Items with Index Term: durability

Abadou, Y; Kettab, R and Ghreib, A (2018) Experimental investigation on the carbonation properties of dune sand ceramic waste mortar. Journal of Engineering, Design and Technology, 16(3), pp. 501-516. ISSN 1726-0531

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO₂ emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abou Houraira, A; Ouali, A; Elhammoumi, O and Fekri, A (2023) Effect of accelerated aging by temperature and moisture variation cycles on the durability of concrete. International Journal of Building Pathology and Adaptation, 41(3), pp. 533-548. ISSN 23984708

Agyekum, K; Pittri, H; Botchway, E A and Dompey, A M A (2024) Key attributes of designers' competencies for design-for-deconstruction implementation. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(3), pp. 117-126. ISSN 17514304

Aikivuori, A (1996) Periods and demand for private sector housing refurbishment. Construction Management and Economics, 14(1), pp. 3-12. ISSN 01446193

Al-Bataineh, M T (2008) Scenario-based planning for tunnelling construction. PhD thesis, University of Alberta, Canada.

Al-Shaeer, H A Y; Irwan, J M; Alshalif, A; Amran, M; Alanazi, H; Tang, W C; Tang, L; Alhokabi, A and Alluqmani, A E (2026) Enhancing carbonation resistance of foamed concrete via microbial incorporation: A response surface methodology approach with aspergillus iizukae ean605 fungi. International Journal of Building Pathology and Adaptation, 44(1), pp. 266-294. ISSN 2398-4708

Al-Yami, A M and Price, A D F (2005) Exploring conceptual linkages between value engineering and sustainable construction. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

AlKheder, S; AlKandari, D and AlYatama, S (2022) Sustainable assessment criteria for airport runway material selection: A fuzzy analytical hierarchy approach. Engineering, Construction and Architectural Management, 29(8), pp. 3091-3113. ISSN 0969-9988

Alattyih, W H (2015) Value creation and risk assessment for green building design in Saudi Arabia. PhD thesis, University of Liverpool, UK.

Albano, L D (1992) An axiomatic approach to performance-based design. PhD thesis, Massachusetts Institute of Technology, USA.

Amran, M and Onaizi, A (2025) Sustainable admixtures to enhance long-term strength and durability properties of eco-concrete: An innovative use of Saudi agro-industrial by-products. International Journal of Building Pathology and Adaptation, 43(4), pp. 591-613. ISSN 2398-4708

Anh Tuan, B L; Tesfamariam, M G; Chen, Y Y; Hwang, C L; Lin, K L and Young, M P (2014) Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. Journal of Construction Engineering and Management, 140(5): 04014005, ISSN 0733-9364

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Arayamparambil, S. R.; Jha, K. N. and Singh, A. (2026) Development of a quality assessment scoring framework for residential buildings. International Journal of Building Pathology and Adaptation, 44(4), pp. 833-848. ISSN 2398-4708

Asadollahfardi, G; Katebi, A; Taherian, P and Panahandeh, A (2021) Environmental life cycle assessment of concrete with different mixed designs. International Journal of Construction Management, 21(7), pp. 665-676. ISSN 1562-3599

Asimakopoulou, E; Anumba, C J and Bouchlaghem, N M (2004) Emergency response management: A review of current approaches. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Bahammou, Y; Kouhila, M; Moussaoui, H; Lamsyehe, H; Tagnamas, Z; Lamharrar, A and Idlimam, A (2022) Evaluation of the influence of ambient air temperature and air velocity on mortar cement durability using a forced convection solar dryer. International Journal of Building Pathology and Adaptation, 40(4), pp. 462-480. ISSN 23984708

Bai, Y and Amirkhanian, S N (1994) Knowledge-based expert system for concrete mix design. Journal of Construction Engineering and Management, 120(2), pp. 357-373. ISSN 0733-9364

Basha, I M and Gab-Allah, A A (1991) Value engineering in Egyptian bridge construction. Journal of Construction Engineering and Management, 117(3), pp. 393-401. ISSN 0733-9364

Bogenstätter, U (2000) Prediction and optimization of life-cycle costs in early design. Building Research & Information, 28(5-6), pp. 376-386. ISSN 0961-3218

Bokor, O (2022) Improving labour productivity in construction. A hybrid machine learning approach. PhD thesis, University of Northumbria at Newcastle, UK.

Bordalo, R; De Brito, J; Gaspar, P L and Silva, A (2011) Service life prediction modelling of adhesive ceramic tiling systems. Building Research & Information, 39(1), pp. 66-78. ISSN 0961-3218

Borràs, J G; Mas, Á; Lerma, C; Vercher, J and Gil, E (2024) Separation layers and their influence on green roof water storage. Architectural Engineering and Design Management, 20(6), pp. 1629-1647. ISSN 1745-2007

Bradley, R A; Gohnert, M and Bulovic, I (2018) Construction considerations for low-cost earth brick shells. Journal of Construction in Developing Countries, 23(1), pp. 43-60. ISSN 1823-6499

Bubshait, A A; Tahir, B M and Jannadi, M O (1996) Use of microsilica in concrete construction. Building Research & Information, 24(1), pp. 41-49. ISSN 0961-3218

Cardellicchio, L (2020) Self-cleaning and colour-preserving efficiency of photocatalytic concrete: Case study of the jubilee church in rome. Building Research & Information, 48(2), pp. 160-179. ISSN 0961-3218

Cha, C (2024) New insights on the roman brick industry: The production and distribution of ceramic building material in central Italy (ca. 50 bce-300 CE). PhD thesis, Florida State University, USA.

Chabbi, R; Ferhoune, N and Bouabdallah, F (2023) Diagnostic of degraded reinforced concrete bridges explaining the environmental condition effect and reinforcement method. International Journal of Building Pathology and Adaptation, 41(4), pp. 825-848. ISSN 23984708

Chew, M Y L (2002) Resistance of polyurethane sealants to hot water. Building Research & Information, 30(5), pp. 367-371. ISSN 0961-3218

Chew, M Y L and De Silva, N (2003) Maintainability problems of wet areas in high-rise residential buildings. Building Research & Information, 31(1), pp. 60-69. ISSN 0961-3218

Chiadighikaobi, P C and Ubani-Wokoma, B C (2025) Suitability of basalt textile-reinforced granite–periwinkle shell concrete for sustainable construction in Nigeria. Construction Economics and Building, 25(1), pp. 171-202. ISSN 2204-9029

Conejos, S; Ubando, A and Lin Chew, M Y (2022) Design for maintainability tool for nano-façade coating applications on high-rise façades in the tropics. Built Environment Project and Asset Management, 12(1), pp. 70-95. ISSN 2044-124X

Craigen, A (1990) Britain's school building estate: evaluation by life cycle for effective maintenance, with an illustrated study on Glasgow schools. PhD thesis, University of Strathclyde, UK.

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Cruz Rios, F; Grau, D and Bilec, M (2021) Barriers and enablers to circular building design in the US: An empirical study. Journal of Construction Engineering and Management, 147(10): 04021117, ISSN 0733-9364

Cuciniello, G; Inzerillo, G; Corazziari, L; Ciampini, A; Degni, R; Torresi, M and Leandri, P (2023) Modeling the tire-pavement noise as a regression function of speed, mixture properties, and age of the layer. Journal of Construction Engineering and Management, 149(9): 04023080, ISSN 0733-9364

Dadi, G B (2013) Applying cognitive principles to the delivery of engineering information by different mediums. PhD thesis, University of Kentucky, USA.

Daniel, C and Neufville, E K (2025) An autogluon-enabled robust machine learning model for concrete tensile and compressive strength forecast. International Journal of Construction Management, 25(13), pp. 1636-1647. ISSN 1562-3599

Danso, H; Martinson, B; Ali, M and Mant, C (2015) Performance characteristics of enhanced soil blocks: A quantitative review. Building Research & Information, 43(2), pp. 253-262. ISSN 0961-3218

Dave, N; Sahu, V and Misra, A K (2020) Development of geopolymer cement concrete for highway infrastructure applications. Journal of Engineering, Design and Technology, 18(5), pp. 1321-1333. ISSN 1726-0531

De Araujo, V (2023) Timber construction as a multiple valuable sustainable alternative: Main characteristics, challenge remarks and affirmative actions. International Journal of Construction Management, 23(8), pp. 1334-1343. ISSN 1562-3599

Dias, J L; Silva, A; Chai, C; Gaspar, P L and De Brito, J (2014) Neural networks applied to service life prediction of exterior painted surfaces. Building Research & Information, 42(3), pp. 371-380. ISSN 0961-3218

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Ekenel, M (2004) Durability performance of advanced construction materials. PhD thesis, University of Missouri - Rolla, USA.

El-Haram, M A and Horner, R M W (2003) Application of the principles of ILS to the development of cost effective maintenance strategies for existing building stock. Construction Management and Economics, 21(3), pp. 283-296. ISSN 01446193

El-Mahdy, D and Ali, M (2024) Assessing the solar radiation performance of self-shaded 3D-printed clay-based façades. Architectural Engineering and Design Management, 20(2), pp. 249-268. ISSN 1745-2007

Eldin, N N and Senouci, A B (1992) Use of scrap tires in road construction. Journal of Construction Engineering and Management, 118(3), pp. 561-576. ISSN 0733-9364

Emmitt, S (2006) Selection and specification of building products: Implications for design managers. Architectural Engineering and Design Management, 2(3), pp. 176-186. ISSN 1745-2007

Esteves, I C A; Medeiros-Junior, R A and Medeiros, M H F (2018) NDT for bridges durability assessment on urban-industrial environment in Brazil. International Journal of Building Pathology and Adaptation, 36(5), pp. 500-515. ISSN 23984708

Ferraro, R M (2009) Materials for sustainable constructions. PhD thesis, University of Miami, USA.

Ferreira, C; Canhoto Neves, L; Silva, A and de Brito, J (2019) Stochastic Petri-net models to predict the degradation of ceramic claddings. Building Research & Information, 47(6), pp. 697-715. ISSN 0961-3218

Flint, M M (2014) A modular framework for performance-based durability engineering. PhD thesis, Stanford University, USA.

Folagbade, S O and Newlands, D M (2014) Suitability of cement combinations for carbonation resistance of structural concrete. Journal of Engineering, Design and Technology, 12(4), pp. 423-439.

Friedman, A and Cammalleri, V (1996) Advanced wood-frame construction details in Canada. Building Research & Information, 24(5), pp. 270-278. ISSN 0961-3218

Garcia Punhagui, Katia Regina (2014) Potential reducing of CO2 emissions and embodied energy in housing construction in Brazil by increasing the use of wood. PhD thesis, Universidade de São Paulo, Brazil.

Gaspar, P L and De Brito, J (2008) Service life estimation of cement-rendered facades. Building Research & Information, 36(1), pp. 44-55. ISSN 0961-3218

Gaur, S; Dosapati, S and Tawalare, A (2023) Stakeholder assessment in construction projects using a critic-TOPSIS approach. Built Environment Project and Asset Management, 13(2), pp. 217-237. ISSN 2044-124X

George, M and Sekpe, V (2010) Inspection of insulated concrete form walls using ground penetrating radar. International Journal of Construction Education and Research, 6(4), pp. 303-317. ISSN 1557-8771

Glass, J (2012) The state of sustainability reporting in the construction sector. Smart and Sustainable Built Environment, 1(1), pp. 87-104. ISSN 2046-6099

Gohardani, N (2014) An approach towards sustainable building. PhD thesis, KTH Royal Institute of Technology, Sweden.

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Grant, A and Ries, R (2013) Impact of building service life models on life cycle assessment. Building Research & Information, 41(2), pp. 168-186. ISSN 0961-3218

Grant, E (2013) "Pack 'em, rack 'em and stack 'em": The appropriateness of the use and reuse of shipping containers for prison accommodation. Construction Economics and Building, 13(2), pp. 35-44. ISSN 2204-9029

Greene, I; Lokuge, W and Karunasena, W (2020) Structural design of floodways under extreme flood loading. International Journal of Disaster Resilience in the Built Environment, 11(4), pp. 535-555. ISSN 1759-5916

Gurgun, A P and Koc, K (2020) Contractor prequalification for green buildings: Evidence from Turkey. Engineering, Construction and Architectural Management, 27(6), pp. 1377-1400. ISSN 0969-9988

Hadizadeh-Bazaz, M.; Navarro, I. J. and Yepes, V. (2026) Smart integration of non-destructive damage detection and life-cycle assessment for sustainable maintenance of coastal bridges. Smart and Sustainable Built Environment, pp. 1-27. ISSN 2046-6099

Hagan, E B (1997) The use of stabilized soil to enhance rural housing. Building Research & Information, 25(4), pp. 210-217. ISSN 0961-3218

Hassler, U and Kohler, N (2014) The ideal of resilient systems and questions of continuity. Building Research & Information, 42(2), pp. 158-167. ISSN 0961-3218

Hofsteede, Iraina (2019) The influence of leadership competencies on the outcome of tendering projects. PhD thesis, RMIT University, Australia.

Hou, S (2015) An ontology-based holistic approach for multi-objective sustainable structural design. PhD thesis, Cardiff University, UK.

Hulathdoowage, N D and Hadiwattage, C (2022) Applicability of drywall technologies for disaster-induced housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 13(4), pp. 498-515. ISSN 1759-5916

Jackson, S (2002) Development of a tool for whole life design appraisal. In: Greenwood, D (ed.) Proceedings of 18th Annual ARCOM Conference, 2-4 September 2002, Northumbria, UK.

Jalaei, F; Zhang, J; McNeil- Ayuk, N and McLeod, C (2025) Environmental life cycle assessment (LCA) for design of climate-resilient bridges-a comprehensive review and a case study. International Journal of Construction Management, 25(1), pp. 99-114. ISSN 1562-3599

Jalaei, F; Zhang, J; McNeil- Ayuk, N and McLeod, C (2025) Environmental life cycle assessment (LCA) for design of climate-resilient bridges: A comprehensive review and a case study. International Journal of Construction Management, 25(1), pp. 99-114. ISSN 1562-3599

Jang, W S (2007) Embedded system for construction material tracking using combination of radio frequency and ultrasound signal. PhD thesis, University of Maryland, College Park, USA.

Jemal, K. M.; Aibinu, A. and Oraee, M. (2026) Technological enablers of lighting-as-a-service business model for circular lighting: A qualitative study. Smart and Sustainable Built Environment, pp. 1-23. ISSN 2046-6099

Joseph Oladiran, O and Rogers Simeon, D (2023) Consciousness and prospects of autoclaved aerated concrete (aac) blocks for wall construction: Comparative study Nigeria and South Africa. Journal of Construction Business and Management, 6(2), pp. 1-10. ISSN 2521-0165

Kaminsky, J (2015) The fourth pillar of infrastructure sustainability: Tailoring civil infrastructure to social context. Construction Management and Economics, 33(4), pp. 299-309. ISSN 01446193

Karri, S K; Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(1), pp. 42-59. ISSN 1726-0531

Kerali, A G and Thomas, T H (2002) Effect of mix retention and curing on low-cement walling blocks. Building Research & Information, 30(5), pp. 362-366. ISSN 0961-3218

Kerali, A G and Thomas, T H (2004) Simple durability test for cement stabilized blocks. Building Research & Information, 32(2), pp. 140-145. ISSN 0961-3218

Keskin, F S (2021) Integration of lifecycle assessment into structural intervention scenarios for assessing environmental impacts of vulnerable buildings. PhD thesis, University of Birmingham, UK.

Kouhila, M; Bahammou, Y; Lamsyehe, H; Tagnamas, Z; Moussaoui, H; Idlimam, A and Lamharrar, A (2024) Evaluating water sorption isotherms, drying kinetics and exergy performance of traditionally earth mortar drying system based on hybrid solar-electrical dryer. International Journal of Building Pathology and Adaptation, 42(5), pp. 857-880. ISSN 2398-4708

Kulshreshtha, Y (2022) Building affordable, durable and desirable earthen houses: Construction with materials derived from locally available natural and biological resources. PhD thesis, Delft University of Technology, Netherlands.

Kurokawa, M; Schweber, L and Hughes, W P (2017) Client engagement and building design: The view from actor-network theory. Building Research & Information, 45(8), pp. 910-925. ISSN 0961-3218

Lacasse, M A (1999) Materials and technology for sustainable construction. Building Research & Information, 27(6), pp. 405-408. ISSN 0961-3218

Lee, J S (2018) Value engineering for defect prevention on building façade. Journal of Construction Engineering and Management, 144(8): 04018069, ISSN 0733-9364

Li, C Q (1997) Deterioration of concrete building structures. Building Research & Information, 25(4), pp. 196-201. ISSN 0961-3218

Li, M (2024) Dfma-oriented rebar design optimization for reinforced concrete structures using graph neural network. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Lisø, K R; Kvande, T and Thue, J V (2005) High-performance weather-protective flashings. Building Research & Information, 33(1), pp. 41-54. ISSN 0961-3218

Liu, Y.; Schmidt, S.; Li, H. and Cao, Y. (2026) A study on the moisture risk assessment path for exterior wall of existing residential building in Shanghai based on hygrothermal simulation analysis. Architectural Engineering and Design Management, 22(2), pp. 340-364. ISSN 1745-2007

Liu, D; Sun, J; Zhong, D and Song, L (2012) Compaction quality control of earth-rock dam construction using real-time field operation data. Journal of Construction Engineering and Management, 138(9), pp. 1085-1094. ISSN 0733-9364

Lombardi Filho, Pedro (2022) Management of small volumes of asbestos-cement materials in Brazil: From use to waste. PhD thesis, Universidade de São Paulo, Brazil.

Lovrenčić Butković, L; Mihić, M and Sigmund, Z (2023) Assessment methods for evaluating circular economy projects in construction: A review of available tools. International Journal of Construction Management, 23(5), pp. 877-886. ISSN 1562-3599

Macdonald, S and Arato Goncalves, A P (2020) Concrete conservation: Outstanding challenges and potential ways forward. International Journal of Building Pathology and Adaptation, 38(4), pp. 607-618. ISSN 23984708

Maia, M E; Nogueira Silva, F A; Nascimento, N P d S; Azevedo, A and Delgado, J M P Q (2025) Effect of alkali-silica reaction on the mechanical properties of concrete with and without pozzolan. International Journal of Building Pathology and Adaptation, 43(8), pp. 124-139. ISSN 2398-4708

Makrigeorgis, C N (1991) Development of an optimal durability-based highway cost allocation model. PhD thesis, Texas A&M University, USA.

Marciano, E J (2003) Sustainable development and the cement and concrete industries. PhD thesis, Universite de Sherbrooke, Canada.

Martabid, J E and Mourgues, C (2015) Criteria used for selecting envelope wall systems in Chilean residential projects. Journal of Construction Engineering and Management, 141(12): 05015011, ISSN 0733-9364

Marteinsson, B (2003) Durability and the factor method of ISO 15686-1. Building Research & Information, 31(6), pp. 416-426. ISSN 0961-3218

Martínez Fernández, P; Villalba Sanchís, I; Insa Franco, R and Yepes, V (2022) Slab track optimization using metamodels to improve rail construction sustainability. Journal of Construction Engineering and Management, 148(7): 04022053, ISSN 0733-9364

Massoudi, A R (1995) Utilization of plant condition monitoring with reference to the Iranian construction industry. PhD thesis, Swansea University, UK.

Mohamed, M (2022) A risk-based model for construction inspection in highways. PhD thesis, University of Kansas, USA.

Mohammed, A W (2016) Agent-based modeling of abc methods for decisionmaking in highway bridge projects including uncertainty and several stakeholders. PhD thesis, Western Michigan University, USA.

Moncaster, A; Malmqvist, T; Forman, T; Pomponi, F and Anderson, J (2022) Embodied carbon of concrete in buildings, Part 2: Are the messages accurate? Buildings & Cities, 3(1), pp. 334-355. ISSN 2632-6655

Moodi, F and Knapton, J (2003) Research into a management system for diagnosis, maintenance, and repair of concrete structures. Journal of Construction Engineering and Management, 129(5), pp. 555-561. ISSN 0733-9364

Morgado, J; Flores-Colen, I; De Brito, J and Silva, A (2017) Maintenance planning of pitched roofs in current buildings. Journal of Construction Engineering and Management, 143(7): 05017010, ISSN 0733-9364

Muguda, S; Hughes, P N; Augarde, C E; Perlot, C; Walter Bruno, A and Gallipoli, D (2022) Cross-linking of biopolymers for stabilizing earthen construction materials. Building Research & Information, 50(5), pp. 502-514. ISSN 0961-3218

Murtagh, N; Roberts, A and Hind, R (2016) The relationship between motivations of architectural designers and environmentally sustainable construction design. Construction Management and Economics, 34(1), pp. 61-75. ISSN 01446193

Nam, C H and Tatum, C B (1988) Major characteristics of constructed products and resulting limitations of construction technology. Construction Management and Economics, 6(2), pp. 133-147. ISSN 01446193

Nikmehr, B; Kafle, B and Al-Ameri, R (2024) Developing a sustainable self-compacting geopolymer concrete with 100% geopolymer-coated recycled concrete aggregate replacement. Smart and Sustainable Built Environment, 13(2), pp. 395-424. ISSN 2046-6099

Nilsson, S (2003) Durability of district heating pipes. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Niveditha, M. and Palanisamy, T. (2026) Upcycling iron-rich industrial waste into a carbon-sequestering composite binder through optimized carbonation curing for structural applications. International Journal of Construction Management, 26(8), pp. 1471-1489. ISSN 1562-3599

Nnaji, C; Gambatese, J; Karakhan, A and Eseonu, C (2019) Influential safety technology adoption predictors in construction. Engineering, Construction and Architectural Management, 26(11), pp. 2655-2681. ISSN 0969-9988

Nordby, A S; Berge, B; Hakonsen, F and Hestnes, A G (2009) Criteria for salvageability: The reuse of bricks. Building Research & Information, 37(1), pp. 55-67. ISSN 0961-3218

Obasi, S N N; Pemberton, J and Awe, O O (2025) A comparative study of soil classification machine learning models for construction management. International Journal of Construction Management, 25(5), pp. 584-593. ISSN 1562-3599

Obonyo, E (2012) Developing enhanced, lignocellulosic fibre reinforcement for low-cost, cementitious, construction materials. Architectural Engineering and Design Management, 8(1), pp. 30-41. ISSN 1745-2007

Oechler, E; Molenaar, K R; Hallowell, M and Scott, S (2018) State-of-practice for risk-based quality assurance in state departments of transportation. Engineering, Construction and Architectural Management, 25(7), pp. 958-970. ISSN 0969-9988

Ofori-Boadu, A N; Abrokwah, R Y; Gbewonyo, S and Fini, E (2018) Effect of swine-waste bio-char on the water absorption characteristics of cement pastes. International Journal of Building Pathology and Adaptation, 36(3), pp. 283-299. ISSN 23984708

Osei-Tutu, S; Ayarkwa, J; Nani, G; Osei-Asibey, D and Abu, I M A (2025) Stakeholders' role towards circular economy implementation: A scientometric review. Construction Innovation, 25(6), pp. 1633-1656. ISSN 1471-4175

Patterson, M R (2017) Skin fit and retrofit: Challenging the sustainability of curtainwall practice in tall buildings. PhD thesis, University of Southern California, USA.

Paula, Nathalia de (2016) The management of design firms and the environmental sustainability of buildings. PhD thesis, Universidade de São Paulo, Brazil.

Paula, Nathália de (2016) Design firms management and environmental sustainability of buildings. PhD thesis, Universidade de São Paulo, Brazil.

Phillips, R E (2020) Occupant centric dynamic modeling of sustainability analyses in buildings. PhD thesis, Northeastern University, USA.

Platt, R T (1998) Development of a ready-to-assemble construction system. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Pons, O; Casanovas-Rubio, M M; Armengou, J and De La Fuente, A (2021) Sustainability-driven decision-making model: Case study of fiber-reinforced concrete foundation piles. Journal of Construction Engineering and Management, 147(10): 04021116, ISSN 0733-9364

Pridmore, A B (2009) Development of composite renewal systems for rapid rehabilitation and construction of bridge decks. PhD thesis, University of California, San Diego, USA.

Prieto, A J; Silva, A; de Brito, J and Macias-Bernal, J M (2018) Serviceability of facade claddings. Building Research & Information, 46(2), pp. 179-12. ISSN 0961-3218

Quanjel, E M C J (2013) Collaborative design support: workshops to stimulate interaction and knowledge exchange between practitioners. PhD thesis, Eindhoven University of Technology, Netherlands.

Raheem, A A; Falola, O O and Adeyeye, K J (2012) Production and testing of lateritic interlocking blocks. Journal of Construction in Developing Countries, 17(1), pp. 35-50. ISSN 1823-6499

Rajagopalan, G (2019) Durability of alumina silicate concrete based on slag/fly ash blends against corrosion. Engineering, Construction and Architectural Management, 26(8), pp. 1641-1651. ISSN 0969-9988

Rasmussen, F. N.; Birkved, M. and Birgisdóttir, H. (2020) Low-carbon design strategies for new residential buildings: Lessons from architectural practice. Architectural Engineering and Design Management, 16(5), pp. 374-390. ISSN 1745-2007

Rasmussen, F N; Birkved, M and Birgisdóttir, H (2020) Low- carbon design strategies for new residential buildings: lessons from architectural practice. Architectural Engineering and Design Management, 16(5), pp. 374-390. ISSN 1745-2007

Raymond, A J; Kendall, A; Dejong, J T; Kavazanjian, E; Woolley, M A and Martin, K K (2021) Life cycle sustainability assessment of fugitive dust control methods. Journal of Construction Engineering and Management, 147(3): 04020181, ISSN 0733-9364

Rezaei, Mohammad (2019) Characterizing controlled low-strength materials (CLSM) for narrow-trench reinstatement. PhD thesis, University of Alberta, Canada.

Rosa, Fabiana Pires (2021) Proposal for a management model for the building maintenance phase, using the BIM concept, focusing on preventive maintenance. PhD thesis, Universidade do Vale do Rio dos Sinos, Brazil.

Sachchithananthan, M and Thayaparan, M (2025) A framework to select suitable sustainable materials for high-rise buildings in Sri Lanka. International Journal of Construction Management, 25(9), pp. 1072-1086. ISSN 1562-3599

Samarasinghe, D A S (2014) Building materials supply chains: An evaluative study of the New Zealand residential construction. PhD thesis, Auckland University of Technology, New Zealand.

Sangiorgio, Valentino (2019) Development of a decision support system for the structural degradation analysis of RC buildings supported by user-reported data and modern information technologies. PhD thesis, Politecnico di Bari, Italy.

Sassi, P (2008) Defining closed-loop material cycle construction. Building Research & Information, 36(5), pp. 509-519. ISSN 0961-3218

Shehadeh, A; Alshboul, O and Tamimi, M (2025) Quantitative analysis of climate-adaptive pavement technologies: Mitigating environmental impact and enhancing economic viability in urban infrastructure. Journal of Construction Engineering and Management, 151(6): 04025064, ISSN 0733-9364

Shekhawat, P; Sharma, G and Singh, R M (2020) Durability analysis of eggshell powder–flyash geopolymer composite subjected to wetting–drying cycles. Journal of Engineering, Design and Technology, 18(6), pp. 2043-2060. ISSN 1726-0531

Shohet, I M and Paciuk, M (2004) Service life prediction of exterior cladding components under standard conditions. Construction Management and Economics, 22(10), pp. 1081-1090. ISSN 01446193

Shohet, I M and Paciuk, M (2006) Service life prediction of exterior cladding components under failure conditions. Construction Management and Economics, 24(2), pp. 131-148. ISSN 01446193

Shohet, I M and Puterman, M (2004) Flat roofing systems: Towards integrated techno-economic analysis. Building Research & Information, 32(2), pp. 165-173. ISSN 0961-3218

Sijakovic, M; Peric, A and Ayuso Ollero, P (2021) Towards resilient design of the building asset: The BREEAM-based evaluation of the z hotel holborn, London. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 85-100. ISSN 1759-5916

Silva, A; Dias, J L; Gaspar, P L and De Brito, J (2011) Service life prediction models for exterior stone cladding. Building Research & Information, 39(6), pp. 637-653. ISSN 0961-3218

Silva, A; Neves, L C; Gaspar, P L and de Brito, J (2016) Probabilistic transition of condition: Render facades. Building Research & Information, 44(3), pp. 301-318. ISSN 0961-3218

Singer, H and Özşahin, Ş (2022) Prioritization of laminate flooring selection criteria from experts' perspectives: A spherical fuzzy AHP-based model. Architectural Engineering and Design Management, 18(6), pp. 911-926. ISSN 1745-2007

Sirin, O; Gunduz, M and Shamiyeh, M E (2021) Application of analytic hierarchy process (AHP) for sustainable pavement performance management in qatar. Engineering, Construction and Architectural Management, 28(10), pp. 3106-3122. ISSN 0969-9988

Sohail, M G; Salih, M; Al Nuaimi, N and Kahraman, R (2019) Corrosion performance of mild steel and epoxy coated rebar in concrete under simulated harsh environment. International Journal of Building Pathology and Adaptation, 37(5), pp. 657-678. ISSN 23984708

Staffa Junior, L B; Bastos Costa, D; Torres Nogueira, J L and Silva, A S (2025) Web platform for building roof maintenance inspection using uas and artificial intelligence. International Journal of Building Pathology and Adaptation, 43(1), pp. 4-28. ISSN 2398-4708

Stewart, J H (2024) The plastics crisis: Responsible recycling in civil engineering and infrastructure. PhD thesis, Mississippi State University, USA.

Suleiman, M Z; Talib, R and Ramli, M (2013) Durability and flexibility characteristics of latex modified ferrocement in structural development applications. Journal of Engineering, Design and Technology, 11(1), pp. 59-70. ISSN 1726-0531

Tambwe, O.; Aigbavboa, C. and Akinradewo, O. (2026) Influence of data longevity on data management in the South African construction industry. Construction Economics and Building, 26(2), ISSN 2204-9029

Tanaka, M (2008) Essays on durability and the Japanese housing market. PhD thesis, Johns Hopkins University, USA.

Thiruvenghadam, T S and Prakash, A (2025) Emerging paradigms and practices in construction equipment management. Journal of Construction Engineering and Management, 151(5): 03125003, ISSN 0733-9364

Thoradeniya, D; Jayasinghe, C; Ariyaratne, I E and Basnayake, G B M A (2026) Construction quality framework for school buildings: Damage detection and rectification prioritization. International Journal of Construction Management, 26(4), pp. 660-678. ISSN 1562-3599

Tino Balestra, C E; Alessi Reichert, T; Savaris, G; Pansera, W A and Medeiros-Junior, R A (2020) Nondestructive method for estimation of chloride profiles: Correlation between electrical resistivity and holliday-empirical equation. Journal of Construction Engineering and Management, 146(10): 04020119, ISSN 0733-9364

Troive, S (1998) Structural LCC design of concrete bridges. DrTech thesis, Kungliga Tekniska Hogskolan, Sweden.

Ugwu, O O; Arop, J B; Nwoji, C U and Osadebe, N N (2013) Nanotechnology as a preventive engineering solution to highway infrastructure failures. Journal of Construction Engineering and Management, 139(8), pp. 987-993. ISSN 0733-9364

Uniacke, H (2001) Design of a low cost ventilated photovoltaic cladding. PhD thesis, Cardiff University, UK.

Vahidi, A (2025) Towards circular concrete: The implementation of circular concrete in the construction industry. PhD thesis, Delft University of Technology, Netherlands.

Ventura, M; S. Dias, I; Flores-Colen, I and Silva, A (2023) Pathology and proactive maintenance of floor finishes. International Journal of Building Pathology and Adaptation, 41(3), pp. 588-605. ISSN 23984708

Vinodh, S and Sharath, K T (2016) A case study on applying creative design concepts to brake rotor design. Journal of Engineering, Design and Technology, 14(1), pp. 2-16.

Volpintesta, Francesco (2024) New eco-sustainable construction materials derived from industrial wastes. PhD thesis, Università degli Studi di Camerino, Italy.

Wang, X; South, A and Farnsworth, C (2024) Using grounded theory analysis in construction management and civil engineering education: Integrating perspectives to shape a comprehensive view of sustainability. International Journal of Construction Education and Research, 20(4), pp. 501-522. ISSN 1557-8771

Wilson, J G and Gupta, N K (1996) Assessment of structure formation in fresh concrete by measurement of its electrical resistance. Building Research & Information, 24(4), pp. 209-212. ISSN 0961-3218

Wright, P H (1989) Key factors for the evaluation of the quality of rural shelter structures. EdD thesis, West Virginia University, USA.

Yao, Y P; Ruan, Y Z; Chen, J; Geng, Y; Zhang, X; Liu, B Y; Zong, X P and Yu, G Z (2018) Research on a real-time monitoring platform for compaction of high embankment in airport engineering. Journal of Construction Engineering and Management, 144(1): 04017096, ISSN 0733-9364

Yatmo, Y A; Atmodiwirjo, P; Saginatari, D P and Harahap, M M Y (2021) Development of modular school design as a permanent solution for post-disaster reconstruction in Indonesia. International Journal of Disaster Resilience in the Built Environment, 12(1), pp. 101-113. ISSN 1759-5916

Yazdani Mehr, S and Wilkinson, S (2018) Technical issues and energy efficient adaptive reuse of heritage listed city halls in Queensland Australia. International Journal of Building Pathology and Adaptation, 36(5), pp. 529-542. ISSN 23984708

Yildiz, S and Güneş, S (2026) Establishing a model for the selection of building materials: An application for roof coverings. International Journal of Construction Management, 26(4), pp. 718-733. ISSN 1562-3599

Yin, X (2018) Development of straw bale building in northern China. PhD thesis, University of Bath, UK.

Zhao, J (2020) Towards a proactive real-time data-driven musculoskeletal disorders prevention approach in construction. PhD thesis, Pennsylvania State University, USA.

Zhu, Y; Brigham, J C and Fascetti, A (2025) Lidar-rgb data fusion for four-dimensional uav-based monitoring of reinforced concrete bridge construction: Case study of the fern hollow bridge reconstruction. Journal of Construction Engineering and Management, 151(1): 05024016, ISSN 0733-9364