Items with Index Term: humidity

Abou Houraira, A; Ouali, A; Elhammoumi, O and Fekri, A (2023) Effect of accelerated aging by temperature and moisture variation cycles on the durability of concrete. International Journal of Building Pathology and Adaptation, 41(3), pp. 533-548. ISSN 23984708

Agyekum, K; Akli-Nartey, E E K; Kukah, A S and Agyekum, A K (2023) Importance-performance analysis (IPA) of the indoor environmental quality (IEQ) of an edge-certified building in Ghana. International Journal of Building Pathology and Adaptation, 41(1), pp. 73-95. ISSN 23984708

Amorim, Adriana Eloa Bento (2020) Construction workers remote estimate of the wbgt index in outdoor activities on concrete slabs. PhD thesis, Universidade Estadual de Campinas, Brazil.

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Bahammou, Y; Kouhila, M; Moussaoui, H; Lamsyehe, H; Tagnamas, Z; Lamharrar, A and Idlimam, A (2022) Evaluation of the influence of ambient air temperature and air velocity on mortar cement durability using a forced convection solar dryer. International Journal of Building Pathology and Adaptation, 40(4), pp. 462-480. ISSN 23984708

Bebelaar, N; Braggaar, R C; Kleijwegt, C M; Meulmeester, R W E; Michailidou, G; Salheb, N; van der Spek, S; Vaissier, N and Verbree, E (2018) Monitoring urban environmental phenomena through a wireless distributed sensor network. Smart and Sustainable Built Environment, 7(1), pp. 68-79. ISSN 2046-6099

Bingley, B; Knight, A and Xing, Y (2025) Church pipe organs: Historical tuning records as indoor environmental evidence. Buildings & Cities, 6(1), pp. 1010-1026. ISSN 2632-6655

Birchmore, R; Davies, K; Etherington, P; Tait, R and Pivac, A (2017) Overheating in Auckland homes: Testing and interventions in full-scale and simulated houses. Building Research & Information, 45(1-2), pp. 157-175. ISSN 0961-3218

Birchmore, R C; Berry, T A; Wallis, S L; Tsai, S and Hernandez, G (2023) Thermal performance and indoor air quality in new, medium density houses: auckland, New Zealand. International Journal of Building Pathology and Adaptation, 41(1), pp. 279-300. ISSN 23984708

Borràs, J G; Mas, Á; Lerma, C; Vercher, J and Gil, E (2024) Separation layers and their influence on green roof water storage. Architectural Engineering and Design Management, 20(6), pp. 1629-1647. ISSN 1745-2007

Chow, D H C (2005) Effects of future climate change and near-extreme weather on office building in the UK. PhD thesis, University of Manchester, UK.

Congress, S S C (2018) Novel infrastructure monitoring using multifaceted unmanned aerial vehicle systems: close range photogrammetry (UAV-CRP) data analysis. PhD thesis, University of Texas at Arlington, USA.

Conradie, D; van Reenen, T and Bole, S (2018) Degree-day building energy reference map for South Africa. Building Research & Information, 46(2), pp. 191-16. ISSN 0961-3218

Davis, M M; Vallejo Espinosa, A L and Ramirez, F R (2019) Beyond green façades: Active air-cooling vertical gardens. Smart and Sustainable Built Environment, 8(3), pp. 243-252. ISSN 2046-6099

Ding, G (2013) Demolish or refurbish: environmental benefits of housing conservation. Construction Economics and Building, 13(2), pp. 18-34. ISSN 2204-9029

Edirisinghe, R and Gunathilake, L (2025) IoT-based smart vest for heat stress management in construction. International Journal of Construction Management, 25(16), pp. 2137-2149. ISSN 1562-3599

El-Dabaa, R and Abdelmohsen, S (2023) Integrating performance indicators in the production rules of shape-shifting grammars for architectural adaptive façade systems. Architectural Engineering and Design Management, 19(4), pp. 419-437. ISSN 1745-2007

Eromobor, S O; Das, D K and Emuze, F (2020) Influence of building and indoor environmental parameters on designing energy-efficient buildings. International Journal of Building Pathology and Adaptation, 39(3), pp. 507-524. ISSN 23984708

Farnham, C; Zhang, L; Yuan, J; Emura, K; Alam, A M and Mizuno, T (2017) Measurement of the evaporative cooling effect: Oscillating misting fan. Building Research & Information, 45(7), pp. 783-799. ISSN 0961-3218

Fernandes, Luciana Oliveira (2015) Procedure for retrofit of the heat power performance of educational buildings by applying passive strategies conditioning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Foulds, C; Powell, J and Seyfan, G (2013) Investigating the performance of everyday domestic practices using building monitoring. Building Research & Information, 41(6), pp. 622-636. ISSN 0961-3218

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Galbraith, G H; McLean, R C; Gillespie, I; Guo, J and Kelly, D (1998) Nonisothermal moisture diffusion in porous building materials. Building Research & Information, 26(6), pp. 330-339. ISSN 0961-3218

Galbraith, G H; McLean, R C and Guo, J S (1998) Moisture permeability data presented as a mathematical relationship. Building Research & Information, 26(3), pp. 157-168. ISSN 0961-3218

Gholami Rostam, Mehdi (2024) Energy efficiency assessment in building designs integrating climate resilience and long-term environmental sustainability. PhD thesis, University of New South Wales, Australia.

Givoni, B; Khedari, J; Wong, N H; Feriadi, H and Noguchi, M (2006) Thermal sensation responses in hot, humid climates: Effects of humidity. Building Research & Information, 34(5), pp. 496-506. ISSN 0961-3218

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Habibi, S (2020) A review of ICT-based applications to monitor environmental parameters. Construction Innovation, 20(1), pp. 112-127. ISSN 1471-4175

Harrington, S and Mulville, M (2025) Defining demand: The suitability of sensor-based demand-controlled ventilation within deep energy retrofit dwellings. Building Research & Information, 53(5), pp. 656-674. ISSN 0961-3218

Henson, L L (1980) Use of the Delphi technique: University community involvement in the creation of a library building program at Florida Institute of Technology. PhD thesis, Florida State University, USA.

Hidalgo-Sánchez, F M; Torres-González, M; Mascort-Albea, E J; Canivell, J; Romero-Hernández, R and Martín-del-Río, J J (2023) NDT spatial data integration for monumental buildings: Technical information management for the royal alcazar of seville. Building Research & Information, 51(6), pp. 625-647. ISSN 0961-3218

Humphreys, M A (2005) Quantifying occupant comfort: Are combined indices of the indoor environment practicable? Building Research & Information, 33(4), pp. 317-325. ISSN 0961-3218

Irizarry, J; Simonsen, K L and Abraham, D M (2005) Effect of safety and environmental variables on task durations in steel erection. Journal of Construction Engineering and Management, 131(12), pp. 1310-1319. ISSN 0733-9364

Jacob, J C; Pandit, D and Sen, J (2025) Developing a validated simulation model of micro-zonal air-conditioning to evaluate thermal comfort parameters. Architectural Engineering and Design Management, 21(2), pp. 289-314. ISSN 1745-2007

Jebelli, H; Choi, B and Lee, S (2019) Application of wearable biosensors to construction sites. II: Assessing workers' physical demand. Journal of Construction Engineering and Management, 145(12): 04019080, ISSN 0733-9364

Ji, X L; Lou, W Z; Dai, Z Z; Wang, B G and Liu, S Y (2006) Predicting thermal comfort in Shanghai's non-air-conditioned buildings. Building Research & Information, 34(5), pp. 507-514. ISSN 0961-3218

Kim, J M; Yum, S G; Adhikari, M D and Bae, J (2024) A LSTM algorithm-driven deep learning approach to estimating repair and maintenance costs of apartment buildings. Engineering, Construction and Architectural Management, 31(13), pp. 369-389. ISSN 0969-9988

Kindangen, J I (1997) Window and roof configurations for comfort ventilation. Building Research & Information, 25(4), pp. 218-225. ISSN 0961-3218

Koehn, E and Brown, G (1985) Climatic effects on construction. Journal of Construction Engineering and Management, 111(2), pp. 129-137. ISSN 0733-9364

Kouhila, M; Bahammou, Y; Lamsyehe, H; Tagnamas, Z; Moussaoui, H; Idlimam, A and Lamharrar, A (2024) Evaluating water sorption isotherms, drying kinetics and exergy performance of traditionally earth mortar drying system based on hybrid solar-electrical dryer. International Journal of Building Pathology and Adaptation, 42(5), pp. 857-880. ISSN 2398-4708

Lee, I; Roppel, P; Lawton, M and Ferreira, P (2019) Design limits for framed wall assemblies dependent on material choices for sheathing membranes and exterior insulation. International Journal of Building Pathology and Adaptation, 37(4), pp. 426-447. ISSN 23984708

Li, Y; Zhang, L; Liu, X and Li, X (2025) A project scheduling optimization model for reducing construction dust emissions based on variability in meteorological conditions. Journal of Construction Engineering and Management, 151(11): 04025171, ISSN 0733-9364

Lihakanga, R (2022) Generic wireless sensor network for dynamic monitoring of a new generation of building material. PhD thesis, Heriot-Watt University, UK.

Liu, X; Song, Y; Yi, W; Wang, X and Zhu, J (2018) Comparing the random forest with the generalized additive model to evaluate the impacts of outdoor ambient environmental factors on scaffolding construction productivity. Journal of Construction Engineering and Management, 144(6): 04018037, ISSN 0733-9364

Lizana, J; Miranda, N D; Gross, L; Mazzone, A; Cohen, F; Palafox-Alcantar, G; Fahr, P; Jani, A; Renaldi, R; McCulloch, M and Khosla, R (2022) Overcoming the incumbency and barriers to sustainable cooling. Buildings & Cities, 3(1), pp. 1075-1097. ISSN 2632-6655

Loyola, M (2019) A method for real-time error detection in low-cost environmental sensors data. Smart and Sustainable Built Environment, 8(4), pp. 338-350. ISSN 2046-6099

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Mastrucci, A and Rao, N D (2019) Bridging India's housing gap: Lowering costs and CO2 emissions. Building Research & Information, 47(1), pp. 8-23. ISSN 0961-3218

Mellado Mascaraque, M Á; Castilla Pacual, F J; Oteiza, I and Aparicio Secanellas, S (2020) Hygrothermal assessment of a traditional earthen wall in a dry mediterranean climate. Building Research & Information, 48(6), pp. 632-644. ISSN 0961-3218

Moselhi, O and Khan, Z (2010) Analysis of labour productivity of formwork operations in building construction. Construction Innovation, 10(3), pp. 286-303. ISSN 1471-4175

Muhammed, A; Folorunso, C O and Fadairo, G (2024) Assessment of sandcrete hollow blocks' thermal performance as a walling material for tropical buildings in Lokoja, Nigeria. International Journal of Building Pathology and Adaptation, 42(4), pp. 653-671. ISSN 23984708

Nardecchia, F; Mattoni, B; Burattini, C and Bisegna, F (2020) The impact of humidity on vortex creation around isolated buildings. Building Research & Information, 48(5), pp. 551-571. ISSN 0961-3218

Neya, I; Yamegueu, D; Messan, A; Coulibaly, Y; Ouedraogo, A L S N and Ayite, Y M X D (2025) Effect of cement and geopolymer stabilization on the thermal comfort: Case study of an earthen building in Burkina Faso. International Journal of Building Pathology and Adaptation, 43(3), pp. 283-301. ISSN 2398-4708

Pogorelskiy, S (2024) BIM-based methods for optimizing the design and maintenance of telecommunications infrastructure in data centres. PhD thesis, Debreceni Egyetem, Hungary.

Prihatmanti, R and Bahauddin, A (2014) Indoor air quality in adaptively reused heritage buildings at a UNESCO world heritage site, Penang, Malaysia. Journal of Construction in Developing Countries, 19(1), pp. 69-91. ISSN 1823-6499

Pryce, M (2006) An exploration of the benefits, drivers and barriers that affect the adoption of green roofs in urban Britain. PhD thesis, University of Salford, UK.

Rasheed, E. O. and Wang, K. (2026) Do overall findings correlate with granular findings? An analysis of factors influencing office workers' thermal comfort and indoor air quality. International Journal of Building Pathology and Adaptation, 44(5), pp. 1211-1231. ISSN 2398-4708

Rodrigo, G A; Perera, B A K S and Ekanayake, B J (2022) Occupant perceptions on the thermal comfort guidelines in air-conditioned offices in Colombo, Sri Lanka. International Journal of Construction Management, 22(4), pp. 579-587. ISSN 1562-3599

Roskams, M J and Haynes, B P (2021) Testing the relationship between objective indoor environment quality and subjective experiences of comfort. Building Research & Information, 49(4), pp. 387-398. ISSN 0961-3218

Rupp, S H and Plagmann, M (2019) Characterisation of air permeability of common ceiling linings and penetrations. International Journal of Building Pathology and Adaptation, 37(4), pp. 448-460. ISSN 23984708

Rönnberg, N; Ringdahl, R and Fredriksson, A (2023) Measurement and sonification of construction site noise and particle pollution data. Smart and Sustainable Built Environment, 12(4), pp. 742-764. ISSN 2046-6099

Santamaria Carrera, J L (2017) Quantifying the effect of construction site factors on concrete quality, costs and production rates. PhD thesis, University of New Mexico, USA.

Sayın, S and Çelebi, G (2020) A practical approach to performance-based building design in architectural project. Building Research & Information, 48(4), pp. 446-468. ISSN 0961-3218

Tao, Y; Song, S; Dong, L; Zhong, F and Zhang, L (2025) Indoor environmental evaluation of traditional Chinese medicine clinic–taking the treatment space as an example. Building Research & Information, 53(4), pp. 492-508. ISSN 0961-3218

Thorpe, D and Karan, E (2008) Method for calculating schedule delay considering weather conditions. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Tonini de Araújo, M; de Souza, H A and Gomes, A P (2022) Computer simulation of moisture transfer in walls: Impacts on the thermal performance of buildings. Architectural Engineering and Design Management, 18(4), pp. 453-472. ISSN 1745-2007

Yuan, W; Yang, R; Yu, J; Zeng, Q and Yao, Z (2023) Control method of spray curing system for cement concrete members based on the adaboost.M1 algorithm. Construction Innovation, 23(1), pp. 178-192. ISSN 1471-4175

Zafar, M. B. and Mehmood, U. (2026) Understanding maintenance cost drivers in higher education: A multi-model econometric study. Built Environment Project and Asset Management, 16(3), pp. 520-541. ISSN 2044-124X

Zanelli, A; Kolo, E; Monticelli, C; Rosina, E; Poli, T; Speroni, A; Mainini, A G and Cadena, J D B (2021) A removable textile hybrid structural screen for the windows of castello sforzesco, milan: When experimental metrics inform the bespoke 'design-to-construction' process in historical contexts. Architectural Engineering and Design Management, 17(3-4), pp. 196-215. ISSN 1745-2007

Zhang, Z; Zhang, Y and Jin, L (2017) Thermal comfort of rural residents in a hot-humid area. Building Research & Information, 45(1-2), pp. 209-221. ISSN 0961-3218

Zhao, S and De Angelis, E (2020) Reducing mould risk during the building design stage: Case studies in South-East China. Journal of Construction in Developing Countries, 25(1), pp. 1-20. ISSN 1823-6499

Zhao, Y; Mantha, B R K; Knijnenburg, B P and Li, D (2025) Exploring the feasibility of mobile robots for post-occupancy evaluations. Building Research & Information, 53(1-2), pp. 165-182. ISSN 0961-3218