Items with Index Term: falls

Abotaleb, I S and El-Adaway, I H (2018) First attempt toward a holistic understanding of the interdependent rippled impacts associated with out-of-sequence work in construction projects: System dynamics modeling approach. Journal of Construction Engineering and Management, 144(9): 04018084, ISSN 0733-9364

Acar, E; Wall, J; McNamee, F; Carney, M and Öney-Yazici, E (2008) Innovative safety management training through e-learning. Architectural Engineering and Design Management, 4(3-4), pp. 239-250. ISSN 1745-2007

Afuye, O O; Oladimeji, O; Aina, O O; Tam, V W Y and Haddad, A N (2025) Factors influencing safety behaviours of construction tradesmen. International Journal of Construction Management, 25(4), pp. 375-384. ISSN 1562-3599

Ahn, C R; Lee, S; Sun, C; Jebelli, H; Yang, K and Choi, B (2019) Wearable sensing technology applications in construction safety and health. Journal of Construction Engineering and Management, 145(11): 03119007, ISSN 0733-9364

Al-Ameen, H A (2012) Antitrust: the person-centred approach. PhD thesis, Swansea University, UK.

Antwi-Afari, M F; Li, H; Edwards, D J; Pärn, E A; Seo, J and Wong, A (2017) Effects of different weights and lifting postures on balance control following repetitive lifting tasks in construction workers. International Journal of Building Pathology and Adaptation, 35(3), pp. 247-263.

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W; Mehmood, I and Wong, A Y L (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29(9), pp. 3415-3438. ISSN 0969-9988

Arewa, A O (2014) An empirical analysis of commitment to health and safety and its effect on the profitability of UK Construction SMEs. PhD thesis, University of Bolton, UK.

Arijeloye, B T; Aje, I O and Oke, A E (2024) Evaluating the key risk factors in PPP-procured mass housing projects in Nigeria: A Delphi study of industry experts. Journal of Engineering, Design and Technology, 22(1), pp. 60-76. ISSN 1726-0531

Aroke, O M (2022) Measuring attention, working memory and visual perception to reduce the risk of injuries in the construction industry. PhD thesis, George Mason University, USA.

Bai, Y; Burkett, W R and Nash, P T (2006) Lessons learned from an emergency bridge replacement project. Journal of Construction Engineering and Management, 132(4), pp. 338-344. ISSN 0733-9364

Balamurali Kanagaraj; Tattukolla Kiran; Anand N; Khalifa Al Jabri and Justin S (2023) Development and strength assessment of eco-friendly geopolymer concrete made with natural and recycled aggregates. Construction Innovation, 23(3), pp. 524-545. ISSN 1471-4175

Baldursdottir, N and Ottosson, E (2012) Managing change through participation: Developing shared construction guidelines in 26 public organisations. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bannholzer, Dominic (2020) Leerstellenmanagement in der planung und steuerung des change-managements von bautechnologieunternehmen: Eine generelle explikation, wie die autopoietische fähigkeit von unternehmen durch lücken im veränderungsprozess positiv potenziert werden kann. PhD thesis, Middlesex University, UK.

Bascoul, A M (2017) Managing project structural complexity by integrating facility management in planning, designing, and execution of high-end facility upgrades. PhD thesis, University of California, Berkeley, USA.

Beavers, J E; Moore, J R and Schriver, W R (2009) Steel erection fatalities in the construction industry. Journal of Construction Engineering and Management, 135(3), pp. 227-234. ISSN 0733-9364

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Bobick, T G (2004) Falls through roof and floor openings and surfaces, including skylights: 1992-2000. Journal of Construction Engineering and Management, 130(6), pp. 895-907. ISSN 0733-9364

Borgeson, S and Brager, G (2011) Comfort standards and variations in exceedance for mixed-mode buildings. Building Research & Information, 39(2), pp. 118-133. ISSN 0961-3218

Branche, C M (1988) An assessment of conditional risks for severe occupational traumatic injury during falls from elevations at work among North Carolina construction workers. PhD thesis, University of North Carolina at Chapel Hill, USA.

Bugg, R; Collins, W and Gilbert, C (2018) Applying radio frequency identification tags to improve personnel safety in dredging construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Cakan, H; Kazan, E and Usmen, M (2014) Investigation of factors contributing to fatal and non-fatal roofer fall accidents. International Journal of Construction Education and Research, 10(4), pp. 300-317. ISSN 1557-8771

Carney, M; Wall, J; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E and Önwy-Yazici, E (2008) Challenges to delivering safety training through virtual classes. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Chang, Y P (2020) Construction worker safety and accident prevention in Taiwan. PhD thesis, University of Bristol, UK.

Chellappa, V and Salve, U R (2025) Exploring causes of falls and preventive measures in vertical formwork operations in Indian construction. Built Environment Project and Asset Management, 15(6), pp. 1089-1105. ISSN 2044-124X

Chen, S; Zeng, N; Li, F; Yue, H; Wang, Q and Li, Q (2025) Proactive safety risk control system for deep foundation pit construction: Situational tailoring of integrated cybernetics and dual-system theory. Journal of Construction Engineering and Management, 151(4): 04025018, ISSN 0733-9364

Chen, T Y-J (2019) Advancing quantitative risk analysis for critical water infrastructure. PhD thesis, University of Michigan, USA.

Chen, Z; Chen, K and Cheng, J C P (2023) ISM-based analysis of VR-AEC adoption barriers and their inner mechanisms. Engineering, Construction and Architectural Management, 30(9), pp. 4271-4293. ISSN 0969-9988

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y. and Vu, Q. T. (2026) Bidirectional revolving gate Fourier transform: A newly spectrum deep machine learning for enhancing construction worker safety classification. Engineering, Construction and Architectural Management, pp. 1-28. ISSN 0969-9988

Cheng, M. Y.; Vu, Q. T. and Yang, L. K. (2026) Multidimensional fall risk assessment for the real-time monitoring of construction site worker safety. International Journal of Construction Management, 26(7), pp. 1191-1221. ISSN 1562-3599

Choi, S D (2008) Postural balance and adaptations in transitioning sloped surfaces. International Journal of Construction Education and Research, 4(3), pp. 189-199. ISSN 1557-8771

Clawson, Bobie Sue Anna (2024) The influence of walking surface types on gait parameters, kinematics and worker perceptions in relation to slips, trips, and fall incidents in the construction industry. PhD thesis, Indiana University of Pennsylvania, USA.

Darragh, A J R (2001) Patterns of injury among residential construction workers before and after a safety intervention program, 1994-1998. PhD thesis, Colorado State University, USA.

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Donato, Matteo (2016) The influence of resource dependency on collaboration in the construction supply chain. PhD thesis, Victoria University, Australia.

Du Toit, G J (1997) The potential of labour-intensive construction methods in the provision of urban infrastructure. PhD thesis, University of Pretoria, South Africa.

Elbashbishy, T S; Ali, G G and El-adaway, I H (2022) Blockchain technology in the construction industry: Mapping current research trends using social network analysis and clustering. Construction Management and Economics, 40(5), pp. 406-427. ISSN 01446193

Emuze, F (2017) The human contribution to unsafe construction acts and conditions in the central region of South Africa. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Fredericks, T K; Abudayyeh, O; Choi, S D; Wiersma, M and Charles, M (2005) Occupational injuries and fatalities in the roofing contracting industry. Journal of Construction Engineering and Management, 131(11), pp. 1233-1240. ISSN 0733-9364

Fullen, M D (2009) The development, diffusion and evaluation of a fall hazard safety training program for residential construction workers utilizing instructor led and new media delivery. EdD thesis, West Virginia University, USA.

Gillen, M E (1996) Nonfatal falls in construction workers: Predictors of injury severity. PhD thesis, University of California, San Francisco, USA.

Goh, Y M and Wang, Q (2015) Investigating the adequacy of horizontal lifeline system design through case studies from Singapore. Journal of Construction Engineering and Management, 141(7): 4015017, ISSN 0733-9364

Grosskopf, K R (2010) Post-disaster recovery and reconstruction safety training. International Journal of Disaster Resilience in the Built Environment, 1(3), pp. 322-333. ISSN 1759-5916

Gyampoh-Vidogah, R; Moreton, R and Proverbs, D (2003) Implementing information management in construction: Establishing problems, concepts and practice. Construction Innovation, 3(3), pp. 157-173. ISSN 1471-4175

Ha, D. K. (2026) An evaluation and comparison of critical factors contributing to falls-from-height hazards in Vietnamese building projects. Journal of Engineering, Design and Technology, 24(3), pp. 831-858. ISSN 1726-0531

Harris, M A (2007) Developing a scorecard to evaluate the use of personal fall arrest systems. PhD thesis, University of Florida, USA.

Hasan, A and Kamardeen, I (2022) Occupational health and safety barriers for gender diversity in the Australian construction industry. Journal of Construction Engineering and Management, 148(9): 04022100, ISSN 0733-9364

Hassan, M E; Kandil, A; Senouci, A and Al-Derham, H (2016) Organizational behavior attributes and sustainable construction adoption: An econometric analysis using data from Qatar. Journal of Construction Engineering and Management, 142(12): 05016016, ISSN 0733-9364

Hindman, D P; Timko, P D and Nussbaum, M A (2013) Mechanical response of unbraced wood composite I-joist to walking loads. Journal of Construction Engineering and Management, 139(11): 4013023, ISSN 0733-9364

Hinze, J; Huang, X and Terry, L (2005) The nature of struck-by accidents. Journal of Construction Engineering and Management, 131(2), pp. 262-268. ISSN 0733-9364

Hinze, J; Pedersen, C and Fredley, J (1998) Identifying root causes of construction injuries. Journal of Construction Engineering and Management, 124(1), pp. 67-71. ISSN 0733-9364

Hinze, J and Russell, D B (1995) Analysis of fatalities recorded by OSHA. Journal of Construction Engineering and Management, 121(2), pp. 209-214. ISSN 0733-9364

Ho, S-P (2001) Real options and game theoretic valuation, financing and tendering for investments on build-operate-transfer projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Holt, G D and Edwards, D J (2005) Domestic builder selection in the uk housing repair and maintenance sector: a critique. Journal of Construction Research, 6(1), pp. 123-137. ISSN 1609-9451

Hu, K (2011) Three essays on modeling complex dynamic problems in health and safety. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Hu, K; Rahmandad, H; Smith-Jackson, T and Winchester, W (2011) Factors influencing the risk of falls in the construction industry: A review of the evidence. Construction Management and Economics, 29(4), pp. 397-416. ISSN 1466433X

Hu, Xiaoqiang (2023) New approaches to improving highway design, safety, and visual presentation. PhD thesis, Purdue University, USA.

Hua, G B and Pin, T H O (2000) Forecasting construction industry demand, price and productivity in Singapore: The Box-Jenkins approach. Construction Management and Economics, 18(5), pp. 607-618. ISSN 01446193

Huang, H; Hu, H; Xu, F and Zhang, Z (2024) Kinesiology-inspired assessment of intrusion risk based on human motion features. Journal of Construction Engineering and Management, 150(7): 04024072, ISSN 0733-9364

Huang, X and Hinze, J (2003) Analysis of construction worker fall accidents. Journal of Construction Engineering and Management, 129(3), pp. 262-271. ISSN 0733-9364

Ibrahim, A D (2007) The development of a procurement strategy for primary health care facilities in Nigeria. PhD thesis, Loughborough University, UK.

Indrastuti (2014) Unit cost modelling of public building project in Kepulauan Riau, Indonesia. PhD thesis, University of Malaya, Malaysia.

Irizarry, J and Abraham, D M (2006) Assessment of risk perception of ironworkers. Journal of Construction Research, 7(1), pp. 111-132. ISSN 1609-9451

Johnson, H M; Singh, A and Young, R H F (1998) Fall protection analysis for workers on residential roofs. Journal of Construction Engineering and Management, 124(5), pp. 418-428. ISSN 0733-9364

Kamardeen, I and Hasan, A (2022) Occupational health and safety implications of an aging workforce in the Australian construction industry. Journal of Construction Engineering and Management, 148(10): 04022112, ISSN 0733-9364

Karim, M T; Ahmed, S; Hoque, M N; Iorio, J and Abudayyeh, O (2025) Evaluating the management's role in addressing gender and racial disparities to promote DEI in the US construction industry: Exploratory study. Journal of Construction Engineering and Management, 151(9): 05025010, ISSN 0733-9364

Khanh, H. D.; Tiep, N. V. and Nguyen, K. V. (2026) EFA models for evaluating stakeholder perceptions of falls-from-height risks in building projects: A case study from Vietnam. Journal of Engineering, Design and Technology, 24(6), pp. 1483-1509. ISSN 1726-0531

Kim, D and Xiong, S (2025) Enhancing worker safety: Real-time automated detection of personal protective equipment to prevent falls from heights at construction sites using improved yolov8 and edge devices. Journal of Construction Engineering and Management, 151(1): 04024187, ISSN 0733-9364

Kwok, C; Young, R J and Kirkham, R J (2010) Risk and asset management in privatization/private finance of public utiliities: A risk investigation of water infrastructure projects in China. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Lestari, R I; Guo, B H W and Goh, Y M (2019) Causes, solutions, and adoption barriers of falls from roofs in the Singapore construction industry. Journal of Construction Engineering and Management, 145(5): 4019027, ISSN 0733-9364

Levinson, D M (1998) On whom the toll falls: A model of network financing. PhD thesis, University of California, Berkeley, USA.

Lewis, T M (2007) Impact of globalization on the construction sector in developing countries. Construction Management and Economics, 25(1), pp. 7-23. ISSN 1466433X

Li, J.; Ouyang, Y.; Dai, Q. and Luo, X. (2026) Impact of age on cognitive states influencing falling from heights in high-altitude construction: Evidence from a virtual reality and electroencephalogram study. Journal of Construction Engineering and Management, 152(7): 04026101, ISSN 0733-9364

Liang, J; Vishnupriya, V; Le, A and Shen, X (2025) Future directions for advancing Green Star nz to achieve zero-carbon goals: Insights from industry professionals. International Journal of Building Pathology and Adaptation, 43(8), pp. 41-58. ISSN 2398-4708

Lingard, H and Holmes, N (2001) Understanding of occupational health and safety risk control in small business construction firms: Barriers to implementing technological controls. Construction Management and Economics, 19(2), pp. 217-226. ISSN 01446193

Lonsdale, J H (2004) Situational awareness and risk perception of operatives using portable ladders in the construction industry. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Lonsdale, J H (2011) Falls from height: risk perception of ladder users within the UK construction industry. PhD thesis, Heriot-Watt University, UK.

Lopes, Carmen Silvia Gonçalves (2016) Active learning in training engineer: The influence of the use of learning strategies for skills based on a systemic view. PhD thesis, Universidade de São Paulo, Brazil.

McCabe, B Y (1997) An automated modeling approach for construction performance improvement using simulation and belief networks. PhD thesis, University of Alberta, Canada.

McKay, L J (2010) The effect of offsite construction on occupational health and safety. PhD thesis, Loughborough University, UK.

McMeel, D (2009) The artistry of construction: an investigation into construction as a creative process and the influence of mobile phones within domestic scale construction projects. PhD thesis, University of Edinburgh, UK.

McPeek, K T (2009) Collaborative design pedagogy: A naturalistic inquiry of architectural education. PhD thesis, Texas A&M University, USA.

Mei, X; Ma, W; Xu, F and Zhang, Z (2024) Vision-based detection of unsafe worker guardrail climbing based on posture and instance segmentation data fusion. Journal of Construction Engineering and Management, 150(11): 04024156, ISSN 0733-9364

Mello, Simone Gueresi de (2023) Urban transformation in pieces: Financing, regulation, and implementation tricks of social interest housing in the consortium urban operations of the city of São Paulo. PhD thesis, Universidade de São Paulo, Brazil.

Melzner, J; Zhang, S; Teizer, J and Bargstädt, H J (2013) A case study on automated safety compliance checking to assist fall protection design and planning in building information models. Construction Management and Economics, 31(6), pp. 661-674. ISSN 1466433X

Molenaar, K R (2005) Programmatic cost risk analysis for highway megaprojects. Journal of Construction Engineering and Management, 131(3), pp. 343-353. ISSN 0733-9364

Mwanaki Alinaitwe, H (2008) Improvement of labour performance and productivity in Uganda's building industry. PhD thesis, Lund University, Sweden.

Nadim, W and Goulding, J S (2010) Offsite production in the UK: The way forward? A UK construction industry perspective. Construction Innovation, 10(2), pp. 181-202. ISSN 1471-4175

Nguyen, T D H N; Park, S; Jeong, J and Ahn, Y (2026) Post occupancy evaluation of the relocatable modular construction method for temporary educational facilities. Engineering, Construction and Architectural Management, 33(1), pp. 785-809. ISSN 0969-9988

Nguyen, L D; Tran, D Q and Chandrawinata, M P (2016) Predicting safety risk of working at heights using Bayesian networks. Journal of Construction Engineering and Management, 142(9): 04016041, ISSN 0733-9364

Nguyen, Tuan Anh (2019) Options and flexibility in PPP toll road projects. PhD thesis, University of New South Wales, Australia.

Okorafor, C and Osuizugbo, I C (2025) Occupant health and safety risk and opportunity in the delivery of building energy retrofits. International Journal of Building Pathology and Adaptation, 43(8), pp. 140-155. ISSN 2398-4708

Paunikar, A (1983) Performance constraints of housing prefabricators in India: 3 case studies. ArchD thesis, University of Michigan, USA.

Petcherdchoo, A (2004) Maintaining condition and safety of deteriorating bridges by probabilistic models and optimization. PhD thesis, University of Colorado at Boulder, USA.

Piao, Y; Xu, W; Wang, T K and Chen, J H (2021) Dynamic fall risk assessment framework for construction workers based on dynamic Bayesian network and computer vision. Journal of Construction Engineering and Management, 147(12): 04021171, ISSN 0733-9364

Qi, L; Zhai, H and Shuang, Q (2026) Attention-driven multiobject tracking for proactive fall safety management in construction. Journal of Construction Engineering and Management, 152(5): 04026052, ISSN 0733-9364

Qi, J (2011) Integration of construction worker fall safety in design through the use of building information modeling. PhD thesis, University of Florida, USA.

Raidén, A B; Dainty, A R J and Neale, R H (2004) Exemplary human resource development (hrd) within a large construction contractor. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Rashidi, A; Woon, G L; Dasandara, M; Bazghaleh, M and Pasbakhsh, P (2025) Smart personal protective equipment for intelligent construction safety monitoring. Smart and Sustainable Built Environment, 14(3), pp. 835-858. ISSN 2046-6099

Reyes Veras, P; Renukappa, S and Suresh, S (2022) Awareness of big data concept in the Dominican Republic construction industry: An empirical study. Construction Innovation, 22(3), pp. 465-486. ISSN 1471-4175

Rizzi, Dario (2025) Tools for sustainable design strategies: Optimization of integrated BIM-blockchain technologies and protocols for the application of minimum environmental criteria. PhD thesis, Università degli Studi di Ferrara, Italy.

Robertson, C M (2018) Migrant worker perceptions of life, work, health and safety in Kuwait: A construction industry perspective. PhD thesis, Auckland University of Technology, New Zealand.

Robinson, Benjamin Tyrell (2021) Identifying and pricing risk in residential development. PhD thesis, RMIT University, Australia.

Rodrigues, F; Antunes, F and Matos, R (2021) Safety plugins for risks prevention through design resourcing BIM. Construction Innovation, 21(2), pp. 244-258. ISSN 1471-4175

Rubio-Romero, J C; Rubio, M C and García-Hernández, C (2013) Analysis of construction equipment safety in temporary work at height. Journal of Construction Engineering and Management, 139(1), pp. 9-14. ISSN 0733-9364

Rungjang, K (2013) Public investment for developing port facilities within competitive market. PhD thesis, University of Wisconsin - Madison, USA.

Sadeghi, H; Cheung, C M; Yunusa-Kaltungo, A and Manu, P (2024) Occupational safety and health in modular integrated construction: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Salih, F and El-Adaway, I H (2024) Quantifying the impact of technology utilization on schedule and cost performance in construction projects. Journal of Construction Engineering and Management, 150(8): 04024078, ISSN 0733-9364

Salminen, S (1995) Serious occupational accidents in the construction industry. Construction Management and Economics, 13(4), pp. 299-306. ISSN 01446193

Sanseverino, Anna (2023) Application of BIM methodology for structural inspection and maintenance eco-systems: Semi-automated monitoring procedures to implement different kinds of data into enriched cooperative systems. PhD thesis, Università degli Studi di Salerno, Italy.

Santero, N J (2009) Pavements and the environment: A life-cycle assessment approach. PhD thesis, University of California, Berkeley, USA.

Sepasgozar, S M E; Davis, S; Loosemore, M and Bernold, L (2018) An investigation of modern building equipment technology adoption in the Australian construction industry. Engineering, Construction and Architectural Management, 25(8), pp. 1075-1091. ISSN 0969-9988

Shih, N J and Huang, Y S (2001) A study of reflection glare in taipei. Building Research & Information, 29(1), pp. 30-39. ISSN 0961-3218

Simon, M and Meyer, E L (2012) Low cost I-V system employing variable power supply unit as an electronic load. Journal of Engineering, Design and Technology, 10(3), pp. 330-344. ISSN 1726-0531

Smyth, H; Duryan, M and Kusuma, I (2019) Service design for marketing in construction: Tactical implementation in the "business development management". Built Environment Project and Asset Management, 9(1), pp. 87-99. ISSN 2044-124X

Sutton, R M (2019) The development of a sustainable construction design process. PhD thesis, University of Liverpool, UK.

Taheriattar, Reza (2018) Sustainability and adaptable/flexible infrastructure. PhD thesis, University of New South Wales, Australia.

Taiebat, M (2011) Tuning up BIM for safety analysis proposing modeling logics for application of BIM in DfS. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Tansey, P and Spillane, J (2016) From crisis to opportunity: Turnaround strategies of large Irish construction contractors during the period 2007-2015. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Tenah, K A (1979) Construction management information control systems (CMICS). PhD thesis, Texas A&M University, USA.

Tommelein, I D (2020) Design science research in construction management: Multi-disciplinary collaboration on the SightPlan system. Construction Management and Economics, 38(4), pp. 340-354. ISSN 01446193

Tong, T K L and Tam, C M (2003) Fuzzy optimisation of labour allocation by genetic algorithms. Engineering, Construction and Architectural Management, 10(2), pp. 146-155. ISSN 0969-9988

Tymvios, N and Gambatese, J A (2016) Perceptions about design for construction worker safety: Viewpoints from contractors, designers, and university facility owners. Journal of Construction Engineering and Management, 142(2): 04015078, ISSN 0733-9364

Tymvios, N; Smithwick, J and Behm, M (2025) Re-evaluating falls through skylights in the USA: has anything changed? Journal of Engineering, Design and Technology, 23(4), pp. 1137-1155. ISSN 1726-0531

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2018) Proactive safety measures: Quantifying the upright standing stability after sustained rebar tying postures. Journal of Construction Engineering and Management, 144(4): 04018010, ISSN 0733-9364

Vargas, C A (1998) Investigating construction falls using fault tree analysis and developing a prototype tool to reduce falls using expert system and computer-assisted instruction methods. PhD thesis, Ohio State University, USA.

Wade III, L R (2004) Effect of exposure to an inclined surface and height on gait kinematics and postural stability. PhD thesis, Auburn University, USA.

Wall, J; Carney, M; McNamee, F; Madden, D; Hurst, A; Vrasidas, C; Chanquoy, L; Baccino, T; Acar, E; Önwy-Yazici, E and Jordan, A (2007) The delivery of health and safety training applying multiple intelligences using virtual classes. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Waziri, N H; Usman, A M and Enaburekhan, J S (2015) Optimum temperature and solar radiation periods for kano using flat plate collector. Journal of Engineering, Design and Technology, 13(4), pp. 570-578.

Weigend Rodríguez, R; Pomponi, F; Webster, K and D'Amico, B (2020) The future of the circular economy and the circular economy of the future. Built Environment Project and Asset Management, 10(4), pp. 529-546. ISSN 2044-124X

Wetzel, E M (2016) The use of a BIM-based framework to support safe facility management processes. PhD thesis, Virginia Tech, USA.

Wijeratne, W M P U; Perera, B A K S and De Silva, L (2014) Identification and assessment risks in maintenance operations. Built Environment Project and Asset Management, 4(4), pp. 384-405. ISSN 2044-124X

Winch, G and Carr, B (2001) Benchmarking on-site productivity in France and the UK: A CALIBRE approach. Construction Management and Economics, 19(6), pp. 577-590. ISSN 01446193

Wong, F K W; Chan, A P C; Yam, M C H; Wong, E Y S; Tse, K T C; Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(2), pp. 130-142. ISSN 1726-0531

Wong, L; Wang, Y; Law, T and Lo, C T (2016) Association of root causes in fatal fall-from-height construction accidents in Hong Kong. Journal of Construction Engineering and Management, 142(7): 4016018, ISSN 0733-9364

Wu, Shaoze (2024) Enhancing construction workforce safety through formulating an augmented reality digital twin system. PhD thesis, RMIT University, Australia.

Xie, L.; Yu, Z. and Zhao, X. (2025) Assessing construction safety risks in large urban complex projects: An interval ordinal priority approach. Engineering, Construction and Architectural Management, 33(5), pp. 3996-4018. ISSN 0969-9988

Yang, C (2023) Reliability-based methodology for design and evaluation of concrete bridge decks. PhD thesis, Rutgers The State University of New Jersey, School of Graduate Studies, USA.

Yu, B (2007) Essays on structural analysis of procurement auctions. PhD thesis, Ohio State University, USA.

Yu, Y (2021) Road network maintenance and repair considering day-to-day traffic dynamics and transient congestion. PhD thesis, Imperial College London, UK.

Zhang, M; Cao, T and Zhao, X (2019) Using smartphones to detect and identify construction workers' near-miss falls based on ann. Journal of Construction Engineering and Management, 145(1): 04018120, ISSN 0733-9364

Zhang, M; Xue, X; Luo, T; Li, M and Tang, X (2024) The supportability evaluation of cross-regional major infrastructure projects based on the combination weighting of the game theory-cloud model. Engineering, Construction and Architectural Management, 31(9), pp. 3679-3705. ISSN 0969-9988

Zhang, X; Liu, T; Rahman, A and Zhou, L (2023) Blockchain applications for construction contract management: A systematic literature review. Journal of Construction Engineering and Management, 149(1): 03122011, ISSN 0733-9364

Zhou, H.; Xu, M. and Yang, Q. (2026) Quantitative safety risk coupling assessment method based on complex network theory: A case study in super-high-rise building construction. Journal of Construction Engineering and Management, 152(7): 04026095, ISSN 0733-9364

Zhuang, J; Wang, Y; Yan, Z and Liu, J (2026) Evolutionary game analysis on the cooperative mechanism of government subsidies and market-based risk mitigation institutions in managing ecosustainable projects' default risks. Journal of Construction Engineering and Management, 152(3): 04025270, ISSN 0733-9364

Zuluaga, C M; Albert, A and Arroyo, P (2018) Protecting bridge maintenance workers from falls: Evaluation and selection of compatible fall protection supplementary devices. Journal of Construction Engineering and Management, 144(8): 04018073, ISSN 0733-9364

Zuluaga, C M; Albert, A and Winkel, M A (2020) Improving safety, efficiency, and productivity: Evaluation of fall protection systems for bridge work using wearable technology and utility analysis. Journal of Construction Engineering and Management, 146(2): 04019107, ISSN 0733-9364

Zuluaga Santa, C M (2018) Protecting bridge maintenance workers: Evaluating fall protection supplementary devices using virtual prototyping and wearable technology. PhD thesis, North Carolina State University, USA.