Campbell, J M (2008) Safety hazard and risk identification and management in infrastructure management. PhD thesis, University of Edinburgh, UK.

Campbell, J M and Smith, S D (2007) Safety, hazard and risk identification and management in infrastructure management: A project overview. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Chambers, M L (2021) Fine particulate air pollution and accident risk: Three essays. PhD thesis, Vanderbilt University, USA.

Chan, D W M; Hung, H T W; Chan, A P C and Lo, T K K (2014) Overview of the development and implementation of the mandatory building inspection scheme (MBIS) in Hong Kong. Built Environment Project and Asset Management, 4(1), pp. 71-89. ISSN 2044-124X

Chan, I Y S and Leung, M Y (2011) Impact of stress on injury incidents among construction workers. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Chang, Y P (2020) Construction worker safety and accident prevention in Taiwan. PhD thesis, University of Bristol, UK.

Charuvil Elizabeth, R M; Sattari, F; Lefsrud, L and Gue, B (2025) Reducing serious injuries and fatalities in industrial construction-application of machine learning to analyze emotional intelligence and psychosocial factors. International Journal of Construction Management, 25(12), pp. 1404-1414. ISSN 1562-3599

Chellappa, V and Gunasekaran, A L (2022) Drivers for implementing design for safety in construction: A review. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(1), pp. 39-49. ISSN 17514304

Chen, J; Taylor, J E and Comu, S (2017) Assessing task mental workload in construction projects: A novel electroencephalography approach. Journal of Construction Engineering and Management, 143(8): 04017053, ISSN 0733-9364

Chen, Xinyu (2025) Multimodal data fusion-based ergonomic assessment method for construction workers. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Chen, Y; McCabe, B and Hyatt, D (2017) Relationship between individual resilience, interpersonal conflicts at work, and safety outcomes of construction workers. Journal of Construction Engineering and Management, 143(8): 04017042, ISSN 0733-9364

Cheung, C M and Qingbin, C (2016) Setting the stage for effective safety leadership in construction: The antecedents of safety-specific transformational leadership behaviours. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Chi, S; Han, S and Kim, D Y (2013) Relationship between unsafe working conditions and workers' behavior and impact of working conditions on injury severity in U.S. Construction industry. Journal of Construction Engineering and Management, 139(7), pp. 826-838. ISSN 0733-9364

Chigara, B (2018) Integrating sustainability principles in construction health and safety management practices in Zimbabwe. PhD thesis, Nelson Mandela University, South Africa.

Choe, S and Leite, F (2017) Assessing safety risk among different construction trades: Quantitative approach. Journal of Construction Engineering and Management, 143(5): 04016133, ISSN 0733-9364

Choe, Sooyoung (2015) 4-dimensional process-aware site-specific construction safety planning. PhD thesis, University of Texas at Austin, USA.

Chung, J Y (1984) Comparison of safety programs and employee attitudes within university of California facilities management departments. PhD thesis, University of California, Santa Barbara, USA.

Clark, P I (2011) CDM regulations: safety targeted assessment through gateway evaluation (stage) approach. PhD thesis, University of the West of England, Bristol, UK.

Clawson, Bobie Sue Anna (2024) The influence of walking surface types on gait parameters, kinematics and worker perceptions in relation to slips, trips, and fall incidents in the construction industry. PhD thesis, Indiana University of Pennsylvania, USA.

Cooke, T; Lingard, H and Blismas, N (2013) Australian construction supervisors' response to occupational health and safety. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(6), pp. 287-296. ISSN 17514312

Cotton, A P; Sohail, M and Scott, R E (2005) Towards improved labour standards for construction of minor works in low income countries. Engineering, Construction and Architectural Management, 12(6), pp. 617-632. ISSN 0969-9988

Daniel, E I; Oshodi, O S and Odediran, S (2024) An exploration of construction craftspeople apprentice training: Evidence from the UK. International Journal of Construction Education and Research, 20(2), pp. 218-240. ISSN 15578771

Danso, F O; Agyekum, K; Manu, P; Adinyira, E; Ahadzie, D K and Badu, E (2024) Examining the perception of site workers of their risk-taking behaviours on construction sites in Ghana. Engineering, Construction and Architectural Management, 31(8), pp. 2997-3023. ISSN 0969-9988

Darragh, A J R (2001) Patterns of injury among residential construction workers before and after a safety intervention program, 1994-1998. PhD thesis, Colorado State University, USA.

Datta, S D; Akter, J; Rhyme, A N; Mamun, M A; Rana, M J and Abdullah, M S (2025) Assessing and mitigating building fire risk based on the scenario clusters in Bangladesh. International Journal of Construction Management, 25(12), pp. 1381-1394. ISSN 1562-3599

Davis, B L (2024) State-legalized marijuana: The effects on construction safety. PhD thesis, Capitol Technology University, USA.

De Saram, D D and Tang, S L (2005) Pain and suffering costs of persons in construction accidents: Hong Kong experience. Construction Management and Economics, 23(6), pp. 645-658. ISSN 01446193

Dewlaney, K S and Hallowell, M (2012) Prevention through design and construction safety management strategies for high performance sustainable building construction. Construction Management and Economics, 30(2), pp. 165-177. ISSN 1466433X

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Diaz, Joaquin Manuel (2026) Lived experiences of Texas construction workers reporting near misses on their jobsite. DPh thesis, Walden University, USA.

Dong, M H (1981) Assessment of Occupational Safety and Health Act of 1970: A case analysis of retrospective work injury data. DPA thesis, University of Southern California, USA.

Dumrak, J; Mostafa, S; Kamardeen, I and Rameezdeen, R (2013) Factors associated with the severity of construction accidents: The case of South Australia. Construction Economics and Building, 13(4), pp. 32-49. ISSN 2204-9029

Dunlap, C D (2012) A safety elements model for the building construction industry. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Dutta, A; Breloff, S P; Dai, F; Sinsel, E W; Warren, C M and Wu, J Z (2020) Identifying potentially risky phases leading to knee musculoskeletal disorders during shingle installation operations. Journal of Construction Engineering and Management, 146(3): 04019118, ISSN 0733-9364

Eaves S, G D G A (2013) Building healthy construction workers by better workplace design: Understanding the context. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Edema, E U (2020) Risk mitigation strategies to prevent the failure of civil engineering projects in Nigeria. PhD thesis, Northcentral University, USA.

Edirisinghe, R and Lingard, H (2016) Exploring the potential for the use of video to communicate safety information to construction workers: Case studies of organizational use. Construction Management and Economics, 34(6), pp. 366-376. ISSN 0144-6193

Edirisinghe, R; Lingard, H and Broadhurst, D (2015) Exploring the potential for using video to communicate safety information to construction workers: Case studies of organisational use. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Edwards, D; Parn, E A; Sing, M C P and Thwala, W D (2019) Risk of excavators overturning: Determining horizontal centrifugal force when slewing freely suspended loads. Engineering, Construction and Architectural Management, 26(3), pp. 479-498. ISSN 0969-9988

Ehsanifar, M and Hemesy, M (2021) A new hybrid multi-criteria decision-making model to prioritize risks in the construction process under fuzzy environment (case study: The Valiasr Street Underpass Project). International Journal of Construction Management, 21(5), pp. 508-523. ISSN 1562-3599

El Meouche, R; Abunemeh, M; Hijaze, I; Mebarki, A and Shahrour, I (2018) Developing optimal paths for evacuating risky construction sites. Journal of Construction Engineering and Management, 144(2): 04017099, ISSN 0733-9364

Elelu, K; Le, T and Le, C (2023) Collision hazard detection for construction worker safety using audio surveillance. Journal of Construction Engineering and Management, 149(1): 04022159, ISSN 0733-9364

Elghamrawy, T M (2011) Optimizing work zone practices for highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Elias, I; Felix, H; David, P and David, O (2011) Improving construction health and safety: Application of cost-benefit analysis (CBA) for accident prevention. International Journal of Construction Management, 11(1), pp. 19-35. ISSN 1562-3599

Emuze, F (2021) Fortifying management control of health, safety and productivity loss in South African construction. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Emuze, F and Smallwood, J J (2012) Perspectives on health and safety in construction and design. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 165(1), pp. 27-34. ISSN 17514312

Emuze, F and Smallwood, J J (2014) Collaborative working in South African construction: Contractors' perspectives. Journal of Engineering, Design and Technology, 12(3), pp. 294-306.

Emuze F, S J (2013) Construction motor vehicle accidents in South Africa: Causes and impact. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Enshassi, A; Choudhry, R M; Mayer, P E and Shoman, Y (2008) Safety performance of subcontractors in the palestinian construction industry. Journal of Construction in Developing Countries, 13(1), pp. 51-62. ISSN 1823-6499

Enz, D L (2009) Construction project administration and management for mitigating work zone crashes and fatalities: An integrated risk management model. PhD thesis, Iowa State University, USA.

Esmaeili, B (2012) Identifying and quantifying construction safety risks at the attribute level. PhD thesis, University of Colorado at Boulder, USA.

Esmaeili, B and Hallowell, M (2013) Integration of safety risk data with highway construction schedules. Construction Management and Economics, 31(6), pp. 528-541. ISSN 1466433X

Esmaeili, B and Hallowell, M R (2012) Diffusion of safety innovations in the construction industry. Journal of Construction Engineering and Management, 138(8), pp. 955-963. ISSN 0733-9364

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. I: Analysis at the fundamental level. Journal of Construction Engineering and Management, 141(8): 04015021, ISSN 0733-9364

Esmaeili, B; Hallowell, M R and Rajagopalan, B (2015) Attribute-based safety risk assessment. II: Predicting safety outcomes using generalized linear models. Journal of Construction Engineering and Management, 141(8): 04015022, ISSN 0733-9364

Estrin, J (2017) Impact of leadership strategies on perceived climate of safety at the construction job site. PhD thesis, Nova Southeastern University, USA.

Everett, J G (1999) Overexertion injuries in construction. Journal of Construction Engineering and Management, 125(2), pp. 109-114. ISSN 0733-9364

Everett, J G and Frank Jr, P B (1996) Costs of accidents and injuries to the construction industry. Journal of Construction Engineering and Management, 122(2), pp. 158-164. ISSN 0733-9364

Everett, J G and Thompson, W S (1995) Experience modification rating for workers' compensation insurance. Journal of Construction Engineering and Management, 121(1), pp. 66-79. ISSN 0733-9364

Fallah-Aliabadi, S; Ostadtaghizadeh, A; Fatemi, F; Ardalan, A; Rezaei, E; Raadabadi, M and Heydari, A (2022) Hospital disaster resilience: Development of an assessment tool using expert panel and fuzzy analytical network process. International Journal of Disaster Resilience in the Built Environment, 13(5), pp. 554-567. ISSN 1759-5916

Feng, Chen (2015) Camera marker networks for pose estimation and scene understanding in construction automation and robotics. PhD thesis, University of Michigan, USA.

Flynn, M A and Sampson, J M (2012) Trench safety-using a qualitative approach to understand barriers and develop strategies to improve trenching practices. International Journal of Construction Education and Research, 8(1), pp. 63-79. ISSN 1557-8771

Fortunato Iii, B R; Hallowell, M R; Behm, M and Dewlaney, K (2012) Identification of safety risks for high-performance sustainable construction projects. Journal of Construction Engineering and Management, 138(4), pp. 499-508. ISSN 0733-9364

Fredericks, T; Abudayyeh, O; Palmquist, M and Torres, H N (2002) Mechanical contracting safety issues. Journal of Construction Engineering and Management, 128(2), pp. 186-193. ISSN 0733-9364

Fredericks, T K; Abudayyeh, O; Choi, S D; Wiersma, M and Charles, M (2005) Occupational injuries and fatalities in the roofing contracting industry. Journal of Construction Engineering and Management, 131(11), pp. 1233-1240. ISSN 0733-9364

Fullen, M D (2009) The development, diffusion and evaluation of a fall hazard safety training program for residential construction workers utilizing instructor led and new media delivery. EdD thesis, West Virginia University, USA.

Fung, I W H and Tam, V W Y (2013) Occupational health and safety of older construction workers (aged 55 or above): Their difficulties, needs, behaviour and suitability. International Journal of Construction Management, 13(3), pp. 15-34. ISSN 1562-3599

Gambatese, J A; Michael Toole, T and Abowitz, D A (2017) Owner perceptions of barriers to prevention through design diffusion. Journal of Construction Engineering and Management, 143(7): 04017016, ISSN 0733-9364

Gambatese, J A; Pestana, C and Lee, H W (2017) Alignment between lean principles and practices and worker safety behavior. Journal of Construction Engineering and Management, 143(1): 04016083, ISSN 0733-9364

Garg, Arun (2022) Quantifying resilient safety culture using complex network theory. PhD thesis, Griffith University, Australia.

Geminiani, F L; Smallwood, J J and van Wyk, J J (2008) The effectiveness of the occupational health and safety (OH&S) inspectorate in South African construction. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Gerber, J K and Yacoubian G.S, Jr (2001) Evaluation of drug testing in the workplace: Study of the construction industry. Journal of Construction Engineering and Management, 127(6), pp. 438-444. ISSN 0733-9364

Gerstenberger, A J (2021) Modeling the likelihood of construction incidents using public data. EdD thesis, Teachers College, Columbia University, USA.

Gholizadeh, P (2022) Analyzing accidents among specialty contractors: A data mining approach. PhD thesis, George Mason University, USA.

Gholizadeh, P and Esmaeili, B (2020) Cost of occupational incidents for electrical contractors: Comparison using robust-factorial analysis of variance. Journal of Construction Engineering and Management, 146(7): 0001861, ISSN 0733-9364

Ghosh, S (2014) Does formal daily huddle meetings improve safety awareness? International Journal of Construction Education and Research, 10(4), pp. 285-299. ISSN 1557-8771

Ghosh, S; Nourihamedani, M; Reyes, M and Snyder, L (2024) Association between leading indicators of safety performance in construction projects. International Journal of Construction Education and Research, 20(2), pp. 121-135. ISSN 15578771

Ghosh, S; Nourihemadani, M and Reyes, M (2025) Effect of previous accidents and near-miss incidents on risk perceptions of construction workers. International Journal of Construction Education and Research, 21(2), pp. 213-229. ISSN 1557-8771

Gibb A, L J B P (2013) Older construction workers: Needs and abilities. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Gilkey, D P; Del Puerto, C L; Keefe, T; Bigelow, P; Herron, R; Rosecrance, J and Chen, P (2012) Comparative analysis of safety culture perceptions among homesafe managers and workers in residential construction. Journal of Construction Engineering and Management, 138(9), pp. 1044-1052. ISSN 0733-9364

Gillen, M E (1996) Nonfatal falls in construction workers: Predictors of injury severity. PhD thesis, University of California, San Francisco, USA.

Giri, O P; Sainju, P R and Htet, A (2025) Evaluating occupational health and safety practices in an airport construction project in Nepal. Built Environment Project and Asset Management, 15(1), pp. 149-164. ISSN 2044-124X

Godfrey, R J (2007) Analysis of construction worker injury information from a workers' compensation database. PhD thesis, University of Florida, USA.

Goh, Y L (2004) The effect of higher workers' compensation premium rates on construction worker wages and the reporting of injuries. PhD thesis, University of Utah, USA.

Goh, Y M (2015) Empirical investigation of the average deployment force of personal fall-arrest energy absorbers. Journal of Construction Engineering and Management, 141(1): 04014059, ISSN 0733-9364

Golabchi, A; Han, S; Seo, J; Han, S; Lee, S and Al-Hussein, M (2015) An automated biomechanical simulation approach to ergonomic job analysis for workplace design. Journal of Construction Engineering and Management, 141(8): 04015020, ISSN 0733-9364

Gonsalves, N; Afolabi, A and Akanmu, A A (2025) Impact of social influence on construction workers' intention-to-use exoskeletons. Smart and Sustainable Built Environment, 14(4), pp. 1073-1090. ISSN 2046-6099

Gonsalves, N; Akanmu, A; Gao, X; Agee, P and Shojaei, A (2023) Industry perception of the suitability of wearable robot for construction work. Journal of Construction Engineering and Management, 149(5): 04023017, ISSN 0733-9364

Goodrum, P M and Dai, J (2005) Differences in occupational injuries, illnesses, and fatalities among Hispanic and non-Hispanic construction workers. Journal of Construction Engineering and Management, 131(9), pp. 1021-1028. ISSN 0733-9364

Grosskopf, K R (2010) Post-disaster recovery and reconstruction safety training. International Journal of Disaster Resilience in the Built Environment, 1(3), pp. 322-333. ISSN 1759-5916

Guadalupe, H (2020) Safety design management processes to mitigate design errors. PhD thesis, Walden University, USA.

Guzman de la Cruz, A L (1998) Cost-performance criteria for seismic retrofitting. PhD thesis, University of Puerto Rico, Mayaguez, Puerto Roco.

Habibnezhad, M (2019) The impact of extreme virtual elevation above grade on construction workers' physiological responses, physical responses, and task performance. PhD thesis, University of Nebraska - Lincoln, USA.

Hallowell, M (2010) Cost-effectiveness of construction safety programme elements. Construction Management and Economics, 28(1), pp. 25-34. ISSN 1466433X

Hallowell, M (2010) Safety risk perception in construction companies in the Pacific Northwest of the USA. Construction Management and Economics, 28(4), pp. 403-413. ISSN 1466433X

Hallowell, M; Esmaeili, B and Chinowsky, P (2011) Safety risk interactions among highway construction work tasks. Construction Management and Economics, 29(4), pp. 417-429. ISSN 1466433X

Hallowell, M R (2008) A formal model for construction safety and health risk management. PhD thesis, Oregon State University, USA.

Hallowell, M R (2011) Risk-based framework for safety investment in construction organizations. Journal of Construction Engineering and Management, 137(8), pp. 592-599. ISSN 0733-9364

Hallowell, M R; Alexander, D and Gambatese, J A (2017) Energy-based safety risk assessment: Does magnitude and intensity of energy predict injury severity? Construction Management and Economics, 35(1-2), pp. 64-77. ISSN 01446193

Hallowell, M R; Bhandari, S and Alruqi, W (2020) Methods of safety prediction: Analysis and integration of risk assessment, leading indicators, precursor analysis, and safety climate. Construction Management and Economics, 38(4), pp. 308-321. ISSN 01446193

Hallowell, M R and Calhoun, M E (2011) Interrelationships among highly effective construction injury prevention strategies. Journal of Construction Engineering and Management, 137(11), pp. 985-993. ISSN 0733-9364

Hallowell, M R; Hardison, D and Desvignes, M (2016) Information technology and safety: Integrating empirical safety risk data with building information modeling, sensing, and visualization technologies. Construction Innovation, 16(3), pp. 323-347. ISSN 1471-4175

Hallowell, M R; Hinze, J W; Baud, K C and Wehle, A (2013) Proactive construction safety control: Measuring, monitoring, and responding to safety leading indicators. Journal of Construction Engineering and Management, 139(10): 04013010, ISSN 0733-9364

Hamid, W and Tutt, D (2019) "Thrown away like a banana leaf": Precarity of labour and precarity of place for tamil migrant construction workers in Singapore. Construction Management and Economics, 37(9), pp. 513-536. ISSN 01446193

Hamideh, Z (2013) The under-reporting of injuries for Hispanic workers in construction. PhD thesis, University of Utah, USA.

Han, S (2013) Automated monitoring and systemic analysis of workers' safety behavior in construction operations. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hanna, A S; Menches, C L; Sullivan, K T and Sargent, J R (2005) Factors affecting absenteeism in electrical construction. Journal of Construction Engineering and Management, 131(11), pp. 1212-1218. ISSN 0733-9364

Hardison, D C (2018) Hazard recognition in design: Evaluating the effects of design information on hazard recognition performance. PhD thesis, University of Colorado at Boulder, USA.

Harper, R S and Koehn, E (1998) Managing industrial construction safety in southeast Texas. Journal of Construction Engineering and Management, 124(6), pp. 452-457. ISSN 0733-9364

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Hartley, R (2016) Safety culture and climate in the construction industry: a multi-phase mixed methods investigation. PhD thesis, Loughborough University, UK.

Hasan, A and Kamardeen, I (2022) Occupational health and safety barriers for gender diversity in the Australian construction industry. Journal of Construction Engineering and Management, 148(9): 04022100, ISSN 0733-9364

Hasanzadeh, S; Dao, B; Esmaeili, B and Dodd, M D (2019) Role of personality in construction safety: Investigating the relationships between personality, attentional failure, and hazard identification under fall-hazard conditions. Journal of Construction Engineering and Management, 145(9): 04019052, ISSN 0733-9364

Hasanzadeh, S; De La Garza, J M and Geller, E S (2020) Latent effect of safety interventions. Journal of Construction Engineering and Management, 146(5): 04020033, ISSN 0733-9364

Hashem M. Mehany, M S; Killingsworth, J and Shah, S (2021) An evaluation of training delivery methods’ effects on construction safety training and knowledge retention - a foundational study. International Journal of Construction Education and Research, 17(1), pp. 18-36. ISSN 1557-8771

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(2), pp. 373-419.

He, C; McCabe, B; Jia, G and Sun, J (2020) Effects of safety climate and safety behavior on safety outcomes between supervisors and construction workers. Journal of Construction Engineering and Management, 146(1): 04019092, ISSN 0733-9364

Helen, C L; Cooke, T and Blismas, N (2010) Properties of group safety climate in construction: The development and evaluation of a typology. Construction Management and Economics, 28(10), pp. 1099-1112. ISSN 1466433X

Hellas, M S; Chaib, R and Verzea, I (2020) Artificial intelligence treating the problem of uncertainty in quantitative risk analysis (QRA). Journal of Engineering, Design and Technology, 18(1), pp. 40-54. ISSN 1726-0531

Herrera-Pérez, V.; Rubio-Romero, J. C.; Fuertes, A.; Salguero-Caparrós, F. and del Carmen Pardo-Ferreira, M. (2026) Investigating the impact of medication consumption on crane-related occupational health and safety risks in construction projects. Journal of Construction Engineering and Management, 152(8): 04026116, ISSN 0733-9364

Hide, S (2003) Exploring accident causation in the construction industry. PhD thesis, Loughborough University, UK.

Hindman, D P; Bamberg, C R and Nussbaum, M A (2014) Bracing of wood composite I-joists to resist lateral buckling from walking loads. Journal of Construction Engineering and Management, 140(9): 04014037, ISSN 0733-9364

Hinze, J and Appelgate, L L (1991) Costs of construction injuries. Journal of Construction Engineering and Management, 117(3), pp. 537-550. ISSN 0733-9364

Hinze, J and Bren, D (1996) Analysis of fatalities and injuries due to powerline contacts. Journal of Construction Engineering and Management, 122(2), pp. 177-182. ISSN 0733-9364

Hinze, J; Bren, D C and Piepho, N (1995) Experience modification rating as measure of safety performance. Journal of Construction Engineering and Management, 121(4), pp. 455-458. ISSN 0733-9364

Hinze, J; Devenport, J N and Giang, G (2006) Analysis of construction worker injuries that do not result in lost time. Journal of Construction Engineering and Management, 132(3), pp. 321-326. ISSN 0733-9364

Hinze, J and Godfrey, R (2003) An evaluation of safety performance measures for construction projects. Journal of Construction Research, 4(1), pp. 5-15. ISSN 1609-9451

Hinze, J; Hallowell, M and Baud, K (2013) Construction-safety best practices and relationships to safety performance. Journal of Construction Engineering and Management, 139(10): 04013006, ISSN 0733-9364

Hinze, J; Huang, X and Terry, L (2005) The nature of struck-by accidents. Journal of Construction Engineering and Management, 131(2), pp. 262-268. ISSN 0733-9364

Hinze, J; Pedersen, C and Fredley, J (1998) Identifying root causes of construction injuries. Journal of Construction Engineering and Management, 124(1), pp. 67-71. ISSN 0733-9364

Hinze, J and Raboud, P (1988) Safety on large building construction projects. Journal of Construction Engineering and Management, 114(2), pp. 286-293. ISSN 0733-9364

Hinze, J and Roxo, J (1984) Is injury occurrence related to lunar cycles? Journal of Construction Engineering and Management, 110(4), pp. 409-419. ISSN 0733-9364

Hinze, J and Russell, D B (1995) Analysis of fatalities recorded by OSHA. Journal of Construction Engineering and Management, 121(2), pp. 209-214. ISSN 0733-9364

Hinze, J and Wilson, G (2000) Moving toward a zero injury objective. Journal of Construction Engineering and Management, 126(5), pp. 399-403. ISSN 0733-9364

Hinze, J W (1976) The effect of middle management on safety in construction. PhD thesis, Stanford University, USA.

Holland, N and Hinze, J (2000) Daylight savings time changes and construction accidents. Journal of Construction Engineering and Management, 126(5), pp. 404-406. ISSN 0733-9364

Hon, C K H; Chan, A P C and Yam, M C H (2012) Empirical study to investigate the difficulties of implementing safety practices in the repair and maintenance sector in Hong Kong. Journal of Construction Engineering and Management, 138(7), pp. 877-884. ISSN 0733-9364

Hon, K H (2012) Relationships between safety climate and safety performance of repair, maintenance, minor alteration and addition (RMAA) works. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Hu, K (2011) Three essays on modeling complex dynamic problems in health and safety. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Hu, K; Rahmandad, H; Smith-Jackson, T and Winchester, W (2011) Factors influencing the risk of falls in the construction industry: A review of the evidence. Construction Management and Economics, 29(4), pp. 397-416. ISSN 1466433X

Hu, Y; Zhang, M; Ren, W; Li, H; Zhang, J; Wang, L and Shuai, S (2025) Detecting loss of balance in construction workers using millimeter wave sensing. Journal of Construction Engineering and Management, 151(12): 04025202, ISSN 0733-9364

Huang, J; Abadi, M; Manu, P and Cheung, C (2022) The impact of sustainability rating systems on health and safety in building projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(2), pp. 49-64. ISSN 17514304

Huang, X (2003) The owner's role in construction safety. PhD thesis, University of Florida, USA.

Huang, X; Bernd, D and Bernold, L E (1996) Innovative technology development for safe excavation. Journal of Construction Engineering and Management, 122(1), pp. 91-96. ISSN 0733-9364

Huang, X and Hinze, J (2003) Analysis of construction worker fall accidents. Journal of Construction Engineering and Management, 129(3), pp. 262-271. ISSN 0733-9364

Huang, X and Hinze, J (2006) Owner's role in construction safety: Guidance model. Journal of Construction Engineering and Management, 132(2), pp. 174-181. ISSN 0733-9364

Hubner, Marilyn (2016) Constructing safety training: Foundations of attitudes and perceptions of the construction site supervisor. PhD thesis, Victoria University, Australia.

Hulls, P M (2022) The epidemiology of health and wellbeing in the workplace: managing and measuring occupational stress and behavioural factors in a male-dominated industry. PhD thesis, University of Bristol, UK.

Hung, Y H; Smith-Jackson, T and Winchester, W (2011) Use of attitude congruence to identify safety interventions for small residential builders. Construction Management and Economics, 29(2), pp. 113-130. ISSN 1466433X

Hunt, B J P (1980) Development of a research program for scaffolding standards. DEng thesis, University of Kansas, USA.

Ibrahimkhil, M H and Hadidi, L (2023) Is the construction site a safer place under the usace or local government guidelines? The case of Afghanistan. Engineering, Construction and Architectural Management, 30(4), pp. 1379-1400. ISSN 0969-9988

Idoro, G I (2011) Comparing occupational health and safety management efforts and performance of Nigerian construction contractors. Journal of Construction in Developing Countries, 16(2), pp. 151-173. ISSN 1823-6499

Idoro, G I (2011) Effect of mechanisation on occupational health and safety performance in the Nigerian construction industry. Journal of Construction in Developing Countries, 16(2), pp. 27-45. ISSN 1823-6499

Ikpe, E; Hammon, F and Oloke, D (2012) Cost-benefit analysis for accident prevention in construction projects. Journal of Construction Engineering and Management, 138(8), pp. 991-998. ISSN 0733-9364

Ikpe, E K P P D O D (2006) The management of construction health and safety: Investigating the cost-benefit. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Ikuabe, M; Aigbavboa, C and Kissi, E (2023) Potential applications and benefits of humanoids in the construction industry: A south African perspective. International Journal of Building Pathology and Adaptation, 41(6), pp. 254-268. ISSN 23984708

Ikuma, L H; Nahmens, I and James, J (2011) Use of safety and lean integrated kaizen to improve performance in modular homebuilding. Journal of Construction Engineering and Management, 137(7), pp. 551-560. ISSN 0733-9364

Imriyas, K; Low, S P; Teo, A L and Chan, S L (2008) Premium-rating model for workers' compensation insurance in construction. Journal of Construction Engineering and Management, 134(8), pp. 601-617. ISSN 0733-9364

Imriyas, K; Pheng, L S and Teo, E A L (2007) A framework for computing workers' compensation insurance premiums in construction. Construction Management and Economics, 25(6), pp. 563-584. ISSN 1466433X

Imriyas, K; Pheng, L S and Teo, E A L (2007) A fuzzy knowledge-based system for premium rating of workers' compensation insurance for building projects. Construction Management and Economics, 25(11), pp. 1177-1195. ISSN 01446193

Inyang, N; Al-Hussein, M; El-Rich, M and Al-Jibouri, S (2012) Ergonomic analysis and the need for its integration for planning and assessing construction tasks. Journal of Construction Engineering and Management, 138(12), pp. 1370-1376. ISSN 0733-9364

Irizarry, J (2005) Safety issues in steel erection: Impact on task durations and risk perception of ironworkers. PhD thesis, Purdue University, USA.

Irizarry, J and Abraham, D M (2006) Assessment of risk perception of ironworkers. Journal of Construction Research, 7(1), pp. 111-132. ISSN 1609-9451

Irizarry, J; Simonsen, K L and Abraham, D M (2005) Effect of safety and environmental variables on task durations in steel erection. Journal of Construction Engineering and Management, 131(12), pp. 1310-1319. ISSN 0733-9364

Irumba, R (2015) Modelling of construction safety performance and housing markets in Kampala, Uganda. PhD thesis, KTH Royal Institute of Technology, Sweden.

Jacobs, A (2007) Will the new offence of corporate manslaughter motivate companies to prioritise safety over profit? PhD thesis, University of Birmingham, UK.

Jaselskis, E J and Suazo, G A R (1994) A survey of construction site safety in Honduras. Construction Management and Economics, 12(3), pp. 245-255. ISSN 01446193

Jazayeri, E (2019) Hazard recognition and risk perception among union electricians. PhD thesis, University of Kentucky, USA.

Jeelani, I (2019) Improving safety performance in construction using visual data analytics and virtual reality. PhD thesis, North Carolina State University, USA.

Jeelani, I; Albert, A; Han, K and Azevedo, R (2018) Are visual search patterns predictive of hazard recognition performance? Empirical investigation using eye-tracking technology. Journal of Construction Engineering and Management, 145(1): 04018115, ISSN 0733-9364

Jiang, W; Ding, L and Zhou, C (2021) Cyber physical system for safety management in smart construction site. Engineering, Construction and Architectural Management, 28(3), pp. 788-808. ISSN 0969-9988

Jirsaraei, M. J.; Lee, S.; DeStefano, S.; Gerber, L. H.; Ji, W. and Sikdar, S. (2026) Multidomain analysis of chronic pain intensity in labor-intensive occupations: Insights from network and regression modeling. Journal of Construction Engineering and Management, 152(8): 04026110, ISSN 0733-9364

Johnson, H M; Singh, A and Young, R H F (1998) Fall protection analysis for workers on residential roofs. Journal of Construction Engineering and Management, 124(5), pp. 418-428. ISSN 0733-9364

Jones, C (2014) Assessing safety culture and safety performance in a high hazard industry. PhD thesis, University of Nottingham, UK.

Jung, S (2010) Facility siting and layout optimization based on process safety. PhD thesis, Texas A&M University, USA.

Jung, Y J (2007) Subsurface utility engineering for highway projects: A study of utility impact rating and benefit-cost analysis. PhD thesis, Pennsylvania State University, USA.

Kalampakorn, S (2000) Stages of construction workers' use of hearing protection. PhD thesis, University of Michigan, USA.

Kamardeen, I (2007) A fuzzy knowledge-based system for premium-rating of workers' compensation insurance for construction projects. PhD thesis, National University of Singapore, Singapore.

Kamardeen, I (2010) 8d BIM modelling tool for accident prevention through design. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Kamardeen, I and Hasan, A (2022) Occupational health and safety implications of an aging workforce in the Australian construction industry. Journal of Construction Engineering and Management, 148(10): 04022112, ISSN 0733-9364

Kang, Y-J (2000) Minimum life-cycle cost structural design against natural hazards. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Karimi, H and Taghaddos, H (2020) Impact of age on the strength of experience and education role in fatal injuries prevention in Iranian construction craft workers. Journal of Construction Engineering and Management, 146(7): 04020070, ISSN 0733-9364

Kazan, E E (2013) Analysis of fatal and nonfatal accidents involving earthmoving equipment operators and on-foot workers. PhD thesis, Wayne State University, USA.

Ketabi, A B and Heravi, G (2022) Developing a framework for evaluating construction project safety levels and optimal cost allocation to safety influential factors. Engineering, Construction and Architectural Management, 29(2), pp. 643-668. ISSN 0969-9988

Khalid, M; Yusuf, A; Akanmu, A; Murzi, H and Awolusi, I (2024) The impact of individual differences in developing computational thinking and sensor data analytics skills in construction engineering education. International Journal of Construction Education and Research, 20(4), pp. 483-500. ISSN 1557-8771

Khan, M R and Sonawane, A (2020) Prediction of impact response in construction safety helmet using FEA. Journal of Engineering, Design and Technology, 18(3), pp. 557-566. ISSN 1726-0531

Khan, S B; Proverbs, D G and Xiao, H (2022) The motivation of operatives in small construction firms towards health and safety: a conceptual framework. Engineering, Construction and Architectural Management, 29(1), pp. 245-261. ISSN 0969-9988

Khawam, A A (2017) Project manager's role in safety performance of Saudi construction firms: A correlational study. PhD thesis, University of Phoenix, USA.

Killingsworth, J; Mehany, M H and Ladhari, H (2021) General contractors’ experience using off-site structural framing systems. Construction Innovation, 21(1), pp. 40-63. ISSN 1471-4175

Kim, D.; Yang, J.; Lee, D.; Lee, D.; Rahimian, F. and Park, C. (2026) Blockchain-enhanced computer vision approach for remote safety inspection in construction. Engineering, Construction and Architectural Management, 33(3), pp. 1907-1931. ISSN 0969-9988

Kim, C (2004) Spatial information acquisition and its use for infrastructure operation and maintenance. PhD thesis, University of Texas at Austin, USA.

Kim, K; Cho, Y and Kim, K (2018) BIM-driven automated decision support system for safety planning of temporary structures. Journal of Construction Engineering and Management, 144(8): 04018072, ISSN 0733-9364

Kim, K; Jeong, I and Cho, Y K (2023) Signal processing and alert logic evaluation for IoT-based work zone proximity safety system. Journal of Construction Engineering and Management, 149(2): 05022018, ISSN 0733-9364

Kim, Y A; Ryoo, B Y; Kim, Y S and Huh, W C (2013) Major accident factors for effective safety management of highway construction projects. Journal of Construction Engineering and Management, 139(6), pp. 628-640. ISSN 0733-9364

Kiral, I A and Demirkesen, S (2023) Assessing the impact of peripheral vision on construction site safety. Engineering, Construction and Architectural Management, 30(9), pp. 4435-4463. ISSN 0969-9988

Kukoyi, P O and Smallwood, J J (2017) A qualitative study of health and safety construction practices in Lagos. Journal of Construction Business and Management, 1(1), pp. 1-7. ISSN 2521-0165

Kulkarni, V S and Devalkar, R V (2019) Postural analysis of building construction workers using ergonomics. International Journal of Construction Management, 19(6), pp. 464-471. ISSN 1562-3599

Kurtzer, D; Blackmore, N; Farrugia, N and Chileshe, N (2020) Productivity enablers and inhibiting health and wellbeing practices of South Australian construction site-based workers: A qualitative study. International Journal of Construction Management, 20(8), pp. 882-899. ISSN 1562-3599

Lam, S-W (2001) Construction safety education in Hong Kong. PhD thesis, International University of Fundamental Studies, Russia.

Lan, Roy Uzoma (2025) Advancing workplace safety through intelligent monitoring: Applications of artificial intelligence and computer vision in high-risk industrial environments. PhD thesis, The University of Texas at San Antonio, USA.

Lashgari, Martin (2014) Comparative study of base-isolated and fixed-base buildings using a damage/cost approach. PhD thesis, University of Nebraska - Lincoln, USA.

Laufer, A and Ledbetter, W B (1986) Assessment of safety performance measures at construction sites. Journal of Construction Engineering and Management, 112(4), pp. 530-542. ISSN 0733-9364

Law, Matthew E (2023) Occupational risk perceptions among foreign-born construction workers in central Florida. DPh thesis, Walden University, USA.

Lee, W; Lin, K Y; Johnson, P W and Seto, E Y W (2022) Selection of wearable sensor measurements for monitoring and managing entry-level construction worker fatigue: A logistic regression approach. Engineering, Construction and Architectural Management, 29(8), pp. 2905-2923. ISSN 0969-9988

Lee, Y Y R; Samad, H and Miang Goh, Y (2020) Perceived importance of authentic learning factors in designing construction safety simulation game-based assignment: Random forest approach. Journal of Construction Engineering and Management, 146(3): 04020002, ISSN 0733-9364

Lees, H and Austin, J (2011) The case for behaviour-based safety in construction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(1), pp. 3-8. ISSN 17514312

Lestari, R I; Guo, B H W and Goh, Y M (2019) Causes, solutions, and adoption barriers of falls from roofs in the Singapore construction industry. Journal of Construction Engineering and Management, 145(5): 4019027, ISSN 0733-9364

Leung, M Y; Chan, Y S and Yuen, K W (2010) Impacts of stressors and stress on the injury incidents of construction workers in Hong Kong. Journal of Construction Engineering and Management, 136(10), pp. 1093-1103. ISSN 0733-9364

Li, S; Cai, H and Kamat, V R (2016) Integrating natural language processing and spatial reasoning for utility compliance checking. Journal of Construction Engineering and Management, 142(12): 04016074, ISSN 0733-9364

Li, X; Han, S; Gül, M; Al-Hussein, M and El-Rich, M (2018) 3D visualization-based ergonomic risk assessment and work modification framework and its validation for a lifting task. Journal of Construction Engineering and Management, 144(1): 04017093, ISSN 0733-9364

Li, X; Li, H; Skitmore, M and Wang, F (2022) Understanding the influence of safety climate and productivity pressure on non-helmet use behavior at construction sites: A case study. Engineering, Construction and Architectural Management, 29(1), pp. 72-90. ISSN 0969-9988

Liang, D (2001) Improved reliability and economic modeling for new and retrofitted low-rise structures subjected to extreme wind hazards. PhD thesis, State University of New York at Buffalo, USA.

Liao, L; Gan, C; Yang, J and Liang, Y (2025) Impacts of safety capacity and personalized safety training on construction workers' hazard recognition using eye-tracking technology. Journal of Construction Engineering and Management, 151(6): 04025050, ISSN 0733-9364

Lin, J; Xing, R and Cai, Y (2026) Advancing safer construction hris: A multisourced approach for diagnosing unsafe behavior tendencies. Journal of Construction Engineering and Management, 152(2): 04025247, ISSN 0733-9364

Lindhard, S M; Lassen, A H; Cheng, Y; Musso, M; Wang, G and Bai, S (2025) The potential of exoskeletons in construction: barriers and challenges. Construction Innovation, 25(4), pp. 1231-1249. ISSN 1471-4175

Lingard, H.; Cooke, T. and Gharaie, E. (2013) A case study analysis of fatal incidents involving excavators in the Australian construction industry. Engineering, Construction and Architectural Management, 20(5), pp. 488-504. ISSN 0969-9988

Lingard, H (2002) The effect of first aid training on Australian construction workers' occupational health and safety knowledge and motivation to avoid work-related injury or illness. Construction Management and Economics, 20(3), pp. 263-273. ISSN 01446193

Lingard, H; Cooke, T and Blismas, N (2011) Coworkers' response to occupational health and safety: An overlooked dimension of group-level safety climate in the construction industry. Engineering, Construction and Architectural Management, 18(2), pp. 159-175. ISSN 0969-9988

Lingard, H; Cooke, T and Blismas, N (2012) Do perceptions of supervisors' safety responses mediate the relationship between perceptions of the organizational safety climate and incident rates in the construction supply chain? Journal of Construction Engineering and Management, 138(2), pp. 234-241. ISSN 0733-9364

Lingard, H; Cooke, T and Gharaie, E (2013) The how and why of plant-related fatalities in the Australian construction industry. Engineering, Construction and Architectural Management, 20(4), pp. 365-380. ISSN 0969-9988

Lingard, H; Raj, I S; Lythgo, N; Troynikov, O and Fitzgerald, C (2019) The impact of tool selection on back and wrist injury risk in tying steel reinforcement bars: A single case experiment. Construction Economics and Building, 19(1), pp. 1-19. ISSN 2204-9029

Lingard, H and Saunders, A (2004) Occupational rehabilitation in the construction industry of Victoria. Construction Management and Economics, 22(10), pp. 1091-1101. ISSN 01446193

Lingard, H; Wakefield, R and Cashin, P (2011) The development and testing of a hierarchical measure of project OHS performance. Engineering, Construction and Architectural Management, 18(1), pp. 30-49. ISSN 0969-9988

Lingard, H and Yesilyurt, Z (2003) The effect of attitudes on the occupational safety actions of Australian construction workers: The results of a field study. Journal of Construction Research, 4(1), pp. 59-69. ISSN 1609-9451

Lingard, H; Zhang, R P; Blismas, N; Wakefield, R and Kleiner, B (2015) Are we on the same page? Exploring construction professionals' mental models of occupational health and safety. Construction Management and Economics, 33(1), pp. 73-84. ISSN 01446193

Lingard, H C; Cooke, T and Blismas, N (2010) Safety climate in conditions of construction subcontracting: A multi-level analysis. Construction Management and Economics, 28(8), pp. 813-825. ISSN 1466433X

Liu, D (2009) Multi-phase empirical investigation and path modeling of construction workers' use of personal fall arrest systems. PhD thesis, Ohio State University, USA.

Liu, D and Li, C (2025) Construction hazard-recognition training for generation Z students: A comparison study based on eye-movement data. Engineering, Construction and Architectural Management, 32(6), pp. 4029-4050. ISSN 0969-9988

Liu, M (2019) Video-based human motion capture and force estimation for comprehensive on-site ergonomic risk assessment. PhD thesis, University of Michigan, USA.

Liu, M; Han, S and Lee, S (2016) Tracking-based 3D human skeleton extraction from stereo video camera toward an on-site safety and ergonomic analysis. Construction Innovation, 16(3), pp. 348-367. ISSN 1471-4175

Liu, Q; Xu, N; Jiang, H; Wang, S; Wang, W and Wang, J (2020) Psychological driving mechanism of safety citizenship behaviors of construction workers: Application of the theory of planned behavior and norm activation model. Journal of Construction Engineering and Management, 146(4): 04020027, ISSN 0733-9364

Liu, Y; Xiang, Q; Goh, Y M; Ye, G and Shao, Z (2025) Exploring the mechanism of risk perception failure of construction workers from a capability-demand balance perspective. Journal of Construction Engineering and Management, 151(2): 04024196, ISSN 0733-9364

Lopez Del Puerto, C; Clevenger, C M; Boremann, K and Gilkey, D P (2014) Exploratory study to identify perceptions of safety and risk among residential Latino construction workers as distinct from commercial and heavy civil construction workers. Journal of Construction Engineering and Management, 140(2): 04013048, ISSN 0733-9364

Loudoun, R and Markwell, K (2017) Energy drink consumption in the Australian construction industry: A risky new trend? Journal of Construction Engineering and Management, 143(8): 04017039, ISSN 0733-9364

Loudoun, R J (2010) Injuries sustained by young males in construction during day and night work. Construction Management and Economics, 28(12), pp. 1313-1320. ISSN 1466433X

Love, P E D and Teo, P (2017) Statistical analysis of injury and nonconformance frequencies in construction: Negative binomial regression model. Journal of Construction Engineering and Management, 143(8): 05017011, ISSN 0733-9364

Lu, Xueqing (2021) Examining safety behaviour on construction sites using virtual reality. PhD thesis, University of New South Wales, Australia.

Luo, X; Li, X; Song, X and Liu, Q (2023) Convolutional neural network algorithm-based novel automatic text classification framework for construction accident reports. Journal of Construction Engineering and Management, 149(12): 04023128, ISSN 0733-9364

Luo, Xiaowei (2013) Requirements, specifications and deployment models for autonomous jobsite safety proximity monitoring. PhD thesis, University of Texas at Austin, USA.

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Lyu, S; Hon, C K H; Chan, A P C; Javed, A A; Zhang, R P and Wong, F K W (2020) An exploratory study of safety communication networks of ethnic minority crews in the Hong Kong construction industry. Engineering, Construction and Architectural Management, 28(4), pp. 1156-1175. ISSN 0969-9988

Lyu, S; Hon, C K H; Chan, A P C; Jiang, X and Skitmore, M (2023) Critical factors affecting the safety communication of ethnic minority construction workers. Journal of Construction Engineering and Management, 149(2): 04022173, ISSN 0733-9364

Ma, L; Guo, H and Fang, Y (2021) Analysis of construction workers' safety behavior based on Myers-Briggs type indicator personality test in a bridge construction project. Journal of Construction Engineering and Management, 147(1): 04020149, ISSN 0733-9364

Maguire, K J P (2008) Risk, culture, and organization: a study of injury among construction workers. PhD thesis, University of Salford, UK.

Mansoor, A; Liu, S; Ali, G M; Bouferguene, A and Al-Hussein, M (2023) A deep-learning classification framework for reducing communication errors in dynamic hand signaling for crane operation. Journal of Construction Engineering and Management, 149(2): 4022167, ISSN 0733-9364

Manu, P; Poghosyan, A; Mahamadu, A M; Mahdjoubi, L; Gibb, A; Behm, M and Akinade, O O (2019) Design for occupational safety and health: Key attributes for organisational capability. Engineering, Construction and Architectural Management, 26(11), pp. 2614-2636. ISSN 0969-9988

Manu, P A (2012) An investigation into the accident causal influence of construction project features. PhD thesis, University of Wolverhampton, UK.

Marin Ramirez, L S (2014) Safety climate, safety hazards and organizational practices in the construction industry in Colombia. ScD thesis, University of Massachusetts Lowell, USA.

Marín, L S and Roelofs, C (2017) Promoting construction supervisors' safety-efficacy to improve safety climate: Training intervention trial. Journal of Construction Engineering and Management, 143(8): 4017037, ISSN 0733-9364

Mason, J (1999) The impact of total quality management on construction worker safety. PhD thesis, University of South Florida, USA.

McCaa, B M (2021) Leadership style needed within small construction companies to optimize a safety climate. PhD thesis, Adler University, USA.

McCabe, B Y; Alderman, E; Chen, Y; Hyatt, D E and Shahi, A (2017) Safety performance in the construction industry: Quasi-longitudinal study. Journal of Construction Engineering and Management, 143(4): 04016113, ISSN 0733-9364

McConnell, C W (2004) Predictors of work injuries: A quantitative exploration of level of English proficiency as a predictor of work injuries in the construction industry. PhD thesis, Colorado State University, USA.

McConnell, C W; Gloeckner, G and Gilley, J (2006) Predictors of work injuries: A quantitative exploration of level of english proficiency as a predictor of work injuries in the construction industry. International Journal of Construction Education and Research, 2(1), pp. 3-28. ISSN 1557-8771

McFarland, T C; Ryu, J; Haas, C T and Abdel-Rahman, E M (2024) Crafting safe and efficient masonry practices: Quantitative assessment of postural characteristics in movement strategies. Journal of Construction Engineering and Management, 150(2): 04023159, ISSN 0733-9364

McKay, L J (2010) The effect of offsite construction on occupational health and safety. PhD thesis, Loughborough University, UK.

McKillop, R; Hare, B and Lawani, K (2022) Evaluating the health and safety practices of construction small and medium-sized enterprise leaders. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

McKnight, P (2018) Strategies small construction business managers use to reduce safety incidents in their organization. DBA thesis, Walden University, USA.

Meldrum, A (2009) Measuring worker engagement as an aspect of health and safety performance in the construction industry: towards a best practice tool. PhD thesis, Glasgow Caledonian University, UK.

Melzner, J; Zhang, S; Teizer, J and Bargstädt, H J (2013) A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), pp. 661-674. ISSN 1466433X

Memarian, B (2012) Development of high reliability construction work systems: Lessons from production practices of high performance work crews. PhD thesis, Arizona State University, USA.

Memarian, B; Brooks, S B and Le, J C (2023) Obstacles and solutions to implementing job hazard analysis in construction: A case study. International Journal of Construction Education and Research, 19(2), pp. 187-198. ISSN 1557-8771

Messi, Leonardo (2022) Development of a BIM-based simulator for workspace management in construction. PhD thesis, Università Politecnica delle Marche, Italy.

Miceli, A; Bevill, G and Simsiriwong, J (2025) Effect of additively manufactured polymeric inserts on impact response of construction safety helmets. Journal of Engineering, Design and Technology, 23(5), pp. 1653-1665. ISSN 1726-0531

Misnan, M S and Mohammed, A H (2007) Development of safety culture in the construction industry: A conceptual framework. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Mitropoulos, P and Guillama, V (2011) A framework of task demand factors for residential framing. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(1), pp. 19-27. ISSN 17514312

Mohandes, S R (2020) Towards improvements to the occupational health and safety in construction industry. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Mohd Latif, H; Essah, E A and Donyavi, S (2024) Creating a link between healthy homes and architectural elements: a qualitative study of modern residential buildings. International Journal of Building Pathology and Adaptation, 42(4), pp. 637-652. ISSN 23984708

Mohd Zainudin, N (2019) Identification and analysis of worker safety hazards in Midwest agribusiness construction work sites. Unpublished PhD thesis, Iowa State University, USA.

Moohialdin, A S M; Lamari, F; Miska, M and Trigunarsyah, B (2023) Proximity activity intensity identification system in hot and humid weather conditions: Development and implementation. Journal of Construction Engineering and Management, 149(12): 04023122, ISSN 0733-9364

Mouri, M M; Han, W; Xu, L; Ghasemi, A; Loh, W Y; Zhu, Z and Dai, F (2026) Assessing impacts of drone-induced distraction on postural stability of roofers during shingle installation on inclined surfaces. Journal of Construction Engineering and Management, 152(6): 04026061, ISSN 0733-9364

Mousavi, S Y and Kariminia, S (2022) Analysis of human behavior in case of fire inside a high-rise building: Effect of risk perception and individual's location. International Journal of Building Pathology and Adaptation, 40(4), pp. 441-461. ISSN 23984708

Mun, H.; Jeong, J.; Jeong, J. and Kumi, L. (2026) Unsupervised learning approach for benchmark models to identify construction projects with high accident risk levels. Engineering, Construction and Architectural Management, 33(5), pp. 3777-3798. ISSN 0969-9988

Mwanaki Alinaitwe, H (2008) Improvement of labour performance and productivity in Uganda's building industry. PhD thesis, Lund University, Sweden.

Mwemezi, B R; Kikwasi, G J and Phoya, S (2024) Perception of masonry workers on health and safety risks in informal construction sites in Dar es Salaam, Tanzania. International Journal of Construction Management, 24(12), pp. 1305-1313. ISSN 1562-3599

Nafe Assafi, M.; Wang, J.; Ma, J. and Cotton, J. (2026) Assessing the impact of eye-tracking features on construction hazard identification skills using virtual reality and machine learning. Construction Innovation, 26(5), pp. 1614-1635. ISSN 1471-4175

Namian, M (2017) Factors affecting construction hazard recognition and safety risk perception. PhD thesis, North Carolina State University, USA.

Namian, M; Albert, A and Feng, J (2018) Effect of distraction on hazard recognition and safety risk perception. Journal of Construction Engineering and Management, 144(4): 04018008, ISSN 0733-9364

Namian, M; Albert, A; Zuluaga, C M and Behm, M (2016) Role of safety training: Impact on hazard recognition and safety risk perception. Journal of Construction Engineering and Management, 142(12): 04016073, ISSN 0733-9364

Namian, M; Albert, A; Zuluaga, C M and Jaselskis, E J (2016) Improving hazard-recognition performance and safety training outcomes: Integrating strategies for training transfer. Journal of Construction Engineering and Management, 142(10): 04016048, ISSN 0733-9364

Namian, M; Nabil, F R; Al-Mhdawi, M K S; Kermanshachi, S S and Nnaji, C (2024) Postpandemic era: Investigating the impact of COVID-19 on construction workers' situational awareness. Journal of Construction Engineering and Management, 150(9): 04024103, ISSN 0733-9364

Navon, R and Kolton, O (2006) Model for automated monitoring of fall hazards in building construction. Journal of Construction Engineering and Management, 132(7), pp. 733-740. ISSN 0733-9364

Nghitanwa, E M (2016) Development of practical guidelines to promote occupational health and safety for workers in the construction industry in Windhoek, Namibia. DLittPhil thesis, University of South Africa, South Africa.

Nguyen, L D; Tran, D Q and Chandrawinata, M P (2016) Predicting safety risk of working at heights using Bayesian networks. Journal of Construction Engineering and Management, 142(9): 04016041, ISSN 0733-9364

Nielsen, K J (2017) A comparison of inspection practices within the construction industry between the Danish and Swedish work environment authorities. Construction Management and Economics, 35(3), pp. 154-169. ISSN 01446193

Nielsen, K J; Törner, M; Pousette, A and Grill, M (2023) National culture and occupational safety: A comparison of worker-level factors impacting safety for Danish and Swedish construction workers. Construction Management and Economics, 41(6), pp. 445-456. ISSN 01446193

Ning, X; Zhai, F; Xia, N and Hu, X (2024) Protecting the ego: Anticipated image risk as a psychological deterrent to construction workers' safety citizenship behavior. Journal of Construction Engineering and Management, 150(1): 04023146, ISSN 0733-9364

Nnaji, C; Gambatese, J; Karakhan, A and Eseonu, C (2019) Influential safety technology adoption predictors in construction. Engineering, Construction and Architectural Management, 26(11), pp. 2655-2681. ISSN 0969-9988

Nnaji, C; Gambatese, J; Karakhan, A and Osei-Kyei, R (2020) Development and application of safety technology adoption decision-making tool. Journal of Construction Engineering and Management, 146(4): 04020028, ISSN 0733-9364

Nwaogu, J M; Chan, A P C; Hon, C K H and Darko, A (2020) Review of global mental health research in the construction industry: A science mapping approach. Engineering, Construction and Architectural Management, 27(2), pp. 385-410. ISSN 0969-9988

Nwaogu, J M; Chan, A P C; Sunindijo, R Y; Darko, A; Yang, J Y and Salihu, D (2023) Prevalence and risk factors for poor mental health and suicidal ideation in the Nigerian construction industry. Journal of Construction Engineering and Management, 149(3): 05022021, ISSN 0733-9364

Nyateka, N; Dainty, A R J; Gibb, A G and Phil Bust, P D (2012) Evaluating the role and effectiveness of training interventions in improving the occupational health and safety of younger construction workers: A literature review. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Obiaigwe, Innocent Onyeka (2025) Robotizing safety: Prospects and barriers of robotic technology adoption for construction injury prevention in the UK. PhD thesis, University of Salford, UK.

Obiozo, R N and Smallwood, J J (2015) Biophilic construction site model: Enhancing the motivational and humanistic value of the green construction site. Journal of Construction Engineering and Management, 141(3), ISSN 0733-9364

Oguz Erkal, E D (2022) Predicting serious injury and fatality exposure in construction industry. PhD thesis, University of Colorado at Boulder, USA.

Oguz Erkal, E D; Hallowell, M R and Bhandari, S (2021) Practical assessment of potential predictors of serious injuries and fatalities in construction. Journal of Construction Engineering and Management, 147(10): 04021129, ISSN 0733-9364

Oguz Erkal, E D; Hallowell, M R; Ghriss, A and Bhandari, S (2024) Predicting serious injury and fatality exposure using machine learning in construction projects. Journal of Construction Engineering and Management, 150(3): 04023169, ISSN 0733-9364

Ohtsu, N; Hokugo, A; Cruz, A M; Sato, Y; Araki, Y and Park, H (2023) Evacuation of vulnerable people during a Natech: A case study of a flood and factory explosion in Japan. International Journal of Disaster Resilience in the Built Environment, 14(1), pp. 53-67. ISSN 1759-5916

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Okpala, I; Nnaji, C and Gambatese, J (2023) Assessment tool for human-robot interaction safety risks during construction operations. Journal of Construction Engineering and Management, 149(1): 04022145, ISSN 0733-9364

Okpala, I U (2022) Robotics and automation in construction: Developing foundational insight and tools to support safe implementation. PhD thesis, University of Alabama, USA.

Oni, O Z; Olanrewaju, A and Khor, S C (2024) Sustainable model for improving construction industry health and safety practices. Journal of Construction Engineering and Management, 150(10): 04024137, ISSN 0733-9364

Oni, O Z; Olanrewaju, A and Khor, S C (2024) Fuzzy synthetic evaluation of the factors affecting health and safety practices in Malaysia construction industry. Journal of Engineering, Design and Technology, 22(6), pp. 1773-1796. ISSN 1726-0531

Onososen, A; Musonda, I and Molusiwa, R (2023) Evaluating the health and safety practices of human-robot teams. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Orvik, C. P. and Albrechtsen, E. (2026) The mismatch between conceptualization and measurements of safety performance: Insights from a qualitative study of the Norwegian construction industry. Construction Management and Economics, 44(5), pp. 319-336. ISSN 0144-6193

Osei-Asibey, D; Ayarkwa, J; Acheampong, A; Adinyira, E and Amoah, P (2023) Impacts of accidents and hazards on the Ghanaian construction industry. International Journal of Construction Management, 23(4), pp. 708-717. ISSN 1562-3599

Ouyang, Y; Huang, G and He, S (2025) Design of safety warnings and risk perception inducement: A comparative study between safety signs and safety comics in construction workplaces. Engineering, Construction and Architectural Management, 32(7), pp. 4834-4851. ISSN 0969-9988

Pakjouei, S; Aryankhesal, A; Kamali, M; Seyedin, H and Heidari, M (2021) Positive effects of earthquake from the perspective of people with physical disability in Iran. International Journal of Disaster Resilience in the Built Environment, 12(2), pp. 157-169. ISSN 1759-5916

Palmer, R C (2014) Common law environmental protection: The future of private nuisance, Part I. International Journal of Law in the Built Environment, 6(1-2), pp. 21-42. ISSN 1756-1450

Park, J; Kim, K and Cho, Y K (2017) Framework of automated construction-safety monitoring using cloud-enabled BIM and BLE mobile tracking sensors. Journal of Construction Engineering and Management, 143(2): 05016019, ISSN 0733-9364

Park, M W; Elsafty, N and Zhu, Z (2015) Hardhat-wearing detection for enhancing on-site safety of construction workers. Journal of Construction Engineering and Management, 141(9): 4015024, ISSN 0733-9364

Patching, Alan (2019) Attitudes to psychological stress awareness, avoidance and management in organisations engaged in construction project management: A comparison with business at large. PhD thesis, Bond University, Australia.

Patel, D A (2015) Estimating the number of fatal accidents and investigating the determinants of safety performance in indian construction. PhD thesis, Indian Institute of Technology Delhi, India.

Patel, D A and Jha, K N (2016) An estimate of fatal accidents in Indian construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Patel, M; Sherratt, F and Farrell, P (2012) Exploring human error through the safety talk of utilities distribution operatives. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Patriarca, A S (2013) Safety at the margins: A rhetorical analysis of occupational risk communication in construction. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Pereira, E.; Penner, J. and Ghorab, K. (2026) Integrating energy-based safety with gamified experiential learning for hazard-recognition training. Journal of Construction Engineering and Management, 152(8): 04026129, ISSN 0733-9364

Perez Jimenez, P A (2019) An investigation into health and safety management by SMEs and the risk of corporate manslaughter prosecution. PhD thesis, University of Wolverhampton, UK.

Perttula, P; Merjama, J; Kiurula, M and Laitinen, H (2003) Accidents in materials handling at construction sites. Construction Management and Economics, 21(7), pp. 729-736. ISSN 01446193

Pesantes-Tavares, E R (2011) Construction worker health: A web-based approach to selecting alternatives to hazardous procedures. PhD thesis, University of Florida, USA.

Pinion Jr., C (2013) The impact of job control on employee perception of management commitment to safety in an engineering, procurement and construction company. DPh thesis, University of Texas School of Public Health, USA.

Priyadarshini, Shalini (2025) Setu: Safety in excavation and trenching for you a training and decision-making support tool for worker safety in excavation and trenching operations in construction. PhD thesis, Carnegie Mellon University, USA.

Qiao, J; Wang, C; Guan, S and Shuran, L (2022) Construction-accident narrative classification using shallow and deep learning. Journal of Construction Engineering and Management, 148(9): 04022088, ISSN 0733-9364

Quaigrain, R A and Issa, M H (2018) Development and validation of disability management indicators for the construction industry. Journal of Engineering, Design and Technology, 16(1), pp. 81-100.

Quaigrain, R A and Issa, M H (2023) Comparative analysis of leading and lagging indicators of construction disability management performance: An exploratory study. International Journal of Construction Management, 23(7), pp. 1205-1213. ISSN 1562-3599

Quaigrain, R A; Owusu-Manu, D G; Edwards, D J; Hammond, M; Hammond, M and Martek, I (2024) Occupational health and safety orientation in the oil and gas industry of Ghana: Analysis of knowledge and attitudinal influences on compliance. Journal of Engineering, Design and Technology, 22(3), pp. 795-812. ISSN 1726-0531

Quarmby, T (2011) Safe, healthy and sustainable demolition. PhD thesis, Loughborough University, UK.

Raheem, A A (2014) Developing a framework for a reciprocal safety implementation system (RSIS) in the pakistani construction industry. PhD thesis, University of Florida, USA.

Rajendran, S and Gambatese, J A (2009) Development and initial validation of sustainable construction safety and health rating system. Journal of Construction Engineering and Management, 135(10), pp. 1067-1075. ISSN 0733-9364

Rajendran, S; Gambatese, J A and Behm, M G (2009) Impact of green building design and construction on worker safety and health. Journal of Construction Engineering and Management, 135(10), pp. 1058-1066. ISSN 0733-9364

Rantsatsi, N P (2021) Improving construction health and safety agent collaboration and health and safety performance in the South African construction industry. PhD thesis, University of Johannesburg, South Africa.

Rashidi, A; Woon, G L; Dasandara, M; Bazghaleh, M and Pasbakhsh, P (2025) Smart personal protective equipment for intelligent construction safety monitoring. Smart and Sustainable Built Environment, 14(3), pp. 835-858. ISSN 2046-6099

Reiman, A; Møller Pedersen, L; Väyrynen, S; Airaksinen, O; Sormunen, E and Räsänen, T (2020) Multi-organisational approach to safety training: The case of a Finnish safety training park. Construction Management and Economics, 38(7), pp. 659-672. ISSN 01446193

Riaz, Z (2008) Improving construction plant safety using advanced ICT. PhD thesis, Loughborough University, UK.

Robertson, C M (2018) Migrant worker perceptions of life, work, health and safety in Kuwait: A construction industry perspective. PhD thesis, Auckland University of Technology, New Zealand.

Rodriguez, J L (2020) Psychosocial safety climate, psychosocial safety behavior, and injury reporting among Latino and Non-Latino construction workers in New York city: A correlational study. PhD thesis, Northcentral University, USA.

Rosario-Rosado, R V (2004) Race/Hispanicity and use of alcohol and illicit drugs in the United States construction industry. DPh thesis, University of North Texas Health Science Center at Fort Worth, USA.

Rubio-Romero, J C; Rubio, M C and García-Hernández, C (2013) Analysis of construction equipment safety in temporary work at height. Journal of Construction Engineering and Management, 139(1), pp. 9-14. ISSN 0733-9364

Rwamamara, R; Norberg, H; Olofsson, T and Lagerqvist, O (2010) Using visualization technologies for design and planning of a healthy construction workplace. Construction Innovation, 10(3), pp. 248-266. ISSN 1471-4175

Rwamamara, R and Simonsson, P (2009) Health and safety in concrete casting processes. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Rwamamara, R A (2007) Planning the healthy construction workplace through risk assessment and design methods. PhD thesis, Luleå University of Technology, Sweden.

Ryu, J; Alwasel, A; Haas, C T and Abdel-Rahman, E M (2020) Analysis of relationships between body load and training, work methods, and work rate: Overcoming the novice mason's risk hump. Journal of Construction Engineering and Management, 146(8): 04020097, ISSN 0733-9364

Salas, R I (2020) Empirical evaluation of construction safety: Insights from economic trends, national cultures and workplace injury rates. PhD thesis, University of Colorado at Boulder, USA.

Samman, R A and Graham, I (2007) The six sigma project management strategy. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Schmidt, J R (1997) Quantifying the impact of construction accidents using predictive models. PhD thesis, State University of New York at Buffalo, USA.

Schofield, K E (2012) Risk factors for injuries in small and medium sized construction companies. PhD thesis, University of Minnesota, USA.

Schuler, M. L.; Albertson, L.; Katz, L. E.; Armanios, D. E. and Faust, K. M. (2026) Drawn from experience: Coproducing a graphic guide with arctic water sector workers. Journal of Construction Engineering and Management, 152(9): 04026146, ISSN 0733-9364

Schwatka, N V (2014) Managing through measurement: Occupational health and safety in the construction industry. PhD thesis, Colorado State University, USA.

Shaurette, M (2011) Safety and health education for demolition and reconstruction. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 164(3), pp. 129-138. ISSN 17514312

Shayboun, M; Kifokeris, D and Koch, C (2020) Machine learning for analysis of occupational accidents registration data. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Shen, X (2017) Location-based leading indicators in BIM for construction safety. PhD thesis, University of Alabama, USA.

Shen, X; Marks, E; Pradhananga, N and Cheng, T (2016) Hazardous proximity zone design for heavy construction excavation equipment. Journal of Construction Engineering and Management, 142(6): 05016001, ISSN 0733-9364

Shewchuk, J P and Guo, C (2012) Panel stacking, panel sequencing, and stack locating in residential construction: Lean approach. Journal of Construction Engineering and Management, 138(9), pp. 1006-1016. ISSN 0733-9364

Shi, X; Qiao, Y; Zhao, X; Liu, Y; Liu, C; Huang, R and Cui, Y (2025) Improving emergency evacuation capacity for subway stations based on agent-based modelling. Construction Innovation, 25(6), pp. 1865-1881. ISSN 1471-4175

Shi, Z (2024) A BIM-based and data-driven approach for comprehensive façade inspection guidance in cities. PhD thesis, New York University Tandon School of Engineering, USA.

Shuang, Q; Liu, X; Wang, Z and Xu, X (2024) Automatically categorizing construction accident narratives using the deep-learning model with a class-imbalance treatment technique. Journal of Construction Engineering and Management, 150(9): 04024107, ISSN 0733-9364

Sing, C P; Love, P E D; Fung, I W H and Edwards, D J (2014) Personality and occupational accidents: Bar benders in Guangdong Province, Shenzhen, China. Journal of Construction Engineering and Management, 140(7): 05014005, ISSN 0733-9364

Smallwood, J (1998) Client influence on contractor health and safety in South Africa. Building Research & Information, 26(3), pp. 181-189. ISSN 0961-3218

Smallwood, J (2006) Scaffolding health and safety: A multi-stakeholder issue. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Smallwood, J (2007) The influence of architectural designers on construction ergonomics. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Smallwood, J and Venter, D (2001) The role of the media in South African construction health and safety. Construction Economics and Building, 1(2), pp. 37-46. ISSN 2204-9029

Smallwood, J J and Emuze, F (2016) Factors that promote zero fatalities, injuries, and disease in construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Smallwood, J J and Haupt, T C (2009) Construction ergonomics: Perspectives of female and male production workers. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Sobeih, T; Salem, O; Genaidy, A; Abdelhamid, T S and Shell, R (2009) Psychosocial factors and musculoskeletal disorders in the construction industry. Journal of Construction Engineering and Management, 135(4), pp. 267-277. ISSN 0733-9364

Sobeih, T M (2006) Work compatibility and musculoskeletal disorders among construction workers. PhD thesis, University of Cincinnati, USA.

Solomon, T (2021) Change blindness in the construction industry. PhD thesis, George Mason University, USA.

Sousa, R L (2010) Risk analysis for tunneling projects. PhD thesis, Massachusetts Institute of Technology, USA.

Spangenberg, S; Hannerz, H and Tüchsen, F (2005) Hospitalized injuries among bridge and tunnel construction workers. Construction Management and Economics, 23(3), pp. 237-240. ISSN 01446193

Sparer, E H (2015) Improving health and safety in construction: The intersection of programs and policies, work organization, and safety climate. DSc thesis, Harvard University, USA.

Speiser, K and Teizer, J (2024) Automatic creation of personalised virtual construction safety training in digital twins. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(4), pp. 173-183. ISSN 17514304

Spielholz, P; Davis, G and Griffith, J (2006) Physical risk factors and controls for musculoskeletal disorders in construction trades. Journal of Construction Engineering and Management, 132(10), pp. 1059-1068. ISSN 0733-9364

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Stopforth, R; Proctor-Parker, C and Davrajh, S (2019) Analysis of a low-cost anthropomorphic sensory platform for the world first minibus test. Journal of Engineering, Design and Technology, 17(2), pp. 434-455. ISSN 1726-0531

Stover, B D (2004) Validation and evaluation of a disability measure for upper extremity musculoskeletal disorder screening in the workplace and prognostic factors of long-term disability. PhD thesis, University of Washington, USA.

Stubbs, D A (1975) Trunk stresses in construction workers. PhD thesis, University of Surrey, UK.

Sung, W-K (2017) Factors motivating construction safety knowledge sharing in online social media. PhD thesis, University of Hong Kong, Hong Kong.

Sunindijo, R Y and Kamardeen, I (2017) Work stress is a threat to gender diversity in the construction industry. Journal of Construction Engineering and Management, 143(10): 04017073, ISSN 0733-9364

Talabi, B; Edum-Fotwe, F and Gibb, A (2019) Personal attributes of supervisors: Are these the key to transforming construction safety in the UK? Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 101-111. ISSN 17514304

Tam, V W Y; Fung, I W H; Jorge Evangelista, A C J and Wong, S W L (2025) Assistant robotic machine for Hong Kong construction industry. International Journal of Construction Management, 25(14), pp. 1749-1754. ISSN 1562-3599

Tang, S L; Lee, H K and Wong, K (1997) Safety cost optimization of building projects in Hong Kong. Construction Management and Economics, 15(2), pp. 177-186. ISSN 01446193

Tang, Y; Liu, C; Feng, K; Yang, X; Li, X and Leng, X (2025) Identifying struck-by hazards in unknown lifting loads: A hybrid computer vision approach. Journal of Construction Engineering and Management, 151(10): 04025146, ISSN 0733-9364

Teizer, J (2006) Real-time spatial modeling to detect and track resources on construction sites. PhD thesis, University of Texas at Austin, USA.

Teizer, J (2016) Right-time vs real-time pro-active construction safety and health system architecture. Construction Innovation, 16(3), pp. 253-280. ISSN 1471-4175

Teo, P and Love, P E D (2017) Re-examining the association between quality and safety performance in construction: From heterogeneous to homogeneous datasets. Journal of Construction Engineering and Management, 143(6): 04017011, ISSN 0733-9364

Thodelius, C (2018) Rethinking injury events: Explorations in spatial aspects and situational prevention strategies. PhD thesis, Chalmers University of Technology, Sweden.

Thompson, O (2020) Towards a comprehensive understanding of human behaviour in dwelling fires. PhD thesis, University of Greenwich, UK.

Tixier, A J P; Hallowell, M R; Albert, A; Van Boven, L and Kleiner, B M (2014) Psychological antecedents of risk-taking behavior in construction. Journal of Construction Engineering and Management, 140(11): 4014052, ISSN 0733-9364

Tixier, A J-P (2015) Leveraging unstructured construction injury reports to predict safety outcomes and model safety risk using natural language processing, machine learning, and probability theory. PhD thesis, University of Colorado at Boulder, USA.

Trethewy, R W (2003) OHS performance: improved indicators for construction contractors. Journal of Construction Research, 4(1), pp. 17-27. ISSN 1609-9451

Trethewy, R W; Atkinson, M and Falls, B (2003) Improved hazard identification for contractors in the construction industry. Journal of Construction Research, 4(1), pp. 71-85. ISSN 1609-9451

Trethewy, Ross (2002) Influences on subcontractor OHS management outcomes in construction. PhD thesis, University of New South Wales, Australia.

Trompf, Peggy (2012) Another brick in the wall: Responses of the state to workplace fatalities in the New South Wales construction industry. PhD thesis, University of Sydney, Australia.

Tudor, L G (1987) Modeling OSHA's inspection decision and the compliance decision of the firm. PhD thesis, George Washington University, USA.

Tumbare, M J (2013) Sedimentation of small and medium sized dams: Discussion issues. Journal of Engineering, Design and Technology, 11(2), pp. 112-128. ISSN 1726-0531

Turner, M and Lingard, H (2020) Examining the interaction between bodily pain and mental health of construction workers. Construction Management and Economics, 38(11), pp. 1009-1023. ISSN 01446193

Tymvios, N and Gambatese, J A (2016) Direction for generating interest for design for construction worker safety: a Delphi study. Journal of Construction Engineering and Management, 142(8): 4016024, ISSN 0733-9364

Tymvios, N and Gambatese, J A (2016) Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners. Journal of Construction Engineering and Management, 142(2): 04015078, ISSN 0733-9364

Uddin, S M J (2023) Leveraging social media platforms and generative AI technologies for construction industry applications. PhD thesis, North Carolina State University, USA.

Uddin, S M J; Albert, A and Karakhan, A A (2024) Leveraging YouTube to aid Construction Hazard Prevention through Design (CHPtD). Construction Management and Economics, 42(9), pp. 847-865. ISSN 01446193

Uddin, S M J; Albert, A; Pradhananga, N; Ganapati, N E and Prajapati, J (2023) Health and safety challenges among post-disaster reconstruction workers. Construction Economics and Building, 23(1-2), pp. 4-30. ISSN 2204-9029

Ulubeyli, S; Arslan, V and Kivrak, S (2014) Cartoons on occupational health and safety: Semiotic analysis of workers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Umar, T (2021) Applications of drones for safety inspection in the gulf cooperation council construction. Engineering, Construction and Architectural Management, 28(9), pp. 2337-2360. ISSN 0969-9988

Usman, W. I.; Mazher, K. M.; Umer, W.; Wuni, I. Y.; Alshibani, A.; Ghaithan, A.; Nasir, A. R. and Mohammed, A. (2026) BIM-based construction accidents knowledge database management system: Centralized accessible information repository for enhanced learning from the past. Journal of Construction Engineering and Management, 152(9): 04026149, ISSN 0733-9364

Valluru, Charan T (2022) The subcontractor safety problem: Hidden, variable, and outsider work. PhD thesis, Griffith University, Australia.

Vargas, C A (1998) Investigating construction falls using fault tree analysis and developing a prototype tool to reduce falls using expert system and computer-assisted instruction methods. PhD thesis, Ohio State University, USA.

Velikova, M; Baker, H and Smith, S D (2018) The meaning of failure: Establishing a taxonomy of failure in the construction industry to improve organisational learning. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Wade III, L R (2004) Effect of exposure to an inclined surface and height on gait kinematics and postural stability. PhD thesis, Auburn University, USA.

Wamuziri, S (2008) Improving safety performance in construction through cultural change. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Wan, H P; Zhang, W J; Ge, H B; Luo, Y and Todd, M D (2023) Improved vision-based method for detection of unauthorized intrusion by construction sites workers. Journal of Construction Engineering and Management, 149(7): 04023040, ISSN 0733-9364

Wan, R H J; Jia, A Y and Goh, Y M (2021) Managing climatic heat stress in Singapore: State of the practice and wearables on site. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Wanberg, J; Harper, C; Hallowell, M R and Rajendran, S (2013) Relationship between construction safety and quality performance. Journal of Construction Engineering and Management, 139(10): 04013004, ISSN 0733-9364

Wang, Y. and Zou, P. X. W. (2026) Uncovering key construction injury causal factors using topic modeling and word co-occurrence network analysis methods. Journal of Construction Engineering and Management, 152(10): 04026168, ISSN 0733-9364

Wang, D; Dai, F and Ning, X (2015) Risk assessment of work-related musculoskeletal disorders in construction: State-of-the-art review. Journal of Construction Engineering and Management, 141(6): 04015008, ISSN 0733-9364

Wang, D; Dai, F; Ning, X; Dong, R G and Wu, J Z (2017) Assessing work-related risk factors on low back disorders among roofing workers. Journal of Construction Engineering and Management, 143(7): 04017026, ISSN 0733-9364

Wang, H (2000) A follow-up study of workers with soft tissue injuries using the databases of the Ontario workplace safety and insurance board (WSIB). PhD thesis, University of Toronto, Canada.

Wang, R; Lee, C J; Hsu, S C and Chen, J H (2021) Preventing or encouraging illegal activities by construction firms: Effects of top management team compensation and aspiration-performance discrepancies. Engineering, Construction and Architectural Management, 28(6), pp. 1739-1760. ISSN 0969-9988

Wang, S; Park, S; Kim, J and Kim, J (2025) Safety helmet monitoring on construction sites using yolov10 and advanced transformer architectures with surveillance and body-worn cameras. Journal of Construction Engineering and Management, 151(11): 04025186, ISSN 0733-9364

Wang, Y (2017) Zero incident safety management for continued safety improvement. PhD thesis, Polytechnic Institute of New York University, USA.

Wehle, A J (2014) Taxonometric model for using leading safety indicators in the construction industry. PhD thesis, University of Florida, USA.

Weinstein, M; Gambatese, J and Hecker, S (2005) Can design improve construction safety? Assessing the impact of a collaborative safety-in-design process. Journal of Construction Engineering and Management, 131(10), pp. 1125-1134. ISSN 0733-9364

Wetzel, E M (2016) The use of a BIM-based framework to support safe facility management processes. PhD thesis, Virginia Tech, USA.

Whalen, T M; Gopal, S and Abraham, D M (2004) Cost-benefit model for the construction of tornado shelters. Journal of Construction Engineering and Management, 130(6), pp. 772-779. ISSN 0733-9364

Wijeratne, W M P U; Perera, B A K S and De Silva, L (2014) Identification and assessment risks in maintenance operations. Built Environment Project and Asset Management, 4(4), pp. 384-405. ISSN 2044-124X

Wiley, K J L L (2003) The relationship between HR safety practices and organizational safety outcomes. PhD thesis, University of Iowa, USA.

Windapo, A (2013) Relationship between degree of risk, cost and level of compliance to occupational health and safety regulations in construction. Construction Economics and Building, 13(2), pp. 67-82. ISSN 2204-9029

Windapo, A and Oladapo, A (2012) Determinants of construction firms' compliance with health and safety regulations in South Africa. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Wong, Y F (2002) The occupational health and safety in Taiwan, 1987-1999. PhD thesis, University of Wales College of Cardiff, UK.

Wronska, M (2023) Designing and evaluating a participatory workplace nutrition intervention to improve the health and wellbeing of blue-collar (construction) workers. PhD thesis, University of Salford, UK.

Wu, Shaoze (2024) Enhancing construction workforce safety through formulating an augmented reality digital twin system. PhD thesis, RMIT University, Australia.

Xiang, Jianjun (2014) Extreme heat and workers' health in South Australia: Association, perceptions, and adaptations in the workplace. PhD thesis, University of Adelaide, Australia.

Xu, D; Agyekum, K; Manu, P; Cheung, C; Che Ibrahim, C K I; Mahamadu, A M and Perez, P A (2026) Design for safety (dfs) implementation in the construction industry: A study of design professionals in Northern China. Journal of Engineering, Design and Technology, 24(1), pp. 1-23. ISSN 1726-0531

Yang, K (2018) Sensing workers' responsive behaviors for identifying safety hazards in construction. PhD thesis, University of Nebraska - Lincoln, USA.

Yeh, Y C; Hsu, D S and Kuo, Y H (1991) Expert system for diagnosing damage of prestressed concrete pile. Journal of Construction Engineering and Management, 117(1), pp. 13-26. ISSN 0733-9364

Young, D D (2024) A qualitative investigation into adverse safety behaviors by non-English speaking construction employees. DBA thesis, National University, USA.

Young-Corbett, D E (2014) Prevention through design: Health hazards in asphalt roofing. Journal of Construction Engineering and Management, 140(9): 06014007, ISSN 0733-9364

Yu, H; Oloke, D; Proverbs, D and Buckley, K (2005) Improving health and safty in construction: A knowledge-based approach. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Yu, X; Mehmood, K; Paulsen, N; Ma, Z and Kwan, H K (2021) Why safety knowledge cannot be transferred directly to expected safety outcomes in construction workers: The moderating effect of physiological perceived control and mediating effect of safety behavior. Journal of Construction Engineering and Management, 147(1): 1965, ISSN 0733-9364

Yuan, X (2016) A cyber-physical systems (CPS) approach to temporary structures monitoring. PhD thesis, Pennsylvania State University, USA.

Zaalouk, A and Han, S (2021) Parameterized design optimization framework for worker-friendly workplaces in modular construction. Journal of Construction Engineering and Management, 147(5): 04021030, ISSN 0733-9364

Zech, W C (2004) Enhancing work zone safety. PhD thesis, State University of New York at Buffalo, USA.

Zhang, F (2022) A hybrid structured deep neural network with word2vec for construction accident causes classification. International Journal of Construction Management, 22(6), pp. 1120-1140. ISSN 1562-3599

Zhang, J; Eastham, D L and Bernold, L E (2005) Waste-based management in residential construction. Journal of Construction Engineering and Management, 131(4), pp. 423-430. ISSN 0733-9364

Zhang, M; Cao, Z; Yang, Z and Zhao, X (2020) Utilizing computer vision and fuzzy inference to evaluate level of collision safety for workers and equipment in a dynamic environment. Journal of Construction Engineering and Management, 146(6): 04020051, ISSN 0733-9364

Zhang, R P; Cheung, C M and Lei, H (2019) Applications of visualisation technology in construction safety training: A preliminary review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Zhang, R P and McDermott, V (2017) Corporate governance, incentive schemes, and safety performance in the construction industry. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Zhang, W; Xue, N; Zhang, J and Zhang, X (2021) Identification of critical causal factors and paths of tower-crane accidents in China through system thinking and complex networks. Journal of Construction Engineering and Management, 147(12): 04021174, ISSN 0733-9364

Zhang, X; Li, Y and Wu, D (2020) Developing an underground utility occupation index for efficient urban utilities planning. Journal of Construction Engineering and Management, 146(5): 04020036, ISSN 0733-9364

Zhang, Z (2021) Participatory ergonomics in construction: Enabling practice-to-research-to-practice via the 2safemodel. PhD thesis, University of Washington, USA.

Zhao, D (2015) Exploring construction safety and control measures through electrical fatalities. PhD thesis, Virginia Tech, USA.

Zhao, D; McCoy, A P; Kleiner, B M; Du, J and Smith-Jackson, T L (2016) Decision-making chains in electrical safety for construction workers. Journal of Construction Engineering and Management, 142(1): 04015055, ISSN 0733-9364

Zhao, D; McCoy, A P; Kleiner, B M; Smith-Jackson, T L and Liu, G (2016) Sociotechnical systems of fatal electrical injuries in the construction industry. Journal of Construction Engineering and Management, 142(1): 04015056, ISSN 0733-9364

Zhao, J (2020) Towards a proactive real-time data-driven musculoskeletal disorders prevention approach in construction. PhD thesis, Pennsylvania State University, USA.

Zou, P X W; Shi, V Y and Li, Z (2010) An econometric evaluation framework for investment in construction safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Zou, P X W and Zhang, G (2009) Comparative study on the perception of construction safety risks in China and Australia. Journal of Construction Engineering and Management, 135(7), pp. 620-627. ISSN 0733-9364

Zuluaga, C M; Albert, A and Arroyo, P (2018) Protecting bridge maintenance workers from falls: Evaluation and selection of compatible fall protection supplementary devices. Journal of Construction Engineering and Management, 144(8): 04018073, ISSN 0733-9364

Zuluaga Santa, C M (2018) Protecting bridge maintenance workers: Evaluating fall protection supplementary devices using virtual prototyping and wearable technology. PhD thesis, North Carolina State University, USA.

de Leon, D E (1996) Integrating socioeconomics in the development of criteria for optimal aseismic design of r/c buildings. PhD thesis, University of California, Irvine, USA.

de Moraes Goulart, F.; Joseph, A.; Jiang, Y.; Shokrollahi Ardekani, M. and Chandrika Bhanu, A. (2026) Healthcare staff evaluation of an emergency department mental health room: A virtual reality study. Building Research & Information, 54(5), pp. 632-651. ISSN 0961-3218

van Brenk, H (2014) Exploring how construction workers interpret the efficacy of leadership traits. DM thesis, University of Phoenix, USA.