Items with Index Term: fatigue

Abdelhamid, T S (1999) Measuring and evaluating physiological demands of construction work. PhD thesis, University of Michigan, USA.

Abdelhamid, T S and Everett, J G (1999) Physiological demands of concrete slab placing and finishing work. Journal of Construction Engineering and Management, 125(1), pp. 47-52. ISSN 0733-9364

Abdelmageed, S; Abdelkhalek, S I F M; Hussien, M and Zayed, T (2024) A hybrid simulation model for modules installation in modular integrated construction projects. International Journal of Construction Management, 24(13), pp. 1407-1418. ISSN 1562-3599

Abuwarda, Z; Mostafa, K; Morita, P and Hegazy, T (2024) Optimizing construction work-rest schedules and worker reassignment utilizing wristband physiological data. Journal of Construction Engineering and Management, 150(11): 04024149, ISSN 0733-9364

Agyekum, A K; Fugar, F D K; Agyekum, K; Akomea-Frimpong, I and Pittri, H (2023) Barriers to stakeholder engagement in sustainable procurement of public works. Engineering, Construction and Architectural Management, 30(9), pp. 3840-3857. ISSN 0969-9988

Ahn, C R; Lee, S; Sun, C; Jebelli, H; Yang, K and Choi, B (2019) Wearable sensing technology applications in construction safety and health. Journal of Construction Engineering and Management, 145(11): 03119007, ISSN 0733-9364

Al-Khiami, M. I. and Lindhard, Sø M. (2026) On-site evaluation of back-support exoskeleton effectiveness in construction: A multiple case study of physical performance, ergonomic comfort, and user acceptance among masonry workers. Journal of Construction Engineering and Management, 152(10): 04026167, ISSN 0733-9364

Antwi-Afari, M F; Li, H; Edwards, D J; Pärn, E A; Owusu-Manu, D G; Seo, J and Wong, A Y L (2018) Identification of potential biomechanical risk factors for low back disorders during repetitive rebar lifting. Construction Innovation, 18(2), pp. 206-226. ISSN 1471-4175

Antwi-Afari, M F; Li, H; Edwards, D J; Pärn, E A; Seo, J and Wong, A (2017) Effects of different weights and lifting postures on balance control following repetitive lifting tasks in construction workers. International Journal of Building Pathology and Adaptation, 35(3), pp. 247-263.

Anwer, S; Li, H; Antwi-Afari, M F; Mirza, A M; Rahman, M A; Mehmood, I; Guo, R and Wong, A Y L (2024) Evaluation of data processing and artifact removal approaches used for physiological signals captured using wearable sensing devices during construction tasks. Journal of Construction Engineering and Management, 150(1): 03123008, ISSN 0733-9364

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W; Mehmood, I and Wong, A Y L (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29(9), pp. 3415-3438. ISSN 0969-9988

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W and Wong, A Y L (2021) Evaluation of physiological metrics as real-time measurement of physical fatigue in construction workers: State-of-the-art review. Journal of Construction Engineering and Management, 147(5): 03121001, ISSN 0733-9364

Anwer, S; Li, H; Umer, W; Antwi-Afari, M F; Mehmood, I; Yu, Y; Haas, C and Wong, A Y L (2023) Identification and classification of physical fatigue in construction workers using linear and nonlinear heart rate variability measurements. Journal of Construction Engineering and Management, 149(7): 04023057, ISSN 0733-9364

Azila-Gbettor, E M; Novieto, D T; Tulasi, E E; Ahiabu, M K and Adzivor, E K (2024) Citizenship fatigue and employee commitment: Moderating role of psychological ownership among artisans of family-owned construction firms. International Journal of Construction Management, 24(9), pp. 975-985. ISSN 1562-3599

Bae, Juhyeon (2024) Integrating wearable biosensing with social norm to empower construction workers for preventive job site safety. PhD thesis, University of Michigan, USA.

Bangaru, S S (2021) Fatigue monitoring through wearable sensors for construction workers. PhD thesis, Louisiana State University and Agricultural & Mechanical College, USA.

Bhat, A; Gupta, V; Aulakh, S S and Elsen, R S (2023) Generative design and analysis of a double-wishbone suspension assembly: A methodology for developing constraint oriented solutions for optimum material distribution. Journal of Engineering, Design and Technology, 21(3), pp. 927-942. ISSN 1726-0531

Bowen, P; Peihua Zhang, R and Edwards, P (2021) An investigation of work-related strain effects and coping mechanisms among South African construction professionals. Construction Management and Economics, 39(4), pp. 298-322. ISSN 01446193

Bugg, R; Collins, W and Gilbert, C (2018) Applying radio frequency identification tags to improve personnel safety in dredging construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

C.R, A; Murali, S; Haq, M A; Bysani, T N and Narahari, N S (2023) Exoskeleton for lower extremities based on Indian anthropomorphism with gait allowance: Design and development. Journal of Engineering, Design and Technology, 21(5), pp. 1343-1372. ISSN 1726-0531

Cao, X.; Hong, C.; Xu, Y.; Lee, C. Y. and Skitmore, M. (2026) Effects of abusive supervision on construction industry workers' work efficiency: A study based on EEG. Journal of Construction Engineering and Management, 152(6): 04026073, ISSN 0733-9364

Chan, M (2011) Fatigue: The most critical accident risk in oil and gas construction. Construction Management and Economics, 29(4), pp. 341-353. ISSN 1466433X

Chen, S.; Guan, Z.; Zhang, Z.; Guo, H. and Han, Y. (2026) Impact of construction workers' physical fatigue on unsafe behavior: An ecg-based field experiment study. Journal of Construction Engineering and Management, 152(8): 04026128, ISSN 0733-9364

Chen, Xinyu (2025) Multimodal data fusion-based ergonomic assessment method for construction workers. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y.; Vu, Q. T. and Yang, L. K. (2026) Multidimensional fall risk assessment for the real-time monitoring of construction site worker safety. International Journal of Construction Management, 26(7), pp. 1191-1221. ISSN 1562-3599

De Jarnette, V; McCarthy, L M; Bennert, T and Guercio, M C (2013) Use of mechanistic-empirical pavement design principles to assign asphalt pavement pay factor adjustments. Journal of Construction Engineering and Management, 139(11): 4013024, ISSN 0733-9364

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Dias Barkokebas, R and Li, X (2023) VR-ret: A virtual reality-based approach for real-time ergonomics training on industrialized construction tasks. Journal of Construction Engineering and Management, 149(10): 04023098, ISSN 0733-9364

Emuze, F (2017) The human contribution to unsafe construction acts and conditions in the central region of South Africa. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Emuze, F (2020) Factors causing fatigue and safety-related errors on construction sites in bloemfontein. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Fang, X; Li, H; Ma, J; Xing, X; Ren, Q; Umer, W and Wang, L (2024) Online assessment of spontaneous mental fatigue in construction workers considering data quality: Improved online sequential extreme learning machine. Journal of Construction Engineering and Management, 150(11): 04024148, ISSN 0733-9364

Fini, A A F; Akbarnezhad, A; Rashidi, T H and Travis Waller, S (2017) Job assignment based on brain demands and human resource strategies. Journal of Construction Engineering and Management, 143(5): 04016123, ISSN 0733-9364

Foster, P; Abdelal, G; Lim, J B P; Hajsadeghi, M and McCrum, D (2016) Finite element modelling of cyclic behaviour of cold-formed steel bolted moment-resisting connections. Journal of Construction in Developing Countries, 21(1), pp. 167-180. ISSN 1823-6499

Gould, C H (1988) Rolling fours: Novel work schedule. Journal of Construction Engineering and Management, 114(4), pp. 577-593. ISSN 0733-9364

He, S; Li, J; Li, M and Antwi-Afari, M F (2026) Modeling and analyzing workers' hazard perception in construction equipment operations: A hierarchical Bayesian cognitive modeling approach integrating multisource data. Journal of Construction Engineering and Management, 152(5): 04026054, ISSN 0733-9364

He, W (1997) Pavement project optimization and analysis. PhD thesis, Arizona State University, USA.

Hovde, G O (1995) Fatigue and overload reliability of offshore structural systems, considering the effect of inspection and repair. DrIng thesis, Universitetet i Trondheim Norges Tekniske Hogskole, Norway.

Hulio, Z H and Jiang, W (2020) An assessment of effects of non-stationary operational conditions on wind turbine under different wind scenario. Journal of Engineering, Design and Technology, 18(1), pp. 102-121. ISSN 1726-0531

Ibrahim, Abdullahi Alabi (2024) Construction workers' situational awareness: Investigating the role of physical fatigue, workplace dynamism, and emerging technologies. PhD thesis, Texas A&M University, USA.

Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks. PhD thesis, University of Alberta, Canada.

Isied, M M (2023) Critical assessment of asphalt mixture design procedures and asphalt mixture classification systems. PhD thesis, North Carolina State University, USA.

Jarkas, A M; Al Balushi, R A and Raveendranath, P K (2015) Determinants of construction labour productivity in Oman. International Journal of Construction Management, 15(4), pp. 332-344. ISSN 1562-3599

Jia, A Y; Rowlinson, S; Loosemore, M; Xu, M; Li, B and Gibb, A (2017) Institutions and institutional logics in construction safety management: The case of climatic heat stress. Construction Management and Economics, 35(6), pp. 338-367. ISSN 01446193

Jiang, Z; Han, Y; Cheng, Y; Wang, Z and Meng, H (2025) An improved yolov8-dyhead-wiseiou model for positioning and counting detection of grouting sleeves in a prefabricated wall. Journal of Construction Engineering and Management, 151(4): 04025016, ISSN 0733-9364

Jirsaraei, M. J.; Lee, S.; DeStefano, S.; Gerber, L. H.; Ji, W. and Sikdar, S. (2026) Multidomain analysis of chronic pain intensity in labor-intensive occupations: Insights from network and regression modeling. Journal of Construction Engineering and Management, 152(8): 04026110, ISSN 0733-9364

Joseph, A and Hamilton, D K (2008) The Pebble Projects: Coordinated evidence-based case studies. Building Research & Information, 36(2), pp. 129-145. ISSN 0961-3218

Kahoul, H; Belhour, S; Bellaouar, A and Dron, J P (2019) Fatigue life prediction of upper arm suspension using strain life approach. Journal of Engineering, Design and Technology, 17(1), pp. 25-40. ISSN 1726-0531

Kazar, G and Comu, S (2022) Exploring the relations between the physiological factors and the likelihood of accidents on construction sites. Engineering, Construction and Architectural Management, 29(1), pp. 456-475. ISSN 0969-9988

Kedarisetty, S (2025) Pavement management systems in local governments. PhD thesis, University of California, Davis, USA.

Kulkarni, V S and Devalkar, R V (2019) Postural analysis of building construction workers using ergonomics. International Journal of Construction Management, 19(6), pp. 464-471. ISSN 1562-3599

Lataniotis, C (2019) Data-driven uncertainty quantification for high-dimensional engineering problems. DSc thesis, ETH Zürich, Switzerland.

Lee, G and Lee, S (2022) Importance of testing with independent subjects and contexts for machine-learning models to monitor construction workers' psychophysiological responses. Journal of Construction Engineering and Management, 148(9): 04022082, ISSN 0733-9364

Lee, W; Lin, K Y; Johnson, P W and Seto, E Y W (2022) Selection of wearable sensor measurements for monitoring and managing entry-level construction worker fatigue: A logistic regression approach. Engineering, Construction and Architectural Management, 29(8), pp. 2905-2923. ISSN 0969-9988

Li, J.; Ouyang, Y.; Dai, Q. and Luo, X. (2026) Impact of age on cognitive states influencing falling from heights in high-altitude construction: Evidence from a virtual reality and electroencephalogram study. Journal of Construction Engineering and Management, 152(7): 04026101, ISSN 0733-9364

Li, J; Zhu, J and Guan, C (2024) Mitigating fatigue in tunnel construction through illumination: Evidence from virtual reality. Journal of Construction Engineering and Management, 150(11): 04024165, ISSN 0733-9364

Liu, Y (2023) Worker-centric human-robot co-adaptation in construction. PhD thesis, Pennsylvania State University, USA.

Liu, Y; Xiang, Q; Goh, Y M; Ye, G; Shao, Z and Safiena, S (2025) Exploring the mechanism of hazard detection failure of construction workers from a capability-demand matching perspective. Journal of Construction Engineering and Management, 151(9): 04025115, ISSN 0733-9364

Ma, J; Li, H; Yu, X; Fang, X; Fang, B; Zhao, Z; Huang, X; Anwer, S and Xing, X (2023) Sweat analysis-based fatigue monitoring during construction rebar bending tasks. Journal of Construction Engineering and Management, 149(9): 04023072, ISSN 0733-9364

Mahmoud, H M (1998) Applying a fuzzy logic expert system in the selection of bridge deck joints. PhD thesis, University of Central Florida, USA.

Martin, H; Manohar, R; Ellis, L; Chadee, A and Leon, L (2025) Emotional and cognitive landscape of perceived risk: Anxiety, caution, and financial loss in shaping safety decisions using partial least squares structural equation modeling. Journal of Construction Engineering and Management, 151(11): 04025175, ISSN 0733-9364

Mohamed, M A; Hamzah, M J A; Pauzi, N N; Shahrudin, N S N and Sheffie, S I M (2023) The effect of COVID-19 on construction site personnel: Psychological and physiological perspectives. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Moohialdin, A S M; Lamari, F; Miska, M and Trigunarsyah, B (2023) Proximity activity intensity identification system in hot and humid weather conditions: Development and implementation. Journal of Construction Engineering and Management, 149(12): 04023122, ISSN 0733-9364

Mostafavi, A; Valentin, V; Abraham, D M and Louis, J (2012) Assessment of the productivity of nighttime asphalt paving operations. Journal of Construction Engineering and Management, 138(12), pp. 1421-1432. ISSN 0733-9364

Namian, M; Taherpour, F; Ghiasvand, E and Turkan, Y (2021) Insidious safety threat of fatigue: Investigating construction workers' risk of accident due to fatigue. Journal of Construction Engineering and Management, 147(12): 2180, ISSN 0733-9364

Nasirzadeh, F; Rostamnezhad, M; Carmichael, D G; Khosravi, A and Aisbett, B (2022) Labour productivity in Australian building construction projects: A roadmap for improvement. International Journal of Construction Management, 22(11), pp. 2079-2088. ISSN 1562-3599

Nguyen, F B T (2024) Quality control of front-end planning for electric power construction: A collaborative process-based approach using systems engineering. PhD thesis, Colorado State University, USA.

Nkeleme, E I; Mbamali, I and Shakantu, W (2022) A measure of combustion-generated pollutants in university laboratories and their effects on the indoor air quality. Journal of Construction Business and Management, 5(2), pp. 44-53. ISSN 2521-0165

Nunes, M C M (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham, UK.

Ouyang, Y and Luo, X (2024) Effects of physical fatigue on construction workers' visual search patterns during hazard identification. Journal of Construction Engineering and Management, 150(9): 04024120, ISSN 0733-9364

O’Riain, E; Spillane, J and Sherratt, F (2018) Healthy, happy workers? The consequences of commuting between Northern Ireland and Great Britain. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Parchami Jalal, M and Shoar, S (2019) A hybrid framework to model factors affecting construction labour productivity: Case study of Iran. Journal of Financial Management of Property and Construction, 24(3), pp. 630-654. ISSN 1366-4387

Patel, A J (1996) Development of fatigue based pay adjustment factors in performance-related specifications for full-depth asphalt concrete pavements. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Powell, A; Galea, N; Salignac, F; Loosemore, M and Chappell, L (2018) Masculinity and workplace wellbeing in the Australian construction industry. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Powell, R (2012) Evaluating cognitive screening as a possible solution to reducing accidents and improving workplace productivity through early preventive detection of fatigue-impairment in the construction industry. PhD thesis, University of Bath, UK.

Powell, R and Copping, A (2010) Construction worker sleep deprivation and its effects on personal safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Powell, R and Copping, A (2010) Sleep deprivation and its consequences in construction workers. Journal of Construction Engineering and Management, 136(10), pp. 1086-1092. ISSN 0733-9364

Powell, R I and Copping, A G (2016) Measuring fatigue-related impairment in the workplace. Journal of Engineering, Design and Technology, 14(3), pp. 507-525.

Sakib, M N; Chaspari, T and Behzadan, A H (2022) A feedforward neural network for drone accident prediction from physiological signals. Smart and Sustainable Built Environment, 11(4), pp. 1017-1041. ISSN 2046-6099

Scales, Jeffrey G (2021) Including generative mechanisms in project scheduling using hybrid simulation. PhD thesis, University of Technology Sydney, Australia.

Seichi Marchiori, R (2025) Optimizing heat stress prevention in construction industry through a comprehensive approach integrating sensing devices and training program. PhD thesis, Arizona State University, USA.

Seo, J; Lee, S and Seo, J (2016) Simulation-based assessment of workers' muscle fatigue and its impact on construction operations. Journal of Construction Engineering and Management, 142(11): 04016063, ISSN 0733-9364

Sirin, O; Gunduz, M and Shamiyeh, M E (2021) Application of analytic hierarchy process (AHP) for sustainable pavement performance management in qatar. Engineering, Construction and Architectural Management, 28(10), pp. 3106-3122. ISSN 0969-9988

Smallwood, J J; Allen, C J and Deacon, C H (2020) The role of industry 4.0 in construction occupational health (OH). In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

So, K L (2021) Integrated life-cycle management of highway bridges. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Soliman, M (2015) Life-cycle management of civil and marine structures under fatigue and corrosion effects. PhD thesis, Lehigh University, USA.

Stubbs, D A (1975) Trunk stresses in construction workers. PhD thesis, University of Surrey, UK.

Sullivan, S (2007) Construction and behavior of precast bridge deck panel systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Taemthong, W (2002) Accounting for the impact of learning and scheduled overtime: Developing dynamic models to estimate and control labor time and labor cost. PhD thesis, University of Michigan, USA.

Tao, Y; Hu, H; Xu, F and Zhang, Z (2024) Work-rest schedule optimization of precast production considering workers' overexertion. Journal of Construction Engineering and Management, 150(5): 04024033, ISSN 0733-9364

Techera, U; Hallowell, M and Littlejohn, R (2019) Worker fatigue in electrical-transmission and distribution-line construction. Journal of Construction Engineering and Management, 145(1): 04018119, ISSN 0733-9364

Techera, U; Hallowell, M; Littlejohn, R and Rajendran, S (2018) Measuring and predicting fatigue in construction: Empirical field study. Journal of Construction Engineering and Management, 144(8): 04018062, ISSN 0733-9364

Techera, U D (2017) Measuring and managing construction worker fatigue. PhD thesis, University of Colorado at Boulder, USA.

Tehrani, B M; Wang, J and Truax, D (2022) Assessment of mental fatigue using electroencephalography (EEG) and virtual reality (VR) for construction fall hazard prevention. Engineering, Construction and Architectural Management, 29(9), pp. 3593-3616. ISSN 0969-9988

Torres Calderon, W (2022) Video representation learning for vision-driven activity analysis in construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2017) Low-cost ergonomic intervention for mitigating physical and subjective discomfort during manual rebar tying. Journal of Construction Engineering and Management, 143(10): 04017075, ISSN 0733-9364

Umer, W; Yu, Y and Antwi Afari, M F (2022) Quantifying the effect of mental stress on physical stress for construction tasks. Journal of Construction Engineering and Management, 148(3): 04021204, ISSN 0733-9364

Wang, J; Li, H; Han, S; Wang, G and Ren, W (2025) Contactless vital-sign monitoring of construction machinery operators using millimeter-wave technology. Journal of Construction Engineering and Management, 151(1): 04024182, ISSN 0733-9364

Yuan, L (2006) Biomechanical analysis of the physical loads on the low back and shoulder during drywall installation. ScD thesis, University of Massachusetts Lowell, USA.

Yue, H; Ye, G; Liu, Q; Yang, X; Xiang, Q and Luo, Y (2024) Impact of cognitive fatigue on attention and the implications for construction safety: A neuroscientific perspective. Journal of Construction Engineering and Management, 150(8): 04024102, ISSN 0733-9364

Zhang, J and Jiang, S (2026) Unsafe behaviors in workers at heights: A spacetime-based coupling analysis method and its safety implications. Journal of Construction Engineering and Management, 152(1): 04025233, ISSN 0733-9364

Zhang, H and Lin, Y (2023) Prediction of ergonomic risks and impacts on construction schedule through agent-based simulation. Journal of Construction Engineering and Management, 149(3): 04022181, ISSN 0733-9364

Zhang, R P; Bowen, P and Edwards, P (2020) Work-related strain effects and coping strategies among South African construction professionals. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Zhou, H; Chan, A P C; Yang, Y and Yi, W (2025) A systematic review of mental states and safety performance of construction workers. Journal of Construction Engineering and Management, 151(10): 03125007, ISSN 0733-9364