Items with Index Term: ergonomics

Afeez, A and Kumar, A (2013) Application of CAD and reverse engineering methodology for development of complex assemblies. Journal of Engineering, Design and Technology, 11(3), pp. 375-390. ISSN 1726-0531

Aliasgari, R; Fan, C; Li, X; Golabchi, A and Hamzeh, F (2024) MOCAP and ai-based automated physical demand analysis for workplace safety. Journal of Construction Engineering and Management, 150(7): 04024060, ISSN 0733-9364

Alwasel, A; Abdel-Rahman, E M; Haas, C T and Lee, S (2017) Experience, productivity, and musculoskeletal injury among masonry workers. Journal of Construction Engineering and Management, 143(6): 05017003, ISSN 0733-9364

Anwer, S; Li, H; Umer, W; Antwi-Afari, M F; Mehmood, I; Yu, Y; Haas, C and Wong, A Y L (2023) Identification and classification of physical fatigue in construction workers using linear and nonlinear heart rate variability measurements. Journal of Construction Engineering and Management, 149(7): 04023057, ISSN 0733-9364

Aranda-Mena, G (2003) Mapping workers' cognitive structures of construction site hazards. PhD thesis, University of Reading, UK.

Assaf, M; Al-Hussein, M and Li, X (2024) Critical review of virtual reality applications in offsite construction research. Journal of Construction Engineering and Management, 150(11): 03124007, ISSN 0733-9364

Baborska-Narożny, M and Stevenson, F (2019) Service controls interfaces in housing: Usability and engagement tool development. Building Research & Information, 47(3), pp. 290-304. ISSN 0961-3218

Balasubramanian, V and Prasad, G S (2007) Manual bar bending-an occupational hazard for construction workers in developing nations. Journal of Construction Engineering and Management, 133(10), pp. 791-797. ISSN 0733-9364

Barbosa, Adriano Aurelio Ribeiro (2014) Implementing a sound power method for testing noise on masonry saw. PhD thesis, Universidade Estadual de Campinas, Brazil.

Bernold, L E; Lorenc, S J and Davis, M L (2001) Technological intervention to eliminate back injury risks for nailing. Journal of Construction Engineering and Management, 127(3), pp. 245-250. ISSN 0733-9364

Binti Ismail, S H (2016) Musculoskeletal modelling for ergonomics: shoulder & low back loading in bricklaying. PhD thesis, Imperial College London, UK.

Brosque, C; Skeie, G and Fischer, M (2021) Comparative analysis of manual and robotic concrete drilling for installation hangers. Journal of Construction Engineering and Management, 147(3): 05021001, ISSN 0733-9364

C.R, A; Murali, S; Haq, M A; Bysani, T N and Narahari, N S (2023) Exoskeleton for lower extremities based on Indian anthropomorphism with gait allowance: Design and development. Journal of Engineering, Design and Technology, 21(5), pp. 1343-1372. ISSN 1726-0531

Chellappa, V and Luximon, Y (2026) Computer-aided technologies for posture-based ergonomic risk assessment in construction: A systematic review. International Journal of Construction Management, 26(2), pp. 316-331. ISSN 1562-3599

Chellappa, V; Srivastava, V and Salve, U R (2021) A systematic review of construction workers' health and safety research in India. Journal of Engineering, Design and Technology, 19(6), pp. 1488-1504. ISSN 1726-0531

Chen, Xinyu (2025) Multimodal data fusion-based ergonomic assessment method for construction workers. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Dallasega, P; Schulze, F and Revolti, A (2023) Augmented reality to overcome visual management implementation barriers in construction: A mep case study. Construction Management and Economics, 41(3), pp. 232-255. ISSN 01446193

Dias Barkokebas, R; Al-Hussein, M and Li, X (2022) VR-MOCAP-enabled ergonomic risk assessment of workstation prototypes in offsite construction. Journal of Construction Engineering and Management, 148(8): 04022064, ISSN 0733-9364

Dias Barkokebas, R and Li, X (2023) VR-ret: A virtual reality-based approach for real-time ergonomics training on industrialized construction tasks. Journal of Construction Engineering and Management, 149(10): 04023098, ISSN 0733-9364

Dutta, A; Breloff, S P; Dai, F; Sinsel, E W; Warren, C M and Wu, J Z (2020) Identifying potentially risky phases leading to knee musculoskeletal disorders during shingle installation operations. Journal of Construction Engineering and Management, 146(3): 04019118, ISSN 0733-9364

Eaves, S; Gyi, D and Gibb, A (2014) Construction workers' views on workplace design and 'healthy' ageing. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Eaves S, G D G A (2013) Building healthy construction workers by better workplace design: Understanding the context. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Eilouti, B (2022) Form follows users: A framework for system-based design. Architectural Engineering and Design Management, 18(3), pp. 204-225. ISSN 1745-2007

English, J; Haupt, T C and Smallwood, J J (2006) Women, construction and health and safety (H&S): South African and Tanzanian perspectives. Journal of Engineering, Design and Technology, 4(1), pp. 18-28. ISSN 1726-0531

Erkan, I (2020) A system proposal for rapid detecting of anthropometric data and affecting design strategies. Journal of Engineering, Design and Technology, 18(6), pp. 1793-1822. ISSN 1726-0531

Everett, J G and Kelly, D L (1998) Drywall joint finishing: Productivity and ergonomics. Journal of Construction Engineering and Management, 124(5), pp. 347-353. ISSN 0733-9364

Franke, M and Nadler, C (2021) Towards a holistic approach for assessing the impact of IEQ on satisfaction, health, and productivity. Building Research & Information, 49(4), pp. 417-444. ISSN 0961-3218

Gatti, U C (2012) Measuring and evaluating physical strain to improve construction workforce productivity. PhD thesis, University of New Mexico, USA.

Ghosh, A; Jha, S K and Hasan, A (2022) A scientometric review of technological applications in occupational health and safety management in the construction industry. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Golabchi, A; Han, S; Seo, J; Han, S; Lee, S and Al-Hussein, M (2015) An automated biomechanical simulation approach to ergonomic job analysis for workplace design. Journal of Construction Engineering and Management, 141(8): 04015020, ISSN 0733-9364

Goldswain C, S J (2013) Key inputs into a designing for construction health, safety, and ergonomics model in South Africa. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Goodrum, P M (2001) The impact of equipment technology on productivity in the United States construction industry. PhD thesis, University of Texas at Austin, USA.

Goodrum, P M and Gangwar, M (2004) The relationship between changes in equipment technology and wages in the US construction industry. Construction Management and Economics, 22(3), pp. 291-301. ISSN 01446193

Goodrum, P M and Haas, C T (2002) Partial factor productivity and equipment technology change at activity level in U.S. Construction industry. Journal of Construction Engineering and Management, 128(6), pp. 463-472. ISSN 0733-9364

Harvey, E (2019) Rethinking construction safety. PhD thesis, Loughborough University, UK.

Hendrickse, C and Thurner, T W (2019) Design intervention at major technological installations: Investigating the ergonomics of the South African Large Telescope (SALT). Journal of Engineering, Design and Technology, 17(2), pp. 402-413. ISSN 1726-0531

Ibrahim, K; Simpeh, F and Adebowale, O J (2025) Benefits and challenges of wearable safety devices in the construction sector. Smart and Sustainable Built Environment, 14(1), pp. 50-71. ISSN 2046-6099

Inyang, N I (2013) A framework for ergonomic assessment of residential construction tasks. PhD thesis, University of Alberta, Canada.

Jia, A Y; Loosemore, M; Gilbert, D and Rowlinson, S (2016) Shielding workers from heat stress: Reconciling the paradoxes of protection and production logics. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Katoch, V and Mohan, S (2019) Design and fabrication of a safety frame for workers carrying out head lifting at construction sites. Journal of Engineering, Design and Technology, 17(6), pp. 1250-1265. ISSN 1726-0531

Kou, J.; Zhou, Z.; Guo, L.; Yang, Y.; Han, Y.; Zhang, C. and Ni, X. (2026) Multiangle computer vision-based assessment of work-related musculoskeletal disorders in construction workers. Journal of Construction Engineering and Management, 152(9): 04026141, ISSN 0733-9364

Kulkarni, V S and Devalkar, R V (2019) Postural analysis of building construction workers using ergonomics. International Journal of Construction Management, 19(6), pp. 464-471. ISSN 1562-3599

Li, X; Han, S; Gül, M; Al-Hussein, M and El-Rich, M (2018) 3D visualization-based ergonomic risk assessment and work modification framework and its validation for a lifting task. Journal of Construction Engineering and Management, 144(1): 04017093, ISSN 0733-9364

Liu, M; Han, S and Lee, S (2016) Tracking-based 3D human skeleton extraction from stereo video camera toward an on-site safety and ergonomic analysis. Construction Innovation, 16(3), pp. 348-367. ISSN 1471-4175

Mani, N (2015) A framework for estimating labor productivity frontiers. PhD thesis, University of Nebraska - Lincoln, USA.

Ng, A W Y and Chan, A H S (2017) Mental models of construction workers for safety-sign representation. Journal of Construction Engineering and Management, 143(2): 04016091, ISSN 0733-9364

Obiozo, R N (2018) The role of psychosocial recuperative therapy in enhancing construction performance on projects. PhD thesis, Nelson Mandela University, South Africa.

Obiozo, R N and Smallwood, J J (2015) Biophilic construction site model: Enhancing the motivational and humanistic value of the green construction site. Journal of Construction Engineering and Management, 141(3), ISSN 0733-9364

Obiozo R, S R (2013) The role of 'greening' and an ecosystem approach to enhancing construction ergonomics. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Panjaitan, N; Hasnida, A S and Ali, A Y (2022) Mesoergonomics, the missing part of the macroergonomics and microergonomics approach. Journal of Engineering, Design and Technology, 20(3), pp. 649-670. ISSN 1726-0531

Pesantes-Tavares, E R (2011) Construction worker health: A web-based approach to selecting alternatives to hazardous procedures. PhD thesis, University of Florida, USA.

Rodriguez, F S; Spilski, J; Hekele, F; Beese, N O and Lachmann, T (2020) Physical and cognitive demands of work in building construction. Engineering, Construction and Architectural Management, 27(3), pp. 745-764. ISSN 0969-9988

Ryu, J; Alwasel, A; Haas, C T and Abdel-Rahman, E M (2020) Analysis of relationships between body load and training, work methods, and work rate: Overcoming the novice mason's risk hump. Journal of Construction Engineering and Management, 146(8): 04020097, ISSN 0733-9364

Ryu, J; Banting, B; Abdel-Rahman, E M and Haas, C T (2023) Ergonomic characteristics of expert masons. Journal of Construction Engineering and Management, 149(1): 04022150, ISSN 0733-9364

Ryu, J; Diraneyya, M M; Haas, C T and Abdel-Rahman, E M (2021) Analysis of the limits of automated rule-based ergonomic assessment in bricklaying. Journal of Construction Engineering and Management, 147(2): 04020163, ISSN 0733-9364

Sadeghi, H; Cheung, C M; Yunusa-Kaltungo, A and Manu, P (2024) Occupational safety and health in modular integrated construction: A systematic literature review. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Seo, J; Lee, S and Seo, J (2016) Simulation-based assessment of workers' muscle fatigue and its impact on construction operations. Journal of Construction Engineering and Management, 142(11): 04016063, ISSN 0733-9364

Smallwood, J (2007) The influence of architectural designers on construction ergonomics. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Smallwood, J J and Haupt, T C (2009) Construction ergonomics: Perspectives of female and male production workers. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Spielholz, P; Davis, G and Griffith, J (2006) Physical risk factors and controls for musculoskeletal disorders in construction trades. Journal of Construction Engineering and Management, 132(10), pp. 1059-1068. ISSN 0733-9364

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Torres Calderon, W (2022) Video representation learning for vision-driven activity analysis in construction. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2017) Identification of biomechanical risk factors for the development of lower-back disorders during manual rebar tying. Journal of Construction Engineering and Management, 143(1): 04016080, ISSN 0733-9364

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2017) Low-cost ergonomic intervention for mitigating physical and subjective discomfort during manual rebar tying. Journal of Construction Engineering and Management, 143(10): 04017075, ISSN 0733-9364

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2018) Proactive safety measures: Quantifying the upright standing stability after sustained rebar tying postures. Journal of Construction Engineering and Management, 144(4): 04018010, ISSN 0733-9364

Wang, D; Dai, F and Ning, X (2015) Risk assessment of work-related musculoskeletal disorders in construction: State-of-the-art review. Journal of Construction Engineering and Management, 141(6): 04015008, ISSN 0733-9364

Wu, Shaoze (2024) Enhancing construction workforce safety through formulating an augmented reality digital twin system. PhD thesis, RMIT University, Australia.

Zaalouk, A and Han, S (2021) Parameterized design optimization framework for worker-friendly workplaces in modular construction. Journal of Construction Engineering and Management, 147(5): 04021030, ISSN 0733-9364

Zhang, H and Lin, Y (2023) Prediction of ergonomic risks and impacts on construction schedule through agent-based simulation. Journal of Construction Engineering and Management, 149(3): 04022181, ISSN 0733-9364

Zhang, Z (2021) Participatory ergonomics in construction: Enabling practice-to-research-to-practice via the 2safemodel. PhD thesis, University of Washington, USA.

Zhao, J (2020) Towards a proactive real-time data-driven musculoskeletal disorders prevention approach in construction. PhD thesis, Pennsylvania State University, USA.