Items with Index Term: correlation analysis

Abdelalim, A M; Salem, M; Al-Sabah, R; Said, S O; ElShafei, H M and Galal Badawy, M (2025) Optimizing claim management process groups to enhance construction project success. International Journal of Construction Management, 25(13), pp. 1583-1595. ISSN 1562-3599

Abdul Rahman, N.; Belayutham, S. and Che Ibrahim, C. K. I. (2026) Socio-technical dynamics of barriers to sustainable railway projects in Malaysia. Built Environment Project and Asset Management, 16(3), pp. 637-654. ISSN 2044-124X

Abediniangerabi, B; Shahandashti, S M; Ahmadi, N and Ashuri, B (2017) Empirical investigation of temporal association between architecture billings index and construction spending using time-series methods. Journal of Construction Engineering and Management, 143(10): 04017080, ISSN 0733-9364

Abu Arqoub, M; Ghanbaripour, A N; Langston, C and Skulmoski, G (2023) Beyond design and delivery: Developing a model to measure end-user satisfaction (delight) in projects. Built Environment Project and Asset Management, 13(4), pp. 509-534. ISSN 2044-124X

Abu Arqoub, Muath (2022) Measuring end-user delight: Is success in project design and delivery enough? PhD thesis, Bond University, Australia.

Adesi, M.; Dramani, A.; Owusu-Manu, D. G.; Ahiabu, M. K. and Kissi, E. (2026) Canonical correlation analysis of employee well-being and performance among construction workers in Ghana. Journal of Engineering, Design and Technology, 24(4), pp. 1037-1056. ISSN 1726-0531

Al-Fahad, J Y (2012) Reform of building codes, regulations, administration and enforcement in Kuwait: within the legal, administrative, technical & social framework. PhD thesis, Loughborough University, UK.

Aleid, A B M and Godfrey Ochieng, E (2025) The interplay between cultural intelligence and project governance: Case of United Arab Emirates complex construction projects. International Journal of Construction Management, 25(14), pp. 1703-1715. ISSN 1562-3599

Alketbi, S R (2020) Effective implementation of value engineering in the housing construction programmes of the UAE. PhD thesis, University of Wolverhampton, UK.

Alnsour, J A M (2006) Planning and managing the built environment in the context of compliance with residential standards in Jordan. PhD thesis, University of Huddersfield, UK.

Alnusairat, S and Abu Qadourah, J (2025) Moving to green technologies: Acceptance and perception of architectural solar photovoltaic technology for residential buildings. Architectural Engineering and Design Management, 21(2), pp. 338-355. ISSN 1745-2007

Arayici, Y; Tokdemir, O B and Kassem, M (2023) A quantitative, evidence-based analysis of correlations between lean construction and building information modelling. Smart and Sustainable Built Environment, 12(5), pp. 975-1001. ISSN 2046-6099

Aye, S. Y.; Santoso, D. S. and Dodanwala, T. C. (2026) Bridging the gap: How generational work values influence job satisfaction and turnover intention in the construction industry. Journal of Engineering, Design and Technology, 24(4), pp. 920-942. ISSN 1726-0531

Badran, Y (2020) Analysis of construction and stakeholder risks for Public Private Partnership projects in developing countries: a comparative analysis using Artificial Neural Networks to determine the effect of poor stakeholder management and construction risks on the project's schedule (PPP vs. traditional projects). PhD thesis, University of Salford, UK.

Banwo, O O (2022) Development of a framework for building cost information management in Nigeria. PhD thesis, Coventry University, UK.

Barqawi, M; Chong, H Y and Lopez, R (2023) Effects of critical success factors, BIM implementation strategies, and barriers on employer-initiated delays. International Journal of Construction Management, 23(16), pp. 2788-2803. ISSN 1562-3599

Becker, T C (2012) Improving the predictability of construction project outcomes through project level indirect construction cost practices. PhD thesis, North Carolina State University, USA.

Bello, A O; Eje, D O; Idris, A; Semiu, M A and Khan, A A (2024) Drivers for the implementation of modular construction systems in the AEC industry of developing countries. Journal of Engineering, Design and Technology, 22(6), pp. 2043-2062. ISSN 1726-0531

Bevan, E A M and Yung, P (2015) Implementation of corporate social responsibility in Australian construction SMEs. Engineering, Construction and Architectural Management, 22(3), pp. 295-311. ISSN 0969-9988

Bin Sh Said, S A A (2020) The adoption of building information modelling in facilities management. PhD thesis, Oxford Brookes University, UK.

Brewer, G (2008) Innovation and attitude: mapping the profile of ICT decision-makers in architectural, engineering and construction firms. PhD thesis, University of Newcastle, Australia.

Cai, H; Kuczek, T; Dunston, P S and Li, S (2017) Correlating intelligent compaction data to in situ soil compaction quality measurements. Journal of Construction Engineering and Management, 143(8): 04017038, ISSN 0733-9364

Castillo, T; Alarcón, L F and Salvatierra, J L (2018) Effects of last planner system practices on social networks and the performance of construction projects. Journal of Construction Engineering and Management, 144(3): 04017120, ISSN 0733-9364

Challender, J (2017) Trust in collaborative construction procurement strategies. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(3), pp. 115-124. ISSN 17514304

Challender, J; Farrell, P and Sherratt, F (2016) Collaborative trust in UK further education (FE) procurement strategies. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Chan, I Y S and Leung, M Y (2011) Impact of stress on injury incidents among construction workers. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Charles, S H; Chang-Richards, A and Yiu, T W (2022) What do post-disaster reconstruction project success indicators look like? End-user's perspectives. International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 31-50. ISSN 1759-5916

Chen, Q; Jin, R and Soboyejo, A (2013) Understanding a contractor's regional variations in safety performance. Journal of Construction Engineering and Management, 139(6), pp. 641-653. ISSN 0733-9364

Chen, X; Ding, Y; Cory, C A; Hu, Y; Wu, K J and Feng, X (2021) A decision support model for subcontractor selection using a hybrid approach of QFD and AHP-improved grey correlation analysis. Engineering, Construction and Architectural Management, 28(6), pp. 1780-1806. ISSN 0969-9988

Chen, Y Q; Zhang, Y B and Zhang, S J (2014) Impacts of different types of owner-contractor conflict on cost performance in construction projects. Journal of Construction Engineering and Management, 140(6): 4014017, ISSN 0733-9364

Cheng, M Y; Vu, Q T; Dessalegn, M and Chen, J H (2025) Time-dependent rebar price prediction for procurement decision-making using bio-optimized deep machine learning. Engineering, Construction and Architectural Management, 32(12), pp. 7938-7971. ISSN 0969-9988

Chileshe, N; Edwards, D J; Kavishe, N and Haupt, T C (2020) Perception on challenges impacting bid decision of indigenous building contractors in Dar es Salaam, Tanzania. Journal of Engineering, Design and Technology, 18(6), pp. 1641-1662. ISSN 1726-0531

Chileshe, N and Kavishe, N (2020) Capacity building for Tanzanian public-private partnerships (PPPs) projects: Challenges and advocated solutions. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Chileshe, N and Kavishe, N (2022) Human capacity building strategies for improving PPP implementation in Tanzanian construction projects. Built Environment Project and Asset Management, 12(6), pp. 906-923. ISSN 2044-124X

Chileshe, N; Rameezdeen, R; Lehmann, S and Hosseini, M r (2014) Reverse logistics (RL) implementation among contractors in Australia: Practices and barriers. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Cleary, J (2024) Data driven insights into building project performance and outcomes through advanced data analytics. PhD thesis, Arizona State University, USA.

Comiskey, D; McKane, M; Jaffrey, A; Wilson, P and Mordue, S (2017) An analysis of data sharing platforms in multidisciplinary education. Architectural Engineering and Design Management, 13(4), pp. 244-261. ISSN 1745-2007

Dang, C N and Le-Hoai, L (2016) Critical success factors for implementation process of design-build projects in Vietnam. Journal of Engineering, Design and Technology, 14(1), pp. 17-32.

Dixit, M K (2017) Embodied energy and cost of building materials: Correlation analysis. Building Research & Information, 45(5), pp. 508-523. ISSN 0961-3218

Durdyev, S; Koc, K; Karaca, F and Gurgun, A P (2023) Strategies for implementation of green roofs in developing countries. Engineering, Construction and Architectural Management, 30(6), pp. 2481-2502. ISSN 0969-9988

Egwim, C N; Alaka, H; Toriola-Coker, L O; Balogun, H; Ajayi, S and Oseghale, R (2023) Extraction of underlying factors causing construction projects delay in Nigeria. Journal of Engineering, Design and Technology, 21(5), pp. 1323-1342. ISSN 1726-0531

Ekung, S; Opoku, A and Okonkwo, C (2023) Organisational learning and sustainability of service-based firms: A canonical correlation analysis. International Journal of Construction Management, 23(13), pp. 2160-2170. ISSN 1562-3599

El-Adaway, I H; Ali, G G; Abotaleb, I S and Barber, H M (2020) Studying the relationship between stock prices of publicly traded US construction companies and gross domestic product: Preliminary step toward construction-economy nexus. Journal of Construction Engineering and Management, 146(1): 04019087, ISSN 0733-9364

Elghamrawy, T; El-Rayes, K; Liu, L and Odeh, I (2012) Performance of temporary rumble strips at the edge of highway construction zones. Journal of Construction Engineering and Management, 138(8), pp. 923-930. ISSN 0733-9364

Fan, C L (2020) Defect risk assessment using a hybrid machine learning method. Journal of Construction Engineering and Management, 146(9): 04020102, ISSN 0733-9364

Federle, M O (1990) Substitutes for leadership in the environment of unionized construction carpenters. PhD thesis, University of Michigan, USA.

Fee, S T (2005) Sustainable construction practices: Contractors' perceptions of awareness and participation. PhD thesis, Indiana State University, USA.

Fergusson, K J (1993) Impact of integration on industrial facility quality. PhD thesis, Stanford University, USA.

Fernando, S; Panuwatwanich, K and Thorpe, D (2021) Introducing an innovation promotion model for construction projects. Engineering, Construction and Architectural Management, 28(3), pp. 728-746. ISSN 0969-9988

Frimpong, S; Sunindijo, R Y; Wang, C C; Hon, C K H; Boadu, E F and Dansoh, A (2025) Developing and validating a positive mental health scale for the global south construction industry: The construction industry positive mental health inventory (CI-pmhi). Construction Innovation, 25(1), pp. 78-103. ISSN 1471-4175

Fung, W P (2015) Building information modeling (BIM) capabilities in quantity surveying practice during pre-construction stage: The relationship with project performance. PhD thesis, University of Malaya, Malaysia.

Gbadegesin, J T and Aluko, B T (2014) Public private partnerships/private finance initiatives for financing infrastructure in public tertiary institutions in Nigeria. Built Environment Project and Asset Management, 4(2), pp. 199-215. ISSN 2044-124X

Geekiyanage, D and Ramachandra, T (2020) Nexus between running costs and building characteristics of commercial buildings: Hedonic regression modelling. Built Environment Project and Asset Management, 10(3), pp. 389-406. ISSN 2044-124X

Geekiyanage, D; Ramachandra, T and Rotimi, J O B (2017) A morphology-based model for forecasting cooling energy demand of condominium buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Ghosh, S; Nourihamedani, M; Reyes, M and Snyder, L (2024) Association between leading indicators of safety performance in construction projects. International Journal of Construction Education and Research, 20(2), pp. 121-135. ISSN 15578771

Gumusburun Ayalp, G (2022) Critical predictors of burnout among civil engineers at construction sites: A structural equation modelling. Engineering, Construction and Architectural Management, 29(9), pp. 3547-3573. ISSN 0969-9988

Gurmu, A T and Ongkowijoyo, C S (2020) Predicting construction labor productivity based on implementation levels of human resource management practices. Journal of Construction Engineering and Management, 146(3): 04019115, ISSN 0733-9364

Gurmu, Argaw (2017) An investigation into construction management practices influencing labour productivity in multi-storey building projects. PhD thesis, University of Melbourne, Australia.

Hanna, A S; Camlic, R; Peterson, P A and Lee, M J (2004) Cumulative effect of project changes for electrical and mechanical construction. Journal of Construction Engineering and Management, 130(6), pp. 762-771. ISSN 0733-9364

Hashem M. Mehany, M S and Guggemos, A (2015) Risk management for asphalt road construction and maintenance under performance-based contracts. International Journal of Construction Education and Research, 11(4), pp. 292-315. ISSN 1557-8771

Hee, C H S and Ling, F Y Y (2011) Strategies for reducing employee turnover and increasing retention rates of quantity surveyors. Construction Management and Economics, 29(10), pp. 1059-1072. ISSN 01446193

Heravi, G and Mohammadian, M (2021) Investigating cost overruns and delay in urban construction projects in Iran. International Journal of Construction Management, 21(9), pp. 958-968. ISSN 1562-3599

Hosein, R and Lewis, T M (2005) Quantifying the relationship between aggregate GDP and construction value added in a small petroleum rich economy: a case study of Trinidad and Tobago. Construction Management and Economics, 23(2), pp. 185-197. ISSN 01446193

Huang, C F and Lien, H C (2012) An empirical analysis of the influences of corporate social responsibility on organizational performance of Taiwan's construction industry: Using corporate image as a mediator. Construction Management and Economics, 30(4), pp. 263-275. ISSN 1466433X

Ikediashi, D I (2024) Facilities management strategic roles and services quality performance in Nigeria’s banking sector. Journal of Engineering, Design and Technology, 22(5), pp. 1591-1615. ISSN 1726-0531

Ikuabe, M; Oke, A E and Aigbavboa, C (2020) Impact of contractors' opportunism on construction project transaction costs: Construction professionals' perception. Journal of Financial Management of Property and Construction, 25(1), pp. 125-141. ISSN 1366-4387

Ilter, D (2012) Identification of the relations between dispute factors and dispute categories in construction projects. International Journal of Law in the Built Environment, 4(1), pp. 45-59. ISSN 1756-1450

Irajifar, L; Sipe, N and Alizadeh, T (2016) The impact of urban form on disaster resiliency: A case study of Brisbane and Ipswich, Australia. International Journal of Disaster Resilience in the Built Environment, 7(3), pp. 259-275. ISSN 1759-5916

Jafari, A and Akhavian, R (2019) Driving forces for the US residential housing price: A predictive analysis. Built Environment Project and Asset Management, 9(4), pp. 515-529. ISSN 2044-124X

Jayasuriya, Sajani (2018) A systematic stakeholder management framework for managing public private partnership projects in Australia. PhD thesis, RMIT University, Australia.

Kasimu, S; Chodokufa, K; Ntshabeleng, B M and Sophia, N (2025) Participative leadership and success of government construction projects in Uganda: Testing the participative leadership dimensions. Journal of Construction Business and Management, 7(2), pp. 33-44.

Kavishe, N; Chileshe, N and Jefferson, I (2019) Public-private partnerships in Tanzanian affordable housing schemes: Policy and regulatory issues, pitfalls and solutions. Built Environment Project and Asset Management, 9(2), pp. 233-247. ISSN 2044-124X

Kazar, G and Comu, S (2022) Exploring the relations between the physiological factors and the likelihood of accidents on construction sites. Engineering, Construction and Architectural Management, 29(1), pp. 456-475. ISSN 0969-9988

Kermanshachi, S (2016) Decision making and uncertainty analysis in success of construction projects. PhD thesis, Texas A&M University, USA.

Khawam, A A (2017) Project manager's role in safety performance of Saudi construction firms: A correlational study. PhD thesis, University of Phoenix, USA.

Kikwasi, G J (2023) Claims in construction projects: How causes are linked to effects? Journal of Engineering, Design and Technology, 21(6), pp. 1710-1724. ISSN 1726-0531

Kumar, A (1994) Development of a model for determining workzone illumination requirements during nighttime highway construction. PhD thesis, University of Florida, USA.

Kumi, L; Jeong, J; Jeong, J and Mun, H (2025) Development of multimodal recommender system for advancing design for safety with expert validation. Journal of Construction Engineering and Management, 151(9): 04025114, ISSN 0733-9364

Lam, T Y M and Siwingwa, N (2017) Risk management and contingency sum of construction projects. Journal of Financial Management of Property and Construction, 22(3), pp. 237-251. ISSN 1366-4387

Lansley, P (2013) Research assessment and the activity hypothesis. Engineering, Construction and Architectural Management, 20(1), pp. 7-28. ISSN 0969-9988

Lee, Y. J. (2026) Exploring peer leadership and organizational culture in R&D: A social network and machine learning approach in South korea's construction industry. Construction Innovation, 26(6), ISSN 1471-4175

Leung, M Y; Chan, Y S and Chong, A M L (2010) Chinese values and stressors of construction professionals in Hong Kong. Journal of Construction Engineering and Management, 136(12), pp. 1289-1298. ISSN 0733-9364

Leung, M Y; Chan, Y S and Olomolaiye, P (2008) Impact of stress on the performance of construction project managers. Journal of Construction Engineering and Management, 134(8), pp. 644-652. ISSN 0733-9364

Leung, M Y; Chen, D and Yu, J (2008) Demystifying moderate variables of the interrelationships among affective commitment, job performance, and job satisfaction of construction professionals. Journal of Construction Engineering and Management, 134(12), pp. 963-971. ISSN 0733-9364

Leung, M Y; Liu, A M M and Wong, M M K (2006) Impact of stress-coping behaviour on estimation performance. Construction Management and Economics, 24(1), pp. 55-67. ISSN 01446193

Leung, M Y; Ng, S T; Skitmore, M and Cheung, S O (2005) Critical stressors influencing construction estimators in Hong Kong. Construction Management and Economics, 23(1), pp. 33-44. ISSN 01446193

Leung, M Y; Olomolaiye, P; Chong, A and Lam, C C Y (2005) Impacts of stress on estimation performance in Hong Kong. Construction Management and Economics, 23(9), pp. 891-903. ISSN 01446193

Leung, M Y; Skitmore, M and Chan, Y S (2007) Subjective and objective stress in construction cost estimation. Construction Management and Economics, 25(10), pp. 1063-1075. ISSN 1466433X

Leung, M Y; Yu, J and Chong, M L A (2016) Effects of stress and commitment on the performance of construction estimation participants in Hong Kong. Journal of Construction Engineering and Management, 142(2): 04015081, ISSN 0733-9364

Leung, M Y; Zhang, H and Skitmore, M (2008) Effects of organizational supports on the stress of construction estimation participants. Journal of Construction Engineering and Management, 134(2), pp. 84-93. ISSN 0733-9364

Li, S and Liu, M (2023) Reasonable kitchen space for urban residences: Based on an investigation in Beijing. Building Research & Information, 51(8), pp. 881-896. ISSN 0961-3218

Lim, J N and Ofori, G (2007) Classification of innovation for strategic decision making in construction businesses. Construction Management and Economics, 25(9), pp. 963-978. ISSN 1466433X

Ling, F Y Y (2004) Key determinants of performance of design-bid-build projects in Singapore. Building Research & Information, 32(2), pp. 128-139. ISSN 0961-3218

Ling, F Y Y and Tran, P Q (2012) Effects of interpersonal relations on public sector construction contracts in Vietnam. Construction Management and Economics, 30(12), pp. 1087-1101. ISSN 1466433X

Maduka, N S (2017) The role of knowledge management in assisting key stakeholders in making informed decisions in delivering sustainable retrofitted building projects. PhD thesis, Northumbria University, UK.

Mahamadu, A-M (2017) Development of a decision support framework to aid selection of construction supply chain organisations for BIM-enabled projects. PhD thesis, University of the West of England, Bristol, UK.

Manamgoda, M G N; Perera, B A K S and Perera, C S R (2018) Impact of interest rates of bank loans on road construction: The case of Sri Lanka. Journal of Engineering, Design and Technology, 16(4), pp. 518-532. ISSN 1726-0531

Masitenyane, L A (2020) Dimensions and outcomes of buyer-seller relationship intentions for concrete products in the construction environment. DTech thesis, Vaal University of Technology, South Africa.

Mbugua, L M (2000) A methodology for evaluating the business performance of UK construction companies. PhD thesis, University of Wolverhampton, UK.

Mehany, M S H M (2014) Delay-caused claims in infrastructure projects under design-bid-build delivery systems. PhD thesis, Colorado State University, USA.

Menoka, B (2014) Stakeholder engagement and sustainability-related project performance in construction. PhD thesis, Liverpool John Moores University, UK.

Morris, Austin J (2022) Project management maturity and project success in NSW local government. PhD thesis, University of Technology Sydney, Australia.

Mselle, J and Sanga, S A (2018) Constraints facing incremental housing construction in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 23(1), pp. 1-20. ISSN 1823-6499

Mubarak, A M (2018) The relationship between determinants of risk governance assurance and efficacy of the public projects in the government of Dubai from the perspective of internal audit function. PhD thesis, British University in Dubai, UAE.

Ng, Y. Y.; Ma, Q. and Yam, M. C. H. (2026) Optimizing subcontractor selection: A dual-model AHP framework for aligning client and contractor priorities in construction. Journal of Engineering, Design and Technology, 24(4), pp. 869-893. ISSN 1726-0531

Nguyen, P H D; Lines, B C and Tran, D Q (2018) Best-value procurement in design-bid-build construction projects: Empirical analysis of selection outcomes. Journal of Construction Engineering and Management, 144(10): 04018093, ISSN 0733-9364

Noor, K; Siddiqui, M A and Syed, A I (2025) Optimization of specific energy consumption in cnc turning of a hardened alloy steel roll at low cutting speeds. Journal of Engineering, Design and Technology, 23(2), pp. 368-385. ISSN 1726-0531

Oates, D and Sullivan, K T (2012) Postoccupancy energy consumption survey of Arizona's LEED new construction population. Journal of Construction Engineering and Management, 138(6), pp. 742-750. ISSN 0733-9364

Obeidat, B and Zahrawi, R (2024) Exploring the impact of built environment design on oncology inpatient rooms: A single-based study of King Abdullah University Hospital. Architectural Engineering and Design Management, 20(4), pp. 972-995. ISSN 1745-2007

Obeng-Ahenkora, N. K.; Danso, H. and Kheni, N. A. (2026) Principal component analysis of factors influencing the choice of procurement methods for the procurement of construction materials in Ghana. Engineering, Construction and Architectural Management, 33(7), pp. 5300-5317. ISSN 0969-9988

Oke, A E; Arowoiya, V A; Chan, M and Oyediran, A (2025) Digital twin technology (DTT) in a developing construction industry: Evaluation of the awareness and usage among professionals in Nigeria. International Journal of Construction Management, 25(11), pp. 1313-1323. ISSN 1562-3599

Olatunji, O A (2010) The impact of oil price regimes on construction cost in Nigeria. Construction Management and Economics, 28(7), pp. 747-759. ISSN 1466433X

Ospina Alvarado, A M (2011) Unified framework for construction project integration and its potential association with project performance. PhD thesis, Georgia Institute of Technology, USA.

Ospina-Alvarado, A; Castro-Lacouture, D and Roberts, J S (2016) Unified framework for construction project integration. Journal of Construction Engineering and Management, 142(7): 4016019, ISSN 0733-9364

Owusu-Manu, D G; Babon-Ayeng, P; Kissi, E; Edwards, D J; Okyere-Antwi, D and Elgohary, H (2023) Green construction and environmental performance: An assessment framework. Smart and Sustainable Built Environment, 12(3), pp. 565-583. ISSN 2046-6099

Oyedele, L; Jaiyeoba, B and Fadeyi, M (2003) Design factors influencing quality of building projects in Nigeria: Consultants' perception. Construction Economics and Building, 3(2), pp. 25-32. ISSN 2204-9029

Oyewole, M O; Komolafe, M O and Gbadegesin, J T (2023) Understanding stakeholders' opinion and willingness on the adoption of sustainable residential property features in a developing property market. International Journal of Construction Management, 23(2), pp. 358-370. ISSN 1562-3599

Pamidimukkala, A.; Kermanshachi, S. and Adepu, N. (2026) Identifying critical factors that affected construction project performance during COVID-19. International Journal of Building Pathology and Adaptation, 44(3), pp. 553-566. ISSN 2398-4708

Panwar, A and Jha, K N (2021) Integrating quality and safety in construction scheduling time-cost trade-off model. Journal of Construction Engineering and Management, 147(2): 04020160, ISSN 0733-9364

Paris, D E (2002) A residential satisfaction decision support system for affordable housing. PhD thesis, Georgia Institute of Technology, USA.

Pellicer, T M; Pellicer, E and Eaton, D (2009) A macroeconomic regression analysis of the European construction industry. Engineering, Construction and Architectural Management, 16(6), pp. 573-597. ISSN 0969-9988

Petersen, A K (2005) Integrating risk management into the undergraduate construction management curriculum: An investigation into the effect of zero tolerance, 360-degree feedback and competition within a world wide web assisted construction project-based learning environmen. PhD thesis, University of Portsmouth, UK.

Proverbs, D G; Holt, G D and Olomolaiye, P O (1999) Factors in formwork selection: A comparative investigation. Building Research & Information, 27(2), pp. 109-119. ISSN 0961-3218

Qi, H; Zhou, Z; Irizarry, J; Deng, X; Yang, Y; Li, N and Zhou, J (2025) Modification of HFACS model for path identification of causal factors of collapse accidents in the construction industry. Engineering, Construction and Architectural Management, 32(7), pp. 4718-4745. ISSN 0969-9988

Qian, Q K; Fan, K and Chan, E H W (2016) Regulatory incentives for green buildings: Gross floor area concessions. Building Research & Information, 44(5-6), pp. 675-693. ISSN 0961-3218

Quaigrain, R A; Owusu-Manu, D; Edwards, D J and Danquah, D D (2026) Investigating the relationship between organizational mindset orientation and project performance of large organizations in the Ghanaian construction industry. International Journal of Construction Education and Research, 22(1), pp. 2-26. ISSN 1557-8771

Raoufi, M and Fayek, A R (2018) Key moderators of the relationship between construction crew motivation and performance. Journal of Construction Engineering and Management, 144(6): 04018047, ISSN 0733-9364

Renault, B Y; Agumba, J N and Ansary, N (2020) Correlation analysis between risk measurement and project success of small and medium contractors in Gauteng, South Africa. Journal of Construction Business and Management, 4(2), pp. 34-45. ISSN 2521-0165

Retamal, F; Salazar, L A and Alarcón, L F (2022) Online monitoring and implementation of commitment management performance and its impact on project planning in four construction projects. Journal of Construction Engineering and Management, 148(10): 05022011, ISSN 0733-9364

Rodriguez, J L (2020) Psychosocial safety climate, psychosocial safety behavior, and injury reporting among Latino and Non-Latino construction workers in New York city: A correlational study. PhD thesis, Northcentral University, USA.

Rotimi, J O B and Ramanayaka, C D D (2015) Analysis of the influence of a strategy-led planning approach on successful construction project implementation. Construction Economics and Building, 15(2), pp. 13-30. ISSN 2204-9029

Rowlinson, S M (1988) An analysis of factors affecting project performance in industrial buildings with particular reference to design build contracts. PhD thesis, Brunel University, UK.

Saini, M (2015) A framework for transferring and sharing tacit knowledge in construction supply chains within lean and agile processes. PhD thesis, University of Salford, UK.

Saini, M; Arif, M and Kulonda, D J (2018) Critical factors for transferring and sharing tacit knowledge within lean and agile construction processes. Construction Innovation, 18(1), pp. 64-89. ISSN 1471-4175

Saini, M; Arif, M and Kulonda, D J (2019) Challenges to transferring and sharing of tacit knowledge within a construction supply chain. Construction Innovation, 19(1), pp. 15-33. ISSN 1471-4175

Salminen, J (2005) Measuring performance and determining success factors of construction sites. PhD thesis, Helsinki University of Technology, Finland.

Sandagomika, H; Shringi, A; Mohandes, S R; Kineber, A F; Bazli, M and Arashpour, M (2024) Mixed reality-based approach for minimizing time uncertainty in prefabrication. Journal of Construction Engineering and Management, 150(11): 04024147, ISSN 0733-9364

Satish, S. and Umar, T. (2026) Bridging innovation and practice: Assessing the readiness for 3D printing in construction. Engineering, Construction and Architectural Management, 33(7), pp. 6014-6038. ISSN 0969-9988

Shafei, H; Rahman, R A and Lee, Y S (2025) Evaluating Construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan. Journal of Engineering, Design and Technology, 23(4), pp. 1211-1242. ISSN 1726-0531

Sharma, A and Kumar, A (2024) Adaptive thermal comfort of residential buildings in the composite climatic region of India: a field study. Architectural Engineering and Design Management, 20(5), pp. 1238-1259. ISSN 1745-2007

Shokri-Ghasabeh, M and Chileshe, N (2014) Knowledge management: Barriers to capturing lessons learned from Australian construction contractors' perspectives. Construction Innovation, 14(1), pp. 108-134. ISSN 1471-4175

Sindhu, J; Choi, K; Lavy, S; Rybkowski, Z K; Bigelow, B F and Li, W (2018) Effects of front-end planning under fast-tracked project delivery systems for industrial projects. International Journal of Construction Education and Research, 14(3), pp. 163-178. ISSN 1557-8771

Siriwardana, C S A (2016) An integrated framework for worker planning and supervision in construction. PhD thesis, University of Calgary, Canada.

Soliman, E and Altabtai, H (2023) Employee motivation in construction companies in Kuwait. International Journal of Construction Management, 23(10), pp. 1665-1674. ISSN 1562-3599

Swai, L (2022) Development of a conceptual framework for enhancing payment practices in the UK construction industry. PhD thesis, Coventry University, UK.

Sözen, Z and Kayahan, O (2001) Correlates of the length of the relationship between main and specialist trade contractors in the construction industry. Construction Management and Economics, 19(2), pp. 131-133. ISSN 01446193

Tan, Y (2009) Contractor's competitiveness and competitive strategy in Hong Kong. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Tarekegn Gurmu, A (2023) Preconstruction phase management practices enhancing labor productivity in multistory building projects. Journal of Construction Engineering and Management, 149(6): 04023032, ISSN 0733-9364

Teo, P and Love, P E D (2017) Re-examining the association between quality and safety performance in construction: From heterogeneous to homogeneous datasets. Journal of Construction Engineering and Management, 143(6): 04017011, ISSN 0733-9364

Tissaveerasinghe, S P; Chathuranga, N and Siriwardana, C (2025) Compressed stabilised earth blocks as a sustainable building material: Investigation of customer purchase intentions. Built Environment Project and Asset Management, 15(4), pp. 808-826. ISSN 2044-124X

Titirla, M and Aretoulis, G (2019) Neural network models for actual duration of Greek highway projects. Journal of Engineering, Design and Technology, 17(6), pp. 1323-1339. ISSN 1726-0531

Tong, R; Zhang, N; Wang, X and Zhao, H (2020) Impact of safety management system on safety performance: The mediating role of safety responsibility. Engineering, Construction and Architectural Management, 27(10), pp. 3155-3170. ISSN 0969-9988

Tseladikae, T.; Agumba, J.; Ochieng, G.; Adebowale, O. J. and Edwards, D. (2026) Correlation analysis of project management practices and performance outcomes in social housing projects. International Journal of Construction Management, 26(10), pp. 2085-2100. ISSN 1562-3599

Tugrul Okbaz, F (2025) Evaluation of space efficiency criteria in high-rise buildings based on functions: A case study of türkiye. Architectural Engineering and Design Management, 21(1), pp. 60-77. ISSN 1745-2007

Venkataraman, V (2017) Investigating the impact of project management factors on green building project delivery using link analysis and system dynamics techniques. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Verwey, J; Cumberlege, R and Crafford, G J (2023) Exploring the interplay between quantity surveyors' conflict-handling styles and personality traits. Journal of Construction Business and Management, 6(2), pp. 38-49. ISSN 2521-0165

Walker, D H T (1997) Choosing an appropriate research methodology. Construction Management and Economics, 15(2), pp. 149-159. ISSN 01446193

Wang, D; Arditi, D and Damci, A (2017) Construction project managers' motivators and human values. Journal of Construction Engineering and Management, 143(4): 04016115, ISSN 0733-9364

Wang, T; Tang, W; Qi, D; Shen, W and Huang, M (2016) Enhancing design management by partnering in delivery of international EPC projects: Evidence from Chinese construction companies. Journal of Construction Engineering and Management, 142(4): 04015099, ISSN 0733-9364

Wickramaratne, S; Ruwanpura, J; Ranasinghe, U; Walawe-Durage, S; Adikariwattage, V and Wirasinghe, S C (2012) Ranking of natural disasters in Sri Lanka for mitigation planning. International Journal of Disaster Resilience in the Built Environment, 3(2), pp. 115-132. ISSN 1759-5916

Worlobah, A M (2025) Investigating the implementation of building information modeling in the construction sector in Liberia. PhD thesis, National University, USA.

Wu, H; Qian, Q K; Straub, A and Visscher, H J (2022) Factors influencing transaction costs of prefabricated housing projects in China: Developers' perspective. Engineering, Construction and Architectural Management, 29(1), pp. 476-501. ISSN 0969-9988

Wuni, I Y; Shen, G Q and Antwi-Afari, M F (2023) Exploring the design risk factors for modular integrated construction projects. Construction Innovation, 23(1), pp. 213-228. ISSN 1471-4175

Xie, B; Wang, Z; Xu, Y and Cui, L (2025) How does bricolage drive knowledge innovation in engineering project organizations? Engineering, Construction and Architectural Management, 32(12), pp. 8571-8591. ISSN 0969-9988

Yang, X L (2010) Research on general contracter and subcontractor cooperative management in construction. PhD thesis, Harbin Institute of Technology, China.

Yu, J; Ma, G; Ding, W; Mao, J and Wang, J (2022) Structural model for the relationships between age-friendly communities and quality of life of older adults in hefei, China. Engineering, Construction and Architectural Management, 29(3), pp. 1376-1395. ISSN 0969-9988

Yuliana, D. K.; Tiwi, D. A.; Akhirianto, N. A.; Andikasari, L. Y.; Frederik, M. C. G.; Marwanta, B.; Riyandari, R.; Qonita, Z.; Sakya, A. E.; Souisa, M. and Kayadoe, F. J. (2026) Bridging the resource mobilization gap in tsunami preparedness: Evidence from small-island communities in ambon bay, Indonesia. International Journal of Disaster Resilience in the Built Environment, 17(3), pp. 446-465. ISSN 1759-5908

Yılmaz, F (2023) Analysis of the interaction between safety measures and workers' safety awareness from the construction workers' perspective. Engineering, Construction and Architectural Management, 30(1), pp. 41-55. ISSN 0969-9988

Zamani, S H; Rahman, R A; Yusof, L M and Naganathan, H (2025) Well building for developing countries: Critical design criteria for residential buildings in Malaysia. Journal of Engineering, Design and Technology, 23(5), pp. 1519-1540. ISSN 1726-0531

Zhang, J and Jiang, S (2026) Unsafe behaviors in workers at heights: A spacetime-based coupling analysis method and its safety implications. Journal of Construction Engineering and Management, 152(1): 04025233, ISSN 0733-9364

Zhang, S.; Duan, J. and Sunindijo, R. Y. (2026) Mental health outcomes and psychosocial hazards experienced by construction professionals with different demographic characteristics during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 33(4), pp. 3424-3451. ISSN 0969-9988

Zhu, Y; Ahmad, I and Wang, L (2009) Estimating work zone road user cost for alternative contracting methods in highway construction projects. Journal of Construction Engineering and Management, 135(7), pp. 601-608. ISSN 0733-9364

Zuppa, D (2009) Model for developing trust in construction management. PhD thesis, University of Florida, USA.