Items with Index Term: hydraulic

Abdeen, F N; Gunatilaka, R N; Sepasgozar, S M E and Edwards, D J (2024) The usability of a novel mobile augmented reality application for excavation process considering safety and productivity in construction. Construction Innovation, 24(4), pp. 892-911. ISSN 1471-4175

Al-Hussein, M; Alkass, S and Moselhi, O (2005) Optimization algorithm for selection and on site location of mobile cranes. Journal of Construction Engineering and Management, 131(5), pp. 579-590. ISSN 0733-9364

Alam, M K and Hasan, M D R (2010) Protection works against wave attacks in the haor areas of Bangladesh: Analysis of sustainability. Journal of Construction in Developing Countries, 15(2), pp. 69-85. ISSN 1823-6499

Ali, G M; Kosa, J; Bouferguene, A and Al-Hussein, M (2021) Competitive assessment of ice and frozen silt mat for crane ground support using finite-element analysis. Journal of Construction Engineering and Management, 147(6): 04021038, ISSN 0733-9364

Ali Khan, M S; Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(1), pp. 196-210.

Borba, Maria Lucia Guilherme (2014) Technical-scientific and sociopolitical aspects of urban water management: Stormwater drainage in the city of São Paulo. PhD thesis, Universidade de São Paulo, Brazil.

Brizendine, A L (1997) Risk based analysis of levees. PhD thesis, West Virginia University, USA.

Cable, J K; Jaselskis, E J; Walters, R C; Li, L and Bauer, C R (2009) Stringless Portland cement concrete paving. Journal of Construction Engineering and Management, 135(11), pp. 1253-1260. ISSN 0733-9364

Cheah, Charmaine Yi Ting (2017) Development of a methodology to quantify installation damage on geotextile for coastal application. PhD thesis, Queensland University of Technology, Australia.

Cho, Y K; Haas, C T; Sreenivasan, S V and Liapi, K (2004) Position error modeling for automated construction manipulators. Journal of Construction Engineering and Management, 130(1), pp. 50-58. ISSN 0733-9364

Cummings, S; McDougall, J A and Swaffield, J A (2007) Hydraulic assessment of non-circular-section building drainage. Building Research & Information, 35(3), pp. 316-328. ISSN 0961-3218

Edwards, D; Parn, E A; Sing, M C P and Thwala, W D (2019) Risk of excavators overturning: Determining horizontal centrifugal force when slewing freely suspended loads. Engineering, Construction and Architectural Management, 26(3), pp. 479-498. ISSN 0969-9988

Edwards, D J (1999) A methodology for predicting the total average hourly maintenance cost of tracked hydraulic excavators operating in the UK opencast mining industry. PhD thesis, University of Wolverhampton, UK.

Edwards, D J and Holt, G D (2000) Estivate: A model for calculating excavator productivity and output costs. Engineering, Construction and Architectural Management, 7(1), pp. 52-62. ISSN 0969-9988

Edwards, D J and Holt, G D (2000) Quantifying the cost of plant operators' productivity. Journal of Financial Management of Property and Construction, 5(1-2), pp. 85-92. ISSN 1366-4387

Edwards, D J and Holt, G D (2001) Predicting construction plant maintenance expenditure. Building Research & Information, 29(6), pp. 417-427. ISSN 0961-3218

Edwards, D J; Holt, G D and Harris, F C (1998) Financial management of construction plant: Conceptualising cost prediction. Journal of Financial Management of Property and Construction, 3(2), pp. 59-74. ISSN 1366-4387

Edwards, D J; Holt, G D and Harris, F C (1999) Predicting maintenance expenditure on construction plant: Model development and performance analysis. Journal of Financial Management of Property and Construction, 4(1), pp. 31-46. ISSN 1366-4387

Edwards, D J; Holt, G D and Harris, F C (2000) A model for predicting plant maintenance costs. Construction Management and Economics, 18(1), pp. 65-75. ISSN 01446193

Edwards, D J; Holt, G D and Harris, F C (2000) Estimating life cycle plant maintenance costs. Construction Management and Economics, 18(4), pp. 427-435. ISSN 01446193

Edwards, D J; Holt, G D and Harris, F C (2002) Predicting downtime costs of tracked hydraulic excavators operating in the UK opencast mining industry. Construction Management and Economics, 20(7), pp. 581-591. ISSN 01446193

Edwards, D J; Thorpe, T and Love, P (2004) Financial implications of poorly utilised construction plant and equipment. Journal of Financial Management of Property and Construction, 9(1), pp. 3-12. ISSN 1366-4387

Edwards, D J and Yisa, S (2001) Modelling the magnitude of plant downtime: A tool for improving plant operations management. Engineering, Construction and Architectural Management, 8(3), pp. 225-232. ISSN 0969-9988

Egger, C S (2015) Sewer rehabilitation planning under uncertainty. PhD thesis, ETH Zürich, Switzerland.

Elazouni, A M and Basha, I M (1996) Evaluating the performance of construction equipment operators in Egypt. Journal of Construction Engineering and Management, 122(2), pp. 109-114. ISSN 0733-9364

Farzin, A; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Fenis, S M; Diekmann, J E and Huang, P Y (1995) A GIS-based pipeline planning system. Engineering, Construction and Architectural Management, 2(3), pp. 227-238. ISSN 0969-9988

Gormley, M and Campbell, D P (2006) Modelling water reduction effects: Method and implications for horizontal drainage. Building Research & Information, 34(2), pp. 131-144. ISSN 0961-3218

Graca, Moacyr Eduardo Alves da (1985) Formulation of a model for evaluation of the determinant conditions for secondary vent need in buildings' drainage systems. PhD thesis, Universidade de São Paulo, Brazil.

Greene, I; Lokuge, W and Karunasena, W (2020) Structural design of floodways under extreme flood loading. International Journal of Disaster Resilience in the Built Environment, 11(4), pp. 535-555. ISSN 1759-5916

Grimm, Alec G (2023) Modeling and monitoring construction site sediment control measures to improve design, performance, and longevity. PhD thesis, Ohio State University, USA.

Grist, E (2014) The implementation of innovative and sustainable construction materials. EngD thesis, University of Bath, UK.

Guo, Z; Xu, X; Gao, X; Xu, Y; Liu, J; Zhang, M and Li, F (2025) Enhanced risk-based quality control for hydraulic engineering construction projects considering the risk-influencing mechanism. Journal of Construction Engineering and Management, 151(2): 04024204, ISSN 0733-9364

Hegab, M Y and Smith, G R (2007) Delay time analysis in microtunneling projects. Journal of Construction Engineering and Management, 133(2), pp. 191-195. ISSN 0733-9364

Hughes, P J; O’Connor, J T and Traver, A E (1989) Pipe manipulator enhancements for increased automation. Journal of Construction Engineering and Management, 115(3), pp. 412-423. ISSN 0733-9364

Huong, H T L and Dzung, L H (2020) Criteria for flood warning levels in Vietnam. International Journal of Disaster Resilience in the Built Environment, 11(5), pp. 645-658. ISSN 1759-5916

Jackson, F (2006) Biodegradable hydraulic fluids: Reducing oil-related pollution in the construction industry. PhD thesis, Nottingham Trent University, UK.

Kranz, C N (2021) Optimizing compost incorporation for stormwater infiltration, runoff quality, and vegetation establishment in post-construction soils. PhD thesis, North Carolina State University, USA.

Lee, E B; Roesler, J; Harvey, J T and Ibbs, C W (2002) Case study of urban concrete pavement reconstruction on Interstate 10. Journal of Construction Engineering and Management, 128(1), pp. 49-56. ISSN 0733-9364

Li, L; Cheng, M; Tu, K; Ding, R; Zhang, J and Xu, B (2025) Human-machine interface based on constraint velocity polytope for safe and efficient operation of large-size hydraulic manipulator. Journal of Construction Engineering and Management, 151(7): 04025082, ISSN 0733-9364

Locicero, Ryan Charles Robert (2015) Mainstreaming green infrastructure: The nexus of infrastructure and education using the green space based learning (gsbl) approach for bioretention plant selection. PhD thesis, University of South Florida, USA.

Lucke, T and Beecham, S (2011) Field investigation of clogging in a permeable pavement system. Building Research & Information, 39(6), pp. 603-615. ISSN 0961-3218

Lv, Y; Feng, J; Wang, G and Li, H (2024) Stability characteristics and experiment of hydraulic drive four-wheel chassis. Journal of Engineering, Design and Technology, 22(2), pp. 598-612. ISSN 1726-0531

Malhotra, M; Sahu, V; Srivastava, A and Misra, A K (2020) Experimental and numerical investigation of the effect of pre-existing utility tunnel on the bearing capacity of shallow footing in sandy soils. Journal of Engineering, Design and Technology, 18(3), pp. 513-529. ISSN 1726-0531

Marti, P; Trümpi, S and Heinzmann, D (2009) Hydraulic joint for pipe jacking. Journal of Construction Engineering and Management, 135(6), pp. 439-447. ISSN 0733-9364

Massoudi, A R (1995) Utilization of plant condition monitoring with reference to the Iranian construction industry. PhD thesis, Swansea University, UK.

Merdinger, C J (1949) A history of civil engineering. PhD thesis, University of Oxford, UK.

Moon, S and Bernold, L E (1998) Graphic-based human-machine interface for construction manipulator control. Journal of Construction Engineering and Management, 124(4), pp. 305-314. ISSN 0733-9364

Msomi, V and Oliver, G J (2016) Smart morphing based on shape memory alloy plate. Journal of Engineering, Design and Technology, 14(3), pp. 475-488.

Nielsen, Y and Özbay, F O (2000) Information flow models for large scale public projects. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Oloke, D (2003) Development of a web-based off-highway plant information system. PhD thesis, University of Wolverhampton, UK.

Ostovar, M (2023) Environmental and social life cycle assessment (LCA) in transport infrastructure. PhD thesis, University of California, Davis, USA.

Paik, S M; Leviakangas, P and Choi, J (2022) Making most of BIM in design: Analysis of the importance of design coordination. International Journal of Construction Management, 22(12), pp. 2225-2233. ISSN 1562-3599

Paliari, José Carlos (2008) Method for the prognosis of productivity and the unitary consumption of materials: Hydraulic building systems. PhD thesis, Universidade de São Paulo, Brazil.

Pham Vu Hong, S and Nguyen Thanh, V (2023) Application of artificial intelligence algorithm to optimize the design of water distribution system. International Journal of Construction Management, 23(16), pp. 2830-2840. ISSN 1562-3599

Pushpakumara, B H J and Thusitha, G A (2021) Development of a structural health monitoring tool for underwater concrete structures. Journal of Construction Engineering and Management, 147(10): 04021135, ISSN 0733-9364

Pérez, Z G (2005) Appropriate designs and appropriating irrigation systems : Irrigation infrastructure development and users' management capability in Bolivia. PhD thesis, Wageningen University and Research, Netherlands.

Raduenz, Henrique (2022) On machine learning-based control for energy management in construction machines. PhD thesis, Universidade Federal de Santa Catarina, Brazil.

Ryu, S R; Rhee, K N; Yeo, M S and Kim, K W (2008) Strategies for flow rate balancing in radiant floor heating systems. Building Research & Information, 36(6), pp. 625-637. ISSN 0961-3218

Sandy, T (2018) High-accuracy mobile manipulation for on-site robotic building construction. DSc thesis, ETH Zürich, Switzerland.

Schexnayder, C J and David, S A (2002) Past and future of construction equipment: part iv. Journal of Construction Engineering and Management, 128(4), pp. 279-286. ISSN 0733-9364

Shah, D D; Jain, S K and Prybella, R W (1993) Performance of remotely controlled fiberglass pipe jacking system. Journal of Construction Engineering and Management, 119(4), pp. 832-851. ISSN 0733-9364

Shaurette, M (2015) Higher hourly cost compensation for heavy equipment used in demolition activity. International Journal of Construction Education and Research, 11(4), pp. 280-291. ISSN 1557-8771

Snyder, J R; Stephenson, L C; Mackie, J E and Smith, S D (2016) Agent-based modelling and the byzantine: Understanding the construction of antiquity's largest infrastructure project. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Song, S H; Choi, J O and Cho, H (2024) Transportation-induced impact on a prefinished volumetric modular house using trailer bogie: Case study. Journal of Construction Engineering and Management, 150(7): 05024007, ISSN 0733-9364

Sousa, Rita dos Santos (2019) Production planning and control methodology for soil bioengineering works. PhD thesis, Universidade Federal de Santa Maria, Brazil.

Stanic, N (2016) Assessment methods for structural and hydraulic properties of concrete sewer pipes. PhD thesis, Delft University of Technology, Netherlands.

Sun, Q; He, L; Ding, F; Chen, X; Ding, L and Tu, Y (2021) Modeling and analysis of structure parameters on the lifting force for power catwalk. Journal of Engineering, Design and Technology, 19(1), pp. 187-202. ISSN 1726-0531

Tatum, C B; Vorster, M and Klingler, M (2006) Innovations in earthmoving equipment: New forms and their evolution. Journal of Construction Engineering and Management, 132(9), pp. 987-997. ISSN 0733-9364

Taylor, D D J (2018) Tools for managing intermittent water supplies. PhD thesis, Massachusetts Institute of Technology, USA.

Tian, D; Li, M; Han, S and Shen, Y (2022) A novel and intelligent safety-hazard classification method with syntactic and semantic features for large-scale construction projects. Journal of Construction Engineering and Management, 148(10): 04022109, ISSN 0733-9364

Tian, D; Liu, H; Chen, S; Li, M and Liu, C (2022) Human error analysis for hydraulic engineering: Comprehensive system to reveal accident evolution process with text knowledge. Journal of Construction Engineering and Management, 148(9): 04022093, ISSN 0733-9364

Tran, T X M; Malano, H M and Thompson, R G (2003) Application of the analytic hierarchy process to prioritise irrigation asset renewals: The case of the la khe irrigation scheme, Vietnam. Engineering, Construction and Architectural Management, 10(6), pp. 382-390. ISSN 0969-9988

Van Bohemen, H D (2004) Ecological engineering and civil engineering works. PhD thesis, Delft University of Technology, Netherlands.

Van Noortwijk, J M (1996) Optimal maintenance decisions for hydraulic structures under isotropic deterioration. PhD thesis, Delft University of Technology, Netherlands.

Wahalathantri, B; Lokuge, W; Karunasena, W and Setunge, S (2018) Quantitative assessment of flood discharges and floodway failures through cross-cultivation of advancement in knowledge and traditional practices. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 435-456. ISSN 1759-5916

Wang, F.; Zhou, J. and Zheng, X. (2026) Identification of hydraulic engineering construction accident causes using instruction tuning and structured prompting in large language models. Journal of Construction Engineering and Management, 152(8): 04026122, ISSN 0733-9364

Wang, S; Zhu, S and Yuen, P L (2021) Assessment of ground-borne vibration impact on nearby underground facilities induced by ground surface excavation. Journal of Construction Engineering and Management, 147(7): 04021071, ISSN 0733-9364

Wild, S (1996) Observations on the use of ground waste clay brick as a cement replacement material. Building Research & Information, 24(1), pp. 35-40. ISSN 0961-3218

Wong, K C (2021) Factors affecting behavior of roadside construction workers in using personal protective equipment against dust and noise. PhD thesis, University of Hong Kong, Hong Kong.

Wong, M K (2006) A study of capacity predictions for driven piles by dynamic pile testing. PhD thesis, University of Hong Kong, Hong Kong.

Wright, G B and Jack, L B (2013) Property-level stormwater drainage systems: Integrated flow simulation and whole-life costs. Building Research & Information, 41(2), pp. 223-236. ISSN 0961-3218

Wurthmann, K A (2023) Designing photovoltaic arrays for groundwater pumping for remote agriculture using synthetically generated daily rainfall and irrigation needs. Journal of Engineering, Design and Technology, 21(6), pp. 1803-1826. ISSN 1726-0531

Zarghami, S A and Gunawan, I (2020) A domain-specific measure of centrality for water distribution networks. Engineering, Construction and Architectural Management, 27(2), pp. 341-355. ISSN 0969-9988

Zarghami, S A and Gunawan, I (2021) The emergence and evolution of reliability theory for water distribution networks. Built Environment Project and Asset Management, 11(2), pp. 251-265. ISSN 2044-124X

Zhang, Y (2009) Research on hydraulic engineering construction management decision support system based on network analysis method (in Chinese). PhD thesis, Beijing University of Aeronautics and Astronautics, China.

Zhou, Y; Liang, H; Foo, Z L; Koh, Y Z and Yeoh, J K W (2026) Audio-based excavator preoperational checks using few-shot deep learning. Journal of Construction Engineering and Management, 152(1): 04025212, ISSN 0733-9364

Zhou, J; Zheng, X; Wang, F and Tian, D (2025) Intelligent identification approach for accident causation in hydraulic and hydropower engineering construction. Journal of Construction Engineering and Management, 151(12): 04025195, ISSN 0733-9364

d'Apolito, L and Hong, H (2020) Forklift truck performance simulation and fuel consumption estimation. Journal of Engineering, Design and Technology, 18(3), pp. 689-703. ISSN 1726-0531