Items with Index Term: failure mode

Abdelgawad, M A M (2011) Hybrid decision support system for risk criticality assessment and risk analysis. PhD thesis, University of Alberta, Canada.

Abdelgawad, M A M and Fayek, A R (2010) Risk management in the construction industry using combined fuzzy FMEA and fuzzy AHP. Journal of Construction Engineering and Management, 136(9), pp. 1028-1036. ISSN 0733-9364

Abdelgawad, M A M and Fayek, A R (2012) Comprehensive hybrid framework for risk analysis in the construction industry using combined failure mode and effect analysis, fault trees, event trees, and fuzzy logic. Journal of Construction Engineering and Management, 138(5), pp. 642-651. ISSN 0733-9364

Abu Dabous, S; Zadeh, T and Ibrahim, F (2024) A failure mode, effects and criticality analysis-based method for formwork assessment and selection in building construction. International Journal of Building Pathology and Adaptation, 42(5), pp. 1019-1040. ISSN 2398-4708

Allahi, Fahimeh (2020) Development of simulation based approaches for cost estimation and effect analysis in industrial and humanitarian projects, including system dynamic model and Monte Carlo simulation. PhD thesis, Università degli Studi di Genova, Italy.

Ayyub, B M (1983) Structural safety analysis of reinforced concrete buildings during construction (fuzzy set). PhD thesis, Georgia Institute of Technology, USA.

Babatunde, S O and Perera, S (2017) Cross-sectional comparison of public-private partnerships in transport infrastructure development in Nigeria. Engineering, Construction and Architectural Management, 24(6), pp. 875-900. ISSN 0969-9988

Barker, R (2006) Waste assessment and application of improvement techniques in UK private housebuilding supply chains. PhD thesis, Cardiff University, UK.

Chakhrit, A and Chennoufi, M (2023) Failure mode, effects and criticality analysis improvement by using new criticality assessment and prioritization based approach. Journal of Engineering, Design and Technology, 21(5), pp. 1545-1567. ISSN 1726-0531

Chu, L (2017) Incorporation of functional considerations in highway pavement design and operations. PhD thesis, National University of Singapore, Singapore.

Clarkson, Luke (2021) Comprehensive monitoring strategy for tailings dams. PhD thesis, University of Queensland, Australia.

Comiskey, D and Wilson, K (2020) A performance barrier? Cavity barrier installation in wall envelope makeups. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Derradji, R and Hamzi, R (2020) Multi-criterion analysis based on integrated process-risk optimization. Journal of Engineering, Design and Technology, 18(5), pp. 1015-1035. ISSN 1726-0531

El-Haram, M A and Horner, R M W (2003) Application of the principles of ILS to the development of cost effective maintenance strategies for existing building stock. Construction Management and Economics, 21(3), pp. 283-296. ISSN 01446193

Gaber Abubaker, A (2016) Factors affecting maintenance labour productivity in the building industry. PhD thesis, University of Dundee, UK.

Galanis, P (2014) Probabilistic methods to identify seismically hazardous older-type concrete frame buildings. PhD thesis, University of California, Berkeley, USA.

Gunay, H B; Shen, W and Yang, C (2019) Text-mining building maintenance work orders for component fault frequency. Building Research & Information, 47(5), pp. 518-533. ISSN 0961-3218

Hariri-Ardebili, M A (2015) Performance based earthquake engineering of concrete dams. PhD thesis, University of Colorado at Boulder, USA.

Hassan, A; Purnomo, M R A and Anugerah, A R (2020) Fuzzy-analytical-hierarchy process in failure mode and effect analysis (FMEA) to identify process failure in the warehouse of a cement industry. Journal of Engineering, Design and Technology, 18(2), pp. 378-388. ISSN 1726-0531

Hobart, C; Thomson, D; Dainty, A; Fernie, S and Drewniak, D (2015) Closing the energy performance gap in zero carbon homes – pro-active identification, prioritisation and mitigation of causes using fmea. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Hopkin, D J (2011) The fire performance of engineered timber products and systems. EngD thesis, Loughborough University, UK.

Hovde, G O (1995) Fatigue and overload reliability of offshore structural systems, considering the effect of inspection and repair. DrIng thesis, Universitetet i Trondheim Norges Tekniske Hogskole, Norway.

Isa, M F M (2013) Quality modeling and improvement of university facilities services using six-sigma: A case study on wayne state university FPM services. PhD thesis, Wayne State University, USA.

Jahren, C T and Hancher, D E (1989) Evaluation of new concepts for cellular structure construction. Journal of Construction Engineering and Management, 115(1), pp. 15-34. ISSN 0733-9364

Karamoozian, A and Wu, D (2020) A hybrid risk prioritization approach in construction projects using failure mode and effective analysis. Engineering, Construction and Architectural Management, 27(9), pp. 2661-2686. ISSN 0969-9988

Lee, J S (2021) Life cycle costing for exterior materials on building façade. Journal of Construction Engineering and Management, 147(7): 2068, ISSN 0733-9364

Liang, R; Xue, Z and Chong, H Y (2023) Risk evaluation of logistics park projects' lifecycle during the COVID-19 pandemic: Failure mode and effects analysis. Journal of Construction Engineering and Management, 149(1): 04022153, ISSN 0733-9364

Lokuge, W; Gamage, N and Setunge, S (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset Management, 6(3), pp. 332-344. ISSN 2044-124X

Maali, M; Orhan, S N; Sagiroglu, M and Cirpici, B K (2023) Analyzing of bolted joints for connecting rectangular hollow sections in reticulated shells. Architectural Engineering and Design Management, 19(5), pp. 550-566. ISSN 1745-2007

Mecca, S and Masera, M (1999) Technical risk analysis in construction by means of fmea methodology. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Melgarejo, J A (1987) A decision model for human error in the design and construction process. PhD thesis, University of Michigan, USA.

Milberg, C T (2006) Application of tolerance management to civil systems. PhD thesis, University of California, Berkeley, USA.

Morcos, M S (1994) Decision support system for reliability assessment of management systems of organisations in the construction industry. PhD thesis, University of Leeds, UK.

Murphy, M; Heaney, G and Perera, S (2011) A methodology for evaluating construction innovation constraints through project stakeholder competencies and FMEA. Construction Innovation, 11(4), pp. 416-440. ISSN 1471-4175

Murphy, M E; Perera, S and Heaney, G (2015) Innovation management model: A tool for sustained implementation of product innovation into construction projects. Construction Management and Economics, 33(3), pp. 209-232. ISSN 01446193

Ongkowijoyo, C and Doloi, H (2017) Determining critical infrastructure risks using social network analysis. International Journal of Disaster Resilience in the Built Environment, 8(1), pp. 5-26. ISSN 1759-5916

Peng, M (2012) Dam risk analysis and dynamic decision making. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Rahimi, Y; Tavakkoli-Moghaddam, R; Iranmanesh, S H and Vaez-Alaei, M (2018) Hybrid approach to construction project risk management with simultaneous FMEA/ISO 31000/evolutionary algorithms: Empirical optimization study. Journal of Construction Engineering and Management, 144(6): 04018043, ISSN 0733-9364

Rezaee Arjroody, A; Hosseini, S A; Akhbari, M; Safa, E and Asadpour, J (2024) Accurate estimation of cost and time utilizing risk analysis and simulation (case study: Road construction projects in Iran). International Journal of Construction Management, 24(1), pp. 19-30. ISSN 1562-3599

Sakhakarmi, S (2022) Automated approach for the enhancement of scaffolding structure monitoring with strain sensor data. PhD thesis, University of Nevada, Las Vegas, USA.

Sarkar, D and Singh, M (2022) Risk analysis by integrated fuzzy expected value method and fuzzy failure mode and effect analysis for an elevated metro rail project of ahmedabad, India. International Journal of Construction Management, 22(10), pp. 1818-1829. ISSN 1562-3599

Tafazzoli, M (2017) Dynamic risk analysis of construction delays using fuzzy-failure mode effects analysis. PhD thesis, University of Nevada, Las Vegas, USA.

Tavakolan, M and Mohammadi, A (2018) Risk management workshop application: A case study of Ahwaz Urban Railway project. International Journal of Construction Management, 18(3), pp. 260-274. ISSN 1562-3599

Visscher, H; Suddle, S and Meijer, F (2008) Quantitative risk analysis as a supporting tool for safety protocols at multi-functional urban locations. Construction Innovation, 8(4), pp. 269-279. ISSN 1471-4175

Wang, H; Shen, J and Gao, D (2019) Seismic damage of gravity abutment in liquefied ground. Journal of Engineering, Design and Technology, 17(1), pp. 53-76. ISSN 1726-0531

Wang, J (2004) Hybrid genetic algorithms for reliability assessment of structural system. PhD thesis, City University of New York, USA.

Wiliem, Leonard (2008) Incorporating interdependence in risk likelihood analysis to enhance diagnostics in condition monitoring. PhD thesis, Queensland University of Technology, Australia.

Wu, Z (2024) Optimized structural health monitoring for inland waterways infrastructure using model-based diagnostics and prognostics. PhD thesis, University of California, San Diego, USA.

Yazdani, M; Abdi, M R; Kumar, N; Keshavarz-Ghorabaee, M and Chan, F T S (2019) Improved decision model for evaluating risks in construction projects. Journal of Construction Engineering and Management, 145(5): 04019024, ISSN 0733-9364