Items with Index Term: construction technology

Abankwa, Derek Asante (2021) What drives technology adaptation in construction firms? An investigation of the antecedents, adaptive behaviours, and outcomes. PhD thesis, University of Hong Kong, Hong Kong.

Abd El Halim, A E H O and Haas, R (2004) Process and case illustration of construction innovation. Journal of Construction Engineering and Management, 130(4), pp. 570-575. ISSN 0733-9364

Abdelaal, A; Ma, J; Zhang, H; Shobeiri, V and Xie, Y M (2026) Bio-stabilized modular rammed earth blocks for sustainable and aesthetic construction. Construction Innovation, 26(9), pp. 1-20. ISSN 1471-4175

AbdulLateef, O; Sanmargaraja, S; Oni, O; Anavhe, P and Mewomo, C M (2024) An association rule mining model for the application of construction technologies during COVID-19. International Journal of Construction Management, 24(4), pp. 443-453. ISSN 1562-3599

Aboneh, A and Mahesh, G (2025) Understanding the key factors of operating environment for small and medium contractors in the developing economies: The case of Ethiopia. Journal of Engineering, Design and Technology, 23(1), pp. 69-87. ISSN 1726-0531

Agyekum, K; Goodier, C and Oppon, J A (2022) Key drivers for green building project financing in Ghana. Engineering, Construction and Architectural Management, 29(8), pp. 3023-3050. ISSN 0969-9988

Ahmed, A M; Sayed, W; Asran, A and Nosier, I (2023) Identifying barriers to the implementation and development of sustainable construction. International Journal of Construction Management, 23(8), pp. 1277-1288. ISSN 1562-3599

Ahmed Memon, Z; Zaimi, M A M and Mustaffar, M (2007) A systematic procedure for developing the 3D model to evaluate the construction project progress. Construction Innovation, 7(2), pp. 187-199. ISSN 1471-4175

Akturk, B and Cakmak, P (2025) Digital twins for enhanced construction project management. Smart and Sustainable Built Environment, 14(7), pp. 2176-2200. ISSN 2046-6099

Al Hattab, M; Zankoul, E; Barakat, M and Hamzeh, F (2018) Crane overlap and operational flexibility: Balancing utilization, duration, and safety. Construction Innovation, 18(1), pp. 43-63. ISSN 1471-4175

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Allouche, E N (2001) A decision-support model for selection of a trenchless construction method. PhD thesis, University of Alberta, Canada.

Almalki, M (2024) Accelerated wastewater pipeline construction. PhD thesis, Syracuse University, USA.

Almatari, H A Q; Chan, M and Masrom, M A N (2024) Factors inhibiting the adoption of industrial revolution 4.0 in malaysian construction industry. Smart and Sustainable Built Environment, 13(4), pp. 1041-1065. ISSN 2046-6099

Alsugair, A M (1992) An intelligent resource allocation system. PhD thesis, Texas A&M University, USA.

Ameh, O J and Odusami, K T (2014) Nigerian construction professional's education and deficiencies in the area of project management. Journal of Construction in Developing Countries, 19(1), pp. 1-14. ISSN 1823-6499

Antino, P (2021) Interpreting the Party Wall etc Act 1996 and the implications for building below ground. PhD thesis, Anglia Ruskin University, UK.

Aouad, G F and Barrett, P S (1998) The feasibility of using hybrid concrete structures within the context of cost and time. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Arditi, D and Mochtar, K (2000) Trends in productivity improvement in the US construction industry. Construction Management and Economics, 18(1), pp. 15-27. ISSN 01446193

Ariaratnam, S T; Lueke, J S and Allouche, E N (1999) Utilization of trenchless construction methods by Canadian municipalities. Journal of Construction Engineering and Management, 125(2), pp. 76-86. ISSN 0733-9364

Ariyachandra, M R M F; Jayasena, H S and Perera, B A K S (2022) Competencies expected from an information manager working in BIM based projects. International Journal of Construction Education and Research, 18(1), pp. 49-66. ISSN 1557-8771

Assaad, R; El-Adaway, I H; Hastak, M and Needy, K L (2020) Commercial and legal considerations of offsite construction projects and their hybrid transactions. Journal of Construction Engineering and Management, 146(12): 05020019, ISSN 0733-9364

Ayinla, K O; Cheung, F and Tawil, A R (2020) Demystifying the concept of offsite manufacturing method: Towards a robust definition and classification system. Construction Innovation, 20(2), pp. 223-246. ISSN 1471-4175

Azimzadeh, F (2000) COSTEFF model: A computer-based knowledge source for improving cost effectiveness of engineering and construction projects. DEng thesis, Lamar University - Beaumont, USA.

Bademosi, F M (2019) Robotics and automation in construction: Assessment of knowledge, skills and abilities necessary for talent cultivation in industry and education. PhD thesis, University of Florida, USA.

Bajere, P A (1996) Maintenance conditions and occupant behavior in government-provided housing in Lagos, Nigeria. DIT thesis, University of Northern Iowa, USA.

Banihashemi, S; Assadimoghadam, A; Hajirasouli, A; LeNguyen, K and Mohandes, S R (2025) Parametric design in construction: A new paradigm for quality management and defect reduction. International Journal of Construction Management, 25(13), pp. 1534-1551. ISSN 1562-3599

Bannholzer, Dominic (2020) Leerstellenmanagement in der planung und steuerung des change-managements von bautechnologieunternehmen: Eine generelle explikation, wie die autopoietische fähigkeit von unternehmen durch lücken im veränderungsprozess positiv potenziert werden kann. PhD thesis, Middlesex University, UK.

Barros, Mércia Maria Semensato Bottura de (1996) A model to introduce innovative technologies into the building construction. PhD thesis, Universidade de São Paulo, Brazil.

Bataglin, Fernanda Saidelles (2023) Prescriptive conceptual framework for planning and controlling engineer-to-order industrialized building systems. PhD thesis, Universidade Federal do Rio Grande do Sul, Brazil.

Besklubova, S; Skibniewski, M J and Zhang, X (2021) Factors affecting 3D printing technology adaptation in construction. Journal of Construction Engineering and Management, 147(5): 2034, ISSN 0733-9364

Bon, R and Pietroforte, R (1990) Historical comparison of construction sectors in the United States, Japan, Italy and Finland using input–output tables. Construction Management and Economics, 8(3), pp. 233-247. ISSN 01446193

Bon, R and Pietroforte, R (1993) New construction versus maintenance and repair construction technology in the US since World War II. Construction Management and Economics, 11(2), pp. 151-162. ISSN 01446193

Borges, S K (1987) Roller-compacted concrete pavement: U.S. Air force decision model. Journal of Construction Engineering and Management, 113(3), pp. 480-487. ISSN 0733-9364

Bosch-Sijtsema, P; Claeson-Jonsson, C; Johansson, M and Roupe, M (2021) The hype factor of digital technologies in AEC. Construction Innovation, 21(4), pp. 899-916. ISSN 1471-4175

Brockmann, C; Brezinski, H and Erbe, A (2016) Innovation in construction megaprojects. Journal of Construction Engineering and Management, 142(11): 04016059, ISSN 0733-9364

Cai, J; Li, Z; Dou, Y and Li, T (2023) Investigating adoption of high prefabrication level technologies for enterprises: An integrated model. Building Research & Information, 51(6), pp. 648-666. ISSN 0961-3218

Cai, J; Li, Z; Dou, Y; Li, T and Yuan, M (2023) Understanding adoption of high off-site construction level technologies in construction based on the TAM and ttf. Engineering, Construction and Architectural Management, 30(10), pp. 4978-5006. ISSN 0969-9988

Carrillo, P (1994) Technology transfer: A survey of international construction companies. Construction Management and Economics, 12(1), pp. 45-51. ISSN 01446193

Cassandro, J; Mirarchi, C; Gholamzadehmir, M and Pavan, A (2025) Advancements and prospects in building information modeling (BIM) for construction: A review. Engineering, Construction and Architectural Management, 32(9), pp. 6006-6026. ISSN 0969-9988

Chamikara, P B S; Perera, B A K S and Rodrigo, M N N (2020) Competencies of the quantity surveyor in performing for sustainable construction. International Journal of Construction Management, 20(3), pp. 237-251. ISSN 1562-3599

Chao, L C and Skibniewski, M J (1995) Neural network method of estimating construction technology acceptability. Journal of Construction Engineering and Management, 121(1), pp. 130-142. ISSN 0733-9364

Chao, L C and Skibniewski, M J (1998) Fuzzy logic for evaluating alternative construction technology. Journal of Construction Engineering and Management, 124(4), pp. 297-304. ISSN 0733-9364

Chao, L-C (1994) An adaptive approach to evaluation of implementation prospects of new construction technologies. PhD thesis, Purdue University, USA.

Chau, K W (1998) The implications of the difference in the growth rates of the prices of building resources and outputs in Hong Kong. Engineering, Construction and Architectural Management, 5(1), pp. 38-50. ISSN 0969-9988

Chung, J K H; Shen, G Q P; Leung, B Y P; Hao, J J L; Hills, M J; Fox, P W and Zou, P X W (2005) Using e-learning to deliver construction technology for undergraduate students. A case study in Hong Kong. Architectural Engineering and Design Management, 1(4), pp. 295-308. ISSN 1745-2007

Cockerill, J E (1993) The construction industry in belfast 1800-1914. PhD thesis, Queen's University Belfast, UK.

Darwish, M; Elsayed, A Y and Nassar, K (2018) Design and constructability of a novel funicular arched steel truss falsework. Journal of Construction Engineering and Management, 144(3): 04018002, ISSN 0733-9364

Das, P K (2006) A sustainability impact-assessment tool for selected building technologies in rural India: the case of the Andhra Pradesh primary education project. PhD thesis, University of Newcastle upon Tyne, UK.

Ding, Z; Jiang, S; Ng, F and Zhu, M (2017) A new TRIZ-based patent knowledge management system for construction technology innovation. Journal of Engineering, Design and Technology, 15(4), pp. 456-470.

Dou, Y; Yan, X; Dong, B; Zhong, L and Lin, H (2026) Predicting the interorganizational diffusion of prefabricated construction technology: Agent-based modeling and simulation. Journal of Construction Engineering and Management, 152(3): 04025266, ISSN 0733-9364

Dou, Y; Xue, X; Wu, C; Luo, X and Wang, Y (2020) Interorganizational diffusion of prefabricated construction technology: Two-stage evolution framework. Journal of Construction Engineering and Management, 146(9): 04020114, ISSN 0733-9364

Du, W; M.E. Sepasgozar, S; Khan, A; Shirowzhan, S and Garzon Romero, J (2025) Developing an interactive pile training module for construction risk management and gaging users' intentions. Construction Innovation, 25(3), pp. 893-911. ISSN 1471-4175

Ebekozien, A and Samsurijan, M S (2024) Incentivisation of digital technology takers in the construction industry. Engineering, Construction and Architectural Management, 31(4), pp. 1373-1390. ISSN 0969-9988

Egan, C M (1989) An evaluation of the effectiveness of the Mankato State university construction management program. EdD thesis, University of Alabama, USA.

Elijah, O O and Oluwasuji, D J (2019) An evaluation of training needs of the Nigerian construction professionals in adopting building information modelling. Journal of Construction in Developing Countries, 24(2), pp. 63-81. ISSN 1823-6499

Erman, E (2002) Timber joint design: The geometric breakdown method. Building Research & Information, 30(6), pp. 446-469. ISSN 0961-3218

Esmaeili, B (2012) Identifying and quantifying construction safety risks at the attribute level. PhD thesis, University of Colorado at Boulder, USA.

Forbes, C (2018) Rebuilding Nepal: Traditional and modern approaches, building or diminishing resilience? International Journal of Disaster Resilience in the Built Environment, 9(3), pp. 218-229. ISSN 1759-5916

Foskett, F. and Alwisy, A. (2026) Socio-industrial analysis of cross-sector robotics adoption obstacles for light-gauge steel construction. Engineering, Construction and Architectural Management, pp. 1-40. ISSN 0969-9988

Foskett, F. and Alwisy, A. (2026) Socio-industrial analysis of cross-sector robotics adoption obstacles for light-gauge steel construction. Engineering, Construction and Architectural Management, pp. 1-40. ISSN 0969-9988

Francis, A; Padmanabhan, V and Thomas, A (2025) A life cycle assessment-based case study analysis of the sustainability of "vernacular" versus contemporary construction techniques. Engineering, Construction and Architectural Management, 32(9), pp. 6187-6212. ISSN 0969-9988

Freitas, Oracilda Aparecida de (2023) Corporate sustainability in construction and its socio-spatial implications: The example of MRV Engenharia in Uberlândia/MG. PhD thesis, Universidade Federal de Uberlândia, Brazil.

Gambatese, J A and Hallowell, M (2011) Factors that influence the development and diffusion of technical innovations in the construction industry. Construction Management and Economics, 29(5), pp. 507-517. ISSN 1466433X

Garg, R; Chhikara, R; Singh, R; Agrawal, G; Talwar, V and Mehra, V (2021) A qualitative study to understand the factors affecting the adoption of glass fiber-reinforced gypsum (gfrg) as a sustainable building technology: Insights from Indian construction industry. Construction Innovation, 21(2), pp. 321-344. ISSN 1471-4175

Ghanbari Parsa, A R (1989) The interaction of planning policies and construction technologies in Iran with reference to China & Japan. PhD thesis, University of Newcastle upon Tyne, UK.

Ghansah, F A; Owusu-Manu, D G; Ayarkwa, J; Edwards, D J and Hosseini, M R (2021) Exploration of latent barriers inhibiting project management processes in adopting smart building technologies (sbts) in the developing countries. Construction Innovation, 21(4), pp. 685-707. ISSN 1471-4175

Ginigaddara, B; Gajendran, T and Beard, C (2025) A critical review of quantity surveying education in an offsite construction perspective: strategies for up-skilling. Construction Innovation, 25(4), pp. 1058-1084. ISSN 1471-4175

Ginigaddara, B; Perera, S; Feng, Y and Rahnamayiezekavat, P (2022) An evaluation of offsite construction skill profiles. Journal of Financial Management of Property and Construction, 27(1), pp. 16-28. ISSN 1366-4387

Goodrum, P M; Haas, C T; Caldas, C; Zhai, D; Yeiser, J and Homm, D (2011) Model to predict the impact of a technology on construction productivity. Journal of Construction Engineering and Management, 137(9), pp. 678-688. ISSN 0733-9364

Goulding, J S; Pour Rahimian, F; Arif, M and Sharp, M D (2015) New offsite production and business models in construction: Priorities for the future research agenda. Architectural Engineering and Design Management, 11(3), pp. 163-184. ISSN 1745-2007

Graser, K; Kahlert, A and Hall, D M (2021) Dfab house: Implications of a building-scale demonstrator for adoption of digital fabrication in AEC. Construction Management and Economics, 39(10), pp. 853-873. ISSN 01446193

Gumusburun Ayalp, G and Ay, I (2021) Model validation of factors limiting the use of prefabricated construction systems in Turkey. Engineering, Construction and Architectural Management, 28(9), pp. 2610-2636. ISSN 0969-9988

Gurmu, A; Kamardeen, I and Mahmood, M N (2023) Blended pedagogical model for effective teaching of building measurement and estimating. International Journal of Construction Management, 23(7), pp. 1138-1147. ISSN 1562-3599

Haltenhoff, C E (1986) Educating professional construction managers. Journal of Construction Engineering and Management, 112(2), pp. 153-162. ISSN 0733-9364

Hampson, K and Fischer, M (1997) Structural designs and construction technologies for California highway bridges. Journal of Construction Engineering and Management, 123(3), pp. 269-275. ISSN 0733-9364

Hampson, K D (1994) Technology strategy and competitive performance: A study of bridge construction. PhD thesis, Stanford University, USA.

Han, T; Zhou, G; Xie, Y; Qiao, F; Feng, J; Liu, P and Wang, S (2026) Time-cost trade-off optimization in ultralong tunnel construction based on working face planning. Journal of Construction Engineering and Management, 152(3): 04026007, ISSN 0733-9364

Harkola, J (1995) Diffusion of construction technology: In a Japanese firm. PhD thesis, Stanford University, USA.

Harris, R B (1992) A challenge for research. Journal of Construction Engineering and Management, 118(3), pp. 422-434. ISSN 0733-9364

Hashemi, A (2009) Construction technology transfer: an assessment of the relevance of modern methods of construction to housing shortages in Iran. PhD thesis, Cardiff University, UK.

Hassane Assaad, R (2021) Innovative modeling and management of infrastructure systems, engineering and construction operations, and offsite construction technology using computational data analytics. PhD thesis, Missouri University of Science and Technology, USA.

Hilal, M; Maqsood, T and Abdekhodaee, A (2019) A hybrid conceptual model for BIM in FM. Construction Innovation, 19(4), pp. 531-549. ISSN 1471-4175

Hooper, A and Nicol, C (2000) Design practice and volume production in speculative housebuilding. Construction Management and Economics, 18(3), pp. 295-310. ISSN 01446193

Hooper, M (2015) BIM anatomy II: Standardisation needs & support systems. PhD thesis, Lund University, Sweden.

Hoxley, M and Rowsell, R (2006) Using video in the construction technology classroom: Encouraging active learning. Architectural Engineering and Design Management, 2(1-2), pp. 115-122. ISSN 1745-2007

Ioannou, P. G. and Liu, L. Y. (1993) Advanced construction technology system: Acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Ioannou, P G and Liu, L Y (1993) Advanced construction technology system: acts. Journal of Construction Engineering and Management, 119(2), pp. 288-306. ISSN 0733-9364

Ismail, F; Ruikar, K D; Carrillo, P and Anumba, C J (2009) Technology transfer in construction: Learning from the manufacturing industry. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Ismail, F Z; Halog, A and Smith, C (2017) How sustainable is disaster resilience? An overview of sustainable construction approach in post-disaster housing reconstruction. International Journal of Disaster Resilience in the Built Environment, 8(5), pp. 555-572. ISSN 1759-5916

Johnson, K D and Tatum, C B (1993) Technology in marine construction firms. Journal of Construction Engineering and Management, 119(1), pp. 148-162. ISSN 0733-9364

Kakoto, T and Skibniewski, M (1991) Engineering decision support of automated shield tunneling. Journal of Construction Engineering and Management, 117(4), pp. 674-690. ISSN 0733-9364

Kang, L S and Paulson, B C (2000) Information classification for civil engineering projects by uniclass. Journal of Construction Engineering and Management, 126(2), pp. 158-167. ISSN 0733-9364

Kangari, R and Miyatake, Y (1997) Developing and managing innovative construction technologies in Japan. Journal of Construction Engineering and Management, 123(1), pp. 72-84. ISSN 0733-9364

Keskin, B; Salman, B and Ozorhon, B (2021) Airport project delivery within BIM-centric construction technology ecosystems. Engineering, Construction and Architectural Management, 28(2), pp. 530-548. ISSN 0969-9988

Khorrami Shad, H; Tak Wing Yiu, K; Lovreglio, R and Feng, Z (2024) State-of-the-art analysis of the integration of augmented reality with construction technologies to improve construction safety. Smart and Sustainable Built Environment, 13(6), pp. 1434-1449. ISSN 2046-6099

Kim, J and Irizarry, J (2021) Evaluating the use of augmented reality technology to improve construction management student’s spatial skills. International Journal of Construction Education and Research, 17(2), pp. 99-116. ISSN 1557-8771

Kim, K P and Park, K S (2016) Exploratory research on bim integration in housing refurbishment in the UK. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Kineber, A F; Othman, I; Oke, A E; Chileshe, N and Zayed, T (2023) Value management implementation barriers for sustainable building: A bibliometric analysis and partial least square structural equation modeling. Construction Innovation, 23(1), pp. 38-73. ISSN 1471-4175

Kum, Y T; Yap, J B H; Lew, Y L and Lee, W P (2024) Transforming construction health and safety management during COVID-19 pandemic using innovative technologies: PLS-SEM approach. Engineering, Construction and Architectural Management, 31(7), pp. 2770-2808. ISSN 0969-9988

Kumar, V S S (1993) Application of fuzzy set theory in construction management. PhD thesis, Indian Institute of Technology Delhi, India.

Kumaraswamy, M M and Shrestha, G B (2002) Targeting 'technology exchange' for faster organizational and industry development. Building Research & Information, 30(3), pp. 183-195. ISSN 0961-3218

Kwok, T W; Chang, S and Li, H (2025) Understanding client satisfaction of prefabricated curtain wall in Hong Kong using xgboost and Pearson correlation. Engineering, Construction and Architectural Management, 32(2), pp. 1254-1277. ISSN 0969-9988

Leu, S-S (1992) Object-oriented representation model of construction technology information. PhD thesis, University of Michigan, USA.

Li, Y.; Tai, S. and Tai, Z. (2024) Development of ANP-based greenness evaluation model of construction technologies in China. Journal of Engineering, Design and Technology, 24(2), pp. 602-630. ISSN 1726-0531

Li, T; Li, Z and Cai, J (2024) Antecedents and consequence of intra-organizational diffusion of prefabricated construction technology: A contingency theory perspective. Engineering, Construction and Architectural Management, 31(7), pp. 2932-2951. ISSN 0969-9988

Li, T; Li, Z and Dou, Y (2023) Diffusion prediction of prefabricated construction technology under multi-factor coupling. Building Research & Information, 51(3), pp. 333-353. ISSN 0961-3218

Li, Y and Liu, C (2010) Malmquist indices of total factor productivity changes in the Australian construction industry. Construction Management and Economics, 28(9), pp. 933-945. ISSN 1466433X

Li, Y and Liu, C (2011) Construction capital productivity measurement using a data envelopment analysis. International Journal of Construction Management, 11(1), pp. 49-61. ISSN 1562-3599

Li, Y and Liu, C (2019) Applications of multirotor drone technologies in construction management. International Journal of Construction Management, 19(5), pp. 401-412. ISSN 1562-3599

Linner, T; Pan, W; Hu, R; Zhao, C; Iturralde, K; Taghavi, M; Trummer, J; Schlandt, M and Bock, T (2020) A technology management system for the development of single-task construction robots. Construction Innovation, 20(1), pp. 96-111. ISSN 1471-4175

Liu, C; M.E. Sepasgozar, S; Shirowzhan, S and Mohammadi, G (2022) Applications of object detection in modular construction based on a comparative evaluation of deep learning algorithms. Construction Innovation, 22(1), pp. 141-159. ISSN 1471-4175

Liu, L (2009) Risk management during technology transfer: A case study of sanitation project in Shangdong Province, China. PhD thesis, University College London, UK.

Lowe, J (2023) Technical and organisational change in UK construction. Journal of Construction Business and Management, 6(2), pp. 50-61. ISSN 2521-0165

Lu, H; Behbahani, S; Azimi, M; Matthews, J C; Han, S and Iseley, T (2020) Trenchless construction technologies for oil and gas pipelines: State-of-the-art review. Journal of Construction Engineering and Management, 146(6): 03120001, ISSN 0733-9364

Lu, H; Wang, H; Yu, D and Ye, J (2023) Sharp schedule compression in urgent emergency construction projects via activity crashing, substitution and overlapping: A case study of huoshengshan and leishenshan hospital projects in wuhan. Engineering, Construction and Architectural Management, 30(8), pp. 3696-3712. ISSN 0969-9988

Luo, S; Liu, Z; Yang, X; Lu, Q and Yin, J (2019) Construction technology of warm and hot mix epoxy asphalt paving for long-span steel bridge. Journal of Construction Engineering and Management, 145(12): 04019074, ISSN 0733-9364

M.E. Sepasgozar, S (2020) Digital technology utilisation decisions for facilitating the implementation of industry 4.0 technologies. Construction Innovation, 21(3), pp. 476-489. ISSN 1471-4175

Ma, B; Cai, Y; Zhang, H; Fan, Y; Wang, F; Wang, P; Lyu, Z and Zhao, Z (2025) Evaluating construction risks of ultralarge diameter bored pile in deep water using combination weighting with two-dimensional cloud optimization. Journal of Construction Engineering and Management, 151(8): 05025007, ISSN 0733-9364

Madanayake, U H and Egbu, C (2019) Critical analysis for big data studies in construction: Significant gaps in knowledge. Built Environment Project and Asset Management, 9(4), pp. 530-547. ISSN 2044-124X

Marcos, Micheline Helen Cot (2015) Method of obtaining environmental impact data, during the design development process through use of BIM tool. PhD thesis, Universidade de São Paulo, Brazil.

McCutcheon, R (1979) Modern construction technology in low-income housing policy: The case of industrialised building. PhD thesis, University of Sussex, UK.

McLean, W (2018) Technological innovation in architecture: the role of the aberrant practitioner. PhD thesis, University of Westminster, UK.

Miles, D W J (1997) The development of intermediate construction enterprises. PhD thesis, Loughborough University, UK.

Miller, M L and Bernold, L E (1991) Sensor-integrated nailing for building construction. Journal of Construction Engineering and Management, 117(2), pp. 213-225. ISSN 0733-9364

Modak, J P; Sohoni, V V and Aware, H V (1997) Manually powered manufacture of keyed bricks. Building Research & Information, 25(6), pp. 354-364. ISSN 0961-3218

Momade, M H; Durdyev, S; Van Tam, N; Shahid, S; Mbachu, J and Momade, Y (2024) Factors influencing adoption of construction technologies in Vietnam's residential construction projects. International Journal of Building Pathology and Adaptation, 42(5), pp. 1002-1018. ISSN 2398-4708

Mostafa, S; Kim, K P; Tam, V W Y and Rahnamayiezekavat, P (2020) Exploring the status, benefits, barriers and opportunities of using BIM for advancing prefabrication practice. International Journal of Construction Management, 20(2), pp. 146-156. ISSN 1562-3599

Motawa, I A; Price, A D F and Sher, W (1998) The introduction and management of innovative construction processes and products. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Mudiyanselage, A C E E; Shen, G Q P and Kumaraswamy, M M (2019) Managing vulnerabilities and capabilities for supply chain resilience in industrialised construction. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Mullens, M A and Arif, M (2006) Structural insulated panels: Impact on the residential construction process. Journal of Construction Engineering and Management, 132(7), pp. 786-794. ISSN 0733-9364

Nahmens, I and Reichel, C (2013) Adoption of high performance building systems in hot-humid climates: lessons learned. Construction Innovation, 13(2), pp. 186-201. ISSN 1471-4175

Nam, C H and Tatum, C B (1988) Major characteristics of constructed products and resulting limitations of construction technology. Construction Management and Economics, 6(2), pp. 133-147. ISSN 01446193

Nasri, E; Pegels, G; Mostofinejad, D and Chini, A (2010) International transfer of CAD/CAM construction technologies: Case study of a German-Iranian partnership. International Journal of Construction Management, 10(2), pp. 71-92. ISSN 1562-3599

Nguyen, T T T (2010) EDDE: A framework to explore, design, develop and evaluate technology-enhanced instruction for construction. PhD thesis, University of Texas at Austin, USA.

Nguyen Ngoc, H; Mohammed Abdelkader, E; Al-Sakkaf, A; Alfalah, G and Zayed, T (2024) A hybrid AHP-MAUT model for assessing competitiveness of construction companies: A case study of construction companies in Vietnam and Canada. Construction Innovation, 24(5), pp. 1320-1353. ISSN 1471-4175

Nie, P; Dahanayake, K C and Sumanarathna, N (2024) Exploring uae's transition towards circular economy through construction and demolition waste management in the pre-construction stage–a case study approach. Smart and Sustainable Built Environment, 13(2), pp. 246-266. ISSN 2046-6099

Nielsen, Y; Kumas, N and Ciftci, C (2006) ICT use in Turkish construction sector: Existing laws and regulations. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Nuntasunti, S and Bernold, L E (2006) Experimental assessment of wireless construction technologies. Journal of Construction Engineering and Management, 132(9), pp. 1009-1018. ISSN 0733-9364

Nyqvist, R; Peltokorpi, A; Lavikka, R and Ainamo, A (2025) Artificial intelligence driven platforms in the construction industry: Implications for companies' business models. Construction Innovation, 25(7), pp. 409-443. ISSN 1471-4175

Ofori, G (1994) Construction industry development: Role of technology transfer. Construction Management and Economics, 12(5), pp. 379-392. ISSN 01446193

Oke, A. E.; Adekunye, O. J.; Adeosun, F. E.; Aliu, J.; Akanni, P. O.; Aghimien, D. and Aigbavboa, C. O. (2026) Assessment of the challenges of integrating cyber-physical systems in Nigerian construction. Engineering, Construction and Architectural Management, 33(4), pp. 3146-3163. ISSN 0969-9988

Oke, A E; Aliu, J O; Tamunosa Ojurongbe, E; Aigbavboa, C O; Aghimien, D O and Ebekozien, A (2026) Investigation of core and future competencies needed for quantity surveyors in Nigeria. International Journal of Construction Education and Research, 22(1), pp. 119-137. ISSN 1557-8771

Okpala, I; Nnaji, C and Awolusi, I (2022) Wearable sensing devices acceptance behavior in construction safety and health: Assessing existing models and developing a hybrid conceptual model. Construction Innovation, 22(1), pp. 57-75. ISSN 1471-4175

Okpala, I; Nnaji, C; Awolusi, I and Akanmu, A (2021) Developing a success model for assessing the impact of wearable sensing devices in the construction industry. Journal of Construction Engineering and Management, 147(7): 04021060, ISSN 0733-9364

Olayiwola, J; Yusuf, A O; Akanmu, A A; Murzi, H; Gao, X and Afsari, K (2025) Construction practice knowledge for complementing classroom teaching during site visits. Smart and Sustainable Built Environment, 14(1), pp. 119-139. ISSN 2046-6099

Orth, D L (2003) Predicting student success in a building construction management program. PhD thesis, Purdue University, USA.

Oti-Sarpong, K and Leiringer, R (2016) The role of learning in construction technology transfer: A 'SCOT' perspective. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Oti-Sarpong, K; Pärn, E A; Burgess, G and Zaki, M (2022) Transforming the construction sector: An institutional complexity perspective. Construction Innovation, 22(2), pp. 361-387. ISSN 1471-4175

O’Connor, J T and Davis, V S (1988) Constructability improvement during field operations. Journal of Construction Engineering and Management, 114(4), pp. 548-564. ISSN 0733-9364

Patil, K; Ayer, S K; Bhandari, S; Hallowell, M R and Perry, L A (2025) Bringing reality to virtual reality: The role of environmental richness in improving construction practitioners' VR experience. Construction Innovation, 25(7), pp. 358-383. ISSN 1471-4175

Pesce, C (2022) Tailoring lime properties to the modern construction industry. The effects of organic additives and alternative slaking methods on portlandite mineralogy. PhD thesis, University of Northumbria at Newcastle, UK.

Pietroforte, R and Bon, R (1995) An input-output analysis of the Italian construction sector, 1959-1988. Construction Management and Economics, 13(3), pp. 253-262. ISSN 01446193

Pietroforte, R and Bon, R (1999) The Italian residential construction sector: An input-output historical analysis. Construction Management and Economics, 17(3), pp. 297-303. ISSN 01446193

Pietroforte, R; Bon, R and Gregori, T (2000) Regional development and construction in Italy: An input-output analysis, 1959-1992. Construction Management and Economics, 18(2), pp. 151-159. ISSN 01446193

Pietroforte, R and Gregori, T (2003) An input-output analysis of the construction sector in highly developed economies. Construction Management and Economics, 21(3), pp. 319-327. ISSN 01446193

Putri, A T; Chan, T K; Soemardi, B and Abduh, M (2026) Evaluating the quality of publicly available construction technology data in Indonesia. Construction Economics and Building, 26(1), ISSN 2204-9029

Rana, V.; Singh, V.; Singh, A. R.; Rao, M. S. and Kashyap, K. (2026) Promoting real estate sensitivity among AEC students: A board game-based approach to applied learning. Architectural Engineering and Design Management, 22(1), pp. 149-167. ISSN 1745-2007

Rashid, R A (1998) A model for an effective implementation of the government technology transfer policy in the Malaysian construction industry. PhD thesis, University of Reading, UK.

Reyna, S M; Vanegas, J A and Khan, A H (1994) Construction technologies for sewer rehabilitation. Journal of Construction Engineering and Management, 120(3), pp. 467-487. ISSN 0733-9364

Rizzi, Dario (2025) Tools for sustainable design strategies: Optimization of integrated BIM-blockchain technologies and protocols for the application of minimum environmental criteria. PhD thesis, Università degli Studi di Ferrara, Italy.

Rodrigues, F; Antunes, F and Matos, R (2021) Safety plugins for risks prevention through design resourcing BIM. Construction Innovation, 21(2), pp. 244-258. ISSN 1471-4175

Rogge, D F and Tucker, R L (1987) Research needs in steel and concrete construction. Journal of Construction Engineering and Management, 113(3), pp. 440-446. ISSN 0733-9364

Rosenfeld, Y; Navon, R and Cohen, L (1998) Methodology for prioritizing cost-effective construction technologies. Journal of Construction Engineering and Management, 124(3), pp. 176-184. ISSN 0733-9364

Saad, S; Alaloul, W S; Ammad, S and Qureshi, A H (2022) A qualitative conceptual framework to tackle skill shortages in offsite construction industry: A scientometric approach. Engineering, Construction and Architectural Management, 29(10), pp. 3917-3947. ISSN 0969-9988

Sackey, E and Akotia, J (2017) Spanning the multilevel boundaries of construction organisations: Towards the delivery of BIM-compliant projects. Construction Innovation, 17(3), pp. 273-293. ISSN 1471-4175

Sackey, E; Tuuli, M and Dainty, A (2019) Expansive learning in contemporary construction organisations: An exemplar in BIM-mediated projects. Built Environment Project and Asset Management, 9(3), pp. 383-398. ISSN 2044-124X

Sadeghi, B (2024) Selecting Industry 4.0 technologies for construction activities using clustering analysis and text mining. PhD thesis, University of Wisconsin - Milwaukee, USA.

Said, H; Rajagopalan, A and Hall, D M (2025) Longitudinal analysis of interorganizational collaborative networks of cross-laminated timber (CLT) construction. Construction Innovation, 25(6), pp. 1840-1864. ISSN 1471-4175

Saidi, K (2002) Possible applications of handheld computers to quantity surveying. PhD thesis, University of Texas at Austin, USA.

Saka, A B and Chan, D W M (2020) Profound barriers to building information modelling (BIM) adoption in construction small and medium-sized enterprises (SMEs): An interpretive structural modelling approach. Construction Innovation, 20(2), pp. 261-284. ISSN 1471-4175

Salat, S (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information, 37(5-6), pp. 598-609. ISSN 0961-3218

Salih, F and El-Adaway, I H (2024) Quantifying the impact of technology utilization on schedule and cost performance in construction projects. Journal of Construction Engineering and Management, 150(8): 04024078, ISSN 0733-9364

Sarisley, E F (1990) Construction methods and costs of stress-laminated timber bridges. Journal of Construction Engineering and Management, 116(3), pp. 432-447. ISSN 0733-9364

Schroeder, H P (1991) Dycam 1.0: Dynamic construction activity model, a decision support tool for construction planning. PhD thesis, University of Colorado at Boulder, USA.

Scott, L and Shaurette, M (2012) Developing an understanding of research principles to support post-graduate education in the built environment. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Seaden, G; Guolla, M; Doutriaux, J and Nash, J (2003) Strategic decisions and innovation in construction firms. Construction Management and Economics, 21(6), pp. 603-612. ISSN 01446193

Sepasgozar, S M E and Loosemore, M (2017) The role of customers and vendors in modern construction equipment technology diffusion. Engineering, Construction and Architectural Management, 24(6), pp. 1203-1221. ISSN 0969-9988

Sepasgozar, S M E; Loosemore, M and Davis, S R (2016) Conceptualising information and equipment technology adoption in construction: A critical review of existing research. Engineering, Construction and Architectural Management, 23(2), pp. 158-176. ISSN 0969-9988

Sepasgozar, Samad (2015) Technology adoption in construction. PhD thesis, University of New South Wales, Australia.

Shafei, H; Rahman, R A and Lee, Y S (2024) Effectiveness evaluation of Construction 4.0 technologies in improving built environment resilience. International Journal of Disaster Resilience in the Built Environment, 15(4), pp. 530-550. ISSN 1759-5916

Shang, G; Pheng, L S and Gina, O L T (2021) Understanding the low adoption of prefabrication prefinished volumetric construction (ppvc) among SMEs in Singapore: From a change management perspective. International Journal of Building Pathology and Adaptation, 39(5), pp. 685-701. ISSN 23984708

Shang, G; Pheng, L S and Zhong Xia, R L (2024) Adoption of smart contracts in the construction industry: An institutional analysis of drivers and barriers. Construction Innovation, 24(5), pp. 1401-1421. ISSN 1471-4175

Shaofeng, L; Jincai, F; Pinghua, Z and Xiang, L (2018) Stability analysis of two parallel closely spaced tunnels based on convergence-confinement principle. Journal of Construction Engineering and Management, 144(6): 04018041, ISSN 0733-9364

Shapiro Comte, B (1999) The architect's working drawings in context: Paris, 1791-1875. PhD thesis, Harvard University, USA.

Shelton, J; Martek, I and Chen, C (2016) Implementation of innovative technologies in small-scale construction firms: Five Australian case studies. Engineering, Construction and Architectural Management, 23(2), pp. 177-191. ISSN 0969-9988

Sherif, A H (1988) The choice of construction technology in developing countries: A socially conscious economic assessment approach. DArch thesis, University of Michigan, USA.

Sherman, P J (1988) Japanese construction R&D: Entrèe into U.S. Market. Journal of Construction Engineering and Management, 114(1), pp. 133-143. ISSN 0733-9364

Simkoko, E E (1989) Analysis of factors impacting technology transfer in construction projects: Case studies from developing countries. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Skibniewski, M J (1991) Information management system for new construction technologies. Construction Management and Economics, 9(1), pp. 39-49. ISSN 01446193

Stewart, R A and Waroonkun, T (2007) Benchmarking construction technology transfer in Thailand. Construction Innovation, 7(3), pp. 218-239. ISSN 1471-4175

Suprun, Emiliya (2018) An integrated systems model of construction innovation in the Russian federation. PhD thesis, Griffith University, Russia.

Tamtana, J S (2001) How technology strategy affects technology transfer and competitive performance in the Indonesian construction industry. PhD thesis, Nova Southeastern University, USA.

Tan, W and Elias, Y (2000) Learning-by-doing in Singapore construction. Journal of Construction Research, 1(2), pp. 151-158. ISSN 1609-9451

Tariq, S; Hussein, M; Wang, R D and Zayed, T (2022) Trends and developments of on-site crane layout planning 1983–2020: Bibliometric, scientometric and qualitative analyses. Construction Innovation, 22(4), pp. 1011-1035. ISSN 1471-4175

Tarpio, J and Lehtovuori, P (2026) Horizontal building extensions: Potential in Finnish blocks of flats. Buildings & Cities, 7(1), pp. 445-466. ISSN 2632-6655

Tasselli, Nicola (2023) BIM digital integration for existing buildings: Processes and tools to foster technological innovation of added-value building systems applied to the 20th century built asset in emilia-romagna. PhD thesis, Università degli Studi di Ferrara, Italy.

Tatum, C B (1987) Process or innovation in construction firm. Journal of Construction Engineering and Management, 113(4), pp. 648-663. ISSN 0733-9364

Tatum, C B (1988) Classification system for construction technology. Journal of Construction Engineering and Management, 114(3), pp. 344-363. ISSN 0733-9364

Tatum, C B (2018) Construction engineering research: Integration and innovation. Journal of Construction Engineering and Management, 144(3): 04018005, ISSN 0733-9364

Teicholz, P and Fischer, M (1994) Strategy for computer integrated construction technology. Journal of Construction Engineering and Management, 120(1), pp. 117-131. ISSN 0733-9364

Tennakoon, T M M P; Chileshe, N; Rameezdeen, R; Ochoa, J J and Samaraweera, A (2026) Mixed methods framework for implementation research in the architecture, engineering, construction and operations industry. International Journal of Construction Management, 26(2), pp. 204-218. ISSN 1562-3599

Trinh, T T P and Sharif, N (1996) Assessing construction technology by integrating constructed product and construction process complexities: A case study of embankment dams in Thailand. Construction Management and Economics, 14(6), pp. 467-484. ISSN 01446193

Vaughan, J L; Leming, M L; Liu, M and Jaselskis, E (2013) Cost-benefit analysis of construction information management system implementation: Case study. Journal of Construction Engineering and Management, 139(4), pp. 445-455. ISSN 0733-9364

Vyčítal, M (2019) On BIM based automatized nD modelling for construction management. PhD thesis, Czech Technical University, Czech Republic.

Walzer, A N; Tan, T; Graser, K and Hall, D M (2025) Bug or feature? Institutional misalignments between construction technology and venture capital. Construction Management and Economics, 43(2), pp. 130-152. ISSN 0144-6193

Wang, L.; Yuan, J.; Chen, Y.; Wan, X. and Huang, G. (2026) Intelligent construction benefits the public: Evidence from the opinion analysis on social media. Engineering, Construction and Architectural Management, 33(3), pp. 2176-2199. ISSN 0969-9988

Wang, C; Xie, X; Shuai, C; Ma, X; Wang, Z; Chen, Y; Chen, X and Strezov, V (2025) Influencing factors of green building practitioners' competition perceptions: evidence from China. International Journal of Construction Management, 25(4), pp. 385-397. ISSN 1562-3599

Wang, H; Yi, W; Zhen, L and Chan, A P C (2024) Cost-optimized transport planning for prefabricated modules with the implementation of the just-in-time strategy. Journal of Construction Engineering and Management, 150(8): 04024093, ISSN 0733-9364

Wang, J; Han, J; Chen, J; Ding, G; Feng, G; Liu, T and Guo, B (2022) Experimental and numerical study on the dynamic response of a superthick backfill subgrade under high-speed railway loading: A case study of qianjiang-zhangjiajie-changde railway. Journal of Construction Engineering and Management, 148(12): 05022014, ISSN 0733-9364

Windapo, A and Moghayedi, A (2018) Building material price differentiation across geographic locations in South Africa. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 170(6), pp. 243-254. ISSN 17514304

Wood H L, P P F E R P (2013) Understanding complexity in the AEC industry. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Wu, J and Liu, A M M (2006) A study on the relationship between organizational commitment and task performance in Chinese construction firms. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Xie, W; Zhao, T; Tang, J and Zhang, Y (2017) Arch first and beam later: Arch-rib integral installation construction technology for large-span tied-arch bridge. Journal of Construction Engineering and Management, 143(8): 04017059, ISSN 0733-9364

Xue, H; Zhang, S; Wu, Z and Zhang, L (2025) How to improve the smart construction technology usage behavior of construction enterprise employees? TOE framework based on configuration study. Engineering, Construction and Architectural Management, 32(2), pp. 785-804. ISSN 0969-9988

Yi, W; Wang, H; Zhen, L and Liu, Y (2023) Automated generation of horizontal precast slab stacking plans. Journal of Construction Engineering and Management, 149(12): 04023121, ISSN 0733-9364

You, H (2000) Organizational strategies for construction technology transfer to China. PhD thesis, University of Hong Kong, Hong Kong.

Yu, J.; Ma, J.; Wang, B. and Wang, J. (2026) Public opinions on intelligent construction programs in China: Evidence from social media. Journal of Engineering, Design and Technology, pp. 1-23. ISSN 1726-0531

Yu, W-d (1996) A neuro-fuzzy knowledge-based multi-criterion decision model for constructability analysis and improvement of construction technologies. PhD thesis, Purdue University, USA.

Yuan, M; Li, Z; Li, X; Luo, X; Yin, X and Cai, J (2023) Proposing a multifaceted model for adopting prefabricated construction technology in the construction industry. Engineering, Construction and Architectural Management, 30(2), pp. 755-786. ISSN 0969-9988

Yucel, B and Azhar, S (2024) Investigating critical success factors and risks of construction technology startups: A systematic literature review. International Journal of Construction Management, 24(15), pp. 1655-1667. ISSN 1562-3599

Yücel, B and Çomu, S (2025) Evaluating factors affecting construction technology start-up investments and investor behavior. Journal of Construction Engineering and Management, 151(11): 04025177, ISSN 0733-9364

Zami, M S (2010) Understanding the factors that influence the adoption of stabilised earth by construction professionals to address the Zimbabwe urban low cost housing crisis. PhD thesis, University of Salford, UK.

Zhang, L; Hu, H; Fang, Y; Qiang, Z and Cai, Y (2023) Preliminary CSI specification localization methodology matrix in China. International Journal of Construction Management, 23(6), pp. 935-944. ISSN 1562-3599

Zhang, X; Zhang, Z; Sun, W; Hu, J; Zhang, L and Zhu, W (2025) The mechanical deformation characteristics of the internal structure of large diameter shield tunnel in different construction stages. Engineering, Construction and Architectural Management, 32(4), pp. 2190-2209. ISSN 0969-9988

van Egmond-deWilde de Ligny, E and Erkelens, P (2008) Construction technology diffusion in developing countries: Limitations of prevailing innovation systems. Journal of Construction in Developing Countries, 13(2), pp. 43-63. ISSN 1823-6499