Items with Index Term: flexural strength

Abadou, Y; Ghrieb, A; Bustamante, R and Faid, H (2020) Optimization by mixture design approach: Impact of marble and ceramic recycle on properties of mortar based on air lime. Journal of Engineering, Design and Technology, 18(6), pp. 1731-1747. ISSN 1726-0531

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Aboshia, A M A; Rahmat, R A; Zain, M F M and Ismail, A (2017) Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. International Journal of Building Pathology and Adaptation, 35(5), pp. 438-455.

Ahmed, H I (2023) Mechanical behavior, microstructure, and chloride-penetration resistance of glass waste nanopowder magnetic concrete. Journal of Construction Engineering and Management, 149(1): 04022152, ISSN 0733-9364

Ahmed, H I (2023) Behavior of magnetic self-compacting polypropylene fiber-reinforced concrete. Journal of Construction Engineering and Management, 149(3): 04022179, ISSN 0733-9364

Asa, E; Shrestha, M; Baffoe-Twum, E and Awuku, B (2020) Development of sustainable construction material from fly ash Class C. Journal of Engineering, Design and Technology, 18(6), pp. 1615-1640. ISSN 1726-0531

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Barham, W; Al-Maabreh, A and Latayfeh, O (2023) Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature. International Journal of Building Pathology and Adaptation, 41(5), pp. 1086-1098. ISSN 23984708

Ghanbarpour, S; Mazaheripour, H; Mirmoradi, S H and Barari, A (2010) The effect of type and volume fraction (vf) of steel fiber on the mechanical properties of self-compacting concrete. Journal of Engineering, Design and Technology, 8(3), pp. 247-256. ISSN 1726-0531

Ibrahim, A G; Garba, M M; Okoli, O G; Zubairu, I K; Dahiru, D and Usman, J (2020) Properties of reactive powder concrete produced with unrefined metakaolin and gear inner wire. African Journal of Built Environment Research, 4(1), pp. 81-95. ISSN 2414-0236

Ibrahim, H; Wardeh, G; Fares, H and Ghorbel, E (2025) Mechanical and fracture properties of mortars reinforced with glass fibre and prepared with different cement types. International Journal of Building Pathology and Adaptation, 43(4), pp. 712-731. ISSN 2398-4708

Kashyap, V S; Sancheti, G and Yadav, J S (2023) Mechanical and microstructural behavior of concrete containing marble and nano silica. Journal of Engineering, Design and Technology, 21(5), pp. 1588-1603. ISSN 1726-0531

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Mishra, S K; Upadhyay, B and Das, B B (2026) Exploring the role of metakaolin in binary and ternary blended 3D printable mortars: Deep insights into printability. International Journal of Construction Management, 26(2), pp. 185-203. ISSN 1562-3599

Nath, A D; Hoque, M I; Datta, S D and Shahriar, F (2024) Various recycled steel fiber effect on mechanical properties of recycled aggregate concrete. International Journal of Building Pathology and Adaptation, 42(3), pp. 448-468. ISSN 23984708

Nepal, Jaya (2015) Reliability-based performance assessment and optimum maintenance of corroded reinforced concrete structures. PhD thesis, University of Greenwich, UK.

Nursyamsi, N; Tarigan, J; Aswin, M; Abu Bakar, B H and Hardjasaputra, H (2024) Structural behaviour of the strengthened reinforced concrete beams using ultra high-performance fibre reinforced concrete layer. Construction Innovation, 24(3), pp. 725-746. ISSN 1471-4175

Patil, S V; Balakrishna Rao, K and Nayak, G (2023) Prediction of recycled coarse aggregate concrete mechanical properties using multiple linear regression and artificial neural network. Journal of Engineering, Design and Technology, 21(6), pp. 1690-1709. ISSN 1726-0531

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Ramadan, R; Ghanem, H; Khatib, J M and ElKordi, A M (2025) Effect of plant-based natural fibers on the mechanical properties and volume change of cement paste. International Journal of Building Pathology and Adaptation, 43(4), pp. 693-711. ISSN 2398-4708

Singh, S; Sharma, S K and Akbar, M A (2023) Heat resistance and sorptivity of an air-entrained concrete containing mineral admixtures and CBA. Journal of Engineering, Design and Technology, 21(2), pp. 527-551. ISSN 1726-0531

Suleiman, M Z; Talib, R and Ramli, M (2013) Durability and flexibility characteristics of latex modified ferrocement in structural development applications. Journal of Engineering, Design and Technology, 11(1), pp. 59-70. ISSN 1726-0531

Sullivan, S (2007) Construction and behavior of precast bridge deck panel systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Tantri, A; Nayak, G; Shenoy, A and Shetty, K K (2022) Development of self-compacting concrete using bailey aggregate grading technique in comparison with Indian standard code of practice. Journal of Engineering, Design and Technology, 20(6), pp. 1664-1697. ISSN 1726-0531

Thanaraj, D P; Anand, N and Arulraj, P (2019) Experimental investigation of mechanical properties and physical characteristics of concrete under standard fire exposure. Journal of Engineering, Design and Technology, 17(5), pp. 878-903. ISSN 1726-0531

Velasco-Aquino, A A; Espuna-Mujica, J A; Perez-Sanchez, J F; Zuñiga-Leal, C; Palacio-Perez, A and Suarez-Dominguez, E J (2021) Compressed earth block reinforced with coconut fibers and stabilized with aloe vera and lime. Journal of Engineering, Design and Technology, 19(3), pp. 795-807. ISSN 1726-0531

Wang, L (2018) Deconstructable systems for sustainable design of steel and composite structures. PhD thesis, Northeastern University, USA.