Items with Index Term: density

Abobakr, H; Raji, M; Essabir, H; Bensalah, M O; Bouhfid, R and Qaiss, A E K (2025) Sustainable acoustic insulation in nonstructural concrete: Enhancing performance with ground tire rubber. Journal of Construction Engineering and Management, 151(10): 04025147, ISSN 0733-9364

Abotaleb, I S and El-Adaway, I H (2017) Construction bidding markup estimation using a multistage decision theory approach. Journal of Construction Engineering and Management, 143(1): 04016079, ISSN 0733-9364

Abourizk, S M and Halpin, D W (1992) Statistical properties of construction duration data. Journal of Construction Engineering and Management, 118(3), pp. 525-544. ISSN 0733-9364

Abourizk, S M; Halpin, D W and Wilson, J R (1991) Visual interactive fitting of beta distributions. Journal of Construction Engineering and Management, 117(4), pp. 589-605. ISSN 0733-9364

Abubakri, S; Mangat, P S; Grigoriadis, K and Starinieri, V (2025) Pore properties and moisture loss of repair mortars under low-impact microwave curing. International Journal of Building Pathology and Adaptation, 43(4), pp. 749-765. ISSN 2398-4708

Adekanye, O G (2019) Evaluation of building policies, programs, and potential for energy efficiency in the United States. PhD thesis, Carnegie Mellon University, USA.

Adzande, P; Gyuse, T T and Atser, J (2018) Correlates of crime in urban Makurdi, Nigeria. African Journal of Built Environment Research, 2(1), pp. 21-40. ISSN 2414-0236

Ahmadi, M; Ahmadi, A and Yousefi, S (2025) Human behavior and decision-making in earthquake emergencies: Insights from virtual reality and serious games. International Journal of Construction Management, 25(11), pp. 1254-1272. ISSN 1562-3599

Al-Biqami, N M (2001) Virtual procurement system for virtual enterprises. PhD thesis, University of Nottingham, UK.

Al-Shaeer, H A Y; Irwan, J M; Alshalif, A; Amran, M; Alanazi, H; Tang, W C; Tang, L; Alhokabi, A and Alluqmani, A E (2026) Enhancing carbonation resistance of foamed concrete via microbial incorporation: A response surface methodology approach with aspergillus iizukae ean605 fungi. International Journal of Building Pathology and Adaptation, 44(1), pp. 266-294. ISSN 2398-4708

Al-Sudairi, A A and Al-Motairi, M S (2010) Multi objective land use allocation model using priority-based goal programming technique. Construction Management and Economics, 28(2), pp. 151-161. ISSN 1466433X

Ali Khan, M S; Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(1), pp. 196-210.

Allenby, V R (1986) Cost models for engineering services. PhD thesis, Aston University, UK.

Allison, L and Kaminsky, J (2017) Safety communication networks: Females in small work crews. Journal of Construction Engineering and Management, 143(8): 04017050, ISSN 0733-9364

Alongi, A; Angelotti, A; Rizzo, A and Zanelli, A (2021) Measuring the thermal resistance of double and triple layer pneumatic cushions for textile architectures. Architectural Engineering and Design Management, 17(3-4), pp. 334-346. ISSN 1745-2007

Alsamadani, R; Hallowell, M and Javernick-Will, A N (2013) Measuring and modelling safety communication in small work crews in the US using social network analysis. Construction Management and Economics, 31(6), pp. 568-579. ISSN 1466433X

Anagnostopoulos, I (2018) Generating as-is BIMs of existing buildings: from planar segments to spaces. PhD thesis, University of Cambridge, UK.

Angel, S; Lamson-Hall, P and Blanco, Z G (2021) Anatomy of density: Measurable factors that constitute urban density. Buildings & Cities, 2(1), pp. 264-282. ISSN 2632-6655

Anh Tuan, B L; Tesfamariam, M G; Chen, Y Y; Hwang, C L; Lin, K L and Young, M P (2014) Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. Journal of Construction Engineering and Management, 140(5): 04014005, ISSN 0733-9364

Anike, E E; Saidani, M; Ganjian, E; Tyrer, M and Olubanwo, A O (2019) The potency of recycled aggregate in new concrete: a review. Construction Innovation, 19(4), pp. 594-613. ISSN 1471-4175

Anjaneyappa, V; Amarnath, M S and Srinivasamurthy, B R (2014) Compacting characteristics of light compacting equipment. Journal of Construction Engineering and Management, 140(5): 04014003, ISSN 0733-9364

Ariyachandra, M F (2021) Automating the generation of geometric information models to support digital twinning of existing rail infrastructure. PhD thesis, University of Cambridge, UK.

Armitage, P; Godoy-Shimizu, D; Steemers, K and Chenvidyakarn, T (2015) Using display energy certificates to quantify public sector office energy consumption. Building Research & Information, 43(6), pp. 691-709. ISSN 0961-3218

Arpaci, E Y G; Akbulut, D E and Yildiz, O (2024) Enhancing water resistance of earthen buildings by using admixture materials. Architectural Engineering and Design Management, 20(2), pp. 320-336. ISSN 1745-2007

Asiedu, R O (2017) Using lateritic gravel as all-in aggregate for concrete production. Journal of Engineering, Design and Technology, 15(3), pp. 305-316.

Aslani, F; Amini Hosseini, K and Fallahi, A (2020) A framework for earthquake resilience at neighborhood level. International Journal of Disaster Resilience in the Built Environment, 11(4), pp. 557-575. ISSN 1759-5916

Auradkar, P K; Raykar, A; Agarwal, I; Sitaram, D and Manavalan R (2022) Accuracy assessment and performance analysis of raster to vector conversions on lulc data: India. Journal of Engineering, Design and Technology, 20(6), pp. 1787-1809. ISSN 1726-0531

Ayodele, O L; Sanusi, K O and Kahn, M T (2019) Nuclear battery: a source of environmentally friendly energy. Journal of Engineering, Design and Technology, 17(1), pp. 172-182. ISSN 1726-0531

Azman, M A (2016) Bidding competitiveness: A comparative analysis of different bid auctions in Malaysia. Journal of Engineering, Design and Technology, 14(4), pp. 678-698.

Back, W E; Boles, W W and Fry, G T (2000) Defining triangular probability distributions from historical cost data. Journal of Construction Engineering and Management, 126(1), pp. 29-37. ISSN 0733-9364

Badi, S and Diamantidou, D (2017) A social network perspective of building information modelling in Greek construction projects. Architectural Engineering and Design Management, 13(6), pp. 406-422. ISSN 1745-2007

Bahmani, H; Ao, Y; Yang, D; Wang, D; Li, M; Long, Y and Peng, P (2025) Implications for improving evacuation safety in primary school corridors: A video-based analysis on evacuees' speed and density. Engineering, Construction and Architectural Management, 32(12), pp. 8472-8493. ISSN 0969-9988

Bai, Y and Amirkhanian, S N (1994) Knowledge-based expert system for concrete mix design. Journal of Construction Engineering and Management, 120(2), pp. 357-373. ISSN 0733-9364

Ballesteros-Pérez, P and Skitmore, M (2017) On the distribution of bids for construction contract auctions. Construction Management and Economics, 35(3), pp. 106-121. ISSN 01446193

Barai, N and Faruk, M (2025) Analyzing physical environment of child friendly spaces in emergencies: In the context of rohingya crisis at cox's bazar, Bangladesh. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 224-241. ISSN 1759-5908

Barros de Oliveira, N R (2013) A theory of coordination voids in dynamic inter-organisational relationships: a study of social housing projects in England. PhD thesis, London School of Economics and Political Science, UK.

Bastos, J; Batterman, S A and Freire, F (2016) Significance of mobility in the life-cycle assessment of buildings. Building Research & Information, 44(4), pp. 376-393. ISSN 0961-3218

Battikha, M (2000) A computer-based system for construction quality management with application to highway pavements. PhD thesis, University of British Columbia, Canada.

Battikha, M G (2008) Reasoning mechanism for construction nonconformance root-cause analysis. Journal of Construction Engineering and Management, 134(4), pp. 280-288. ISSN 0733-9364

Beainy, F; Commuri, S and Zaman, M (2012) Quality assurance of hot mix asphalt pavements using the intelligent asphalt compaction analyzer. Journal of Construction Engineering and Management, 138(2), pp. 178-187. ISSN 0733-9364

Berghauser Pont, M; Haupt, P; Berg, P; Alstäde, V and Heyman, A (2021) Systematic review and comparison of densification effects and planning motivations. Buildings & Cities, 2(1), pp. 378-401. ISSN 2632-6655

Bergsdal, H; Brattebø, H; Bohne, R A and Müller, D B (2007) Dynamic material flow analysis for norway's dwelling stock. Building Research & Information, 35(5), pp. 557-570. ISSN 0961-3218

Bhardwaj, A and Sharma, R K (2020) Effect of industrial wastes and lime on strength characteristics of clayey soil. Journal of Engineering, Design and Technology, 18(6), pp. 1749-1772. ISSN 1726-0531

Bhaurkar, V P and Thakur, A G (2019) Investigation of crack in beams using anti-resonance technique and FEA approach. Journal of Engineering, Design and Technology, 17(6), pp. 1266-1284. ISSN 1726-0531

Bijleveld, F R; Miller, S R and Dorée, A G (2015) Making operational strategies of asphalt teams explicit to reduce process variability. Journal of Construction Engineering and Management, 141(5): 04015002, ISSN 0733-9364

Bina, K and Moghadas, N (2021) BIM-abm simulation for emergency evacuation from conference hall, considering gender segregation and architectural design. Architectural Engineering and Design Management, 17(5-6), pp. 361-375. ISSN 1745-2007

Birchmore, R C; Berry, T A; Wallis, S L; Tsai, S and Hernandez, G (2023) Thermal performance and indoor air quality in new, medium density houses: auckland, New Zealand. International Journal of Building Pathology and Adaptation, 41(1), pp. 279-300. ISSN 23984708

Brizendine, A L (1997) Risk based analysis of levees. PhD thesis, West Virginia University, USA.

Buhamdan, S; Duncheva, T and Alwisy, A (2021) Developing a BIM and simulation-based hazard assessment and visualization framework for CLT construction design. Journal of Construction Engineering and Management, 147(3): 04021003, ISSN 0733-9364

Camrass, K (2022) Urban regenerative thinking and practice: A systematic literature review. Building Research & Information, 50(3), pp. 339-350. ISSN 0961-3218

Carrière, S; Weigend Rodríguez, R; Pey, P; Pomponi, F and Ramakrishna, S (2020) Circular cities: The case of Singapore. Built Environment Project and Asset Management, 10(4), pp. 491-507. ISSN 2044-124X

Carroll, Steven Paige (2005) Risk-based approach to on-site wastewater treatment system siting design and management. PhD thesis, Queensland University of Technology, Australia.

Carvalho, R; Zhang, F; Liu, T; Yu, R; Chen, E and Oh, E (2026) Amenity preferences and design evaluation in Australian build-to-rent compact apartments: A VR/EEG study. Building Research & Information, 54(2), pp. 158-178. ISSN 0961-3218

Chan, I Y S and Chen, H (2024) Towards an integrative analysis of underground environment and human health: A survey and field measurement approach. Engineering, Construction and Architectural Management, 31(5), pp. 1807-1834. ISSN 0969-9988

Chapman, C (2023) Green and grey drainage infrastructure: costs and benefits of reducing surface water flood risk. PhD thesis, University of Oxford, UK.

Chatzipoulka, C and Nikolopoulou, M (2018) Urban geometry, SVF and insolation of open spaces: London and Paris. Building Research & Information, 46(8), pp. 881-898. ISSN 0961-3218

Chau, K W (1995) The validity of the triangular distribution assumption in Monte Carlo simulation of construction costs: Empirical evidence from Hong Kong. Construction Management and Economics, 13(1), pp. 15-21. ISSN 01446193

Chau, K W; Lai, L W C; Liang, J; Ng, F F and Wong, K T (2021) The negative impact of public sector-led redevelopment projects on the prices of old and new housing units in high density urban areas. International Journal of Construction Management, 21(11), pp. 1156-1164. ISSN 1562-3599

Chen, J. H.; Shen, L. and Yu, T. (2026) Predicting manpower allocation for landscape construction projects using xgboost and shap. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Chen, J. H.; Shen, L. and Yu, T. (2026) Predicting manpower allocation for landscape construction projects using xgboost and shap. Engineering, Construction and Architectural Management, pp. 1-19. ISSN 0969-9988

Chen, H; Feng, Z; Liu, Y; Chen, B; Deng, T; Qin, Y and Xu, W (2023) Multiobjective optimization of a 3D laser scanning scheme for engineering structures based on rf-NSGA-II. Journal of Construction Engineering and Management, 149(2): 4022169, ISSN 0733-9364

Chen, J; Taylor, J E and Comu, S (2017) Assessing task mental workload in construction projects: A novel electroencephalography approach. Journal of Construction Engineering and Management, 143(8): 04017053, ISSN 0733-9364

Chen, X; Zhang, Y; Zhao, B and Yang, S (2021) Investment probabilistic interval estimation for construction project using the hybrid model of SVR and GWO. Journal of Construction Engineering and Management, 147(5): 04021031, ISSN 0733-9364

Chen, Y; Zhuang, T and Liu, G (2023) A hybrid approach to supporting physical-change-based renewal projects selection decisions in high-density city: A case study of Chongqing. Engineering, Construction and Architectural Management, 30(7), pp. 2879-2903. ISSN 0969-9988

Chennarapu, H; Garala, T K; Chennareddy, R; Balunaini, U and Venkata Narasimha Reddy, G (2018) Compaction quality control of earth fills using dynamic cone penetrometer. Journal of Construction Engineering and Management, 144(9): 04018086, ISSN 0733-9364

Chiadighikaobi, P C and Ubani-Wokoma, B C (2025) Suitability of basalt textile-reinforced granite–periwinkle shell concrete for sustainable construction in Nigeria. Construction Economics and Building, 25(1), pp. 171-202. ISSN 2204-9029

Chileshe, N (2004) The application of TQM within small and medium sized construction related organisations. PhD thesis, Sheffield Hallam University, UK.

Chin, J. Y.; Ng, C. T.; Sa'ari, R.; Ng, H. S. and Thong, J. W. (2026) Energy retrofitting by using building information modelling-based energy model. International Journal of Building Pathology and Adaptation, 44(4), pp. 1062-1097. ISSN 2398-4708

Cho, Y; Wang, C and Zhuang, Z (2013) Framework for empirical process to improve nonnuclear gauge performance in hot-mix asphalt pavement construction. Journal of Construction Engineering and Management, 139(6), pp. 601-610. ISSN 0733-9364

Cho, Y K; Bode, T; Song, J and Jeong, J H (2012) Thermography-driven distress prediction from hot mix asphalt road paving construction. Journal of Construction Engineering and Management, 138(2), pp. 206-214. ISSN 0733-9364

Chua, D K H and Goh, Y M (2005) Poisson model of construction incident occurrence. Journal of Construction Engineering and Management, 131(6), pp. 715-722. ISSN 0733-9364

Colwell, D A F and Ariaratnam, S T (2003) Evaluation of high-density polyethylene pipe installed using horizontal directional drilling. Journal of Construction Engineering and Management, 129(1), pp. 47-55. ISSN 0733-9364

Comerford, P.; Kinnane, O.; O'Hegarty, R. and Crowe, P. (2026) Embodied carbon impacts of residential development siteworks: New assessment framework. Buildings & Cities, 7(1), pp. 467-487. ISSN 2632-6655

Commuri, S; Mai, A T and Zaman, M (2011) Neural network-based intelligent compaction analyzer for estimating compaction quality of hot asphalt mixes. Journal of Construction Engineering and Management, 137(9), pp. 634-644. ISSN 0733-9364

Cruz-Bello, G M; Galeana-Pizaña, J M and González-Arellano, S (2023) Urban growth in peri-urban, rural and urban areas: Mexico city. Buildings & Cities, 4(1), pp. 1-16. ISSN 2632-6655

Damdelen, O and Tansu, A (2022) Influence of recycled plastic on the thermal transmittance and sustainable assessment of concrete mixes. Journal of Construction Engineering and Management, 148(12): 04022135, ISSN 0733-9364

Davis, M C (2011) Psychological and organisational issues in the design of buildings and workplaces. PhD thesis, University of Leeds, UK.

De Garay, A (1982) Evaluation of public housing strategies in Mexico City: an exploratory goal programming approach. PhD thesis, Aston University, UK.

De Jarnette, V; McCarthy, L M; Bennert, T and Guercio, M C (2013) Use of mechanistic-empirical pavement design principles to assign asphalt pavement pay factor adjustments. Journal of Construction Engineering and Management, 139(11): 4013024, ISSN 0733-9364

Duksh, Y S; Kaushik, B K; Sarkar, S and Singh, R (2010) Performance comparison of carbon nanotube, nickel silicide nanowire and copper vlsi interconnects: Perspectives and challenges ahead. Journal of Engineering, Design and Technology, 8(3), pp. 334-353. ISSN 1726-0531

Dunston, P S; Savage, B M and Mannering, F L (2000) Weekend closure for construction of asphalt overlay on urban highway. Journal of Construction Engineering and Management, 126(4), pp. 313-315. ISSN 0733-9364

Edwards, D J and Yisa, S (2001) Modelling the magnitude of plant downtime: A tool for improving plant operations management. Engineering, Construction and Architectural Management, 8(3), pp. 225-232. ISSN 0969-9988

Ekanayake, E M A C; Shen, G; Kumaraswamy, M and Owusu, E K (2022) A fuzzy synthetic evaluation of vulnerabilities affecting supply chain resilience of industrialized construction in Hong Kong. Engineering, Construction and Architectural Management, 29(6), pp. 2358-2381. ISSN 0969-9988

Elazouni, A M (2006) Classifying construction contractors using unsupervised-learning neural networks. Journal of Construction Engineering and Management, 132(12), pp. 1242-1253. ISSN 0733-9364

Elghaish, F; Matarneh, S T and Alhusban, M (2022) The application of "deep learning" in construction site management: Scientometric, thematic and critical analysis. Construction Innovation, 22(3), pp. 580-603. ISSN 1471-4175

Fan, Y and Kokko, E (1997) Three-dimensional gaseous transfer within cellular plastic insulation and its consequences. Building Research & Information, 25(1), pp. 25-35. ISSN 0961-3218

Farnes, K; Hurst, N; Wong, W W and Wilkinson, S (2025) An exploratory study on the benefits of transit orientated development (tod) to rail infrastructure projects. Smart and Sustainable Built Environment, 14(2), pp. 310-325. ISSN 2046-6099

Fattahi Tabasi, S; Rafizadeh, H R; Andaji Garmaroudi, A and Banihashemi, S (2024) Optimizing urban layouts through computational generative design: density distribution and shape optimization. Architectural Engineering and Design Management, 20(5), pp. 1164-1184. ISSN 1745-2007

Ferenchak, N N (2025) Us road safety during COVID-19: Motorist, pedestrian and bicyclist fatality trends. International Journal of Disaster Resilience in the Built Environment, 16(2), pp. 193-208. ISSN 1759-5908

Flanagan, R and Marsh, L (2000) Measuring the costs and benefits of information technology in construction. Engineering, Construction and Architectural Management, 7(4), pp. 423-435. ISSN 0969-9988

Frandson, A (2019) Takt time planning as a work structuring method to improve construction work flow. PhD thesis, University of California, Berkeley, USA.

Galbraith, G H; Guo, J S and McLean, R C (2000) The effect of temperature on the moisture permeability of building materials. Building Research & Information, 28(4), pp. 245-259. ISSN 0961-3218

Gan, X L; Chang, R D; Langston, C and Wen, T (2019) Exploring the interactions among factors impeding the diffusion of prefabricated building technologies: Fuzzy cognitive maps. Engineering, Construction and Architectural Management, 26(3), pp. 535-553. ISSN 0969-9988

Gangrade, R (2021) Quantifying spatial geotechnical uncertainty to advance the practice of risk assessment and decision-making for tunnel projects. PhD thesis, Colorado School of Mines, USA.

George, A; Aboagye-Nimo, E and Mamphey, S (2021) The effects of skills shortages on construction costs in the UK. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 175(2), pp. 78-86. ISSN 17514304

Geus, Lucio Marcos de (2016) A support model for defining the location of voluntary delivery points for small construction and demolition waste generators. PhD thesis, Pontifícia Universidade Católica do Paraná, Brazil.

Giddings, B and Rogerson, R (2021) Compacting the city centre: Densification in two newcastles. Buildings & Cities, 2(1), pp. 185-202. ISSN 2632-6655

Glew, D; Johnston, D; Miles-Shenton, D and Thomas, F (2020) Retrofitting suspended timber ground-floors; comparing aggregated and disaggregated evaluation methods. Building Research & Information, 48(5), pp. 572-586. ISSN 0961-3218

Godoy-Shimizu, D; Armitage, P; Steemers, K and Chenvidyakarn, T (2011) Using display energy certificates to quantify schools' energy consumption. Building Research & Information, 39(6), pp. 535-552. ISSN 0961-3218

Godoy-Shimizu, D; Steadman, P and Evans, S (2021) Density and morphology: From the building scale to the city scale. Buildings & Cities, 2(1), pp. 92-113. ISSN 2632-6655

Graham, L D; Smith, S D and Dunlop, P (2005) Lognormal distribution provides an optimum representation of the concrete delivery and placement process. Journal of Construction Engineering and Management, 131(2), pp. 230-238. ISSN 0733-9364

Griffis, F H (1992) Bidding strategy: Winning overkey competitors. Journal of Construction Engineering and Management, 118(1), pp. 151-165. ISSN 0733-9364

Guanyu, W; Xiaoxia, L and Gab-Soo, H (2025) Research on the protection of and renewal strategies for historic buildings in the ancient city of liaocheng based on multisource data. Architectural Engineering and Design Management, 21(1), pp. 120-135. ISSN 1745-2007

Guo, S; Shen, G; Yang, J; Sun, B and Xue, F (2015) Embodied energy of service trading in Hong Kong. Smart and Sustainable Built Environment, 4(2), pp. 234-248. ISSN 2046-6099

Gupta, R; Gregg, M and Liu, C (2025) Local area energy mapping approach for high-density heat pump deployment. Buildings & Cities, 6(1), pp. 561-579. ISSN 2632-6655

Gurieva, V; Ilyina, A; Klyuev, S; Saidumov, M; Khezhev, T; Nedoseko, I; Fediuk, R; Shamanov, V and Yazyev, B (2025) Production of ceramic bricks using nickel slags as contribution to decarbonization. International Journal of Building Pathology and Adaptation, 43(4), pp. 652-664. ISSN 2398-4708

Guzman de la Cruz, A L (1998) Cost-performance criteria for seismic retrofitting. PhD thesis, University of Puerto Rico, Mayaguez, Puerto Roco.

Götze, V; Gerber, J D and Jehling, M (2024) Mapping municipal land policies: Applications of flexible zoning for densification. Buildings & Cities, 5(1), pp. 506-520. ISSN 2632-6655

Hadizadeh-Bazaz, M.; Navarro, I. J. and Yepes, V. (2026) Smart integration of non-destructive damage detection and life-cycle assessment for sustainable maintenance of coastal bridges. Smart and Sustainable Built Environment, pp. 1-27. ISSN 2046-6099

Hadjri, K (1992) The viability of 'no-fines' for the production of appropriate housing in Algeria. PhD thesis, CNAA, Oxford Polytechnic, UK.

Hamilton, I G; Summerfield, A J; Steadman, J P; Stone, A and Davies, M (2010) Exploring energy integration between new and existing developments. Building Research & Information, 38(6), pp. 593-609. ISSN 0961-3218

Haroon, M; Khan, R B N and Khitab, A (2025) Performance of concrete containing waste demolished concrete powder as a partial substitute for cement. International Journal of Building Pathology and Adaptation, 43(4), pp. 573-590. ISSN 2398-4708

Hassan, M M and Gruber, S (2008) Simulation of concrete paving operations on Interstate-74. Journal of Construction Engineering and Management, 134(1), pp. 2-9. ISSN 0733-9364

Hassan, M M and Gruber, S (2008) Application of discrete-event simulation to study the paving operation of asphalt concrete. Construction Innovation, 8(1), pp. 7-22. ISSN 1471-4175

Hauer, M (2012) A game-based learning approach to building conservation education in UK undergraduate built environment degrees. PhD thesis, University of Portsmouth, UK.

Henriksen, T; Lo, S; Knaack, U and Kirkegaard, P H (2023) Developing and testing a novel manufacturing method for complex geometry thin-walled gfrc panels by fabricating a 10 m high, self-supporting gfrc hyperbolic shell. Architectural Engineering and Design Management, 19(5), pp. 480-510. ISSN 1745-2007

Heron, E; Bowen, P and Lincoln, D (2005) Vandalism: A product of environmental design? Journal of Financial Management of Property and Construction, 10(3), pp. 181-191. ISSN 1366-4387

Hewa Welege, N M; Pan, W and Kumaraswamy, M (2024) Stakeholder collaboration to mitigate constraints to delivering low-carbon buildings: Insights from high-rise high-density cities. Engineering, Construction and Architectural Management, 31(11), pp. 4439-4461. ISSN 0969-9988

Hewa Welege, N M; Pan, W and Kumaraswamy, M M (2023) Engaging stakeholders to overcome the common constraints for delivering low carbon buildings in high-rise high-density cities. Journal of Construction Engineering and Management, 149(1): 04022157, ISSN 0733-9364

Hofstetter, M (2024) Community, markets, and conviviality : A political ecology of rural water supply. PhD thesis, Wageningen University and Research, Netherlands.

Holtzhower, D L (2015) Decision model to optimize wastewater treatment in the built environment. PhD thesis, University of Florida, USA.

Hu, W; Shu, X; Jia, X and Huang, B (2017) Recommendations on intelligent compaction parameters for asphalt resurfacing quality evaluation. Journal of Construction Engineering and Management, 143(9): 04017065, ISSN 0733-9364

Huang, Q; Chen, Y; Li, Y; Liu, S; Fan, Z; Chen, X and Chen, J (2026) Maco: An open-image data set with multiannotation strategies for building material counting. Journal of Construction Engineering and Management, 152(4): 04026008, ISSN 0733-9364

Huang, H (2003) The effects of building regulations control on the design of private residential buildings. PhD thesis, University of Hong Kong, Hong Kong.

Huang, H; Zhang, C and Hammad, A (2021) Effective scanning range estimation for using tls in construction projects. Journal of Construction Engineering and Management, 147(9): 04021106, ISSN 0733-9364

Hulio, Z H; Yousufzai, G and Jiang, W (2021) Statistical analysis of wind resource and energy potential assessment of quaidabad site, sindh Pakistan. Journal of Engineering, Design and Technology, 19(6), pp. 1291-1316. ISSN 1726-0531

Ikerd II, W F (2021) Level of acceptance (LOA) for scan-to-BIM creation. PhD thesis, University of Denver, USA.

Imran, S A; Commuri, S; Barman, M; Zaman, M and Beainy, F (2017) Modeling the dynamics of asphalt-roller interaction during compaction. Journal of Construction Engineering and Management, 143(7): 04017015, ISSN 0733-9364

Indrastuti (2014) Unit cost modelling of public building project in Kepulauan Riau, Indonesia. PhD thesis, University of Malaya, Malaysia.

Ioannou, P G (1987) Geologic prediction model for tunneling. Journal of Construction Engineering and Management, 113(4), pp. 569-590. ISSN 0733-9364

Irajifar, L; Sipe, N and Alizadeh, T (2016) The impact of urban form on disaster resiliency: A case study of Brisbane and Ipswich, Australia. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 259-275. ISSN 1759-5916

Irumba, R (2015) Modelling of construction safety performance and housing markets in Kampala, Uganda. PhD thesis, KTH Royal Institute of Technology, Sweden.

Isaacs, N and Hills, A (2014) Understanding the newzealand non-domestic building stock. Building Research & Information, 42(1), pp. 95-108. ISSN 0961-3218

Isidore, L J; Back, W E and Fry, G T (2001) Integrated probabilistic schedules and estimates from project simulated data. Construction Management and Economics, 19(4), pp. 417-426. ISSN 01446193

Isiofia, L A; Nna, E; Uzuegbunam, F O and Ibem, E O (2024) The association of physical development density, prevalence and types of microbes in colonized façade finishes in enugu metropolis, Nigeria. International Journal of Building Pathology and Adaptation, 42(6), pp. 1147-1168. ISSN 2398-4708

Ismaeel, W S E; Mohamed, F and Elakkad, N (2021) Scenarios of occupational capacity for high educational buildings in the time of COVID. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Itzhak-Ben-shalom, H.; Saroglou, T.; Multanen, V.; Vanunu, A.; Karnieli, A.; Katoshevski, D.; Davidovitch, N. and Meir, I. A. (2025) Environmental variables and air quality: Implications for planning and public health. Buildings & Cities, 6(1), pp. 597-618. ISSN 2632-6655

Jabbari, A (2020) Project planning algorithms: Lowering cost and improving delivery time in capital projects. PhD thesis, University of California, Berkeley, USA.

Jaselskis, E J; Han, H C; Grigas, J; Tan, L and Fahrion, D (2001) Status of roller mountable microwave asphalt pavement density sensor. Journal of Construction Engineering and Management, 127(1), pp. 46-52. ISSN 0733-9364

Jassim, H S H (2019) Assessing energy use and carbon emissions to support planning of environmentally sustainable earthmoving operations. PhD thesis, Luleå University of Technology, Sweden.

Jeelani, I; Albert, A; Han, K and Azevedo, R (2018) Are visual search patterns predictive of hazard recognition performance? Empirical investigation using eye-tracking technology. Journal of Construction Engineering and Management, 145(1): 04018115, ISSN 0733-9364

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Jin, Y (2018) Supervised learning for back analysis of excavations in the observational method. PhD thesis, University of Cambridge, UK.

Johnston, D W; Kahn, K P and Phillips, J B (1989) Formwork pressures in tall and thick concrete walls. Journal of Construction Engineering and Management, 115(3), pp. 444-461. ISSN 0733-9364

Kalla, M; Kalaycioglu, O; Hecht, R; Schneider, S and Schmidt, C (2024) Station biophilia–assessing the perception of greenery on railway platforms using a digital twin. Building Research & Information, 52(1-2), pp. 164-180. ISSN 0961-3218

Kalla, M; Kalaycioglu, O; Hecht, R; Schneider, S and Schmidt, C (2024) Station biophilia: Assessing the perception of greenery on railway platforms using a digital twin. Building Research & Information, 52(1-2), pp. 164-180. ISSN 0961-3218

Karadimitriou, N (2007) Re-use of previously developed land: housebuilder adaptation to a changing context. PhD thesis, University College London, UK.

Karami, S (2008) Using by-product industrial materials to replace all cement in construction products. PhD thesis, Coventry University, UK.

Khaleghi, S and Jadmavinejad, A (2024) Flood susceptibility mapping in anthropogenic wetland area, Shadegan County, Southwest of Iran. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 212-226. ISSN 1759-5916

Khamaksorn, A; Tah, J H M and Kurul, E (2022) Social networks and knowledge transfer in international construction joint venture projects: A case study in Thailand. Journal of Construction in Developing Countries, 27(1), pp. 111-137. ISSN 1823-6499

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Kinawy, S N (2017) Customizing information delivery for citizens in transportation infrastructure projects: Towards active community participation in decision-making. PhD thesis, University of Toronto, Canada.

Kirkham, R J and Boussabaine, A H (2001) Modelling probability distributions of facilities management costs for an NHS acute care hospital building. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Kirkham, R J; Boussabaine, A H and Awwad, B H (2002) Probability distributions of facilities management costs for whole life cycle costing in acute care nhs hospital buildings. Construction Management and Economics, 20(3), pp. 251-261. ISSN 01446193

Koem, C and Tantanee, S (2021) Flash flood hazard mapping based on AHP with GIS and satellite information in Kampong Speu province, Cambodia. International Journal of Disaster Resilience in the Built Environment, 12(5), pp. 457-470. ISSN 1759-5916

Kostourou, F (2021) Housing growth: Impacts on density, space consumption and urban morphology. Buildings & Cities, 2(1), pp. 55-78. ISSN 2632-6655

Krasnokutskaya, E (2003) Identification and estimation in highway procurement auctions under unobserved heterogeneity. PhD thesis, Yale University, USA.

Kulkarni, S; Edwards, D J; Parn, E A; Chapman, C; Aigbavboa, C O and Cornish, R (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16(6), pp. 869-888. ISSN 1726-0531

Lall, A B and Sethi, G (2024) Operationalising energy sufficiency for low-carbon built environments in urbanising India. Buildings & Cities, 5(1), pp. 645-661. ISSN 2632-6655

Lau, K K L; Ng, E; Ren, C; Ho, J C K; Wan, L; Shi, Y; Zheng, Y; Gong, F; Cheng, V; Yuan, C; Tan, Z and Wong, K S (2018) Defining the environmental performance of neighbourhoods in high-density cities. Building Research & Information, 46(5), pp. 540-551. ISSN 0961-3218

Lawani, K; Thomson, C; Hare, B and Duplicki, A (2024) Unpacking the perceptions of high-density living and zoning laws: A case of Philadelphia area, USA. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Lee, Y. J. (2026) Integrating patent analytics and employee sentiment: A multi-dimensional methodology for assessing organizational culture and R&D performance by company size in the Korean construction industry. Construction Management and Economics, 44(7), pp. 499-517. ISSN 0144-6193

Lee, D E; Lim, T K and Arditi, D (2012) Stochastic project financing analysis system for construction. Journal of Construction Engineering and Management, 138(3), pp. 376-389. ISSN 0733-9364

Li, L; Cui, X; Wang, J; Jin, H and Xu, H (2026) Automated tracking of worker and heavy equipment on tunnel construction sites: Deep-learning framework. Journal of Construction Engineering and Management, 152(2): 04025237, ISSN 0733-9364

Li, C (2023) Efficient and accurate assessment of fire spread over external claddings in high-rise buildings. PhD thesis, University of Manchester, UK.

Li, Liancheng (2025) Towards sustainable recovery of waste plastics with the Australian construction industry: Transition scenarios and environmental impact evaluation. PhD thesis, University of Adelaide, Australia.

Li, X and Sunikka-Blank, M (2021) Urban densification and social capital: Neighbourhood restructuring in jinan, China. Buildings & Cities, 2(1), pp. 244-263. ISSN 2632-6655

Liao, L; Gan, C; Yang, J and Liang, Y (2025) Impacts of safety capacity and personalized safety training on construction workers' hazard recognition using eye-tracking technology. Journal of Construction Engineering and Management, 151(6): 04025050, ISSN 0733-9364

Lin, S C (2015) An analysis for construction engineering networks. Journal of Construction Engineering and Management, 141(5): 04014096, ISSN 0733-9364

Lingard, H; Pirzadeh, P; Blismas, N; Wakefield, R and Kleiner, B (2014) Exploring the link between early constructor involvement in project decision-making and the efficacy of health and safety risk control. Construction Management and Economics, 32(9), pp. 918-931. ISSN 01446193

Lingard, H; Pirzadeh, P and Oswald, D (2019) Talking safety: Health and safety communication and safety climate in subcontracted construction workgroups. Journal of Construction Engineering and Management, 145(5): 04019029, ISSN 0733-9364

Liu, Lan (2020) Design guidance and development of construction stormwater technologies. PhD thesis, Auburn University, USA.

Livingstone, N; Fiorentino, S and Short, M (2021) Planning for residential 'value'? London's densification policies and impacts. Buildings & Cities, 2(1), pp. 203-219. ISSN 2632-6655

Lombard, P C (1991) The relationship between highway infrastructure and regional economic development. PhD thesis, Purdue University, USA.

Longzhen, Z and Feng, S (2023) Pedestrian evacuation method based on improved cellular automata in emergencies. Engineering, Construction and Architectural Management, 30(8), pp. 3645-3673. ISSN 0969-9988

Loyola, M (2019) A method for real-time error detection in low-cost environmental sensors data. Smart and Sustainable Built Environment, 8(4), pp. 338-350. ISSN 2046-6099

Lu, H; Qi, J; Li, J; Xie, Y; Xu, G and Wang, H (2020) Multi-agent based safety computational experiment system for shield tunneling projects. Engineering, Construction and Architectural Management, 27(8), pp. 1963-1991. ISSN 0969-9988

Lu, Y; Girling, C; Martino, N; Kim, J; Kellett, R and Salter, J (2023) Climate action at the neighbourhood scale: Comparing municipal future scenarios. Buildings & Cities, 4(1), pp. 83-102. ISSN 2632-6655

Lucke, T and Arthur, S (2011) Plastic pipe pressures in siphonic roof drainage systems. Building Research & Information, 39(1), pp. 79-92. ISSN 0961-3218

Lyu, S; Hon, C K H; Chan, A P C; Javed, A A; Zhang, R P and Wong, F K W (2020) An exploratory study of safety communication networks of ethnic minority crews in the Hong Kong construction industry. Engineering, Construction and Architectural Management, 28(4), pp. 1156-1175. ISSN 0969-9988

M.S, M; Katpatal, Y B and Londhe, D S (2024) Measurement of city road network resilience in hazardous flood events. International Journal of Disaster Resilience in the Built Environment, 15(2), pp. 274-288. ISSN 1759-5916

Macchiarulo, V (2022) Integration of satellite radar interferometry and civil engineering procedures to assess building and infrastructure conditions. PhD thesis, University of Bath, UK.

Machado, M V; La Roche, P M; Mustieles, F and De Oteiza, I (2000) The fourth house: The design of a bioclimatic house in Venezuela. Building Research & Information, 28(3), pp. 196-211. ISSN 0961-3218

Mantha, B R K and Garcia De Soto, B (2022) Investigating the fiducial marker network characteristics for autonomous mobile indoor robot navigation using ros and gazebo. Journal of Construction Engineering and Management, 148(10): 04022115, ISSN 0733-9364

Markos, P A and Dentsoras, A J (2013) A heuristic approach for the positioning of elevator hoistways based on the utilization intensity index. Architectural Engineering and Design Management, 9(4), pp. 209-228. ISSN 1745-2007

Marsh, L (1998) Portable datafiles in the construction supply chain. PhD thesis, University of Reading, UK.

Marsh, L E and Finch, E F (1999) Using portable datafiles in the construction supply chain. Building Research & Information, 27(3), pp. 127-139. ISSN 0961-3218

Martino, N; Girling, C and Lu, Y (2021) Urban form and livability: Socioeconomic and built environment indicators. Buildings & Cities, 2(1), pp. 220-243. ISSN 2632-6655

Mavahebi Tabatabai, G.; Tahsildoost, M.; Ardekani, A. and Zomorodian, Z. S. (2026) Optimizing urban block layouts and density distribution: A generative design framework for neighborhood performance. Smart and Sustainable Built Environment, 15(5), pp. 1722-1750. ISSN 2046-6099

Mavrogianni, A; Davies, M; Chalabi, Z; Wilkinson, P; Kolokotroni, M and Milner, J (2009) Space heating demand and heatwave vulnerability: London domestic stock. Building Research & Information, 37(5-6), pp. 583-597. ISSN 0961-3218

Mazari, M (2014) Studying the parameters involved with modulus-based construction quality control for compaction of unbound pavement layers. PhD thesis, University of Texas at El Paso, USA.

McGinty, L N (2020) Business model innovation for green urban infrastructure. PhD thesis, University of Newcastle upon Tyne, UK.

Mdibi, L; Van Zyl, R; Kosch, M and Ward, J (2021) A land-based hf transmitter for ionospheric propagation studies using superdarn radars. Journal of Engineering, Design and Technology, 19(6), pp. 1648-1659. ISSN 1726-0531

Meinel, G; Hecht, R and Herold, H (2009) Analyzing building stock using topographic maps and GIS. Building Research & Information, 37(5-6), pp. 468-482. ISSN 0961-3218

Mello Saraiva Caldeira, L M and Brito, A (2014) Use of soil-rock mixtures in dam construction. Journal of Construction Engineering and Management, 140(8): 04014030, ISSN 0733-9364

Menzies, B; Emmanuel, R; Thomson, C and Walton, J (2010) Creating the conditions that facilitate the development of equitable, low carbon communities in Scotland. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Meriläinen, S and Tervo, A (2025) The changing typology of urban apartment buildings in Aurinkolahti. Buildings & Cities, 6(1), pp. 50-69. ISSN 2632-6655

Miglioranza, P; Scanu, A; Simionato, G; Sinigaglia, N and Califano, A (2024) Machine learning and engineering feature approaches to detect events perturbing the indoor microclimate in ringebu and heddal stave churches (Norway). International Journal of Building Pathology and Adaptation, 42(1), pp. 35-47. ISSN 23984708

Minchin, R E and Thomas, H R (2003) Validation of vibration-based onboard asphalt density measuring system. Journal of Construction Engineering and Management, 129(1), pp. 1-7. ISSN 0733-9364

Mirahadi, S (2020) EvacuSafe: A smart evacuation management system for buildings. PhD thesis, University of Toronto, Canada.

Moaveni, B (2007) System and damage identification of civil structures. PhD thesis, University of California, San Diego, USA.

Mohamadi, Y; Celik, T and Celik, T (2024) Optimising building envelope and insulation materials for energy efficiency and life-cycle cost in Cypriot residences. Architectural Engineering and Design Management, 20(5), pp. 1060-1078. ISSN 1745-2007

Mohareb, E; Gillich, A and Bristow, D (2022) Participation in domestic energy retrofit programmes: Key spatio-temporal drivers. Buildings & Cities, 3(1), pp. 356-375. ISSN 2632-6655

Morton, R R (1982) The speculative housebuilding industry in the nineteen seventies. PhD thesis, University of Liverpool, UK.

Muhammad, A; Usman, N and Gambo, N (2022) Effect of binary blended pozzolanic materials on properties of self-compacting concrete. International Journal of Construction Management, 22(7), pp. 1323-1332. ISSN 1562-3599

Muleya, F; Mulenga, B; Zulu, S L; Nwaubani, S; Tembo, C K and Mushota, H (2021) Investigating the suitability and cost-benefit of copper tailings as partial replacement of sand in concrete in Zambia: An exploratory study. Journal of Engineering, Design and Technology, 19(4), pp. 828-849. ISSN 1726-0531

Mándoki, R (2022) The social sustainability of standardisation in the Hungarian residential building sector. PhD thesis, University of Cambridge, UK.

Nair, S G; Nguyen, Q D; Zhu, Q; Karimi, M; Gan, Y; Wang, X; Castel, A; Irga, P; da Rocha, C G d; Torpy, F; Wilkinson, S; Moreau, D and Delhomme, F (2025) Suitability of calcined clay and ground granulated blast furnace slag geopolymer binder for hempcrete applications. Built Environment Project and Asset Management, 15(5), pp. 924-936. ISSN 2044-124X

Nie, Z A and Wong, K C (2012) Why build more to earn less: Property right implications of urban villages. International Journal of Construction Management, 12(4), pp. 65-82. ISSN 1562-3599

Nourian, P; Rezvani, S; Valeckaite, K and Sariyildiz, S (2018) Modelling walking and cycling accessibility and mobility: The effect of network configuration and occupancy on spatial dynamics of active mobility. Smart and Sustainable Built Environment, 7(1), pp. 101-116. ISSN 2046-6099

O'Mahony, M M (1990) Recycling of materials in civil engineering. PhD thesis, University of Oxford, UK.

Okeyinka, O M (2016) The applicability of recycled waste paper as lightweight building materials. PhD thesis, University of Wolverhampton, UK.

Okoyeh, I. I. and Ezezue, A. M. (2026) Assessment of noise levels in architectural design studios in universities in South-East Nigeria. International Journal of Building Pathology and Adaptation, 44(3), pp. 704-719. ISSN 2398-4708

Okunola, O H and Bako, A I (2023) Exploring residential characteristics as determinants of household adaptation to climate change in Lagos, Nigeria. International Journal of Disaster Resilience in the Built Environment, 14(1), pp. 115-131. ISSN 1759-5916

Ottesen, J (2019) CPM schedule density: A new predictor for productivity loss. PhD thesis, University of Washington, USA.

Pacheco-Torres, R; Etxebarria-Berrizbeitia, S and Gago, E J (2024) Influence of urban density on energy retrofit of building stock: Case study of Spain. Architectural Engineering and Design Management, 20(6), pp. 1832-1855. ISSN 1745-2007

Palme, M; Inostroza, L and Salvati, A (2018) Technomass and cooling demand in South America: A superlinear relationship? Building Research & Information, 46(8), pp. 864-880. ISSN 0961-3218

Pan, W; Yang, Y and Pan, M (2023) Implementing modular integrated construction in high-rise high-density cities: Perspectives in Hong Kong. Building Research & Information, 51(3), pp. 354-368. ISSN 0961-3218

Pandimani, M R; Ponnada, M R and Geddada, Y (2024) Finite-element modeling of partially prestressed concrete beams with unbonded tendon under monotonic loadings. Journal of Engineering, Design and Technology, 22(1), pp. 235-256. ISSN 1726-0531

Payne, B (1998) Project risk analysis. PhD thesis, Nottingham Trent University, UK.

Perrucci, D V (2021) Methods for scenario modeling of post-disaster temporary housing. PhD thesis, Vanderbilt University, USA.

Persily, A K; Gorfain, J and Brunner, G (2006) Survey of ventilation rates in office buildings. Building Research & Information, 34(5), pp. 459-466. ISSN 0961-3218

Pivo, G (2008) Responsible property investment criteria developed using the Delphi method. Building Research & Information, 36(1), pp. 20-36. ISSN 0961-3218

Praticò, F G; Antonio, C and Domenico, T (2012) Influence of dispersion and location on pay adjustment in construction engineering. Journal of Construction Engineering and Management, 138(10), pp. 1125-1130. ISSN 0733-9364

Price, M (2005) State prevailing wage laws and construction labor markets. PhD thesis, University of Utah, USA.

Pryke, S D (2005) Towards a social network theory of project governance. Construction Management and Economics, 23(9), pp. 927-939. ISSN 01446193

Pryke, S D; Zagkli, G and Kougia, I (2011) Resource provision ego-networks in small Greek construction firms. Building Research & Information, 39(6), pp. 616-636. ISSN 0961-3218

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Qian, Q K; Fan, K and Chan, E H W (2016) Regulatory incentives for green buildings: Gross floor area concessions. Building Research & Information, 44(5-6), pp. 675-693. ISSN 0961-3218

Rad, H N and Khosrowshahi, F (1999) Visualization of the impact of time on internal flooring. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Rehman, A; GhaffarianHoseini, A; Naismith, N; Almhafdy, A; Ghaffarianhoseini, A; Tookey, J and Urrehman, S (2025) Development of trust-based autonomous driving framework in New Zealand. Smart and Sustainable Built Environment, 14(2), pp. 429-470. ISSN 2046-6099

Rezaei, M; Mostafaeipour, A; Jafari, N; Naghdi-Khozani, N and Moftakharzadeh, A (2020) Wind and solar energy utilization for seawater desalination and hydrogen production in the coastal areas of southern Iran. Journal of Engineering, Design and Technology, 18(6), pp. 1951-1969. ISSN 1726-0531

Rilett, L R (1998) Effect of variability on end product specifications. Journal of Construction Engineering and Management, 124(2), pp. 139-145. ISSN 0733-9364

Rilett, L R (1998) Identifying component variability of end product specification tests. Journal of Construction Engineering and Management, 124(2), pp. 133-138. ISSN 0733-9364

Riley, D R; Varadan, P; James, J S and Thomas, H R (2005) Benefit-cost metrics for design coordination of mechanical, electrical, and plumbing systems in multistory buildings. Journal of Construction Engineering and Management, 131(8), pp. 877-889. ISSN 0733-9364

Rinkinen, J; Shove, E and Smits, M (2021) Conceptualising urban density, energy demand and social practice. Buildings & Cities, 2(1), pp. 79-91. ISSN 2632-6655

Rodrigues, M and Franco, M (2023) The role of citizens and transformation of energy, water, and waste infrastructure for an intelligent, sustainable environment in cities. Smart and Sustainable Built Environment, 12(2), pp. 385-406. ISSN 2046-6099

Rouhana, F and Jawad, D (2020) Transportation network resilience against failures: GIS-based assessment of network topology role. International Journal of Disaster Resilience in the Built Environment, 12(4), pp. 357-370. ISSN 1759-5916

Runeson, G r (1996) Models of construction price determination: A comparative appraisal. PhD thesis, Queensland University of Technology, Australia.

Sachs, T and Tiong, R L K (2009) Quantifying qualitative information on risks: Development of the QQIR method. Journal of Construction Engineering and Management, 135(1), pp. 56-71. ISSN 0733-9364

Sahebzadeh, S; Dalvand, Z; Sadeghfar, M and Heidari, A (2020) Vernacular architecture of Iran's hot regions; elements and strategies for a comfortable living environment. Smart and Sustainable Built Environment, 9(4), pp. 573-593. ISSN 2046-6099

Saito, S M; Assis Dias, M C; Ribeiro, D F; Alvalá, R C S; Souza, D B; Santana, R A S M; Souza, P A; Ribeiro, J V M and Stenner, C (2021) Disaster risk areas in Brazil: Outcomes from an intra-urban scale analysis. International Journal of Disaster Resilience in the Built Environment, 12(2), pp. 238-250. ISSN 1759-5916

Salamati, A A (2001) Urban housing design in Iran in response to socio-cultural and environmental conditions. PhD thesis, University of Strathclyde, UK.

Salat, S (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information, 37(5-6), pp. 598-609. ISSN 0961-3218

Saleem, M; Elshami, M M and Najjar, M (2017) Development, testing, and implementation strategy of a translucent concrete-based smart lane separator for increased traffic safety. Journal of Construction Engineering and Management, 143(5): 04016129, ISSN 0733-9364

Salter, J; Lu, Y; Kim, J C; Kellett, R; Girling, C; Inomata, F and Krahn, A (2020) Iterative 'what-if' neighborhood simulation: Energy and emissions impacts. Buildings & Cities, 1(1), pp. 293-307. ISSN 2632-6655

Saratsis, E; Dogan, T and Reinhart, C F (2017) Simulation-based daylighting analysis procedure for developing urban zoning rules. Building Research & Information, 45(5), pp. 478-491. ISSN 0961-3218

Sarireh, M (2022) Examining the suitability of Tripoli as admixture in cement paste. International Journal of Construction Management, 22(16), pp. 3169-3174. ISSN 1562-3599

Sarker, R I; Mailer, M and Sikder, S K (2020) Walking to a public transport station: Empirical evidence on willingness and acceptance in Munich, Germany. Smart and Sustainable Built Environment, 9(1), pp. 38-53. ISSN 2046-6099

Schexnayder, C; Knutson, K and Fente, J (2005) Describing a beta probability distribution function for construction simulation. Journal of Construction Engineering and Management, 131(2), pp. 221-229. ISSN 0733-9364

Schiller, G (2007) Urban infrastructure: Challenges for resource efficiency in the building stock. Building Research & Information, 35(4), pp. 399-411. ISSN 0961-3218

Schiller, G; Blum, A; Hecht, R; Oertel, H; Ferber, U and Meinel, G (2021) Urban infill development potential in Germany: Comparing survey and GIS data. Buildings & Cities, 2(1), pp. 36-54. ISSN 2632-6655

Schiller, G; Gruhler, K and Xie, X (2020) Assessing the efficiency of indoor and outdoor access-related infrastructure. Buildings & Cities, 1(1), pp. 56-69. ISSN 2632-6655

Schmitt, R L (1998) Development of statistically based methods to determine QC/QA testing levels for hot-mix asphalt construction. PhD thesis, University of Wisconsin - Madison, USA.

Schropfer, T (2004) Relational geographies of building practice: An analytic framework. DDes thesis, Harvard University, USA.

Scott, J R (2004) Optimising the relationship between passive solar design of new housing and the economics of construction and land value. PhD thesis, Robert Gordon University, UK.

Scott, J R; Edge, M; Laing, R and Martin, P (2004) Optimising the relationship between passive solar design of new housing and the economics of construction and land value. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Shahin, A; Abourizk, S M and Mohamed, Y (2011) Modeling weather-sensitive construction activity using simulation. Journal of Construction Engineering and Management, 137(3), pp. 238-246. ISSN 0733-9364

Shahin, A A (2007) A framework for cold weather construction simulation. PhD thesis, University of Alberta, Canada.

Shamsollahi, D; Moselhi, O and Khorasani, K (2024) Automated detection and segmentation of mechanical, electrical, and plumbing components in indoor environments by using the yolact++ architecture. Journal of Construction Engineering and Management, 150(8): 04024100, ISSN 0733-9364

Shang, M; Zhang, Y; He, Z; Qiao, H; Liu, X; Feng, Q; Xue, C; Zhang, Y; Su, F; Wang, J; Han, Y and Meng, X (2023) Workability properties of specified density concrete with municipal solid waste incinerator tailings added as a lightweight aggregate. Journal of Construction Engineering and Management, 149(8): 04023058, ISSN 0733-9364

Shen, Q; Wang, H and Tang, B S (2014) A decision-making framework for sustainable land use in Hong Kong's urban renewal projects. Smart and Sustainable Built Environment, 3(1), pp. 35-53. ISSN 2046-6099

Shi, Q and Wang, Z (2025) Spatial-temporal evaluation of total-factor energy efficiency in Chinese construction industry based on three-stage super-efficiency sbm-DEA model. Engineering, Construction and Architectural Management, 32(9), pp. 5716-5742. ISSN 0969-9988

Shieh, E; Habibi, K; Torabi, K and Masoumi, H E (2014) Earthquake risk in urban street network: An example from region 6 of Tehran, Iran. International Journal of Disaster Resilience in the Built Environment, 5(4), pp. 413-426. ISSN 1759-5916

Shuler, S and Nobe, M D (2007) Edge cracking in residential development hot mix asphalt pavements. International Journal of Construction Education and Research, 3(3), pp. 179-197. ISSN 1557-8771

Sinfield, J V and Einstein, H H (1998) Tunnel construction costs for tube transportation systems. Journal of Construction Engineering and Management, 124(1), pp. 48-57. ISSN 0733-9364

Singh, V V (2024) Data-driven production planning and control using work density for on-site building construction. PhD thesis, University of California, Berkeley, USA.

Singh, V V and Tommelein, I D (2023) Visual workload leveling and zoning using work density method for construction process planning. Journal of Construction Engineering and Management, 149(10): 04023102, ISSN 0733-9364

Skitmore, M and Lo, H P (2002) A method for identifying high outliers in construction contract auctions. Engineering, Construction and Architectural Management, 9(2), pp. 90-130. ISSN 0969-9988

Smith, B A V (2016) Assessment of carbon and nutrient export from a peatland windfarm construction site. PhD thesis, University of Glasgow, UK.

Smith, D (2020) Rank and file union organising and employers' counter-mobilisation: The role of activists in the mobilisation of 'self-employed' construction workers. PhD thesis, University of the West of England, Bristol, UK.

Sohail, M G; Salih, M; Al Nuaimi, N and Kahraman, R (2019) Corrosion performance of mild steel and epoxy coated rebar in concrete under simulated harsh environment. International Journal of Building Pathology and Adaptation, 37(5), pp. 657-678. ISSN 23984708

Somani, N; Tyagi, Y K and Gupta, N K (2024) An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of cu-sic composites. Journal of Engineering, Design and Technology, 22(1), pp. 77-88. ISSN 1726-0531

Spillane, J P; Flood, M; Lukumon, O O; von Meding, J K and Konanahalli, A (2013) Urban high-density construction sites and their surrounding community: Issues encountered and strategies adopted by contractors. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Steadman, P; Evans, S; Liddiard, R; Godoy-Shimizu, D; Ruyssevelt, P and Humphrey, D (2020) Building stock energy modelling in the UK: The 3DStock method and the London building stock model. Buildings & Cities, 1(1), pp. 100-119. ISSN 2632-6655

Steel, A C (1985) The diffusion of working time innovations in manufacturing and construction industry. PhD thesis, Brunel University, UK.

Stewart, J; Minchin, R E; Jaselskis, E J; Dayal, V and Smith, G (2004) Potential construction applications for thermoset composite scrap material. Journal of Construction Engineering and Management, 130(2), pp. 199-205. ISSN 0733-9364

Struck, C (2012) Uncertainty propagation and sensitivity analysis techniques in building performance simulation to support conceptual building and system design. PhD thesis, Eindhoven University of Technology, Netherlands.

Suhomlinova, O O (1996) Organizational transformation in the post-Soviet economy: The case of the Russian construction industry, 1985-1993. PhD thesis, Duke University, USA.

Sun, X (2016) Energy-efficient retrofits for existing buildings: a multi-dimensional, comparative study of buildings in Hong Kong, Shanghai and Singapore, with focus on operation and maintenance. PhD thesis, University of Hong Kong, Hong Kong.

Szalay, Z (2008) Modelling building stock geometry for energy, emission and mass calculations. Building Research & Information, 36(6), pp. 557-567. ISSN 0961-3218

Tahmasebinia, F; M.E. Sepasgozar, S; Shirowzhan, S; Niemela, M; Tripp, A; Nagabhyrava, S; Mansuri, K Z and Alonso-Marroquin, F (2020) Criteria development for sustainable construction manufacturing in Construction Industry 4.0: Theoretical and laboratory investigations. Construction Innovation, 20(3), pp. 379-400. ISSN 1471-4175

Tamimi, S T (1989) An influence diagramming based risk analysis system. PhD thesis, University of Colorado at Boulder, USA.

Tarpio, J and Lehtovuori, P (2026) Horizontal building extensions: Potential in Finnish blocks of flats. Buildings & Cities, 7(1), pp. 445-466. ISSN 2632-6655

Teferra, K (2012) Developments in the theory and applications of the variability response function concept. PhD thesis, Columbia University, USA.

Teller, J (2021) Regulating urban densification: What factors should be used? Buildings & Cities, 2(1), pp. 302-317. ISSN 2632-6655

Teller, J (2021) Urban density and covid-19: Towards an adaptive approach. Buildings & Cities, 2(1), pp. 150-165. ISSN 2632-6655

Tixier, A J-P (2015) Leveraging unstructured construction injury reports to predict safety outcomes and model safety risk using natural language processing, machine learning, and probability theory. PhD thesis, University of Colorado at Boulder, USA.

Tokede, O and Wamuziri, S (2012) Perceptions of fuzzy set theory in construction risk analysis. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Tommelein, I D (2022) Work density method for takt planning of construction processes with nonrepetitive work. Journal of Construction Engineering and Management, 148(12): 04022134, ISSN 0733-9364

Tong, P and Wilhelm, H C (2022) A strategy for integrating hillside dwelling design and automated construction techniques. Smart and Sustainable Built Environment, 11(2), pp. 387-403. ISSN 2046-6099

Toprakli, A. Y. and Satir, M. S. (2026) Evaluating the impact of gender segregation and egress design on mosque evacuation performance: An abm study. Architectural Engineering and Design Management, 22(2), pp. 402-425. ISSN 1745-2007

Tugrul Okbaz, F (2025) Evaluation of space efficiency criteria in high-rise buildings based on functions: A case study of türkiye. Architectural Engineering and Design Management, 21(1), pp. 60-77. ISSN 1745-2007

Uchehara, I; Hamma-adama, M and Moore, D (2020) Highway sustainability construction: Reducing carbon emissions using process management. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Venkataraman, V and Cheng, J C P (2014) Social network analysis on the inter-organizational interactions in green building projects. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Vidanapathirana, M; Perera, N; Emmanuel, R and Coorey, S (2025) High-rise building density optimization for air quality improvement and investment potential. Built Environment Project and Asset Management, 15(3), pp. 467-482. ISSN 2044-124X

Wade, F and Han, Y (2024) Mapping supply chains for energy retrofit. Buildings & Cities, 5(1), pp. 388-399. ISSN 2632-6655

Wallace, D and Wallace, R (2011) Consequences of massive housing destruction: The New York city fire epidemic. Building Research & Information, 39(4), pp. 395-411. ISSN 0961-3218

Walsh, K D; Houston, W N and Houston, S L (1997) Field implications of current compaction specification design practices. Journal of Construction Engineering and Management, 123(4), pp. 363-370. ISSN 0733-9364

Wan, M.; Li, L.; Yuan, M. and Yin, X. (2026) Modeling stakeholder-associated risk networks in the life cycle of building-integrated photovoltaic projects. Engineering, Construction and Architectural Management, 33(7), pp. 5469-5494. ISSN 0969-9988

Wang, C; Qiao, H; Li, Q; Su, R and An, B (2024) Advances in recycled concrete research: Improving shrinkage for sustainable building applications. Architectural Engineering and Design Management, 20(6), pp. 1589-1611. ISSN 1745-2007

Wang, H (2015) The interplay of formal and informal institutions for procurement innovation: a social network approach. PhD thesis, University of Hong Kong, Hong Kong.

Wang, J; Liang, M and Liao, P C (2024) Toward an intuitive device for construction hazard recognition management: Eye fixation-related potentials in reinvestigation of hazard recognition performance prediction. Journal of Construction Engineering and Management, 150(5): 04024028, ISSN 0733-9364

Wang, X; Yin, Y and Xu, Z (2022) The influence of trust networks on public–private partnership project performance. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 177(2), pp. 65-74. ISSN 17514304

Wang, Z (2020) Building internal heat dissipation of special shaped columns composed of concrete-filled square steel tubes based on thermal bridge models. International Journal of Building Pathology and Adaptation, 38(3), pp. 441-449. ISSN 23984708

Welege, N M H; Pan, W and Kumaraswamy, M M (2021) Constraints to delivering low carbon buildings in high-rise high-density cities. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Wheat, P E (2013) Econometric cost analysis in vertically separated railways. PhD thesis, University of Leeds, UK.

White, G and Jamshidi, A (2022) Resetting dense graded airport asphalt production and construction tolerances. International Journal of Construction Management, 22(4), pp. 632-643. ISSN 1562-3599

Wright, C E (1980) The energy requirements of residential developments. PhD thesis, University of Surrey, UK.

Wu, G; Hu, Z; Zheng, J; Zhao, X and Zuo, J (2021) Effects of structure characteristics of project network on conflicts and project success. Engineering, Construction and Architectural Management, 28(1), pp. 101-124. ISSN 0969-9988

Wu, H; Sun, X and Wu, Y (2022) Methods for probability distributions estimation of indoor environmental parameters and long-term IEQ assessment. Building Research & Information, 50(7), pp. 771-791. ISSN 0961-3218

Wuni, I Y and Mazher, K M (2024) Ending the suitability quantification dilemma: Intelligent decision support system for modular integrated construction in a high-density metropolis. Construction Innovation, 24(4), pp. 1026-1047. ISSN 1471-4175

Yakovlev, G I; Gordina, A; Drochytka, R; Buryanov, A F and Smirnova, O (2021) Structure and properties of modified gypsum binder. Smart and Sustainable Built Environment, 10(4), pp. 702-710. ISSN 2046-6099

Yan, L; Chen, Y and Cao, T (2024) Integrated construction consulting project performance improvement in China using network structure and team boundary-spanning behavior: A configurational analysis. Engineering, Construction and Architectural Management, 31(11), pp. 4462-4481. ISSN 0969-9988

Yang, H; Chan, A P C and Li, Q (2010) Density dependence in the Chinese construction industry focus on mortality of Jiangsu province (1989-2007). Engineering, Construction and Architectural Management, 17(6), pp. 563-580. ISSN 0969-9988

Yang, L and Shi, J J (2010) Experimental study on the impact of rainfall on RCC construction. Journal of Construction Engineering and Management, 136(5), pp. 477-483. ISSN 0733-9364

Yang, Y (2020) An integrated infrastructure asset management model to improve the resilience of high-density cities. PhD thesis, University of Hong Kong, Hong Kong.

Yang, Y; Li, Y; Kral, K; Hupert, N and Dogan, T (2021) Urban design attributes and resilience: COVID-19 evidence from New York city. Buildings & Cities, 2(1), pp. 618-636. ISSN 2632-6655

Yang, Y; Pan, M and Pan, W (2022) Integrated offsite logistics scheduling approach for high-rise modular building projects. Journal of Construction Engineering and Management, 148(6): 04022032, ISSN 0733-9364

Yap, J Y L; Ho, C C and Ting, C Y (2019) A systematic review of the applications of multi-criteria decision-making methods in site selection problems. Built Environment Project and Asset Management, 9(4), pp. 548-563. ISSN 2044-124X

Yimprayoon, C (2012) Energy efficiency design strategies for buildings with grid-connected photovoltaic systems. PhD thesis, University of Michigan, USA.

Yoon, S; Hastak, M and Lee, J (2018) Suitability of intelligent compaction for asphalt pavement quality control and quality assurance. Journal of Construction Engineering and Management, 144(4): 04018006, ISSN 0733-9364

You, H; Xu, F and Du, J (2023) Improved boundary identification of stacked objects with sparse lidar augmentation scanning. Journal of Construction Engineering and Management, 149(11): 04023104, ISSN 0733-9364

Yuan, Y; Zhou, X and Zhang, X (2019) Numerical and experimental study on the characteristics of radiant ceiling systems. Building Research & Information, 47(8), pp. 912-927. ISSN 0961-3218

Zaman, A A U and Abdelaty, A (2025) Effects of uav imagery overlap on photogrammetric data quality for construction applications. International Journal of Construction Management, 25(16), pp. 1901-1916. ISSN 1562-3599

Zaryoun, M and Hosseini, M (2019) Lightweight fiber-reinforced clay as a sustainable material for disaster resilient architecture of future buildings. Architectural Engineering and Design Management, 15(6), pp. 430-444. ISSN 1745-2007

Zhang, S (2017) Pavement surface distress detection, assessment, and modeling using geospatial techniques. PhD thesis, University of New Mexico, USA.

Zhang, X; Li, Y and Wu, D (2020) Developing an underground utility occupation index for efficient urban utilities planning. Journal of Construction Engineering and Management, 146(5): 04020036, ISSN 0733-9364

Zhu, K; Xiang, Y; Bu, J and Zhang, H (2021) The design and construction of public service building in developing rural regions during the post COVID-19 period: Cased on a Chinese village centre. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Zhuravchak, R; Nord, N and Brattebø, H (2022) The effect of building attributes on the energy performance at a scale: An inferential analysis. Building Research & Information, 50(6), pp. 662-680. ISSN 0961-3218

Ziegler, E H (2009) The case for megapolitan growth management in the twenty-first century: Regional urban planning and sustainable development in the USA. International Journal of Law in the Built Environment, 1(2), pp. 105-129. ISSN 1756-1450

Zong, H; Wang, G and Cao, D (2025) Collaborative networks between contractors and subcontractors for infrastructure development: A comparative study of national quality award projects in China. Engineering, Construction and Architectural Management, 32(2), pp. 1074-1096. ISSN 0969-9988

de Bem, D H; Lima, D P B and Medeiros-Junior, R A (2018) Effect of chemical admixtures on concrete's electrical resistivity. International Journal of Building Pathology and Adaptation, 36(2), pp. 174-187. ISSN 23984708

du Toit, J and Wagner, C (2020) The effect of housing type on householders' self-reported participation in recycling. Smart and Sustainable Built Environment, 9(4), pp. 395-412. ISSN 2046-6099

Çepni, M. S.; Kutluca, A. K.; Salihoğlu, T.; Atmaca, A. and Mintemur, S. (2026) Changing land-use metrics in mass housing: Türkiye case study. Buildings & Cities, 7(1), pp. 541-558. ISSN 2632-6655

Şahin, A U (2025) The disastrousness of asylum: Syrian asylum seekers and their impact on disastrousness in the kahramanmaraş earthquakes. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 363-377. ISSN 1759-5908