Items with Index Term: energy modelling

Abd-Elnaby, A-E H A and Reffat, R M (2024) Enhancing BIM-BEM integration: Solutions for efficient data exchange and energy performance assessment. Architectural Engineering and Design Management, 20(3), pp. 596-623. ISSN 1745-2007

Arida, M A (2024) Enhancing thermal comfort in commercial buildings: Contributions of machine learning algorithms for optimizing predictive thermal comfort indices. PhD thesis, North Carolina Agricultural and Technical State University, USA.

Aydın, D and Mıhlayanlar, E (2024) Determination of the significance of project delivery attributes (PDAs) on sustainable projects in Turkey. Journal of Engineering, Design and Technology, 22(5), pp. 1682-1703. ISSN 1726-0531

Bacon, M (2014) Occupancy analytics: A new basis for low-energy-low-carbon hospital design and operation in the UK. Architectural Engineering and Design Management, 10(1-2), pp. 146-163. ISSN 1745-2007

Bailey, O C (2008) Least-cost energy system design for commercial buildings: The relationship between end-use energy efficiency, distributed generation, and utility energy supply. PhD thesis, Cornell University, USA.

Brauner, M (2020) Developing an optimized sustainability assessment tool for building information modelling (BIM) systems: incorporation of hygrothermal modelling into BIM. PhD thesis, Auckland University of Technology, New Zealand.

Burgett, J M and Chini, A R (2013) Effective energy efficiency measures for existing residential homes in the Florida market. International Journal of Construction Education and Research, 9(1), pp. 61-80. ISSN 1557-8771

Cass, N (2018) Energy-related standards and UK speculative office development. Building Research & Information, 46(6), pp. 615-635. ISSN 0961-3218

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Chen, Yuxuan (2024) Investigation of faults in air-conditioning systems in commercial buildings: Occurrence, diagnostic validation, and energy impacts. PhD thesis, University of Nebraska - Lincoln, USA.

Doczy, R (2018) Risk-benefit analysis and optimization of LEED-certified school buildings design and construction: Statisitical and machine learning approaches. PhD thesis, Florida State University, USA.

Dong, H (2024) Impact of sensing and occupancy parameters to achieve comfort and demand side management in buildings. PhD thesis, Michigan State University, USA.

Dossick, C; Osburn, L and Neff, G (2025) Innovation through practice: The messy work of making technology useful for architecture, engineering and construction teams. Engineering, Construction and Architectural Management, 32(7), pp. 4887-4899. ISSN 0969-9988

Eslamirad, N; Malekpour Kolbadinejad, S; Mahdavinejad, M and Mehranrad, M (2020) Thermal comfort prediction by applying supervised machine learning in green sidewalks of Tehran. Smart and Sustainable Built Environment, 9(4), pp. 361-374. ISSN 2046-6099

Farzaneh, A (2019) Development of BIM-BEM framework to support the design process. DEng thesis, Ecole de Technologie Superieure, Canada.

Ferreira, A C F; Carmo, C S T; Cruz, A S and Faisca, R G (2025) A case study to explore the synergy between HBIM and BEM for maintenance of historical buildings. International Journal of Building Pathology and Adaptation, 43(3), pp. 302-320. ISSN 2398-4708

Gerrish, T; Ruikar, K; Cook, M; Johnson, M and Phillip, M (2017) Using BIM capabilities to improve existing building energy modelling practices. Engineering, Construction and Architectural Management, 24(2), pp. 190-208. ISSN 0969-9988

Gilbert, M; Barati, K and Shen, X (2025) Parametric analysis and optimisation of design elements impacting thermal loads in residential settings. Built Environment Project and Asset Management, 15(5), pp. 974-987. ISSN 2044-124X

González, J; Da Costa, B B F; Tam, V W Y and Haddad, A (2024) Effects of latitude and building orientation in indoor-illuminance levels towards energy efficiency. International Journal of Construction Management, 24(7), pp. 784-798. ISSN 1562-3599

Govertsen, K and Kane, M (2024) Measuring health inequities due to housing characteristics. Buildings & Cities, 5(1), pp. 451-469. ISSN 2632-6655

Gultekin-Bicer, P; Anumba, C J and Leicht, R M (2018) Advanced energy retrofit projects: Cross-case analysis of integrated system design. International Journal of Construction Management, 18(6), pp. 453-466. ISSN 1562-3599

Ham, Y (2015) Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Hamayat, F.; Ahmad, R. F.; Ghaban, W.; Saeed, F.; Ahmad, J.; Anwar, S. M. and Zubair, S. (2026) Data-driven stnet and stprophet models for secure edge-based indoor air temperature prediction in smart buildings. Building Research & Information, 54(4), pp. 492-509. ISSN 0961-3218

Holmes, S H; Phillips, T and Wilson, A (2016) Overheating and passive habitability: Indoor health and heat indices. Building Research & Information, 44(1), pp. 1-19. ISSN 0961-3218

Holmes, S H and Reinhart, C F (2013) Assessing future climate change and energy price scenarios: Institutional building investment. Building Research & Information, 41(2), pp. 209-222. ISSN 0961-3218

Ingle, A; Moezzi, M; Lutzenhiser, L and Diamond, R (2014) Better home energy audit modelling: Incorporating inhabitant behaviours. Building Research & Information, 42(4), pp. 409-421. ISSN 0961-3218

Jeong, W S (2014) Integrating building information modeling with object-oriented physical modeling for building thermal simulation. PhD thesis, Texas A&M University, USA.

Kamel Hedayat Abad, M E (2017) Integration and interoperability of building envelope information and energy modeling. PhD thesis, Pennsylvania State University, USA.

Li, F G N; Smith, A Z P; Biddulph, P; Hamilton, I G; Lowe, R; Mavrogianni, A; Oikonomou, E; Raslan, R; Stamp, S; Stone, A; Summerfield, A J; Veitch, D; Gori, V and Oreszczyn, T (2015) Solid-wall U-values: Heat flux measurements compared with standard assumptions. Building Research & Information, 43(2), pp. 238-252. ISSN 0961-3218

Liddiard, R (2014) Room-scale profiles of space use and electricity consumption in non-domestic buildings. Building Research & Information, 42(1), pp. 72-94. ISSN 0961-3218

Lu, Y; Scott, A; Kim, J; Curi, C B; McCarty, J; Pardy, A; Rysanek, A; Girling, C and Kellett, R (2021) Integration of an energy-economy model with an urban energy model. Buildings & Cities, 2(1), pp. 114-133. ISSN 2632-6655

Mirzabeigi, S (2024) Integrated building envelope assessment towards automation of energy retrofits: Drone-based data acquisition, automated thermal anomaly detection, and workflow development. PhD thesis, State University of New York College of Environmental Science and Forestry, USA.

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Nidhin, B K S N; Domingo, N; Bui, T T P and Wilkinson, S (2025) Construction stakeholders' knowledge on zero carbon initiatives in New Zealand. International Journal of Building Pathology and Adaptation, 43(3), pp. 512-527. ISSN 2398-4708

Nwagwu, C C; Akin, S and Hertwich, E G (2024) Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis. Buildings & Cities, 5(1), pp. 521-539. ISSN 2632-6655

Oliveira, S; Marco, E; Gething, B and Organ, S (2017) Evolutionary, not revolutionary: logics of early design energy modelling adoption in UK architecture practice. Architectural Engineering and Design Management, 13(3), pp. 168-184. ISSN 1745-2007

Outcault, S; Alston-Stepnitz, E; Sanguinetti, A; DePew, A N and Magaña, C (2022) Building lower-carbon affordable housing: Case studies from California. Building Research & Information, 50(6), pp. 646-661. ISSN 0961-3218

Petkov, I (2022) Optimal decarbonization conditions for buildings & districts: A model-based techno-economic perspective. DSc thesis, ETH Zürich, Switzerland.

Polson, D R (2020) Assessment of applications of optimisation to building design and energy modelling. PhD thesis, University of London, University College London, UK.

Ramalingam Rethnam, O and Thomas, A (2024) Urban building energy modelling-based framework to analyze the effectiveness of the community-wide implementation of national energy conservation codes. Smart and Sustainable Built Environment, 13(5), pp. 1213-1239. ISSN 2046-6099

Rana, M J; Hasan, M R; Sobuz, M H R and Sutan, N M (2021) Evaluation of passive design strategies to achieve nZEB in the corporate facilities: The context of bangladeshi subtropical monsoon climate. International Journal of Building Pathology and Adaptation, 39(4), pp. 619-654. ISSN 23984708

Shi, J (2017) A quantitative method for assessing home envelope's energy performance using measured data. International Journal of Construction Management, 17(2), pp. 89-99. ISSN 1562-3599

Sprau Coulter, T L (2014) Improving energy audit process and report outcomes through planning initiatives. PhD thesis, Pennsylvania State University, USA.

Srivastava, M (2020) Cooperative learning in design studios: A pedagogy for net-positive performance. Buildings & Cities, 1(1), pp. 594-609. ISSN 2632-6655

Steadman, P; Evans, S; Liddiard, R; Godoy-Shimizu, D; Ruyssevelt, P and Humphrey, D (2020) Building stock energy modelling in the UK: The 3DStock method and the London building stock model. Buildings & Cities, 1(1), pp. 100-119. ISSN 2632-6655

Taylor, S; Fan, D and Rylatt, M (2014) Enabling urban-scale energymodelling: A new spatial approach. Building Research & Information, 42(1), pp. 4-16. ISSN 0961-3218

Tomrukcu, G; Kizildag, H; Avgan, G; Dal, O; Ganic Saglam, N; Ozdemir, E and Ashrafian, T (2026) A systematic approach to manual calibration and validation of building energy simulation. Smart and Sustainable Built Environment, 15(1), pp. 203-230. ISSN 2046-6099

Weerasinghe, A S; Rasheed, E O and Rotimi, J O B (2021) A dilemma between building indoor environment preferences and occupant energy behaviours. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Xiong, Yunjie (2020) A BIM-based interoperability platform in support of building operation and energy management. PhD thesis, Virginia Tech, USA.

Yohanis, Y G and Norton, B (1998) Estimating at the earliest stages of design the financial cost and operational energy requirement of buildings. Journal of Financial Management of Property and Construction, 3(2), pp. 41-58. ISSN 1366-4387

Zaferanchi, M and Sozer, H (2024) Effectiveness of interventions to convert the energy consumption of an educational building to zero energy. International Journal of Building Pathology and Adaptation, 42(4), pp. 485-509. ISSN 23984708