Items with Index Term: finite element analysis

Ali, G M; Olearczyk, J; Bouferguene, A and Al-Hussein, M (2021) Implementation of combined loading to calculate ground bearing pressure under crawler crane tracks. Journal of Construction Engineering and Management, 147(7): 04021051, ISSN 0733-9364

Almasabha, G; Shehadeh, A; Alshboul, O and Al Hattamleh, O (2024) Structural performance of buried reinforced concrete pipelines under deep embankment soil. Construction Innovation, 24(5), pp. 1280-1296. ISSN 1471-4175

Bai, L (2013) RFID sensor-driven structural condition monitoring in integrated building information modeling environment. PhD thesis, University of Maryland, College Park, USA.

Barour, S and Zergua, A (2021) Numerical analysis of reinforced concrete beams strengthened in shear using carbon fiber reinforced polymer materials. Journal of Engineering, Design and Technology, 19(2), pp. 339-357. ISSN 1726-0531

Belabed, Y; Kerboua, B and Tarfaoui, M (2019) New design for reducing interfacial stresses of reinforced structures with FRP plates. International Journal of Building Pathology and Adaptation, 37(2), pp. 196-207. ISSN 23984708

Bhaurkar, V P and Thakur, A G (2019) Investigation of crack in beams using anti-resonance technique and FEA approach. Journal of Engineering, Design and Technology, 17(6), pp. 1266-1284. ISSN 1726-0531

Bofang, Z and Jianbo, C (1989) Finite element analysis of effect of pipe cooling in concrete dams. Journal of Construction Engineering and Management, 115(4), pp. 487-498. ISSN 0733-9364

Chen, S and Jiang, Y (2008) Pavement reflective cracking control with coarse-aggregate asphalt mix interlayer. International Journal of Construction Education and Research, 4(3), pp. 200-209. ISSN 1557-8771

Chowdhury, A A (1994) An object-oriented finite element formulation for construction simulation. PhD thesis, Lehigh University, USA.

Das, P P; Khatri, V N; Doley, R; Dutta, R K and Yadav, J S (2024) Estimation of bearing capacity of shallow footings on layered sand using finite elements analysis. Journal of Engineering, Design and Technology, 22(2), pp. 385-403. ISSN 1726-0531

Ezzeldine, O Y (1995) Design of tunnels constructed using pressurized shield methods. PhD thesis, University of Alberta, Canada.

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Fiorineschi, L; Papini, S; Pugi, L; Rindi, A and Rotini, F (2020) Systematic design of a new gearbox for concrete mixers. Journal of Engineering, Design and Technology, 18(6), pp. 2017-2042. ISSN 1726-0531

Harryson, P (2008) Industrial bridge engineering: structural developments for more efficient bridge construction. PhD thesis, Chalmers University of Technology, Sweden.

Hasheminasab, S and Kashi, E (2021) Finite element analysis of ports pavement under container loading. Journal of Engineering, Design and Technology, 19(2), pp. 497-508. ISSN 1726-0531

Hunt, B J P (1980) Development of a research program for scaffolding standards. DEng thesis, University of Kansas, USA.

Jayaram, S (2010) Design of template to fabricate magnetic torquer coils for nano and picosatellite missions. Journal of Engineering, Design and Technology, 8(2), pp. 158-167. ISSN 1726-0531

John Samuel, I (2023) A human-centered infrastructure asset management framework using BIM and augmented reality. PhD thesis, George Mason University, USA.

Kahoul, H; Belhour, S; Bellaouar, A and Dron, J P (2019) Fatigue life prediction of upper arm suspension using strain life approach. Journal of Engineering, Design and Technology, 17(1), pp. 25-40. ISSN 1726-0531

Karamoozian, M. and Zhang, H. (2026) Pushing the boundaries of prefabricated shell building design with building information modeling (BIM) and ultra-high performance concrete (uhpc). Engineering, Construction and Architectural Management, 33(3), pp. 2564-2585. ISSN 0969-9988

Kere, K J (2023) Probabilistic model development and risk management strategies for pipelines with anomalies. PhD thesis, Marquette University, USA.

Khan, M R and Sonawane, A (2020) Prediction of impact response in construction safety helmet using FEA. Journal of Engineering, Design and Technology, 18(3), pp. 557-566. ISSN 1726-0531

Kulkarni, S; Edwards, D J; Chapman, C; Hosseini, M R and Owusu-Manu, D G (2019) A preliminary mechanical design evaluation of the Wikispeed car: For light-weighting implications. Journal of Engineering, Design and Technology, 17(1), pp. 230-249. ISSN 1726-0531

Lewis, N S (2023) Development of an open-source methodology for simulation of civil engineering structures subject to multi-hazards. PhD thesis, University of Washington, USA.

Li, M (2024) Dfma-oriented rebar design optimization for reinforced concrete structures using graph neural network. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Lin, Solomon Tung Kit (2021) Brim-based structural life cycle assessment of bridges: Incorporating finite element analysis and real-time sensor measurements. PhD thesis, Monash University, Australia.

Malekzadeh, H; Edwards, D J and Harris, F C (2005) Simulating the ground freezing process: a decision support model. Journal of Construction Research, 6(1), pp. 107-121. ISSN 1609-9451

Meng, Y (2023) Multi-objective optimal design and assessment framework of freeform timber structure oriented by robotic automation construction. PhD thesis, University of Sheffield, UK.

Pickhaver, J A (2006) Numerical modelling of building response to tunnelling. PhD thesis, University of Oxford, UK.

Ponnada, M R and Geddada, Y (2023) Nonlinear modelling and finite element analysis on the load-bearing capacity of RC beams with considering the bond–slip effect. Journal of Engineering, Design and Technology, 21(4), pp. 945-972. ISSN 1726-0531

Sedaghati, R (2000) Investigations in structural optimization of nonlinear problems using the finite element method. PhD thesis, University of Victoria, Canada.

Shafabakhsh, G; Kashi, E and Tahani, M (2018) Analysis of runway pavement response under aircraft moving load by FEM. Journal of Engineering, Design and Technology, 16(2), pp. 233-243. ISSN 1726-0531

Singh, S; Kulkarni, K; Pandey, R and Singh, H (2012) Buckling analysis of thin rectangular plates with cutouts subjected to partial edge compression using FEM. Journal of Engineering, Design and Technology, 10(1), pp. 128-142. ISSN 1726-0531

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Van de Ruitenbeek, H K M (2012) Evolutionary, unconscious design support for the architectural, engineering and construction industry. PhD thesis, Delft University of Technology, Netherlands.

Vinodh, S and Ravikumar, R (2012) Application of probabilistic finite element analysis for crane hook design. Journal of Engineering, Design and Technology, 10(2), pp. 255-275. ISSN 1726-0531

Wang, L (2018) Deconstructable systems for sustainable design of steel and composite structures. PhD thesis, Northeastern University, USA.

Wang, Z (2020) Building internal heat dissipation of special shaped columns composed of concrete-filled square steel tubes based on thermal bridge models. International Journal of Building Pathology and Adaptation, 38(3), pp. 441-449. ISSN 23984708

Zaryoun, M; Hosseini, M and Soleymani, K (2022) Sustainable architecture and earthquake resilience of vernacular zegalli houses in Northern Iran. Engineering, Construction and Architectural Management, 29(2), pp. 1061-1085. ISSN 0969-9988

Zhang, X; Zhang, Z; Sun, W; Hu, J; Zhang, L and Zhu, W (2025) The mechanical deformation characteristics of the internal structure of large diameter shield tunnel in different construction stages. Engineering, Construction and Architectural Management, 32(4), pp. 2190-2209. ISSN 0969-9988