Items with Index Term: high temperature

Ahmed, M; Shakaib, M and Siddiqui, M A (2024) Analysis and comparison of flow velocities and in-cylinder temperature distributions to quantify oxides of nitrogen in a compression ignition engine using diesel and biodiesel fuels. Journal of Engineering, Design and Technology, 22(2), pp. 422-437. ISSN 1726-0531

Amankwaa, E F; Roberts, B M; Mensah, P and Gough, K V (2025) Impact of roofing materials on school temperatures in tropical Africa. Buildings & Cities, 6(1), pp. 139-157. ISSN 2632-6655

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Artmann, N; Gyalistras, D; Manz, H and Heiselberg, P (2008) Impact of climate warming on passive night cooling potential. Building Research & Information, 36(2), pp. 111-128. ISSN 0961-3218

Barham, W; Al-Maabreh, A and Latayfeh, O (2023) Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature. International Journal of Building Pathology and Adaptation, 41(5), pp. 1086-1098. ISSN 23984708

Bilhaif, A (1990) The influence of high temperatures on the productivity of construction workers. PhD thesis, University of Reading, UK.

Cho, Y K; Bode, T; Song, J and Jeong, J H (2012) Thermography-driven distress prediction from hot mix asphalt road paving construction. Journal of Construction Engineering and Management, 138(2), pp. 206-214. ISSN 0733-9364

Kliewer, J E (1994) Development of performance based test procedures for asphalt mixtures. PhD thesis, Oregon State University, USA.

Lasebikan, B A; Akisanya, A R and Deans, W F (2015) Autoclave design for high pressure-high temperature corrosion studies. Journal of Engineering, Design and Technology, 13(4), pp. 539-555.

Lomas, K J and Kane, T (2013) Summertime temperatures and thermal comfort in UK homes. Building Research & Information, 41(3), pp. 259-280. ISSN 0961-3218

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Majdalani, J G (2010) Management, operation, and maintenance of wastewater systems. DE thesis, Lamar University - Beaumont, USA.

Muhammed, A; Folorunso, C O and Fadairo, G (2024) Assessment of sandcrete hollow blocks' thermal performance as a walling material for tropical buildings in Lokoja, Nigeria. International Journal of Building Pathology and Adaptation, 42(4), pp. 653-671. ISSN 23984708

Munonye, C (2021) Determining the diurnal variation in comfort temperature in school buildings in the warm and humid climate. International Journal of Building Pathology and Adaptation, 39(5), pp. 766-781. ISSN 23984708

Nilsson, S (2003) Durability of district heating pipes. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Ou, C-S (2007) Sustainable infrastructure materials: A life cycle assessment approach. PhD thesis, University of Colorado at Boulder, USA.

Seichi Marchiori, R (2025) Optimizing heat stress prevention in construction industry through a comprehensive approach integrating sensing devices and training program. PhD thesis, Arizona State University, USA.

Stewart, J; Minchin, R E; Jaselskis, E J; Dayal, V and Smith, G (2004) Potential construction applications for thermoset composite scrap material. Journal of Construction Engineering and Management, 130(2), pp. 199-205. ISSN 0733-9364

Stewart, J H (2024) The plastics crisis: Responsible recycling in civil engineering and infrastructure. PhD thesis, Mississippi State University, USA.

Teli, D; James, P A B and Jentsch, M F (2013) Thermal comfort in naturally ventilated primary school classrooms. Building Research & Information, 41(3), pp. 301-316. ISSN 0961-3218

Wu, G; Zhang, H; Sun, J and Yu, T (2023) Comparative analysis on rheological characteristics of different modified asphalt based on dsr and bbr evaluation. Journal of Engineering, Design and Technology, 21(5), pp. 1568-1587. ISSN 1726-0531

Yadavalli, H V; Krishna Mohan, T V; Rangarajan, S and Albert, S K (2022) Design, fabrication, testing and operation of a simulation facility for high temperature molten salt studies. Journal of Engineering, Design and Technology, 20(6), pp. 1369-1387. ISSN 1726-0531

van Marken Lichtenbelt, W; Hanssen, M; Pallubinsky, H; Kingma, B and Schellen, L (2017) Healthy excursions outside the thermal comfort zone. Building Research & Information, 45(7), pp. 819-827. ISSN 0961-3218