Items with Index Term: construction material

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO2 emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abdelgader, S H; Kurpinska, M; Abdelgader, H S; Omidi Moaf, F and Amran, M (2025) Study the impact of design method preference on the usefulness of concrete and on CO₂ emissions. International Journal of Building Pathology and Adaptation, 43(4), pp. 804-825. ISSN 2398-4708

Abedmousa, M (2023) Reframing construction labour productivity in a colonisation context: the West Bank as an example. PhD thesis, University of Westminster, UK.

Abkar, M M A; Yunus, R; Harouache, A; Gamil, Y and Al-Shameri, A S A S (2025) The adoption of automation technology for the mitigation of material waste on construction sites in the Malaysian construction industry. International Journal of Construction Management, 25(5), pp. 530-541. ISSN 1562-3599

Abuhussain, M (2020) An assessment of the Saudi Residential Buildings Envelope Code under the current and future climate change scenarios: the case for Jeddah in the hot and humid climate region. PhD thesis, University of Liverpool, UK.

Adefila, A; Abuzeinab, A; Whitehead, T and Oyinlola, M (2020) Bottle house: Utilising appreciative inquiry to develop a user acceptance model. Built Environment Project and Asset Management, 10(4), pp. 567-583. ISSN 2044-124X

Aftab, U; Hassan, M U; Ullah, F; Nasir, A R and Thaheem, M J (2026) BIM-based search and selection of construction material suppliers: A dedicated framework and prototype. Construction Innovation, 26(3), pp. 892-915. ISSN 1471-4175

Ahmadian, F F A; Akbarnezhad, A; Rashidi, T H and Waller, S T (2016) Accounting for transport times in planning off-site shipment of construction materials. Journal of Construction Engineering and Management, 142(1): 04015050, ISSN 0733-9364

Ahmed, S; Islam, H; Hoque, I and Hossain, M (2020) Reality check against skilled worker parameters and parameters failure effect on the construction industry for Bangladesh. International Journal of Construction Management, 20(5), pp. 480-489. ISSN 1562-3599

Akrawi, S G (1998) Sensing and real-time expert system for a masonry building robot. PhD thesis, City, University of London, UK.

Aktas, E (2001) Structural design code calibration using reliability-based cost optimization. PhD thesis, University of Pittsburgh, USA.

Al Sanad, S A (2014) The promotion of sustainable construction practices in Kuwait. PhD thesis, University of Manchester, UK.

Al-Derham, H R (1999) The establishment of performance criteria for the evaluation of procurement of senior staff and private housing projects in the State of Qatar. PhD thesis, University of Glamorgan, UK.

Al-Otaibi, N T N H (1995) A knowledge-based systems approach to materials management for large construction projects. PhD thesis, University of Toronto, Canada.

Al-Sudairi, A A (2007) Evaluating the effect of construction process characteristics to the applicability of lean principles. Construction Innovation, 7(1), pp. 99-121. ISSN 1471-4175

Alhabashi, M H (1991) Material management in the United States construction industry. DSc thesis, George Washington University, USA.

Aligamhe, V I; Mustapa, M; Ogbu, C P and Misnan, M S (2024) Modelling cost-risk impact on Nigerian highway projects using multiple linear regression and artificial neural networks. Journal of Construction in Developing Countries, 29(2), pp. 107-128. ISSN 1823-6499

Aljammaz, K M A (2006) An approach for the assessment of sustainability of construction materials. PhD thesis, University of Newcastle upon Tyne, UK.

Alkaabi, J A (1994) Improved materials management using automatic identification techniques. PhD thesis, Loughborough University, UK.

Almazkoor, F B (2014) Two-stage methodology for managing and controlling material flow between multiple construction projects. PhD thesis, Clemson University, USA.

Alumbugu, P O (2019) Construction material logistics management: the case of north-central Nigeria. PhD thesis, Nelson Mandela University, South Africa.

Alvanchi, A; Bajalan, Z and Iravani, P (2021) Emission assessment of alternative dam structure types, a novel approach to consider in new dam projects. Construction Innovation, 21(2), pp. 203-217. ISSN 1471-4175

Alzohbi, M G M (2015) A framework for evaluating material management performance in Jordanian concrete building projects. PhD thesis, Sheffield Hallam University, UK.

Alzoubi, Y; Locatelli, G and Sainati, T (2024) Turning a blind eye: Ignoring modern slavery in the race to construction project completion. Journal of Construction Engineering and Management, 150(10): 04024136, ISSN 0733-9364

Anderson, J and Moncaster, A (2020) Embodied carbon of concrete in buildings, Part 1: Analysis of published EPD. Buildings & Cities, 1(1), pp. 198-217. ISSN 2632-6655

Andersson, R and Buser, M (2020) On the road to nowhere? The challenges of aligning construction and demolition waste practices with circular economy. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Anh Tuan, B L; Tesfamariam, M G; Chen, Y Y; Hwang, C L; Lin, K L and Young, M P (2014) Production of lightweight aggregate from sewage sludge and reservoir sediment for high-flowing concrete. Journal of Construction Engineering and Management, 140(5): 04014005, ISSN 0733-9364

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Anjaneyappa, V; Amarnath, M S and Srinivasamurthy, B R (2014) Compacting characteristics of light compacting equipment. Journal of Construction Engineering and Management, 140(5): 04014003, ISSN 0733-9364

Anwar, Waqas (2019) Development of multiple linear regression model and rule based decision support system to improve supply chain management of road construction projects in disaster regions. PhD thesis, University of Bradford, UK.

Arambula, E and Gharaibeh, N (2014) Methods for accumulating construction and material quality test results and their effect on acceptance decisions. Journal of Construction Engineering and Management, 140(8): 06014006, ISSN 0733-9364

Arpaci, E Y G; Akbulut, D E and Yildiz, O (2024) Enhancing water resistance of earthen buildings by using admixture materials. Architectural Engineering and Design Management, 20(2), pp. 320-336. ISSN 1745-2007

Arroyo, P; Tommelein, I D and Ballard, G (2016) Selecting globally sustainable materials: A case study using choosing by advantages. Journal of Construction Engineering and Management, 142(2): 05015015, ISSN 0733-9364

Arshad, H; Qasim, M; Thaheem, M J and Gabriel, H F (2017) Quantification of material wastage in construction industry of Pakistan: An analytical relationship between building types and waste generation. Journal of Construction in Developing Countries, 22(2), pp. 19-34. ISSN 1823-6499

Azadeh, A; Kalantari, M; Ahmadi, G and Eslami, H (2019) A flexible genetic algorithm-fuzzy regression approach for forecasting: The case of bitumen consumption. Construction Innovation, 19(1), pp. 71-88. ISSN 1471-4175

Babahaji Meibodi, A (2015) On-site concrete waste minimisation in Iran. PhD thesis, Kingston University, UK.

Bajere, P A (1996) Maintenance conditions and occupant behavior in government-provided housing in Lagos, Nigeria. DIT thesis, University of Northern Iowa, USA.

Bakhtiyari, S; Taghi Akbari, L and Jamali Ashtiani, M (2017) An investigation on fire hazard and smoke toxicity of epoxy FRP composites. International Journal of Disaster Resilience in the Built Environment, 8(3), pp. 230-237. ISSN 1759-5916

Barbachyn, S M; Devine, R D; Thrall, A P and Kurama, Y C (2017) Economic evaluation of high-strength materials in stocky reinforced concrete shear walls. Journal of Construction Engineering and Management, 143(10): 04017074, ISSN 0733-9364

Barber Jr., H M (2013) Economic assessment of the construction industry: A construction-economics nexus. PhD thesis, Mississippi State University, USA.

Basheer, M; Elnour, Z; Siddig, K and Grethe, H (2025) Economic impacts of large dams on downstream brickmaking in developing countries. Construction Management and Economics, 43(3), pp. 213-225. ISSN 0144-6193

Bassioni, H; Emasry, M I; Ragheb, A M and Youssef, A A (2012) Time series analysis for the prediction of RC material components prices in Egypt. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Bastos, J; Batterman, S A and Freire, F (2016) Significance of mobility in the life-cycle assessment of buildings. Building Research & Information, 44(4), pp. 376-393. ISSN 0961-3218

Becerra, J; Ortiz, P; Zaderenko, A P and Karapanagiotis, I (2020) Assessment of nanoparticles/nanocomposites to inhibit micro-algal fouling on limestone façades. Building Research & Information, 48(2), pp. 180-190. ISSN 0961-3218

Bekele, A A; Mahesh, G and Ingle, P V (2025) Enhancing SMCs' competitiveness through improving material supply chain management practice. International Journal of Construction Management, 25(1), pp. 77-88. ISSN 1562-3599

Bell, L C and Stukhart, G (1986) Attributes of materials management systems. Journal of Construction Engineering and Management, 112(1), pp. 14-21. ISSN 0733-9364

Benjaoran, V; Sooksil, N and Metham, M (2019) Effect of demand variations on steel bars cutting loss. International Journal of Construction Management, 19(2), pp. 137-148. ISSN 1562-3599

Bernold, L E and Salim, M (1993) Placement-oriented design and delivery of concrete reinforcement. Journal of Construction Engineering and Management, 119(2), pp. 323-335. ISSN 0733-9364

Bernold, L E and Treseler, J F (1991) Vendor analysis for best buy in construction. Journal of Construction Engineering and Management, 117(4), pp. 645-658. ISSN 0733-9364

Berrill, P and Hertwich, E G (2021) Material flows and GHG emissions from housing stock evolution in US counties, 2020–60. Buildings & Cities, 2(1), pp. 599-617. ISSN 2632-6655

Best, Eric A (2008) The development and testing of a purchasing power parity method for comparing construction costs internationally. PhD thesis, University of Technology Sydney, Australia.

Best, R (2010) Using purchasing power parity to assess construction productivity. Construction Economics and Building, 10(4), pp. 1-10. ISSN 2204-9029

Bijleveld, F R; Miller, S R and Dorée, A G (2015) Making operational strategies of asphalt teams explicit to reduce process variability. Journal of Construction Engineering and Management, 141(5): 04015002, ISSN 0733-9364

Bildsten, L; Rehme, J and Brege, S (2010) Applying the Kraljic model to the construction sector: The case of a prefab housing factory. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Blay, K; Agyekum, K and Opoku, A (2019) Actions, attitudes and beliefs of occupants in managing dampness in buildings. International Journal of Building Pathology and Adaptation, 37(1), pp. 42-53. ISSN 23984708

Bolchover, J and Mundle, K (2026) Post-disaster reconstruction: Infill housing prototypes for kathmandu. Buildings & Cities, 7(1), pp. 273-292. ISSN 2632-6655

Booth, Peter Charles (2023) Digitally integrated material practice: Computational methods of engaging non-standardised plantation hardwood in architecture. PhD thesis, University of Technology Sydney, Australia.

Bossink, B A G and Brouwers, H J H (1996) Construction waste: Quantification and source evaluation. Journal of Construction Engineering and Management, 122(1), pp. 55-60. ISSN 0733-9364

Boyd, D (2011) An evaluation of a system change in the purchasing of construction materials by local authorities. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Brockmann, C; Brezinski, H and Erbe, A (2016) Innovation in construction megaprojects. Journal of Construction Engineering and Management, 142(11): 04016059, ISSN 0733-9364

Cai, H; Kuczek, T; Dunston, P S and Li, S (2017) Correlating intelligent compaction data to in situ soil compaction quality measurements. Journal of Construction Engineering and Management, 143(8): 04017038, ISSN 0733-9364

Caldas, C H; Torrent, D G and Haas, C T (2006) Using global positioning system to improve materials-locating processes on industrial projects. Journal of Construction Engineering and Management, 132(7), pp. 741-749. ISSN 0733-9364

Carvalho, P F M (2023) Tectonics and material transformations: Exploring concrete in architecture through digital fabrication processes. PhD thesis, Universidade do Porto, Portugal.

Castro-Lacouture, D; Süer, G A; Gonzalez-Joaqui, J and Yates, J K (2009) Construction project scheduling with time, cost, and material restrictions using fuzzy mathematical models and critical path method. Journal of Construction Engineering and Management, 135(10), pp. 1096-1104. ISSN 0733-9364

Cevallos, O A; Jaramillo, D; Ávila, C and Aldaz, X (2017) Production and quality levels of construction materials in Andean regions: A case study of Chimborazo, Ecuador. Journal of Construction in Developing Countries, 22(1), pp. 115-136. ISSN 1823-6499

Chai, C; De Brito, J; Gaspar, P L and Silva, A (2014) Predicting the service life of exterior wall painting: Techno-economic analysis of alternative maintenance strategies. Journal of Construction Engineering and Management, 140(3): 4013057, ISSN 0733-9364

Chang, Y; Wilkinson, S; Seville, E and Potangaroa, R (2012) Changes in resource need for post-disaster reconstruction: A longitudinal study in China. Building Research & Information, 40(3), pp. 327-336. ISSN 0961-3218

Chau, K W; Anson, M and Zhang, J P (2004) Four-dimensional visualization of construction scheduling and site utilization. Journal of Construction Engineering and Management, 130(4), pp. 598-606. ISSN 0733-9364

Chen, Jamie (2025) Improving construction supply chain material management resilience through mathematical optimisation. PhD thesis, University of New South Wales, Australia.

Chen, Q; Adey, B T; Haas, C and Hall, D M (2020) Using look-ahead plans to improve material flow processes on construction projects when using BIM and RFID technologies. Construction Innovation, 20(3), pp. 471-508. ISSN 1471-4175

Chen, Q; Garcia de Soto, B and Adey, B (2022) Transshipment approach to coordinate materials for a contractor's project portfolio. International Journal of Construction Management, 22(16), pp. 3065-3076. ISSN 1562-3599

Cheng, E W L; li, H; Fang, D P and Xie, F (2004) Construction safety management: An exploratory study from China. Construction Innovation, 4(4), pp. 229-241. ISSN 1471-4175

Cheng, M Y and Yang, S C (2001) GIS-based cost estimates integrating with material layout planning. Journal of Construction Engineering and Management, 127(4), pp. 291-299. ISSN 0733-9364

Cherneff, J M (1990) Knowledge-based interpretation of architectural drawings. PhD thesis, Massachusetts Institute of Technology, USA.

Chiang, Y H; Li, V J; Zhou, L; Wong, F and Lam, P (2016) Evaluating sustainable building-maintenance projects: Balancing economic, social, and environmental impacts in the case of Hong Kong. Journal of Construction Engineering and Management, 142(2): 06015003, ISSN 0733-9364

Cho, C-S; Mazze, C E; Dika, S L and Gehrig, G B (2015) Enhancing construction education: Implementing habitat for humanity projects as service-learning for construction materials. International Journal of Construction Education and Research, 11(1), pp. 4-20. ISSN 1557-8771

Cho, Sung Eun (2025) Machine learning approaches for improving construction materials and pavement systems. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Choi, Y S; Lim, I; Kim, T; Cho, H and Kang, K I (2016) Case study of the core structure succeeding method for tall building construction. Journal of Construction Engineering and Management, 142(12): 05016017, ISSN 0733-9364

Chong, D; Wang, Y; Chen, L and Yu, B (2016) Modeling and validation of energy consumption in asphalt mixture production. Journal of Construction Engineering and Management, 142(12): 04016069, ISSN 0733-9364

Chong, D; Wang, Y; Guo, H and Lu, Y (2014) Volatile organic compounds generated in asphalt pavement construction and their health effects on workers. Journal of Construction Engineering and Management, 140(2): 04013051, ISSN 0733-9364

Chong, D; Wang, Y; Zhao, K; Wang, D and Oeser, M (2018) Asphalt fume exposures by pavement construction workers: Current status and project cases. Journal of Construction Engineering and Management, 144(4): 05018002, ISSN 0733-9364

Choudhari, S and Tindwani, A (2017) Logistics optimisation in road construction project. Construction Innovation, 17(2), pp. 158-179. ISSN 1471-4175

Choudhary, K; Sangwa, N R and Sangwan, K S (2025) Comparative life cycle assessment of flooring options for sustainable buildings. Construction Innovation, 25(4), pp. 1108-1126. ISSN 1471-4175

Choudhury, I (2009) The effect of political unrest on construction time for food grain warehouses in Bangladesh. Construction Management and Economics, 27(7), pp. 619-624. ISSN 1466433X

Cochran, K M (2006) Construction and demolition debris recycling: Methods, markets, and policy. PhD thesis, University of Florida, USA.

Collins, F (2013) 2nd generation concrete construction: Carbon footprint accounting. Engineering, Construction and Architectural Management, 20(4), pp. 330-344. ISSN 0969-9988

Congress, S S C (2018) Novel infrastructure monitoring using multifaceted unmanned aerial vehicle systems: close range photogrammetry (UAV-CRP) data analysis. PhD thesis, University of Texas at Arlington, USA.

Couto, A and Couto, J (2007) Why deconstruction is not adequately considered in Portuguese building refurbishment. In: Boyd, D (ed.) Proceedings of 23rd Annual ARCOM Conference, 3-5 September 2007, Belfast, UK.

Crawford, R H and Pullen, S (2011) Life cycle water analysis of a residential building and its occupants. Building Research & Information, 39(6), pp. 589-602. ISSN 0961-3218

Cripps, A (2004) Cardboard as a construction material: A case study. Building Research & Information, 32(3), pp. 207-219. ISSN 0961-3218

Cruz Rios, F (2018) Beyond recycling: Design for disassembly, reuse, and circular economy in the built environment. PhD thesis, Arizona State University, USA.

Dai, H; Cao, G and Su, H (2006) Management and construction of the three gorges project. Journal of Construction Engineering and Management, 132(6), pp. 615-619. ISSN 0733-9364

Dai, J; Goodrum, P M and Maloney, W F (2007) Analysis of craft workers' and foremen's perceptions of the factors affecting construction labour productivity. Construction Management and Economics, 25(11), pp. 1139-1152. ISSN 01446193

Danso, H; Obeng-Ahenkora, N K and Manu, D (2021) Prices trend of selected building and construction materials on Ghanaian construction market: 2011–2016. International Journal of Construction Management, 21(3), pp. 284-291. ISSN 1562-3599

Daoud, A O; Othman, A A E; Ebohon, O J and Bayyati, A (2022) Overcoming the limitations of the green pyramid rating system in the Egyptian construction industry: A critical analysis. Architectural Engineering and Design Management, 18(2), pp. 114-127. ISSN 1745-2007

Dardouri, S; BuHamdan, S; Al Balkhy, W; Dakhli, Z; Danel, T and Lafhaj, Z (2023) RFID platform for construction materials management. International Journal of Construction Management, 23(14), pp. 2509-2519. ISSN 1562-3599

Darwish, M; Elsayed, A Y and Nassar, K (2018) Design and constructability of a novel funicular arched steel truss falsework. Journal of Construction Engineering and Management, 144(3): 04018002, ISSN 0733-9364

Datta, S D; Rana, M J; Assafi, M N; Mim, N J and Ahmed, S (2023) Investigation on the generation of construction wastes in Bangladesh. International Journal of Construction Management, 23(13), pp. 2260-2269. ISSN 1562-3599

De Jarnette, V; McCarthy, L M; Bennert, T and Guercio, M C (2013) Use of mechanistic-empirical pavement design principles to assign asphalt pavement pay factor adjustments. Journal of Construction Engineering and Management, 139(11): 4013024, ISSN 0733-9364

Del Solar, P; Del Río, M; Villoria, P and Nadal, A (2016) Analysis of recurrent defects in the execution of ceramic-coatings cladding in building construction. Journal of Construction Engineering and Management, 142(4): 04015093, ISSN 0733-9364

Delaney, F T and Wamuziri, S C (2002) Corporate profitability in construction and allied industries. Journal of Financial Management of Property and Construction, 7(2), pp. 107-116. ISSN 1366-4387

Delgado, J M P Q; Ramos, N M M; Barreira, E and Simões, M L (2014) Probabilistic risk assessment methodology of exterior surfaces defacement caused by algae growth. Journal of Construction Engineering and Management, 140(12): 05014012, ISSN 0733-9364

Dewlaney, K S; Hallowell, M R and Fortunato Iii, B R (2012) Safety risk quantification for high performance sustainable building construction. Journal of Construction Engineering and Management, 138(8), pp. 964-971. ISSN 0733-9364

Dias, Sara Maria Santos Soares (2023) Design, development and validation of construction elements made of composite wood waste. PhD thesis, Universidade de Coimbra, Portugal.

Din, Z U and Bernold, L E (2017) Experimental study of signal behavior for wireless communication in construction. Construction Innovation, 17(4), pp. 475-491. ISSN 1471-4175

Dinh, T H; Dinh, T H and Götze, U (2024) Roadworks design: Study on selection of construction materials in the preliminary design phase based on economic performance. International Journal of Construction Management, 24(5), pp. 503-511. ISSN 1562-3599

Dixit, M K (2017) Embodied energy and cost of building materials: Correlation analysis. Building Research & Information, 45(5), pp. 508-523. ISSN 0961-3218

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Domínguez-Herrera, M M; González-Morales, O and González-Díaz, E (2023) Social responsibility of construction company as strategy for sustainability in island territories. Construction Economics and Building, 23(1-2), pp. 30-55. ISSN 2204-9029

Donyavi, S and Flanagan, R (2011) Tracking and positioning technology and its applications for supply chain materials for small and medium enterprises (SMEs) on construction sites. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Donyavi, S; Flanagan, R; Assadi-Langroudi, A and Parisi, L (2024) Understanding the complexity of materials procurement in construction projects to build a conceptual framework influencing supply chain management of msmes. International Journal of Construction Management, 24(2), pp. 177-186. ISSN 1562-3599

Dorignon, L; Oswald, D; Kempton, L; Boehme, T; Iyer-Raniga, U; Moore, T and Dalton, T (2024) Investigating residential building materials in a circular economy: An Australian perspective. Journal of Construction Engineering and Management, 150(9): 04024115, ISSN 0733-9364

Ebekozien, A.; Thwala, W. D. and Samsurijan, M. S. (2026) Appraising circular economy business model adoption in construction projects to achieving Sustainable Development Goal 11. International Journal of Building Pathology and Adaptation, 44(3), pp. 685-703. ISSN 2398-4708

Echeverry, D; Majana, E and Acevedo, F (2007) Affordable housing in Latin America: Improved role of the academic sector in the case of Colombia. Journal of Construction Engineering and Management, 133(9), pp. 684-689. ISSN 0733-9364

Echezona, O N (2011) Client perception of engineering and construction services management in present-day Iraq: An exploratory study and assessment. PhD thesis, Walden University, USA.

Edike, U E; Ameh, O J; Adenuga, O A and Akintunde, O P (2024) Life cycle energy analysis of houses incorporating conventional and alternative masonry units. Architectural Engineering and Design Management, 20(5), pp. 1079-1099. ISSN 1745-2007

Egwunatum, S I; Anumudu, A C; Eze, E C and Awodele, I A (2022) Total quality management (TQM) implementation in the Nigerian construction industry. Engineering, Construction and Architectural Management, 29(1), pp. 354-382. ISSN 0969-9988

Ekenel, M (2004) Durability performance of advanced construction materials. PhD thesis, University of Missouri - Rolla, USA.

Ekström, D (2019) Integrated structural and construction engineering: a study of project team performance in Swedish bridge design. PhD thesis, Chalmers University of Technology, Sweden.

El-Mahdy, D and Ali, M (2024) Assessing the solar radiation performance of self-shaded 3D-printed clay-based façades. Architectural Engineering and Design Management, 20(2), pp. 249-268. ISSN 1745-2007

El-Sawalhi, N I and Ajwa, H E A (2013) Mud building practices in construction projects in the Gaza Strip. International Journal of Construction Management, 13(2), pp. 13-26. ISSN 1562-3599

Eldin, N N and Senouci, A B (1992) Use of scrap tires in road construction. Journal of Construction Engineering and Management, 118(3), pp. 561-576. ISSN 0733-9364

Elliot, C and Palmer, A (1996) Life cycle energy analysis of the building resource. Journal of Financial Management of Property and Construction, 1(2), pp. 5-16. ISSN 1366-4387

Elmisalami, T; Walters, R and Jaselskis, E J (2006) Construction IT decision making using multiattribute utility theory for use in a laboratory information management system. Journal of Construction Engineering and Management, 132(12), pp. 1275-1283. ISSN 0733-9364

Emmer, M J (2009) A decision process model for closing the structural steel materials loop in construction. PhD thesis, University of Florida, USA.

Emuze, F; Linake, M and Seboka, L (2016) Construction work and the housekeeping challenge in Lesotho. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

English, J; Haupt, T C and Smallwood, J J (2006) Women, construction and health and safety (H&S): South African and Tanzanian perspectives. Journal of Engineering, Design and Technology, 4(1), pp. 18-28. ISSN 1726-0531

Enshassi, A; Al-Najjar, J and Kumaraswamy, M (2009) Delays and cost overruns in the construction projects in the Gaza Strip. Journal of Financial Management of Property and Construction, 14(2), pp. 126-151. ISSN 1366-4387

Enshassi, A; Kumaraswamy, M and Jomah, A N (2010) Significant factors causing time and cost overruns in construction projects in the Gaza Strip: Contractors' perspective. International Journal of Construction Management, 10(1), pp. 35-60. ISSN 1562-3599

Ernest, K; Samuel, A S; Agyemang, D Y; Daniel, O and Caleb, D (2022) Identification of factors influencing the pricing of sustainable construction materials in developing countries: Views of Ghanaian quantity surveyors. International Journal of Construction Management, 22(11), pp. 2144-2153. ISSN 1562-3599

Essaghouri, L.; Xu, F.; Zhu, C.; Aletoum, E. and Li, X. (2026) Two decades of embodied carbon in MENA's construction sector: Regional insights and policy implications. Journal of Construction Engineering and Management, 152(10): 04026171, ISSN 0733-9364

Essah, E A; Russell, S J; Waring, S D; Ferguson, J; Williams, C; Walsh, K; Dyer, S and Raynor, R (2020) Method for evaluating the snagging propensity of roofing membranes in buildings by roosting bats. Building Research & Information, 48(8), pp. 886-898. ISSN 0961-3218

Faghih, S A M and Kashani, H (2018) Forecasting construction material prices using vector error correction model. Journal of Construction Engineering and Management, 144(8): 04018075, ISSN 0733-9364

Fang, Y and Cho, Y K (2017) Effectiveness analysis from a cognitive perspective for a real-time safety assistance system for mobile crane lifting operations. Journal of Construction Engineering and Management, 143(4): 05016025, ISSN 0733-9364

Fang, Y and Ng, S T (2011) Applying activity-based costing approach for construction logistics cost analysis. Construction Innovation, 11(3), pp. 259-281. ISSN 1471-4175

Fang, Y and Ng, S T (2019) Genetic algorithm for determining the construction logistics of precast components. Engineering, Construction and Architectural Management, 26(10), pp. 2289-2306. ISSN 0969-9988

Fasakin, J O and Ogunsemi, D R (2003) Modelling the selling prices of residential buildings in Nigeria. Journal of Financial Management of Property and Construction, 8(2), pp. 111-114. ISSN 1366-4387

Ferrada, X and Serpell, A (2014) Selection of construction methods for construction projects: A knowledge problem. Journal of Construction Engineering and Management, 140(4): B4014002, ISSN 0733-9364

Flanagan, R; Norman, G and Worrall, H (1995) Trade performance of the UK building materials and components industries. Engineering, Construction and Architectural Management, 2(2), pp. 141-162. ISSN 0969-9988

Flores Salas, A (2016) Evaluation of the use of lightweight concrete panels for post disaster house reconstruction using Building Information Modelling. PhD thesis, University of Manchester, UK.

Florez, L; Castro, D and Irizarry, J (2013) Measuring sustainability perceptions of construction materials. Construction Innovation, 13(2), pp. 217-234. ISSN 1471-4175

Formoso, C T; Soibelman, L; De Cesare, C and Isatto, E L (2002) Material waste in building industry: Main causes and prevention. Journal of Construction Engineering and Management, 128(4), pp. 316-325. ISSN 0733-9364

Freitas, J A; Sanquetta, C R; Iwakiri, S and de Mello Maron da Costa, M D R (2021) The use of wood construction materials as a way of carbon storage in residential buildings in Brazil. International Journal of Construction Management, 21(3), pp. 292-298. ISSN 1562-3599

Frischknecht, R; Alig, M; Nathani, C; Hellmüller, P and Stolz, P (2020) Carbon footprints and reduction requirements: The Swiss real estate sector. Buildings & Cities, 1(1), pp. 325-336. ISSN 2632-6655

Fu, E; Newell, D; Becker, A; Schwegler, B and Fischer, M (2013) Is adaptation sustainable? A method to estimate climate-critical construction resource capacity. Construction Innovation, 13(2), pp. 202-216. ISSN 1471-4175

García de Soto, B (2014) A methodology to make accurate preliminary estimates of construction material quantities for construction projects. DSc thesis, ETH Zürich, Switzerland.

García de Soto, B; Adey, B T and Fernando, D (2017) A hybrid methodology to estimate construction material quantities at an early project phase. International Journal of Construction Management, 17(3), pp. 165-196. ISSN 1562-3599

Genc, O (2021) Symbioconstruction: A bibliography-driven dynamic construction industry symbiosis database. Journal of Construction Engineering and Management, 147(8): 04021077, ISSN 0733-9364

Georgekutty, C K (2014) Optimization of construction cost in construction materials. Unpublished PhD thesis, Cochin University of Science and Technology, India.

Georgy, M and Basily, S Y (2008) Using genetic algorithms in optimizing construction material delivery schedules. Construction Innovation, 8(1), pp. 23-45. ISSN 1471-4175

Gerber, B and Ekenel, M (2013) Building code requirements for inspection of adhesive anchors in concrete. Journal of Construction Engineering and Management, 139(10): 06013001, ISSN 0733-9364

Ghafoori, M and Abdallah, M (2025) Multi-criteria decision support model for material and supplier selection in the construction industry. International Journal of Construction Management, 25(4), pp. 409-418. ISSN 1562-3599

Ghansah, F A; Lu, W and Ababio, B K (2024) Modelling the critical challenges of quality assurance of cross-border construction logistics and supply chain during the COVID-19 pandemic. Engineering, Construction and Architectural Management, 31(5), pp. 2128-2150. ISSN 0969-9988

Gholami Rostam, Mehdi (2024) Energy efficiency assessment in building designs integrating climate resilience and long-term environmental sustainability. PhD thesis, University of New South Wales, Australia.

Gibson, G E and Bell, L C (1992) Integrated data-base systems. Journal of Construction Engineering and Management, 118(1), pp. 50-59. ISSN 0733-9364

Goodrum, P M and Haas, C T (2004) Long-term impact of equipment technology on labor productivity in the U.S. Construction industry at the activity level. Journal of Construction Engineering and Management, 130(1), pp. 124-133. ISSN 0733-9364

Goodrum, P M; Zhai, D and Yasin, M F (2009) Relationship between changes in material technology and construction productivity. Journal of Construction Engineering and Management, 135(4), pp. 278-287. ISSN 0733-9364

Gounder, S; Hasan, A; Shrestha, A and Elmualim, A (2023) Barriers to the use of sustainable materials in Australian building projects. Engineering, Construction and Architectural Management, 30(1), pp. 189-209. ISSN 0969-9988

Graham, D; Smith, S D and Tommelein, I D (2005) Cost of concrete placement for contractors. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Graversen, H (2022) Interchanges: Construction of the U.S. Interstate highway system and artistic practice, 1956-1984. PhD thesis, University of Chicago, USA.

Grifa, M A (2006) The construction industry in Libya , with particular reference to operations in Tripoli. PhD thesis, University of Newcastle upon Tyne, UK.

Grist, E (2014) The implementation of innovative and sustainable construction materials. EngD thesis, University of Bath, UK.

Guggemos, A A (2003) Environmental impacts of on-site construction processes: Focus on structural frames. PhD thesis, University of California, Berkeley, USA.

Gurmu, A T (2019) Tools for measuring construction materials management practices and predicting labor productivity in multistory building projects. Journal of Construction Engineering and Management, 145(2): 4018139, ISSN 0733-9364

Gurmu, A T (2020) Construction materials management practices enhancing labour productivity in multi-storey building projects. International Journal of Construction Management, 20(1), pp. 77-86. ISSN 1562-3599

Gurmu, Argaw (2017) An investigation into construction management practices influencing labour productivity in multi-storey building projects. PhD thesis, University of Melbourne, Australia.

Gyimah, S; Owusu-Manu, D G; Edwards, D J; Buertey, J I T and Danso, A K (2025) Exploring the contributions of circular business models towards the transition of green economy in the Ghanaian construction industry. Smart and Sustainable Built Environment, 14(3), pp. 859-880. ISSN 2046-6099

Göswein, V; Arehart, J; Phan-Huy, C; Pomponi, F and Habert, G (2022) Barriers and opportunities of fast-growing biobased material use in buildings. Buildings & Cities, 3(1), pp. 745-755. ISSN 2632-6655

Haddad, A N; Silva, A B; Hammad, A W A; Najjar, M K; Vazquez, E G and Tam, V W Y (2023) An integrated approach of building information modelling and life cycle assessment (BIM-LCA) for gas and solar water heating systems. International Journal of Construction Management, 23(14), pp. 2452-2468. ISSN 1562-3599

Haga, Heitor Cesar Riogi (2008) Production and sales sectors of materials in the house construction production chain: Diagnosis for the development of technological foresight studies. PhD thesis, Universidade de São Paulo, Brazil.

Haghighi, Z (2022) Architectural photovoltaic application. PhD thesis, Delft University of Technology, Netherlands.

Hailemariam, E K; Hailemariam, L M; Amede, E A and Nuramo, D A (2023) Identification of barriers, benefits and opportunities of using bamboo materials for structural purposes. Engineering, Construction and Architectural Management, 30(7), pp. 2716-2738. ISSN 0969-9988

Hamilton-MacLaren, F (2013) Alternative, more sustainable, wall construction techniques than brick and block, for new housing in England and Wales. PhD thesis, Loughborough University, UK.

Hamilton-MacLaren, F; Loveday, D and Mourshed, M (2009) The calculation of embodied energy in new build UK housing. In: Dainty, A R J (ed.) Proceedings of 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, UK.

Hansen, A R; Gram-Hanssen, K and Knudsen, H N (2018) How building design and technologies influence heat-related habits. Building Research & Information, 46(1), pp. 83-98. ISSN 0961-3218

Hassanein, M A A G (1990) Mechanisms for transfer of price risk of construction materials. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Heaton, R; Martin, H; Chadee, A; Milling, A; Dunne, S and Borthwick, F (2022) The construction materials conundrum: Practical solutions to address integrated supply chain complexities. Journal of Construction Engineering and Management, 148(8): 04022071, ISSN 0733-9364

Heljedal M, P F (2013) Sustainable intermodal transportation of prefabricated construction materials. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Henry Duncan John, M; Amoah, C and Ayesu-Koranteng, E (2022) Causes of road projects' delays: A case of blantyre, Malawi. Built Environment Project and Asset Management, 12(2), pp. 293-308. ISSN 2044-124X

Hernandezgaytan, V H (2022) The reemergence of a geotechnical, special inspection, and construction material testing firm. DEng thesis, Texas A&M University, USA.

Hindman, D P; Bamberg, C R and Nussbaum, M A (2014) Bracing of wood composite I-joists to resist lateral buckling from walking loads. Journal of Construction Engineering and Management, 140(9): 04014037, ISSN 0733-9364

Hindman, D P; Timko, P D and Nussbaum, M A (2013) Mechanical response of unbraced wood composite I-joist to walking loads. Journal of Construction Engineering and Management, 139(11): 4013023, ISSN 0733-9364

Hinze, J and Hinze, M M (1986) Problems associated with removal of asbestos. Journal of Construction Engineering and Management, 112(2), pp. 211-219. ISSN 0733-9364

Hitt, S J; Hairstans, R; Oloke, D; Bertasso, S; Tamagnone, G and Shirley, B (2024) Developing modern construction professionals with a focus on timber – a UK case study. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 178(1), pp. 32-40. ISSN 17514304

Hollister, K C (1992) An extended structured query language incorporating object data types for the construction industry. PhD thesis, University of Florida, USA.

Hong, T (2005) Life-cycle cost assessment model of composite materials in construction. PhD thesis, Purdue University, USA.

Hopkin, D J (2011) The fire performance of engineered timber products and systems. EngD thesis, Loughborough University, UK.

Horman, M J and Thomas, H R (2005) Role of inventory buffers in construction labor performance. Journal of Construction Engineering and Management, 131(7), pp. 834-843. ISSN 0733-9364

Horvath, A (1997) Estimation of environmental implications of construction materials and designs using life cycle assessment techniques. PhD thesis, Carnegie Mellon University, USA.

Hosseini Sabzevari, S A; Mottaki, Z; Hassani, A; Zandiyeh, S and Aslani, F (2023) Temporary housing site selection in soffeh mountain, district 5 of Isfahan, Iran. International Journal of Disaster Resilience in the Built Environment, 14(5), pp. 611-627. ISSN 1759-5916

Hoxha, V (2020) Measuring embodied CO2 emission in construction materials in Kosovo apartments. International Journal of Building Pathology and Adaptation, 38(3), pp. 405-421. ISSN 23984708

Hsieh, H Y and Forster, J (2006) Residential construction quality and production levels in Taiwan. Engineering, Construction and Architectural Management, 13(5), pp. 502-520. ISSN 0969-9988

Hsieh, T-Y (1993) Functional requirements for large-scale manipulators in industrial construction. PhD thesis, University of Texas at Austin, USA.

Hu, M; Bergsdal, H; Van Der Voet, E; Huppes, G and Muller, D B (2010) Dynamics of urban and rural housing stocks in China. Building Research & Information, 38(3), pp. 301-317. ISSN 0961-3218

Hu, W; Shu, X; Jia, X and Huang, B (2017) Recommendations on intelligent compaction parameters for asphalt resurfacing quality evaluation. Journal of Construction Engineering and Management, 143(9): 04017065, ISSN 0733-9364

Huynh, N. M.; Bui, P. T.; Le-Hoai, L. and Tang, M. N. (2026) Prioritizing actions to mitigate causes of material waste in construction using quality function deployment. Construction Economics and Building, 26(2), ISSN 2204-9029

Hwang, S; Park, M; Lee, H S and Kim, H (2012) Automated time-series cost forecasting system for construction materials. Journal of Construction Engineering and Management, 138(11), pp. 1259-1269. ISSN 0733-9364

Hwang, Y; Kim, T; Ryu, J and Yang, K (2025) Collaborative bricklaying with a robotic arm using a head-mounted camera in construction. Journal of Construction Engineering and Management, 151(12): 04025204, ISSN 0733-9364

Ibrahim, K (2019) A framework for ethical sourcing of construction materials. PhD thesis, Nelson Mandela University, South Africa.

Islam, R; Chowdhury, S; Jannat, N and Paul, P (2022) Carbon footprint evaluation of local dwellings in Bangladesh towards low carbon society. Built Environment Project and Asset Management, 12(3), pp. 433-446. ISSN 2044-124X

Jafari, A and Love, P E D (2013) Quality costs in construction: Case of Qom monorail project in iran. Journal of Construction Engineering and Management, 139(9), pp. 1244-1249. ISSN 0733-9364

Jang, H (2002) Construction material logistics: Project manager level of satisfaction and facilities layout planning. PhD thesis, University of Wisconsin - Madison, USA.

Jang, W S (2007) Embedded system for construction material tracking using combination of radio frequency and ultrasound signal. PhD thesis, University of Maryland, College Park, USA.

Jang, W S and Skibniewski, M J (2009) Cost-benefit analysis of embedded sensor system for construction materials tracking. Journal of Construction Engineering and Management, 135(5), pp. 378-386. ISSN 0733-9364

Jarkas, A M (2010) The effects of buildability factors on rebar fixing labour productivity of isolated foundations. International Journal of Construction Management, 10(2), pp. 33-51. ISSN 1562-3599

Jayasinghe, R S; Rameezdeen, R and Chileshe, N (2023) Modelling the cause and effect relationship risks in reverse logistics supply chains for demolition waste. Engineering, Construction and Architectural Management, 30(9), pp. 4018-4044. ISSN 0969-9988

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Risk allocation model for price escalations in construction projects: Integrating bargaining game theory and probabilistic Bayesian modeling. Journal of Construction Engineering and Management, 151(9): 04025134, ISSN 0733-9364

Jezzini, Y; Assaad, R H and El-Adaway, I H (2025) Modeling framework to quantify and gauge project cost risks due to construction material price volatilities using predictive probabilistic deep-learning algorithms and stochastic risk modeling. Journal of Construction Engineering and Management, 151(7): 04025071, ISSN 0733-9364

Jiang, X; Zhou, H; Li, M; Lu, K; Lyu, S; Omrani, S and Skitmore, M (2024) Sustainable construction projects management in the AEC industry: Analysis and visualization. International Journal of Construction Management, 24(4), pp. 384-399. ISSN 1562-3599

Jin, R (2013) A statistical modeling approach to studying the effects of alternative and waste materials on green concrete properties. PhD thesis, Ohio State University, USA.

Jobst, J W (2009) What resident engineers should know about risk management. Journal of Construction Engineering and Management, 135(6), pp. 437-438. ISSN 0733-9364

Jones, W; Gibb, A; Goodier, C and Bust, P (2017) Managing the unknown: Addressing the potential health risks of nanomaterials in the built environment. Construction Management and Economics, 35(3), pp. 122-136. ISSN 0144-6193

Jung, C; Ismail, M A; Arar, M and AlQassimi, N (2026) Mitigating indoor air pollution in uae's high-rise apartment buildings: A study on eco-friendly materials and adsorbents. Smart and Sustainable Built Environment, 15(1), pp. 40-61. ISSN 2046-6099

Junussova, T. and Nadeem, A. (2026) Modelling sustainable construction material management implementation strategy indicators in developed economies. International Journal of Construction Management, 26(9), pp. 1925-1943. ISSN 1562-3599

Kar, S (2021) Developing a decision support system for effective material management in construction. PhD thesis, Indian Institute of Technology Delhi, India.

Kar, S and Jha, K N (2021) Investigation into lead time of construction materials and influencing factors. Journal of Construction Engineering and Management, 147(3): 01998, ISSN 0733-9364

Kar, S and Jha, K N (2022) Assessing criticality of construction materials for prioritizing their procurement using ANP-TOPSIS. International Journal of Construction Management, 22(10), pp. 1852-1862. ISSN 1562-3599

Karami, S (2008) Using by-product industrial materials to replace all cement in construction products. PhD thesis, Coventry University, UK.

Karatai, T R; Kaluli, J W; Kabubo, C and Thiong'O, G (2017) Soil stabilization using rice husk ash and natural lime as an alternative to cutting and filling in road construction. Journal of Construction Engineering and Management, 143(5): 04016127, ISSN 0733-9364

Karri, S K; Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(1), pp. 42-59. ISSN 1726-0531

Karunasena, G; Gajanayake, A; Wijeratne, W M P U; Milne, N; Udawatta, N; Perera, S; Crimston, A and Aliviano, P (2024) Liquid waste management in the construction sector: A systematic literature review. International Journal of Construction Management, 24(1), pp. 86-96. ISSN 1562-3599

Kern, A P; Postay, R; Schneck, E R; Mancio, M; González, M A S and Guerra, G (2021) Cost and environmental impacts reduction through building compactness. Engineering, Construction and Architectural Management, 28(4), pp. 1176-1195. ISSN 0969-9988

Khan, A; Do, J and Kim, D (2017) Experimental optimization of high-strength self-compacting concrete based on D-optimal design. Journal of Construction Engineering and Management, 143(4): 04016108, ISSN 0733-9364

Kikuchi, S; Kronprasert, N and Easa, S M (2012) Aggregate blending using fuzzy optimization. Journal of Construction Engineering and Management, 138(12), pp. 1411-1420. ISSN 0733-9364

Kikwasi, G and Mbuya, E (2019) Vulnerability analysis of building structures to floods: The case of flooding informal settlements in Dar es Salaam, Tanzania. International Journal of Building Pathology and Adaptation, 37(5), pp. 629-656. ISSN 23984708

Kim, S. and Liang, Y. (2026) Dissecting highway construction cost inflation: A two-decade analysis of inflation types using the national highway construction cost index. Journal of Construction Engineering and Management, 152(7): 04026087, ISSN 0733-9364

Kim, A (2024) A comprehensive approach to industrial decarbonization efforts within the building materials sector. PhD thesis, University of California, Davis, USA.

Kim, C; Kim, H; Ryu, J and Kim, C (2011) Ubiquitous sensor network for construction material monitoring. Journal of Construction Engineering and Management, 137(2), pp. 158-165. ISSN 0733-9364

Kim, C W; Kim, T; Lee, U K; Cho, H and Kang, K I (2016) Advanced steel beam assembly approach for improving safety of structural steel workers. Journal of Construction Engineering and Management, 142(4): 05015019, ISSN 0733-9364

Kim, S and Hammad, A (2024) Decision support system (DSS) for selecting sustainable insulation material using Pareto search and novel fuzzy-modified technique for order of preference by similarity to ideal solution (TOPSIS) approach. International Journal of Construction Management, 24(7), pp. 734-747. ISSN 1562-3599

Kim, T; Lim, H; Cho, H and Kang, K I (2014) Automated lifting system integrated with construction hoists for table formwork in tall buildings. Journal of Construction Engineering and Management, 140(10): 04014049, ISSN 0733-9364

Kirgiz, M S (2011) Chemical properties of blended cement pastes. Journal of Construction Engineering and Management, 137(12), pp. 1036-1042. ISSN 0733-9364

Kolawole, O M (2023) A model for improving ethics in construction materials and products supply chain using blockchain. PhD thesis, London South Bank University, UK.

Kong, C W; li, H and Love, P E D (2001) An e-commerce system for construction material procurement. Construction Innovation, 1(1), pp. 43-54. ISSN 1471-4175

Kong, S C W; li, H and Shen, L Y (2001) An internet-based electronic product catalogue of construction materials. Construction Innovation, 1(4), pp. 245-257. ISSN 1471-4175

Koo, K J and Park, S C (2012) GA-based fuel-efficient transfer path selection model for delivering construction materials. Journal of Construction Engineering and Management, 138(6), pp. 725-732. ISSN 0733-9364

Koushki, P A and Kartam, N (2004) Impact of construction materials on project time and cost in Kuwait. Engineering, Construction and Architectural Management, 11(2), pp. 126-132. ISSN 0969-9988

Kuittinen, M (2016) Does the use of recycled concrete lower the carbon footprint in humanitarian construction? International Journal of Disaster Resilience in the Built Environment, 7(5), pp. 472-488. ISSN 1759-5916

Laguarda Mallo, M F (2017) Critical factors in the willingness to adopt innovative woodbased building materials in the construction industry: The case of CLT. PhD thesis, University of Minnesota, USA.

Lan, A and Galy, B (2017) Evaluation of a horizontal lifeline system used during installation of residential roofs. Journal of Construction Engineering and Management, 143(5): 06016008, ISSN 0733-9364

Lara, Beatriz Leão Evangelista de (2024) Construction and demolition waste prevention analysis of benefits in the context of social housing. PhD thesis, Universidade Estadual de Campinas, Brazil.

Lee, J; Jang, K; Sparkling, A E and Kang, K (2026) Large language model-based construction site management for severe weather preparedness. Journal of Construction Engineering and Management, 152(1): 04025220, ISSN 0733-9364

Lee, D; Lee, S G and Kim, S (2017) Composite phase-change material mold for cost-effective production of free-form concrete panels. Journal of Construction Engineering and Management, 143(6): 04017012, ISSN 0733-9364

Lee, F-P B (2009) Factors affecting the profitability of construction companies in Hong Kong. PhD thesis, University of Hong Kong, Hong Kong.

Lensgraf, S E (2024) Towards scalable autonomous underwater construction with free-floating robots. PhD thesis, Dartmouth College, USA.

Lessing, J and Brege, S (2018) Industrialized building companies' business models: Multiple case study of Swedish and North American companies. Journal of Construction Engineering and Management, 144(2): 05017019, ISSN 0733-9364

Li, H; Kong, C W; Pang, Y C; Shi, W Z and Yu, L (2003) Internet-based geographical information systems system for e-commerce application in construction material procurement. Journal of Construction Engineering and Management, 129(6), pp. 689-697. ISSN 0733-9364

Li, M G; Chen, J J; Xu, A J; Xia, X H and Wang, J H (2014) Case study of innovative top-down construction method with channel-type excavation. Journal of Construction Engineering and Management, 140(5): 05014003, ISSN 0733-9364

Li, W (2008) An agent-based negotiation model for the sourcing of construction suppliers. PhD thesis, University of Hong Kong, Hong Kong.

Li, X; Li, J; He, J; Huang, Y; Liu, X; Dai, J and Shen, Q (2024) What are the key factors of enterprises' greenwashing behaviors under multi-agent interaction? A grey-DEMATEL analysis from Chinese construction materials enterprises. Engineering, Construction and Architectural Management, 31(11), pp. 4659-4676. ISSN 0969-9988

Liang, Y (2006) Integrated IT systems for construction site management. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Lin Htet, N.; Peansupap, V. and Kaewmoracharoen, M. (2026) Influence of material attribute context and document layout variability on large language model performance in construction material specification. International Journal of Construction Management, 26(8), pp. 1669-1689. ISSN 1562-3599

Liu, J; Olsen, D A and Hein, M F (2011) Enhancing construction education using an online multimedia collection. International Journal of Construction Education and Research, 7(2), pp. 85-108. ISSN 1557-8771

Liu, Y and Mohamed, Y (2012) Modelling industrial construction operations using a multi-agent resource allocation framework. Engineering, Construction and Architectural Management, 19(4), pp. 406-427. ISSN 0969-9988

Llabrés-Morey, M A; Hormigos-Jimenez, S and del Rio Merino, M (2025) Evaluation of CO2 and tvoc concentration in a school in palma during the month of june. Building Research & Information, 53(1-2), pp. 95-119. ISSN 0961-3218

Lochau-Emden, G H (1983) A manufacturers' exchange as a source of information for strategic management and an economic stabilising aid in the building and construction sector: A theoretical and empirical study. DBA thesis, University of Pretoria, South Africa.

Louis, J and Dunston, P S (2017) Methodology for real-time monitoring of construction operations using finite state machines and discrete-event operation models. Journal of Construction Engineering and Management, 143(3): 04016106, ISSN 0733-9364

Lovencin, W (2006) Assessment of design and properties for flowable fill usage in highway pavement construction for conditions in Florida. PhD thesis, University of Florida, USA.

Lovrenčić Butković, L; Mihić, M and Sigmund, Z (2023) Assessment methods for evaluating circular economy projects in construction: A review of available tools. International Journal of Construction Management, 23(5), pp. 877-886. ISSN 1562-3599

Lu, W; Tan, T; Xu, J; Wang, J; Chen, K; Gao, S and Xue, F (2021) Design for manufacture and assembly (DfMA) in construction: The old and the new. Architectural Engineering and Design Management, 17(1-2), pp. 77-91. ISSN 1745-2007

Magdy, M; Abdel-Monem, M and El Dash, K (2022) Float loss impact on project cost. International Journal of Construction Management, 22(9), pp. 1647-1656. ISSN 1562-3599

Mahpour, A and Mortaheb, M M (2018) Financial-based incentive plan to reduce construction waste. Journal of Construction Engineering and Management, 144(5): 04018029, ISSN 0733-9364

Maisarah, F; Abduh, M; Wirahadikusumah, R and Cakravastia, A (2025) Development of the conceptual business model of a third-party logistics provider for Indonesian small contractors. International Journal of Construction Management, 25(2), pp. 194-203. ISSN 1562-3599

Majrouhi Sardroud, J (2011) Assessment and development of radio frequency identification applications for effective management of construction activities. PhD thesis, Kingston University, UK.

Manrique, J D; Al-Hussein, M; Bouferguene, A; Safouhi, H and Nasseri, R (2011) Combinatorial algorithm for optimizing wood waste in framing designs. Journal of Construction Engineering and Management, 137(3), pp. 188-197. ISSN 0733-9364

Marantzidis, I and Gidado, K (2011) The maximisation of the use of reclaimed asphalt pavement (RAP) in the Greek construction industry. In: Egbu, C and Lou, E C W (eds.) Proceedings of 27th Annual ARCOM Conference, 5-7 September 2011, Bristol, UK.

Marciano, E J (2003) Sustainable development and the cement and concrete industries. PhD thesis, Universite de Sherbrooke, Canada.

Marey Madi, H A (2024) Sustainability assessment of using green concrete materials for residential buildings in Egypt. PhD thesis, Debreceni Egyetem, Hungary.

Marrana, T C; Silvestre, J D; De Brito, J and Gomes, R (2017) Lifecycle cost analysis of flat roofs of buildings. Journal of Construction Engineering and Management, 143(6): 04017014, ISSN 0733-9364

Marsh, L (1998) Portable datafiles in the construction supply chain. PhD thesis, University of Reading, UK.

Marsh, L E and Finch, E F (1999) Using portable datafiles in the construction supply chain. Building Research & Information, 27(3), pp. 127-139. ISSN 0961-3218

Martino, Antonello (2017) The historical landscape of ports: From the definition of a methodology for the risk assessment to the identification of guidelines for port heritage preservation. PhD thesis, Politecnico di Bari, Italy.

Marzouk, M and Amin, A (2013) Predicting construction materials prices using fuzzy logic and neural networks. Journal of Construction Engineering and Management, 139(9), pp. 1190-1198. ISSN 0733-9364

Matthews, J C and Stowe, R (2015) Critical data needs associated with asbestos cement pipe renewal methods. Journal of Construction Engineering and Management, 141(1): 06014009, ISSN 0733-9364

Mello Saraiva Caldeira, L M and Brito, A (2014) Use of soil-rock mixtures in dam construction. Journal of Construction Engineering and Management, 140(8): 04014030, ISSN 0733-9364

Meng, J; Yan, J; Xue, B; Fu, J and He, N (2018) Reducing construction material cost by optimizing buy-in decision that accounts the flexibility of non-critical activities. Engineering, Construction and Architectural Management, 25(8), pp. 1092-1108. ISSN 0969-9988

Meraghni, Leila (1997) An integrated information model for construction materials management. PhD thesis, Liverpool John Moores University, UK.

Mergel, C; Decker, T and Menrad, K (2023) Affinity towards flexible housing–a study among homeowners in Germany. Building Research & Information, 51(8), pp. 871-880. ISSN 0961-3218

Minchin, R E; Cui, S; Walters, R C; Issa, R and Pan, J (2013) Sino-American opinions and perceptions of counterfeiting in the construction supply chain. Journal of Construction Engineering and Management, 139(1), pp. 1-8. ISSN 0733-9364

Mohamed, M (2022) A risk-based model for construction inspection in highways. PhD thesis, University of Kansas, USA.

Moncaster, A; Malmqvist, T; Forman, T; Pomponi, F and Anderson, J (2022) Embodied carbon of concrete in buildings, Part 2: Are the messages accurate? Buildings & Cities, 3(1), pp. 334-355. ISSN 2632-6655

Moon, S; Zekavat, P R and Bernold, L E (2017) Dynamic quality control of process resource to improve concrete supply chain. Journal of Construction Engineering and Management, 143(5): 04016130, ISSN 0733-9364

Moore, D R; Paterson, G and Martinez, R S (2004) Sustainable communities: A proposal linking the management of forestation and agricultural waste with the development of recyclable housing. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Morgado, J; Flores-Colen, I; De Brito, J and Silva, A (2017) Maintenance planning of pitched roofs in current buildings. Journal of Construction Engineering and Management, 143(7): 05017010, ISSN 0733-9364

Mostafa, S; Tam, V W; Dumrak, J and Mohamed, S (2020) Leagile strategies for optimizing the delivery of prefabricated house building projects. International Journal of Construction Management, 20(8), pp. 867-881. ISSN 1562-3599

Muguda, S; Hughes, P N; Augarde, C E; Perlot, C; Walter Bruno, A and Gallipoli, D (2022) Cross-linking of biopolymers for stabilizing earthen construction materials. Building Research & Information, 50(5), pp. 502-514. ISSN 0961-3218

Muya, M (1999) A systematic approach for improving construction materials logistics. PhD thesis, Loughborough University, UK.

Muya, M; Price, A D F and Thorpe, A (1997) Construction materials supply logistics. In: Stephenson, P (ed.) Proceedings of 13th Annual ARCOM Conference, 15-17 September 1997, Cambridge, UK.

Muya, M; Price, A D F and Thorpe, A (1998) Supplier evaluation of logistics factors and their contribution to improved customer service. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Muya, M; Price, A D F; Thorpe, A and Edum-Fotwe, F (1999) Application of analytic hierarchy process to the evaluation of logistics factors and their contribution to improvements in construction materials supply. Journal of Construction Procurement, 5(2), pp. 99-117. ISSN 1358-9180

Nabi, M A; El-Adaway, I H and Assaad, R H (2024) Modeling inflation transmission among different construction materials. Journal of Construction Engineering and Management, 150(5): 04024024, ISSN 0733-9364

Naderpajouh, N; Hastak, M; Gokhale, S; Bayraktar, M E; Iyer, A and Arif, F (2015) Counterfeiting risk governance in the capital projects supply chain. Journal of Construction Engineering and Management, 141(3), ISSN 0733-9364

Najjar, M K; Figueiredo, K; Evangelista, A C J; Hammad, A W A; Tam, V W Y and Haddad, A (2022) Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. International Journal of Construction Management, 22(4), pp. 541-555. ISSN 1562-3599

Narayana Naidelage, Chamari Pushpamali (2021) The role of reverse logistics on supply chain performance. PhD thesis, Queensland University of Technology, Australia.

Ndukwe, C. V.; Chan, T. K. and Gao, S. (2026) Challenges and improvements of an SME-oriented procurement policy in the construction sector: A case of victoria's local jobs first policy. Construction Management and Economics, 44(8), pp. 565-592. ISSN 0144-6193

Ndukwe, Chigozie Victor (2023) Impact of globalisation on the construction supply chain: Challenges and responses in Victoria. PhD thesis, University of Melbourne, Australia.

Neuman, Y; Alves, T D C L; Walsh, K D and Needy, K L (2015) Quantitative analysis of supplier quality surveillance practices in EPC projects. Journal of Construction Engineering and Management, 141(11): 04015039, ISSN 0733-9364

Ng, F P; Björnsson, H C and Chiu, S S (2004) Valuing a price cap contract for material procurement as a real option. Construction Management and Economics, 22(2), pp. 141-150. ISSN 01446193

Ng, S T; Shi, J and Fang, Y (2009) Enhancing the logistics of construction materials through activity-based simulation approach. Engineering, Construction and Architectural Management, 16(3), pp. 224-237. ISSN 0969-9988

Nicholas, J (2000) A risk analysis system for evaluating construction contractors by potential creditors. PhD thesis, University of Wolverhampton, UK.

Nicholas, J; Holt, G D and Harris, P T (1998) Financial business relationships: A conceptual model for evaluating contractors' creditworthiness. Journal of Financial Management of Property and Construction, 3(3), pp. 17-36. ISSN 1366-4387

Nicholas, J; Holt, G D and Harris, P T (2000) Suppliers' debt collection and contractor creditworthiness evaluation. Building Research & Information, 28(4), pp. 268-279. ISSN 0961-3218

Nicholas, J; Holt, G D and Mihsein, M (2000) Contractor financial credit limits; their derivation and implications for materials suppliers. Construction Management and Economics, 18(5), pp. 535-545. ISSN 01446193

Nicholas, J; Holt, G D and Mihsein, M (2000) Forecasting construction materials suppliers' financial turnover. Engineering, Construction and Architectural Management, 7(3), pp. 221-231. ISSN 0969-9988

Niknam, M (2015) A semantics-based approach to construction cost estimating. PhD thesis, Marquette University, USA.

Ning, X; Shan, M; Li, Z and Nie, Z (2025) Prediction of construction material prices based on the sliding window catboost model. Journal of Construction Engineering and Management, 151(12): 04025196, ISSN 0733-9364

Nouri, H; Safehian, M and Mir Mohammad Hosseini, S M (2023) Life cycle assessment of earthen materials for low-cost housing a comparison between rammed earth and fired clay bricks. International Journal of Building Pathology and Adaptation, 41(2), pp. 364-377. ISSN 23984708

Nwadike, A N and Wilkinson, S (2022) Why amending building codes? An investigation of the benefits of regular building code amendment in New Zealand. International Journal of Building Pathology and Adaptation, 40(1), pp. 76-100. ISSN 23984708

Nwagwu, C C; Akin, S and Hertwich, E G (2024) Modelling Nigerian residential dwellings: bottom-up approach and scenario analysis. Buildings & Cities, 5(1), pp. 521-539. ISSN 2632-6655

O'Connor, J T; Torres, N and Woo, J (2016) Sustainability actions during the construction phase. Journal of Construction Engineering and Management, 142(7): 4016016, ISSN 0733-9364

Obeng-Ahenkora, N. K.; Danso, H. and Kheni, N. A. (2026) Principal component analysis of factors influencing the choice of procurement methods for the procurement of construction materials in Ghana. Engineering, Construction and Architectural Management, 33(7), pp. 5300-5317. ISSN 0969-9988

Obonyo, E (2012) Developing enhanced, lignocellulosic fibre reinforcement for low-cost, cementitious, construction materials. Architectural Engineering and Design Management, 8(1), pp. 30-41. ISSN 1745-2007

Obonyo, E; Anumba, C and Thorpe, T (2005) Apron: An agent-based specification and procurement system for construction products. Engineering, Construction and Architectural Management, 12(4), pp. 329-350. ISSN 0969-9988

Ochoa Franco, L A (2004) Life cycle assessment of residential buildings. PhD thesis, Carnegie Mellon University, USA.

Odewole, A O (2020) Development of a collaborative innovation management framework to assist in the utilisation of agricultural waste as building materials in Nigeria. PhD thesis, University of Salford, UK.

Oechler, E; Molenaar, K R; Hallowell, M and Scott, S (2018) State-of-practice for risk-based quality assurance in state departments of transportation. Engineering, Construction and Architectural Management, 25(7), pp. 958-970. ISSN 0969-9988

Ogunlana, S O; Bhokha, S and Pinnemitr, N (2001) Application of artifical neural network (ANN) to forecast construction cost of buildings at the pre-design stage. Journal of Financial Management of Property and Construction, 6(3), pp. 179-192. ISSN 1366-4387

Ogunmakinde, O E (2019) Developing a circular-economy-based construction waste minimisation framework for Nigeria. PhD thesis, University of Newcastle, Australia.

Okon, B B (2013) Sustainable building services systems management. PhD thesis, University College London, UK.

Okonkwo, C; Evans, U F and Ekung, S (2023) Unearthing direct and indirect material waste-related factors underpinning cost overruns in construction projects. International Journal of Construction Management, 23(13), pp. 2298-2304. ISSN 1562-3599

Olatunji, O A; Orundami, A O and Ogundare, O (2018) Causal relationship between material price fluctuation and project's outturn costs. Built Environment Project and Asset Management, 8(4), pp. 358-371. ISSN 2044-124X

Olbina, S and Glick, S (2023) Using integrated hands-on and virtual reality (VR) or augmented reality (AR) approaches in construction management education. International Journal of Construction Education and Research, 19(3), pp. 341-360. ISSN 1557-8771

Ortlepp, R; Gruhler, K and Schiller, G (2018) Materials in Germany's domestic building stock: Calculation model and uncertainties. Building Research & Information, 46(2), pp. 164-178. ISSN 0961-3218

Osundiran, Adeola Oluwatoyin and Makgopa, Tshehla (2026) Port efficiency: The application of blockchain technology in the construction material supply chain. Journal of Construction Business and Management, 8(S1), pp. 48-61. ISSN 2521-0165

Oyewobi, L O; Olorunyomi, O S; Jimoh, R A and Rotimi, J O B (2020) Impact of social media usage on performance of construction businesses (CBS) in Abuja, Nigeria. Journal of Financial Management of Property and Construction, 26(2), pp. 257-278. ISSN 1366-4387

O’Connor, J T and Davis, V S (1988) Constructability improvement during field operations. Journal of Construction Engineering and Management, 114(4), pp. 548-564. ISSN 0733-9364

Pacheco-Torres, R; Etxebarria-Berrizbeitia, S and Gago, E J (2024) Influence of urban density on energy retrofit of building stock: Case study of Spain. Architectural Engineering and Design Management, 20(6), pp. 1832-1855. ISSN 1745-2007

Pahwa, J S (2009) MDSSF: a federated architecture for product procurement. PhD thesis, Cardiff University, UK.

Pararajasingam, R; Waidyasekara, A S and Victar, H C (2026) Exploring causes of ineffective material management and impact on successful project deliverables in civil engineering construction projects in Sri Lanka. Construction Innovation, 26(1), pp. 22-43. ISSN 1471-4175

Park, J and Tucker, R (2017) Overcoming barriers to the reuse of construction waste material in Australia: A review of the literature. International Journal of Construction Management, 17(3), pp. 228-237. ISSN 1562-3599

Park, K; Hwang, Y; Seo, S and Seo, H (2003) Quantitative assessment of environmental impacts on life cycle of highways. Journal of Construction Engineering and Management, 129(1), pp. 25-31. ISSN 0733-9364

Park, Y J; Gwak, H S and Lee, D E (2017) Dozer workability estimation method for economic dozing. Journal of Construction Engineering and Management, 143(2): 04016096, ISSN 0733-9364

Patel, K and Ruparathna, R (2023) Life cycle sustainability assessment of road infrastructure: A building information modeling-(BIM) based approach. International Journal of Construction Management, 23(11), pp. 1837-1846. ISSN 1562-3599

Pelé-Peltier, A; Charef, R and Morel, J C (2023) Factors affecting the use of earth material in mainstream construction: A critical review. Building Research & Information, 51(2), pp. 119-137. ISSN 0961-3218

Peng, J and Zhang, Q (2025) Construction group conflict under resource overlap: A game theory approach. Engineering, Construction and Architectural Management, 32(1), pp. 156-171. ISSN 0969-9988

Penteado Filho, P D A (1984) Productivity trends in the construction industry. PhD thesis, Cornell University, USA.

Perttula, P; Korhonen, P; Lehtelä, J; Rasa, P L; Kitinoja, J P; Mäkimattila, S and Leskinen, T (2006) Improving the safety and efficiency of materials transfer at a construction site by using an elevator. Journal of Construction Engineering and Management, 132(8), pp. 836-843. ISSN 0733-9364

Pesantes-Tavares, E R (2011) Construction worker health: A web-based approach to selecting alternatives to hazardous procedures. PhD thesis, University of Florida, USA.

Pham Van, B and Peansupap, V (2024) Confirmatory analysis on factors influencing the material management effectiveness in construction projects. Engineering, Construction and Architectural Management, 31(6), pp. 2536-2562. ISSN 0969-9988

Pieper, P J (1984) The measurement of real investment in structures and the construction productivity decline (deflation). PhD thesis, Northwestern University, USA.

Pilechiha, P; Norouziasas, A; Ghorbani Naeini, H and Jolma, K (2022) Evaluation of occupant's adaptive thermal comfort behaviour in naturally ventilated courtyard houses. Smart and Sustainable Built Environment, 11(4), pp. 793-811. ISSN 2046-6099

Polat, G; Arditi, D and Mungen, U (2007) Simulation-based decision support system for economical supply chain management of rebar. Journal of Construction Engineering and Management, 133(1), pp. 29-39. ISSN 0733-9364

Pomares, J C; Irles, R; Segovia, E and Ferrer, B (2014) Acceleration and deflection analysis for class C edge protection systems in construction work. Journal of Construction Engineering and Management, 140(8): 04014031, ISSN 0733-9364

Praticò, F G (2013) New road surfaces: Logical bases for simple quality-related pay adjustments. Journal of Construction Engineering and Management, 139(11): 4013020, ISSN 0733-9364

Praticò, F G and Giunta, M (2018) Proposal of a key performance indicator for railway track based on LCC and rams analyses. Journal of Construction Engineering and Management, 144(2): 04017104, ISSN 0733-9364

Prieto, A J; Silva, A; de Brito, J and Macias-Bernal, J M (2018) Serviceability of facade claddings. Building Research & Information, 46(2), pp. 179-12. ISSN 0961-3218

Rahmouni, S and Smail, R (2020) A design approach towards sustainable buildings in Algeria. Smart and Sustainable Built Environment, 9(3), pp. 229-245. ISSN 2046-6099

Rathnayake, B; Gunathilake, L; Edirisinghe, R and Perera, S (2025) Ecoconstruct: A blockchain-based system for carbon trading in construction projects. Construction Innovation, 25(7), pp. 213-234. ISSN 1471-4175

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Exploring the barriers for implementing waste trading practices in the construction industry in Australia. Built Environment Project and Asset Management, 11(4), pp. 559-576. ISSN 2044-124X

Ratnasabapathy, S; Alashwal, A and Perera, S (2021) Investigation of waste diversion rates in the construction and demolition sector in Australia. Built Environment Project and Asset Management, 11(3), pp. 427-439. ISSN 2044-124X

Reynolds, M F (1990) Facilities planning and construction internship. DEng thesis, Texas A&M University, USA.

Rodriguez-Ramos, W E (1982) Quantitative techniques for construction site layout planning. PhD thesis, University of Florida, USA.

Rodriguez-Ramos, W E and Francis, R L (1983) Single crane location optimization. Journal of Construction Engineering and Management, 109(4), pp. 387-397. ISSN 0733-9364

Rossetto, Daniel Marc (2024) Incentivising the recovery and utilisation of construction and demolition waste. PhD thesis, University of Adelaide, Australia.

Ruokamo, E; Franzini, F; Lähtinen, K and Toppinen, A (2024) To renovate or build with wood? Results from Finnish citizen survey data. Construction Management and Economics, 42(10), pp. 886-901. ISSN 01446193

Rustom, R N and Amer, M I (2006) Modeling the factors affecting quality in building construction projects in Gaza Strip. Journal of Construction Research, 7(1), pp. 33-47. ISSN 1609-9451

Safari, K and Ghandehariun, S (2026) An integrative BIM-based life cycle assessment framework to address uncertainties: A mixed-methods study under real construction project context. International Journal of Construction Management, 26(1), pp. 54-75. ISSN 1562-3599

Said, H; Rajagopalan, A and Hall, D M (2025) Longitudinal analysis of interorganizational collaborative networks of cross-laminated timber (CLT) construction. Construction Innovation, 25(6), pp. 1840-1864. ISSN 1471-4175

Said, H (2015) Prefabrication best practices and improvement opportunities for electrical construction. Journal of Construction Engineering and Management, 141(12): 04015045, ISSN 0733-9364

Said, H (2016) Modeling and likelihood prediction of prefabrication feasibility for electrical construction firms. Journal of Construction Engineering and Management, 142(2): 04015071, ISSN 0733-9364

Saidu, I; Shakantu, W; Adamu, A and Anugwo, I (2017) A bespoke approach for relating material waste to cost overrun in the construction indsutry. Journal of Construction Business and Management, 1(1), pp. 39-52. ISSN 2521-0165

Saleem, M; Al-Kutti, W A; Al-Akhras, N M and Haider, H (2016) Nondestructive testing procedure to evaluate the load-carrying capacity of concrete anchors. Journal of Construction Engineering and Management, 142(5): 04015104, ISSN 0733-9364

Saleem, M; Elshami, M M and Najjar, M (2017) Development, testing, and implementation strategy of a translucent concrete-based smart lane separator for increased traffic safety. Journal of Construction Engineering and Management, 143(5): 04016129, ISSN 0733-9364

Sameer, H and Bringezu, S (2021) Building information modelling application of material, water, and climate footprint analysis. Building Research & Information, 49(6), pp. 593-612. ISSN 0961-3218

Sandberg, N H and Bratteb, H (2012) Analysis of energy and carbon flows in the future Norwegian dwelling stock. Building Research & Information, 40(2), pp. 123-139. ISSN 0961-3218

Sanhudo, L P N (2021) Artificial intelligence for an enhanced as-is BIM energy analysis: Enabling an efficient energy retrofit through the automation of the scan-to-BIM process. PhD thesis, Universidade do Porto, Portugal.

Sanseverino, Anna (2023) Application of BIM methodology for structural inspection and maintenance eco-systems: Semi-automated monitoring procedures to implement different kinds of data into enriched cooperative systems. PhD thesis, Università degli Studi di Salerno, Italy.

Sarireh, M (2022) Examining the suitability of Tripoli as admixture in cement paste. International Journal of Construction Management, 22(16), pp. 3169-3174. ISSN 1562-3599

Sattineni, A (2014) A decision support framework for site safety monitoring using RFID and BIM. PhD thesis, University of Salford, UK.

Sawan, R; Low, J F and Schiffauerova, A (2018) Quality cost of material procurement in construction projects. Engineering, Construction and Architectural Management, 25(8), pp. 974-988. ISSN 0969-9988

Schubert, F N (1991) U.S. Army corps of engineers and Afghanistan's highways 1960–1967. Journal of Construction Engineering and Management, 117(3), pp. 445-459. ISSN 0733-9364

Schultmann, F and Rentz, O (2002) Scheduling of deconstruction projects under resource constraints. Construction Management and Economics, 20(5), pp. 391-401. ISSN 01446193

Seethapathy, S and Henderson, J H (2017) Management of construction waste in nuclear and thermal power plant projects in India. Journal of Construction in Developing Countries, 22(S1), pp. 19-46. ISSN 1823-6499

Sertyesihsik, B (2006) The effectiveness of the five-year development plans on the development of the construction sector. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Shakantu, W; Muya, M; Tookey, J and Bowen, P (2008) Flow modelling of construction site materials and waste logistics: A case study from Cape Town, South Africa. Engineering, Construction and Architectural Management, 15(5), pp. 423-439. ISSN 0969-9988

Shakantu, W; Tookey, J E and Bowen, P A (2003) The hidden cost of transportation of construction materials: An overview. Journal of Engineering, Design and Technology, 1(1), pp. 103-118. ISSN 1726-0531

Shan, Y; Goodrum, P M; Zhai, D; Haas, C and Caldas, C H (2011) The impact of management practices on mechanical construction productivity. Construction Management and Economics, 29(3), pp. 305-316. ISSN 1466433X

Shapira, A and Elbaz, A (2014) Tower crane cycle times: Case study of remote-control versus cab-control operation. Journal of Construction Engineering and Management, 140(12): 05014010, ISSN 0733-9364

Shelton, J; Martek, I and Chen, C (2016) Implementation of innovative technologies in small-scale construction firms: Five Australian case studies. Engineering, Construction and Architectural Management, 23(2), pp. 177-191. ISSN 0969-9988

Shi, G; Lu, D; Liu, Z; Du, X; Zhang, Q; Zhao, L and Wang, Z (2024) Material distribution planning method and experimental verification under multinode and multivehicle scene. Journal of Construction Engineering and Management, 150(11): 04024161, ISSN 0733-9364

Shiha, A and El-Adaway, I H (2026) From ports to projects: Estimating the impact of supply chain volatility and trade policy changes on construction material prices. Journal of Construction Engineering and Management, 152(6): 04026064, ISSN 0733-9364

Shiha, A; Dorra, E M and Nassar, K (2020) Neural networks model for prediction of construction material prices in Egypt using macroeconomic indicators. Journal of Construction Engineering and Management, 146(3): 04020010, ISSN 0733-9364

Shiha, A; Elazhary, M and El-Adaway, I H (2025) Price adjustment clauses: Enhanced price volatility forecasting for construction materials. Journal of Construction Engineering and Management, 151(9): 04025121, ISSN 0733-9364

Shipworth, D (2002) A stochastic framework for embodied greenhouse gas emissions modelling of construction materials. Building Research & Information, 30(1), pp. 16-24. ISSN 0961-3218

Shooshtarian, S; Caldera, S; Maqsood, T; Ryley, T and Khalfan, M (2022) An investigation into challenges and opportunities in the Australian construction and demolition waste management system. Engineering, Construction and Architectural Management, 29(10), pp. 4313-4330. ISSN 0969-9988

Simukonda, W and Kamwela, N (2021) The management of theft and vandalism on construction jobsites in the southern region of Malawi. Journal of Construction Business and Management, 5(1), pp. 47-59. ISSN 2521-0165

Sing, M C P; Fung, I W H; Edwards, D J and Liu, H (2022) Dynamic construction site layout planning: An application of branch and bond algorithm. International Journal of Building Pathology and Adaptation, 40(4), pp. 523-538. ISSN 23984708

Smitha, J S and Thomas, A (2021) Integrated model and index for circular economy in the built-environment in the Indian context. Construction Economics and Building, 21(3), pp. 198-220. ISSN 2204-9029

Sodagar, B; Rai, D; Jones, B; Wihan, J and Fieldson, R (2011) The carbon-reduction potential of straw-bale housing. Building Research & Information, 39(1), pp. 51-65. ISSN 0961-3218

Sohani, H; Seyed Hossein Hosseini, N and Saghatforoush, E (2024) The optimized form of building made from the reused elements. Architectural Engineering and Design Management, 20(2), pp. 191-213. ISSN 1745-2007

Song, J (2005) Tracking the location of materials on construction projects. PhD thesis, University of Texas at Austin, USA.

Song, J; Haas, C T and Caldas, C H (2006) Tracking the location of materials on construction job sites. Journal of Construction Engineering and Management, 132(9), pp. 911-918. ISSN 0733-9364

Sousa, Rita dos Santos (2019) Production planning and control methodology for soil bioengineering works. PhD thesis, Universidade Federal de Santa Maria, Brazil.

Steele, K (2003) A methodology to facilitate the environmental comparison of bridge management strategies. PhD thesis, University of Surrey, UK.

Stewart, J; Minchin, R E; Jaselskis, E J; Dayal, V and Smith, G (2004) Potential construction applications for thermoset composite scrap material. Journal of Construction Engineering and Management, 130(2), pp. 199-205. ISSN 0733-9364

Sundquist, V; Gadde, L-E and Hulthén, K (2018) Reorganizing construction logistics for improved performance. Construction Management and Economics, 36(1), pp. 49-65. ISSN 0144-6193

Suprun, Emiliya (2018) An integrated systems model of construction innovation in the Russian federation. PhD thesis, Griffith University, Russia.

Suriyanon, N; Sutheerawatthana, P; Rinchumphu, D and Suksawat, R (2025) Carbon footprint assessment of a precast concrete yard: A case study from Thailand. Construction Economics and Building, 25(2), pp. 43-68. ISSN 2204-9029

Swei, O (2020) Forecasting infidelity: Why current methods for predicting costs miss the mark. Journal of Construction Engineering and Management, 146(2): 04019100, ISSN 0733-9364

Sánchez Vivas, L; Costello, K; Mobley, S; Mihelcic, J R and Mullins, G (2022) Determination of safety factors for structural bamboo design applications. Architectural Engineering and Design Management, 18(1), pp. 26-37. ISSN 1745-2007

Talla, A and McIlwaine, S (2024) Industry 4.0 and the circular economy: Using design-stage digital technology to reduce construction waste. Smart and Sustainable Built Environment, 13(1), pp. 179-198. ISSN 2046-6099

Tam, V W Y; Shen, L Y; Fung, I W H and Wang, J Y (2007) Controlling construction waste by implementing governmental ordinances in Hong Kong. Construction Innovation, 7(2), pp. 149-166. ISSN 1471-4175

Tangtinthai, N (2016) Extraction, use and disposal of construction materials in Great Britain and Thailand. PhD thesis, University of Newcastle upon Tyne, UK.

Tanikawa, H and Hashimoto, S (2009) Urban stock over time: Spatial material stock analysis using 4d-GIS. Building Research & Information, 37(5-6), pp. 483-502. ISSN 0961-3218

Tatari, O and Kucukvar, M (2012) Eco-efficiency of construction materials: Data envelopment analysis. Journal of Construction Engineering and Management, 138(6), pp. 733-741. ISSN 0733-9364

Tatum, C B (2018) Learning construction engineering: Why, what, and how? Journal of Construction Engineering and Management, 144(3): 04018004, ISSN 0733-9364

Teizer, J; Venugopal, M; Teizer, W and Felkl, J (2012) Nanotechnology and its impact on construction: Bridging the gap between researchers and industry professionals. Journal of Construction Engineering and Management, 138(5), pp. 594-604. ISSN 0733-9364

Tennakoon, G A; Rameezdeen, R and Chileshe, N (2024) Walking the talk towards sustainable consumption: Interventions to promote the uptake of reprocessed construction materials. Engineering, Construction and Architectural Management, 31(7), pp. 2878-2899. ISSN 0969-9988

Thomas, Douglas N (2015) The increase of timber use in residential construction in Australia: Towards a sustainable residential development model. PhD thesis, University of Technology Sydney, Australia.

Thomas, H R; Riley, D R and Messner, J I (2005) Fundamental principles of site material management. Journal of Construction Engineering and Management, 131(7), pp. 808-815. ISSN 0733-9364

Thorpe, D and Wright, C (2015) Use of advanced and green construction materials by small and medium-sized enterprises. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Thuesen, C; Koch-Ørvad, N and Maslesa, E (2016) Organising sustainable transition: Understanding the product, project and service domain of the built environment. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Tserng, H P; Yin, S Y L and Li, S (2006) Developing a resource supply chain planning system for construction projects. Journal of Construction Engineering and Management, 132(4), pp. 393-407. ISSN 0733-9364

Uddin, M M (2011) Robust statistical methods for non-normal quality assurance data analysis in transportation projects. PhD thesis, University of Kentucky, USA.

Udeaja, C E and Tah, J H M (2001) Construction material supply chain management: Towards an agent-based technology. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Udeaja, Chika Emmanuel (2002) A decision support framework for construction material supply chain management using multi-agent systems. PhD thesis, London South Bank University, UK.

Ugwu, O O; Arop, J B; Nwoji, C U and Osadebe, N N (2013) Nanotechnology as a preventive engineering solution to highway infrastructure failures. Journal of Construction Engineering and Management, 139(8), pp. 987-993. ISSN 0733-9364

Uzuegbunam, F O; Isiofia, L A and Ibem, E O (2024) Assessment of susceptibility of buildings with different façade finishes to microbial decay in the hot-humid tropical environment of enugu, southeast Nigeria. International Journal of Building Pathology and Adaptation, 42(6), pp. 1106-1125. ISSN 2398-4708

Vahdatmanesh, M and Firouzi, A (2020) Construction material supply risk management using Asian option contracts: The case of a pipeline project. Engineering, Construction and Architectural Management, 27(10), pp. 3395-3414. ISSN 0969-9988

Vahidi, A (2025) Towards circular concrete: The implementation of circular concrete in the construction industry. PhD thesis, Delft University of Technology, Netherlands.

Vaidya, R (1981) The role of the construction industry in economic development: The case of Nepal. PhD thesis, Cornell University, USA.

Vatankhah, M; Vakilinezhad, R; Zakeri, S M H and Fattahi, K (2024) Optimizing energy and daylight performance of vernacular dwellings for contemporary architecture: A parametric analysis. Architectural Engineering and Design Management, 20(6), pp. 1795-1814. ISSN 1745-2007

Vidalakis, C; Tookey, J E and Sommerville, J (2011) Logistics simulation modelling across construction supply chains. Construction Innovation, 11(2), pp. 212-228. ISSN 1471-4175

Vieira, P M d S (2007) Environmental assessment of office buildings. PhD thesis, University of California, Berkeley, USA.

Viriyaroj, B; Kuittinen, M and Gheewala, S H (2024) Life-cycle GHG emissions of standard houses in Thailand. Buildings & Cities, 5(1), pp. 247-267. ISSN 2632-6655

Waldman, B; Huang, M and Simonen, K (2020) Embodied carbon in construction materials: A framework for quantifying data quality in epds. Buildings & Cities, 1(1), pp. 625-636. ISSN 2632-6655

Walker, L (2022) Scenario-based robustness assessment for low-emission building retrofit. DSc thesis, ETH Zürich, Switzerland.

Walsh, K D; Hershauer, J C; Tommelein, I D and Walsh, T A (2004) Strategic positioning of inventory to match demand in a capital projects supply chain. Journal of Construction Engineering and Management, 130(6), pp. 818-826. ISSN 0733-9364

Wan, S K M and Kumaraswamy, M M (2009) Industrial management approaches for improving material control in building services works. Engineering, Construction and Architectural Management, 16(3), pp. 208-223. ISSN 0969-9988

Wanaguru, K; Mallawaarachchi, H and Vijerathne, D (2025) Prisma-based review and development of a circularity assessment framework for building construction material selection. Built Environment Project and Asset Management, 15(3), pp. 557-573. ISSN 2044-124X

Wandahl, S; Jacobsen, A; Lassen, A H; Poulsen, S B and Srensen, H (2011) User-driven innovation in a construction material supply network. Construction Innovation, 11(4), pp. 399-415. ISSN 1471-4175

Wang, Y; Zhu, S and Wong, A S T (2014) Cooling time estimation of newly placed hot-mix asphalt pavement in different weather conditions. Journal of Construction Engineering and Management, 140(5): 04014009, ISSN 0733-9364

Wang, Z; Jia, L; Lv, J and Huang, J (2024) Minimization of rebar cutting waste using BIM and cutting pattern-oriented multiobjective optimization. Journal of Construction Engineering and Management, 150(11): 04024166, ISSN 0733-9364

Weiss, T (2021) Energy flexibility and shiftable heating power of building components and technologies. Smart and Sustainable Built Environment, 10(4), pp. 740-758. ISSN 2046-6099

Wilmot, C G and Mei, B (2005) Neural network modeling of highway construction costs. Journal of Construction Engineering and Management, 131(7), pp. 765-771. ISSN 0733-9364

Wong, F P K; Oldfield, P and Osmond, P (2024) Industry perceptions of mass engineered timber (met) construction: A comparison of South-East Asia with other regions. Architectural Engineering and Design Management, 20(6), pp. 1543-1565. ISSN 1745-2007

Wong, J K W; Bameri, F; Ahmadian Fard Fini, A and Maghrebi, M (2025) Tracking indoor construction progress by deep-learning-based analysis of site surveillance video. Construction Innovation, 25(2), pp. 461-489. ISSN 1471-4175

Wong, K C (2021) Factors affecting behavior of roadside construction workers in using personal protective equipment against dust and noise. PhD thesis, University of Hong Kong, Hong Kong.

Worrall, H; Norman, G and Flanagan, R (1995) Intervention analysis and overseas trade in UK construction-related materials and components. Construction Management and Economics, 13(6), pp. 475-484. ISSN 01446193

Xie, W; Zhao, T; Tang, J and Zhang, Y (2017) Arch first and beam later: Arch-rib integral installation construction technology for large-span tied-arch bridge. Journal of Construction Engineering and Management, 143(8): 04017059, ISSN 0733-9364

Xie, W; Zhao, T; Wang, H and Tang, J (2017) Construction techniques used to automatically pass standard box girders through special passenger-line tunnels. Journal of Construction Engineering and Management, 143(5): 05016027, ISSN 0733-9364

Xu, J; Shi, Y and Zhao, S (2019) Reverse logistics network-based multiperiod optimization for construction and demolition waste disposal. Journal of Construction Engineering and Management, 145(2): 04018124, ISSN 0733-9364

Xu, J; Teng, Y and Pan, W (2021) A BIM-LCA integrated method for enhancing efficiency of embodied carbon estimation of prefabricated high-rise buildings. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Xu, J and Zhao, S (2017) Noncooperative game-based equilibrium strategy to address the conflict between a construction company and selected suppliers. Journal of Construction Engineering and Management, 143(8): 04017051, ISSN 0733-9364

Xu, Yuqing (2025) Enhancing reliability and efficiency of upfront embodied carbon assessment leveraging openbim, llm, DES, and blockchain. PhD thesis, Hong Kong University of Science and Technology, Hong Kong.

Xue, X; Tan, X and Fan, H (2026) Mapping the trajectories of digital technology innovation in the construction industry: An integrated spnp and louvain approach. Engineering, Construction and Architectural Management, 33(1), pp. 477-508. ISSN 0969-9988

Yang, F (2022) Ascending the pagoda: A ground-up exploration of the ancient construction methods of dayanta using virtual reality. PhD thesis, Ohio State University, USA.

Yang, J (2001) A decision support system for material routing in construction sites. PhD thesis, University of Wolverhampton, UK.

Yang, W and Kohler, N (2008) Simulation of the evolution of the Chinese building and infrastructure stock. Building Research & Information, 36(1), pp. 1-19. ISSN 0961-3218

Yates, J K (2014) Design and construction for sustainable industrial construction. Journal of Construction Engineering and Management, 140(4): B4014005, ISSN 0733-9364

Ying, F; Tookey, J and Roberti, J (2014) Addressing effective construction logistics through the lens of vehicle movements. Engineering, Construction and Architectural Management, 21(3), pp. 261-275. ISSN 0969-9988

Yoon, Y; Patel, S; Ji, R and Hastak, M (2017) Current state of reflective cracking in the United States. Journal of Construction Engineering and Management, 143(3): 04016099, ISSN 0733-9364

Young-Corbett, D E (2014) Prevention through design: Health hazards in asphalt roofing. Journal of Construction Engineering and Management, 140(9): 06014007, ISSN 0733-9364

Yussupov, A N and Yussupova, A A (2022) Ecological houses of southern Kazakhstan using renewable energy sources. Smart and Sustainable Built Environment, 11(3), pp. 593-607. ISSN 2046-6099

Zafar, I; Wuni, I Y; Shen, G Q P; Ahmed, S and Yousaf, T (2022) A fuzzy synthetic evaluation analysis of time overrun risk factors in highway projects of terrorism-affected countries: The case of Pakistan. International Journal of Construction Management, 22(4), pp. 732-750. ISSN 1562-3599

Zami, M S (2010) Understanding the factors that influence the adoption of stabilised earth by construction professionals to address the Zimbabwe urban low cost housing crisis. PhD thesis, University of Salford, UK.

Zami, M S (2022) Barriers hindering acceptance of earth construction in the urban context of the United Kingdom. Architectural Engineering and Design Management, 18(6), pp. 941-958. ISSN 1745-2007

Zea Escamilla, E (2015) Development of simplified life cycle assessment methodology for construction materials and buildings outside of the European context through the use of geographic information systems. DSc thesis, ETH Zürich, Switzerland.

Zhang, L; Wu, X and Liu, H (2016) Strategies to reduce ground settlement from shallow tunnel excavation: A case study in China. Journal of Construction Engineering and Management, 142(5): 04016001, ISSN 0733-9364

Zhang, Y; Zhang, M; Gao, F and Li, J (2025) Inverse problem method application in building physics numerical optimization: New insight into ideal envelope properties determination. Architectural Engineering and Design Management, 21(2), pp. 252-267. ISSN 1745-2007

Zhang, Z J; Li, M G; Chen, J J; Wang, J H and Zeng, F Y (2017) Innovative construction method for oversized excavations with bipartition walls. Journal of Construction Engineering and Management, 143(8): 04017056, ISSN 0733-9364

Zhao, B; Yu, Y; Xu, Y and Guo, H (2024) Bamboo as a sustainable construction material for residential buildings in the cold and severe cold regions of China. Architectural Engineering and Design Management, 20(6), pp. 1511-1528. ISSN 1745-2007

de Oliveira, R (1994) A methodology for housing design. PhD thesis, University of Waterloo, Canada.

ng, S T; Fang, Y and Ugwu, O O (2008) Modelling construction material logistics system with stochastic Petri nets. Construction Innovation, 8(1), pp. 46-60. ISSN 1471-4175

van der Kuyp, D J (2018) Strategies construction managerial leaders use to counteract material cost overruns. PhD thesis, Walden University, USA.