Items with Index Term: environmental design

Abanomi, W M (2005) Environmental design of prototype school buildings in hot, arid regions with special reference to Riyadh, Saudi Arabia. PhD thesis, Cardiff University, UK.

Abdallah, M A A (2014) Optimizing the selection of sustainability measures for existing buildings. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Abdallah, M A A; El-Rayes, K and Liu, L (2016) Minimizing upgrade cost to achieve LEED certification for existing buildings. Journal of Construction Engineering and Management, 142(2): 04015073, ISSN 0733-9364

Ade-Ojo, O C (2022) Awareness of the LEED requirements for green housing development among built-environment professionals in Nigeria. Built Environment Project and Asset Management, 12(4), pp. 521-536. ISSN 2044-124X

Adzande, P; Gyuse, T T and Atser, J (2018) Correlates of crime in urban Makurdi, Nigeria. African Journal of Built Environment Research, 2(1), pp. 21-40. ISSN 2414-0236

Aktas, C B (2011) Impact of product lifetime on life cycle assessment results. PhD thesis, University of Pittsburgh, USA.

Al-Ghamdi, S G (2015) Advancing green building rating systems using life-cycle assessment. PhD thesis, University of Pittsburgh, USA.

Alhusban, A A and Almshaqbeh, S N (2024) Delivering an inclusive built environment for physically disabled people in public universities (Jordan as a case study). Journal of Engineering, Design and Technology, 22(6), pp. 1980-1998. ISSN 1726-0531

Almufarrej, A M and Erfani, T (2023) Climate, buildings' envelope design and energy patterns: Improving energy performance of new buildings in Kuwait. Engineering, Construction and Architectural Management, 30(1), pp. 172-188. ISSN 0969-9988

Alothaimeen, I (2018) Multi-objective optimization for LEED: New construction using genetic algorithms. PhD thesis, Illinois Institute of Technology, USA.

Altomonte, S; Schiavon, S; Kent, M G and Brager, G (2019) Indoor environmental quality and occupant satisfaction in green-certified buildings. Building Research & Information, 47(3), pp. 255-274. ISSN 0961-3218

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(3), pp. 290-303. ISSN 2044-124X

Alwan, Z; Greenwood, D and Gledson, B (2015) Rapid LEED evaluation performed with BIM-based sustainability analysis on a virtual construction project. Construction Innovation, 15(2), pp. 134-150. ISSN 1471-4175

Arif, M; Syal, M and Hightower, R (2013) Investigating the green leadership in energy and environmental design (LEED) servicescape scale in Brazil. Construction Innovation, 13(3), pp. 242-265. ISSN 1471-4175

Azari Najafabadi, R (2013) An evaluation framework for the integrated design process of sustainable high-performance buildings. PhD thesis, University of Washington, USA.

Bamford, N; Charters, W; Lacey, R; Mills, A; Radovic, D; Robinson, J; Williams, P and Yencken, D (1998) Environment and sustainability in commercial office buildings. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Bangwal, D and Tiwari, P (2019) Environmental design and awareness impact on organization image. Engineering, Construction and Architectural Management, 26(1), pp. 29-45. ISSN 0969-9988

Barrows, M; Clevenger, C M; Abdallah, M and Wu, W (2020) Value of certifications when seeking construction employment. International Journal of Construction Education and Research, 16(1), pp. 61-79. ISSN 1557-8771

Bilec, M M (2007) A hybrid life cycle assessment model for construction processes. PhD thesis, University of Pittsburgh, USA.

Bilec, Melissa M (2007) A hybrid life cycle assessment model for construction processess. PhD thesis, University of Pittsburgh, USA.

Birchmore, R C; Berry, T A; Wallis, S L; Tsai, S and Hernandez, G (2023) Thermal performance and indoor air quality in new, medium density houses: auckland, New Zealand. International Journal of Building Pathology and Adaptation, 41(1), pp. 279-300. ISSN 23984708

Bowers, C T (2019) The next generation of residential construction: Adoption of green building programs, environmentally certified wood products and the transparency of environmental friendliness. PhD thesis, University of Washington, USA.

Bruce, R D; Gebken, R J and Strong, S D (2009) The impact of the leadership in energy and environmental design accredited professional (LEED-ap) credential on prime/general contractor employees. International Journal of Construction Education and Research, 5(3), pp. 182-196. ISSN 1557-8771

Burke, R D; Parrish, K and El Asmar, M (2018) Environmental product declarations: Use in the architectural and engineering design process to support sustainable construction. Journal of Construction Engineering and Management, 144(5): 04018026, ISSN 0733-9364

Byrd, R H (1981) The mathematical modelling of the environmental performance of buildings as an aid in the design process. PhD thesis, Aston University, UK.

Choi, K; Son, K; Woods, P and Park, Y J (2012) LEED public transportation accessibility and its economic implications. Journal of Construction Engineering and Management, 138(9), pp. 1095-1102. ISSN 0733-9364

Cozens, P; Waters, J and Neale, R (2002) A virtual reality approach to personal safety and the design of built environment facilities. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Dessouky, N; Wheeler, S and Salama, A M (2024) Including local actors' perspective in neighborhood sustainability assessment: Evidence from Dubai's sustainable city. Smart and Sustainable Built Environment, 13(5), pp. 1117-1133. ISSN 2046-6099

Dewlaney, K S and Hallowell, M (2012) Prevention through design and construction safety management strategies for high performance sustainable building construction. Construction Management and Economics, 30(2), pp. 165-177. ISSN 1466433X

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Doczy, R (2018) Risk-benefit analysis and optimization of LEED-certified school buildings design and construction: Statisitical and machine learning approaches. PhD thesis, Florida State University, USA.

Driza, P J N and Park, N K (2014) Occupant satisfaction in LEED-certified higher education buildings. Smart and Sustainable Built Environment, 3(3), pp. 223-236. ISSN 2046-6099

Duckles, B M (2009) The green building industry in California: From ideals to buildings. PhD thesis, University of Arizona, USA.

Eisenstein, W; Fuertes, G; Kaam, S; Seigel, K; Arens, E and Mozingo, L (2017) Climate co-benefits of green building standards: Water, waste and transportation. Building Research & Information, 45(8), pp. 828-844. ISSN 0961-3218

Fee, S T (2005) Sustainable construction practices: Contractors' perceptions of awareness and participation. PhD thesis, Indiana State University, USA.

Fernández-Sols, J L; Pathak, R; Lavy, S; Beltrán, L O; Son, K and Kim, K (2011) Framework for selecting performance assessment tools for achieving LEED 3.0 credits. Architectural Engineering and Design Management, 7(4), pp. 236-250. ISSN 1745-2007

Fortunato Iii, B R; Hallowell, M R; Behm, M and Dewlaney, K (2012) Identification of safety risks for high-performance sustainable construction projects. Journal of Construction Engineering and Management, 138(4), pp. 499-508. ISSN 0733-9364

Giles, C; Irizarry, J and Gheisari, M (2010) Does gender make a difference? An analysis of motivational factors in sustainability practice. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Gillis III, W L (2013) Development of an integrative commissioning methodology for new-building construction. PhD thesis, Missouri University of Science and Technology, USA.

Goh C S, R S (2013) The roles of sustainability assessment systems in delivering sustainable construction. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Graham, P (2000) Building education for the next industrial revolution: Teaching and learning environmental literacy for the building professions. Construction Management and Economics, 18(8), pp. 917-925. ISSN 01446193

Hagan, S K (2000) Gaining ground: The new contract between architecture and nature. PhD thesis, University of London, Birkbeck College, UK.

Hepner, C M and Boser, R A (2006) Architects' perceptions of LEED indoor environmental quality checklist items on employee productivity. International Journal of Construction Education and Research, 2(3), pp. 193-208. ISSN 1557-8771

Heron, E; Bowen, P and Lincoln, D (2005) Vandalism: A product of environmental design? Journal of Financial Management of Property and Construction, 10(3), pp. 181-191. ISSN 1366-4387

Huang, J; Abadi, M; Manu, P and Cheung, C (2022) The impact of sustainability rating systems on health and safety in building projects. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 176(2), pp. 49-64. ISSN 17514304

Huberty, L L (2013) Using leadership in energy and environmental design (LEED) certification to solicit sponsorships: A strategic framework for public sport facility marketers. PhD thesis, University of Minnesota, USA.

Humphreys, M A (2005) Quantifying occupant comfort: Are combined indices of the indoor environment practicable? Building Research & Information, 33(4), pp. 317-325. ISSN 0961-3218

Hussein, E S (2010) Green architecture as an approach for increasing energy efficiency in Egyptian buildings. PhD thesis, Cardiff University, UK.

Ismaeel, W S E (2019) Systems thinking and modeling for buildings' sustainable site selection. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Ismaeel, W S E (2022) Sustainable site selection using system dynamics; case study LEED-certified project. Architectural Engineering and Design Management, 18(4), pp. 368-386. ISSN 1745-2007

Ismaeel, W S E; Alamoudy, F O and Sameh, R (2023) How renovation activities may jeopardise indoor air quality: Accounting for short and long-term symptoms of sick building syndrome in educational buildings. Architectural Engineering and Design Management, 19(4), pp. 360-377. ISSN 1745-2007

Issa, M H; Attalla, M; Rankin, J H and Christian, A J (2011) Energy consumption in conventional, energyretrofitted and green LEED Toronto schools. Construction Management and Economics, 29(4), pp. 383-395. ISSN 1466433X

Karakhan, A A and Gambatese, J A (2017) Identification, quantification, and classification of potential safety risk for sustainable construction in the United States. Journal of Construction Engineering and Management, 143(7): 04017018, ISSN 0733-9364

Karakhan, A A and Gambatese, J A (2017) Integrating worker health and safety into sustainable design and construction: Designer and constructor perspectives. Journal of Construction Engineering and Management, 143(9): 04017069, ISSN 0733-9364

Khaemba, P (2013) Adoption of green building practices and rating system in Kenya: Potentials and barriers. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Kim, J; Hyun, J-Y; Chong, W K and Ariaratnam, S (2017) Understanding the effects of environmental factors on building energy efficiency designs and credits: Case studies using data mining and real-time data. Journal of Engineering, Design and Technology, 15(3), pp. 270-285.

Lapinski, A R; Horman, M J and Riley, D R (2006) Lean processes for sustainable project delivery. Journal of Construction Engineering and Management, 132(10), pp. 1083-1091. ISSN 0733-9364

Lawrence, R; Elsayed, M and Keime, C (2019) Evaluation of environmental design strategies for university buildings. Building Research & Information, 47(8), pp. 883-900. ISSN 0961-3218

Li, Q (2009) Energy efficiency design of residential buildings in North China cities. PhD thesis, Cardiff University, UK.

Li, Q; Syal, M; Turner, N and Arif, M (2013) Constructors and innovation credits in green building projects. Construction Innovation, 13(3), pp. 320-338. ISSN 1471-4175

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Liu, P (2025) Enhancing construction safety: Assessing training effectiveness using wearable sensing technology and optimizing work zone configuration through a behavioral approach. PhD thesis, University of Wyoming, USA.

Love, P E D; Niedzweicki, M; Bullen, P A and Edwards, D J (2012) Achieving the green building council of Australia's world leadership rating in an office building in perth. Journal of Construction Engineering and Management, 138(5), pp. 652-660. ISSN 0733-9364

Ma, J (2016) A data driven study on LEED credits and green building related implications in city planning. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Machado, M V; La Roche, P M; Mustieles, F and De Oteiza, I (2000) The fourth house: The design of a bioclimatic house in Venezuela. Building Research & Information, 28(3), pp. 196-211. ISSN 0961-3218

Magent, C S (2005) A process and competency-based approach to high performance building design. PhD thesis, Pennsylvania State University, USA.

Mah, D E (2011) Framework for rating the sustainability of the residential construction practice. PhD thesis, University of Alberta, Canada.

Mahdy, M M M (2014) Applying architecture simulation tools to assess building sustainable design: adapting the Egyptian residential energy code for climate change. PhD thesis, University of Kent, UK.

Mahmoud, S; Hussein, M; Zayed, T and Fahmy, M (2022) Multiobjective optimization model for the life cycle cost-sustainability trade-off problem of building upgrading using a generic sustainability assessment tool. Journal of Construction Engineering and Management, 148(7): 04022050, ISSN 0733-9364

Mellado, F; Wong, P F; Amano, K; Johnson, C and Lou, E C W (2020) Digitisation of existing buildings to support building assessment schemes: Viability of automated sustainability-led design scan-to-BIM process. Architectural Engineering and Design Management, 16(2), pp. 84-99. ISSN 1745-2007

Mourshed, M (2006) Interoperability-based optimisation of architectural design. PhD thesis, Loughborough University, UK.

Murtagh, N; Achkar, L and Roberts, A (2016) “The people that no-one notices”: The power of building control inspectors in sustainable construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Newsham, G R; Birt, B J; Arsenault, C; Thompson, A J L; Veitch, J A; Mancini, S; Galasiu, A D; Gover, B N; MacDonald, I A and Burns, G J (2013) Do green buildings have better indoor environments? New evidence. Building Research & Information, 41(4), pp. 415-434. ISSN 0961-3218

Ntshwene, K; Essah, E A and Dixon, T J (2014) Investigating the level of awareness of building assessment tools in the construction industry of Botswana. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Oates, D and Sullivan, K T (2012) Postoccupancy energy consumption survey of Arizona's LEED new construction population. Journal of Construction Engineering and Management, 138(6), pp. 742-750. ISSN 0733-9364

Ofori-Boadu, A N; Owusu-Manu, D G; Edwards, D J and Asiseh, F (2021) A conceptual model of subcontractor development practices for LEED projects. Engineering, Construction and Architectural Management, 28(4), pp. 1196-1213. ISSN 0969-9988

Onaran, B E (1996) The construction of professional identity in architecture and landscape architecture: Convictions about skills, knowledge, and professional roles in design. PhD thesis, University of Wisconsin - Madison, USA.

Ozcan, D G (2017) An analytic network process model to examine LEED-certified buildings' operational performance. Built Environment Project and Asset Management, 7(4), pp. 366-376. ISSN 2044-124X

Pivo, G (2008) Responsible property investment criteria developed using the Delphi method. Building Research & Information, 36(1), pp. 20-36. ISSN 0961-3218

Potbhare, V; Syal, M; Arif, M; Khalfan, M M A and Egbu, C (2009) Emergence of green building guidelines in developed countries and their impact on India. Journal of Engineering, Design and Technology, 7(1), pp. 99-121. ISSN 1726-0531

Rajendran, S (2007) Sustainable construction safety and health rating system. PhD thesis, Oregon State University, USA.

Rajendran, S; Gambatese, J A and Behm, M G (2009) Impact of green building design and construction on worker safety and health. Journal of Construction Engineering and Management, 135(10), pp. 1058-1066. ISSN 0733-9364

Reposa Jr, J H (2009) Comparison of usgbc LEED for homes and the nahb national green building program. International Journal of Construction Education and Research, 5(2), pp. 108-120. ISSN 1557-8771

Saraiva, T S (2020) Adaptation of the methodology SBTool for sustainability assessment of high school buildings in Portugal - SAHSBPT. PhD thesis, Universidade do Minho, Portugal.

Schoenefeldt, H (2019) The House of Commons: A precedent for post-occupancy evaluation. Building Research & Information, 47(6), pp. 635-665. ISSN 0961-3218

Scott, J R; Edge, M; Laing, R and Martin, P (2004) Optimising the relationship between passive solar design of new housing and the economics of construction and land value. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Shafique, F (2020) Transformational leadership for sustainability in architecture engineering and construction project teams. PhD thesis, Michigan State University, USA.

Shafique, F and Mollaoglu, S (2022) Shared transformational leadership for green architecture engineering and construction project teams: A study of LEED projects. Journal of Construction Engineering and Management, 148(12): 04022137, ISSN 0733-9364

Shari, Zalina (2011) Development of a sustainability assessment framework for Malaysian office buildings using a mixed-methods approach. PhD thesis, University of Adelaide, Australia.

Shepley, M M; Peditto, K; Sachs, N A; Pham, Y; Barankevich, R; Crouppen, G and Dresser, K (2022) Staff and resident perceptions of mental and behavioural health environments. Building Research & Information, 50(1-2), pp. 89-104. ISSN 0961-3218

Sheth, A; Price, A D F; Glass, J and Achour, N (2008) Reviewing the sustainability of existing healthcare facilities. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Short, C A and Al-Maiyah, S (2009) Design strategy for low-energy ventilation and cooling of hospitals. Building Research & Information, 37(3), pp. 264-292. ISSN 0961-3218

Short, C A; Cook, M and Lomas, K J (2009) Delivery and performance of a low-energy ventilation and cooling strategy. Building Research & Information, 37(1), pp. 1-30. ISSN 0961-3218

Short, C A and Lomas, K J (2007) Exploiting a hybrid environmental design strategy in a US continental climate. Building Research & Information, 35(2), pp. 119-143. ISSN 0961-3218

Son, K; Choi, K; Woods, P and Park, Y J (2012) Urban sustainability predictive model using GIS: Appraised land value versus LEED sustainable site credits. Journal of Construction Engineering and Management, 138(9), pp. 1107-1112. ISSN 0733-9364

Sterner, E (2002) Green procurement of buildings: Estimation of environmental impact and life-cycle cost. PhD thesis, Luleå University of Technology, Sweden.

Sullivan, K T and Oates, H D (2012) Analysis of Arizona's LEED for new construction population's credits. Journal of Construction Engineering and Management, 138(12), pp. 1386-1393. ISSN 0733-9364

Szydlik, C C (2014) Identifying and overcoming the barriers to sustainable construction. PhD thesis, Missouri University of Science and Technology, USA.

Thodelius, C (2018) Rethinking injury events: Explorations in spatial aspects and situational prevention strategies. PhD thesis, Chalmers University of Technology, Sweden.

Tseng, C-H (2006) Safety performance analyzer for constructed environments (SPACE). PhD thesis, Ohio State University, USA.

Ur Rehman, H S; Raza, M A; Masood, R; Khan, M A; Alamgir, S; Javed, M A; Roy, K and Lim, J B P (2023) A multi-facet BIM based approach for green building design of new multi-family residential building using LEED system. International Journal of Construction Management, 23(12), pp. 2024-2038. ISSN 1562-3599

Wallhagen, M and Glaumann, M (2011) Design consequences of differences in building assessment tools: A case study. Building Research & Information, 39(1), pp. 16-33. ISSN 0961-3218

Wang, J.; Dai, J.; Wang, X.; Gao, W.; Yao, X.; Dewancker, B. J. and Wang, Y. (2026) The role of health-oriented environmental design and personal attributes in promoting workplace healthy behaviours. Building Research & Information, 54(4), pp. 429-446. ISSN 0961-3218

Watson, S (2004) Improving the implementation of environmental strategies in the design of buildings: Towards a life-cycle based, front loaded, framework for building environmental assessment during design. PhD thesis, University of Queensland, Australia.

Wedding, G C (2008) Understanding sustainability in real estate: A focus on measuring and communicating success in green building. PhD thesis, University of North Carolina at Chapel Hill, USA.

Xia, B; Skitmore, M; Wu, P and Chen, Q (2014) How public owners communicate the sustainability requirements of green design-build projects. Journal of Construction Engineering and Management, 140(8): 04014036, ISSN 0733-9364

York, J G (2009) The entrepreneurial creation of public goods: Evidence from the green building and renewable energy industries. PhD thesis, University of Virginia, USA.

Zainul Abidin, N and Powmya, A (2025) Identifying barriers in constructing green buildings in Oman: A study on project contractors' experience. Built Environment Project and Asset Management, 15(1), pp. 67-84. ISSN 2044-124X

Zapata-Lancaster, G and Tweed, C (2016) Tools for low-energy building design: An exploratory study of the design process in action. Architectural Engineering and Design Management, 12(4), pp. 279-295. ISSN 1745-2007

Zarghami, S A and Ahmad, T (2026) Empirical evaluation of the LEED green building rating system: Exploring limitations through configurational analysis. Building Research & Information, 54(2), pp. 257-272. ISSN 0961-3218

Zhao, J; Lam, K P; Biswas, T and Wang, H (2015) An online platform to automate LEED energy performance evaluation and submission process. Construction Innovation, 15(3), pp. 313-332. ISSN 1471-4175

Zimmerman, A and Kibert, C J (2007) Forum: Informing LEED's next generation with the natural step. Building Research & Information, 35(6), pp. 681-689. ISSN 0961-3218

van Stijn, A (2023) Developing circular building components: Between ideal and feasible. PhD thesis, Delft University of Technology, Netherlands.